SELECTED REFERENCES FOR ADDITIONAL STUDY

SELECTED REFERENCES FOR ADDITIONAL STUDY HANDBOOKS AND GENERAL REFERENCES ASM Metals Reference Book. 3rd Ed., ASM, Materials Park, OH (1993). ASM Engi...
Author: Bonnie Townsend
0 downloads 0 Views 122KB Size
SELECTED REFERENCES FOR ADDITIONAL STUDY HANDBOOKS AND GENERAL REFERENCES ASM Metals Reference Book. 3rd Ed., ASM, Materials Park, OH (1993). ASM Engineered Materials Reference Book, 2nd Ed., ASM, Materials Park, OH (1993). Tool and Manufacturing Engineers Handbook, 4th Ed., Society of Manufacturing Engineers, Dearborn, MI. Vol. 1, Machining (1983) Vol. 2, Forming (1984) Vol. 3, Materials, Finishing and Coating (1985) Vol. 4, Quality Control and Assembly (1987) Vol. 5, Manufacturing Management (1987) Vol. 6, Design for Manufacturability (1992) Vol. 7, Continuous Improvement (1994) Vol. 8, Plastic Part Manufacturing (1996) Vol. 9, Material and Part Handling in Manufacturing (1997) ASME Handbook, McGraw-Hill, New York. Vol. 1, Metals Engineering: Design Vol. 2, Metals Properties Vol. 3, Engineering Tables Vol. 4, Metals Engineering: Processes ASM Engineered Materials Handbook Series, ASM, Materials Park, OH. Vol. 1, Composites (1987) Vol. 2, Engineering Plastics (1988) Vol. 3, Adhesives and Sealants (1990) Vol. 4, Ceramics and Glasses (1991) ASM Engineered Materials Handbook, Desk Ed., ASM, Materials Park, OH (1995). ASTM Standards (multiple volumes, published annually), ASTM, Philadelphia, PA. Manufacturing Engineering Handbook, Hinauyu Geng, McGrawHill (2004). Manufacturing Processes Reference Guide, R.H.Todd, D. K.Allen, and F. Alting, Industrial Press (1994). Materials Handbook, 13th Ed., George S. Brady and Henry R. Clauser, McGraw-Hill (1995). Metals Handbook, Desk Ed., 2nd Ed., ASM, Materials Park, OH (1998). Tool and Manufacturing Engineers Handbook – Desk Edition, Society of Manufacturing Engineers, Dearborn, MI (1988). Machinery’s Handbook, 27th Ed., Industrial Press (2004). Metals Handbook, 9th Ed., ASM, Materials Park, OH. Vol. 1, Properties amid Selection: Irons and Steels (1978)

Vol. 2, Properties and Selection: Nonferrous Alloys and Pure Metals (1979) Vol. 3, Properties and Selection: Tool Materials and Special-Purpose Metals (1980) Vol. 4, Heat Treating (1981) Vol. 5, Surface Cleaning, Finishing, and Coating (1982) Vol. 6, Welding, Brazing and Soldering (1983) Vol. 7, Powder Metallurgy (1984) Vol. 8, Mechanical Testing (1985) Vol. 9, Metallography and Microstructures (1985) Vol. 10, Materials Characterization (1986) Vol. 11, Failure Analysis and Prevention (1986) Vol. 12, Fractography (1987) Vol. 13, Corrosion (1987) Vol. 14, Forming and Forging (1988) Vol. 15, Casting (1988) Vol. 16, Machining (1989) Vol. 17, Nondestructive Evaluation & Quality Control (1989) Metals Handbook, 10th Ed., ASM, Materials Park, OH. Vol. 1, Properties and Selection: Irons, Steels and High-Performance Alloys (1990) Vol. 2, Properties and Selection: Nonferrous Alloys and Special-Purpose Materials (1990) Vol. 3, Alloy Phase Diagrams (1992) Vol. 4, Heat Treating (1991) Vol. 5, Surface Engineering (1994) Vol. 6, Welding, Brazing and Soldering (1993) Vol. 7, Powder Metal Technologies and Applications (1998) Vol. 8, Mechanical Testing and Evaluation (2000) Vol. 9, Metallography and Microstructures (2004) Vol. 10, Materials Characterization (1986) Vol. 11, Failure Analysis and Prevention (2002) Vol. 12, Fractography (1987) Vol. 13A, Corrosion: Fundamentals, Testing, and Protection (2003) Vol. 13B, Corrosion: Materials (2005) Vol. 13C, Corrosion: Environments and Industries (2006) Vol. 14A, Metalworking: Bulk Forming (2005) Vol. 14B, Metalworking: Sheet Forming (2006) Vol. 15, Casting (1988) Vol. 16, Machining (1989) Vol. 17, Nondestructive Evaluation and Quality Control (1989) Vol. 18, Friction, Lubrication and Wear Technology (1992) Vol. 19, Fatigue & Fracture (1996) Vol. 20, Materials Selection and Design (1997) Vol. 21, Composites (2001)

S1

S2

Selected References for Additional Study

MMPDS-02: Metallic Materials properties Development and Standardization, Battelle Memorial Institute (2005) [NOTE:This is the successor to MIL-HDBK-5]. Vol. 1: Introduction and Guidelines Vol. 2: Steel and Magnesium Alloys Vol. 3: 2000-6000 Series Aluminum Alloys Vol. 4: 7000 Series and Cast Aluminum Alloys Vol. 5 Miscellaneous Alloys & Structural Joints

The Science and Engineering of Materials, 5th Ed., P.P. Puhle and D. R. Askeland, Thomson, Ontario, Canada (2006).

Production Handbook, 4th Ed., John A. White (ed.),Wiley (1987).

ASM Specialty Handbook - Cast Irons, ASM (1996).

SAE Handbook, Part I—Materials (issued annually). Society of Automotive Engineers, Warrendale, PA.

ASM Specialty Handbook - Stainless Steels, ASM (1994).

Smithells Metals Reference Book, 8th Ed., W.F. Gale and T.C. Totemcier, Butterworths (2004). Troubleshooting Manufacturing Processes, 4th Ed., SME (1988). Woldman’s Engineering Alloys, 9th Ed., J. Frick, ASM, Materials Park, OH (2000).

BASIC AND GENERAL TEXTBOOKS IN MATERIALS AND PROCESSES

The Science and Design of Engineering Materials, 2nd Ed., J. P. Schaffer et al., McGraw-Hill (1999).

FERROUS METALS ASM Specialty Handbook - Carbon and Alloy Steels, ASM (1996).

Cast Iron: Physical and Engineering Properties, H.T. Angus, Butterworths (1976). Design Guidelines for the Selection and Use of Stainless Steel, Designers Handbook Series, Specialty Steel Industry of the United States, Washington, DC (1992). Engineering Properties of Steel, ASM, Materials Park, OH (1982). Handbook of Stainless Steels, Donald Peckner and I. M. Bernstein (eds.), McGraw-Hill (1977). Introduction to Stainless Steels, 3rd Ed., ASM (1999).

21st Century Manufacturing, Paul Kenneth Wright, Prentice Hall (2001).

Metallurgy and Heat Treatment of Tool Steels, Robert Wilson, McGraw-Hill (1975).

Engineering Materials, 8th Ed., Kenneth Budinski and Michael Budinski, Prentice Hall (2005).

Modern Steels and Their Properties, (various editions) Bethlehem Steel Corporation, Bethlehem, PA.

Fundamentals of Modern Manufacturing, 3rd Ed. Mikell P. Groover, Wiley (2007).

Properties and Selection of Tool Materials, ASM, Materials Park, OH (1975).

Introduction to Materials Science for Engineers, 6th. Ed., James F. Shackelford, Prentice-Hall (2005).

Stainless Steel, R.A. Lula, ASM, Metals Park, OH (1985).

Introduction of Manufacturing Processes, 3rd Ed., John A. Schey, McGraw-Hill (2000). Introduction to Manufacturing Processes and Materials, Robert C. Creese,Marcel Dekker (1999). Manufacturing Engineering and Technology, 5th Ed., Serope Kalpakjian and Steven R. Schmid, Prentice-Hall (2006). Manufacturing Processes and Systems, 9th Ed., Phillip F. Ostwald and Jairo Muñoz, Wiley (1997). Manufacturing Processes and Equipment, Jiri Tlusty, Prentice Hall, Upper Saddle River, NJ (1999). Manufacturing Processes and Systems, 9th Ed., Phillip F. Ostwald and Jairo Muñoz, Wiley (1997). Manufacturing Processes and Materials, 4th Ed., George F. Schrader and Ahmad K. Elshennawy, Society of Manufacturing Engineers (2000).

Steel Selection: A Guide for Improving Performance and Profits, R. F. Kern and M. E. Suess, Wiley-Interscience (1979). Steels: Metallurgy & Applications, D.T. Llewellyn, Butterworth Heinemann (1992). Steels: Heat Treatment and Processing Principles, G. Krauss, ASM, Materials Park, OH (1990). The Making, Shaping and Treating of Steel, 11th Ed., Association for Iron and Steel Technology (1998). Tool Steels, 5th Ed., G.A. Roberts, G. Krauss and R. Kennedy,ASM, Materials Park, OH (1998). Worldwide Guide to Equivalent Irons and Steels, 5th Ed., ASM, Materials Park, OH (2006). Steels: Processing, Structure, and Performance, George Krauss, ASM, Materials Park, OH (2005).

NONFERROUS METALS

Materials Science and Engineering Materials: An Introduction, 6th Ed. W.D. Callister, Wiley (2003).

Aluminum Alloys: Structure and Properties, V. F. Mondolfo, Butterworths (1975).

Mechanical Metallurgy, 3rd Ed.,G. E.Dieter, McGraw-Hill, New York (1986). Principles of Materials Science and Engineering, 4th Ed., W. F. Smith, McGraw-Hill (1996).

Aluminum, ASM, Materials Park, OH (1967). Vol. 1, Properties, Physical Metallurgy and Phase Diagrams Vol. 2, Design and Application Vol. 3, Fabrication and Finishing

Processes and Design for Manufacturing, 2nd Ed., Sherif D. El Wakil, PWS Publishing Company (1998).

Aluminum Standards and Data,The Aluminum Association,Washington, DC (bi-annual updates).

Processes and Materials of Manufacture, 4th Ed., Roy A. Lindberg, Allyn and Bacon (1990).

Aluminum: Properties and Physical Metallurgy, John E. Hatch (ed.),ASM, Materials Park, OH (1984).

Structures and Properties of Engineering Alloys, 2nd Ed.,W. F. Smith,McGraw-Hill New York (1993).

ASM Specialty Handbook - Aluminum and Aluminum Alloys, ASM (1993).

Selected References for Additional Study ASM Specialty Handbook - Copper and Copper Alloys,ASM (2001). ASM Specialty Handbook - Magnesium and Magnesium Alloys, ASM (1999). ASM Specialty Handbook - Nickel, Cobalt, and Their Alloys,ASM (2000). Engineering Properties of Zinc Alloys, International Lead Zinc Research Organization, New York (1980). Introduction to Aluminum Alloys and Tempers, J.G. Kaufman,ASM (2000). Materials Properties Handbook :Titanium Alloys, R. Boyer, E.W. Collings, and G. Welsch, ASM, Materials Park, OH (1994). Properties of Aluminum Alloys :Tensile, Creep and Fatigue Data at High and Low Temperatures, J.G. Kaufman (ed.),ASM and Aluminum Association (1999). Standards Handbook: Copper, Brass, and Bronze (7 volumes) Copper Development Association. Superalloys: A Technical Guide, 2nd Ed., ASM (2002). Titanium: A Technical Guide, 2nd Ed., M. Donachie (ed.),ASM, Materials Park, OH (2000). Titanium Alloys Handbook, Metals and Ceramics Information Center, Battelle Columbus Laboratories, Columbus, OH (1972). Worldwide Guide to Equivalent Nonferrous Metals and Alloys, 4th Ed., ASM, Materials Park, OH (2001).

PLASTICS, COMPOSITES, AND CERAMICS Advanced Polymer Composites: Principles and Applications, B. J. Jang. ASM, Materials Park, OH (1993). Composite Materials Handbook, 2nd Ed., M.M. Schwartz, McGraw-Hill, New York (1995). Engineering Plastics and Composites, 2nd Ed., W.A. Woishnis (ed.),ASM, Materials Park, OH (1993). Engineers Guide to Composite Materials, John W. Weeton (ed.),ASM, Materials Park, OH (1986). Fabrication of Composite Materials—Source Book, M.M. Schwartz (ed.),ASM, Materials Park, OH (1985). Fundamentals of Metal Matrix Composites, S. Suresh (ed.), Butterworth-Heinemann (1993). Handbook of Composites, George Lubin (ed.),Van Nostrand Reinhold, New York (1982). Handbook of Plastics, Elastomers and Composites, 2nd Ed., C.A. Harper (ed.), McGraw-Hill (1992). Handbook of Thermoset Plastics, S.H. Goodman, Noyes Publications (1986). Modern Plastics Encyclopedia, published annually by Modern Plastics Magazine, a McGraw-Hill publication. Plastic Blow Molding Handbook, N. C. Lee (ed.),Van Nostrand Reinhold (1991). Plastic Part Technology, E.A. Muccio, ASM, Materials Park, OH (1991). Plastic Materials and Processes, S. Schwartz and S. H. Goldman,Van Nostrand Reinhold, New York (1982). Plastics Product Design Engineering Handbook, 2nd Ed., Sidney Levy and J. H. DuBois, Chapman & Hall (1984).

S3

Plastics Processing Technology, E.A.Muccio,ASM, Materials Park, OH (1994). Plastics Process Engineering, James L.Throne,Marcel Dekker, New York (1979). Plastics’ Technology Handbook, 2nd Ed., M. Chanda and S. K. Roy (eds.), Marcel Dekker (1992). Structural Ceramics, M. Schwartz, McGraw-Hill (1994). Characterization and Failure Analysis of Plastics, ASM, Materials Park, OH (2003). Fundamentals of Composite Manufacturing: Materials, Methods, and Applications, A. Brent Strong, Society of Manufacturing Engineers (1989). Metal Matrix Composites, N. Chawla and K.K. Chawla, Springer, (2006). Plastic Injection Molding – 4 volume set, Society of Manufacturing Engineers (1996-1999). Vol 1: Manufacturing Process Fundamentals Vol 2: Material Selection Fundamentals & Product Design Vol 3: Mold Design & Construction Fundamentals Vol 4: Manufacturing Startup and Management

ELEVATED TEMPERATURE APPLICATIONS ASM Specialty Handbook - Heat-Resistant Materials,ASM (1997). Engineer’s Guide to High Temperature Materials, F. J. Clauss, Addison Wesley, Reading, MA (1969). High Temperature Property Data: Ferrous Alloys, M. F. Rothman (ed.),ASM, Materials Park, OH (1987). Properties of Refractory Metals, W.D.Wilkinson, Gordon and Breach (1969). Source Book on Materials for Elevated Temperature Applications, ASM, Materials Park, OH (1979).

ELECTRONIC AND MAGNETIC APPLICATIONS ASM Ready Reference: Electrical and Magnetic Properties of Materials, ASM (2000). Electronic Materials Handbook, Vol. 1, Packaging, ASM (1989). Electronic Materials & Processes Handbook, 2nd Ed., C.A. Harper and R. M. Sampson, McGraw-Hill (1994). Electronic Packaging and Interconnection Handbook, C.A. Harper, McGraw-Hill, New York (2000). Fundamentals of Semiconductor Processing Technology, B. ElKareh Kluwer Academic Publishers, Boston (1995). Integrated Circuit Fabrication Technology, D. J. Elliott, McGrawHill, New York (1989). Soldering in Electronics Assembly, M. Judd and K. Brindley, Reed International Books, Boston (1992). Springer Handbook of Electronic and Photonic Materials, S. Kasap and P. Capper (Eds.), Springer (2006). The Magnetic Properties of Materials, J. E. Thompson, CRC Press, Cleveland, OH (1968). The Science and Engineering of Microelectronic, S.A. Campbell, Oxford University Press (2001).

DESIGN Application of Fracture Mechanics—for Selection of Metallic Structural Materials, J. E. Campbell, et al., ASM, Materials Park, OH (1982).

S4

Selected References for Additional Study

Atlas of Stress-Strain Curves, H. E. Boyer (ed.),ASM, Materials Park, OH (1986).

Copper Alloy Pressure Die Casting, A.A.Machonis (ed.), International Copper Research Assoc., New York (1975).

Atlas of Fatigue Curves, Howard E. Boyer (ed.),ASM, Materials Park, OH (1986).

WELDING AND JOINING

Atlas of Stress Corrosion and Corrosion Fatigue Curves, A. J.McEvily,ASM,Materials Park, OH (1990).

Adhesives Technology Handbook, Arthur H. Landrock, Noyes Publications (1985).

Axiomatic Design, Nam P. Suh, Oxford University Press (2001).

Brazing Handbook, American Welding Society (1991).

Concurrent Design of Products and Processes, J. L. Nevins and Dan Whitney, McGraw-Hill (1989).

Ceramic Joining, M.M. Schwartz,ASM, Materials Park, OH (1990).

Engineering Design: A Materials and Processing Approach, 3rd Ed., George Dieter, McGraw-Hill (2000).

Design of Weldments, James F. Lincoln Foundation.

Fatigue Data Book: Light Structural Alloys, ASM, Materials Park, OH (1995). Fracture Mechanics: Fundamentals and Applications, T. L. Anderson, CRC Press (1991). Fundamentals of Tool Design, 5th Ed., D. Smith & J. Nee, Society of Manufacturing Engineers (2003). Handbook of Product Design for Manufacturing—A Practical Guide for Low-Cost Production, James G. Bralla (ed.), McGrawHill, New York (1986). Mechanical Assemblies, Daniel E. Whitney, Oxford University Press, (2004). Introduction to Engineering Design, Andrew Samuel and John Weir, Buttorworth Heinemann, (1999). Material Selection in Mechanical Design, Michael Ashby, Butterworth Heineman, (2000). Product Design for Manufacture and Assembly, 2nd Edition, G. Boothroyd, P. Dewhurst, W. Knight, Marcel Decker, (2002).

Design of Welded Structures, James F. Lincoln Foundation. Handbook of Adhesives, 2nd Ed., Irving Skiest (ed.),Van Nostrand Reinhold (1977). The Basics of Soldering, A. Rahn,Wiley (1993). Joining of Composite Matrix Materials, M.M. Schwartz,ASM, Materials Park, OH (1994). Metals Joining Manual, M.M. Schwartz, McGraw-Hill (1979). Modern Welding Technology, 2nd Ed.,H. B. Cary, Prentice Hall, NJ (1989). Soldering Manual, 2nd Ed., American Welding Society (1978). Solders and Soldering, 3rd Ed.,H.H.Manko,McGraw-Hill (1994). Source Book on Electron Beam and Laser Welding, ASM,Materials Park, OH (1980). Source Book on Brazing and Brazing Technology,ASM,Materials Park, OH (1980). Standard Handbook of Fastening and Joining, 2nd Ed., R.O. Parmley, McGraw-Hill (1994).

The Principles of Design, Nam P. Suh, Oxford University Press (1990).

Welding Encyclopedia, L.B.MacKenzie, 16th Ed., revised and reedited by T.B. Jefferson, Monticello Books, Morton Grove, IL (1968).

The Principles of Material Selection for Engineering Design, Pat L. Mangonon, Prentice Hall (1999).

Welding Handbook, 8th Ed.,American Welding Society, New York (1987).

Tool Design, 3rd Ed., C. Donaldson, G. LeCain, and V. C. Gould, Glencoe (1993).

Brazing, 2nd Edition, M.M. Schwartz, ASM, Materials Park, OH (2003).

CASTING

Friction Stir Welding and Processing, R.S. Mishra and M.W. Mahoney (Eds.), ASM, Materials Park, OH (2006).

Cast Metals Handbook, 4th Ed., American Foundryman’s Society (1957).

Principles of Brazing, D.M. Jacobson and G. Humpston,ASM, Materials Park, OH (2005).

Iron Castings Handbook, Charles F.Walton, Iron Castings Society (1981).

Principles of Soldering, G. Humpston and D.M. Jacobson, ASM, Materials Park, OH (2004).

Gray and Ductile Iron Casting Handbook,Gray and Ductile Iron Founder’s Society, Cleveland, OH (1971).

Welding Technology for Engineers, B. Raj et. al., Narosa publishing House and ASM, Materials Park, OH (2006).

Steel Castings Handbook, 6th Ed., Steel Founder’s Society of America, OH (1995).

FABRICATION AND FORMING

Investment Casting Handbook—1980, Investment Casting Institute, Chicago, IL (1979). Principles of Metal Casting, 2nd Ed.,Heine, Loper and Rosenthal,McGraw-Hill (1967). The NFFS (Non-Ferrous Founders Society) Guide to Aluminum Casting Design: Sand and Permanent Mold, NFFS (1994). Copper, Brass and Bronze Castings: Their Structures, Properties, and Applications, Non-Ferrous Founder’s Society, Cleveland, OH (1961)—2 volumes.

Finite-Element Plasticity and Metalforming Analysts, G.W. Rowe, C. E. N. Sturgess, P. Hartley, and I. Pillingen, Cambridge University Press (1991). Forging Industry Handbook, 3rd Ed.,T.G. Bryer (ed.), Forging Industry Association, Cleveland, OH and ASM (1981). Forging Materials and Practices,A.M. Sabroff et al., Reinhold, New York (1968). Handbook of Metalforming Processes, B.Avitzur,Wiley-Interscience,New York (1983).

Selected References for Additional Study

S5

Handbook of Metal Forming, Kurt Lange (ed.), McGraw-Hill, New York (1985).

Powder Metallurgy Processing: New Techniques and Analyses, H.A. Kuhn and A. Lawley,Academic Press (1978).

Handbook of Fabrication Processes, O.D. Lascoe,ASM, Materials Park, OH (1988).

Powder Metallurgy Design Manual, 3rd Ed., Metal Powder Industries Federation (1998).

Mechanics of Plastic Deformation in Metal Processing, E.G.Thomsen,C.T.Yang, and S.Kobayashi,Macmillan (1965).

Powder Metallurgy, Principles and Applications, F.V. Lenel, Metal Powder Industries Federation, Princeton, NJ (1980).

Mechanics of Sheet Metal Forming: Material Behavior and Deformation Analysis, D. Koistinen, Plenum (1977).

Powder Metallurgy Equipment Manual—3, Samuel Bradbury (ed.), MPIF (1986).

Metal Forming: Fundamentals and Applications, T.Altan, S-I Oh, and H. Gegal,ASM,Materials Park, OH (1983).

Powder Injection Molding, R.M.German, Metal Powder Industries Federation (1990).

Metalforming and the Finite-Element Method, S. Kohavashi, S.Oh, and T. Altan, Oxford University Press (1989).

Fundamentals of Powder Metallurgy, Leander Pease and William West, Metal Powder Industries Federation (2002)

Metalworking Science and Engineering, Edward M. Mielnik, McGraw-Hill (1991).

Introduction to Powder Metallurgy, F.Thummler and R. Oberacker, The Institute of Materials (1994).

Techniques of Pressworking Sheet Metal, 2nd Ed.,D. F. Eary and E. A. Reed, Prentice Hall (1974).

Powder Injection Molding: Design & Applications, Randall M. German, Innovative Materials Solutions (2003).

Cold and Hot Forging: Fundamentals and Applications, T. Altan et. al., ASM, Materials Park, OH (2005).

Powder Metallurgy & Particulate Materials Processing, Randall M. German, Metal Powder Industries Federation (2005).

Die Design Handbook, 3rd Edition, David A. Smith, Society of Manufacturing Engineers (1990).

MACHINING

Extrusion, 2nd Ed., M. Bauser et. al (Eds.), ASM, Materials Park, OH (2006).

Analysis of Material Removal Processes, W. R.DeVries, SpringerVerlag (1992).

Fundamentals of Hydroforming, Harjinder Singh, Society of Manufacturing Engineers (2003).

Fundamentals of Metal Machining and Machine Tools, 3rd Ed. G. Boothroyd and Winston Knight, Taylor & Francis (2006).

Fundamentals of Pressworking, David A. Smith Society of Manufacturing Engineers (1994).

Machining of Plastics, Akira Kobayashi, Krieger Pub. Co. (1981).

Fundamentals of Tool Design, 5th Edition, David A. Smith and John Nee (Eds), Society of Manufacturing Engineers (2003).

Machining Data Handbook, 3rd Ed., (2 volumes) Machinability Data Center, Cincinnati, OH (1980). Machining—Theory and Practice,ASM,Materials Park, OH (1950).

Handbook of Workability and Process Design, G.E. Dieter et. al. (Eds.), ASM, Materials Park, OH (2003).

Machining and Metal Working Handbook, 3rd Ed. Bah.Walsh and D. Cormien, McGraw-Hill, (2006).

Press Brake Technology, S. Benson, Society of Manufacturing Engineers (1997).

Mechanics of Machining, P. L. B. Oxlev, Ellis Harwood Ltd. (1989).

Progressive Dies: Principles and Practices of Design and Construction, Don Peterson (Ed.), Society of Manufacturing Engineers (1994).

Metal Cutting, 4th Ed., Edward M. Trent, Paul K. Wright, Butterworth Heineman (2000). Metal Cutting Mechanics, N.N. Zorev, Pergamon Press, (1966).

Roll Forming Handbook, George T. Halmos, Taylor and Francis (2005)

Metal Cutting Principles, 2nd Ed. M. C. Shaw, Oxford University Press (2005).

Sheet Metal Forming Processes and Die Design,Vukota Boljanovic, Industrial Press (2004).

Metal Cutting Theory and Practice, 2nd Ed., David A. Stephenson and John S. Agapion, Taylor & Francis, (2006).

Steel Forgings: Design, Production, Selection, Testing, and Application, E. G. Nisbett, ASTM, West Conshohocken, PA (2005).

HEAT TREATMENT

Tube Forming Processes: A Comprehensive Guide, Greg Miller, Society of Manufacturing Engineers (2002).

Atlas of Isothermal and Cooling Transformation Diagrams, ASM,Materials Park, OH (1977).

POWDER METALLURGY

Atlas of Isothermal and Cooling Transformation Diagrams for Engineering Steels, ASM,Materials Park, OH (1980).

Handbook of Powder Metallurgy, H.H.Hausner, Chemical Publishing Co. (1973).

Atlas of Time-Temperature Diagrams for Nonferrous Alloys, G.VanderVoort (ed.),ASM, Materials Park, OH (1991).

Metallurgy, J. S.Hirschorn,American Powder Metallurgy Institute, New York (1969).

Atlas of Time-Temperature Diagrams for Irons and Steels,G.VanderVoort (ed.),ASM, Materials Park, OH (1991).

Injection Molding of Metals and Ceramics, Randall M. German and Animesh Bose,Metal Powder Industries Federation (1997).

Handbook of Quenchants and Quenching Technology, G. E.Totten, C. E. Bates, and N. A. Clinton,ASM, Materials Park, OH (1992).

Powder Metallurgy Science, 2nd Ed., R.M.German, Metal Powder Industries Federation (1994).

Heat Treater’s Guide: Practices and Procedures for Irons and Steels, 2nd Ed.,ASM,Materials Park, OH (1995).

S6

Selected References for Additional Study

Heat Treater’s Guide: Practices and Procedures for Nonferrous Alloys, ASM (1996). Heat Treatment, Structure and Properties of Nonferrous Alloys, Charles R. Brooks,ASM,Materials Park, OH (1982). Heat Treating Data Book, 9th Ed., Seco/Warwick Corporation (2006). Practical Heat Treating, 2nd Ed. J.L. Dossett and H.E. Boyer, ASM,Materials Park, OH (2006). Practical Induction Heat Treating, R. E.Haimbaugh, ASM (2001). Principles of Heat Treatment of Steel, G. Krauss,ASM, Materials Park, OH (1980). Principles of Heat Treatment, M.A.Grossman and E. C. Bain,ASM, Materials Park, OH (1964). Principles of the Heat Treatment Plain Carbon and Low Alloy Steels, C. R. Brooks,ASM,Materials Park, OH (1996). Steel and Its Treatment, Bofors Handbook, K. E.Thelning, Butterworths (1975). Steel Heat Treatment Handbook, 2nd Ed. G. E.Totten and M. A. H. Howes,Marcel Dekker (2006). Surface Hardening of Steels: Understanding the Basics, J. R.Davis (ed.), ASM (2002).

NACE Corrosion Engineer’s Reference Book, 2nd Ed., R. S. Treseder (ed.), National Association of Corrosion Engineers (NACE) (1991). Corrosion Resistance Tables, 4th Ed., P.A. Schweitzer,Marcel Dekker (1995). An Introduction to Metallic Corrosion, 3rd Ed.,Ulick R. Evans, Edward Arnold Ltd. and ASM (1981). Corrosion and Its Control—An Introduction to the Subject, Atkinson and Van Droffelaar, National Association of Corrosion Engineers, Houston, TX (1982). Corrosion Engineering, 3rd Ed.,M.G. Fontana, McGraw-Hill, New York (1986). Corrosion and Corrosion Control, 3rd Ed.,H.H.Uhlig and R.Winston Revie,Wiley-Interscience, New York (1985). Corrosion, 2nd Ed.—Vol. 1: Corrosion of Metals and Alloys and Vol. 2: Corrosion Control, L. L. Shrier (ed.). Material Selection for Corrosion Control, S. I. Chawla and R. K. Gupta,ASM, Materials Park, OH (1993). Corrosion Prevention by Protective Coatings, Charles G. Munger, National Association of Corrosion Engineers (1984). Fundamentals of Electrochemical Corrosion, E. E. Stansbury and R. A. Buchanan, ASM (2000).

SURFACES AND FINISHES

Corrosion: Understanding the Basics, J. R.Davis (ed.),ASM (2000).

Advanced Machining Technology Handbook, James Brown, McGraw-Hill, (1998).

NDT AND METROLOGY

Metal Finishing: Guidebook Directory, Metals and Plastics Publications, Inc., Westwood, NJ (published annually). Surface Finishing Systems, George Rudski,ASM,Materials Park, OH (1983). Electroplating Engineering Handbook, 4th Ed., Lawrence Durney (ed.),Van Nostrand-Reinhold (1984). Properties of Electroplated Metals and Alloys, 2nd Ed., Wm. H. Safranek, Amer. Electroplaters and Finishers Soc. (1986). Metal Cutting and High Speed Machining, Ed. By D. Dudzinski, et.al, Kluwer Academic (2002). Metallizing of Plastics: Handbook of Theory and Practice, R. Suchentruck, Finishing Publications Ltd and ASM (1993). The Surface Treatment and Finishing of Aluminum and Its Alloys, 6th Ed., S.Wernick, R. Pinner and P. B. Sheasby, Finishing Publications Ltd. and ASM (2001). Surface Engineering for Corrosion and Wear Resistance, J. R.Davis (ed.), IOM Communications and ASM (2001). Coatings and Coating Processes for Metals, J.H. Lindsay (ed.),ASM (1998). Guide to High Performance Powder Coating, Bob Utech, Society of Manufacturing Engineers (2002).

Hardness Testing, 2nd Ed., H. Chandler (ed.), ASM (1999). ISO System of Limits and Fits, General Tolerances and Deviations, American National Standards Institute. Metallography: Principles and Practice, George VanderVoort, McGraw-Hill (1984). Nondestructive Testing Handbook, 2nd Ed. (multiple volumes), American Society for Nondestructive Testing (1982–1985). Nondestructive Testing, Louis Cartz, ASM, Materials Park, OH (1995). Practical Non-Destructive Testing, 2nd Ed., B. Raj,T. Jaykumar, and M.Thavasimuthu, Narosa Publishing and ASM (2002). The Testing of Engineering Materials, 4th Ed., H. E Davis,G. E.Troxell, and G. F.W. Hauck, McGraw-Hill, New York (1982). Springer handbook of Materials Measurement Methods, H. Czichos et. al. (Eds.), Springer (2006). Tensile Testing, 2nd Ed., J.R. Davis (Ed.), ASM, Materials Park, OH (2004).

QUALITY CONTROL, TAGUCHI METHODS AND SIX SIGMA Creating Quality, William J. Kolarik, McGraw-Hill (1995).

Handbook of Thermal Spray Technology, J.R. Davis (ed.), Thermal Spray Society and ASM, Metals park, OH (2004).

Guide to Quality Control, Kaoru Ishikawa, Asian Prod. Organization (1984).

User’s Guide to Powder Coating, 4th Edition, Nicholas Liberto, Society of Manufacturing Engineers (2003).

Introduction to Statistical Quality Control, 4th Ed., D. C. Montgomery, Wiley (2001).

CORROSION

Introduction to Quality Engineering, Genichi Taguchi, Kraus Int. Pub. (1986).

Handbook of Corrosion Data, 2nd Ed., B. Craig and D. Anderson (eds.),ASM, Materials Park, OH (1995).

Juran’s Quality Planning & Analysis, 5th Ed. By F.M. Gryna, R.C.H. Chua and J.A. DeFeo, McGraw-Hill (2002).

Selected References for Additional Study

S7

Process Quality Control, 2nd Ed., E. R.Ott and E.G. Schilling, McGraw-Hill (1990).

Fractography in Failure Analysis,American Society for Testing and Materials, Philadelphia, PA (1978).

Quality Control and Industrial Statistics, 5th Ed, Acheson J Duncan, Irwin, (1986).

Handbook of Case Histories in Failure Analysis:Vols. 1 and 2, K.A. Esaklul (ed.),ASM, Materials Park, OH (1992–93).

Quality Engineering in Production Systems, G. Taguchi, E.A. ElSayed, and T. Hsiang, McGraw-Hill (1989).

Metal Failures: Mechanisms, Analysis, Prevention, A. J. McEvily (ed.), John Wiley & Sons, New York (2002).

Quality Control Handbook, 4th Ed., J.M. Juran and F. M. Gigna, McGraw-Hill (1988).

Metallography in Failure Analysis, J. L. McCall and P. M. French, Plenum (1977).

Quality, Productivity, and Competitive Position, W. Edwards Deming, MIT Press, Boston (1982).

Metallurgical Failure Analysis, C. R. Brooks and A. Choudhury, McGraw-Hill (1993).

Quality Planning and Analysis, 2nd Ed., Juran and Gryan, McGraw-Hill (1988).

Product Liability and the Reasonably Safe Product,A. S.Weinstein et al., Wiley-Interscience, New York (1978).

Statistical Quality Design and Control, 2nd Ed. R. E.De Vor,T. Chang, and J.W. Sutherland, Macmillan (2007).

Residual Stresses and Fatigue in Metals, J.O.Almen and P. H. Black, McGraw-Hill, New York (1963).

Statistical Quality Control, 6th Ed., Eugene L. Grant and Richard S. Leavenworth, McGraw-Hill (1988).

Stress Corrosion Cracking: Materials Performance and Evaluation, Russell Jones (ed.),ASM, Materials Park, OH (1992).

Taguchi Techniques for Quality Engineering, 2nd Ed. P. J. Ross, McGraw-Hill (1996).

Tool and Die Failures Source Book, ASM, Materials Park, OH (1982).

The Six Sigma Handbook, Ed. By Thomas Pyzdek, McGraw-Hill, (2003).

Understanding How Components Fail, 2nd Ed., Donald J. Wulpi, ASM, Materials Park, OH (1999).

Total Quality Control, A.V. Feigenbaumn, McGraw-Hill (1961).

Why Metals Fail, R.D. Barer and B. F. Peters, Gordon and Breach, New York (1970).

Quality Engineering in Production Systems, Genichi Taguchi, Elsayed A. Edsayed, and Thomas C. Hsiang,McGraw-Hill (1989). Reliability and Maintainability Management, Balbir S. Dhillon and Hans Reiche, Von Nostrand Reinhold (1985). Quality Control for Managers and Engineers, Elwood G. Kirkpatrick, Wiley (1970). Total Quality Management—Text, Cases and Readings, Joel E. Ross, St. Lucie Press (1993). Zero Quality Control: Source Inspection and the Poka-Yoke System, Shigeo Shingo, Productivity Press (1986). Lean Six Sigma, M.L. George, McGraw-Hill (2002). The Six Sigma Black Belt Handbook, McCarty et.al. (2005). The Six Sigma Performance Handbook, P. Gupta, McGraw-Hill (2005).

FAILURE ANALYSIS AND PRODUCT LIABILITY Analysis of Metallurgical Failures,V. J. Conangelo and F.A. Heiser, Wiley-Interscience (1974). Case Histories in Failure Analysis, ASM, Materials Park, OH (1979). Engineering Aspects of Product Liability, V. J. Conangelo and P. A.Thornton, ASM, Materials Park, OH (1981). Failure Analysis of Engineering Structures: Methodology and Case Histories, V. Ramachandran et. al, ASM, Materials Park, OH (2005). Failure Analysis: Case Histories, F. K. Naumann, ASM, Materials Park, OH (1983). Failure Analysis:The British Engine Technical Reports, F. K. Hutchings and P. M. Unterweiser, ASM, Materials Park, OH (1981). Failure of Materials in Mechanical Design, J.A. Collins, Wiley-Interscience (1981).

MANUFACTURING SYSTEMS ANALYSIS Computational Intelligence in Design and Manufacturing, Andrew Kusiak, Wiley (2000). Design and Analysis of Lean Production Systems, R.G. Askin and J.B. Goldberg, Wiley (2002). Fundamentals of Systems Engineering, C. Jotin Kristy and Jamshid Mohammadi, Prentice-Hall (2001). Manufacturing Systems Design and Analysis, 2nd Ed., B.Wu, Chapman and Hall (1994). Manufacturing Systems Engineering, S. B.Gershwin, PTR, Prentice Hall (1994). Manufacturing Systems Engineering, 2nd Ed., K.Hitomi, Taylor and Francis Ltd. (1996). Modeling and Analysis of Manufacturing Systems, R.G.Askin and C. R. Standridge,Wiley (1993). Performance Modeling of Automated Manufacturing Systems, N.Viswanadham and Y. Narahari, Prentice Hall (1992). Stochastic Models of Manufacturing Systems, J.A. Buzacott and J. C. Shanthikumar, Prentice Hall (1993). Systems Analysis and Modeling, onald W. Boyd, Academic Press (2001).

MANUFACTURING ENGINEERING 21st Century Manufacturing, P.K. Wright, Prentice-Hall, (2001). Concurrent Design of Products and Processes, J. L. Nevins and D. E.Whitney, McGraw-Hill (1989). Intelligent Manufacturing Systems, . Kusiak, Prentice Hall (1990). Manufacturing Engineering Handbook, Ed. Hwaiyu Geng, McGraw-Hill, (2004),

S8

Selected References for Additional Study

Manufacturing Engineering and Technology, 4th Ed., S. Kalpakjan and S. R. Schmid, Prentice-Hall, (2001).

Laser Materials Processing, Ed. L. Migliore, (1996).

Manufacturing Intelligence, P. K.Wright and D.A. Bourne,Addison Wesley (1988).

Non-Traditional Machining Handbook, Carl Sommer, Advance Publishing, Inc., Houston, TX (2000).

ROBOTICS

The EDM Handbook, E. B.Guitrau and Hanser Gardner, Cincinnati, OH (1997).

Robot Analysis, L-W Tsai, Wiley (1999).

Laser Machining, G. Chryssolouris, Springer-Verlag (1991).

Handbook of Industrial Robotics, Nof (ed.),Wiley (1999).

RAPID PROTOTYPING

Introduction to Robots in CIM Systems, J.A. Rehg, Prentice-Hall (2000).

Automated Fabrication: Improving Productivity in Manufacturing, M. Burns, Prentice Hall, Englewood Cliffs, NJ (1993).

Industrial Robots: Computer Interfacing and Control, W. E. Snyder, Prentice Hall (1985).

Rapid Prototyping and Other RP&M Technologies: From Rapid Prototyping to Rapid Tooling, P. F. Jacobs, SME, Dearborn, MI (1996).

Introduction to Robot Technology, P. Coiffet and M. Chizouze, McGraw-Hill (1993). Robotics and Manufacturing Automation, 2nd Ed., C. R. Asfahl, Wiley (1992).

Rapid Manufacturing:The Technologies and Applications of Rapid Prototyping and Rapid Tooling, D.T. Pham and S. S. Dimov, Springer-Verlag, London, UK (2001).

AUTOMATION, CNC, FMS AND CIM

Rapid Tooling: Technologies and Industrial Applications, Peter D. Hilton and P. F. Jacobs,Marcel Dekker, New York (2000).

An Introduction to CNC Machining and Programming, .Gibbs and T. M. Crandall, Industrial Press (1991).

User’s Guide to Rapid Prototyping, Todd Grimm, Society of Manufacturing Engineers, (2004).

Anatomy of Automation, G.H. Amber and P. S. Amber, Prentice Hall (1962).

Wohler’s Report 2005: RP, RT and RM State of the Industry, Terry Wohlers, Timecompress.com

Automatic Assembly, C. Boothroyd, C. Poli, and L. F. March, Marcel Dekker (1982).

LEAN MANUFACTURING

Automation, Production Systems, and Computer-Integrated Manufacturing, 2nd Ed., Mikell P. Groover, Prentice Hall (2001).

A Revolution in Manufacturing: The SMED System, Shigeo Shingo, Productivity Press (1985).

Computer-Aided Manufacturing, 3rd Ed. T.C. Chang, R.A. Wysk and Hsu-Pin Wang, Prentice Hall (2006).

A Study of The Toyota Production System, Shigeo Shingo, Productivity Press (1989).

Computer-Integrated Design and Manufacturing, D.D. Bedworth, M. R. Henderson, and P. M. Wolfe, McGraw-Hill (1991).

Becoming Lean, Ed. J. Liker, Productivity Press, (2004).

Engineering Robust Designs, J X. Wang, Prentice-Hall (2005).

Design, Analysis and Control and Manufacturing Cells, PED-Vol. 53, J.T. Black, B. C. Jiang, and G. J.Wiens, ASME (1991).

Introduction to Computer Numerical Control, J.V. Valentino and J. Goldenberg, Regents/Prentice Hall (1993).

Handbook of Cellular Manufacturing Systems, Shahrukh A. Irani (ed.),Wiley (1999).

Numerical Control and Computer Aided Manufacturing, R. S. Pressman and I. J. E. Williams, Wiley (1977).

Introduction to TPM:Total Productive Maintenance, Seiichi Nakajima, Productivity Press (1988).

COST ESTIMATING

JIT Factory Revolution, H. Hirano and J T. Black, Productivity Press (1988).

Cost Estimator’s Reference Manual, R.D. Steward and R.W.Wyskida,Wiley (1987). Engineering Cost Estimating, 3rd Ed., P. E.Ostwald, Prentice Hall (1992). Realistic Cost Estimating for Manufacturing, 2nd Ed.,W.Winchell, Society of Manufacturing Engineers (1989).

Japanese Manufacturing Techniques: Nine Hidden Lessons in Simplicity, Richard J. Schonberger (1982). Free Press. Kaizen for Quick Changeover, Kenichi Sekine and Keisuke Arai (translated by Bruce Talbot), Productivity Press (1992). Kanban: Just-In-Time at Toyota, translation by D. J. Lu, Japan Management Association, Productivity Press (1986).

NTM/LASER MACHINING SOURCES

Kawasaki U.S.A.:A Case Study, Robert Hall, APICS (1982).

Advance Machining Technology Handbook, James Brown, McGraw-Hill, New York (1998).

Lean Production Simplified, Pascal Dennis, (2002).

Advanced Methods of Machining, J.A.McGeough, Chapman and Hall, New York (1988).

One-Piece Flow: Cell Design for Transforming the Production Process, Kenichi Sekine, Productivity Press (1990).

Advanced Machining Processes, H. El-Hofy, McGraw-Hill, (2005).

The Design of the Factory with A Future, J T. Black, McGraw-Hill (1991).

Laser Material Processing,W.M. Steen, Springer, London, England (1998).

The Machine That Changed The World, James P. Womack, Daniel T. Jones, and Daniel Roos, Harper Perennial (1991).

Selected References for Additional Study Just-in-Time in American Manufacturing, William Duncan, SME, (1988). Kaikaku, The Power and Magic of Lean, N. Bodek, PCS Press, (2004). Lean Assembly, Michael Baudin, Productivity Press (2002). Lean Enterprise Systems, Steve Bell, Wiley (2006). Lean Manufacturing Implementation, D.P. Hobbs, APICS (2004). The Toyota Product Development System, J.M. Morgan and J.K. Liker, Productivity Press, (2006). Toyota Production System: Beyond Large-Scale Production, Taiichi Ohno, Productivity Press (1988). Toyota Production System—An Integrated Approach to Just-InTime, 3rd Ed., Yasuhiro Monden (1998).

S9

World Class Manufacturing, Richard J. Schonberger,The Free Press (1986). World Class Manufacturing Casebook: Implementing JIT and TOC, Richard J. Schonberger,The Free Press (1987). Zero Inventories, Robert W. Hall, Dow Jones-Irwin (1983). Inside the Mind of Toyota, Hino, Satuski, Productivity Press (2006). Factory Physics, W.J. Hopp, and M.L. Spearman, McGraw-Hill (2001). Lean Thinking, James Womack, Jones, Danie, Simon & Schuster, New York, (1996). Competitive Manufacturing Management, John Nicholas, McGrawHill, (1998). World Class Manufacturing, The Next Decade, Richard Schonberger, The Free Press, (1996).

Suggest Documents