Simply

Smarter

Simple to Install • Fast and error-free plug-and-play connections • No complex Class 2 wiring required • No large control cabinets to install or panel schedules to update • Commissioning is not required to meet code: just set the time and date • No special communication cables required

SIMPLY5TM lighting intelligence is built on the premise that controls should be simple for everyone, from the specifier to the contractor to the occupant. It represents an innovative departure from the traditional piecemeal approach to lighting energy management. With conventional systems, designers and installers are faced with trying to meet codes using a wide variety of lighting fixtures, relay panels, dimming systems, occupancy and daylight sensors. The SIMPLY5 approach is different, adding intelligence to highly efficient lighting fixtures and controls components to optimize them for energy management. Because all devices are intelligent, SIMPLY5 automates many setup, calibration and programming tasks which must be performed manually on other systems.

Simple to Design & specify • Meets automated control requirements for ASHRAE, IECC , Title 24 and EPAct • No relay or dimmer cabinet schedules to complete • Lays out similarly to ordinary line voltage manual switching • No occupancy sensor layouts required

Maximize Energy Savings

Simply

Better 2

SIMPLY5 lighting intelligence maximizes lighting energy savings by first lowering the base consumption. It then distributes intelligent controls, enabling the easy incorporation of one or more timeclock, occupant or daylight-based automated controls. Finally, fully integrated load shed capabilities empower the property owner to take full advantage of EPAct mandated real-time energy pricing and manage their own energy consumption while complying with utility incentives.

Simple to Use • Intuitive interface allows occupants to easily adjust the light level for the task at hand; as low as 3% for AV presentations • Seven specific dimming levels available; 85 levels available for load shedding • Automatically adapts to occupant schedule changes

Simple to Expand • Switches, occupancy sensors and photocells may be added for automated time-clock control, occupancy sensing and daylight harvesting • System may be scaled post-installation to accomodate areas as small as a single room or as large as a multi-building campus • Components may be easily reconfigured to accommodate changes

Simple to Maintain • SYLVANIA QUICKTRONICTM multi-step electronic ballasts with program-start features maximize lamp life • Adaptive electronics stay calibrated without manual adjustment • Commissioning is not necessary when adding or replacing components • Adaptive scheduling accommodates occupants’ usage automatically without reprogramming

Gain Flexibility With SIMPLY5, changes to the use of a building no longer require reprogramming or recommissioning of the control system. The integrated plug-and-play control elements make the system flexible and easy to reconfigure, as components can be added or removed at any time. Additionally, with local dimming and override controls, occupants have the power to create their personal environment.

3

Efficient Lighting Fixtures • Low power density easily achieved • SYLVANIA offers SIMPLY5 smart ballast technology • 7 preset user levels from 100% to 3% • Contractor friendly design

4

Intelligent Junction Box • Coordinates lighting demand • Routes power for room • Communicates with light energy manager

Simple Wall Controls

• Intuitive user interface • Easily gangable for multi-zone control • Low-voltage device • Class 1 or Class 2 wiring • Architectural finish

Flexible RELOC® Wiring • Reduces overall labor cost • Includes all power and control wiring • Offers plug and play technology

Light Energy Manager • Controls up to 42 lighting circuits • Adaptive timeclock • Interfaces with building automation • On-board modem • Enables advanced system features

Sensor Connector

• Use to connect lowvoltage photocell and/or occupancy sensors • Includes Tee connector for easy configuration at any junction point • Auto-configuration with intelligent junction box

Simply

Intelligent The advantage of Distributed Intelligence

Current systems are difficult to work with because they address energy management strictly from a controls viewpoint. This limits the ability to envision a more integrated and flexible design. SIMPLY5 lighting intelligence functions as a whole system, adding intelligence to highly efficient lighting fixtures and controls components. The result is a complete solution that is easy for everyone.

5

Simply

Superior

SIMPLY5 Lighting Intelligence vs. Other Traditional Controls Technologies

Traditional Control Technologies

SIMPLY5 Technology

Zone Wiring

Each zone requires homerun wiring back to the relay panel

Connect zone at any point on circuit; no independent homerun required

Low-voltage and Line-voltage Wiring

Low-voltage wiring must be kept separate from line voltage

All control and line-voltage wiring in one easy connector

Adding Components

Adding photocell and/or occupancy sensors requires additional addressing and wiring

Tee connectors allow easy connection of photocells & occupancy sensors in any zone

Time-clock Capabilities

Time-clock schedules must be manually programmed

Time clock automatically adapts to occupant usage for each room

Programming Required

All controls must be programmed/ commissioned before they will function

Plug-and-play controls work as soon as they are connected

TRADITIONAL CONTROL TECHNOLOGY

151 Electrical Connections 1000 ft #18 Wire by Contractor 650 ft #12 Wire by Contractor 220 ft Conduit by Contractor

Relay Panel

Light Energy Manager

Breaker Panel

SIMPLY5TM lighting intelligence technology is enabled in the following brands and products: 6

Breaker Panel



71 Electrical Connections 75 ft #18 Wire by Contractor 50 ft #12 Wire by Contractor 20 ft Conduit by Contractor

ENERGY SAVINGS BASED ON TOTAL ENERGY USED BY OFFICE LIGHTING (OFFICE LIGHTING ACCOUNTS FOR 44% OF TOTAL BUILDING ENERGY)

Below is a chart of typical lighting energy usage in an office environment. This chart displays the percentage decrease of energy usage when the space has been optimized with SIMPLY5 components. 100%

33%

0%

SAV

0%

ENE R SAV GY INGS

51%

ENE R SAV GY INGS

66%

ENE R SAV GY INGS

INGS

PARABOLIC RT5 FIXTURES FIXTURES ONLY

RT5 WITH RT5 WITH SIMPLY5 SIMPLY5 TIMECLOCK TIMECLOCK, OCCUPANCY SENSORS AND PHOTOCELLS

Energy Savings Made Simple

Cost-effective

solution to lighting energy management Components

SIMPLY5

Occupancy Sensors

Relay System

Dimming System

Fixture Type

RT5

RT5

RT5

RT5

Fixture Cost

$24,027 *

$19,180

$19,180

$19,180

Dimming Ballast Adder

$3,866

N/A

$1,556

$10,863

Connection Type

RELOC ®

Hardwire

Hardwire

Hardwire

Wiring Connections

615

1528

1208

1148

Wiring Matrerial Cost

$983

$1,209

$2,417

$2,918

Controls Equipment

$11,280

$6,317

$20,031

$26,271

System Commissioning

$0

$0

$2,055

$3,014

Typical Labor

26hrs

73 hrs

49hrs

46hrs

Labor Cost **

$1,560

$4,380

$2,940

$2,760

Total

$41,716

$31,086

$48,179

$65,006

* SIMPLY5 fixtures include RELOC® connectors

** Based on $60/hr; may vary by region.

In this comparison, the occupancy sensor system provides the occupants simple on/off manual control, relay system provides bi-level control, and the dimming system provides full-range (100% - 5%) dimming of the lights. In all cases, public areas such as corridors are on/off control only.

In today’s office building environment, lighting can demand up to 44% of the overall building energy usage. As a result, both federal and state energy codes mandate the use of manual and/or automated control technologies. SIMPLY5 lighting intelligence helps specifiers and owners meet these stringent energy code requirements more efficiently and effectively. Scalable components and system architecture enable flexible energy savings for most large and small projects.Through adaptive scheduling, SIMPLY5 helps optimize the energy savings by automatically adapting, configuring and adjusting to each room’s schedule.

7

One Lithonia Way Conyers, GA 30012 TEL 888.888.0002

FAX 770.918.1209

www.SIMPLY5.net

© 2007 Acuity Brands Lighting, Inc. 05/07 ABL6803 Form No. 763.21