Part 1 - GENERAL Description Work included: Furnish materials, labour and equipment for the complete installation of aluminum entrance doors, door frames and hardware as detailed on the drawings and specified herein. Work not included: See Specifier list. Related work specified elsewhere: See Specifier list Quality Assurance Drawings and specifications for work in this section are based upon DESA___________ series doors. (select series type: 100.350.500.100T/B.350T/B.500T/B). Whenever alternative products are to be considered, submit supporting technical literature and samples for review and comparison by Consultant 10 days prior to closing date. Performance Doors to fully comply with applicable standard specifications as typically referenced to the following requirement criteria: Air and water tightness, wind and other load resistance. Maintenance and Guarantee Provide maintenance and cleaning data in accordance with instructions under General Conditions. Provide a written guarantee from substantial completion for a period of one year on the complete installation of materials and workmanship provided under this section.
Part 2 - PRODUCTS
08/11
Materials Extrusions shall be 6063 T 6 alloy and temper, formed aluminum components shall be of suitable alloy and strength to suit their purpose and function. Fasteners shall be made of corrosion-resistant and compatible materials and of sufficient size and strength to perform their intended function. Glazing gaskets shall be extruded black, santoprene of durometer appropriate to perform their intended function. Weathering shall be elastomeric or wool pile and of size and density appropriate for their intended function. Fabrication Construct door from extrusions of size and shape as shown on shop drawings, rails and stiles shall be porthole type extrusions. Corner joinery shall be accurately assembled with mechanical clip fasteners and deep penetration plug and fillet welds. Finish All exposed surfaces shall be free of scratches and defects. Aluminum extrusions shall be finished as selected by Specifier. Standard Clear Anodizing: AA-M12C22A31 Standard Bronze Anodizing: AA-M12C22A31 Standard Black Anodizing: AA-M12C22A44 Duracron Acrylic Enamel: AAMA 2603 Duranar Fluoropolymer paint: AAMA 2605 Various Bronze Anodizing colours and Paint qualities are available upon request by the Specifier. Hardware Hardware shall be the entrance manufacturers standard unless stated otherwise by the Specifier. If alternative hardware is selected by consultant the required templates and physical hardware must be submitted for assembly and fabrication. Installation Doors shall be installed, glazed and adjusted according to the manufacturers instructions and approved shop drawings. All items in this section shall be set level, square and plumb and at their correct location and alignment with other work.
DOOR CONSTRUCTION DETAILS
A2
100 SERIES DOOR IS ILLUSTRATED ALL DESA DOORS ARE SIMILAR DUAL MOMENT CORNER CONSTRUCTION ACHIEVED BY ATTACHING A 3/16" EXTRUDED CHANNEL CLIP AT ENDS OF DOOR STILES WITH 1/4"-20 BOLTS AND 3/16" NUT PLATES.
08/11
BOTH TOP AND BOTTOM RAILS ARE ACCURATELY POSITIONED OVER THE CHANNEL CLIPS PRIOR TO APPLYING BOTH THE FILLET WELDS AT THE TOP AND BOTTOM RAIL WEBS AND THE DEEP PENETRATION PLUG WELDS TOP AND BOTTOM PROVIDING AN EXTRA HIGH STRENGTH CORNER JOINT. (FOUR WELDS PER CORNER)
GENERAL ENTRANCE DOOR INFORMATION
R.H.O.
L.H.O.
INACTIVE
ACTIVE
L.H.O.
R.H.O.
L.H.I.
R.H.I.
ACTIVE
OUTSWING
A3
R.H.I.
L.H.I.
INACTIVE INSWING
EXTERIOR STANDARD DOOR SIZES SINGLE DOOR - OPENING SIZES DOUBLE DOOR - OPENING SIZES
36" x 84" 72" x 84"
( 914 mm x 2134 mm ) ( 1829 mm x 2134 mm )
STANDARD GLASS SIZES SINGLE GLAZING SEALED UNIT
5 mm GLASS 3/4" ( 19 mm ) OVERALL
100 SERIES DOOR 350 SERIES DOOR 500 SERIES DOOR
31-5/8" x 77-1/8" 28-7/16" x 72-1/8" 25-7/16" x 68-13/16"
( 804 mm x 1959 mm ) ( 723 mm x 1832 mm ) ( 646 mm x 1748 mm )
THERMALLY IMPROVED DOOR GLASS SIZES SEALED UNIT
7/8" ( 22 mm ) OVERALL
100T/B SERIES DOOR 350T/B SERIES DOOR 500T/B SERIES DOOR
31-5/8" x 76 3/16" 28-7/16" x 72-1/2" 25-7/16" x 68-13/16"
( 804 mm x 1927 mm ) ( 723 mm x 1838 mm ) ( 646 mm x 1748 mm )
SINGLE GLAZED DOOR
SQUARE STOP
DOUBLE GLAZED DOOR
SEALED UNIT STOP
08/11
AVAILABLE GLASS STOPS
100 SERIES NARR0W STILE DOOR
A4
- OUR MOST POPULAR AND ECONOMICAL COMMERCIAL DOOR THAT COMBINES STRENGTH AND PERFORMANCE WITH THE ABILITY TO ACCEPT MOST HARDWARE APPLICATIONS. - STANDARD DOOR PACKAGE INCLUDES D1 / D2 PUSHPULL, MAXIMUM SECURITY LOCK C/W CYLINDER AND THUMBTURN, EXPOSED CLOSER, PIVOTS, SWEEP AND 4" THRESHOLD. OPTIONAL HARDWARE IS AVAILABLE UPON REQUEST. - AVAILABLE WITH VARIOUS TOP, MID AND BOTTOM RAILS SHOWN ON PAGE A13. - SINGLE GLAZING STOPS ARE SUPPLIED AS STANDARD WITH SEALED UNIT STOPS AS OPTIONAL. - STANDARD FINISHES INCLUDE CLEAR, BRONZE AND BLACK ANODIZED WITH OPTIONAL LIGHT BRONZE AND PAINTED FINISHES AVAILABLE. - COMPATIBLE WITH ALL DESA STOREFRONT FRAMING SYSTEMS.
TOP RAIL STANDARD SQUARE GLASS STOPS FOR SINGLE GLAZING
OPTIONAL SEALED UNIT GLASS STOPS
2" (50)
1 3/4" (45)
STILES (SINGLE ACTING) 1 7/8" (48)
3 3/4" (95)
1 7/8" (48) MEETING STILES
BOTTOM RAIL AND THRESHOLD
08/11
SCALE: 1/2" = 1"
350 SERIES WIDE STILE DOOR
A5
- OUR WIDE STILE DOOR PROVIDES THE EXTRA STRENGTH AND DURABILITY REQUIRED FOR THE HIGH TRAFFIC USAGE FOUND ON INSTITUTIONAL AND RETAIL APPLICATIONS. - THE ADDITION OF INTERMEDIATE PIVOT OR BUTT HINGE IS RECOMMENDED FOR HIGH TRAFFIC CONDITIONS. - ALONG WITH ACCOMMODATING ALL OUR STANDARD HARDWARE, THIS DOOR WITH ITS WIDER STILE WILL ALSO ACCEPT A LARGE SELECTION OF INSTITUTIONAL PANIC DEVICE PRODUCTS . - AVAILABLE WITH VARIOUS TOP, MID AND BOTTOM RAILS SHOWN ON PAGE A13. - SINGLE GLAZING STOPS ARE SUPPLIED AS STANDARD WITH SEALED UNIT STOPS AS OPTIONAL. - STANDARD FINISHES INCLUDE CLEAR, BRONZE AND BLACK ANODIZED WITH OPTIONAL LIGHT BRONZE AND PAINTED FINISHES AVAILABLE. - COMPATIBLE WITH ALL DESA STOREFRONT FRAMING SYSTEMS.
TOP RAIL
3 3/4" (95)
OPTIONAL SEALED UNIT GLASS STOPS
1 3/4" (45)
3 1/2" (89) STILES (SINGLE ACTING) STANDARD SQUARE GLASS STOPS FOR SINGLE GLAZING 7" (178)
3 1/2" (89) MEETING STILES BOTTOM RAIL AND THRESHOLD
08/11
SCALE: 1/2" = 1"
500 SERIES EXTRA WIDE STILE DOOR - OUR EXTRA WIDE STILE DOOR PROVIDES THE EXTRA STRENGTH AND DURABILITY REQUIRED FOR THE HIGH TRAFFIC USAGE FOUND ON INSTITUTIONAL AND RETAIL INSTALLATIONS. - ALONG WITH ACCOMMODATING ALL OUR STANDARD HARDWARE, THIS DOOR, BECAUSE OF ITS STILE WIDTH WILL ALSO ACCEPT MANY OF THE INSTITUTIONAL PANIC HARDWARE PRODUCTS AVAILABLE. - THE ADDITION OF INTERMEDIATE PIVOT OR BUTT HINGE IS RECOMMENDED FOR HIGH TRAFFIC CONDITIONS. - AVAILABLE WITH VARIOUS TOP, MID AND BOTTOM RAILS SHOWN ON PAGE A13. - SINGLE GLAZING STOPS ARE SUPPLIED AS STANDARD WITH SEALED UNIT STOPS AS OPTIONAL. - STANDARD FINISHES INCLUDE CLEAR, BRONZE AND BLACK ANODIZED WITH OPTIONAL LIGHT BRONZE AND PAINTED FINISHES AVAILABLE. - COMPATIBLE WITH ALL DESA STOREFRONT FRAMING SYSTEMS.
A6
7" (178)
OPTIONAL SEALED UNIT GLASS STOPS
5" (127) STANDARD SQUARE GLASS STOPS FOR SINGLE GLAZING
STILES (SINGLE ACTING)
7" (178)
5" (127) MEETING STILES
BOTTOM RAIL AND THRESHOLD
08/11
SCALE: 3/8" = 1"
100T/B SERIES NARROW STILE THERMALLY IMPROVED DOOR
A7
- THE T/B SERIES DOOR HAS BEEN SPECIFICALLY DESIGNED TO PROVIDE AN ENERGY EFFICIENT EXTERIOR ENTRANCE FOR THE CANADIAN CLIMATE. - A CONTINUOUS RIGID PVC SEPARATOR IS MECHANICALLY SECURED TO THE INTERIOR SIDE OF THE DOOR AT ALL RAILS AND STILES. - A HEAVY WALL ALUMINUM CLADDING IS INTERLOCKED TO THE PVC SEPARATOR FOR A CLEAN APPEARANCE AND ADDITIONAL STRENGTH. - FOR SINGLE ACTING ENTRANCE DOORS ONLY (BOTH OFFSET PIVOT AND BUTT HUNG). - OPTIONAL MID AND BOTTOM RAILS AVAILABLE AND SHOWN ON PAGE A14. - COMPATIBLE WITH MOST HARDWARE APPLICATIONS AND ALL DESA THERMALLY IMPROVED STOREFRONT SYSTEMS. TOP RAIL
3 5/16" (84)
3 5/16" (84)
2" (51)
BOTTOM RAIL AND THRESHOLD STILES (SINGLE ACTING)
ASTRAGAL OPTIONAL 1 7/8" (48)
MEETING STILES
08/11
SCALE: 1/2" = 1"
350T/B SERIES WIDE STILE THERMALLY IMPROVED DOOR
A8
- THE T/B SERIES DOOR HAS BEEN SPECIFICALLY DESIGNED TO PROVIDE AN ENERGY EFFICIENT EXTERIOR ENTRANCE FOR THE CANADIAN CLIMATE. - A CONTINUOUS RIGID PVC SEPARATOR IS MECHANICALLY SECURED TO THE INTERIOR SIDE OF THE DOOR AT ALL RAILS AND STILES. - A HEAVY WALL ALUMINUM CLADDING IS INTERLOCKED TO THE PVC SEPARATOR FOR A CLEAN APPEARANCE AND ADDITIONAL STRENGTH. - FOR SINGLE ACTING ENTRANCE DOORS ONLY (BOTH OFFSET PIVOT AND BUTT HUNG). - OPTIONAL MID AND BOTTOM RAILS AVAILABLE AND SHOWN ON PAGE A14. - COMPATIBLE WITH MOST HARDWARE APPLICATIONS AND ALL DESA THERMALLY IMPROVED STOREFRONT SYSTEMS. TOP RAIL
3 5/16" (84)
7" (178)
2" (51)
STILES (SINGLE ACTING)
BOTTOM RAIL AND THRESHOLD
ASTRAGAL OPTIONAL 3 1/2" (89)
MEETING STILES
08/11
SCALE: 1/2" = 1"
500 T/B SERIES EXTRA WIDE STILE THERMALLY IMPROVED DOOR
- THE T/B SERIES DOOR HAS BEEN SPECIFICALLY DESIGNED TO PROVIDE AN ENERGY EFFICIENT EXTERIOR ENTRANCE FOR THE CANADIAN CLIMATE. - A CONTINUOUS RIGID PVC SEPARATOR IS MECHANICALLY SECURED TO THE INTERIOR SIDE OF THE DOOR AT ALL RAILS AND STILES. - A HEAVY WALL ALUMINUM CLADDING IS INTERLOCKED TO THE PVC SEPARATOR FOR A CLEAN APPEARANCE AND ADDITIONAL STRENGTH. - FOR SINGLE ACTING ENTRANCE DOORS ONLY (BOTH OFFSET PIVOT AND BUTT HUNG). - OPTIONAL MID AND BOTTOM RAILS AVAILABLE AND SHOWN ON PAGE A14. - COMPATIBLE WITH MOST HARDWARE APPLICATIONS AND ALL DESA THERMALLY IMPROVED STOREFRONT SYSTEMS.
A9
TOP RAIL
7" (178)
5" (127) STILES (SINGLE ACTING)
7" (178)
5" (127)
ASTRAGAL OPTIONAL MEETING STILES BOTTOM RAIL AND THRESHOLD
