Size Optimization process of an Exhaust System Mauricio Monteagudo G. R&D Exhaust Durability Manager Faurecia R&D, France.
2nd European Hyperworks Technology Conference 2008 Strasbourg, France.
Agenda
Introducing Faurecia
Aim
Virtual Durability Product Development
Size Optimization
Summary
2nd Hyperworks Technology Conference Strasbourg, France. Property of Faurecia - duplication prohibited
2
2
Introducing Faurecia
Faurecia is an expert in 6 major modules Acoustic package n°3 in Europe
Exhaust system n°1 in Europe n°2 worldwide
Seating n°2 in Europe n°3 worldwide
Door panel / Modules n°1 in Europe n°1 worldwide
Instrument panel / Cockpit n°1 in Europe n°1 worldwide
Front end n°1 in Europe n°2 worldwide
4
International ESPG footprint
NORTH AMERICA 6 Production plants 3 JIT 1 D&D center
EUROPE 9 Production plants 10 JIT 1 R&D center 3 D&D centers USA Korea China
Mexico
Plants
Brazil
ASIA 5 Plants 1 Customer office 2 D&D centers Japan
ROW 3 Plants 1 JIT
R&D Center D&D Center
Argentina
South Africa
Customer Office
www.faurecia.com 5
Aim
Aim
Size Optimization approach to:
NVH Decrease Hanger Forces Early selection of decoupling elements dynamic characteristics
Durability Bending Moments at the I/O volumes Stress values vs. worst resonant frequencies Lightweight if loads are lower thanks to the more efficient decoupling values.
Time
Global virtual durability development to optimize the dynamic behavior of Exhaust Systems.
7
2nd Hyperworks Technology Conference Strasbourg, France. Property of Faurecia - duplication prohibited
7
Virtual Durability Development
8
Overview of Exhaust System
Hot End
Cold End
Emission control
Acoustic
Structural integrity Durability 2nd Hyperworks Technology Conference Strasbourg, France. Property of Faurecia - duplication prohibited
9
9
Virtual Durability Product Development
Complete Exhaust Validation
Vehicle Level
SOR
System Level Low Frequency [Engine load] ~ 20–200 Hz
Very Low Frequency
■
Component Level ■
[Road & Engine loads] ~ 0-20 Hz
Fatigue Life Design 2nd Hyperworks Technology Conference Strasbourg, France. Property of Faurecia - duplication prohibited
Engine Bench Electrodynamics Bench ■
Subsystem Level
■
Exhaust System Key Life Test
Uni (Bi)-axial Force Loading Bench 10
10
Low Frequency Analysis Engine Excitation Load
To evaluate the reacting forces at each hanging point that could induce Structure Borne Noise in the Vehicle or NVH
40µ Culasse Culasse Culasse Culasse
Amplitude m
30µ
X- Order: X- Order: X- Order: X- Order:
1.5 3.0 1.5 3.0
RMS15-Jul-08 RMS15-Jul-08 RMS22-Jul-08 RMS22-Jul-08
09:07:53 09:07:53 22:08:37 22:08:37
20µ
To compute the bending moments, at inlet/outlet of volumes.
To evaluate the stress map for each measuring points for worst resonant Frequencies tuning the structural experimental damping
10µ
0 1k
2k
3k
4k Rotation speed - rpm
K
Static & Dynamic
*
5k
6k
Kx Ky Kz θ K x Kθy K θ z
6.5k
Hanger Force Flex Coupling CS
Bending moment at the I/O of volumes
Isolators K
Static& Dynamic*
Kx Ky Kz
Worst Resonant Frequencies
11
2nd Hyperworks Technology Conference Strasbourg, France. Property of Faurecia - duplication prohibited
11
CS
Low Frequency Analysis Today Well know-how to isolate engine vibrations using standard decoupling elements (Flex coupling & Isolators)
Challenge To know the most accurate dynamic stiffness values by optimization loops to evaluate the reacting forces at each hanging point that could induce NVH
RF3 Z direction
RF3 Z direction 16
60
14 50
12 40
10
AVG 30
ARD ARG CDC
Force (N)
Force (N)
AVD
AVD AVG
8
ARD ARG
6
CDC
20
4 10
2 0
0 30
50
70
90
110
Frequency (Hz)
Without Flex 2nd Hyperworks Technology Conference Strasbourg, France. Property of Faurecia - duplication prohibited
130
150
30
50
70
90
110
130
150
Frequency (Hz)
With Flex
12
12
Size Optimization
13
Size Optimization Target To
minimize hanger force in each direction < 10 N
To
keep lower stress map and bending moments < 100 N*m
To
define optimum values of dynamic stiffness of the flex and isolators.
K
K
Static& Dynamic*
Kx Ky Kz
Static& Dynamic *
Kx Ky Kz θ K x Kθy K θ z
CS
CS
Inputs
2nd Hyperworks Technology Conference Strasbourg, France. Property of Faurecia - duplication prohibited
Engine behavior load (FRF) for critical Eigen values
Temperature map loaded
Damping values are fixed according experimental tuning 14
Decoupling elements dynamic characteristics data base 14
Size Optimization Rear isolator
1st Loop
Front isolator
Flex
Lower bound
Initial values
Upper bound
Optimized values
Kx (N/mm)
500
1000
1500
500
Ky (N/mm)
100 000
200 000
300 000
Kz (N/mm)
100 000
200 000
Kθx (Nmm/rad)
75 e+05
Kθy (Nmm/rad)
400 000
K θz (Nmm/rad)
400 000
Front Isolator
Lower bound
Initial values
Upper bound
Optimized values
Kx (N/mm)
4.8
16
17
17
300 000
Ky (N/mm)
4.8
16
17
17
300 000
100 000
Kz (N/mm)
24
40
41
41
15e+06
225e+05
225e+05
800 000
1 200 000
81 362
Kx (N/mm)
2.4
8
14
14
1 200 000
1.2e+06
Ky (N/mm)
2.4
8
14
14
Kz (N/mm)
12
20
28
12
800 000
2nd Hyperworks Technology Conference Strasbourg, France. Property of Faurecia - duplication prohibited
Rear Isolator
15
15
Size Optimization
16
2nd Hyperworks Technology Conference Strasbourg, France. Property of Faurecia - duplication prohibited
16
Size Optimization Rear isolator
2nd Loop
Front isolator
Flex
Lower bound
Initial values
Upper bound
Optimized values
Kx (N/mm)
100
1000
2000
351
Ky (N/mm)
20 000
200 000
400 000
400 000
Kz (N/mm)
20 000
200 000
400 000
30 585
Kθx (Nmm/rad)
1.5e+06
15e+06
30e+06
30e+06
Kθy (Nmm/rad)
80 000
800 000
1.6e+06
749 512
K θz (Nmm/rad)
80 000
800 000
2nd Hyperworks Technology Conference Strasbourg, France. Property of Faurecia - duplication prohibited
1.6e+06
1.6e+06
Front Isolator
Lower bound
Initial values
Upper bound
Optimized values
Kx (N/mm)
1.6
16
32
32
Ky (N/mm)
1.6
16
32
5.5
Kz (N/mm)
4
40
80
10
Kx (N/mm)
0.8
8
16
14
Ky (N/mm)
0.8
8
16
9
Kz (N/mm)
2
20
40
2
Rear Isolator
17
17
Size Optimization
18
2nd Hyperworks Technology Conference Strasbourg, France. Property of Faurecia - duplication prohibited
18
Size Optimization Max Von Misses stress
With initial values Frequency (Hz)
34
43
61
69.5
109
116.5
141.5
Von Mises stress (MPa)
4.8
6.9
5.6
5.3
10.7
1.5
5.9
With optimized values Frequency (Hz)
35
43
61
68.5
110
116.5
134
Von Mises stress (MPa)
2.8
18.2
3.7
7.1
14.5
7.3
2.9
19
2nd Hyperworks Technology Conference Strasbourg, France. Property of Faurecia - duplication prohibited
19
Summary
Summary Size Optimization approach was developed for Exhaust Systems in Low frequency domain.
An case study was presented here and proved the Size Optimization approach can predict Flex coupling and Isolators dynamic characteristics in the earliest virtual development stage.
The compromise of decreasing hanger forces and keeping lower stress values and bending moments is possible.
The predicted results were correlated reasonably with observed results from Faurecia decoupling elements data base assuring the steadiness of results.
Size Optimization is able to predict dynamic performance of exhaust which 21 enables to avoid the treat of presumptive dynamic stiffness values in order to reach the design targets applying advance mathematical tools like OptiStruct.
2nd Hyperworks Technology Conference Strasbourg, France. Property of Faurecia - duplication prohibited
21
Thank you for your attention. References Mauricio Monteagudo Galindo, Science and Technology Designing Exhaust Systems. SAE 2003 Noise & Vibration Conference, 2003-01-1656.
M. Monteagudo, J. Clavier, T. Lauwagie, J. Strobbe, E. Dascotte, Optimization of the Dynamic Response of a Complete Exhaust System, ISMA2008
OptiStruct, User’s Manual, version 8.
2nd Hyperworks Technology Conference Strasbourg, France. Property of Faurecia - duplication prohibited
Contact Mauricio Monteagudo Galindo R&D Exhaust Durability Manager Faurecia R&D / France. Tel: +(33) 3 81 99 25 63
22
[email protected]
22