Steam & Water Analysis Products & Systems
Sample Conditioning
Sample Coolers High Capacity High ef ficiency, counter-flow sample coolers. Stainless steel contsruction. Removeable shell for easy clean in place. Pressure/ temperature rating, 5000 psi at 1000˚F.
Request Bulletin W9150
Low Capacity Welded shell, counter-flow design. Available in 316 SS and Inconel.
Request Bulletin W9000
High Temp Shut-Of f Valves Shuts of f sample flow when temperature gets too hot. Rated up to 6000 psi. No reset required. All stainless construction. Various temperature set tings. Request Bulletin W270
High Pressure Reducers Adjustable pressure reducer is interchangeable with other brands. All 316 stainless steel wet ted parts. Crank-assisted handwheel and blow-by step in reduction rod provides easier clean out and adjustment. Pressure/temperature rating, 5000 psi at 300˚F. Request Bulletin W6501
FTA Valves and Retrofits Provides independent secondary temperature control of individual sample lines in a compact, economical package. Local temperatrue adjustment and indication provided for each sample line. All wet ted parts stainless steel. Insulated stainless steel bath. Chiller, pump, and level controls optional. Request Bulletin WFTA
Sparger Assembly Used to prepare a sample for taking a degassed cation conductivity measurement. Options include conductivity analyzer and nitrogen generator.
Request Application Bulletin W7950 Waters Model 7951-01 Sparger with Model W7950-10 Nitrogen Generator
Refillable Resin Columns Available in many sizes as direct replacements to more expensive disposables. Auto shut-of f valved quick disconnects available. Request Bulletin W7901
Sample Conditioning
Por table QC Car t Allows online verification of analy tical instruments and direct measurement of pre-conditioned samples throughout the plant. Easily moved to point of use, eliminating transfer line contamination and delays caused by lengthy tubing runs. Request Bulletin WB357
Water Chiller A water chiller provides controlled temperature water (coolant) to a group of secondary sample coolers in order to ensure closely controlled sample temperatures. Airand water-cooled models available. Request Bulletins WANQA & WANQW
Por table Sampler Easily moved throughout the plant. Can sample any source from 5000 psi at 1000˚F to 2 psia at 250˚F. All wet ted parts stainless steel or acrylic. With or without gear pump. Request Bulletin W3150
Grab Sample Station Includes all components necessary for obtaining a grab sample from smaller boilers. Completely assembled. Saves time on installation. Pressure/temperature rating, 1000 psi at 450˚F.
Request Bulletin W3000
Cooling Water Isolation Skid Allows utilization of high-solids cooling water supplies as primary cooling water source. Ideal for use with surface water or mineral laden well water supplies. Options include dual heat exchangers and auto switchover to stand-by circulation pump. Request Bulletin WCWIS
Conditioning Modules
Single point sample panels can be easily customized to condition a wide variety of samples. Available with conductivity, pH, DO, or similar analyzers. Press/temp rating to 4000 psi at 1000 °F. Request Bulletin W3100
Dual-Cooler Module Modular Primar y Rack with FTA Secondar y Temperature Control
Wall Mount Module
Free Standing Rack with DO Analy zer
Steam & Water Lifting rings
Grab sample sink with drip lip
• Full height NEMA rated enclosures • 7 ga faceplate
Recessed stainless steel calibration sink for pH, ORP DO, or other frequently calibrated sensors
Full height dry section
Sequencing valve manifolds
Blowdown heat exchanger
Filters with manual purge valves
FTA secondary temperature control bath and valves Drip pan under resin columns and conductivity sensors
Analysis Systems Hazardous Areas
Primary Cooling Racks
Areas with Limited Rear Access
Plug-and-play climate-controlled enclosed sample panel with lab
For further information, contact:
966 Blue Ribbon Circle North • Oconomowoc, WI 53066 Phone: 262 200 2240 • Toll Free: 855 699 8700 • Fax: 262 567 4523 E-mail:
[email protected] Web site: www.watersequipment.com © Waters Equipment
07/14 W1210 Rev 2