Rod Ends and Spherical Plain Bearings

Rod Ends and Spherical Plain Bearings FLURO-Gelenklager GmbH Introduction Rod Ends and Spherical Plain Bearings are assembled machine parts to DIN ...
4 downloads 2 Views 5MB Size
Rod Ends and Spherical Plain Bearings

FLURO-Gelenklager GmbH

Introduction Rod Ends and Spherical Plain Bearings are assembled machine parts to DIN ISO 12240 (former DIN 648), ready for installation. They are used to guarantee the unproblematic movement between shaft and housing, especially where the movement is not directly linear. The FLURO® production program consists of Spherical Plain Bearings in all Series (DIN ISO 12240-1) and Rod Ends Series K and E (DIN ISO 12240-4), as well as Hydraulic Rod Ends with weld-on surface or female thread fixable with hexagon socket head cap screws. As new products in this catalogue are Thrust Bearings and Angular Contact Spherical Plain Bearings. To supplement the product range Angle Joints, Fork Heads, Locking Nuts and Rubber Seals have been added. Where bearings with standard dimensions cannot be used, parts to customer designs are manufactured. Alternatively we can develop solutions for special applications. A small selection of these parts may be seen on the last pages of this catalogue. Our premium trained engineering and quality guarantee staff is pleased to offer advise on any application demand. With high standard machinery we are able to turn, grind and mill parts with the highest precision. A list of our machining capabilities is available on request. We have been approved for quality assurance to DIN EN ISO 9001 since June 1997. Our sales staff is happy to assist you with any inquiry.

Just recently our industrial unit was enlarged and modernized. This meant advanced improvements to our logistics and an enlarged stock of products for faster delivery response.

2

FLURO-Gelenklager GmbH

Contents General Introduction Contents Production Program Motor Sport Series Ordering Details

2 3 4 8 9

Technical Data Thread, Pivoting Angle Fit, Installation Internal Clearance Lubrication, Temperature, Material Technical Information Calculation Examples

10 11 12 13 14 18

Rod Ends Series K Standard GI/GA 20 Heavy Duty GIS/GAS 22 Extra Heavy Duty GIXS/GAXS 24 Heavy Duty Stainless Steel GIRS/GARS 26 Heavy Duty Maintenance Free GISW/GASW 28 ditto Extra Heavy Duty GIXSW/GAXSW 30 Heavy Duty Stainless Steel GIRSW/GARSW 32 Steel on Steel GIO/GAO 34 Steel/PTFE GIOW/GAOW 36 Rod Ends with Seals 38 ditto with Threaded Bolt 39 ditto for Pneumatic Cylinders 40 Spherical Plain Bearings Series K Standard GL 41 Heavy Duty GLXS 42 ditto Stainless Steel GLRS 43 Maintenance Free GLXSW 44 ditto Stainless Steel GLRSW 45 without Outer Ring, regreasable GXS 46 without Outer Ring, Maintenance Free GXSW 47 Rod Ends Series E Steel on Steel EI/EA 50 Maintenance Free EI..D/EA..D 52 ditto Stainless Steel EI..D-NIRO/EA..D-NIRO 54 Spherical Plain Bearings Series E Maintenance Free GE...EC (2RS) ditto Stainless Steel GE...EC-NIRO Steel on Steel GE...E (-2RS) Steel on Steel GE...HO-2RS

48 49 56 57

Spherical Plain Bearings Series W Steel on Steel GE...LO

58

Spherical Plain Bearings Series G Steel on Steel GE...FO (-2RS) Maintenance Free GE...FW (-2RS)

59 60

Angular Contact Spherical Plain Bearings Steel on Steel GE...SX 61 Maintenance Free GE...SW 62 Spherical Plain Thrust Bearings Steel on Steel GE...AX Maintenance Free GE...AW

63 64

Rod Ends - Hydraulic with Locking Device FPR...S ditto for Pneumatic Cylinder FPR...CE short thread FPR...N ditto with Locking Device FPR...U Heavy Duty with Locking Device FMA...D with Weld-on Surface FS...C with Weld-on Surface FS...N

65 66 67 68 69 70 71

Angle Joints Angle Joints to DIN 71802

72

Fork Heads Fork Heads to DIN 71751 and DIN 71752

73

Rubber Seals Rubber Protector Cap RERS Washer Seals RELS

74 74

Locking Nuts Locking Nuts to DIN 934 / ISO 4032 Locking Nuts to DIN 439 / 936

75 75

Specials Parts for Marine / Food Processing and 76 Chemical application Precision Parts Martin Höhn GmbH 77 Inquiry Template Special Parts 78 Specialties 79 How you can find us 80

r

DIN EN ISO 9001:2000 Z.-Reg.-Nr. 12 100 19654 TMS

Catalogue Edition 2015

Every care has been taken to ensure the accuracy of the information in this catalogue. However no liability can be accepted for any errors or omissions. Due to continuing technical advances we reserve the right to alter our products without notice.

flu . ww

e

d o.

w

FLURO-Gelenklager GmbH

3

Production Range Series K

GI..

GA..

GL..

maintenance free

Heavy Duty regreasable

GXSW..

maintenance free

GAOW..

GIOW..

Heavy Duty without Outer Ring regreasable

Steel on Steel

GXS..

Steel on Steel

GAO..

GIO..

Heavy Duty maintenance free

Heavy Duty maintenance free

Heavy Duty maintenance free

GLXSW.. GLRSW..

FLURO-Gelenklager GmbH

Heavy Duty without Outer Ring maintenance free

Heavy Duty regreasable

GASW.. GAXSW.. GARSW..

GISW.. GIXSW.. GIRSW..

4

GLXS.. GLRS..

Heavy Duty regreasable

GAS.. GAXS.. GARS..

GIS.. GIXS.. GIRS..

Standard regreasable

Spherical Plain Bearings DIN ISO 12240-1 Series K with / without outer ring

Standard regreasable

Rod Ends DIN ISO 12240-4 Series K Male Thread

Standard regreasable

Rod Ends DIN ISO 12240-4 Series K Female Thread

Production Range Series E

EI..

EA..

GE..E

Stainless Steel

maintenance free

GE..ECNIRO

Stainless Steel

EA..DNIRO

EI..DNIRO

Stainless Steel

maintenance free

GE..EC

maintenance free

EA..D

EI..D

Steel on Steel

Spherical Plain Bearings DIN ISO 12240-1 Series E

Steel on Steel

Rod Ends DIN ISO 12240-4 Series E Male Thread

Steel on Steel

Rod Ends DIN ISO 12240-4 Series E Female Thread

Eccentric Rod End with self-aligning roller bearing

FLURO-Gelenklager GmbH

5

FPR..N

6

GE..FO (-2RS)

FLURO-Gelenklager GmbH

Steel on Steel Thrust Bearing

GE..LO

maintenance free Thrust Bearing

maintenance free Angular Contact Bearing

Steel on Steel Angular Contact Bearing

circular Weld-on Surface Bearing fixed through caulking

GE..HO -2RS Steel on Steel Ball with Shoulder

FS..C

Steel on Steel Ball with Shoulder

Hydraulic Rod Ends Steel on Steel

Steel on Steel, Heavy Duty, higher Pivtoing angle

FMA..D Rod End with Locking Device Bearing with Snap Ring

FPR..CE Rod End with Locking Device Bearing fixed through caulking

FPR..S FS..N

Rod End with Locking Device Rod End with Locking Device Bearing with Snap Ring Bearing with Snap Ring

FPR..U

Rod End with shorter thread Bearing with Snap Ring

Hydraulic Rod Ends + Spherical Plain Bearings Steel on Steel Spherical Plain Bearings

GE..FW (-2RS) maintenance free, Heavy Duty, higher Pivoting Angle

rectangular Weld-on Surface Bearing with Snap Ring

Production Range

GE...SX

GE..SW

GE..AX

GX..AW

Custom made products

Hydraulic Rod Ends designed and intended for marine, harbor and river engineering or lock gates. Completely stainless steel to customer design with maintenance free or regreasable Spherical Plain Bearing. Design and development according to customer requirements.

Connecting rod for highest pressure and tension loads, employed in automotive applications. These parts are supplied completely mounted with required axial distance and torque.

FLURO-Gelenklager GmbH

7

FLURO® Motor Sport Series Fluro® developed a series for Motor Sport applications:

Motor Sport - MS Series GAXSW..MS / GIXSW..MS from size 6mm to 25mm, with male or female thread and in fine thread versions. Maintenance free with a tight fit around the Ball. Design: - Housing: Heat-treated steel to 42CrMo4, AISI 4140, nickel plated high polish finish - Insert: Stainless steel to 1.4571, AISI 316Ti with PTFE liner bonded to the inner surface - Ball: Bearing steel to 100Cr6, AISI 52100 hardened and hard chrome plated - Zero tolerance through preloaded bearing

lu

e siv

Exc

S tor

Mo

a

tC r o p

on

ue

g talo

st e u q

re

!

Motor Sport - MS Series GXSW..MS / GLRSW..MS from size 6mm to 25mm. Maintenance free with a tight fit around the Ball. Design: - Outer Ring (Series GLRSW..MS): Stainless steel to 1.4305, AISI 303 - Insert: Stainless steel to 1.4571, AISI 316Ti with PTFE liner bonded to the inner surface - Ball: Bearing steel to 100Cr6, AISI 52100, hardened and hard chrome plated - Zero tolerance through preloaded bearing

Imperial measurements Rod Ends and Spherical Plain Bearings in imperial measurements - maintenance free - with lubrication fittings - specials on request

8

FLURO-Gelenklager GmbH

Ordering Details On pages 4 to 6 we have given full details of our standard range of products. Additional notes to make sure details are correct when placing orders are listed below; additions to and deviations from our standard program are listed, as well. Female Thread: The letter I is situated in the second place in the reference e.g. GI or EI Male Thread: The letter A is situated in the second place in the reference e.g. GA or EA Left Hand Thread: The letter L is situated in the third place in the reference e.g. GAL or EAL Non-Standard Thread: Bearing reference with additional thread specification e.g. GISW 30, M 27x2 Stainless Steel Ball: The letter R will be added after size reference e.g. GIRSW 10 R, GXSW 10 R, stainless version (stainless type see pages 26, 27, 32, 33, 43, 45) Completely Stainless The letters RR will be added after size reference (Series K): e.g. GARSW 16 RR, GXSW 16 RR (all items in stainless steel)

Completely Stainless The letters NIRO will be added after size reference (Series E): e.g. GE 10 EC-NIRO or EI 16 D-NIRO

Ball Hard Chrome Plated: ICR will be added after size reference e.g. GASW 10 ICR Seal: -2RS will be added after size reference e.g. GISW 10-2RS (see pages 38) Threaded Bolt: Bo will be added after size reference e.g. GISW 10 Bo (for right angle use, see page 39) Nickel Plated Housing: NI will be added after size reference e.g. GISW 14 NI (improved corrosion resistance for the housing) for series on pages 22 to 25, 28 to 31 Special Grease Nipples: SN will be added after size reference e.g. GAS 16 SN DIN 71412 H1/A M6x1 (exact name of grease nipple has to be specified)

Left Hand Thread for The letter L will be added at the third place replacing the letter R Hydraulic Rod Ends: e.g. FPL...N, except for series FMA...D = FMAL...D

For sizes deviating from the standard or for specials, please send us your drawing or sketch – see template on page 78. The maintenance instructions, selection criteria, tolerances and calculations as shown in the following technical section are intended to be an important guideline for the choice of the correct bearing to suit the particular application of our Rod Ends and Spherical Plain Bearings.

FLURO-Gelenklager GmbH

9

Thread, Pivoting Angle Threads Manufactured to standard metric ISO DIN 13 threads. To increase the stability for all standard Rod Ends with male threads, the threads are rolled. Maximum Pivoting Angle The permissible maximum Pivoting Angle (see picture 3, page 15) ranges between 6° and 35° depending on the series and constructional design.

Rod Ends and Spherical Plain Bearings Series K Pivoting angle

Size

Pivoting angle

2

16°

18

15°

3-4

14°

20

14°

5-6

13°

22-25

8

14°

30

17°

10-12

13°

35

19°

14

16°

40

16°

16

15°

50

14°

Size

8

8

15°

These figures are standard values as indicated in situation 2. Other constructional designs and its calculation examples are indicated in situations 1 and 3. 14

8

24

14

24

14

Situation 1  = sin-1

Situation 2

B -sin-1 M A A

 = sin-1

B - sin-1 M dK dK

24

A = B = dK = M = D =

10

Outside diameter Rod End/Spherical Plain Bearing Width Ball diameter Ball Width Rod End/Spherical Plain Bearing diameter Bore Ball

FLURO-Gelenklager GmbH

Situation 3  = cos-1

D -sin-1 M dK dK

Fit, Installation Recommended fits for the housing's bore to incorporate Spherical Plain Bearings Design

Steel Housing Series K

Light Alloy Housing Steel Series E Series K

Light Alloy Housing Series E

normal



Load

maintenance K7 M7 K7 M7 free regreasable J7/H7

K7

K7

M7

high

maintenance M7 N7 M7 N7 free

regreasable K7

M7

M7

N7

The outside diameter of the Spherical Plain Bearings, Series K is tolerated to h6. For Series E, please refer to each individual product page. Recommended fit for the shaft

normal

Series W GE..LO

h6 g6 g6 h6

k6

Load

Series E Series G GE..E (-2RS) GE::FO (-2RS) GE..EC (-2RS) GE..FW (-2RS) GE..EC-Niro GE..HO-2RS

high

Design Series K



j6/h6

j6/h6

j6

The bore diameter of the ball of Spherical Plain Bearings, Series K is tolerated to H7. For Series E, G and W, please refer to each individual product page.

Installation instructions: Attention: No tolerance or play can be allowed for the shaft when incorporated in the Ball or the Outer Ring when incorporated in a housing. Through this it is guaranteed that the glide movement arises on the nodular gliding surface only. When mounting extra precaution has to be taken that the press force does not damage the bearing. The press force should not be initiated via the bearing itself. Thermal installation will reduce the necessary press force. Axial locking of Spherical Plain Bearings: When under high static or dynamic axial load, vibration, impacting load changes or high pivoting angles Spherical Plain Bearings have to be locked axially. Possible locking methods: - locking through several puncher points - caulking of bearing on the housing through a flanging groove - with locking snap rings - clamped with bushings on the facing surface of the Insert

FLURO-Gelenklager GmbH

11

Internal Clearance Internal Clearance is defined as the radial and axial movement of the ball in the housing or outer ring. Internal Clearance is measured in the non-lubricated state. The radial clearances listed in the table below have been established with a load of 100N. Series K Type Size

Radial Internal Clearance in mm (min./max.)

Series E, G, W Type Size

Radial Internal Clearance in mm (min./max.)

GI/GA; GIS/GAS; GIXS/GAXS; GIRS/GARS

02 - 10 12 - 20 22 - 40

0,005 - 0,035 0,010 - 0,040 0,010 - 0,050

GISW/GASW; GIXSW/GAXSW; GIRSW/GARSW

05 12 20 30 -

10 18 25 40

0,005 - 0,030 0,005 - 0,035 0,005 - 0,045 0,005 - 0,055

GIOW/GAOW

04 - 10 12 - 20

0,005 - 0,040 0,005 - 0,050

GE...E (-2RS) GE...HO-2RS GE...LO

04 - 12 15 - 20 25 - 35 40 - 60 70 - 90 100 - 140 160 - 240 260 - 300 320 - 320

0,032 - 0,068 0,040 - 0,082 0,050 - 0,100 0,060 - 0,120 0,072 - 0,142 0,085 - 0,165 0,100 - 0,192 0,110 - 0,214 0,135 - 0,261

GIO/GAO

05 - 10 12 - 20

0,010 - 0,050 0,010 - 0,060

GL; GLXS; GLRS; GXS

02 12 20 30 40 -

10 18 25 40 50

0,005 - 0,040 0,005 - 0,050 0,010 - 0,060 0,010 - 0,075 0,015 - 0,095

GE...EC (-2RS)

04 - 20 25 - 35 40 - 60 70 - 90 100 - 140 160 - 180 200 - 300

0,000 - 0,040 0,000 - 0,050 0,000 - 0,060 0,000 - 0,072 0,050 - 0,130 0,050 - 0,140 0,080 - 0,190

GLXSW; GXSW; GLRSW

03 12 20 30 40 -

10 18 25 40 50

0,005 - 0,035 0,005 - 0,040 0,005 - 0,050 0,010 - 0,060 0,010 - 0,075

GE...FO (-2RS)

04 - 10 12 - 17 20 - 30 35 - 50 60 - 80 90 - 120 140 - 160 180 - 220 240 - 280

0,032 - 0,068 0,040 - 0,082 0,050 - 0,100 0,060 - 0,120 0,072 - 0,142 0,085 - 0,165 0,100 - 0,192 0,100 - 0,192 0,110 - 0,214

GE...FW (-2RS)

04 - 30 35 - 50 60 - 80 90 - 120 140 - 160 260 - 280

0,000 - 0,050 0,000 - 0,060 0,000 - 0,072 0,050 - 0,130 0,050 - 0,140 0,080 - 0,190

Series E Type Size

Radial Internal Clearance in mm (min./max.)

EI/EA

06 15 25 40 70 -

12 20 35 60 80

0,015 - 0,050 0,020 - 0,065 0,030 - 0,085 0,035 - 0,100 0,045 - 0,120

EI..D/EA..D EI..D-NIRO EA..D-NIRO

06 15 25 40 70 -

12 20 35 60 80

0,000 - 0,030 0,000 - 0,040 0,000 - 0,050 0,000 - 0,055 0,000 - 0,060

06 - 12 15 - 20 25 - 35 40 - 60 70 - 90 100 - 120 140 - 160

0,000 - 0,032 0,000 - 0,040 0,000 - 0,050 0,000 - 0,060 0,000 - 0,072 0,000 - 0,085 0,000 - 0,100

GE...EC-NIRO

Series Hydraulic Size

Radial Internal Clearance in mm (min./max.)

FPR...S FPR...CE FPR...N FPR...U FMA...D FS...C FS...N

0,023 - 0,068 0,030 - 0,082 0,037 - 0,100 0,043 - 0,120 0,055 - 0,142 0,065 - 0,165 0,065 - 0,192

10 - 12 15 - 20 25 - 35 40 - 60 63 - 90 100 - 125 160 - 200

For special applications Rod Ends and Spherical Plain Bearings are manufactured with smaller or higher internal clearance. C2 is smaller (tighter fit) than given above and C3 is higher (increased internal clearance) than given above.

12

FLURO-Gelenklager GmbH

Lubrication

Temperature

Material

Lubrication Maintenance Free Rod Ends and Spherical Plain Bearings must not be lubricated. The ball revolves on a PTFE liner incorporated in the housing. Rod Ends with Steel running on special Brass, or with Steel running on Bronze, and Steel on Steel require regular lubrication. The first time lubrication has to be carried out when the part is mounted. The regreasing interval depends on the impacting influences, such as ambient conditions (temperature, dust, etc.) and the mechanical impacts given through the application (surface pressure, number of alternation stress, pivoting angle, gliding speed, etc.). For the lubrication of Spherical Plain Bearings up to a temperature of +110° Celsius, (+230° Fahrenheit) white paste, such as Gleitmo 805k, is recommended. For higher temperatures from +110° to +220° Celsius, (+230° to +428°) Fahrenheit we recommend high temperature grease, such as Notropeen EHT2. Regreaseable Rod Ends Series K are lubricated by means of a grease nipple to DIN 3405. For Steel on Steel Rod Ends Series E from size 20 hydraulic grease nipples to DIN 71412 are incorporated. Temperature range FLURO® Rod Ends and Spherical Plain Bearings can be operated within the operating temperatures listed below:

Mating surface

Steel/Special Brass Steel/Bronze Steel/PTFE liner Steel/PTFE Glass fibre liner Steel/Steel GE...EC, FW, AW, SW GE...-2RS GE...EC-NIRO PTFE/hard chrome



Temperature Celsius

Temperature Fahrenheit

– 50° to +200° – 50° to +250° –150° to +250° – 75° to +150° – 50° to +200° – 50° to +150° – 30° to +130° –150° to +250° – 50° to +150°

– 58° to +392° – 58° to +480° –238° to +480° –103° to +302° –103° to +392° – 58° to +302° – 22° to +266° –238° to +480° – 58° to +302°

On request: Spherical Plain Bearings, type Steel on Special Bronze with a temperature range up to +450° Celsius or +842° Fahrenheit are available. Also stainless steel Spherical Plain Bearings, type Steel on Steel, with an operating temperature of up to +500° Celsius or +932° Fahrenheit are available.

Material Conversion Table Material 1.0402 1.0503 2.1030 2.0561 1.3505 1.7225 1.0718 1.4006 1.4034 1.4057 1.4112 1.4125 1.4301 1.4305 1.4401 1.4542 1.4571

DIN German France Italy Sweden UK USA C22 XC25 C21 1450 070M20 M1023 C45 1C45 C45 1650 080M46 Aisi 1045 CuSn8 CuZn40AI1 100Cr6 100Cr6 100Cr6 2258 2S135 Aisi 52100 42CrMo4 42CrMo4 42CrMo4 2244 708M40 Aisi 4140 9SMnPb28K S250Pb CF9SMnPb28 1912 230M07 12L13 X10Cr13 Z10C13 X12Cn13 2302 410C21 Aisi 410 X46Cr13 Z44C14 X40Cr14 420S45 Aisi 420C X20CrNi172 Z15CN16-02 X16CrNi16 2321 431S29 Aisi 431 X90CrMoV18 Aisi 440B X105CrMo17 Z100CD17 Aisi 440C X5CrNi1810 Z4CN19-10FF X5CrNi1810 2332 304S17 Aisi 304 X10CrNiS189 Z8CNF18-09 X10CrNiS1809 2346 303S22 Aisi 303 X5CrNiMo17122 Z7CND17-12-02 X5CrNiMo1712 2347 316S17 Aisi 316 X5CrNiCuNb174 Z7CNU15-05 Aisi 630 (174Ph) X6CrNiMoTi17-12-2 Z6CNDT17-12 X6CrNiMoTi1712 2350 320S18 Aisi 316Ti

FLURO-Gelenklager GmbH

13

Technical Information Bearing Load ratings Bearing Load ratings are bearing specific data, derived from the characteristics of the materials used. They are used when selecting Spherical Plain Bearings or Rod Ends for a particular load, but may have to be reduced in adverse operating conditions. Static Load ratings Co [kN ] Co indicates the maximum permissible static load which a Rod End at its weakest cross section can withstand without developing permanent distortion. The Co values listed in the tables of this brochure have been calculated by using the appropiate material specifications and have been tested on a number of Rod Ends during tensile tests carried out at ambient temperature. 80% of the yield strength resulting from the tests have been used so that a safety factor of 1.25 is included. The static load Co is also used for establishing the maximum axial load which is limited by an additional bending stress principally due to the method of fastening of the insert. Following are maximum axial values (deformation) which have been established by pressure testing: (1)

Fa = Fa, max = a . Co

[kN ]

a = Co, req = 6,56 kN Fr2 = 4,00 kN m Fr, max = Co . fB . fT = 23,5 . 0,5 . 1 = 11,75 kN C exist = 32,0 kN > C req = 5,75 kN Fa = 0,65 kN m Fa, max = a . Fr, max = 0,2 . 11,75 = 2,35 kN [a = 0,2 see formula 1] When selecting the size the dynamic load Creq should not exceed the static load Co, exist

3. Checking the slip speed

and

[formula 6 + 6a]

2. Checking the surface pressure

Y = 1,26 for Fa/Fm = 0,65/2,46 = 0,26

Gh P 3 . f

[formula 11 + table 7 + 4 + 8 + 9] L

.f

T

.f

G

( )=

. f V . C/F vm

exist

3 . 1 . 1 . 4,2 . 1 9,75 = 11.100 hrs. 0,011

6. Final selection Steps 1c to 5 can then be repeated for series GAXSW so that after comparing the required material strength, price etc. of each type, a final decision can be taken.

FLURO-Gelenklager GmbH

19

Rod Ends Series K - Standard GI

Series

Rod Ends with female thread made from freecutting or heat-treated steel, zinc plated and fitted with a grease nipple

Especially suited for axial loads

Size (D)

B

M

A

F

L

K

J

O

SW

G

GL

Static load Co kN

5 6 8 10 12 14 16 18 20 22 25

8 9 12 14 16 19 21 23 25 28 31

6,00 6,75 9,00 10,50 12,00 13,50 15,00 16,50 18,00 20,00 22,00

18 20 24 28 32 36 42 46 50 54 60

27 30 36 43 50 57 64 71 77 84 94

36 40 48 57 66 75 85 94 102 111 124

11 13 16 19 22 25 27 31 34 37 42

9,0 10,0 12,5 15,0 17,5 20,0 22,0 25,0 27,5 30,0 33,5

7,7 8,9 10,4 12,9 15,4 16,8 19,3 21,8 24,3 25,8 29,6

9 11 13 17 19 22 22 27 32 32 36

M5 M6 M8 M 10 M 12 M 14 M 16 M 18x1,5 M 20x1,5 M 22x1,5 M 24x2

10 12 16 20 22 25 28 32 33 37 42

9,9 11,9 17,1 21,4 27,0 24,5 37,0 43,0 49,5 57,0 68,0

Materials: Housing:

up to size 12 turned from free-cutting steel to 9SMnPb28K, 12L13 from size 14 forged from heat-treated steel to C22, M1023

Insert:

Special brass to CuZn38AI1

Ball:

Bearing steel to 100Cr6, Aisi 52100, hardened, ground, polished

Cetop connections see page 40.

20

FLURO-Gelenklager GmbH

Dynamic load C kN

Limiting speed rev/min

Weight g

2,5 3,2 5,4 7,5 10,0 13,0 16,0 19,5 23,5 29,0 35,0

900 760 620 500 450 360 350 320 280 250 230

18 27 46 76 115 170 230 320 415 540 750

Rod Ends Series K - Standard Series

GA

Rod Ends with male thread made from freecutting or heat-treated steel, zinc plated and fitted with a grease nipple

Especially suited for axial loads

Size (D)

B

M

A

F

L

O

G

GL

Static load Co kN

51) 6 8 10 12 14 16 18 20 22 25

8 9 12 14 16 19 21 23 25 28 31

6,00 6,75 9,00 10,50 12,00 13,50 15,00 16,50 18,00 20,00 22,00

18 20 24 28 32 36 42 46 50 54 60

33 36 42 48 54 60 66 72 78 84 94

42 46 54 62 70 78 87 95 103 111 124

7,7 8,9 10,4 12,9 15,4 16,8 19,3 21,8 24,3 25,8 29,6

M5 M6 M8 M 10 M 12 M 14 M 16 M 18x1,5 M 20x1,5 M 22x1,5 M 24x2

19 21 25 28 32 36 40 44 47 51 57

4,3 6,0 11,0 17,4 25,5 24,5 36,5 43,0 49,5 57,0 68,0

Dynamic load C kN

Limiting speed rev/min

Weight g

2,5 3,2 5,4 7,5 10,0 13,0 16,0 19,5 23,5 29,0 35,0

900 760 620 500 450 360 350 320 280 250 230

13 20 33 56 87 129 189 267 348 443 600

Materials: Housing:

up to size 12 turned from free-cutting steel to 9SMnPb28K, 12L13 from size 14 forged from heat-treated steel to C22, M1023

Insert:

Special brass to CuZn38AI1

Ball:

Bearing steel to 100Cr6, Aisi 52100, hardened, ground, polished

1)

without lubrication hole

FLURO-Gelenklager GmbH

21

Rod Ends Series K - Heavy Duty Series

GIS

Rod Ends with female thread made from freecutting or heat-treated steel, zinc plated and fitted with a grease nipple

Especially suited for high speed applications

Size (D) 21) 31) 5 6 8 10 12 14 16 18 20 22 25 30 35 40 50

B 4,5 6,0 8,0 9,0 12,0 14,0 16,0 19,0 21,0 23,0 25,0 28,0 31,0 37,0 43,0 49,0 60,0

M

A

3,60 9 4,50 14 6,00 18 6,75 20 9,00 24 10,50 28 12,00 32 13,50 36 15,00 42 16,50 46 18,00 50 20,00 54 22,00 60 25,00 70 28,00 80 35,00 90 45,00 116

F

L

K

J

O

SW

16 21 27 30 36 43 50 57 64 71 77 84 94 110 125 142 160

20,5 27,0 36,0 40,0 48,0 57,0 66,0 75,0 85,0 94,0 102,0 111,0 124,0 145,0 165,0 187,0 218,0

4,5 6,5 11,0 13,0 16,0 19,0 22,0 25,0 27,0 31,0 34,0 37,0 42,0 51,0 58,0 69,0 78,0

3,8 5,0 9,0 10,0 12,5 15,0 17,5 20,0 22,0 25,0 27,5 30,0 33,5 40,0 46,0 57,0 65,0

2,6 5,1 7,7 8,9 10,4 12,9 15,4 16,8 19,3 21,8 24,3 25,8 29,6 34,8 37,7 44,2 55,9

4,0 5,5 9,0 11,0 13,0 17,0 19,0 22,0 22,0 27,0 32,0 32,0 36,0 41,0 50,0 60,0 65,0

M M M M M M M M M M M M M M M M M

G

GL

Static load Co kN

Dynamic load C kN

2 3 5 6 8 10 12 14 16 18x1,5 20x1,5 22x1,5 24x2 30x2 36x2 42x2 48x2

7 10 10 12 16 20 22 25 28 32 33 37 42 51 56 60 65

3,0 4,1 8,0 8,9 14,1 19,3 23,5 21,0 32,0 38,5 44,0 53,0 62,0 82,0 101,0 124,0 308,0

1,1 1,8 3,3 4,3 7,1 10,0 13,5 17,0 21,5 26,0 31,5 38,0 47,0 64,0 80,0 116,0 185,0

Materials: Housing:

up to size 12 turned from free-cutting steel to 9SMnPb28K, 12L13 from size 14 forged from heat-treated steel to C22, M1023 Size 50 turned from heat-treated steel to C45, Aisi 1045

Insert:

Special high strength bronze to CuSn8

Ball:

Bearing steel to 100Cr6, Aisi 52100, hardened, ground, polished

This series is also available sealed (see page 38) or with threaded bolt (see page 39). Cetop connections see page 40. 1)

22

without lubrication fitting

FLURO-Gelenklager GmbH

Limiting speed rev/min

1200 1500 1200 1000 860 750 660 600 540 500 440 370 330 290 230

Weight g 3 6 18 27 46 76 115 170 230 320 415 540 750 1130 1600 2770 5000

Rod Ends Series K - Heavy Duty Series

GAS

Rod Ends with male thread made from freecutting or heat-treated steel, zinc plated and fitted with a grease nipple

Especially suited for high speed applications

Size (D) 21) 31) 51) 6 8 10 12 14 16 18 20 22 25 30 35 40 50

B 4,5 6,0 8,0 9,0 12,0 14,0 16,0 19,0 21,0 23,0 25,0 28,0 31,0 37,0 43,0 49,0 60,0

M 3,60 4,50 6,00 6,75 9,00 10,50 12,00 13,50 15,00 16,50 18,00 20,00 22,00 25,00 28,00 35,00 45,00

A

F

L

O

9 14 18 20 24 28 32 36 42 46 50 54 60 70 80 90 116

20 26 33 36 42 48 54 60 66 72 78 84 94 110 125 142 185

24,5 33,0 42,0 46,0 54,0 62,0 70,0 78,0 87,0 95,0 103,0 111,0 124,0 145,0 165,0 187,0 243,0

2,6 5,1 7,7 8,9 10,4 12,9 15,4 16,8 19,3 21,8 24,3 25,8 29,6 34,8 37,7 44,2 55,9

GL

Static load Co kN

Dynamic load C kN

M2 12 M3 15 M5 19 M6 21 M8 25 M 10 28 M 12 32 M 14 38 M 16 40 M 18x1,5 44 M 20x1,5 47 M 22x1,5 51 M 24x2 58 M 30x2 71 M 36x2 73 M 42x2 78 M 48x2 105

0,6 1,5 4,3 6,0 11,0 17,4 23,5 21,0 32,0 38,5 44,0 53,0 62,0 82,0 101,0 124,0 308,0

1,1 1,8 3,3 4,3 7,1 10,0 13,5 17,0 21,5 26,0 31,5 38,0 47,0 64,0 80,0 116,0 185,0

G

Limiting speed rev/min

1500 1200 1000 860 750 660 600 540 500 440 370 330 290 230

Weight g 3 6 13 20 33 56 87 129 189 267 348 443 600 1030 1600 2550 4800

Materials: Housing:

up to size 12 turned from free-cutting steel to 9SMnPb28K, 12L13 from size 14 forged from heat-treated steel to C22, M1023 size 50 turned from heat-treated steel to C45, Aisi 1045

Insert:

Special high strength bronze to CuSn8

Ball:

Bearing steel to 100Cr6, Aisi 52100, hardened, ground, polished

This series is also available sealed (see page 38) or with threaded bolt (see page 39). 1)

without lubrication fitting

FLURO-Gelenklager GmbH

23

Rod Ends Series K - Extra Heavy Duty GIXS

Series

Rod Ends with female thread made from heattreated steel, zinc plated and regreasable through a grease nipple in housing

Especially suitable for high pressure and tension loads

Size (D)

B

M

A

F

L

K

J

O

SW

G

GL

Static load Co kN

Dynamic load C kN

Limiting speed rev/min

Weight g

6 8 10 12 14 16 18 20 22 25 30

9 12 14 16 19 21 23 25 28 31 37

6,75 9,00 10,50 12,00 13,50 15,00 16,50 18,00 20,00 22,00 25,00

20 24 28 32 36 42 46 50 54 60 70

30 36 43 50 57 64 71 77 84 94 110

40 48 57 66 75 85 94 102 111 124 145

13 16 19 22 25 27 31 34 37 42 51

10,0 12,5 15,0 17,5 20,0 22,0 25,0 27,5 30,0 33,5 40,0

8,9 10,4 12,9 15,4 16,8 19,3 21,8 24,3 25,8 29,6 34,8

11 13 17 19 22 22 27 32 32 36 41

M6 M8 M 10 M 12 M 14 M 16 M 18x1,5 M 20x1,5 M 22x1,5 M 24x2 M 30x2

12 16 20 22 25 28 32 33 37 42 51

16,7 25,5 34,8 42,0 57,0 67,5 81,5 93,5 114,0 135,0 184,0

4,3 7,1 10,0 13,3 17,0 21,5 26,0 31,5 38,0 47,0 64,0

1500 1200 1000 860 750 660 600 540 500 440 370

27 46 76 115 170 230 320 415 540 750 1130

Materials: Housing:

Heat-treated steel to 42CrMo4, Aisi 4140, forged

Insert:

Special high strength bronze to CuSn8

Ball:

Bearing steel to 100Cr6, Aisi 52100, hardened, ground, polished

This series is also available sealed (see page 38) or with threaded bolt (see page 39). Cetop connections see page 40.

24

FLURO-Gelenklager GmbH

Rod Ends Series K - Extra Heavy Duty Series

GAXS

Rod Ends with male thread made from heattreated steel, zinc plated and regreasable through a grease nipple in housing

Especially suitable for high pressure and tension loads

Size (D)

B

M

A

F

6 8 10 12 14 16 18 20 22 25 30

9 12 14 16 19 21 23 25 28 31 37

6,75 9,00 10,50 12,00 13,50 15,00 16,50 18,00 20,00 22,00 25,00

20 24 28 32 36 42 46 50 54 60 70

36 42 48 54 60 66 72 78 84 94 110

L

O

G

GL

Static load Co kN

Dynamic load C kN

Limiting speed rev/min

Weight g

46 54 62 70 78 87 95 103 111 124 145

8,9 10,4 12,9 15,4 16,8 19,3 21,8 24,3 25,8 29,6 34,8

M6 M8 M 10 M 12 M 14 M 16 M 18x1,5 M 20x1,5 M 22x1,5 M 24x2 M 30x2

21 25 28 32 38 40 44 47 51 57 71

9,8 19,5 31,4 42,0 57,0 67,5 81,5 93,5 114,0 135,0 184,0

4,3 7,1 10,0 13,5 17,0 21,5 26,0 31,5 38,0 47,0 64,0

1500 1200 1000 860 750 660 600 540 500 440 370

20 33 56 87 129 189 267 348 443 600 1030

Materials: Housing:

Heat-treated steel to 42CrMo4, Aisi 4140, forged

Insert:

Special high strength bronze to CuSn8

Ball:

Bearing steel to 100Cr6, Aisi 52100, hardened, ground, polished

This series is also available sealed (see page 38) or with threaded bolt (see page 39).

FLURO-Gelenklager GmbH

25

Rod Ends Series K - Stainless GIRS

Series

Rod Ends with female thread made from stainless steel, regreasable through grease nipple in housing

For use in corrosive environments

Size (D)

B

M

A

F

L

K

J

O

SW

G

GL

Static load Co kN

Dynamic load C kN

Limiting speed rev/min

31) 5 6 8 10 12 14 16 18 20 22 25 30 35 40

6 8 9 12 14 16 19 21 23 25 28 31 37 43 49

4,50 6,00 6,75 9,00 10,50 12,00 13,50 15,00 16,50 18,00 20,00 22,00 25,00 28,00 35,00

14 18 20 24 28 32 36 42 46 50 54 60 70 80 90

21 27 30 36 43 50 57 64 71 77 84 94 110 125 142

27 36 40 48 57 66 75 85 94 102 111 124 145 165 187

6,5 11,0 13,0 16,0 19,0 22,0 25,0 27,0 31,0 34,0 37,0 42,0 51,0 58,0 69,0

5,0 9,0 10,0 12,5 15,0 17,5 20,0 22,0 25,0 27,5 30,0 33,5 40,0 46,0 57,0

5,1 7,7 8,9 10,4 12,9 15,4 16,8 19,3 21,8 24,3 25,8 29,6 34,8 37,7 44,2

5,5 9,0 11,0 13,0 17,0 19,0 22,0 22,0 27,0 32,0 32,0 36,0 41,0 50,0 60,0

M3 M5 M6 M8 M 10 M 12 M 14 M 16 M 18x1,5 M 20x1,5 M 22x1,5 M 24x2 M 30x2 M 36x2 M 42x2

10 10 12 16 20 22 25 28 32 33 37 42 51 56 60

8,0 11,8 13,1 20,7 28,3 34,5 39,5 60,5 73,0 83,0 100,0 118,0 155,0 191,0 235,0

1,8 3,3 4,3 7,1 10,0 13,5 17,0 21,5 26,0 31,5 38,0 47,1 64,0 80,0 116,0

1200 1500 1200 1000 860 750 660 600 540 500 440 370 330 290

Weight g 6 18 27 46 76 115 170 230 320 415 540 750 1130 1600 2770

Materials: Housing:

Stainless steel to 1.4057, Aisi 431, forged, polished size 40 made from stainless steel to 1.4057, Aisi 431, turned

Insert:

Special high strength bronze to CuSn8

Ball:

Bearing steel to 100Cr6, Aisi 52100, hardened, ground, polished, hard chrome plated on the running surface

On request: The ball can be made from stainless steel to 1.4034, Aisi 420C, hardened, ground, polished On request: The insert can be made to stainless steel 1.4301, Aisi 304, or 17-4PH (1.4542) etc. This series is also available sealed (see page 38) or with threaded bolt (see page 39). Cetop connections see page 40. 1)

26

without lubrication fitting

FLURO-Gelenklager GmbH

Rod Ends Series K - Stainless Series

GARS

Rod Ends with male thread made from stainless steel, regreasable through grease nipple in housing

For use in corrosive environments

Size (D)

B

M

A

31) 51) 6 8 10 12 14 16 18 20 22 25 30 35 40

6 8 9 12 14 16 19 21 23 25 28 31 37 43 49

4,50 6,00 6,75 9,00 10,50 12,00 13,50 15,00 16,50 18,00 20,00 22,00 25,00 28,00 35,00

14 18 20 24 28 32 36 42 46 50 54 60 70 80 90

F 26 33 36 42 48 54 60 66 72 78 84 94 110 125 142

L

O

33 42 46 54 62 70 78 87 95 103 111 124 145 165 187

5,1 7,7 8,9 10,4 12,9 15,4 16,8 19,3 21,8 24,3 25,8 29,6 34,8 37,7 44,2

M M M M M M M M M M M M M M M

G

GL

Static load Co kN

Dynamic load C kN

3 5 6 8 10 12 14 16 18x1,5 20x1,5 22x1,5 24x2 30x2 36x2 42x2

15 19 21 25 28 32 38 40 44 47 51 57 71 73 78

7,0 6,2 8,8 16,1 25,5 34,5 39,5 60,5 73,0 83,0 100,0 118,0 155,0 191,0 235,0

1,8 3,3 4,3 7,1 10,0 13,5 17,0 21,5 26,0 31,5 38,0 47,0 64,0 80,0 116,0

Limiting speed rev/min

1500 1200 1000 860 750 660 600 540 500 440 370 330 290

Weight g 6 13 20 33 56 87 129 189 267 348 443 600 1030 1600 2570

Materials: Housing:

Stainless steel to 1.4057, Aisi 431, forged, polished size 40 made from stainless steel to 1.4057, Aisi 431, turned

Insert:

Special high strength bronze to CuSn8

Ball:

Bearing steel to 100Cr6, Aisi 52100, hardened, ground, polished, hard chrome plated on the running surface

On request:

The ball can be made from stainless steel to 1.4034, Aisi 420C, hardened, ground, polished

On request:

The insert can be made to stainless steel 1.4301, Aisi 304, or 17-4PH (1.4542) etc.

This series is also available sealed (see page 38) or with threaded bolt (see page 39). 1)

without lubrication fitting

FLURO-Gelenklager GmbH

27

Rod Ends Series K - Maintenance Free GISW

Series

Rod Ends with female thread made from freecutting or heat-treated steel, zinc plated with PTFE liner, maintenance free

For use at dynamic loads

B

5 6 8 10 12 14 16 18 20 22 25 30 35 40 50

8 9 12 14 16 19 21 23 25 28 31 37 43 49 60

M

A

6,00 18 6,75 20 9,00 24 10,50 28 12,00 32 13,50 36 15,00 42 16,50 46 18,00 50 20,00 54 22,00 60 25,00 70 28,00 80 35,00 90 45,00 116

F

L

K

J

O

SW

27 30 36 43 50 57 64 71 77 84 94 110 125 142 160

36 40 48 57 66 75 85 94 102 111 124 145 165 187 218

11 13 16 19 22 25 27 31 34 37 42 51 58 69 78

9,0 10,0 12,5 15,0 17,5 20,0 22,0 25,0 27,5 30,0 33,5 40,0 46,0 57,0 65,0

7,7 8,9 10,4 12,9 15,4 16,8 19,3 21,8 24,3 25,8 29,6 34,8 37,7 44,2 55,9

9 11 13 17 19 22 22 27 32 32 36 41 50 60 65

M M M M M M M M M M M M M M M

G

GL

Static load Co kN

Dynamic load C kN

Limiting speed rev/min

Weight g

5 6 8 10 12 14 16 18x1,5 20x1,5 22x1,5 24x2 30x2 36x2 42x2 48x2

10 12 16 20 22 25 28 32 33 37 42 51 56 60 65

8,0 8,9 14,1 19,3 23,5 21,0 32,0 38,5 44,0 53,0 62,0 82,0 101,0 124,0 308,0

7,5 9,3 16,7 23,4 32,0 42,0 52,5 64,0 78,0 97,0 122,0 168,0 206,0 286,0 485,0

600 530 420 350 300 260 230 210 190 170 150 130 110 100 80

18 27 46 76 115 170 230 320 415 540 750 1130 1600 2770 5000

only for short-term revolutions recommended

Size (D)

Materials: Housing:

up to size 12 turned, from free-cutting steel to 9SMnPb28K, 12L13 from size 14 forged, from heat-treated steel to C22, M1023 size 50 turned from heat-treated steel to C45, Aisi 1045

Insert:

Free-cutting steel to 9SMnPb28K, 12L13, with PTFE liner bonded to the inner surface

Ball:

Bearing steel to 100Cr6, Aisi 52100, hardened, ground, polished

This series is also available sealed (see page 38) or with threaded bolt (see page 39). Cetop connections see page 40.

!

28

Please note: The dynamic load "C" of the bearing of some rod ends is in some sizes higher than the static load "Co" of the rod end.

FLURO-Gelenklager GmbH

Rod Ends Series K - Maintenance Free Series

GASW

Rod Ends with male thread made from freecutting or heat-treated steel, zinc plated with PTFE liner, maintenance free

For use at dynamic loads

B

M

5 6 8 10 12 14 16 18 20 22 25 30 35 40 50

8 9 12 14 16 19 21 23 25 28 31 37 43 49 60

6,00 6,75 9,00 10,50 12,00 13,50 15,00 16,50 18,00 20,00 22,00 25,00 28,00 35,00 45,00

A 18 20 24 28 32 36 42 46 50 54 60 70 80 90 116

F

L

O

33 36 42 48 54 60 66 72 78 84 94 110 125 142 185

42 46 54 62 70 78 87 95 103 111 124 145 165 187 243

7,7 8,9 10,4 12,9 15,4 16,8 19,3 21,8 24,3 25,8 29,6 34,8 37,7 44,2 55,9

GL

Static load Co kN

Dynamic load C kN

Limiting speed rev/min

Weight g

M5 19 M6 21 M8 25 M 10 28 M 12 32 M 14 38 M 16 40 M 18x1,5 44 M 20x1,5 47 M 22x1,5 51 M 24x2 57 M 30x2 71 M 36x2 73 M 42x2 78 M 48x2 105

4,3 6,0 11,0 17,4 23,5 21,0 32,0 38,5 44,0 53,0 61,0 82,0 101,0 124,0 308,0

7,5 9,3 16,7 23,4 32,0 42,0 52,5 64,0 78,0 97,0 122,0 168,0 206,0 286,0 485,0

600 530 420 350 300 260 230 210 190 170 150 130 110 100 80

13 20 33 56 87 129 189 267 348 443 600 1030 1600 2570 4800

G

only for short-term revolutions recommended

Size (D)

Materials: Housing:

up to size 12 turned, from free-cutting steel to 9SMnPb28K, 12L13 from size 14 forged, from heat-treated steel to C22, M1023 size 50 turned from heat-treated steel to C45, Aisi 1045

Insert:

Free-cutting steel to 9SMnPb28K, 12L13, with PTFE liner bonded to the inner surface

Ball:

Bearing steel to 100Cr6, Aisi 52100, hardened, ground, polished

This series is also available sealed (see page 38) or with threaded bolt (see page 39).

!

Please note: The dynamic load "C" of the bearing of some rod ends is in some sizes higher than the static load "Co" of the rod end.

FLURO-Gelenklager GmbH

29

Rod Ends Series K - Maintenance Free GIXSW

Series

Rod Ends with female thread made from heat-treated steel, zinc plated with PTFE liner, maintenance free

For use at high pressure and tension loads

B

M

A

F

L

K

J

O

SW

G

GL

Static load Co kN

Dynamic load C kN

Limiting speed rev/min

Weight g

6 8 10 12 14 16 18 20 22 25 30 35 40

9 12 14 16 19 21 23 25 28 31 37 43 49

6,75 9,00 10,50 12,00 13,50 15,00 16,50 18,00 20,00 22,00 25,00 28,00 35,00

20 24 28 32 36 42 46 50 54 60 70 80 90

30 36 43 50 57 64 71 77 84 94 110 125 142

40 48 57 66 75 85 94 102 111 124 145 165 187

13 16 19 22 25 27 31 34 37 42 51 58 69

10,0 12,5 15,0 17,5 20,0 22,0 25,0 27,5 30,0 33,5 40,0 46,0 57,0

8,9 10,4 12,9 15,4 16,8 19,3 21,8 24,3 25,8 29,6 34,8 37,7 44,2

11 13 17 19 22 22 27 32 32 36 41 50 60

M6 M8 M 10 M 12 M 14 M 16 M 18x1,5 M 20x1,5 M 22x1,5 M 24x2 M 30x2 M 36x2 M 42x2

12 16 20 22 25 28 32 33 37 42 51 56 60

16,7 25,5 34,8 42,0 57,0 67,5 81,5 93,5 114,0 135,0 184,0 230,0 270,0

9,3 16,7 23,4 32,0 42,0 52,5 64,0 78,0 97,0 122,0 168,0 205,0 286,0

530 420 350 300 260 230 210 190 170 150 130 110 100

27 46 76 115 170 230 320 415 540 750 1130 1600 2770

only for short-term revolutions recommended

Size (D)

Materials: Housing:

Heat-treated steel to 42CrMo4, Aisi 4140, forged

Insert:

Free-cutting steel to 9SMnPb28K, 12L13, with PTFE liner bonded to the inner surface

Ball:

Bearing steel to 100Cr6, Aisi 52100, hardened, ground, polished

This series is also available sealed (see page 38) or with threaded bolt (see page 39). Cetop connections see page 40.

30

FLURO-Gelenklager GmbH

Rod Ends Series K - Maintenance Free Series

GAXSW

Rod Ends with male thread made from heat-treated steel, zinc plated with PTFE liner, maintenance free

For use at high pressure and tension loads

B

M

A

F

6 8 10 12 14 16 18 20 22 25 30 35

9 12 14 16 19 21 23 25 28 31 37 43

6,75 9,00 10,50 12,00 13,50 15,00 16,50 18,00 20,00 22,00 25,00 28,00

20 24 28 32 36 42 46 50 54 60 70 80

36 42 48 54 60 66 72 78 84 94 110 125

L

O

G

GL

Static load Co kN

Dynamic load C kN

Limiting speed rev/min

46 54 62 70 78 87 95 103 111 124 145 165

8,9 10,4 12,9 15,4 16,8 19,3 21,8 24,3 25,8 29,6 34,8 37,7

M6 M8 M 10 M 12 M 14 M 16 M 18x1,5 M 20x1,5 M 22x1,5 M 24x2 M 30x2 M 36x2

21 25 28 32 38 40 44 47 51 57 71 73

9,8 19,5 31,4 42,0 57,0 67,0 81,5 93,5 114,0 135,0 184,0 230,0

9,3 16,7 23,4 32,0 42,0 52,5 64,0 78,0 97,0 122,0 168,0 205,0

530 420 350 300 260 230 210 190 170 150 130 110

only for short-term revolutions recommended

Size (D)

Weight g 20 33 56 87 129 189 267 348 443 600 1030 1600

Materials: Housing:

Heat-treated steel to 42CrMo4, Aisi 4140, forged

Insert:

Free-cutting steel to 9SMnPb28K, 12L13, with PTFE liner bonded to the inner surface

Ball:

Bearing steel to 100Cr6, Aisi 52100, hardened, ground, polished

This series is also available sealed (see page 38) or with threaded bolt (see page 39).

FLURO-Gelenklager GmbH

31

Rod Ends Series K - Stainless, Maintenance Free GIRSW

Series

Rod Ends with female thread made from stainless steel with PTFE liner, maintenance free

For use at high dynamic pressure and tension loads in corrosive environments

B

M

A

F

L

K

J

O

SW

G

GL

Static load Co kN

Dynamic load C kN

Limiting speed rev/min

41) 5 6 8 10 12 14 16 18 20 22 25 30 35 40

7 8 9 12 14 16 19 21 23 25 28 31 37 43 49

5,25 6,00 6,75 9,00 10,50 12,00 13,50 15,00 16,50 18,00 20,00 22,00 25,00 28,00 35,00

14 18 20 24 28 32 36 42 46 50 54 60 70 80 90

24 27 30 36 43 50 57 64 71 77 84 94 110 125 142

31 36 40 48 57 66 75 85 94 102 111 124 145 165 187

9,5 11,0 13,0 16,0 19,0 22,0 25,0 27,0 31,0 34,0 37,0 42,0 50,0 58,0 69,0

7,8 9,0 10,0 12,5 15,0 17,5 20,0 22,0 25,0 27,5 30,0 33,5 40,0 46,0 57,0

6,5 7,7 8,9 10,4 12,9 15,4 16,8 19,3 21,8 24,3 25,8 29,6 34,8 37,7 44,2

8 9 11 13 17 19 22 22 27 32 32 36 41 50 60

M4 M5 M6 M8 M 10 M 12 M 14 M 16 M 18x1,5 M 20x1,5 M 22x1,5 M 24x2 M 30x2 M 36x2 M 42x2

12 10 12 16 20 22 25 28 32 33 37 42 51 56 60

2,5 11,8 13,1 20,7 28,3 34,5 39,5 60,5 73,0 83,0 100,0 118,0 155,0 191,0 235,0

5,1 7,5 9,3 16,7 23,4 32,0 42,0 52,5 64,0 78,0 97,0 122,0 168,0 206,0 286,0

600 530 420 350 300 260 230 210 190 170 150 130 110 100

only for short-term revolutions recommended

Size (D)

Weight g 11 18 27 46 76 115 170 230 320 415 540 750 1130 1600 2770

Materials: Housing:

Stainless steel to 1.4057, Aisi 431, forged, polished size 40 turned from stainless steel to 1.4057, Aisi 431

Insert:

Special high strength bronze to CuSn8 with PTFE liner bonded to the inner surface

Ball:

Bearing steel to 100Cr6, Aisi 52100, hardened, ground, polished, hard chrome plated on the running surface

On request: Insert: Stainless steel to 1.4571, Aisi 316Ti Ball: Stainless steel to 1.4034, Aisi 420C hardened, ground, polished or in stainless steel to 1.4401, Aisi 316 / 1.4404, Aisi 316L ground, polished This series is also available sealed (see page 38) or with threaded bolt (see page 39). Cetop connections see page 40. 1)

!

32

Size 4 on request. Housing turned from stainless steel to 1.4305, Aisi 303

Please note: The dynamic load "C" of the bearing of some rod ends is in some sizes higher than the static load "Co" of the rod end.

FLURO-Gelenklager GmbH

Rod Ends Series K - Stainless, Maintenance Free Series

GARSW

Rod Ends with male thread made from stainless steel with PTFE liner, maintenance free

For use at high dynamic pressure and tension loads in corrosive environments

B

41) 5 6 8 10 12 14 16 18 20 22 25 30 35 40

7 8 9 12 14 16 19 21 23 25 28 31 37 43 49

M 5,25 6,00 6,75 9,00 10,50 12,00 13,50 15,00 16,50 18,00 20,00 22,00 25,00 28,00 35,00

A

F

L

O

G

GL

Static load Co kN

Dynamic load C kN

Limiting speed rev/min

Weight g

14 18 20 24 28 32 36 42 46 50 54 60 70 80 90

30 33 36 42 48 54 60 66 72 78 84 94 110 125 142

37 42 46 54 62 70 78 87 95 103 111 124 145 165 187

6,5 7,7 8,9 10,4 12,9 15,4 16,8 19,3 21,8 24,3 25,8 29,6 34,8 37,7 44,2

M4 M5 M6 M8 M 10 M 12 M 14 M 16 M 18x1,5 M 20x1,5 M 22x1,5 M 24x2 M 30x2 M 36x2 M 42x2

19 19 21 25 28 32 38 40 44 47 51 57 71 73 78

2,5 6,2 8,8 16,1 25,5 34,5 39,5 60,5 73,0 83,0 100,0 118,0 155,0 191,0 235,0

5,1 7,5 9,3 16,7 23,4 32,0 42,0 52,5 64,0 78,0 97,0 122,0 168,0 206,0 286,0

–––– 600 530 420 350 300 260 230 210 190 170 150 130 110 100

9 13 20 33 56 87 129 189 267 348 443 600 1030 1600 2570

only for short-term revolutions recommended

Size (D)

Materials: Housing:

Stainless steel to 1.4057, Aisi 431, forged, polished size 40 turned from stainless steel to 1.4057, Aisi 431

Insert:

Special high strength bronze to CuSn8 with PTFE liner bonded to the inner surface

Ball:

Bearing steel to 100Cr6, Aisi 52100, hardened, ground, polished, hard chrome plated on the running surface

On request: Insert: Stainless steel to 1.4571, Aisi 316Ti Ball: Stainless steel to 1.4034, Aisi 420C hardened, ground, polished or in stainless steel to 1.4401, Aisi 316 / 1.4404, Aisi 316L ground, polished This series is also available sealed (see page 38) or with threaded bolt (see page 39). 1)

!

Size 4 on request. Housing turned from stainless steel to 1.4305, Aisi 303

Please note: The dynamic load "C" of the bearing of some rod ends is in some sizes higher than the static load "Co" of the rod end.

FLURO-Gelenklager GmbH

33

Rod Ends Series K - Steel on Steel GIO

Series

Rod Ends with female thread made from freecutting or heat-treated steel, zinc plated without the insert, running surface steel on steel High axial load in one direction only. To be used only with limited oscillating movements

Size (D)

B

M

A

F

L

K

J

O

SW

G

GL

Static load Co kN

Dynamic load C kN

5 6 8 10 12 14 16 20

8 9 12 14 16 19 21 25

6,00 6,75 9,00 10,50 12,00 13,50 15,00 18,00

18 20 24 28 32 36 42 50

27 30 36 43 50 57 64 77

36 40 48 57 66 75 85 102

11 13 16 19 22 25 27 34

9,0 10,0 12,5 15,0 17,5 20,0 22,0 27,5

7,7 8,9 10,4 12,9 15,4 16,8 19,3 24,3

9 11 13 17 19 22 22 32

M5 M6 M8 M 10 M 12 M 14 M 16 M 20x1,5

10 12 16 20 22 25 28 33

12,0 14,3 21,7 27,8 35,0 32,5 46,0 63,0

2,2 2,8 4,6 6,5 8,5 11,0 14,0 20,0

Limiting speed rev/min

not to be used for complete revolutions

Weight g 18 27 46 76 115 170 230 415

Materials: Housing:

up to size 12 turned, from free-cutting steel to 9SMnPb28K, 12L13 from size 14 forged, from heat-treated steel to C22, M1023

Ball:

Bearing steel to 100Cr6, Aisi 52100, hardened, ground, polished

Cetop connections see page 40.

The base in the steel housing is cylindrically turned from one side and, starting from the centre line, it runs to suit the ball’s contour (see drawing). Hence a high axial load towards the turned radius is possible.

34

FLURO-Gelenklager GmbH

Rod Ends Series K - Steel on Steel Series

GAO

Rod Ends with male thread made from freecutting or heat-treated steel, zinc plated without the insert, running surface steel on steel High axial load in one direction only. To be used only with limited oscillating movements

Size (D)

B

M

A

F

L

O

5 6 8 10 12 14 16 20

8 9 12 14 16 19 21 25

6,00 6,75 9,00 10,50 12,00 13,50 15,00 18,00

18 20 24 28 32 36 42 50

33 36 42 48 54 60 66 78

42 46 54 62 70 78 87 103

7,7 8,9 10,4 12,9 15,4 16,8 19,3 24,3

M M M M M M M M

G

GL

Static load Co kN

Dynamic load C kN

5 6 8 10 12 14 16 20x1,5

19 21 25 28 32 38 40 47

4,3 6,0 11,0 17,4 25,5 26,5 36,5 63,0

2,2 2,8 4,6 6,5 8,5 11,0 14,0 20,5

Limiting speed rev/min

not to be used for complete revolutions

Weight g 13 20 33 56 87 129 189 348

Materials: Housing: up to size 12 turned, from free-cutting steel to 9SMnPb28K, 12L13 from size 14 forged, from heat-treated steel to C22, M1023 Ball:

Bearing steel to 100Cr6, Aisi 52100, hardened, ground, polished

The base in the steel housing is cylindrically turned from one side and, starting from the centre line, it runs to suit the ball’s contour (see drawing). Hence a high axial load towards the turned radius is possible.

FLURO-Gelenklager GmbH

35

Rod Ends Series K - Maintenance Free Series

GIOW

Rod Ends with female thread made from freecutting or heat-treated steel, zinc plated, maintenance free

For use in applications involving minimum axial loads and limited oscillating movements

Size (D)

B

M

A

F

L

4 5 6 8 10 12 14 16 20

7 8 9 12 14 16 19 21 25

5,25 6,00 6,75 9,00 10,50 12,00 13,50 15,00 18,00

14 18 20 24 28 32 36 42 50

24 27 30 36 43 50 57 64 77

31 36 40 48 57 66 75 85 102

K

J

O

SW

G

GL

Static load Co kN

Dynamic load C kN

9,5 11,0 13,0 16,0 19,0 22,0 25,0 27,0 34,0

7,8 9,0 10,0 12,5 15,0 17,5 20,0 22,0 27,5

6,5 7,7 8,9 10,4 12,9 15,4 16,8 19,3 24,3

8 9 11 13 17 19 22 22 32

M4 M5 M6 M8 M 10 M 12 M 14 M 16 M 20x1,5

12 10 12 16 20 22 25 28 33

5,2 9,8 11,8 17,3 22,3 28,5 26,0 39,0 53,0

0,8 1,1 1,4 2,2 3,1 4,0 5,0 7,0 9,5

Materials: Housing: up to size 12 turned from free-cutting steel to 9SMnPb28K, 12L13 from size 14 forged from heat-treated steel to C22, M1023 PTFE glass fibre fabric on the running surface Ball:

Bearing steel to 100Cr6, Aisi 52100, hardened, ground, polished

Cetop connections see page 40.

36

FLURO-Gelenklager GmbH

Limiting speed rev/min

not to be used for complete revolutions

Weight g 11 18 27 46 76 115 170 230 415

Rod Ends Series K - Maintenance Free Series

GAOW

Rod Ends with male thread made from freecutting or heat-treated steel, zinc plated, maintenance free

For use in applications involving minimum axial loads and limited oscillating movements

Size (D)

B

M

A

F

L

O

4 5 6 8 10 12 14 16 20

7 8 9 12 14 16 19 21 25

5,25 6,00 6,75 9,00 10,50 12,00 13,50 15,00 18,00

14 18 20 24 28 32 36 42 50

30 33 36 42 48 54 60 66 78

37 42 46 54 62 70 78 87 103

6,5 7,7 8,9 10,4 12,9 15,4 16,8 19,3 24,3

M M M M M M M M M

G

GL

Static load Co kN

Dynamic load C kN

4 5 6 8 10 12 14 16 20x1,5

19 19 21 25 28 32 38 40 47

2,6 4,3 6,0 11,0 17,4 25,5 26,0 36,5 53,0

0,8 1,1 1,4 2,2 3,1 4,0 5,0 7,0 9,5

Limiting speed rev/min

not to be used for complete revolutions

Weight g 9 13 20 33 56 87 129 189 348

Materials: Housing:

up to size 12 turned from free-cutting steel to 9SMnPb28K, 12L13 from size 14 forged from heat-treated steel to C22, M1023 PTFE glass fibre fabric on the running surface

Ball:

Bearing steel to 100Cr6, Aisi 52100, hardened, ground, polished

FLURO-Gelenklager GmbH

37

Rod Ends Series K - Sealed Version Series

G...-2RS

Sealed Rod Ends Series K in the following versions:

-

G.S G.XS G.RS G.SW G.XSW G.RSW

Size

D

B

M

C

O

8 10 12 14 16 20

6 8 10 12 14 18

19 21 23 26 28 32

9,0 10,5 12,0 13,5 15,0 18,0

18,0 21,0 25,5 29,0 32,0 38,0

10,5 12,5 15,5 17,0 18,5 22,0

Materials:

38

Rod Ends:

See description of respective version

2RS seals:

NBR-Elastomer, temperature resistance -30° to +120° Celsius, or -22° to +248° Fahrenheit, resistant to mineral oils, grease and petrol

Retainers:

Brass

Spacers:

Stainless steel to 1.4305, Aisi 303

FLURO-Gelenklager GmbH

G M8 M 10 M 12 M 14 M 16 M 20x1,5

Pivoting Angle α 10° 10° 10° 12° 12° 12°

Rod Ends Series K - With Threaded Bolt Series

G.....-BO

Rod Ends and Spherical Plain Bearings with threaded bolt. For use as a right angle connector: -

G.S G.XS G.RS G.SW G.XSW G.RSW

Size

L

L1

GL

5 6 8 10 12 14 16 20

16,0 18,5 23,5 28,0 32,5 37,5 42,5 57,0

5,0 5,5 6,5 7,0 7,5 8,5 9,5 12,0

9 10 13 17 20 22 24 35

G M M M M M M M M

5 6 8 10 12 14 16 20

D

SW

7,8 9,0 10,5 13,0 15,0 17,0 19,0 24,0

7 8 8 12 14 14 17 22

Weight of bolt g 5 10 12 25 40 65 90 200

Materials: Rod Ends and Sphericals: See description of respective version Threaded bolt:

Free-cutting steel to 9SMnPb28K, 12L13, zinc plated or stainless steel to 1.4305, Aisi 303

FLURO-Gelenklager GmbH

39

Rod Ends Series K - CETOP Rod Ends for pneumatic cylinders to CETOP RP 103 P All female Rod Ends series are available with CETOP dimensions for pneumatic cylinders

Connections to ISO 8139

Size (D)

B

5 6 8 10 12 16 20 25 30 35 40 50

8 9 12 14 16 21 25 31 37 43 49 60

M

A

6,00 18 6,75 20 9,00 24 10,50 28 12,00 32 15,00 42 18,00 50 22,00 60 25,00 70 28,00 80 35,00 90 45,00 116

F

L

K

J

O

SW

27 30 36 43 50 64 77 94 110 125 142 160

36 40 48 57 66 85 102 124 145 165 187 218

11 13 16 19 22 27 34 42 51 56 69 78

9,0 10,0 12,5 15,0 17,5 22,0 27,5 33,5 40,0 46,0 57,0 65,0

7,7 8,9 10,4 12,9 15,4 19,3 24,3 29,6 34,8 37,7 44,2 55,9

9 11 13 17 19 22 32 36 41 50 60 65

G M M M M M M M M M M M M

4 6 8 10x1,25 12x1,25 16x1,5 20x1,5 24x2 27x2 36x2 42x2 48x2

GL 10 12 16 20 22 28 33 42 51 56 60 65

Static load Co kN

Dynamic load C kN

Limiting speed rev/min

For load details see previous pages

Materials: See previous pages Ordering Details:

40

When ordering please specify Rod Ends series and thread, for example: GI 10x1,25 GISW 16x1,5 GIRSW 30 M27x2

FLURO-Gelenklager GmbH

for cylinder-ø 8 + 10 12 +16 20 25 + 32 40 + 50 50 + 63 80 +100 125 125 160 + 200 250 320

Spherical Plain Bearings Series K - Standard Series

GL

Spherical Plain Bearings with outer ring, from freecutting steel, zinc plated and regreasable

Especially suited for axial loads

Size (D)

B

5 6 8 10 12 14 16 18 20 22 25

8 9 12 14 16 19 21 23 25 28 31

M 6,00 6,75 9,00 10,50 12,00 13,50 15,00 16,50 18,00 20,00 22,00

A

O

Static load Co kN

Dynamic load C kN

16 18 22 26 30 34 38 42 46 50 56

7,7 8,9 10,4 12,9 15,4 16,8 19,3 21,8 24,3 25,8 29,6

10,0 12,8 21,6 30,0 40,0 51,5 64,5 78,5 94,5 114,0 142,0

2,5 3,2 5,4 7,5 10,0 13,0 16,0 19,5 23,5 29,0 35,0

Limiting speed rev/min 900 760 620 500 450 360 350 320 280 250 230

Weight g 8 12 23 38 58 83 115 150 200 270 375

Materials: Outer ring:

Free-cutting steel to 9SMnPb28K, 12L13, turne

Insert:

Special brass to CuZn40AI1

Ball:

Bearing steel to 100Cr6, Aisi 52100, hardened, ground, polished

FLURO-Gelenklager GmbH

41

Spherical Plain Bearings Series K - Heavy Duty Series

GLXS

Spherical Plain Bearings with outer ring, from free-cutting steel, zinc plated and regreasable

For use at high revs

Size (D) 31) 2) 41) 2) 5 6 8 10 12 14 16 18 20 22 25 30 35 40

B 6 7 8 9 12 14 16 19 21 23 25 28 31 37 43 49

M 4,50 5,25 6,00 6,75 9,00 10,50 12,00 13,50 15,00 16,50 18,00 20,00 22,00 25,00 28,00 35,00

A

O

Static load Co kN

Dynamic load C kN

12 14 16 18 22 26 30 34 38 42 46 50 56 66 78 87

5,1 6,5 7,7 8,9 10,4 12,9 15,4 16,8 19,3 21,8 24,3 25,8 29,6 34,8 37,7 44,2

10,8 14,5 19,8 25,8 42,6 60,0 80,0 102,5 128,5 157,0 188,5 229,0 293,0 381,0 480,0 693,0

1,8 2,5 3,3 4,3 7,1 10,0 13,5 17,0 21,5 26,0 31,5 38,0 47,0 64,0 80,0 116,0

Materials: Outer ring:

Free-cutting steel to 9SMnPb28K, 12L13, turned

Insert:

Special high strength bronze to CuSn8

Ball:

Bearing steel to 100Cr6, Aisi 52100, hardened, ground, polished

This series is also available with threaded bolt (see page 39). 1) 2)

42

without lubrication hole Outer Ring as one piece to CuSn8

FLURO-Gelenklager GmbH

Limiting speed rev/min

1200 1500 1200 1000 860 750 660 600 540 500 440 370 330 290

Weight g 4 6 8 12 23 38 58 83 115 150 200 270 375 540 850 1400

Spherical Plain Bearings Series K - Stainless Series

GLRS

Spherical Plain Bearings with outer ring made from stainless steel and regreasable

For use at high revs in corrosive environments

Size (D) 31) 2) 5 6 8 10 12 14 16 18 20 22 25 30 35 40

B 6 8 9 12 14 16 19 21 23 25 28 31 37 43 49

M 4,50 6,00 6,75 9,00 10,50 12,00 13,50 15,00 16,50 18,00 20,00 22,00 25,00 28,00 35,00

A

O

Static load Co kN

Dynamic load C kN

Limiting speed rev/min

12 16 18 22 26 30 34 38 42 46 50 56 66 78 87

5,1 7,7 8,9 10,4 12,9 15,4 16,8 19,3 21,8 24,3 25,8 29,6 34,8 37,7 44,2

10,8 19,8 25,8 42,6 60,0 80,0 102,5 128,5 157,0 188,5 229,0 293,0 381,0 480,0 693,0

1,8 3,3 4,3 7,1 10,0 13,5 17,0 21,5 26,0 31,5 38,0 47,0 64,0 80,0 116,0

1200 1500 1200 1000 860 750 660 600 540 500 440 370 330 290

Weight g 5 8 12 23 38 58 83 115 150 200 270 375 540 850 1400

Materials: Outer ring:

Stainless steel to 1.4305, Aisi 303, turned

Insert:

Special high strength bronze to CuSn8

Ball:

Bearing steel to 100Cr6, Aisi 52100, hardened, ground, polished, hard chrome plated on the running surface

On request: Ball made from stainless steel to 1.4034, Aisi 420C, hardened, ground, polished This series is also available with threaded bolt (see page 39). 1) 2)

without lubrication hole Outer Ring as one piece to CuSn8

FLURO-Gelenklager GmbH

43

Spherical Plain Bearings Series K - Maintenance Free Series

GLXSW

Spherical Plain Bearings with outer ring made from free-cutting steel, zinc plated and maintenance free

For use at higher dynamic pressure and tension loads.

B

41) 5 6 8 10 12 14 16 18 20 22 25 30 35 40

7 8 9 12 14 16 19 21 23 25 28 31 37 43 49

M 5,25 6,00 6,75 9,00 10,50 12,00 13,50 15,00 16,50 18,00 20,00 22,00 25,00 28,00 35,00

A

O

Static load Co kN

Dynamic load C kN

14 16 18 22 26 30 34 38 42 46 50 56 66 78 87

6,5 7,7 8,9 10,4 12,9 15,4 16,8 19,3 21,8 24,3 25,8 29,6 34,8 37,7 44,2

9,5 12,5 15,5 27,8 39,0 53,5 70,0 88,0 106,5 130,0 162,0 204,0 281,0 343,0 495,0

5,7 7,5 9,3 16,7 23,4 32,0 42,0 52,5 64,0 78,0 97,0 122,0 168,0 206,0 286,0

Limiting speed rev/min 700 600 530 420 350 300 260 230 210 190 170 150 130 110 100

Weight g only for short-term revolutions recommended

Size (D)

5 8 12 23 38 58 83 115 150 200 270 375 540 850 1400

Materials: Outer ring: Free-cutting steel to 9SMnPb28K, 12L13, turned Insert:

Free-cutting steel to 9SMnPb28K, 12L13, zinc plated with PTFE liner bonded to the inner surface

Ball:

Bearing steel to 100Cr6, Aisi 52100, hardened, ground, polished

This series is also available with threaded bolt (see page 39). 1)

44

Outer Ring as one piece to 45S20

FLURO-Gelenklager GmbH

Spherical Plain Bearings Series K - Stainless, Maintenance Free Series

GLRSW

Spherical Plain Bearings with outer ring made from stainless steel, maintenance free

For use at higher dynamic pressure and tension loads in corrosive environments

B

M

A

O

Static load Co kN

Dynamic load C kN

41) 5 6 8 10 12 14 16 18 20 22 25 30 35 40

7 8 9 12 14 16 19 21 23 25 28 31 37 43 49

5,25 6,00 6,75 9,00 10,50 12,00 13,50 15,00 16,50 18,00 20,00 22,00 25,00 28,00 35,00

14 16 18 22 26 30 34 38 42 46 50 56 66 78 87

6,5 7,7 8,9 10,4 12,9 15,4 16,8 19,3 21,8 24,3 25,8 29,6 34,8 37,7 44,2

9,5 12,5 15,5 27,8 39.0 53,5 70,0 88,0 106,5 130,0 162,0 204,0 281,0 343,0 495,0

5,7 7,5 9,3 16,7 23,4 32,0 42,0 52,5 64,0 78,0 97,0 122,0 168,0 206,0 286,0

Limiting speed rev/min 700 600 530 420 350 300 260 230 210 190 170 150 130 110 100

Weight g only for short-term revolutions recommended

Size (D)

5 8 12 23 38 58 83 115 150 200 270 375 540 850 1400

Materials: Outer ring: Stainless steel to 1.4305, Aisi 303, turned Insert:

Special high strength bronze to CuSn8 with PTFE liner bonded to the inner surface

Ball:

Bearing steel to 100Cr6, Aisi 52100, hardened, ground, polished, hard chrome plated on the running surface

On request: Insert: Stainless steel to 1.4571, Aisi 316Ti Ball: Stainless steel to 1.4034, Aisi 420C hardened, ground, polished or in stainless steel to 1.4401, Aisi 316 / 1.4404, Aisi 316L ground, polished This series is also available with threaded bolt (see page 39). 1)

Outer Ring stainless steel as one piece to 1.4305, Aisi303

FLURO-Gelenklager GmbH

45

Spherical Plain Bearings Series K - Heavy Duty Series

GXS

Spherical Plain Bearings, without outer ring, regreasable

For use at high revs

Size

D

21) 31) 41) 51) 6 6.16 8 8.19 10 10.22 12 12.26 14 14.29 16 16.32 18 18.35 20 20.40 22 22.42 25 25.47 30 30.55 35 35.65 40 40.75 50

2 3 4 5 6 6 8 8 10 10 12 12 14 14 16 16 18 18 20 20 22 22 25 25 30 30 35 35 40 40 50

B

M

A

O

Static load Co kN

Dynamic load C kN

4,5 6,0 7,0 8,0 9,0 9,0 12,0 12,0 14,0 14,0 16,0 16,0 19,0 19,0 21,0 21,0 23,0 23,0 25,0 25,0 28,0 28,0 31,0 31,0 37,0 37,0 43,0 43,0 49,0 49,0 60,0

3,60 4,50 5,25 6,00 6,75 6,75 9,00 9,00 10,50 10,50 12,00 12,00 13,50 13,50 15,00 15,00 16,50 16,50 18,00 18,00 20,00 20,00 22,00 22,00 25,00 25,00 28,00 28,00 35,00 35,00 45,00

6,5 9,0 12,0 13,0 15,0 16,0 18,0 19,0 21,0 22,0 24,5 26,0 28,0 29,0 31,5 32,0 34,5 35,0 38,0 40,0 41,0 42,0 46,0 47,0 54,0 55,0 62,0 65,0 72,0 75,0 90,0

2,6 5,1 6,5 7,7 8,9 8,9 10,4 10,4 12,9 12,9 15,4 15,4 16,8 16,8 19,3 19,3 21,8 21,8 24,3 24,3 25,8 25,8 29,6 29,6 34,8 34,8 37,7 37,7 44,2 44,2 55,9

6,6 10,8 14,5 19,8 25,8 25,8 42,6 42,6 60,0 60,0 80,0 80,0 102,5 102,5 128,5 128,5 157,0 157,0 188,5 188,5 229,0 229,0 293,0 293,0 381,0 381,0 480,0 480,0 693,0 693,0 1100,0

1,1 1,8 2,5 3,3 4,3 4,3 7,1 7,1 10,0 10,0 13,5 13,5 17,0 17,0 21,5 21,5 26,0 26,0 31,5 31,5 38,0 38,0 47,0 47,0 64,0 64,0 80,0 80,0 116,0 116,0 185,0

Materials:

Insert: Special high strength bronze to CuSn8 Ball: Bearing steel to 100Cr6, Aisi 52100, hardened, ground, polished This series is also available with threaded bolt (see page 39) and as stainless steel version. 1) without lubrication hole

46

FLURO-Gelenklager GmbH

Limiting speed rev/min

1500 1500 1200 1200 1000 1000 860 860 750 750 660 660 600 600 540 540 500 500 440 440 370 370 330 330 290 290 230

Weight g 3 4 4 5 8 9 14 16 22 25 35 40 51 56 72 76 94 97 124 141 158 168 218 231 349 362 502 518 832 850 1600

Spherical Plain Bearings Series K - Maintenance Free Series

GXSW

Spherical Plain Bearings, without outer ring, maintenance free

For use at high pressure and dynamic loads

D

B

M

A

O

Static load Co kN

Dynamic load C kN

Limiting speed rev/min

Weight g

4 5 6 6.16 8 8.19 10 10.22 12 12.26 14 14.29 16 16.32 18 18.35 20 20.40 22 22.42 25 25.47 30 30.55 35 35.65 40 40.75 50

4 5 6 6 8 8 10 10 12 12 14 14 16 16 18 18 20 20 22 22 25 25 30 30 35 35 40 40 50

7 8 9 9 12 12 14 14 16 16 19 19 21 21 23 23 25 25 28 28 31 31 37 37 43 43 49 49 60

5,25 6,00 6,75 6,75 9,00 9,00 10,50 10,50 12,00 12,00 13,50 13,50 15,00 15,00 16,50 16,50 18,00 18,00 20,00 20,00 22,00 22,00 25,00 25,00 28,00 28,00 35,00 35,00 45,00

12,0 13,0 15,0 16,0 18,0 19,0 21,0 22,0 24,5 26,0 28,0 29,0 31,5 32,0 34,5 35,0 38,0 40,0 41,0 42,0 46,0 47,0 54,0 55,0 62,0 65,0 72,0 75,0 90,0

6,5 7,7 8,9 8,9 10,4 10,4 12,9 12,9 15,4 15,4 16,8 16,8 19,3 19,3 21,8 21,8 24,3 24,3 25,8 25,8 29,6 29,6 34,8 34,8 37,7 37,7 44,2 44,2 55,9

8,5 12,5 15,5 15,5 27,8 27,8 39,0 39,0 53,5 53,5 70,0 70,0 88,0 88,0 106,5 106,5 130,0 130,0 162,0 162,0 204,0 204,0 281,0 281,0 343,0 343,0 495,0 495,0 800,0

5,1 7,5 9,3 9,3 16,7 16,7 23,4 23,4 32,0 32,0 42,0 42,0 52,5 52,5 64,0 64,0 78,0 78,0 97,0 97,0 122,0 122,0 168,0 168,0 206,0 206,0 286,0 286,0 485,0

700 600 530 530 420 420 350 350 300 300 260 260 230 230 210 210 190 190 170 170 150 150 130 130 110 110 100 100 80

4 6 8 9 15 17 23 26 35 41 52 56 72 75 95 97 127 142 159 169 222 230 350 369 505 545 832 894 1640

only for short-term revolutions recommended

Size

Materials: Insert: Ball:

Free-cutting steel to 9SMnPb28K, 12L13, with PTFE liner bonded to inner surface Bearing steel to 100Cr6, Aisi 52100, hardened, ground, polished

This series is also available with threaded bolt (see page 39) and as stainless steel version.

FLURO-Gelenklager GmbH

47

Spherical Plain Bearings Series E - Maintenance Free Series GE...EC (-2RS)

dK

Spherical Plain Bearings, steel running on PTFE, maintenance free

For use at high unidirectional loads

Size (D) 4 5 6 8 10 12 15 16 17 20 25 30 35 40 45 50 55 60 70 80 90 100 110 120 140 1) 160 1) 180 1) 200 1) 220 1) 240 1) 260 1) 280 1) 300 1)

0 -0,008 0 -0,008 0 -0,008 0 -0,008 0 -0,008 0 -0,008 0 -0,008 0 -0,008 0 -0,008 0 -0,010 0 -0,010 0 -0,010 0 -0,012 0 -0,012 0 -0,012 0 -0,012 0 -0,015 0 -0,015 0 -0,015 0 -0,015 0 -0,020 0 -0,020 0 -0,020 0 -0,020 0 -0,025 0 -0,025 0 -0,025 0 -0,030 0 -0,030 0 -0,030 0 -0,035 0 -0,035 0 -0,035

Materials:

B

M

5 6 6 8 9 10 12 14 14 16 20 22 25 28 32 35 40 44 49 55 60 70 70 85 90 105 105 130 135 140 150 155 165

3 4 4 5 6 7 9 10 10 12 16 18 20 22 25 28 32 36 40 45 50 55 55 70 70 80 80 100 100 100 110 120 120

A 12 14 14 16 19 22 26 30 30 35 42 47 55 62 68 75 85 90 105 120 130 150 160 180 210 230 260 290 320 340 370 400 430

0 -0,008 0 -0,008 0 -0,008 0 -0,008 0 -0,009 0 -0,009 0 -0,009 0 -0,009 0 -0,009 0 -0,011 0 -0,011 0 -0,011 0 -0,013 0 -0,013 0 -0,013 0 -0,013 0 -0,015 0 -0,015 0 -0,015 0 -0,015 0 -0,018 0 -0,018 0 -0,025 0 -0,025 0 -0,030 0 -0,030 0 -0,035 0 -0,035 0 -0,040 0 -0,040 0 -0,040 0 -0,040 0 -0,045

O

dK

6,0 8,0 8,0 10,2 13,2 14,9 18,4 20,7 20,7 24,1 29,3 34,2 39,7 45,0 50,7 55,9 62,3 66,8 77,8 89,4 98,1 109,5 121,2 135,5 155,8 170,2 198,9 213,5 239,5 265,3 288,3 313,8 336,7

8,0 10,0 10,0 13,0 16,0 18,0 22,0 25,0 25,0 29,0 35,5 40,7 47,0 53,0 60,0 66,0 74,0 80,0 92,0 105,0 115,0 130,0 140,0 160,0 180,0 200,0 225,0 250,0 275,0 300,0 325,0 350,0 375,0

Static load Co kN

Static load Co kN -2RS

Dynamic load C kN

Dynamic load C kN -2RS

Pivoting angle α

Weight g

5,4 9,1 9,1 14,0 21,0 28,0 45,0 56,0 56,0 78,0 127,0 166,0 211,0 262,0 337,0 415,0 -

59,0 56,0 75,0 104,0 204,0 263,0 338,0 419,0 540,0 665,0 852,0 1030,0 1320,0 1700,0 2070,0 2570,0 2770,0 4030,0 4530,0 5760,0 6480,0 9000,0 9900,0 10800,0 12870,0 15120,0 16200,0

2,1 3,6 3,6 5,8 8,6 11,0 18,0 22,0 22,0 31,0 51,0 65,0 84,0 104,0 135,0 166,0 -

17,5 22,5 22,5 31,5 51,0 66,0 140,0 185,0 240,0 295,0 355,0 460,0 590,0 750,0 920,0 1145,0 1230,0 1790,0 2010,0 2560,0 2880,0 4000,0 4400,0 4800,0 5700,0 6700,0 7200,0

16 13 13 15 12 11 8 10 10 9 7 6 6 7 7 6 7 6 6 6 5 7 6 6 7 8 6 7 8 8 7 6 7

3 4 4 7 11 17 26 40 40 64 115 149 228 318 421 562 864 1030 1570 2320 2790 4440 4830 8110 11200 14100 18500 28400 35700 39700 51500 64900 77600

Insert: Bearing steel to 100Cr6, Aisi 52100, with PTFE liner, bonded to the inner surface from size 15 available sealed from both sides (-2RS) from size 35 only sealed from both sides (-2RS) from size 4 to 50 when without seal, bearing steel C45/Aisi 1045 with PTFE liner, bonded to the inner surface Ball: Bearing steel to 100Cr6, Aisi 52100, hardened, ground, polished, hard chrome plated

48

FLURO-Gelenklager GmbH

1) from size 140 the

hardened inserts are two pieced and secured with tension spring

Spherical Plain Bearings Series E - Stainless, Maintenance Free Series

GE...EC-NIRO

dK

Spherical Plain Bearings stainless steel running on PTFE, maintenance free

For use at high unidirectional loads in corrosive environments

Size (D) 6 8 10 12 15 16 17 20 25 30 35 40 45 50 60 70 80 90 100 110 120

0 -0,008 0 -0,008 0 -0,008 0 -0,008 0 -0,008 0 -0,008 0 -0,008 0 -0,010 0 -0,010 0 -0,010 0 -0,012 0 -0,012 0 -0,012 0 -0,012 0 -0,015 0 -0,015 0 -0,015 0 -0,020 0 -0,020 0 -0,020 0 -0,020

B

M

6 8 9 10 12 14 14 16 20 22 25 28 32 35 44 49 55 60 70 70 85

4 5 6 7 9 10 10 12 16 18 20 22 25 28 36 40 45 50 55 55 70

A 14 16 19 22 26 30 30 35 42 47 55 62 68 75 90 105 120 130 150 160 180

0 -0,008 0 -0,008 0 -0,009 0 -0,009 0 -0,009 0 -0,009 0 -0,009 0 -0,011 0 -0,011 0 -0,011 0 -0,013 0 -0,013 0 -0,013 0 -0,013 0 -0,015 0 -0,015 0 -0,015 0 -0,018 0 -0,018 0 -0,025 0 -0,025

O

dK

8,0 10,2 13,2 14,9 18,4 20,7 20,7 24,2 29,3 34,2 39,8 45,0 50,8 56,0 66,8 77,9 89,4 98,1 109,5 121,2 135,5

10,0 13,0 16,0 18,0 22,0 25,0 25,0 29,0 35,5 40,7 47,0 53,0 60,0 66,0 80,0 92,0 105,0 115,0 130,0 140,0 160,0

Static load Co kN 9,0 15,6 23,4 32,0 50,0 65,0 65,0 90,5 159,0 197,0 298,0 370,6 481,0 598,0 935,0 1204,0 1540,0 1892,0 2366,0 2548,0 3752,0

Dynamic load C kN

Pivoting angle α

Weight g

4 7 10 14 30 39 39 54 96 118 153 190 247 308 481 619 792 1080 1350 1460 2140

13 15 12 11 8 10 10 9 7 6 6 7 7 6 6 6 6 5 7 6 6

4 7 11 16 26 49 38 61 110 140 220 300 400 540 1000 1500 2200 2700 4400 4700 8000

Materials: Insert:

Stainless steel to 1.4571, Aisi 316Ti, with PTFE liner bonded to the inner surface from size 90 with high performance PTFE compound

Ball:

stainless steel to 1.4125, Aisi 440C / 1.4112, Aisi 440B, hardened, ground, polished

On request:

size 140 and 160 from size 40 with -2RS seals

FLURO-Gelenklager GmbH

49

Rod Ends Series E - Steel on Steel EI (-2RS)

Series

Rod Ends with female thread made from freecutting or heat-treated steel, zinc plated, with steel on steel Spherical Plain Bearings which require lubrication For use at high multidirectional loads and limited fitting dimensions

Size (D)

B

M

A

F

L

K

J

6 8 10 12 15 16 17 20 25 30 35 40 45 50 60 70 80

6 8 9 10 12 14 14 16 20 22 25 28 32 35 44 49 55

4,4 6,0 7,0 8,0 10,0 11,0 11,0 13,0 17,0 19,0 21,0 23,0 27,0 30,0 38,0 42,0 47,0

21 24 29 34 40 46 46 53 64 73 82 92 102 112 135 160 180

30 36 43 50 61 67 67 77 94 110 125 142 145 160 175 200 230

40,0 48,0 57,0 67,0 81,0 90,0 90,0 103,5 126,0 146,5 166,0 188,0 196,0 216,0 242,5 280,0 320,0

13 16 19 22 26 30 30 35 42 50 58 65 70 75 88 98 110

10,0 12,5 15,0 17,5 21,0 24,0 24,0 27,5 33,5 40,0 47,0 52,0 58,0 62,0 70,0 80,0 95,0

O

G

GL

Static load Co kN

Dynamic load C kN

Pivoting angle α

M6 M8 M 10 M 12 M 14 M 16 M 16 M 20x1,5 M 24x2 M 30x2 M 36x3 M 39x3 M 42x3 M 45x3 M 52x3 M 56x4 M 64x4

12 16 20 23 29 33 33 40 48 56 60 65 65 68 70 80 85

10,3 15,8 23,4 31,0 42,5 54,5 54,5 62,5 92,0 124,0 144,0 178,0 240,0 290,0 450,0 610,0 695,0

3,4 5,5 8,1 10,8 17,0 21,2 21,2 30,0 48,0 62,0 80,0 100,0 127,0 156,0 245,0 315,0 400,0

13 15 12 11 8 10 10 9 7 6 6 7 7 6 6 6 6

SW

8,0 11 10,2 14 13,2 17 14,9 19 18,4 22 20,7 27 20,7 27 24,2 32 29,3 36 34,2 41 39,8 50 45,0 55 50,8 60 56,0 65 66,8 75 77,9 85 89,4 100

Materials:

50

Housing:

up to size 10 turned, from free-cutting steel to 9SMnPb28K, 12L13 from size 12 forged from heat-treated steel to C45, Aisi 1045

Bearing:

Steel on steel bearing GE...E, requiring lubrication (see page 56) from size 20 available sealed from both sides (-2RS)

Greasing:

up to size 17 without lubrication fitting from size 20 fitted with hydraulic grease nipples to DIN 71412

FLURO-Gelenklager GmbH

Weight g 21 38 60 96 180 220 220 350 640 930 1300 2000 2500 3500 5550 8600 12000

Rod Ends Series E - Steel on Steel Series

EA (-2RS)

Rod Ends with male thread made from freecutting or heat-treated steel, zinc plated, with steel on steel Spherical Plain Bearings which require lubrication For use at high multidirectional loads and limited fitting dimensions

Size (D)

B

M

A

F

L

O

G

GL

Static load Co kN

Dynamic load C kN

Pivoting angle α

6 8 10 12 15 16 17 20 25 30 35 40 45 50 60 70 80

6 8 9 10 12 14 14 16 20 22 25 28 32 35 44 49 55

4,4 6,0 7,0 8,0 10,0 11,0 11,0 13,0 17,0 19,0 21,0 23,0 27,0 30,0 38,0 42,0 47,0

21 24 29 34 40 46 46 53 64 73 82 92 102 112 135 160 180

36 42 48 54 63 69 69 78 94 110 140 150 163 185 210 235 270

46,0 54,0 62,0 71,0 83,0 92,0 92,0 104,5 126,0 146,5 181,0 196,0 214,0 241,0 277,5 315,0 360,0

8,0 10,2 13,2 14,9 18,4 20,7 20,7 24,2 29,3 34,2 39,8 45,0 50,8 56,0 66,8 77,9 89,4

M6 M8 M 10 M 12 M 14 M 16 M 16 M 20x1,5 M 24x2 M 30x2 M 36x3 M 39x3 M 42x3 M 45x3 M 52x3 M 56x4 M 64x4

18 22 26 28 34 36 36 43 53 65 82 86 94 107 115 125 140

6,9 12,7 19,9 29,0 39,5 54,0 54,0 62,5 92,0 124,0 144,0 178,0 259,0 313,0 485,0 564,0 689,0

3,4 5,5 8,1 10,8 17,0 21,2 21,2 30,0 48,0 62,0 80,0 100,0 127,0 156,0 245,0 315,0 400,0

13 15 12 11 8 10 10 9 7 6 6 7 7 6 6 6 6

Weight g 16 28 50 86 140 190 190 320 560 890 1400 1800 2610 3450 5900 8200 12000

Materials: Housing:

up to size 10 turned, from free-cutting steel to 9SMnPb28K, 12L13 from size 12 forged from heat-treated steel to C45, Aisi 1045

Bearing:

Steel on steel bearing GE...E, requiring lubrication (see page 56) from size 20 available sealed from both sides (-2RS)

Greasing:

up to size 17 without lubrication fitting from size 20 fitted with hydraulic grease nipples to DIN 71412

FLURO-Gelenklager GmbH

51

Rod Ends Series E - Maintenance Free Series EI..D

(-2RS)

Rod Ends with female thread made from freecutting or heat-treated steel, zinc plated with maintenance free Spherical Plain Bearings

For use at high unidirectional loads and limited fitting dimensions

Size (D)

B

M

A

F

L

K

J

6 8 10 12 15 16 17 20 25 30 35 40 45 50 60 70 80

6 8 9 10 12 14 14 16 20 22 25 28 32 35 44 49 55

4,4 6,0 7,0 8,0 10,0 11,0 11,0 13,0 17,0 19,0 21,0 23,0 27,0 30,0 38,0 42,0 47,0

21 24 29 34 40 46 46 53 64 73 82 92 102 112 135 160 180

30 36 43 50 61 67 67 77 94 110 125 142 145 160 175 200 230

40,0 48,0 57,0 67,0 81,0 90,0 90,0 103,5 126,0 146,5 166,0 188,0 196,0 216,0 242,5 280,0 320,0

13 16 19 22 26 30 30 35 42 50 58 65 70 75 88 98 110

10,0 12,5 15,0 17,5 21,0 24,0 24,0 27,5 33,5 40,0 47,0 52,0 58,0 62,0 70,0 80,0 95,0

O

G

GL

Static load Co kN

Dynamic load C kN

Pivoting angle α

M6 M8 M 10 M 12 M 14 M 16 M 16 M 20x1,5 M 24x2 M 30x2 M 36x3 M 39x3 M 42x3 M 45x3 M 52x3 M 56x4 M 64x4

12 16 20 23 29 33 33 40 48 56 60 65 65 68 70 80 85

10,3 15,8 23,4 31,0 42,5 54,5 54,5 62,5 92,0 124,0 144,0 178,0 240,0 290,0 450,0 610,0 695,0

3,6 5,8 8,6 11,5 17,5 22,5 22,5 31,5 51,0 66,0 140,0 185,0 240,0 295,0 460,0 590,0 750,0

13 15 12 11 8 10 10 9 7 6 6 7 7 6 6 6 6

SW

8,0 11 10,2 14 13,2 17 14,9 19 18,4 22 20,7 27 20,7 27 24,2 32 29,3 36 34,2 41 39,8 50 45,0 55 50,8 60 56,0 65 66,8 75 77,9 85 89,4 100

Weight g 21 38 60 96 180 220 220 350 640 930 1300 2000 2500 3500 5550 8600 12000

Materials: Housing:

up to size 10 turned, from free-cutting steel to 9SMnPb28K, 12L13 from size 12 forged, from heat-treated steel to C45, Aisi 1045

Bearing:

maintenance free steel/PTFE bearing GE...EC (see page 48) from size 20 available sealed from both sides (-2RS) from size 35 only available sealed from both sides (-2RS)

!

52

Please note: The dynamic load "C" of the bearing of some rod ends is in some sizes higher than the static load "Co" of the rod end.

FLURO-Gelenklager GmbH

Rod Ends Series E - Maintenance Free Series EA..D

(-2RS)

Rod Ends with male thread made from freecutting or heat-treated steel, zinc plated with maintenance free Spherical Plain Bearings

For use at high unidirectional loads and limited fitting dimensions

Size (D)

B

M

A

F

L

O

G

GL

Static load Co kN

Dynamic load C kN

Pivoting angle α

6 8 10 12 15 16 17 20 25 30 35 40 45 50 60 70 80

6 8 9 10 12 14 14 16 20 22 25 28 32 35 44 49 55

4,4 6,0 7,0 8,0 10,0 11,0 11,0 13,0 17,0 19,0 21,0 23,0 27,0 30,0 38,0 42,0 47,0

21 24 29 34 40 46 46 53 64 73 82 92 102 112 135 160 180

36 42 48 54 63 69 69 78 94 110 140 150 163 185 210 235 270

46,0 54,0 62,0 71,0 83,0 92,0 92,0 104,5 126,0 146,5 181,0 196,0 214,0 241,0 277,5 315,0 360,0

8,0 10,2 13,2 14,9 18,4 20,7 20,7 24,2 29,3 34,2 39,8 45,0 50,8 56,0 66,8 77,9 89,4

M6 M8 M 10 M 12 M 14 M 16 M 16 M 20x1,5 M 24x2 M 30x2 M 36x3 M 39x3 M 42x3 M 45x3 M 52x3 M 56x4 M 64x4

18 22 26 28 34 36 36 43 53 65 82 86 94 107 115 125 140

6,9 12,7 19,9 29,0 39,5 54,0 54,0 62,5 92,0 124,0 144,0 178,0 240,0 290,0 450,0 610,0 750,0

3,6 5,8 8,6 11,5 17,5 22,5 22,5 31,5 51,0 66,0 140,0 185,0 240,0 295,0 460,0 590,0 750,0

13 15 12 11 8 10 10 9 7 6 6 7 7 6 6 6 6

Weight g 16 28 50 86 140 190 190 320 560 890 1400 1800 2610 3450 5900 8200 12000

Materials: Housing:

up to size 10 turned, from free-cutting steel to 9SMnPb28K, 12L13 from size 12 forged, from heat-treated steel to C45, Aisi 1045

Bearing:

maintenance free steel/PTFE bearing GE...EC (see page 48) from size 20 available sealed from both sides (-2RS) from size 35 only available sealed from both sides (-2RS)

!

Please note: The dynamic load "C" of the bearing of some rod ends is in some sizes higher than the static load "Co" of the rod end.

FLURO-Gelenklager GmbH

53

Rod Ends Series E - Stainless, Maintenance Free EI..D-NIRO

Series

Rod Ends with female thread, maintenance free, made from stainless steel with maintenance free Spherical Plain Bearings GE..EC-NIRO For use at high unidirectional loads, in corrosive environments and limited fitting dimensions

Size (D)

B

M

6 8 10 12 15 16 17 20 25 30 35 40 451) 50 601) 701) 801)

6 8 9 10 12 14 14 16 20 22 25 28 32 35 44 49 55

4,4 6,0 7,0 8,0 10,0 11,0 11,0 13,0 17,0 19,0 21,0 23,0 27,0 30,0 38,0 42,0 47,0

A 21 24 29 34 40 46 46 53 64 73 82 92 102 112 135 160 180

F

L

K

J

30 36 43 50 61 67 67 77 94 110 125 142 145 160 175 200 230

40,0 48,0 57,0 67,0 81,0 90,0 90,0 103,5 126,0 146,5 166,0 188,0 196,0 216,0 242,5 280,0 320,0

13 16 19 22 26 30 30 35 42 50 58 65 70 75 88 98 110

10,0 12,5 15,0 17,5 21,0 24,0 24,0 27,5 33,5 40,0 47,0 52,0 58,0 62,0 70,0 80,0 95,0

O

G

GL

Static load Co kN

Dynamic load C kN

Pivoting angle α

M6 M8 M 10 M 12 M 14 M 16 M 16 M 20x1,5 M 24x2 M 30x2 M 36x3 M 39x3 M 42x3 M 45x3 M 52x3 M 56x4 M 64x4

12 16 20 23 29 33 33 40 48 56 60 65 65 68 70 80 85

6,0 9,2 13,6 18,0 26,5 34,0 34,0 45,0 73,0 97,0 111,0 135,0 178,0 216,0 336,0 459,0 570,0

4 7 10 14 30 39 39 54 96 118 153 190 247 308 481 619 792

13 15 12 11 8 10 10 9 7 6 6 7 7 6 6 6 6

SW

8,0 11 10,2 14 13,2 17 14,9 19 18,4 22 20,7 27 20,7 27 24,2 32 29,3 36 34,2 41 39,8 50 45,0 55 50,8 60 56,0 65 66,8 75 77,9 85 89,4 100

Materials: Housing:

from size 6 to 40 stainless steel to 1.4301, Aisi 304, forged, polished from size 45 stainless steel to 1.4301, Aisi 304, turned from size 50 stainless steel to 1.4571, Aisi 316Ti, turned

Bearing:

Maintenance free stainless steel Spherical Plain Bearing GE...EC-NIRO (see page 49)

On request from size 40 available with 2RS seals 1)

54

availability and price on request

FLURO-Gelenklager GmbH

Weight g 21 38 60 96 180 220 220 350 640 930 1300 2000 2500 3500 5550 8600 12000

Rod Ends Series E - Stainless, Maintenance Free Series

EA..D-NIRO

Rod Ends with male thread, maintenance free, made from stainless steel with maintenance free Spherical Plain Bearings GE..EC-NIRO For use at high unidirectional loads, in corrosive environments and limited fitting dimensions

Size (D)

B

M

A

F

L

O

6 8 10 12 15 16 17 20 25 30 35 40 451) 50 601) 701) 801)

6 8 9 10 12 14 14 16 20 22 25 28 32 35 44 49 55

4,4 6,0 7,0 8,0 10,0 11,0 11,0 13,0 17,0 19,0 21,0 23,0 27,0 30,0 38,0 42,0 47,0

21 24 29 34 40 46 46 53 64 73 82 92 102 112 135 160 180

36 42 48 54 63 69 69 78 94 110 140 150 163 185 210 235 270

46,0 54,0 62,0 71,0 83,0 92,0 92,0 104,5 126,0 146,5 181,0 196,0 214,0 241,0 277,5 315,0 360,0

8,0 10,2 13,2 14,9 18,4 20,7 20,7 24,2 29,3 34,2 39,8 45,0 50,8 56,0 66,8 77,9 89,4

M M M M M M M M M M M M M M M M M

G

GL

Static load Co kN

6 8 10 12 14 16 16 20x1,5 24x2 30x2 36x3 39x3 42x3 45x3 52x3 56x4 64x4

18 22 26 28 34 36 36 43 53 65 82 86 94 107 115 125 140

4,0 7,4 11,6 17,0 23,0 31,5 31,5 45,0 73,0 97,0 111,0 135,0 178,0 216,0 336,0 429,0 570,0

Dynamic load C kN 4 7 10 14 30 39 39 54 96 118 153 190 247 308 481 619 792

Pivoting angle α 13 15 12 11 8 10 10 9 7 6 6 7 7 6 6 6 6

Weight g 16 28 50 86 140 190 190 320 570 890 1400 1800 2610 3450 5900 8200 12000

Materials: Housing:

from size 6 to 40 stainless steel to 1.4301, Aisi 304, forged, polished from size 45 stainless steel to 1.4301, Aisi 304, turned from size 50 stainless steel to 1.4571, Aisi 316Ti, turned

Bearing:

Maintenance free stainless steel Spherical Plain Bearing GE...EC-NIRO (see page 49)

On request from size 40 available with 2RS seals 1)

availability and price on request

FLURO-Gelenklager GmbH

55

Spherical Plain Bearings Series E - Steel on Steel Series GE...E (-2RS)

dK

Spherical Plain Bearings steel on steel, treated with molybdenum disulphide mos2, regreasable

For use with high multidirectional loads

Size (D) 41) 51) 61) 81) 101) 121) 15 162) 17 20 25 30 35 40 45 50 55 60 70 80 90 100 110 120 140 160 180 200 220 240 260 280 300

0 -0,008 0 -0,008 0 -0,008 0 -0,008 0 -0,008 0 -0,008 0 -0,008 0 -0,008 0 -0,008 0 -0,010 0 -0,010 0 -0,010 0 -0,012 0 -0,012 0 -0,012 0 -0,012 0 -0,015 0 -0,015 0 -0,015 0 -0,015 0 -0,020 0 -0,020 0 -0,020 0 -0,020 0 -0,025 0 -0,025 0 -0,025 0 -0,030 0 -0,030 0 -0,030 0 -0,035 0 -0,035 0 -0,035

Materials:

B

M

5 6 6 8 9 10 12 14 14 16 20 22 25 28 32 35 40 44 49 55 60 70 70 85 90 105 105 130 135 140 150 155 165

3 4 4 5 6 7 9 10 10 12 16 18 20 22 25 28 32 36 40 45 50 55 55 70 70 80 80 100 100 100 110 120 120

A 12 14 14 16 19 22 26 30 30 35 42 47 55 62 68 75 85 90 105 120 130 150 160 180 210 230 260 290 320 340 370 400 430

O 0 -0,008 0 -0,008 0 -0,008 0 -0,008 0 -0,009 0 -0,009 0 -0,009 0 -0,009 0 -0,009 0 -0,011 0 -0,011 0 -0,011 0 -0,013 0 -0,013 0 -0,013 0 -0,013 0 -0,015 0 -0,015 0 -0,015 0 -0,015 0 -0,018 0 -0,018 0 -0,025 0 -0,025 0 -0,030 0 -0,030 0 -0,035 0 -0,035 0 -0,040 0 -0,040 0 -0,040 0 -0,040 0 -0,045

6,0 8,0 8,0 10,2 13,2 14,9 18,4 20,7 20,7 24,1 29,3 34,2 39,7 45,0 50,7 55,9 62,3 66,8 77,8 89,4 98,1 109,5 121,2 135,5 155,8 170,2 198,9 213,5 239,5 265,3 288,3 313,8 336,7

dK 8,0 10,0 10,0 13,0 16,0 18,0 22,0 25,0 25,0 29,0 35,5 40,7 47,0 53,0 60,0 66,0 74,0 80,0 92,0 105,0 115,0 130,0 140,0 160,0 180,0 200,0 225,0 250,0 275,0 300,0 325,0 350,0 375,0

Static load Co kN 10,0 17,0 17,0 27,5 40,5 54,0 85,0 106,0 106,0 146,0 240,0 310,0 400,0 500,0 640,0 780,0 1000,0 1220,0 1560,0 2000,0 2450,0 3050,0 3250,0 4750,0 5400,0 6800,0 7650,0 10600,0 11600,0 12700,0 15300,0 18000,0 19000,0

Dynamic load C kN 2,0 3,4 3,4 5,5 8,1 10,8 17,0 21,2 21,2 30,0 48,0 62,0 80,0 100,0 127,0 156,0 200,0 245,0 315,0 400,0 490,0 610,0 655,0 950,0 1080,0 1370,0 1530,0 2120,0 2320,0 2550,0 3050,0 3550,0 3800,0

Insert: Bearing steel to 100Cr6, Aisi 52100, hardened, ground, phosphated, treated with molybdenum disulphide Ball: 56

from size 15 available sealed from both sides (-2RS) from size 220 only available sealed from both sides (-2RS) Bearing steel to 100Cr6, Aisi 52100, hardened, ground, phosphated, treated with molybdenum disulphide

FLURO-Gelenklager GmbH

Pivoting angle α 16 13 13 15 12 11 8 10 10 9 7 6 6 7 7 6 7 6 6 6 5 7 6 6 7 8 6 7 8 8 7 6 7 1) 2)

Weight g 3 4 4 7 11 17 26 40 40 64 115 149 228 318 421 562 864 1030 1570 2320 2790 4440 4830 8110 11200 14100 18500 28400 35700 39700 51500 64900 77600

without lubrication hole also available with outside diameter 28 mm

Spherical Plain Bearings - Steel on Steel Series GE...HO-2RS

dK

Spherical Plain Bearings steel on steel, regreasable with lip seal on both sides. Dimensions identical to series GE...E (-2RS) but ball with shoulder Through the ball with shoulder no distance rings are required

Size (D) 0 16 2) -0,008 0 17 -0,008 0 20 -0,010 0 25 -0,010 0 30 -0,010 0 35 -0,012 0 40 -0,012 0 45 -0,012 0 50 -0,012 0 60 -0,015 0 70 -0,015 0 80 -0,015 0 90 1) -0,020 0 100 1) -0,020 0 120 1) -0,020

B 21 21 24 29 30 35 38 40 43 54 65 74 80 90 108

M 10 10 12 16 18 20 22 25 28 36 40 45 50 55 70

A 0 30 -0,009 0 30 -0,009 0 35 -0,011 0 42 -0,011 0 47 -0,011 0 55 -0,013 0 62 -0,013 0 68 -0,013 0 75 -0,013 0 90 -0,015 0 105 -0,015 0 120 -0,015 0 130 -0,018 0 150 -0,018 0 180 -0,025

O

dK

21,0 21,0 24,0 29,0 34,2 40,0 45,0 51,5 56,5 67,7 78,0 90,0 99,0 113,0 133,0

25,0 25,0 29,0 35,5 40,7 47,0 53,0 60,0 66,0 80,0 92,0 105,0 115,0 130,0 160,0

Static load Co kN

Dynamic load C kN

106 106 146 240 310 400 500 640 780 1220 1560 2000 2440 3030 4750

Pivoting angle α

Weight g

21,2 3 44 21,2 3 44 30,0 6 72 48,0 4 130 62,0 4 160 80,0 4 250 100,0 4 340 127,0 4 450 156,0 4 590 245,0 3 1060 315,0 4 1660 400,0 4 2470 488,0 4 2880 607,0 4 4650 950,0 4 8440

Materials: Insert:

Bearing steel to 100Cr6, Aisi 52100, hardened, ground, phosphated treated with molybdenum disulphide

Ball:

Bearing steel to 100Cr6, Aisi 52100, hardened, ground, phosphated treated with molybdenum disulphide

1) 2)

Price and availability on request without -2RS seals

FLURO-Gelenklager GmbH

57

Spherical Plain Bearings Series W - Steel on Steel Series

GE...LO

Spherical Plain Bearings steel on steel series W to DIN ISO 12240-1, treated with molybdenum disulphide mos2, regreasable

Size (D) 0 121) +0,018 0 15 +0,018 0 16 +0,018 0 17 +0,018 0 20 +0,021 0 25 +0,021 0 30 +0,021 0 32 +0,025 0 35 +0,025 0 40 +0,025 0 45 +0,025 0 50 +0,025 0 60 +0,030 0 63 +0,030 0 70 +0,030 0 80 +0,030 0 90 +0,035 0 100 +0,035 0 110 +0,035 0 125 +0,040 0 160 +0,040 0 200 +0,046 0 250 +0,046 0 320 +0,057

B 12 15 16 17 20 25 30 32 35 40 45 50 60 63 70 80 90 100 110 125 160 200 250 320

dK

For use on standard Hydraulic Cylinders to DIN 24333 and to DIN 24336 with floor piece or piston rod relays

M 7 9 9 10 12 16 18 18 20 22 25 28 36 36 40 45 50 55 55 70 80 100 120 160

A 0 22 -0,009 0 26 -0,009 0 28 -0,009 0 30 -0,011 0 35 -0,011 0 42 -0,011 0 47 -0,011 0 52 -0,013 0 55 -0,013 0 62 -0,013 0 68 -0,013 0 75 -0,013 0 90 -0,015 0 95 -0,015 0 105 -0,015 0 120 -0,015 0 130 -0,018 0 150 -0,018 0 160 -0,025 0 180 -0,025 0 230 -0,030 0 290 -0,035 0 400 -0,040 0 520 -0,050

O 15,5 18,5 20,0 21,0 25,0 30,5 34,0 37,0 40,0 46,0 52,0 57,0 68,0 71,5 79,0 91,0 99,0 113,0 124,0 138,0 177,0 221,0 317,0 405,0

dK 18,0 22,0 23,0 25,0 29,0 35,5 40,7 43,0 47,0 53,0 60,0 66,0 80,0 83,0 92,0 105,0 115,0 130,0 140,0 160,0 200,0 250,0 350,0 450,0

Static load Co kN

Insert:

Bearing steel to 100Cr6, Aisi 52100, hardened, ground, phosphated treated with molybdenum disulphide

Ball:

Bearing steel to 100Cr6, Aisi 52100, hardened, ground, phosphated treated with molybdenum disulphide

58

lubrication groove in the insert only

FLURO-Gelenklager GmbH

Pivoting angle α

Weight g

54 10,8 4 17 84 16,0 5 28 88 17,6 4 34 106 21,0 7 43 146 30,0 4 69 240 48,0 4 124 310 62,0 4 159 335 67,0 4 207 399 79,0 4 248 500 100,0 4 349 637 127,0 4 468 780 156,0 4 620 1220 245,0 4 1110 1270 255,0 4 1270 1560 315,0 4 1690 2000 400,0 4 2550 2450 490,0 4 3040 3050 610,0 4 4870 3250 655,0 4 5530 4750 950,0 4 8190 6800 1370,0 4 15800 10600 2120,0 4 31700 18000 3550,0 4 101000 30500 6100,0 4 225000

Materials:

1)

Dynamic load C kN

Spherical Plain Bearings Series G - Steel on Steel Series GE...FO

(-2RS)

dK

Spherical Plain Bearings steel on steel series G to DIN ISO 12240-1. Treated with molybdenum disulphide mos2, regreasable

For use with higher pivoting angle

Size (D) 0 41) -0,008 0 51) -0,008 0 61) -0,008 1) 0 8 -0,008 0 101) -0,008 1) 0 12 -0,008 0 15 -0,008 0 17 -0,008 0 20 -0,010 0 25 -0,010 0 30 -0,010 0 35 -0,012 0 40 -0,012 0 45 -0,012 0 50 -0,012 0 60 -0,015 0 70 -0,015 0 80 -0,015 0 90 -0,020 0 100 -0,020 0 110 -0,020 0 120 -0,020 0 140 -0,025 0 160 -0,025 0 180 -0,025 0 200 -0,030 0 220 -0,030 0 240 -0,030 0 260 -0,035 0 280 -0,035

Materials: Insert: Ball:

B 7 9 9 11 12 15 16 20 25 28 32 35 40 43 56 63 70 75 85 85 100 115 130 135 155 165 175 190 205 210

M 4 5 5 6 7 9 10 12 16 18 20 22 25 28 36 40 45 50 55 55 70 70 80 80 100 100 100 110 120 120

A 0 14 -0,008 0 16 -0,008 0 16 -0,008 0 19 -0,009 0 22 -0,009 0 26 -0,009 0 30 -0,009 0 35 -0,011 0 42 -0,011 0 47 -0,011 0 55 -0,013 0 62 -0,013 0 68 -0,013 0 75 -0,013 0 90 -0,015 0 105 -0,015 0 120 -0,015 0 130 -0,018 0 150 -0,018 0 160 -0,025 0 180 -0,025 0 210 -0,030 0 230 -0,030 0 260 -0,035 0 290 -0,035 0 320 -0,040 0 340 -0,040 0 370 -0,040 0 400 -0,040 0 430 -0,045

O

dK

7,1 9,3 9,3 11,6 13,4 16,0 19,2 21,0 25,2 29,5 34,4 39,7 44,7 50,0 57,1 67,0 78,2 87,1 98,3 111,2 124,8 138,4 151,9 180,0 196,1 220,0 243,6 263,6 283,6 310,6

10,0 13,0 13,0 16,0 18,0 22,0 25,0 29,0 35,5 40,7 47,0 53,0 60,0 66,0 80,0 92,0 105,0 115,0 130,0 140,0 160,0 180,0 200,0 225,0 250,0 275,0 300,0 325,0 350,0 375,0

Static load Co kN

Dynamic load C kN

17,0 27,0 27,5 40,5 54,0 85,0 106,0 146,0 240,0 310,0 400,0 500,0 640,0 780,0 1220,0 1560,0 2000,0 2450,0 3050,0 3250,0 4750,0 5400,0 6800,0 7650,0 10600,0 11600,0 12700,0 15300,0 18000,0 19000,0

Bearing steel to 100Cr6, Aisi 52100, hardened, ground, phosphated treated with molybdenum disulphide from size 15 available sealed from both sides (-2RS) Bearing steel to 100Cr6, Aisi 52100, hardened, ground, phosphated treated with molybdenum disulphide

Pivoting angle α

Weight g

3,4 20 5 5,5 21 8 5,5 21 8 8,1 21 14 10,8 18 21 17,0 18 36 21,2 16 48 30,0 19 80 48,0 17 152 62,0 17 199 80,0 17 296 100,0 16 402 127,0 17 535 156,0 15 698 245,0 17 1420 315,0 17 2090 400,0 16 3010 490,0 14 3610 610,0 15 5500 655,0 14 6040 950,0 12 9740 1080,0 16 15100 1370,0 16 18900 1530,0 16 24800 2120,0 14 35900 2320,0 15 44900 2550,0 16 50900 3050,0 15 65300 3550,0 15 82000 3800,0 15 96600 1)

without lubrication hole

FLURO-Gelenklager GmbH

59

Spherical Plain Bearings Series G - Maintenance Free Series GE...FW

(-2RS)

dK

Spherical Plain Bearings series G to DIN ISO 12240-1. Mating surface hard chromium/PTFE, maintenance free

Higher pivoting angle through wider ball

Size (D) 0 4 -0,008 0 5 -0,008 0 6 -0,008 0 8 -0,008 0 10 -0,008 0 12 -0,008 0 15 -0,008 0 17 -0,008 0 20 -0,010 0 25 -0,010 0 30 -0,010 0 35 -0,012 0 40 -0,012 0 45 -0,012 0 50 -0,012 0 60 -0,015 0 70 -0,015 0 80 -0,015 0 90 -0,020 0 100 -0,020 0 110 -0,020 0 120 -0,020 0 1) 140 -0,025 0 1) 160 -0,025 0 1) 180 -0,025 0 1) 200 -0,030 0 220 1) -0,030 0 240 1) -0,030 0 1) 260 -0,035 0 1) 280 -0,035

B

M

A

0 7 4 14 -0,008 0 9 5 16 -0,008 0 9 5 16 -0,008 0 11 6 19 -0,009 0 12 7 22 -0,009 0 15 9 26 -0,009 0 16 10 30 -0,009 0 20 12 35 -0,011 0 25 16 42 -0,011 0 28 18 47 -0,011 0 32 20 55 -0,013 0 35 22 62 -0,013 0 40 25 68 -0,013 0 43 28 75 -0,013 0 56 36 90 -0,015 0 63 40 105 -0,015 0 70 45 120 -0,015 0 75 50 130 -0,018 0 85 55 150 -0,018 0 85 55 160 -0,025 0 100 70 180 -0,025 0 115 70 210 -0,030 0 130 80 230 -0,030 0 135 80 260 -0,035 0 155 100 290 -0,035 0 165 100 320 -0,040 0 175 100 340 -0,040 0 190 110 370 -0,040 0 205 120 400 -0,040 0 210 120 430 -0,045

O

dK

7,1 10,0 9,3 13,0 9,3 13,0 11,6 16,0 13,4 18,0 16,0 22,0 19,2 25,0 21,0 29,0 25,2 35,5 29,5 40,7 34,4 47,0 39,7 53,0 44,7 60,0 50,0 66,0 57,1 80,0 67,0 92,0 78,2 105,0 87,1 115,0 98,3 130,0 111,2 140,0 124,8 160,0 138,4 180,0 151,9 200,0 180,0 225,0 196,1 250,0 220,0 275,0 243,6 300,0 263,6 325,0 283,6 350,0 310,6 375,0

Static load Co kN 9,1 14,0 14,0 21,0 28,0 45,0 56,0 78,0 127,0 166,0 211,0 262,0 337,0 415,0 - - - - - - - - - - - - - - - -

Static load Co kN -2RS

Dynamic load C kN

- 3,6 - 5,8 - 5,8 - 8,6 - 11,0 - 18,0 75,0 22,0 104,0 31,0 204,0 51,0 263,0 65,0 338,0 84,0 419,0 104,0 540,0 135,0 665,0 166,0 1030,0 - 1320,0 - 1700,0 - 2070,0 - 2570,0 - 2770,0 - 4030,0 - 4530,0 - 5760,0 - 6480,0 - 9000,0 - 9900,0 - 10800,0 - 12870,0 - 15120,0 - 16200,0 -

Dynamic load C kN -2RS

- - - - - - 32,0 45,0 85,0 110,0 140,0 175,0 225,0 275,0 430,0 550,0 705,0 860,0 1070,0 1150,0 1680,0 1890,0 2400,0 2700,0 3750,0 4120,0 4500,0 5360,0 6300,0 6750,0

Materials:

Insert: Bearing steel with PTFE liner bonded to the inner surface from size 15 available sealed (-2RS) on both sides from size 35 only available sealed (-2RS) on both sides Ball: Bearing steel to 100Cr6, Aisi 52100, hardened, ground, polished, hard chrome plated On request available in stainless steel.

60

FLURO-Gelenklager GmbH

Pivoting angle α 20 21 21 21 18 18 16 19 17 17 17 16 17 15 17 17 16 14 15 14 12 16 16 16 14 15 16 15 15 15

1) from

Weight g 5 8 9 14 21 33 49 83 153 203 304 408 542 713 1420 2090 3010 3610 5500 6040 9740 15100 18900 24800 35900 44900 50900 65300 82000 96600

size 120 the hardened inserts are two pieced and secured with tension spring

Angular Contact Spherical Plain Bearings - Steel on Steel Series GE...SX

M1

Angular Contact Spherical Plain Bearings steel on steel. Treated with molybdenum disulphide mos2, regreasable

M1

S

SdK

r1s rs

For use at unidirectional, dynamic radial and additional axial loads

Size (D)

0 25 -0,012 0 28 -0,012 0 30 -0,012 0 32 -0,012 0 35 -0,012 0 40 -0,012 0 45 -0,012 0 50 -0,012 0 55 -0,015 0 60 -0,015 0 65 -0,015 0 70 -0,015 0 75 -0,015 0 80 -0,015 0 85 -0,020 0 90 -0,020 0 95 -0,020 0 100 -0,020 0 105 1) -0,020 0 1) 110 -0,020 0 1) 120 -0,020 0 1) 130 -0,025 0 140 1) -0,025 0 150 1) -0,025 0 160 1) -0,025 0 1) 170 -0,025 0 1) 180 -0,025 0 1) 190 -0,030 0 200 1) -0,030

B

M

0 15 14,0 47 -0,014 0 15 15,0 52 -0,016 0 17 15,0 55 -0,016 0 17 16,0 58 -0,016 0 18 16,0 62 -0,016 0 19 17,0 68 -0,016 0 20 18,0 75 -0,016 0 20 19,0 80 -0,016 0 23 20,0 90 -0,018 0 23 21,0 95 -0,018 0 23 22,0 100 -0,018 0 25 23,0 110 -0,018 0 25 24,0 115 -0,018 0 29 25,5 125 -0,020 0 29 26,5 130 -0,020 0 32 28,0 140 -0,020 0 32 29,5 145 -0,020 0 32 31,0 150 -0,020 0 35 32,5 160 -0,025 0 38 34,0 170 -0,025 0 38 37,0 180 -0,025 0 45 43,0 200 -0,030 0 45 43,0 210 -0,030 0 48 46,0 225 -0,030 0 51 49,0 240 -0,030 0 57 55,0 260 -0,035 0 64 61,0 280 -0,035 0 64 62,0 290 -0,035 0 70 66,0 310 -0,035

T +0,25 15 -0,40 +0,25 16 -0,40 +0,25 17 -0,40 +0,25 17 -0,40 +0,25 18 -0,40 +0,25 19 -0,40 +0,25 20 -0,40 +0,25 20 -0,40 +0,25 23 -0,50 +0,25 23 -0,50 +0,25 23 -0,50 25 +0,25 -0,50 25 +0,25 -0,50 29 +0,25 -0,50 29 +0,25 -0,60 32 +0,25 -0,60 32 +0,25 -0,60 32 +0,25 -0,60 35 +0,25 -0,60 38 +0,25 -0,60 38 +0,25 -0,60 45 +0,35 -0,70 45 +0,35 -0,70 48 +0,35 -0,70 51 +0,35 -0,70 57 +0,35 -0,70 64 +0,35 -0,70 64 +0,35 -0,80 70 +0,35 -0,80

S

M1

rs, r1s min

dk

r1s

rs

T

A

T

Pivoting angle Dynamic C αP

Radial Load kN Static Co

dK

0,6 7,5 1,0 42,0 250 1,0 8,0 1,0 47,0 300 1,3 8,5 1,0 49,5 315 2,0 8,5 1,0 52,0 354 2,1 9,0 1,0 55,5 390 2,8 9,5 1,0 62,0 463 3,5 10,0 1,0 68,5 540 4,3 10,0 1,0 74,0 618 5,0 11,5 1,1 82,0 721 5,7 11,5 1,1 88,5 817 6,5 11,5 1,1 93,5 905 7,2 12,5 1,1 102,0 1030 7,9 12,5 1,1 107,0 1129 8,6 14,5 1,1 115,0 1290 9,4 14,5 1,1 122,0 1422 10,1 16,0 1,5 128,5 1580 10,8 16,0 1,5 135,0 1750 11,6 16,0 1,5 141,0 1923 12,3 17,5 2,0 148,0 2116 13,0 19,0 2,0 155,0 2318 14,5 19,0 2,0 168,0 2735 18,0 19,0 2,5 188,0 3550 19,0 19,0 2,5 198,0 3740 20,0 20,5 3,0 211,0 4270 20,0 22,0 3,0 225,0 4850 21,0 27,0 3,0 246,0 5950 21,0 28,0 3,0 260,0 6970 26,0 30,0 3,0 275,0 7500 26,0 30,0 3,0 290,0 8420

50 2,5 60 2,0 63 4,5 71 2,0 78 4,0 92 3,5 108 3,0 123 1,5 144 4,0 163 2,5 180 1,0 206 2,0 220 1,0 258 3,5 284 2,0 316 3,5 350 2,0 384 0,5 423 2,0 463 3,0 547 0,5 710 1,0 740 1,0 850 1,0 970 1,0 1190 1,0 1395 1,0 1500 0,5 1680 1,5

Weight g 148 186 208 241 268 327 416 455 645 714 759 1040 1120 1540 1610 2090 2220 2340 2930 3680 3970 5920 6330 8010 9790 12300 17400 18200 23800

Materials: Housing disk:

Bearing steel to 100Cr6, Aisi 52100, hardened, ground, phosphated treated with molybdenum disulphide

Inner disk:

Bearing steel to 100Cr6, Aisi 52100, hardened, ground, phosphated treated with molybdenum disulphide

1)

Price and availability on request

FLURO-Gelenklager GmbH

61

Angular Contact Spherical Plain Bearings - Maintenance Free Series GE...SW

S

Angular Contact Spherical Plain Bearings. Mating surface hard chromium/PTFE, maintenance free

r1s rs

For use at unidirectional, dynamic radial and additional axial loads

Size (D)

0 25 -0,012 0 28 -0,012 0 30 -0,012 0 32 -0,012 0 35 -0,012 0 40 -0,012 0 45 -0,012 0 50 -0,012 0 55 -0,015 0 60 -0,015 0 65 -0,015 0 70 -0,015 0 75 -0,015 0 80 -0,015 0 85 -0,020 0 90 -0,020 0 95 -0,020 0 100 -0,020 1) 0 105 -0,020 0 110 1) -0,020 0 120 1) -0,020 0 130 1) -0,020 1) 0 140 -0,020 0 150 1) -0,025 1) 0 160 -0,025 0 170 1) -0,025 0 180 1) -0,025 0 190 1) -0,030 1) 0 200 -0,030

B

M

0 15 14,0 47 -0,014 0 15 15,0 52 -0,016 0 17 15,0 55 -0,016 0 17 16,0 58 -0,016 0 18 16,0 62 -0,016 0 19 17,0 68 -0,016 0 20 18,0 75 -0,016 0 20 19,0 80 -0,016 0 23 20,0 90 -0,018 0 23 21,0 95 -0,018 0 23 22,0 100 -0,018 0 25 23,0 110 -0,018 0 25 24,0 115 -0,018 0 29 25,5 125 -0,020 0 29 26,5 130 -0,020 0 32 28,0 140 -0,020 0 32 29,5 145 -0,020 0 32 31,0 150 -0,020 0 35 32,5 160 -0,020 0 38 34,0 170 -0,020 0 38 37,0 180 -0,025 0 45 43,0 200 -0,025 0 45 43,0 210 -0,025 0 48 46,0 225 -0,030 0 51 49,0 240 -0,030 0 57 55,0 260 -0,035 0 64 61,0 280 -0,035 0 64 62,0 290 -0,035 0 70 66,0 310 -0,035

T +0,25 15 -0,40 +0,25 16 -0,40 +0,25 17 -0,40 +0,25 17 -0,40 +0,25 18 -0,40 +0,25 19 -0,40 +0,25 20 -0,40 +0,25 20 -0,40 23 +0,25 -0,50 23 +0,25 -0,50 +0,25 23 -0,50 +0,25 25 -0,50 +0,25 25 -0,50 +0,25 29 -0,50 +0,25 29 -0,60 +0,25 32 -0,60 +0,25 32 -0,60 +0,25 32 -0,60 +0,25 35 -0,60 +0,25 38 -0,60 +0,25 38 -0,60 +0,35 45 -0,70 +0,35 45 -0,70 +0,35 48 -0,70 +0,35 51 -0,70 +0,35 57 -0,70 64 +0,35 -0,70 +0,35 64 -0,80 +0,35 70 -0,80

S

rs, r1s min

0,6 1,0 1,3 2,0 2,1 2,8 3,5 4,3 5,0 5,7 6,5 7,2 7,9 8,6 9,4 10,1 10,8 11,6 12,3 13,0 14,5 18,0 19,0 20,0 20,0 21,0 21,0 26,0 26,0

1,0 1,0 1,0 1,0 1,0 1,0 1,0 1,0 1,1 1,1 1,1 1,1 1,1 1,1 1,1 1,5 1,5 1,5 2,0 2,0 2,0 2,5 2,5 3,0 3,0 3,0 3,0 3,0 3,0

dk

dK dK

r1s

rs

T

A

S

T

Radial Load kN Static Co

42,0 47,0 49,5 52,0 55,5 62,0 68,5 74,0 82,0 88,5 93,5 102,0 107,0 115,0 122,0 128,5 135,0 141,0 148,0 155,0 168,0 188,0 198,0 211,0 225,0 246,0 260,0 275,0 290,0

Pivoting angle Dynamic C αP

225 270 285 320 340 400 470 540 630 710 790 900 980 1120 1240 1380 1530 1680 1850 2020 2390 3110 3270 3730 4240 5200 6100 6560 7360

89 2,5 100 2,0 110 4,5 125 2,0 135 4,0 160 3,5 190 3,0 215 1,5 250 4,0 285 2,5 315 1,0 360 2,0 395 1,0 450 3,5 495 2,0 550 3,5 610 2,0 670 0,5 740 2,0 810 3,0 955 0,5 1240 1,0 1310 1,0 1490 1,0 1690 1,0 2080 1,0 2440 1,0 2620 0,5 2940 1,5

Weight g 148 186 208 241 268 327 416 455 645 714 759 1040 1120 1540 1610 2090 2220 2340 2930 3680 3970 5920 6330 8010 9790 12300 17400 18200 23800

Materials: Housing disk:

Bearing steel to 100Cr6, Aisi 52100, hardened with PTFE liner bonded to the inner surface

Inner disk:

Bearing steel to 100Cr6, Aisi 52100, hardened, ground, polished, hard chrome plated

On request:

stainless steel version

1)

62

Price and availability on request

FLURO-Gelenklager GmbH

Spherical Plain Thrust Bearings - Steel on Steel

Spherical Plain Thrust Bearings steel on steel. Treated with molybdenum disulphide mos2, regreasable

M1

S S M1 r1s

r1s

dK

d1

D1

D1

dK

rs

d1

Series GE...AX

rs

T

T

For use at axial loads

Size (D)

0 10 -0,008 0 12 -0,008 0 15 -0,008 0 17 -0,008 0 20 -0,010 0 25 -0,010 0 30 -0,010 0 35 -0,012 0 40 -0,012 0 45 -0,012 0 50 -0,012 0 60 -0,015 0 70 -0,015 0 80 -0,015 0 100 -0,020 1) 0 120 -0,020 0 140 1) -0,025 1) 0 160 -0,025 0 180 1) -0,025 0 200 1) -0,030

B

M

A

0 7,5 7,0 30 -0,009 0 9,5 9,3 35 -0,011 0 11,0 10,8 42 -0,011 0 11,8 11,2 47 -0,011 0 14,5 13,8 55 -0,013 0 16,5 16,7 62 -0,013 0 19,0 19,0 75 -0,013 0 22,0 20,7 90 -0,015 0 27,0 21,5 105 -0,015 0 31,0 25,5 120 -0,015 0 33,0 30,5 130 -0,018 0 37,0 34,0 150 -0,018 0 42,0 36,5 160 -0,025 0 43,5 38,0 180 -0,025 0 51,0 46,0 210 -0,030 0 53,5 50,0 230 -0,030 0 61,0 54,0 260 -0,035 0 66,0 58,0 290 -0,035 0 74,0 62,0 320 -0,040 0 80,0 66,0 340 -0,045

T +0,25 9,5 -0,40 +0,25 13,0 -0,40 +0,25 15,0 -0,40 +0,25 16,0 -0,40 +0,25 20,0 -0,40 +0,25 22,5 -0,40 +0,25 26,0 -0,40 +0,25 28,0 -0,40 32,0 +0,25 -0,40 36,5 +0,25 -0,40 42,5 +0,25 -0,40 45,0 +0,25 -0,50 50,0 +0,25 -0,50 50,0 +0,25 -0,50 59,0 +0,25 -0,60 64,0 +0,25 -0,60 72,0 +0,35 -0,70 77,0 +0,35 -0,70 86,0 +0,35 -0,70 87,0 +0,35 -0,80

S

M1

rs, r1s min

7,0 3,0 8,0 4,0 10,0 5,0 11,0 5,0 12,5 6,0 14,0 6,0 17,5 8,0 22,0 8,0 24,5 9,0 27,5 11,0 30,0 10,0 35,0 12,5 35,0 13,5 42,5 14,5 45,0 15,0 52,5 16,5 52,5 23,0 65,0 23,0 67,5 26,0 70,0 27,0

0,6 0,6 0,6 0,6 1,0 1,0 1,0 1,0 1,0 1,0 1,0 1,0 1,0 1,0 1,1 1,1 1,5 1,5 1,5 1,5

d1 max

D1 min

dk

Pivoting angle Dynamic C αP

Axiale load kN Static Co

27,5 15,5 32 32,0 18,0 38 39,0 22,5 46 43,5 27,0 52 50,0 31,0 60 58,5 34,5 68 70,0 42,0 82 84,0 50,5 98 97,0 59,0 114 110,0 67,0 128 120,0 70,0 139 140,0 84,0 160 153,0 94,5 176 172,0 107,5 197 198,0 127,0 222 220,0 145,0 250 243,0 177,0 274 271,0 200,0 313 299,0 225,0 340 320,0 247,0 365

136 188 267 311 425 672 909 1330 1810 2470 2810 3820 4610 5700 6470 7580 9040 10440 12070 15280

27 37 53 61 84 134 182 266 357 486 554 748 902 1110 1300 1530 1820 2100 2430 3070

5 5 6 4 5 5 5 5 6 6 6 6 3 4 4 3 3 2 4 1

Weight g 36 72 108 137 246 415 614 973 1590 2240 3140 4630 5370 6910 11000 14000 19100 25000 32800 35400

Materials: Housing disk:

Bearing steel to 100Cr6, Aisi 52100, hardened, ground, phosphated treated with molybdenum disulphide

Inner disk:

Bearing steel to 100Cr6, Aisi 52100, hardened, ground, phosphated treated with molybdenum disulphide

1)

Price and availability on request

FLURO-Gelenklager GmbH

63

Spherical Plain Thrust Bearings - Maintenance Free Series GE...AW Spherical Plain Thrust Bearings. Mating surface hard chromium/PTFE, maintenance free

S

S

r1s

r1s

rs

d1

d1

D1

D1

dK dK

rs

T

T

For use with axial loads

Size (D) 10 12 15 17 20 25 30 35 40 45 50 60 70 80 100 120 1) 140 1) 160 1) 180 1) 200 1) 2201) 240 1) 260 1) 280 1) 300 1) 320 1) 340 1) 360 1)

0 -0,008 0 -0,008 0 -0,008 0 -0,008 0 -0,010 0 -0,010 0 -0,010 0 -0,012 0 -0,012 0 -0,012 0 -0,012 0 -0,015 0 -0,015 0 -0,015 0 -0,020 0 -0,020 0 -0,025 0 -0,025 0 -0,025 0 -0,030 0 -0,030 0 -0,030 0 -0,035 0 -0,035 0 -0,035 0 -0,040 0 -0,040 0 -0,040

B

M

7,5 9,5 11,0 11,8 14,5 16,5 19,0 22,0 27,0 31,0 33,0 37,0 42,0 43,5 51,0 53,5 61,0 66,0 74,0 80,0 82,0 87,0 95,0 100,0 100,0 105,0 105,0 115,0

7,0 9,3 10,8 11,2 13,8 16,7 19,0 20,7 21,5 25,5 30,5 34,0 36,5 38,0 46,0 50,0 54,0 58,0 62,0 66,0 67,0 73,0 80,0 85,0 90,0 91,0 91,0 95,0

A 30 35 42 47 55 62 75 90 105 120 130 150 160 180 210 230 260 290 320 340 370 400 430 460 480 520 540 560

0 -0,009 0 -0,011 0 -0,011 0 -0,011 0 -0,013 0 -0,013 0 -0,013 0 -0,015 0 -0,015 0 -0,015 0 -0,018 0 -0,018 0 -0,025 0 -0,025 0 -0,030 0 -0,030 0 -0,035 0 -0,035 0 -0,040 0 -0,040 0 -0,040 0 -0,040 0 -0,045 0 -0,045 0 -0,045 0 -0,050 0 -0,050 0 -0,050

T 9,5 13,0 15,0 16,0 20,0 22,5 26,0 28,0 32,0 36,5 42,5 45,0 50,0 50,0 59,0 64,0 72,0 77,0 86,0 87,0 97,0 103,0 115,0 110,0 110,0 116,0 116,0 125,0

S +0,25 -0,40 +0,25 -0,40 +0,25 -0,40 +0,25 -0,40 +0,25 -0,40 +0,25 -0,40 +0,25 -0,40 +0,25 -0,40 +0,25 -0,40 +0,25 -0,40 +0,25 -0,40 +0,25 -0,50 +0,25 -0,50 +0,25 -0,50 +0,25 -0,60 +0,25 -0,60 +0,35 -0,70 +0,35 -0,70 +0,35 -0,70 +0,35 -0,80 +0,35 -0,80 +0,35 -0,80 +0,35 -0,80 +0,35 -0,80 +0,35 -0,80 +0,35 -0,80 +0,35 -0,80 +0,35 -0,80

7,0 8,0 10,0 11,0 12,5 14,0 17,5 22,0 24,5 27,5 30,0 35,0 35,0 42,5 45,0 52,5 52,5 65,0 67,5 70,0 75,0 77,5 82,5 80,0 80,0 95,0 95,0 95,0

rs, r1s min 0,6 0,6 0,6 0,6 1,0 1,0 1,0 1,0 1,0 1,0 1,0 1,0 1,0 1,0 1,1 1,1 1,5 1,5 1,5 1,5 1,5 1,5 1,5 3,0 3,0 4,0 4,0 4,0

Pivoting angle Dynamic C α

Axiale load kN

d1 max

D1 min

dk

Static Co

27,5 32,0 39,0 43,5 50,0 58,5 70,0 84,0 97,0 110,0 120,0 140,0 153,0 172,0 198,0 220,0 243,0 271,0 299,0 320,0 350,0 382,0 409,0 445,0 460,0 500,0 510,0 535,0

15,5 18,0 22,5 27,0 31,0 34,5 42,0 50,5 59,0 67,0 70,0 84,0 94,5 107,5 127,0 145,0 177,0 200,0 225,0 247,0 265,5 294,0 317,0 337,0 356,0 380,0 380,0 400,0

32 38 46 52 60 68 82 98 114 128 139 160 176 197 222 250 274 313 340 365 388 420 449 480 490 540 550 575

120 165 235 275 380 600 820 1200 1640 2240 2550 3470 4180 5180 5940 6960 8300 9560 11050 13990 13110 15560 17510 23400 25480 33260 33880 37630

45 65 95 110 150 245 335 490 675 915 1040 1360 1640 2030 2230 2610 3120 3380 3910 4950 4640 5500 6190 8280 9010 11360 11570 12850

5,0 5,0 6,0 4,0 5,0 5,0 5,0 5,0 6,0 6,0 6,0 6,0 3,0 4,0 4,0 3,0 3,0 2,0 4,0 1,0 7,0 6,0 7,0 4,0 3,5 4,0 4,0 4,0

Weight g 36 72 108 137 246 415 614 973 1590 2240 3140 4630 5370 6910 11000 14000 19100 25000 32800 35400 44700 56900 71300 84700 88900 111000 117000 132000

Materials: Housing disk:

Bearing steel to 100Cr6, Aisi 52100, hardened with PTFE liner bonded to the inner surface

Inner disk:

Bearing steel to 100Cr6, Aisi 52100, hardened, ground, polished, hard chrome plated

On request:

stainless steel version

1)

64

Price and availability on request

FLURO-Gelenklager GmbH

Hydraulic Rod Ends to DIN 24555 / ISO 8133 Series

FPR...S

M1

Rod Ends, fastened by hexagon socket head cap screw to DIN 912-8.8. Spherical Plain Bearings, regreasable, fixed through caulking on both sides For use in standard Hydraulic Cylinders 160 bar to ISO 6020/2

Size (D) 12 16 20 25 30 40 50 60 80 100

B

M

M1

A

F

L

K

J

G

10 14 16 20 22 28 35 44 55 70

8 11 13 17 19 23 30 38 47 55

13 13 17 17 19 23 30 38 47 55

35 45 55 65 80 100 120 160 205 240

42 48 58 68 85 105 130 150 185 240

58,0 69,0 83,0 99,0 123,0 153,0 188,0 230,0 282,5 357,5

40 45 55 62 77 90 105 134 156 190

17 21 25 30 36 45 55 68 90 110

M 10x1,25 M 12x1,25 M 14x1,5 M 16x1,5 M 20x1,5 M 27x2 M 33x2 M 42x2 M 48x2 M 64x3

GL 15 17 19 23 29 37 46 57 64 86

Torque Nm

Static load Co kN

Dynamic load C kN

10 10 25 25 49 49 86 210 410 710

17,0 28,5 42,5 67,0 108,0 156,0 245,0 380,0 585,0 865,0

10,8 21,1 30,0 48,0 62,0 100,0 156,0 245,0 400,0 610,0

Pivoting angle Weight g α 11 10 9 7 6 7 6 6 6 7

120 220 430 670 1250 2160 3900 7150 15000 27300

Materials: Housing:

up to size 50 forged from heat-treated steel to C45, Aisi 1045 from size 60 made from nodular cast iron GS 400

Bearing:

Steel on steel bearing GE...E, requiring lubrication

Greasing:

Size 12 is not regreasable from size 16 - 20 fitted with grease hole in housing from size 25 fitted with hydraulic grease nipples to DIN 71412

On request: with left hand thread (FPL...S)

FLURO-Gelenklager GmbH

65

Hydraulic Rod Ends to DIN 24338 / ISO 6982 FPR...CE

Series

M1

Rod Ends Cetop, recommendation RP 58H for standard Hydraulic Cylinders, fastened by hexagon socket head cap screws to DIN 912-8.8. Spherical Plain Bearings, regreasable, fixed with snap rings Mounting dimensions to DIN 24333-24336 and ISO 6020/1, ISO 6022

Size (D)

B

12 16 20 25 32 40 50 63 70 80 90 100 110 125 160 200

12 16 20 25 32 40 50 63 70 80 90 100 110 125 160 200

M

M1

11,0 15,0 13,0 15,0 17,0 19,0 22,0 19,0 28,0 22,0 33,0 26,0 41,0 32,0 53,0 38,0 57,0 42,0 67,0 48,0 72,0 52,0 85,0 62,0 88,0 62,0 103,0 72,0 130,0 82,0 162,0 102,0

A

F

L

K

J

G

GL

Torque Nm

Static load Co kN

32,0 40,0 47,0 58,0 71,0 90,0 109,0 136,0 155,0 170,0 185,0 211,0 235,0 265,0 326,0 418,0

38 44 52 65 80 97 120 140 160 180 195 210 235 260 310 390

54,0 64,0 77,0 96,0 118,0 146,0 179,0 213,0 245,0 270,0 296,0 322,0 364,0 406,5 488,0 620,0

32 40 47 54 66 80 96 114 135 148 160 178 190 200 250 320

16 21 25 30 38 47 58 70 80 90 100 110 125 135 165 215

M 12x1,25 M 14x1,5 M 16x1,5 M 20x1,5 M 27x2 M 33x2 M 42x2 M 48x2 M 56x2 M 64x3 M 72x3 M 80x3 M 90x3 M 100x3 M 125x4 M 160x4

17 19 23 29 37 46 57 64 76 86 91 96 106 113 126 161

6 10 25 25 49 49 86 210 210 410 410 710 710 710 710 1500

24,5 36,5 48,0 78,0 114,0 204,0 310,0 430,0 540,0 695,0 750,0 1060,0 1200,0 1430,0 2200,0 3650,0

Materials:

66

Housing:

up to size 63 forged from heat-treated steel to C45, Aisi 1045 from size 70 made from nodular cast iron GS 400

Bearing:

Steel on steel bearing GE...LO, requiring lubrication

Greasing:

size 12 is not regreasable from size 16 fitted with hydraulic grease nipples to DIN 71412

On request:

with left hand thread (FPL...CE)

FLURO-Gelenklager GmbH

Dynamic load C kN 10,8 17,6 30,0 48,0 67,0 100,0 156,0 255,0 315,0 400,0 490,0 610,0 655,0 950,0 1370,0 2120,0

Pivoting angle Weight g α 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

110 200 350 620 1150 2180 3960 6800 9600 13000 19100 25000 32000 46000 82500 168000

Hydraulic Rod Ends Series

FPR...N

M1

Rod Ends with short thread, particular suited for Hydraulic Cylinders. Spherical Plain Bearings, regreasable, fixed with snap rings For use with shortest relay distances and maximum stroke utilization

Size (D) 20 25 30 35 40 50 60 70 80 90 100 110 120

B

M

M1

A

F

L

K

J

16 20 22 25 28 35 44 49 55 60 70 70 85

19 23 28 30 35 40 50 55 60 65 70 80 90

17 21 26 28 33 37 46 51 55 60 65 74 84

56 56 64 78 94 116 130 154 176 206 231 266 340

50 50 60 70 85 105 130 150 170 210 235 265 310

80,0 80,0 94,0 112,0 135,0 168,0 200,0 232,0 265,0 322,0 360,0 407,0 490,0

46 46 50 66 76 90 120 130 160 180 200 220 257

25 25 32 40 49 61 75 86 105 124 138 152 172

G M M M M M M M M M M M M M

16x1,5 16x1,5 22x1,5 28x1,5 35x1,5 45x1,5 58x1,5 65x1,5 80x2 100x2 110x2 120x3 130x3

GL

Static load Co kN

17 17 23 29 36 46 59 66 81 101 111 125 135

81,1 72,0 106,0 153,0 250,0 365,0 400,0 540,0 670,0 980,0 1120,0 1700,0 2900,0

Dynamic load C kN 30 48 62 80 100 156 245 315 400 490 610 655 950

Pivoting angle α 9 7 6 6 7 6 6 6 6 5 7 6 6

Weight g 450 490 760 1260 2150 3800 6200 9830 13970 23500 32000 41000 72000

Materials: Housing:

up to size 80 forged from heat-treated steel to C45, Aisi 1045 from size 90 made from nodular cast iron GS 400

Bearing:

Steel on steel bearing GE...E, requiring lubrication

Greasing:

fitted with hydraulic grease nipples to DIN 71412

On request: with left hand thread (FPL...N)

FLURO-Gelenklager GmbH

67

Hydraulic Rod Ends Series

FPR...U

M1

Rod Ends identical with FPR...N, in addition fastened by hexagon socket head cap screws to DIN 912-8.8. Spherical Plain Bearings, regreasable, fixed with snap rings For use with shortest relay distances and maximum stroke utilization

Size (D) 20 25 30 35 40 50 60 70 80 90 100 110 120

B

M

M1

A

F

L

K

J

16 20 22 25 28 35 44 49 55 60 70 70 85

19 23 28 30 35 40 50 55 60 65 70 80 90

17 21 26 28 33 37 46 51 55 60 65 74 84

56 56 64 78 94 116 130 154 176 206 231 266 340

50 50 60 70 85 105 130 150 170 210 235 265 310

80,0 80,0 94,0 112,0 135,0 168,0 200,0 232,0 265,0 322,0 360,0 407,5 490,0

46 46 50 66 76 90 120 130 160 180 200 220 257

25 25 32 40 49 61 75 86 105 124 138 152 172

G M M M M M M M M M M M M M

16x1,5 16x1,5 22x1,5 28x1,5 35x1,5 45x1,5 58x1,5 65x1,5 80x2 100x2 110x2 120x3 130x3

GL

Torque Nm

Static load Co kN

17 17 23 29 36 46 59 66 81 101 111 125 135

25 25 25 49 49 86 210 210 410 410 710 710 710

81,1 72,0 106,0 153,0 250,0 365,0 400,0 540,0 670,0 980,0 1120,0 1700,0 2900,0

Materials: Housing:

up to size 80 forged from heat-treated steel to C45, Aisi 1045 from size 90 made from nodular cast iron GS 400

Bearing:

Steel on steel bearing GE...E, requiring lubrication on request also available with Spherical Plain Bearing GE...LO

Greasing:

fitted with hydraulic grease nipples to DIN 71412

On request: with left hand thread (FPL...U)

68

FLURO-Gelenklager GmbH

Dynamic load C kN 30 48 62 80 100 156 245 315 400 490 610 655 950

Pivoting angle Weight g α 9 7 6 6 7 6 6 6 6 5 7 6 6

440 470 770 1240 2120 3740 6490 9880 14200 20000 27500 45600 72000

Hydraulic Rod Ends FMA...D

Series

Rod Ends fastened by hexagon socket head cap screws to DIN 912-8.8. Spherical Plain Bearings, regreasable, fixed with snap rings For use with double action Hydraulic Cylinders



Size (D)

B

M

A

F

L

K

J

25 30 35 40 50 60 70 80 90 100 110 120 140 160

20 22 25 28 35 44 49 55 60 70 70 85 90 105

23 28 30 35 40 50 55 60 65 70 80 90 110 110

56 64 78 94 116 130 154 176 206 230 264 340 380 480

65 75 90 105 135 170 195 210 250 275 300 360 420 460

95 109 132 155 198 240 278 305 363 400 442 540 620 710

48 56 70 78 88 118 138 168 180 188 210 240 256 290

28 34 44 55 70 87 105 125 150 170 180 210 230 260

G M M M M M M M M M M M M M M

18x2 24x2 30x2 39x3 50x3 64x3 80x3 90x3 100x3 110x4 120x4 150x4 160x4 180x4

GL

Torque Nm

Static load Co kN

30 35 45 55 75 95 110 120 140 150 160 190 210 230

20 20 40 80 80 160 160 300 300 300 500 500 1100 1100

76 112 180 295 445 530 720 890 1300 1490 2050 2970 3350 4300

Dynamic load C kN 48 62 80 100 156 245 315 400 490 610 650 950 1080 1370

Pivoting angle Weight g α 8 7 7 7 7 7 6 6 5 7 6 6 7 8

650 1000 1300 2400 4100 6500 9500 16000 28000 34000 44000 75000 160000 185000

Materials: Housing:

Nodular cast iron GS400

Bearing:

Steel on steel bearing GE...E, requiring lubrication

Greasing:

size 25 without lubrication fitting, but fitted with grease hole in housing from size 30 fitted with hydraulic grease nipples to DIN 71412

On request: with left hand thread (FMAL...D)

FLURO-Gelenklager GmbH

69

Hydraulic Rod Ends - Weld-On Base Series

FS...C

Rod Ends series E to DIN ISO 12240-4, type S with circular surface for weld-on. Spherical Plain Bearings, regreasable, fixed through caulking on both sides

45¼

Size (D)

B

M

A

F

L

L1

K

6

L1

For Weld-on to piston Rod Ends

J

10 9 7 29 24 38,5 1,5 15,0 3 12 10 8 34 27 44,0 1,5 17,5 3 15 12 10 40 31 51,0 2,0 21,0 4 17 14 11 46 35 58,0 2,0 24,0 4 20 16 13 53 38 64,5 2,0 27,5 4 25 20 17 64 45 77,0 3,0 33,5 4 30 22 19 73 51 87,5 3,0 40,0 4 35 25 21 82 61 102,0 3,0 47,0 4 40 28 23 92 69 115,0 4,0 52,0 4 45 32 27 102 77 128,0 4,0 58,0 6 50 35 30 112 88 144,0 4,0 62,0 6 60 44 38 135 100 167,5 4,0 70,0 6 70 49 42 160 115 195,0 5,0 80,0 6 80 55 47 180 141 231,0 5,0 95,0 6

Static load Co kN

Dynamic load C kN

Pivoting angle α

Weight g

15,6 8,15 12 40 21,6 10,80 11 60 32,0 17,00 8 120 40,0 21,20 10 180 54,0 30,00 9 260 72,0 48,00 7 450 95,0 62,00 6 670 125,0 80,00 6 1020 156,0 100,00 7 1400 208,0 127,00 7 1930 250,0 156,00 6 2690 390,0 245,00 6 4600 510,0 315,00 6 7000 620,0 400,00 6 11000

Materials: Housing:

St 52-3, forged

Bearing: Steel on steel bearing GE...E, requiring lubrication On request: available with maintenance free Spherical Plain Bearing GE...EC (see page 48) or in sizes 12, 20, 25, 40, 50, 70, 80, with Spherical Plain Bearing GE...LO (see page 58), requiring lubrication Greasing:

up to size 12 without lubrication fitting from size 15 - 20 fitted with grease hole in housing from size 25 fitted with hydraulic grease nipples to DIN 71412

On request: Housing: Stainless steel to 1.4301, Aisi 304, forged, from size 45 turned Bearing: available with maintenance free stainless steel Spherical Plain Bearing GE...EC-NIRO (see page 49) in sizes 12, 15, 17, 20, 25, 30, 35, 40

70

FLURO-Gelenklager GmbH

Hydraulic Rod Ends - Weld-On Base Series

FS...N

Rod Ends with rectangular surface for Weld-on. Spherical Plain Bearings, regreasable, fixed with snap rings

For Weld-On to cylinder bottoms

Size (D) 15 16 17 20 25 30 35 40 45 50 60 70 80 90 100 110 120

B 12 14 14 16 20 22 25 28 32 35 44 49 55 60 70 70 85

M 16,0 17,5 17,5 19,0 23,0 28,0 30,0 35,0 40,0 40,0 50,0 55,0 60,0 65,0 70,0 80,0 90,0

A 45 48 48 50 55 65 83 100 110 123 140 164 180 226 250 295 360

F

L

31 35 35 38 45 51 61 69 77 88 100 115 141 150 170 185 210

Static load Co kN

Dynamic load C kN

Pivoting angle α

Weight g

53,5 53,0 17,0 8 220 59,0 59,0 21,2 10 290 59,0 65,0 21,2 10 290 63,0 67,0 30,0 9 360 72,5 69,5 48,0 7 530 83,5 118,0 62,0 6 850 102,5 196,0 80,0 6 1500 119,0 305,0 100,0 7 2420 132,0 386,0 127,0 7 3390 149,5 441,0 156,0 6 4240 170,0 570,0 245,0 6 7100 197,0 724,0 315,0 6 10700 231,0 804,0 400,0 6 15100 263,0 1340,0 490,0 5 23400 295,0 1516,0 610,0 7 33100 332,5 2340,0 655,0 6 48500 390,0 3210,0 950,0 6 79500

Materials: Housing:

St 52-3, forged

Bearing:

Steel on steel bearing GE...E, requiring lubrication

Greasing:

fitted with hydraulic grease nipple to DIN 71412

On request: Housing: Stainless steel to 1.4301, Aisi 304, forged, with maintenance free stainless steel Spherical Plain Bearing GE...EC-NIRO (see page 49)

FLURO-Gelenklager GmbH

71

Angle Joints Angle Joints to

e

D1

d4

l3

d2

consisting of ball stud to DIN 71803 and ball journal to DIN 71805

d3

DIN 71802

Form CS

Form C

a

SW

l2

Form C with threaded stud and hexagon nut. Form CS with threaded stud, hexagon nut and external clip

Size (D)

a

d2

±0,3

8 22 M 10 25 M 13 30 M 16 35 M 16 35 M 19 45 M 19 45 M

1

d2

d3

±0,5

d4

±0,5

e

min

l2

±0,3

l3

±0,3

5 8 12,8 10,2 10,2 9 6 10 14,8 11,5 12,5 11 8 13 19,3 14,0 16,5 13 10 16 24,0 15,5 20,0 16 12 16 24,0 15,5 20,0 16 14x1,5 22 30,0 21,5 28,0 20 14x2 22 30,0 21,5 28,0 20

SW h14

Ball Journal: Ball Stud: Surface:

Steel, minimum strength Rm= 500N/mm2 Steel, minimum strength Rm= 600N/mm2 blanc, zinc plated white, on request: yellow or black chromated

Alternative:

stainless steel to 1.4305, Aisi 303

e.g. Angle Joint with external clip, Form CS with ball diameter D1 = 10 mm: Angle Joint DIN 71802 - CS 10 Left Hand Thread: Left hand thread only at the ball journal available: Angle Joint DIN 71802 - CS 10 LH Loose Fit:

72

increased internal clearance available: Angle Joint DIN 71802 - CSL 10

FLURO-Gelenklager GmbH

1

α 1≈

α 2≈

7 18 10 8 18 15 11 18 15 13 18 15 13 18 15 16 18 15 16 18 15

Materials:

Ordering Details:

1

2

Weight g 15,2 25,2 53,1 104,0 104,0 221,0 221,0

Fork Heads / Fork Ball Joints l4

Fork Heads

d1

to

DIN 71752 Fork Ball Joints

l1

g

With ES-Bolt (clevis spring pin) or cotter bolt

a

a b

DIN 71751

d2

to

d3

l2

d1

d1

l3

For use to transmit linear movements

Size



g

a

b B13

d1 H9/h11

d2

d3

l1

l2

l3

l4

Weight g

Fork Head DIN 71752 4x8 8 21 16 1,5 5 8 4 4 M 4 8 6,0 9,2 1,4 4x16 16 29 24 7 5x10 10 26 20 2,7 9 10 5 5 M 5 9 7,5 12,0 2,4 5x20 20 36 30 2,9 13 6x12 12 31 24 4,6 15 12 6 6 M 6 10 9,0 14,5 4,4 6x24 24 43 36 5,0 22 8x16 16 42 32 10,4 37 16 8 8 M 8 14 12,0 18,7 9,4 8x32 32 58 48 11,5 54 10x20 20 52 40 19,0 74 20 10 10 M 10 18 15,0 23,2 17,8 10x40 40 72 60 20,3 116 12x24 24 62 48 33,5 121 24 12 12 M 12 20 18,0 28,2 33,6 12x48 48 86 72 34,5 175 14x28 28 72 56 45,0 178 27 14 14 M 14 24 22,5 31,2 50,7 14x56 56 101 85 50,0 258 16x32 32 83 64 70,0 282 32 16 16 M 16 26 24,0 36,2 74,7 16x64 64 115 96 71,5 410 20x40 40 40 20 20 M 20 34 105 80 30,0 47,0 132,0 130,0 520 ES-Bolt

Cotter Bolt

Materials: Standard Series:

free-cutting steel to 9SMnPb28K, 12L13, tensile strength 550 to 700 N/mm2 Surface: zinc plated and chromated, on request: blanc, oiled or phosphated and oiled

On request:

stainless series, stainless steel to 1.4305, Aisi 303 ES-Bolt not in stainless steel available

Ordering Details: Fork Head:

e.g. Form G with bore size d1 = 12mm, split length g = 24mm: Fork Head DIN 71752-G12x24

Fork Ball Joint:

e.g. Fork Ball Joint with Cotter Bolt, with bore size d1 = 12mm, split length g = 24mm: Fork Ball Joint DIN 71751-A12x24

e.g. Left Hand Thread: DIN 71752-G12x24LH and DIN 71751-A12x24LH

FLURO-Gelenklager GmbH

73

Rubber Seals RERS

B

Rubber Protector Cap Type

6 8 10 12 14 16 18 20 22 25 30 35

RERS RERS RERS RERS RERS RERS RERS RERS RERS RERS RERS RERS

1 1 2 2 3 3 3 4 4 4 5 5

Spacers Type* DR DR DR DR DR DR DR DR DR DR

6 8 10 12 14 16 18 20 22 25

D1

D

D1

B

M

A

6 8 10 12 14 16 18 20 22 25

8,7 10,3 12,5 15,0 16,8 19,0 21,8 24,3 25,7 29,7

6 6 6 8 8 8 8 10 10 10

4 4 4 6 6 6 6 8 8 8

11 12 14 17 19 21 25 28 29 33

RELS

M1

D

Washer Seals Rubber Seals vulcanized to stainless steel washer rings

A

* Spacers separately on request

Rod End Size

D1

Protects against dust, chemical substances and aggressive environment. Resistant to oil, grease, saltwater, chemical components and other substances. Temperature range from -20° till +120° Celsius or -4° till +248° Fahrenheit. Can be completely filled with grease. Mounted easily with Seeger retaining pliers

A D

Rubber Protector Caps made from Neoprene

M

M B

Prevents dirt entering the mating surface. Easily mounted. Temperature resistant up to +110° Celsius or +230° Fahrenheit

74

Rod End / Spherical Plain Bearing size 5 6 8 10 12 14 16 18 20 25 30

Washer Seal Type

D

D1

B

M

M1

RELS 5 RELS 6 RELS 8 RELS 10 RELS 12 RELS 14 RELS 16 RELS 18 RELS 20 RELS 25 RELS 30

5,25 6,25 8,25 10,25 12,25 14,25 16,25 18,25 20,25 25,25 30,25

8,3 9,5 12,4 13,5 18,5 18,5 22,4 22,6 25,2 33,8 55,9

2,4 3,1 5,1 5,6 6,4 6,4 6,8 8,3 10,2 12,7 14,0

0,50 0,69 1,20 1,20 1,20 1,20 1,20 1,20 1,20 1,50 1,50

0,8 0,9 1,4 1,4 1,7 1,7 1,7 1,7 1,7 2,3 2,3

FLURO-Gelenklager GmbH

A 11,2 12,7 17,8 20,3 28,6 28,6 31,7 32,7 38,1 53,3 56,7

Standard Thread Pitch M ... Thread SW x0,4 x0,5 x0,7 x0,8 x1,0 x1,25 x1,5 x1,75 x2,0 x2,5 x3,0 x4,0 Pitch M 3 (M 3x0,5) 5,5 X M 4 (M 4x0,7) 7,0 X M 5 (M 5x0,8) 8,0 X M 6 (M 6x1) 10,0 X M 8 (M 8x1,25) 13,0 X X M 10 (M10x1,5) 17,0 X X X M 12 (M 12x1,75) 19,0 X X X M 14 (M 14x2) 22,0 X M 16 (M 16x2) 24,0 X X M 18 (M 18x2,5) 27,0 X M 20 (M 20x2,5) 30,0 X X M 22 (M22x2,5) 32,0 X M 24 (M 24x3) 36,0 X M 27 (M 27x3) 41,0 X M 30 (M 30x3,5) 46,0 X M 36 (M 36x4) 55,0 X X M 39 (M 39x4) 60,0 X M 42 (M 42x4,5) 65,0 X X M 45 (M 45x4,5 70,0 X M 48 (M 48x5) 75,0 X M 52 (M 52x5) 80,0 X M 56 (M 56x5,5) 85,0 X M 64 (M 64x6) 95,0 X

SW SW

SW SW

m2 m2

m2 m2

SW SW

Jam Nuts with right or left hand thread. Steel zinc plated or stainless Steel A2

m1 m1

Narrow Form DIN 439 / 936

SW SW

Normal Form DIN 934 / ISO 4032

m1 m1

Jam Nuts to DIN 934 / 439

Nominal Size

ISO 4032/DIN934 ISO 4036/DIN439



2,4 0,4 1,8 0,3 3,2 0,8 2,2 0,6 4,0 1,2 2,7 0,8 5,0 2,4 3,2 1,5 6,5 5,1 4,0 3,1 8,0 11,1 5,0 6,9 10,0 16,3 6,0 9,8 11,0 24,0 7,0 15,0 13,0 32,0 8,0 19,5 15,0 47,0 9,0 28,0 16,0 61,0 10,0 38,0 18,0 75,0 11,0 46,0 19,0 104,0 12,0 66,0 22,0 158,0 13,5 96,0 24,0 219,0 15,0 137,0 29,0 370,0 18,0 230,0 31,0 470,0 19,5 300,0 34,0 610,0 21,0 380,0 36,0 750,0 22,5 470,0 38,0 910,0 24,0 580,0 42,0 1130,0 26,0 700,0 45,0 1350,0 28,0 840,0 51,0 1850,0 32,0 1160,0

m1

Weight g m2 Weight g

X) available ex stock, Standard Form only with standard thread in stock

Materials: Thread:

Steel zinc plated, strength grade: 04 or better A2 is equivalent to stainless steel 1.4301, Aisi 304 and 1.4303, Aisi 305 or alternative material Right hand or left hand threads

Remarks:

Across-flats dimension SW, Weight, Width m1/m2 and Chamfer can differ from the table above and the DIN, because of different manufacturing methods Jam Nuts DIN 439 according to ISO 4036 (without chamfer) or ISO 4035 (with chamfer). Jam Nuts DIN 439 Fine Thread according to ISO 8675 (with chamfer).

Ordering e.g. Jam Nut M 10 Left Hand (Normal Form with standard thread) in stainless steel A2: Details: Jam Nut DIN 934-M10-A2-Left Hand e.g. Jam Nut M 39x3 Right Hand (Narrow Form) in Steel, zinc plated: Jam Nut DIN 439-M39x3-04

FLURO-Gelenklager GmbH

75

Marine / Food Processing and Chemical Application Rod Ends / Spherical Plain Bearings with high corrosion resistance

For use in marine applications and high corrosive environments

Standard Series in sizes 6 to 35 mm: Version:

maintenance free, female or male thread, right or left hand thread dimensions identical with data sheets on pages 32, 33 and 47

Materials: Housing:

stainless steel to 1.4057, Aisi 431 forged, polished

Insert:

stainless steel to 1.4571, Aisi 316Ti with PTFE liner with stainless steel fabric

Ball:

stainless steel to 1.4401, Aisi 316 ground, polished

Explanation: The high strength housing combined with high corrosion resistance enables the usage for a variety of applications. Likewise with other stainless steel material, depending on the substances causing corrosion the danger of corrosion still exists, e.g. galvanic corrosion (bimetallic or contact corrosion), crack corrossion, opening corossion, stress crack corrosion etc. To achieve a higher corrosion protection the following constructional measures are to be observed: - protection against substances causing corrosion: RERS or RELS seals, FLURO® catalogue page 74 - prevent uncontrollable current, e.g. leakage current - cathodic corrosion protection, e.g. sacrificial anode - avoid cracks (crack corrosion) - connecting components and material of corresponding material, no potential difference On request:

76

For applications with highest corrosion protection and on request FLURO® can offer Rod Ends and Spherical Plain Bearings to DIN or to customer specifications to all common materials e.g. stainless steel to 1.4542 (17-4Ph), 1.4462, 1.4539, 2.4856 (INCONEL Alloy 625), bronze, Alu bronze, Titanium, just to list a few.

FLURO-Gelenklager GmbH

Precision Parts

Martin Höhn GmbH

Höhn Precision Parts - this name represents quality production. Fourty years of experience guarantee the companies reliable capability. The continuously modernized machine park enables a flexible and economic production of turned and machined parts. Variety for Höhn does mean that besides the turning, machining and grinding of parts, also complete components and assemblies are manufactured. In agreement with the TÜV Southwest, Höhn received stamp authorization for continued re-stamping of material specification 3.1.B. since 1981. Höhn achieved also the DIN EN ISO 9001:2000 certification.

This connecting rod with bearing for carriages shows a constructive solution through the close cooperation between Höhn and Fluro®.

5-axial symmetric machining (3-D measuring machine) Production of all sorts of shafts, Ø 20 to Ø 120 x 1000 mm length. Surface finish according to customer requirements.

Höhn processes all sorts of steel e.g.: Titan, Hasteloy, 17-4Ph, non-iron and non-ferrous heavy metal. Though constant stock of stainless steel material such as 1.4104, Aisi 430F, 1.4301, Aisi 304, 1.4305, Aisi 303, 1.4571, Aisi 316Ti, 1.4541, Aisi 321 a prompt delivery response is guaranteed.

Machining of the rod from Ø 10 to Ø 80 mm, chucking parts from Ø 10 to Ø 300 mm.

FLURO-Gelenklager GmbH

77

Inquiry Template Special Parts

Fax to: +49 (0) 74 28 / 93 85-25



































78

FLURO-Gelenklager GmbH

Custom-Made Products

FLURO-Gelenklager GmbH

79

Rosenfeld is situated between the city of Stuttgart and the lake Bodensee, in southern Germany. You can get to us easily from the international airport of Stuttgart by car. Drive Highway A81 south (towards Singen), exit at Oberndorf and follow the road to Rosenfeld. Our company’s plant is situated in the midst of an industrial area on the right hand side behind the town’s entrance. We invite you to pay a visit at our manufacturing plant to see our capability.

Frankfurt Mannheim

Heilbronn

Würzburg

Karlsruhe

Nürnberg

Stuttgart

Baden-Baden

Ulm München

Tübingen

Offenburg Abfahrt Oberndorf/Rosenfeld Ausfahrt 33

Rosenfeld Balingen

Oberndorf Rottweil

FLURO

Freiburg

Singen Schaffhausen

Basel

This is how you can get to us.

FLURO-Gelenklager GmbH

Konstanz Winterthur

Bodensee

Zürich

Siemensstrasse 13 D-72348 Rosenfeld / Germany Phone +49 (0) 74 28 93 85-0 Fax +49 (0) 74 28 93 85-25 www.fluro.de E-Mail: [email protected]