Report
Kentucky Facilities Steel
December 29, 2015
Number of Facilities: Total Full-Time Employment:
319 21,499
Introduction and Methodology The Kentucky industry reports provide a list of facilities (with 10 or more employees) normally associated with Cabinet programs. Most information is taken directly from surveys completed by each facility or from phone or personal contact with the facility. Survey information is collected on an annual basis. Facility name, address, location, product or service, employment and other information may change and often does change between annual surveys. While all attempts are made to capture ongoing changes from data provided by facilities, local economic development contacts, media announcements, and Cabinet programs, no guarantee can be made that changes will be discovered. Also included on these reports, but not counted in the total number of facilities or full-time employment, are new location projects recently announced in Kentucky. The projects are identified by (announced) next to their projected full-time employment.
Disclaimer The information provided herein by the Kentucky Cabinet for Economic Development is believed to be accurate but is not warranted and is for informational purposes only. While all attempts are made to insure the correctness and accuracy of information in this report and to make corrections and change errors brought to our attention, no representation or guarantee, express or implied, is made as to the accuracy of the information presented. Any information provided in this report is provided without assurances or warranties and should not be relied upon as fact. The Kentucky Cabinet for Economic Development assumes no liability for the accuracy of the information contained in this report.
A & C Sheet Metal
Accurite Machine & Manufacturing Inc
988 Swan St Louisville, KY 40204-1810
4421 Poplar Level Road Louisville, KY 40213
502-635-6363
502-238-4808
www.aandcsheetmetal.com
www.accuritemachine.com
Electrical boxes; plate, ornamental, sheet & structural metal fabricating and installation
Machinery and equipment; fixtures; gauges
8 (2014)
Full-time Employment: Established:
1977
16 (2015)
Full-time Employment: Established:
1992
NAICS Codes: 333514, 333519
NAICS Codes: 332312, 332322, 332323 Contact: Mr. Paul Blandford, Pres Contact: Mr. Glenn Arington, Pres
A & L Manufacturing Co Inc
Acramold Inc
4219 S Brook Street Louisville, KY 40214-1815
1670 Distribution Dr Commerce Park West Burlington, KY 41005-9507
502-366-3037
859-525-8811
Miscellaneous and structural metal fabricating including stairs and railings
www.acramold.com
12 (2014)
Full-time Employment: Established:
Reverse engineering, tool, dies and custom molds & plastic injection molded products 8 (2014)
Full-time Employment:
1964
NAICS Codes: 332312, 332323, 332999
Established:
1979
NAICS Codes: 326199, 333514
Contact: Ms. Lee Lattis, Pres
Contact: Mr. Dallas Trinkle, Pres
A & S Fabricating Co Adams Magnetic Products Co
265 US Highway 431 N Livermore, KY 42352
509 Assembly Dr Elizabethtown, KY 42701-1162
PO Box 160 Livermore, KY 42352-0160
270-763-9090
270-278-2371
www.adamsmagnetic.com
www.asfabco.com
Magnets, magnetic tools & magnet assemblies, flexible and advertising magnetic sheeting
Job shop specializing in large, heavy custom metal fabrications, complete machine shop service including large machining, industrial repairs, machinery builder, sandblast, painting, assembly 25 (2014)
Full-time Employment: Established:
13 (2014)
Full-time Employment: Established:
2005
NAICS Codes: 332999, 333515
1969
NAICS Codes: 332312, 332313, 332710, 333318 Contact: Mrs. Karen Whitaker, Pres
Contact: Mr. Tony Hull, GM Admin
Advanced Drainage Systems Inc
A N Roth Company LLC
121 Buck Creek Church Rd Calhoun, KY 42327
749 E Jefferson St Louisville, KY 40202-1030
270-733-4324 www.ADS-pipe.com
502-584-8503
Corrugated plastic pipes
www.anroth.com Architectural & ornamental sheet metal fabricating; heating & air conditioning duct work, sales and service 10 (2015)
Full-time Employment: Established:
1866
64 (2014)
Full-time Employment: Established:
1977
NAICS Codes: 326122, 326199, 332996 Contact: Mr. Aaron Buck, Plant Mgr
NAICS Codes: 332322, 332323 Contact: Mr. Karl P. Roth Jr., Pres
12/29/2015
Page 1 of 47
Advanced Green Components LLC
Alabama Wire Products Inc
4005 Corporate Dr Winchester, KY 40391-9680
1100 West Park Road Elizabethtown, KY 42701
859-737-6016
270-737-6581
www.advgreen.com
www.sswholding.net
Produces forgings and machined rings for tapered roller bearings; produce outer and inner rings for tapered wheel bearings
Drawn wire for refrigerator shelving, oven racks, and modular storage racks; supplier of coil-based wire.
100 (2014)
Full-time Employment: Established:
1997
Established:
NAICS Codes: 332111, 339991
29 (2014)
Full-time Employment: 2005
NAICS Codes: 331222
Contact: Ms. Velva Hall, HR Mgr
Contact: Mr. Todd Seger, Genl Mgr
Aggressive Tool & Die Inc
A-Line Tool & Die Inc
5 Quality Pl Buckner, KY 40010
4158 Reservoir Ave Louisville, KY 40213-2077
PO Box 335 Buckner, KY 40010-0335
502-451-5741 Tool & die, plastic injection molds & aluminum stamping dies
502-222-5555
8 (2014)
Full-time Employment: Established:
7 (2014)
Full-time Employment:
Tool & die, molds
Established:
1967
NAICS Codes: 331318, 333514
1989
Contact: Mr. Greg French, Owner
NAICS Codes: 333514 Contact: Mr. Roger Geary, Pres
Allstate Tower Inc
Aichi Forge USA Inc
232 Heilman Ave Henderson, KY 42420
596 Triport Rd Georgetown, KY 40324-9529
PO Box 25 Henderson, KY 45419-0025
502-863-7575
270-830-8512
Steel forgings and powder metal sinter forgings for application in automotive/aircraft engine and suspension components.
www.allstatetower.com
327 (2015)
Full-time Employment: Established:
1985
AST is a full service tower contracting firm. . AST's also manufactures a plethora of steel structures including, but not limited to, telecommunication towers, agricultural material handling, and custom structures. 150 (2015)
Full-time Employment:
NAICS Codes: 332111 Contact: Mr. Takehiro Isogai, Pres
Established:
2005
NAICS Codes: 332312, 551114
AK Steel Corp Ashland Works
Contact: Mr. Ben Johnston, Dir
Alro Steel Corporation
170 Armco Road Ashland, KY 41101 606-329-7422
310 Boxley Ave Louisville, KY 40209
www.aksteel.com
502-635-7481
Steel slabs
www.alro.com 934 (2014)
Full-time Employment: Established:
1921
NAICS Codes: 331221 Contact: Mr. Doug Brown, Genl Mgr
Steel service center: shearing, burning & sawing 50 (2015)
Full-time Employment: Established:
1987
NAICS Codes: 423510 Contact: Mr. William McMurphy, Genl Mgr
12/29/2015
Page 2 of 47
Alutrim
American Highway Fence
810 W Main St Lebanon, KY 40033-1804
220 Midland Trail Industrial Park Mt. Sterling, KY 40353
270-692-2142
PO Box 717 Mt. Sterling, KY 40353
www.angell-demmel.com Decorative aluminum trim for automotive/white goods iIndustries (sill/scuff plates and decorative aluminum trim i.e. door panel). 192 (2014)
Full-time Employment: Established:
859-498-3658 www.highwayfenceusa.com Fencing materials 4 (2015)
Full-time Employment:
1965
Established:
NAICS Codes: 331318, 332999 Contact: Mr. John Simpson, HR
1997
NAICS Codes: 331222 Contact: Mr. Robert Reynolds, Pres
Amcor Flexibles Shelbyville American Metal Supply Co
6850 Midland Industrial Dr Shelbyville, KY 40065-9743
1250 Old Fern Valley Rd Louisville, KY 40219
502-223-7800 www.amcor.com
502-634-4321
Flexible packaging for pharmaceutical industry
www.americanmetalsupply.com
115 (2014)
Full-time Employment: Established:
1994
NAICS Codes: 326199, 332999
Steel and metals distributor and manufacturer. Provides turnkey service of steel products as well as first tier processing and forming. 30 (2015)
Full-time Employment: Established:
Contact: Mr. Ron Jones
1993
NAICS Codes: 332312
America Sednair Compressor Systems
Contact: Ms. Lynn Rhea, Branch Mgr
3551 Park Ave. Suite C Paducah, KY 42001
Andrews Laser Works Corp
P.O. Box 7954 Paducah, KY 42002
100 Andrews Way Wilder, KY 41071
270-443-3111
859-292-8881
www.americasednair.com
www.andrewslaserworks.com
Air compressor parts 3 (2014)
Full-time Employment: Established:
2005
Provider of laser processing, metal stamping, welding, fabrication, and machining services; and manufacturer of jet engine components. 99 (2014)
Full-time Employment:
NAICS Codes: 332999
Established:
Contact: Mr. Hunter Guan, Pres
American Building Components
1946
NAICS Codes: 332119, 333514, 336412 Contact: Mr. Dave Schneider, Pres
6975 Danville Rd Nicholasville, KY 40356-9594 PO Box 310 Nicholasville, KY 40340-0310 859-887-4406 www.abcmetalroofing.com/abcroofing Metal building products 26 (2015)
Full-time Employment: Established:
1991
NAICS Codes: 331221, 423510 Contact: Mr. Jack Bell, Plant Mgr
12/29/2015
Page 3 of 47
Aquatic Access Inc
Ashland Fabricating & Welding
1921 Production Dr Louisville, KY 40299
3321 Greenup Ave Ashland, KY 41101-2099
502-425-5817
606-324-5255
www. AquaticAccess.com
Steel fabricating, arc & gas welding, grinding; drilling, cutting
Water-powered handicapped swimming pool & spa lifts meeting ADA guidelines for public pools, and other lifts for residential pools
Full-time Employment:
15 (2014)
Full-time Employment: Established:
Established:
35 (2014) 1954
NAICS Codes: 332312, 332999, 811310
1987
Contact: Mr. Gary L. Layman, Pres
NAICS Codes: 332999 Contact: Ms. Linda Nolan, Pres
Armag Corporation Sub of Haydon Holdings, LLC 300 Armag Avenue Bardstown, KY 40004-2041
B & H Tool Works Inc 1785 Lancaster Rd Richmond, KY 40475-8755 PO Box 149 Richmond, KY 40476-0149 859-624-2458
40 Lucknow Ct Bardstown, KY 40004-2113
www.bhtoolworks.com
www.armagcorp.com
A full service tooling, machining, stamping, and fabrication job shop. Capabilities include CNC, EDM, and laser machining. Progressive and hand transfer stamping capabilities
Steel fabricating: ammunition & explosive storage magazines
Full-time Employment:
502-348-3987
62 (2014)
Full-time Employment: Established:
Established:
81 (2014) 1978
NAICS Codes: 332618, 333514, 333517, 336370
1999
NAICS Codes: 332312
Contact: Mr. Sammy Hammons, Pres
Contact: Mr. Paul Haydon, Pres
B & H Tool Works Inc of Rockcastle County Artiflex Manufacturing
83 Henderson Drive Rockcastle Industrial Park S Mount Vernon, KY 40456
111 Commerce Blvd Frankfort, KY 40601 502-565-4386
PO Box 1228 Mount Vernon, KY 40456-1228
www.artiflexmfg.com
606-256-4878
Manufacturer of metal stamping dies, die repair service, producer of metal stamped parts 41 (2015)
Full-time Employment: Established:
Established:
2008
Contact: Mr. Darrin Whitehouse, Plant Mgr
Asahi Forge of America Corporation
1998
Contact: Mr. Everett Harper, Genl Mgr
Bandana Co Inc 6228 Strawberry Lane Louisville, KY 40214
5030 Corporate Way Richmond, KY 40475
502-637-8752
859-626-4100
www.yardbirds.info
www.asahiforge.co.jp/en/ Hot forge manufacturing for the automotive industry 62 (2014)
Full-time Employment: 2003
NAICS Codes: 332111, 336310 Contact: Mr. Hirofumi Mori, Vice Pres
12/29/2015
26 (2014)
NAICS Codes: 333514
NAICS Codes: 333514
Established:
Specialty machinery, metal stamping tooling, dies Full-time Employment:
Metal yard sculptures 2 (2014)
Full-time Employment: Established:
1991
NAICS Codes: 332323 Contact: Mr. Richard Kolb, Pres
Page 4 of 47
Bekaert Corporation
Blue Grass Manufacturing Inc
2000 Isaac Shelby Dr Shelbyville, KY 40065-9129
1454 Jingle Bell Lane Lexington, KY 40509-4112
502-633-6722
859-233-7445
www.bekaert.com
www.bluegrassmfg.com
Preformed steel staple wire, fine wire, flat wire, nylon-coated wire, tin-coated wire and galvanized wire
Contract manufacturer & fulfillment center. CNC machining all materials, metal fabrication; spot, MIG, TIG, welding, and electro mechanical assembly, fabricated wire, tube and pipe. We run production quantities only. No tooling
96 (2014)
Full-time Employment: Established:
1990
80 (2014)
Full-time Employment:
NAICS Codes: 331222
Established:
Contact: Mr. Kendall Hall, Plant Mgr
Berea Tool & Cutter Grinding
1961
NAICS Codes: 332618, 332710, 332999, 493110, 561910 Contact: Mr. Don R. Bundy, Pres
93 Mason Lake Rd Berea, KY 40403-2177
Bottoms Engineering & Service Inc
859-986-2214
955 Chenault Rd Frankfort, KY 40601
www.bereatool.com Tool and die, cutter grinding, fixtures, prototype, fabricating, machining and repair work. 5 (2014)
Full-time Employment: Established:
1984
502-695-2200 www.bottomsengineering.com Structural steel fabricating for the KY highway bridge industry. Handrails, fence, finger dams, steel, and contractor supplies 13 (2014)
Full-time Employment:
NAICS Codes: 333318, 333514 Contact: Ms. Ponjetta Hobbs, Owner
Bilstein Cold Rolled Steel LP
Established:
1967
NAICS Codes: 332312 Contact: Mr. Thomas Thompson, Pres
3250 Spring Hollow Avenue Bowling Green, KY 42104
Branch Tool Inc
270-908-4906
680 Chappells Dairy Road Somerset, KY 42503
www.bilstein-north-america.com
606-679-9335
Cold rolled steel production mill
Announced:
[email protected]
50-90 (announced)
Full-time Employment:
2013
Machine shop: milling & CNC machining; tool & die 20 (2014)
Full-time Employment:
NAICS Codes: 331110
Established:
Contact: Mr. Mark J Loik, Pres/CEO
Blandford Machine & Tool Co
1998
NAICS Codes: 332710, 333514 Contact: Mr. Jesse Reynolds, Pres
5604 Fern Valley Rd Louisville, KY 40228-1056 502-964-3375 Machine shop: tools, dies, jigs, fixtures, prototypes & special machinery; drilling & boring; progressive dies 12 (2014)
Full-time Employment: Established:
1979
NAICS Codes: 333249, 333318, 333514 Contact: Mr. Todd Bello, Pres
12/29/2015
Page 5 of 47
Brewer Machine and Parts LLC
Caldwell Tanks Inc
Highway 70 W Central City, KY 42330
4000 Tower Rd Louisville, KY 40219-1901
PO Box 512 Central City, KY 42330-0512
PO Box 35770 Louisville, KY 40232-5770
270-754-1768
502-964-3361
www.brewermach.com
www.caldwelltanks.com
Steel fabricating, gang rip saws and woodworking machinery, custom machinery for wood industry. 40 (2014)
Full-time Employment: Established:
1969
Manufacture steel water tanks & towers 400 (2015)
Full-time Employment: Established:
1985
NAICS Codes: 332312, 332420, 423830
NAICS Codes: 332216, 332312, 333243 Contact: Mr. Bernard Fineman, Pres Contact: Mr. Alvin Bates
C & S Machine & Manufacturing Corp
Campbells Machine Shop Inc 387 Garfield Cemetery Lane Garfield, KY 40140-9801
3832 Fitzgerald Rd Louisville, KY 40216-5292 502-778-4479
6307 E Highway 60 Garfield, KY 40140-9801
www.csmachinemfg.com
270-756-0995
Machine shop: CNC machining, arc & gas welding, drilling, boring, cutting, lathe & mill work, production machining. Tier 1 supplier. ISO 9001
www.campbellsmachineshop.com
35 (2014)
Full-time Employment: Established:
CNC mill & lathe work & screw machine products, pharmaceutical products, automotive products, lawn care products, wire EDM, CNC plasma 5 (2014)
Full-time Employment:
1969
NAICS Codes: 332710, 332721, 332999 Contact: Mr. Robert Steele, Pres
Established:
1987
NAICS Codes: 332721, 332999 Contact: Mr. Tim Campbell, Pres
C G S Machine & Tool Inc
Campbellsville Industries Inc
2750 Griffin Drive BG Campus Bowling Green, KY 42101
440 Taylor Blvd Campbellsville, KY 42718-1200 PO Box 278 Campbellsville, KY 42719-0278
270-783-3589 www.cgsmachine.com Specialty machinery, tool & die, spare parts, production runs 56 (2015)
Full-time Employment: Established:
1994
NAICS Codes: 332710, 333249, 333514 Contact: Mr. Stephen Allen, Pres
270-465-8135 www.cvilleindustries.com Ornamental metal & aluminum fabricating; steeples, cupolas, crosses, cornices, awnings, columns, louvers, shutters, railings & balusters 78 (2014)
Full-time Employment: Established:
1955
NAICS Codes: 332323 Contact: Mr. Rick Moon
12/29/2015
Page 6 of 47
Carbide Products Inc
CC Metals & Alloys LLC
800 Clayton Ave Georgetown, KY 40324-1571
1542 North Main St Calvert City, KY 42029-9251
PO Box 550 Georgetown, KY 40324-0550
PO Box 217 Calvert City, KY 42029-0217
502-863-2340
270-395-7631
www.carbidepros.com
www.ccmetals.com
Special tools, dies, machine parts any material; multi-discipline hiprecision machine, turn, grind, lap, EDM; solid & brazed carbide cutting tools; carbide, steel & composite 34 (2014)
Full-time Employment: Established:
200 (2015)
Established:
1949
NAICS Codes: 331110, 541614
1942
NAICS Codes: 325180, 332216, 332710, 333514, 333515, 33351 Contact: Mr. Carl D Strippelhoff, Pres
Cardinal Manufacturing Co 225 Eiler Ave Louisville, KY 40214-2924
Contact: Mr. Motti Korf, CEO
CCI Industrial Services 799 Kit Cowan Rd Somerset, KY 42501 P.O. Box 433 Somerset, KY 42502
PO Box 14127 Louisville, KY 40214-0127
606-677-0241 www.cciindustrial.us
502-363-2661 www.cardinalmfg.com Steel, bronze, brass & aluminum roll formed metal products & parts 52 (2015)
Full-time Employment: Established:
Ferro alloys (metal) production & warehouse distribution Full-time Employment:
1958
Metal fabrication, machinery installation & maintenance, certified heat treated wood crate packaging, air & water piping, CNC machining, heavy haul transportation
Established:
NAICS Codes: 331221, 331420, 332322 Contact: Mr. Eric Weisbach, Prdtn/Ops Exec
70 (2015)
Full-time Employment: 2004
NAICS Codes: 332312, 423830 Contact: Mr. Rick Cable, Owner
Cardinal Shower Enclosures
Central Machinery Movers and Fabricators Inc
4795 Shepherdsville Road Louisville, KY 40218
137 Ballard Rd Lancaster, KY 40444-9043
502-969-4059
PO Box 41 Lancaster, KY 40444-0041
www.cardinalshower.com Full service manufacturer of shower door enclosures. Commercial products. 330 (2015)
Full-time Employment: Established:
N/A
NAICS Codes: 332999 Contact: Ms. Colleen Wilson, HR Mgr
12/29/2015
859-548-2506 Steel fabricating 13 (2015)
Full-time Employment: Established:
1994
NAICS Codes: 332312 Contact: Mr. Jim Lane, Pres
Page 7 of 47
Centria
Clark Machine Tool & Die Inc
1099 US Highway 421 S Frankfort, KY 40601-8821
1314 Shun Pike Nicholasville, KY 40356-9401
502-695-5578
859-885-9488
www.centria.com
Customer specific production machinery, special fixtures, special tooling, including electronics and computer programming on the machinery
Steel building components: electrified floor decks, roll formed products, gutters, louvers, vents, siding & wall panels 90 (2015)
Full-time Employment: Established:
Established:
1987
NAICS Codes: 332322, 332999 Contact: Mr. William Jones, VP
19 (2015)
Full-time Employment: 1967
NAICS Codes: 333318, 333514, 811219 Contact: Mr. Ray Clark, Pres
Cepeda Associates Inc
Clayton & Lambert Manufacturing Co
11100 Decimal Dr Louisville, KY 40299-2440
3813 W Highway 146 Buckner, KY 40010
502-267-4945
PO Box 9 Buckner, KY 40010-0009
http://www.cepedaassociates.com Submarine air purifying equipment, welding, machining, fabrication 52 (2014)
Full-time Employment: Established:
1977
NAICS Codes: 332710, 333413, 333514, 541330, 811310 Contact: Mrs. Star Dillard, Pres
800-626-5819 www.claytonlambert.com Grain bins, storage silos, stainless steel panels for in ground pools and spas & pool structures, outdoor poster panels, standing seam roofs, above ground containment basins 8 (2014)
Full-time Employment: Established:
1956
NAICS Codes: 332311, 332313, 332999
Challenger Lifts Inc
Contact: Mr. John W. Lambert, Pres
200 Cabel St Louisville, KY 40206-1810
Clinton Industries Inc
PO Box 3944 Louisville, KY 40201-3944 502-625-0700
203 Valley Creek Rd Elizabethtown, KY 42701-9052
www.challengerlifts.com
270-769-1354
Designs, manufactures and distributes vehicle lifts and accessories for the automotive repair sector.
Tools, dies & specialty machinery
92 (2014)
Full-time Employment: Established:
Established:
1995
16 (2015)
Full-time Employment: 1967
NAICS Codes: 333318, 333514
NAICS Codes: 332999 Contact: Mr. David Reavis, Pres
Contact: Mr. Clint Schaffrick, Pres
Chieftain Steel LLC South US 127 Liberty, KY 42539 1498 S Wallace Wilkinson Blvd Liberty, KY 42539 606-787-4613 www.chieftainsteel.com Manufacture welded rolled steel tube 25 (2015)
Full-time Employment: Established:
2008
NAICS Codes: 331210 Contact: Mr. Bryan Floyd, Owner
12/29/2015
Page 8 of 47
Collins Engineering Inc
Conco Inc
1584 US Highway 41A N Dixon, KY 42409
4000 Oaklawn Dr Louisville, KY 40219-2796
PO Box 400 Dixon, KY 42409
PO Box 19076 Louisville, KY 40259-0076
270-639-7956
502-969-1333
www.pioneerplastics.com
www.concocontainers.com
Machine shop: general & CNC machining, boring & cutting & lathe & mill work. Build molds for the plastic injection molding industry. 4 (2015)
Full-time Employment: Established:
1985
Metal fabricated ammunition containers & boxes 126 (2015)
Full-time Employment: Established:
1967
NAICS Codes: 332431, 332439
NAICS Codes: 332710, 333511, 811310 Contact: Mr. Gil Everson, Pres/CEO Contact: Mr. Edward Knapp, Pres
Combs Custom Manufacturing
Contech Engineered Solutions LLC 5726 Roberts Dr Ashland, KY 41102-8361
1300 Lakeside Dr Jackson, KY 41339-9678
606-928-6404 606-666-2418
www.conteches.com
Truck bumpers & accessories, push bars, grilles & grille guards; equipment parts - loaders, dozers, handrails, custom off road and ATV parts
Corrugated steel culvert pipe
1 (2015)
Full-time Employment: Established:
10 (2014)
Full-time Employment: Established:
1966
NAICS Codes: 332439, 332996
1979
NAICS Codes: 331221, 332312, 336390
Contact: Mr. J.D. Griffith, Plant Supt
Contact: Mr. Darrell Miller, Owner
CONTECH Engineered Solutions LLC Commonwealth Tool & Machine Inc 3511 Main St Stamping Ground, KY 40379-9631 PO Box 120 Stamping Ground, KY 40379-0120 502-535-4430 www.commonwealthtool.com Design, build and integrate robotic welding equipment, resistance welders, spot welders, end effectors, tool & die, special machines & gauges, EDM work, materials handling equip & machine shop 29 (2014)
Full-time Employment: Established:
1984
NAICS Codes: 332313, 332710, 333514 Contact: Mrs. Linda Whitlock, Pres
700 Tech Dr Winchester, KY 40391-9662 859-744-3339 www.conteches.com Steel retaining sheets & multiplate bridge planks. Galvanized structural steel & aluminum drainage & bridge products & retaining walls 48 (2014)
Full-time Employment: Established:
1985
NAICS Codes: 331221 Contact: Mr. Joe Kuhn, Plant Mgr
Contract Machining & Manufacturing 2425 Over Dr Lexington, KY 40511-2613 859-253-9700 www.contract-machining.com General, CNC, prototype & custom machining; tooling 54 (2014)
Full-time Employment: Established:
1981
NAICS Codes: 332420, 332710, 332721, 332996, 336350 Contact: Mr. Fred Lawson, Pres
12/29/2015
Page 9 of 47
Corrosion Resistant Reinforcing 935 Wendstrup Drive Walton, KY 41094
665 Metts Dr Lebanon, KY 40033-1909
10320 S. Medallion Drive Cincinnati, OH 45241
270-692-2109
513-719-0114
www.curtismaruyasu.com
www.cmcmmi.com Fabricate stainless rebar 21 (2015)
Full-time Employment: Established:
Curtis-Maruyasu America Inc Plt 1, 2, & 3
Motor vehicle fuel systems & parts; fabricates pipes & fittings fuel or oil caps, hybrid fuel storage systems, fuel injection systems, fuel tanks, breather elements, nonferrous alloy tubing 470 (2014)
Full-time Employment:
2015
Established:
NAICS Codes: 332312 Contact: Mr. Robert faircloth, Owner
1988
NAICS Codes: 332996, 336390 Contact: Mr. Doug Vyverberg, Pres
Craig Machinery & Design Inc D C Morrison Co
629 W Magnolia Ave Louisville, KY 40208-2239
201 Johnson St Covington, KY 41011-1437
502-635-7950 www.craigmachinery.com
P O Box 586 Covington, KY 41011
Automation machinery & tooling, plastic assembly equipment. Also clam shell, blister welding and closure machinery. Low volume contract plastic welding
859-581-7511
20 (2015)
Full-time Employment: Established:
www.dcmorrison.com Machine shop: keyseaters, Schaver speed lathe, feedscrews 20 (2015)
Full-time Employment:
1977
NAICS Codes: 333514, 333999 Contact: Mr. Ken Rabeneck, Pres
Established:
1950
NAICS Codes: 332710, 332999, 333517 Contact: Mr. Roger Reder, Treas
Cumberland Mine Service Inc D G Industries Inc
12326 N US Hwy 119 Totz, KY 40870
1270 S Preston Hwy Shepherdsville, KY 40165
PO Box 394 Cumberland, KY 40823-0394 606-573-7650
PO Box 753 Mt. Washington, KY 40047-0753
www.cumberlandmineservice.com
502-955-1670
Metal fabricating; custom ceramic & abrasion resistant coating service; ceramic liners, construction and maintenance 39 (2015)
Full-time Employment: Established:
1980
NAICS Codes: 332812, 332999 Contact: Ms. Nancy Garland
Custom metal, steel & plastic fabricating 8 (2014)
Full-time Employment: Established:
1989
NAICS Codes: 326199, 332312, 332322 Contact: Mr. Donald Gravatte, Pres
Dafco Aerospace 4830 Crittenden Dr Louisville, KY 40209 502-361-8826 www.dameron.net Investment casting foundry 20 (2014)
Full-time Employment: Established:
2011
NAICS Codes: 331512, 331513 Contact: Mr. John Dameron, CEO
12/29/2015
Page 10 of 47
Dafco Inc Div Dameron Alloy Foundries 6851 Cane Run Rd Louisville, KY 40258-2845
Deltech Manufacturing Inc 3910 Oaklawn Dr Louisville, KY 40219-2719 502-962-3500
502-933-9311
www.deltechmfg.com
www.dameron.net
Manufacture and distribute our own line of fitnness equipment, conveyor bearings and utility pole components along with contract machining, metal stamping and metal fabrication
Investment castings foundary 59 (2015)
Full-time Employment: Established:
1994
Established:
NAICS Codes: 331512, 331513 Contact: Mr. John Dameron, CEO
Dahl & Groezinger Inc
1984
NAICS Codes: 326199, 332119, 332710, 332721, 333514, 33992 Contact: Mr. Glenn Hillis, CEO
Denios Inc
940 W 9th St Owensboro, KY 42301-2001
1152 Industrial Blvd Louisville, KY 40219
PO Box 926 Owensboro, KY 42302-0926
502-933-7272
270-684-1404
www.denios-us.com
Scrap iron, ferrous & nonferrous metal processing, export scrap. 20 (2014)
Full-time Employment: Established:
32 (2014)
Full-time Employment:
Spill containment and storage equipment for chemicals
Established:
1885
NAICS Codes: 331420, 331511, 423930 Contact: Mr. Drew Kirkland, Pres
70 (2015)
Full-time Employment: 1990
NAICS Codes: 332312 Contact: Mr. Brian Pahl, Pres
Derby Welding & Machine Co Inc
Dant Clayton Corp
4624 Pinewood Rd Louisville, KY 40218-2930
1500 Bernheim Ln Louisville, KY 40210-2210
502-966-0232
502-634-3626 www.dantclayton.com
Steel fabricating & welding
Grandstands/bleachers, spectator seating, custom structural steel products and press boxes
Full-time Employment:
110 (2015)
Full-time Employment: Established:
Established:
18 (2014) 1967
NAICS Codes: 332312, 811310
1979
NAICS Codes: 332312, 337127 Contact: Mr. Keith Williams, Pres/CEO
Contact: Mr. Gary Young, Owner
Desma USA Inc
Davert USA Inc
2195 Arbor Tech Dr Hebron, KY 41048
100 N Graham Avenue Bowling Green, KY 42102
859-525-6610
270-796-5076
Rubber injection molding machinery sales and service. Production of rubber machine injection molds.
www.desma-usa.com
Steel carrier 19 (2013)
Full-time Employment: Established:
2013
NAICS Codes: 332999 Contact: Mr. Bob Collier, Pres
12/29/2015
36 (2015)
Full-time Employment: Established:
1999
NAICS Codes: 333249, 333511 Contact: Mr. L. Scott Early, Pres
Page 11 of 47
Dotweld
DSI Underground Systems Inc UNA Tunneling Division
1300 Lakeside Drive Jackson, KY 41339
1032 E Chestnut St Louisville, KY 40204-1019
PO Box 703 Jackson, KY 41339
1774 Mellwood Ave Louisville, KY 40206-1756
606-666-9200 Metal manufacturing and fabrication 3 (2014)
Full-time Employment: Established:
502-583-1001 www.dsiunderground.com Structural steel fabricating & underground shaft and tunnel liners as well as rock bolts; all used in mining and tunneling applications.
2002
NAICS Codes: 332312, 811310 Contact: Ms. Dottie Combs, Owner
44 (2015)
Full-time Employment: Established:
1985
NAICS Codes: 332312, 332313
Drilco Industrial Inc Div Thompson International Inc
Contact: Mr. Tom Clemens, Pres
5840 Airline Rd Henderson, KY 42420-9561
Dynamic Fabrication Inc
PO Box 656 Henderson, KY 42419-0656
3523 US Hwy 62E Beaver Dam, KY 42320
270-826-3751
270-274-5810
www.thompsoninternational.com
Full service steel fabrication
Drill pipe fabricating, stabilizers, shock subs
Full-time Employment:
15 (2014)
Full-time Employment: Established:
1952
Established:
34 (2014) 2006
NAICS Codes: 332312
NAICS Codes: 332996, 333515
Contact: Mr. Brian Law, Owner/Pres
Contact: Mr. Clifford Thompson, Pres
Eastlex Machine Corp Drill Steel Service Inc
2170 Christian Rd Lexington, KY 40509-4300
4898 Highway 15 Whitesburg, KY 41858-8582
859-254-1388
606-633-4492
www.eastlex.com
Steel rods, overcast, mandoors and other metal products. Distributes cutting bits & roof bolt products
Attaching & belt loop cutting machines & press-type machines.
21 (2014)
Full-time Employment: Established:
1983
16 (2014)
Full-time Employment: Established:
1956
NAICS Codes: 332999, 333517
NAICS Codes: 331110 Contact: Mr. Andrew Schmidt, Pres Contact: Mr. Larry Cornett, Pres
Eckert Welding & Erectors Inc 1015 Town Drive Wilder, KY 41076 859-572-9444 www,eckertwelding.com Arc, gas, MIG, TIG & heliarc welding; steel fabricating & erecting; steel erection & welding services 20 (2015)
Full-time Employment: Established:
1946
NAICS Codes: 238120 Contact: Ms. Teresa Eckert, CEO
12/29/2015
Page 12 of 47
EDAC Composites LLC
EZ-Access Homecare Products Inc
1400 Jamike Avenue Erlanger, KY 41018 859-283-7155
3215 SR 2835 Morganfield, KY 42437
www.edactechnologies.com
270-389-1702
Manufacture composite engine and aerostructure components to support the aerospace industry.
Manufacture portable wheelchair ramps and modular wheelchair ramps for home/commercial use. Also manufacture Vertical Porch Lifts for home/commercial use.
187 (2014)
Full-time Employment: Established:
26 (2014)
Full-time Employment:
1986
NAICS Codes: 325211, 326199, 332999, 336413, 541712 Contact: Mr. Mike Braun, Plant Mgr
Established:
2009
NAICS Codes: 332999, 333924, 339113 Contact: Mr. Don Everard, CEO
Elizabeth Carbide Kentucky dba Scheu & Kniss
Fab Steel Inc
1500 W Ormsby Ave Louisville, KY 40210-2499
476 Transport Ct Lexington, KY 40511-1015
PO Box 2947 Louisville, KY 40201-2947
859-253-0630
502-635-6303
Structural and miscellaneous steel fabricating
www.fabsteelinc.com
www.eliz.com 47 (2015)
Full-time Employment: Established:
20 (2014)
Full-time Employment:
Parts and service for rotary tablet presses
Established:
1992
NAICS Codes: 332312
1915
NAICS Codes: 332710, 332721, 333514, 333999, 336413 Contact: Mr. David Risinger, Genl Mgr
Contact: Mr. Duane Redmon, Secy/Treas
FABCO Inc
EST Tool & Machine Inc
1339 Campbellsville Rd. Columbia, KY 42728-1236
55 Dug Hill Rd Brodhead, KY 40409
PO Box 486 Columbia, KY 42728-0486
PO Box 357 Brodhead, KY 40409-0357
270-384-4657 Machine shop: arc & gas welding; drilling, boring, cutting, honing; structural steel fabricating, steel truckbed flats, custom benches, plasma cut designs, stairs, handrail, guardrail
606-758-4626 www.esttool.com Custom tooling and machining for the automotive, aerospace, forging and railroad industries. 3 axis CNC machining, CNC lathe work, wire EDM services, welded fabrication 30 (2015)
Full-time Employment: Established:
1995
12 (2014)
Full-time Employment: Established:
1980
NAICS Codes: 332312, 333318, 811310 Contact: Mr. Anthony Janes, Owner
NAICS Codes: 333514 Contact: Mr. A. Eugene Taylor, CEO
12/29/2015
Page 13 of 47
Fabricated Metals Div Fabricated Metals LLC
Federal-Mogul Products Inc Vehicle Safety & Protection Division
6300 Kenjoy Dr Louisville, KY 40214-2927
20 Aberdeen Dr Glasgow, KY 42141-8238
PO Box 9535 Louisville, KY 40209-0535
270-651-3609 www.federalmogul.com
502-363-2625 www.fabricatedmetals.com
Heavy duty truck brake friction blocks for the commercial vehicle industry.
Railroad and mass transit accessories: houses/bunglows/cases/ cantilevers/bridges
Full-time Employment:
125 (2014)
Full-time Employment: Established:
Established:
175 (2014) 1996
NAICS Codes: 332999, 336211
1955
Contact: Mr. Rick Zimmerman, Plant Mgr
NAICS Codes: 332999 Contact: Ms. Tina Fowler, Pres
Felker Brothers Corp
Farmer's Gate Co
125 Beaver Trl Glasgow, KY 42141-1273
8610 Liberty Rd Campbellsville, KY 42718-8278
270-678-4143 www.felkerbrothers.com
270-465-7056
Stainless steel pipe, stainless steel pipe and tube 2" thru 24" in diameter.
www.farmersgate.com Steel gates, corral panels, round bale feeders, walk-throughs 20 (2013)
Full-time Employment: Established:
1997
75 (2014)
Full-time Employment: Established:
1993
NAICS Codes: 331221
NAICS Codes: 332312, 332323, 333111
Contact: Mr. Gary Hartell, Plant Mgr
Contact: Mr. Mark Farmer, Pres
Fast Fabricators LLC
Ferrous85" Company Ferragon Corporation
164 Hamilton Ct Louisville, KY 40229-4023
100 Steel Plant Road Wilder, KY 41076
502-955-8525
PO Box 429 Newport, KY 41071
www.fastfab.com
859-261-6161
Ductile iron pipe fabricating 15 (2014)
Full-time Employment: Established:
1991
NAICS Codes: 332996
www.ferrous85.com Steel toll processors of flat rolled steel
Established: Contact: Mr. Greg Creehan, Opers Mgr
20 (2014)
Full-time Employment: 2011
NAICS Codes: 331110 Contact: Mr. Eduardo Gonzalez, Pres
12/29/2015
Page 14 of 47
FET Engineering Inc
Freedom Metals Inc
903 Nutter Dr Bardstown, KY 40004-2606
1225 S 15th St Louisville, KY 40210-1860
502-348-2130
1401 W Ormsby Ave Louisville, KY 40210
www.fetusa.com Nickel molds, vacuum form tooling and trials,fixtures, jigs, foam tooling, guages, laser welding, CAD design/development for the automotive, aerospace, medical and home building industries 43 (2014)
Full-time Employment: Established:
502-637-7657 www.freedommetals.com Ferrous, nonferrous, industrial & precious scrap processing & recycling base metals, headquarters 82 (2014)
Full-time Employment:
1987
NAICS Codes: 332313, 333511, 333514, 541512 Contact: Ms. Ann Hardin, Vice Pres
Established:
1983
NAICS Codes: 423510, 423930, 551114 Contact: Mr. Bruce Blue, Chairman/CEO
Fikeco Inc Freedom Metals Inc
149 Tech Way Cynthiana, KY 41031-9217
194 Crucible Road Elizabethtown, KY 42701
PO Box 576 Cynthiana, KY 41031-0576 859-234-2878
PO Box 1024 Elizabethtown, KY 42702-1024
Sheet metal fabrication, HVAC, welding
270-982-0888
21 (2015)
Full-time Employment: Established:
www.freedommetals.com Ferrous, nonferrous, industrial & precious scrap processing & recycling base metals
1985
NAICS Codes: 332312, 332322 Contact: Mr. James R. Donaldson, Pres
25 (2015)
Full-time Employment: Established:
2005
NAICS Codes: 423510, 423930
Floyd Industries LLC
Contact: Mr. Bruce Blue, Chairman/CEO
2248 KY 910 Liberty, KY 42539
Freedom Metals Inc
6401 S US 127 Liberty, KY 42539
425 Gawthrop Dr Winchester, KY 40391
606-787-6343 www.floydgate.com
859-744-7555
Livestock handling equipment made from tubular steel
Ferrous, nonferrous, industrial and precious scrap processing and recycling base metals
32 (2014)
Full-time Employment: Established:
2006
NAICS Codes: 331210
25 (2015)
Full-time Employment: Established:
2008
NAICS Codes: 423510, 423930, 562920
Contact: Mr. Bryan Floyd, Member Contact: Mr. Bruce Blue, Pres/Owner
Fuel Total Systems Kentucky Corporation 535 Corporate Drive Lebanon, KY 40033 270-692-1117 Manufacture and supply automotive plastic fuel tank systems and fuel filler pipe systems 89 (2014)
Full-time Employment: Established:
2010
NAICS Codes: 326199, 332996 Contact: Mr. Tatsutoshi Takashima, Pres
12/29/2015
Page 15 of 47
GCH International Inc
Gerdau Calvert City Mill
330 Boxley Avenue Louisville, KY 40209
1035 Shar-Cal Rd Calvert City, KY 42029
PO Box 17347 Louisville, KY 40217-0347
270-395-3100 www.gerdau.com/longsteel
502-636-1374
Structural steel mill: angles, channels, flats and misc. channel
www.gchintl.com Bulk materials handling equipment, conveyors & storage bins. Polishing & CNC punching; industrial sheet metal & stainless steel fabricating, custom sheet metal fabrication; HVAC Duct, process equipment. 80 (2015)
Full-time Employment: Established:
140 (2015)
Full-time Employment: Established:
1983
NAICS Codes: 331110, 332312, 332510 Contact: Mr. Jim Christina, VP/Genl Mgr
1941
NAICS Codes: 332312, 332322, 333921, 333922, 551114 Contact: Mr. John Thornton, Pres/CEO
General Products Corporation
Gibbs Die Casting Corp KOCH Enterprises Inc 369 Community Dr Henderson, KY 42420-4397 270-827-1801
188 Earl Davis Dr Russellville, KY 42276
www.gibbsdc.com Aluminum die castings & Gibbs headquarters
270-726-6126 Machining and assembly of cast iron and aluminum castings to manufacture products for the automotive and heavy-duty truck industries 76 (2014)
Full-time Employment: Established:
861 (2015)
Full-time Employment:
www.general-products.com
2004
Established:
1966
NAICS Codes: 331523, 332999, 551114 Contact: Mr. Steve Church, Pres
Great Northern Building Products LLC
NAICS Codes: 332710, 332999, 336390 Contact: Mr. Stan Edger, Plant Mgr
901 South 15th Street Louisville, KY 40210 502-266-6662
Gerdau
www.gnbuilding.com
12612 Avoca Rd Louisville, KY 40223-4708
Manufacturer and distributor of specialty building materials, such as nails, brackets, vents slate roofing and flooring, industrial roofing products, shutters and drywall tools.
502-245-0256 Reinforcing steel sales, detailing and fabrication. 20 (2014)
Full-time Employment: Established:
34 (2015)
Full-time Employment:
www.gerdau.com
1965
Established:
2001
NAICS Codes: 331318, 331491, 332618, 333120, 423320, 42351 Contact: Mr. Carroll Mackin Jr, Owner
NAICS Codes: 332312
Greenlee Textron Contact: Mr. Gregory R. Fleitz, Sls Dir 4601 E Indian Trail Louisville, KY 40213 502-966-2508 http://www.greenlee.com/ Manufacturer of industrial tools and parts including hand tools and battery-operated. 64 (2015)
Full-time Employment: Established:
N/A
NAICS Codes: 332216, 333991 Contact: Mr. Fred Miller, Facility Mgr
12/29/2015
Page 16 of 47
H&S Gate, Inc.
Harris Engineering Inc
232 Fields Road Russell Springs, KY 42642
999 Broadway St Barlow, KY 42024-9616
P.O. Box 307 Russell Springs, KY 42642
270-334-3633 Bipods for guns & rifles; adapters
606-679-5090 Gate manufacturing 31 (2015)
Full-time Employment: Established:
66 (2015)
Full-time Employment: Established:
1975
NAICS Codes: 332999
2015
Contact: Mrs. Edna Harris, Pres
NAICS Codes: 332312 Contact:
Harry Gordon Steel Co Inc
Hafendorfer Machine Inc
695 N Main Street Winchester, KY 40391
550 O'Bryne Ave. Louisville, KY 40223
PO Box 330 Winchester, KY 40392
502-244-3669
859-255-2442
www.hafendorfer.com
Fabricated structural metal/steel manufacturing
Machining, sheet metal fabricating, forming, cutting 30 (2015)
Full-time Employment: Established:
1994
20 (2015)
Full-time Employment: Established:
2014
NAICS Codes: 332312
NAICS Codes: 332999
Contact: Mr. Ben Norris, Pres
Contact: James Hafendorfer, Pres
Heartland Automation LLC Hanner Machine Co
106 Supply Court Georgetown, KY 40324
130 Pond River Colliers Rd Madisonville, KY 42431-8561
502-868-7638
270-821-0947
www.ici-ky.com
www.hannermachine.com
Custom industrial automation equipment design & build including turn key integration on customer site. Robotic work cells, conveyors, material handling & assembly machinery, headquarters.
Machine shop: precision machining, fabricated steel, hard chrome plating, custom welding, hydraulic cylinders & components 12 (2014)
Full-time Employment: Established:
Established:
1976
NAICS Codes: 332312, 332813, 333318 Contact: Mr. Randy Hanner, Co-Owner
60 (2014)
Full-time Employment: 2001
NAICS Codes: 332710, 333514, 333922, 333992, 551114 Contact: Mr. Scott McElmurray, VP/Genl Mgr
Harbor Steel & Supply Corp
HEC Manufacturing Inc
2381 Innovation Drive Lexington, KY 40511-1085
222 W John Rowan Blvd Bardstown, KY 40004-9103
859-255-7884
502-331-9500
www.harborsteel.com
Custom structural steel fabricating, steel returnable containers (racks or pallets)
Steel service center: metal cutting, burning & shearing, laser cutting, press brake, saw cutting 50 (2014)
Full-time Employment: Established:
1995
NAICS Codes: 423510, 493110
33 (2014)
Full-time Employment: Established:
1997
NAICS Codes: 332312 Contact: Mr. Leo Essex, Pres
Contact: Ms. Melissa Marcum, Div Mgr
12/29/2015
Page 17 of 47
Huff Technologies Inc
Industrial Carbide Saw & Tool
325 Industrial Rd Morganfield, KY 42437
3810 Bishop Ln Louisville, KY 40218-2974
270-389-4833
502-968-8104
www.huff-tech.com
www.icstc.com
PC and PLC based systems to test production engines and subsystems. Custom testing, assembly and inspections equipment. Process machinery and systems for automotive and industrial. Pallatizers
Carbide tipped cutting tools; band saw, segmental & inserted saw blades, strapping, fittings & knives, stretch film, plastic and steel banding, sharpening services
10 (2014)
Full-time Employment: Established:
1998
24 (2015)
Full-time Employment: Established:
1970
NAICS Codes: 332216, 333243, 333515, 333517, 811310
NAICS Codes: 332999, 333318, 334513, 334519 Contact: Mr. C. J. Crush Jr., Pres Contact: Mr. Darrel Huff, Owner/Pres
Industrial Machine Services Inc
Ideal Machine & Tool Inc
83 State Route 85 W Sacramento, KY 42372-9533
7150 Distribution Dr Louisville, KY 40258-2825
270-736-2283 502-995-5751
www.industrialmachine.info
General machine shop, CNC milling & turning, press operations, dies & fixtures
Machine shop: general machining, sheet & plate steel fabricating & equipment repair; pins and bushings for mining industry.
8 (2015)
Full-time Employment: Established:
2004
Established:
NAICS Codes: 332710, 333514 Contact: Mr. Dennis Bradley, Pres
11 (2014)
Full-time Employment: 1989
NAICS Codes: 332312, 332710, 811219 Contact: Mr. Barry L. Ellis, Owner
IDT Tools Inc
Industrial Mold & Machine Co
108 Corporate Drive Frankfort, KY 40601-8311
1101 Wing Ave Owensboro, KY 42303-0867
502-848-5858
270-684-3668
Produce die components and stamping dies. 21 (2015)
Full-time Employment: Established:
2003
NAICS Codes: 333514
www.immci.com Machine shop: general, CNC & electrical discharge machining; injection & blow molds; arc, MIG & TIG welding; mill & lathe work. Waterjet cutting service. 19 (2014)
Full-time Employment:
Contact: Mr. Yoji Nakamura, Pres
Established:
1986
NAICS Codes: 333318, 333514, 811310
Imperial Tool & Manufacturing Co Inc 725 Westland Dr Lexington, KY 40504-1015
Contact: Mr. Tom Jones, Vice Pres
Indy Honeycomb
859-231-6127 www.imperialtool.com
1016 Mary Laidley Dr Covington, KY 41017
Design and builder of molds, tools, dies, fixtures, gauges as well as product development
859-359-4052
13 (2014)
Full-time Employment: Established:
1966
www.indyhoneycomb.com Welded metallic honeycomb 34 (2014)
Full-time Employment:
NAICS Codes: 326199, 333514 Established: Contact: Mr. David Meeks, Pres
1996
NAICS Codes: 332999 Contact: Mr. Don Prysi, Pres
12/29/2015
Page 18 of 47
International Identification Inc dba National Band & Tag Co
ITW Powertrain Fastening ITW Powertrain Metals
721 York St Newport, KY 41072-0430
2001 Buck Ln Lexington, KY 40511-1074
PO Box 72430 Newport, KY 41072-0430
859-255-6400 www.itwpf.com
859-261-2035
Metric screws, fastener assemblies and suspension end links
www.nationalband.com Animal identification tags, including livestock ear tags, poultry wing bands, metal & bar coded identification tags 58 (2015)
Full-time Employment: Established:
1902
84 (2015)
Full-time Employment: Established:
1956
NAICS Codes: 326199, 332722, 333514, 336310, 336330, 33639 Contact: Mr. Tim Swanson, Genl Mgr/VP
NAICS Codes: 332119, 332999 Contact: Mrs. Faye Wendel, Pres
International Mold Steel Inc Sub Okaya (U S A) Inc
J & K Tool 701 West Main Street Campbellsville, KY 42718-9505 270-465-3449 Machine shop: general machining, tool & die. Parts for various local busnisses.
6796 Power Line Dr Florence, KY 41042-3093
4 (2014)
Full-time Employment:
859-342-6000 www.imsteel.com
Established:
Specialty steel distributor and service center: Steel cutting, tool steel & mold steel. Machining, grinding, milling, and gun drilling
NAICS Codes: 332710, 333514
22 (2014)
Full-time Employment: Established:
1997
1992
Contact: Mr. John Hedgespeth, Owner/VP
J R Buck Industries
NAICS Codes: 332710, 423510 Contact: Mr. Thomas Schade, Exec VP
600 Adcolor Drive Lexington, KY 40511 859-288-7543
Iron Works Enterprises Inc
www.jrbuckindustries.com
3901 Pennebaker Avenue Bardstown, KY 40004
Custom metal fabrication services: MIG & TIG welding, CNC milling & turning, Stamping and die building, engineering & design services, and assemblies. We excel in low to medium production orders.
502-348-4001 Fabrication, industrial maintenance and repair. Structural steel erection. 8 (2015)
Full-time Employment: Established:
8 (2014)
Full-time Employment: Established:
2006
NAICS Codes: 332119, 332439, 332710, 332999, 333514, 33392
2008
NAICS Codes: 238120
Contact: Mr. James Buck, Pres
Contact: Mr. Todd Durbin, Owner
12/29/2015
Page 19 of 47
J R Hoe & Sons Inc
Jennmar of Kentucky Inc Div Jennmar Corp
N 19th St Middlesboro, KY 40965
271 Gawthrop Dr Winchester, KY 40391-8910
PO Box 1737 Middlesboro, KY 40965-3737 606-248-5560
PO Box 501 Winchester, KY 40392-0501
www.jrhoe.com
859-744-9600
Iron castings, gray and ductile; pattern tooling services; CNC machined castings; prototypes; metal fabrications-steel, stainless and aluminum; AISC structural and miscellaneous; autoCAD design and engineering.
www.jennmar.com/
59 (2015)
Full-time Employment: Established:
Contact: Mr. Harry H. Hoe, Pres
Jackson Tool & Mold LLC
1981
NAICS Codes: 332312, 336510 Contact: Ms. Melissa Cockrell, HR Mgr
Jennmar of West Kentucky Inc 860 Sandcut Rd Earlington, KY 42410
1853 Petersburg Rd Hebron, KY 41048-9506
270-383-3171
859-586-8242 Tool & mold, CNC machining, large or small machine parts run production 4 (2014)
Full-time Employment: 1982
www.jennmar.com Manufacture steel roof support systems used in underground mining and tunneling
Contact: Ms. Wanda Jackson, Owner
Jay Gee Manufacturing Div Griffin Industries Inc
69 (2015)
Full-time Employment: Established:
NAICS Codes: 326199, 333318, 333514
2006
NAICS Codes: 332312, 332722 Contact: Mr. Jeff Reeves, Sls Mgr
Jero Inc 7430 Empire Dr Florence, KY 41042
191 Bradford Road Butler, KY 41006-9675
859-342-5858
859-472-7511
www.jeroinc.com
www.darlingii.com Machine shop: drilling & boring, arc, gas, MIG & TIG welding; sheet, plate & structural metal fabricating 34 (2015)
Full-time Employment: Established:
80 (2015)
Full-time Employment: Established:
1909
NAICS Codes: 331511, 332312, 332710, 332721
Established:
Ground control products for mining and tunneling made out of flat and round stock steel.
1971
NAICS Codes: 332312, 332313, 332710 Contact: Mr. Daniel Ferguson, Genl Mgr
Stub ends, buttweld pipe fittings, 1/2' thru 60", stainless steel, high nickel alloys, aluminum, copper nickel; also custom machining, Non Destructive Testing (NDT) X-Ray, Ultrasonic. Alloy Identifacation, Rockwell hardness testing. 29 (2013)
Full-time Employment: Established:
1976
NAICS Codes: 332996 Contact: Mr. Donnie Boyers, Pres/Owner
12/29/2015
Page 20 of 47
JMS Russel Metals Corp
Ken-Tron Mfg Inc
1455 Bloom Ave Paducah, KY 42001-7058
610 Industrial Dr Owensboro, KY 42301-0187
270-575-0308
PO Box 21250 Owensboro, KY 42304-1250
www.jmsmetal.com Metal sales, processing, distributing & light manufacturing, mainly sawing & burning 42 (2014)
Full-time Employment: Established:
1999
270-684-0431 www.ken-tron.com Wire drawing & precision stampings for aerospace, electronics, battery, medical, automotive and television products. 67 (2015)
Full-time Employment:
NAICS Codes: 331221
Established:
Contact: Mr. Dan Bailey, Regl Mgr
1960
NAICS Codes: 331222, 332119 Contact: Mr. Robert Hudson, Chairman
Jones Ornamental Iron 10115 Tom Jones Drive Rush, KY 41168
Kentuckiana Curb Co/KCC International Inc
PO Box 196 Rush, KY 41168
2716 Grassland Dr Louisville, KY 40299-2526
606-928-6909
502-491-9880
www.jonesornamentaliron.com
www.kcccurbs.com
Structural steel, ornamental & structural iron fabricating; arc welding. Custom made swing or slide gates.
Metal components, roof curbs, manufacture of retrofit air condition for restaurant industry,and high efficency HVAC commercial units
2 (2014)
Full-time Employment: Established:
Established:
1946
NAICS Codes: 332312, 332323, 811310 Contact: Mr. Thomas G. Jones, Owner
217 (2015)
Full-time Employment: 1987
NAICS Codes: 332999 Contact: Mr. Albert Fiorini, Pres
Karr Industries Inc
Kentucky Advanced Forge LLC
1170 Young Cemetery Rd Corbin, KY 40701-8883
596 Triport Road Georgetown, KY 40324-9529
606-528-8757
502-863-3646
Machine shop: tool & die; machinery parts; tool and die manufacturing replacement parts for local manufacturers
Forged bearing components
8 (2015)
Full-time Employment: Established:
1981
59 (2015)
Full-time Employment: Established:
2002
NAICS Codes: 332111
NAICS Codes: 332710, 333318, 333514 Contact: Mr. Jim Spurlock, Plant Mgr Contact: Mr. Rondal Karr, Pres
Kentucky Electric Steel 2704 South Big Run Rd Ashland, KY 41102-2119 PO Box 2119 Ashland, Ky 41105-2119 606-929-1200 www.kentuckyelectricsteel.com Steel flat bars and round bars 149 (2014)
Full-time Employment: Established:
2004
NAICS Codes: 331110 Contact: Mr. John Scheel, Genl Mgr
12/29/2015
Page 21 of 47
Kentucky Machine & Tool Co 3107 Millers Ln Louisville, KY 40216-5345
1101 Mayde Rd Berea, KY 40403-9723
502-774-5733 Machine shop: general & CNC machining, repairing, tool & die, jigs & fixtures, welding, drilling, boring, cutting, honing, lathe & mill work 16 (2014)
Full-time Employment: Established:
Kentucky Steel Center Inc Sub Nippon Steel and Sumikin Bussan Corp
1925
859-986-0572 www.kentuckysteel.com Steel service center: coil slitting and steel sheets 51 (2014)
Full-time Employment:
NAICS Codes: 332710, 333514
Established:
Contact: Mr. Maurice Meisner, Ch of Bd
1996
NAICS Codes: 423510 Contact: Mr. Seiji Motoni, Pres
Kentucky Mountain Industries Kerco Inc
200 Industrial Park Rd Manchester, KY 40962
1671 Progress Drive Madisonville, KY 42431
PO Box 368 Manchester, KY 40962-0368 606-598-8641
P.O. Box Madisonville, KY 42431
www.kmi-inc.net
270-821-2889
Cold rolled, brass, CRS & stainless steel automotive stampings; plumbing fixtures & appliance parts, other types of metals stampings; tool & die. Outsourcing capabilities of: coating, plating (decorative and functional), deburring.
www.kerco.net
20 (2014)
Full-time Employment: Established:
1977
Mining equipment, parts, and service, custom fabricator 18 (2015)
Full-time Employment: Established:
1963
NAICS Codes: 332312, 332313
NAICS Codes: 332119, 332913, 333514, 336370
Contact: Mr. Chuck Reed, CEO
Contact: Mr. Jimmy Chesnut, Pres
Kevil Tool & Machine MFG Inc Kentucky Ornamental Iron 1047 Goodwin Dr Lexington, KY 40505-3809
PO Box 190 Kevil, KY 42053-0190
859-255-7791 www.kentuckyornamentaliron.com Architectural metal, brass, aluminum & ornamental iron products, entrance gates, railings & spiral staircases, fencing 5 (2015)
Full-time Employment: Established:
668 Veterans Ave Kevil, KY 42053
1961
NAICS Codes: 332323
270-462-2178 www.keviltoolandmachine.com Machine shop: general & CNC machining, drilling, boring, cutting, tool & die 10 (2014)
Full-time Employment: Established:
1969
NAICS Codes: 332710, 333514 Contact: Mr. Brad Ellis, Owner/Pres Contact: Mr. Paul R. Owen, Pres
12/29/2015
Page 22 of 47
KI (USA) Corporation Sub Keiaisha Co Ltd
Lawless Welding Inc 938 W Steve Warriner Dr Russell Springs, KY 42642-4542
501 Mayde Rd Berea, KY 40403-8730
270-866-5416
859-986-1420
www.lawlesswelding.com
www.kiusa.com
Arc, gas, MIG, TIG, heliarc & aluminum welding; structural steel fabricating; cutting & shearing; weldments; fuel oil tank distributor. Manufacture of recycling trailers.
Machined, metal stamped & cationic painted automotive parts & components, arc & resistance welding 120 (2014)
Full-time Employment: Established:
Established:
1989
NAICS Codes: 332999, 336370, 336390
1954
NAICS Codes: 332312, 332313, 811310 Contact: Mr. Gene V. Smith, Pres
Contact: Mr. Shigeru Oi, Pres
LB Manufacturing
Kintec LLC
360 Industry Dr Springfield, KY 40069-1506
5801 Haunz Ln Louisville, KY 40241-1407
PO Box 232 Springfield, KY 40069-0232
PO Box 587 Pewee Valley, KY 40056-0587
859-336-0090
502-241-9456
www.leanbmfg.com
www.kintectruss.com Wooden roof & floor trusses, light gauge steel trusses 18 (2014)
Full-time Employment: Established:
12 (2014)
Full-time Employment:
Robotic and manual MIG welding of carbon and stainless steels, resistance (spot) welding, resistance seam welding, automotive glass assembly, light and medium stamping 92 (2013)
Full-time Employment:
1976
NAICS Codes: 321214, 332312 Contact: Mr. Keith E. Kinser, Pres
Established:
1998
NAICS Codes: 333514 Contact: Mr. Dwayne Hogan, Plant Mgr
Knight's Mechanical LLC
Legacy Mold & Tool Inc
4250 Leitchfield Rd Cecilia, KY 42724-9642 270-765-4141
4525 Springfield Rd Bardstown, KY 40004-8948
www.knightsmechanical.com
502-348-8151
Process piping, sheet metal fabrication, industrial welding, steel fabrication, equipment setup, design build, and bid projects 110 (2014)
Full-time Employment: Established:
1980
NAICS Codes: 332322, 332710, 423510, 811310 Contact: Mr. John Knight, Pres
Tool & die: plastic injection molds, jigs & fixtures 2 (2015)
Full-time Employment: Established:
1997
NAICS Codes: 326199, 333511, 333514 Contact: Mr. Gary Proctor, Pres
Lesco Design & Manufacturing Co Inc 1120 Fort Pickens Rd La Grange, KY 40031-9213 502-222-7101 www.lesco-design.com Steel fabricators: conveyors, cranes and related material handling equipment and vehicle loading ramps 100 (2014)
Full-time Employment: Established:
1961
NAICS Codes: 332311, 332312, 333922 Contact: Mr. Lance Kaufman, CEO
12/29/2015
Page 23 of 47
Lily Gate Co
Louisville Metal Hose Air Hydro Power Inc
735 Loop Rd Hustonville, KY 40437-9015
2550 Blankenbaker Parkway Louisville, KY 40299-2467
606-346-4403 www.lilyfarmgate.com Metal farm gates; farm related, feeding facilites 3 (2015)
Full-time Employment: Established:
1991
PO Box 34170 Louisville, KY 40232-4170 502-361-2300 www.airhydropower.com Specialized industrial distributor and local fabrication of industrial hose, metal hose, teflon hose, expansion joints, industrial belting: specialists in application of fluid
NAICS Codes: 332323 Contact: Ms. Nell Duggins, Secy
Established:
Lincoln Tool Inc
19 (2014)
Full-time Employment: 1989
NAICS Codes: 326299, 332439, 332999, 493110 200 Commerce Pkwy Hodgenville, KY 42748-9400
Contact: Mr. Thomas McGuire, VP/Owner
270-358-9698 Precision tool & die manufacturing. Build special machines to manufacturing specs. Build molds and repair machines and parts 6 (2015)
Full-time Employment: Established:
4161 US Highway 27 S Cynthiana, KY 41031 PO Box 158 Cynthiana, KY 41031-0158
1994
NAICS Codes: 333514, 333999 Contact: Mr. Otto Woodall, Owner/Pres
859-234-6920 www.lucasequine.com Wood & metal farm gates; steel & wood horse barn window grills, doors & stall fronts
Logan Corporation 740 Honeybranch Industrial Park Debord, KY 41214
30 (2015)
Full-time Employment: Established:
1981
NAICS Codes: 321911, 332323
606-298-2000 www.logancorp.com
Contact: Mr. Mike Ravenscraft, Pres
Metals service center: steel cutting, slitting, shearing, burning, forming and braking. Mining supplies for surface and underground. Fire suppression installations and service, custom dumptruck body manufacturing 38 (2015)
Full-time Employment: Established:
Lucas Equine Equipment Inc
1938
M & M Manufacturing Inc 709 Sportsman Lake Rd Franklin, KY 42134-7659 270-586-8208
NAICS Codes: 332322, 423510 Contact: Mr. Zachary M. Taylor, Pres
Custom metal, aluminum and stainless steel fabricating for water and sewer industries
Established:
Louisville Ladder Inc
10 (2015)
Full-time Employment: 1998
NAICS Codes: 332322, 332999
7765 National Turnpike Unit 190 Louisville, KY 40214
Contact: Ms. Jennifer McBride, Pres
502-636-2811 www.louisvilleladder.com Corporate headquarters and distribution center. Louisville Ladder Inc is a wholesale distribution of ladders and related climbing products to retailers and industrial users. 75 (2015)
Full-time Employment: Established:
1946
NAICS Codes: 326199, 332999, 551114 Contact: Mr. Ricardo Clausse, Pres
12/29/2015
Page 24 of 47
M C Steel and Crane Service Inc.
Marine Systems Inc
2 Braco Int. Blvd. Wilder, KY 41076
4036 Clarks River Road Paducah, KY 42003
859-781-8600
P O Box 3430 Paducah, KY 42002-3430
www.mcsteel.com Steel service center; products: I-beams, columns, rebar, mesh, drain tile and structural steel 19 (2015)
Full-time Employment: Established:
1980
NAICS Codes: 423510, 493110
270-444-0069 www.marinesystemsinc.com Machine shop: drilling, boring, cutting, honing, lathe & mill work, general machining, steel fabricating, arc & gas welding. Repair and rebuild diesel and high speed engines. Marine repair facility & authorized parts distributor/dealer. 53 (2014)
Full-time Employment: Contact: Mr. Michael Chilelli, Owner
1984
NAICS Codes: 332312, 333318, 811310
M M I of KY
Contact: Mr. Thomas W. Bottoms, Vice Pres
2081 Mercer Rd Lexington, KY 40511-1018
Marmon/Keystone Corp
859-255-0070 www.cmcmmi.com Distributor of imbedded concrete accessories for the commercial/ industrial and highway construction industry. Full line fabricator of concrete reinforcing steel (rebar). 24 (2014)
Full-time Employment: Established:
Established:
1989
1155 Victory Place Hebron, KY 41048-8294 859-586-4000 www.marmonkeystone.com Steel service center: metal cutting 12 (2014)
Full-time Employment:
NAICS Codes: 332312, 493110
Established:
Contact: Ms. Megan Faircloth, Pres
N/A
NAICS Codes: 423510 Contact: Mr. Frankie Krouse, Opers Mgr
Madison Tool & Die Inc 145 Orchard St Richmond, KY 40475-1638
Mayes Coatings & Insulation Inc
PO Box 57 Richmond, KY 40476-0057
6082 Peters-London Road Reed, KY 42451
859-623-2680
270-826-8584
Tool and die making; welding jigs and fixtures.
www.mayescoatings.com
4 (2014)
Full-time Employment: Established:
1978
NAICS Codes: 332119, 333514
Manufacturer of insulation systems for ground storage tanks, insulation panel installer. Ridglok Panel insulation systems for storage tanks.
Established:
Contact: Mr. Gary Rose, Pres
10 (2015)
Full-time Employment: 2004
NAICS Codes: 332312
Mainstream Packaging Inc
Contact: Mr. Bob Mayes, CEO
650 Hendrickson Drive Lebanon, KY 40033 270-692-4640 www.mainstreamfabrication.com Metals service: material handling and manufacturer of steel returnable containers for auto industry 18 (2014)
Full-time Employment: Established:
2001
NAICS Codes: 332439, 423510 Contact: Mr. Fredrick Clark, Owner
12/29/2015
Page 25 of 47
McElroy Metal Inc Div McElroy Metal Mill Inc 9435 Highway 60 Lewisport, KY 42351
Metal Solutions Design & Fabrication LLC 215 Main Street Dayton, KY 41074 859-282-5000
270-295-3196
www.msdf1.com
www.mcelroymetal.com
Manufacture DOT certified metal containers for nuclear waste & other hazardous products. Reusable shipping containers, airport ground support equipment, ornamental & architectural metal work.
Metal forming, panel, trim, accessories 17 (2014)
Full-time Employment: Established:
1964
Established:
NAICS Codes: 332312, 332322
2005
NAICS Codes: 238120, 332322, 332439, 332999, 541712
Contact: Mr. Ian McElroy, Pres
Contact: Mr. David Berger, Genl Mgr
Mercer Tool & Die Inc
Metals N More Inc
100 Morgan Soaper Rd Harrodsburg, KY 40330-1056
1040 Old Barren River Road Bowling Green, KY 42101-5000
859-734-0303
270-781-3642
Tools, dies, jigs & fixtures; machine shop: general machining, drilling, boring, cutting, honing, grinding, electric welding, mill & lathe work 3 (2014)
Full-time Employment: Established:
28 (2015)
Full-time Employment:
1994
www.metalsnmore.com Metal manufacturing, fabricating, and merchant wholesales, machinery welding
Established:
NAICS Codes: 332710, 333511, 811310 Contact: Mr. Robert Collier, Pres
Merrick Construction Co Inc Sub Multi Industries
9 (2015)
Full-time Employment: 2004
NAICS Codes: 332710, 423510 Contact: Mr. Malcolm Cherry, Owner
Metalworks Recycle-Reload LLC 199 Mitch McConnel Drive Bowling Green, KY 42101
3808 Ralph Ave Louisville, KY 40211-2037
270-282-2400
PO Box 185 Louisville, KY 40201-0185 502-449-1234
Processing, packaging, shipping, receiving, and purchasing of all types of non-ferrous metals
www.merrick-kemper.com
Full-time Employment:
Sheet, ornamental & structural metal fabricating 65 (2013)
Full-time Employment: Established:
1902
Established:
11 (2014) 2010
NAICS Codes: 423510 Contact: Mr. David Bradford, Pres
NAICS Codes: 332312, 332322, 332439 Contact: Mr. William Merrick, Pres
Metcalf Metal Inc 3324 Irvine Road Richmond, KY 40475 859-369-3133 Steel fabrication, mfg. farm equipment, trailer sales & repairs 5 (2015)
Full-time Employment: Established:
1961
NAICS Codes: 332312, 333111, 811310 Contact: Mr. Mark Metcalf, Bus Mgr
12/29/2015
Page 26 of 47
Mid American Metals Company
Miles Enterprises LLC
616 Bark Cove Owensboro, KY 42303-0605
2740 Keller Road Owensboro, KY 42301-2919
270-926-3515
PO Box 22919 Owensboro, KY 42304
Metal recovery, automotive computers and mass air flow sensors; 5 (2014)
Full-time Employment: Established:
1987
270-926-2420 HQ; Service, sell, construct grain bins, tire shop 20 (2014)
Full-time Employment:
NAICS Codes: 423140, 423510
Established:
Contact: Mr. Paul Busse, Owner
Mid-America Machine Inc
1995
NAICS Codes: 236220, 423390, 551114 Contact: Mrs. Debra Seymour, Pres
92 Pioneer Industrial Dr Mayfield, KY 42066-9056
Millennium Forge Inc
PO Box 483 Mayfield, KY 42066-0483
990 W Ormsby Ave Louisville, KY 40210-1888
270-247-6909
990 W Ormsby Ave Louisville, KY 40210
www.midamericamachine.com Machine shop: cylindrical grinding, lathe & mill work, small plate & structural metal fabricating & hard chrome plating 30 (2015)
Full-time Employment: Established:
1987
www.millenniumforge.com Steel forging & fittings for valve & OEM use, custom forging-raw. Tool and Die Shop 95 (2014)
Full-time Employment:
NAICS Codes: 332312, 332313, 332710 Contact: Mr. Paul Crowell, Owner/Pres
Midwest Steel Contractors 500 Industrial Rd Murray, KY 42071-2195
Established:
2000
NAICS Codes: 332111, 332919, 333514 Contact: Mr. Dan Gonring, Plant Mgr
MISA Metal Fabricating Inc MMFI
PO Box 1308 Murray, KY 42071-1308
7101 International Drive Louisville, KY 40258-2832
270-753-0521 Steel structural fabricating; arc, gas, MIG, TIG & heliarc welding & steel erection 1 (2015)
Full-time Employment: Established:
502-635-3350
1968
NAICS Codes: 332312, 811310
502-933-5555 www.misametalfab.com Steel processing and fabrication: plate steel cutting, machining, bending, forming, welding and CNC machining.
Established: Contact: Mr. Donald Wisecup, Owner
Mike Alexander Dies Inc
160 (2014)
Full-time Employment: 1989
NAICS Codes: 332999, 423510 Contact: Mr. Mike Talis, Pres
1134 W Kentucky St Louisville, KY 40210-1345 502-515-2777 www.madies.com Steel rule cutting dies flat & rotary-male & female stripping toolsmale & female blanking tools-steel counters-flexographic platemaking; water jet cutting 22 (2014)
Full-time Employment: Established:
1984
NAICS Codes: 333514 Contact: Mr. Michael Alexander, Pres
12/29/2015
Page 27 of 47
MISA Metal Processing Inc 7300 Global Dr Louisville, KY 40258-1982
303 Steel Dr Elizabethtown, KY 42701-8135
502-937-0505 www.misteel.com Steel processing and coil slitting for material owned by our customers. 37 (2015)
Full-time Employment: Established:
Modern Welding Co of Kentucky Inc Div Modern Welding Co Inc
PO Box 117 Elizabethtown, KY 42702-0117 270-769-1368 www.modweldco.com Structural metal manufacturing
1996
Established: Contact: Mr. Gene Miller, Genl Mgr
Mitchell Hobbs & Sons Inc 3100 Vermont Ave Louisville, KY 40211-3344
1964
NAICS Codes: 332312, 332420, 811310 Contact: Mr. James Prindle, VP/Genl Mgr
Modern Welding Co of Kentucky Inc Sub Modern Welding Co Inc
502-778-7344 www.mhobbsandsons.com Custom stainless steel & sheet metal erecting & fabricating 5 (2015)
Full-time Employment: Established:
30 (2015)
Full-time Employment:
NAICS Codes: 423510
1962
155 Bean Cemetery Rd Madisonville, KY 42431-9678 PO Box 1147 Madisonville, KY 42431-8147 270-821-3575
NAICS Codes: 332322, 332999 Contact: Mr. David Hobbs, Pres
www.modweldco.com Custom structural steel & metal fabricating; arc & MIG welding 22 (2014)
Full-time Employment:
Miyama USA Inc Miyama Kogyo Co Ltd
Established:
1932
NAICS Codes: 332312, 811310
7081 International Dr Louisville, KY 40258-2865
Contact: Mr. Mike Eddings, VP/Genl Mgr
502-933-4100 www.miyamausa.com
Modern Welding Co of Owensboro Sub Modern Welding Co Inc
Automotive and appliance sub-assemblies, 6 axis precise robotic welding, stamping, precise resistance welding, CNC drill & tap, CNC lathing, parts kit packaging & fulfillment services
1450 E Parrish Ave Owensboro, KY 42303-0837
49 (2015)
Full-time Employment: Established:
1989
NAICS Codes: 332999, 339999, 561910 Contact: Mr. Mark Koeberlein, Genl Mgr
PO Box 1450 Owensboro, KY 42302-1450 270-683-5323 www.modweldco.com Steel (cs & ss) storage tanks, pressure vessels & miscellaneous fabrication (10ga - 2" thick;