FILE NO
SERVICE MANUAL
TC-L32XM6
LED TV
TC-L32XM6X TCTC-L32XM6P
1
CONTENTS 1. Safety precautions .................................................................................................3 2. Alignment instructions and method of software upgrading.....................................5 3. Working principle analysis of the unit ................................................................... 12 4. Specifications.......................................................................................................13 5. Block diagram ......................................................................................................14 6. IC block diagram ..................................................................................................17 7. Wiring diagram ...................................................................................................24 8. Troubleshooting guide..........................................................................................28 9. Schematic diagram ..............................................................................................32 10. APPENDIX-A: Assembly list APPENDIX-B: Exploded View 11.Disassembly and Assembly Instructions
2
Attention: This service manual is only for service personnel to take reference with. Before servicing please read the following points carefully.
Safety precautions 1. Instructions Be sure to switch off the power supply before replacing or welding any components or inserting/plugging in connection wire Anti static measures to be taken (throughout the entire production process!): a) Do not touch here and there by hand at will; b) Be sure to use anti static electric iron; c) It’s a must for the welder to wear anti static gloves. Please refer to the detailed list before replacing components that have special safety requirements. Do not change the specs and type at will.
2. Points for attention in servicing of LED 2.1 Screens are different from one model to another and therefore not interchangeable. Be sure to Use the screen of the original model for replacement. 2.2 The operation voltage of LED screen is high voltage. Be sure to take proper measures in protecting yourself and the machine when testing the system in the course of normal operation or right after the power is switched off. Please do not touch the circuit or the metal part of the module That is in operation mode. Relevant operation is possible only one minute after the power is switched off. 2.3 Do not use any adapter that is not identical with the TV set. Otherwise it will cause fire or damage to the set. 2.4 Never operate the set or do any installation work in bad environment such as wet bathroom, laundry, kitchen, or nearby fire source, heating equipment and devices or exposure to sunlight etc. Otherwise bad effect will result. 2.5 If any foreign substance such as water, liquid, metal slices or other matters happens to fall into the module, be sure to cut the power off immediately and do not move anything on the module lest it should cause fire or electric shock due to contact with the high voltage or short circuit. 2.6 Should there be smoke, abnormal smell or sound from the module, please shut the power off at once. Likewise, if the screen is not working after the power is on or in the course of operation, the power must be cut off immediately and no more operation is allowed under the same condition. 2.7 Do not pull out or plug in the connection wire when the module is in operation or just after the power is off because in this case relatively high voltage still remains in the capacitor of the driving circuit. Please wait at least one minute before the pulling out or plugging in the connection wire. 2.8 When operating or installing LED please don’t subject the LED components to bending, twisting or extrusion, collision lest mishap should result. 2.9 As most of the circuitry in LED TV set is composed of CMOS integrated circuits, it’s necessary to pay attention to anti statics. Before servicing LED TV make sure to take anti static measure and ensure full grounding for all the parts that have to be grounded. 2.10 There are lots of connection wires between parts behind the LED screen. When servicing or moving the set please take care not to touch or scratch them. Once they are damaged the screen would be unable to work and no way to get it repaired. If the connection wires, connections or components fixed by the thermo tropic glue need to disengage when service, please soak the thermo tropic glue into the alcohol and then pull them out in case of damage. 3
2.11 Special care must be taken in transporting or handling it. Exquisite shock vibration may lead to breakage of screen glass or damage to driving circuit. Therefore it must be packed in a strong case before the transportation or handling. 2.12 For the storage make sure to put it in a place where the environment can be controlled so as to prevent the temperature and humidity from exceeding the limits as specified in the manual. For prolonged storage, it is necessary to house it in an anti-moisture bag and put them altogether in one place. The ambient conditions are tabulated as follows: Temperature
Humidity
Scope for operation
0 ~ + 35 oC
Scope for storage
-20 ~ + 60oC
Scope for operation
20% ~ 80 %
Scope for storage
10% ~ 90%
2.13 Display of a fixed picture for a long time may result in appearance of picture residue on the screen, as commonly called “ghost shadow”. The extent of the residual picture varies with the maker of LED screen. This phenomenon doesn’t represent failure. This “ghost shadow” may remain in the picture for a period of time (several minutes). But when operating it please avoid displaying still picture in high brightness for a long time.
3. Points for attention during installation 3.1 The front panel of LED screen is of glass. When installing it please make sure to put it in place. 3.2 For service or installation it’s necessary to use specified screw lest it should damage the screen. 3.3 Be sure to take anti dust measures. Any foreign substance that happens to fall down between the screen and the glass will affect the receiving and viewing effect 3.4 When dismantling or mounting the protective partition plate that is used for anti vibration and insulation please take care to keep it in intactness so as to avoid hidden trouble. 3.5 Be sure to protect the cabinet from damage or scratch during service, dismantling or mounting.
4
2. Alignment instructions (1) Test equipment VG-859 (YPbPr, VGA, HDMI signal generator) FLUKE 54200(TV signal generator) CA310 (white balancer)
(2) Power test Connect main board, power board and IR board according the wiring diagram, connect the power and press power key (Remote controller or Keypad) button to turn on the TV. a) Test the pin voltage of P802/power board , the data is shown in table1: Table1 voltage data of P802 For 32” P802
Pin1,2
Pin3,4
Voltage
GND
11.4V~12.6V
Pin5,6,7 GND
Pin8,9
Pin10,11
11.4V~12.6V
4.75V~5.25V
For 32” Pin12 On:2.5V~5.25V Off: 0~0.5V
Pin13 Normal: 2.0~5V Abnormal :0~0.5V
Pin 14
Pin15
On:2.5V~5.25V Off: 0~0.5V
Duty 5%~100%
5
Pin16 NC
(3) Alignment flow-chart The alignment flow-chart is shown as fig-1
Check if EDID, HDCP KEY, FLASH are written
Combined test for general assembly
Auto Gamma adjustment
Connect to the center signal source and check each Function of TV (station leaking, analog control, etc.) Check the output of speaker.
Input AV signal and check the function
Input HD signal and check the function of YPbPr
Input USB signal and check if the display is normal, check the function (analog control), horizontal/vertical center, etc.
Input HDMI signal and check if the display is normal, check the function (analog control), horizontal/vertical center, etc. Checking SPDIF will output the signal on Amplifier.
Preset ex-factory
Check the accessories and packing
Fig-1 adjustment flow-chart
6
(4) Adjustment instruction At any input source then press the “←”, “EXIT” and “OK” (using RC within 1 sec) to enter factory mode During Factory menu, if “EXIT” key is pushed, system will exit factory mode. 4-1. Auto Gamma Adjustment & Check
4-2.1. Set into factory mode then choose Auto Gamma Adjust, 4-2.2. Press "2" "3" "2" "4" in turn within 1sec to enter the item, and push Init will self-generate gray pattern for adjusting.
4-2.3.
Following the Cool spec as bellow.
Color x y Adjust Tolerance
Cool 100IRE
0.2677
50IRE
0.2684
100IRE
0.2655
50IRE
0.2671
±0.005
(1) Adjust 100IRE First, Decrease G to meet y spec(0.2655). Second, Decrease R to meet x spec(0.2677). (2) Adjust 50IRE First, Decrease G to meet y spec(0.2671). Second, Decrease R to meet x spec(0.2684). Note: Do not adjust the B GAIN on both 100IRE and 50IRE. When match the spec, pressing “Save” then exit the adjustment page. () When match the spec, pressing right key in "Save" position then exit the adjustment page. 4-2.4. Exit Factory Mode: After finish Gamma adjust press [EXIT] to exit factory mode.
7
(5) Items of Factory menu When in any source, press the “Left -> Exit -> Enter” key of remote control can enter into factory mode. During Factory menu, only “EXIT” key is pushed, system will exit factory mode. Press up and down key can move high light item from Model Change -> Color Temp. Adjust -> Auto Gamma Adjust -> Timer Clear -> Preset Channel -> Full Power -> ADC Calibration -> Shipping reset -> Bypass Gamma -> UART Enable -> I2C -> Boot Loader Upgrade -> V-Com Adjust -> SG Pattern. Push “Enter” key can enter high light item function. (Press left and right can adjust value) Display Model version, Release Date, firmware version and released date on the bottom.
1)Model ID Press up or down key can select high light item function Press enter or right key to enter the item. It's only used for FW engineer. 2)Color Temp. Adjust Press up or down key can select high light item function Press enter or right key to enter the item. It's only used for PQ engineer. 3)Auto Gamma Adjust Press up or down key can select high light item function Press enter or right key to enter the item. It's only used for PQ engineer. 4)Timer Clear Reset the timer which records hours of LED panel burn in This item will have a check dialog “yes or no” to do or not. - Time in factory mode: Time function shall be displayed automatically. Saving the total time of system power on (LED turn on), and count the time automatically. The timer is continuous and saved (per 10 minutes) forever, unless it will be reset by doing “Timer Clear”. 5)Preset channel Load preset channel for production line. 6)Full Power This is for power consumption testing. To measure the maximum power consumption of TV set, we adjust the value of following items to maximum. - Video: Contrast maximum value, Brightness maximum value, Backlight maximum value. - Audio: Volume maximum value, Bass default value, Treble default value. Press enter key to turn on Full Power and OSD stay display until press enter key to recover from Full Power. 8
7)ADC Calibration ADC Calibration function is reserved for calibration by hand (PQ engineer only). 8)Shipping reset Reset all settings of OSD menu to default value. Reset settings: Channel table, Model table (H/V Position, Clock, Phase), Source dependent setting (Contrast, Brightness etc.), Common setting (Volume, Language etc.), Parental Control (Rating, Password etc), Closed Caption. 9)Bypass Gamma For factory test value of gamma. 10)UART Enable Enable to communicate with Auto-Alignment system. 11)I2C Enable to communicate with Eeprom burn-in tool. 12)Boot Loader Upgrade For firmware downgrade used. 13)V-Com Adjust It's reserved for BMS function. 14)SG Pattern Aging is for factory burn in and PTN ID provides each pattern for tester using.
(6) Performance check 6-1 TV function Connect RF to the center signal source, enter Channel menu → auto tuning, check if there are channels be skipped, check if the picture and speaker are normal. 6-2 AV terminals Input Video signal, check if the picture and sound are normal. 6-3 YPbPr terminal Input YUV signal (VG859 signal generator), separately input the YUV signals listed in table4 and check if the display and sound are normal at any situation (power on, channel switch and format convert, etc.)
Table4 YUV signal format
MODE
59.94Hz 720x480i
59.94Hz 720x480P
60Hz 1280x720P
60Hz 1920X1080i
60Hz 1920X1080P
FREQ
PERIOD
SYNC POLARITY
PIXEL CLOCK
LINE(kHz) FRAME (Hz)
LINE (pixel) FIELD (lines)
LINE FIELD
(MHz)
15.734
1716
Negitive
59.94
525
Negitive
31,469
858
Negitive
59.94
525
Negitive
45
1650
Positive
60
750
Positive
33.75
2200
Positive
60
1125
Positive
67.5
2200
Positive
60
1125
Positive
9
27 27 74.25 74.25 148.5
Display
SYNC WIDTH
BACK PORCH
LINE (pixel) LINE (pixel) LINE (pixel) FRAME FRAME FRAME (lines) (lines) (lines) 1440
124
114
480
3
15
720
62
60
480
6
30
1280
40
220
720
5
20
1920
44
148
1080
5
15
1920
44
148
1080
5
36
6-4 HDMI terminal Input HDMI signal (VG859 signal generator), separately input the signals listed in table6 and check the display and sound (32 KHz, 44.1 KHz, 48 KHz) at any situation (power on, channel switch and format convert, etc.)
Table6 HDMI signal format HDMI 1/2/ DVI Timing Table
FREQ
MODE
640x480
800x600
1024x768
1280x768 (1280cvt)
1280x768
1280x1024
1360x768
1366x768
1920x1080
59.94Hz 1440x480i
59.94Hz 720x480P
60Hz 1280x720P
60Hz 1920X1080i
24Hz 1920x1080P
30Hz 1920x1080P
60Hz 1920X1080P
FREQ
PERIOD
LINE(kHz) LINE (pixel) FRAME(Hz) FIELD(lines)
SYNC POLARITY
PIXEL CLOCK
LINE FIELD
(MHz) 25.175
31.47
800
Negitive
59.94
525
Negitive
37.88
1056
Positive
60.32
628
Positive
48.36
1344
Negitive
60
806
Negitive
47.4
1440
Positive
59.99
790
Negitive
47.78
1664
Negitive
59.87
798
Positive
63.98
1688
Positive
60.02
1066
Positive
47.71
1792
Positive
60.02
795
Positive
47.71
1792
Positive
59.79
795
Positive
67.5
2200
Positive
60
1125
Positive
15.73
1716
Negitive
59.94
262.5
Negitive
31.47
858
Negitive
59.94
525
Negitive
45
1650
Positive
60
750
Positive
33.75
2200
Positive
60
562.5
Positive
27
2750
Positive
24
1125
Positive
33.75
2200
Positive
30
1125
Positive
67.5
2200
Positive
60
1125
Positive 10
40 65 68.25 79.5 108 85.5 85.5 148.5 27 27 74.25 74.25 74.25 74.25 148.5
Display
SYNC WIDTH
BACK PORCH
LINE (pixel) LINE (pixel) LINE (pixel) FRAME FRAME FRAME (lines) (lines) (lines) 640
96
48
480
2
33
800
128
88
600
4
23
1024
136
160
768
6
29
1280
32
80
768
7
12
1280
128
192
768
7
20
1280
112
248
1024
3
38
1360
112
256
768
6
18
1366
112
256
768
6
18
1920
44
148
1080
5
36
1440
124
114
480
3
15
720
62
60
480
6
30
1280
40
220
720
5
20
1920
44
148
1080
5
15
1920
44
148
1080
5
36
1920
44
148
1080
5
36
1920
44
148
1080
5
36
6-5 other functions check a) Check the sleep timer, picture/sound mode, OSD, stereo and analog TV Teletext, etc.
(7) Firmware update process (1) Plug the USB with the firmware file named upgrade_2013_NA_60.pkg (2) If system detect upgrade_2013_NA_60.pkg, USB upgrade message would appear automatically. (3) Press Up key to select Yes, and then press OK key to start the upgrading.
(4) Upgrading is starting, please wait for the progress finish.
(5) When the progress completed, please follow the instruction to remove USB and restart Power off then on.
11
Working principle analysis of the unit 1. NTSC signals flow: Antenna signal will be send to tuner TDST-H021F, t h e n T u n e r w i l l b e demodulating and output standard video signal TV-CVBS, and sound SIF signal. TV-CVBS will send to the master control IC MT5385 to video decode, de-interlace and scaler, then output LVDS level drive for panel display. The sound IF (SIF) will be fed into MT5385, after demodulating, pre-amplifying, bass adjusting and volume control, the sound signal w i l l b e t r a n s f o r m i n t o d i g i t a l I 2 S s i g n a l and sent to digital amplifier TAS5707. 2. Composite/Component signal flow Composite signal and Component signal will be fed to MT5385 to perform video decode, deinterlace and scaler, then output LVDS drive level for panel display. Audio signal from Composite/Component terminal via matched resistance is fed to MT5385 to bass adjust and volume control, the sound signal will b e t r a n s f o r m i n t o d i g i t a l I 2 S s i g n a l and sent to digital amplifier TAS5707. 3. HDMI signal flow Two HDMI video signals are directly fed to the master control IC MT5385 to digital decode, image scale, then output LVDS drive level for panel display. HDMI audio signal via decoder built-in MT5385 to bass adjust and volume control, the sound signal will b e t r a n s f o r m i n t o d i g i t a l I 2 S s i g n a l and sent to digital amplifier TAS5707. 4. USB signal flow USB signal via USB connector sent to MT5385 and its A/D conversion to YPbPr output for MT5385, then output R/G/B of 24 bit to back end module to Video decode, de-interlace and image scale, then send to LVDS level drive for panel display. Sound signal of USB signal v i a matched resistance a n d sent to MT5385 to bass adjust and volume control, the sound signal will b e t r a n s f o r m i n t o d i g i t a l I 2 S s i g n a l and sent to digital amplifier TAS5707. 5. SPDIF signal flow The master control IC MT5385 will transfer digital sound signal out by format Dobly Digital or PCM.
12
4. Specifications
13
SPE32T 32” Block Diagram 5-1 Block Diagram EE: A70 60Hz Models by MTK MT5835 Platform
WXGA :2x10 Full-HD :2x20
Panel out R_out Audio AMP TAS5707 L_out
DDR3 1G-1600 H5TQ1G63DFR-PBC
Audio I2S output Flash 16MB MX25L12845EMI-10G
DTV system IC MTK MT5385
Keypad
EEPROM 64KB 24C32
IF +/-
Crystal 27MHz
CVBS/Y Pb Pr & Audio R/L
IR
Enable
ARC Buffer
IR / LED-R Board
Y Pb S/PDIF Tuner LG TDSTH021F
USB
Pr L R
ANT / CABLE
COLOR STREAM HD & COMPOSITE IN & Audio R/L in
SPDIF OUT
HDMI 1
14
HDMI 2
Power board:FSP
15
Power board:DARFON
16
IC block diagram 1. MT5385 GENERAL FEATURE LIST Host CPU ARM11 single core 700MHz Floating Point Unit 16K I-Cache and 16K D-Cache for ARM11 core 128K L2 Cache Boot ROM Boot from serial flash, NAND flash Supports security boot JTAG ICE interface Watch Dog timers General Copy Protection Unit Supports CPPM/CPRM Supports AES with 128/192/256 bit key Supports AACS Supports DES/3DES Supports SHA-1/224/256 Supports MD5 Supports CSS Supports RC4 Random number generator MPEG1 Decoder MPEG2 Decoder MPEG MP@ML, MP@HL Supports de-blocking filter Full-HD 30P dual decoder MPEG4 Decoder (option) ASP@L5 Full-HD 30P dual decoder H.264 (MPEG4.10 / AVC) HD Decoder (option)
[email protected],
[email protected], constrained BP@L3 video standard
Full-HD 30P dual decoder
VC-1 (SMPTE421M) Decoder (option) MP@HL, AP@L3 WMV9 decoder MP@HL Full-HD 30P dual decoder DivX (XviD) Decoder (option) 17
DIVX3 / DIVX4 / DIVX5 / DIVX6 / DIVX HD Full-HD 30P dual decoder
AVS Decoder (option) Jizhun profile @Level 6.2 (supports 4:2:0 format) Full-HD 30P dual decoder RMVB Decoder (option) RealVideo8/9/10 Full-HD 30P dual decoder VP6 Decoder (option) VP8 Decoder (option) Supports 3D side-by-side Full-HD contents Full-HD 30P dual decoder MVC
H.264 stereo high profile Full-HD 60fps
Still Image decoding JPEG decoder (base-line or progressive), hardware accelerator BMP/PNG/JIF decoder De-mosquito engine For all AV inputs 2D Graphics Supports multiple color modes Point, horizontal/vertical line primitive drawings Rectangle fill and gradient fill functions Bitblt with transparent options Alpha blending and optional pre-multiplied alpha composition Bitblt Stretch Bitblt YCbCr to RGB color space conversion Supports index to direct mode bitblt Image Resizer Supports 16bpp/32bpp direct color format Supports 420/422 video format Supports 420/422/444 JPEG format Arbitrary ratio vertical/horizontal scaling of video, from 1/128X to 128X
Simple DMA Supports MMU in OSD mode
OSD Plane Three linking list OSDs with multiple color mode and all of them have up-scaler Supports stereo OSD 18
Video Plane Supports video freeze and over scan
Flesh tone management Gamma correction Color Transient Improvement (CTI) 2D Peaking Saturation/hue adjustment Brightness and contrast adjustment Black and White level extender Adaptive Luma management Automatic detect video, film and mixed-mode source
3:2/2:2 pull down source detection Supports FHD motion-adaptive de-interlace Supports excellent low angle image processing
Brilliant boundary shaping for moving object Advanced non-linear panorama scaling Programmable zoom viewer Progressive scan output Supports alpha blending for OSD on video plane Dithering processing for flat panel display Frame rate conversion Supports FHD panel and VGA dot-to-dot Supports PIP/POP, (dual de-interlace, one HD and one SD)
OD (option) Supports 60Hz Full-HD and WXGA panel over drive TCON (option) Flexible timing control with programmable timing
Horizontal timing control Vertical timing control Multi-line timing control Multi-frame timing control Supports gate power modulation timing Supports command-based timing Supports POL inversion every 30 seconds Supports 1/2/4/8 frame inversion, 1-line inversion, 2-line inversion,
and could up to 255-line dot inversion Local Dimming Block division: up to 800 total blocks, up to 100 horizontal blocks Supports 50K ~ 50M SPI clock rate LVDS 19
Supports 6/8/10-bit one-link, 6/8/10-bit dual-link LVDS transmitter Built-in spread spectrum for EMI performance Programmable panel timing output
Mini-LVDS Dual port 8-bit 6 pairs mini-LVDS output CVBS In On-chip 54 MHz 10-bit video ADC Supports PAL (B,G,D,H,M,N,I,Nc), NTSC, NTSC-4.43, SECAM
NTSC/PAL supports 3D/2D comb filter Built-in motion-adaptive 3D Noise Reduction VBI data slicer for CC/TT decoding Supports 1 S-Video Supports 2 1-channel CVBS Supports SCART connector
VGA In Supports VGA input up to UXGA 162 MHz Supports full VESA standards Component Video In Supports 2 component video inputs Supports 480i / 480p / 576i / 576p / 720p / 1080i / 1080p Audio ADC Supports 3 pair L/R input Audio digital input Supports 1 bit (2 channel) I 2 S audio input HDMI Receiver Two channel HDMI1.4a Maximum data rate can be up to 3.3 GHz Audio return channel EIA/CEA-861B CEC Video bypass ATV bypass CVBS Monitor (any AV or S-video input) TV audio demodulator Supports BTSC / EIA-J / A2 / NICAM / PAL FM / SECAM world-wide formats Standard automatic detection 20
Stereo demodulation, SAP demodulation Mode selection (Main/SAP/Stereo)
Audio DAC Supports 2-pair audio DACs DRAM Controller 16-bit DDR2/DDR3 interface Supports DDR2 1066Mhz, DDR3 1333Mhz Supports 512Mb or 1Gb or 2Gb DDR2 and DDR3 DRAM device
Supports DDR2-1066/DDR3-1333/DDR3-1600 device
Audio DSP Supports AC-3 (Dolby Digital) decoding (ATSC) and E-AC3 (Dolby Digital Plus) decoding (option) MPEG-1 layer I/II decoding Supports WMA / HE-AAC (option) Support Dolby DDCO, and MS10 (option) Dolby Prologic II (option) Audio output: 5.1ch + 2ch (down mix) + 2ch(bypass)
Pink noise and white noise generator Equalizer Bass management 3D surround processing with virtual surround Audio and video lip synchronization Supports bass/treble Automatic volume control Supports 5-bit (10-channel) main audio I
2 S output interface, each of these channels is up to 24-bit resolution S/PDIF interface Supports SPDIF in bypass SPDIF out Analog TV IF Demodulator Supports world-wide analog TV standard Accept direct IF and low IF Full digital AGC control and carrier recovery Embedded SAW filter and IF Amplifier. Cost effective TV front-end structure and no more cost on: External analog SAW filters (Video/Audio) External analog IF demodulator External peripheral circuit on CVBS signal data path
External SAW filter and IF VGA on tuner 21
Digital TV (ATSC / Open-Cable) Demodulator Compliant with ATSC digital television standard range
Supports SCTE DVS-031 and ITU J.83 Annex B digital CATV standard Accept direct IF (44 MHz or 43.75 MHz) and low IF (5.38 MHz) NTSC interference rejection capability Meet all ATSC/A74 requirements Excellent adjacent and co-channel rejection capability Dual digital AGC controls for IF and RF, respectively Full-digital frequency offset recovery with wide acquisition 500KHz for ATSC and 250 kHz for CATV
reception EIA/CEA-909 antenna interface, both mode A and mode B are supported Embedded SAW filter and IF Amplifier. Cost effective TV front-end structure and no more cost on: External analog IF demodulator External SAW filter and IF VGA on tuner Peripherals Seven basic serial interfaces: one is for the tuner, three are the masters for general purpose and two of them can be active in standby mode, one is the slave for VGA DDC, other two extra slave serial interfaces used for HDMI EDID data Five PWMs, two of them can be active in standby mode
the
IR receiver Real-time clock and watchdog controller Built-in 2-link USB2.0/1.1, both of them support external hub with 16
endpoints. Built-in uP for standby mode Supports SDIO interface Supports smart card interface Supports two serial flash or one serial and one NAND flash Supports 2-input low-speed ADC Supports boundary scan (JTAG) IC Outline LQFP Package 216 pins with E-pad 3.3V/1.2V and 1.8V for DDR2 or 1.5V for DDR3
22
2. TI TAS5707 20-W STEREO DIGITAL AUDIO POWER AMPLIFIER WITH EQ AND DRC
23
SPE32T 32-inch Wiring Diagram 7-1 BLOCK
24
7-2 Wiring Connection CMI panel Main board to Panel
Main board to Speaker
SPE32T DC02L00700I 280 mm
SPE32T DC02A00130I L:280 & R:480 mm
Panel side P-TWO 187053-30091
LVDS cable
Main board CN1
Main board CN4
JWT A2006WR0-2X10P
JWT A2001WR2-4P
Speaker Color
Right
1 VCC
Red
1 LVDS_PWR
1 SPK_OUTL+
Red
P3 Speaker +
2 VCC
Red
2 LVDS_PWR
2 SPK_OUTL-
Black
P2 Speaker -
3 VCC
NC
4 VCC
NC
3 SPK_OUTR-
Green
P5 Speaker -
5 GND
NC
4 SPK_OUTR+
White
P4 Speaker +
6 GND
NC
7 GND
NC
8 GND
NC
9 SELLVDS
Yellow
Left
Main board to IR board/ Key 8 LVVDS_SEL
SPE32T
10 NC
NC
DC02V04140I
11 GND
NC
IR:450 mm & Key:750mm
12 RX0-
Yellow
20 LVDS_D0O_N
IR board CN1
13 RX0+
White
19 LVDS_D0O_P
JWT A2001WR2-11P
14 GND
NC
15 RX1-
Red
1 VCC3V3_STB 18 LVDS_D1O_N
2 IRR
25
Main board CN3 Color Red White
JWT A2001WR2-5P 1 VCC5_0_STB 2 IRR
16 RX1+
White
17 LVDS_D1O_P
3 GND
Black
3 GND
17 GND
Black
4 LED_G
Orange
4 LEDG
18 RX2-
Orange
16 LVDS_D2O_N
NC
5 LEDR
19 RX2+
White
15 LVDS_D2O_P
NC
6 Light_S_C
20 GND
Black
NC
7 Light_S_D
21 RXCLK-
Brown
14 LVDS_CO_N
1 GND
Black
22 RXCLK+
White
13 LVDS_CO_P
2 Power
Red
23 GND
Black
3 SAR0
Orange
10 SAR0
24 RX3-
Black
12 LVDS_D03_N
4 SAR1
Yellow
11 SAR1
25 RX3+
White
11 LVDS_D03_P
26 GND
NC
27 NC
NC
28 NC
NC
29 NC
NC
30 GND
NC
5 GND
6 GND
7 GND
26
8 GND 9 Power Key
Main board to Power board:
27
8. Trouble shooting 1. Fault clearance Before calling your dealer or service center for assistance, check the matters below once again. (1) Make sure you have connected LED TV to your equipment as described in the section “ CONNECTING LED TV”. (2) Check cable connection. Verify that all external equipment and power cord are properly connected. (3) Verify that all power is switched on. (4) If LED TV still does not produce an image, re-start the external equipment. (5) If the image still does not appear, unplug LED TV from the external equipment and check the external equipment. The problem may be with your graphics controller rather than with LED TV. (When you reconnect LED TV, remember to turn the external equipment and TV off before you power up LED TV. Power the equipment back on in order of LED TV and external equipment.) (6) If the problem still exists, check the following chart. Problem NO POWER
Try these Solutions Plug this LED TV into the AC outlet. Press POWER button on side control or on Remote Control to turn on LED TV. Check POWER Indicator. If this indicator blank, this TV has getting trouble. Check the batteries. Remote Make sure nothing is between the Remote Receiver and the Remote Control. Control does Make sure you are not too far from LED TV when using Remote Control. not work Maximum operating range is 5m. Is direct sunlight or strong artificial light shining on LED TV‘s Infrared Remote Receiver? Eliminate the light by closing curtains, pointing the light in a different direction, etc. Check the connection between the external equipment and LED TV. No image When turning LED TV on, it takes within 7 seconds (ATV mode) to display the image. Check the system that you select is corresponding with the external equipment or the video equipment. Make sure the temperature is not out of the Operating Temperature (0°C ~ 40°C). Turn off power, then turn on again, re-start LED TV. Check Audio cable connection from Audio input source. No sound Adjust the Sound System. Press VOLUME (+) button. Press MUTE button. There are tiny Dark or bright points of light (red, green, or blue) may appear on the screen. This is a characteristic of the LED panel, not a malfunction of the LED TV. black points LED panel is produced with very high accuracy technology. There is 99.99% or and/or bright more dot pixel, but there is also 0.01 % or less of dot pixel lack or dot pixel that point on the TV is constantly lighted. This is not defect. Regarding LED panel characteristic, it may occur picture remain (look like a mirror) when the screen is changed if it displays same screen for a long time. Changing the picture or turn-off the power supply may recover. Stripe pattern (more, interference stripes) may show up on the screen depends on the reflected picture. Abnormal Adjust the value of color. color of image Select different color system. 28
2. Troubleshooting guide The flow chart shown below will help you to troubleshoot your Televison set with it doesn’t display normally. Each procedure offers a simple way to check for system errors. Before starting, ensure that there is a signal in and that the Televison is turned on.
2-1 Power LED no light
29
2-2 Has audio but no video out
2-3
Has video but no audio out step 1
30
2-4
Has video but no audio out step 2
31
9.SCHEMATIC DIAGRAM --ELECTRON
5
4
3
2
1
PCB1
MT5385 Power Tree (12V)
AMP_VCC For AMP
D
D
FB20
+12V
U14 DMG4435SSS
Q15 SOT-23B LMBT3904LT1G FB22
5V_SW
SOP8 LVDS_PWR
FB21
(LVDS_PWR_EN)
For Panel
(NC) (Option)
(1.2V) +5VSB FB1
U1 SOP8-T5 AX3518ESA
FB2
VCCK
POWER_EN VTV-L32616 REV:1
(About 3.2A)
FW1
(3.3V) FB3
FIRMWARE
U2 AX1007E33A
FB4
3V3SB
SOT-223 R39
FW L32616
C
E1
AVDD33_XTAL_STB
R41
AVDD33_REG_STB C
SOT-23GDS Q1 DMP2160U
SOT-23B Q2 LMBT3904LT1G
(5V) FB5
5V_SW
FB17
+5V_USB0 +5V_USB0 => About 500mA
VCCK
For USB
(3.295V)
EMIcover-50x68m m /NC
FB6
U3 AX1117ADA
(1.2V)
(3.295V)
DVDD3V3
R8
AVDD3V3
FB7
TO-252
U5 AX1007E12A
FB10
AVDD1V2
SOT-223 R9 R21
(NC) (Option)
R30
AVDD12_RGB
R31
AVDD12_DEMOD
R28
AVDD1V2_HDMI1
AVDD33_MEMPLL
R29
AVDD33_DEMOD
R24
AVDD3V3_HDMI1
R39
AVDD33_PLLGP
R15
ADAC_3V3
B
B
R20
AVDD33_DAC
FB11
AVDD33_AADC
(1.5V) FB8
U4 AX1117ADA
FB9
DDRV For DDR3 Power
TO-252
(3.3V) FB19
U13 AX1117AD33A
+3.3V_TUNER
FB18
+3.3V_TUNER_1 (About 330mA)
TO-252
For Tuner
A
A
Title
COMPAL OPTOELECTRONICS CO., LTD SCHEMATIC,M/B VTV-L32616
Size
Docum ent Num ber
Date:
Tues day, Novem ber 27, 2012
Rev
1
XXXXXX 5
4
3
2
1
Sheet
1
of
11
5
4
3
2
1
Buck Converter 4A (1.2V) 11 POWER_EN
+5VSB
+3.3V_Standby power (3V3SB)
VCCK FB1 CLS UPB201212T-121Y-N 5A
U1
8 D
R2 10/1%
C3
+
LX
5
C4
VCC EN
0.1uF/10V/0402
CLS UPB201212T-121Y-N 5A
REF
C6
15pF/50V/0402
100mA
U2 AX1007E33A
+5VSB
C1 0.1uF/10V/0402
R3
332K/1%
R4
634K/1%
3
FB3 CLS UPB201212T-121Y-N 5A
VIN
D
C7
CLS UPB201212T-121Y-N 5A
GND/ADJ
C5
RB
2 4
VOUT VOUT
2
RA
1
22uF/6.3V/0805
100K/1%
C8
0.1uF/10V/0402
3V3SB FB4
RA
4
6 3 9
R6
FB
FB2
7 C2
1
ELNA SE100uF/16V
VIN PGND GND THEM_PAD
R1 10/1%
L1 SCD0403T-2R2M 2.2uH/3.8A
AX3518ESA
R5 249/1%/NC + C10
C9
+
C11
C12
0.1uF/10V/0402 10uF/16V/0805
0.1uF/10V/0402
4.7uF/6.3V C13
RB
0.1uF/10V/0402 ELNA SE100uF/16V/NC
R7 0
10uF/6.3V/NC
Vout=0.8Vx (1+RA/RB)
+5V_Nomal power (5V_SW)
5V_SW +5VSB U16
1 2 3 4
C
C14
FB5
S1 S2 S3 G
R10
D4 D3 D2 D1
8 7 6 5
+3.3V_Digital power (DVDD3V3)
CLS UPB201212T-121Y-N 5A C16 + C15
DMG4435SSS/NC
C17 0.1uF/10V/0402
4.7uF/16V/0805
400mA
U3 AX1117ADA
5V_SW 0.1uF/10V/0402/NC
47K/1% Q1
S
3
FB6 CLS UPB201212T-121Y-N 5A
D
VIN
G
VOUT
C24
RA
1 Q2
E
POWER_EN : High => 1.2V_SW POWER ON Low => 1.2V_SW POWER OFF
100K/1%
2
ADJ / GND
DMP2160U
C B
R12
DVDD3V3
C20
+
10uF/16V/0805 LMBT3904LT1G
AVDD3V3
ELNA SE100uF/16V
VCCK
Strapping mode :Must default Pull low.
C
(3.295V)
+ C21
0.1uF/10V/0402 C23
RB
1uF/6.3V/0402
0/1%/0805
R9
0/1%/0805/NC
R11 110/1%
C18
3/1 ,3/2 Modify
R8
C19
C22
10uF/10V/0805 0.1uF/10V/0402 ELNA SE100uF/16V/NC
R13 180/1%
10uF/6.3V/NC
VO=1.25Vx(1+RB/RA)+IadjxR2
B
B
+1.5V_DDR3 power (DDRV)
(1.5V)
+3.3V_Analog power (ADAC_3V3)
+1.2V_Analog power (AVDD1V2)
(1.2V)
100mA
DDRV U4 AX1117ADA
5V_SW
(3.295V)
U5 AX1007E12A
AVDD3V3
AVDD1V2 2/20 Modify
FB9
3
FB8 CLS UPB201212T-121Y-N 5A
VIN
VOUT
FB10
2
AVDD3V3
R15
ADJ / GND
RA
1
ADAC_3V3
CLS UPB201212T-121Y-N 5A
3
FB7 CLS UPB201212T-121Y-N 5A
VIN
0/1%/0805
VOUT VOUT
2 4
CLS UPB201212T-121Y-N 5A
GND/ADJ
R14 110/1%
1 C30
C27 10uF/16V/0805
+
C25
C26
0.1uF/10V/0402 C35
RB
R16 22/1%
C28
10uF/10V/0805 0.1uF/10V/0402
+ C29
C31
1/31 Delete 1uF/16V
ELNA SE100uF/16V/NC
+
C32 0.1uF/10V/0402
10uF/16V/0805
C33 4.7uF/6.3V
C34 0.1uF/10V/0402
10uF/6.3V/NC
VO=1.25Vx(1+RB/RA)+IadjxRB A
A
Title
COMPAL OPTOELECTRONICS CO., LTD SCHEMATIC,M/B VTV-L32616
Size
Document Number
Date:
Tuesday, November 27, 2012
Rev
1
XXXXXX 5
4
3
2
Sheet 1
2
of
11
5
4
3
AOSDATA0_1
2
AVDD3V3
C36
R23
AMP_MCK_1
R99
AVDD3V3
C
VCCK VCCK AVDD33_MEMPLL 1_CKE 1_A10 1_BA1 1_A4 1_A1 1_A6 1_A8 1_A11 1_A12 1_RAS# 1_CAS# DDRV 1_WE# 1_A0 1_A13 1_A9 1_RST# 1_A7 1_A2 1_A5 1_A3 1_BA2 1_BA0 1_CS# 1_ODT RDQ4
22pF/50V/0402
10nF/50V/0402
VCCK
AVDD3V3
MT5385
AVDD1V2
(Pin216) AVDD1V2_HDMI1
R28 0/0402
EPAD_GND
(Pin51) AVDD33_DEMOD
R29 0/0402
AVDD1V2
AVDD3V3
FAT_INFAT_IN+
(Pin195) AVDD12_DEMOD
R31 0/0402
CVBS0P
C57 0.1uF/10V/0402
LVDS out
1uF/6.3V/0402/NC
AVDD3V3 AVDD3V3
TX_AE0P TX_AE0N TX_AE1P TX_AE1N TX_AE2P TX_AE2N TX_AECKP TX_AECKN TX_AE3P TX_AE3N TX_AE4P TX_AE4N
AVDD3V3
(Pin38)
(Pin106)
AVDD3V3 AVDD12_RGB PR0P PB0P COM0 Y0P SOY0
C60 C59 0.1uF/10V/0402
DRAM RDQ0 RDQ1 RDQ2 RDQ3 RDQ4 RDQ5 RDQ6 RDQ7 RDQ8 RDQ9 RDQ10 RDQ11 RDQ12 RDQ13 RDQ14 RDQ15 RDQS1 RDQS1# RDQS0 RDQS0# RDQM1 RDQM0 1_A0 1_A1 1_A2 1_A3 1_A4 1_A5 1_A6 1_A7 1_A8 1_A9 1_A10 1_A11 1_A12 1_A13 RCLK0 RCLK0# 1_WE# 1_ODT 1_CAS# 1_RAS# 1_CKE 1_CS# 1_RST# 1_BA0 1_BA1 1_BA2
R33 AVDD33_XTAL_STB (Pin55) 0/0402
+ C62 10uF/6.3V/NC
R34 AVDD33_REG_STB (Pin23) C65 0.1uF/10V/0402
0/0402 3V3SB
Power Key AMP_MUTE OPCTRL0
(Pin8) C66 0.1uF/10V/0402
(OPCTRL1) R35
C64 0.1uF/10V/0402
3V3SB
VCCK
OPWRSB OIRI U0TX U0RX
0/0402/NC
LED_R
3V3SB
HDMI_HPD0 HDMI_SDA0 HDMI_SCL0 HDMI_HPD1 HDMI_SDA1 HDMI_SCL1 HDMI_CEC
HDMI HDMI_CEC RX0_2 RX0_2B RX0_1 RX0_1B RX0_0 RX0_0B RX0_C RX0_CB RX1_2 RX1_2B RX1_1 RX1_1B RX1_0 RX1_0B RX1_C RX1_CB
GPIO BL_ON/OFF LVDS_PWR_EN AC Drop_DET
217
AMP_MUTE LED_G LED_R SYS EE_WP PANEL SLET LIGHT_S_C LIGHT_S_D
BL_ON/OFF 11 LVDS_PWR_EN 11 AC Drop_DET 11 AMP_MUTE LED_G LED_R
4,5 11 11
SYS EE_WP PANEL SLET LIGHT_S_C LIGHT_S_D
4 7 11 11
(OPCTRL1)
HDMI_CEC RX0_2 RX0_2B RX0_1 RX0_1B RX0_0 RX0_0B RX0_C RX0_CB RX1_2 RX1_2B RX1_1 RX1_1B RX1_0 RX1_0B RX1_C RX1_CB
9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9
System IO OPWRSB ORESET# OXTALI OXTALO OIRI U0TX U0RX SDA_SYSTEM SCL_SYSTEM
OPWRSB 11 ORESET# 4 OXTALI 4 OXTALO 4 OIRI 11 U0TX 4,6 U0RX 4,6 SDA_SYSTEM 4,5,7 SCL_SYSTEM 4,5,7
HDMI_SDA0 HDMI_SCL0 HDMI_HPD0 HDMI_SDA1 HDMI_SCL1 HDMI_HPD1
HDMI_SDA0 HDMI_SCL0 HDMI_HPD0 HDMI_SDA1 HDMI_SCL1 HDMI_HPD1
C61 0.1uF/10V/0402
0.1uF/10V/0402/NC
Standby Power
3V3SB
C63 4.7uF/6.3V
6
(Pin121) C58
AVDD33_PLLGP
AVDD33_REG_STB AVDD10_LDO ORESET# ADIN0 SAR0
CVBS0P
AVDD3V3
C56 0.1uF/10V/0402
VCCK
10 10
C55 0.1uF/10V/0402
(Pin43)
AVDD12_DEMOD CVBS0P
0/0402/NC
FAT_INFAT_IN+
Demod IF C53 0.1uF/10V/0402
C54 0.1uF/10V/0402
R32
6 6 6 6 6
AVDD3V3
(Pin36) AVDD12_RGB
R30 0/0402 OXTALO OXTALI AVDD33_DEMOD FAT_INFAT_IN+
SOY0 Y0P COM0 PB0P PR0P
CVBS
AVDD1V2
54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
D
SOY0 Y0P COM0 PB0P PR0P
0.1uF/10V/0402
C52 0.1uF/10V/0402
AVDD3V3_HDMI1 RX0_CB RX0_C RX0_0B RX0_0 RX0_1B RX0_1 RX0_2B RX0_2 RX1_CB RX1_C RX1_0B RX1_0 RX1_1B RX1_1 RX1_2B RX1_2 AVDD1V2_HDMI1
USB_DM0 USB_DP0
YPbPr 0
C50
For improve Audio AADC performance
VCCK
24K/1%/0402
AVDD3V3
RDQ6 RDQ2 DDRV RDQ0 RDQ11 RDQ9 RDQ13 DDRV RDQ15 RDQM1 VCCK RVREF RDQS0 RDQS0# DDRV RCLK0# RCLK0 RDQM0 RDQS1 RDQS1# DDRV RDQ12 RDQ14 RDQ10 RDQ8 RDQ1 DDRV RDQ3 RDQ7 RDQ5 VCCK REXT R37
C68 0.1uF/10V/0402
C49 4.7uF/6.3V C51 0.1uF/10V/0402
163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 R38 1K/1%/0402
AVDD33_AADC FB11 SBK160808T-800Y 0.4A
(Pin199) AVDD3V3_HDMI1
R24 0/0402
0.1uF/10V/0402 1uF/6.3V/0402
AVDD33_XTAL_STB
YPbPr_L_In0
YPbPr_R_In0 AVDD33_AADC
AVDD33_DAC
R26 0/0402/NC
R25 0/0402/NC
IFAGC AOSDATA0_1 AMP_BCK_1 AMP_LRCLK_1 AMP_MCK_1 SPDIF_OUT
C48
XTALO XTALI AVSS33_DEMOD AVDD33_DEMOD ADCINN_DEMOD ADCINP_DEMOD AVSS12_DEMOD AVDD12_DEMOD CVBS0P SY SC AVDD33_CVBS AVSS33_CVBS AVDD33_PLLGP VCCK VDACX_OUT AVDD33_VDAC AVSS12_RGB AVDD12_RGB PRP PBP COM YP SOY RP COM GP SOG BP HSYNC VSYNC AVDD33_VGA_STB AVDD10_LDO ORESET_ ADIN0_SRV ADIN1_SRV VCCK OPWRSB OIRI U0TX U0RX VGA_SDA VGA_SCL OPCTRL2 OPCTRL1 OPCTRL0 VCC3IO_STB HDMI_0_HPD HDMI_0_SDA HDMI_0_SCL HDMI_1_HPD HDMI_1_SDA HDMI_1_SCL HDMI_CEC
C67 0.1uF/10V/0402
RVREF
C40 10nF/50V/0402
10uF/10V
(Pin57)
VMID_AADC
B
R36 1K/1%/0402
C44 0.1uF/10V/0402
ADAC_3V3
DVDD3V3
AE4P AE4N AE3P AE3N AECKP AECKN AE2P AE2N AE1P AE1N AE0P AE0N AVDD33_LVDSA AO4P AO4N AO3P AO3N AOCKP AOCKN AO2P AO2N AO1P AO1N AO0P AO0N VCCK VCCK AVDD33_MEMPLL RCKE RA10 RBA1 RA4 RA1 RA6 RA8 RA11 RA12 RRAS_ RCAS_ VCC2IO RWE_ RA0 RA13 RA9 RRESET_ RA7 RA2 RA5 RA3 RBA2 RBA0 RCS_ RODT RDQ4
DDRV
C41 C43
C47
BL_ON/OFF SCL_SYSTEM SDA_SYSTEM
PSRC_WR SYS EE_WP PANEL SLET
PDD2 PDD1 PDD0
BL_DIMMING
VCCK
DVDD3V3
SDA_TUNER SCL_TUNER
TX_AO4P TX_AO4N TX_AO3P TX_AO3N TX_AOCKP TX_AOCKN TX_AO2P TX_AO2N TX_AO1P TX_AO1N TX_AO0P TX_AO0N
109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162
+
22pF/50V/0402 C45
RDQ6 RDQ2 VCC2IO RDQ0 RDQ11 RDQ9 RDQ13 VCC2IO RDQ15 RDQM1 VCCK RVREF RDQS0 RDQS0_ VCC2IO RCLK0_ RCLK0 RDQM0 RDQS1 RDQS1_ VCC2IO RDQ12 RDQ14 RDQ10 RDQ8 RDQ1 VCC2IO RDQ3 RDQ7 RDQ5 VCCK REXT AVDD33_USB USB_DM USB_DP VCCK AVDD33_HDMI_1_RX HDMI_0_RX_CB HDMI_0_RX_C HDMI_0_RX_0B HDMI_0_RX_0 HDMI_0_RX_1B HDMI_0_RX_1 HDMI_0_RX_2B HDMI_0_RX_2 HDMI_1_RX_CB HDMI_1_RX_C HDMI_1_RX_0B HDMI_1_RX_0 HDMI_1_RX_1B HDMI_1_RX_1 HDMI_1_RX_2B HDMI_1_RX_2 AVDD12_HDMI_1_RX
TX_AE4P TX_AE4N TX_AE3P TX_AE3N TX_AECKP TX_AECKN TX_AE2P TX_AE2N TX_AE1P TX_AE1N TX_AE0P TX_AE0N
AMP_MCK
(Pin65) AVDD33_DAC
R20 0/0402
(Pin136) AVDD33_MEMPLL
R21 0/0402
AVDD12_LVDSA GPIO2 GPIO1 GPIO0 VCC3IO POWE_ PAALE PACLE POCE0_ POOE_ PARB_ PDD7 PDD6 PDD5 PDD4 PDD3 PDD2 PDD1 PDD0 POCE1_ GPIO3 VCCK FSRC_WR DEMOD_TSDATA0 DEMOD_TSSYNC DEMOD_TSVAL DEMOD_TSCLK SCL_SYSTEM SDA_SYSTEM VCC3IO DEMOD_RST RF_AGC IF_AGC AOSDATA0 AOBCK AOLRCK AOMCLK ASPDIFO0 VCCK AR1_ADAC AR0_ADAC AL1_ADAC AL0_ADAC AVDD33_DAC AVSS33_DAC AIN2_L_AADC AIN2_R_AADC AIN1_L_AADC AIN0_L_AADC AIN1_R_AADC AIN0_R_AADC AVDD33_AADC VMID_AADC AVDD33_XTAL_STB
U6
ADAC_3V3
AVDD3V3 22pF/50V/0402
100/0402/NC
UART_Det ARC_SELECT PACLE POCE0# POOE# CP_C PDD7 PDD6 PDD5 PDD4
PSRC_WR
AMP_LRCLK
108 107 106 105 104 103 102 101 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55
LVDS_PWR_EN
E-Fuse (Pin108) R27 4.7K/1%/0402
R22 33/0402
R104 100/0402
AVDD1V2 100/0402
R19 33/0402
C39
C46 0.1uF/10V/0402 D
22pF/50V/0402 C38
C42 0.1uF/10V/0402
AVDD3V3
Analog Normal Power
AMP_BCK
R18 33/0402
AMP_LRCLK_1
AC Drop_DET
AVDD1V2
AMP_BCK_1
Add R99 reserve for LED flash when AC-ON
LED_G
C37 0.1uF/10V/0402
1
AOSDATA0
R17 33/0402
9 9 9 9 9 9
RDQ0 RDQ1 RDQ2 RDQ3 RDQ4 RDQ5 RDQ6 RDQ7 RDQ8 RDQ9 RDQ10 RDQ11 RDQ12 RDQ13 RDQ14 RDQ15 RDQS1 RDQS1# RDQS0 RDQS0# RDQM1 RDQM0 1_A0 1_A1 1_A2 1_A3 1_A4 1_A5 1_A6 1_A7 1_A8 1_A9 1_A10 1_A11 1_A12 1_A13 RCLK0 RCLK0# 1_WE# 1_ODT 1_CAS# 1_RAS# 1_CKE 1_CS# 1_RST# 1_BA0 1_BA1 1_BA2
TX_AO0P TX_AO0N TX_AO1P TX_AO1N TX_AO2P TX_AO2N TX_AOCKP TX_AOCKN TX_AO3P TX_AO3N TX_AO4P TX_AO4N
8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8
BL_DIMMING
TX_AE0P TX_AE0N TX_AE1P TX_AE1N TX_AE2P TX_AE2N TX_AECKP TX_AECKN TX_AE3P TX_AE3N TX_AE4P TX_AE4N
7 7 7 7 7 7 7 7 7 7 7 7
TX_AO0P TX_AO0N TX_AO1P TX_AO1N TX_AO2P TX_AO2N TX_AOCKP TX_AOCKN TX_AO3P TX_AO3N TX_AO4P TX_AO4N
7 7 7 7 7 7 7 7 7 7 7 7
BL_DIMMING
C
11
USB USB_DM0 USB_DP0
USB_DM0 USB_DP0
7 7
PACLE
4
POCE0# POOE# PDD7 PDD6 PDD5
4 4 4 4 7
NAND/Nor Flash PACLE POCE0# POOE# PDD7 PDD6 PDD5
UART_Det ARC_SELECT CP_C
PDD1 PDD0
B
UART_Det 4 ARC_SELECT 9 CP_C 6 TP15 TP16
Tuner and Demod TS I/F IFAGC
IFAGC
10
SPDIF Out
DDRV
SPDIF_OUT
AVDD3V3 R39
(Pin41)
SPK
AVDD33_PLLGP
AMP_MCK AMP_LRCLK AMP_BCK AOSDATA0
0/0402 C69 10uF/10V/0805
C70
C71 1uF/6.3V/0402
0.1uF/10V/0402
C72
C73 0.1uF/10V/0402
0.1uF/10V/0402
C74
C75 0.1uF/10V/0402
C76 0.1uF/10V/0402
1uF/6.3V/0402
C77 10nF/50V/0402
Core Power ( Close to Mainchip )
DVDD3V3
VCCK (Pin79)
A
C78
(Pin104)
C79 0.1uF/10V/0402
1uF/6.3V/0402
C80 0.1uF/10V/0402
(Pin18) + C81 PXE100uF/16V/NC
C82 4.7uF/6.3V
SAR0 Power Key
AMP_MCK 5 AMP_LRCLK 5 AMP_BCK 5 AOSDATA0 5
(Pin70)
C84 1uF/6.3V/0402
0.1uF/10V/0402
(Pin87) C85
0.1uF/10V/0402
(Pin134)
(Pin135)
C87 0.1uF/10V/0402
(Pin135)
C88 0.1uF/10V/0402
(Pin173)
C89
SAR0 Power Key
11 11
SDA_TUNER SCL_TUNER
ADIN0 LIGHT_S_C LIGHT_S_D
Add R73 & R102 if change ACD pin to OPCTRL0
(Pin40) C83
6,9
(Pin193)
C90 0.1uF/10V/0402
0.1uF/10V/0402
(Pin198)
C91
AUDIO ADC IN
Key
Near to IC
3.3V IO Power ( Close to Mainchip)
SPDIF_OUT
R73 R40 R41 R42
YPbPr_R_In0 YPbPr_L_In0
YPbPr_R_In0 YPbPr_L_In0
6 6
SDA_TUNER 10 SCL_TUNER 10 0/0402 0/0402/NC 10/0402 10/0402
LIGHT_S_C SCL_SYSTEM SDA_SYSTEM
SAR1
11
A
3V3SB
C92 0.1uF/10V/0402
PDD2
0.1uF/10V/0402
R67
10/1%/0402 BL_ERR
R102 47K/1%/0402/NC
OPCTRL0
R103
100/0402/NC
BL_ERR
11
AC Drop_DET
Title
COMPAL OPTOELECTRONICS CO., LTD SCHEMATIC,M/B VTV-L32616
Size
Docum ent Num ber
Date:
Tues day, Novem ber 27, 2012
Rev
1
XXXXXX 5
4
3
2
1
Sheet
3
of
11
5
4
3
2
1
DVDD3V3
SPI FLASH DVDD3V3
R43 4.7K/1%/0402
R45 4.7K/1%/0402 U17
U7
1 2 3 4 5 6 7 8
DVDD3V3
D
R44 4.7K/1%/0402
3 3
POCE0# PDD7
POCE0# PDD7
NC/SIO3 VCC NC PO2 PO1 PO0 CS# SO/SIO1/PO7
16 15 14 13 12 11 10 9
SCLK SI/SIO0 PO6 PO5 PO4 PO3 GND WP#/SIO2
POOE# PDD6
POOE# PDD6
3 3
1 2 3 4
POCE0# PDD7 WP#
CS# DOUT WP#/VPP VSS
VCC HOLD# CLK DIN
8 7 6 5
DVDD3V3 R140 10K/0402/NC POOE# PDD6
D
MX25L6406EM2I-12G/NC
WP#
MX25L12845EM1-10G SOP16 C94 0.1uF/10V/0402
C93 0.1uF/10V/0402
RESET Circuit
3V3SB
U8 3V3SB
VCC /RESET
27MHz CRYSTAL
1
3
OXTALI
2
R81 0/0402
OXTALO
ORESET#
3
R47
C95 10nF/50V/0402 100K/1%/0402/NC
1 2
(Low reset) OXTALO
ORESET# J1
GND AX6901ERA
Y1 27MHz/20pF/30ppm/S/2P OXTALI
R46 1K/1%/0402
POR 3
3 HDR_1X2_H2031_P2_SW/NC
C
C
C96
C97
27pF/50V/0402
27pF/50V/0402
STRAPPING (Default : Serial boot) UART0
3V3SB
3V3SB
3V3SB
(OPCTRL1) R87 4.7K/1%/0402
R51 4.7K/1%/0402/NC
R52 4.7K/1%/0402
3,5 AMP_MUTE
UART_Det
100/1%/0402 100/1%/0402
R82
100/1%/0402
For ESD
1
8/31 Reserve UART_Detect
R53 R54
2
B
1
U0RX U0TX
2
3
U0RX U0TX
AMP_MUTE
R48
10K/1%
R50
10K/1%
PACLE
3
DVDD3V3
1 2 3 4
VD2 SESD0402P1BN-0450-090/NC
3,6 3,6
VD1 SESD0402P1BN-0450-090/NC
J2
R49
10K/1%/NC PACLE
JWT A2001WV2-4P
(Place on TOP_Layer)
A2001WV2-4P-6T2-F2
B
SYS EE_WP
SYSTEM EEPROM
DVDD3V3 DVDD3V3 DVDD3V3
1 2 3
R58 4.7K/1%/0402/NC JWT A2001WV2-3P A2001WV2-3P-6T2-F2
U5 depend on customer request. If yes,need one more GPIO to control pin 7 of U5
A
3
I2C ADDRESS "A0"
R55 4.7K/1%/0402
3,5,7 SCL_SYSTEM 3,5,7 SDA_SYSTEM
SYS EE_WP
64K bit
R57 R56 4.7K/1%/0402 4.7K/1%/0402
J3 SCL_SYSTEM SDA_SYSTEM
DVDD3V3
U9 SYS EE_WP SCL_SYSTEM SDA_SYSTEM
8 7 6 5
VCC WP SCL SDA
E0 E1 E2 GND
1 2 3 4
BR24T64FJ-WGE2 A
Title
COMPAL OPTOELECTRONICS CO., LTD SCHEMATIC,M/B VTV-L32616
Size
Document Number
Date:
Tuesday, November 27, 2012
Rev
1
XXXXXX 5
4
3
2
Sheet 1
4
of
11
5
4
3
2
1
L2 SMTDR75-150K 15uH/2A SPK_OUTL+
SDA
1K/1%
DVDD C131 0.1uF/50V
C132
1uF/50V/0805
33nF/50V
C114
C115
0.1uF/50V
1uF/50V/0805 C117
C116
2
3
1 OUT_A
PVDD_A
PVDD_A
OUT_D
PVDD_D
PVDD_D
BST_D
11
C119
C120
10nF/50V/NC 0.1uF/50V/NC
48 47 46 AMP_VCC
45
AD mode : (1) Mount :C131 ,C141 ;C159 ,C163 ;C134 (2) Mount :C121 ;C158 ;C134 BD mode : (1) Mount :C131 ,C141 ;C159 ,C163
44 43
C125
33nF/50V
42
C122
33nF/50V
C123
C124
0.1uF/50V/NC
1uF/50V/0805/NC
AMP_VCC
41 40
C
39 38 37
L4 SMTDR75-150K 15uH/2A
AMP_VCC
SPK_OUTR+
11
SPK_OUTR-
11
R76 3.3/1206/NC C133 0.47uF/50V/0805/NC
C137
D
36
35
34
33
GVDD_OUT
VREG
10uF/10V/0805
C118
1uF/50V/0805
R75
AMP_RST
33nF/50V
100K/1%
C130
R74
0.1uF/50V
AMP_PDN
32
R79 10K/0402/NC
31
26
AMP_PDN
PGND_CD
0.1uF/50V
AMP_MUTE Low : Enable High : Disable
PGND_CD
SCL
1uF/50V/0805
24
OUT_C TH_PD
23
AMP_SCL
PVDD_C
SDIN
AGND
AMP_SDA
SCLK
GND
22
30
21
10/0402
29
10/0402
R70
PVDD_C
51
R69
LRCLK
DVSS
20
DVDD
10/0402
28
R68
BST_B BST_C
25
R71 4.7K/1%
3,4 AMP_MUTE
4
TAS5707
/PDN
STEST
19
C110
10nF/50V/NC 0.1uF/50V/NC
R63 3.3/1206/NC
0.68uF/25V
0.1uF/50V
VR_DIG
27
AOSDATA0
BST_A
22.1K/1% R62
PVDD_B
/RESET
AMP_BCK
3
C113 2.2uF/16V/0805/NC
DVSSO
C121
18
3
PVDD_B
C109
SPK_OUTL-
1uF/50V/0805
10K/1%
1uF/50V/0805
C
7
OUT_B U10
17
AMP_LRCLK
6
PGND_AB OSC_RES
R66
AMP_PDN
3
SSTIMER
PGND_AB
MCLK
18.2K/1%
16
AMP_PDN High : Enable Low : Disable
5
470
/FAULT
C104 0.68uF/25V
L3 SMTDR75-150K 15uH/2A
C127
R65
C103 0.47uF/50V/0805/NC
C126
15
10/0402
C129
R64
C128
AMP_MCK
AVDD
AMP_VCC
GVDD_OUT
14 3
PLL_FLTP PLL_FLTM
13
VR_ANA
DVDD
4.7nF/50V
11 10
12
4.7nF/50V
C112
NC
C111
OC_ADJ
0.1uF/50V
R61
C106
10uF/10V/0805
8
C105
0.1uF/50V
9
C102
10uF/10V/0805
11
R59 3.3/1206/NC
AVSS
C101
0.1uF/50V
470
C100
10uF/10V/0805
R60
C99
0.1uF/50V
C107
C98 D
C108
FB12 PBY160808T-300Y 3A
47nF/16V
47nF/16V
DVDD
DVDD3V3
C134 0.68uF/25V
C135
C136
10nF/50V/NC 0.1uF/50V/NC
C139
C138
0.1uF/10V/0402
Delay 100ms B
B
L5 SMTDR75-150K 15uH/2A
R77 3.3/1206/NC C140 0.68uF/25V
3,4,7 SDA_SYSTEM 3,4,7 SCL_SYSTEM
SDA_SYSTEM SCL_SYSTEM
R78
10/0402
AMP_SDA
R80
10/0402
AMP_SCL
C141
C142
10nF/50V/NC 0.1uF/50V/NC
A
A
Title
COMPAL OPTOELECTRONICS CO., LTD SCHEMATIC,M/B VTV-L32616
Size
Document Number
Date:
Tuesday, December 11, 2012
Rev
1
XXXXXX 5
4
3
2
Sheet 1
5
of
11
5
4
Component input
3
2
A/V input
Close to IC
OPT SPDIF out
Close to CONN.
IO1 1x5_CX_COMPO-AUDIO_SW_H8.5
3
CVBS0P
C143
CVBS0P
3
3
SOY0
Y0P
Y G
100/1%/0402 47nF/16V/0402 SOY0
R84 10/1%/0402
C145
Y-V_IN
SPDIF_OUT
3,9
2/1 Modify
GND GND
IN VCC
1 5V_SW
2
D
C170 100pF/25V/0402/NC
FB16 PBY160808T-300Y 3A
Y-V_IN
1.5nF/50V/0402 C147
Y0P
T1 S1
R123 47/1%/0402
IO4
6 7
R83 D
1
R85
Pb G
R86
100/1%/0402
T2 S2
Pb_HD
GND
18/1%/0402
3 C171 0.1uF/10V/0402
YUQIU/OPTICAL_V
10nF/50V/0402
13
C148 10pF/50V/0402
R88
C149
R90 0/0402
100/1%/0402
C
3
PB0P
PB0P
L G SW R G
R92
C150
Pb_HD 100/1%/0402
10nF/50V/0402
Pr_HD
T4 S4
YBRL_IN0
B5 T5 S5
YBRR_IN0
PF
10nF/50V/0402
R91
T3 S3
R100
100/0402 R205
Modify form last version
D_TX
0/NC YBRL_IN0
5V_SW R127
R101
100/0402
1
D_RX FB15
R94 10pF/50V/0402
1 R96
C153
PBY160808T-300Y 3A C224
100/1%/0402
10pF/50V/0402
C
3
Q5 U0RX
10pF/50V/NC
3,4
R121
18/1%/0402 C155
CP_C
LMBT3904L
B
10pF/50V/NC
Pr_HD
10nF/50V/0402
2 47K/1%/0402
C371
2
PR0P
1
2
R95 3
R144
D_RX 56/1%/0402
PR0P
2
10K/0402
18/1%/0402 C152
C
COM0
Pr G
E
COM0
PF
1
3
12
56/1%/0402
R89
R98
1
2
56/1%/0402
4.7K/0402
CP_C = "Low" UART communication workable. Close to CONN.
B
YBRL_IN0
C151
10uF/6.3V
Close to IC
30K/1%/0402
R93
YPbPr_L_In0
Q4 LMBT3906L
FB14 YPbPr_L_In0
3
E
D_TX
C
U0TX
10pF/50V/NC
C315 10pF/50V/NC
R214
1
2 10K/0402
3
A
Pb_HD
VD9
2
2
VD8
YBRL_IN0
YBRR_IN0
VD10
1
Pr_HD
1
Y-V_IN
VD11
A
VD12
2
YPbPr_R_In0
1
YPbPr_R_In0
2
R97
1
30K/1%/0402
2
10uF/6.3V
1
C154
3,4
B
1
C369
2
2
1
PBY160808T-300Y 3A
YBRR_IN0
B
CP_C = "High" UART communication disable.
Title
COMPAL OPTOELECTRONICS CO., LTD SCHEMATIC,M/B VTV-L32616
SESD0402P1BN-0450-090/NC SESD0402P1BN-0450-090/NC SESD0402P1BN-0450-090/NC SESD0402P1BN-0450-090/NC SESD0402P1BN-0450-090/NC
5
4
3
Size
Document Number
Date:
Tuesday, November 27, 2012
Rev
1
XXXXXX 2
Sheet 1
6
of
11
5
4
3
2
1
WXGA A2006WV0-2X10P FHD A2006WV0-2X20P
(PIN21~PIN40) (PIN1~PIN40)
CN1 A2006WR0-2X20P
D
32
CN5 P-TWO 30P 1.00MM/NC
30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
TX_AOCKP TX_AOCKN TX_AO2P TX_AO2N TX_AO1P TX_AO1N TX_AO0P TX_AO0N
LVDS_SEL C
3
TX_AO1P
3
TX_AO2P
3
TX_AOCKP
3
TX_AO3P
3
TX_AO4P
TX_AO0P
39
TX_AO1P
37
TX_AO2P
35
TX_AOCKP
33
TX_AO3P
31
TX_AO4P
29 27 25 23
LVDS_PWR
21 19 17 15
31
LVDS_PWR LVDS_PWR LVDS_PWR LVDS_PWR
TX_AO0P
3
TX_AE0P
3
TX_AE1P
3
TX_AE2P
3
TX_AECKP
3
TX_AE3P
3
3
TX_AE4P
PANEL SLET
PANEL_SDA_P
13
TX_AE0P
11
TX_AE1P
9
TX_AE2P
7
TX_AECKP
5
TX_AE3P
3
TX_AE4P
1
39
40
37
38
35
36
33
34
31
32
29
30
27
28
25
26
23
24
21
22
19
20
17
18
15
16
13
14
11
12
9
10
7
8
5
6
3
4
1
PANEL SLET
R130
100/0402/NC
S
TX_AO3P TX_AO3N
3
R131
10/0402
2
D
40
TX_AO0N
38
TX_AO1N
36
TX_AO2N
34
TX_AOCKN
32
TX_AO3N
30
TX_AO4N
28
LVDS_SEL
TX_AO0N
3
TX_AO1N
3
TX_AO2N
3
TX_AOCKN
3
TX_AO3N
3
TX_AO4N
3
LVDS_PWR
R128 4.7K/NC
26 R129 1.8K/NC
24 LVDS_PWR
22
LVDS_PWR
20 C172
C173 0.1uF/50V
18 ELNA SE100uF/16V
16 14
PANEL_SCL_P
12
TX_AE0N
10
TX_AE1N
8
TX_AE2N
6
TX_AECKN
4
TX_AE3N
2
TX_AE4N
C
TX_AE0N
3
TX_AE1N
3
TX_AE2N
3
TX_AECKN
3
TX_AE3N
3
TX_AE4N
3
LVDS_SEL
EQUAL LENGTH and DIFFERENTIAL IMPEDANCE 90ohm
+5V_USB0
6
B
SDA_SYSTEM
B
Q6 2N7002/NC
L77 CL-2M2012-181JT
1 2 3 4
SDA_SYSTEM
SCL_SYSTEM
3 3
3,4,5
SCL_SYSTEM 3,4,5
1
USB_DM0 USB_DP0
SDA_SYSTEM PANEL_I2C_EN
VD18
VD19
SCL_SYSTEM
S
+ C174
0.1uF/10V/0402 10uF/16V/0805
R132
10/0402
PANEL_SCL_P R133
10/0402
PDD5
PDD5
3
G
2
PANEL_I2C_EN
2
C175
D
5
1
USB_DM0 USB_DP0
PANEL_SDA_P
G
IO6 USB_RA_YQ
D
USB
SESD0402P1BN-0450-090/NC SESD0402P1BN-0450-090/NC
Q7 2N7002/NC
PANEL_I2C_EN R134 10K/0402
USB Power Control FB17 PBY160808T-121Y 2.5A
A
F1 1206L075THYR
+5V_USB0 A
5V_SW
USB POWER Title
COMPAL OPTOELECTRONICS CO., LTD SCHEMATIC,M/B VTV-L32616
Size
Document Number
Date:
Tuesday, November 27, 2012
Rev
1
XXXXXX 5
4
3
2
Sheet 1
7
of
11
5
4
DDR3#1
3
1Gb DDR3-1600 for H5TQ1G63DFR-PBC U11 H5TQ1G63DFR-PBC_MTK
2
1
RDQ0 RDQ1 RDQ2 RDQ3 RDQ4 RDQ5 RDQ6 RDQ7 RDQ8 RDQ9 RDQ10 RDQ11 RDQ12 RDQ13 RDQ14 RDQ15
Damping and Termination for CLK
Close to Mainchip
Close to DRAM
D
C
RDQ0 RDQ1 RDQ2 RDQ3 RDQ4 RDQ5 RDQ6 RDQ7 RDQ8 RDQ9 RDQ10 RDQ11 RDQ12 RDQ13 RDQ14 RDQ15
E3 F7 F2 F8 H3 H8 G2 H7 D7 C3 C8 C2 A7 A2 B8 A3
RDQS1 RDQS1# RDQS0 RDQS0# RDQM1 RDQM0
C7 B7 F3 G3 D3 E7 T2
B_RST#
L8
ZQ1
R141 240/0402
UDQS UDQS# LDQS LDQS# UDM LDM RESET# ZQ
DDRV
A1 A8 C1 C9 D2 E9 F1 H2 H9 B2 D9 G7 K2 K8 N1 N9 R9 R1
B
DDRV
R145 1K/1%/0402
DQ0 DQ1 DQ2 DQ3 DQ4 DQ5 DQ6 DQ7 DQ8 DQ9 DQ10 DQ11 DQ12 DQ13 DQ14 DQ15
C176 0.1uF
A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10/AP A11 A12/BC# A13 NC_0 NC_1 NC_2 NC_3 NC_4 NC_6 BA0 BA1 BA2 CK CK# CS# CAS# ODT RAS# WE# CKE
VDDQ_0 VDDQ_1 VDDQ_2 VDDQ_3 VDDQ_4 VDDQ_5 VDDQ_6 VDDQ_7 VDDQ_8
VSSQ_0 VSSQ_1 VSSQ_2 VSSQ_3 VSSQ_4 VSSQ_5 VSSQ_6 VSSQ_7 VSSQ_8
VDD_0 VDD_1 VDD_2 VDD_3 VDD_4 VDD_5 VDD_6 VDD_8 VDD_7
VSS_0 VSS_1 VSS_2 VSS_3 VSS_4 VSS_5 VSS_6 VSS_7 VSS_8 VSS_9 VSS_10 VSS_11
N3 P7 P3 N2 P8 P2 R8 R2 T8 R3 L7 R7 N7 T3
B_A0 B_A1 B_A2 B_A3 B_A4 B_A5 B_A6 B_A7 B_A8 B_A9 B_A10 B_A11 B_A12 B_A13
RCLK0
R135 100/0402 RCLK0#
RP1 1_WE# 1_CAS# 1_RAS# 1_A12 B_BA0 B_BA1 B_BA2 RCLK0 RCLK0# B_CS# B_CAS# B_ODT B_RAS# B_WE# B_CKE
1_ODT 1_CS# 1_BA0 1_BA2
1 3 5 7
1 3 5 7
1_A3 1_A5 1_A2 1_A7
1 3 5 7
1_A4 1_BA1 1_A10 1_CKE
1 3 5 7
1_A11 1_A8 1_A6 1_A1
1 3 5 7
1_A0 1_A1 1_A2 1_A3 1_A4 1_A5 1_A6 1_A7 1_A8 1_A9 1_A10 1_A11 1_A12 1_A13
100R/0804 2 B_WE# 4 B_CAS# 6 B_RAS# 8 B_A12
100/0402B_ODT 100/0402B_CS# 100/0402B_BA0 100/0402B_BA2
R136 R137 R138 R139 RP2
1_RST# 1_A9 1_A13 1_A0
B1 B9 D1 D8 E2 E8 F9 G1 G9 A9 B3 E1 G8 J2 J8 M1 M9 P1 P9 T1 T9
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
RDQS1 RDQS1# RDQS0 RDQS0# RDQM1 RDQM0
3 3 3 3 3 3
D
Damping for DDR ADDR/CMD
J1 J9 L1 L9 M7 T7 M2 N8 M3 J7 K7 L2 K3 K1 J3 L3 K9
RDQS1 RDQS1# RDQS0 RDQS0# RDQM1 RDQM0
RDQ0 RDQ1 RDQ2 RDQ3 RDQ4 RDQ5 RDQ6 RDQ7 RDQ8 RDQ9 RDQ10 RDQ11 RDQ12 RDQ13 RDQ14 RDQ15
100R/0804 2 B_RST# 4 B_A9 6 B_A13 8 B_A0
RP3
100R/0804 2 B_A3 4 B_A5 6 B_A2 8 B_A7
RP4
100R/0804 2 B_A4 4 B_BA1 6 B_A10 8 B_CKE
RP5
RCLK0 RCLK0# 1_WE# 1_ODT 1_CAS# 1_RAS# 1_CKE 1_CS# 1_RST# 1_BA0 1_BA1 1_BA2
1_A0 1_A1 1_A2 1_A3 1_A4 1_A5 1_A6 1_A7 1_A8 1_A9 1_A10 1_A11 1_A12 1_A13
3 3 3 3 3 3 3 3 3 3 3 3 3 3
RCLK0 RCLK0# 1_WE# 1_ODT 1_CAS# 1_RAS# 1_CKE 1_CS# 1_RST#
3 3 3 3 3 3 3 3 3
1_BA0 1_BA1 1_BA2
3 3 3
C
100R/0804 2 B_A11 4 B_A8 6 B_A6 8 B_A1
B
DDRV
C177 0.1uF/10V/0402
R146 1K/1%/0402 DDRV
H1
RVREF1
R147 1K/1%/0402
C178 0.1uF/10V/0402
VREFDQ VREFCA
M8
RVREF2
C179 0.1uF/10V/0402
R148 1K/1%/0402
C180 C181 C182 C183 0.1uF/10V/0402 0.1uF/10V/0402 0.1uF/10V/0402 0.1uF/10V/0402
A
A
C184 C185 C186 0.1uF/10V/0402 0.1uF/10V/0402 10uF/16V/0805 Title
COMPAL OPTOELECTRONICS CO., LTD SCHEMATIC,M/B VTV-L32616
Size
Document Number
Rev
1
XXXXXX Date: 5
4
3
2
Tuesday, November 27, 2012
Sheet 1
8
of
11
5
4
3
CEC
R149
HDMI port 1
SESD0402P1BN-0450-090/NC 2 1 VD21
R150 47K/1%/0402
R151 47K/1%/0402
100/1%/0402 100/1%/0402
L82 QTC24CG900U
RX1_2 RX1_2B
CEC
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
L83 QTC24CG900U
RX1_1 RX1_1B
L84 QTC24CG900U
RX1_0 RX1_0B
L85 QTC24CG900U
RX1_C RX1_CB TP2
R152 R153
cab_p
HDMI_SCL HDMI_SDA
B
C B
Q9 E
47K/1%/0402 C
R157 100K/1%/0402
Q8 E
R159
LMBT3904LT1G
LMBT3904LT1G
20 21 22
SESD0402P1BN-0450-090/NC 1 VD25 2
5V_SW
SESD0402P1BN-0450-090/NC 1 VD24 2
C
HDMI_HPD1
SESD0402P1BN-0450-090/NC 1 VD23 2
R156 909/1%/0402
SESD0402P1BN-0450-090/NC 1 VD26 2
HDMI1-5V R154 75/1%/0402 R155 47K/1%/0402
3
IO7
HDMI_PLUGPWR1
HDMI_SCL1 HDMI_SDA1
HDMI_CEC
1
100/1%/0402
For ESD Test
D
HDMI_CEC
2
RX0_2 RX0_2B RX0_1 RX0_1B RX0_0 RX0_0B RX0_C RX0_CB
TMDSD2+ DSHLD0 TMDSD2TMDSD1+ DSHLD1 TMDSD1TMDSD0+ DSHLD2 TMDSD0TMDSC+ CSHLD0 TMDSCCEC NC SCL SDA DDC_GND VCC5 HPD
RX1_2 RX1_2B RX1_1 RX1_1B RX1_0 RX1_0B RX1_C RX1_CB
RX0_2 RX0_2B RX0_1 RX0_1B RX0_0 RX0_0B RX0_C RX0_CB
3 3 3 3 3 3 3 3
RX1_2 RX1_2B RX1_1 RX1_1B RX1_0 RX1_0B RX1_C RX1_CB
3 3 3 3 3 3 3 3
HDMI_SDA0 HDMI_SCL0 HDMI_HPD0
SHLD0 SHLD1 SHLD2
HDMI_SCL1 HDMI_SDA1 HDMI_HPD1
FREEPOT/HDMI_SMD_V
D
HDMI_SDA0 HDMI_SCL0 HDMI_HPD0
3 3 3
HDMI_SCL1 HDMI_SDA1 HDMI_HPD1
3 3 3
5V_SW C
HDMI_PLUGPWR1
D1
BAT54C/NC 1
HDMI_PLUGPWR1
DVDD3V3
3 DVDD3V3 2
R158
HDMI1-5V
R209 10K
0/0402 U25 3 ARC_SELECT 3,6 SPDIF_OUT
1 2 3
OE VCC A GND Y
5 C86 4
R206
1
180
2
HDMI_ARC
1uF/6.3V/0402
SN74LVC1G125DCKR C144 0.1uF/10V/0402
HDMI port 0 HDMI_PLUGPWR0
R160 47K/1%/0402
R161 47K/1%/0402
RX0_2 RX0_2B
CEC
RX0_1 RX0_1B RX0_0 RX0_0B RX0_C RX0_CB HDMI_ARC
HDMI_SCL0 HDMI_SDA0
R162 R163
R211
L78 QTC24CG900U
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
L79 QTC24CG900U L80 QTC24CG900U L81 QTC24CG900U
0/0402
100/1%/0402 100/1%/0402
E
E
Q11
Q10
LMBT3904LT1G
LMBT3904LT1G
20 21 22
SESD0402P1BN-0450-090/NC 1 VD41 2
B 47K/1%/0402
R167 100K/1%/0402
C C
R169
A
B
SESD0402P1BN-0450-090/NC 1 VD40 2
HDMI_HPD0 5V_SW
SESD0402P1BN-0450-090/NC 1 VD39 2
R166 909/1%/0402
SESD0402P1BN-0450-090/NC 1 VD38 2
HDMI0-5V R164 75/1%/0402 R165 47K/1%/0402
R208 100K
IO8 SESD0402P1BN-0450-090/NC 2 1 VD36
B
R207 82
TMDSD2+ DSHLD0 TMDSD2TMDSD1+ DSHLD1 TMDSD1TMDSD0+ DSHLD2 TMDSD0TMDSC+ CSHLD0 TMDSCCEC NC SCL SDA DDC_GND VCC5 HPD
B
SHLD0 SHLD1 SHLD2 FREEPOT/HDMI_SMD_V
5V_SW HDMI_PLUGPWR0
D2
A
BAT54C/NC 1
HDMI_PLUGPWR0
3 2
R168
HDMI0-5V Title
0/0402
COMPAL OPTOELECTRONICS CO., LTD SCHEMATIC,M/B VTV-L32616
Size
Document Number
Rev
1
XXXXXX Date: 5
4
3
2
Tuesday, November 27, 2012
Sheet 1
9
of
11
5
4
3
+3.3V_TUNER_1
2
1
+3.3V_TUNER FB18
+3.3V_TUNER
Depend on tuner SPEC.
PBY160808T-300Y 3A
0.1uF/10V/0402 330pF/50V/0402 10uF/10V/0805
NC NC SDA SCL +B1 [3.3V] NC NC NC IF AGC DIF+ DIF-
C188
C189
R170 R171 TUNER_CLK TUNER_DATA
1 2 3 4 5 6 7 8 9 10 11
TUNER_DATA TUNER_CLK
close to tuner
TU_AGC DIF1_OUT2 DIF1_OUT1
R175
4.7K/1%/0402 4.7K/1%/0402 R173 R174
C190 47pF/50V/0402
1
GND GND GND GND
TDST-H020F
D
SCL_TUNER
100/1%/0402 100/1%/0402
SCL_TUNER
3
C191 47pF/50V/0402
Near to Tuner
IFAGC_1
10K/1%/0402 SDA_TUNER
C192 47nF/16V/0402
2
12 13 14 15
C187
TDST-H020F
D
U12
SDA_TUNER
3
Close to TUNER
Tuner I2C
C
C194
C
C193 68pF/50V/0402/NC
47pF/50V/0402 C195 DIF1_OUT2 1uF/6.3V/0402
L6 CLS UPB160808T-121Y-N
L7
0
R177 100/1%/0402
R178 0/0402
FAT_IN-
FAT_IN-
3
FAT_IN+
3
R179 200/1%/0402
C196 DIF1_OUT1
L9 1uF/6.3V/0402
0
L8 CLS UPB160808T-121Y-N C198
R180 100/1%/0402
R181 0/0402
FAT_IN+
C197 68pF/50V/0402/NC
FOR TUNER (3.3V)
47pF/50V/0402
B
Near to Tuner
Near to mainchip
(330mA)
5V_SW
3
FB19 CLS UPB201212T-121Y-N 5A
VIN
VOUT
2
ADJ / GND
R182 249/1%/NC
1 C199 IFAGC_1
R183
IFAGC
IFAGC
3
10uF/16V/0805
+
B
+3.3V_TUNER
U13 AX1117AD33A
C200
+ C201
0.1uF/10V/0402
10K/0402 C204 C205 10uF/6.3V/NC
R184 0
C202
C203
10uF/10V/0805 0.1uF/10V/0402 ELNA SE100uF/16V/NC
47nF/16V/0402
Close to mainchip A
A
Title
COMPAL OPTOELECTRONICS CO., LTD SCHEMATIC,M/B VTV-L32616
Size
Document Number
Rev
1
XXXXXX Date: 5
4
3
2
Tuesday, November 27, 2012
Sheet 1
10
of
11
5
4
AMP_VCC
R217
R186 4.7K/0402 C206 22uF/16V/1206
C 3
BL_ERR
BL_ERR
+12V
Q14 DRC2114E/NC 10K
(12V PANEL) 10nF/25V/0402 10uF/10V/0805 (5V PANEL) POWER_EN 0/0402 AC Drop_DET1 BKLT_EN BL_DIMMING_C BL_ERR
B
R187
100pF/25V/0402 10K
POWER_EN E
2 POWER_EN
+5VSB
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
C227 C207
+5VSB
C208
1
CN2
C226,C227 for EMI solution
C226 10nF/25V/0402
100 3 AC Drop_DET
2
R72 0/0402/NC
D
LVDS_PWR
+12V U14 FB20 CLS UPB201209T-300Y-N 6A 5V_SW
1 2 3 4
panel_power
FB22 CLS UPB201209T-300Y-N 6A/NC
C209
C210
R188 47K/1%
10uF/16V/0805
S1 S2 S3 G
8 7 6 5
D4 D3 D2 D1
FB21 CLS UPB201209T-300Y-N 6A
TP19
Placement on TOP_Layer
R189 1K/1206
DMG4435SSS
JWT A2001WR2-16P C211
C212
1nF/25V/0402
1nF/25V/0402
POWER INTERFACE
1uF/50V/0805/NC C
R185 22K/0402/NC
D
3
R186 NC if change ACD DTC pin
3 LVDS_PWR_EN
For EMI
47K/1%/0402 B
R190
High => PANEL POWER ON Low => PANEL POWER OFF
R191
C213
C214
3.3K/1%/0402
Q15 LMBT3904LT1G E
DVDD3V3
10uF/10V/0805
100pF/25V/0402
R203 10K
Q16 2/17 Modify R197 100/1%/0402
3 BL_DIMMING
BL_DIMMING_C
CN3 JWT A2001WR2-11P 1 2 3 4 5 6 7 8 9 10 11
R195
R196
3V3SB OIRI
47/1%/0402
0/0402 R253 R228 R227
C215
C216
VD54 SESD0402P1BN-0450-090
100pF/25V/0402 VD53 C225 SESD0402P1BN-0450-090
1nF/25V/0402/NC C218
1nF/25V/0402 C217
High => Backlight Enable Low => Backlight Diable
VD52 SESD0402P1BN-0450-090 100pF/25V/0402 C221
Option :For SRF32T used, R142 from 100/1% change 1K/1%
VD51 SESD0402P1BN-0450-090
Option :For SRF32T used, mount C178,C223
R199 10K/1%/0402
1nF/25V/0402 C220
3 BL_ON/OFF
BKLT_EN
R200 R201 4.7K/1%/0402 4.7K/1%/0402
For EMI
VD50 SESD0402P1BN-0450-090
B
0/0402
3 3 3
100pF/25V/0402
Place closer to U1 R198
Power Key SAR0 SAR1
10/20 ESD protaction
For EMI
BL_ON/OFF
1K 10K 10K
2/17 Modify: Delete C240 ,C241
1nF/25V/0402 C219
C0402/NC
3
LED_G 3 LED_R 3 LIGHT_S_C 3 LIGHT_S_D 3
B
1nF/25V/0402
LMBT3904LT1G
C
R210 10K
1nF/25V/0402
R194 47K/1%/0402
R202 10K
FRONT PANEL CONNECTOR
C222
Low => POWER ON High => POWER OFF
4 3 2 1
C B
OPWRSB
E
3
SPK_OUTL+ SPK_OUTLSPK_OUTRSPK_OUTR+
POWER_EN R193 4.7K/1%/0402
3V3SB
C223
5 5 5 5
R192 4.7K/1%/0402
3V3SB
CN4 JWT A2001WR2-4P
2mm
C
Strapping mode :Must default Pull low.
3V3SB
SPK
+5VSB
For EMI
A
A
Title
COMPAL OPTOELECTRONICS CO., LTD SCHEMATIC,M/B VTV-L32616
Size
Document Number
Date:
Tuesday, December 11, 2012
Rev
1
XXXXXX 5
4
3
2
Sheet 1
11
of
11
SCHEMATIC DIAGRAM3 32:(5
5
4
3
2
1
R1
Power_Key
100F R0603
CN1
D
D
4
SAR0
3
Power_Key
2
2
SAR1
S1
VD1 PESD5V0S1BA SOD323
1 3
1
C3 104/50V C0805
2 4
1
POWER
JWT A2001WR2-4P HD-04-P2R
SWD-EVQPA
C
C
2
SAR0 R2 16KF R0603
S3 VOL-
VD2 PESD5V0S1BA SOD323
1
R5 18KF R0603
R4 6.04KF R0603 S4 2
1
C1 104/50V C0805
R6 NC R0603
2
1
Reserve only 3
4
3
4 VOL+ SWD-EVQPA
SWD-EVQPA
B
B
R7 16KF VD3 R0603 PESD5V0S1BA SOD323
R9 6.04KF R0603
R8 2KF R0603 S5
S6
R10 18KF R0603
C2 104/50V C0805
S7
1
2
1
2
1
2
3
4
3
4
3
4
達達達達達達達達達達
1
2
SAR1
DARFON
A
INPUT/OK/Hold for MENU CH-
CH+
CUSTOMER MODEL : SPD32T PWR MODU CUSTOMER PART NO : PK101V3350I DARFON Model Name : B167-201 PP
SWD-EVQPA SWD-EVQPA
SWD-EVQPA
2012/11/22 REV. Prepared by
5
4
3
D
Paul Wu 2
Reviewed by
Tony Ku
Approved by
Peter Wang 1
A
5
4
3
2
1
B+ B+ CCM1 NC CC-12DP7.5-R
RM1 604KF R0603
CY2 101 CY-12DP10
CY1 101 CY-12DP10
RM15 10KF R1206
CM4 474/50V C0805
11
CM7 224/50V C0805 CM6 101/50V C0805
CM9 221/1kV CC-P5+7.5
RM8 100F R1206
CM13 475/25V C0805
!
CY5 101 CY-12DP10
12VA CM16 NC C0805
2
12V1
ZDM4 CDZ55B6V2S D0805
5VS_OVP
ACD_NH
RM21 2.4KF R0805
RX3 820K R1206
UA2 LTV-817 DIP4
UA1
3
RA2 3.6MF R0603
2
!
6
RM28 100F R0805
CA2 104/50V C0805
GND
NC R0805
4
2
3
3
RM22 2.4KF R0805
2 RA12 NC R0805
CM17 NC C0805
CA4 102/50V C0805
CA3 822/50V C0805
3
CM11 474/50V C0805
DM11 BAW56 SOT23
24V
RM18 43KF R0805
3
RM26 NC R0805
RM36 100F R1206
2 RM29 1KF R0805
UM4 LTV-817 DIP4
CM15 102/50V C0805
C
2 RM31 1KF R1206
1
!
CA6 NC C0805
5
CD
IN1M101 SOT236
1
1
FPO
IN1
RA10
4
NDFPO
ACD_NL CA5 NC C0805
12V1
1
UM3 TO92-A AS431BZTR-E1
RM19 11.3KF R0805
RM27 NC R0805
12V_OVP ZDM3 CDZ55B9V1S D0805
ZDA1 CDZ55B6V2S D0805
1
RA6 300KF R0805
VCC
1
!
4
1 CM12 NC C0805
3
L2 NC L6DP3
QA3 NC SOT23 1
2
DM8 NC SOT23
3
RA1 5.1MF R0603
3
RM32 10KF R1206
1
RM20 3KF R1206
RA13 NC R1206
5VS
ZDM2 CDZ55B15S D0805
4 DIP4 1 LTV-817
RA11 NC R0805
!
BY4 Jumper BF15
BY3 Jumper BF22.5
AC DETECT CIRCUIT
CX1 334/275V CX-18X16-R
CY7 471 CY-12DP10
2 1
B+
F1 T4AH/250V FUSE5X20-HOLD
BR1
RS6 100F R1206
CCM5 NC CC-12DP7.5-R
RS32 82K/2W R1W
RS9 820K R0603
!
CCS2 222/1KV CC-12DP7.5-R
!
L RS10 820K R0603
N
TS1 900uH T-EE16-5
BS1 BEADCORE BF10
RS27 820K R0603
ZDS3 NC ZD7.5
1
DS1 PR1007G D12.5
2
RS13 820K R0603
RS25 10KF R0805
2 3
1 RS24 680F R0805
RS38 390F R1206
RS36 5.1KF R0805
RS39 390F R1206
RS40 NC R1206
RS41 NC R1206
4 ZDS4 NC ZD7.5
!
4
1
3
2 US4 LTV-817 DIP4 QS3 PMBT3904 SOT23
RS11 715KF R0805
CS13 105/50V C0805
RS37 5.1KF R0805
OCP
DRAIN
BR
DRAIN
GND FB
NC VCC
US1 A6069H DIP8
RS12 4.7M R0805
1
RS26 10KF R0805
1
DS4 CD4148WSN DS2 D0805 PR1007G D12.5
8 7
VDD
6
CS8 105/50V C0805
5 + CES1 22U/50V CE-6.3D-P2.5 ZDS1 1N5251B ZD7.5
24Vled 24Vled 24Vled
RS16 6.8KF R0805
VDD
1 RS14 NC R0805
RS35 1KF R0805
2
CS14 104/50V C0805
4
DS3 CD4148WSN D0805 CS9 102/50V C0805
3
RS30 3.6MF R0603
1
1
5VS_OVP RS15 2.4KF R0805
CS12 104/50V C0805
2
QS1 PMBT3904 SOT23
RS19 1KF R0805
CS15 105/50V C0805
1
2
CS11 NC C0805
24Vled 24Vled GND GND
2 US2 LTV-817 DIP4
ZDS11 1N5251B ZD7.5
RS20 2.4KF R0805
1
3
1 QS2 3 PMBS3906 SOT23
RS17 13KF R0805
!
FB
2
RS23 16KF R0805
Vsen FB
DS6 BAV70 SOT23
GNDA
P803 CON14 HD-14-P2R-2 RS21 1KF R0805
ZDS2 NC D0805
B
P802 CON16 HD-16-P2R
5VS
5V1
1 CS18 104/50V C0805
CS6 NC C0805
B
RS22 24KF R0805
2
RS7 NC R1206
7 6
PWR_ON
3
CES4 + CE-6.3X11A-P2.5 100U/25V
4
RS3 4.7F R1206
5
+ CES2 22U/50V CE-6.3D-P2.5
RS1 5.1/1W R1W
2
CS19 104/50V C0805
1
RS28 820K R0603
2
3
QS8 PMBT2907A SOT23 2 3
5VS
5VS
1
VCC_Main
VCC
2
QS4 PMBT2907A SOT23 2
LS1 1.1UH L7DP6
3
VCC
RDS1 1ohm/2W R1W
B
5V1
CES3 + CE-10X20A 1500U/16V
10 9
CCS3 68P/1KV CC-5DP5
CS3 102/50V C0805
DS5 SR540 D17.5
1
2
P801 AW 0721-6-PSF-1 AC-CCT2302
CS2 102/50V C0805
RS5 100F R1206
GND
CS10 105/50V C0805
GND GND BL_ERR
1
BLON
US3 AS431BZTR-E1 TO92-A
RS29 NC R0805
RS18 12.4KF R0805
NC DIM
GNDA 1
24V
2
12Va
3
GNDP
4
GNDP
5
GNDP
6
12Vcc
7
12Vcc
8
5Vcc
9
5Vcc
10 11 12
PWON
BL_ERR BLON
13 14
12Va
ACD BLON DIM
DIM
BL_ERR
1 2 3
12VA
4 5 R505 0 R1206
6 7
PWR_ON
2
!
8
12VCC
ZD503 NC D0805
9 10
5VS
1
4 3
CM10 NC C0805
VCC
2
RA9 5.1KF R0805
VZ1 NC VZ10D
3
+
CEM10 100U/25V CE-6.3D-P2.5
LM3 1.1UH L7DP6
VDD
TR1 1OHM/5A TR10DP5-R
CA1 102/50V C0805 RY1 R1W NC
CEM6 100U/25V CE-6.3D-P2.5
1
! BY6 JUMP BF10
+
2
RX2 820K R1206
!
RM17 NC R1206
UM2
t
!
RX1 820K R1206
CM14 NC C0805
CFM1 473/630V CM-9X23.5
5VS
VCC
B
4
RM16 NC R1206
12V1
C
2
+ CEM3 1500U/16V CE-10X20A
10 TM1 EEM-3434 T-EEM3434
RM23 470F R1206
!
LF2 JUMP L12X12
CEM9 100U/50V CE-8D-P3.5
12VCC
RM7 680F R0805
CY4 NC CY-12DP10
CY3 NC CY-12DP10
3
+
DM5 SR540 D17.5
4
QM2 3 P1825ATF TO220RB
!
1
RM37 NC R1206
LM1 1.1UH L7DP6
12V1
9
CCM3 NC CC-5DP5
!
!
L1 NC L6DP3
!
1
9
8
RV
Reg
COM
VGL
10
12 NC
13 NC OC
Css
6
15
14 VB
VS
VGH
GND
FB CM3 333/50V C0805
RM35 NC R1206
1
4
CM2 105/50V C0805
RM24 NC R1206
2
3
2
CM1 104/50V C0805
DM4 SR540 D17.5
2
1
CM5 102/50V C0805 RM6 4.7KF R0805
RM25 NC R1206
6
3
LF1 16mH L23X25
5
16
NC
NC
17
2
RM5 95.3KF R0805
RM33 NC R1206
11
2
RM14 91F R1206
RM34 NC R1206
CCM4 10P/3KV CC-P5+7.5
12V_OVP
CEM1 NC + CE-5D-P2.5
!
DM7 SR5100 D20
2
CCM2 10P/3KV CC-P5+7.5
+ CEM7 470U/35V CE-10X20
3
DM3 CD4148WSN D0805
DM1 UF1007 D12.5
24V D
8
QM1 P1825ATF TO220RB
1 RM12 10KF R1206
RM13 10F R1206
!
2
!
ZDM1 CDZ55B15S RM9 D0805 10F R1206
Vsen
VCC_Main BY5 BEADCORE BF10
4
RM30 1MF R0603
3
1
Vsen
RM4 1MF R0603
+ CEP1 330uF/220V CE-16X51-RO
TVS1 NC D17.5
BR1
UM1 SSC9522S SO18-360
B
!
2
BD1 KBJ408G DB-3SR
1
!
18
RM39 604KF R0603
1
Vcc
B+ 4
2
3
2
CM8 224/50V C0805
RM38 604KF R0603
LM2 1.1UH L7DP6
24V1
7
2
RM11 91F R1206
1
RM3 604KF R0603
RC
EMI CIRCUIT
7
D
DM6 SR5100 D20
!
DM2 CD4148WSN D0805
2
RM10 10F R1206
RM2 604KF R0603
11 R504 22 R1206
12 13
ACD_NH
14
BLON DIM
15
R503 NC R1206
ACD_NL
16
3 RS31 3.6MF R0603
BL_ERR ZDS5 CDZ55B27S D0805 2 1
A
CS16 101/50V C0805
RS33 5.6MF R0805
3 1 RS34 715KF R0805
QS9 RK7002 SOT23
BY2 Jumper BF10
2
BY1 Jumper BF10
A
CY6 471 CY-12DP10
NC = No Component 2.2mm eyelet 1.6mm eyelet
補補
DARFON
PCB: FR1-CTI600 Basic: 3.5mm, Reinforced: 7.5mm 5
2012/11/19 Prepared by 4
3
2
REV.
D
Paul Wu 1
達達達達達達達達達達 CUSTOMER MODEL : SPD32T PWR MODU CUSTOMER PART NO : PK101V3350I DARFON Model Name : B167-201 PP Reviewed by
Tony Ku
Approved by
Peter Wang
5
!
2
VCC
VB
14
Reg
VS
1
Vsen
36
Vsen
VGL
C106
8LR00530 330uF,25V
T101:2
4148
10
10
SR560
T101:11 D301
R127
D105
T101:10
D302
SR560
C101
7
330R138
S4
LTV817
PC502:2
330 R227
5Vcc
LTV817
16B
PC103:1 5.1K
R135
T501:2
4148
R105 1.2M
!
R106
LTV817
24B
1
D505
102
C217
3
ZD505
C
ACD
6.2B ZD201
!
Q201
R233 N.C.
N.C.
+
22uF/50V
3
R528
C512
PC502:1
R232
J203 T501:1 4
LTV817
5.1K
0
1.5
21
4
Vcc
1 2 3 4 5 6 7 8 9 10 11 12 13 14
R229
N.C.
R201 BEAD 1N4937
FB502 D504 R524
Q502
P803 24Vled
16K
!
N.C. KSP2222A
24K
R225
4401
104P
1
A
104
C214
PWON ACD BLON DIM BL_ERR
PWON
S2
G
R223 Q205 C216
8.2K
R228
1K
2
U202
224
1.8K BT169D R222
27K
AS431
5Vcc
R220
4403
330 R226
R
102
4
5.1K
R224C213
330 15B
C212
6.2B
16B
103
IPK
C515
ZD504
2
R146
GND
102
!
6
12Vcc
2K
Q204
K
Drain
8.66K
R217
1500uF,10V
PC501:2
FB
C202
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
12Va
+
100uF,25V
1.74K
R218
R207 ZD202 SCR201
R215 +
7
3
Vsen
R204
A
T501:10
102
C201
47.5K
D108
C131
R145
T501:7 T501:8
102
330
C513 ZD503 R522
4
3
1
C
R216 100
GND
L201 5Vcc
R214 100 C210 C211
U501 PC501:1
Q103
8
8LR00530
D201
FSB127H
LTV817
ZD104
Drain
P802
SR560
T501:9
100
VDD
1.1K
R212
C208
R
2
36B
104
2
R210
U201
+
R118
B
224
AS431
C516
C514
ZD502
D506
C511
4.7uF/50V
4148
B+
N.C.
Drain
HV
4148
5.1K
R206
C123
300R139
470
474
474
C122 100 C118
C121
9.1C
102
C120
ZD101
5
+
T501:5 T501:4
110K
R203
S1
C203
R501 R502 110K
9.1K
18.7K
C207 2
4.7uF/50V
T501:6
110K
R503 R504
12Vcc
C303
104
D203
!
BEAD
D501
R121
+
!
LTV817
PC101:2
STO2D-170 110K
1
100uF,25V
5.1K
3.0K
4 3
4148
D202
12
3
L302
910
R205
T101:9
R202
47K
FB501
R119
+
GND
C102
!
LTV817
R120
+
100
680
R130
R131
PC101:1
R117
330uF,25V
363
680
R129
B
C304
JUMP
!
36K
9
RC
OC
PGND
6
334
SGND FB
472
82K
4
RV
3
C130
C116
C117
C115
C124
104 104
R128
105
CSS
12Va
100uF,25V
+
J202
Q102
R126 5
L301
FQPF9N25C
R125
10
11
8LR00530
1
0
U101
N.C.
T101:4
C
R116
0
J201 T101:7 !
C113
15
C402
T101:8
104
8
2.7K
R124
36
R123
ZD102
R401
!
36K
SSC9522
R115
C401
Q101
R122
16
A
+
S2
18 VGH
16B
1.2M
D107
D106
N.C.
R114
1N4007
1N4007
+
R301
12
LF101:2
SCK015
!
D402
FQPF9N25C
D104 10
1.2M
Vcc
!
4148
R113
N.C.
C104
220uF,35V 220uF,35V
SR3100
SR3100
1.2M
8
24Vled
10
R112
34
D401
T101:6 UF4007
D101 R132
1.2M
N.C.
!
1.2M
BD101
17
471
!
TH101
R110 R111
N.C.
N.C.
!
C601
13
N.C.
471
KBJ406G
1
!
CY102 CY101
334 !
R104 R103
!
R101
VA101
!
CX101
TVR10681
!
+
!
!
C
8TC00653
LF101:1
N.C.
N.C.
!
N.C.
R102
221
P801:1
!
!
N.C.
21
P801:3
N
F101
4A H/250V
221
A
CY106 CY105
P801 L
330uF,220V
!
VS101
!
7
TFDPOEBSZ
QSJNBSZ
DSPL-501N
SA101
6
S1
4
C302
3
A
2
C301
1
ZD103 PC103:2
1.2M
2
R107 1.2M
R108 1.2M
3
R109 1.2M
104
D
2
223
C126
R137
6
68K
Vcc NDFPO
4
0
FB101
IN1M102
C125
U102 Vss
IN1
FPO
CD
1 !
471
!
CY103
152
CY104
R
104
102
FSP GROUP
C128
C127
E-LED
D-LED
1.7A
1.7A
12Vcc 1.0A 12Va 0.8A 24Vled 1.31A
1.0A 1.6A 1.55A
5Vcc
H=23.0mm USA 32" 120V WO/PFC 1
2
3
٤ዧٞᄐैٝૻڶֆ
5
4
5
6
7
D
FSP Technology Inc.
TITLE: FSP079-4F01 P/N:
3BS0334712GP
size: A2
APPROVED:
CHECKED:
Gerry
Joey
rev: 2.4
DESIGNER:
Feimin
Sheet 1 of 2 PCB File: FSP079-4F01-R2 Date: 2012/12/4 File: E:\AD6\70W\FSP079-4F01-R2-1(Panasonic-A70-32)\FSP079-4F01-WITH VALUE\FSP079-4F0 ᒵሁቹ ।ᒳᇆ:7000P-0106 8
1
2
A
3
4
CN1
R1 Power Key
100 LSBLC05C
VD1
Power Key SAR0 SAR1
100nF
C3
S1 1
2
3
4
A
1 2 3 4
GND
POWER
(1.006V)
B
(1.513V)
B SAR0
16KF LSBLC05C
VD2 R2
S3
6.04KF
18KF
100nF
N.C.
R4
R5
C1
R6
1
2
1
2
3
4
3
4
VOL+
VOL(0.498V)
C
VD3
R7
(1.513V)
(1.006V)
16KF LSBLC05C
S4
S5
2KF
6.04KF
18KF
100nF
R8
R9
R10
C2
S6
S7
1
2
1
2
1
2
3
4
3
4
3
4
CH-
CH+
C
SAR1
R
٤ዧٞᄐैٝૻڶֆ
FSP GROUP
INPUT/OK/ Hold for MENU
TITLE: P/N:
D
FSP Technology Inc.
FSP079-4F01 3BS0334712GP
APPROVED:
CHECKED:
Gerry
Joey
size: A4
rev: 2.4
DESIGNER:
Feimin
D
Sheet 2 of 2 PCB File: FSP079-4F01-R2 Date: 2012/12/4 File: E:\AD6\70W\FSP079-4F01-R2-1(Panasonic-A70-32)\FSP079-4F01-WITH VALUE\FSP079-4 ᒵሁቹ ।ᒳᇆ:7000P-0106 1
2
3
4
APPENDIX-A: Main assembly SPE32 (TC-L32XM6) Version:02 Part Number REF. No
Description
Chassis no: SPE32T Product no SPE32TMA010
Q’ty Product no SPE32TMA101 SKD-ADI
1
PCBA IR/B
454C4070L01
454C4070L01
1
2
FIRMWARE M/B
461C6270L31
461C6270L31
1
3
LCD MODU
AC6VM3205R1
NA
1
4
SPK SET(90d)(PIN90d)
CG100513G0I
CG100513G0I
2
5
H-CON SET
DC02A00130I
DC02A00130I
1
6
H-CON SET
DC02L00700I
DC02L00700I
1
7
H-CON SET
DC02P02010I
DC02P02010I
1
8
H-CON SET
DC02P02030I
DC02P02030I
1
9
H-CON SET
DC02V04140I
DC02V04140I
1
10 MYLAR AL TAPE
LCTC324010I
LCTC324010I
2
11 PWR MODU(SPD32T)
PK101V3340I or PK101V3350I
PK101V3340I or PK101V3350I
1
12 CABINET ASSY
APPE32T010I
APPE32T010I
1
13 BACK COVER ASSY
APPE32T020I
APPE32T020I
1
14 KEY BUTTON BRAKT (32
FBPE32T010I
FBPE32T010I
1
15 LCD MTG SIDE(32B6)
ECPD32T050I
ECPD32T050I
1
16 METAL BRACKET BOTTOM
ECPE32T030I
ECPE32T030I
1
17 LCD MTG SIDE(32XM6)
ECPE32T040I
ECPE32T040I
2
18 GROUND_SPRING (32XM6
EEPE32T010I
EEPE32T010I
2
Remarks
19 BARRIER P-PCB LCD
ELPE32T010I
ELPE32T010I
1
20 SIDE AV BRACKET(32B6
FAPD32T050I
FAPD32T050I
1
21 SPEAKER BRACKET(32XM
FAPE32T050I
FAPE32T050I
4
22 CH MOUNT BOSS(32XM6)
FAPE32T060I
FAPE32T060I
2
23 LOCKING CABLE TIE
KA000600ZZI
KA000600ZZI
1
24 SUPPORT(32XM6)
LCPE32T020I
LCPE32T020I
1
25 SCREW+LOCK WASHER(8)
MAA8002040I
MAA8002040I
6
26 SCREW
MAAI30004ZI
MAAI30004ZI
8
27 SCREW
MAAT40001ZI
MAAT40001ZI
4
28 TAPPING SCREW
MAB300001ZI
MAB300001ZI
8
29 TAPPING SCREW
MABT40140ZI
MABT40140ZI
8
30 RATING NP-TC-L32XM6
EJ4PE32000I
EJ4PE32000I
1
31 CARTON-TC-L32XM6
HB4PE32011I
NA
1
32 MANUAL KITS-32XM6
PK28PE3201I
PK28PE3201I
33 ENERGY GUIDE-TC-L32XM6 HGPE320000I
HGPE320000I
1
34 ZIPPERED BAG
HK3OL77801I
HK3OL77801I
1
35 PE BAG FOR TV
HK3PD32001I
HK3PD32001I
1
36 SCRW-SEMS-W
MAA7000130I
MAA7000130I
4
Type B screw
37 SCREW
MAAF50001ZI
MAAF50001ZI
4
Type A screw
38 PWR CORD(S)
GA05009160I
GA05009160I
1
39 REMO CTRL AA
PK11V01870I
PK11V01870I
1
40 PEDESTAL ASSY (32XM6)
APPE32T041I
APPE32T041I
1
Change from PK28PE3200I to 1
PK28PE3201I
Change from GA05009080I to GA05009160I
Change from APPE32T040I to APPE32T041I
41 STAND METAL (32XM6)
ECPE32T020I
ECPE32T020I
1
42 EPS TR (32XM6)
FJPE32T050I
NA
1
43 EPS TL (32XM6)
FJPE32T060I
NA
1
44 EPS BR (32XM6)
FJPE32T070I
NA
1
45 EPS BL (32XM6)
FJPE32T080I
NA
1
APPENDIX-A: Main assembly SPE32 (TC-L32XM6X) Version:02 Part Number REF. No
Description
Chassis no: SPE32T Product no SPE32TMX010
Q’ty Product no SPE32TMX101 SKD-PANAMEX/PAVCA
1
PCBA IR/B
454C4070L01
454C4070L01
1
2
FIRMWARE M/B
461C6270L32
461C6270L32
1
3
LCD MODU
AC6VM3205R1
NA
1
4
SPK SET(90d)(PIN90d)
CG100513G0I
CG100513G0I
2
5
H-CON SET
DC02A00130I
DC02A00130I
1
6
H-CON SET
DC02L00700I
DC02L00700I
1
7
H-CON SET
DC02P02010I
DC02P02010I
1
8
H-CON SET
DC02P02030I
DC02P02030I
1
9
H-CON SET
DC02V04140I
DC02V04140I
1
10 MYLAR AL TAPE
LCTC324010I
LCTC324010I
2
11 PWR MODU(SPD32T)
PK101V3340I or PK101V3350I
PK101V3340I or PK101V3350I
1
12 CABINET ASSY
APPE32T010I
APPE32T011I
1
13 BACK COVER ASSY
APPE32T020I
APPE32T021I
1
14 KEY BUTTON BRAKT (32
FBPE32T010I
FBPE32T010I
1
15 LCD MTG SIDE(32B6)
ECPD32T050I
ECPD32T050I
1
16 METAL BRACKET BOTTOM
ECPE32T030I
ECPE32T030I
1
17 LCD MTG SIDE(32XM6)
ECPE32T040I
ECPE32T040I
2
18 GROUND_SPRING (32XM6
EEPE32T010I
EEPE32T010I
2
Remarks
19 BARRIER P-PCB LCD
ELPE32T010I
ELPE32T010I
1
20 SIDE AV BRACKET(32B6
FAPD32T050I
FAPD32T050I
1
21 SPEAKER BRACKET(32XM
FAPE32T050I
FAPE32T050I
4
22 CH MOUNT BOSS(32XM6)
FAPE32T060I
FAPE32T060I
2
23 LOCKING CABLE TIE
KA000600ZZI
KA000600ZZI
1
24 SUPPORT(32XM6)
LCPE32T020I
LCPE32T020I
1
25 SCREW+LOCK WASHER(8)
MAA8002040I
MAA8002040I
6
26 SCREW
MAAI30004ZI
MAAI30004ZI
8
27 SCREW
MAAT40001ZI
MAAT40001ZI
4
28 TAPPING SCREW
MAB300001ZI
MAB300001ZI
8
29 TAPPING SCREW
MABT40140ZI
MABT40140ZI
8
30 RATING NP-TC-L32B6X
EJ4PD32050I
EJ4PD32050I
1
31 CARTON-TC-L32XM6X
HB4PE32021I
NA
1 Change from PK28PE3210I to
32 MANUAL KITS-32XM/39EM6X PK28PE3211I
PK28PE3211I
33 NA
NA
NA
34 ZIPPERED BAG
HK3OL77801I
HK3OL77801I
1
35 PE BAG FOR TV
HK3PD32001I
HK3PD32001I
1
36 SCRW-SEMS-W
MAA7000130I
MAA7000130I
4
Type B screw
37 SCREW
MAAF50001ZI
MAAF50001ZI
4
Type A screw
38 PWR CORD(S)
GA18000030I
GA18000030I
1
39 REMO CTRL AA
PK11V01870I
PK11V01870I
1
40 PEDESTAL ASSY (32XM6)
APPE32T041I
APPE32T041I
1
1
PK28PE3211I
NA
Change from GA18000020I to GA18000030I
Change from APPE32T040I to APPE32T041I
41 STAND METAL (32XM6)
ECPE32T020I
ECPE32T020I
1
42 EPS TR (32XM6)
FJPE32T050I
NA
1
43 EPS TL (32XM6)
FJPE32T060I
NA
1
44 EPS BR (32XM6)
FJPE32T070I
NA
1
45 EPS BL (32XM6)
FJPE32T080I
NA
1
APPENDIX-A: Main assembly SPE32 (TC-L32XM6P) Version:02 Part Number REF. No
Description
Chassis no: SPE32T Product no SPE32TMP010
Q’ty Product no SPE32TMP101 SKD-ADI
1
PCBA IR/B
454C4070L01
454C4070L01
1
2
FIRMWARE M/B
461C6270L32
461C6270L32
1
3
LCD MODU
AC6VM3205R1
NA
1
4
SPK SET(90d)(PIN90d)
CG100513G0I
CG100513G0I
2
5
H-CON SET
DC02A00130I
DC02A00130I
1
6
H-CON SET
DC02L00700I
DC02L00700I
1
7
H-CON SET
DC02P02010I
DC02P02010I
1
8
H-CON SET
DC02P02030I
DC02P02030I
1
9
H-CON SET
DC02V04140I
DC02V04140I
1
10 MYLAR AL TAPE
LCTC324010I
LCTC324010I
2
11 PWR MODU(SPD32T)
PK101V3340I or PK101V3350I
PK101V3340I or PK101V3350I
1
12 CABINET ASSY
APPE32T010I
APPE32T010I
1
13 BACK COVER ASSY
APPE32T020I
APPE32T020I
1
14 KEY BUTTON BRAKT (32)
FBPE32T010I
FBPE32T010I
1
15 LCD MTG SIDE(32B6)
ECPD32T050I
ECPD32T050I
1
16 METAL BRACKET BOTTOM
ECPE32T030I
ECPE32T030I
1
17 LCD MTG SIDE(32XM6)
ECPE32T040I
ECPE32T040I
2
18 GROUND_SPRING (32XM6
EEPE32T010I
EEPE32T010I
2
Remarks
19 BARRIER P-PCB LCD
ELPE32T010I
ELPE32T010I
1
20 SIDE AV BRACKET(32B6
FAPD32T050I
FAPD32T050I
1
21 SPEAKER BRACKET(32XM
FAPE32T050I
FAPE32T050I
4
22 CH MOUNT BOSS(32XM6)
FAPE32T060I
FAPE32T060I
2
23 LOCKING CABLE TIE
KA000600ZZI
KA000600ZZI
1
24 SUPPORT(32XM6)
LCPE32T020I
LCPE32T020I
1
25 SCREW+LOCK WASHER(8)
MAA8002040I
MAA8002040I
6
26 SCREW
MAAI30004ZI
MAAI30004ZI
8
27 SCREW
MAAT40001ZI
MAAT40001ZI
4
28 TAPPING SCREW
MAB300001ZI
MAB300001ZI
8
29 TAPPING SCREW
MABT40140ZI
MABT40140ZI
8
30 RATING-TC-L32XM6P
EJ4PE32040I
EJ4PE32040I
1
31 CARTON-TC-L32XM6P
HB4PE32031I
NA
1
32 MANUAL KITS-32XM/39E
PK28PE3221I
PK28PE3221I
1
33 NA
NA
NA
34 ZIPPERED BAG
HK3OL77801I
HK3OL77801I
1
35 PE BAG FOR TV
HK3PD32001I
HK3PD32001I
1
36 SCRW-SEMS-W
MAA7000130I
MAA7000130I
4
Type B screw
37 SCREW
MAAF50001ZI
MAAF50001ZI
4
Type A screw
38 PWR CORD(S)
GA18000030I
GA18000030I
1
39 REMO CTRL AA
PK11V01870I
PK11V01870I
1
40 PEDESTAL ASSY (32XM6
APPE32T041I
APPE32T041I
1
Change from PK28PE3220I to PK28PE3221I
NA
Change from GA18000020I to GA18000030I
Change from APPE32T040I to APPE32T041I
41 STAND METAL (32XM6)
ECPE32T020I
ECPE32T020I
1
42 EPS TR (32XM6)
FJPE32T050I
NA
1
43 EPS TL (32XM6)
FJPE32T060I
NA
1
44 EPS BR (32XM6)
FJPE32T070I
NA
1
45 EPS BL (32XM6)
FJPE32T080I
NA
1
APPENDIX-B: SPE32 Exploded View 12 3
17
21
28
4
22
6
22
20
25
13 15
7
10
2
18
23 1
18
26
8
9
5
17 21
10
19 28
4
24
28
11 25 14
16
27
29
26
29
34 38
Type A
36 Type B
40
37
30
43
39
42
41
POP label 32
35
31
45 33
44
11 Disassembly and Assembly Instructions 11.1. PEDESTAL 1. Lay down the unit so that the rear cover faces upward. 2. Remove the 4 screws. 3. Remove the Pedestal_assy
11.2. Back cover 1. Remove the 20 screws. 2. Remove the Back cover.
11.3. P-Board 1. Remove the 4 screws. 2. Disconnect the connectors (P1, P2, P3) 3. Remove the P-Board.
11.4. M-Board 1. Remove the 2 screws. 2. Disconnect the connectors (M1,M2, M3,M4). 3. Remove the M-Board.
11.5. Speaker unit 1. Remove the 4 screws. 2. Remove the speaker units.
11.6. IR-Board 1. Disconnect the connectors (I1). 2. Remove the IR-Board.
11.7. Metal parts 1. Remove the 4 screws. 2. Remove the metal parts (M1,M2, M3,M4).
11.8. LED Panel 1. Remove the LED panel.
Cabinet
LED panel
PE32T SERVICE MANUAL CHANGE LIST DATE
Page
VERSION
CHANGE ITEM
10 / Jan. 2013
49-54
01
Update the APPENDIX Screw type
27 / Feb. 2013
49-57
02
Update the APPENDIX parts list