SAFETY DATA SHEET Polyethylene Terephthalate or PET Flakes

Clear Path Recycling LLC 3500 Cedar Creek Road Fayetteville, NC 28312 910-433-8372 SAFETY DATA SHEET Polyethylene Terephthalate or PET Flakes 1. CHE...
Author: Chrystal Hicks
54 downloads 2 Views 266KB Size
Clear Path Recycling LLC 3500 Cedar Creek Road Fayetteville, NC 28312 910-433-8372

SAFETY DATA SHEET Polyethylene Terephthalate or PET Flakes 1.

CHEMICAL PRODUCT/COMPANY IDENTIFICATION

PRODUCT IDENTIFIER: Polyethylene Terephthalate or PET Flakes RECOMMENDED USE AND USE RESTRICTIONS: Polymer for plastics industry. See attached “Clear Path Recycling Caution Bulletin No. 1”, at end of SDS for use restrictions. MANUFACTURER / SUPPLIER: Clear Path Recycling LLC 3500 Cedar Creek Road Fayetteville, NC 28312 www.clearpathrecycling.com EMERGENCY PHONE NUMBERS: Product Information: Transport Emergency: CHEMTREC

1-800-227-6335 1-800-424-9300

2. HAZARDS IDENTIFICATION OSHA HAZARD CLASSIFICATION: COMBUSTIBLE DUST - WARNING! MAY FORM COMBUSTIBLE DUST CONCENTRATIONS IN AIR. HAZARDS NOT OTHERWISE CLASSIFIED:  CAUTION! MOLTEN MATERIAL WILL PRODUCE THERMAL BURNS. Molten polymer will adhere to skin and can cause severe burns.  Eye contact with polymer particles may cause mechanical irritation with discomfort, tearing, or blurring of vision. 3. COMPOSITION/INFORMATION ON INGREDIENTS COMPONENTS: Material CAS Number Polyethylene Terephthalate 25038-59-9 Fillers -

% >99 10,000 mg/kg in rats CARCINOGENICITY INFORMATION: None of the components present in this material at concentrations equal to or greater than 0.1% are listed by NTP, IARC, OSHA or ACGIH as a carcinogen. 12. ECOLOGICAL INFORMATION No toxicity data is available. The product is insoluble in water. 13. DISPOSAL CONSIDERATIONS Treatment, storage, transportation, and disposal must be in accordance with applicable Federal, State/Provincial, and Local regulations. 14. TRANSPORTATION INFORMATION SHIPPING INFORMATION:  DOT - Class Not Regulated.  Sea – IMDG (International Maritime Dangerous Goods) – Class Not Regulated.  Air – ICAO (International Civil Aviation Organization) – Class Not Regulated. 15. REGULATORY INFORMATION U.S. FEDERAL REGULATIONS:  TSCA Inventory Status: In compliance with TSCA Inventory requirements for commercial purposes.  Under RCRA, it is the responsibility of the product user to determine at the time of disposal whether a material containing the product or derived from the product should be classified as a hazardous waste (40 CFR 261.20-24).  If discarded in its purchased form, this product does not meet the RCRA characteristic definition for ignitability, corrosivity or reactivity and is not a RCRA listed waste; however, it has not been tested by the Toxicity Characteristic Leaching Procedure (TCLP).  SARA, Title III: This material is not known to contain extremely hazardous substances.

SDS Number: CP0004

Page 5 of 7

Clear Path Recycling LLC 3500 Cedar Creek Road Fayetteville, NC 28312 910-433-8372

INTERNATIONAL REGULATIONS:  DSL (Canadian Domestic Substances List) and CEPA (Canadian Environmental Protection Act): This product is listed on the DSL or otherwise complies with CEPA new substance notification requirements.  No components of this product are on the Mexican Raw Materials Regulation. 16. ADDITIONAL INFORMATION The data in this Safety Data Sheet relates only to the specific material designated herein and does not relate to use in combination with any other material or in any process. SDS Revision Date: April 27, 2015 End of SDS

SDS Number: CP0004

Page 6 of 7

Clear Path Recycling LLC 3500 Cedar Creek Road Fayetteville, NC 28312 910-433-8372

CLEAR PATH RECYCLING CAUTION BULLETIN NO.1 DO NOT USE CLEAR PATH MATERIALS IN MEDICAL APPLICATIONS INVOLVING PERMANENT, BRIEF, OR TEMPORARY IMPLANTATION IN THE HUMAN BODY OR PERMANENT CONTACT WITH INTERNAL BODY FLUIDS OR TISSUES, UNLESS THE MATERIAL HAS BEEN PROVIDED DIRECTLY FROM CLEAR PATH UNDER A CONTRACT WHICH EXPRESSLY ACKNOWLEDGES THE CONTEMPLATED USE. CLEAR PATH MAKES NO REPRESENTATION, PROMISE, EXPRESS WARRANTY OR IMPLIED WARRANTY CONCERNING THE SUITABILITY OF THESE MATERIALS FOR USE IN THE HUMAN BODY OR IN CONTACT WITH INTERNAL BODY FLUIDS OR TISSUES. THE CONTENT OF CLEAR PATH MATERIAL IS NOT CERTIFIED FOR IMPLANTS. Clear Path materials are not designed or manufactured for use in implantation in the human body or in contact with internal body fluids or tissues. Clear Path has not performed clinical testing of these materials for implantation. Clear Path will not provide to customers making implantable devices any notice concerning its materials, as specified under 21 CFR section 820.50, or any other information necessary for medical device use of the materials under any other statue or FDA regulation. Clear Path has neither sought, nor received, approval from the FDA for the use of these materials in implantation in the human body or in contact with internal body fluids or tissues. ALL IMPLANTABLE MEDICAL DEVICES CARRY A RISK OF FAILURE AND ADVERSE CONSEQUENCES. The medical judgment of a physician, a medical device seller and the FDA should be relied upon for identification of both harmful consequences and life-saving benefits from an implantation device comprised of specific materials. These benefits and risks can be found in published medical cases performing clinical medical studies of an implantable medical device. Clear Path does not support the use of its products in these applications and cannot weigh the benefits against the risk defined in these articles. Clear Path cannot offer a medical judgment on the safety or efficacy of the use of its materials in such devices. DO NOT MAKE REFERENCE TO THE CLEAR PATH NAME OR ANY CLEAR PATH TRADEMARK IN ASSOCIATION WITH AN IMPLANTABLE MEDICAL DEVICE. End of Bulletin

SDS Number: CP0004

Page 7 of 7