SOLAR

CABLE, CONNECTOR, & ACCESSORIES

CABLE High temperature resistant up to 120ºC, the cable is built with double insulation. Its halogen-free outer sheath is flame resistant and protect against aging and UV.

Standards:

• TUV certification 2pfG 1169/08.07 • Comply with UTE C15-712 and UTE C32-502 guide • Life Span: 25 years

Construction:

• Inner conductor: Tinned copper class 5 according to IEC60228 • Insulator: XL-HFFR White or Black • Outer sheath: XL-HFFR, thermoplastic, halogen free.

Electrical characteristics • • • • •

Operating voltage: 09/1.8Kv DC – 06/1Kv AC Operating temperature: 40ºC to 90ºC Max Temperature: 120ºC Fire, UV and ozone resistant Minimum radius: 5x ext. Diameter

DESCRIPTION

REFERENCES

DIAMETER

Black* 1x2.5mm2

SOL2.5BK

5.2 mm

Black* 1x4mm2

SOL4BK

6 mm

Black* 1x6mm2

SOL6BK

6.6 mm

Black* 1x10mm2

SOL10BK

8.2 mm

Black* 1x16mm2

SOL16BK

9.7 mm

Black* 1x25mm2

SOL25BK

10.9 mm

*: Red and Blue available upon request

CONNECTORS AND ACCESSORIES Cable connectors allow to realize a reliable interface between the panels and the inverter. IP67, connectors meet all the requirement related to safety (class II) and the market standards. Cable section: 4, 6, 10 mm2

Advantages: • Secured connectors for user’s safety • Excellent electrical conductivity

Electrical characteristics: • • • •

Tension: 1Kv DC Resistance >

> > > >

UL1581, horizontal tray UL1685, vertical tray

PVC basic (up to 105°C) PVC flame retardant (up to 105°C) PE (up to 80°C) PP (up to 80°C)

> LSZH (up to 90°C) > XLPE (up to 150°C) > FEP (up to 200°C)

Hook-Up wire: This category has very simple construction and a lot of different application, Such as household appliance, illumination and lighting; Motor, cars and ships electrical installation; or internal appliances wiring or electrical equipment. UL type 1007(TR-64) 1015(TEW) 1028 1061 1283 1330 1332 3173 3266 3271 3321 10138 10152

Insulation Insulation Conductor

PVC Insulation Conductor

XLPE

Insulation Conductor

PE PP

Control cables Those cables have different construction (from 1 to12 pairs) and can be used for different application, such as General electrical equipment, internal wiring audio, control and instrumentation. UL style 2092 2095 2464 2493 2598 2919

Insulation PE PP/PVC PVC Foam PE PVC PP/PE/Foam PE

Jacket

PVC

Jacket Al Pet Insulation Conductor Drain wire

Jacket Insulation Conductor

Jacket Al Pet Insulation Conductor Drain wire

Packing and MOQ > > >

305m, 500m and 1000m Drum 10km/ item 1x20ft container

25, Wuxing Lu, B2 Room 702 Zip 200031 Shanghai Email : [email protected] www.symea-group.com

Taps,Splitters and Couplers Range Splitters :Divide signal from 1 input to XXoutputs* Electrical   Data

Mechanical Data

Insertion loss (dB):

5 to 1000MHZ: 4.0 1 input, 2 outputs: 1000 to 1700MHz: 4.5 1700 to 2400MHz: 5.5

5 to 1000MHZ: 8.0 1 input, 4 outputs: 1000 to 1700MHz: 9.0 1700 to 2400MHz: 10.5

5 to 1000MHZ: 6.0 1 input, 3 outputs: 1000 to 1700MHz: 7.0 1700 to 2400MHz: 8.5

5 to 1000MHZ: 11.5 1 input, 6 outputs: 1000 to 1700MHz: 12.5 1700 to 2400MHz: 15.5

W

Sticker

Screening efficency:

5 to 470 MHz >75dB 470 to 1000 MHz >65dB 1000 to 2300 MHz >60dB

H Cable pass L

*From 1 output to 6 outputs

TSpXX range High end range of splitter Cable pass under splitter from 7 to 9 mm height Terrestrial and satellite splitter with power pass from input to output Screw type female F-connector Item

 

Dimension LxWxH/Cable pass (mm)

TSp02: 1 input, 2 outputs

52x60x26 / 9

TSp03: 1 input, 3 outputs

52x60x26 / 9

TSp04: 1 input, 3 outputs

75x60x26 / 9

TSp06: 1 input, 6 outputs

120x60x26 /  7

SpX range Cost efficient housing Cable pass under splitter from 7 to 9 mm height Terrestrial and satellite splitter with power pass from input to output Screw type female F-connector Item

Dimension LxWxH/Cable pass (mm)

Sp2 - 1 input, 2 outputs

40x54x25 / 9

Sp3 - 1 input, 3 outputs

40x54x25 / 9

Sp4 - 1 input, 4 outputs

40x54x25 / 9

Sp6 - 1 input, 6 outputs

105x58x25 / 7

Taps,Splitters and Couplers Range Taps :

Divert a predetermined amount of its input signal energy to XXXoutputs*, with the remaining balance of the output energy going through outlet.

Mechanical Data Dimension LxWxH (mm)

2 outputs: 60x54x26 4 outputs: 60x76x26

W

Sticker

6 outputs: 65x122x26 8 outputs: 65x122x26 *From 1 output to 8 outputs

TAPXX-XX range Insertion loss from 1 to 4 dB depending on frequency Typical insulation 25dB between outputs Power pass from input to output Screw type female F-connector With or without Cable pass under taps ( 9mm height)

H Cable pass L

Electrical Data Item 2 outputs TAP 02-10 TAP 02-12 TAP 02-16 TAP 02-20

Taps loss From 5 to 950HMz: 10 dB From 950 to 2400MHz : 11dB From 5 to 950HMz: 12 dB From 950 to 2400MHz : 13dB From 5 to 950HMz: 16 dB From 950 to 2400MHz : 17dB From 5 to 950HMz: 20 dB From 950 to 2400MHz : 21dB

4 outputs TAP 04-10 TAP 04-12 TAP 04-16 TAP 04-20

From 5 to 950HMz: 10 dB From 950 to 2400MHz : 11dB From 5 to 950HMz: 12 dB From 950 to 2400MHz : 13dB From 5 to 950HMz: 16 dB From 950 to 2400MHz : 17dB From 5 to 950HMz: 20 dB From 950 to 2400MHz : 21dB

6 outputs TAP 06-16 TAP 06-20

From 5 to 950HMz: 16 dB From 950 to 2400MHz : 17dB From 5 to 950HMz: 20 dB From 950 to 2400MHz : 21dB

8 outputs TAP 08-16 TAP 08-20

From 5 to 950HMz: 16 dB From 950 to 2400MHz : 17dB From 5 to 950HMz: 20 dB From 950 to 2400MHz : 21dB

Taps,Splitters and Couplers Range Couplers :

Coupling/decoupling satellite and terrestrial signal

Mechanical Data Dimension LxWxH (mm) 58x22x17 W

Sticker

CP-XX-ST range High screening efficency Screw type female F-connector

H

Return loss > 10dB

L

Electrical Data Item CP-02-ST

Insertion loss Terrestrial: 47 to 862MHz=1.5dB Satellite: 950 to 2400=1.5dB

CLASSE

A

RG6 Satellite Cable Class A and Class A+

EN 50117

CLASSE

A+

EN 50117

CATV networks are used to transfer high frequency signals from source to household installation, they also use return path band with low frequency signal under 30MHz (e.g.: Internet connection or Pay TV). In order to indicate the outer conductor ability to prevent the inner signal and outside disturbance to interfere with each other, it requires 2 key features: Screening efficiency and Transfer Impedance. According to EN50117, coaxial cables are categorized in different classes, based on shielding efficiency.

RG6 Class A This cable has a Copper Clad Steel inner conductor and is tri-shielded. The shield is build with an Aluminum foil bonded to the foam PE insulation, an Aluminum Braiding and a second Aluminum Foil (thicker than the first). Inner conductor Foil1 Shield Braiding Foil 2 Outer jacket Screening 30～1000MHz Efficiency Transfer Impedance 5～30MHz

1.02 mm 55% coverage 6.80 mm 105 dB