SD SCR-4641USID

MANUAL DE INSTRUCCIONES CAR-AUDIO C/MP3 Y USB / SD SCR-4641USID ESTIMADO CLIENTE Con el fin de que obtenga el mayor desempeño de su producto, por fa...
3 downloads 0 Views 2MB Size
MANUAL DE INSTRUCCIONES

CAR-AUDIO C/MP3 Y USB / SD SCR-4641USID

ESTIMADO CLIENTE Con el fin de que obtenga el mayor desempeño de su producto, por favor lea este manual de instrucciones cuidadosamente antes de comenzar a utilizarlo, y guárdelo para su futura referencia. Si necesita soporte adicional, no dude en escribir a: [email protected]

ÍNDICE DESCRIPCIÓN .......................................................................................................................................... 2   FUNCIONES PRINCIPALES ..................................................................................................................... 3   OPERACIÓN GENERAL............................................................................................................................ 3   OPERACIÓN DEL RADIO ......................................................................................................................... 4   OPERACIÓN DE MP3 ............................................................................................................................... 4   INSTALACIÓN DE LA UNIDAD ................................................................................................................. 5   DIAGRAMA DE CABLEADO...................................................................................................................... 7   RESOLUCIÓN DE PROBLEMAS .............................................................................................................. 8   ESPECIFICACIONES ................................................................................................................................ 8   DIAGRAMA DE CIRCUITOS ..................................................................................................................... 9  

LÍNEAS DE SERVICIO AL CLIENTE PREMIER Venezuela: Panamá: Sitio Web: E-mail:

0800 – ELECTRIC (353-2874) 300-5185 www.premiermundo.com [email protected]

NOTA Nos reservamos el derecho de modificar las especificaciones, características y/u operación de este producto sin previo aviso, con el fin de continuar las mejoras y desarrollo del mismo.

P-1

DESCRIPCIÓN

1. ENCENDER / MODO Presione para encender o apagar la unidad. Presione este botón para cambiar entre las funciones de radio y MP3/WMA. (Radio, USB, SD, Auxiliar) 2. BANDA / APS En el modo de radio presione este botón para cambiar entre los modos FM1, FM2, FM3, AM1, AM2. Presione el botón APS (o AMS/S) para que la unidad busque las estaciones radiales con mayor potencia y las guarde automáticamente en los botones de memoria 1 a 6. 3-5. ANTERIOR Y SIGUIENTE En modo de radio, use estos botones para sintonizar la estación radial deseada. En modo MP3, Utilice estos botones para cambiar de pistas hacia adelante y hacia atrás. 4. VOLUMEN En el modo normal utilice este botón para aumentar y disminuir el volumen 6 SILENCIAR / RELOJ Presione para desactivar le sonido de la unidad, presione de nuevo para restablecer. En modo de reloj: Presione este botón para mostrar y ajustar la hora. 7. CH-/RPT/INT/RDM/CARPETA En modo de radio, presione este botón para retroceder a través de las estaciones radiales almacenadas. Pueden ser almacenadas 6 estaciones en cada banda. En modo MP3, presione para intercambiar entre las funciones: Repetir – Introducción – Reproducción aleatoria.

8. SELECCIÓN DE CONTROL Presione el botón varias veces para tener acceso a las siguientes funciones: volumen, graves, agudos, P-2

balance, desvanecedor, loud, ecualizador, DX, ST. 9. VOLUMEN Presione este botón para disminuir el nivel de volumen 10. RANURA USB Conecte un dispositivo USB para reproducir archivos MP3/WMA. 11. RANURA SD/MMC Conecte una tarjeta SD/MMC a esta ranura para reproducir canciones MP3/WMA. 12. PANTALLA LCD Muestra la hora y las funciones seleccionadas.

FUNCIONES PRINCIPALES • • • • • •

Soporte para USB, Tarjeta SD/MMC Soporte para formatos de audio: MP3/WMA Soporte para cargar un teléfono celular por medio de la ranura USB. La unidad solo soporta los sistemas de archivo FAT16 o FAT32. No formatee el archivo de sistema cuando esté dando formato a la USB o tarjeta SD/MMC. La unidad soporta dispositivos USB y Tarjetas SD/MMC con un tamaño máximo de 32GB.

OPERACIÓN GENERAL ENCENDER/APAGAR Presione el botón de encendido para encender la unidad y nuevamente para apagarla. CANCELAR SONIDO Presione el botón silenciador para cancelar el sonido; presione y mantenga para activarlo. MODOS • Conecte un dispositivo USB o tarjeta SD/MMC mientras la unidad esta en modo de radio. La unidad cambiará a modo de USB/SD/MMC. • Si la unidad tiene conectado un dispositivo USB, al conectar una tarjeta SD/MMC cambiará a modo SD/MMC. • De manera contraria, si la unidad tiene conectada una tarjeta SD/MMC, al conectar un dispositivo USB cambiará a modo USB. • La unidad volverá a modo de radio cuando se desconecten estos dispositivos. • Presione el botón Modo para cambiar de modo cuando un dispositivo USB o tarjeta SD/MMC esté conectado. El modo USB es el modo preestablecido al encender la unidad. HORA 1. Presione el botón Reloj para mostrar la hora en la unidad. La pantalla LCD regresará al modo normal después de 5 segundos. 2. Para cambiar la hora presione y mantenga el botón Reloj hasta que la hora parpadee en la pantalla. Luego utilice el botón de volumen +/- para ajustar la hora. Presione el botón de Selección para P-3

confirmar. Ahora ajuste los minutos de la misma manera. Para confirmar presione de nuevo el botón de Selección. MODO DE AUDIO • Utilice la perilla de volumen para aumentar y disminuir el nivel. • Presione el botón de selección de audio para ajustar las funciones volumen, graves, agudos, desvanecedor, loud, DX, ST. • Presione y mantenga el selector de audio para activar la función de ecualizador. (Nota: si la función de ecualizador esta activa, no se podrán configurar los graves y los agudos)

OPERACIÓN DEL RADIO BANDA • Presione el botón Banda para cambiar entre las opciones FM1, FM2, FM3, AM1, AM2. • Presione y mantenga el botón APS (o AMS/S) para que la radio busque las estaciones radiales más fuertes y las guarde en los números de memoria 1 a 6. • En el modo FM se pueden guardar 18 estaciones, 6 en cada modo FM. • En el modo AM se pueden guardar 12 estaciones, 6 en cada modo AM. • Cuando las estaciones radiales estén guardadas presione el botón numérico correspondiente. SINTONIZACIÓN Utilice los botones anterior y siguiente para moverse a través de las estaciones radiales. Presione y mantenga para avanzar rápidamente a través de las estaciones. Si desea guardar una estación radial presione y mantenga uno de los números 1 a 6.

OPERACIÓN DE MP3 • • • •

La unidad puede leer los archivos de música que se encuentren en un dispositivo USB y tarjeta SD/MMC al conectarse a la unidad. Cuando la unidad esté reproduciendo archivos desde el dispositivo USB, se observará el ícono USB en la pantalla, y cuando lo esté haciendo desde la tarjeta SD/MMC, se verá el ícono SD en pantalla. Cuando el tipo de archivo sea MP3, se verá el ícono MP3 en la pantalla. Si el tipo de archivo es WMA se verá el ícono de WMA en la pantalla. Utilice los botones anterior y siguiente para moverse a través de las pistas.

En el modo de reproducción de MP3 utilice los botones 1 a 6 de la siguiente manera: • • •

Presione el botón para pausar la reproducción y presiónelo de nuevo para reanudarla. Presione el botón para cambiar entre “Repetir – Introducción – Reproducción aleatoria” Presione y sostenga el botón para ir a la carpeta anterior



Presione y sostenga el botón

para ir a la siguiente carpeta

ETIQUETAS ID3 Si esta función está disponible, la pantalla mostrará la siguiente información: • Nombre de la canción y tipo de archivo • Título P-4

• Artista • Directorio O usted también puede hacer un escaneo sobre esta información presionando el botón Banda. En el modo MP3/WMA, presione el botón APS en el control remoto para activar el modo de búsqueda de pistas con los siguientes métodos: Utilice los botones numéricos para introducir un número (desde la unidad o el control remoto) o gire la perilla para seleccionar la pista que desee. Por ejemplo, usted está escuchando la primera canción y quiere ir a la 59. Presione el botón AMS/S o APS, y en la pantalla LCD aparecerá el mensaje “Búsqueda de Pista” (TRK SCH). Gire la perilla para seleccionar el número de 0 a 9. Seleccione entonces, en este ejemplo, el número 5. Espere tres segundos; la unidad irá al segundo dígito. Luego presione el número 9 o gire la perilla para seleccionar este número. Presione el botón de Selección para que la unidad vaya a la pista 59.

INSTALACIÓN DE LA UNIDAD La carcasa de la unidad tiene un diseño antirrobo para mayor seguridad. Tenga en cuenta las siguientes instrucciones de instalación. 1. Empuje la placa de montaje contra el chasis hasta que encaje. 2. Introduzca la unidad en el tablero y luego empuje la unidad hacia el chasis hasta que quede bloqueado. Nota Elija una ubicación donde la unidad no interfiera con la función normal de manejar. Antes de completar la instalación de la unidad conecte los cables temporalmente y asegúrese de que estén bien conectados y que la unidad funciona adecuadamente. Para una instalación segura utilice las piezas de montaje suministradas por el fabricante. RETIRAR LA UNIDAD Introduzca las llaves suministradas en las ranuras a ambos lados de la unidad hasta que hagan ‘clic’. Al halar las llaves se hace posible el retiro de la unidad del tablero.

P-5

Soporte Anillo Plano

Tuerca

Arnés Metálico

Unidad

Llaves de desmontaje

Marco Plástico

P-6

DIAGRAMA DE CABLEADO

CONEXIÓN DE CUATRO CANALES

antena del auto

naranja conector de antena

amarillo (fusible 5A) ignición batería

rojo (fusible 3A)

blanco

salida izquierda de audio

polo positivo cátodo de batería

negro

blanco + frontal

posterior

blanco negro -

salida derecha de audio

rojo

gris + gris negro -

PARLANTE IZQUIERDO

PARLANTE DERECHO

verde +

AZUL +

verde negro -

azul negro -

frontal

posterior

P-7

RESOLUCIÓN DE PROBLEMAS Esta lista es para ayudarle a resolver problemas simples que pueden presentarse en el uso del producto. Por favor léala y verifique estos puntos antes de solicitar ayuda de personal de servicio técnico autorizado. PROBLEMA La unidad no enciende

CAUSA Y SOLUCIÓN Verifique las conexiones de los cables y si el fusible se ha quemado No hay sonido Verifique las conexiones de los cables y que el volumen no esté al mínimo La radio no funciona al igual que la selección Verifique que la antena esté conectada y que el automática de estaciones lugar donde se encuentre tenga buena recepción de señal La unidad está encendida pero el reproductor no El formato de reproducción de los archivos es funciona diferente a MP3 o WMA.

ESPECIFICACIONES GENERAL Suministro de energía Conexión a Tierra Tamaño de la Instalación Peso Temperatura de Operación

12V DC Electrodo Negativo 178 x 120 x 50 mm 0.65 kg -20ºC - +60ºC

AUDIO Potencia de Salida Impedancia

4 x 7 Watts 4 Ohm – 8 Ohm

RADIO FM Rango de Frecuencia Sensitividad

87.5 – 108MHz 10dB (S/N30 dB) ≤ 15dB

RADIO AM Rango de Frecuencia Sensitividad

520 – 1710 KHz 30dB (S/N 20dB)

P-8

DIAGRAMA DE CIRCUITOS

P-9

P-10

INSTRUCTION MANUAL

CAR-AUDIO W/MP3 & USB / SD SCR-4641USID

DEAR CUSTOMER In order to achieve the best performance of your product, please read this instruction manual carefully before using, and keep it for future reference. If you need extra support, please write to [email protected]

PREMIER CUSTOMER SERVICE Venezuela: Panama: Website E-mail:

0800 – ELECTRIC (353-2874) 300-5185 www.premiermundo.com [email protected]

NOTE This unit may be submitted to changes in specifications, characteristics and/or operation without prior notice to the user, in order to continue improving and developing its technology.

P-1

Key Function: 1. Power / Mode Button Power control: Press to turn on. Press and hold to turn off. Mode control: Press to change between Radio function and MP3/WMA function. (Radio-USB-SD/MMC). The unit default is radio mode. 2. Band / APS Button Band control : In radio mode, press to change among FM1-FM2-FM3-AM1-AM2. APS control: In radio mode, press and hold to store the desired channel, each band can store 6 channels. In MP3 mode, press this button, then press the volume button to select any track with number : “0”,”1”,”2”,”3”,”4”,”5”,”6”,”7”,”8”,”9”. 3.

Button In radio mode, press to tune your desired channel. In MP3 mode, press to rewind to the previous track.

4. VOL + Button Press this button to increase the volume level. 5.

Button In radio mode, press to tune your desired channel. In MP3 mode, press to forward to the next track.

6. MUT / CLK Button Mute function: press to mute down the volume; press again to resume the volume level. CLK function: press to display and to adjust the time. 7. CH-/ RPT/INT/RDM/ Folder + In radio mode, press to rewind to stored channel. Totally 6 channels can be stored in each band. P-2

In MP3 mode, press to switch between “RPT-INT-RDM” Function. Press and hold to resume to the forward folder select function. 8. SEL control Button To access various sound parameters, press this button to cycle through the following adjustable settings: VOLUME > BASS > TREBLE > BALANCE > FADER > LOUD > EQ > DX > STEREO 9. VOL – Button Press this button to decrease the volume level. 10. USB Slot Insert any USB MP3 playback device into this slot for MP3/WMA song playback. 11. SD/MMC Slot Insert any SD/MMC card into this slot MP3/WMA song playback. 12. LCD Display Display the clock and other selected functions. Main Function: • Support USB & SD/MMC Card • Support Audio file format: MP3/WMA • Support Mobile charging with USB Slot This unit only supports FAT16 or FAT32 file system. Please do not format its file system when formatting the USB, SD/MMC card. This unit can supports the USB/SD/MMC Card with max. memory size of 32GB. Basic Control: 1. Power switch / Mode 1) Press PWR/MOD button to turn on the unit. Press and hold to turn off the unit. 2) When unit is on, press PWR/MOD Button to change the mode when USB/SD/MMC card is plugged in. USB mode is preset when switching on the unit. 3) Plug in USB/SD/MMC Card under radio mode, this unit will change to USB/SD/MMC card mode; 4) Plug in SD/MMC card under USB mode, this unit will change to SD/MMC card mode; 5) Plug in USB under SD/MMC card mode, this unit will change to USB mode. 6) This unit will change to radio mode when USB/SD/MMC card is removed. 2. Time display and setting 1) Time will be displayed after slightly press the CLK button. The LCD display will return back to its original display after 5 seconds. 2) Press and hold CLK button to set the time, time on the display will be blinking. Then slightly press the VOL+&VOL- button to set the hour. Press SEL to confirm the hour setting. P-3

3) Then press VOL+ & VOL- button to set the minute. To confirm the time setting, simply by pressing SEL button. 3. Mute function Press MUTE button to mute down the volume; press again to resume the previous volume level. 4. Audio mode selector 1) Press VOL + / VOL - to increase/decrease the volume level. 2) Press SEL button on the unit, “VOL, BAS, TRE, BAL, FAD, LOUD, EQ, DX, ST” on the display will be found on the display, then press the SEL button to switch between the audio mode, which is bass, treble, balance, fader, loud on/off, EQ, DX/LOC, stereo/mono. 3) To activate the EQ function from the unit, press SEL button selector until EQ is found on the display; then press the VOL+/VOL- button to select your desired EQ mode: “POP-CLASSROCK-EQ OFF”. Note: If EQ is on, unit will not be able to control BASS & TREBLE function. Radio Control 1. Band Control 1) Press BND button to select the band, repeatedly to cycle through 5 radio band: FM1 – FM2 – FM3 – AM1 – AM2 2) Hold and press APS button, the radio will scan up all the strongest station. 3) In FM mode, 18 stations can be stored from FM1-FM3 mode; In AM mode, 12 stations can be stored from AM1-AM2 mode. 2. Tuning Button Press to auto tune the desire radio station, press and hold the button again, manual tuning will be activated. It will resume to auto tuning automatically. To store the station, press and hold any 1-6 number button. MP3 Control 1. This unit can read the files which found in USB/SD/MMC card by plugging it into the slots. 2. When it is playing the tracks from USB, USB icon is found on the display. 3. When it is playing the tracks from SD/MMC card, SD icon is found on the display. 4. When the file type is MP3; then MP3 icon is found on the display. 5. When the file type is WMA; then WMA icon is found on the display. 6. Press fast forward to go to next track and press rewind backward to rewind to the previous track. 7. Press to switch between “RPT-INT-RDM” function. RPT: Press button to start the repeat function. Press again to activate the INT function. INT: Press button to listen the first 10 seconds of each song. Press again to activate the RDM function. RDM: Press button to play all the tracks randomly. Press again to cancel. 5. Press and hold button to rewind to previous folder. P-4

ID3 TAG 1. If The MP3/WMA file is available with ID3 TAG. The following information will be shown on LCD display automatically. ~ Song name with file type ~ Title ~ Artist ~ Directory Or you may have a quick scan about track information which you are playing by pressing BND button. 2. During MP3/WMA mode, press APS button to activate the track search mode, with below methods: ~ Press the volume button to select the desired track. For example, you are now playing the first song and you want to swift to track 59, press APS button, “TRK SCH” will be found on the LCD display, Then press the vol+ or vol- to select from the number “0”,”1”,”2”,”3”,”4”,”5”,”6”,”7”,”8”,”9” to select “5”; so that the first digit “5” will be found on LCD Display. Then wait for 3 seconds, it will move to the second digit automatically; then again press the volume button, then the second digit “9” will be found on the LCD Display. To confirm your selection, press “SEL” button. ~ You may always cancel your track selection by pressing APS button. Installation The unit has anti theft locked box design, please follow the below installation instruction: 1. Push the trim plate against the chassis until it is fitted. 2. Insert the unit into the dashboard then push the unit into the metal chassis until it is locked. Attention: 1. Choose the mounting location where the unit will not interface with the normal driving function of the driver. 2. Before completing the unit installation, connect the wiring temporality and make sure it is all connected up properly and the unit and system work properly. 3. For safe installing, use the mounting hardware provided by the manufacturer. Removal: Insert the levers supplied with the unit into the grooves at both sides of the unit until they click. Pulling the levers makes it possible to remove the unit from the dashboard. DISASSEMBLY AND ASSEMBLY INSTRUCTIONS Assembly instructions Connect the unit harness with lock and push them together inside, insert the unit harness into instrument panel, and push the player into the metal harness until it is locked. P-5

If the assemble angle is above 30, the unit may not work properly. The installation place should not affect the driver’s normal operations or injure the passengers when the car is braked suddenly. Disassembly instructions Take the plastic frame off, and insert the keys into the holes in the face panel, then pull the keys hard to take player out of the instrument panel.

Trouble Shooting Symptom No Power

Cause Solution Speaker cable is disconnected. Check to see that all the power Poor power connection. and speaker leads are securely connected. The fuse is burnt out. Replace the fuse. No Sound Volume is set to the minimum. Adjust volume to a desired level. Wiring is not proper. Check wiring connection. The radio doesn’t work, and the The antenna cable is not Select the station in manual radio station automatic selections connected, or the signal is too mode. Insert the antenna cable do not work. weak. firmly. The player is on, but it doesn’t The file format is not MP3/WMA Make sure the songs you store in play any track. format. the USB or SD card are MP3/WMA format.

P-6

Specifications Power – 12V DC Ground System – Negative Electrode Maximum Current – 5A (MAX) Installation Size (L*W*H) – 178 X 120 X 50mm Weight – 0.65 kg Working Temperature - -20C ~ +60C Audio High Power Output – 4x7 Watts Speaker impedance – 4 Ohms ~ 8 Ohms FM Tuning Frequency Range – 87.5 – 108 MHZ Usable Sensitivity – 10dB (S/N 30 dB)

15 dB

AM Tuning Frequency Range – 520 – 1710 KHZ Usable Sensitivity – 30dB (S/N 20DB)

P-7

P-8

P-9