Shiftworks ® products are made in the USA
NEW PRODUCTS
Neutral Safety & Back-up Switch Re-Location Conversion 3-speed and 4-speed Automatics 1969-81 Pontiacs and 1973-81 Chevy’s y Does your shifter look like this? ? GM used a rod linkage from the transmission to operate the neutral safety and back-up switch located on the column for many of its center console equipped cars. Headers and OverDrives and many owners have in many cases lost or caused to be lost this valuable safety item. We know, we got the calls. So finally here is a solution. You can now put it on the shifter where it belongs.
For all TH350 and TH400 #SW652 $49.50
Use Column switch for 1968 Firebird. Switch not included.
For all OverDrive applications using SHIFTWORKS® shifter conversion #SW653 $94.50 Switch IS included.
2
www.shiftworks.com
Dust Boots for SHIFTWORKS® Trans-stormer Shifter. These boots will help keep dust and dirt away from the shifter and out of your car. Available for both the 67 Camaro style and the Universal shifter bodies.
Molded ABS Plastic. Universal on Left and 67 Camaro style on Right. #SW280-155 Universal Body $24.50 #SW280-251 Camaro Body $24.50
4L60E, 4L65E, 4L70E & 4L80E
Our 4LX fix-it kits resolve rod linkage conflicts with the electric neutral safety/backup light switch located on the exterior of the transmission and for cable applications straighten out the cable alignment if the transmission has the long Range-Select lever.
4LE Rod Linkage fix-it 4LE-C Cable fix-it kit
$18.50 $18.50
Use with the non-E overdrive conversion for your car.
4LE Rod Linkage fix-it
4LE-C Cable fix-it kit
www.shiftworks.com
3
1964-67 CHEVELLE
Powerglide Shif Shifter Conversion Kit The purpose of this kit k is to allow the use of the 1964-67 factory installed cons console shifter when the Powerglide transmission is re replaced with a newer 3-speed (TH350 or TH400) or 4-speed overdrive (TH700-R4, 4L60 or TH200-4R) transmission. This kit eliminates the rod linkage cable #K100. Kit includes cable. and replaces it our ca
1964-65 CHEVELLE #SC2031-C TH350, TH400 #SC2041-C TH700-R4, TH200-4R, or 4L60
As Installed
$175.00 $175.00
1966-67 CHEVELLE
#SC2031-C
#SC2032-C TH350, TH400 #SC2042-C TH700-R4, TH200-4R, or 4L60
$175.00 $175.00
1964-67 CHEVELLE #S500*
1965-67 Backup and Safety Switch
$52.50
*Recommended for all conversions.
#S502 As Installed
#SC2042-C
#4160 #S501 #S530 #S531
1966-67 Console Lens Bezel Button Button Spring TH350 Kickdown Cable TH350 Kickdown Bracket (Small Block)
$75.00 $12.50 $4.50 $44.50 $12.50
1964-67 POWERGLIDE PARTS #S502
4
#S500
www.shiftworks.com
#SW421 #SW419
Rod Linkage Trans. Select Lever
$41.00 $42.00
1964 IMPALA
Powerglide Shifter Conversion Kit The purpose of this kit is to allow the use of the 1964 factory installed console shifter when the Powerglide transmission is replaced with a newer 3-speed (TH350 or TH400) or 4-speed overdrive (TH700-R4, 4L60 or TH200-4R) transmission. This kit eliminates the rod linkage and replaces it with our cable #K100. Kit includes cable.
1964 IMPALA #SC2051-C TH350, TH400 #SC2061-C TH700-R4, TH200-4R, or 4L60 #S500* Back-Up & Safety Switch
$175.00 $175.00 $52.50
*Recommended for all conversions.
#S530 #S531 #4160 #S501
TH350 Kickdown Cable $44.50 Kickdown Bracket (Small Block) $12.50 Button $12.50 Button Spring $4.50
#SC2051-C
#S500
#SC2061-C
#S530
#S531
#S501
#4160
www.shiftworks.com
5
1965-67 NOVA & IMPALA Powerglide Shifter Conversion Kit Use your factory-installed console shifter when the Powerglide transmission is replaced with a newer 3-speed (TH350 or TH400) or 4-speed overdrive (TH700-R4, TH200 4R, or 4L60) transmission. This kit retains the rod linkage.
#S1031
As Installed
1965-67 NOVA #S1031 #S1041 #4160 #S501
TH350, TH400 TH700-R4, TH200-4R, or 4L60 Shifter Release Button Release/Spring Button
$57.75 $57.75 $12.50 $4.50
1965 IMPALA #S1042
As Installed
#S103 #2441 #S1043
TH350, TH400 3-Speed Lens TH700-R4, TH200-4R, or 4L60
$47.25 $49.50 $57.75
1966-67 IMPALA #S103 #2592 #S1042
TH350, TH400 3-Speed Lens TH700-R4, TH200-4R, or 4L60
$47.25 $39.50 $57.75
1965-67 NEUTRAL SAFETY AND BACK-UP SWITCH #2441
#2592
#S500*
$52.50
*Recommended for all conversions.
Rod Linkage #SW423 #SW425 #SW427 #SW431 #SW404
65-67 Impala PG & TH350 65-67 Impala TH400 65-67 Nova 65-67 Nova (O.D.) Swivel Kit #SW425 pictured
6
www.shiftworks.com
$42.00 $58.00 $41.00 $41.00 $9.50
1967 CAMARO & FIREBIRD, 1968-72 NOVA Shifter Conversion Kit The purpose of this kit is to allow the use of the factory installed automatic floor shifter when the transmission is replaced with a newer 3-speed (TH350 or TH400) or 4-speed overdrive (TH700-R4 or TH200-4R) transmission. This kit retains the rod linkage. #S105A #S105B #SW429 #SW404 #S530 #S531 #6724 #S501 #S504 #S636 #S635 #SW442 #SW443 #SW441 #SW435 #S519
#S635
TH350, TH400 TH200-4R, TH700-R4, 4L60 67 Rod Linkage with swivel Swivel Kit TH350 Kickdown Cable Kickdown Bracket (Small Block) Shifter Release Button Release Button Spring Plastic (Delrin) Bushings Flexi-Rod (inside handle) NSS & Back-up Light Lever Bottom Spring Bottom Spring (cotter pin style) Main Shaft Washers 1968-72 Nova TH Rod Linkage Neutral Safety/Back-up Switch
$57.75 $57.75 $41.00 $9.50 $22.50 $12.50 $12.50 $4.50 $12.75 $68.50 $15.25 $4.50 $4.50 $6.50 $63.50 $38.50
#S504
#S105A
#S519
#SW435
#S636
www.shiftworks.com
7
1968-72 CHEVELLE, CAMARO, IMPALA & MONTE CARLO 3-Speed Installations All 1968-72 factory “Horseshoe” style shifters have a universal detent for both 2-speed and 3-speed automatic transmissions. They also use the same cable. However, these models do require a cable installation kit when swapping out a Powerglide transmission for a TH350 or TH400, or when installing a factory console shifter in car originally equipped as a column shift.
NEW!! 3-Speed Detent Good for replacing a worn or damaged unit and for Reverse Valve Bodies too. #S640 #S150 #S151 #S152 #C351
#S640 #S64 #S 6400
3-Speed Detent 68-69 Camaro RVB Lens 68-70 Chevelle RVB Lens 71-72 Chevelle RVB Lens
$30.00 $19.50 $19.50 $19.50
1968-72 CAMARO, CHEVELLE, IMPALA, & MONTE CARLO Universal Kit #C351
(All Models) TH350, TH400
$35.00
1968 CHEVELLE,1968-69 CAMARO #C401
#C401 #C354
TH400 GM Factory Parts TH350
$45.00 $42.00
1969-72 CHEVELLE, 1970-72 CAMARO, 1968-72 IMPALA
#C3511
#C3511 #C402 #4582 #4584 #S530 #S531
TH350, TH400 TH400 GM Factory Parts 1968-70 3-speed Lens 1971-72 3-speed Lens TH350 Kickdown Cable TH350 Kickdown Bracket (Small Block)
See Cables 8
www.shiftworks.com
$40.00 $45.00 $15.75 $15.75 $22.50 $12.50
1968-72 CHEVELLE, CAMARO, IMPALA & MONTE CARLO 3-Speed Ratchet Shift Detent A new Thomson Performance product. This detent will enable positive shifts from low to drive. #DT3 Powerglide, TH350, TH400 $75.00 $75.00 #DT4* GM Overdrives
#DT3
#DT4
DT4 MUST be used with a SHIFTWORKS® overdrive conversion kit series SC224X.
4-Speed Overdrive Kit 1968-69 CAMARO #SC2244
TH700-R4, TH200-4R, 4L60
#SC2244
$89.25
1970-72 CAMARO #SC2245
TH700-R4, TH200-4R, 4L60
$89.25
1968-72 IMPALA (No Lens) #SC2240
TH700-R4, TH200-4R, 4L60
68-69
$78.75
70-72 As Installed – Camaro
1968 CHEVELLE #SC2241
TH700-R4, TH200-4R, 4L60
$89.25
1969-70 CHEVELLE #SC2242
TH700-R4, TH200-4R, 4L60
$89.25
#SC2243
1971-72 CHEVELLE #SC2243
TH700-R4, TH200-4R, 4L60
$89.25
CABLES #C100 #K100 #S532
Shifter Cable (GM #3956765) Shifter Cable Retainer
#C100
$100.00 $74.50 $4.50
(clips cable to shifter handle)
See our video on cables: www.shiftworks.com/video/cable.htm
RVB Lens #S151
#K100
www.shiftworks.com
9
1968-1969 FIREBIRD & GTO 3-Speed Installations The 1968-69 Firebird Powerglide (2-speed) shifter can be used with the TH350 or TH400 (3-speed) transmission without modification. The only difference in the factory shifter detent is an additional hard stop for 2nd gear, not present with the 2-speed detent. This stop is unnecessary. #C352 #C353 #C101 #C101 #K100
1968-69 Firebird TH350 1968-69 Firebird TH400 Shifter Cable (GM #498467) Shifter Cable (GM #498467) Shifter Cable
$36.75 $36.75 $114.75 $74.50 $74.50
#C352
1968-81 FIREBIRD, GTO, & LE MANS, 1973-81 CAMARO 4-Speed Overdrive Kit The purpose of this kit is to allow the use of the factory installed shifter when installing a newer overdrive transmission. The kit includes a new laser cut and hardened detent, and all hardware and brackets are included to allow use of the original cable.
1973-78 CAMARO #SC2261
TH700-R4, TH200-4R, or 4L60
$89.25
1968 FIREBIRD #2262-8
#SC2262
TH700-R4, TH200-4R, or 4L60
$89.25
1979-81 CAMARO, 1969-81 FIREBIRD, 1968-75 GTO & LE MANS
As Installed
10
As Installed 73-78 Camaro
www.shiftworks.com
#SC2262
TH700-R4, TH200-4R, or 4L60
#C101 #K100
Shifter Cable (GM #498467) Shifter Cable
$89.25 $114.75 $74.50
1965-67 CORVETTE Shifter Conversion Kit The purpose of this kit is to allow the use of the factory installed automatic shifter when the transmission is replaced with a newer 3-speed (TH350 or TH400) or 4-speed overdrive (TH700-R4, 4L60, or TH200-4R) transmission. The kit retains the rod linkage. #SC2405
1965-67
$84.50
A new laser cut, die stamped aluminum console insert with black anodized letters for the above kit. #S141 #S142
#S141
#S142
Console Insert (TH350/400) Console Insert (Overdrive)
$44.50 $44.50
#SC2405
1968-81 CORVETTE Shifter Conversion Kit This kit enables the use of the factory installed shifter when installing a newer overdrive transmission, such as the TH200-4R, TH700-R4, and the 4L60. The kit includes a new laser cut and hardened detent, and all hardware and brackets are included to allow use of the original cable. Also included is an overdrive console lens adapter.
1968-71 1972-76 1977-81
$94.50 $94.50 $94.50
GM Cables #C103 1968-76 #C102 1977-81
$90.00 $120.00
#SC2401 #SC2402 #SC2403
Lens Indicator Adapters L to R: 68-71, 72-76, 77-81
www.shiftworks.com
11
1964-65 GTO & LE MANS Use your factory-installed facttory2-speed shifter to retain the original replacing the Powerglide transmission with a newer appearance when w 3-speed (TH350 (TH3 350 or TH400) or 4-speed overdrive (TH700-R4, TH200This kit eliminates the rod linkage and 4R, or 4L60) transmission. tran replaces it with with a cable. Kits include new cable. #SC2152 TH350 & TH400 #SC2162 TH700-R4, TH200-4R or 4L60
$175.00 $175.00
As Installed #SC2152
1966-67 1966 67 GTO & LE MANS This kit allows the use of the factory 2-speed shifter when w converting to a fully functional 3-speed shifter with installation of a new 3 TH350, TH400, TH200-4R, TH700-R4, or 4L60 transmission. Kits require use of our cable #K100. (sold separately). #SC2101
TH350
$104.00
#SC2102
TH400
$104.00
#SC2121
TH700-R4, TH200-4R, or 4L60
$104.00
#K100
#SC2101
12
www.shiftworks.com
Shifter Cable
$74.50
DUAL GATE SHIFTERS Use the original His & Hers Shifter with a new w 3-speed (TH350 or TH400) or 4-speed overdrive (TH700-R4, TH200-4R, or 4L60) transmission. Kits include all necessary hardware for installation.
1967-68 GTO #C362 #C363 #C361 #C101 #K100
TH400 TH350 TH700-R4, TH200-4R, or 4L60 Shifter Cable (GM #498467) Shifter Cable
$36.75 $36.75 $42.00 $114.75 $74.50
1970-72 442 #C371
TH700-R4, TH200-R4, or 4L60 (includes cable)
$110.00
The overdrive conversion puts overdrive in a neutral position. Low, second, and drive are normally located.
#C361
442
#C371
www.shiftworks.com
13
1967-72 CUTLASS Shifter Co Conversion Kit Use your facto factory-installed automatic floor shifter with a newer 3-speed (TH350 or TH400) or a newer 4-speed (TH700-R4, TH TH200-4R, or 4L60) transmission.
1967-69 CUTLASS #SC2302
TH350 & TH400
$150.00
1967-72 CUTLASS #SC2312
#SC2312
TH700-R4, TH200-4R, or 4L60
$150.00
#SC2302
1964-66 CUTLASS Shifter Conver Conversion Kit The purpose of this kit is to allow the use shifte and console when the of the factory shifter 2-speed transmission is replaced with a TH350 or TH400 3-speed or a newer 4-speed (TH700-R4, TH200-4R, or 4L60) transmission. This kit eliminates the Rod Linkage and replaces it with a cable.
1965-66 CUTLASS #SC2320 #SC2322
#SC2322
14
www.shiftworks.com
TH350 & TH400 TH700-R4, TH200-4R or 4L60
$135.00
$135.00
1968-72 BUICK 4-Speed Overdrive Kit Use your factory-installed automatic tomatic floor shifter with a newer 4-speed (TH700-R4, TH200-4R, or 4L60) transmission. The conversionn includes a new laser cut and hardened detent for proper stops and gear ansmission shift lever, selection, a new matching transmission ns indicator (68-69 only), cable pan bracket, console lens dware, and instructions. new cable, all necessary hardware,
1968-72 BUICK #SC2072
TH700-R4, 60 $150.00 TH200-4R, or 4L60 As Installed (’68-’69)
#SC2072
1964-66 1964 66 BUICK 4-Speed Overdrive Kit Use your factory-installed automatic floor shifter with a newer 3-speed (TH350, TH400) or 4-speed (TH700-R-4, TH200-4R or 4L60) transmission. The conversion includes a new laser cut and hardened detent for proper stops and gear selection, a new matching transmission shift lever, cable pan bracket, new cable, all necessary hardware, and instructions. #SC2082 TH350, TH400 $150.00 #SC2092 TH200-4R, TH700-R4 or 4L60 $150.00
#SC2322
#SC2082
#SC2092
www.shiftworks.com
15
COLUMN SHIFT CONVERSIONS Transmission Shift Arm Connection Kit For column shifters TH350, TH400, TH200-4R, TH700R4, 4L60, 4L80. The Kugel Komponents Kit connects the column or floor shifter to most GM transmissions. It also allows for gear pointer alignment. A splined adapter button allows the arm to be positioned at any angle. A slot positions to pivot joint for longer or shorter sweep and pointer alignment. The rod assembly is 17” – 23 1/2” pivot to pivot. #KK02
Column Shift Linkage
$45.00
#KK02
Do you have a: 4L60E, 4L70E, or 4L80E with the neutral safety switch on the outside? Then you will need out 4LE Fix it kit. This allows you to connect the linkage and not have any conflicts with the switch. $18.50
#4LE Kit
#4LE KIT
16
www.shiftworks.com
COLUMN SHIFT CONVERSIONS Column Lens Indicators
1962-65 NOVA, 1961-64 IMPALA, 1964-65 CHEVELLE & GTO/TEMPEST
#S138 & S139
#S138 #S139
Indicator (TH) Indicator (OD)
$19.50 $19.50
1967 NOVA & 1967-68 CAMARO #S143 #S144
#S143 & S144
Indicator (TH) Indicator (OD)
$19.50 $19.50
1966 NOVA #S153 #S154
Indicator TH Indicator OD
#S153
$19.50 $19.50
#S154
1968-74 NOVA #S155 #S156
Indicator TH Indicator OD
$19.50 $19.50 #S153 AS INSTALLED
#S155
#S156
1968 & 1969 CHEVELLE
#S145 #S146 #S147 #S148
These cleverly designed adaptors fit over the existing raised letter indicators for a permanent and factory appearing solution at an affordable cost. 68 Chevelle TH 3-speed $19.50 68 Chevelle OD 4-speed $19.50 69 Chevelle TH 3-speed $19.50 69 Chevelle OD 4-speed $19.50
#S146 AS INSTALLED
1970-1972 MALIBU SWEEP DASH #S157
Indicator OD
$19.50 www.shiftworks.com
17
1966-67 CHEVELLE & NOVA SS GAUGE CONVERSIONS
Super Sport Gauge Conversion This new SHIFTWORKS® conversion kit will allow anyone with the standard Chevelle or Nova in-dash gauges to convert to the Super Sport style gauge package. #S505
Use the voltmeter with one-wire alternators and non-GM wiring.
These gauges are designed to fit into the EXISTING openings in the back of the dash. They include the Temperature sensing device and the mechanical Oil Pressure line and fittings. An ammeter is standard, as was used by GM.
1966-67 CHEVELLE #S505 SS Gauges Kit with Ammeter $205.00 #S505-V SS Gauges Kit with Voltmeter $205.00 #S505-ADP Adaptors For Shiftworks® Gauges In Factory SS Dash $25.00
1966-67 NOVA #S507-V
SS Gauges Kit with Voltmeter $205.00
HIGH OIL PRESSURE?
#S507-V
18
www.shiftworks.com
Midrange for the HOP series is 60 pounds, versus the normal 30 pounds oil pressure gauge. The upper scale of the HOP series oil pressure gauge is 100+ pounds. #S505-HOP $215.00 #S505-VHOP $215.00 #S507-HOP $215.00
CHEVELLE IN-DASH TACHOMETER CONVERSIONS In-Dash Tachometer SHIFTWORKS® is now offering In-Dash Tachometer conversions. Replaces the clock with a 7000 RPM TACH. This is a Two-For. Get rid of that “Tachy” steering column appendage AND that broken clock. All SHIFTWORKS® In-Dash Tachs are engineered to fit into EXISTING dash openings and are designed with a factory look. #S510-1 Installed
1964-65 CHEVELLE #S510-1
1964-65 Chevelle In-Dash Tachometer
$139.50
1968 CHEVELLE #S512
1968 Chevelle In-Dash Tachometer
$139.50
#S510-1
#S512 #S512 Installed
1968 CHEVELLE IN-DASH TACHOMETER AND GAUGES #S508-VT Gauges Conversion with Tachometer Replaces Idiot Lights
Before
$325.00
After
www.shiftworks.com
19
CHEVELLE IN-DASH TACHOMETER CONVERSIONS
In-Dash Tachometer SHIFTWORKS® is now offering In-Dash Tachometer conversions. Replaces the clock with a 7000 RPM TACH. This is a Two-For. Get rid of that “Tachy” steering column appendage AND that broken clock.
#S513 Installed
All SHIFTWORKS® In-Dash Tachs are engineered to fit into EXISTING dash openings and are designed with a factory look.
1969 CHEVELLE #S513 #S513
1969 Chevelle In-Dash Tachometer
$134.50
#S514 Installed
1970-72 CHEVELLE SS 1970 Chevelle In-Dash Tachometer #S514-W 1971-72 Chevelle In-Dash Tachometer
#S514-G
$134.50 $134.50
1970-72 CHEVELLE MALIBU 1970 Malibu In-Dash Tachometer #S518-W 1971-72 Malibu In-Dash Tachometer
#S518-G #S514-W
$134.50 $134.50
#S518-G #S518 Installed
20
www.shiftworks.com
NOVA IN-DASH TACHOMETER CONVERSIONS
#S515 Installed
1963-65 NOVA #S515
1963-65 Nova In-Dash Tachometer
$139.50
1968-72 NOVA #S517-G #S517-W
1968-70 Nova In-Dash Tachometer 1971-72 Nova In-Dash Tachometer
$134.50 $134.50
#S515
#S517 Installed
#S517
www.shiftworks.com
21
TRANS-STORMER TH350, TH400, TH200-4R, TH700-R4, 4L60, 4L65, 4L80 Trans-Stormer The Trans-stormer shifter is a universal design suitable for many applications and specific to none. It is available as either a rod linkage or cable shifter, with a full neutral safety/back-up light switch, and with several knob and handle options. Same shifter for all TH350, TH400, TH200-4R, TH700-R4, 4L60, 4L65, 4L80.
1963-64 NOVA & 1963 IMPALA Installed in early Nova/Impala console.
SW230-R22 SW230-R23
10 inch w/white knob 10 inch w/black knob
$285.00 $285.00
1964 & EARLIER CORVETTE Complete with Neutral Safety/Back-Up light switch, mounting system, and rod linkage connection kit. Smoothie Knob SW230-R24 6 inch & 1/2 inch diameter w/white knob $285.00 SW230-R23 6 inch & 1/2 inch diameter w/black knob $285.00 SW230-R22
1965-67 CORVETTE Complete with Neutral Safety/Back-Up light switch, mounting system, and rod linkage connection kit. Button Top Knob New body coming to replicate Original PowerGlide Shifter $350.00 SW280-R05 1965-67 6 inch $275.00
SW230-R23
1965-67 CORVETTE CONSOLE INSERTS S141 S142
S141
SW280-R05
22
www.shiftworks.com
TH- 3 speed OD- 4 speed
$44.50 $44.50
S142
PowerGlide Shifter All Trans-Stormer Shifters can now be ordered for the PowerGlide. Simply add a P to the part number prefix. For example, the SW230-R22 becomes a SW230P-R22. Price is the same. However, some PowerGlide transmissions may require an additional Range Selector Shaft and Lever available seperately. Both cable and rod linkage versions available.
PowerGlide Rod Linkage
PG-R PG-C
PowerGlide Cable Linkage
Rod Linkage conversion Cable Linkage conversion
$95.00 $125.00
Conversions include range select shaft and kickdown shaft that must be installed into the transmission. Cables sold seperately.
1967 CAMARO & FIREBIRD & 1968-72 NOVA Shifter for PowerGlide Complete with rod linkage, optional off sets and Neutral safety/backup light switch. Uses pre-existing PG range select lever at transmission. Shiftworks will be offering parts to connect to any PowerGlide. SW280P-RCT
$325.00
www.shiftworks.com
23
Shifter for all Turbohydramatics TH3650, TH400, TH200-4R, TH700-R4, 4L60, 4L80
1967 CAMARO & FIREBIRD, 1968-72 NOVA Complete with all linkage, optional off sets, mounting system, and Neutral safety/ backup light switch. SW280-RCT $350.00
1964-67 CHEVELLE & IMPALA, 1965-67 NOVA
SW280-CT7
7 inch T-Handle Shifter w/cable
$350.00
New Shifter is complete witih all cable linkage, shiftworks cable, neutral safety switch, and T-handle with Trim-Parts black button.
24
www.shiftworks.com
Curved T-Handle
Straight T-Handle
Button Top Knob
Rod Linkage Kit
Smoothie Knob
Cable Kit
Shifters are available as either Rod Linkage or Cable with choice of knob styles. The SW280 has a 5/8’’ diameter handle and is available in 6, 7 or 8 inch length. The SW230 has a 1/2” diameter handle and is available in 6 or 10 inch length. SW280-R Rod Linkage $275.00 SW280-C Cable $275.00 *Cable purchased seperately SW230-R SW230-C
Rod Linkage Cable
$285.00 $285.00 *Cable purchased seperately
T-handle: Add $75.00 for Curved, and $20.00 for Straight.
www.shiftworks.com
25
TRANS-STORMER
CONSOLE HOUSING, CONSOLE MOUNT, INDICATOR & SLIDER Mounts directly to shifter and can be used with or without the Shfitworks console housing. Great for custom applications. NOTE: These indicators are for STANDARD GATE. They will not line up for the short gate.
SW280-014A SW280-014B
3-speed indicator 4-speed OD indicator
$44.50 $44.50
CONSOLE HOUSING Housing is vacuum molded and about 5 inches high x 16 inches long x 6 inches wide with a 1/2 inch deep recess. It can be cut down as required to fit. SW280-CH $38.50
26
www.shiftworks.com
Rod Linkage Shifter
Cable Linkage Shifter
www.shiftworks.com
27
IN-DASH GAUGE CONVERSIONS
Shiftworks® 200 Air Park Drive Suite 10 Rochester, NY 14624
Ph: (585) 436-0139 Fax: (585) 436-0143