REVERSE OSMOSIS SYSTEMS

... pure water by design

REVERSE OSMOSIS SYSTEMS Introducing the Osmopure Range of professional, compact reverse osmosis systems from Filtrex. All Osmopure filter systems are designed to ‘plug-in’ and produce purified water however installation, commissioning and service can be provided by Filtrex to ensure peace of mind and correct operation and optimization of the system. We have an extensive range of membranes and systems to deliver extraordinarily high rejection rates (99%) to safeguard applications requiring exacting levels of purified water. Spiral wound technology separates the dissolved impurities form water through the use of pressure and a semi-permeable membrane. This process has revolutionized a wealth of industries including: microelectronics, food and beverage, medical and pharmaceutical. Please call our sales team to discuss your individual requirements.

The process of Reverse Osmosis (RO) made simple... Inlet

System Control managing system performance Sediment Removed using fibrous media

Chlorine & Organics Removed using carbon

Concentrate re-circulation option

Concentrate water high in dissolved salts

Diluted Salts Removed using membrane media

Permeate pure water

Filtrex Environmental T: 01279 457590 F: 01279 457591 E: sales@filtrex.co.uk W: www.filtrex.co.uk

The difference between reverse osmosis and osmosis OSMOSIS natural phenomenon

REVERSE OSMOSIS with applied pressure Applied pressure to overcome osmotic pressure results in reverse osmosis

Semipermeable Membrane

Semipermeable Membrane

OSMOTIC PRESSURE

Dilute Solution

Concentrated Solution

Concentrated Solution

Dilute Solution

OP-F Modular RO Filter

OP-M

Custom design modular reverse osmosis system for light-commercial application.

Complete on-demand RO water system.

Cleverly designed framework connects the ‘Membrane and Filter Modules’ by simply ‘clicking’ them into place. With further modules effortlessly affixed, sither side-by-side or stacked, until the application’s water requirements are met.  Maximum operating temperature: 32°C (90°F)  6.2 bar (90 psi)  Average Rejection Rate - 94%

The Merlin system incorporates two high-flow membrane elements in series to produce an average of 1.9 lpm of purified water. With the concentrate from one element being channelled through the second, the waste water is reduced by approximately 75% compared to conventional systems.  Maximum operating temperature: 37.7°C (100°F)  5.5 bar (80 psi)  Average Rejection Rate - 93%  Mains fed pump not usually required

Filtrex Environmental T: 01279 457590 F: 01279 457591 E: sales@filtrex.co.uk W: www.filtrex.co.uk

OP-DLX Range The OP-DLX Range of Reverse Osmosis units have been optimally configured to give the best possible system choice in terms of integration, flexibility and application requirements for an efficient and dependable operation. All systems offer minimal energy consumption, lower maintenance and operation costs, and yield higher flow, recovery and rejection rates.

RO System Configuration Control panel Managing system performance.

Sediment pre-filters 1 or 5 micron cartridges remove large particulate.

Membranes Contain HF4 membranes, producing more permeate water and major energy savings.

Carbon pre-filter Removes the chlorine and organics that reduce membrane integrity.

Configuration  Free standing, corrosion-resistant aluminium frame  PVC pressure vessels  HF4 extra-low pressure membranes  5 micron 10”/20” sediment pre-filter  10 micron 10”/20” carbon block pre-filter  Fluid-O-Tech brass rotary vane pump Controls  Manual on/off control switch  Feed low pressure switch 15-30 psi  Feed solenoid valve with manual bypass

Membrane vessels PVC vessels are designed for easy access to membranes and quick change-outs. These vessels are corrosion resistant.

Frame Pump Durable, lightweight, Reliable, quiet, low-energy corrosion-resistant aluminium. pumps are used. Instruments Stainless Steel concentrate valve  Pump and pre-filter pressure gauges  Permeate flow meter  Concentrate flow meter Deluxe Options  Concentrate recycle valve  LED controller  Minitrol IF computer controller  HM Digital QC-1 conductivity meter  HM Digital PS-202 dual permeate & feed TDS controller 

Filtrex Environmental T: 01279 457590 F: 01279 457591 E: sales@filtrex.co.uk W: www.filtrex.co.uk

OP300DLX

OP1000DLX

Space saving compact RO system.

Commercial level RO water system.

The OP300 system has been designed for capacities up to 1,130 litres per day, with maximum TDS rejection rates of 1000 ppm. This system features high quality components and is supplied readyto-use in either a compact wall mounted or free standing sapce saving configuration.  Maximum operating temperature: 40°C (105°F)  Average Rejection Rate - 98.5%  Permeate flow (lph) - 47

Consuming minimal energy this simple, low maintenance RO solution, available in standard or deluxe formats, delivers the right balance between performance and cost. Opt for the deluxe configuration and benefit from water recovery rates of up to 75%.  Maximum operating temperature: 40°C (105°F)  Average Rejection Rate - 98.5%  Permeate flow (lph) - 156

OP2000DLX

OP7000DLX

High capacity RO water system.

Optimum system configuration for commercial high flow applications.

Capable of flow rates of up to 9,500 litres per day, the OP2000 system comes ready-to-use with a host of standard features. For enhanced functionality, control and flexibility specify the OP2000 deluxe and also benefit from a 34% drop in water consumption with the inclusion of a concentrate recirculation valve.  Maximum operating temperature: 40°C (105°F)  Average Rejection Rate - 98.5%  Permeate flow (lph) - 395

The OP7000 RO system has been especially designed to create the most favourable arrangement to deliver value for money, enhanced performance and control capabilities.  Maximum operating temperature: 40°C (105°F)  Average Rejection Rate - 98.5%  Permeate flow (lph) - 1100

Filtrex Environmental T: 01279 457590 F: 01279 457591 E: sales@filtrex.co.uk W: www.filtrex.co.uk

OP10000DLX & OP20000DLX Industrial RO systems for high purity, high volume applications. Offered with an array of control features both these systems are fully adaptable to deal with fluctuating seasonal and water quality variations. Equipped witha concentrate recirculating valve, both systems will reduce water wastage by recycling a variable proportion of the circulate to deliver greater efficiencies and cost savings. Ideal for applications such as cosmetic, pharmaceutical drug manufacture, large scale DI plants, boiler water feed, steam sterilizing or any application that requires high volumes of extremely pure water.  Maximum operating temperature: 40°C (105°F)  Average Rejection Rate - 98.5%  OP10000DLX Permeate flow (lph) - 1575  OP20000DLX Permeate flow (lph) - 3150

OP Seawater RO System Specifically designed for salt water use. Osmopure Seawater RO Systems are engineered to reduce energy consumption and improve overall peak performance. High rejection rates ensure the best quality water at minimal maintenance and operational costs. Its space saving design means it’s ideal for use across a wide variety of applications from water irrigation to marine desalination. Engineered for heavy or continuous service for land or marine based applications where quality, performance and dependability are key. Production capacities range from 2,280 - 8,360 litres per day.

Filtrex Environmental T: 01279 457590 F: 01279 457591 E: sales@filtrex.co.uk W: www.filtrex.co.uk

Mobile Fluid Filtration Units Trolley mounted filtration and pump systems Ideal for emergency off-line filtration or routine cleaning of fluid storage vessels, cooling systems etc. 

Fitted with isolation valves, flow meter, suction and delivery hose, associated fittings.



‘Bag’ or ‘Cartridge’ systems with filtration from 1000 micron to 0.1 micron - absolute filtration.



High Capacity Bag Filtration with cost effective elements allowing staged cleaning cycles.



Units are available in both aluminium and stainless steel.

Spares & Service Filtrex offers a wide range of membranes and elements to fit most Reverse Osmosis units. A fully customisable service is offered where we can provide you with the exact length of membrane you require, and private label branding to ensure repeat spares business. Flow meters, TDS meters, tubing and fittings are also available.

Filtrex Environmental T: 01279 457590 F: 01279 457591 E: sales@filtrex.co.uk W: www.filtrex.co.uk

FS 563880