Section Question Answer Section Question Answer Section Question Answer Section Question Answer Section Question Answer Section Question Answer

Section Triton Studio Series Question How many sizes are there for Triton Studio? Answer Triton Studio is available in three sizes: 61 and 76-key synt...
Author: Joseph McKenzie
2 downloads 11 Views 70KB Size
Section Triton Studio Series Question How many sizes are there for Triton Studio? Answer Triton Studio is available in three sizes: 61 and 76-key synth-action versions, and an 88-key weighted action model. An unprecedented list of features includes more high-quality sounds, sampling into the sequencer, resampling, up to 120-note polyphony, dual arpeggiators, more expansion ports, digital I/O, an internal hard drive, more software improvements and our most user-friendly interface yet. All of which means you can go from inspiration to master, more quickly and more intuitively. Section Triton Classic Series Question How can I change the tempo on my Triton Workstation during a song? Answer First set the Tempo Mode to Auto. Now you can either record tempo changes in real time or by event edits. To record the changes in event edit first select Master Track from Track menu. Then go to Event Edit page and scroll to the measure where you want to put a tempo change. if you now INSERT tempo change event and then save the song you changes will be retained. Section Triton Classic Series Question How do I change key on my Triton Workstation during a song? Answer First record the song (all tracks) from measure 1 to 120 for example. Now go into sequencer edit mode, access the pull down menu and select the shift note feature. For this example we will be changing the key between measure 90 and 105 and then changing it back to the original value until measure 120. First set the measure start value as 90 and the measure end value as 105. Use a shift value of +1 across the entire range of the keyboard or ALL the tracks that you want to pitch shift/transpose. This shifts the note data to the key of B from Bb for measures 90 105. Now set the measure start value as 106 and the measure end value as 120. Use a shift value of -1 across the entire range of the keyboard. This will return the track to it’s original key. Section Triton Classic Series Question I’m getting no playback from my pc sequencer software when recording Triton Workstation sounds. MIDI signals record ok but no sound returns when the play button is hit ? Answer You have to be in sequence mode and the Triton will respond to MIDI messages on all 16 channels. You have to make sure that when a track on your pc is playing, its midi is routed to your PC's midi out that is connected to the midi in on Triton. Section Triton Classic Series Question I have noticed that when my Triton Workstation is connected up to my PC sequencer I lose the arpeggiator function. How can I activate the Triton arpeggiator from the sequencer? Answer You need to make sure that the Local Control is switched on in Global Mode in the Triton for the arpeggiator to work. Also, change the MIDI clock to external. Section Triton Classic Series Question I have been trying to set up my sustain pedal to work in the Triton workstation , but nothing happens when I press it. Answer If you first select Page 2 of the Global menu, you will then need to change the Damper polarity control. If it is a non-Korg damper pedal, the polarity on the

pedal itself may need to be changed. We are unable to guarantee the operation of a non-Korg product with this machine. Section Triton Classic Series Question How can I use the Time Stretch function on my Triton Workstation in sample mode. Answer Press your sample button and load in a sample you want to stretch. Press the page menu button and choose TimeStretch. You then get options as to Sustain or Slice. Choose one of these options press ok. Now you can change the sample values to match BPM/ratio etc. Alter the parameters of the sample to change its length and time. Section Triton Studio Series Question Can I use the latest Operating system on the Triton, on the Triton Studio Answer No. The Triton Studio is a different product and needs it's own O.S. to cater for it's particular internal processor and circuitry. Section Triton Studio Series Question How do I fit an EXB-PCM card? Answer Turn off the power and remove the cable. Lift the sample memory slot cover in the top left of the front panel. Remove the card from it’s packaging. You may want to touch a metal object before you touch the card to ensure there is no static charge that can disrupt the card itself. Insert the card into one of the PCM slots. *Caution – Do not put the PCM card in one of the top 3 RAM slots. At a slant, press the card firmly into the slot, and raise it to a vertical position until the catches of the slot click into the locking holes. When doing so, pushing the catches of the slot apart to the left and right will help the card sit smoothly. To remove: Push the catches of the slot apart and the card will pop out. Section Triton Classic Series Question Can I load AKAI format samples into my Triton Rack? Answer Yes. The Triton rack will accept S1000/S3000 samples. When the loaded data is then saved, it will be saved as a Korg format .KSF or .KMP file. Section Triton Classic Series Question Can a Trinity MOSS be fitted into Triton? Answer No. The Triton and Trinity Moss are different and aren't interchangeable Section Triton Classic Series Question How do I search the sounds in each category on my Triton Rack ? Answer First move the cursor so that the category number is highlighted. Then turn the dial until the category you want to search in is displayed. You then press the ./hold button and ‘Category Hold’ will appear on screen. Then move your cursor to the sound you want to change and go through sounds in the normal way. This will then skip numbers and you will hear only the sounds in that category. Section Triton Studio Series Question In sequencer mode, how can I let it to loop more than 64 measures? Answer Goto the Track Edit page (P5), then go to the menu drop-down. You'll see 'set song length'. Select and change the length. Section Triton Studio Series Question Why can I only play one track using the MOSS bank in sequencer mode? Answer Go to P4 of the sequencer menu. Under zone/ctrl, select the MOSS tab.

There you can assign the number of voices that you want to each track. There is a maximum of six you can assign over the sequencer tracks. Section Triton Classic Series Question Can I connect an IDE hard disk to the Triton? Answer Unfortunately not. Only SCSI hard disks can be connected. Section Triton Classic Series Question What is the largest SCSI drive the Triton will recognise? Answer The Triton will recognise disks up to 4 Gb Section Triton Classic Series Question How do I send notes generated in the arpeggiator through midi? Answer Record your arpeggiated section to the sequencer using multirec then play the sequence. The notes will then go through the midi out socket. Section Triton Le Question Can I save the real-time control settings on my Triton LE? Answer Yes you can save the A and C options as a value on the dial, but on the B assignable option, you can only save what the dial has assigned to it and not the value of the dial. Use the utility button and write to global. Section Triton Classic Series Question How can I create original arpeggiator patterns from existing ones? Answer Select a preset e.g. noisy stabber. Go to global (P6) and select a blank arpeggiator such as U200. Using the pull down menu in the top right hand corner and select ‘copy arpeggio pattern’. Choose a pre written pattern and select OK. Now change the length of the arpeggio, it’s octave coverage etc. When your happy, write the arpeggiator making sure you are writing to a blank one or if you do not like the current preset, you can write over it. Section Triton Classic Series Question How can I delete a measure from a song? Answer Go to sequencer menu and choose Track Edit (P5). Change the track to the one where the measure is that is to be deleted. Pull down the menu on the top right and select Delete measure. You can then change the start & end measures for the track your working on, or delete the measure in all tracks by checking the box. Section Triton Classic Series Question Can I have a different BPM on the arpeggiated part than on the normal sequenced part? Answer No. They cannot be set independently. Section Triton Classic Series Question What is the difference between an insert and master effect? Answer An insert effect changes one track or program. The master effects change the sound globally. Section Triton Classic Series Question What is the best mode to have the keyboard in to be controlled externally? Answer You can have: 1 channel in prog mode, 8 channels in combi mode and 16 channels in sequence mode. Sequence mode gives you the maximum control capabilities.

Section Triton Classic Series Question If I bought Triton's SCSI interface would it enable me to do PC recording? Answer The SCSI interface on the Triton is not an interface for any kind of network connection to a PC or Mac. It allows you to use an external SCSI-drive for storage to store all Triton files, songs, samples, programs etc. Section Triton Classic Series Question On the Triton Rack, I believe it will play midi files from the disk drive without a sequencer? Answer You can load in a midi file and get it to play as a demo song. Load in the file in disk mode on say song 001. Go in to Multi and press the menu button. Choose RPPR and OK. Turn the dial so that 001 is highlighted. This is now the midi file you loaded in. Press f 5 to start the song playing. Section Triton Classic Series Question Can I edit the song file I loaded into my Triton Rack? Answer Yes. If you choose the utility option in the multi screen, you can change parameters like time signature, song length etc. Section Triton Classic Series Question When I control my Triton from my software, I only seem to be able to get GM sounds. Why? Answer In Global mode P0 (basic set-up). System Pref. Change the bank map to Korg and write to Global setting. This should now let you use the Triton sounds. Section Triton Classic Series Question How can I change the default length my Tritons Arpeggiator will play through? Answer In Global go to P6 User Arpeggio. Go into pattern edit and highlight the length in the top right corner of the screen. Change this value to the setting you prefer. Section Triton Studio Series Question Is it possible for the Triton Studio to remember my song in sequence mode after I turn it off or do you have to load them in each time you turn it on? Answer No. The Studio’s memory is only temporary so it will not recall any songs from it’s RAM after the power is lost. Section Triton Studio Series Question On the Triton Studio, is there any way to use more than one program on one track in sequence mode? Answer Yes. As long as their measures don't overlap within the same track just change the sounds with program change data at the point where you want the sound to change. Then revert back to the original when you need to. Section Triton Studio Series Question Can I make one of my Combi sounds delay when I play the keys, without using up an effect to do this? Answer Yes. If you use Combi menu Page 2 (Edit-track Param) and highlight the ‘other’ tab option. You can select the millisecond delay time of the note on for each timbre. Section Triton Studio Series Question When I sample a sound and stretch the length of the sample, the quality is

poor. Is there a way of improving this? Answer Yes. In Sample mode.P2 Loop Edit. Open the page menu command and select Time Stretch. Choose the sustaining option and a dialogue box will appear. There is a quality option. The higher this value is set o the better the time stretch will be. Section Triton Studio Series Question Can I make one of my real time assignable controls vary the amount if the insert effect I have in Programme mode on my Triton Studio? Answer Yes you can. Go into Page 1 (Edit basic) and highlight the controller tab. Choose the knob you wish to assign and change this to FX control 1. Then, go to menu P8 Edit insert effect. Choose the effect you wish to use and highlight the IFX1 tab. At the bottom of the page there is a Src tab. Change this to FX Control 1 also and choose the amount of Wet/Dry effect level you want. You can then real time control the effect level. Section Triton Studio Series Question Can I send the Metronome to one of the assignable outputs on the Studio? Answer Yes. In P0 in sequence mode. Choose the preferences tab. At the bottom of this page there is the metronome section. Choose the bus output select option and pick the output you wish to send the metronome click to. Section Triton Le Question If I plug a guitar into the audio input of my Triton Le, can I mix the sound with the internal effects to then record onto my D1600? Answer Yes. To set this up, go into sampling mode and press the Input preferences tab. Change the Bus of the input you are using to IFX. Now press the menu button. Select IFX and either choose an effect or select copy insert effect from the utility tab. Your main L/R output connected to the D1600 will now have your guitar and effect all played at the same time. Section Triton Classic Series Question How many memory slots does my Triton Classic have and where do I find them? Answer You can add two 72 pin SIMM cards to the Triton. Underneath the keyboard there is a silver panel that has a hump. Remove this and place the memory there Section Triton Le Question I sampled some drum sounds on the Triton LE, but when I play them the sound stops playing the moment I let my finger off the key. Is there a way to avoid this? Answer Yes. Simply convert your Multi Sample into a Program, then in Program P 2.1: Edit-Basic, there's a check box called "Hold". Check that, and then your sounds will hold to the end of your samples, regardless of how long you hold down the key. Section Triton Le Question I can seem to assign the metronome to an individual output on my LE. Answer If your operating system is earlier than 1.5, then you wont be able to unless you upgrade. To upgrade your OS goto the support section of this site (www.korg.co.uk ) and chose the dowload section. Section Triton Studio Series Question I’m playing a midi file on my Triton Studio but the sounds are all wrong. How do I get it to play the GM sounds only?

Answer Load the desired midi file from disk mode. Go into the sequencer section where the track should be ready. Press the page menu button in the top right hand corner of the screen and choose GM initialise. Press ok when prompted. All the tracks are now set to a GM sound. Section Triton Studio Series Question On the Studio, can I set up more than one song to play and make a set list from them? Answer In P1 of the sequence menu, you can add up to 99 tracks in the cue list and choose which order to play them in, even play the same song more than once. If they are midi files, you have to GM initialise each one to get the GM sounds.

Suggest Documents