Reproduction. Not for. Conquest Series Garden Tractors & Mower Decks. Parts Manual. 26HP Product. Manual Part No

n Parts Manual N o R tf ep o r ro du ct io Conquest Series Garden Tractors & Mower Decks 26HP Product Mfg. No. Description 2691092-00 Conquest,...
13 downloads 0 Views 4MB Size
n

Parts Manual

N o R tf ep o r ro du ct io

Conquest

Series Garden Tractors & Mower Decks

26HP Product Mfg. No.

Description

2691092-00 Conquest, 26HP Hydro 2WD and 52" Mower Deck 2691093-00 Conquest, 26HP Hydro 2WD w/PS and 52" Mower Deck

Manual Part No. 1756199 Revision Rev. Date:11/28/2012

n

N o R tf ep o r ro du ct io

Table Of Contents PRODUCT COMPONENTS

PAGES

N o R tf ep o r ro du ct io

n

Frame Group - Manual Steering .......................................................................................................................... Frame Group - Power Steering ............................................................................................................................ Steering Group - Manual Steering ....................................................................................................................... Steering Group - Power Steering & Hydraulic Lift ............................................................................................... Steering Group - Tilt Steering .............................................................................................................................. Engine Group - 24HP & 26HP, Twin ................................................................................................................... Transmission Group ............................................................................................................................................ Transmission SERVICE PARTS - Tuff Torq K66AC ........................................................................................... Transmission SERVICE PARTS - Tuff Torq K66L (After Serial No. 2000676240) ............................................. Controls Group - Cruise Control .......................................................................................................................... Controls Group ..................................................................................................................................................... Electrical Group ................................................................................................................................................... Hood, Grille & Dash Group .................................................................................................................................. Seat & Seat Deck Group - EVAP Compliant ....................................................................................................... Lift Group - Manual .............................................................................................................................................. Wheels & Tires Group ......................................................................................................................................... Decals Group - Brand & Model ............................................................................................................................ Decals Group - Safety & Common ...................................................................................................................... 52" Mower Deck - Clutch & Support Group ......................................................................................................... 52" Mower Deck - Height Adjustment & Roller Bar Group .................................................................................. 52" Mower Deck - Housing, Arbors & Blades Group ...........................................................................................

4 8 12 14 16 18 22 26 32 38 40 42 46 48 50 52 54 56 58 60 64

Torque Specification Chart ..................................................................... Inside Back Cover

Frame Group - Manual Steering NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

N o R tf ep o r ro du ct io

n

986747

The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

4

1756199

Frame Group - Manual Steering QTY. DESCRIPTION

1733139A 1923683 1960541 1723528A 1928352 1930644 1722602A 1923114 1921210 1726989A 1930645 1922755 1960103 1722541 1919262 1702779 1708236 1931350 1722626A 1722200A 1611705 1721682 1930650 2821133 1686985 2823485 1663151 1725112 2830671 1724264 1931352 1721752 1927531 1721918A 1721805A 1723502 1960086 1930591 1724801A 1931277 1722199 1919394 2832577 1933260

1 4 4 1 2 2 1 2 2 1 7 1 2 1 1 1 1 2 1 1 2 6 2 3 1 1 1 1 1 1 1 1 2 1 1 1 4 2 1 2 1 1 1 4

TOWER & SUPPORT ASSEMBLY CAPSCREW, Hex Washer Head Taptite, 3/8-16 x 3/4 CAPSCREW, Hex Washer Head Taptite, 5/16-18 x 3/4 SUPPORT, Seat Deck NUT, Hex Flange 3/8-16 Whiz Lock, Large NUT, Hex Flange Two-Way Lock, 1/2-13 BACKPLATE CAPSCREW, Hex Head 1/2-13 x 1, Black CAPSCREW, Hex Head 3/8-16 x 1, Black FRAME ASSEMBLY, Front & Rear NUT, Hex Flange Two-Way Lock, 3/8-16 WASHER, 3/8, Black WASHER, 3/8, Black LINK, Drag NUT, Hex Jam 1/2-20 JOINT, Ball SPACER, 3/8 x 1/2 x 5/8 CARRIAGE BOLT, 3/8-16 x 1 ROD, Tie AXLE ASSEMBLY w/LH Spindle (Includes Ref. Nos. 22, 24, 41, 42 & 43) SPACER, 25/64 x 5/8 x 5/16, Powder Metal BUSHING, 31/32 x 1-1/4 x 3/4, Powder Metal NUT, Hex Flange Two-Way Lock, 7/16-14 FITTING, Lube SPINDLE REPLACEMENT KIT, LH (Includes Ref. Nos. 22, 26, 27, 28, 29 & 30) CAPSCREW, 3/8-16 x 7/8, GR8 WASHER, Spring, 3/8 HUB & ARM ASSEMBLY KEY, Woodruff SPINDLE, LH CARRIAGE BOLT, 3/8-16 x 1-1/2 SPACER, 11/16 x 21/32 x 2 3/32 CAPSCREW, Hex Head, 7/16-14 x 2 G8 HOOK, "J" BUMPER, Black BUMPER, Chrome SCREW, Truss Head Torque Drive, 5/16-18 x 7/8 CAPSCREW, Hex Whiz Lock, 5/16-18 x 3/4 PLATE, Axle Wear NUT, Hex Flange Whix Lick, 5/16-18 SPINDLE, RH WASHER RETAINING RING CAPSCREW, Hex Flange Whiz Lock, 3/8-16 x 3/4

N o R tf ep o r ro du ct io

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 35 36 37 38 39 40 41 42 43

n

REF NO PART NO.

Footnotes

The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

5

1756199

Frame Group - Manual Steering NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

N o R tf ep o r ro du ct io

n

986747

The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

6

1756199

Frame Group - Manual Steering REF NO PART NO.

QTY. DESCRIPTION

2821133 1960035 2860645 2860646 1722212A

2 2 1 1 1

FITTING, Grease for Wear Plate WASHER, 5/8 CAPSCREW, Hex Head, 5/8-11 x 3-1/2 NUT, Hex Flange Two-Way Lock, 5/8-11 PLATE, Axle

N o R tf ep o r ro du ct io

n

44 45 46 47 48

Footnotes

The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

7

1756199

Frame Group - Power Steering NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

N o R tf ep o r ro du ct io

n

987426

The above parts group applies to the following Mfg. Nos.: 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

8

1756199

Frame Group - Power Steering QTY. DESCRIPTION

1733765A 1733139A 1723528A 1722602A 1722212A 1721805A 1732937A

1 1 1 1 1 1 1

8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44

1721918A 1732759A 1733044A 1721752 1611705 1702779 1719725 1919262 1930645 1732439 1931350 1704314 1930650 1732208 1927531 2860645 1960035 1933260 1664847SM 2860646 1923683 2860668 1928352 1923114 1921210 1960086 1724801A 1930591 1931277 2821133 1924856 1733912A 1924366 1960713 1960714 1960339 1733851

1 1 1 1 2 1 1 1 4 1 2 3 2 1 2 1 2 4 4 1 4 2 2 2 2 4 1 2 2 2 4 1 2 1 1 2 1

FRAME ASSEMBLY, Front & Rear TOWER & SUPPORT ASSEMBLY SUPPORT, Seat Deck BACKPLATE, Hitch PLATE, Axle Support BUMPER AXLE, SPINDLES & BUSHINGS ASSEMBLY (Includes Ref. Nos. 19, 21, 44, 45, 46, 47, 48, 49 & 50) HOOK, "J" ROD, Tie, Flat Ends SUPPORT, Steering Unit SPACER, Powdered Metal SPACER JOINT, Ball, 1/2-20 Thread SPACER NUT, Hex Jam, 1/2-20 NUT, Hex Flange, 3/8-16 Two-Way Lock CYLINDER, Hydraulic Steering CARRIAGE BOLT, 3/8-16 x 1 G5 FITTING, Lube 1/4 Drive NUT, Hex Flange 7/16-14 Two Way Lock SPACER, Powdered Metal CAPSCREW, Hex Head 7/16-14 x 2 G8 CAPSCREW, Hex Head 5/8-11 x 3-1/2 G5 WASHER, 5/8 SCREW, Hex Whiz Lock Flange 3/8-16 x 3/4 SCREW, Hex Washer Head Taptite 5/16-18 x 3/4 NUT, Hex Flange 5/8-11 Two Way Lock SCREW, Hex Washer Head Taptite 3/8-16 x 3/4 NUT, Hex Flange 1/2-13 Whiz Lock NUT, Hex Flange 3/8-16 Whiz Lock Large CAPSCREW, Hex Head 1/2-13 x 1 G5 CAPSCREW, Hex Head 3/8-16 x 1 G5 SCREW, Truss Head Torx Drive 5/16-18 x 7/8 PLATE, Axle "U" Form SCREW, Hex Whiz Lock Flange 5/16-18 x 3/4 NUT, Hex Flange 5/16-18 Whiz Lock FITTING, Lube 1/4 Drive SCREW, Hex Washer Head Taptite 5/16-18 x 1/2 SPACER WASHER, 5/8 CAPSCREW, Hex Head NUT, Hex Toplock NUT, Hex Flange, Machine Lock 3/8-16 AXLE, Front Casting

N o R tf ep o r ro du ct io

1 2 3 4 5 6 7

n

REF NO PART NO.

Footnotes

The above parts group applies to the following Mfg. Nos.: 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

9

1756199

Frame Group - Power Steering NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

N o R tf ep o r ro du ct io

n

987426

The above parts group applies to the following Mfg. Nos.: 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

10

1756199

Frame Group - Power Steering REF NO PART NO.

QTY. DESCRIPTION

1960355 1732939 1721682 1919394 2832577 1734531

1 1 6 1 2 1

NUT, Hex Lock ESNA Heavy 1/2-13 SPINDLE & ARM ASSEMBLY, R.H. BUSHING, Axle WASHER, 1 RING, Retaining, Extension SPINDLE & ARM ASSEMBLY, L.H.

N o R tf ep o r ro du ct io

n

45 46 47 48 49 50

Footnotes

The above parts group applies to the following Mfg. Nos.: 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

11

1756199

Steering Group - Manual Steering NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

N o R tf ep o r ro du ct io

n

985890

The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

12

1756199

Steering Group - Manual Steering QTY. DESCRIPTION

1722318 1722319 1725024 1960540 1722749 1960114 2176440 1960636 1721736A 1933988 1960655 1724470A 1960032 1930645 1664847SM 1721626 1611710 1722459 1722461 1931211 1933260 1960033

1 1 1 1 1 5 2 2 1 2 2 1 1 1 2 1 1 1 1 2 2 1

STEERING WHEEL, Straight, Shaft CAP, Steering Wheel, Simplicity (Decal Not Included) CAP, Steering Wheel, Plain PIN, Spring, 5/16 x 2-1/2 COVER, Rubber, Upper Steering Shaft WASHER, 3/4 BUSHING, 15/32 x 7/8 x 7/8, Nylon NUT, Hex KEPS 5/6-18 PLATE, Mounting Steering NUT, Push CARRIAGE BOLT, 5/16-18 x 1-1/4 GEAR & SHAFT ASSEMBLY, Steering CAPSCREW, Hex Head, 3/8-16 x 1-1/4, Black NUT, Hex Flange Two-Way Lock, 3/8-16 CAPSCREW, Hex Washer Head Taptite, 5/16-18 x 3/4 SHAFT & PINION ASSEMBLY, Steering Manual RING, Clipring Extension BEARING, 3/4 x 1-11/16 x 13/16, 3" Long Housing SPACER, 3/4 x 1-1/16 x 3/8, Powder Metal NUT, Hex Flange Whiz Lock, 3/8-16, Small CAPSCREW, Hex Whiz Lock Flange, 3/8-16 x 3/4, Black CLIP, Hairpin

N o R tf ep o r ro du ct io

1 2 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

n

REF NO PART NO.

Footnotes

The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

13

1756199

Steering Group - Power Steering & Hydraulic Lift NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

N o R tf ep o r ro du ct io

n

987528

The above parts group applies to the following Mfg. Nos.: 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

14

1756199

Steering Group - Power Steering & Hydraulic Lift REF NO PART NO.

QTY. DESCRIPTION

1733409 1916964 2860444 1722138 2825094 1733727 1931646 1722123 1719168 1719169 1722297 1733230 1733413 1733791 1733780 1733212 1733582

1 4 4 1 2 1 2 4 1 1 1 2 1 1 1 1 1

POWER STEERING UNIT, 32CC, 4 Ports LOCKWASHER, Spring CAPSCREW, Hex Head TUBE, Hydraulic TIE, Self Locking TUBE, Hydraulic SCREW, Hex Whiz Lock Flange 1/4-20 x 1/2 FITTING, Straight FILTER, Oil BASE, Oil Filter TUBE, Hydraulic FITTING, Hose Elbow Perma Push 9/16-18 HOSE ASSEMBLY, 50" Port R HOSE ASSEMBLY, 18" Port T HOSE ASSEMBLY, 26" Port P HOSE ASSEMBLY, 46" Port L POWER STEERING ASSEMBLY, 32CC, 4 Ports (Includes Ref. Nos 1, 25, 26, 27 & 28)

N o R tf ep o r ro du ct io

n

1 2 3 4 5 6 7 8 9 10 11 12 25 26 27 28 29

Footnotes

The above parts group applies to the following Mfg. Nos.: 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

15

1756199

Steering Group - Tilt Steering NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

N o R tf ep o r ro du ct io

n

987424

The above parts group applies to the following Mfg. Nos.: 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

16

1756199

Steering Group - Tilt Steering REF NO PART NO.

QTY. DESCRIPTION

1733363 1724685A 1960655 1725294 1723898 1933988 1960636 1734002 1724368 1725024 1960576

1 1 2 1 2 2 2 1 1 1 1

STEERING WHEEL PLATE, Steering Mounting BOLT, Carriage, 5/16-18 x 1-1/4, G5 ADAPTER SPACER, Flat NUT, Push Pal NUT, Hex Keps 5/16-18 STEERING UNIT, Tilt BELLOWS, Tilt Steering Unit w/Slot CAP, Steering Wheel NUT, Hex Lock ESNA Light 5/8-18

N o R tf ep o r ro du ct io

n

1 4 5 6 7 8 9 10 11 12 15

Footnotes

The above parts group applies to the following Mfg. Nos.: 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

17

1756199

Engine Group - 24HP & 26HP, Twin NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

N o R tf ep o r ro du ct io

n

2989520

The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

18

1756199

Engine Group - 24HP & 26HP, Twin QTY. DESCRIPTION

44M777-2165-G 44P777-0184-G5 1734166 1751237 1723165 1722388A 1924856 1737747 791850 1734985 1701011 1722392A 1721706 1722390A 1960295 2834683 1722389A 1927428 1722414A 1960368 1935255 2820427 2830598 1720463 1732576 1708264 1918199 1960649 1736105 2832747 1925003 1737421A 1924940 2830598 5025299X4 5025126 ----1917356

1 1 1 1 1 1 2 1 2 1 1 2 1 1 8 2 1 8 1 8 2 1 1 1 1 1 1 1 1 2 2 1 2 1 2 2 2 4

* ENGINE, 24HP Briggs & Stratton Pro Series Twin (Engine Model: 44M777-2165-G5) * ENGINE, 26HP Briggs & Stratton Professional Series (Engine Model: 44P777-0184-G5) EDGING, Airduct (24 HP Models Only) SEAL, Foam (26 HP Models Only) HOSE, Oil Drain HEAT SHIELD CAPSCREW, Hex Head, Taptite, 5/16-18 x 1/2 THROTTLE CONTROL (24HP & 26HP Models) CLAMP, Hose, Wire HOSE, Fuel TIE, Self Locking, 7-5/16 Long SHIELD, Side, Heat MUFFLER ASSEMBLY (24HP & 26HP Models) DUCT, Muffler Extension (24HP & 26HP Models) CAPSCREW, Hex, Whiz Lock, 1/4-20 x 5/8 CLIP, Wire DUCT, Muffler Top CAPSCREW, Hex Head Taptite, 1/4-20 x 3/8 SHIELD, Muffler Bottom NUT, Speed, 1/4-20 NUT, Speed, 3/8-18 WASHER, Locking, External Teeth, 3/8 CAPSCREW, Hex Head, Taptite, 3/8-16 x 1-1/2 KEY, 1/4 x 2-1/2 PULLEY & HUB ASSEMBLY, Engine WASHER, Hex, 7/16 x 1-1/2 WASHER, Locking, 7/16 CAPSCREW, Hex Head 7/16-20 x 3-1/2 CLUTCH, Electric TIE, Self Locking CAPSCREW, Hex Head Taptite, 1/4-20 x 1/2 GUIDE, Belt Retainer, Clutch WASHER, Flat, 3/8 CAPSCREW, Hex Head, Taptite, 3/8-16 x 1.5 CAPSCREW, Allen Head 1/4-20 NUT, Hex Flange, 1/4-20 * GASKET LOCKWASHER, 5/16

N o R tf ep o r ro du ct io

1 1 2 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 34 35 37 38

n

REF NO PART NO.

Footnotes Note* See your local Briggs & Stratton distributor for parts and service.

The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

19

1756199

Engine Group - 24HP & 26HP, Twin NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

N o R tf ep o r ro du ct io

n

2989520

The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

20

1756199

Engine Group - 24HP & 26HP, Twin REF NO PART NO.

QTY. DESCRIPTION

2860660 1723894

4 1

CAPSCREW, Socket Head, 5/16-18 x 7/8, G8 EDGING, Rubber

N o R tf ep o r ro du ct io

n

39 42

Footnotes Note* See your local Briggs & Stratton distributor for parts and service.

The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

21

1756199

Transmission Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

N o R tf ep o r ro du ct io

n

986602

The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

22

1756199

Transmission Group QTY. DESCRIPTION

1960676 1722174 1722173 1704351 1928352 1960637 1931350 1960686 1721728A 1676148 1924940 1922130 1722460 1722151 1918267 1721360 1716289 1669105 1723126 1721622 1921210 1722903 1919326 1960590 1722152 1921333 1722383 1721952

2 1 1 15 2 6 6 7 2 2 3 1 6 1 3 1 1 1 1 1 1 1 2 4 1 1 1 1

30

1733941

1

30

1733208

1

31 32 33 34 35 36 37 38 39 40 41 42

1918447 1721424 1722684 8191045 1960687 1960027 1722648 1726757 1721392 1722194 1719968 1719233

1 1 1 1 2 1 1 1 1 1 1 1

SCREW, Pan Head Torx Taptite, 1/4-20 x 1-1/4 PAD, Footrest, LH, Differential Lock PAD, Footrest, RH FASTENER, 11/16" Long, Stem Plastic NUT, Hex Flange Whiz Lock, 3/8-16, Large NUT, Hex KEPS, 3/8-16 CARRIAGE BOLT, 3/8-16 x 1 NUT, Hex Flagne ESNA, 5/16-18 SUPPORT BUSHING, 5/8 x 3/4 x 13/32, Powder Metal WASHER, 3/8 CAPSCREW, Hex Head, 3/8-16 x 2-1/4 PIN, Quick ROD, Differential Lock, 15-3/16 Long WASHER, 7/16 ROD & TUBE ASSEMBLY, Differential Lock Pedal KNOB SPACER, 25/64 x 5/8 x 1-1/2, Hardened KNOB, 3 Sided Soft ROD, Free Wheel, 18-3/16 Long CAPSCREW, Hex Head, 3/8-16 x 1, Black PIVOT ASSEMBLY, Differential Lock WASHER, 5/16, Black CAPSCREW, Hex Head, 5/16-18 x 3 ROD, Differential Latch, 2 Bends, 6-3/16 Long CAPSCREW, Hex Head, 5/16-18 x 1 ARM, Differential Lock TRANSMISSION ASSEMBLY, K66L Transmission (Used on models with tranmission expansion tank, attached or mounted to transmission.) TRANSMISSION ASSEMBLY, K66L Transmission (Used on models with tranmission expansion tank, attached or mounted to transmission.) TRANSMISSION ASSEMBLY, K66AC Transmission (Used on models with remote expansion tank Ref. No. 51) PIN, Cotter, 3/4, Black ROD, Brake, 17-27/64 Long SPRING, Compression SPRING, Compression NUT, Hex Flange ESNA, 3/8-16 WASHER, Flat, 1/2 BEARING, Nyliner ARM & WELD PINS ASSEMBLY, Control K66 V-BELT PULLEY & HUB ASSEMBLY, Transmission NUT, Hex Flange, M10-1.5, Nylon Insert FAN, 5 Blades, 3 Holes

N o R tf ep o r ro du ct io

1 2 3 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 26 27 28 29 30

n

REF NO PART NO.

Footnotes

The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

23

1756199

Transmission Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

N o R tf ep o r ro du ct io

n

986602

The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

24

1756199

Transmission Group REF NO PART NO.

QTY. DESCRIPTION

1931335 1960141 1721593A 1921719 1727215A 1924856 1722711 1722430 1723214 1722468

1 1 1 1 1 2 1 1 2 1

CARRIAGE BOLT, 5/16-18 x 1 WASHER, 5/16 STRAP, 4-1/4 Long CAPSCREW, Hex Head, 5/16-18 x 2-1/2 ACTUATOR, Switch CAPSCREW, Hex Head Taptite, 5/16-18 x 1/2 CAP, Expansion Tank Plastic (Used on models with tranmission expansion tank.) TANK, Oil Natural (Used on models with tranmission expansion tank.) CLAMP, Hose Worm Drive #20 1-3/4" (Used on models with tranmission expansion tank.) HOSE, Expansion Tank Formed (Used on models with tranmission expansion tank.)

N o R tf ep o r ro du ct io

n

44 45 46 47 48 49 50 51 52 53

Footnotes

The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

25

1756199

Transmission SERVICE PARTS - Tuff Torq K66AC NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

N o R tf ep o r ro du ct io

n

1733208

The above parts group applies to the following Mfg. Nos.: 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

26

1756199

Transmission SERVICE PARTS - Tuff Torq K66AC QTY. DESCRIPTION

1733208SM ------------1724696SM 1718226SM 1720761SM 1718065SM 1720796SM 1708650SM 1707786SM 1708651SM 1724695SM ----1707789SM ----1718076SM 1708691SM 1718070SM 1724698SM --------1708672SM 1708673SM --------1718084SM 1724701SM 1722223SM 1724702SM --------------------1720418SM 1718061SM ----1718039SM 1724704SM 1724705SM ----1718100SM 1718120SM

TRANSMISSION, Tuff Torq K66AC *KIT, Upper Case *LOWER CASE *FITTING KIT OIL CAP M20B PLASTIC CAP SCREW 8 * 75 FILTER MAGNET WASHER, Seal, 10 SNAP RING C 35 O-RING P18 SEAL TC 153507 BOLT, 8 * 20 *KIT, Drain Bolt *SCREW, Tapping, 8 * 30 *CENTER CASE AB E-RING 15 0-RING, 1A P10A PIN 3 * 9.8 BOLT, 10 * 65 *KIT, Cylinder Block *PUMP SHAFT SNAP RING S15 BEARING, 6202C3 *MOTOR HOUSING *THRUST BEARING WASHER, 12 * 24 * 1 MOTOR SHAFT/GEAR (10T) PIN 3 * 13.8 BEARING, 6302DUC3 *PUMP SPRING *THRUST METAL *SWASH PLATE ASSEMBLY *SPRING 25 *BYPASS SHAFT LEVER, Bypass SNAP RING 10 *SPRING PIN 3.0A * 20 SHOCK ABSORBER K65 STAY PIN *CONTROL LEVER A ROLL PIN 6 * 40 SEAL TC 162606

N o R tf ep o r ro du ct io

1 2 3 5 6 7 8 9 11 12 13 14 15 16 17 18 19 20 21 23 24 25 26 27 28 29 31 32 35 36 37 38 39 43 44 45 46 47 48 49 50 51 54 59

n

REF NO PART NO.

Footnotes *Note: See your local authorized dealership for parts and warranty or contact Tuff Torq at www.tufftorqservices.com (U.S. 1866-572-3441 Int'l 01-423-585-1977) The above parts group applies to the following Mfg. Nos.: 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

27

1756199

Transmission SERVICE PARTS - Tuff Torq K66AC NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

N o R tf ep o r ro du ct io

n

1733208

The above parts group applies to the following Mfg. Nos.: 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

28

1756199

Transmission SERVICE PARTS - Tuff Torq K66AC QTY. DESCRIPTION

----1721184SM 1708689SM 1707879SM 1708692SM ------------------------1724693SM ----1720859SM --------------------1724721SM 1724722SM 1724723SM ----------------1724728SM 1708690SM ----1707912SM ------------1736211SM 1720833SM 1720829SM 1720831SM 1723773SM ----1724741SM ------------1724734SM 1724735SM

*KIT, Control Shaft FULCRUM WASHER, 12 O-RING 1A P14 NUT 12 *KIT, Differential Gear *FINAL GEAR *FINAL PINION SHAFT *WASHER, 15 * 35 * 3.2 *REDUCTION GEAR 55T *FINAL PINION Gear (11T) BUSHING, 25.4 *AXLE SHAFT, Left RETAINING RING 23 *AXLE SHAFT, Right *BUSHING *KIT, Differential Lock / Gear *SEAL S 25.4 * 42 * 8 *THRUST WASHER BRAKE LEVER BRAKE RETURN SPRING BRAKE DISC *BRAKE SHOE *SHIM KIT *BRAKE *BRAKE SHAFT WASHER, 16 * 23 * 1.6 O-RING 1A P12 *SEALANT SNAP RING *KIT, Pump Case *CAP KIT *O-RING 1A 24040 FILTER BOLT, 8 * 45 CONNECTOR O-RING 6.1 O-RING *COLLAR 25.4 DIFFERENTIAL RETURN SPRING *DIFFERENTIAL LOCK FORK *DIFFERENTIAL LOCK LEVER *LEVER PIVOT SPRING HOOK LEVER CLIP

N o R tf ep o r ro du ct io

60 61 62 63 64 66 68 69 70 71 72 74 76 77 78 79 80 81 82 85 86 87 88 89 90 91 92 93 99 100 101 103 104 105 108 111 112 113 119 120 121 122 123 124 125

n

REF NO PART NO.

Footnotes

*Note: See your local authorized dealership for parts and warranty or contact Tuff Torq at www.tufftorqservices.com (U.S. 1866-572-3441 Int'l 01-423-585-1977) The above parts group applies to the following Mfg. Nos.: 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

29

1756199

Transmission SERVICE PARTS - Tuff Torq K66AC NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

N o R tf ep o r ro du ct io

n

1733208

The above parts group applies to the following Mfg. Nos.: 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

30

1756199

Transmission SERVICE PARTS - Tuff Torq K66AC REF NO PART NO.

QTY. DESCRIPTION

------------1724739SM ----------------1727538YP -----

* DIFFERENTIAL LOCK SLIDER *DIFF LOCK PIN *DIFF LOCK PLATE 0-RING, 1A G25 *ALIGNMENT SLEEVE 11 * 7 *CHARGE RELIEF VALVE *IMPLEMENT RELIEF VALVE *3RD CHECK VALVE *SEAL KIT, K66K, M, I, D, B *REPAIR KIT, K66 (K66B, D, I, M & V)

N o R tf ep o r ro du ct io

n

126 127 128 129 130 136 137 138 200 201

Footnotes *Note: See your local authorized dealership for parts and warranty or contact Tuff Torq at www.tufftorqservices.com (U.S. 1866-572-3441 Int'l 01-423-585-1977) The above parts group applies to the following Mfg. Nos.: 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

31

1756199

Transmission SERVICE PARTS - Tuff Torq K66L (After Serial No. 2000676240) NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

N o R tf ep o r ro du ct io

n

1733941

The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

32

1756199

Transmission SERVICE PARTS - Tuff Torq K66L (After Serial No. 2000676240) QTY. DESCRIPTION

1721952SM ----1724694SM 1724696SM 1718226SM 1720761SM 1718065SM 1720796SM 1708650SM 1724695SM ----1707789SM 1724697SM 1718076SM 1718070SM 1725633SM 1724698SM --------1708672SM 1708673SM ----1708675SM ----1718084SM 1724701SM 1722223SM 1724702SM 1708669SM 1708677SM ----------------1720418SM 1718061SM ----1718039SM 1724704SM 1724705SM 1724706SM 1718100SM ---------

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

TRANSAXLE, Tuff Torq K66L *KIT, Upper Case HOUSING, Lower CAP, M20B CAPSCREW, 8 x 75 FILTER MAGNET, Complete WASHER, Seal, 10 RING, Snap, C 35 BOLT, 8 x 20 *KIT, Drain Bolt SCREW, Tapping, 8 x 30 CASE, Center E-RING, 15 PIN, 3 x 9.8 FILTER BOLT, 10 x 65 *KIT, Cylinder Block *SHAFT, Pump RING, Snap, S15 BEARING *HOUSING, Motor BEARING, Thrust *CAP, Filter WASHER, 12 x 24 x 1 MOTOR SHAFT/GEAR (10T) PIN, 3 x 13.8 BEARING, 6302DUC3 SPRING, Pump BEARING, Thrust *ASSEMBLY, Swash Plate *KIT, Thrust Bearing *SPRING, 25 *SHAFT, Bypass LEVER, Bypass RING, Snap, 10 *SPRING PIN 3.0A x 20 SHOCK ABSORBER, K65 STAY PIN CONTROL LEVER A PIN, Roll, 6 x 40 *CHARGE SPRING *KIT, Control Shaft

N o R tf ep o r ro du ct io

1 2 3 6 7 8 9 11 12 15 16 17 18 19 21 22 23 24 25 26 27 28 29 30 31 32 35 36 37 38 39 40 43 44 45 46 47 48 49 50 51 54 56 60

n

REF NO PART NO.

Footnotes *Note: See your local authorized dealership for parts and warranty or contact Tuff Torq at www.tufftorqservices.com (U.S. 1866-572-3441 Int'l 01-423-585-1977) The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

33

1756199

Transmission SERVICE PARTS - Tuff Torq K66L (After Serial No. 2000676240) NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

N o R tf ep o r ro du ct io

n

1733941

The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

34

1756199

Transmission SERVICE PARTS - Tuff Torq K66L (After Serial No. 2000676240) QTY. DESCRIPTION

1721184SM 1708689SM 1708692SM ------------1724715SM 1724716SM 1724717SM 1724693SM ----1720859SM ----1720860SM 1718264SM 1720858SM 1724721SM 1724722SM 1724723SM ----1724725SM 1724726SM ----1724728SM ----1707912SM ----------------1724741SM ------------1724734SM 1724735SM 1724736SM ------------------------1707890SM -----

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

FULCRUM WASHER, 12 NUT 12 *KIT, Differential Gear *GEAR, Final *SHAFT, Final Pinion WASHER, 15 x 35 x 3.2 GEAR, Reduction PINION, Final BUSHING, 25.4 *SHAFT, Axle, Left RING, Retaining, 23 *SHAFT, Axle, Right BUSHING, 25.4 SEAL, S25.4 x 42 x 8 WASHER, Thrust LEVER, Brake SPRING, Brake Return DISK, Brake *SHOE, Brake KIT, Shim BRAKE ACTUATOR *SHAFT, Brake WASHER, 16 x 23 x 1.6 *SEALANT RING, Snap *FLANGE PLUG 20 *CAP KIT *O-RING, 1A 24040 *COLLAR 25.4 SLIDER, Differential Lock *FORK, Differential Lock *LEVER, Differential Lock *LEVER PIVOT HOOK, Spring PLATE, Arm SLIDER, Differential Lock *PIN, Differential Lock *PLATE, Differential Lock *SPRING PIN, 4 x 18 *KIT, Charge Pump *PIPE *BRACKET, Tank SCREW, Tapping, 8 x 20 *FITTING

N o R tf ep o r ro du ct io

61 62 64 66 68 69 70 71 72 74 76 77 78 79 81 82 85 86 87 88 89 90 91 92 99 100 102 103 104 119 120 121 122 123 124 125 126 127 128 131 132 139 140 141 144

n

REF NO PART NO.

Footnotes

*Note: See your local authorized dealership for parts and warranty or contact Tuff Torq at www.tufftorqservices.com (U.S. 1866-572-3441 Int'l 01-423-585-1977) The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

35

1756199

Transmission SERVICE PARTS - Tuff Torq K66L (After Serial No. 2000676240) NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

N o R tf ep o r ro du ct io

n

1733941

The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

36

1756199

Transmission SERVICE PARTS - Tuff Torq K66L (After Serial No. 2000676240) REF NO PART NO.

QTY. DESCRIPTION

1724745SM ----1724742SM 1731977YP -----

1 1 1 1 1

SEAL, 8 *VENT VALVE, 15 TANK, Reservoir SEAL KIT *KIT, Repair (Used on K66C, L, S & Y)

N o R tf ep o r ro du ct io

n

145 146 148 200 201

Footnotes *Note: See your local authorized dealership for parts and warranty or contact Tuff Torq at www.tufftorqservices.com (U.S. 1866-572-3441 Int'l 01-423-585-1977) The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

37

1756199

Controls Group - Cruise Control NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

N o R tf ep o r ro du ct io

n

985883

The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

38

1756199

Controls Group - Cruise Control QTY. DESCRIPTION

1722314 1960666 1722303 1920397 1722003 1960103 1931333 1924361 1709043 1931342 1960273 1722460 1722117 1733719 2159106 1960636 1960001 1717050 1722080 1919326 1919381 1919438 1677746 1918447

1 1 1 1 1 2 1 2 1 1 1 2 1 1 1 2 2 1 1 1 1 1 1 1

COVER, w/Cruise Icon SCREW, Torque Head Plus Socket Head, 1/4-20 x 7/8 KNOB, Cruise NUT, Hex Lock ESNA Light, 1/4-20 LEVER & BRACKET ASSEMBLY, Cruise WASHER, 3/8, Black BOLT, Carriage, 5/16-18 x 3/4 WASHER, 1/2 SPACER, w/Flange, 11/32 x 15/32 x 3/4 BOLT, Carriage, 5/16-18 x 2-3/4 BOLT, Carriage, 5/16-18 x 2-1/4 PIN, Quick ROD, Cruise ROD, Return SPRING, Cruise Return to Frame NUT, Hex KEPS, 5/16-18 CAPSCREW, Hex Washer Head Plastite, 10-14 x 5/8 SWITCH, Interlock, Push, Neutral Start, Gray SPACER, 11/32 x 5/8 x 1-13/32 WASHER, 5/16, Black WASHER, 5/16, Black NUT, Hex Lock ESNA Light, 5/16-18 SPRING, Compression PIN, Cotter

N o R tf ep o r ro du ct io

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

n

REF NO PART NO.

Footnotes

The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

39

1756199

Controls Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

N o R tf ep o r ro du ct io

n

986599

The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

40

1756199

Controls Group QTY. DESCRIPTION

1721353 1721891 1930591 1919326 1721476 1931353 1663114 2821133 1725250 1722460 1724917 1960020 1704420 1721134 1924940 1960687 1721133 1723237 1722513 1726763 1931320 1918447 1721354A 1664847SM 1919438 1919381 1927557 1722535A 1721577 1931334 1921333 1722083A 1923683 1722070A 1960636 1721675 1722071A 1721674 1920397 1686612 1721995

1 1 1 2 1 2 2 1 1 3 1 1 1 1 1 2 1 2 1 1 1 1 1 3 1 1 2 1 1 4 2 1 1 1 4 1 1 1 1 1 1

ROD, Brake Lock KNOB, Push On, Red Plastic "P" CAPSCREW, Hex Flange Whiz Lock, 5/16-18 x 3/4 WASHER, 5/16, Black ROD, Brake BOLT, Carriage, 3/8-16 x 1 3/4 BUSHING, 5/8 x 3/4 x 3/4, Nylon FITTING, Lube, 1/4 SPRING, Extension PIN, Quick ARM & HUB ASSEMBLY, Idler WASHER, 5/8 RING, Clipring Extension PULLEY, w/Bearing WASHER, 3/8 NUT, Hex Flange ESNA, 3/8-16 PULLEY, Idler BUSHING, 1 x 1-1/8 x 5/8, Nylon ARM, Brake PEDAL ASSEMBLY, Foot BOLT, Carriage, 1/4-20 x 1-1/4 PIN, Cotter, Black LATCH, Brake CAPSCREW, Hex Washer Head Taptite, 5/16-18 x 3/4 NUT, Hex Lock ESNA Light, 5/16-18 WASHER, 5/16, Black NUT, Hex Flange Whiz Lock Large, 5/16-18 PEDAL, Brake PAD, Brake Pedal BOLT, Carriage, 5/16-18 x 7/8 CAPSCREW, 5/16-18 x 1 ACTUATOR, Switch 2.53" Long CAPSCREW, Hex Washer Head Taptite, 3/8-16 x 3/4 PEDAL, Forward NUT, Hex KEPS, 5/16-18 PAD, Foot Pedal Forward PEDAL, Reverse PAD, Foot Pedal Reverse NUT, Hex Lock ESNA Light, 1/4-20 CAM, Roller SPRING, Extension

N o R tf ep o r ro du ct io

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41

n

REF NO PART NO.

Footnotes

The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

41

1756199

Electrical Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

N o R tf ep o r ro du ct io

n

986605

The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

42

1756199

Electrical Group QTY. DESCRIPTION

1721810 1677371 1723451 1722669 1722887 1726556 1726557 1925003 1665238 1665237 1722611 1725074 1724865 2820263 2860750 2820426 1722739 1728963 1686734 1717163 1717550 1717549 1960547 2101025 1701011 2825094 1716951 1713535 1721830 1603618 1677296 2816622 2816964 2821319 2823341 1713163 1685215 1722009 1929000 1726810A 1732004 1704379 1732006 1717050

1 4 4 1 1 1 1 2 1 1 1 1 1 2 2 3 1 1 1 1 1 1 1 1 3 4 1 1 1 1 1 3 2 2 2 1 1 1 2 1 1 1 1 1

HEADLIGHT ASSEMBLY, 4 Bulb (Includes Ref. Nos. 2 & 3) BULB, Headlight, 12.8V SOCKET ASSEMBLY, Headlight, Sealed HARNESS, Headlight SWITCH, PTO Push/Pull Symbols SWITCH, RMO Module Only KEY, RMO Module, Plastic CAPSCREW, Hex Washer Head Taptite, 1/4-20 x 1/2, Black BREAKER, Circuit, 12 Volt 20 Amps WIRE, 12GA 5-15/16 Long, Red PLUG, Hole, Square PANEL, Instrument w/ Fuel Gage & Hour Meter (Includes Ref. No. 13) COVER, Instrument Panel NUT, Hex, 5/16-24 NUT, KEPS Lock 5/16-24 (CE/Export) (Used only on RMO/ACS Models) LOCKWASHER, External Tooth, 5/16 SOLENOID SOLENOID (CE/Export) (Used only on RMO/ACS Models) SWITCH ASSEMBLY, Ignition, 6 Pin INDAK (Includes Ref. Nos. 18, 19, 20, 21 & 22) KEYS, Set of 2 COVER, For Ignition Switch, Plastic NUT, Hex Flange, 5/8-32, Ignition Switch LOCKWASHER, Internal Tooth, 5/8, Thin WASHER, Shim TIE, Strap, 7-5/16 Long TIE, Strap, 7-5/16 Long (CE/Export) (Used only on RMO/ACS Models) SWITCH, Headlights , 2 Terminal BOOT, Insulator Cable Terminal, 1-15/16 Long, Red CABLE, #6 x 25" Long, Ring Terminals CABLE, #6 x 8" Long, Ring Terminals BOOT, Insulator Battery Terminal NUT, Hex, 1/4-20 LOCKWASHER, 1/4 WASHER, 1/4 CAPSCREW, Hex Head, 1/4-20 x 3/4 CABLE, #6 x 26 Long, Ring Terminal BATTERY, 12 Volt STRAP, Battery, 14 Long, Rubber CAPSCREW, Hex Head Taptite, 1/4-20 x 3/8 BRACKET, Switch Mount SWITCH, Reverse Pedal SWITCH, Reverse Pedal (CE/Export) (Used only on RMO/ACS Models) SWITCH, Push Button, Foot Pedal SWITCH, Cruise Control, Grey, NO (Used on all models except CE/Export)

N o R tf ep o r ro du ct io

1 2 3 4 5 6 7 8 9 10 11 12 13 14 14 15 16 16 17 18 19 20 21 22 23 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 38 39 40

n

REF NO PART NO.

Footnotes

The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

43

1756199

Electrical Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

N o R tf ep o r ro du ct io

n

986605

The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

44

1756199

Electrical Group REF NO PART NO.

QTY. DESCRIPTION

2860665 1917365 1722309 1686921 1685303 1960536 1716368 1718981 1730192 1733220 1734025

5 5 1 1 1 2 1 1 1 1 1

50

1725302

1

SCREW, Pan Head Torx, #10-32 x 1/2 LOCKWASHER, 3/16 #10 PLUG, Hole 3", Round SENDER, Fuel Tank (Includes Ref. 45) GASKET CAPSCREW, Hex Washer Head Plastite, 1/4 x 1/2 SWITCH, Seat, Grey, NC SWITCH, Seat, Grey, NC (CE/Export) (Used only on RMO/ACS Models) HARNESS, Wiring HARNESS, Wiring (CE/Export) (Used only on RMO/ACS Models) WIRING ASSEMBLY, All Conditions Shutdown (CE/Export) (Used only on RMO/ACS Models) 12-VOLT OUTLET (CE/Export) (Used only on RMO/ACS Models)

N o R tf ep o r ro du ct io

n

41 42 43 44 45 46 47 47 48 48 49

Footnotes

The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

45

1756199

Hood, Grille & Dash Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

N o R tf ep o r ro du ct io

n

2986608

The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

46

1756199

Hood, Grille & Dash Group REF NO PART NO.

QTY. DESCRIPTION

1721804C 1722110C 1960295 1960392 1687054 1933896 1723123 1930641 1721803C 1721808A 7102326 1721802C 1721810 1677371 1723451 1721809A

1 1 12 1 1 1 1 12 1 1 1 1 1 4 4 1

PANEL, RH Side, Orange HOOD, with Louvers, Orange CAPSCREW, Hex Head Flange Lock,1/4-20 x 5/8 SCREW, Phillips Head, #10-24 x 1/2 DASHBOARD, RMO, Black NUT, Hex Nylock,#10-24 ROD, Dash Support NUT, Hex Flange Lock, 1/4-20 PANEL, LH Side, Orange HINGE, LH DUCT, Air Inlet, Plastic GRILLE, Orange HEADLIGHT ASSEMBLY (Includes Ref. Nos. 15 & 16) BULB, Headlight SOCKET, Headlight HINGE, RH

N o R tf ep o r ro du ct io

n

1 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

Footnotes

The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

47

1756199

Seat & Seat Deck Group - EVAP Compliant NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

N o R tf ep o r ro du ct io

n

2989506

The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

48

1756199

Seat & Seat Deck Group - EVAP Compliant QTY. DESCRIPTION

1722129A 1731999 1722128A 2172434 1709256 1714263 1919438 1717051 1930591 1931339 1931350 1722356 1935255 1930601 1722309 1729711 2860664 1931277 5103005 1722340 1654930 1751622 1960636 1722106C 1722106D 1722108 1722105C 1722105D 1960667 1663752 1930645 1924940 1751599 1727949A 7700552x5 1752099A 1960589 1960591 1701011 1752230 799624 7104638

1 1 1 1 2 2 6 2 8 2 2 1 4 4 2 1 8 4 1 1 1 1 8 1 1 1 1 1 4 2 2 2 1 1 1 1 2 2 1 1 1 1

BRACKET, 1-5/8 x 1-3/4 SEAT, 18" SUPPORT, Seat CLIP, Wire WASHER, Spring, 5/16 x 1-1/4 SPRING, Compression NUT, Hex Lock, ESNA Light, 5/16-18 SPRING, Compression CAPSCREW, Hex Flange Whiz Lock, 5/16-18 x 3/4 BOLT, Carriage, 5/16-18 x 2 BOLT, Carriage, 3/8-16 x 1 SLIDE, Seat NUT, Speed, 5/16-18, Lug Type CAPSCREW, Hex Washer Head Taptite, 5/16-18 x 5/8 PLUG, Plastic POD, with Cup Holder, LH CAPSCREW, Hex Washer Head, 1/4-20 x 5/8 NUT, Hex Flange Whiz Lock, 5/16-18 CAP, Gas TUBE & ELBOW ASSEMBLY BUSHING, 3/8 x 9/16 x 5/8, Rubber TANK, Fuel (Incl. Ref. Nos. 39, 40 & 41) NUT, Hex KEPS, 5/16-18 DECK, Seat, Orange DECK, Seat, Red POD, RH with 2 Slots TUNNEL, Orange TUNNEL, Red CAPSCREW, Hex Flange Whiz Lock, 5/16-18 x 1 SPACER, 25/64 x 5/8 x 3/16, Hardened NUT, Hex Flange Two-Way Lock, 3/8-16 WASHER, 3/8 CARBON CANISTER, 300CC SUPPORT, Mower Hanger HOSE, Vapor BRACKET, Canister Mounting SCREW, Round Head Phillips, #10-24 x 3/4 NUT, KEPS Lock, #10-24 TIE, Self Locking DECAL, EVAP GROMMET (Included with Ref. No. 22) REMOTE VENT ASSEMBLY (Included with Ref. No. 22)

N o R tf ep o r ro du ct io

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 24 25 26 26 27 28 29 30 31 32 33 34 35 36 37 38 40 41

n

REF NO PART NO.

Footnotes

The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

49

1756199

Lift Group - Manual NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

N o R tf ep o r ro du ct io

n

986865

The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

50

1756199

Lift Group - Manual QTY. DESCRIPTION

1927557SM 1931333SM 1722291SM 1723124SM 1960674SM 1723321SM 1721581SM 1926149SM 1721712ASM 1960636SM 1722482SM 1722112SM 2156302 1723163SM 1723795ASM 1919381SM 1921160SM 1722819SM 1960033SM 1727778A 1935255SM 1675232SM 1723499SM 1722357SM

2 4 1 1 1 1 1 2 1 5 1 1 1 1 1 1 1 1 1 1 1 1 1 1

NUT, Hex Whiz Lock Flange, 5/16-18, Large, Black CARRIAGE BOLT, 5/16-18 x 3/4 GRIP, Lift Lever BUTTON, Red Nylon, for 1/4 Rod NUT, Push SPRING, Compression, Lift Lever QUADRANT, Lift, Powdered Metal CAPSCREW, Hex Head, 5/16-18 x 1, G8, Black LEVER ASSEMBLY, Lift NUT, Hex KEPS, 5/16-18 ROD, Latch LOCK, Lift, Powdered Metal SPRING, Extension SPACER, 1/2 x 3/4 x 23/32 BAR, Lift, 9-7/8 Long WASHER, 5/16, Black CAPSCREW, Hex Head, 5/16-18 x 2-1/4 PIN, Flat Head Drilled, 1/2 x 2-1/8 Long CLIP, Hair Pin, 2-9/16 Long SHAFT ASSEMBLY, Lift NUT, Speed, 5/16-18, Lug SPRING, Compression RETAINER, Spring Flat CAPSCREW, Hex Washer Head, 5/16-18 x 4-1/2

N o R tf ep o r ro du ct io

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

n

REF NO PART NO.

Footnotes

The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

51

1756199

Wheels & Tires Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

N o R tf ep o r ro du ct io

n

W986613

The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

52

1756199

Wheels & Tires Group REF NO PART NO.

QTY. DESCRIPTION

1722305 1722833 2164247 1722834 2172353 1722726 1919394 2832577 1722676 2105337 2860200 1723112 1721400 1722766 1722830 2157638 1722831 2834712 2177725

2 2 2 2 4 4 6 2 4 2 4 2 2 2 2 2 2 2 10

WHEEL & TIRE ASSEMBLY, Front, (Includes Ref. Nos. 2, 3, 4, 5 & 6) TIRE, 16 x 6-1/2 - 8 Super Turf, Front TUBE, Tire 16 x 6-1/2 - 8, Front WHEEL, w/Bearings, 5 3/8 x 7-15/16, Front VALVE STEM & CAP ASSEMBLY WASHER, Special, Hub Cap, 1 x 2-1/2 WASHER, 1" RING, Shaft CAP, Hub Grey, 2-23/64 KEY, HI PRO, 1/4 x 2 WASHER SPACER, 1-1/16 x 1-1/2 x 1-23/32, Black PLATE & HUB ASSEMBLY, Rear Wheel w/Studs WHEEL & TIRE ASSEMBLY, Rear 23" (Includes Ref. Nos. 6, 16, 17 & 18) TIRE, 23 x 10-1/2 - 12 Super Turf, Rear TUBE, Tire 23 x 10-1/2 - 12, Rear WHEEL, 7 x 12, Rear RING, Shaft NUT, Hex 7/16-20, For Wheel Bolt

N o R tf ep o r ro du ct io

n

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

Footnotes

The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

53

1756199

Decals Group - Brand & Model NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

N o R tf ep o r ro du ct io

n

B986613

The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

54

1756199

Decals Group - Brand & Model QTY. DESCRIPTION

1717692 1731418 1722551 1722820 1722549 1722779 1722780 1730206 1722781 1731926 1722773 1722774 1708926 1722795 1722796 1722797 1730209 1722817 1722818 1714363 1752715 1752714 1753986 1722802 1722803 1730207 1728113 1739495 1722801 1722815 1722816 1727783 1727784 1716518

2 1 3 1 1 1 1 1 1 1 1 1 1 2 2 2 1 1 1 1 2 2 2 2 2 2 2 2 2 1 1 1 1 1

DECAL, ICON Simplicity, Orange DECAL, ICON Simplicity, Orange DECAL, Simplicity, Silver & Blue w/Icon DECAL, Conquest, Silver & Blue DECAL, 16HP, Silver On Clear DECAL, 18HP, Silver On Clear DECAL, 20HP, Silver On Clear DECAL, 21HP, Silver On Clear DECAL, 23HP, Silver On Clear DECAL, 24HP, Silver On Clear DECAL, Hood Stripe, RH, Simplicity, Blue & Silver DECAL, Hood Stripe, LH, Simplicity, Blue & Silver DECAL, AGCO, Logo Black, Chrome, Orange DECAL, 1716, Gray, AGCO DECAL, 1718, Gray, AGCO DECAL, 1720, Gray, AGCO DECAL, 1721, AGCO DECAL, Hood Stripe, LH, AGCO DECAL, Hood Stripe, RH, AGCO DECAL, Massey Ferguson Logo, 3 Triangles DECAL, 2700, Massey Ferguson DECAL, 2700, 24-52, Massey Ferguson DECAL, 2700, 26-52 PS, Massey Ferguson DECAL, 2718, Black, Massey Ferguson DECAL, 2720, Black, Massey Ferguson DECAL, 2721, Massey Ferguson DECAL, 2723, Massey Ferguson DECAL, 2724, Massey Ferguson DECAL, 2716, Black, Massey Ferguson DECAL, Hood Stripe, LH, Massey Ferguson DECAL, Hood Stripe, RH, Massey Ferguson DECAL, Hood Stripe, LH, Massey Ferguson Baron DECAL, Hood Stripe, RH, Massey Ferguson Baron DECAL, Power Steering (Power Steering Models Only)

N o R tf ep o r ro du ct io

1 1 2 3 4 4 4 4 4 4 5 5 6 7 7 7 7 8 8 9 10 10 10 10 10 10 10 10 10 11 11 11 11 12

n

REF NO PART NO.

Footnotes

The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

55

1756199

Decals Group - Safety & Common NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

N o R tf ep o r ro du ct io

n

C986613

The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

56

1756199

Decals Group - Safety & Common QTY. DESCRIPTION

1722806 1718025 1722814 1734027 1726923 1723143 1725158 1727014 1720454v 1725072 1723296 * * * 1708927 1723160 * 1704276 1722771 * 1722789 1722790 7103181 1722791 1704277 1721197

1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

DECAL, Ignition Switch Symbols, White/Black DECAL, Automatic Control Traction DECAL, Tunnel Cover, Danger Slopes/Blades DECAL, Tunnel Cover, Danger Slopes/Blades, (Export) DECAL, Tunnel Cover DECAL, Lift Lever Symbols DECAL, Drive Belts, Mower Blades (38 Tooth Sprocket Mower) DECAL, Drive Belts, Mower Blades DECAL, Touch Up Paint, Deep Orange DECAL, Touch-Up Paint, Red DECAL, Protective Sticker LABEL, Decibel, Power Massv DECAL, I.D. Plate DECAL, Patent DECAL, USA Logo Stars & Stripe DECAL, Transmission Release Valve DECAL, I.D. Plate DECAL, Danger Do Not Put Hands/Feet in Mower DECAL, Free Floating Mower, Silver DECAL, OPEI Certified DECAL, 44", Silver on Black with Stripe DECAL, 50", Silver on Black with Stripe DECAL, 52" Deck DECAL, 54", Silver on Black with Stripe DECAL, Danger Do Not Operate without Deflector DECAL, Height of Cut

N o R tf ep o r ro du ct io

1 2 3 3 3 4 5 5 6 6 7 8 9 10 11 12 13 14 15 16 17 17 17 17 18 19

n

REF NO PART NO.

Footnotes Note* Not a service part.

The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

57

1756199

52" Mower Deck - Clutch & Support Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

N o R tf ep o r ro du ct io

n

2988067

The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

58

1756199

52" Mower Deck - Clutch & Support Group QTY. DESCRIPTION

1713578 1715759 1960519 1960687 1732443 2156302 1738040A 7091945 1921971 1924356 1714255 7091158 1735321A 1736540 7091528 7091619 1739585A 1930645 1715772 2101137 1665450 1739594 5025013X8 5044960

1 1 1 3 2 1 1 2 1 2 1 2 1 2 2 2 1 1 2 1 1 1 1 1

ROD, 1/2 Dia. x 7-5/8 ROD, 3/8 Dia. x 8 PUSHNUT, 1/2 NUT, Hex Flange, 3/8-16 SPACER, 3/4 OD x 3/4 Long SPRING, Extension, 4-1/8 HITCH, Mower BOLT, Carriage, , 3/8C X1-1/2 GR5 YZ CAPSCREW, Hex Head, 3/8-16 x 1-3/4, G5 WASHER, 3/8, 1/2 OD SPACER,1-1/2 OD USE - 91810 BOLT, Carriage, 3/8C X1-3/4, G5 ARM, Idler, Lower PULLEY, Idler, 46 & 52" Mowers WASHER, Flat, 3/8 x .875 NUT, Whiz, 3/8 ARM, Idler, Upper NUT, Hex Flange, Two Way Locking, 3/8-16 SPRING, Extension, 5-1/4 V-BELT, HA, 68.10 V-BELT, HA, 87.20 SPACER, 1-3/4 OD BOLT, 3/8-16 x 1, G5 SPACER, 3/8 x 1 x 1/4

N o R tf ep o r ro du ct io

0080 0090 0091 0092 0093 0094 0095 0100 0110 0120 0130 0200 0210 0220 0240 0320 0330 0340 0350 0370 0380 0390 0400 0410

n

REF NO PART NO.

Footnotes

The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

59

1756199

52" Mower Deck - Height Adjustment & Roller Bar Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

N o R tf ep o r ro du ct io

n

988332

The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

60

1756199

52" Mower Deck - Height Adjustment & Roller Bar Group QTY. DESCRIPTION

2860681 1727381 1960268 1739691A 7090001 1931333 1704073A 1924366 1722036 1960520 2172622 1924361 1677507 1704082 7091945 1736154 1668513 1735327A 1737409 1736152 1737219BM 720107 1930644 1664847SM 1736850A 1736156A 720139 1736851 1739554A 1960221 7091810 7014334 1739459A 7091619 1739458A 1668344 1733513 1921319 1960757 1931277 1737011A 1736563 1960074 1960103

4 1 1 1 3 1 1 2 4 2 1 1 1 1 1 1 7 1 2 1 2 1 2 10 1 4 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2

NUT, Hex, Top Lock, Spiral Flange, 3/8-16 NUT, Hex Adjusting, 1 Dia BOLT, Carriage, 3/8-16 x 1-1/4, G5 ARM, Pitch Adjustment, Front BOLT, Carriage, 5/16 x 3/4, G5 BOLT, Carriage, 5/16-18 x 3/4, G5 BAR, Roller WASHER, 5/8 x 1-1/8 ROLLER, 2-1/2 OD PUSHNUT, 5/8, Capped BOLT, Shoulder, 3/8-16 x 1-11/32, G5 WASHER, 1/2 x 1-1/4 SLIDE NUT, Hex Adjusting, .990DIA BOLT, Carriage, 3/8 x 1-1/2, G5 SHAFT-ROLLER, 47-29/32 Long ROLLER, 2-1/2 OD x 4-3/32 Long BAR, Roller BOLT, Shoulder, 2-9/16 Long SPACER, Roller UPSTOP, Rear BOLT, Shoulder, 5/16-18 x 1/4 NUT, Hex Flange, Two Way Locking, 1/2-13 SCREW, Hex Washer Head, Taptite, 5/16-18 x 3/4 BRACKET, Height of Cut STRAP, Rocker Shaft NUT, Hex Flange, 5/16-18 ROD, Height of Cut Indicator ARM, Pitch Adjustment CLIP, Hairpin 5/8 Dia. x 1-5/16 BOLT, Carriage, 3/8 x 1-3/4, G5 SPACER, 5/8 OD x 3/8 ID ARM, MOUNT, 5/8 HFLN, 3/8C YZ ARM, MOUNT, EHOC PIN, Shear, 1/4 ID. X 1-3/4 MOTOR, Electric WASHER, 1/4 x 5/8 OD NUT, Hex, 1/4-20, L.H. Thread NUT, Hex Flange, 5/16-18 SUPPORT, Rocker Shaft SHAFT, Rocker CLIP, Hair Pin 15/16 Dia. x 5/8 Long WASHER, 3/8 x 3/4 OD

N o R tf ep o r ro du ct io

0010 0020 0040 0050 0060 0070 0080 0090 0100 0110 0120 0130 0140 0150 0160 0170 0180 0190 0200 0210 0220 0230 0240 0250 0260 0270 0280 0290 0300 0310 0320 0330 0340 0350 0360 0370 0380 0390 0400 0410 0420 0430 0441 0442

n

REF NO PART NO.

Footnotes

The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

61

1756199

52" Mower Deck - Height Adjustment & Roller Bar Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

N o R tf ep o r ro du ct io

n

988332

The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

62

1756199

52" Mower Deck - Height Adjustment & Roller Bar Group REF NO PART NO.

QTY. DESCRIPTION

1931202 1739557A 1736108A 1731383 7028728 1731382 7091493 1921971 5025156 1706644 5021030

2 1 1 2 2 2 2 1 1 1 1

CAPSCREW, Hex Washer Head, Taptite, 5/16-18 x 1-1/4 ARM, Mower Lift, R.H. ARM, Mower Lift, L.H. CHAIN, Link, 2.8 Long ROD, Height Adjust, Chain, 3.68" (Long) TRUNNION, 5/8 OD x 1-11/32 Long NUT, Hex Jam, 5/16 CAPSCREW, Hex Head, 3/8-16 x 1-3/4, G5 WASHER, 3/8 SPACER, 3/8 x 3/4 x 15/16 CABLE TIE, 6

N o R tf ep o r ro du ct io

n

0450 0460 0470 0480 0490 0500 0510 0520 0530 0540 0550

Footnotes

The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

63

1756199

52" Mower Deck - Housing, Arbors & Blades Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

N o R tf ep o r ro du ct io

n

988061

The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

64

1756199

52" Mower Deck - Housing, Arbors & Blades Group QTY. DESCRIPTION

1920676 1656916 1737252A 1930600 1960373 1751883C 1735716 1664847SM 1736505 5405811 1737352 1735399 1735326 1735323 1735328 1960766 1704314 1735733 1739567 1926110 1918199 1735579 1736519BM 1735752 1931277 1736518BM 7012542 1736366 1735447 1736364 1737359BM 1737418BM 1931334 1737279BM 1736898 1735686

5 4 3 2 10 1 1 8 1 3 1 2 1 2 2 2 3 1 1 1 2 2 1 1 4 1 2 1 1 1 1 1 2 1 1 3

CAPSCREW, Hex Head, 7/16-14 x 1, G5 WASHER, Spring, 1-3/4 OD BLADE, Mower, 18-1/2 Long CAPSCREW, Hex Washer Head, Taptite, 5/16-18 x 1-1/2 CAPSCREW, Hex Washer Head, Taptite, 5/16-18 x 1 HOUSING ASSEMBLY, Orange ADAPTER, Washout CAPSCREW, Hex Washer Head, Taptite, 5/16-18 x 3/4 COVER, Belt, L.H. SPINDLE ASSEMBLY HOUSING, Spindle BEARING, Ball, 20mm SHAFT, Spindle SHIELD, Arbor, 2-1/16 OD SPACER, Bearing RING, Self Locking FITTING, Lubrication PULLEY, 5-1/2 OD SPACER, Pulley, 46" Mower CAPSCREW, Hex Head, 7/16-14 x 2-3/4, G5 LOCKWSHER, Spring, 7/16 SPACER, Lower Drive BRACKET, Belt, Cover, Rear COVER, Belt, R.H. NUT, Whix Lock, 5/16-18 BRACKET, Belt, Cover, Front PUSHNUT, 5/16 ROD, Deflector DEFLECTOR, Discharge SPRING, Deflector, 2-5/32 Long PLATE, Deflector, Close Off HINGE, Deflector BOLT, Carriage, 5/16-18 x 7/8, G5 BAFFLE WASHOUT PORT, Connector PULLEY, 4-5/8 OD

N o R tf ep o r ro du ct io

0010 0020 0030 0070 0080 0090 0100 0110 0120 0130 0130-10 0130-20 0130-30 0130-40 0130-50 0130-60 0130-70 0160 0170 0180 0190 0200 0210 0220 0230 0240 0250 0260 0270 0280 0290 0300 0310 0320 0330 0340

n

REF NO PART NO.

Footnotes

The above parts group applies to the following Mfg. Nos.: 2691092-00 - Conquest 2691093-00 - Conquest

© Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

65

1756199

n

N o R tf ep o r ro du ct io

Hardware Identification & Torque Specifications Torque Specification Chart

Torque Specification Chart

FOR STANDARD METRIC MACHINE HARDWARE (Tolerance ± 20%) 5.6

8.8

Class 5.6

10.9 Class 10.9

Class 8.8

SAE Grade 2

Class 12.9

Size Of Hardware

Nm.

in/lbs ft/lbs

Nm.

in/lbs ft/lbs

Nm.

in/lbs ft/lbs

Nm.

M3 M4 M5 M6 M7 M8 M10 M12 M14 M16 M18 M20 M22 M24 M27 M30 M33 M36 M39

.56 1.28 2.50 4.3 7.1 10.5 21 36 58 88 121 171 230 295 435 590 800 1030 1340

13.44 30.72 60.96 7.3 12.1 17.7 35 61 101 147 202 290 390 497 733 995 1349 1740 2249

1.28 19.2 2.90 43.44 5.75 5.97 9.9 10.3 16.5 16.9 25 24 50 48 83 86.2 136 132 210 200 287 275 405 390 559 530 708 375 995 1032 1350 1401 1830 1902 2360 2441 3050 3163

1.80 4.10 8.10 14 23 34 67 117 185 285 390 550 745 960 1400 1900 2580 3310 4290

22.92 52.56 7.15 12.1 19.9 29 59 103 162 250 346 486 656 840 1239 1681 2278 2935 3798

2.15 4.95 9.7 16.5 27 40 81 140 220 340 470 660 890 1140 1680 2280 3090 3980 5150

20

10

30

40

50

60

80

70

90

Body Length

Screw, M8- 1.25 x 25

Thread Diameter (mm) Threads Inside Diameter (in) per inch

1/4

1/2

1 3/4

2.1 2.3 3.1 3.5 7.6 8.6 15.0 16.3 27.2 31.3 40.8 47.6 68.0 74.8 88.4 102.0 122.4 136 217.6 244.8 190.4 210.8 299.2 326.4

Body Length (mm) Body Length (in)

in/lbs ft/lbs 30 31 43 49 8 10 17 19 30 35 50 55 75 90 110 120 150 180 260 300 400 440 580 640

SAE Grade 8

Nm.

in/lbs ft/lbs

Nm.

3.4 3.5 4.9 5.5 10.9 13.6 23.1 25.8 40.8 47.6 68.0 74.8 102.0 122.4 149.6 163.2 204.0 244.8 353.6 408.0 544.0 598.4 788.8 870.4

41 43 60 68 12 14 25 29 45 50 70 80 110 120 150 170 220 240 386 420 600 660 900 1,000

4.6 4.9 6.8 7.7 16.3 19.0 34.0 34.0 61.2 68.0 95.2 108.8 149.6 163.2 204.0 231.2 299.2 326.4 525.0 571.2 816.0 897.6 1,244.0 1,360.0

NOTES

1. These torque values are to be used for all hardware excluding: locknuts, self-tapping screws, thread forming screws, sheet metal screws and socket head setscrews. 2. Recommended seating torque values for locknuts: a. for prevailing torque locknuts - use 65% of grade 5 torques. b. for flange whizlock nuts and screws - use 135% of grade 5 torques. 3. Unless otherwise noted on assembly drawings, all torque values must meet this specification.

Screw, 1/2- 16 x 2

Nut, 1/2-16 0

Distance between threads (mm) Threads per inch

Thread Diameter (mm) Body Diameter

SAE Grade 5

Nm.

100

Body Diameter

Nut, M8

19 20 27 31 66 76 11 12 20 23 30 35 50 55 65 75 90 100 160 180 140 155 220 240

8-32 8-36 10-24 10-32 1/4-20 1/4-28 5/16-18 5/16-24 3/8-16 3/8-24 7/16-14 7/16-20 1/2-13 1/2-20 9/16-12 9/16-18 5/8-11 5/8-18 3/4-10 3/4-16 7/8-9 7/8-14 1-8 1-12

The guides and ruler furnished below are designed to help you select the appropriate hardware.

0

in/lbs ft/lbs

N o R tf ep o r ro du ct io

in/lbs Size Of Hardware ft/lbs 5.88 13.44 26.4 44.64 5.2 7.7 15 26 42 64 89 126 169 217 320 435 590 759 988

No Marks

Hardware Grade

12.9

n

Property Class

FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%)

1/4

1/2

2 3/4

1/4

1/2

3 3/4

1/4

1/2

4

Common Hardware Types

3/4

Hex Head Capscrew

Washer

Standard Hardware Sizing When a washer or nut is identified as 1/2” (M8), this is the Nominal size, meaning the inside diameter is 1/2 inch (8mm metric thread diameter); if a second number is present it represents the threads per inch (distance between threads). When bolt or capscrew is identified as 1/2 - 16 x 2” (M8 - 1.25 x 50 ), this means the Nominal size, or body diameter is 1/2 inch (8mm metric thread diameter), the second number,16, represents the threads per inch, (1.25 thread diameter). The final number is the body length of the bolt or screw, 2 inches (50mm).

Lockwasher Carriage Bolt Hex Nut

Wrench & Fastener Size Guide

1/4” Bolt or Nut Wrench—7/16”

5/16” Bolt or Nut Wrench—1/2”

3/8” Bolt or Nut Wrench—9/16”

M6 Bolt or Nut Wrench—10mm

M8 Bolt or Nut Wrench—13mm

M10 Bolt or Nut Wrench—17mm

7/16” Bolt or Nut 1/2” Bolt or Nut Wrench (Bolt)—5/8” Wrench—3/4” Wrench (Nut)—11/16” M12 Bolt or Nut Wrench—19mm

M14 Bolt or Nut Wrench—22 mm

n N o R tf ep o r ro du ct io IT IS THE POLICY OF BRIGGS & STRATTON CORP. TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE SUCH CHANGES ON PRODUCTS.

Briggs & Stratton Yard Power Products Group 3515 N. 124 Street / PO Box 702 Wauwatosa, WI 53222 USA www.simplicitymfg.com © Copyright 2012 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved

Suggest Documents