Simple filtering – Membrane filtration with rigid body elements
low emissions with high air permeability
utilize the synergies – The GORE® membrane ensures low pressure lost while offering excellent separation.
GORE® SINBRAN® filter is a combination of sintered, porous polyethylene and a laminated GORE® membrane. These combine the strengths of membrane filtration with those of rigid body filtration. The principle of surface filtration and the evenness of the GORE® ePTFE membrane ensure a low loss of pressure while at the same time guaranteeing high separation performance and very low emission values. During filtration, the dust is completely separated at the membrane surface and does not penetrate into the sintered body, so it does not clog up the body of the filter. Cleaning is performed by a powerful pulse of compressed air.
SINBRAN® without dust
SINBRAN® with dust
adaptable and durable
the applications – High reliability and stability in the widest range of applications.
Worldwide, over a million kilometers of GORE® SINBRAN® filters are in use. A service life of more than six years is not unusual.
Comparison of pressure loss over time.
Fields of application:
Convincing arguments in difficult applications
• Shop and cabin extraction systems in welding
When separating non-agglomerating dusts, GORE® SINBRAN® filters guarantee the highest separation rates. Their cleaning capability is even retained below the dew point.
compared to conventional filter
In addition, the high mechanical stability of the material ensures long service life.
Load: 120 m/h
and cutting plants • Pneumatic conveyor and component placement
systems • Process filters and product separators in
spray drying processes
The initially higher pressure loss hoses is significantly improved upon even after a short period of operation.
Test dust: Chalk dust Average grain size: 3.2 µm
• Plants that operate on the CIP (Cleaning-In-
Raw gas dust content: approx. 1 g/m³
Place) principle • Powder coating systems
300
Loss of pressure (daPa)
• Dry filtration systems for wet spray painting lines
250
Conventional rigid body filter Needle felt GORE® SINBRAN® Filter
200 150 100 50 0
0
20
40
60
80
Time (h)
100
120
140
individuality and flexibility
special individual versions –
Filter elements tailored to your requirements. Certain types of application frequently require special installations. For such cases, Gore offers individual solutions tailored to the customer‘s requirements. Development of customized filter elements
Flexible flange versions and sizes
If non-standard geometric dimensions are necessary in a pneumatic conveyor system or a central dust extraction system, for example, Gore will develop a specially adapted or modified GORE® SINBRAN® filter element.
The design of the filter flange guarantees com patibility with existing filter systems. The filter elements are available in almost every flange version from 4 – 18 tubes in series and in any length between 490 mm and 1500 mm. In particularly difficult cases, single cartridges (100 – 1000 mm) with different screw flanges can be used.
For example, single cartridges can be used in series in a filtering system and thus ideally positioned under existing blow tubes.
Particular geometric requirements are implemented in the in-house design and production department.
maximum performance in the tightest space
strong performance and high quality – The advantages of the rigid-body design at a glance.
In comparison with filter hoses, the stable GORE® SINBRAN® rigid body design accommodates a large filter area in the smallest space. In addition, the rigid body gives the filter element great strength. GORE® SINBRAN® is BGIA tested and is suitable for use in dust-removing machines and devices of dust class “M”. The application of dust class “M” produces a degree of permeability of D < 0.1 %, which is more or less comparable to a degree of separation of A > 99.9 % (H12). For explosive dust, GORE® SINBRAN® is also offered in an anti-static version conforming to ATEX (R