sea-doomove trailers
sea-doomovel F ully adjustable carpeted bunks (side-to-side/front-to-back) allow you to change bunk angles to fit all PWCs
R oller bunk system also simplifies unloading and loading
C ustom frame design requires less water to load and unload watercraft
S ealed maintenance-free wheel bearings for added peace of mind
SEA-DOO MOVE i WITH LEAF SPRINGS SUSPENSION WITH TORSION SUSPENSION
(Not illustrated) Adjustable winch post with non-marking bow rollers.
WITH LEAF SPRINGS SUSPENSION 000T5CA00 Galvanized 000T5CD00 Black painted ■
■
WITH TORSION SUSPENSION (Not illustrated) 000T5CG00 Galvanized 000T5CJ00 Black painted ■
■
Overall length
12' 5"
Overall width
4' 10"
Width between fenders 3' 9" Overall height (fenders) 24" Overall height (winch)
31.5"
Coupler
2.0"
Approx. weight
231 lb
Carrying capacity
1,235 lb
Tire size
4.80 x 12
SEA-DOO MOVE i WITH iCATCHtm with torsion suspension
Trailer shown with optional accessories.
000T5CB00 Galvanized 000T5CE00 Black painted ■
■
Automatic iCatch and release system using a quick-snap handle built into the handle support eases manipulation and process of loading and unloading watercraft. Premium torsion suspension system provides low ride height and better handling.
Overall length
13' 6"
Overall width
5' 10"
Width between fenders 4' 10" Overall height (side rails) 35" Overall height (iCatch) 42" Coupler
2.0"
Approx. weight
324 lb
Carrying capacity
1,179 lb
Tire size
4.80 x 12
Sea-Doo Move I with walk pad with torsion suspension
Trailer shown with optional accessories.
000T5CH00 Galvanized 000T5CK00 Black painted ■
■
Innovative walk pad guidance system allows you to conveniently walk around to access your PWC. Adjustable winch post with non-marking bow rollers. Premium torsion suspension system provides low ride height and better handling.
Overall length
13' 6"
Overall width
5' 10"
Width between walk pad 4' 3" Overall height (walk pad) 35" Coupler
2.0"
Approx. weight
359 lb
Carrying capacity
1,144 lb
Tire size
4.80 x 12
Sea-Doo Move I with iCatch and Walk pad with torsion suspension
Trailer shown with optional accessories.
000T5CC00 Galvanized 000T5CF00 Black painted ■
2
■
Automatic iCatch and release system using a quick-snap handle built into the walk pad eases manipulation and process of loading and unloading watercraft. Torsion suspension system provides low ride height and better handling. Innovative walk pad guidance system allows you to conveniently walk around to access your PWC.
Overall length
13' 6"
Overall width
5' 10"
Width between walk pad 4' 3" Overall height (walk pad) 35" Overall height (iCatch) 42" Coupler
2.0"
Approx. weight
359 lb
Carrying capacity
1,144 lb
Tire size
4.80 x 12
andMOVEll A ll models are available both in galvanized frame for extended life in all weather conditions or in black painted version A djustable bunk system and catcher adapt to different types of Sea-Doo watercraft, and help properly position watercraft to improve handling while towing
Did you know... The iCatch and walk pad can make your life easier? The iCatch allows you to spend less time on the ramp and more time in the water, while the walk pad serves as guidance when the trailer is underwater. You Do Now!
Sea-Doo Move II WITH LEAF SPRINGS SUSPENSION
Adjustable winch post with non-marking bow rollers.
Overall length
16' 10"
Overall width
8' 2"
Width between fenders 6' 9" Overall height (fenders) 29"
000T6CA00 Galvanized 000T6CC00 Black painted ■
■
Overall height (winch)
39"
Coupler
2.0"
Approx. weight
485 lb
Carrying capacity
2,456 lb
Tire size
ST185/80D13
Sea-Doo Move II with iCatch WITH torsion suspension
Trailer shown with optional accessories.
000T6CB00 Galvanized 000T6CD00 Black painted ■
■
3
Automatic iCatch and release system using a quick-snap handle built into the handle support eases manipulation and process of loading and unloading watercraft. Torsion suspension system provides low ride height and better handling.
Overall length
16' 8"
Overall width
8' 5"
Width between fenders 8' 2" Overall height (center rail) 4' 3" Overall height (iCatch) 3' 9" Coupler
2.0"
Approx. weight
591 lb
Carrying capacity
2,359 lb
Tire size
ST185/80D13
key featureS included
single SEA-DOO MOVE i
SEA-DOO MOVE i WITH iCATCH
double
Sea-Doo Move I with walk pad
Sea-Doo Move I with iCatch and Walk pad
1/5 year*
1/5 year*
Sea-Doo Move II
Sea-Doo Move II with iCatch
Adjustable iCatch system Rugged and durable hot-dipped galvanized finish (optional) Rugged and durable black powder-coat finish (standard) 8 adjustable rollers (4’’ left to right, 8-degree angle) 16 adjustable rollers (4’’ left to right, 8-degree angle) Non-marking rollers Blow molded walk pad 2 adjustable wooden bunks with carpet (4’’ left to right, 8-degree angle) Adjustable winch strap(s) Multi adjustable axle Torsion rubber suspension (for smoother ride) Leaf springs suspension Tire size: 4.80” x 12” Tire size: ST185/80D13 Ground wired Fully enclosed wiring harness Submersible lights Coupler stand Suspended plastic fender for better splash protection Suspended “stand on” plastic fender for better splash protection Safety cable (for iCatch mechanism) No-maintenance sealed bearing iCatch bow cup (see p.47) (req’d only with iCatch and some PWC) Marine jack (optional) Walk pad carpet (optional) PWC guiding rails Warranty *One year complete warranty and 5 years on frame and axle.
4
1/5 year*
1/5 year*
1/5 year*
1/5 year*
Move I
Move II
Spare wheel support
Includes hardware necessary for installation. 295100500 - Sea-Doo Move I Trailers ■ Painted Black 295100499 - Sea-Doo Move I Trailers ■ Galvanized 295100501 - Sea-Doo Move II Trailers ■ Zinc coated
Spare Wheel
12” (30 cm) steel spare wheel and tire. (Not illustrated) 295100410 - Sea-Doo Move I Trailers ■ Painted Silver 295100409 - Sea-Doo Move I Trailers ■ Galvanized
Walk pad carpet kit
Complete walk pad carpet kit improves footing and design of Sea-Doo Move I with walk pad trailer by adding traction mats. Kit includes four 3M self-adhesive carpets for fast, clean installation. 295100398 - Sea-Doo Move I Trailers with walk pad
13” (33 cm) steel spare wheel and tire. 295100502 - Sea-Doo Move II Trailers ■ Galvanized 295100503 - Sea-Doo Move II Trailers ■ Painted Silver
iCatch Bow cup
Adaptor cup replacing existing bow eye on all Sea-Doo PWCs. Standard on GTI LTD and up models. 295100546 - Sea-Doo Move I & II Trailers with iCatch
5
Marine Jack
1200 lb (544 kg) heavy-duty swivel mount caster jack. Corrosion resistant zinc plated finish. Provides 12” (30 cm) of screw travel and up to 27” (69 cm) of lift. 295100399 - Sea Doo Move I & II Trailers
MINUTE!
Easy in, Easy out, in ONE MINUTE! release the safety lock and unhook the security cable
access your PWC by the walk pad guidance system, seat and saddle up
unlatch the iCatch handle
glide off the roller bunk system and slide into the water
4 easy steps. no stress. Off you go!
Sea-Doo PWCs andMovetrailers: the perfect match!
sea-doo move l with icatch and walk pad trailer 8 adjustable and non-marking rollers
Submersible lights
QUICK-SNAP RELEASE HANDLE
TORSION RUBBER SUSPENSION
SPARE WHEEL
icatch AUTOMATIC system
SPARE WHEEL SUPPORT
INNOVATIVE WALK PAD guidance system
marine jack
COUPLER STAND
When the occasion calls for easy handling, great performance and smart innovation, you can never go wrong with sea-doo move I iCATCH trailers. ©2011 Bombardier Recreational Products Inc., (BRP). All rights reserved. ™, ® and the BRP logo are trademarks of Bombardier Recreational Products Inc. or its affiliates. In the U.S.A., products are distributed by BRP US Inc. In Canada, products are distributed by Bombardier Recreational Products Inc. Because of our ongoing commitment to product quality and innovation, BRP reserves the right at anytime to discontinue or change specifications, price, design, features, models or equipment without incurring any obligation. 3M is a registered trademark of 3M. Printed in Canada.