2011 

 

          RENICE  X2  2.5''    SATA  SSD  DATASHEET    

Shi Jian Lee  Renice Technology Co., Limited  2011‐04‐26 

 

 

  CATALOGUE  1. Introduction ..................................................................................... 3  1.1 Product Overview ........................................................................................................... 3  1.2 Feature ............................................................................................................................ 3  1.3Functional Block Diagram ................................................................................................ 4  1.4Form Size ......................................................................................................................... 5   

2. Pinout information ............................................................................. 6  1)Pin Assignment ........................................................................................................... 6  2)Connector Pin Signal Definitions ....................................................................... 7 

3. Power Specfication ........................................................................... 8  1) Operating Voltage :5.0V(±5%) ...................................................................................... 8  2) Power Supply Voltage ................................................................................................... 8  3) Power Consumption(typical) ........................................................................................ 8 

4. Reliability Specification .................................................................... 8  5. SATA Interface Features .................................................................... 9  6. Internal MROM for Boot-loader .................................................. 9  7. H/W Acceleration Engine ............................................................ 9  8. Mobile SDRAM Interface ............................................................. 9  9. ATA Command Set .......................................................................... 10  10. SMART ......................................................................................... 13  11. Buy Information ........................................................................... 15  12. Product model of naming rule ...................................................... 15           

 

 

1Introduction  1.1 Product Overview  ReniceX2 2.5” SATA SSD (Solid State Drive) is a high performance and high reliability storage device based on NAND Flash technology that designed to solve the bottleneck of computing system by traditional hard disk drives. ReniceX2 2.5” SATA SSD doesn't have a moving parts and it has a same host interface and same physical dimension with Hard Disk Drive,So it can be drop-in replaced with the hard disk drives without anything. With a high performance and low power consumption, ReniceX2 2.5” SATA SSD can be a good storage device for NB and Tabletop PC ,ReniceX2 2.5” SATASSD purely consists of semiconductor devices and NAND flash memories, which give rugged features against shock and vibration use in extreme environment such as industrial PC an increased MTBF. Further more, ReniceX2 2.5” SATA SSD has highly advanced flash memory management algorithm to guarantee higher performance and data integrity 

1.2Feature  ●Performance Sequentila Data Read:up to 250MB/s Sequentila Data Write:up to 220MB/s 4kb Random Read IOPS: up to 8,000 4kb Random Write IOPS: up to 6,000 Access Time: 0.1ms ● Form factor: 100.2mmX69.5mmX9.6mm(LxWxH)  ●Weight：＜70g ● Interface standard: SATA ● Density:MLC:16GB,32GB, 64GB,128GB,240GB; SLC:8GB,16GB,32GB, 64GB,128GB. ● Input voltage: 5.0V (±5%) ● Commercial operating temperature range form 0 to +70℃ Industrial operating temperature range form -40 to +85℃ ● Flash management algorithm: static and dynamic wear-leveling, bad block management algorithm ● Supports dynamic power management and SMART (Self-Monitoring, Analysis and Reporting Technology) ●ECC Recovery：6,12bytes/sector correctable by RS mode 8, 12, 16bits/sector correctable by BCH mode ●Performance Optimization：TRIM (requires OS support) ● Write endurance: >8 years @ 100GB write/ day(30GB SSD) ● Read endurance: unlimited ● Data retention: 10 years ● MTBF: 2,000,000 Hours

   

 

1.3Functional Block Diagram         

                                  Figure 1.3:Functional Block Diagram 

                                       

 

   

1.4    Form Size: 100.2mmX69.5mmX9.6mm(LxWxH)   

          Figure1.4:form size                               

 

 

2Pinout information     

1) Pin Assignment     

     

Figure .2‐1:Pin Assignment                                     

 

 

2)Connector Pin Signal Definitions  Table .2-2:Connector Pin Signal Definitions

 

 

Pin

Definitions

S1

GND

S2

SATA Differential RX+ based on SSD

S3

SATA Differential RX- based on SSD

S4

GND

S5

SATA Differential TX- based on SSD

S6

SATA Differential TX+ based on SSD

S7

GND

P1

+3.3V(Unused)

P2

+3.3V(Unused)

P3

+3.3V(Unused)

P4

GND

P5

GND

P6

GND

P7

+5V

P8

+5V

P9

+5V

P10

GND

P11

DAS/DSS

P12

GND

P13

+12V(Unused)

P14

+12V(Unused)

P15

+12V(Unused)

 

3Power Specification  1) Operating Voltage :5.0V(±5%)  2)Power Supply Voltage  1.0v for Core, 3.3V for NAND , 1.8V for SDRAM.  3) Power Consumption(typical)      Operation (Read/Write) –1.0W      Idle ‐ 0.4W      Standby ‐ 0.4W  Sleep(Partial/Slumber) ‐ 0.4W/0.15W   

4Reliability Specification  Item  Temperature 

 

         

 

Features  Operating

Standard: 0℃～70℃  Industrial:‐40℃～85℃ 

Humidity 

5‐95% 

Vibration 

20G(7‐2000Hz) 

Shock 

2,000G(@0.3ms half sine wave) 

MTBF 

>2,000,000 hours 

 

5    SATA Interface Features    .    Seamless SATA interoperability      .    Plug‐and‐play field‐proven SATA‐v2.6‐compliant interface    .3 Gbps / 1.5 Gbps signaling (auto‐negotiated)    .    Native Command Queuing (NCQ) support    .    S.M.A.R.T. command transport (SCT) technology 

6 Internal MROM for Boot-loader Robust Firmware Corruption Maintenance and diagnostics program in MROM for recovering from drive malfunction

7 H/W Acceleration Engine Internal SRAM and external DRAM search engine

8 Mobile SDRAM Interface 64MB buffer memory by Flash capacity

   

 

 

9   ATA Command Set 

   

 

   

 

     

 

 

10SMART     

Table 10‐1:SMART Command Set 

                 

 

  Table 10‐2:SMART Attribute Data Structure 

             

 

 

11Buy Information  MLC Part Numbers 

SLC Part Numbers 

8GB 

RCM008‐SX22 

RCS008‐SX22 

16GB 

RCM016‐SX22 

RCS016‐SX22 

32GB 

RCM032‐SX22 

RCS032‐SX22 

64GB 

RCM064‐SX22 

RCS064‐SX22 

128GB 

RCM128‐SX22 

RCS128‐SX22 

256GB 

RCM256‐SX22 

RCS256‐SX22 

Capacity 

 

12 Product model of naming rule  R    C    M      064       ‐   S   X2   2 RENICE 

C‐Commerical  I‐Industrial 

M‐MLC  S‐SLC 

2‐2.5Inch 

X2‐IndilinxController 

64GB 

‐ 

S‐SATA