SIMATIC HMI. Hotfix 1 (K ) zu WinCC V7.0 SP1. Installations- und Benutzungshinweise. Inhaltsverzeichnis

SIMATIC HMI Hotfix 1 (K7.0.1.1) zu WinCC V7.0 SP1 Installations- und Benutzungshinweise Diese Hinweise sind den Aussagen in den Handbüchern und in de...
Author: Birgit Brauer
12 downloads 1 Views 105KB Size
SIMATIC HMI Hotfix 1 (K7.0.1.1) zu WinCC V7.0 SP1 Installations- und Benutzungshinweise

Diese Hinweise sind den Aussagen in den Handbüchern und in der Online-Hilfe in der Verbindlichkeit übergeordnet. Bitte lesen Sie die Hinweise sorgfältig durch, da für Sie wichtige Informationen für die Installation und Nutzung von Hotfix 1 zu WinCC V7.0 SP1 enthalten sind.

Inhaltsverzeichnis 1 1.1 1.2 1.3 1.4 1.4.1 1.4.2 1.4.3

Installationshinweise Lieferumfang Hardware-Voraussetzungen Software-Voraussetzungen Installation Installation von Hotfix 1 zu WinCC V7.0 SP1 Deinstallation von Hotfix 1 für WinCC V7.0 SP1 Zusätzliche Informationen zu den Optionen von WinCC V7.0 SP1

2 2.1 2.1.1

Benutzungshinweise (Release Notes) Neuerungen und Änderungen gegenüber früheren Versionen Was ist geändert gegenüber der Version WinCC V7.0 SP1?

Copyright © Siemens AG 2009 Rights Reserved 06/2009, A5E02600099-01

1

1

Installationshinweise Die Installationshinweise enthalten wichtige Informationen, die Sie für die Installation des Hotfix benötigen. Lesen Sie diese Hinweise vor der Installation.

1.1

Lieferumfang Der Lieferumfang des Pakets umfasst: Hotfix 1 (K7.0.1.1) für das Softwarepaket WinCC V7.0 SP1. Dieses Hotfix enthält alle Korrekturen, die in Patches für V7.0 SP1 freigegeben wurden.

1.2

Hardware-Voraussetzungen Keine Änderung gegenüber WinCC V7.0 SP1.

1.3

Software-Voraussetzungen WinCC V7.0 SP1 oder mindestens eine Option von WinCC V7.0 SP1.

1.4

Installation

1.4.1

Installation von Hotfix 1 zu WinCC V7.0 SP1 Voraussetzung für die Installation dieses Hotfix ist eine bereits installierte Version WinCC V7.0 SP1 oder mindestens eine Option von WinCC V7.0 SP1. Beenden Sie alle Applikationen (z. B. WinCC-RT, MS-Word usw.) vor dem Setup-Start. Das Hotfix besteht aus einer selbstextrahierenden Datei. Entpacken Sie die EXE-Datei auf Ihre Festplatte und doppelklicken Sie auf die Datei Setup.exe. Das Setup-Programm führt Sie durch die gesamte Installation. Nach der Installation ist abhängig von der Systemkonfiguration ein Neustart erforderlich. Wird während des Setup, nachdem Sie die Bedingungen zur Lizenzvereinbarung akzeptiert haben, die Taste "Weiter" nicht aktiv geschaltet, können Sie das Setup abbrechen. Es ist keine Aktualisierung der installierten Komponenten notwendig. Wenn Sie eine Nachinstallation von der Liefer-DVD durchgeführt haben, müssen Sie das Hotfix erneut installieren.

1.4.2

Deinstallation von Hotfix 1 für WinCC V7.0 SP1 Eine Deinstallation des Hotfix ist nicht möglich.

1.4.3

Zusätzliche Informationen zu den Optionen von WinCC V7.0 SP1 Wenn Sie Optionen von der Liefer-DVD nachinstallieren, müssen Sie für diese Optionen das Hotfix erneut installieren. Die folgenden Optionen können Sie dagegen direkt mit dem Hotfix-Setup installieren: - WebNavigator Client - DataMonitor Client - Connectivity Pack Server

2

Copyright © Siemens AG 2009 Rights Reserved 06/2009, A5E02600099-01

2

Benutzungshinweise (Release Notes) Diese Hinweise sind den Aussagen in den Handbüchern und in der Online-Hilfe in der Verbindlichkeit übergeordnet. Wenn Sie den WinCC WebNavigator zusammen mit APC/BPC einsetzen, dann starten Sie nach der Hotfix-Installation nochmals den WinCC Web Configurator. Publizieren Sie alle Prozessbilder mit Faceplate-Typen nochmals, nachdem Sie das Hotfix installiert haben.

2.1

Neuerungen und Änderungen gegenüber früheren Versionen

2.1.1

Was ist geändert gegenüber der Version WinCC V7.0 SP1? WinCC Basic • Erfassung von Archivvariablen: - Archivierung von umprojektierten Archivvariablen wurde verbessert. • ODK-Funktion MSRTGetSelectedMsg(): - Zeitstempel werden einheitlich ausgegeben. • Redundante Serverpaare: - Optimierung des Meldestatus. • Bildwechsel in Runtime: - Verbesserung des Bildwechsels über Hotkeys. • Statuszeile im Runtime-Fenster: - Aktualisierung der Statuszeile im Runtime-Fenster verbessert. • Installation von WinCC V7: - Lizenzfehlermeldung nach Installation von WinCC V7.0 SP1 entfernt. • SIMATIC Net Lean Lizenz: - SIMATIC Net Lean Lizenzen auf dem Lizenz-Datenträger aktualisiert. • Faceplate-Aktualisierung am Web-Client: Verbesserte Faceplate-Aktualisierung am Web-Client. • Autostart der Software: - Verbesserung beim Autostart der Software. • Anzeige des WinCC_WB.ocx am Web-Client: - WinCC_WB.ocx für Web-Client V7.0 verbessert. • Darstellung von WMF-Bildern: - Darstellung von WMF-Bildern wurde verbessert. WinCC-Kanäle • Beenden von Runtime: - Verbessertes Verhalten beim Beenden von Runtime. • Kommunikationskanal für Allen Bradley Control: - Ladevorgang des Kommunikationskanals für Allen Bradley Controls verbessert. WinCC WebNavigator • Faceplate-Darstellung am Web-Client: - Aktualisierung der Faceplate-Farbe am Web-Client verbessert. • Öffnen von Faceplates am Web-Client: - Öffnen von Faceplates am Web-Client verbessert.

Copyright © Siemens AG 2009 Rights Reserved 06/2009, A5E02600099-01

3

SIMATIC HMI Hotfix 1 (K7.0.1.1) to WinCC V7.0 SP1 Notes for installation and use

These notes have priority over those in the manuals and online help with regard to legal validity. Please read these notes carefully, they contain important information on installing and using Hotfix 1 for WinCC V7.0 SP1.

Table of contents

4

1 1.1 1.2 1.3 1.4 1.4.1 1.4.2 1.4.3

Notes on installation Scope of delivery Hardware requirements Software requirements Installation Installation of Hotfix 1 for WinCC V7.0 SP1 Uninstallation of Hotfix 1 for WinCC V7.0 SP1 Additional information on the options of WinCC V7.0 SP1

2 2.1 2.1.1

Release notes Improvements and modifications regarding earlier versions What is new compared to WinCC V7.0 SP1?

Copyright © Siemens AG 2009 Rights Reserved 06/2009, A5E02600099-01

1

Notes on installation The installation notes contain important information which you require for installing the Hotfix. Please read these notes before you start the installation.

1.1

Scope of delivery The scope of supply of this package includes: Hotfix 1 (K7.0.1.1) for software package WinCC V7.0 SP1. This Hotfix includes all corrections that were released as patches for V7.0 SP1.

1.2

Hardware requirements No changes compared to WinCC V7.0 SP1.

1.3

Software requirements WinCC V7.0 SP1 or at least one option of WinCC V7.0 SP1.

1.4

Installation

1.4.1

Installation of Hotfix 1 for WinCC V7.0 SP1 Requirement for the installation of this hotfix is an installed version of WinCC V7.0 SP1 or at least one option of WinCC V7.0 SP1. Exit all applications (for example WinCC-RT, MS-Word, etc.) before you start the setup. The Hotfix consists of a self-extracting file. Unpack the EXE file to your hard disk by double-clicking the Setup.exe file. The Setup program guides you through the entire installation. After installation is complete, you might need to restart the system. You can cancel the setup if the "Next" button is not activated during setup and after you have accepted the licensing conditions. An update of the installed components is not necessary. You will have to install the Hotfix once again if you have done a re-installation from the supplied DVD.

1.4.2

Uninstallation of Hotfix 1 for WinCC V7.0 SP1 Uninstallation of the Hotfix is not possible.

1.4.3

Additional information on the options of WinCC V7.0 SP1 If you want to install options from the supplied DVD at a later time, you will have to reinstall the Hotfix for these options. You can install the following options directly with the Hotfix setup: - WebNavigator Client - DataMonitor Client - Connectivity Pack Server

Copyright © Siemens AG 2009 Rights Reserved 06/2009, A5E02600099-01

5

2

Release notes These notes have priority over those in the manuals and online help with regard to legal validity. If you are using the WinCC WebNavigator along with the APC/BPC, you will have to start the WinCC Web Configurator after installation of the Hotfix. Publish all process images with faceplate types once again after you have installed the Hotfix.

2.1

Improvements and modifications regarding earlier versions

2.1.1

What is new compared to WinCC V7.0 SP1? WinCC Basic • Detection of archive tags: - Archiving of reconfigured archive tags has been improved. • ODK function MSRTGetSelectedMsg(): - Time stamps will be issued uniformly. • Redundant server pairs: - The message status is optimized • Picture changes in Runtime: - Improved picture changes via hotkeys • Status bar in Runtime window: - Improved update of status bar in Runtime window. • Installation of WinCC V7: - License error message after installation of WinCC V7.0 SP1 removed. • SIMATIC Net Lean license: - SIMATIC Net Lean licenses updated on the license data storage medium. • Faceplate update on the Web Client: Improved faceplate update on the Web Client. • Autostart of software: - Improved autostart of software • Display of WinCC_WB.ocx on Web client: - WinCC_WB.ocx for Web client V7.0 has been improved. • Representation of WMF images: - Representation of WMF images has been improved. WinCC Channels • Exiting Runtime: - Improved behavior when exiting Runtime. • Communication channel for Allen Bradley Control: - Improved upload process of communication channel for Allen Bradley Controls. WinCC WebNavigator • Faceplate representation on the Web client: - Improved update of faceplate color on Web client. • Opening of faceplates on Web client: - Opening of faceplates on Web client has been improved.

6

Copyright © Siemens AG 2009 Rights Reserved 06/2009, A5E02600099-01

Suggest Documents