Span 500 Instruction Manual
DESIGNATION SPAN 500 Double Width EN 1004 – 3 — 8/12 — XXXD SPAN 500 Single Width EN 1004 — 3 — 8/8 — XXXD
CEN designation of this instruction manual EN 1298 — IM — en Rev-02
SPECIFIC PRODUCT INFORMATION
WARNING
NEVER STAND ONquantities AN Table of parts and UNGUARDED PLATFORM
Span 400 Double Width Towers - 2m, 2.5m and 3m lengths to EN1004 and WAHR
SAFE WORKING Platform Height (m)LOADS AND WORKING HEIGHTS 2m
4m
6m
8m
10m
12m
The safe working of whether or Work Height (m) load at each level of platform is 275kg evnly distributed, 4m 6m regardless 8m 10m 12mone 14m two platforms are installed. Therefore, even if two platforms are installed side by side, total cumulative load shall not exceed 275kg distributed. Tower Height (m) 3m 5m 7m 9m 11m 13m Tower Weight in kg length)structure should not exceed 720kg. 124Normal 178 maximum 231 platform 291 345 398 The total loading on (2m the tower height for indoor use is 12m for Double Width, and 8m for Single Width. For outdoor use, the maximum height is 8m for Tower and Weight in kgWidths. (2.5m length) 137 198 258 325 385 445 Single Double Tower Weight in kg (3m length)
148
213
279
350
415
480
Note: Quoted platform heights included 150mm leg adjustment for levelling that can be increased or reduced
ASSEMBLY PROCESS
10cm
Description
Weight (kg)
1. Preparation 4 Rung Frame 9.3 • Locate the tower level adjusters on each leg at 10cm 3 (4 Rung Frame 5.8 inches) from the bottom of the leg.
2
4
6
8
10
12
2
2
2
Unlocked 2 2
2
• UnlockPlatform the interlock clips on Trapdoor (2m, 2.5m, 3m)all frames.14 18 20 • When installed, always move the interlock clip to the Fixed Platform (2m, 2.5m, 3m) 14 17 20 “locked” position.
1
2
3
4 5 Locked
6
1
2
3
6
• Sort the Brace braces(2m, into 2.5m, horizontal Horizontal 3m) and diagonal 1.7 braces 2 - 2.4 the diagonals are slightly longer. Diagonal Brace (2m, 2.5m, 3m) 1.8 2.2 2.5 • Unlock the brace locks.
1
5
9
4 5 Unlocked 13 17
21
4
8
12
16 Locked 20
24
Guard-rail bracing frame (2m, 2.5m, 3m)
5.2
2
2
2
2
2
2
Inclined ladder 6.9 2. Base Telescopic Stabiliser 5.2 Step 1: Install castor into adjustable leg. Large Stabiliser Step 2: Ensure interlock clips are released from 6.8 the base frames (bottom frames). Adjustable Legs 1.1 Step 3: Install castor / leg assembly to frame by pushing leg into the frame tube. This should be Castor / the Baseplate 2.2done with manual force only, no tools. Toe-board set (2m, 2.5m, 3m) 8.7 11.5 14.4 Step 4: Lock castors before ascending any part of the tower.
1
2
1
4
5
6
3.8
4.4
4
Note the locking and unlocking position for the 4 castors4 as shown here.
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
1
Unlocked 1 1
1
Locked 1
1
3. Locking down the platform (Windlock) A windlock clip is installed on the platform at the hook. This is locked as shown here.
02 05 01
Unlocked
Locked
USAGE ADVICE SPECIFIC PRODUCT INFORMATION
• We recommend a minimum of two people to assemble, dismantle and move the platform tower. Table ofthat parts quantities • Check all and components are on site and in good working order. • Ensure that the assembly location is checked to prevent hazards during assembly, dismantling or moving Span 400working Double Towers - 2m, 2.5m should and 3m to ground EN1004 and WAHR and while onWidth the tower. Particular attention be lengths given to the condition, whether level or sloping, obstructions and wind conditions. The ground condition must be capable of supporting the tower Platform 2m 4m 6m 8m 10m 12m structure. Height (m) • Work Towers must(m) always be climbed from the inside of the assembly 4m using the Height 6mladder.8m
10m
12m
14m
• Adjustable legs must only be used to level the tower. Tower Height (m) 3m 5m 7m 9m 11m 13m • If the adjustable legs are to be extended by more than 150 mm; a risk assessment needs first to be undertaken Tower Weight in kg (2m length) 124 178 231 291 345 398 by a competent person. • Tower LiftingWeight of components must be done inside the effective base area tower;258 components normally in kg (2.5m length) 137of the198 325 are385 445 hoisted using a rope. Weight in kgmust (3m only length) 148 of the 213tower. 279 • Tower Moving the tower be done by manual effect from the base
350
415
480
• Note: WhenQuoted movingplatform tower heights be aware of overhead (e.g. electric cables). included 150mmhazards leg adjustment for levelling that can be increased or reduced • No personnel or material to be on the platform whilst the tower is being moved. Weight (kg) Description • Beware of horizontal loads which can lead to instability of the tower. The maximum side force is 20kg. 4 Rung Frame 9.3 2 4 6 8 10 12 • When tying-in the tower, attach a tie to each upright at 4m height intervals. Ensure that couplers are suitable for 50mm diameter aluminum tube. 3 Rung Frame 5.8 2 2 2 2 2 2 • Do not use boxes or steps to gain additional height. If extra height required, contact your distributor to get extra Trapdoor Platform (2m, 2.5m, 3m) 14 18 20 1 2 3 4 5 6 components. • Fixed Do not lift or suspend an assembled mobile Platform (2m, 2.5m, 3m) 14 tower. 17
20 1 2 3 4 5 6 • Damaged components or components from other tower systems must never be used. Horizontal Brace (2m, 2.5m, 3m) 1.7 2 2.4 1 5 9 13 17 21 • Stabilisers should always be fitted when specified. Use the stabiliser shown on the component list according to the towerBrace height. Diagonal (2m, 2.5m, 3m) 1.8 2.2 2.5 4 8 12 16 20 24 • When wind exceeds Beaufort force 4, cease using the tower. Guard-rail bracing frame (2m, 2.5m, 3m) 3.8 4.4 5.2 2 2 • If wind is expected to reach Beaufort force 6, tie tower to a rigid structure. Inclined ladder 6.9 1 2 • If winds of Force 8 are forecast, dismantle the tower or remove to shelter. Telescopic Stabiliser 5.2 4 4
4 Adjustable Legs 18 6 31 Castor 8 / Baseplate48
2
2
2
1
4
5
6
4
4
4
Wind speeds
Large Stabiliser Force Peak mph
2
Peak km/h
6.8 m/s Peak
Guidance 4
29
8.1 1.1 13.9 2.2 20.8
Moderate breeze - raises dust 4 4 4 & loose 4 paper4 4 Strong breeze - difficult to use umbrella 4 4 4 Gale4force - 4walking 4is difficult
50 74
Toe-board set (2m, 2.5m, 3m) CARE AND MAINTENANCE
8.7
11.5
14.4
1
1
1
1
1
1
• Keep all equipment clean, especially spigots and sockets where frames join. Spigots should fit easily into sockets. Lubricate with light oil. • Remove dirt or paint from adjustable legs with a light brush, lightly oil the leg locks. • Do not strike or hammer components. Do not throw or drop onto hard surfaces. • Lightly oil spring mechanism of the hooks. • For transport and storage, components are best stored vertically. • Damaged parts must be repaired or replaced; refer to the Instant Upright website for further advice or contact your equipment supplier for advice.
03 05 02
MOVING SPECIFICTOWERS PRODUCT INFORMATION To Move the tower to a new position, first prepare the tower. Table of parts and quantities • Check that the wind speed does not exceed 29km/h (8.1m/s). • Span Ensure tower isWidth empty (material personnel). 400the Double Towers and - 2m, 2.5m and 3m lengths to EN1004 and WAHR • Check for overhead obstructions including electrical cables. Height (m) feet (only enough to clear obstructions). 2m 4m 6m 8m 10m 12m • Platform Raise the stabiliser • Work Taking care to ensure tower stability is maintained, insert any extended adjustable completely Height (m) 4m 6m 8m legs 10m 12m into14m the frame. • Tower Release the(m) castor brakes. Height 3m 5m 7m 9m 11m 13m • Carefully move the tower by manually applying force at the base. Do not use mechanical means to move Tower 124 178 231 291 345 398 the Weight tower. in kg (2m length) • Once positioned prepare the tower for use. Tower Weight in kg (2.5m length) 137 198 258 325 385 445 • Check and adjust as necessary to ensure all castors and stabilisers are in firm contact with the ground. Weight (3m length) 148 213 279 350 415 480 • Tower Check that in thekgtower is vertical using a spirit level. • Reapply the castor brakes. Note: Quoted platform heights included 150mm leg adjustment for levelling that can be increased or reduced
Description EXPLODED VIEW 4 Rung Frame
9.3
2
4
6
8
10
12
3 Rung Frame
5.8
2
2
2
2
2
2
Trapdoor Platform (2m, 2.5m, 3m)
14
18
20
1
2
3
4
5
6
Fixed Platform (2m, 2.5m, 3m)
14
17
20
1
2
3
4
5
6
Horizontal Brace (2m, 2.5m, 3m)
1.7
2
2.4
1
5
9
13
17
21
Diagonal Brace (2m, 2.5m, 3m)
1.8
2.2
2.5
4
8
12
16
20
24
Guard-rail bracing frame (2m, 2.5m, 3m)
3.8
4.4
5.2
2
2
2
2
2
2
4
5
6
4
4
4
Inclined ladder
6.9
1
2
1
Telescopic Stabiliser
5.2
4
4
4
Large Stabiliser
6.8
Adjustable Legs
1.1
4
4
4
4
4
4
Castor / Baseplate
2.2
4
4
4
4
4
4
1
1Span 500 1 - single 1width
1
1
Toe-board set (2m, 2.5m, 3m) Span 500 - double width
04 05 03
Weight (kg)
8.7
11.5
14.4
01.
Castor
06.
4 Rung Frame
11. 2 Rung Ladder Frame
02.
Adjustable Leg
07.
Toe-board set
12. Stabiliser
03.
2 Rung Frame
08.
Horizontal Brace
04.
Diagonal Brace
09.
4 Rung Ladder Frame
05.
Platform
10.
Clip
SPECIFIC PRODUCT INFORMATION STABILISERS
Table of parts and quantities Outriggers are to be used, when specified, to guarantee the structural stability of the tower. In addition, the ballast400 tableDouble is to be observed. Span Width Towers - 2m, 2.5m and 3m lengths to EN1004 and WAHR Platform Height (m)
2m
4m
6m
8m
10m
12m
Work Height (m)
4m
6m
8m
10m
12m
14m
Tower Height (m)
3m
5m
7m
9m
11m
13m
Tower Weight in kg (2m length)
124
178
231
291
345
398
Tower Weight in kg (2.5m length)
137
198
258
325
385
445
Tower Weight in kg (3m length)
148
213
279
350
415
480
Note: Quoted platform heights included 150mm leg adjustment for levelling that can be increased or reduced
Description
Weight (kg)
4 Rung Frame
9.3
2
4
6
8
10
12
3 Rung Frame
5.8
2
2
2
2
2
2
Trapdoor Platform (2m, 2.5m, 3m)
14
18
20
1
2
3
4
5
6
Fixed Platform (2m, 2.5m, 3m)
14
17
20
1
2
3
4
5
6
Horizontal Brace (2m, 2.5m, 3m)
1.7
2
2.4
1
5
9
13
17
21
Diagonal Brace (2m, 2.5m, 3m)
1.8
2.2
2.5
4
8
12
16
20
24
Guard-rail bracing frame (2m, 2.5m, 3m)
3.8
4.4
5.2
2
2
2
2
2
2
6.9 Fig 3
1
2
1
Fig 44
5
6
5.2
4
4
4
STABILISER SIZE 6.8IS CORRECT AND ABLE TO 4
4
4
4
4
Inclined ladder
Fig 2
Telescopic Stabiliser
ALWAYS ENSURE Large Stabiliser SUPPORT TOWER
Adjustable Legs
1.1
4
4
4
4
Lightly tighten the upper clamps above the third rung on each corner post. Position the lower clamp above the 4 4so that the 4 footpads 4 are 4 Castor Baseplate 2.2possible. Position 4 the stabilisers bottom /rung. Ensure the lower arm is as horizontal as approximately equidistant from each other, as shown in Fig.2. Adjust the outrigger and reposition the clamps as
Toe-board (2m, 2.5m, 3m)with the ground. 8.7 Ensure 11.5the clips 14.4with locking 1 1 are in place. 1 1 in the1 correct1 required toset make firm contact pin When position, tighten the clamps firmly.
To position the tower against a wall, do not remove the stabiliser; move parallel with the wall. (Fig.3) To position the tower in a corner, remove the inside stabiliser and place the outside two parallel with the wall. (Fig.4) Ballast weight maybe used to stabilise the tower, please contact your supplier for the correct amount of ballast weight required.
05 04 05
SPECIFIC PRODUCT INFORMATION SPECIFIC PRODUCT INFORMATION Table of parts and quantities
Table of parts and quantities
Span 400 Double Width Towers - 2m, 2.5m and 3m lengths to EN1004 and WAHR Span 500 Double Width Towers - 2m, 2.5m and 3m lengths to EN1004 Platform Height (m) (m) Platform Height
4m 2m 5m
2m
3m
Work Height (m)
4
5
6
7
Tower Height (m)
3
4
5
6
123
149
Work Height (m) Tower Weight kg (2m in length) Tower Heightin(m)
4m
173 3m 185
Tower Weight in kg (2.5m in length)
136
168
193
Tower Weight in kg (3m in length)
148
182
209
Tower Weight in kg (2m length)
124
206 223
6m 4m 8
6m
7
223 5m
7m 6m
8m8m9m
9
10
11
8
9
10
8m
10m
235 7m
2799m292
250
263
313
326
271
285
339
353
178
231
291
10m 10m 12
Description
Weight (kg)
3m
1
2
4m 5m 6m 148 213
14
12
13
14m
329 11m
342 13m 379
11
370
383
426
400
414
462
345
398 445
7m 8m 9m 10m 11m 12m 279 350 415 480 5
6
6
2for levelling 4 RungQuoted Ladder platform Frame heights included 150mm 12.6 1 2 3 be increased 4 or reduced 5 5 3 can 4 Note: leg adjustment that
6
6
4 Rung Frame
9.3
2 Rung Frame
5.8
2 Rung Ladder Frame
7.2
Description
Platform 4Trapdoor Rung Frame
2
1
1
1
1
1
1
1
1
18
20
9.31
2
2
17
20
1
1
1
Horizontal Brace
1.7
2
2.4
6
6
10
18 4
6 20
8
17
20
4
4
Telescopic Stabiliser (50430)
Adjustable Leg Horizontal Brace (2m, 2.5m, 3m) Castor / Baseplate
Diagonal (2m, 2.5m, 3m)8.7 Toe-board Brace set Guard-rail bracing frame (2m, 2.5m, 3m)
5.2 6.8
14
1.1 1.7
5.8
2
2.2
4 4
11.51.8 14.4 2.2 1
3.8
5
1
14
Fixed Platform (2m, 2.5m, 3m) Large Stabiliser (9090)
4
1
Weight (kg)
2.2 14 2.5
4
1
14
Diagonal Brace Trapdoor Platform (2m, 2.5m, 3m)1.8
3
3
1
Fixed Platform
3 Rung Frame
4.4
4 2.4 4
2.5 1 5.2
4 4 1
2 2 1 1 1
2
43
36
4
1
1
1
1
14
14
18
212
14 3
16
4
4
3
4
4
4 9
4
4
4
1
1
10 10 4 4
2
2
54
4
4
4
4
2
8 2
13
105
512
6
1
1
1
1
22
22
26
18
520
226
24
4
54
4
6
4
4
174
4 21
4
4
4
18
4
2
4
12
2
2
2
2
2
2
4
5
6
4
4
4
1
201
2
81
1
16
4
24 1
Inclined ladder
6.9
1
2
1
Telescopic Stabiliser
5.2
4
4
4
Large Stabiliser
6.8
Adjustable Legs
1.1
4
4
4
4
4
4
Castor / Baseplate
2.2
4
4
4
4
4
4
1
1
1
1
1
1
Toe-board set (2m, 2.5m, 3m)
06 05
2m
13
12m
Note: Quoted platform included 150mm (6 inches) leg adjustment for137 leveling 198 that can be increased or reduced Tower Weight in kg heights (2.5m length) 258 325 385
Tower Weight in kg (3m length)
11m 12m 12m
8.7
11.5
14.4
1
SPECIFIC PRODUCT INFORMATION DOUBLE WIDTH TOWER - 6m Table of parts and quantities 1
2
Span 400 Double Width Towers - 2m, 2.5m and 3m lengths to EN1004 and WAHR Platform Height (m)
2m
4m
6m
8m
10m
12m
Work Height (m)
4m
6m
8m
10m
12m
14m
Tower Height (m)
3m
5m
7m
9m
11m
13m
Tower Weight in kg (2m length)
124
178
231
291
345
398
Tower Weight in kg (2.5m length)
137
198
258
325
385
445
148
213
279
350
415
480
3Tower Weight in kg (3m length)
4
Note: Quoted platform heights included 150mm leg adjustment for levelling that can be increased or reduced
Description
Weight (kg)
4 Rung Frame
9.3
2
4
6
8
10
12
3 Rung Frame
5.8
2
2
2
2
2
2
Trapdoor Platform (2m, 2.5m, 3m)
14
18
20
1
2
3
4
5
6
Fixed Platform (2m, 2.5m, 3m)
14
17
20
1
2
3
4
5
6
Horizontal Brace (2m, 2.5m, 3m)
1.7
2
2.4
1
5
9
13
17
21
Diagonal Brace (2m, 2.5m, 3m)
1.8
2.2
2.5
4
8
12
16
20
24
Guard-rail bracing frame (2m, 2.5m, 3m)
3.8
4.4
5.2
2
2
2
2
2
2
4
5
6
4
4
4
5
Inclined ladder
6.9
1
2
1
Telescopic Stabiliser
5.2
4
4
4
Large Stabiliser
6.8
Adjustable Legs
1.1
4
4
4
4
4
4
Castor / Baseplate
2.2
4
4
4
4
4
4
1
1
1
1
1
1
7Toe-board set (2m, 2.5m, 3m)
07 05
6
8.7
11.5
8 14.4
SPECIFIC PRODUCT INFORMATION DOUBLE WIDTH TOWER - 6m Table of parts and quantities 9
10
Span 400 Double Width Towers - 2m, 2.5m and 3m lengths to EN1004 and WAHR Platform Height (m)
2m
4m
6m
8m
10m
12m
Work Height (m)
4m
6m
8m
10m
12m
14m
Tower Height (m)
3m
5m
7m
9m
11m
13m
Tower Weight in kg (2m length)
124
178
231
291
345
398
Tower Weight in kg (2.5m length)
137
198
258
325
385
445
148
213
279
350
415
480
11Tower Weight in kg (3m length)
12
Note: Quoted platform heights included 150mm leg adjustment for levelling that can be increased or reduced
Description
Weight (kg)
4 Rung Frame
9.3
2
4
6
8
10
12
3 Rung Frame
5.8
2
2
2
2
2
2
Trapdoor Platform (2m, 2.5m, 3m)
14
18
20
1
2
3
4
5
6
Fixed Platform (2m, 2.5m, 3m)
14
17
20
1
2
3
4
5
6
Horizontal Brace (2m, 2.5m, 3m)
1.7
2
2.4
1
5
9
13
17
21
Diagonal Brace (2m, 2.5m, 3m)
1.8
2.2
2.5
4
8
12
16
20
24
Guard-rail bracing frame (2m, 2.5m, 3m)
3.8
4.4
5.2
2
2
2
2
2
2
4
5
6
4
4
4
13
Inclined ladder
6.9
1
2
1
Telescopic Stabiliser
5.2
4
4
4
Large Stabiliser
6.8
Adjustable Legs
1.1
4
4
4
4
4
4
Castor / Baseplate
2.2
4
4
4
4
4
4
1
1
1
1
1
1
15Toe-board set (2m, 2.5m, 3m)
08 05
14
8.7
11.5
16 14.4
SPECIFIC PRODUCT INFORMATION DOUBLE WIDTH TOWER - 6m Table of parts and quantities 17
Span 400 Double Width Towers - 2m, 2.5m and 3m lengths to EN1004 and WAHR Platform Height (m)
2m
4m
6m
8m
10m
12m
Work Height (m)
4m
6m
8m
10m
12m
14m
Tower Height (m)
3m
5m
7m
9m
11m
13m
Tower Weight in kg (2m length)
124
178
231
291
345
398
Tower Weight in kg (2.5m length)
137
198
258
325
385
445
Tower Weight in kg (3m length)
148
213
279
350
415
480
Note: Quoted platform heights included 150mm leg adjustment for levelling that can be increased or reduced
Description
Weight (kg)
4 Rung Frame
9.3
2
4
6
8
10
12
3 Rung Frame
5.8
2
2
2
2
2
2
Trapdoor Platform (2m, 2.5m, 3m)
14
18
20
1
2
3
4
5
6
Fixed Platform (2m, 2.5m, 3m)
14
17
20
1
2
3
4
5
6
Horizontal Brace (2m, 2.5m, 3m)
1.7
2
2.4
1
5
9
13
17
21
Diagonal Brace (2m, 2.5m, 3m)
1.8
2.2
2.5
4
8
12
16
20
24
Guard-rail bracing frame (2m, 2.5m, 3m)
3.8
4.4
5.2
2
2
2
2
2
2
4
5
6
4
4
4
Inclined ladder
6.9
1
2
1
Telescopic Stabiliser
5.2
4
4
4
Large Stabiliser
6.8
Adjustable Legs
1.1
4
4
4
4
4
4
Castor / Baseplate
2.2
4
4
4
4
4
4
1
1
1
1
1
1
Toe-board set (2m, 2.5m, 3m)
09 05
8.7
11.5
14.4
SPECIFIC PRODUCT INFORMATION DOUBLE WIDTH TOWER - 5m Table of parts and quantities 1
2
Span 400 Double Width Towers - 2m, 2.5m and 3m lengths to EN1004 and WAHR Platform Height (m)
2m
4m
6m
8m
10m
12m
Work Height (m)
4m
6m
8m
10m
12m
14m
Tower Height (m)
3m
5m
7m
9m
11m
13m
Tower Weight in kg (2m length)
124
178
231
291
345
398
Tower Weight in kg (2.5m length)
137
198
258
325
385
445
148
213
279
350
415
480
3Tower Weight in kg (3m length)
4
Note: Quoted platform heights included 150mm leg adjustment for levelling that can be increased or reduced
Description
Weight (kg)
4 Rung Frame
9.3
2
4
6
8
10
12
3 Rung Frame
5.8
2
2
2
2
2
2
Trapdoor Platform (2m, 2.5m, 3m)
14
18
20
1
2
3
4
5
6
Fixed Platform (2m, 2.5m, 3m)
14
17
20
1
2
3
4
5
6
Horizontal Brace (2m, 2.5m, 3m)
1.7
2
2.4
1
5
9
13
17
21
Diagonal Brace (2m, 2.5m, 3m)
1.8
2.2
2.5
4
8
12
16
20
24
Guard-rail bracing frame (2m, 2.5m, 3m)
3.8
4.4
5.2
2
2
2
2
2
2
4
5
6
4
4
4
5
Inclined ladder
6.9
1
2
1
Telescopic Stabiliser
5.2
4
4
4
Large Stabiliser
6.8
Adjustable Legs
1.1
4
4
4
4
4
4
Castor / Baseplate
2.2
4
4
4
4
4
4
1
1
1
1
1
1
7Toe-board set (2m, 2.5m, 3m)
10 05
6
8.7
11.5
8 14.4
SPECIFIC PRODUCT INFORMATION DOUBLE WIDTH TOWER - 5m Table of parts and quantities 9
10
Span 400 Double Width Towers - 2m, 2.5m and 3m lengths to EN1004 and WAHR Platform Height (m)
2m
4m
6m
8m
10m
12m
Work Height (m)
4m
6m
8m
10m
12m
14m
Tower Height (m)
3m
5m
7m
9m
11m
13m
Tower Weight in kg (2m length)
124
178
231
291
345
398
Tower Weight in kg (2.5m length)
137
198
258
325
385
445
148
213
279
350
415
480
11Tower Weight in kg (3m length)
12
Note: Quoted platform heights included 150mm leg adjustment for levelling that can be increased or reduced
Description
Weight (kg)
4 Rung Frame
9.3
2
4
6
8
10
12
3 Rung Frame
5.8
2
2
2
2
2
2
Trapdoor Platform (2m, 2.5m, 3m)
14
18
20
1
2
3
4
5
6
Fixed Platform (2m, 2.5m, 3m)
14
17
20
1
2
3
4
5
6
Horizontal Brace (2m, 2.5m, 3m)
1.7
2
2.4
1
5
9
13
17
21
Diagonal Brace (2m, 2.5m, 3m)
1.8
2.2
2.5
4
8
12
16
20
24
Guard-rail bracing frame (2m, 2.5m, 3m)
3.8
4.4
5.2
2
2
2
2
2
2
4
5
6
4
4
4
13
Inclined ladder
6.9
1
2
1
Telescopic Stabiliser
5.2
4
4
4
Large Stabiliser
6.8
Adjustable Legs
1.1
4
4
4
4
4
4
Castor / Baseplate
2.2
4
4
4
4
4
4
1
1
1
1
1
1
15Toe-board set (2m, 2.5m, 3m)
11 05
14
8.7
11.5
16 14.4
SPECIFIC PRODUCT INFORMATION DOUBLE WIDTH TOWER - 5m Table of parts and quantities 17
Span 400 Double Width Towers - 2m, 2.5m and 3m lengths to EN1004 and WAHR Platform Height (m)
2m
4m
6m
8m
10m
12m
Work Height (m)
4m
6m
8m
10m
12m
14m
Tower Height (m)
3m
5m
7m
9m
11m
13m
Tower Weight in kg (2m length)
124
178
231
291
345
398
Tower Weight in kg (2.5m length)
137
198
258
325
385
445
Tower Weight in kg (3m length)
148
213
279
350
415
480
Note: Quoted platform heights included 150mm leg adjustment for levelling that can be increased or reduced
Description
Weight (kg)
4 Rung Frame
9.3
2
4
6
8
10
12
3 Rung Frame
5.8
2
2
2
2
2
2
Trapdoor Platform (2m, 2.5m, 3m)
14
18
20
1
2
3
4
5
6
Fixed Platform (2m, 2.5m, 3m)
14
17
20
1
2
3
4
5
6
Horizontal Brace (2m, 2.5m, 3m)
1.7
2
2.4
1
5
9
13
17
21
Diagonal Brace (2m, 2.5m, 3m)
1.8
2.2
2.5
4
8
12
16
20
24
Guard-rail bracing frame (2m, 2.5m, 3m)
3.8
4.4
5.2
2
2
2
2
2
2
4
5
6
4
4
4
Inclined ladder
6.9
1
2
1
Telescopic Stabiliser
5.2
4
4
4
Large Stabiliser
6.8
Adjustable Legs
1.1
4
4
4
4
4
4
Castor / Baseplate
2.2
4
4
4
4
4
4
1
1
1
1
1
1
Toe-board set (2m, 2.5m, 3m)
12 05
8.7
11.5
14.4
SPECIFIC PRODUCT INFORMATION SPECIFIC PRODUCT INFORMATION Table of parts and quantities
Table of parts and quantities
Span 400 Double Width Towers - 2m, 2.5m and 3m lengths to EN1004 and WAHR Span 500 Single Width Towers - 2m, 2.5m and 3m lengths to EN1004 Platform Platform Height Height (m) (m)
2m 2m
4m 4m6m 5m8m 6m10m7m12m8m 3m
WorkHeight Height(m) (m) Work Tower Height (m) Tower Height (m) Tower Weight in kg (2m in length)
44m 3 3m 97
56m 6 8m 710m 8 12m 9 14m10 5 7 9 8 6 4 5m 7m 9m 11m 13m 149 182 191 230 120 139
10124 6
231 164 291 203345 213398258 13178 4 155
Tower length) TowerWeight Weightininkgkg(2m (2.5m in length)
176 219 229 278 TowerWeight Weightininkgkg(2.5m (3m in length) 114 Tower length) 137 144 198 166 258 325 385 445 Note: Quoted platform heights included 150mm (6 inches) leg adjustment for leveling that can be inTower Weight in kg (3m length) 148 213 279 350 415 480 creased or reduced
Description Weight (kg) 2m 3m 4m 5m or reduced 6m 7m Note: Quoted platform heights included 150mm leg adjustment for levelling that can be increased 4 Rung Frame
7.3 Weight (kg) 10.6
Description 4 Rung Ladder Frame
2
2
1
2
2
3
3
4
8m 4
3
4
4
RungFrame Frame 42Rung
4.5 9.3
12
4
1 6
8
1 10
12 1
2 Rung Ladder Frame 3 Rung Frame Trapdoor Platform Trapdoor Platform (2m, 2.5m, 3m) Horizontal Brace
5.9 5.8 18 18 2 2.2 17
1
2
1
2
1
2
Diagonal Brace Fixed Platform (2m, 2.5m, 3m)
14 14 1.7 1.8 14
Telescopic Stabiliser (50430) Horizontal Brace (2m, 2.5m, 3m) Large Stabiliser (9090) Diagonal Brace (2m, 2.5m, 3m) Adjustable Leg
1.7
Castor / bracing Baseplate Guard-rail frame (2m, 2.5m, 3m) Toe-board set Inclined ladder
20 20 2.4 2.5 20
2
1 5
1
2 5
2
2 2
9
3
2 9
2
3 4
13
5
3 13
1 4
6
17
21
32
4 3
5 4
6
5
7
6 8
4
4
4
9
4 13
4
17
4
21
12
16
2.4
1.8
5.2 2 6.8 2.2 1.1
2.5
4
3.8
2.2 4.4
5.2
42
42
4 2
4 2
4 2
4
2 4
1
1
1
1
1
1
6
8.7
1
5
4
11.5 14.4 6.9
4
1
2
5.2
Large Stabiliser
6.8
Adjustable Legs
1.1
4
4
Castor / Baseplate
2.2
4 1
8.7
11.5
4
4
8
Telescopic Stabiliser
Toe-board set (2m, 2.5m, 3m)
13 05
1
3
14.4
4
4
1
4
4
4
20
5
4
24
4 4
4
4
4
4
4
4
4
4
4
4
4
1
1
1
1
1
4 1
SPECIFIC PRODUCT INFORMATION SINGLE WIDTH TOWER - 6m Table of parts and quantities 1
2
Span 400 Double Width Towers - 2m, 2.5m and 3m lengths to EN1004 and WAHR Platform Height (m)
2m
4m
6m
8m
10m
12m
Work Height (m)
4m
6m
8m
10m
12m
14m
Tower Height (m)
3m
5m
7m
9m
11m
13m
Tower Weight in kg (2m length)
124
178
231
291
345
398
Tower Weight in kg (2.5m length)
137
198
258
325
385
445
148
213
279
350
415
480
3Tower Weight in kg (3m length)
4
Note: Quoted platform heights included 150mm leg adjustment for levelling that can be increased or reduced
Description
Weight (kg)
4 Rung Frame
9.3
2
4
6
8
10
12
3 Rung Frame
5.8
2
2
2
2
2
2
Trapdoor Platform (2m, 2.5m, 3m)
14
18
20
1
2
3
4
5
6
Fixed Platform (2m, 2.5m, 3m)
14
17
20
1
2
3
4
5
6
Horizontal Brace (2m, 2.5m, 3m)
1.7
2
2.4
1
5
9
13
17
21
Diagonal Brace (2m, 2.5m, 3m)
1.8
2.2
2.5
4
8
12
16
20
24
Guard-rail bracing frame (2m, 2.5m, 3m)
3.8
4.4
5.2
2
2
2
2
2
2
4
5
6
4
4
4
5
Inclined ladder
6.9
1
2
1
Telescopic Stabiliser
5.2
4
4
4
Large Stabiliser
6.8
Adjustable Legs
1.1
4
4
4
4
4
4
Castor / Baseplate
2.2
4
4
4
4
4
4
1
1
1
1
1
1
7Toe-board set (2m, 2.5m, 3m)
14 05
6
8.7
11.5
8 14.4
SPECIFIC PRODUCT INFORMATION SINGLE WIDTH TOWER - 6m Table of parts and quantities 9
10
Span 400 Double Width Towers - 2m, 2.5m and 3m lengths to EN1004 and WAHR Platform Height (m)
2m
4m
6m
8m
10m
12m
Work Height (m)
4m
6m
8m
10m
12m
14m
Tower Height (m)
3m
5m
7m
9m
11m
13m
Tower Weight in kg (2m length)
124
178
231
291
345
398
Tower Weight in kg (2.5m length)
137
198
258
325
385
445
148
213
279
350
415
480
11Tower Weight in kg (3m length)
12
Note: Quoted platform heights included 150mm leg adjustment for levelling that can be increased or reduced
Description
Weight (kg)
4 Rung Frame
9.3
2
4
6
8
10
12
3 Rung Frame
5.8
2
2
2
2
2
2
Trapdoor Platform (2m, 2.5m, 3m)
14
18
20
1
2
3
4
5
6
Fixed Platform (2m, 2.5m, 3m)
14
17
20
1
2
3
4
5
6
Horizontal Brace (2m, 2.5m, 3m)
1.7
2
2.4
1
5
9
13
17
21
Diagonal Brace (2m, 2.5m, 3m)
1.8
2.2
2.5
4
8
12
16
20
24
Guard-rail bracing frame (2m, 2.5m, 3m)
3.8
4.4
5.2
2
2
2
2
2
2
4
5
6
4
4
4
13
Inclined ladder
6.9
1
2
1
Telescopic Stabiliser
5.2
4
4
4
Large Stabiliser
6.8
Adjustable Legs
1.1
4
4
4
4
4
4
Castor / Baseplate
2.2
4
4
4
4
4
4
1
1
1
1
1
1
15Toe-board set (2m, 2.5m, 3m)
15 05
14
8.7
11.5
16 14.4
SPECIFIC PRODUCT INFORMATION SINGLE WIDTH TOWER - 5m Table of parts and quantities 1
2
Span 400 Double Width Towers - 2m, 2.5m and 3m lengths to EN1004 and WAHR Platform Height (m)
2m
4m
6m
8m
10m
12m
Work Height (m)
4m
6m
8m
10m
12m
14m
Tower Height (m)
3m
5m
7m
9m
11m
13m
Tower Weight in kg (2m length)
124
178
231
291
345
398
Tower Weight in kg (2.5m length)
137
198
258
325
385
445
148
213
279
350
415
480
3Tower Weight in kg (3m length)
4
Note: Quoted platform heights included 150mm leg adjustment for levelling that can be increased or reduced
Description
Weight (kg)
4 Rung Frame
9.3
2
4
6
8
10
12
3 Rung Frame
5.8
2
2
2
2
2
2
Trapdoor Platform (2m, 2.5m, 3m)
14
18
20
1
2
3
4
5
6
Fixed Platform (2m, 2.5m, 3m)
14
17
20
1
2
3
4
5
6
Horizontal Brace (2m, 2.5m, 3m)
1.7
2
2.4
1
5
9
13
17
21
Diagonal Brace (2m, 2.5m, 3m)
1.8
2.2
2.5
4
8
12
16
20
24
Guard-rail bracing frame (2m, 2.5m, 3m)
3.8
4.4
5.2
2
2
2
2
2
2
4
5
6
4
4
4
5
Inclined ladder
6.9
1
2
1
Telescopic Stabiliser
5.2
4
4
4
Large Stabiliser
6.8
Adjustable Legs
1.1
4
4
4
4
4
4
Castor / Baseplate
2.2
4
4
4
4
4
4
1
1
1
1
1
1
7Toe-board set (2m, 2.5m, 3m)
16 05
6
8.7
11.5
8 14.4
SPECIFIC PRODUCT INFORMATION SINGLE WIDTH TOWER - 5m Table of parts and quantities 9
10
Span 400 Double Width Towers - 2m, 2.5m and 3m lengths to EN1004 and WAHR Platform Height (m)
2m
4m
6m
8m
10m
12m
Work Height (m)
4m
6m
8m
10m
12m
14m
Tower Height (m)
3m
5m
7m
9m
11m
13m
Tower Weight in kg (2m length)
124
178
231
291
345
398
Tower Weight in kg (2.5m length)
137
198
258
325
385
445
148
213
279
350
415
480
11Tower Weight in kg (3m length)
12
Note: Quoted platform heights included 150mm leg adjustment for levelling that can be increased or reduced
Description
Weight (kg)
4 Rung Frame
9.3
2
4
6
8
10
12
3 Rung Frame
5.8
2
2
2
2
2
2
Trapdoor Platform (2m, 2.5m, 3m)
14
18
20
1
2
3
4
5
6
Fixed Platform (2m, 2.5m, 3m)
14
17
20
1
2
3
4
5
6
Horizontal Brace (2m, 2.5m, 3m)
1.7
2
2.4
1
5
9
13
17
21
Diagonal Brace (2m, 2.5m, 3m)
1.8
2.2
2.5
4
8
12
16
20
24
Guard-rail bracing frame (2m, 2.5m, 3m)
3.8
4.4
5.2
2
2
2
2
2
2
4
5
6
4
4
4
13
Inclined ladder
6.9
1
2
1
Telescopic Stabiliser
5.2
4
4
4
Large Stabiliser
6.8
Adjustable Legs
1.1
4
4
4
4
4
4
Castor / Baseplate
2.2
4
4
4
4
4
4
1
1
1
1
1
1
15Toe-board set (2m, 2.5m, 3m)
17 05
14
8.7
11.5
16 14.4
SINGLE WIDTH TOWER - 5m
17
18
18