SFS intec Easy 3D program
Over the years the constant attention to new market trends and SFS intec’s focus on the final user have led our business to develop an extensive range of hinges for entrance doors: the Easy 3D program. Created to meet the need expressed by our customers for hinges for heavy doors that are easy to install and to adjust, today the Easy 3D range is able to cover most applications in various markets and namely five different profiles each with its own hinge. New energy-saving trends and increasingly heavier doors, call for top performing certified hinges. Our Easy 3D hinge was awarded CE certification by the IFT Institute in Rosenheim, who also certified it to be suitable for use on fire doors. Plus, it can support loads up to 160 Kg, which makes it the optimal solution for all kinds of needs. Its extremely high resistance to corrosion, the security screw fitted to each hinge and the wide range of finishes available give the door a unique top quality appearance. The system, which comes with milling jigs and inserts, allows easy application of the hinges to most profile types.
Why choose a milling hinge
Why choose Easy 3D
• greater load-bearing capacity, up to 160 Kg
• 9 different colours - no need to add additional cover caps
• greater door stability • a hinge that always maintains its vertical axis • greater aesthetic value of the door
• 9 versions for a great range of applications • security screws as standard on all versions • extremely high resistance to corrosion thanks to the materials used • each hinge can be adjusted in 3 dimensions to better distribute weight • it can also be used with two hinges only whilst still maintaining the three adjustment levels • easy to adjust when the door is closed • only two holes in the frame for better looks when the door is open • suitable for use on fire doors
Hinges with an eye to the future The hinges of a door are like the engine of a car and for the last 50 years SFS intec has not been offering compromises, but solutions with an eye to the future. Solutions that are always fully compliant with European regulations and, above all, solutions that do not require maintenance over time.
Easy 3D-20 18
20 50
50
20
15
4 20
4 17
20
14
Code 1351253 1353012 1353015 1353016 1353017 1353018 1353019 1353020 1353021
Finishing matt chromed white RAL 9016 brassed light bronzed matt nickel brown RAL 8017 black RAL 9005 powder coated light inox imitation matt inox
Packaging 3 pcs. 3 pcs. 3 pcs. 3 pcs. 3 pcs. 3 pcs. 3 pcs. 3 pcs. 3 pcs.
18
20
20
15
∅ 20
50
50
50
50
4
4 14
20
17
117 20
20
50
50
130
18
18
90
20
12 20
12 20
9
9
Easy 3D-23
4
12 20
12
20
20
Finishing white RAL 9016 matt chromed brassed light bronzed matt nickel brown RAL 8017 black RAL 9005 powder coated light inox imitation matt inox
50
∅ 20
Packaging 3 pcs. 3 pcs. 3 pcs. 3 pcs. 3 pcs. 3 pcs. 3 pcs. 3 pcs. 3 pcs.
39
130
4,5 50
50
4,5
Code 1357298 1357299 1357300 1357312 1357313 1357314 1357315 1357316 1357317
90
25
25
18
117
18
Easy 3D-24 18
25
25
18
10 50
50
10
4 20
12
20
20
12
Code 1357318 1357319 1357320 1357321 1357324 1357325 1357326 1357327 1357431
Finishing white RAL 9016 matt chromed brassed light bronzed matt nickel brown RAL 8017 powder coated light inox imitation matt inox black RAL 9005
Packaging 3 pcs. 3 pcs. 3 pcs. 3 pcs. 3 pcs. 3 pcs. 3 pcs. 3 pcs. 3 pcs.
25
20
50
∅ 20
39
50
12
4
90
130
20
117
20
Easy 3D-25 44
44 12
50
50
12
20 11
20 11
4
4
Code 1357434 1357436 1357439 1357465 1357466 1357467 1357468 1357469 1357470
Finishing white RAL 9016 matt chromed brassed light bronzed matt nickel brown RAL 8017 black RAL 9005 powder coated light inox imitation matt inox
Packaging 3 pcs. 3 pcs. 3 pcs. 3 pcs. 3 pcs. 3 pcs. 3 pcs. 3 pcs. 3 pcs.
45
45 13
13
∅ 20
44
46
4
46 14
50
50
14
20 11
4
20 11
4
130
20 11
4
90
20 11
117
50
50
50
Easy 3D-26 39
39 18 12
50
50
25
25
18 12
20
20
20 12 12
4
41
Code 1357329 1357330 1357331 1357332 1357334 1357335 1357471 1357472 1357473
Finishing white RAL 9016 matt chromed brassed light bronzed brown RAL 8017 imitation matt inox matt nickel black RAL 9005 powder coated light inox
Packaging 3 pcs. 3 pcs. 3 pcs. 3 pcs. 3 pcs. 3 pcs. 3 pcs. 3 pcs. 3 pcs.
41
20 14
25
50
∅ 20
39
50
50
25
20 14
130
20 12 12
4
90
20
117
20
Easy 3D-28
25
1357337
50
4
16
90
50
117
20
Finishing white RAL 9016 brown RAL 8017 black RAL 9005 brassed matt chromed matt nickel light bronzed powder coated light inox imitation matt inox
∅ 20
Packaging 3 pcs. 3 pcs. 3 pcs. 3 pcs. 3 pcs. 3 pcs. 3 pcs. 3 pcs. 3 pcs.
44
130
Code
15
Easy 3D-30 Code 1360500
Finishing matt chromed
Packaging 3 pcs.
50
35
38 min.
4,5
4 20
12
110
∅ 20
90
117
50
49
Device for Easy 3D-20 hinge The device, which is available with our Easy 3D-20 hinge, allows to easily and quickly adapt the hinge to the shape of the profile, going from a 18mm gasket to a 10/12mm gasket. Finishing Natural nylon
Packaging 1 piece
50
Code 1272299
Milling covering cap for 15 mm frame A milling covering cap is available for applications on 15mm frames. The same cap can be used for applications with or without frame gasket and is available in various colours.
50
20
15
4 20
14
Code 710858 710859 710860 710861 711229
Finishing white RAL 9016 brown RAL 8017 brassed matt nickel matt chromed
Packaging 12 pcs. 12 pcs. 12 pcs. 12 pcs. 12 pcs.
Easy 3D-20 inox The Easy 3D inox hinge has been designed to meet the needs of those who want a modern and contemporary look such as satin polished stainless steel. Easy to assemble and adjust, the typical features of this hinge are combined with the modern touch of satin polished stainless steel.
15 ÷18 ÷20
50
50
6°
6°
21 min.
11
18,5 min.
15 ÷18 ÷20
13,5
The use of special 3-step bolts, a patent developed by SFS intec, ensures extraction resistance levels of over 1500 Kg, which guarantees steady fixing of the hinge on any type of profile.
4
4 20
Code 1360209
9,4
18 ÷20
Finishing satin polished stainless steel
Packaging 3 pcs.
9°
23 min.
6°
21 min.
18 ÷20
13,5
20
4
50
50
4,5
4 20
50
22,6
∅ 20
65
18 ÷20
84
90
117
∅ 9,8
50
6°
21 min.
∅ 9,8
13,5
10 ÷12
4 20
The 3-step threaded bolts and the use of a 2-step drill bit allow fast and problem-free fitting of the hinge. Once you have made the hole with the 2-step drill bit, step 1 of the threaded bolt can be easily inserted in the hole and automatically centres the hinge. Once inserted, the hole adapts perfectly to the threaded bolt and ensures the latter is anchored securely in the wood along its entire length. Moreover, the rear section of the threaded bolt compresses the wood, which increases the hinge’s stability.
Adjusting the hinges Horizontal Height Gasket pressure
+/- 3 mm + 3 mm / - 2 mm +/- 2 mm
The adjustment holes are placed on the front of the hinge. These are independent, mechanical adjustments which do not interfere with each other and are made with a 4 mm hex key. Each hinge can be adjusted in 3 dimensions to better distribute the weight on all the hinges. Therefore then can be adjusted in any order. 2
Horizontal adjustment to the left side 1 4
1. Loosen screw 1.
3
2. Tighten screw 2. Horizontal adjustment to the right side 1. Loosen screw 2. 2. Tighten screw 1.
Height adjustment 1. Carry out the height adjustment by operating on screw 3.
2 1 4
2. To distribute weight properly, carry out the adjustment first on one hinge and then gently line up the adjustment screws of the other hinges. 3. The adjustment is a self-locking mechanism.
3
Gasket pressure adjustment 1. Carry out the gasket pressure adjustment by operating on screw 4. 2. The adjustment is a self-locking mechanism
2 1 4
3
Once the adjustments are completed, fit the cap in the main body.
Certified hinge in accordance with EN 1935:2004 standard
Each hinge can be adjusted in 3 dimensions to better distribute weight Several profiles and gaskets
Only two holes on the frame
Each hinge is checked and centred before dispatch
Safety dowel as a standard on all versions
RAL 9016
Imitation matt inox
Powder coated light inox
Matt nickel
Brassed
Light bronzed
RAL 8017
RAL 9005
Matt chromed
Wear-resistant self-lubricating bushes
Available in nine different colours
Easy 3D-01 ∅ 15
20 50
20 50
20
4 14
4 20
17
Code 1179932 1179935 1179936 1246949 1246950 1246961 1246962 1272759 1338346
Finishing brassed light bronzed brown RAL 8017 white RAL 9016 matt nickel powder coated light inox black RAL 9005 matt chromed imitation matt inox
∅ 15
40
90
117
50
Packaging 3 pcs. 3 pcs. 3 pcs. 3 pcs. 3 pcs. 3 pcs. 3 pcs. 3 pcs. 3 pcs.
130
18
15
Adjusting the hinges Horizontal adjustment 1. Loosen the screw in hole 1. 2. With a 4mm Allen key adjust +/- 3mm turning screw 2 on the right side or on the left side in accordance with the adjustments you want. 3. After the required adjustment, tighten the screw 1. Height adjustment 1. For height regulation adjust screw 3 turns clockwise, to raise the door 3 mm and turn counterclockwise, to bring the door 2 mm down. Gasket pressure adjustment
2 1 4
3
The hinge will be supplied with the central part adjusted for gasketed doors. For ungasketed applications tighten screw 4 turns clockwise to move the central part in the correct position. In both positions a +/- 2 mm adjustment is possible by tightening screw 4 turns respectively clockwise or counterclockwise. When adjustments have been done, fit the cap on the central part of the hinge.
Milling jig for sash
The milling jig can be used to carry out milling on the hinges listed below: -
E3D E3D E3D E3D E3D E3D
20 23 24 25 26 28
It is supplied without the bakelite device, which has to be ordered separately Code
1338998 1361197
Milling jig Milling jig only for Easy 3D-30
Bakelite devices for the different versions Code
1272544
1272742
1361180 1361192
Device Easy 3D-20 Device Easy 3D-25 Device Easy 3D Ø15 Device Easy 3D-23 Device Easy 3D-24 Device Easy 3D-26 Device Easy 3D-28 Device Easy 3D-30
Drilling jig for Easy 3D inox sash
Code
1272876
Jig
Sash milling diagrams
130
50
4,5
R10
20
Easy 3D-20
15/18 39
130
9,5
R10
25
Easy 3D-23-24-26
18 32+x
4,5
R10
20
130
Easy 3D-25
x=12/13/14 130
Easy 3D-28
R10
11
R10
25
15
44 110
Easy 3D-30
35
4,5
R10
R10
130
40
4,5
R10
20
Easy 3D-01 Ø 15
15/18
Frame milling jig
The milling jig can be used on all Easy 3D hinge models. It is supplied without the bakelite device, which has to be ordered separately Code
1339001
Milling jig + drilling block
Bakelite devices for the different versions Code
1272545
1272743
1361194 1361195
Device Easy 3D-20 Device Easy 3D-25 to be used with spacer cod. 1331308 Device Easy 3D Ø15 Device Easy 3D-23 Device Easy 3D-24 Device Easy 3D-26 Device Easy 3D-28 Device Easy 3D-30
Code
1331308 1272246
Spacer for Easy 3D-25 Spacer for Easy 3D with air gap 12 mm
Reference jig for frame drilling For customers who employ machines with a numerical control to carry out milling, there is a reference jig that allows to make the hinge’s locking holes manually on the machine. Code
1272674
Frame milling diagrams
Easy 3D-25
Easy 3D-23-24-26
overlap 12-13-14mm with air gap 4 mm 20
=
∅6 ∅6
R10
10,5
R10
10,5 45
50
45
42
42
90
90
∅6 ∅6
11
=
= =
42
20
20
42
overlap 18-20mm with air gap 4 mm
50
Easy 3D-30
Easy 3D-28 overlap18mm with air gap 4 mm
50
50
10,5
6 ∅
42
6 ∅
42
6
R10
R10
∅
42
90
12 20
90
16 20
∅
42
6
R10
R10
10,5
22
26 45
45
E3D-20 and E3D ∅ 15
E3D-20 e E3D ∅ 15
overlap 15mm with air gap 4 mm
10,5
R10 45
50
42 42
∅6
=
=
∅6
42
90
=
42
17
∅6
20
90
=
overlap 18mm with air gap 4 mm
14
∅6
20
10,5
R10 45
50
made in Italy
SFS intec S.p.A. FasteningSystems Via Castelfranco Veneto, 71 IT-33170 Pordenone
Tel. 0434 99 51 Fax 0434 995201
[email protected] www.sfsintec.biz/it
Turn ideas into reality
© SFS intec 2013 / Printed in Italy / SFS intec cannot be held liable for any typographical errors - 904450, GB - SFS intec considers that all information is correct at time of publication. and reserves the right to make changes or modifications without prior notification. SFS intec cannot be held responsible for improper or incorrect use.
