SOLUTIONS Bulk Hose Reference Guide

The CNH “Hose & Fittings - Parker Hannifin” program supports a wide variety of hoses including braided, spiral, multipurpose, refrigerant and more. The entire offering has been tested by Parker Hannifin and approved to meet and exceed global standards. The CNH hose offering ranges in size from 1/ 4" (size -4) to 2" (size 32) and is compatible with crimp and fieldattachable style fittings. General performance characteristics of CNH bulk hose Special abrasion resistant covers Special designs to withstand suction forces Special designs for refrigeration service Low pressure designs Medium pressure designs High pressure designs General properties of each hose offering are displayed throughout the attached pages. Additional information is available by calling the Parker Hannifin Technical Information Line.

Parker Hannifin Parflex Division -

HFS HR1C D6 R6 HFS2 HR2C HTB

Firescreen®, Medium Pressure Farmex®, Medium Pressure 3000 psi Constant Pressure Abrasion King®, 3000 psi Constant Pressure With Abrasion Resistant Cover Firescreen II®, Medium Pressure Farmex II®, Medium Pressure Eliminator®, High Pressure

* For technical question on Parflex Division products call (330) 298-4066.

Parker Hannifin Hose Products Division** -

801 811HT B7 285 451ST 422 482TC BXX 431 301/302 471TC 471ST 472TC 351TC 351ST 721TC 772TC 781 782TC 701 791TC 792TC

Multipurpose, Low Pressure High Temperature Suction/Return, Low Pressure Non impulse; Low Pressure Refrigerant, Low Pressure 3000 psi Constant Pressure With “Super Tough” Cover Hydraulic, Medium Pressure Hydraulic With “Tough Cover”, Medium Pressure E-Z Flex, Medium Pressure Hydraulic, Compact, Medium Pressure Hydraulic World Wide, Medium Pressure Hydraulic With “Tough Cover”, Medium Pressure Hydraulic With “Super Tough” Cover, Medium Pressure Hydraulic With “Tough Cover”, Medium Pressure 4000 psi Constant Pressure with “Tough Cover” 4000 psi Constant Pressure with “Super Tough” Cover Hydraulic With “Tough Cover”, High Pressure Hydraulic With “Tough Cover”, High Pressure Hydraulic, High Pressure Hydraulic With “Tough Cover”, High Pressure Hydraulic, High Pressure Hydraulic With “Tough Cover”, High Pressure Hydraulic With “Tough Cover”, High Pressure

**For technical assistance from Hose Products Division call (440) 943-5700

CNH

Original Parts

ORIGINAL PARTS FLEXIBLE HOSES AND CRIMPED FITTINGS

PARTS & SERVICE

ORIGINAL PARTS FLEXIBLE HOSES AND CRIMPED FITTINGS

PARTS & SERVICE

SOLUTIONS Bulk Hose Reference Guide Results from the ISO 6945 metal-to-hose abrasion test show that Tough Cover and Super Tough Cover hoses offer significantly greater abrasion resistance than standard rubber cover hose. Braided vs. Spiral Hose Hydraulic hose can be categorized by construction style, of which there are two main types: braided and spiral. The majority of "low pressure hoses" designs have a textile braided construction. They're commonly used to transmit petroleumbased fluids, diesel fuel, hot lubricating oil, air, ethylene glycol anti-freeze, and water. "Medium pressure hose" designs typically feature one and two-wire braided construction. These hoses are frequently found on construction equipment, heavyduty trucks, and fleet vehicle applications. In general, braided hose is selected for its flexibility. A "high pressure" spiral reinforced design is able to pack more reinforcement into a hose than a braid design hose. Spiral hose is typically selected for its ability to withstand high working pressure and extremely high impulse pressure. Spiral hoses are commonly used in support of hydrostatic drives.

Parker Hose Nomenclature Example:

451TC-8 Hose Type 451TC-8 Indicates the special feature of the hose (in this case, ‘Tough Cover’) 451TC-8 Hose inside diameter dash size (in this case, 8/16" or 1/2")

How to properly combine approved combinations of Hose and Fittings: Parker Hannifin supports an on-line database of approved combinations of crimpers, hose, ends, and dies. Only hose and fitting combinations which are specifically approved by the hose manufacturer should be assembled. CrimpSource is your in-house expert for the crimping of all Parker Hannifin hose and ends. The below instructions will guide you through the web site. 1) Navigate your web browser to http://www.parker.com/crimpsource. 2) Use the drop-down menu, in the center of the page, to select the specific crimper being used (click on the down arrow in the center of the screen) 3) Click on “Crimp Spec” (See gold boxes on the left side of the page) 4) Use the drop-down menu to select the specific hose style to be crimped 5) Use the drop-down menu to select the specific fitting series being used 6) View results** **Note that in some cases, to view the Parker Hannifin die part number in CrimpSource, you must position the curser over the die reference (3rd column on CrimpSource output). Once the curser is in position, the Parker die part number will appear on your screen.

CNH

Original Parts

Parts CNH Original

Visual Index

Bulk Hose Reference Guide 801

PG-4 B7

PG-4

MultiPurpose

811HT

PG-5 285

PG-5

Specialty One Textile Braid Reinforcement

HFS

One Textile Braid Reinforcement

PG-6 HR1C

Two or Four Spiral Fabric Reinforcement

PG-6 D6

PG-7 R6

One Fiber Braid Reinforcement

PG-7 451TC

PG-8

Medium Pressure One Wire Braid Reinforcement

422

PG-8 482TC

One Wire Braid Reinforcement

One Wire Braid Reinforcement

PG-9 HFS2

One Wire Braid Reinforcement

301/302 PG-11

PG-9 HR2C

One Wire Braid Reinforcement

471TC

One or Two Wire Braid Reinforcement

PG-10 BXX

One Wire Braid Reinforcement

PG-12 471ST

One or Two Wire Braid Reinforcement

PG-10 431

Two Wire Braid Reinforcement

PG-13 472TC

One or Two Wire Braid Reinforcement

PG-11

Two Wire Braid Reinforcement

PG-13 351TC

PG-14

High Pressure Two Wire Braid Reinforcement

351ST

PG-14 HTB

Two Wire Braid Reinforcement

701

Two Wire Braid Reinforcement

Two Wire Braid Reinforcement

PG-18 791TC

Four Spiral Wire Reinforcement

PG-15 721TC

Four & Six Spiral Wire Reinforcement

PG-16 772TC

Four Spiral Wire Reinforcement

PG-19 792TC

Two Wire Braid Reinforcement

Two Wire Braid Reinforcement

PG-17 781

Four Spiral Wire Reinforcement

Two Wire Braid Reinforcement

PG-17 782TC

Four & Six Spiral Wire Reinforcement

PG-18

Four & Six Spiral Wire Reinforcement

PG-19

Four & Six Spiral Wire Reinforcement

3 PARTS AND SERVICE SOLUTIONS ORIGINAL PARTS FLEXIBLE HOSES AND CRIMPED FITTINGS

Parts CNH Original

GO TO INDEX

MULTIPURPOSE HOSE STYLE 801 Push On

Hose I.D.

CNH Part No.

Parker Part No.

P-801-4-BLK-RL P-801-6-BLK-RL P-801-8-BLK-RL P-801-10-BLK-RL P-801-12-BLK-RL P-801-16-BLK-RL

801-4-BLK-500’ 801-6-BLK-370’ 801-8-BLK-240’ 801-10-BLK-250’ 801-12-BLK-200’ 801-16-BLK-150’

Hose O.D.

Working Pressure

Minimum Bend Radius

inch

mm

inch

mm

psi

MPa

inch

mm

Fitting Series

1/4 3/8 1/2 5/8 3/4 1

6.3 10 12.5 16 19 25

.50 .63 .78 .91 1.03 1.28

12.7 15.9 19.8 23.0 26.2 32.6

250 250 250 250 250 175

1.7 1.7 1.7 1.7 1.7 1.2

2-1/2 3 5 6 7 10

65 75 125 150 180 250

82 82 82 82 82 82

STYLE B7 Push On

CNH Part No.

Parker Part No.

Hose I.D.

Hose O.D.

Working Pressure

Burst Pressure

Minimum Bend Radius

mm

inch

mm

psi

MPa

psi

MPa

inch

mm

Fitting Series

ZJM195 B704-50’ 1/4 6.3 P-B704-RL B704-650’ 1/4 6.3 ZJM196 B706-50’ 3/8 9.5 ZJM197 B708-50’ 1/2 12.7 ZJM198 B710-50’ 5/8 15.8 ZJM199 B712-50’ 3/4 19 * Recommended for adjustable crimpers only

.50 .50 .62 .75 .91 1.03

12.7 12.7 15.7 19 23 26.2

375 375 300 300 300 300

2.58 2.58 2.07 2.07 2.07 2.07

1500 1500 1200 1200 1200 1200

10.3 10.3 8.2 8.2 8.2 8.2

3.0 3.0 3.0 5.0 6.0 7

76.2 76.2 76.2 127 152 180

HY* HY* HY* HY* HY* HY*

inch

4 PARTS AND SERVICE SOLUTIONS ORIGINAL PARTS FLEXIBLE HOSES AND CRIMPED FITTINGS

Parts CNH Original

GO TO INDEX

SPECIALTY HOSE STYLE 811HT SAE 100R4 - SUCTION AND RETURN

Hose, Fittings, Crimper and Die compatibility must be confirmed through CrimpSource http://www.parker.com/dayco/csonline/crimpsource.asp

Hose I.D.

Hose O.D.

Working Pressure

Burst Pressure

Minimum Bend Radius

CNH Part No.

Parker Part No.

inch

mm

inch

mm

psi

MPa

psi

MPa

inch

mm

Fitting Series

P-811HT-12-BX P-811HT-16-BX P-811HT-20-BX P-811HT-24-BX

811HT-12-50’ 811HT-16-50’ 811HT-20-50’ 811HT-24-50’

3/4 1 1-1/4 1-1/2

19.0 25.4 31.8 38.1

1.18 1.50 1.77 2.05

30.0 38.0 45.0 52.0

100 70 50 50

0,7 0,5 0,3 0,3

400 280 200 200

8.3 7.0 5.5 4.1

2-1/2 3 4 5

64 76 102 127

88 88 88 88

STYLE 285 SAE J2064 Type C Class 1

Hose I.D.

Hose O.D.

Working Pressure

Burst Pressure

Minimum Bend Radius

CNH Part No.

Parker Part No.

inch

mm

inch

mm

psi

MPa

psi

MPa

inch

mm

Fitting Series

P-285-4-BX P-285-6-BX P-285-8-BX P-285-10-BX

285-4-100' 285-6-100' 285-8-100' 285-10-100'

3/16 5/16 13/32 1/2

5.1 8.1 10.7 13

.49 .62 .74 .83

11.7 15.7 18.8 21.1

500 500 500 500

3.4 3.4 3.4 3.4

2500 2500 2500 2500

13.8 13.8 13.8 13.8

1 1 1/2 2 2 1/2

25 38 51 64

26 26 26 26

5 PARTS AND SERVICE SOLUTIONS ORIGINAL PARTS FLEXIBLE HOSES AND CRIMPED FITTINGS

Parts CNH Original

GO TO INDEX

MEDIUM PRESSURE HOSE STYLE HFS - FIRE SCREEN® Exceeds SAE 100R1, Type AT

CNH Part No.

Parker Part No.

B91111 B91112 B91113

HFS04-250’ HFS06-250’ HFS08-250’

Hose I.D.

Hose O.D.

Working Pressure

Burst Pressure

Minimum Bend Radius

inch

mm

inch

mm

psi

MPa

psi

MPa

inch

mm

Fitting Series

1/4 3/8 1/2

6.3 9.5 12.7

0.50 0.66 0.77

12.7 16.7 19.5

3000 2500 2500

20.7 17.2 17.2

12000 10000 10000

82.7 68.9 68.9

2.0 2.5 3.5

50.8 63.5 88.9

HY, 43 HY, 43 HY, 43

STYLE HR1C - FARMEX® Exceeds SAE 100R1, Type AT

CNH Part No.

Parker Part No.

B90898 B90899 B90900

HR1C04-250’ HR1C06-250’ HR1C08-250’

Hose I.D.

Hose O.D.

Working Pressure

Burst Pressure

Minimum Bend Radius

inch

mm

inch

mm

psi

MPa

psi

MPa

inch

mm

Fitting Series

1/4 3/8 1/2

6.3 9.5 12.7

0.50 0.66 0.77

12.7 16.7 19.5

3000 2500 2500

20.7 17.2 17.2

12000 10000 10000

84.7 68.9 68.9

2.0 2.5 3.5

50.8 63.5 88.9

HY, 43 HY, 43 HY, 43

6 PARTS AND SERVICE SOLUTIONS ORIGINAL PARTS FLEXIBLE HOSES AND CRIMPED FITTINGS

Parts CNH Original

GO TO INDEX

MEDIUM PRESSURE HOSE - (CONTINUED) STYLE D6 - HYBRID HOSE Exceeds SAE 100R17

CNH Part No.

Parker Part No.

Hose I.D. inch

mm

Hose O.D. inch

mm

Working Pressure psi

B91577 D604-250’ 1/4 6.3 0.50 12.7 3000 B91578 D606-250’ 3/8 9.5 0.66 16.7 3000 B91579 D608-250’ 1/2 12.7 0.80 20 3000 B93613 D610-250’ 5/8 15.8 1.00 25.4 3000 B93614 D612-250’ 3/4 19 1.18 29.9 3000 B93615 D616-250’ 1 25 1.48 37.5 3000 * Recommended for Parkrimp crimpers only (non-adjustable crimpers)

Burst Pressure

Minimum Bend Radius

MPa

psi

MPa

inch

mm

Fitting Series

20.7 20.7 20.7 20.7 20.7 20.7

12000 12000 12000 12000 12000 12000

82.7 82.7 82.7 82.7 82.7 82.7

2.0 2.5 3.5 4.0 4.8 6.0

50.8 63.5 88.9 101.6 121.9 152.4

HY, 43* HY, 43* HY, 43* HY, 43* HY, 43* HY, 43*

STYLE R6 - ABRASION KING NO SKIVE Exceeds SAE 100R17

Hose, Fittings, Crimper and Die compatibility must be confirmed through CrimpSource http://www.parker.com/dayco/csonline/crimpsource.asp

CNH Part No.

Parker Part No.

Hose I.D. inch

mm

Hose O.D. inch

mm

Working Pressure psi

P-R6-4-RL R6-04-500’ 1/4 6 .51 13 3000 P-R6-6-RL R6-06-500’ 3/8 10 .69 17 3000 P-R6-8-RL R6-08-500’ 1/2 13 .82 21 3000 P-R6-10-RL R6-10-250’ 5/8 16 1.07 27 3000 P-R6-12-RL R6-12-250’ 3/4 19 1.23 31 3000 P-R6-16-RL R6-16-250’ 1 25 1.53 39 3000 * Recommended for Parkrimp crimpers only (non-adjustable crimpers)

Burst Pressure

Minimum Bend Radius

MPa

psi

MPa

inch

mm

Fitting Series

20.7 20.7 20.7 20.7 20.7 20.7

12000 12000 12000 12000 12000 12000

20.7 20.7 20.7 20.7 20.7 20.7

2.0 2.5 3.5 4.0 4.8 6.0

51 64 89 102 122 152

HY HY HY HY HY 43*

7 PARTS AND SERVICE SOLUTIONS ORIGINAL PARTS FLEXIBLE HOSES AND CRIMPED FITTINGS

Parts CNH Original

GO TO INDEX

MEDIUM PRESSURE HOSE - (CONTINUED) STYLE 451TC - BRAIDED

Hose I.D.

CNH Part No.

Parker Part No.

P-451TC-4-RL P-451TC-6-BX P-451TC-6-RL P-451TC-8-RL P-451TC-10-RL P-451TC-12-RL P-451TC-16-RL

451TC-4-450’ 451TC-6-50’ 451TC-6-350’ 451TC-8-400’ 451TC-10-265’ 451TC-12-230’ 451TC-16-125’

Hose O.D.

Working Pressure

Burst Pressure

Minimum Bend Radius

inch

mm

inch

mm

psi

MPa

psi

MPa

inch

mm

Fitting Series

1/4 3/8 3/8 1/2 5/8 3/4 1

6.3 10 10 12.5 16 19 25

0.52 0.68 0.68 0.80 0.94 1.10 1.40

13 17 17 20 24 28 35

3000 3000 3000 3000 3000 3000 3000

21.0 21.0 21.0 21.0 21.0 21.0 21.0

12000 12000 12000 12000 12000 12000 12000

84.0 84.0 84.0 84.0 84.0 84.0 84.0

2 2-1/2 2-1/2 3-1/2 4 4-3/4 6

50 65 65 90 100 120 150

43 43 43 43 43 43 43

STYLE 422 - NO SKIVE SAE 100R1, Type AT

CNH Part No.

Parker Part No.

P-422-4-BX P-422-4-RL P-422-6-BX P-422-6-RL P-422-8-BX P-422-8-RL P-422-10-BX P-422-10-RL P-422-12-BX P-422-12-RL P-422-16-BX P-422-16-RL

422-4-50’ 422-4-450’ 422-6-50’ 422-6-350’ 422-8-50’ 422-8-400’ 422-10-50’ 422-10-275’ 422-12-50’ 4222-12-230’ 422-16-50’ 422-16-125’

Hose I.D.

Hose O.D.

Working Pressure

Burst Pressure

Minimum Bend Radius

inch

mm

inch

mm

psi

MPa

psi

MPa

inch

mm

Fitting Series

1/4 1/4 3/8 3/8 1/2 1/2 5/8 5/8 3/4 3/4 1 1

6.3 6.3 10 10 12.5 12.5 16 16 19 19 25 25

0.53 0.53 0.68 0.68 0.81 0.81 0.94 0.94 1.09 1.09 1.41 1.41

13 13 17 17 21 21 24 24 28 28 36 36

3250 3250 2600 2600 2325 2325 1875 1875 1525 1525 1275 1275

25.0 25.0 18.0 18.0 16.0 16.0 13.0 13.0 10.5 10.5 8.8 8.8

13000 13000 10400 10400 9300 9300 7500 7500 6100 6100 5100 5100

90.0 90.0 72.0 72.0 64.0 64.0 52.0 52.0 42.0 42.0 35.0 35.0

4.0 4.0 5.0 5.0 7.0 7.0 8.0 8.0 9.5 9.5 12.0 12.0

100 100 130 130 180 180 200 200 240 240 300 300

43 43 43 43 43 43 43 43 43 43 43 43

8 PARTS AND SERVICE SOLUTIONS ORIGINAL PARTS FLEXIBLE HOSES AND CRIMPED FITTINGS

Parts CNH Original

GO TO INDEX

MEDIUM PRESSURE HOSE - (CONTINUED) STYLE 482TC - TOUGH COVER - BRAIDED No Skive

Hose I.D.

CNH Part No.

Parker Part No.

P-482TC-4-BX P-482TC-4-RL P-482TC-6-BX P-482TC-6-RL P-482TC-8-BX P-482TC-8-RL P-482TC-10-BX P-482TC-10-RL P-482TC-12-BX P-482TC-12-RL P-482TC-16-BX P-482TC-16-RL

482TC-4-50’ 482TC-4-450’ 482TC-6-50’ 482TC-6-350’ 482TC-8-50’ 482TC-8-400’ 482TC-10-50’ 482TC-10-275’ 482TC-12-50’ 482TC-12-230’ 482TC-16-50’ 482TC-16-125’

Hose O.D.

Working Pressure

Burst Pressure

Minimum Bend Radius

inch

mm

inch

mm

psi

MPa

psi

MPa

inch

mm

Fitting Series

1/4 1/4 3/8 3/8 1/2 1/2 5/8 5/8 3/4 3/4 1 1

6.3 6.3 10.0 10.0 12.5 12.5 16 16 19 19 25 25

0.525 0.525 0.690 0.690 0.820 0.820 0.94 0.94 1.090 1.090 1.410 1.410

13 13 17 17 21 21 24 24 28 28 36 36

3250 3250 3000 3000 2500 2500 2000 2000 1750 1750 1275 1275

22.7 22.7 21.0 21.0 17.5 17.5 14.0 14.0 12.2 12.2 8.8 8.8

13000 13000 12000 12000 10000 10000 8000 8000 7000 7000 5100 5100

90.8 90.8 84.0 84.0 70.0 70.0 56.0 56.0 48.8 48.8 35.0 35.0

2 2 2-1/2 2-1/2 3-1/2 3-1/2 4 4 4-3/4 4-3/4 6 6

50 50 65 65 90 90 100 100 120 120 150 150

43 43 43 43 43 43 43 43 43 43 43 43

STYLE HFS2 - FIRESCREEN II® SAE 100 R16

CNH Part No.

Parker Part No.

B91114 B91115 B91116 B93310 ZJM417 B93311 B91117 B93312 ZJM178

HFS204-250’ HFS206-250’ HFS208-250’ HFS210-55’ HFS210-250’ HFS212-55’ HFS212-250’ HFS216-55’ HFS216-250’

Hose I.D.

Hose O.D.

Working Pressure

Burst Pressure

Minimum Bend Radius

inch

mm

inch

mm

psi

MPa

psi

MPa

inch

mm

Fitting Series

1/4 3/8 1/2 5/8 5/8 3/4 3/4 1 1

6.3 9.5 12.7 15.8 15.8 19 19 25 25

0.56 0.66 0.80 0.95 0.95 1.08 1.08 1.43 1.43

14.2 16.7 20 24.1 24.1 27.4 27.4 36.3 36.3

5000 4000 3500 2750 2750 2250 2250 2000 2000

34.5 27.6 24.1 19.0 19.0 15.5 15.5 13.8 13.8

20000 16000 14000 11000 11000 9000 9000 8000 8000

137.8 110.3 96.5 75.8 75.8 62.0 62.0 55.2 55.2

2.0 2.5 3.5 4.0 4.0 4.8 4.8 6.0 6.0

50.8 63.5 88.9 101.6 101.6 121.9 121.9 152.4 152.4

HY, 43 HY, 43 HY, 43 HY, 43 HY, 43 HY, 43 HY, 43 HY, 43 HY, 43

9 PARTS AND SERVICE SOLUTIONS ORIGINAL PARTS FLEXIBLE HOSES AND CRIMPED FITTINGS

Parts CNH Original

GO TO INDEX

MEDIUM PRESSURE HOSE - (CONTINUED) STYLE HR2C - FARMEX II® SAE 100R2, Type AT

CNH Part No.

Parker Part No.

B90976 B94031 B90977 B90978 B93313 ZJM179 B93314 B90979 B93315 ZJM180

HR2C04-250’ HR2C04-50’ HR2C06-250’ HR2C08-250’ HR2C10-50’ HR2C10-250’ HR2C12-50’ HR2C12-250’ HR2C16-50’ HR2C16-250’

Hose I.D.

Hose O.D.

Working Pressure

Burst Pressure

Minimum Bend Radius

inch

mm

inch

mm

psi

MPa

psi

MPa

inch

mm

Fitting Series

1/4 1/4 3/8 1/2 5/8 5/8 3/4 3/4 1 1

6.3 6.3 9.5 12.7 15.8 15.8 19 19 25 25

0.56 0.56 0.66 0.80 0.95 0.95 1.08 1.08 1.43 1.43

14.2 14.2 16.7 20.3 24.1 24.1 27.4 27.4 36.3 36.3

5000 5000 4000 3500 2750 2750 2250 2250 2000 2000

34.5 34.5 27.6 24.1 19.0 19.0 15.5 15.5 13.8 13.8

20000 20000 16000 14000 11000 11000 9000 9000 8000 8000

137.8 137.8 110.3 96.5 75.8 74.8 62.0 62.0 55.2 55.2

2.0 2.0 2.5 3.5 4.0 4.0 4.8 4.8 6.0 6.0

50.8 50.8 63.4 88.9 101.6 101.6 121.9 121.9 152.4 152.4

HY, 43 HY, 43 HY, 43 HY, 43 HY, 43 HY, 43 HY, 43 HY, 43 HY, 43 HY, 43

STYLE BXX E-Z FLEX® SAE 100R2, Type AT

CNH Part No.

Parker Part No.

B94994 B94995 B94996 B94997 B94998 B94999 B95000 B95001

BXX04-350’ BXX06-350’ BXX08-250’ BXX10-250’ BXX12-50’ BXX12-200’ BXX16-50’ BXX16-250’

Hose I.D.

Hose O.D.

Working Pressure

Burst Pressure

Minimum Bend Radius

inch

mm

inch

mm

psi

MPa

psi

MPa

inch

mm

Fitting Series

1/4 3/8 1/2 5/8 3/4 3/4 1 1

6.3 9.5 12.7 15.8 19 19 25 25

0.59 0.74 0.87 1.00 1.15 1.15 1.49 1.49

14.9 18.8 22.1 25.4 29.2 29.2 37.8 37.8

5000 4000 3500 2750 2250 2250 2000 2000

34.5 27.6 24.1 19.0 15.5 15.5 13.8 13.8

20000 16000 14000 11000 9000 9000 8000 8000

137.8 110.3 96.5 75.8 62.0 62.0 55.2 55.2

4 5 7 8 9.5 9.5 12 12

101.6 127 177.8 203.2 241.3 241.3 304.8 304.8

HY HY HY HY HY HY HY HY

10 PARTS AND SERVICE SOLUTIONS ORIGINAL PARTS FLEXIBLE HOSES AND CRIMPED FITTINGS

Parts CNH Original

GO TO INDEX

MEDIUM PRESSURE HOSE - (CONTINUED) STYLE 431 - NO SKIVE SAE 100R16, Type R16

CNH Part No.

Parker Part No.

P-431-4-RL P-431-6-RL P-431-8-RL P-431-10-RL P-431-12-RL P-431-16-RL

431-4-450’ 431-6-350’ 431-8-400’ 431-10-275’ 431-12-230’ 431-16-125’

Hose I.D.

Hose O.D.

Working Pressure

Burst Pressure

Minimum Bend Radius

inch

mm

inch

mm

psi

MPa

psi

MPa

inch

mm

Fitting Series

1/4 3/8 1/2 5/8 3/4 1

6.3 10 12.5 16 19 25

0.53 0.68 0.81 0.94 1.09 1.41

13 17 21 24 28 36

5000 4000 3500 2750 2250 2000

34.5 27.5 24 19 15.5 13.8

20000 16000 14000 11000 9000 8000

138 110 96 76 62 55

2.0 2.5 3.5 4.0 4.75 6.0

50 65 90 100 120 150

43 43 43 43 43 43

STYLE 301/302 - NO SKIVE SAE 100R2, Type AT

CNH Part No.

Parker Part No.

P-301-4-BX P-301-4-RL P-301-6-BX P-301-6-RL P-301-8-BX P-301-8-RL P-301-10-BX P-301-10-RL P-301-12-BX P-301-12-RL P-301-16-BX P-301-16-RL

301-4-50’ 301-4-450’ 301-6-50’ 301-6-350’ 301-8-50’ 301-8-400’ 301-10-50’ 301-10-275’ 301-12-50’ 301-12-230’ 301-16-50’ 301-16-125’

Hose I.D.

Hose O.D.

Working Pressure

Burst Pressure

Minimum Bend Radius

inch

mm

inch

mm

psi

MPa

psi

MPa

inch

mm

Fitting Series

1/4 1/4 3/8 3/8 1/2 1/2 5/8 5/8 3/4 3/4 1 1

6.3 6.3 10 10 12.5 12.5 16 16 19 19 25 25

0.59 0.59 0.75 0.75 0.88 0.88 1.00 1.00 1.16 1.16 1.50 1.50

15 15 19 19 22 22 25 25 29 29 38 38

5000 5000 4000 4000 3500 3500 2750 2750 2250 2250 2000 2000

34.5 34.5 27.5 27.5 24 24 19 19 15.5 15.5 13.8 13.8

20000 20000 16000 16000 14000 14000 11000 11000 9000 9000 8000 8000

138 138 110 110 96 96 76 76 62 62 55 55

4.0 4.0 5.0 5.0 7.0 7.0 8.0 8.0 9.5 9.5 12.0 12.0

100 100 130 130 180 180 200 200 240 240 300 300

43 43 43 43 43 43 43 43 43 43 43 43

11 PARTS AND SERVICE SOLUTIONS ORIGINAL PARTS FLEXIBLE HOSES AND CRIMPED FITTINGS

Parts CNH Original

GO TO INDEX

HIGH PRESSURE HOSE STYLE 471TC - TOUGH COVER - BRAIDED No Skive

CNH Part No.

Parker Part No.

P-471TC-4-BX P-471TC-4-RL P-471TC-6-BX P-471TC-6-RL P-471TC-8-BX P-471TC-8-RL P-471TC-10-BX P-471TC-10-RL P-471TC-12-BX P-471TC-12-RL P-471TC-16-BX P-471TC-16-RL

471TC-4-50’ 471TC-4-450’ 471TC-6-50’ 471TC-6-350’ 471TC-8-50’ 471TC-8-400’ 471TC-10-50’ 471TC-10-275’ 471TC-12-50’ 471TC-12-230’ 471TC-16-50’ 471TC-16-125’

Hose I.D.

Hose O.D.

Working Pressure

Burst Pressure

Minimum Bend Radius

inch

mm

inch

mm

psi

MPa

psi

MPa

inch

mm

Fitting Series

1/4 1/4 3/8 3/8 1/2 1/2 5/8 5/8 3/4 3/4 1 1

6.3 6.3 10 10 12.5 12.5 16 16 19 19 25 25

.510 .510 0.68 0.68 .800 .800 0.94 0.94 1.090 1.090 1.40 1.40

13 13 17 17 20 20 24 24 28 28 35 35

5800 5800 5000 5000 4250 4250 3625 3625 3125 3125 2500 2500

40 40 35.0 35.0 29.7 29.7 25.0 25.0 21.5 21.5 17.5 17.5

23200 23200 20000 20000 17000 17000 14500 14500 12500 12500 10000 10000

160 160 140.0 140.0 119 119 100.0 100.0 86.0 86.0 70.0 70.0

2 2 2-1/2 2-1/2 3-1/2 3-1/2 4 4 4-3/4 4-3/4 6 6

50 50 65 65 90 90 100 100 120 120 150 150

43 43 43 43 43 43 43 43 43 43 43 43

12 PARTS AND SERVICE SOLUTIONS ORIGINAL PARTS FLEXIBLE HOSES AND CRIMPED FITTINGS

Parts CNH Original

GO TO INDEX

HIGH PRESSURE HOSE - (CONTINUED) STYLE 471ST - SUPER TOUGH COVER - BRAIDED No Skive

Hose, Fittings, Crimper and Die compatibility must be confirmed through CrimpSource http://www.parker.com/dayco/csonline/crimpsource.asp

CNH Part No.

Parker Part No.

P-471ST-4-BX P-471ST-4-RL P-471ST-6-BX P-471ST-6-RL P-471ST-8-BX P-471ST-8-RL P-471ST-10-BX P-471ST-10-RL P-471ST-12-BX P-471ST-12-RL P-471ST-16-BX P-471ST-16-RL

471ST-4-50’ 471ST-4-450’ 471ST-6-50’ 471ST-6-350’ 471ST-8-50’ 471ST-8-400’ 471ST-10-50’ 471ST-10-275’ 471ST-12-50’ 471ST-12-230’ 471ST-16-50’ 471ST-16-125’

Hose I.D.

Hose O.D.

Working Pressure

Burst Pressure

Minimum Bend Radius

inch

mm

inch

mm

psi

MPa

psi

MPa

inch

mm

Fitting Series

1/4 1/4 3/8 3/8 1/2 1/2 5/8 5/8 3/4 3/4 1 1

6.3 6.3 10.0 10.0 12.5 12.5 16 16 19 19 25 25

0.510 0.510 0.67 0.67 0.80 0.80 0.94 0.94 1.10 1.10 1.38 1.38

13 13 17 17 20 20 24 24 28 28 35 35

5800 5800 5000 5000 4250 4250 3625 3625 3125 3125 2500 2500

40.0 40.0 35.0 35.0 29.7 29.7 25.0 25.0 21.5 21.5 17.5 17.5

23200 23200 20000 20000 17000 17000 14500 14500 12500 12500 10000 10000

160.0 160.0 140.0 140.0 119.0 119.0 100.0 100.0 86.0 86.0 70.0 70.0

2 2 2-1/2 2-1/2 3-1/2 3-1/2 4 4 4-3/4 4-3/4 6 6

50 50 65 65 90 90 100 100 120 120 150 150

43 43 43 43 43 43 43 43 43 43 43 43

STYLE 472TC - TOUGH COVER - BRAIDED No Skive

Hose I.D.

Hose O.D.

Working Pressure

Burst Pressure

Minimum Bend Radius

CNH Part No.

Parker Part No.

inch

mm

inch

mm

psi

MPa

psi

MPa

inch

mm

Fitting Series

P-472TC-20 P-472TC-24

472TC-20-50’ 472TC-24-50’

1-1/4 1-1/2

31.5 38

1.79 2.01

45 51

2250 1800

15.7 12.5

9000 7200

63 50

8-1/4 10

210 250

43 43

13 PARTS AND SERVICE SOLUTIONS ORIGINAL PARTS FLEXIBLE HOSES AND CRIMPED FITTINGS

Parts CNH Original

GO TO INDEX

HIGH PRESSURE HOSE - (CONTINUED) STYLE 351TC - SUPER TOUGH COVER No Skive

CNH Part No.

Parker Part No.

P-351TC-BX P-351TC-4-RL P-351TC-6-BX P-351TC-6-RL P-351TC-8-BX P-351TC-8-RL P-351TC-10-BX P-351TC-10-RL P-351TC-12-BX P-351TC-12-RL

351TC-4-50’ 351TC-4-450’ 351TC-6-50’ 351TC-6-350’ 351TC-8-50’ 351TC-8-400’ 351TC-10-50’ 351TC-10-275’ 351TC-12-50’ 351TC-12-230’

Hose I.D.

Hose O.D.

Working Pressure

Minimum Bend Radius

inch

mm

inch

mm

psi

MPa

inch

mm

Fitting Series

1/4 1/4 3/8 3/8 1/2 1/2 5/8 5/8 3/4 3/4

6.3 6.3 10 10 12.5 12.5 16 16 19 19

0.51 0.51 0.67 0.67 0.80 0.80 0.93 0.93 1.09 1.09

13 13 17 17 20 20 24 24 28 28

4000 4000 4000 4000 4000 4000 4000 4000 4000 4000

28 28 28 28 28 28 28 28 28 28

2 2 2-1/2 2-1/2 3-1/2 3-1/2 4 4 4-3/4 4-3/4

50 50 65 65 90 90 100 100 120 120

43 43 43 43 43 43 43 43 43 43

STYLE 351ST - SUPER TOUGH COVER No Skive

CNH Part No.

Parker Part No.

P-351ST-4-BX P-351ST-4-RL P-351ST-6-BX P-351ST-6-RL P-351ST-8-BX P-351ST-8-RL P-351ST-10-BX P-351ST-10-RL P-351ST-12-BX P-351ST-12-RL

351ST-4-50’ 351ST-4-450’ 351ST-6-50’ 351ST-6-350’ 351ST-8-50’ 351ST-8-400’ 351ST-10-50’ 351ST-10-275’ 351ST-12-50’ 351ST-12-230’

Hose I.D.

Hose O.D.

Working Pressure

Minimum Bend Radius

inch

mm

inch

mm

psi

MPa

inch

mm

Fitting Series

1/4 1/4 3/8 3/8 1/2 1/2 5/8 5/8 3/4 3/4

6.3 6.3 10 10 12.5 12.5 16 16 19 19

0.51 0.51 0.67 0.67 0.80 0.80 0.93 0.93 1.09 1.09

13 13 17 17 20 20 24 24 28 28

4000 4000 4000 4000 4000 4000 4000 4000 4000 4000

28 28 28 28 28 28 28 28 28 28

2 2 2-1/2 2-1/2 3-1/2 3-1/2 4 4 4-3/4 4-3/4

50 50 65 65 90 90 100 100 120 120

43 43 43 43 43 43 43 43 43 43

14 PARTS AND SERVICE SOLUTIONS ORIGINAL PARTS FLEXIBLE HOSES AND CRIMPED FITTINGS

Parts CNH Original

GO TO INDEX

HIGH PRESSURE HOSE - (CONTINUED) STYLE HTB - ELIMINATOR®

CNH Part No.

Parker Part No.

Hose I.D. inch

mm

Hose O.D. inch

mm

Working Pressure psi

ZJM181 HTB04-250’ 1/4 6.3 0.60 15.2 7000 ZJM182 HTB06-250’ 3/8 9.5 0.74 18.8 5500 ZJM183 HTB08-250’ 1/2 12.7 0.87 22.1 5000 B93316 HTB10-50’ 5/8 15.8 1.00 25.4 4000 ZJM434 HTB10-250’ 5/8 15.8 1.00 25.4 4000 B93317 HTB12-50’ 3/4 19 1.15 29.2 4000 ZJM184 HTB12-250’ 3/4 19 1.15 29.2 4000 B93318 HTB16-50’ 1 25 1.49 37.8 3500 ZJM185 HTB16-250’ 1 25 1.49 37.8 3500 * Recommended for Parkrimp crimpers only (non-adjustable crimpers)

Burst Pressure

Minimum Bend Radius

MPa

psi

MPa

inch

mm

Fitting Series

48.2 37.9 34.5 27.6 27.6 27.6 27.6 24.1 24.1

28000 22000 20000 16000 16000 16000 16000 14000 14000

193.0 151.6 137.8 110 110 110.3 110.3 96.5 96.5

4.0 6.0 7.0 8.0 8.0 9.5 9.5 12.0 12.0

101.6 152.4 177.8 203.2 203.2 241.3 241.3 304.8 304.8

HY* HY*, 43 HY*, 43 HY*, 43** HY*, 43** HY*, 43 HY*, 43 HY*, 43 HY*, 43

** Recommended for adjustable crimpers only. Hose must be skived when using HY couplings.

15 PARTS AND SERVICE SOLUTIONS ORIGINAL PARTS FLEXIBLE HOSES AND CRIMPED FITTINGS

Parts CNH Original

GO TO INDEX

HIGH PRESSURE HOSE - (CONTINUED) STYLE 721TC - NO SKIVE - BRAIDED SAE 100R12

Hose I.D.

Hose O.D.

Working Pressure

Burst Pressure

Minimum Bend Radius

CNH Part No.

Parker Part No.

inch

mm

inch

mm

psi

MPa

psi

MPa

inch

mm

Fitting Series

P-721TC-6-BX P-721TC-6-RL P-721TC-8-BX P-721TC-8-RL P-721TC-10-BX P-721TC-10-RL P-721TC-12-BX P-721TC-12-RL P-721TC-16-BX P-721TC-16-RL P-721TC-20-BX P-721TC-20-RL P-721TC-24-BX P-721TC-24-RL P-721TC-32-BX P-721TC-32-RL

721TC-6-50’ 721TC-6-125’ 721TC-8-50’ 721TC-8-125’ 721TC-10-50’ 721TC-10-125’ 721TC-12-50’ 721TC-12-125’ 721TC-16-50’ 721TC-16-125’ 721TC-20-50’ 721TC-20-125’ 721TC-24-50’ 721TC-24-100’ 721TC-32-50’ 721TC-32-100’

3/8 3/8 1/2 1/2 5/8 5/8 3/4 3/4 1 1 1-1/4 1-1/4 1-1/2 1-1/2 2 2

10 10 12.5 12.5 16 16 19 19 25 25 31.5 31.5 38 38 51 51

0.8 0.8 0.94 0.94 1.08 1.08 1.21 1.21 1.5 1.5 1.84 1.84 2.07 2.07 2.59 2.59

20 20 24 24 27 27 31 31 38 38 46 46 53 53 66 66

4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 3000 3000 2500 2500 2500 2500

28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 21.0 21.0 17.5 17.5 17.5 17.5

16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 12000 12000 10000 10000 10000 10000

112.0 112.0 112.0 112.0 112.0 112.0 112.0 112.0 112.0 112.0 84.0 84.0 70.0 70.0 70.0 70.0

2.5 2.5 3.5 3.5 4 4 4.75 4.75 6 6 8.25 8.25 10 10 12.5 12.5

62.5 62.5 90 90 100 100 120 120 150 150 210 210 250 250 320 320

71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71

16 PARTS AND SERVICE SOLUTIONS ORIGINAL PARTS FLEXIBLE HOSES AND CRIMPED FITTINGS

Parts CNH Original

GO TO INDEX

HIGH PRESSURE HOSE - (CONTINUED) STYLE 772TC Tough Cover

Hose I.D.

Hose O.D.

Working Pressure

Minimum Bend Radius

CNH Part No.

Parker Part No.

inch

mm

inch

mm

psi

MPa

inch

mm

Fitting Series

P-772TC-10-RL P-772TC-12-RL P-772TC-16-RL P-772TC-20-RL P-772TC-24-RL

772TC-10-125’ 772TC-12-125’ 772TC-16-55’ 772TC-20-55’ 772TC-24-55’

5/8 3/4 1 1-1/4 1-1/2

16 19 25 31.5 38

1.08 1.21 1.50 1.84 2.07

27 31 38 46 53

4000 4000 4000 3000 2500

28.0 28.0 28.0 21.0 17.5

8 9-1/2 12 16-1/2 20

200 240 300 420 500

71 71 71 71 71

STYLE 781 - NO SKIVE SAE 100R13

Hose I.D.

Hose O.D.

Working Pressure

Burst Pressure

Minimum Bend Radius

CNH Part No.

Parker Part No.

inch

mm

inch

mm

psi

MPa

psi

MPa

inch

mm

Fitting Series

P-781-12-BX P-781-12-RL P-781-16-BX P-781-16-RL P-781-20-BX P-781-20-RL P-781-24-BX P-781-24-RL

781-12-50’ 781-12-125’ 781-16-50’ 781-16-125’ 781-20-50’ 781-20-125’ 781-24-50’ 781-24-100’

3/4 3/4 1 1 1-1/4 1-1/4 1-1/2 1-1/2

19 19 25 25 31.5 31.5 38 38

1.26 1.26 1.52 1.52 1.96 1.96 2.26 2.26

32 32 39 39 50 50 57 57

5000 5000 5000 5000 5000 5000 5000 5000

35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0

20000 20000 20000 20000 20000 20000 20000 20000

140.0 140.0 140.0 140.0 140.0 140.0 140.0 140.0

9-1/2 9-1/2 12 12 16-1/2 16-1/2 20 20

240 240 300 300 420 420 500 500

78 78 78 78 78 78 78 78

17 PARTS AND SERVICE SOLUTIONS ORIGINAL PARTS FLEXIBLE HOSES AND CRIMPED FITTINGS

Parts CNH Original

GO TO INDEX

HIGH PRESSURE HOSE - (CONTINUED) STYLE 782TC Hydraulic - Tough Cover

Hose I.D.

Hose O.D.

Working Pressure

Minimum Bend Radius

CNH Part No.

Parker Part No.

inch

mm

inch

mm

psi

MPa

inch

mm

Fitting Series

P-782TC-12-RL P-782TC-16-RL P-782TC-20-RL P-782TC-24-RL

782TC-12-125’ 782TC-16-55’ 782TC-20-55’ 782TC-24-55’

3/4 1 1-1/4 1-1/2

19 25 31.5 38

1.26 1.52 1.96 2.26

32 39 50 57

5000 5000 5000 5000

35.0 35.0 35.0 35.0

9-1/2 12 16-1/2 20

240 300 420 500

78 78 78 78

STYLE 701 - NO SKIVE SAE 100R13

CNH Part No.

Parker Part No.

P-701-6-RL P-701-8-RL P-701-10-RL

701-6-125’ 701-8-125’ 701-10-125’

Hose I.D.

Hose O.D.

Working Pressure

Minimum Bend Radius

inch

mm

inch

mm

psi

MPa

inch

mm

Fitting Series

3/8 1/2 5/8

10 12.5 16

0.84 0.97 1.11

21 25 28

6500 6000 5000

45.0 41.5 35.0

7 9 10

180 230 250

70 70 70

18 PARTS AND SERVICE SOLUTIONS ORIGINAL PARTS FLEXIBLE HOSES AND CRIMPED FITTINGS

Parts CNH Original

GO TO INDEX

HIGH PRESSURE HOSE - (CONTINUED) STYLE 791TC Hydraulic - Extreme Tough Cover

Hose I.D.

Hose O.D.

Working Pressure

Minimum Bend Radius

CNH Part No.

Parker Part No.

inch

mm

inch

mm

psi

MPa

inch

mm

Fitting Series

P-791TC-12 P-791TC-16 P-791TC-20 P-791TC-24

791TC-12-125 791TC-16-125 791TC-20-125 791TC-24-50

3/4 1 1-1/4 1-1/2

19 25 31.5 38

1.26 1.52 1.97 223

32 39 50 56.5

6000 6000 6000 6000

42.0 42.0 42.0 42.0

8 10 10 12

200 250 250 305

79 79 79 79

STYLE 792TC Hydraulic - Tough Cover

Hose I.D.

CNH Part No.

Parker Part No.

P-792TC-12 P-792TC-16

792TC-12-50 792TC-16-50

Hose O.D.

Working Pressure

Minimum Bend Radius

inch

mm

inch

mm

psi

MPa

inch

mm

Fitting Series

3/4 1

19 25

1.26 1.52

32 39

6000 6000

42.0 42.0

10-1/2 13

265 330

79 79

19 PM-13813

PARTS AND SERVICE SOLUTIONS ORIGINAL PARTS FLEXIBLE HOSES AND CRIMPED FITTINGS