Satloc G4 Connectivity Kit Quick Start Guide

Satloc G4 Connectivity Kit Quick Start Guide Thank you for your purchase of Satloc® G4™. This connectivity kit quick start guide provides the followi...
13 downloads 3 Views 3MB Size
Satloc G4 Connectivity Kit Quick Start Guide

Thank you for your purchase of Satloc® G4™. This connectivity kit quick start guide provides the following information: •

Parts included in your kit (detailed in the table starting on the following page)



Basic connection diagram



Steps for establishing a cell modem or wifi connection



Contact and Technical Support information (see bottom of this page)

Please read this guide thoroughly before setting up your connectivity kit.

Obtaining Help for Satloc G4 Contact your local dealer for technical assistance. To find the authorized dealer near you: Satloc 2207 Iowa Street Hiawatha, KS 66434 Phone: 785-742-2976 Fax: 785-742-4584 [email protected] www.satloc.com

Enter your dealer information here for quick reference: Name:

_______________________________________________

Phone:

_______________________________________________

Email:

_______________________________________________

If you need to contact Satloc G4 Technical Support: Satloc 2207 Iowa Street Hiawatha, KS 66434 Phone: 785-742-2976 Fax: 785-742-4584 [email protected]

Satloc G4 Connectivity Kit Quick Start Guide

1

875-0330-000 Rev A1

Parts Included in Your Satloc G4 Connectivity Kit Unpack your Satloc G4 connectivity kit and identify the parts as shown. Part Number

Qty

Description

150-0027-000

1

Antenna, outdoor directional, 14 dBi

750-1111-000

1

Wireless USB network adapter

750-1112-000

1

Wireless router, 150N

750-1113-000

1

Audio adapter, USB, SoundWave 7.1

750-1114-000

1

USB modem, Verizon, 4G Pantech

Satloc G4 Connectivity Kit Quick Start Guide

Photograph

2

875-0330-000 Rev A1

Part Number

Qty

Description

Photograph

750-1115-000

1

Microsoft LifeCam

050-0068-000

1

Extension cable, low loss, outdoor, N-Plug, 30 ft

Parts Included in Your USB Hub Kit Unpack your Satloc G4 USB Hub kit and identify the parts as shown. Part Number

Qty

Description

805-0012-000

1

Assembly, USB hub

054-0142-000

1

Cable, USB power, USB hub

Satloc G4 Connectivity Kit Quick Start Guide

Photograph

3

875-0330-000 Rev A1

Connection Diagram Cell Modem Setup

Wifi Setup

Assembly, USB hub (PN 805-0012-000)

Assembly, USB hub (PN 805-0012-000) Assembly, USB hub (PN 805-0012-000)

Audio adapter, USB, SoundWave 7.1 (PN 750-1113-000)

Assembly, USB hub (PN 805-0012-000)

Audio adapter, USB, SoundWave 7.1 (PN 750-1113-000)

Microsoft LifeCam (PN 750-1115-000)

Microsoft LifeCam (PN 750-1115-000) Wireless USB network adapter (PN 750-1111-000)

USB modem, Verizon, 4G Pantech (PN 750-1114-000)

Wifi connection

Antenna, outdoor directional, 14 dBi (PN 150-0027-000)

Note: The audio adapter and webcam are included in the G4 kit but are not required for cell modem or WiFi connectivity.

Extension cable, low loss, outdoor, N-Plug, 30 ft (PN 050-0068-000)

Wireless router, 150N (PN 750-1112-000) Building (such as a hangar)

Satloc G4 Connectivity Kit Quick Start Guide

4

875-0330-000 Rev A1

Establishing a Connection After powering up your system, you need to establish a wireless (wifi) or modem connection, depending on your setup.

Establishing a Wifi Connection 1.

With your system powered up and on the G4 display, double-tap IStarLaunchG4. On the Warning window that appears press OK. The IStarLaunch G4 window appears.

2.

Press RETURN to Windows Desktop.

3.

On the desktop, press the Network icon in the notification area to display the Connections panel.

Press the Network icon to display the Connections panel

If the wifi adapter is not plugged in the Network icon shows as Not connected.

Satloc G4 Connectivity Kit Quick Start Guide

5

875-0330-000 Rev A1

4.

On the Connections panel press the desired WiFi connection and then press Connect. The Connect to a Network security window appears.

5.

Press the Security key text box. A virtual keyboard icon appears. Press the virtual keyboard icon to display a full size virtual keyboard.

Press the text box to display the keyboard icon here. Then press the keyboard icon to display the full size keyboard at the top of the window.

6.

Type the security key and press OK in the Connect to a Network window. When the connection is complete the Network icon in the notification area shows as connected.

7.

On the desktop double-tap IStarLaunchG4. On the Warning window that appears press OK and then proceed as normal to use IntelliTrac. When you arrive at the Map screen a message window appears, indicating an internet connection has been detected. Press Accept to continue.

Satloc G4 Connectivity Kit Quick Start Guide

6

875-0330-000 Rev A1

Establishing a Modem Connection 1.

With your system powered up and on the G4 display, double-tap IStarLaunchG4. On the Warning window that appears press OK. The IStarLaunch G4 window appears.

2.

Press RETURN to Windows Desktop.

3.

On the desktop, double-tap VZAccess Manager. The VZAccess Manager window appears.

VZAccess Manager should recognize a cell modem is connected (Signal bars are green, device is indicated as Ready, and the Connect button is green). 4.

Press Connect. Once connected the Status displays ‘Connected’ and the Connect button changes to a red background with the text ‘Disconnect.’

5.

Press the Minimize button on the VZAccess Manager window.

6.

On the desktop double-tap IStarLaunchG4. On the Warning window that appears press OK and then proceed as normal to use IntelliTrac. When you arrive at the Map screen a message window appears, indicating an internet connection has been detected. Press Accept to continue.

Satloc G4 Connectivity Kit Quick Start Guide

7

875-0330-000 Rev A1