SOFT CLOSE HINGES Kitchens
Doors
Kitchen Accessories
Hinges
Drawer Slides
110° Soft Close Snap-On Hinge
Plywood Melamine
Veneer
Edgebanding
Laminate
90° Soft Close
45° Soft Close
Solid Surface
Closets
Furniture Hardware
155° Soft Close
Full Overlay Soft Close
Pulls & Knobs Lighting
Grommets Locks, Lock Systems
Inset Soft Close
Half Overlay Soft Close
Molding, Carvings
Tools Adhesives Solvents Abrasives Chemicals Staples Screws
TIOMOS HINGE SYSTEM
Stylish design. Maximum stability.
79
SOFT CLOSE HINGES
Economy Soft Close Kitchens
110° Soft Close Snap-On Hinge Doors
Kitchen Accessories
Hinges
• • • • •
Snap-On Hinge Soft Close Cylinder Inside Hinge Arm 35mm Cup 45mm Drilling Pattern All Steel Construction
E
L B TA S JU ARM D A E G M N A I C H
• Satisfaction Guaranteed Drawer Slides Plywood Melamine
Veneer
Edgebanding
Laminate
Solid Surface
Closets
Furniture Hardware
Item Number Description
Pulls & Knobs
14-400
110° Soft Close Snap-on Hinge without Dowels
14-402
110° Soft Close Snap-on Hinge with Dowels
Lighting
Grommets Locks, Lock Systems Molding, Carvings
SOFT CLOSE FULL OVERLAY
HINGE 14-400 Tools Adhesives Solvents Abrasives Chemicals Staples Screws
Adjustable 2 PIECE PLATE
FACE FRAME PLATE
1 PIECE PLATE
0mm PLATE WITHOUT SCREWS 14-216
1mm PLATE WITHOUT SCREWS 14-224
0mm PLATE WITHOUT SCREWS 14-228
2mm PLATE WITHOUT SCREWS 14-218
3mm PLATE WITHOUT SCREWS 14-226
2mm PLATE WITHOUT SCREWS 14-230
0mm PLATE WITH EURO SCREWS 14-220 2mm PLATE WITH EURO SCREWS 14-222
80
SOFT CLOSE HINGES
Soft Close Kitchens
110° Soft Close Snap-On Hinge • • • • •
Snap-On Hinge Soft Close Cylinder Inside Hinge Arm 35mm Cup 45mm Drilling Pattern All Steel Construction
Doors
Kitchen Accessories
Hinges
• Satisfaction Guaranteed
Drawer Slides Plywood Melamine
Veneer
Edgebanding
Adjustable 2 PIECE PLATE
FACE FRAME PLATE
1 PIECE PLATE
0mm PLATE WITHOUT SCREWS 14-216
1mm PLATE WITHOUT SCREWS 14-224
0mm PLATE WITHOUT SCREWS 14-228
2mm PLATE WITHOUT SCREWS 14-218
3mm PLATE WITHOUT SCREWS 14-226
2mm PLATE WITHOUT SCREWS 14-230
Laminate
Solid Surface
Closets
0mm PLATE WITH EURO SCREWS 14-220
Furniture Hardware
2mm PLATE WITH EURO SCREWS 14-222
Pulls & Knobs
FULL OVERLAY
FULL OVERLAY
HINGE with Dowels 14-306
HINGE 14-302
E BL
TA S JU ARM D A E G M N A I C H
Lighting
Grommets
HALF OVERLAY HINGE 14-304
Locks, Lock Systems Molding, Carvings
Tools Adhesives Solvents Abrasives
INSET OVERLAY HINGE 14-308
Chemicals Staples Screws
81
SOFT CLOSE HINGES
Kitchens
Doors
Kitchen Accessories
Hinges
Speciality Soft Close 45° & 90° Soft Close Snap-On Hinge • Snap-On Hinge • Soft Close Cylinder Inside Hinge Arm • 35mm Cup • 45mm Drilling Pattern • No Dowels
E
BL A ST M U J AR D A E G M N A I C H
• Satisfaction Guaranteed
Drawer Slides Plywood Melamine
Veneer
Edgebanding
Laminate
Solid Surface
Closets
45° FULL OVERLAY
Furniture Hardware
Item Number 14-404
Grommets Locks, Lock Systems Molding, Carvings
Tools Adhesives Solvents Abrasives Chemicals Staples Screws
82
1 PIECE PLATE
Adjustable 2 PIECE PLATE
1mm PLATE WITHOUT SCREWS 14-224
0mm PLATE WITHOUT SCREWS 14-228
0mm PLATE WITHOUT SCREWS 14-216
3mm PLATE WITHOUT SCREWS 14-226
2mm PLATE WITHOUT SCREWS 14-230
2mm PLATE WITHOUT SCREWS 14-218 0mm PLATE WITH EURO SCREWS 14-220 2mm PLATE WITH EURO SCREWS 14-222
Pulls & Knobs Lighting
FACE FRAME PLATE
90° FULL OVERLAY Item Number 14-406
SOFT CLOSE HINGES E BL
TA S JU ARM D A E G M N A I C H
Speciality Soft Close 155° Soft Close Snap-On Hinge • Snap-On Hinge • Soft Close Cylinder Inside Hinge Arm • 35mm Cup • 45mm Drilling Pattern • No Dowels
• Satisfaction Guaranteed
Kitchens
Doors
Kitchen Accessories
Hinges
Drawer Slides Plywood Melamine
Veneer
Edgebanding
FACE FRAME PLATE
1 PIECE PLATE
Adjustable 2 PIECE PLATE
1mm PLATE WITHOUT SCREWS 14-224
0mm PLATE WITHOUT SCREWS 14-228
0mm PLATE WITHOUT SCREWS 14-216
3mm PLATE WITHOUT SCREWS 14-226
2mm PLATE WITHOUT SCREWS 14-230
2mm PLATE WITHOUT SCREWS 14-218
Laminate
Solid Surface
Closets
0mm PLATE WITH EURO SCREWS 14-220
Furniture Hardware
2mm PLATE WITH EURO SCREWS 14-222
Pulls & Knobs Lighting
FULL OVERLAY Item Number 14-408 H=0 90°
2.3mm,
The door combined with a mounting plate H=0, opens at 90° with a 2.3mm protrusion allowing inner drawers to be pulled out from inside of the cabinet.
Grommets Locks, Lock Systems Molding, Carvings
Tools Adhesives Solvents Abrasives Chemicals Staples Screws
83
SELF / SOFT CLOSE HINGES
Tiomos_4_11:Layout 1
Kitchens
4/8/11
3:10 PM
Page 4
Technical Information Hinge ForTiomos Tiomos Tiomos, a completely new hinge system.
Doors
Kitchen Accessories
With the new Tiomos hinge, Grass opens a new chapter in functional hardware which will inspire cabinet makers of the future. Years of research have been dedicated in developing the next generation of concealed hinges making sure that every detail, every function, and every mechanism is in perfect unison with each other. The result is excellence in a hinge system which meets and surpasses the technical and functional requirements of tomorrow’s hardware. Tiomos_4_11:Layout 1
4/8/11
3:10 PM
Page 2
Hinges
Drawer Slides Plywood Melamine
Veneer
Edgebanding
Laminate
Solid Surface
Number of hinges per door
The number of hinges required depends on the size and weight of the door. The distance between the hinges should be spaced as wide as possible. Use the diagram to determine the number of hinges needed. These TIOMOS HINGE SYSTEM It’s simply genius. recommendations are for doors without any The hinge system for the door to the future: accessory Maximum Stability. Total Design. One of theattachments. favored characteristics of the new Integrated Tiomos Soft-close. hinge system is the Soft-Close; Grass’ unique adjustable closing Stylish design. Maximum stability. Adjustable closing system.
Closets
Furniture Hardware
mechanism, which is fully integrated and concealed in the hinge arm. The closing process is extremely smooth from the degree that the Soft-close is activated until the door is completely shut. With our superb engineering and design, size and weight of the door will not be a factor. The Tiomos hinge system maintains the stability that surpasses all www.grassusa.com other hinges on the market. The cabinet doors pull open with ease and minimal gaps can be achieved with the new design of the hinge. Our developers set out to create a product innovation – a completely new hinge system. The result is Tiomos. Not only does Tiomos out perform any other hinge in the industry, but is also aesthetically pleasing to the eye. It offers a timeless design as well as its own individual character. Tiomos is a completely new hinge concept. The product range provides perfect movement for virtually every application, from standard doors to wide angle doors, from frameless applications to face frame applications.
Pulls & Knobs Lighting
Grommets Locks, Lock Systems
Tool-less Soft-close adjustment
The Tiomos offers an adjustable Soft-close mechanism, which is fully integrated and concealed in the hinge arm. The closing process is extremely smooth from the degree that the Soft-close is activated until the door is completely shut. With the superb engineering and design, size and weight of the door will not be a factor. The cabinet doors pull open with ease and minimal gaps can be achieved with the new design of the hinge. In summary, Tiomos offers the ideal solution to the ever increasing requirements of today’s manufacturers.
9-13 13-22 22-37 37-48
Soft-closing performance can be regulated for any door size and weight with the Tiomos adjustable integrated Soft-close. Depending upon the requirement,
Tool-less Soft-Close adjustment the Soft-closing settings can bebe adjusted 2 easily and without tools. With 2 hinges there are 6 Soft-close settings. Soft-closing performance can regulated for any door size and weight with the Tiomos adjustable integrated Soft-close. Depending upon the requirement, the Soft-closing settings can be adjusted easily and without tools. With 2 hinges there are 6 Soft-close settings.
1
2
3
Molding, Carvings
Tools Adhesives Solvents Abrasives Chemicals Staples Screws
Light setting Light setting Adjustment lever points toward the cabinet wall Adjustment lever points toward the cabinet wall Appropriate for:
Medium (factory setting) Mediumsetting setting (factory setting) Adjustment lever is parallel to the cabinet Adjustment levercovers is parallel to door the cabinet wall. This setting 80% of applications. wall. This setting covers 80% of door Appropriate for: •applications. Standard doors
Strong setting Strong setting Adjustment lever points toward the cabinet interior Adjustment lever points toward the Appropriate for: • Large, interior heavy doors cabinet
Appropriate for: • Small, light doors
Appropriate for: • Standard doors
Appropriate for: • Large, heavy doors
• Small, light doors
84
/32 [ [/32 ”]”]
[15/32”]
15
Overlay
3.5[1/[18/”]8”] 3.5 [1/8”]•3.5
RR
R 31
RR
Overlay R Comfortable depth adjustment threaded screw 31 with 31 Overlay Overlay Overlay Overlay CC CC TiomosCCClick-on 110 Overlay CC Overlay CC Overlay CC Drawing shows witha abase baseplate plate Drawing showsTiomos witha abase baseplate plate Drawing shows witha abase baseplate plateDrawing shows Drawing shows witha abase baseplate plate Drawing shows Tiomos Drawing shows Drawing shows Drawing shows Drawing shows Tiomos with aTiomos base with plate Drawing shows Tiomos aTiomos base with plate Drawing shows Tiomos withTiomos aTiomos base with plate Tiomos withTiomos aTiomos base with plate SELF / SOFT CLOSE HINGES Tiomos_4_11:Layout 1for 4/8/11 3:11 PM Page 15with 110° hinge standard doors height 02. height 02. height 02. height 02. X =+ +DTDT height 02. height 02. height 02. height 02. X = height 02. height 02. height 02. height 02. X = + DT
Tiomos 110 Drilling Distance (DD) DrillingDistance Distance(DD) (DD) Click-on Drilling Drilling Distance (DD) Drilling Distance (DD) Drilling Distance (DD) 3 4 5 6 7 3 4 5 6 3 4 5 6 7 3 4 5 6 77 3 4 5 6 7 3 4 5 6 7 1 3:11 PM Page 14 22.0 0 12.5 0 19.0 0 0.0 0 2 • 22.0 0 12.5 0 19.0 0 0.0 0 2 33 3-dimensional adjustment with suitable base plate 22.0 0 12.5 0 19.0 0 0.0 0 2 3 00 Patte Full Overlay Cranking mos_4_11:Layout 1 4/8/11 03:11 PM Page •14 21.0 11.5 0 18.0 0 0.5 3.5 21.0 0 11.5 0 18.0 0 0.5 3.5 Accommodates overlays up to11.5 22mm (7/8”) 21.0 0 0 18.0 0 0.5 3.5 Tiomos_4_11:Layout 1 4/8/11 3:11 PM Page 15 20.0 0 10.5 0 17.0 2 mm door 1.0 20Hinge 0 3 cup: •17.0 45 20.0 22 10.5 22 22steel, 33 nickel-plated Optimal reveal 20.0 200 10.5 thickness 200 17.0 0 200 up to 224 1.0 0 1.0 Kitchens Hinge arm: steel, nickel-plated Tiomos Click-on 110 Screw-on 10.0 16.5 1.5 3.5 • 19.0 22 33 10.0 16.5 1.5 3.5 Soft-close or Self-close hinges available 19.0 019.0 200 3 10.0 16.5 1.5 3.5 18.5 3.5 0 3 or22frameless • 18.5 3.5 9.5 22 33 16.0 33 2.0 22 33 For face20frame cabinets 18.5 3.5 9.5 09.5 200 3 16.0 016.0 2.0 22.0 3 DrillingDistance Distance(DD) (DD) Drilling Drilling Distance (DD) 3 4 5 6 3 4 5 6 77 3 4 5 6 7
DrillingDistance Distance(DD) (DD) Drilling Drilling Distance (DD) 3 4 5 6 3 4 5 6 77 3 4 5 6 7
Tiomos Click-on 110°
Description
plates 110°18.0Hinge For Standard Doors Doors 9.0 3.5 15.5 3.5 2 33 22 33 9.0 3.5 15.5 3.5 3.0 Comfortable screw3.5 Tiomos base Pattern 18.0 0 18.0 200 3 plates 9.0with threaded 15.5 3.5depth adjustment 3.0 2Type 33.0 2Cranking Full Overlay Cranking 00 Overlay 03Item No. • 3-Dimensional Adjustment With Suitable Base2Plate s 17.5 3.5 8.5 0 2 3 15.0 0 3 4.0 3 17.5 3.5 8.5 0 2 3 15.0 0 2 3 4.0 3 17.5 3.5 plate, 4 point fixing15.0 0 8.5 0 2 3 With pre-mounted 4.0 2 3 3 Soft-close Wing base 37/32 Euro screws (13.5 mm) F028138519228 • Accommodates Overlays Up To 22mm (7/8”) Hinge cup: steel, Hinge cup: steel, nickel-plated 8.0 nickel-plated 3.5 14.5 3.5 For Tiomos 45 17.0 22 14 33 1414 8.0 3.5 14.5 3.5 Kitchen 17.0 217.0 3hinges 8.0 3.5 14.5 3.5 • Optimal Reveal Up To 24 mm Door Thickness Hinge arm: steel, nickel-plated •
Patte
Reveal min (R) Reveal min (R)
32
Reveal min (R)
Door overlay 32 max. Door overlay max.
Door overlay max.
20
16 Euro screw Wood screw Dowel 0 F058139761228 Full Overlay Overlay Half Overlay Inset Minimum Gaps Reveal With 85°reduction reduction clip No. Plywood Minimum Gaps Reveal With 85° clip 20Overlay 32 ± 2 mm with worm gear 16 16 1685°Type Full OverlayHalfReveal Half Inset Inset PatternWith Item Minimum Gaps reduction clip overlay Cranking 9.5Overlay Melamine Patte 2 F058139762228 Overlay Overlay Half Overlay Inset Type Item Item No. PU Fullwith Overlay Cranking 00 Drilling Distance(DD) (DD) Pattern Drilling Distance (DD) Drilling Distance (DD) 3115 [17/ 32 ”] No.31 Drilling Distance Drilling Distance (DD) Drilling Distance (DD) 7/32”]pre-mounted Wing base plate, 2 point fixing 37/32 With euro screws (13.5 mm) ± 2.5 mm elongated holes 15 15 Drilling Distance (DD) Drilling Distance (DD) Drilling Distance (DD) [1 15 15 Soft-close F028138521228 3 F058139763228 [ / 16 ”] 7 15 24 minimum gap 15/16”] 24 [ /16”] 32”] [1 /Hinge 24is[is /16”] 16”] cup: steel, 40.5 [19/Hinge 24 [dimensions The Reveal31 dimensions minimum gap Reveal dimensions nickel-plated [19/16”] cup:F028138519228 steel, nickel-plated 15/16”] 40.5 Soft-close is BPH Reveal [15/minimum 16”] The gap 3BPH 7 Veneer 24The 45 9/16”] 77 4540.5F028138523228 24 BPH [115 3 4 5315 644 755 66BPH 3 4 533 3.5 644 755 66 7F058139764228 ± 2 mm 14 14,adjustment 1515 4BPH 533with 644[ elongated 755 66 77holes • Height 37 32 Hinge ±3 2.5 mm BPH via worm gear BPH cup: steel, nickel-plated were determined with were determined with BPH BPH Hinge arm: steel, Hinge arm: steel, nickel-plated 45 150 nickel-plated were determined with Self-close 36.0 11.1 10.3 F045138459228 BPH thegap gap betweenthe the Ø 5 BPH the between Edgebanding the gap between the 24.0 2.4 2.1 2.1 2.1 2.0 9.7 9.1 8.5 24.0 1.01.2* 1.02.1* 1.01.2* 1.2*2.1* 2.1* 37radius (ø6.3x13.5) 12 24.0 2.4 2.1 2.1 2.1 2.0 36.0 11.1 9.7 9.1 8.5 24.0 1.0 1.0 1.0 edge 24.0 2.1 2.1 36.0BPH 11.1 10.3 9.7 10.3 9.1 8.5 nickel-plated ananedge (of(of2.4 F045138457228 24.0Hinge 1.0 1.0 1.0 Self-close F045138461228 16steel, Height20 32Item No. PU ± 2arm: mm 14,2.1 15 2.0 an edge14 radius (of radius 84.5 [3 5/16”]
Cranking 19 32
Cranking 9.5 84.5 [3 5/16”]
Cranking 00
-on 110 tandard doors oorsclosed doorclosed closed doorand andthe the door and the
16
7.5 7.5 x13.5) 27.5 (Ø6.3 123 7.03.5 7.0 7.0
84.5 [3 5/16”]
16
14.0 22 33 214.0 3 Available 13.5 3.5 13.5 3.5 3.5
Door overlay max. Door overlay max.
Back Bore ± 2 mm with worm gear
Door overlay max.
Door overlay max. Door overlay max.
Door overlay max.
45 Self-close Hinge arm:F045138457228 steel, nickel-plated Accessories 2 3 2 3 14.0 37 Height Item No. PU Hinges 3.5 3.5 13.5 0 F058139761228 150 • For Face Frame Or Frameless Cabinets Hinges 15.5 3.5 15.5 3.5 6.5 22 33 15.5 3.5 6.5 2 03 36.5 22 33 2 13.0 With 2 13.0 313.0 Pattern Type Patte Overlay Cranking Half overlay Cranking 9.5Item No.150 F058139762228 Base plate overview • Comfortable Depth Adjustment Threaded Screw 15.0 33 6.0 3.5 12.5 base 3.5 6.0 3.5 12.5 3.5 Wing plate, 4 point fixing 6.0 37/32 With pre-mounted Euro screws ( 15.0 3 15.0 3.5 12.5 3.5 Soft-close F028138520228 3 F058139763228 150 Height adjustment14.5 Attach withWith Hinge cup:Plate, steel, Hinge cup: steel, nickel-plated Drawings Show Tiomos Base 02. 3.5 5.5 nickel-plated 3 12.0 33 45 45 5.5 3Height 12.0 Drawer 14.5 3.5 14.53.5 5.5 3 12.0 3 • Height adjustment via worm gear 3.5 F058139764228 Hinge arm:F045138458228 150 steel, nickel-plated steel, nickel-plated Ø(BPH) 5 Hinge arm: Wood screw Euro screw Dowel Type Height adjustment with Set Line BasePlate Plate Height (BPH) 5.0Plate 3.5Attach BasePlate Plate Height (BPH) Self-close BasePlate Plate Height(BPH) (BPH)Slides 11.5Plate 3.5Base BasePlate Plate Height(BPH) Full Overlay Height (BPH) 5.0 3.5 Base Height Height 11.5 3.5 Height Half Overlay Inset x13.5)Base Base Plate Height (BPH) 5.0 3.5 Base Height (BPH) Height (BPH) 11.5 3.5 Base Height (BPH) 12 PlateBase Tiomos Click-on 110Base Screw-on Dowelled 37(BPH)(Ø6.3 Height Item No. 16.53.5 3.5 16.5 3.5 16.5 • Soft-Close Or Self-Close 16.0 2 3 2 3 16.0 2 16.0 3
32
33[[1/1/88”]”]
3 [1/8”]
12.6 [1/2”] min. min. 12.6 [1/2”]
32
[1/2”] min. 12.6 [117/32”] 39 39 [117/32”]
39 [117/32”]
32
32
Door Thickness Door Thickness
32
Door Thickness
9.5 9.5
9.5
86 [3 3/8”]
86 [3 3/8”]
86 [3 3/8”]
32
32
Door Thickness
Door Thickness Door Thickness
84.5 [3 5/16”]
84.5 [3 5/16”]
84.5 [3 5/16”]
Door Thickness Door Thickness
84.5 [3 5/16”]
84.5 [3 5/16”]
Door Thickness
84.5 [3 5/16”]
the door)ofof1mm! 1mm! the door) 22.01.6 1.61.5 1.61.5 1.637 1.5 1.5 1.5 30.04.4 5.44.3 4.84.2 4.4 4.3 4.3 4.2 4.2 22.01.0 1.01.0 1.01.5* 1.0 1.0 1.01.5* 1.5* 1.6 1.6 1.6 1.5 5.4 4.8 4.4 1.0 1.0 1.0 the door) of 1mm! 22.0 1.6 22.0 1.6 30.0 5.4 30.0 4.8 22.07 1.0 22.0 1.0 37 67/16”] F058139873217 150 37 32 Hingedimensions dimensions 7/16 37 [1 Hinge / 16”] 7/16”] front of the cabinet. 7/16”] 37[1 front of the cabinet. 16 ”] Hinge dimensions 7 37[1 [1 37[1 front of the cabinet. 21.0 1.4 1.3 1.3 1.3 1.3 1.3 1.3 1.3 28.03.5 3.73.4 3.6 3.5 3.5 3.4 3.3Laminate 16 ”] 1.4 21.0 21.01.0 1.0 1.0 1.0 1.0 1.0 1.0 1.01.2* 1.2* 1.4 1.3 3.7 3.6 3.4 3.3 37[1/calculation 7/ 1.0 Pattern Type Item No. 21.0 1.3 28.0 3.7 28.0 3.6 16”]1.3 1.3 12 [11.3 21.0 1.0 21.0 1.0 andreveal reveal 37[17/16”] F058139874217 calculation ”] and revealand 37[17/16Inset ± 2.5 mm 17 1.0 1.2* X 3.3 • 3-dimensional X150 adjustment with suitable baseplate, plate 2 calculation Pattern Typeon Item No. Item No. PU Overlay Cranking 03 20.0 1.1 1.1 1.1 1.1 1.1 26.0 2.9 2.8 2.8 2.7 2.6euro screws ( Wing base point fixing 37/32 With pre-mounted 20.0 1.0 1.0 1.0 1.0 1.0 based on factory 20.0 1.1 1.1 1.1 1.1 1.1 26.0 2.9 2.8 2.8 2.7 2.6 X 1 20.0 1.0 1.0 1.0 1.0 1.0 based factory 20.0 1.1 1.1 1.1 1.1 1.1 26.0 2.9 2.8 2.8 2.7 2.6 Soft-close F028138522228 20.013[ 1.0/2”]1.0171.0 13[ 1.01/2”] 1.0 based on factory 19 F058139875217 150 ± 2 •mm 3-dimensional adjustment with suitable base plate 9.5 ± 2.5 mm 17 1/2Accommodates • *only achievable with overlays up to 22mm (7/8”) setting. Hinge cup:F028138520228 steel, nickel-plated *only achievable setting. ”] 32with 13[ Soft-close F028138524228 *only achievable with 45 19.0 0.9 0.9 0.9 0.9 0.9 24.0 2.2 2.1 2.1 2.1 2.0Solid setting. 19.0 1.0 1.0 1.0 1.0 1.0 19.0 0.9 0.9 0.9 0.9 0.9 24.0 2.2 2.1 2.1 2.1 2.0 19.0 1.0 1.0 1.0 1.0 1.0 0.9 0.9 0.96 0.9 0.9 24.0 2.2 2.1 2.1 2.1 2.0 19.0Hinge 1.0 cup: 1.0 steel, 1.0 1.0 1.0 nickel-plated Ø 5 19.0 Hinge arm: steel, nickel-plated Self-close12 F045138460228 Accommodates overlays up to ± 2 •mm 17(7/8”) 45 150 • Optimal ± 222mm mm 17 120°angle angle reduction reveal up to 24 mm1.0door thickness 120° reduction 37 (ø6.3x13.5) 120° 18.0 0.7 0.7 0.7 0.7 0.7 22.0 1.6 1.6 1.6 1.5 1.5Surface DD 18.0 1.0 1.0 1.0 1.0 18.0 0.7 0.7 0.7 0.7 0.7 22.0 1.6 1.6 1.6 1.5 1.5 DT DD 18.0 1.0 1.0 1.0 1.0 1.0 DT angle reduction IMPORTANT DD 1.0 0.7 0.7 0.7 0.7 22.0 1.6 1.6 1.6 1.5 1.5 DT Height Item No. nickel-plated 18.0Hinge 1.0 arm: 1.0 steel, 1.0 1.0 IMPORTANT ToTo 0.7 F045138458228 DT Self-close F045138462228 IMPORTANT To DD 18.0 • Optimal reveal DDDT up10 2432mm ±door thickness hinges available DT 17 determine DDDT DD1.3 1.3 1.3DD •toSoft-close clip Self-close 2or17.0 mm clip DT DT 2x R the clip 17.0 0.6 0.6 0.6 0.6 0.6 21.0 1.4 1.3 determine the R 17.0 1.0 1.0 1.0 1.0 1.0 17.0 0.6 0.6 0.6 0.6 0.6 21.0 1.4 1.3 1.3 1.3 1.3 15 DT 1.3 1.0 1.0 1.0 1.0 1.0 1.0 2x R 27/0.6 determine 12 R 1.0 17.0 0.6 0.6 21.0 1.4 1.3 1.3 1.3 [ /16”] the 10 [15/ 6 F058139873217 10 DD 17.0 1.0 1.0 1.0 [ 32”] 0.6 0.6 27 21.5 12 16 ”] DT 1515/16”] correct DD hinges available correct application 2x R 21.5 [ /32”][1/DD • [For [15/32or ”] RSelf-close correct 15/32face frame or frameless cabinets 12• Soft-close 15 application R 1.1 10 [27/3237 ”]application (ø6.3x13.5) 20.0 ”] 12 8”] 0.6 (ø6.3x13.5) 16.0 0.6 3.5 0.60.6 0.6 0.6 0.6 0.6[1/37 20.01.1 1.1 1.1 1.1 1.1 1.1Closets R 1.1 DD12 16.0 1.015 1.01.0 1.0 1.0[1.0 1.0 16.0 0.6 0.6 0.6 1.1 1.1 1.0 1.0 1.0 1.0 8”] 3.5 R 21.5 0.6 20.0R1.1 31 1.1 1.1 121.11.1 F058139874217 Overlay 16.0 1.0 16.0 1.0 1.0 1.0 [15/32 ”] • Zinc 1/8”]0.6 0.6 Grassstrongly strongly die-cast/Steel, nickel plated R 16.0 0.6 Grass 31 Overlay [ Overlay 3.5 • For face frameCC Grass strongly or frameless cabinets • Overlay R threaded Patternscrew recommends Type Item No. Item No. PU 31 Overlay Comfortable Half overlay Cranking 9.5adjustment with CC depth 19.0 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 trialOverlay a atrial 19.0 0.9 19.0 0.9 0.9 19 0.9 F058139875217 a trial • Height adjustment via worm gear CC Overlay recommends CC • Comfortable Overlay depth adjustment with threaded screw Overlay recommends CC mounting forallall mounting for Soft-close F028138521228 F028138525228 18.0a0.7 0.70.7 0.70.7 0.7 0.7 0.7 0.7 0.7 CC mounting for all Drawing 18.0 0.7 0.7 0.7 18.0 0.7 0.7 Drawing shows Tiomos with a base plate Drawing shows Tiomos with a base plate shows Tiomos with a base plate Drawing shows Tiomos with base plate Furniture 6 Ø 5 plate Drawing shows Tiomos with asteel, base plate Tiomos with a base plate Drawing shows Tiomos with a base Drawing shows Tiomos150 with a base plate Hinge cup: nickel-plated Drawing shows hinges and base hinges and base 45 hinges and base g shows height TiomosSelf-Close with a base plate Drawing shows Tiomos with a base plate Drawing shows Tiomos with a base plate Drawing shows Tiomos with a base plate Hardware Reveal (R)height 02. 16.0 0.60.6 0.6 0.6 0.6 0.6 0.6 0.6 Screw-on. .............. 12-610 Self-Close Screw-on. . ............. 12-612 Self-Close Screw-on. . ............. 12-614 02. height 02. height 02. X = + DT Minimum gap Reveal (R) 16.0 0.6 0.6 0.6 Minimum gap Item No. Reveal (R) 16.0 0.6 0.6 0.6 0.6 height 02. height 02. height 02. height 02. X = + DT Hinge arm: steel, nickel-plated plates. Minimum gap Cover capF045138463228 Self-close F045138459228 plates. plates.height 02. height 02. 02.Screw-on.............. 12-602 heightSoft-Close 02. X = + DT Self-Close Dowels.................. 12-611 Soft-Close Screw-on.............. 12-604 Reveal (R) Drilling Distance (DD)Distance (DD) Drilling Distance (DD)Distance (DD) Drilling Distance (DD)Distance (DD) Drilling Distance (DD) Reveal (R) F072135500247 Drilling Drilling Drilling Drilling Distance (DD) Reveal (R) Steel, (DD) nickel-plated 19 Ø 5Distance Ø5 Pulls Tiomos_4_11:Layout 1 4/8/11 3:1112 PM Page 15 Drilling Distance (DD) Drilling Distance (DD) Drilling Distance (DD) Drilling Soft-Close 12-600 (ø6.3x13.5) (ø6.3x13.5) 3 4 5 Screw-on.............. 63 74 5 6 7 3 4 5 63 74 5 6 377 3 4 5• Zinc 63 die-cast/Steel, 74 5 6 nickel 3 4 125 63 74 5 6 37 & 7 7 plated Screw-on Dowelled Cup dimensions Screw-on Dowelled Cup dimensions Screw-on Cup dimensions 3 4Inset 5Soft-Close 6 7 3 4 5 6 7 Item No. Dowels.................. 3 4 12-601 5 6 7Dowelled 3 4 5 Item 6 No. 7 Pattern Type PU Knobs 22.0 0 12.5gear 0 0.0 0 0.0 2 30 22.0 0 19.0 12.5 0 19.0 2 3 • Height0adjustment via0 worm 0 Tiomos wing base 0 Wing 12.537/32 0 0.0 screws 0 F028138526228 2 3 steel base 19.0 plate, 3 point fixing 0 For wood plates Soft-close F028138522228 21.0 0 11.5 0 18.0 0 0.5 3.5 .1 0 21.0 +0.1 Hinge3 11.5 0Hinge arm cover cap 0.5 18.0 0 3.5Item No. +0+.10 steel, nickel-plated 5 cup: 5 3 18.0 45 150 0 0 11.5 0 0 0.5 3.5 Lighting 35 20.0 0 2Hinge 0 2 No. 17.0 0 Cover cap 2 Self-close 1.0 0 nickel-plated 2Opening 30 Item PU 20.0 0 arm: steel, 2 nickel-plated 10.5 0 2 17.0 0 2 10.5 1.0 2 Restrictions 3[1 F045138460228 F045138464228 F072135503228 Angle plate Steel, 17 17 /”] 32”] 39 [1 / 32 17/32”] 39 0 0 2 10.5 37 0 2 17.0 0 2 1.0 0 2 No.3 26 [1 Height Item PU 39 Screw-on Steel, nickel-plated Dowelled 0 19.0 3 2 30 10.0 1.5 150 3.5 2 19.0 2 3 16.5 10.0 F072135500247 Ø5 16.5 1.5 3.5black Plastic, Ø5 12 0 0 2 3 10.0 16.5 1.5 3.5 F058139721228 150 Screw-on Dowelled 18.5 3.5 0 9.5 2 30 0 0 16.0 2 30 2.0 2 2.0 3 18.5 3.5 16.0 2 1 3 4/8/11 2 3 9.5 Tiomos_4_11:Layout 2 Plastic, 3 15 black Grommets 7/16”] 7/16 Page [2 [2 ”] 3:11 PM 62 7 62 5 3.5 9.5 0 2 3 16.0 0 2 3 2.0 2 3 45 [2 /16F058139722228 ”] 2 150 45 62 45 18.0 0 2 30 9.0 3.5 15.5 3.5 Screw-on 18.0 2 Tiomos 3 9.0 3.5 3.0 2 3 3.0 2 For 15.5steel 3.5 Tiomos 3 wood screws Wing fixing Dowels 37/32 Pattern 15.5 Type Item base No. plate, Item PU 0nking 0 00 2 3 9.0 3 point 3.5 No. 3.5 3.0 2 3F058139723228 3 150 2 3 17.5 3.5 8.5 0 2 30 Item No. 15.0 0 21Hinge 30 arm cover 4.0 PU 3 Locks, 17.5 3.5 Item 8.5 2 3 15.0 2 Item 3cap 4.0 3 Pattern Type No. PU 5ickel plated 3.5 8.5 0No. 2 F028138523228 3 15.0Soft-close 0 via elongated 2 3 screw F028138519228 4.0 3 • Height adjustment 3.5 F058139724228 150Lock holes 2 17.0nickel-plated 2 17.0 3 14 8.0 3.5 14.5 3.5 3 1111 1 ge cup: steel, 2 3 14 Height adjustment 8.0 F072135503228 3.5 14.5 via 3.5nickel-plated 10 Steel, 11 Item Systems 150 Side Adjustment3.5 Depth adjustment Soft-close F028138519228 F028138523228 37 26 150 via worm gear45nickel 0and depth 2 adjustment 3 14 8.0 14.5 3.5 Height No. • Steel, plated ge nickel-plated Self-close F045138457228 F045138461228 tedarm: steel, 16.545 3.5 7.5 2 3 14.0 2 3 16.5 3.5 7.5 2 3mm 14.0 2 3 Wing±2 base plate, 4 point150 fixing +3/-2 37/32 With pre-mou base plate 1 via3.5hinge mm 5justment 7.5 2 3 14.0 2 3 0 F058139721228 Side Adjustment Depth adjustment Height adjustment via • Height and depth adjustment via worm gear ated F045138457228 F0451384612287.0 Molding, 16.0 2 3 Self-close 3.5 13.5worm gear± 3.52 mm Via 16.0 2 3 7.0 3.5 13.5 3.5 Carvings 0 2 3 7.0 37/32 base 3.5 plate 13.5 3.5 2 F058139722228 Wing •steel base plate, 3 point fixing holes ± 2.5mm For pan ±2 head mm Euro screws +3/-2 mm adjustment via hinge Via elongated 15.5 3.5 15.5 Side 6.5 2 3 13.0 2 3 3.5 6.5 2 3 13.0 2 3 Via worm gear±Item 2 mm 37 (Ø6.3 3x13.5) 12 Height Pattern 13.0 2 Type Item No. 6.5 2 3 No. PU 03 5nking3.5 3 F058139723228 15.0 3 6.0 holes3.5 12.5 3.5 12.5 • Steel, Nickel Plated Via elongated ± 2.5mm 15.0 3 6.0 3.5 3.5 0 Pattern Type Item Item No. PU options canvia be made independently another. Item No. (ø6.3x13.5) • Height adjustment 0 3 6.0 3.5 12.5Soft-close 3.5 No. All adjustment 3.5 F058139724228 elongated screw holes of one F028138520228 F028138524228 Height PUTools •nickel-plated Height And3.5Depth Adjustment 14.5 3.5 12.0 Via 3 Worm 12 3 37 5.5 26 3 ge cup: steel, 10 Gear 14.5 5.5 12.0 3 45 12.0 F028138520228 150 2 F028138524228 All adjustment options can be made independently of one another. 5 3.5 Cover cap Soft-close 37/32 5.5 3 3 0 F058139731228 150 wood screws Item No. PU No.For PU Opening Angle Restrictions plate Side Adjustment Via Hinge ge nickel-plated Base Plate Height (BPH) 5.0 3.5 Base150 Plate Height (BPH) Base Plate Height (BPH) 11.5Item 3.5 Base Plate Height (BPH) F045138458228 F045138462228 tedarm: steel,•45 Base Plate Self-close Height (BPH) 5.0 3.5 Base Plate Height (BPH) Base Plate Height (BPH)3 11.5 3.5 Base Plate Height (BPH) Base Plate Height (BPH) 5.0 3.5 Base Plate Height (BPH) Base Plate Height (BPH) BaseF072135500247 Plate Height (BPH) 2 F058139732228 150Adhesives F072135751117 50 150 ated Wing black nickel-plated base plate,Steel, 4 point fixing 11.5 3.5 37/32 ForPlastic, wood screws Self-close F045138458228 F045138462228 Wing base plate, 4 point fixing Solvents 3.5 37/32 Heightfixing adjustment via worm gear3 PU Wing steel base plate, 3• point 37/32 F058139733228 For pan head Euro screws 37 Height Item No. 150Abrasives Ø 5 F072135751540 Minimum Gaps Reveal With 85° reduction clip 500 clip Plastic, black MinimumPattern Gaps Reveal With 85° reduction Item No. PU reduction nkingGaps 9.5 mum Reveal With clip20 32 PU 0 Item 150 • Height adjustment Type 3.5 F058139734228 37 No. F058139746228Drilling via elongated screw holes Height Item No. 85° Drilling Distance (DD)Distance Drilling Distance (DD)Distance150 Distance (DD) Drilling (DD) Drilling (DD) Drilling Distance (DD) Chemicals 37 (ø6.3x13.5) Pattern Type Item No. Item No. PU Drilling Distance (DD)Soft-close Drilling Distance (DD) 150Height Drilling (DD) Ø 5 Distance Item No. F028138521228 F028138525228 2 F058139747228 150 TheHinge minimum gap is Reveal dimensions Item No. PU Staples 0 F058139746228 arm cover cap gap3 is 4 5 6 7 12 The minimum Reveal dimensions 37 26 3 4 5 6 7 3 4 5 6 7 ge cup: steel, nickel-plated 3 4 5 6 1507 3 4 5 6 7Screws 3 4 5 6 dimensions 7 were determined imum gap is Reveal 456 7 F028138521228 with Soft-close F028138525228 3 4 5 6 7 3 4 5 6 7 0 F058139731228 3 4 5 3 F058139748228 150 were determined with the gap between the 2 2.1 F058139747228 F072135503228 150Wing base24.0 Steel, the gapnickel-plated between the 1.0 Self-close ge arm: steel, nickel-plated 2.4F045138463228 2.1 36.0 11.1 10.3 36.0 9.7 150 9.1 8.5 9.7 9.1 8.5 F045138459228 ted were determined with radius 24.0 1.0 1.0 1.2* plate, 2 2.1 point fixing 37/32 With pre-mou an edge (ofedge radius 24.0 2.4 2.0 2.1 2.1 2.1 2.0 11.1 10.3 150 24.0 1.0 2.1* 1.0 1.0 1.2* 2.1* between the 45 an (of 24.0 2.4 2.1 2.1 2.1 2.0 36.0 11.1 10.3 9.1 8.5 2 F058139732228 Wing1.0 steel plate,F045138459228 3 point fixing 37/32 With euro9.7 screws (13.5 mm) 1.0 1.0base 1.2* 2.1* 150pre-mounted and the an edge 3.5 radius 3 F058139748228 150 ated closed door 24.0 Self-close the(ofdoor)F045138463228 ofF058139749228 1mm! closed door and the32 22.0 1.6 1.6 1.6 1.5 1.5 30.0 5.4 4.8 4.4 4.3 4.2 20 22.0 1.0 1.0 1.0 1.0 1.5* the door) of 1mm! 22.0 1.6 1.6 1.6 1.5 1.5 30.0 5.4 4.8 4.4 4.3 4.2 22.0 1.0 1.0 1.0 1.0 1.5* mdoor gearand the the door) of 1mm! 22.0 Hinge 1.6 1.6 1.6 1.5 3.5 1.5 30.0 5.4 4.8 4.4 4.3 4.2 3 F058139733228 Hinge dimensions 1.0 1.0 1.0 1.0 1.5* front of the 22.0 cabinet. 150 F058139749228 dimensions front of the21.0 cabinet. 21.0 1.4 1.3 1.3 1.3 1.3 28.0 3.7373.6 28.0 3.5 3.4 (ø6.3x13.5) 1.0 1.0 21.0 1.0 1.0 1.2* 21.0 1.4 1.3 1.3 1.3 1.3 3.7 3.3 3.6 12 3.5 3.4 3.3Height 20 32 Hinge dimensions 1.0 1.0 1.0 1.0 1.2* • Height adjustment via worm the cabinet. and reveal calculation Pattern Item No. PU (ø6.3x13.5) • Height21.0 • Item reveal calculation 21.0 and 1.4via 1.3 1.3 1.3screw 1.3 28.0 3.7 3.6No. 3.5 3.4 3.3 gear3.5 adjustment worm F058139734228 HeightNo. adjustment elongated holes 1.0 1.0via1.0 1.0gear 1.2* Type Height Item PU Ø5 and reveal calculation 1.112 1.1 1.1 26.0 2.9 2.8 26.0 2.8 2.7 1.0 1.0 20.0 1.0 1.0 37on20.0 261.1 1.1 20.0 1.1 2.9 2.6 2.8 2.8 2.7 2.66 1.0 1.0 1.0 based on factory based factory Pattern Type20.0 Item1.0 No. 1.0 1.00mm Item No. PU 1.1 1.1 1.1 1.1 26.0 Ø 5 20 Soft-close F028138522228 F028138526228 20.0 1.1 1.1 1.1 1.1 1.1 2.9 2.8 2.8 2.7 2.6 37/32 For Euro screws Screw-on. . ...................... 12-960 20.0 with 1.0 .1.0 1.0 1.0 1.0 12-964 based on factory Screw.................... 12-961 00mm EuroF058139736228 150 0mm Screw-on. ...................... *only achievable setting. *only achievable with setting. 19.0 0.9 0.9 19.0 0.9 0.9 24.0 2.2 2.1 24.0 2.1 2.1 19.0 45 1.0 1.0 19.0 1.0 1.0 ge cup: steel, 0.9 0.9 0.9 0.9 0.9150 0.9 2.2 2.0 2.1 2.1 2.1 2.012 1.0 1.0 1.0 1.0 1.02mm 1.0 Screw-on. chievable withnickel-plated setting. F028138522228 F028138526228 ...................... 12-962 Euro Screw.................... 12-963 2mm Screw-on. .1.0 ...................... 12-965 19.0 .0.9 0.9 0.9 0.9For 0.9 2.2 2.1 2.1 2.1 2.0 19.0 Soft-close 1.0 1.0 1.0 1.0Self-close 22mm24.0 F058139737228 150 120° angle reduction Wing base plate, 4 point fixing 37/32 Euro screws 10steel, ge nickel-plated F045138460228 F045138464228 120° angle18.0 reduction tedarm: 18.0 0.7 0.7 0.7 0.7 0.7 22.0 1.6 1.6 1.6 1.5 1.5 1.0 1.0 1.0 1.0 1.0 45 150 18.0 0.7 0.7 0.7 0.7 0.7 22.0 1.6 1.6 1.6 1.5 1.519 IMPORTANT To 18.0 1.0 1.0 1.0 1.0 1.0steel base plate, ngle reduction IMPORTANT To Wing 3 point fixing 37/32 With pre-mounted 18.0 0.7 0.7 0.7 0.7 0.7 22.0 1.6 1.6 1.6 1.5 1.5 (Ø6.3F045138460228 x13.5) 12 IMPORTANT 18.0 Self-close 1.0 1.0 1.0371.0 1.0 3 F058139738228 150euro screws ( ated clip Height Item No. PU To F045138464228 clip determine the determine 2 point 37/32 17.0 1.4 fixing 1.3 21.0 1.3 1.3 17.0 1.0 1.0 17.0 1.0 1.0 the0.6 0.6 0.6 17.0 0.6 0.6 0.6 0.6 0.6Wing 0.6 base 0.6 plate, 21.0 1.4 1.3 1.3 1.36 1.3 1.3 1.0 1.0 1.0 1.0 1.0 1.0 Ø 5 determine 17.0 0.6 0.6 0.6 0.6 0.6 21.0 1.4 1.3 1.3 1.3 1.3 17.0 1.0 1.0 1.0 1.0 1.0 correct(Ø6.3 application 3.5 F058139739228 150 x13.5) 0 the37 F058139756228 150 • Height 12application correct adjustment elongated screw holes Height Item No. PU 16.0 0.6 0.6 0.6 0.6 0.6 20.0 1.1 1.1 1.1 1.1 1.1 16.0 1.0 1.0 16.0 1.0 via 1.0 1.0 16.0 0.6 0.6 0.6 0.6 0.6 20.0 1.1 1.1 1.1 1.1 1.1 correct 1.0 1.0 1.0 1.0 application 1.0 Grass strongly (ø6.3x13.5)
32
Reveal min (R)
32
Reveal min (R)
Reveal min (R)
32
Door overlay max.
Door overlay max.
Door overlay max.
Door overlay max.
Door overlay max.
ess
ess
s
ess
ess
32
32
32
32
32
Door overlay max.
Door overlay max.
Description
s
Door overlay max.
Wing Steel Base Plate, 3 Point Fixing
85
3.5 [ /8”] DD
eal 2x R
DT DD Reveal 1/2”] Gaps 13 [Minimum
6 [ /4”]
DT
DT DDWith 85° reduction clip 3.4 R Overlay(DD) Drilling Distance CC
D DD 0.4 [1/64”] Overlay CC Drilling Distance (DD)
SELF / SOFT CLOSE HINGES
15.6 [5/8”]
Drilling Distance (DD)
eal dimensions 3 4 5 6 CC7 e] determined with 24.0 2.4 2.1 2.1 2.1 2.0 dge radius (of shows1.5 Tiomos Distance (DD) door) of 1mm! 22.0 1.6Drawing 1.6 1.6 1.5 with a cranking 0 e dimensions hinge, Base Plate Height 5 6 7 8 9 21.0 10 1.4 1.3 1.3 1.3 1.3 (BPH) 02 and spacer reveal calculation plate height 19. X = 38.5 + DT Kitchens 0 1.1 1.1 1.1 1.1 1.1 20.0 ed on factory 0 19.0 0.9 0.9 0.9 0.9 0.9 ng. Description
3
4
5
6
The minimum gap is
7
3 4 5 6 7 the gap between the 36.0 11.1 10.3 9.7 9.1 8.5 24.0 1.0 1.0 1.0 1.2* 2.1* Drilling Distance (DD)closed door and the Drilling Distance (DD) 30.0 5.4 4.8 4.4 4.3 4.2 22.0 1.0 1.0 1.0 1.0 1.5* 3 4 5 6 7 8 front 9 of 10 the cabinet. 3 4 5 6 7 8 9 10 28.0 3.7 3.6 3.5 3.4 3.3 21.0 1.0 1.0 1.0 1.0 1.2* 25.0 0 22.0 0 26.0 2.9 2.8 2.8 2.7 2.6 20.0 1.0 1.0 1.0 1.0 1.0 24.0 0 21.0 0 *only achievable with 24.0 2.2 2.1 2.1 2.1 2.0 19.0 1.0 1.0 1.0 1.0 1.0 23.0 0 2 20.0 0 2 Doors0 2 120° angle reduction 120° Hinge For Standard Doors 18.0 0.7 0.7 0.7 0.7 0.7 22.0 1.6 1.6 1.6 1.5 1.5 18.0 1.0 1.0 1.0 1.0 1.0 ORTANT To 22.0 0 2 3 19.0 0 2 3 0 3 •23-Dimensional Adjustment With Suitable Base Plate • 3-dimensional adjustment suitable baseclip plate Drilling (DD) rmine the 17.0 0.6 0.6 0.6 0.6 0.6Distance 21.0 1.4 21.0 1.3 1.3 1.3with1.3 17.0 1.0 01.0 1.02 1.0 0 2 3 18.0 3 1.0 Kitchen2 •3Accommodates Overlays Up To 22mm (7/8”) 0 • Accommodates overlays up to 22mm (7/8”) ectAccessories application 3 0.6 4 5 6 7 16.0 0.6 0.6 0.6 0.6 20.0 1.1 20.0 1.1 1.1 1.1 0 1.1 2 3 16.0 01.0 1.02 1.03 1.0 1.0 17.0 • Optimal reveal up to 24 mm door thickness ss 0 strongly 2 3 • Optimal Reveal Up To 24 mm Door Thickness 0 Hinges 2 Available 3 19.0 0.9or19.0 0.9 0.9 0hinges 0.9 0.9 Self-Close 2 3 16.5 3.5 mmends a trial • Soft-Close Or0.0 • Soft-close Self-close available 3.5 Hinges • For Face Frame Or Frameless Cabinets nting for all 0.5 3.5 • For18.0 0.7 0.7 0.7 cabinets 0.7 3.5 18.5 16.0 0 2 3 face 0.7 frame or frameless 2 base 3 es and • Comfortable Depth Adjustment With Threaded Screwdepth adjustment with threaded screw • Comfortable18.0 1.0 0 Reveal (R) 2 3 15.5 3.5 16.0 0.6 0.6 00.6 0.62 0.63 Minimum es. 3.5 Drawer Slides 17.5Reveal (R) 3.5 15.0 0 2 3 1.5 3.5 2 3 Full Overlay Full Overlay Overlay Half Overlay 17.0 2 3 14.5 3.5 2.0 2 3 3.5Plywood Cup dimensions Screw-on 16.5 15 3.5 14.0 31[1 27/323”] 2 3 16”] 3 Melamine 24 [15/3.0 24 [ /16”] 16.0 2 3 13.5 3.5 4.0 BPH 3 BPH .5 +0.1 5 Veneer 3 15.5 3.5 13.0 2 3 Edgebanding Door Thickness
84.5 [3 5/16”]
Door overlay max.
3 [1/8”]
11.5 3.5
DD PU
2x R /8”] 22 [7F028138523228
Pattern Type Drilling Distance (DD) front Soft-close of the cabinet. 3 4 5 6 7 45 Self-close 19.0 0
Item No.
Drilling Distance (DD)
12.0
Cranking 00 3.5
6.0 Full overlay
3.5
Screw-on 3
Tiomos 160
11.5 3.5 Base Plate Height (BPH) 0.1
35 +
Reveal
Drilling Distance Full (DD) overlay
5.5 3
64 [2 17/32”]
Dowelled
Overlay
67 [2
5.0 3.5 BaseBPH Plate Height (BPH)
With 85° Angle Reduction clip Cranking 37 Drilling00 distance (dd) [115/16”]
84.5 [3 5/16”]
39
12.5
84.5 [3 5/16”]
Base Plate Height (BPH)
Door Thickness
Door overlay max.
15.0 3
• For Door Thicknesses Up To 32 mm 14.5 3.5 Cup dimensions • Minimal Reveal
150
9 10 1.0 1.0 Item No. PU Distance (DD) 1.0 1.0Drilling 1.0 F028138524228 1.0 1.0 3 1.04 5 6 7 150• 3-dime 1.012.5 1.0F045138462228 1.0 1.0 1.0 01.0 1.0 •1.0 Accom 0 1.011.5 1.0 1.0 1.0 1.0 1.0 1.0 •1.0 Soft-cl 1 10.5 4/8/11 3:11 PM21.0Page 13 0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 • Item No. PU For fac 1.010.0 1.0F028138525228 1.0 1.0 1.0 1.0 1.0 •1.0 Conven 2 31.0 1.0150•1.0 1.0 9.51.0 1.00 1.0 1.0 Zero p 1.0 9.01.0F045138463228 1.0 1.0 1.0 3.51.0 1.0 •1.0 10mm 2 1.0 3 1.0 8.51.0 0 1.0 1.0 1.0 1.0 •1.0 For doo 1.0 8.01.0 1.0 1.0 1.0 1.0PU•1.0 Minima Item1.0 No. 3.5 3 1.0 1.0 1.0 1.0 1.0 7.51.0F028138526228 1.02 1.0 3.5 1.0 1.0 1.01501.0 1.0 7.01.0 1.0 1.0 6.5 F045138464228 2 3 Minimum gap
Door overlay max.
8
Tiomos Click-on 160°
Pat
Reveal dimensions 3 4 5 6 7 6 7 Hinge3cup:4 zinc,5 nickel-plated 4 were determined with 24.0 6.4 5.4 4.4 3.4 2.4 36.0 11.1 10.3steel/zinc, 9.7 9.1 8.5 Hinge arm: 24.0 1.2 2.1 3.0 3.9 4.7 an edge radius (of closed door and the nickel-plated the door) of 1mm!45 22.0 3.0 2.0 1.5 1.5 1.5 30.0 5.4 4.8 4.4 4.3 4.2 22.0 1.0 1.1 2.0 2.9 3.8 62 [27/16”] DT DD Hinge dimensions front of the cabinet. DT 21.0 1.4 1.3 1.3 1.3 1.3 28.0 3.7 3.6Reveal 3.5 3.4 3.3 21.0 1.0 1.0 1.6 2.4 3.3 [ and reveal calculation 0.4 Item No. 03[1/2”] PU Item No. PU 3.4 Pat Overlay Cranking Opening Angle Restrictions Cover cap 20.0 1.1..... 1.112-650 1.1 1.1 1.1 plate 26.0 2.9 2.8132.8 2.7 2.6 20.0 1.0 1.0 1.1 2.012-660 2.9 based on factory Over Self-Close 160° Screw-on...... Soft-Close 160° Screw-on. Overlay F072135751117 F072135500247setting. 50 150 Plastic, black Steel, nickel-plated *only achievable with C 19.0 0.9 0.9 0.9 0.9 0.9 2.2cup: 2.1zinc, 2.1nickel-plated 2.1 2.0 Subject to technical modifications without notice. 19.0 1.0 1.0 1.0 1.5 2.4 CC24.0 Hinge 13Soft-Close 160° Dowels......... 12-652 4 120° angle reduction F072135751540 500 Plastic, black 18.0 0.7 0.7 0.7 0.7 0.7 22.0 1.6 1.6 1.6 1.5 1.5 18.0 1.0 1.0 1.0 1.0 1.9 Hinge arm: zinc/steel, IMPORTANT To clip nickel-plated determine the 17.0 1.0 1.0 1.0 1.0 1.5 21.0 1.4 (DD) 1.3 1.3 1.3 1.3 17.0 1.0 1.0 1.0 1.0 1.5 Drilling Distance Drillin Item No. PU correct application Hinge arm cover cap 16.0 1.0 1.0 1.0 1.0 1.0 20.06 1.17 1.1 1.1 1.1 1.1 16.0 1.0 1.0 1.0 1.0 1.0 3 4 5 8 9 10 3 4 Pat Half overlay Cranking 9.5 F072135503228Grass strongly 150 Steel, nickel-plated 19.0 0.9 0.9 0.9 0.9 recommends a trial 25.0 0 0.9 22.0 mounting for all the gap between the
3
4
5
6
7
9.5
The minimum gap is
Base Plate Height (BPH)
Item No.
32.0 31.0 F028138520228 31.03 0.2*0.2*0.2*0.2* 4 5 6 7 Hinge cup: steel, nickel-plated 30.0 30.0 0.2 0.2 0.2*0.2*0.2* F045138458228 29.0 22.0 0 Hinge arm: steel, nickel-plated 29.0 0.2 0.2 0.2 0.2 0.2 0.2*0.2* with 120° angle 21.0 0 18.0 *only achievable 0 28.0 28.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 Tiomos_4_11:Layout 20.0 0 2 17.0 reduction 0 clip 2 26.0 Pattern Type Item No. Half Cranking 9.5 0.0 0.0 Description 26.0overlay 0.0 0.0 0.0 0.0 0.0 0.0 19.0 0 2 3 16.5 25.0 Soft-close F028138521228 25.0 0.0 0.0 0.0 Standard 0.0 0.0 0.0 Doors 0.0 0.0 160° Hinge cup: steel, nickel-plated 18.5 Hinge For3.5 16.045 0 2 3 24.0 24.0 0.0 0.0 Adjustment 0.0 0.0 0.0arm: 0.0 0.0 Base Plate Self-close Hinge steel,0.0 nickel-plated • 3-Dimensional With Suitable F045138459228 22.0 18.0 0 2 3 15.5 3.5 22.0 0.0 0.0 0.0 0.0 0.0Up0.0 0.0 (7/8”) • Accommodates Overlays To 0.0 22mm 17.5 3.5 15.0 0 2 3 21.0 21.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 • Soft-Close Or Self-Close Hinges Available 17.0 2 3 14 14.5 3.5 20.0 Pattern Type Item No. Inset 20.0 0.0Frame 0.0 0.0 0.0 0.0 Cabinets 0.0 0.0 • For Face Or 0.0 Frameless 16.5 3.5 14.0 2 3 18.0 Soft-close F028138522228 18.0 0.0 0.0 0.0 Adjustment 0.0 0.0 0.0With 0.0 Worm 0.0 • Convenient Depth Gear Hinge cup: steel, nickel-plated 16.0 2 3 13.545 3.5 16.0 16.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 90° • Zero Protrusion When Door Issteel, Opened Hinge arm:0.0 nickel-plated F045138460228 15.5 3.5 13.0 2 3 Self-close Reveal (R) • 10mm Cup Depth
Minimum Gaps
Page 12
9.5
Door overlay max.
[1/2”] [3 5/1612.6 ”] 84.5 min.
45
kness
86
Base Plate Height (BPH)
hickness
Chemicals Staples Screws
7
3
Adhesives Solvents Abrasives
6
min.10
Tools
5
39 [117/32”]
Molding, Carvings
4
3.5
TiomosDrilling 160F045138461228 Overlay Distance (DD) CC 3 angle 4 5 hinge 6 7 8 160° Wide
Overlay Cranking 03 32.00.2*0.2* Drilling Distance (DD)
hickness
Locks, Lock Systems
12.5
Screw-on Dowelled 3:10 PM Tiomos_4_11:Layout 12.01 34/8/11
14.5 3.5
Soft-Close 120° Screw-on...... 12-630 Overlay The minimum gap is the gap CC 9 10 between the closed door and the
Door Thickness
Grommets
Overlay Drilling Distance (DD) CC
Door overlay max.
Lighting
15.0 39 3 [117/32”]
Pattern Cranking 00 Drawings Show Tiomos With BaseType Plate, Height 02. Item No. DD DD Reveal Soft-close F028138519228 Minimum gaps 13 Hinge cup: steel, nickel-plated /32”] [ 10 45 5/8”] Self-Close 120° Screw-on...... 12-620 1/2”] 11 [ 15.5 [ 13Hinge arm: steel, nickel-plated Self-close F045138457228
DT
3
”]
Base Plate Height (BPH)
12.5 [1/2”]
Knobs
39 [117/32”]
62 [2 /
7 16
Full Overlay
Solid Surface
Closets s with f Furniture m! Hardware s Pulls ation &
ial
Reveal (R)
37 [115/32”] Tiomos Click-on 110
e Plate Height (BPH)
n
84.5 [3 5/16”]
Cranking 00
Laminate
120°
Door Thickness
Door Thickness
Tiomos Click-on 110 Tiomos Click-on 110° hinge for standard doors
•
110° hinge for standard doors
For face frame and frameless cabinets
Full overlay Cranking 00for Nexis Impresso Opening angle 110 • Combination drilling pattern
SNAP-ON HINGES
Inset
Nexis Impresso: Hinge cup: diecast, nickel-plated Hinge arm: steel, nickel-plated
Pattern 42/45
S
3-dimensional adjustment with suitable base plate Nexis : • Soft-close compatible 38 [1 1/2”] Nexis 45/48 S Hinge cup: steel, nickel-plated BPH • Shallow cup depth Hinge arm: steel, nickel-plated - Nexis Impresso 11.5 mm - Nexis 11 mm Cover caps for cranking 00 Kitchens Full overlay Cranking 00 Opening angle 110° Impresso • Accommodates overlays up to 20mm [25/32”] Steel, nickel-plated, Soft-close compatible Full overlay Full overlay Full overlay Half overlay Half overlay Half overlay Inset Inset Inset Nexis Impresso 65 Pattern Type No. Soft-close PU Pattern • Self-close or free-swing hinges available BlackItem plastic, compatible Type Nexis Impresso: [2 9/16”] • 3-dimensional adjustment with suitable base plate 42 request. Imprinting available upon special Self-close Doors • For face [13/16”] 21 [13/16”] 21 [13/16”] 21Hinge frame and frameless cabinets cup: diecast, nickel-plated 29 [1 1/8”] 29 [1 1/8”]138.622.50.0015 29 [1 1/8”] 38 [1 1/2”] 42/45 Self-close • Soft-close compatible X Hinge arm: steel, nickel-plated Self-close • Combination drilling pattern for Nexis Impresso Half overlay Cranking 08 Opening angle BPH 110 • Shallow cup depth •
Nexis Hinge 110°
Description
125
45
Nexis : Free-swing Kitchen - Nexis Pattern DT 11 mm 45/48 Self-close Nexis 146.622.35.0015 Hinge cup: steel, nickel-plated Accessories Impresso: • Accommodates overlays up to 20mm (25/32”) 48 Self-close R Hinge arm: steel, nickel-plated Hinge cup: diecast, nickel-plated 42/45 S • Self-close or free-swing hinges available 64 64 64 Hinge arm: steel, 64 64 64 65 nickel-plated 65 65 Cover caps for cranking 00 Item No. PU • For face frame and frameless cabinets [2 1/2”] [2 1/2”] [2 1/2”] Hinges [2 1/2”] [2 1/2”] [2 1/2”] Drawings show Nexis with a base plate, height 04. [2 9/16”] [2 9/1 Nexis : [2 9/16”] Nexis • Combination drilling pattern for Nexis Impresso Steel, nickel-plated, Soft-close compatible 514.300.21.0215 1000 45/48 Drilling distance (DD) *3 1
5
HingeOverlay cup: steel, nickel-plated Full
Black plastic, Soft-close compatible
6
514.000.22.9662 1000 Hinge arm: steel, nickel-plated
Imprinting available upon special request.
2 4 Full overlay 2 4
Cranking 00
Opening angle 110° Half overlay
DT Inset Cranking 15 Dowelled Opening angle 110° Screw-on Impresso
Impresso08 Cranking
S X
Drawer Slides
DT DT100 Opening angle
R Pattern Pattern Type Item No. PU Pattern Type Item No. Item No. Item No. PU Plywood Pattern Type Type Nexis Impresso: PU Pattern Melamine Nexis Impresso: Nexis Impresso: 138.322.73.0015 138.322.74.0015 42 Self-close Self-close Hinge cup: diecast, nickel-plated Hingeshow cup: Nexis diecast, Drawings Drawings withnickel-plated show a base Drawings Nexis plate,with height show a base Nexis 02. plate, with height a base138.622.50.0015 02. plate,cup: height 02. with Drawings Nexis Drawings a42 base Drawings Nexis plate, with height show a bas N0S Hinge diecast, nickel-plated 42/45 show Nexis Drawings show a base Drawings Nexis plate,with height show a base Nexis 02.Self-close plate, with height a base 02. plate,show height 02. with show 42/45 Self-closeDrawings 138.622.50.0815 42/45 Hinge arm: steel, nickel-plated Hinge arm: steel, nickel-plated 148.322.53.0015 148.322.54.0015 Self-close Hinge arm: steel, nickel-plated Drilling distance Drilling (DD) Veneer distance Drilling (DD)d Self-close Base Plate Height (BPH) distance Drilling Drilling (DD) distance Drilling (DD)distance (DD) Drilling distance Drilling (DD) distance Drilling (DD) distance (DD) 45 125 45250 Edgebanding 125 Nexis : 147.322.54.0015 Nexis : 147.322.53.0015 Free-swing Nexis : *3 4 5 6 *3 4 Free-swing 5 *3 6 4 *3 4 5 6 *3 7 4 5 *3 6 4 7 5 6 7 *3 4 5 6 *3 7 4 5 *3 6 4 7 5 6 7 45/48 S 45/48 146.622.35.0015 Self-close Hinge cup: steel, nickel-plated Hinge cup: steel, nickel-plated 45/48 Self-close 146.622.35.0815 Hinge cup: steel, nickel-plated 146.322.53.0015 146.322.54.0015 48 0 2 0 4 2 0 4 2 Self-close 48 Self-close 20 0 20 0 0 Hinge 12 arm: steel, nickel-plated 12 0 12 0 0Hinge arm: steel, nickel-plated Hinge arm: steel,20 nickel-plated Laminate 1 2 4 1 2 1 4 2 X= 38.5 + DT 19 19 0 19 0 0 11 11 0 11 0 0 Cover caps for cranking 00 Item No. PU Cover caps for crankingImpresso 08 Inset 2 0 Cranking 15 0 10 Opening angle 100° 2 and 154 2 4 2 4 18 0 18 2 18 0 2 10 2 10 0 2 0 2 *3 mm drilling distance for Nexis Steel, only nickel-plated, Soft-close compatible 514.300.21.0215 1000 Steel, nickel-plated, Soft-close compatible 17 0 17 2 0 17 2 0 2 9 0 9 2 0 9 Pattern 2 0 2 Type Item No. PU Pattern SolidType Black plastic, Soft-close compatible 514.000.22.9662 Surface Nexis Impresso:1000 Plate HeightBase (BPHP Black plastic, Soft-closeBase compatible 16 0 2 16 0 4 16 2 0 4 2 4 8 0 2 8 0 4 8 2 0 4 2 4 42 Self-close Imprinting available upon special request. Hinge cup: diecast, nickel-plated Imprinting available upon special request. 42/45 Self-close 138.604.51.1515 15 2 15 4 14 2 15 4 14 2 4 14 Hinge 7 arm: 2steel, nickel-plated 7 4 2 7 4 2 4 Self-close Half overlay Cranking 08 Opening angle 110° Impresso Screw-on Dowelled Cranking 15 45 Closets Opening angle reduction clip to 85° 125 14 2 4 14 2 14 4 2 4 6 2: 46 2 64 2 4 Nexis Free-swing Drilling distance (DD) Pattern Type Item No. PU Pattern Type Item No. No.X= 38.5 PU X= 38.5 +Item DT + DT X= 38.5 + DT Opening angle reduction to 85° Hinge nickel-plated Self-closing Screw-on. .Impresso: ....4 12-721 13 13 4 13 4 5 cup: steel, 4 5 4 5 45/48 4 Self-close 146.604.50.1515 Nexis Self-closing Screw-on. . .... 12-714 Self-closing Screw-on. . .... 12-724 48 Self-close *3 4 5 6 Hinge cup: diecast, nickel-plated 138.322.73.0815 138.322.74.0815 42 Self-close Hinge arm: steel, nickel-plated Furniture Self-closing Dowels......... 12-726 12 4 12 4 12 442/45 Self-close 138.622.50.0815 4 4 4 4 4 4 *3 mmdoors drilling distance *3 mm for drilling Nexis *3 distance mm only drilling for Prevents from bumping fronts or walls Self-closing Dowels......... 12-727 Self-closing Dowels......... 12-720 Hardware 0.6 0.6Screw-on....... 0.6 0.6 Hinge arm: steel, nickel-plated 148.322.53.0815 148.322.54.0815 Self-close Free16Swing 12-706 in corner installations. Black plastic Height (BPH) Height (BPH) Height (BPH) Base Plate HeightBase (BPH) Plate Height Base(BPH) Plate Height (BPH) 125 Base45Plate Base Plate Base Plate 250 Free Swing Dowels. .......... Cover caps for cranking 08 and 15 Item No. 12-722 PU 0.9 0.9Dowels. 0.9 0.9 Nexis : 147.322.53.0815 147.322.54.0815 Free-swing Free18Swing .......... 12-701 Pulls Free Swing Screw-On...... 12-712 45/48 146.622.35.0815 Self-close 514.300.22.0015 1000 Steel, nickel-plated, Soft-close compatible Hinge cup: steel, nickel-plated Minimum gaps Minimum gaps Minimum gaps Reveal 48 Reveal Reveal 19 1.1 1.1 1.1 1.1 & 146.322.53.0815 146.322.54.0815 Self-close Hinge arm: steel, nickel-plated Knobs 514.000.22.9662 100015 Cranking plastic, Soft-close compatible Full HalfDrilling Overlay Inset Drilling distance (DD) Black distance Drilling (DD) distance (DD) 20 1.4 1.4 1.4Overlay 1.4 Full overlay Half overlay Inset Cranking 00/08Cranking 00/08 Cranking 00/08 Cranking 15 Cran Reveal min. (R)
Reveal min. (R)
Cranking 15
Door overlay max.
Door overlay max.
Door overlay max.
Cranking 08
Door overlay max.
Door overlay max.
Cranking 00
Reveal min. (R)
4
Door overlay max.
2
Door thickness (DT)
Reveal min. (R)
0
4
17 Door overlay max.
16
0 0
15 10 14 13 12
2
10
2
11
4 Base Plate Height (BPH)
0
5 4
2 4 Side adjustment +1/-3 mm
2
4
Door thickness (DT)
Door thickness (DT)
Door thickness (DT)
Door thickness (DT)
Door thickness (DT)
Door thickness (DT)
2
Height 8 0HeightSide2 adjustment adjustment adjustment 7 2 4 ±2 mm ±2+1/-3 mm mm 6 2 4
4
4
Door thickness (DT)
0
9
Height adjustment 4 14 www.grassusa.com ±2 mm 4 2
2
2
Reveal min. (R)
0
Door overlay max.
18
Door thickness (DT)
Door thickness (DT)
Imprinting available upon special request. gapThe is the minimum gap The gap minimum is the gapgap is the gap Drilling distance Drilling (DD) dista distance Drilling (DD) Screw-on distance Drilling (DD)distance (DD) 22 1.9 1.9 1.9 The 1.9minimum *3 4 100° 5 6 *3 7 4 Impresso 5 *3 6 47 5 6 Drilling 7 Inset 15 Opening Dowelled [13/16”] 21 Cranking between the closed between door and the closed between door theangle and closed door and 29 [1 1/8”] Lighting 1/2”] 38 [1 Item No. PU *3 4 5 6 *3 4 5 Opening angle reduction clip to 85° *3 4 5 6 *3 7 4 5 *3 6 4 7 5 6 7 24 2.5 2.5 2.5 the 2.5front of the cabinet. 16 of 0.5the0.6 1.6162.60.53.60.6 16 1.6 0.5 2.6 0.6 3.6 1.6 2.6 3.6 10 the front of thethecabinet. front cabinet. www.grassusa.com Pattern Type Item No. PU Pattern Type Item No. PU BPHItem No. Opening angle reduction to 85° Nexis Impresso: 641.000.10.9862 1000 16 0.6 0.6 0.6 16 0.6 0.6 0.6 16 0.6 16 0.5 0.5 0.5 16 0.5 0.5 0.5 0.5 16 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 Reveal min. (R) n. (R) 18 0.5 1.2 2.2183.20.54.21.2 18 2.2 0.5 3.2 1.2 4.2 2.2 3.2 4.2 42 Self-close 138.304.73.1515 138.304.74.1515 Hinge cup: diecast, nickel-plated 18 0.9 0.9 0.9 18 0.9 0.9 0.9 18 18 1.0 1.0 1.0181.01.01.01.0 18 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Self-close 138.604.51.1515 1.5 2.5 193.50.54.51.5 19 2.5 0.5 3.5 1.5 4.5from 2.5 bumping 3.5 4.5 fronts Grommets 0.9 ere determined with an edge radius (of theHinge door)arm: of 1steel, mm! nickel-plated 19 0.542/45 Prevents doors or walls 148.304.53.1515 148.304.54.1515 Self-close 19 1.1 191.11.1 1.1 19 1.1 19 1.2 1.2 1.2191.21.21.21.2 19 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.1 1.1 Black 20 0.8 1.8 2.8203.80.84.81.8in corner 20 2.8 0.8 3.8installations. 1.8 4.8 2.8 4.8plastic d calculation of reveal with factory setting. 125 3.8 45 250 Nexis : Free-swing 147.304.53.1515 147.304.54.1515 642.4 3.4224.41.45.42.4 22 20 1.4 1.4 1.4 20 1.4 1.4 1.4 20 1.4 20 2.2 1.5 1.5 20 1.5 2.2 1.5 1.5 20 1.5 2.2 1.5 1.5 1.5 1.5 1.5 1.5 orrect application64 Grass strongly recommends 65 Locks, 22 1.4 3.4 1.4 4.4 2.4 5.4 3.4 4.4 5.4 Hinge cup: steel, nickel-plated [2 1/2”] [245/48 1/2”] Self-close 146.604.50.1515 [2 9/16”]146.304.55.1515 146.304.56.1515 Lock r all hinges and base plates. 22 1.9 1.9 22 48 4.7 3.7Self-close 2.8222.14.72.1 3.7 22 2.8 4.7 2.1 3.7 2.1 2.8 2.1 2.1 1.9 1.9221.91.9 1.9 22 Hinge arm: steel, nickel-plated Systems X 2.5 2.5 2.5242.52.5 2.5 24 24 2.5 Cup dimensions Cover caps for cranking 08 and 15 Item No. PU Reveal min. ( Reveal min. (R) Reveal min. (R)Reveal min. (R) Molding, Nexis Impresso Carvings DT 514.300.22.0015 1000 10 www.grassusa.com Dimensions in millimeters Steel, nickel-plated, Soft-close compatible Note Reveal Notedimensions Note Reveal weredimensions determined Revealwere with dimensions determined an edge were radius with determined (of anthe edge door) radius withofa1 R 514.000.22.9662 1000 Black plastic, Soft-close compatible Hinge dimensionsHinge and calculation dimensions Hinge ofand reveal dimensions calculation with factory and of calculation reveal setting. with of factory reveals Imprinting available upon special request. Tools IMPORTANT Togap IMPORTANT determine the IMPORTANT To correct determine application Tothe determine correct Grass application thestrongly correctGrass recommends application strongly G Minimum gap Minimum gap Minimum Drawings show Drawings show mounting plate, thickness 02. Drawings Drawings show plate, thickness 04. Drawings show Nexismounting with a baseplate, plate, thickness height 02. 02. Nexismounting amounting base plate, height 04. a trialshow mounting awith for trialall hinges a trial and for mounting base all hinges plates. for and allbase hinges plates. and base Drawings show Nexis with a base plate, height 02. Item No. PU Opening angle reduction clip to 85° Drilling distance (DD) Adhesives Drilling distance (DD) Opening angle reduction to 85° Drilling distance (DD)641.000.10.9862 1000 Adjustment Adjustment Adjustment Cup dimensions Cup dimensions Cup dimensi Solvents Nexis *3 4 5 6 *3 4 5 6 7 *3 4 5 6 7 Abrasives Nexis ImpressoNexis Impresso Nexis Impress Prevents doors from bumping fronts or walls 0 2 4 20 0 in corner installations. Black plastic 12 0 Chemicals 1 2 4 Staples 19 0 11 0 Screws
42 PU = packaging unit Base Depth Depth DepthPlate Height (BPH) Side adjustment adjustment adjustment adjustment Nexis Nexis Nexis Dimensions in millimeters, +3/-1 mm fractional +3/-1 mminch equivalents as noted. +1/-3 mm+3/-1 mm
X= 38.5 + DT
4 4
*3 mm drilling distance for Nexis only Base Plate Height (BPH)
87
5
6
*3
4
5
6
7
.5 2.5 3.5 4.5
18 1.0 1.0 1.0 1.0 1.0 Door thickness (DT)
.2 2.2 3.2 4.2
16 0.5 0.5 0.5 0.5 0.5
.8 2.8 3.8 4.8
.4 3.4 4.4 5.4
4
5
6
18 0.9 0.9 0.9 0.9
19 1.2 1.2 1.2 1.2 1.2 20 2.2 1.5 1.5 1.5 1.5
19 1.1 1.1 1.1 1.1
Kitchens
22 4.7 3.7 2.8 2.1 2.1
20 1.4 1.4 1.4 1.4
Reveal min. (R)
24 2.5 2.5 2.5 2.5 Reveal min. (R)
Description
Note
Reveal dimensions were determined with an edge radius (of the door) of 1 mm! Hinge dimensions and calculation of reveal with factory setting. • 3-dimensional IMPORTANT To determine the correct application Grass stronglyadjustment recommends with suitable a trial mounting for all hinges and base plates.compatible • Soft-close
Doors
Minimum gap
base plate
• Accommodates overlays up to 19mm (3/4”)
Kitchen Accessories
Hinges
22 1.9 1.9 1.9 1.9
Full overlay
Cup dimensions • For door thickness up to 19 mm
Full Overlay
Full overlay
22 [7/8”]
Drawer Slides
Depth adjustment +3/-1 mm
solution for wide angle application • Self-close hinges available • For face frame and frameless cabinets Half overlay • Combination drilling pattern for Nexis Impresso 30 [1 3/16”]
Nexis Imp Hinge cup Hinge arm
Nexis : Hinge cup Hinge arm
Cranking 00Impresso Nexis
Nexis
Cover caps for cranking 00
nick 110° hinge for Steel, stand
Melamine
Black plas
64 [2 1/2”]
Veneer
Edgebanding
64 [2 1/2”]
Base plates
Page 44
Technical Information
Page 7
Laminate
Imprinting
Half overlay
Drawings show Nexis with base plate, height 02 Drilling distance (DD)
Furniture Hardware
4
5
16
0
Door overlay max.
Lighting
2
0
2 2
4
2
14
4
13
4
Full Overlay
12 4 Full overlay
Adhesives Solvents Abrasives Chemicals Staples Screws
2
Inset
Nexis Hinge 170°
Cranking
Nexis Imp Hinge cup Hinge arm
Nexis : Hinge cup Hinge arm
Cover caps for cranking 08 and Full overlay Cranking 00 Steel, nick
plas NexisBlack Impress HingeImprinting cup: diec Hinge arm: stee *3 mm drilling distance for Opening Nexis onlyangle reduction Base Plate Height (BPH) clip to Base Plate Height (BPH) NexisOpening : a 71 Minimum gaps Reveal Hinge cup: stee 71 [2 13/16”] [2 13/16”] HingePrevents arm: steed Drilling distance (DD) Drilling distance (DD) in corner i Note The minimum gap is the gap between *3Cover 4 caps 5 6for cranking 00 *3 4 5 6 Reveal dimensions were determined the closed door and the front of the 1.0 1.8 2.6 16 1.9 1.9 1.9 1.9 16 0.5 Drawings show mounting Steel, nickel-pla with an edge radius (of the door) cabinet. plate, 18 1.3 2.1 2.9 3.7 thickness 02. 18 2.8 2.6 2.5 2.5 Black plastic, S of 1 mm! Imprinting availa Hinge dimensions and calculation 19 1.9 2.7 3.5 4.3 19 4.6 3.6 3.0 2.9 of reveal with factory setting. 20 2.4 3.2 4.0 4.8 20 6.5Half 5.5 overlay 4.5 3.5 Cranking 08
Cranking 00
x
10
Benefits
Drawings show Nexis with base plate, height 02
Nexis Impress Hinge cup: diec Drawings show Nexis Self-closing F/O Screw-on. Hinge arm: stee with base plate, height 08 and..........12-784 angle reduction clip.
Drawings show Nexis with base plate, height 02 IMPORTANT
www.grassusa.com
Drilling distance (DD) Drilling distance (DD)is Self-closingDrilling F/O distance Dowels..............12-749 • For door thicknesses of up to 26 mm. A trial application Nexis : (DD) To determine the correct 3 4 5 6 7 8 3 4 5 6 7 application 8 Hinge cup: stee Free-swing F/O Screw-on............12-786 recommended for doors thicker than 24 mm. Grass strongly 3 4 5 6 Hinge arm: stee recommends a Self-close trial mounting for 21 0 13 0 Half/O Screw-on. . ........12-788 • Zero protrusion at a 90° door opening angle in 00 cranking and 20
12 Minimum gap
0 with 00 mounting plate thickness. 0
17 16
0 0
2 2
2
11
2 13 4
4
0
9 8
0
0
10 x.
19
Adjustment 0 18
88
0
6
Door thickness (DT)
Tools
5
7 2 adjustment 4 • 3-dimensional with suitable base plate 6 2 compatible 4 • Soft-close • Accommodates overlays up to 19mm (3/4”) 5 4 • Shallow cup depth (11 mm) for Nexis and Nexis Impresso 4 4 • Zero protrusion when door opened 90° • Finger protection Half overlay • Self-close or free-swing hinges available Inset • For face frame and frameless cabinets • Combination drilling pattern for Nexis Impresso
Door thickness (DT)
Molding, Carvings
4
8 0 2 Description
0
15 14
9
0
17
Pulls & Knobs
*3
6
19 18
Drawings show Nexis with base plate, height 02 Drilling distance (DD)
Nexis Imp Hinge cup Hinge arm
Nexis : Hinge cup Hinge Nex arm
Door overlay max.
*3
Locks, Lock Systems
Half Overlay Screw-on..... 12-736
11
Surface
Grommets
Cranking
Self-closing Screw-on...... 12-734 Self-closing Dowels......... 12-748
Drawings show mounting plate, thickness 02.
Solid hout notice.
Closets
Cranking
Nexis Impresso • Alternative
0 0
2 2
2
all hinges and base plates. 0 1 2 2 4
4
Reveal min. (R)
8
SNAP-ON HINGES *3
16 0.6 0.6 0.6 0.6
Nexis Hinge 125°
Side ustment /-3 mm Plywood
6
Drilling distance (DD)
Drilling distance (DD)
7
.6 1.6 2.6 3.6
Door thickness (DT)
4
8
8
8 Cup dimensions
Inset
Reveal min. (R) Cranking 15
3 8 Nexis Impresso Base Plate Height (BPH)
Nexis Impress Hinge cup: diec Hinge arm: stee
•
For face frame and frameless cabinets
110° hinge for standard doors Inset TechnicalHINGES information SNAP-ON 29 [1 1/8”] 38 [1 1/2”] for Nexis Impresso and Nexis hinges BPH 3-dimensional adjustment with suitable base plate
Full overlay Cranking 00for Nexis Impresso Opening an • Combination drilling pattern
•
Pa
Nexis Impresso: Hinge cup: diecast, nickel-plated Hinge arm: steel, nickel-plated
42
3
Nexis : Soft-close compatible Nexis 45 Hinge cup: steel, nickel-plated • Shallow cup depth Hinge arm: steel, nickel-plated Impresso mm The- Nexis minimum gap is11.5 the gap 65 Nexis 11 mm Cover caps for cranking 00 [2 9/16”] Kitchens between the closed door and the00 Cup Full overlay Cranking Opening angle 110° Impresso • Accommodates overlays up to 20mm [25/32”] nickel-plated, Soft-close compati Full overlay Full overlay Full overlay Full Half overlay overlay Half overlay Half overlay HalfSteel, overlay Inset Inset front of the cabinet. Center X Drill Nexis Impresso Pattern Type Item No. Soft-close PU Pattern Typ • Self-close or free-swing hinges available Black plastic, compatible CC Nexis Impresso: Dista [13/16”] 21 [13/16”] 21 [13/16”] 21 [13/16”] [1 1/8”] [1 1 • 3-dimensional adjustment with suitable base21 plate 29 [1 1/8”] 29 [1 1/8”] 29 29Self-c Doors 42 Imprinting available upon special request. • For face frame andHinge frameless cabinets cup: diecast, nickel-plated DD DT 42/45 Self-close 138.622.50.0015 • Soft-close compatible Hinge arm: steel, nickel-plated Self-c • Combination drilling pattern for Nexis Impresso Half overlay Cranking 08 Opening an 13 The drilling distance is the R
80
1” 2 25.5
•
Minimum gap – drilling distance
Nexis Hinge 95°-Thick Door
Description
Minimum gap (factory setting)
2”] rilling stance DD
2 2
2
4 4
4
4
2 4 Cranking 00
plus 1/2 of the cup diameter. Impresso
Opening angle 110° Half overlay Pattern
Inset Cranking 15 Dowelled Opening angle 110° Screw-on Impresso
Cranking 08
Type
Item No.
PU
Pattern
Type
Item No.
Item No.
Opening 32”an 5
Plywood Pa PU 16”Typ Pattern Melamine
Pattern Type Item No. Base Plate Height (BPH) Nexis Impresso: PU Nexis Impresso: Nexis Impresso: Drawings show Nexis with Drawings a base plate, show height Nexis Drawings with 02. a Drawings base show plate, Nexis show height with Nexis 02. a base with aplate, base height plate, 02. height 02. Drawings show Nexisaplate, with Drawings aplate, base 0hp Drawings show Nexis with Drawings a base plate, show height Nexis Drawings with 02. a Drawings base show plate, Nexis show height with Nexis 02. a base with base height 138.322.73.0015 138.322.74.0015 42 Self-close 42 Self-c Hinge cup: diecast, nickel-plated Hinge cup: diecast, nickel-plated Hinge cup: diecast, nickel-plated 42 42/45 Self-close 138.622.50.0015 42/45 Self-close 138.622.50.0815 Drilling distance (DD) D Hinge Drilling arm: steel, nickel-plated Drilling distance (DD) Drilling distance (DD) Drilling Drilling distance distance (DD) (DD) (DD)Self-close distance Drilling distance (DD) Drilling distance distance (DD) Veneer (DD) Hinge arm: steel, nickel-plated 148.322.53.0015 148.322.54.0015 Hinge arm:Drilling steel, nickel-plated Self-c Nexis Impresso Drilling Patterns 45 250 125 47 6 5Edgebanding * 45 4 *3: 5 4*36 5 47 6 5 7 6 7Free-swing *3 4 5147.322.53.0015 6 7 Nexis *3 4:*3147.322.54.0015 5 4*36 5 125 7 6 Free-s Nexis X= 38.5: + *3 DT 4 5 6 7 *3 4 5 6 7 *3Nexis 45 45/48 Self-close 146.622.35.0015 0 2 4 0 Hinge cup: steel, nickel-plated Hinge20 cup: steel, nickel-plated 020 45/48 146.622.35.0815 Self-close 20 0 Hinge 20 cup: 0 048 012Self-close 12 steel, nickel-plated 12 0 12 146.322.54.0015 0 0 146.322.53.0015 48 45Self-c 45 and 48 Pattern 424 and Hinge arm: Hinge steel, nickel-plated *3 mmarm: drilling distance for Nexis Pattern only 1 steel, 20 nickel-plated Hinge 19 0 19 0 19 19 arm: 0 nickel-plated 0 11 steel, 0 11 0 11 11 0 Laminate 1
Cranking 00
Cranking 08
Cranking 15
Reveal min. (R)
0
Full overlay
Reveal min. (R)
”
Reveal min. (R)
45 125 • Accommodates overlays up to 19mm (3/4”) 20.5 16” Nexis : Kitchen Free-s 1 Pa distance between the edge of the • Minimal gap dimensions on thick doors 45/48 146.622.35.0015 Self-close Accessories 27 Hinge cup: steel, nickel-plated Nexis Impresso: 8” 4 21.5 48 Drawings show Nexis with a base plate, height 04. Self-c ” Nexis with32” door and the edge of the cuparm: hole. a•base height 02. Forplate, door thickness up to 30 mm (1 3/16”) Hinge steel, nickel-plated Hinge cup: diecast, nickel-plated 5 42 64 64 64 64 64 64 64 64 7 Drilling distance (DD) 65 32” g distance (DD) Hinge arm: steel, nickel-plated • Self-close or free-swing hinges 5 22.5 [2 available 1/2”] [2 1/2”] [2 1/2”] [2 1/2”] [2 1/2”] [2 1/2”] [2 1/2”] [2 1/2”] ” 8” [2 9/16”] Cover caps for cranking 00 PU Hinges 3 Drilling distance Item No. *3 4 5 6 Nexis : 4 5 615• 7For face frame and frameless cabinetsNexis 16” Steel, nickel-plated, Soft-close compatible 514.300.21.0215 1000 6 23.5 Full Overlay 45 16” 0 Hinge cup: steel, nickel-plated Door overlay • 0Combination drilling pattern for2 Nexis4 Impresso The cup center is the 1 Black plastic, Soft-close compatible 514.000.22.9662 1000 31 Cup center Hinge arm: steel, nickel-plated Drawer 4” 1 2 4 7 032” 24.5 distance of the cup drilling distance ” Imprinting available upon special request. Slides DT 9
(BPH) patterns Base Plate Height 2 4 2 ges accommodate cupCover drilling caps for cranking 0018 0 218 Inset 0 18 2 Item 18 No. 100 15 0 2PU 0 2 Opening 210Cover 0 cranking 10 2 Impresso 10 2 caps for 08 and015 0 2 Cranking angle 100° Impresso 45/48 hinges accommodate cup drilling patterns Impresso 42/45 hinge mm.Reveal Steel, 17 nickel-plated, compatible 0 Soft-close 2 17 0 2 17 514.300.21.0215 17 0 9 0 2 1000 0 2 2 9 0 2 9 Steel, 9 0nickel-plated, 0 2 Soft-close 2 Solid compati Pattern Type Item No. PU Surface Pattern Typ Base45mm Plate and Black 16 plastic, 0 Soft-close 2 compatible 416 of 0 both 45mm 2 16 4 48mm. 0514.000.22.9662 16 0Impresso: 4 2 4 82 0 2 1000 48 0 2 8 4 0 8 0 2 of both 2 442mm 4 and Nexis Door overlay max.
Door thickness (DT) Door thickness (DT) Door thickness (DT)
Door thickness (DT)
Door thickness (DT) Door thickness (DT) Door thickness (DT)
Door thickness (DT)
Door thickness (DT)
[2 9/16”]
Door overlay max.
Door overlay max.
Door overlay max.
Door overlay max.
[2 1/2”]
Door overlay max.
Door overlay max.
Door thickness (DT)
[2 1/2”]
Reveal min. Reveal min. (R) Rev Molding, Up to max. 28(R) mm Carvings door thickness Reveal dimensions Note determined Reveal Note dimensions with Note anwere edge Reveal determined radius dimens (of 514.300.22.0015 1000 Note 10 www.grassusa.com Dimensions inReveal millim Steel, nickel-plated, Soft-close compatible Up to max.were 30 mm Hinge dimensions and calculation Hinge dimensions of reveal and with Hinge calculation factory dimens Hinge sett o door thickness 514.000.22.9662 1000 Drilling distance (DD) Black plastic, Soft-close compatible Drilling distance (DD) IMPORTANT Toshow determine IMPORTANT the correct To determine application IMPORTANT IMPORTANT the Grass correct Tostrongly determine applica To det re Drawings Nexis with base plate, height 04 Tools Minimum gap Minimum gap Minimum Minimum gap gap Drawings show mounting plate, thickness 04. Imprinting available upon special request. Depth a trial mounting for allahinges trial mounting and basefor plates. aall trial hinges amount trial a *3 4 5 6 *3 4 5 6 adjustment Nexis Screw-on Drilling distance (DD) Item No. PU Opening angle +3/-1 mm19 0 reduction clip to 85° 11 0 Adhesives Screw-on Screw-on Adjustment Adjustment Cup di Adjustment Adjustment Cup dimensions *3 4 5 6 Opening angle reduction to 85° 641.000.10.9862 1000 Solvents 18 0 10 0 .1 0 Nexis Impresso Nexis I Abrasives 0 2 4 35 + 17 0 2 2 Prevents doors from bumping9fronts or 0walls 1 2 4 Chemicals in corner installations. Black plastic 16 0 2 8 0 2 Staples 2 4 15 2 4 7 2 4
12
4
10
Minimum gaps
Height adjustment www.grassusa.com ±2 mm
9 Base Plate Height (BPH)
5 4
2
4
Screws
9.5
6 Door overlay max.
14 Page 2 44 4 13 Page 47
Drawings showmounting Nexis with base plate, Item No.height 02 PU Drawings show plate, thickness 02.
Reveal min. (R)
Cover caps cranking 08 height and 15 Drawings show Nexisfor with base thickness plate, 02 Drawings show mounting plate, 02.
Door overlay max.
mation
Imprinting available upon special request.
Door overlay max.
Cranking 15 Black plastic, Soft-close compatible 42 Self-c Drilling distance 15 2 4 14 15(DD) 2 4 15 14 Hinge 15 2 cup: 4 214 nickel-plated 4 144 7 2diecast, 7 42/45 2 Self-close 4 7 138.604.51.1515 7 2 available 2 4 upon4 special request. Imprinting Hinge arm: steel, nickel-plated Self-c Cranking Impresso 14 08 2 *3 44 5 Opening 4 14 2 14 2 64 2 4 4 6 2 4 Screw-on 6 2 6 2 Dowelled 4 4 Closets 614 2angle 110° 45 Opening angle reduction clip to 85° 125 Nexis : X= 38.5 + DT X= 38 Free-s 13 16 0.6 4 0.6 0.6 0.6 13 4 13 13 Item 4 5No.4 4PU Pattern 5 Type 4 5 No. 5 4 4 No. Pattern Type 16 0.5 0.5 0.5 0.5 0.5 Item Item PU 45/48 Self-close Opening angle reduction to 85° 146.604.50.1515 Hinge cup: steel, nickel-plated Nexis Impresso: 48 Self-c 12 18 4 0.9 0.9Self-closing 12 4 12 4.Hinge 12 4arm: 4 steel, 4 4Self-close 4 4 4 4 4*3 Screw-on.Hinge ..... 12-790 Screw-on. .... 12-794 *Self-closing Screw-on...12-798* 0.9 0.9 18 Self-closing 1.0 1.0 1.0 1.0 1.0 mm drilling distance *3 Ne mm 138.322.73.0815 138.322.74.0815 42 nickel-plated Furniturefor cup: diecast, nickel-plated 42/45 Self-close 138.622.50.0815 Prevents doors from bumping fronts or Hardware Full1.2 overlay overlay Inset Dowels......... FF Screw-on. . .................... 12-802 Height (BPH) Height (BPH) Height Heigh (BPH) Base Plate Base Height Plate Height (BPH) (BPH) Base Plate Base Plate Base Plate Base Plate 1.1nickel-plated 1.1Half 1.1Base 1.1Plate Height (BPH) Base Plate Height (BPH) 19 Self-closing 1.2 1.2 1.2 1.2 Hinge12-804 arm:19steel, 148.322.53.0815 148.322.54.0815 Self-close in corner installations. Black250 plastic 45 125 and 15 Item PU 9/16”] 40 [1No. 3/16”] [7/8”]: 20 1.4 1.4 1.4 1.4 Cover caps for cranking 30 [1 08 23Nexis 20 2.2 1.5 1.5 1.5 1.5 147.322.53.0815 147.322.54.0815Pulls Free-swing Minimum gaps Minimum45/48 gaps Self-close Minimum Minimum gaps gaps Reveal 514.300.22.0015 Reveal1000 Reveal Reveal 146.622.35.0815 Steel, nickel-plated, Soft-close compatible Hinge cup:22steel, & 1.9nickel-plated 1.9 1.9 1.9 22 4.7 3.7 2.8 2.1 2.1 146.322.53.0815 146.322.54.0815 48Drilling Self-close Drilling distance (DD) Drilling distance (DD) Drilling distance distance (DD) (DD) Cranking 00/08 Cranking 00/08 Cranking Cranking Cranking 00/08 15 00/08 Knobs Hinge arm:24steel, nickel-plated 514.000.22.9662 1000 Black plastic, Soft-close compatible 2.5 2.5 2.5 2.5 The minimum gap is the gap The minimum gap is the Thegap minimum The minimum gap is the gapgap is the gap Drilling distanc distance (DD) Drilling distance (DD) Drilling Drilling distance dist(D *3 4 5 6 Imprinting 7 *3 available 4 5upon6 special 7 *3Drilling 4 *3 5 4 6 5 7 6 7 request. between the and theangle closed door between andbetween theImpresso closed the closed door and door and Reveal min. (R) InsetReveal min. (R) Cranking 15 closed doorbetween Opening 100° Screw-on Dowelled *3 4 5 *3 4 5 6 7 *3 4 5 6 7 *3 4 *3 5 4 65 Lighting 16 0.5 0.6 1.6 2.6 3.6 16 0.5 0.6 1.6 2.6 16 3.6 0.5 16 0.6 0.5 1.6 0.6 2.6 1.6 3.6 2.6 3.6 the front of the cabinet. the front Nexis of the cabinet. the front theoffront the cabinet. of the cabinet. Drilling Patterns Item No. PU Opening angle reduction clip to 85° 10 www.grassusa.com Note Reveal dimensions were determined with an edge radius (of the door) of 1 mm! 16 0.6 0.6 0.6 0 16 0.5 0.5 0.5 0.5 0.5 16 0.5 0.5 0.5 0.5 16 0.5 0.5 16 0.5 0.5 0.5 0.5 0.5 0.5 Pattern Type Item No. PU Pattern Type Item No. Item No. PU 18 0.5 1.2 2.2 3.2 4.2 18 0.5 1.2 2.2 3.2184.20.5181.20.52.21.23.22.24.23.2 4.2 Opening angle reduction to 85° Nexis 641.000.10.9862 1000 Hinge of[ Impresso: reveal with ] factory setting. Pattern 48 dimensions and calculation [ ] 18 0.9 0.9 0.9 0 18 1.0 1.0 1.0 1.0 1.0 18 1.0 1.0 1.0 1.0 18 1.0 1.0 18 1.0 1.0 1.0 1.0 1.0 1.0 Self-close 138.304.73.1515 138.304.74.1515 19 0.5 1.5 2.5 3.5 4.5 19 0.5 1.5 2.5 3.51942 4.50.5191.5 0.52.51.53.52.5 4.53.5 4.5 X Hinge cup: Grass diecast,strongly nickel-plated IMPORTANT To determine the correct application recommends Grommets 42/4542Self-close 138.604.51.1515 Pattern Pattern 45 Prevents doors from bumping fronts or walls 19 1.1 1.1 1.1 1 19 1.2 1.2 1.2 1.2 1.2 194.8 1.2 1.2 148.304.54.1515 1.2 1.2191.21.2191.21.21.21.21.21.2 Dowelled Hinge arm: steel, nickel-plated 20 0.8 1.8 2.8 3.8 4.8 20 0.8 1.8 2.8 3.8204.8 0.820 1.8 0.8 2.81.8 3.82.8 4.83.8 Self-close 148.304.53.1515 a trial mounting for all hinges and base plates. in corner installations. 125 Black 45 plastic 250 DD 20 1.4 1.4 1.4 1 Dowelled Dowelled 20 2.2 1.5 1.5 1.5 1.5 205.4 2.2 1.5 147.304.54.1515 1.5 1.5201.5 2.220 1.52.2 1.51.5 1.51.5 Nexis : 22 1.4 2.4 3.4 4.4 5.4 22 1.4 2.4 3.4 4.4225.4 1.422 2.41.4 3.42.4 4.43.4 5.44.4 Free-swing 147.304.53.1515 Locks, Cup dimensions 45/48 Self-close 146.604.50.1515 Hinge cup: steel, nickel-plated 22 1.9 1.9 1.9 1 22 4.7 3.7 2.8 2.1 2.1 22 4.7 3.7 2.8 2.1222.1 4.722 3.74.7 2.83.7 2.12.8 Lock 48 Self-close 146.304.55.1515 146.304.56.1515 Systems HingeImpresso arm: steel, nickel-plated Nexis CC R 24 2.5 2.5 2.5 2
Door thickness (DT)
Cranking 00/08 Drilling distance (DD) *3 4 5Half6overlay 7
PU = packaging unit 45Plate Height (BPH) Base 4 Depth Side Side Depth Depth Depth Height Height Height Side Side adjustment adjustment adjustmentNexis adjustment adjustment adjustment adjustment adjustment adjustment adjustment *Item 12-798 Only*Nexis adjustment 4 +3/-1 mm +3/-1 mminch equivalents +3/-1 mm +3/-1 mm X=in38.5+DT ±2 mm +1/-3 mm ±2 mm±2 mm +1/-3 mm +1/-3 mm +1/-3 mm Dimensions millimeters, fractional as noted.
11
Base Plate Height (BPH) *3 mm drilling distance for Nexis only
Reveal
89
o and Nexis Nexis hinges Impresso 110, Nexis 110 110° hinge for standard doors ance SNAP-ON Half overlay
e
•
HINGES Inset
Nexis
Nexis Hinge 95°
Inset
Minimum gap (factory setting)
[2 1/2”]
Doors
Nexis Impresso: Hinge cup: diecast, nickel-plated Hinge arm: steel, nickel-plated
3-dimensional adjustment with suitable base plate
Drilling Cupcompatible • Soft-close rlay Full overlay Full overlay Half overlay Half overlayHalf overlay Inset Inset Distance Center • Shallow cup depth DD64- Nexis CC Impresso 21 [13/16”] 21 [13/16”] 21 [13/16”] [1 1/8”] 29 [1 1/8”] 29 [1 1/8”]11.5 29 mm Kitchens [2 1/2”] - Nexis 11 mm Full overlay 37 Cranking [1 7/16”] [1 7/16”]00 • 1 13
e le.
For face frame and frameless cabinets
Nexis : Hinge cup: steel, nickel-plated Hinge arm: steel, nickel-plated
[2 9/16”]
Full overlay
•
Full overlay Cranking 00for Nexis Impresso Opening • Combination drilling pattern
38 [1 1/2”]
38 [1 1/2”] 38 [1 1/2”]
Cover caps for cranking 00 With 40mm Cup for Profile Doors OpeningBPH angle 110° BPH Impresso BPH X Accommodates overlays up to 20mm [25/32”] Steel, nickel-plated, Soft-close comp DD 3 20.5 Nexis Impresso8” 16” Pattern Type Item No. PU Pattern • Self-close or free-swing hinges available Description Black plastic, Soft-close compatible R Nexis Impresso: 5 27
CC
16
14 102
4 4www.grassusa.com
8
0
7 6
2 2
2
90
Tipmatic Page gaps 56 Minimum
4 4
Reveal min. (R)
Reveal min. (R)
[2 9/16”]
Door thickness (DT)
1 2
2
4 4 Base Plate Height (BPH)
Nexis
Most of the merchandise in this catalog is available in all Hardware Imagination locations. If X= 38.5 + DT your selection isn’t available at the store nearest PU = packaging unit 9 you, we’ll gladly order it from one of the other stores or through special order. Dimensions in millimeters, fractional inch equivalents as noted.
4
Page Technical 56 Page Information 56Technical Information Technical Page Information 7
Nexis
Door thickness (DT)
Door thickness (DT)
4
Reveal min. (R)
4
2 2
13 4 Base Plate Height (BPH) 5 4 SubjectSoft-close/UniSoft to technical UniSoft Soft-close/UniSoft Page 48 modifications Page 48 Basewithout plates Page notice. 48 Base plates Base plates Page 44 Tipmatic
Door thickness (DT)
0
15
Reveal min. (R)
Reveal min. (R)
Door thickness (DT)
Door thickness (DT)
Door thickness (DT)
±2+1/-3 mm 0 mm 2
Depth 2 4 12 Side Prevents doors from bumping fronts or walls adjustment adjustment 2 4 11 0 2 in+1/-3 cornermm installations. Black plastic Depth Depth Side Side +3/-1 mm Depth adjustment 10 adjustment0 adjustment 2 4 adjustment 2 Nexis 4 adjustment +3/-1 mm +3/-1 mm +3/-1 mm +1/-3 4 mm +1/-3 mm 9 0 2 4 0
Door overlay max.
Door overlay max.
±2 mm 17
0 2 PU Item No. 0 2 641.000.10.9862 1000 0 2 4
9.5
45
20 Height
Chemicals adjustment 19 0 Height Staples Height ±2 mm HeightSide Screws 0 ustment adjustment18 adjustment adjustment
Cranking 15
Door overlay max.
Cranking 08
22 Opening angle reduction clip 0 to 85°2 14 21 0 2 reduction to 85°13 Opening angle
Adhesives Solvents Abrasives
2 mm
Door overlay max.
Door overlay max.
Door thickness (DT) Door thickness (DT)
Door thickness (DT)
Door thickness (DT)
[2 1/2”]
Door overlay max.
Cranking 00
Door overlay max.
Door overlay max.
Door overlay max.
21.5 42 reque Imprinting available upon special Se • 4For face frameless cabinets cup: diecast, nickel-plated 32” frame andHinge • 3-dimensional adjustment with suitable base32” plate 42/45 Self-close 138.622.50.0015 64 64• Accommodates 64Drilling distance 3 64 64 64 7 Hinge arm: 65 steel, nickel-plated Se • Combination drilling pattern for Nexis Impresso 65 65 Half overlay Cranking 08 Opening door overlays up to 23mm (7/8”) 5 22.5 Up to max. 33 mm 1/2”] Kitchen[2 1/2”] [2 1/2”] [2 1/2”] [2 1/2”] [2 1/2”] 45 125 16” 8” [2 9/16”] [2 9/16”] DD Nexis : [2 9/16”] • Minimal gap dimensions on thick doors door thickness Fre Accessories Door overlay Overlay 1 15 45/48Up to 146.622.35.0015 max. 35 mm 6 23.5 Hinge cup: steel, nickel-plated center capacity for heavy profile doors Nexis • ExcellentCup weight X Self-close X Impresso:X 4” 16” 48 Se nce door thickness Hinge arm: steel, nickel-plated Hinge cup: diecast, nickel-plated 31 • For profile or frame doors up to 36 mm thick 9 7 Nexis32”with24.5 Drawings show base plate, height 02 show Nexis with base plate, height 02 Drawings show Nexis with base plate, height 04 Full Overlay HingesDrawings 32” Hinge arm: steel, nickel-plated • Special spring mechanism ensures excellent closing force even DT DT Cover caps -for cranking 00 DT Item No. PU 5 1” Drilling distance (DD) Nexis : with large doors 8 25.5 Drilling distance (DD) Drilling distance (DD) Nexis16” Steel, nickel-plated, Soft-close compatible 1000 R R 514.300.21.0215 R Hinge cup: steel, nickel-plated • Self-close 3 4 5 6 3 4 5 hinges 6 7 available 8 9 10 11 3 4 5 6 7 8 9Black 10 plastic, 11 Drawer Soft-close compatible 514.000.22.9662 1000 Hinge arm: steel, nickel-plated • For face frame and frameless cabinets Slides 0base 2with 4 plate, 0 height 02. 15 0 show how Nexis Drawings with show a23 base Drawings Nexis plate,with height show a base Nexis 02. plate, with height a base 02. plate, Drawings Nexis Drawings with show aspecial Drawings Nexis plate, height show a base Nexis 04. with height a base04. plate, height 04. Imprinting available upon request. Drawings show Nexis Drawings with show a base Drawings Nexis plate, with height show a base Nexis 02. plate, with height a base 02. plate, height 02. erns 1 2distance 4(DD)distance Inset Cranking 15 Opening 22 distance 2 00distance 14 Opening 2 08 distance Drilling Drilling (DD) Drilling (DD) Full(DD) overlay angle 110° Impresso Dowelled Half overlay Opening angle 110° Screw-on Impresso lling distance Drilling (DD) Drilling distance (DD)0 Cranking Drilling Drilling (DD) distance Drilling (DD) distance (DD)0 Cranking Plywood 2 4 21 0 2 13 0 2 *3 4 5 6 *3 4 5 *3 6 4 5 6 3 4 Melamine 5 6 *3 7 4 5 *3 6 47 5 6 7 *3 4 5 6 *3 7 4 5 *3 6Pattern 47 5 Type 6 7 Item No. PU Pattern Type Item No. Item No. Item No. PU Pattern Type Pattern 42 and 45 Nexis Impresso: PU Pattern Impresso: 20 0 2 Nexis Impresso: 4 12 0 2Nexis 4 2 0 0 4 2 0 4 2 4 20 0 20 0 0 Hinge 12 cup: diecast, 12 nickel-plated 0 12 0 0 138.322.73.0015 138.322.74.0015 42 Self-close 42 Hinge cup: diecast, nickel-plated Se Hinge Base (BPH) 138.622.50.0015 42/450 Self-close 0 2 4 11 2 138.622.50.0815 14 cup: 2 diecast, 4 1nickel-plated 2 14 42/45 2 4 Plate Height Veneer 19 Self-close 19 0 19 0 0 11 arm: steel, 11 0 11 0 0 Hinge arm: steel, nickel-plated Hinge nickel-plated 148.322.53.0015 148.322.54.0015 Self-close Hinge arm: steel, nickel-plated Se Edgebanding 18 0 2 4 10 hinges accommodate 0 2 cup 4drilling ommodate cup drilling patterns Impresso 42/45 patterns 45 4 2 125 2 4 2 4 45250 125 0 18 2 18 0 2 0 2 Nexis 10 0 10 2 10 0 2 0 2 Nexis : Nexis : : 147.322.53.0015 147.322.54.0015 Free-swing Fre 17 0 2 4 9 45mm. 0 45/482 Self-close 4 of both 42mm and 146.622.35.0015 Hinge cup: steel, nickel-plated Hinge cup: 146.622.35.0815 0 17 2 0 17 2 0 2 9 0steel, nickel-plated 9 2 0 9 2 0 2 Hinge cup: steel, nickel-plated X=4838.5 +Self-close DT 45/48 Self-close 146.322.53.0015 146.322.54.0015 48 Se Laminate 16 0 Hinge arm: steel, 2 4 8 0 2 4 Hinge arm: steel, nickel-plated Base Plate HeightBase (BPH) Plate Height Base(BPH) Plate Height (BPH)nickel-plated 2 16 0 4 16 2 0 4 2 4 8 0 28 0 4 82 0 4 2 4 Hinge arm: steel, nickel-plated 15 2 4 7 2 4 Item No. PU 2 15 4 14 2 15 Cover 4 14 2 caps for4 cranking 14 7 00 2 7 4 2 7 4 2 4 Cover caps for crankingImpresso 08 and 15 Inset Cranking 15 Opening angle 100° 14 2 4 6 2 compatible 4 Solid Steel, nickel-plated, Soft-close 514.300.21.0215 1000 4 14 2 14 4 2 4 6 2 46 2 64 2 4 Steel, nickel-plated, Soft-close comp Surface 13 4 Base Plate Height (BPH) 5compatible 4 Base Plate HeightX=(BPH) Pattern Type Item No. PU Pattern 38.5 + DT X= 38.5 + DT X= 38.5 + DT Black plastic, 514.000.22.9662 4 13 4 13 4 5 4 Soft-close 5 4 5 4 Nexis Impresso:1000 Black plastic, Soft-close compatible 42 Se Imprinting available upon special request. Hinge cup: diecast, 12 4 12 4 4 4 4 4 4 4 *3 mm drilling distance *3nickel-plated mm for drilling Nexis *3 distance mm only drilling for Nexis distance only for138.604.51.1515 Nexis only Imprinting available upon special reque 42/45 Self-close Closets Minimum gaps Reveal Hinge arm: steel, nickel-plated Se Half overlay Cranking 08 Opening angle 110°Height Impresso Screw-on Dowelled Height (BPH) Height (BPH) Base Plate Height Base (BPH) Plate Height Base(BPH) Plate Height (BPH) Base Plate Base Plate Base(BPH) Plate 45 Opening angle reduction Drilling distance (DD) Drilling distance (DD) clip to 85° 125 Nexis : Fre Pattern Type Item No. PU Pattern Type Item No. Item No. PU Note The minimum gap is the gap between 45/48 Opening Hinge cup: steel, nickel-plated m gaps Minimum gaps Minimum gaps Reveal Reveal 3 4 Reveal 5 6 8 10 3 4 Self-close 5 6 146.604.50.1515 8 10 angle reduction to 85° Nexis Impresso: Furniture 48 Se Self-closing Screw-on. . .... 12-750 Self-closing Screw-on. . .... 12-752 Self-closing Screw-on. . .... 12-754 Full overlay Half overlay Inset Reveal dimensions were determined the closed door and the front of the 138.322.73.0815 138.322.74.0815 42 Self-close Hinge arm: steel, nickel-plated Hardware cup: diecast, Drilling distance Drilling (DD) Hinge distance distance Cranking 00/08 Cranking Cranking 00/08 Cranking 15 Cranking Cranking 20Drilling 0.0(DD) 0.0 0.0nickel-plated 0.0(DD) 0.0 0.0 20 150.1 0.1 0.1150.1 Prevents 0.1 0.1 doors from bumping fronts 138.622.50.0815 42/4500/08 Self-close with an edge radius (of the door) cabinet. Hinge arm: steel, nickel-plated 148.322.53.0815 148.322.54.0815 Self-close m gapThe is the minimum gap The gap minimum is the gapgap is the gap Drilling distance Drilling (DD)0.2distance distance (DD) distance Drilling (DD)ofdistance Drilling (DD)distance (DD) in installations. Black250 plastic 0.0 22 0.2Drilling 0.2(DD) 0.2 0.2corner 0.2 *3 4 5 6 *3 7 4 522 *3 6 40.0 7 50.0 60.0Drilling 70.0 0.0 1cranking mm! 45 125 Cover caps for 08 and 15 Item No. PU Pulls e closed between door and the closed between door theand closed door and Nexis : 147.322.53.0815 147.322.54.0815 Free-swing Hinge dimensions and calculation *3 4 5 6 *3 4 5 *3 6 4 5 6 *3 4 5 6 *3 7 4 5 *3 6 4 7 5 6 7 & 24 0.0 0.0 0.0 0.0 0.0 0.0 24 0.3 0.3 0.3 0.3 0.3 0.3 16 of 0.5the0.6 1.6162.60.53.60.6 16 1.6 0.5 2.6 0.6 3.6 1.6 2.6 3.6 the cabinet. the front of thethecabinet. front cabinet. 45/48 Self-close 146.622.35.0815 514.300.22.0015 1000 Steel, nickel-plated, Soft-close compatible Hinge cup: steel, nickel-plated Knobs of reveal with factory 146.322.53.0815 Self-close 16 0.6 0.6160.60.6 0.6 0.6 16 0.5 0.5 0.5 0.5 0.5 0.5 setting. 0.5 0.5 0.6 48 0.4 16 0.40.6 0.40.6 0.40.6 0.40.6 0.4 146.322.54.0815 26 0.5 0.0 1.2 0.0 2.2 0.0 0.0 0.5 0.0 0.5 0.0 0.5160.50.50.50.5 16 26 0.6 18 0.5 1.2 2.2183.20.54.21.2Hinge 18 2.2 3.2 4.2 3.2 4.2 arm: steel, nickel-plated 514.000.22.9662 1000 Black plastic, Soft-close compatible Pattern 45 Pattern 48 18 0.9 0.9 0.9 18 0.9 0.9 0.9 18 0.9 0.9 0.9 0.9 0.9 0.9 18 1.0 1.0 1.0Imprinting 1.0 1.0 1.0 available 1.0 1.0upon special request. 28 0.6 0.6 0.6 0.6 0.6 0.6 28 0.5 0.0 1.5 0.0 2.5 0.0 3.5 0.0 1.0 0.0 1.0 0.0 1.0181.01.0 19 0.5 1.5 2.5193.50.54.51.5 19 2.5 3.5 4.5 4.5 641.01.0 18 Lighting Inset Cranking Opening 100° Screw-on Dowelled 1/2”] 19 1.1 1.1 1.1 1.1 19 1.2 19[2 1.21.2 1.21.2 19 1.2 1.2 1.2Impresso 1.2 1.2 1.2 1.2 1.2 1.1 1.1191.11.1 30 1.1 0.8 19 0.8 1.1 0.8 0.8 1.1 0.8 1.1 0.8 Dowelled 30 0.8 0.0 15 0.0 2.8 0.0 3.8 0.0 1.2 0.0 0.0 1.2angle 20 0.8Dowelled 1.8 2.8203.80.84.81.8 20 2.8 3.8 1.8 4.8 4.8 Item No. Opening angle reduction clip to 85° 37 [1 7/16”] [1 7/16”] 10 www.grassusa.com XPU 20 1.4 1.4201.41.4 1.4 1.4 1.4 1.4 1.4 20 201.52.21.51.5Type 20 1.5 2.2 1.5 1.5 1.5 1.5PU 1.4Pattern 32Type 2.1 20 1.1 1.4 1.1Item 1.1No. 1.1 1.4 1.1DD Item No. 32 1.4 0.0 2.4 0.0 3.4 0.0 4.4 0.0 2.2 0.0 1.5 0.0 1.5Pattern 22 1.4 2.4 3.4224.41.45.42.4 22 3.4 4.4 5.4 5.4 Item1.5 No.1.5 PU Opening angle reduction to 85° Nexis Impresso: 641.000.10.9862 1000 IMPORTANT 22 1.9 1.9221.91.9 1.9 22 1.9 1.9 1.9 1.9 1.9 1.9 22 4.7 3.7 2.8222.14.72.13.7 22 2.8 4.7 2.1 3.7 2.1 2.8 2.1 2.1 1.9 42 34 4.2 3.1 2.3 1.6 1.4 1.4 34 0.0 0.0 0.0 0.0 0.0 0.0 Grommets R Self-close 138.304.73.1515 138.304.74.1515 Hinge cup: diecast, nickel-plated To determine the correct 42/45 Self-close 138.604.51.1515 CC Prevents doors walls 24 from 2.5 bumping 2.5 2.524fronts 2.52.5 24 2.5 2.5 36or2.5 6.5 5.22.5 4.22.5 3.52.5 2.22.5 1.7148.304.54.1515 36 arm: 0.0 steel, 0.0 0.0 0.0 0.0 0.0 Hinge nickel-plated Self-close 148.304.53.1515 application Grass strongly in corner installations. Black 125min. 45 plastic 250 Locks, Reveal min. (R) Reveal min. (R) Reveal min. (R) Reveal min. (R) Reveal min. (R) Reveal (R) recommends a trial mounting for Nexis : Free-swing 147.304.53.1515 147.304.54.1515 Up to max. 33 mm Lock DDbase plates. all hinges and Self-close 146.604.50.1515 Hinge cup: steel, nickel-plated door Reveal min. (R) of 1 mm! gap 45/48 Overlay Systems Note Minimum Reveal Note dimensions Note Reveal weredimensions determined Revealwere with dimensions determined an edge were radius with (of anthe edge door) radius withofan 1(of mm! edge the door) ofthickness (of135 the mm! door) 48determined Self-close 146.304.55.1515 146.304.56.1515 Upradius to max. mm Hinge arm: steel, nickel-plated Hinge dimensionsHinge and calculation dimensions Hinge ofand reveal dimensions calculation with factory and of calculation reveal setting. with of factory revealsetting. with factory doorsetting. thickness Drawings show mounting plate, thickness 02. Drawings show mounting plate, thickness 02. Molding, IMPORTANT Togap IMPORTANT determine the IMPORTANT To correct determine application To the determine correct Grass application thestrongly correct Grass recommends application strongly Grass recommends strongly recommends Drawings show Nexis with base plate, height 02 Drawings show Nexis with base plate, height 02 Drawings show Nexis with base plate, height Minimum gap Minimum gap Minimum Adjustment Cup dimensions Drawings show mounting plate, thickness 04. 04 Cover caps for cranking 08 and 15 Item No. PUfor Carvings a trial mounting a for trialallmounting hinges a trial and formounting base all hinges plates. and allbase hinges plates. and base plates. Screw-on Screw-on Nexis Drilling distance (DD) Drilling distance (DD) Steel, nickel-plated, Soft-close compatible (DD)514.300.22.0015 1000 10Drilling distance www.grassusa.com Dimensions in m ent Adjustment Adjustment Cup dimensions Cup dimensions Cup dimensions +0.1 514.000.22.9662 1000 5 3 4 5 6 0 Black plastic, Soft-close compatible 3 4 5 6 7 8 9 10 11 3 4 5 6 7 8 9 10 11 3 4 Tools Nexis ImpressoNexis Impresso Nexis Imprinting 0 available upon special 15 request. 0 Impresso 2 4 23 0
Base Plate Height (BPH) Page 44 Page 44 PageReveal 7 Page 7
19
+20° angle corner cabinet hinge
SNAP-ON HINGES
3-dimensional adjustment base plate Soft-close compatible Minimal gap dimensions on of up to 30 mm Self-close hinges available
•
•
BPH
Nexis Hinge 95º/45° Angle Corner •
DT
Inset
•
R 37
[11/16”]
[1 7/16”]
BPH Description
[3 1/4”]
37 [1 7/16”]
[3 1/4”]
*3
4
Corner Angle 5
6
39 [1 9/16”]
16 0.1 0.1 0.1 0.1 18 0.2 0.2 0.2 0.2 [13/16”]
43
Door thickness (DT)
x
Drawing with base plate, height 02 2.9 2.6 2.5 30 3.8
• Well suited for variable Inset cabinet sides Reveal min. (R)
20 0.4 0.4 0.4 0.4
IMPORTANT
[7/8”]
Hinge dimensions with factory setting.
Door thickness (DT)
22 0.7 0.7 0.7 0.7 To determine the correct 24 1.0 1.0 1.0 1.0 application Grass strongly 1.4 1.4for1.4 recommends a 26 trial1.4 mounting 28 1.9 1.9 1.9 1.9 all hinges and base plates.
Note [11/16”]
[11/16”]
Drilling distance (DD)
Drawer Slides Impres
Nexis Impresso: Hinge cup: diecast, nickel-plated Hinge arm: diecast, nickel-plated Nexis : Hinge cup: steel, nickel-plated Note Hinge arm: diecast, nickel-plated
Pattern
Type
BPH R Reveal min. (R) 37 [1 7/16”]
Item N
42/45
Self-close
45/48
Veneer Self-close 146.705.35
Plywood Melamine
-
Edgebanding
x
Reveal dimensions were determined with an edge radius (of the door) of 1 mm! Nexis Self-closing Screw-on .............12-762 Hinge dimensions and calculation BPHImpresso Nexis Self-closing .............12-765 of reveal with factory setting. Cover caps
30 3.8 2.9 2.6 2.5 Drawings show Nexis withshow base plate, heightplate, 04 *3 mm drilling distance for Nexis only Drawings mounting thickness 04. DT
DT DT
Hinges
[1 1/16”] Opening angle 95°
+20° Corner Angle
Note Drilling distance (DD) Reveal dimensions were determined with an edge radius (of*3the 4door)5 6 of 1 mm! 16 0.1 0.1 0.1 0.1 Hinge dimensions18and0.2 calculation 0.2 0.2 0.2 of reveal with factory setting. 19 0.3 0.3 0.3 0.3
24 1.0 1.0 1.0 1.0 • Excellent R 37minimum gap 26 with 1.4 1.4door 1.4 1.4 requirements [1 7/16”] 28 1.9 1.9 1.9mm 1.9 thicknesses up to 30
Inset
Nexis
Inset
• For 45° corner cabinets and 19 0.3 0.3 0.3 0.3 applications20with a positive 0.4 0.4 0.4 0.4 angle. 22 0.7 0.7 0.7 0.7
DT
Kitchen Accessories
37
Drawing with base plate, height 00 Drilling distance (DD)
Benifits
Doors
• 3-dimensional adjustment with suitable base plate • Soft-close compatible • Minimal gap dimensions on door thickness of up to 30 mm R • Self-close hinges [1 7/16”]available
DT
DT R
Kitchens
Nexis Impresso
Steel, nickel-plated, without imprint
IMPORTANTDrawings show Nexis with base plate, height 08
Laminate
R Solid
Item No. Surface CC
514.300.22
514.000.22 Drilling distanceClosets (DD) To determine the correct Imprinting available upon special request. application Grass strongly 5 6 recommends a trial mounting for Furniture 0 all hinges and base plates. Hardware Black plastic, without imprint
Nexis Impresso 95/90°, Nexis 95/90 *3 4 5 Nexis 6 Nexis Impresso 95/90°, 95/90° Note 7 0 BPH [3 1/4”] DT Hinge dimensions with factory DT setting. Nexis / Impresso 95° Blind Corner 95° post hinge for blind corner cabinet 6 0 1 8 95° post hinge for blind corner cabinet R kness Base Plate Drawing with base plate, height 00 Drawing with base plate, height 04
R
Height (BPH)
37 [1 7/16”]
S
5 4
0 with base plate, height 00[13/16”] Drawing Overlay C3 2 4
(DD) 3
DT
4
R
0
2
Description
*3 mm drilling distance for Nexis only x = 38.5 with base plate, height 00 [1 7/16”]
2
15
2
37
x = 37.5 with base plate, height 02 [3 1/4”] x = 37.0 with base plate, height 04
2
4
• 3-dimensional adjustment with suitable • 3-dimensional adjustment with suitable base plate IMPORTANT BPHx = 36.5 with base plate, height 08 4 base 14 plate Overlay Drilling distance (DD) • Soft-close DD Tocompatible determine the correct • Soft-close compatible 1 4• Minimal gap dimensions on updrilling to 30distance mm for Nexis only *3ofmm *3 door 4 5thickness 6 Door overlay Note [13/16”]Post thickness Base Plateapplication Grass strongly • Minimal gap dimensions on S0.1 for recommends a trial mounting • Self-close hinges available 16 0.1 0.1 0.1 (S) Height (BPH) Hinge dimensions with factory setting. 37 all hingescabinets and base plates. door0 thickness of up to 30 mm corner 18 0.2 0.2 0.2 0.2 [1 14 7/16”] 19 • For blind
2
DT Drilling distance
0
•
2
17
•
Drilling distance (DD) C Self-close hinges available 19 0.3 0.3 0.3 0.3
2 Benefits
*3 4 5 6 Nexis Impresso Cup •dimensions Drawing with base plate, height 02 For Base blind corner cabinets Overlay 20 0.4 0.4 0.4 15 Nexis Impresso 4 Plate 5 16 Height (BPH) DD 0.4 16 0.1 0.1 0.1 0.1 R 37 • Used in special blind cabinet 22 corner 0.7 0.7 0.7 0.7 6 17 Gap (C) = 1mm Note 18 0.2 0.2 0.2 0.2 [1 7/16”]
•
Reveal Min. (R)
37 37 [1 7/16”] [1 7/16”]
Door overlay max.
1mm
R R
•
•
8
8
Pulls & Knobs
3-dimensional adjustment w base plate 14 Lighting Soft-close compatible Minimal gap dimensions on door thicknessGrommets of up to 30 Self-close hinges available For blind corner cabinets Locks,
Door thickness (DT)
Inset - Nexis
Door thickness (DT)
Door Door thickness (DT)thickness (DT)
Nexis Impresso IMPORTANT • Note Base Plate Heigh To Reveal determine the correct Lock dimensions were determined applications application Grass strongly Systems with an edge radius (of the door) recommends 1.0 1.0 with 1.0 1.0 of doors 1 mm! a trial mounting for Hinge24 setting. Minimum Reveal • Excellent minimum gap with thick Drawings show mounting plate, thickness 02. gaps 19dimensions 0.3requirements 0.3 0.3 factory 0.3 allHinge hinges and base plates. Molding, 26 1.4 1.4 1.4 1.4 Drawing with base plate, height 02 Note dimensions and calculation Drilling (DD) Drilling distance (DD) 20 0.4 distance 0.4 0.4 0.4 Carvings [7/8”] • Fully compatible with all standard mounting plates of reveal with factory setting. 28 1.9 1.9 1.9 1.9 Reveal dimensions were determined Note The minimum gap is the gap between Adjustment 22 *3 4 5 6 *3 0.7 4 0.75 0.76 0.7 Cup dimensions with an edge radius (of the door) 30 3.8 2.9 2.6 2.5 Reveal dimensions were determined the closed door and the front of the 24 1.0 Nexis of 1 mm! 16 0.1 0.1 0.1 0.1 16 0.5 0.5 1.0 0.5 1.0 0.51.0 Nexis Impresso with IMPORTANT an edge radius (of the door) cabinet. Tools Depth Hinge dimensions and calculation 26 1.4 1.4 1.4 1.4 DT 18 0.2 0.2 0.2 0.2 18 0.5 0.5 0.5 0.5 Reveal min. (R) To1determine the correct adjustment of mm! [7/8”] Nexis of reveal with factory setting.Nexis 28 1.9 1.9 1.9 1.9 +3/-1 mm application Grass and strongly Hinge dimensions calculation 19 0.3 0.3 0.3 0.3 19 0.5 0.5 0.5 0.5 37 R Adhesives recommends a trial mounting 30 3.8 2.9 2.6 2.5 Note of reveal with factory setting. for [1 7/16”] 20 0.4 0.4 Solvents 0.4 0.4 20 0.0 0.0 0.0 0.5 all hinges and base plates. IMPORTANT Abrasives Hinge dimensions with factory setting. Drawings show mounting plate, thickness 04. DT Drawing 22 95° 0.7 0.7 0.7 0.7 with base plate, height 04 22 0.5 0.5 0.5 0.5 Reveal To determine the correct 90° Blind Corner Inset Opening angle Impres min. (R) 90° Blind Corner Inset Opening angle 95° Impresso Screw-on Dowelled *3 mm drilling distance forNexis Nexis only Chemicals application Grass strongly 24 1.0 1.0 1.0 1.0 24 0.5 0.5 0.5 0.5 Depth HeightR Side 37 Nexis Impresso: recommends mounting Pattern Type Staples Item No Impresso:adjustment Pattern Typeadjustment Item 0.5 No. 0.5 0.7 Page 48 Item for Base plates adjustment PU Soft-close/UniSoft Pattern Type Item No.a trial No. PU26 [1Nexis 7/16”] 1.4 1.4 Screws 1.4 1.4 26 Note 0.5 Hinge cup: diecast, nickel-plated all hinges and base plates. +3/-1 mmHinge dimensions with factory setting. Hinge cup: diecast, nickel-plated +1/-3 mm Overlay ±2 mm ce. 350.9 Tipmatic IMPORTANT Page 56 42/45 Self-close 28 1.9 1.9 1.9 1.9 28 0.5 0.5 0.5 Hinge arm: diecast, nickel-plated Drawing with base plate, 42/45 Self-close 45 Self-close 148.405.11.9615 148.405.12.9615 Hingeheight arm:04diecast, nickel-plated BPH To determine the correct *3 mm drilling distance for Nexis only 2.6 2.5 30 3.8 2.9 125 125 30 0.5 0.5 1.1 1.1 Nexis : Nexis : application Grass strongly 45/48 Self-close 146.705.35 45/48 Self-close 146.705.35.9615 48 Hinge cup: steel, nickel-plated Self-close 146.405.53.9615 146.405.54.9615 20 www.grassusa.com Hinge cup: steel, nickel-plated Post thickness Base Plate Drilling distance Door overlay recommends trial mounting for Overlay Hinge arm: adiecast, nickel-plated Self-closing Screw-on. ..... 12-774 Hinge arm: diecast, nickel-plated Soft-closing Screw-on..... 12-770 Reveal m Minimum gap S (S) Height (BPH) (DD) all hinges and base plates. Self-closing Dowel........... 12-7670 BPH 19 3 14 Subject to technical modifications without notice. 35 C 17 2 4 15 Adjustment Cup dimensions IMPORTANT Post thickness Base Plate Drilling distance Door overlay Overlay 15 4 5 16 Item No. Cover caps Nexis Impresso DD To determine the correct Item No. Cover caps S PU (S) Height (BPH) (DD) 6 17 application Grass strongly Gap (C) = 1mm 514.300.22. Note Steel, nickel-plated, Soft-close compatible
Inset - Impresso
91
SNAP-ON HINGES
•
Nexis Impresso
Nexis Impresso Nexis Nexis Impresso 110,110, Nexis 110 110 for standard doors Half overlay Inset 110° 110° hingehinge for standard doors 29 [1 1/8”]
• • •
Nexis Impresso – 110°
Kitchens
38 [1 1/2”] BPH
Shallow cup depth - Nexis Impresso 11.5 mm - Nexis 11 mm Accommodates overlays up t Self-close or free-swing hing For face frame and frameles Combination drilling pattern
Full overlay
Half
3-dimensional adjustment with suitable base plate • 3-dimensional adjustment with suitable base plate 21 [13/16”] • Soft-close compatible Nexis • Soft-close compatible • 3-dimensional • Shallow adjustment cup depth with suitable base plate • Shallow -cup depth • Soft-close compatible Nexis Impresso 11.5 mm 65 - Nexis Impresso [2 9/16”] • Shallow depth - cup Nexis 1111.5 mmmm - NexisImpresso 11 mm 11.5 mm Full overlay Cranking 00 Opening angle 110° Impresso - Nexis • Accommodates overlays up to X 20mm [25/32”] 64 • Accommodates overlays up up to 20mm [25/32”] Nexis Impresso • Accommodates overlays to 20mm (25/32”) Pattern Type Item No. [2 1/2”] • Self-close or free-swing hinges available Nexis Impresso Nexis Impresso: • Self-closeDTororfree-swing hinges available • Self-close free-swing hinges available • For face frame and frameless cabinets Hinge cup: diecast, nickel-plated 42/45 Self-close 138.622.50.0 • For faceframe frameand andframeless frameless cabinets • For face cabinets R • Combination drilling pattern Hinge arm: steel, nickel-plated for Nexis Impresso •• Combination drilling pattern for Nexis Impresso Combination drilling pattern for Nexis Impresso •
Description
Kitchen Accessories
Hinges
Drawer Slides Drawings show Nexis with a base plate, height 02.
Drilling distance (DD)
Drilling distance (DD) Plywood Melamine
Veneer
*3
4
5
6
12
0
11
0
*3
7 Nexis
Nexis : Hinge cup: steel, nickel-plated Drawings show mounting plate, 02. Hinge arm: steel,thickness nickel-plated
Drawings show Nexis with a base plate, height 04.
Nexis 0
4
5
2
1 2 Cranking 00
6 4
4
Door overlay max.
Self-close 146.622.35.0
Nexis Impresso Cranking110° 08 hinge for sta
Cover caps for cranking 00 Drawings show Nexis with a base plate, height 02.Item No. Dr Steel, nickel-plated, Soft-close compatible 514.300.21.02 Drilling distance (DD) Black plastic, Soft-close compatible 514.000.22.96 5 request. 6 7 Imprinting available*3 upon4special
2 4 Edgebanding 10 0 2 Full overlay Cranking 00 Opening angle 110° Impresso Half overlay 2Cranking 00 Full 9overlay 0 Opening angle 110° Impresso Base Plate Height (BPH) PU Pattern Type Item No. 8 0 2 4 Laminate Nexis Impresso: Pattern Type Item No. PU Pattern 7 2 4Nexis Impresso: Hinge cup: diecast, nickel-plated 42/45 Self-close 138.622.50.001542 Hinge cup:Hinge diecast, arm:nickel-plated steel, nickel-plated 42/45 Self-close 138.622.50.0015 6 2 4 Solid Hinge arm: steel, nickel-plated 125 X= 38.5 + DT Nexis : 4 Surface 5 45 125 12-850 Nexis : Self-closing....................... 45/48 Self-close 146.622.35.0015 Hinge cup: steel, nickel-plated 4 4 *3 mmSelf-close drilling distance for Nexis only 45/48 146.622.35.0015 Hinge cup:Hinge steel,arm: nickel-plated steel, nickel-plated 48 Height (BPH) Base Plate Hinge arm: steel, nickel-plated Closets Cover caps for cranking 00 Item No. PU Inset Cover caps for cranking Item No. PU Reveal 00 Steel, nickel-plated, Soft-close compatible 514.300.21.0215 1000 Steel, nickel-plated, Soft-close compatible 514.300.21.0215 1000 Furniture istance (DD) Cranking 00/08 Black plastic, Soft-close compatible Cranking 15 514.000.22.9662 1000 Hardware Black plastic, Soft-close compatible 514.000.22.9662 1000 Drilling distance (DD) Drilling distance (DD) Imprinting available upon special request. 5 6 7
Nexis Impresso 125, Nexis 125 125° hingeImprinting for standard doors available upon special request.
45/48
20 0Dowelled Screw-on Cranking 08 Opening angle 110° Screw-on Dowelled 19 0
Impresso
Pattern Type Item No. Item No. Type PU Item No. Pattern 18 No. 0 Item No.2 TypeNexis Impresso: Item PU 138.322.73.0015 138.322.74.0015 42 Self-close Hinge cup: diecast, nickel-plated 17 0 138.322.74.0015 2 42/45 Self-close 138.622.50.0 138.322.73.0015 Self-close 148.322.53.0015 148.322.54.0015 Self-close Hinge arm: steel, 16 nickel-plated 0 2 4 45 250 148.322.53.0015 148.322.54.0015 Self-close 147.322.53.0015 147.322.54.0015 Free-swing 250 Nexis : Self-closing....................... 12-854 15 2 4 14 147.322.53.0015 147.322.54.0015 Free-swing 45/48 Self-close 146.622.35.0 cup: steel, nickel-plated 146.322.54.0015 48 Hinge Self-close 14 146.322.53.0015 2 4 146.322.53.0015 146.322.54.0015 Self-close Hinge arm: steel, nickel-plated
13 Cranking 1512
N
4
4
Door overlay max.
64 [2 1/2”]
Door overlay max.
Doors
Reveal min. (R)
2.
•
Opening angle 100°
Impresso
BasePattern Plate Height (BPH) Type Item No. Nexis Impresso: Hinge cup:Minimum diecast, nickel-plated gaps 42/45 Self-close 138.604.51.15 *3 4 5 Impresso 6 *3 Cranking 4 5 608 7 Hinge arm: steel, nickel-plated Pulls 1.6 2.6 3.6 Half overlay Opening angle 110° Screw-on Dowelled Drilling distance (DD) & Half overlay Cranking 08 0.5 0.5 0.5Opening angle 110° 16 0.6 0.6 Impresso Screw-on Dowelled 0.6 0.6 16 0.5 0.5 Nexis : The minimum gap is the gap 2.2 3.2 Knobs 4.2 Pattern Type Item No. PU Pattern Type Item No. Item No.*3 4 PU5 6 7 45/48 Self-close 146.604.50.1 between the closed door steel, nickel-plated Nexis Pattern Type 18 0.9 0.9Item 0.9No. 0.9 Pattern TypeHinge cup: Item No. Itemand No. PU 18 1.0 1.0 1.0Impresso: 1.0 1.0 2.5 3.5 4.5 • 3-dimensional adjustment withPU suitable base 42 plate 138.322.73.0815 138.322.74.0815 Self-close 16 0.5 0.6 1.6 2.6 3.6 Nexis Impresso: the front of the cabinet. Hinge arm: steel, nickel-plated Hinge cup: diecast, nickel-plated 42/45 19 1.1Self-close 1.1 1.1 138.622.50.0815 1.1 19 1.2 1.2diecast, 1.2 1.2 1.2 138.322.73.0815 138.322.74.0815 42 Self-close 2.8 3.8 4.8 Lighting • Soft-close compatible Hinge cup: 18 0.5 1.2 2.2 3.2 4.2 Hinge arm:nickel-plated steel, nickel-plated Self-close 138.622.50.0815 42/45 •Self-close 3-dimensional adjustment with suitable base plate 148.322.53.0815 148.322.54.0815 20 1.4 1.4 1.4 1.4 20 2.2 1.5steel, 1.5 nickel-plated 1.5 1.5 45 250 No. 125 Hinge arm: 3.4 4.4 5.4 148.322.53.0815 148.322.54.0815 Self-close Cover caps[3/4”] for cranking 08 and 15 • Accommodates overlays up to 19mm 19250 0.5 1.5 Item 2.5 3.5 4.5 Nexis : • Soft-close compatible125 45 147.322.53.0815 147.322.54.0815 Free-swing 22 1.9 1.9 1.9 1.9 22 4.7: 3.7 2.8 2.1 2.1 Nexis 45/48 146.622.35.0815 Self-close 147.322.53.0815 147.322.54.0815 Free-swing • For door thickness up tooverlays 19 mm up to 19mm Hinge cup: steel, nickel-plated Steel, nickel-plated, Soft-close compatible 20 0.8 1.8 514.300.22.0 • Accommodates (3/4”) 2.8 3.8 4.80 overlay Cranking 146.322.53.0815 Full 146.322.54.0815 48 Grommets Self-close 45/48 Self-close Hinge cup:Hinge steel,arm: nickel-plated 24 2.5 146.622.35.0815 2.5 2.5 2.5 steel, nickel-plated • Alternative 146.322.53.0815 146.322.54.0815 22 1.4 2.4 514.000.22.9 48mm Self-close • For door thickness to 19 solution for wideup angle application Black plastic, Soft-close compatible 3.4 4.4 5.4 Hinge arm: steel, nickel-plated Reveal (R) angle application Reveal min. (R) • Self-close Imprinting available upon special request. • Alternativeavailable solution formin. wide Nexis Impr Nexis15 Impresso Inset Cranking Opening anglehinges 100° Impresso Screw-on Dowelled Locks, •with Self-close hinges Hinge cup: d Inset 15 dimensionsOpening angle Impresso Screw-on Dowelled • For100° Lock face frame frameless cabinets NoteCrankingReveal were determined an edgeand radius (of theavailable door) of 1 mm! Item No. Opening angle reduction clip to 85° Full Overlay Systems •reveal For face frame andItem frameless cabinets Pattern Type No. PU Pattern Type Item No. Item No. PUHinge arm: Full overlay Halfofoverlay Hinge with factory setting. • Combination drilling pattern forPUNexis Impresso Nexisdimensions Impresso: and calculation Opening angle reduction to 85°Item No. 641.000.10.9 Pattern Type Item No. Pattern Type Item No. PU • Combination pattern for Nexis Nexis : Nexis Impresso: 42 Impresso Self-close 138.304.73.1515 138.304.74.1515 IMPORTANT To determine the correct application Grass stronglydrilling recommends Minimum gap Hinge cup: diecast, nickel-plated [7/8”] 22 Molding, 42/45 Self-close 138.604.51.1515 [1 3/16”] 42 Self-close 138.304.73.1515 138.304.74.1515 30 trial arm: mounting for all hinges and base plates. Hinge cup: s Hinge cup:aHinge diecast, nickel-plated Prevents doors from bumping fronts or walls steel, nickel-plated Self-close 148.304.53.1515 148.304.54.1515 Carvings 42/45 Self-close 138.604.51.1515 Hinge arm: steel, nickel-plated installations. Black plastic 125 Self-close 45 in corner 250Hinge arm: 148.304.53.1515 148.304.54.1515 Nexis : Free-swing 147.304.53.1515 147.304.54.1515 Cup dimensions 125 45 250 Minimu Nexis : Hinge cup: steel, nickel-plated 45/48 Self-close 146.604.50.1515 Free-swing 147.304.53.1515 147.304.54.1515 Cover caps for cranking 00 Nexis Impresso 48 Self-close 146.304.55.1515 146.304.56.1515 45/48 Tools Self-close 146.604.50.1515 Hinge cup:Hinge steel,arm: nickel-plated steel, nickel-plated Steel, nicke 48 Self-close 146.304.55.1515 146.304.56.1515 Hinge arm: steel, nickel-plated Nexis Adjustment Black plasti Adhesives Cover caps for cranking 08 and 15 Item No. PU Imprinting av 64 Cover caps for64 cranking 08 and 15 Solvents Item No. PU 514.300.22.0015 1000 [2 1/2”] Steel, nickel-plated, Soft-close compatible 10 www.grassusa.com [2 1/2”] Abrasives 514.300.22.0015 1000 Half overlay Cranking 0 Steel, nickel-plated, Soft-close compatible 514.000.22.9662 1000 Black compatible Full overlay Cranking 00plastic, Soft-close Opening angle 125° Impresso Screw-on Dowelled Depth 514.000.22.9662 1000 de Chemicals Black plastic, Soft-close compatible Imprinting available upon special request. adjustment ment Staples Nexis Impr Imprinting available upon special request.Nexis Pattern Type Item No. PU Pattern Type Item No. Item No. PU Nexis Impresso: +3/-1 mm 3 mm Screws Self-closing....................... 12-840 Hinge cup: d Item No. PU Opening angle reduction clip to 85° 42 Self-close 138.329.73.0015 138.329.74.0015 Item No. PU Opening angle reduction Hinge clip tocup: 85°diecast, nickel-plated Height Side Hinge arm: Opening angle reduction to 85°42/45 Self-close 138.629.50.0015 641.000.10.9862 1000 Hinge arm: steel, nickel-plated Self-close 148.329.31.0015 adjustment 148.329.32.0015 adjustment Opening angle reduction to 85° 641.000.10.9862 1000 Nexis : 125 4502. 250 Drawings show mounting plate, thickness ±2 mm +1/-3 mm Nexis Prevents : doors from bumping fronts or walls Hinge cup: s Free-swing Prevents frominstallations. bumping fronts or plastic walls 45/48 Self-close 146.629.35.0015 in corner Black Hingedoors cup: steel, nickel-plated Hinge arm: 48 Self-close 146.329.55.0015 146.329.56.0015 in corner installations. Black02 plastic Drawings show Nexis with base Drawings show Nexis with base plate, height 02 Hinge arm: plate, steel, height nickel-plated Drilling distance (DD) Drilling distance (DD)Page 44 Inset Cranking 1 Base plates Item No. PU Cover caps for cranking 00 *3 4 5 6 *3 4 5 6 PU = packaging unit Technical Information Page 7 Steel, nickel-plated, Soft-close compatible 514.300.21.0215 1000 PU = packaging unit Nexis Impr 9 0 2 19 0 Black plastic, Soft-close compatible 514.000.22.9662 1000 Soft-close/UniSoft Page 48 Hinge cup:Bad
Description
Door thickness (DT)
Door thickness (DT)
Door thickness (DT)
Nexis Impresso - 125° Angle
Cranking 00
92
Corner Angle
Inset
SNAP-ON HINGES
38 [1 1/2”]
52 [2 1/16”]
BPH
Nexis Impresso 170, Nexis 170 170° wide-angle hinge 64
BPH
Nexis Im
Impresso – 170° Angle
• • • •
DT
•
Drawings show Nexis with baseNexis plate, Impresso height 04 Drilling distance (DD)
Full overlay *3
4
7
5
•
Full Overlay
6
2
•
•
4
•
37 [1 7/16”] 3-dimensional adjustment with suitable base plate Soft-close compatible DD • 3-dimensional adjustment with suitable Accommodates overlays up to 19mm [3/4”] base plate R • Soft-close compatible Shallow cup depth (11 mm) for Nexis and Nexis Impresso CC • Accommodates overlays up to 19mm (3/4”) Zero protrusion opened • Shallow cup when depthdoor (11 mm) for90° Nexis and DT Nexis Impresso Drawings Finger protection • Zero protrusion when door opened 90°show Nexis with base plate, height 18 Self-close oroverlay free-swing hinges available • Finger Halfprotection Inset Full overlay • Self-close free-swing available For face frameorand framelesshinges cabinets • For face frame and frameless cabinets Combination drilling pattern for Nexis Impresso
Kitchens
Description
Doors
Kitchen Accessories
Cranking 00 Hinges Nexis Impresso 125/-45°, Nexis 125 Nexis Impresso: • Combination drilling pattern for Nexis Impresso -45° angle corner cabinet hinge, Hinge halfDrawer cup:overla diecast, n Slides
Hinge arm: steel, nick
71 [2 13/16”]
71 [2Nexis 13/16”] Full overlay
Cranking 00
A trial application is recommended for doors Opening angle 170° thicker Impresso than 24 mm.
Cranking 00
Pattern
Type
Item No.
Nexis Impresso: Hinge cup: diecast, nickel-plated 42/45 138.765.65.0015 Base Platearm: Height (BPH)nickel-plated*3 mm drillingSelf-close distance for Nexis only Hinge diecast, Nexis : Hinge cup: diecast, nickel-plated Hinge arm: diecast, nickel-plated
PU
Type
42
Self-close
50
45
•
Item No.
Self-close
base plate
Cover caps for cranking 00 Veneerangle c • For 45° negative Dowelled Steel, Edgebanding nickel-plated, S
Screw-on
Pattern
•
Nexis : Plywood Hinge Melamine cup: steel, nick 3-dimensional adjustmen Hinge arm: steel, nick
Self-close hinges availab
Item No.
138.765.73.0015 138.765.74.0015 Nexis Impresso Half overlay 148.765.53.0015 148.765.54.0015
PU Black plastic, Soft-clo Imprinting available up Laminate
Cranking 08 50
Solid Free-swing 147.765.53.0015 Self-closing....................... 12-870 Nexis Surface Impresso: Drilling distance (DD) 48 Self-close 146.765.53.0015 146.765.54.0015 Hinge cup: diecast, n Notethickness 02. Hinge arm: steel, nick Drawings show mounting plate, *3 4 5 6 Reveal dimensions were determined Closets Nexis : Drawings show Nexis with base plate, height 02 Drawings Nexis with base plate, height16020.1 0.1 0.1 0.1 Drawings show Nexis withshow an edge radius (of the door) Hinge steel, nick Half overlay Cranking 08 Opening angle 170° Impresso Screw-on Dowelled 18 0.2 0.2 0.2 0.2 of 1 mm! with base plate, height 08cup: and angle Hinge Furniture arm: steel, nick Hinge dimensions and calculation Drilling distance (DD) Drilling distance (DD) 19 0.3 0.3 0.3 0.3 Pattern Type Item No. PU Pattern Type Item No. Item No. PU Nexis Hardware Drilling distance (DD) of reveal with factory setting. Nexis Impresso: 20 0.4 0.4 0.4 138.765.74.0815 0.4 Inset Cranking 15 3 4 5 6 7 8 3 4 5 6 742 8 Self-close 138.765.73.0815 Hinge cup: diecast, nickel-plated 42/45 Self-close 138.765.65.0815 3 4 5 6 Pulls 22 0.7 0.7 0.7 0.7 Hinge arm: diecast, 21 0 nickel-plated 13 0 Self-close 148.765.53.0815 148.765.54.0815 50 45 50 Nexis &Impresso: 24 1.0 1.0 1.0 1.0 0 Opening 8 -45° Angle Corner 147.765.53.0815 angle 125° Knobs Imp Nexis : Free-swing Hinge cup: diecast, n IMPORTANT 20 0 12 146.765.35.0815 0 45/48 Self-close 26 1.4 1.4 1.4 1.4 Hinge cup: diecast, nickel-plated 1 8 Pattern HingeType arm: steel, nick Nexis Impresso: 146.765.54.0815 Item 48 Self-close 146.765.53.0815 To determine the • 3-dimensio 19 0 arm: diecast, 2 nickel-plated 11 0 correct 2 28 1.9 1.9 1.9 Hinge Hinge cup:1.9 diecast, nickel-plated Nexis Lighting : base plate application Grass strongly 2 8 42/45 Self-close 30 3.8 2.6 2.5 Hinge arm:2.9 diecast, nickel-plated • 18 3-Dimensional With Suitable Base Plate 0 Adjustment 2 10 0 a trial 2mounting for Hinge cup: steel, nick recommends Zero protrusion Angle reduction clip to 120° Special applications Forsteel, 45°nick ne 3 8 •arm: • Soft-Close Compatible Hinge Nexis : all hinges and base plates. 17 0 2 13 4 9 0 Mitered 2 Corner 4 45/48 Self-close 146.729 • Self-close 3/8” Lip Application Grommets Hinge cup: steel, nickel-plated • Minimal Gap Dimensions On Door Thickness Of Up 30 mm Reveal min. (R) Base Plate Hei Cover caps for cranking 08 and 15 Hinge arm: diecast, nickel-plated Base4plate 08 Base plate 08 16 0 2 4 8 0 2
Reveal
Self-close 146.765.35.0015
Nexis Impresso 125/-45°, Ne -45° angle corner cabinet hinge, ha Negative Hinge Angle Corner Door thickness (DT)
Nexis / Impresso 125º/-45°
Description
Hinge cranking 08
13 12
4 4
4
Base Plate Height (BPH) -45°
Item No.
6 5
9.5 (3/8")
2
2 2
Side 9.5 (3/8") adjustmentDD 12.5 (1/2") +1/-3 mm Drilling
The minimum gap is the gap between the closed door and the front of the Opening angle reduction to 120°. cabinet. Prevents doors from bumping with the (DD) Drilling distance
3
Depth adjustment +3/-1 mm
4
5
6
8
Nexis Impresso
Steel, Locks, nickel-plated, S
Nexis Impresso Lock X= 38.5 + DT Black plastic, Soft-clo Systems
Imprinting available up
Drilling distance 3 mm Molding, Opening angle reduction clip to 85° Carvings for both Nexis Impresso and Item N Base Plate Height (BPH) Opening angle reduct 514.300 Steel, nickel-plated, without imprint possible. Nexis hinges X + 27 1 [1 1/16”]3 ( /8")
DD 22.5 (7/8")
X
Reveal
distance (DD)
10
16 0.7 0.7 0.7 0.7 0.7 0.7
18 cabinet side in inset applications *3 4 and 5 6 Nexiscorner . .................................. 12-768 12 0 mitered applications. 19
Cup dimensions
Cover caps
19 (3/4")
DT
Hinge cranking 08 19 (3/4")
4
19 (3/4")
641.000.09.0062 Height Nexis PU 250Impresso pieces Minimum gaps adjustment Black plastic ±2 mm
4 4
46 (113/16")
Door overlay max.
14
19 (3/4")
7
37 (17/16")
Door overlay max.
• For 45° Angle Corner Cabinets
• 15 Self-Close Hinges Adjustment 2 Half 4 Available overlay
Reveal min. (R)
45/48
0.7 0.7 0.7 0.7 0.7 0.7
Nexis
Black plastic, without imprint Imprinting available upon special request.
Prevents doors from b Tools 514.000 in corner installations Nexis
Adhesives
Solvents Drilling distance (D
Drawings show Nexis with base plate, height 02
Abrasives
Note 3 4 5 6 Chemicals OverlayReveal dimensions were determined -45° Angle Corner Opening angle 125 Staples 16 0.0 0.0 0.0 0.0 0 10 www.grassusa.com with an edge radius (of the door) Screws Zero protrusion for Nexis application with inset drawers. Impresso: Pattern 18nickel-plated 0.0 0.0 0.0 0.0 0 of 1 mm! With 00 cranking and 00 height of base plate Hinge cup: diecast, 42/45
Se
the and door is flush with the cabinet at 90°. Hinge arm: diecast, Drawings Show Hinge 02. dimensions calculation 0.7 0.7 0.7 0.7Nexis 0.7 With 0.7 Base Plate, Height 19nickel-plated 0.0 0.0 0.0 0.0 0 Nexis : of reveal with factory setting. Subject to technical modifications without notice. 25 PU = packaging unit 0.0 0.0 20 0.7 0.7 0.7 0.7 0.7x =0.7 20 0.0 0.0 Se0 10 0 2 45/48 55.0 with base plate, height 00
Nexis Impress........................ 12-769 11 0
rlay max.
7
2
6 5
2
2 4 4 4
57.0 with base plate, height 02 22 0.7 0.7 0.7 0.7 0.7x =0.7
4
Page 48
Base plates
Page 56
x = 59.0 with base plate, Page 44height 04
23 0.7 0.7 0.7 0.7 0.7 0.7
14
24 0.7 0.7 0.7 0.7 0.7 0.7
Machinery Technical Information
IMPORTANT
Hinge cup: steel, nickel-plated Hinge arm: diecast, 22nickel-plated 0.0 0.0 Page 76 Page 7
s (R)
Soft-close/UniSoft Tipmatic
0
8
s (DT)
9
0.0 0.0 0
23 0.0 0.0 0.0 0.0 0
930.5 1 24 0.0 0.0 0.0
37
25°
Nexis 21 PCC SNAP-ON Pie-cut corner hinge with full cup recess HINGES
Nexis 21 PCC 2 3-dimensional adjustment with suitable Pie-cut cupplate recess ge Application Hinge Application Hinge Applicationcorner hinge with full base Nexis PCC Pie Cut Corner •
19
•CC For
CC
Doors 90 °
DD=4
Kitchen DD = Drilling distance Accessories Drawings with base plate, height 00
37
Cup center (CC) = 10 Cup center (CC) = 10
19
eight wing with 04 Slides base Drawing plate, height with 04 base plate, height 04 Pie-cut corner hinge
Opening angle 110°
Screw-on
Adjustment In The Hinge Pattern Arm Plywood Adjustment in the hinge arm Nexis 1. Side : Adjustment ±2 mm Melamine 1. Side adjustment ±2 mm Hinge cup: steel, nickel-plated ±2 mm 42 2.Hinge Depth Adjustment Nexis 170 Hinge Nexis 170 HingeNexis 170 2. Depth adjustment ±2 mmhinge Hinge arm: diecast, nickel-plated Pie-cut corner Opening angle 110° Veneer 4. Door Thickness 14 To 24 mm, Factory 4. Door thickness 14 to 24 mm, factory setting 1918 mm 19 Edgebanding Pattern Setting 19 mm Nexis PCC Hinge Nexis PCC Hinge Nexis PCC Hinge Adjustment via base plate Nexis : Adjustment Via Base Plate 3. Height adjustment Laminate Hinge cup: steel, nickel-plated Cover caps±2 mm 42 3. Height Adjustment ±2 mm Hinge arm: diecast, nickel-plated Steel, nickel-plated, without imprint Solid Surface DD = Drilling distance
3
Type
Furniture Hardware
Black plastic, without allimprint hinges and base plates.
Adjustment
DT Adjustment
Imprinting available upon special request
DT
DD=4
°
Important Note
DT
90
Pulls & Knobs
Adjustment for
19
door base thickness 14 - 24 mm Use the Nexis 21hinge PCC hinge plates: Adjustment in the arm with the following Factory setting is 19 mm 1. Side adjustment ±2 mm Important Note±2 mm Lighting 2. Depth adjustment 4. Door thickness 14 to 24 mm, factory setting 19 mm With door thickness from Use the Nexis base 21 PCC hinge with the following base plates: plate Grommets Adjustment via (page 44) Height 14mm - 17mm: 314.493.71.0215 Side 3. Height adjustment ±2 mm adjustment adjustment 318.493.71.0215 (page 44) ±2 mm ±2 mm Locks,DT 37
Lock Systems
Dowelled
Item No.
Item No.
PU
70139-10
70140-10
125
70139-06 Screw-on
70140-06 Dowelled
25
Item No. 1
Self-close Self-close
Item No.
70139-10
PU
125 70140-10 Item No. PU 25 70140-06 1000 514.300.22.0015
70139-06
2 514.000.22.9662 1000
Black plastic, without imprint IMPORTANT X IMPORTANT X request Imprinting available upon special
X
2
Self-close
To determine the correct Drawings with base plate, height 00 determine the correct Self-closing Screw-on. .....To12-776 application Grass strongly Cover caps Hinge Application for door thickness 19mm, factory setting. application Grass recommends strongly a trial mounting for Closets Steel, nickel-plated, without imprint Drilling distance range 3 mm - 6 mm recommends a trial for base plates. allmounting hinges and
X
H
Type
Self-close
DT
X
H
DT
25°
H
DT
H BP
H BP
Cup center (CC) = 10
Drawer
Description
H BP
BPH
H
H
H
25°
BPH Adjustment
H
BP
BP
BP
for door thickness 19mm, factory setting. Drilling distance range 3 mm - 6 mm
Hinges
Designed for folding doors in corner cabinets door thicknesses Max. 24 mm, factory CC 1 setting 19 mm door thickness with • 3-dimensional adjustment with suitable 3.5 mm drilling distance base plate • 3-dimensional adjustment with suitable base plate • Self-close hinges available 170inHinge • Designed• for folding doors in cornerNexis cabinets Designed for folding doors corner cabinets • Used in conjunction with Nexis 170 hinges • For door thicknesses Max. 24 mm, factory • For door thicknesses Max. 24 mm, factory setting 19 mm door Adjustment for • Shallow cup depth of 10.8 mm Wide-angle hinge door thickness 14 -setting 24 mm 19 mm door thickness with thickness with 3.5 mm drilling distance Factory setting is 19 mm Nexis 21 PCC Hinge 3.5 mm drilling distance • Self-close hinges available Folding door hinge • Self-close hinges available • Used in conjunction with Nexis 170 hinges • Used in conjunction with Nexis 170 hinges • Shallow cup depth of 10.8 mm • Shallow cup depth of 10.8 mm •
18
CC
4
4
1 2
3
Item No.
PU
514.300.22.0015 1000
1
514.000.22.9662 1000 Note Note Note Reveal dimensions were Reveal determined dimensionsReveal were dimensions determined were determined with an edge radius (of with theandoor) edge radius with(ofanthe edge door) radius (of the door) Cup dimensions of 1 mm! Nexis 170of 1 mm! of 1 mm! Hinge Hinge dimensions andHinge calculation dimensionsHinge and calculation dimensions and calculation of reveal with factory of setting. reveal with factory of reveal setting. with factory setting. Wide-angle hinge Nexis 21 PCC Hinge IMPORTANT
10.8
Kitchens CC
IMPORTANT
IMPORTANT Folding door hinge To determine the correct To determine the Tocorrect determine the correct application strongly application Grass application strongly Grass strongly 3 Grass With door thickness from recommends a trialrecommends mounting fora trial recommends mountingafor trial mounting for 18mm 24mm: 314.493.71.0015 (page 44) Depth . all hinges and mounting all hinges plates. and mounting all hingesplates. and mounting plates. adjustment 318.493.71.0015 (page 44) ±2 mm
2
2 With door thickness from 3 IMPORTANT 4 BPH 4 24mm: 314.493.71.0015 44) 14mm - 17mm: 314.493.71.0215 (page 44) Door thickness (DT) Door thickness 1618mm 17 -(DT) 18 Door 19thickness 20 16 2117 (DT) 2218 19 16(page 20 1721 1822 19 120 21 22 BPH To determine the correct Molding, 318.493.71.0015 44) 318.493.71.0215 application (page 44) Grass CarvingsBPH Distance (X) Distance 25 (X)24 22Distance 21 20 (X) 25 1824 1722 21225(page 20 2418 2217 21 20 18 17 strongly X X X 19 18 recommends a trial mounting for Base Platebase Height (BPH Base ) Plate (BPH 02Plate ) Height 04 00(BPH 00 Drawings with base plate, Drawings heightwith 04 base Drawings plate, height with 04 plate, height 0404HeightBase 1 ) 02 04 00 02 1 SubjectDD to technical 39 = Drillingmodifications distance without notice.all hinges and base plates. Tools
With door thickness from
Drawings with base plate, height 00
ustments Adjustments for door thickness 19mm, factory setting. Adjustment Adhesives Solvents Abrasives
Cup dimensions Cup dimensions CupCup dimensions dimensions
Drilling distance range 3 mm - 6 mm
DD = Drilling distance
10.8
Drawings with base plate, height 00 Chemicals Staples for door thickness 19mm, factory setting. Screws Drilling distance range 3 mm - 6 mm
Adjustment
Soft-close/UniSoft Page 48 Depth Height Side Height Side Side Height Side Tipmatic Page 56 adjustment adjustment adjustment adjustment adjustment adjustment adjustment adjustment +3/-1mm mm ±2 mm +1/-3±2 mm mm +1/-3 mm +1/-3 ±2 mm ±2 mm 38 www.grassusa.com
94
Adjustment in the hinge arm Soft-close/UniSoft 1. Side adjustment ±2 mm Tipmatic 2. Depth adjustment ±2 mm
Page 48 Page 56
Base plates Depth adjustment +3/-1 mm Base plates
Depth Depth adjustment adjustment 42 +3/-1 ±2 mmmm
Page 44
PU = packaging unit
Machinery Technical Information
Page 76 Page 7 PU = packaging unit .
Dimensions in millimeters, fractional inch equivalents as noted. Page 44
Machinery
Page 76
Technical Information
Page 7
SNAP-ON HINGES
Overlay BPH
Nexis Impresso
Nexis Impresso 110, Nexis 110 hinge for standard 95°110° - Thick Doordoors Kitchens
FullDT Overlay
Inset
Cranking 00 CC DD
• Doors Soft-close
Overlay Drawings show Nexis with base plate, height 02
Nexis Impresso
Drilling distance (DD)
Self-closing....................... 12-842 *3 4 5 6 18 17
Drawer Slides
0
15
0 0
14 13 Door overlay max.
Self-closing....................... 12-844
0
16
2
2
Plywood Melamine
• Optimal gap requirements withNexis door thicknesses of up to 30 mm
Veneer
x = 43.5 with base plate, height 02 4
4
Benefits
x = 42.5 with base plate, height 00
2 2
12 11
3-dimension c • Shallow cup - Nexis Impr Kitchen - Nexis 11 m Accessories • Accommoda • Self-close o Hinges • For face fram • Combination •
Cranking 15
x = 44.5 with base plate, height 04
14
Edgebanding
Designed for thick and profile doors Nexis Impresso 125/-24°,• Full Nexis 125/-24° overlay Cranking 00 Opening angle 110° • Ideal for pocket and flap doors Laminate Pattern Ty -24° angle corner cabinet hinge Nexis Impresso:
4 4
Base Plate Height (BPH)
Door thickness 30 mm max. Minimum gaps Drawings show mounting plate, thickness 02. distance Drawings show mounting plate, thickness 04. Drilling (DD) The minimum gap is the gap between the closed door and the front of the cabinet.
Hinge cup: diecast, nickel-plated Hinge arm: steel, nickel-plated
*3 mm drilling distance Nexis only28 mm max. Doorfor thickness
*3
4
5
6
•
• •
Nexis : suitable 3-dimensional adjustment with Hinge cup: steel, nickel-plated base plate Hinge arm: steel, nickel-plated For 24° negative angle corner cabinets Note Cover caps for cranking Self-close hinges available00
Nexis Impresso
20 2.4 3.2 4.0 4.8
Door thickness (DT)
application Grass strongly recommends a trial mounting for Nexis Impresso: all hinges and base plates. Hinge cup: diecast, nickel-plated Hinge arm: steel, nickel-plated
-24° Angle Corner Cabinet Hinge
Opening angle 125°
BPH
Cover caps
Subject to technical modifications without notice.
Pattern Lighting
42/45
Ty
Self-
3-dimension base plate Grommets 45/48 • For 24° Selfneg • Self-close h •
Locks,
Inset
Nexis Impresso: Hinge cup: diecast, nickel-plated Hinge arm: diecast, nickel-plated
Side adjustment Dowels......... 12-763 +1/-3 mm
Nexis : Hinge cup: steel, nickel-plated Hinge arm: steel, nickel-plated
Nexis
• 3-dimensional adjustment with suitable base plate • For 24° negative angle corner cabinets Minimum gap • Self-close hinges available -24° Angle Corner Overlay
Height adjustment Self-closing ±2 mm
Self-
Black plastic, Soft-close compatible Nexis Impresso 125/-24°, Nex Imprinting available upon special request. IMPORTANT Pulls & To determine the correct Half overlay Cranking 08 cabinet Opening angle 110° -24° angle corner hinge Knobs
Nexis / Impresso 125/-24° Negative Angle
125/-24°
45/48 Closets
Hardware
19 1.9 2.7 3.5 4.3
Adjustment
Self-
Furniture Hinge dimensions with Steel, factorynickel-plated, setting. Soft-close compatible
16 0.5 1.0 1.8 2.6 18 1.3 2.1 2.9 3.7
Description
42/45 Solid Surface
Nexis : Hinge cup: steel, nickel-plated Depth Hinge arm: diecast, nickel-plated DT adjustment +3/-1 mm
CC
DD
Cranking 15
OpeningLock angle 100° Systems
Impresso Nexis Impresso Pattern Screw Ty Cup dimensions Nexis Impresso: Molding, Pattern Type Item No. cup: diecast, PU Pattern Type Carvings Item N Hinge nickel-plated Nexis Impresso 42/45 SelfHinge arm: steel, nickel-plated 42/45 Self-close 45 Self-close 148.429.2 Nexis : 125 Tools 45/48 SelfHinge cup: steel, nickel-plated 45/48 Self-close 146.729.35.0115 48 Self-close 146.429.2 Hinge arm: steel, nickel-plated Adhesives Solvents Cover caps for cranking 08 and 15 Abrasives Nexis Nexis Steel, nickel-plated, Soft-close compatible
Chemicals
Black plastic, Soft-close compatibleStaples
Imprinting available upon special request. Screws
-24° Angle Corner Opening angle 125° Item No. PU Opening angle reduction clip to 85° 514.300.22.0015 1000 Steel, nickel-plated, without imprint Pattern Ty Opening angle reduction to 85° Overlay 514.000.22.9662 1000 Black plastic, without imprint 42/45 SelfNexis Impresso: Imprinting available uponbase special request. Drawings Show Withplate, Base Plate, Prevents doors from bumping fronts or walls Drawings show NexisNexis with height 02 Height 02. Hinge cup: diecast, nickel-plated in corner installations. Black plastic 45/48 SelfHinge arm: diecast, nickel-plated 31 Drilling distance (DD) Nexis : *3 4 5 6 Hinge cup: steel, nickel-plated 18 0 Hinge arm: diecast, nickel-plated
95
SNAP-ON HINGES
Nexis Mounting Plates Kitchens
Fixing distance 37 mm, line boring 32 mm
Doors
Kitchen Accessories
Hinges
Drawer Slides Plywood Melamine
Veneer
Edgebanding
DESCRIPTION
PANEL THICKNESS
ORDER NO.
PHOTO
Steel plate for wood screw fixing, fixing distance 37 mm, line boring 32 mm Height adjustment: ±2 mm Side adjustment: +1/-3 mm Depth adjustment: +3/-1 mm All adjustment options are independent of one another.
height adjustment
00 02
12-900 12-902
Laminate
Solid Surface
Closets
Furniture Hardware Pulls & Knobs
Steel plate with pre-mounted Euro-screws, fixing distance 37 mm, line boring 32 mm Height adjustment: ±2 mm Side adjustment: +1/-3 mm Depth adjustment: +3/-1 mm All adjustment options are independent of one another.
height adjustment
00 02
12-904 12-906
Lighting
Grommets Locks, Lock Systems Molding, Carvings
Tools Adhesives Solvents Abrasives Chemicals Staples Screws
96
Special mounting plates for face frame construction 3-D cam plate for face frame construction, for wood screw fixing Special plate for face frame construction, for wood screw fixing.
depth adjustment
5/8” OL 1/2” OL
height adjustment
12-940 12-942 height adjustment
5/8” OL 1/2” OL
12-920 12-922
SNAP-ON HINGES
Nexis Mounting Plates Fixing distance 37 mm, line boring 32 mm DESCRIPTION
Cam plate for wood screw fixing, with three point mounting.
PANEL THICKNESS
00 02 04
ORDER NO.
12-932 12-934 12-937
Kitchens
Doors
PHOTO
depth adjustment
Kitchen Accessories
height adjustment
Hinges
Drawer Slides Plywood Melamine
Veneer
Cam plate with pre-mounted Euro-screws with three point mounting
00 02 04 08
12-944 12-946 12-941 12-939 *
depth adjustment
height adjustment
Edgebanding
Laminate
Solid Surface
* With Euro Screws
Closets
Height adjustment: ±2 mm Side adjustment: +1/-3 mm Depth adjustment: +3/-1 mm All adjustment options are independent of one another.
00 02
12-950 12-952
height adjustment
Furniture Hardware Pulls & Knobs Lighting
Grommets
Height adjustment: ±2 mm Side adjustment: +1/-3 mm Depth adjustment: +3/-1 mm All adjustment options are independent of one another.
00 02 04
12-951 12-954 12-956
height adjustment
Locks, Lock Systems Molding, Carvings
Tools
Zinc diecast plate for wood screw fixing, fixing distance 37 mm, line boring 32 mm
Adhesives Solvents Abrasives
00 02 04 08 18
12-910 12-926 12-928 12-912 12-914
height adjustment
Chemicals Staples Screws
97
3 Depth Adjustment.........out 2.5mm [3⁄32”], in .5mm [1⁄32”]
TEC – 864 with 3-D Adjustment Description
Overall Dimensions Doors
5 [3/16”]
Kitchen Accessories
10 [3/8”] 7
Hinges [9/32”]
• • • • • • • •
42mm drilling pattern
3-D adjustment hinges Cup depth only 10.5 mm (7/16”) 11 20 ”] [7/16 [25/32”] to 19 mm For door thicknesses from 12.5 mm (1/2”) (3/4”) 2.5 57 All metal construction [3/32”] [2 1/4”] 42 Concealed double torsion spring [1 21/32”] Ø35 108° 39 opening angle [1 3/8”] [1 9/16”] Ø8 Available overlays: 1/2”, 1-1/4”, 1-3/8” [5/16”] Wrap around face frame mounting
Drawer Slidesto technical modifications without notice. Subject
TEC 864 1/2”
U.S. Patent #s 6,647,591 and 5,604,956
45mm drilling pattern 20 [25/32”] 2.5 [3/32”]
9.5 [3/8”] ACC 140
Kitchens
TEC 861 MDF
TEC 861
FACE FRAME HINGES
45 [1 25/32”]
Ø35 [1 3/8”] Ø8 [5/16”]
America™ TEC 864Grass3/4”
7
Installation Tools
Rotate cam screw. Mounting Screws Hinge cup to door, #6 x 5⁄8” Flat head screw Base plate to face frame, #8 x 3⁄4” Pan head screw
TEC 864 1”
Plywood Melamine
Veneer
Edgebanding
Laminate
Screw-on........................... 11-800 Dowels............................... 11-806
Screw-on........................... 11-812 Dowels............................... 11-814
Screw-on........................... 11-816 Dowels............................... 11-818 10.5
10.5
Solid Surface
Closets
Furniture Hardware
o17.5 Pulls & Knobs Lighting
11/ ” 16
o 23.9
- 20.5 - 13/16”
TEC 864 1-1/4”
15/ ” 16
- 26.9 - 1-1/16”
TEC 864 1-3/8”
Grommets Locks, Lock Systems Molding, Carvings
Screw-on........................... 11-802 Dowels............................... 11-808
ACC – 140
Tools
Benefits
Adhesives Solvents Abrasives
• Small gaps
Chemicals Staples Screws
• Best access into cabinet • Sturdy and strong hinge design
Description • 130° Opening angle • Suitable for overlays from 26-29 mm
98
Screw-on........................... 11-804 Dowels............................... 11-810
Screw-on........................... 11-186
SOFT CLOSE HINGES
Soft-Close Nexis - Unique Door Hinge System Kitchens
Soft-close Nexis – quick and easy to install.
Doors
1
Kitchen Accessories
2
3
Hinges
Drawer Slides
4
5
6
Plywood Melamine
Veneer
Edgebanding
Laminate
Solid Surface
Closets
Furniture Hardware
Mounting is tool less, easy and quick:
Pulls & Knobs Lighting
1. Remove cover cap (if installed) on 00 cranking hinges. 2. Insert Soft-close Nexis adapter into notches located on the sides of the hinge cup and attach adapter. 3. Press both sides of the adapter downwards until you hear a noticeable “click”. Please Check: Are notches located on both sides of the hinge cup?
4. Mount cover cap on hinge if desired. (cover cap is included in set) 5. Adjust soft-close Nexis to different opening angles and cranking if necessary via adjustment screw. 6. Use cover for hinge cup (included in set) for the hinge without Soft-close Nexis to achieve a uniform appearance.
Grommets Locks, Lock Systems Molding, Carvings
Tools Adhesives Solvents Abrasives Chemicals Staples Screws
The optional Soft-close Nexis is suitable for the following hinges of the new Nexis Click-on series: Nexis 04, Nexis 05, Nexis 22 and Nexis 29.
99
SOFT CLOSE HINGES
Kitchens
Doors
Soft-Close for Impresso Suitable for new Impresso 04, Impresso 05, Impresso 22 and Impresso 29 hinges
Soft-Close Twin
Kitchen Accessories
Hinges
Drawer Slides
1 Set consisting of:
Plywood Melamine
1 Soft-close CST adapter Veneer
2 Hinge arm cover caps
Edgebanding
Laminate
Solid Surface
Closets
Soft-Close Nexis
Order Number................... 12-884
UniSoft Suitable for new Nexis 04, Nexis 05, Nexis 22 and for Nexis 29 hinges Soft-close doors
Cover cap for Nexis hinge cup
Soft-close Nexis adapter With pre-mounted Soft-close
Furniture Hardware
• • • • •
Pulls & Knobs
• •
UniSoft Soft-close for doors
Lighting
Order Number................... 12-882
Works for face frame c Works for frameless ca Blends in well with hin Non-handed with a low Manually adjustable to Easy to mount by loca Scratch protector and for a quiet close
Order Number................... 12-880
Grommets
UniSoft adapter Locks, Lock Systems Molding, Carvings
Tools Adhesives Solvents Abrasives Chemicals Staples Screws
•
Soft-Close Description
• Works for face frame cabinets on all door overlays • Works for frameless cabinets on full overlay doors • Blends in well with hinge finish • Non-handed with a low profile design • Manually adjustable to desired closing speed • Easy to mount by locating in the corner • Scratch protector and front bumper with cushion for a quiet close
A
UniSoft adapter
48 [1
7/8”]
17 [11/16”] Clearance The UniSoft mounts independently from
Order Number................... 12-888
in the upper corner of your cabinet and i
Adjustment Screw
100
Works
• Works The UniSoft mounts independently from the hinge • in the upper corner of your cabinet and instantly Blends • Non-ha allows the cabinet door to close quietly and • Manua smoothly. Its sleek brushed nickel look houses the • Easy to P UniSoft damper. The UniSoft can be adjusted by• Scratch P the turn of a screw to the desired closing speed. for a qu P
Front bumper with cushion
allows the cabinet door to close quietly a 30 smoothly. Its sleek nickel look h /16”] [1 13brushed
UniSoft damper. The UniSoft can be adju
the turn of a screw to the desired closing
17 [11/16”]
•
•
Functional design Accurate fence is easily adjusted Chip removal by air on pneumatic machines Easy, fast and efficient operation Easy maintenance 42 mm boring pattern
•
Functional design Accurate fence is easily adjusted Chip removal by air on pneumatic machin Easy, fast and efficient operation Easy maintenance 42 mm boring pattern
DRILLING & INSERTION EQUIPMENT • • • • •
• • • •
Ecopress
Ecopress Kitchens Drilling and insertion machine for 42 mm boring pattern Drilling and insertion machine for 45mm boring pattern
Doors
Description • • • • • • •
•
Bore depth automatically adjusts to material thickness Functional design Accurate fence is easily adjusted Chip removal by air on pneumatic machines Easy, fast and efficient operation Easy maintenance 45 mm boring pattern
• • • • • •
Bore depth autom Kitchen Accessories Functional design Accurate fence is ChipHinges removal by a Easy, fast and eff Easy maintenance Drawer 42 Slides mm boring pa Plywood Melamine
Item No. 91934-01
Veneer
91933-01
Edgebanding
91935-01
*Special Order*
91931-01 91932-01
Laminate
PU 1 piece
Motor configuration 110v single phase manual Pneumatic control 110v single phase pneumatic Pneumatic feed and pneumatic 220v single phase manual hold-down device.
Solid Surface
Item No. 91934-01
220v single phase pneumatic
Hold-down block 91933-01 Optimum fixing on the Ecopress 91935-01 Pneumatic with the pneumatic 91931-01 hold-down device.
220v three phase pneumatic
91932-01
Closets
Furniture Hardware Pulls & Knobs
PU 1 piece
Motor configuration
Item No.
110v single phase manual
91934-01
110v single phase pneumatic
91933-01
220v single phase manual
91935-01
Scale bar 220v single phase pneumatic Pneumatic control Hold-down block 220v three phase pneumatic Graduated scale for exact Dimensions in millimeters, fractional inch equivalents noted. Pneumatic feed and pneumatic Optimum fixing onasthe Ecopress hold-down device. Pneumatic with the pneumatic measurement on the machine. hold-down device.
Lighting
Pneumatic91931-01 control Pneumatic91932-01 feed and pneumatic 1 piece hold-down PU device.
Grommets
Hold-down Optimum fixi Locks, Lock Pneumatic w Systems hold-down de Molding, Carvings
Tools Pneumatic control Pneumatic feed and pneumatic hold-down device. Adhesives
Scale bar Graduated scale for exact measurement on the machine.
Solvents Abrasives
Chemicals Staples Screws
78
www.grassusa.com
Scale bar Graduated scale for exact measurement on the machine.
Dimensions in millimeters, fractional inch eq
101
SNAP-ON HINGES 110° Screw-On Hinge Kitchens
Doors
Kitchen Accessories
• Self Closing • 35mm Cup • 45mm Boring Pattern •All Steel Construction
Hinges
Drawer Slides Plywood Melamine
Veneer
Edgebanding
Laminate
Solid Surface
Order Number
Description
14-101
110° Screw-on Hinge
Closets
Furniture Hardware Pulls & Knobs Lighting
Grommets Locks, Lock Systems Molding, Carvings
Tools Adhesives Solvents Abrasives Chemicals Staples Screws
102
1 PIECE PLATE
1 PIECE PLATE
0mm PLATE WITH EURO SCREWS 14-213
0mm PLATE WITHOUT SCREWS 14-215
SNAP-ON HINGES 110° Snap-On Hinge • Self Closing • 35mm Cup • 45mm Boring Pattern •All Steel Construction
Kitchens
Doors
Kitchen Accessories
Hinges
Drawer Slides
1 PIECE PLATE
0mm PLATE WITHOUT SCREWS 14-200 Cover cap not included
2mm PLATE WITHOUT SCREWS 14-202 0mm PLATE WITH EURO SCREWS 14-205
FACE FRAME
0mm PLATE FOR 5/8” OVERLAY 14-212 4mm PLATE FOR 1/2” OVERLAY 14-214
2mm PLATE WITH EURO SCREWS 14-207
2 PIECE PLATE
0mm PLATE WITHOUT SCREWS 14-204 2mm PLATE WITHOUT SCREWS 14-206 0mm PLATE WITH EURO SCREWS 14-209 2mm PLATE WITH EURO SCREWS 14-211
Plywood Melamine
Veneer
Edgebanding
Laminate
Solid Surface
Closets
Furniture Hardware Pulls & Knobs
FULL OVERLAY
FULL OVERLAY
HINGE 14-100
HINGE with Dowels 14-102
Lighting
Grommets Locks, Lock Systems
HALF OVERLAY
HALF OVERLAY
HINGE 14-104
HINGE with Dowels 14-106
Molding, Carvings
Tools Adhesives Solvents Abrasives
INSET OVERLAY
Chemicals Staples Screws
HINGE 14-108
103
SNAP-ON HINGES
Kitchens
Doors
Kitchen Accessories
30°, 45º & 90º Snap-On Hinge • Self Closing • 35mm Cup • 45mm Boring Pattern •All Steel Construction
Hinges
30° FULL OVERLAY
Drawer Slides
HINGE with Dowels 14-130
Plywood Melamine
Veneer
Edgebanding
45° FULL OVERLAY
Laminate
HINGE with Dowels 14-132
Solid Surface
Closets
90° FULL OVERLAY
Furniture Hardware
HINGE with Dowels 14-134
Pulls & Knobs Lighting
Grommets Locks, Lock Systems Molding, Carvings
1 PIECE PLATE Tools Adhesives Solvents Abrasives Chemicals Staples Screws
0mm PLATE WITHOUT SCREWS 14-200 2mm PLATE WITHOUT SCREWS 14-202 0mm PLATE WITH EURO SCREWS 14-205 2mm PLATE WITH EURO SCREWS 14-207
104
FACE FRAME
0mm PLATE FOR 5/8” OVERLAY 14-212 4mm PLATE FOR 1/2” OVERLAY 14-214
2 PIECE PLATE
0mm PLATE WITHOUT SCREWS 14-204 2mm PLATE WITHOUT SCREWS 14-206 0mm PLATE WITH EURO SCREWS 14-209 2mm PLATE WITH EURO SCREWS 14-211
SNAP-ON HINGES 125° Full Access Snap-On Hinge Kitchens
Doors
Kitchen Accessories
125 Full Overlay / Dowels and CAM Adjustment 14-120
E
BL A ST M U J R AD E A G M CA HIN
Hinges
Drawer Slides Plywood Melamine
Veneer
Edgebanding
Laminate
Solid Surface
Closets
Furniture Hardware
1 PIECE PLATE
FACE FRAME
2 PIECE PLATE
Pulls & Knobs Lighting
0mm PLATE WITHOUT SCREWS 14-200 2mm PLATE WITHOUT SCREWS 14-202 0mm PLATE WITH EURO SCREWS 14-205 2mm PLATE WITH EURO SCREWS 14-207
0mm PLATE FOR 5/8” OVERLAY 14-212 4mm PLATE FOR 1/2” OVERLAY 14-214
0mm PLATE WITHOUT SCREWS 14-204 2mm PLATE WITHOUT SCREWS 14-206 0mm PLATE WITH EURO SCREWS 14-209 2mm PLATE WITH EURO SCREWS 14-211
Grommets Locks, Lock Systems Molding, Carvings
Tools Adhesives Solvents Abrasives Chemicals Staples Screws
105
SNAP-ON HINGES 165° Snap-On Hinge Kitchens
Doors
Kitchen Accessories
• Self Closing • 35mm Cup • 45mm Boring Pattern •All Steel Construction • Clip-On Hinge
Hinges
Drawer Slides Plywood Melamine
Veneer
Edgebanding
Order Number Description 14-139
Laminate
165° Snap-on Hinge with Dowels
Solid Surface
Closets
Furniture Hardware Pulls & Knobs Lighting
Grommets Locks, Lock Systems Molding, Carvings
1 PIECE PLATE
FACE FRAME
Tools Adhesives Solvents Abrasives Chemicals Staples Screws
0mm PLATE WITHOUT SCREWS 14-200 2mm PLATE WITHOUT SCREWS 14-202 0mm PLATE WITH EURO SCREWS 14-205 2mm PLATE WITH EURO SCREWS 14-207
106
0mm PLATE FOR 5/8” OVERLAY 14-212 4mm PLATE FOR 1/2” OVERLAY 14-214
2 PIECE PLATE
0mm PLATE WITHOUT SCREWS 14-204 2mm PLATE WITHOUT SCREWS 14-206 0mm PLATE WITH EURO SCREWS 14-209 2mm PLATE WITH EURO SCREWS 14-211
SNAP-ON HINGES Pie Cut Free Swing Snap-On Hinge Kitchens
• Self Closing • 35mm Cup • 45mm Boring Pattern •All Steel Construction
Doors
Kitchen Accessories
Hinges
Drawer Slides
PIE CUT FREE SWING
Plywood Melamine
HINGE with Dowels 14-138
Veneer
Edgebanding
Laminate
Solid Surface
Closets
Furniture Hardware Pulls & Knobs Lighting
1 PIECE PLATE
FACE FRAME
2 PIECE PLATE Grommets
0mm PLATE WITHOUT SCREWS 14-200 2mm PLATE WITHOUT SCREWS 14-202 0mm PLATE WITH EURO SCREWS 14-205 2mm PLATE WITH EURO SCREWS 14-207
0mm PLATE FOR 5/8” OVERLAY 14-212 4mm PLATE FOR 1/2” OVERLAY 14-214
0mm PLATE WITHOUT SCREWS 14-204 2mm PLATE WITHOUT SCREWS 14-206 0mm PLATE WITH EURO SCREWS 14-209 2mm PLATE WITH EURO SCREWS 14-211
Locks, Lock Systems Molding, Carvings
Tools Adhesives Solvents Abrasives Chemicals Staples Screws
107
SPECIALTY HINGES
Kitchens
6-Way Adjustable Face Frame Hinge
Doors
Kitchen Accessories
Hinges
Drawer Slides Plywood Melamine
Veneer
Edgebanding
Laminate
Solid Surface
Closets
Screw-on 14-114
Furniture Hardware Pulls & Knobs Lighting
Grommets Locks, Lock Systems Molding, Carvings
Tools Adhesives Solvents Abrasives Chemicals Staples Screws
108
With Dowel 14-156
Screw-on With Dowel 14-112 14-110
SPECIALTY HINGES 304B Stainless Steel Concealed Hinges Description:
• Material: 304 Stainless Steel • Cup dia Ø 35 / Bore depth 11 mm
19 mm Overlay
• Finish: Polished • 100° Opening • Door thickness 15-20 mm
14 mm Overlay
9 mm Overlay
Kitchens
Doors
Kitchen Accessories
Hinges
Drawer Slides
Self-closing Overlay............ 55-300 Free-swinging Overlay........ 55-304
Self-closing Overlay............ 55-308 Free-swinging Overlay........ 55-310
Self-closing Overlay............ 55-314 Free-swinging Overlay........ 55-316
Plywood Melamine
Veneer
Edgebanding
Mounting Plate
Laminate
Solid Surface
Closets
Mounting Plate..................... 55-312 Furniture Hardware
Fixed Pin Institutional Hinge
Pulls & Knobs Lighting
Grommets Locks, Lock Systems
Sold Seperatley
Description • 3-way adjustable • Nickel plated • Full overlay Order Number
Description
• Self-closing
11-210
Screws
• Opening 270 degree
11-212
Hinge Cup
11-214
Hinge Arm
Molding, Carvings
Tools Adhesives Solvents Abrasives Chemicals Staples Screws
109
SPECIALTY HINGES Pivot Hinges
Kitchens
Doors
Kitchen Accessories
Hinges
Drawer Slides
• • • • • • • •
Screw-Mounted Max. Door Opening Angle 250° Without Stop With Outer Knuckle Fitted Above Doors Creates A Concealed Look Installed On Top Or Bottom Edge Of Door. Pivot Sets Are Equipped With A Heavy-Weight Anti-Friction Bearing Assembly.
Plywood Melamine
Veneer
Edgebanding
Laminate
Solid Surface
2 1/2” Closets
Furniture Hardware
2 1/4”
Pulls & Knobs
2”
Lighting
Grommets Locks, Lock Systems Molding, Carvings
Tools Adhesives Solvents Abrasives Chemicals Staples Screws
110
Part # 55-184 55-186 55-188
DESCRIPTION 2” Pivot hinge 2 1/4” Pivot hinge 2 1/2” Pivot hinge
SPECIALTY HINGES Pivot Hinges Kitchens
• • • • • • • •
Screw-Mounted Max. Door Opening Angle 250° Without Stop With Outer Knuckle Fitted Above Doors Creates A Concealed Look Installed On Top Or Bottom Edge Of Door. Pivot Sets Are Equipped With A Heavy-Weight Anti-Friction Bearing Assembly.
Doors
Kitchen Accessories
Hinges
Drawer Slides Plywood Melamine
Veneer
Edgebanding
Laminate
Solid Surface
Closets
Furniture Hardware Pulls & Knobs Lighting
Grommets Locks, Lock Systems Molding, Carvings
Tools Adhesives Solvents Abrasives Chemicals Staples Screws
111
SPECIALTY HINGES
Glass Door Hinges & Catch Plates Kitchens
Doors
Kitchen Accessories
Non-bore “TECH” Glass Door Hinge • Removable Lock Catch • Fits 3/16” or 1/4” Glass • Opening Angle 170°
• Height Adjustable • Easy Installation • Economical
Inset Brass.............. 13-270 Inset Chrome.......... 13-272 Overlay Brass......... 13-274 Overlay Chrome...... 13-276
Hinges
Drawer Slides Plywood Melamine
Non-bore Glass Door Simplex Inlay Hinge Veneer
Edgebanding
• Fits 3/16” or 1/4” Glass • Application: Inset door • Sold per Pair
Laminate
Solid Surface
Polished Brass....... 13-108 Polished Chrome.... 13-106
Closets
Furniture Hardware Pulls & Knobs Lighting
Grommets Locks, Lock Systems
Non-bore Catch Plates Slip-on Plate • • • •
Fits 3/16” or 1/4” Glass Adhesive cushion included Use with magnetic touch latch Sold per piece Polished Brass....... 13-178 Polished Chrome.... 13-180
Molding, Carvings
Tools Adhesives Solvents Abrasives Chemicals Staples Screws
112
Slip-on Plate with Pull • • • •
Fits 3/16” or 1/4” Glass Adhesive cushion included Use with magnetic touch latch Sold per piece Polished Brass....... 13-110 Polished Chrome.... 13-112
SPECIALTY HINGES Suitable for flaps of max. 20 mm (3/4”) thickness
Flap Hinge Kitchens
• Three-way adjustable • Angle of opening: 90° • Diameter of both parts: 35 mm • Depth of both parts: 12 mm
Doors
Kitchen Accessories
Hinges
Nickel Plated........... 15-134
Drawer Slides Plywood Melamine
Cabinet Hinges
All hinges sold with screws
Veneer
Edgebanding
Slab Hinges Decorite Decorite Decorite Decorite Decorite
Chrome.................. 21-146 Antique Brass........ 21-300 White Epoxy.......... 21-302 Polished Brass...... 21-304 Satin Chrome......... 21-306
Laminate
3/8” Offset Hinges Solid Surface
Chrome.................................. 21-132 (not shown)
Closets
Furniture Hardware
Slotted Pin Hinge for Overlay Door Nylon Rollers
Pivot with Two Nylon Washers Locking Cam
Bright Nickel Youngsdale (Y5).........21-158 Antique Brass Youngsdale (Y5).......21-262 Bright Nickel Youngsdale (Y6).........21-228
Lighting
Grommets
Adjustment Slots Locating Tabs
RPC Institutional Hinge
21-238 Chrome
21-240 Chrome
21-232 Chrome 21-234 Black
Pulls & Knobs
• 2-3/4” Five knuckle hinge .095 steel • Designed for 32 mm hole system • Hospital tips availble • Minartet tips only for M376 • Sold: each
Locks, Lock Systems Molding, Carvings
Tools Adhesives Solvents Abrasives Chemicals Staples Screws
113
SPECIALTY HINGES
Miscellaneous Hinges Kitchens
Double Action Spring Hinge Doors
Hinges
Drawer Slides
• • • • • •
Self-closing Adjustable Speed Control Resistance to bending Finish: Alumite (Silver) For door thickness 30 mm (1-3/16”) Weight: 9 lbs. per hinge
180 mm (7/16”)
96 mm (3-3/4”) Kitchen Accessories
27mm
42mm
27mm
Order number......... 21-186
Plywood Melamine
Stainless Steel Pivot Hinge Veneer
Edgebanding
Laminate
Solid Surface
Door thickness 22 mm (7/8”)
Closets
Furniture Hardware
Order number......... 55-180
Pulls & Knobs Lighting
Grommets Locks, Lock Systems Molding, Carvings
Tools
Pivot Hinge for Inset Doors • Concealed: Not visible from outside of cabinet • Economical hinge for inset doors • For doors up to 1” thick • Easy mounting • Horizontal 4 mm adjustment Includes: 1 Upper Hinge • 2 Bushings 1 Lower Hinge • 4 Mounting Screws
Order number......... 21-260 Easy-on Hinge
Adhesives Solvents Abrasives Chemicals Staples Screws
• • • •
For overlay doors Bright nickel finish Self-closing 90° opening angle Sold without screws Order number......... 21-138
114
SPECIALTY HINGES
Miscellaneous Hinges Kitchens
Piano Hinges Doors
Kitchen Accessories
ORDER OPEN SCREWS FINISH MATERIAL GAUGE NO. WIDTH INCLUDED 21-102 1-1/4” NO NICKEL STEEL .028 21-104 1-1/2” NO NICKEL STEEL .032 21-106 2” NO NICKEL STEEL .045 21-108 1-1/4” NO BRASS STEEL .028 21-110 1-1/2” NO BRASS STEEL .032 21-112 2” NO BRASS STEEL .045 21-126 1-1/16” YES BRITE STL STNLS .042 21-128 1-1/2’ YES BRITE STL STNLS .042 21-130 2” YES BRITE STL STNLS .042
Hinges
Drawer Slides Plywood Melamine
Veneer
Edgebanding
Laminate
All lengths stocked 72” long with 2” hole centers
Solid Surface
4” 2-Way Swing Hinge
Closets
Double action spring hinges give closing action from either direction. Energy is stored in the spring as the door is opened, and closes the door after it is released. Spring tension is adjustable at any time. Sprayed Brass........ 21-182 Zinc Plated.............. 21-184
Furniture Hardware Pulls & Knobs
Door thickness 3/4” to 1-1/4”
Lighting
Grommets
Heavy Duty Table Flap Hinge
Locks, Lock Systems Molding, Carvings
Tools Adhesives Solvents Abrasives
Order number......... 43-730
• Convert square tables to round or add length to any table • .098 Gauge • Sold individually with screws • Yellow Zinc finish
Chemicals Staples Screws
115
SPECIALTY HINGES
Miscellaneous Hinges Kitchens
SOSS® Invisible Hinges
BRASS PLATED INVISIBLE HINGE
Doors
ORDER NO. 21-170 21-171 21-172 21-174 21-176 21-178
Kitchen Accessories
Hinges
Drawer Slides
MIN. WOOD THICKNESS 3/4” 1” 1-1/8” 1-3/4” 1-3/8” 2”
PLATE WIDTH 1/2” 5/8” 3/4” 1-1/8” 1” 1-3/8”
PLATE LENGTH 2-3/8” 2-3/4” 3-3/4” 4-5/8” 4-5/8” 5-1/2”
SATIN CHROME INVISIBLE HINGE ORDER NO. 21-168 21-175 21-177
Plywood Melamine
Veneer
Edgebanding
MIN. WOOD THICKNESS 3/4” 1-3/4” 1-3/8”
PLATE WIDTH 1/2” 1-1/8” 1”
PLATE LENGTH 2-3/8” 4-5/8” 4-5/8”
Adjustable Swing-out Fitting
Laminate
The swing-up fitting works both as a hinge and a flap stay. Two adjustable springs keep the door open or closed.
Solid Surface
Closets
• • • •
Furniture Hardware Pulls & Knobs
Ideal for overhead storage cabinet 75° Opening 1 Pair = 1 right and 1 left spring fitting Material: steel 1 Pair - White.......... 15-170
Lighting
Grommets
Lift-up Hinge
Locks, Lock Systems Molding, Carvings
By simply regulating the position of the two mounting plates the flap opening can be adjusted from 75° to 105° or more
Tools
Order number 15-180
Adhesives Solvents Abrasives Chemicals Staples Screws
116
Description • High strength and load capacity • Precision mechanism to ensure light and smooth action • Smooth opening – Flap held at any angle • Can be mounted also on aluminium frame flap doors • Totally unaffected by moisture
1 2 1. Screw on the quick mounting plates to cabinet and flap 2. Click on flap joint stay to mounting plates 3. Adjust friction force according to flap dimension and weight
3
Most of the merchandise in this catalog is available in all Hardware Imagination locations. If your selection isn’t available at the store nearest you, we’ll gladly order it from one of the other stores or through special order.
LID STAYS
Lid Stays Kitchens
Order number......... 55-172 Doors
Kitchen Accessories
Hinges
• Material: 304 Stainless Steel Polyamide • Finish: Satin • Left or right hand installation • Screws not included
Drawer Slides Plywood Melamine
Veneer
Order number......... 55-172
Edgebanding
Laminate
Solid Surface
Order number......... 55-174
Closets
Furniture Hardware
Order number......... 55-176 • • • • • •
Positive stop to keep flap open Left or right hand installation Material: 304 Stainless Steel Finish: Satin Load capacity: 15kg/ea (33 lbs.) Screws not included
Pulls & Knobs Lighting
Grommets Locks, Lock Systems Molding, Carvings
Tools Adhesives Solvents Abrasives Chemicals Staples Screws
117
LID STAYS
Kinvaro T-65 Flap Lifter System
The T-65 series opens a single door that pivots from the top of a wall cabinet. No concealed hinges are required in the top panel.
Kinvaro Lifter System Features
Kitchens
• The integral damping device slows down the door enabling a Soft-close® action • The Lifter permits a zero top reveal through its multi-pivot points allowing cabinets to be stacked • The integral damping device slows down the door enabling a • Maximum door opening angle of 100° Soft-close® action •multi-pivot A wide range of cabinet doors can be accommodated • The Lifter permits a zero top reveal through its • Door opens with a light touch and remains in place from 45° to its top position points allowing cabinets to be stacked • Lifter mounts towards the top which enables multiple shelves • Maximum door opening angle of 100° • Door height adjustment via cam of +/- 2mm [1/8”] through keyhole mounting screws
Description Doors
Kitchen Accessories
• A wide range of cabinet doors can be accommodated • Door opens with a light touch and remains in place from 45° to its top position • Lifter mounts towards the top which enables multiple shelves Order information: • Door height adjustment via cam of +/- 2mm (1/8”) through 1. Hardware components are supplied as a set to mount on wooden or aluminum framed keyhole mounting screws
Hinges
Drawer Slides Plywood Melamine
Veneer
Edgebanding
Laminate
Solid Surface
Closets
Furniture Hardware Pulls & Knobs
doors with a minimum 45mm [1 ”] stile width
2. The following combination of factors determine what spring configuration to use: Cabinet Order information: height and width, door weight 1. Hardware components are supplied as a set to mount on 1. 3. KB-65 Lifter Sets include: Right & Left Hand Lifter units with integral door mounting wooden or aluminum framed doors with a minimumbrackets and gray cover caps, one set of balance springs are pre-installed, one extra pair of 1. 45mm (1”) stile width. coded springs are included for alternate weight ranges 2. The following combination of factors determine what spring 1. configuration to use: Cabinet height and width, door weight. 3. KB-65 Lifter Sets include: Right & Left Step Hand2 Lifter units Step 1 Order 1. with integral door mounting brackets and gray coverspring caps, 1. Choose the Lifter Set: Choose the correct configuration: Door Type Door OverlayFrameOrder DoorNumber Door Type Item Number • 1.Lifter setsset for wood doors also cover aluminum frame • From the tables below,pair choose one of balance springs are pre-installed, one extra 1.the door height Width Overlay Wood 14-9⁄16” 15-174 with a minimum stile width of 45mm [1 3/4”] in the first column ofdoors coded springs are included for alternate weight ranges. 14 • Cross reference to the door weight including Wood
[9⁄16”]
D267.200.23.25
handle Step 2 in the second column Aluminum Frame 19 14 • Checkthe doorcorrect width from the third or fourth Choose spring configuration: Overlay 14 [3⁄4”] [9⁄16”] column depending on which type of handle will • From the tables below, choose the door height in the first column be used 17 Aluminum 19 • Cross reference to the door weight including handle in the Frame second column • The combination of this data determines the [3⁄4”] [11⁄16”] Overlay 17 • Check door width from the third or fourth column depending on which type of application and springs handle used • Lifterwill unitsbe come with black springs pre-installed. • The combination datafordetermines the application and springs Yellow springs mustof bethis installed light and • Lifter units come with black springs pre-installed. medium applications • Yellow springs must be installed for light and medium applications
Light Applications - Yellow spring mounted on one side
Medium Applications - Yellow springs mounted on both sides
Heavy Applications - Black springs mounted on both sides
Door Height
Door Wt. lbs. [kg]
Door width small handle
Door width bar handle
Door Height
Door Wt. lbs. [kg]
Door width small handle
Door width bar handle
450 - 1000 [17 11⁄16” - 39 3⁄8”]
350 - 750 [13 3⁄4” - 29 1⁄2”]
250 [9 13⁄16”]
5.3 - 16.3 [2.4-7.4]
600 - 1200 [23 5⁄8” - 47 1⁄4”]
450 - 1200 [17 11⁄16” - 47 1⁄4”]
Lighting
Grommets
N/A
Step 1 Choose the Lifter Set: • Lifter sets for wood doors also cover aluminum frame doors with a minimum stile width of 45mm (1 3/4”)
Door width small handle
D267.251.83.25
Locks, Lock Systems
Door Height
Door Wt. lbs. [kg]
250 [9 13⁄16”]
1.9 - 4.6 300 - 500 300 - 350 [0.9-2.1] [11 13⁄16” - 19 11⁄16”] [11 13⁄16” - 13 3⁄4”]
250 [9 13⁄16”]
4.0 - 9.2 [1.8-4.2]
Molding, Carvings
300 [11 13⁄16”]
1.5 - 3.7 [0.7-1.7]
300 [11 13⁄16”]
3.1 - 7.5 300 - 700 300 - 500 [1.4-3.4] [11 13⁄16” - 27 9⁄16”] [11 13⁄16” - 19 11⁄16”]
300 [11 13⁄16”]
4.4 - 13.9 [2-6.3]
450 - 1200 [17 11⁄16” - 47 1⁄4”]
300 - 1000 [11 13⁄16” -39 3⁄8”]
350 [13 3⁄4”]
2.2 - 6.4 300 - 500 [1-2.9] [11 13⁄16” - 19 11⁄16”]
300 - 400 [11 13⁄16” - 15 3⁄4”]
350 [13 3⁄4”]
3.7 - 11.9 [1.7-5.4]
300 - 950 [11 13⁄16” - 37 3⁄8”]
300 - 750 [11 13⁄16” - 29 1⁄2”]
400 [15 3⁄4”]
1.8 - 5.5 [0.8-2.5]
300 - 300 [11 13⁄16” - 11 13⁄16”]
400 [15 3⁄4”]
3.3 - 10.3 [1.5-4.7]
300 - 700 [11 13⁄16” - 27 9⁄16”]
300 - 600 [11 13⁄16” - 24 13⁄16”]
450 [17 11⁄16”]
1.5 - 4.8 300 - 300 [0.7-2.2] [11 13⁄16” - 11 13⁄16”]
N/A
450 [17 11⁄16”]
2.9 - 9.2 [1.3-4.2]
300 - 550 [11 13⁄16” - 21 5⁄8”]
300 - 450 [11 13⁄16” - 17 11⁄16”]
500 [19 11⁄16”]
1.3 - 4.4 [0.6-2]
N/A
500 [19 11⁄16”]
2.9 - 8.6 [1.3-3.9]
300 - 450 [11 13⁄16” - 17 11⁄16”]
300 - 400 [11 13⁄16” - 15 3⁄4”]
550 [21 5⁄8”]
2.9 - 7.5 [1.3-3.4]
N/A
N/A
600 [23 5⁄8”]
2.9 - 6.8 [1.3-3.1]
N/A
N/A
300 - 350 [11 13⁄16” - 13 3⁄4”]
Door width bar handle
D267.252.23.25
N/A
Tools Adhesives Solvents Abrasives Chemicals Staples Screws
Note: As there are adjustments for the spring balance and dampening force, rounding up or down to match your door height is possible. For heavier doors than are shown in the tables, use the T-70 series. • Weights based on 19mm [3/4”] thick MDF door with bar handle • Bar handle weight is calculated at .22 lbs per 100mm [4”] • A trial application is recommended in all situations
118
8
www.grassusa.com
300 - 350 [11 13⁄16” - 13 3⁄4”]
N/A
Dimensions in millimeters, fractional inch equivalents as noted.
LID STAYS
Technical Specifications
Legend B Dimension B BR Bottom Reveal C Dimension C CR Center Reveal DH that Door Height The Kinvaro Lifter System opens a single door H Cabinet Height pivots from the top of a wall cabinet. SO Side Overlay NOTE: No concealed hinges are required in the top TO panel. Top Overlay 33 Max. TO No minimum N [1 5/16"] 20 [13/16"] top reveal TR Top Reveal
Panel Cabinet Applications
97 [3 13/16"]
Max 20 [13/16"]
Aluminum Frame
Aluminum Frame
Mounting holes for lifter mechanism Drill Ø5 x 12 deep for Euro screws or use #7 x 5/8" wood screw
4
DH
TO
48 [1 7/8"]
SO
Doors
Kitchen Accessories
+19 [3/4"]
16 [5/8"]
Drawer Slides
DH = (H-TR-CR-BR)/2
No minimum top reveal
Door Type
Door Overlay
Door Overlay
Wood
N
Face Frame Applications 30 TO [1 3/16"]
Max 20 [13/16"]
16
NOTE: Max. TO 20 [13/16"]
2 [1/16"] 14 gap Door Door Overlay 92 [1/16"] [ /16"] 19
Frame Width
Frame Width
Veneer
Edgebanding
19
Legend B C H SO TO
38 3 [1 1/2"]
Min. interior 143 [5 5/8"]
33 /716"] [1 548
Closets
clearance
[1 /8"]
110 [3/8"]
SO
19
18 + [ / "]
+19 [3/4"]
11 16
774 [2 15/16"]
48 [1 7/8"]
Locks, Lock Systems
97 [3 13/16"] 19 [3/4"] +
110 [3/8"]
18 + [ / "]
TO
SO SO
Molding, Carvings
774 [2 15/16"] 48
16 [5/8"]
TO
8
Tools
Mounting holes for lifter mechanism Drill Ø5 x 12 deep for Euro screws or use #7 x 5/8" wood screw
133 [5 1/4"] Min. interior 143 [5 5/8"]
2 [1/16"] 14 Door Overlay 9 [ /16"]
2 [1/16"] 17 Door Overlay 11 [ /16"] 19
Pulls & Knobs Lighting
Subject to technical modifications without / "] [1 notice.
[3/4"]
[3/4"] + SO TO Furniture Hardware
Grommets
Dimension B Dimension C Cabinet Height Side33Overlay [1 5/16"] Top Overlay
7
19 [3/4"]
32 [1 1/4"]
97 [3 13/16"]Lifter unit
Mounting holes for lifter mechanism Drill Ø5 x 12 deep for Euro screws or use #7 x 5/8" wood screw
133 [5 1/4"]
11 16
140 1 [5 1/2"]
140 1 [5 1/2"]
Frame Width
DH = (H-TR-CR-BR)/2
Face Frame Applications
TO
Solid Surface
Pilot holes for fixing bracket wood screws
[3/4"] Install blocking to flush out with face frame
Face Frame Applications
38 [1 1/2"] 38 3 [1 1/2"] - TOP thk. +
Mounting holes for lifter mechanism Drill Ø5 x 12 deep for Euro screws or use #7 x 5/8" wood screw
[3/4"]
4
SO
94 [3 11/16"]
DH
NOTE: Max. TO 20 [13/16"]
TO
[5/8"]
[1/16"]
Install blocking to flush out with face frame
19 [3/4"]
Laminate
17 Min. interior Door Overlay 11 [ /16"] 143 [5 5/8"]
Aluminum Frame
Frame Width
97 [3 13/16"]
33 [1 5/16"]
2
Dimension B Bottom Reveal Dimension C Center Reveal Door Height Cabinet Height Side Overlay Top Overlay Top Reveal
19 [3/4"]
15-174
133 [5 1/4"]
100°
[1/16"] 17 [11/16"]
Order Number
14-9⁄16”
Plywood Melamine
2 [1/16M "] 14 Door Overlay 9 [ /16"]
2
135 [5 5/16"]
Dimension B Dimension C Cabinet Height Side Overlay Top Overlay
32 [1 1/4"] Lifter unit clearance
Hinges
19 [3/4"]
Legend B C H SO TO
38 [1 1/2"] - TOP thk. +
19 [3/4"]
Aluminum Frame 4 Panel Cabinet CabinetApplications Applications Panel
Legend B BR C CR DH H SO TO TR
Pilot holes for fixing bracket wood screws
TO
Door gap 2 [1/16"]
Min. interior 143 [5 5/8"]
Technical Specifications
NOTE: Max. TO 20 [13/16"]
Kitchens
DH = (H-TR-CR-BR)/2 SO
94 [3 11/16"]
133 [5 1/4"]
Dimension B Bottom Reveal Dimension C Center Reveal Door Height Cabinet Height Side Overlay Top Overlay Top Reveal
TO
M Door gap 2 [1/16"]
Min. interior 143 [5 5/8"]
30 [1 3/16"]
135 [5 5/16"]
Legend B BR C CR DH H SO TO TR
DH
Kinvaro Lifter System
TO
100°
[1 1/2"] - TOP thk. +
Mounting holes for lifter mechanism Drill Ø5 x 12 deep for Euro screws or use #7 x 5/8" wood screw
133 [5 1/4"]
100°
Frame Width
Adhesives Solvents Abrasives Chemicals Staples Screws 19
Frame Width
[3/4"]
PU = packaging unit
Face Frame Applications Subject to technical modifications without notice.
9
119
LID STAYS Order number 15-150 Kitchens
Doors
Kitchen Accessories
Hinges
Drawer Slides Plywood Melamine
Veneer
Edgebanding
• • • • • •
Material: plastic, steel, Zinc alloy Finish: nickel Supplied with screws (3.5 x 14) Designed to securely latch a flap Available in white or black Recommended door thickness: 20 mm (25/32”) • Torque Calculation: Torque = door height x 1/2 x door weight Per piece: 35-50kg - cm (30-43 lbs. - inch) Per pair: 70-100kg - cm (60-85 lbs. - inch)
Laminate
Solid Surface
Closets
Furniture Hardware Pulls & Knobs Lighting
Grommets Locks, Lock Systems Molding, Carvings
Tools
• • • •
Material: plastic, steel, Zinc alloy Finish: nickel Supplied with screws (3.5 x 14) Designed to securely latch a flap closed and hold the flap in the fully opened position • Recommended door thickness: 20 mm (25/32”) • Torque Calculation: Torque = door height x 1/2 x door weight Per piece: 35-50kg - cm (30-43 lbs. - inch) Per pair: 70-100kg - cm (60-85 lbs. - inch) • Torque moment: 30-50kg cm/pc
Available in white or black Light duty model also available Order number......... 15-156
Econo Flap Stay
Adhesives Solvents Abrasives Chemicals Staples Screws
15” to 17” Flap Height Order number ......15-102
FINISH: Nickel and White Plastic
120
LID STAYS
Lid Stays, Brackets & Pads Kitchens
European Lid Stay
Doors
ORDER
DESCRIPTION
Doors Kitchen Accessories
NUMBER 15-112
80n gas spring lid stay
Up to 17lbs.
15-114
100n gas spring lid stay
Up to 23lbs.
15-116
120n gas spring lid stay
Up to 27lbs.
Hinges
Drawer Slides
Lid Stay • All metal housing • Black plastic stop and adjusting screw • Attractive in appearance – box only 19/32” wide • For lids up to 20 inches • One piece normally sufficient • Left and right interchangeable Order number......... 15-122
Plywood Melamine
Veneer
Edgebanding
Laminate
Sold in pairs. Adjustable friction fitting allows lowering at slow speed. Finish is bright nickel and arm length is 10-1/4”. Total length is 11”. You may adjust degree of opening by changing mounting. Turn adjusting screw clockwise to reduce braking. Folding Bracket
Closets
Furniture Hardware
To fold, lift slightly (to release the safety device). Press the release lever and the bracket will fold down.
Pulls & Knobs Lighting
/4”
12-1
4-1/4”
• Sold in pairs • Locking device is in the supporting arm. • Capacity: 50kg per pair • Finish: white
Solid Surface
Grommets Locks, Lock Systems
Order number......... 15-124
Molding, Carvings
Adjustable Vertical Cabinet Door Lift • • • • •
Inside Width 600-900mm Max Front Weight 5kg Soft Opening Mechanism Ideal for European Style Cabinets Adjustable Frame for Perfect Fit
Tools Adhesives Solvents Abrasives Chemicals Staples Screws
Order Number ...15-188
121