CC-CC February 2009 (Replaces CC-CC, 04/07)
CLIMATE CONTROL
REFRIGERATION PRODUCTS Condensed Catalog
www.coldyoucancounton.com
Table of Contents Reach-In Unit Coolers
Condensing Units
Model TA Thin Profile Air Defrost....................................................3
Model CH 1/2-5 HP Hermetic Indoor/Outdoor...................... 16
Model TL Thin Profile Electric Defrost...........................................3
Model CZ 2-6 HP Scroll® Indoor/Outdoor................................ 17
Model C High Profile Air Defrost.....................................................3
Model CS 1/2-5 HP Semi-Hermetic Indoor/Outdoor............ 18
Model VA V-Profile Air Defrost.........................................................4
Models CD/CZ 3-22 HP Discus® Indoor/Outdoor...................... 19
Models BBM, BBL Back Bar................................................................4
Model CDH 15-40 HP Discus® Outdoor..................................... 20
Model KMK Standard Mullion..........................................................4
Model CDD 24-80 HP Dual Compressor Outdoor................. 21
Model RAMK Reverse Air Mullion...................................................5
Model HWN 1/2-5 HP Hermetic Indoor Water-Cooled........ 22
Model BTO Twin Flow.........................................................................5
Model ZWN 3-6 HP Scroll® Indoor Water-Cooled................... 22
Model U Dual Aire................................................................................5
Model SWN 3/4-20 HP Indoor Water-Cooled.......................... 23
Models LTA, LTL Extended Thin Profile Unit Cooler..................6
Model SRN 3/4-20 HP Remote Indoor....................................... 24
Walk-In Unit Coolers
Air-Cooled Condensers
Model LSC Low Profile Air Defrost.................................................6
Model WSS 1-26 Tons....................................................................... 25
Models LSF, LFF Low Profile Electric Defrost..............................7
Model CNE Advantage Series....................................................... 26
Model LSH Low Profile Hot Gas Defrost.......................................7
Models CNQ, CNX Reliant Series.................................................. 27
Model LVC Low Air Flow Air Defrost..............................................8
Models CNL Reliant, CNH 1140 Series........................................ 28
Model LVD Low Air Flow Electric Defrost.....................................8 Model LVG Low Air Flow Hot Gas Defrost...................................8
Fluid Coolers
Model CWA Low Velocity Air Defrost............................................9
Model WGS Direct-Drive...................................................................29
Model CWE Low Velocity Electric Defrost....................................9 Model CWG Low Velocity Hot Gas Defrost..................................9 Model TLC Center Mount Air Defrost......................................... 10 Model TLF Center Mount Electric Defrost................................ 10 Model CMA Medium Profile Air Defrost.................................... 10 Models CME, CML Medium Profile Electric Defrost............... 11 Models CMG, CMF Medium Profile Hot Gas Defrost............. 11 Warehouse Unit Coolers Model CHA Large Unit Coolers Air Defrost.............................. 12 Models CHE, CHL Large Unit Coolers Electric Defrost.......... 12 Models CHG, CHF Large Unit Coolers Hot Gas Defrost........ 13 Packaged Systems Models PTT, PTN PRO3 Top Mount ............................................. 14 Model PST PRO3 Side Mount ........................................................ 15
Refrigeration Controls and Technology Beacon II™ Electronic Control Board.......................................... 29 Beacon II™ Smart Controller.......................................................... 29 Beacon II™ Smart Defrost............................................................... 29 Beacon II™ Smart Software............................................................ 29 Smart Defrost Kit™............................................................................ 29 Additional Products Climate Control Mohave Hot Gas Defrost ............................................................... 30 FlexPack™............................................................................................. 30 Engineered Solutions Air Handlers......................................................................................... 31 Indoor and Outdoor Racks............................................................. 31 Customer Specific Orders............................................................... 31
© 2009 Heatcraft Refrigeration Products, LLC
2
Reach-In Unit Coolers Thin Profile Air Defrost Unit Coolers Model TA
reach-in evaporators are thin units that mount in the top of a refrigerator, making the entire top shelf area usable. The attractive low silhouette makes this unit particularly desirable for display-type refrigerators. It can also be used in back bars, under counter cabinets or wherever space is at a premium. Drain fitting is at a 45° angle so drain can be run to the back or bottom of refrigerator. Sufficient space is provided to mount the expansion valve within the cabinet. Model TA is available with optional coated coil for corrosion protection (use model designation TAK). Also features sweat inlet connections to reduce leaks.
TA (K) Model TA10 TA13 TA17 TA23 TA30 TA43* TA55*
Capacity (BTUH)
Fan
10°F TD +25 SST
Qty.
CFM
1,000 1,300 1,700 2,300 3,000 4,300 5,500
1 2 2 3 3 4 5
120 170 210 330 360 540 650
Motor (Total FLA) Shaded Pole 208115/1/60 230/1/60 0.8 0.4 1.6 0.8 1.6 0.8 2.4 1.2 2.4 1.2 3.2 1.6 4.0 2.0
Dimensions (in.)
Connections (in.)
L
H
D
Liquid OD
16-1/2 20-1/2 24 31-5/8 40 53-3/8 53-3/8
4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 4-1/2 6-3/4
13-1/2 13-1/2 14-1/2 14-1/2 14-1/2 14-1/2 14-1/2
3/8 3/8 3/8 3/8 3/8 1/2 1/2
Suction ID
Drain OD
3/8 3/8 3/8 3/8 1/2 5/8 5/8
1/2 1/2 1/2 1/2 1/2 1/2 1/2
Approx. Net Wt. (lbs.) 10 13 17 23 26 36 45
* These models use external equalized expansion valve
Thin Profile Electric Defrost Unit Coolers Model TL
low temperature reach-in evaporators have a completely automatic defrost system. Mounted in the top of a refrigerator, its extremely compact cabinet makes it possible to utilize the entire top shelf area for storage. With a normal operating range of 15° F to –20° F, this unit is ideally suited for such applications as commercial freezers, ice cream boxes, bakery freezers and dual-temp reach-in boxes. Mechanical contact is provided between the heater elements and the drain pan, ensuring a warm pan during the defrost cycle. Sufficient space is provided to mount the expansion valve within the cabinet. Systems for both 115 volt and 208-230 volt operation are available. Also features sweat inlet connections to reduce leaks.
TL Model
Capacity (BTUH)
Fan
Motor (Total FLA)
Shaded Pole CFM 208115/1/60 230/1/60 TL09 900 1 110 0.8 0.4 TL12 1,200 2 210 1.6 0.8 TL16 1,600 2 210 1.6 0.8 TL21 2,100 1 240 1.0 0.5 TL28 2,800 3 335 1.2 TL35* 3,500 2 420 1.0 TL53* 5,300 3 595 1.5 * These models use external equalized expansion valve 10°F TD Qty. -10°F SST
Defrost Heater
Dimensions (in.)
115/1/60 230/1/60 Watts 475 600 700 1,100 1,430 1,600 1,950
Amps
Amps
4.1 5.2 6.1 9.6 -
2.1 2.6 3.0 4.8 5.7 7.0 8.5
Connections (in.)
L
H
D
Liquid OD
16-1/2 20-1/2 24 24 31-5/8 38-3/8 49-1/8
4-1/2 4-1/2 4-1/2 6-3/4 6-3/4 6-3/4 6-3/4
13-1/2 13-1/2 14-1/2 16-1/2 14-1/2 16-1/2 16-1/2
3/8 3/8 3/8 3/8 3/8 1/2 1/2
Suction ID
Drain OD
3/8 1/2 1/2 1/2 1/2 5/8 7/8
1/2 1/2 1/2 1/2 1/2 1/2 1/2
Approx. Net Wt. (lbs.) 10 15 19 19 22 31 45
High Profile Air Defrost Unit Coolers Model C unit coolers are ideal for refrigerated reach-ins. It mounts to the top of the refrigerator and discharges
cold air against the back wall. With this air flow pattern, the air is not blasted on the product, but is diffused along the back wall and then gently drawn across the product as it returns to the unit; thus, uniform temperatures are maintained throughout the refrigerator. In addition, door sweating and refrigeration loss due to door opening is greatly reduced because the air is not discharged against the doors. Mounting is easy with aluminum hangers that automatically space the unit the correct distance from the back wall. Sufficient space is provided to mount the expansion valve within the cabinet. Model C is available with an optional coated coil (designated as model CK) for corrosion protection. Also features sweat inlet connections to reduce leaks.
C (K) Model
Capacity (BTUH)
Fan
Motor (Total FLA)
Shaded Pole 10°F TD Qty. CFM 208+25 SST 115/1/60 230/1/60 C13 1,300 1 235 1.0 0.5 C17 1,700 1 250 1.0 0.5 C23 2,300 1 265 1.0 0.5 C30 3,000 2 480 2.0 1.0 C43* 4,300 2 520 2.0 1.0 * Size 43 uses external equalized expansion valve
Dimensions (in.)
Connections (in.)
L
H
D
Liquid OD
Suction ID
Drain OD
14-1/4 17-1/4 22-3/4 27-3/4 38
8-7/8 8-7/8 8-7/8 8-7/8 8-7/8
13-3/4 13-3/4 13-3/4 13-3/4 13-3/4
3/8 3/8 3/8 3/8 1/2
3/8 1/2 1/2 1/2 1/2
1/2 1/2 1/2 1/2 1/2
Approx. Net Wt. (lbs.) 12 12 17 21 33
3
Reach-In Unit Coolers V-Profile Air Defrost Unit Coolers Model VA reach-in evaporators are deluxe units designed for use in small reach-ins, back bar and under counter refrigerators, and many other applications where a small, compact unit is required. Sufficient space is provided to mount the expansion valve within the cabinet. The unit can be mounted from the ceiling or off the back or end walls or can be used in mullion application. VA is available with an optional coated coil for corrosion protection (use model designation VAK). Also features sweat inlet connections to reduce leaks.
VA (K) Model VA06 VA08 VA12 VA17
Capacity (BTUH)
Fan
Motor (Total FLA)
10°F TD +25 SST
Qty.
CFM
600 800 1,200 1,700
1 1 2 1
135 130 265 245
Dimensions (in.)
Shaded Pole 208115/1/60 230/1/60 0.8 0.4 0.8 0.4 1.6 0.8 1.0 0.5
Connections (in.)
L
H
D
Liquid OD
12-1/2 12-1/4 18 14
6-7/8 6-7/8 8 9-3/4
8-1/8 8-1/8 8-1/8 10-1/2
3/8 3/8 3/8 3/8
Suction ID
Drain OD
3/8 3/8 3/8 3/8
1/2 1/2 1/2 1/2
Approx. Net Wt. (lbs.) 7 7 12 9
Back Bar Unit Coolers Model BB back bar unit cooler is available in either air or electric defrost.
These compact, wall-mounted units are suitable for 35° F to 40° F (BBM medium temp models) and 0° F to -10° F (BBL low temp models) under-counter reach-in fixtures. Motors are thermally protected and lifetime lubricated. Fan blades and guards are molded from corrosion-proof Lexan®. Housing is made of grained aluminum for long life and easy cleaning. Also features sweat inlet connections to reduce leaks.
Capacity (BTUH) BB Model
BBL10 BBM11 BBL15 BBM16
Fan
Motor (Total FLA)
10°F TD
Qty.
CFM
HP
1,000 1,100 1,500 1,600
1 1 2 2
90 90 180 180
1/150 1/150 1/150 1/150
Heater
Shaded Pole 115/1/60 0.8 0.8 1.6 1.6
208230/1/60 0.4 0.4 0.8 0.8
Watts 275 350 -
Dimensions (in.)
115/1/60
208230/1/60
Amps
Amps
2.7 3.5 -
1.4 1.7 -
Connections (in.)
L
H
D
Liquid OD
19-3/4 19-3/4 26-1/4 26-1/4
14 14 14 14
5-1/2 5-1/2 5-1/2 5-1/2
1/2 1/2 1/2 1/2
Standard Mullion Unit Coolers Model KMK standard mullion unit coolers are ideal for use in under-counter reach-in refrigeration.
The thin-line design allows the unit to be mounted behind a mullion with sufficient clearance for the installation of tray slides. KMK has a unique fan arrangement that allows air to be drawn into the top of the unit, pulling return air from both sides of the mullion. This arrangement allows the coldest air to be in contact with drop-in trays. The versatile design of these compact mullions is also adaptable for mounting on the back wall or ends of a beverage cooler. The finned coil of KMK is protected by special coating as standard. Also features sweat inlet connections to reduce leaks.
KMK Model KMK13 KMK17 KMK23
4
Capacity (BTUH)
Fan
10°F TD +25 SST
Qty.
CFM
1,300 1,700 2,300
2 2 3
180 170 255
Motor (Total FLA) Shaded Pole 208115/1/60 230/1/60 1.6 0.8 1.6 0.8 2.4 1.2
Dimensions (in.) L
H
15-5/8 17-3/4 15-5/8 19-3/4 22 19-3/4
Connections (in.)
D
Liquid OD
Suction ID
Drain OD
5-5/8 5-5/8 5-5/8
3/8 3/8 3/8
3/8 3/8 1/2
5/8 5/8 5/8
Approx. Net Wt. (lbs.) 15 17 23
Suction ID
Drain OD
3/8 3/8 3/8 3/8
1/2 1/2 1/2 1/2
Approx. Net Wt. (lbs.) 13 12 15 14
Reach-In Unit Coolers Reverse Air Mullion Unit Coolers Model RAMK reverse air mullion unit coolers are ideal for use in under-counter reach-in refrigeration.
The thin-line design allows the unit to be mounted behind a mullion with sufficient clearance for the installation of tray slides. RAMK or reverse air mullion draws air to the coil at the bottom and discharges the cooled air out the top. This arrangement allows the coldest air to be in contact with drop-in trays. The versatile design of these compact reverse air mullions is also adaptable for mounting on the back wall or ends of a beverage cooler. The finned coil of RAMK is protected by special coating as standard. Also features sweat inlet connections to reduce leaks.
RAMK Model RAMK13 RAMK17 RAMK23
Capacity (BTUH)
Fan
10°F TD +25 SST
Qty.
CFM
1,300 1,700 2,300
2 2 3
180 170 255
Motor (Total FLA) Shaded Pole 208115/1/60 230/1/60 1.6 0.8 1.6 0.8 2.4 1.2
Dimensions (in.) L
D
Liquid OD
Suction ID
Drain OD
5-5/8 5-5/8 5-5/8
3/8 3/8 3/8
3/8 3/8 1/2
5/8 5/8 5/8
H
15-5/8 17-3/4 15-5/8 19-3/4 22 19-3/4
Connections (in.)
Approx. Net Wt. (lbs.) 15 17 23
Twin-Flow Unit Coolers Model BTO twin-flow unit cooler is a compact two-way design with medium velocity airflow.
The unit is mounted flush to the ceiling and draws air in to the fan and discharges out both sides. The air pattern reduces air loss when doors are opened and the medium velocity reduces product drying. Twin-flow units are for applications of 35° F and higher. Box temperatures are kept more constant throughout and fresh products last longer. Seven sizes are available from 900 to 5,500 BTUH at 10° TD. The BTO is available with an optional coated coil for corrosion protection (use model designation BTOK). Also features sweat inlet connections to reduce leaks.
BTO (K) Model BTO09 BTO13 BTO18 BTO25* BTO35* BTO45* BTO55*
Capacity (BTUH)
Fan
10°F TD +25 SST
Qty.
CFM
900 1,300 1,800 2,500 3,500 4,500 5,500
1 2 1 2 2 2 1
130 240 255 460 425 550 730
Motor (Total FLA) Shaded Pole 208115/1/60 230/1/60 0.8 0.4 1.6 0.8 1.0 0.5 2.0 1.0 2.0 1.0 2.0 1.0 2.1 1.1
Dimensions (in.)
Connections (in.)
L
H
D
Inlet OD
Suction ID
Drain OD
19-1/8 19-1/8 19-1/8 26-1/8 26-1/8 29-1/8 29-1/8
4-7/8 5-3/4 5-3/4 6-3/4 6-3/4 9-1/4 8-1/2
16-1/8 16-1/8 16-1/8 18-1/8 18-1/8 21-1/8 21-1/8
1/2 1/2 1/2 1/2 1/2 1/2 1/2
1/2 1/2 1/2 1/2 1/2 1/2 1/2
1/2 1/2 1/2 1/2 1/2 5/8 5/8
Approx. Net Wt. (lbs.) 9 11 12 19 20 29 29
* These models use external equalized expansion valves
Dual Air Unit Coolers Model U unit cooler is used wherever a small, compact unit is required, such as salad boxes, back bars and direct-draw boxes. It can be mounted on the ceiling or wall. The Model U unit draws air in to the front and discharges it out both sides to ensure proper distribution of cool air and maintain a uniform box temperature. Also features flare connections. U is available with an optional coated coil for corrosion protection (use model designation UK).
U (K) Model U09 U12 U15
Capacity (BTUH) 10°F TD +25 SST 850 1,150 1,500
Fan Qty. CFM 1 1 1
190 250 310
Motor (Total FLA) Shaded Pole 208115/1/60 230/1/60 0.45 0.55 0.45 0.55 1.10 0.55
Dimensions (in.)
Connections (in.)
L
H
D
Liquid FN
Suction ID
Drain OD
11-1/2 17-1/2 17-1/2
8-1/2 8-1/2 9-1/2
8-7/8 8-7/8 10-7/8
1/2 1/2 1/2
3/8 3/8 3/8
1/2 1/2 1/2
Approx. Net Wt. (lbs.) 8 8 12
5
Reach-In Unit Coolers Extended Thin Profile Unit Cooler Models LTA, LTL unit coolers are the most compact designed unit for reach-in display
cases. The unit’s low height design allows the unit to ‘hide’ at the top of the cooler, giving the case a cleaner look and allows for more room for shelves and product. These units have front-access end panels for easy access to refrigerant and electrical compartments, along with modular front-access panels that make it easy to access the motors. Internally enhanced tube design provides increased unit performance. Better performance, easy installation, servicing and the quality of Climate Control makes this unit the perfect fit for your display case needs. Capacity (BTUH)
LTA Model
Fan
Motor (Total FLA)
10°F TD* Qty. CFM
HP
LTA053 LTA079 LTA102 LTA134 LTA172
5,300 7,900 10,200 13,400 17,200
2 3 4 5 6
850 1,350 1,800 2,250 2,550
1/20 1/20 1/20 1/20 1/20
LTL046BA LTL068BA LTL093BA LTL115BA LTL133BA
4,600 6,800 9,300 11,500 13,300
2 3 4 5 6
850 1,300 1,700 2,100 2,550
1/20 1/20 1/20 1/20 1/20
Defrost Heater
Dimensions (in.)
Shaded Pole 208-230/1/60 L 208115/1/60 Watts Amps 230/1/60 LTA Air Defrost 3.6 2.0 – – 49-3/8 5.4 3.0 – – 69-1/8 7.2 4.0 – – 88-7/8 9.0 5.0 – – 108-5/8 10.8 6.0 – – 128-3/8 LTL Electric Defrost – 2.0 1,100 4.8 49.50 – 3.0 1,650 7.2 69.25 – 4.0 2,200 9.6 89.00 – 5.0 2,750 12.0 108.75 – 6.0 3,300 14.4 128.50
Connections (in.)
Approx. Net Wt. Coil External Suction Drain (lbs.) Inlet Equalizer ID MPT OD OD
H
D
8-7/8 8-7/8 8-7/8 8-7/8 8-7/8
18-1/8 18-1/8 18-1/8 18-1/8 18-1/8
1/2 1/2 1/2 1/2 1/2
5/8 5/8 7/8 7/8 1-1/8
1/4 1/4 1/4 1/4 1/4
3/4 3/4 3/4 3/4 3/4
48 69 85 108 124
8-7/8 8-7/8 8-7/8 8-7/8 8-7/8
18-1/8 18-1/8 18-1/8 18-1/8 18-1/8
1/2 1/2 1/2 1/2 1/2
5/8 5/8 7/8 7/8 1-1/8
1/4 1/4 1/4 1/4 1/4
3/4 3/4 3/4 3/4 3/4
48 69 85 108 124
*+25 SST Air, -10 SST Electric
Walk-In Unit Coolers Low Profile Air Defrost Evaporators Model LSC low profile, air defrost unit coolers are designed for maximum capacity with minimum headroom,
space and energy. These units are suitable for use with R-22, R-507, or R-404A. The units are only 15” high and are designed to mount flush with top of the cooler. The LSC cabinet design features easy front access to electrical and refrigeration components. LSC units also feature extended model and capacity offering to better match with Climate Control condensing units. Advancements include plastic black fan guard design with optional wire guards; front-facing electric board for easy access and optimized space in end panels. Improved drain pan design. Motor harness and solenoid harness are easier to access from the bottom of the coil. Solenoid harness come standard. Available with PSC and EC motor options.
LSC Model LSC040 LSC052 LSC065 LSC070 LSC090 LSC104 LSC120 LSC130 LSC140 LSC156 LSC180 LSC208 LSC260 LSC312 LSC370 1
Capacty (BTUH)
Fan
10°F TD +25 SST
Qty.
CFM
4,000 5,200 6,500 7,000 9,000 10,400 12,000 13,000 14,000 15,600 18,000 20,800 26,000 31,200 37,000
1 1 1 2 2 2 2 2 3 3 3 4 5 6 6
730 700 650 1,460 1,400 1,400 1,300 1,300 2,100 2,100 1,950 2,800 3,250 3,900 3,900
Motor (Total FLA)
Dimensions (in.) Connections1 (in.)
Shaded Pole PSC, PSC-TE EC L 208208208115/1/60 115/1/60 460/1/60 115/1/60 230/1/60 230/1/60 230/1/60 1.8 1.0 1.0 0.5 0.4 0.9 0.5 29-1/2 1.8 1.0 1.0 0.5 0.4 0.9 0.5 29-1/2 1.8 1.0 1.0 0.5 0.4 0.9 0.5 29-1/2 3.6 2.0 2.0 1.0 0.8 1.8 1.0 45-1/2 3.6 2.0 2.0 1.0 0.8 1.8 1.0 45-1/2 3.6 2.0 2.0 1.0 0.8 1.8 1.0 45-1/2 3.6 2.0 2.0 1.0 0.8 1.8 1.0 45-1/2 3.6 2.0 2.0 1.0 0.8 1.8 1.0 45-1/2 5.4 3.0 3.0 1.5 1.2 2.7 1.5 61-1/2 5.4 3.0 3.0 1.5 1.2 2.7 1.5 61-1/2 5.4 3.0 3.0 1.5 1.2 2.7 1.5 61-1/2 7.2 4.0 4.0 2.0 1.6 3.6 2.0 77-1/2 9.0 5.0 5.0 2.5 2.0 4.5 2.5 93-1/2 10.8 6.0 6.0 3.0 2.4 5.4 3.0 109-1/2 10.8 6.0 6.0 3.0 2.4 5.4 3.0 109-1/2
Drain MPT 3/4" for all air defrost models
6
(with PSC and EC motor options)
H
D
Inlet OD
Suction ID
15 15 15 15 15 15 15 15 15 15 15 15 15 15 15
15 15 15 15 15 15 15 15 15 15 15 15 15 15 15
1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2
5/8 5/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 1-1/8 1-1/8 1-1/8 1-3/8
Approx. Net Wt. (lbs.) 28 31 34 45 48 49 51 53 63 67 69 82 103 124 127
Walk-In Unit Coolers Low Profile Electric Defrost Evaporators Models LSF/LFF low profile, electric defrost unit coolers offer the same features as the air defrost models above and are available in 6 or 4 fins per inch models. Available with PSC and EC motor options. Capacty (BTUH)
Fan
LSF/ LFF 10°F TD Model Qty. CFM -20 SST
Motor (Total FLA) Shaded Pole 208230/1/60
208230/1/60
PSC, PSC-TE
LSF035 LSF040 LSF047 LSF065 LSF075 LSF090 LSF120 LSF140 LSF160 LSF180 LSF200 LSF240 LSF280
3,500 4,000 4,700 6,500 7,500 9,000 12,000 14,000 16,000 18,000 20,000 24,000 28,000
1 1 1 2 2 2 3 3 4 4 5 6 6
700 700 650 1,400 1,300 1,300 2,100 1,950 2,600 2,600 3,250 3,900 3,900
1.0 1.0 1.0 2.0 2.0 2.0 3.0 3.0 4.0 4.0 5.0 6.0 6.0
0.5 0.5 0.5 1.0 1.0 1.0 1.5 1.5 2.0 2.0 2.5 3.0 3.0
LFF041 LFF068 LFF080 LFF102 LFF136 LFF170 LFF204 LFF235
4,100 6,800 8,000 10,200 13,600 17,000 20,400 23,500
1 2 2 3 4 5 6 6
690 1,380 1,380 2,170 2,760 3,450 4,140 4,140
1.0 2.0 2.0 3.0 4.0 5.0 6.0 6.0
0.5 1.0 1.0 1.5 2.0 2.5 3.0 3.0
Defrost Heater (amps) Dimensions (in.) EC
208230/1 208230/1/60 LSF Models 6 Fins Per Inch 0.4 0.5 3.9 0.4 0.5 3.9 0.4 0.5 3.9 0.8 1.0 7.8 0.8 1.0 7.8 0.8 1.0 7.8 1.2 1.5 11.7 1.2 1.5 11.7 1.6 2.0 15.7 1.6 2.0 15.7 2.0 2.5 19.6 2.4 3.0 23.5 2.4 3.0 23.5 LFF Models 4 Fins Per Inch 0.4 0.5 3.9 0.8 1.0 7.8 0.8 1.0 7.8 1.2 1.5 11.7 1.6 2.0 15.7 2.0 2.5 19.6 2.4 3.0 23.5 2.4 3.0 23.5
460/1/60
Connections1 (in.)
Approx. Net Wt. Suction (lbs.) ID
208230/1
460/1
L
H
D
Inlet OD
2.3 2.3 2.3 4.5 4.5 4.5 6.8 6.8 9.0 9.0 11.3 13.6 13.6
2.0 2.0 2.0 3.9 3.9 3.9 5.9 5.9 7.8 7.8 9.8 11.7 11.7
29-1/2 29-1/2 29-1/2 45-1/2 45-1/2 45-1/2 61-1/2 61-1/2 77-1/2 77-1/2 93-1/2 109-1/2 109-1/2
15 15 15 15 15 15 15 15 15 15 15 15 15
15 15 15 15 15 15 15 15 15 15 15 15 15
1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2
5/8 5/8 5/8 5/8 7/8 7/8 7/8 7/8 1-1/8 1-1/8 1-1/8 1-1/8 1-1/8
24 26 29 43 45 48 60 62 81 84 101 121 124
2.3 4.5 4.5 6.8 9.0 11.3 13.6 13.6
2.0 3.9 3.9 5.9 7.8 9.8 11.7 11.7
29-1/2 45-1/2 45-1/2 61-1/2 77-1/2 93-1/2 109-1/2 109-1/2
15 15 15 15 15 15 15 15
15 15 15 15 15 15 15 15
1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2
5/8 7/8 7/8 7/8 1-1/8 1-1/8 1-1/8 1-1/8
28 44 47 59 80 100 120 123
Low Profile Hot Gas Defrost Evaporators Model LSH low profile, hot gas defrost unit coolers offer the same features as the air defrost models above and are available in 6 or 4 fins per inch models. Available with PSC and EC motor options. Optional field or factory-installed hot gas defrost kits available. Capacty (BTUH)
Fan
Motor (Total FLA)
LSH Shaded Pole PSC, PSC-TE EC Model 10°F TD Qty. CFM 208208208-20 SST 115/1/60 115/1/60 460/1/60 115/1/60 230/1/60 230/1/60 230/1/60 LSH Models 6 Fins Per Inch LSH035 3,500 1 700 1.8 1.0 1.0 0.5 0.4 1.1 0.6 LSH040 4,000 1 700 1.8 1.0 1.0 0.5 0.4 1.1 0.6 LSH047 4,700 1 650 1.8 1.0 1.0 0.5 0.4 1.1 0.6 LSH065 6,500 2 1,400 3.6 2.0 2.0 1.0 0.8 2.0 1.1 LSH075 7,500 2 1,300 3.6 2.0 2.0 1.0 0.8 2.0 1.1 LSH090 9,000 2 1,300 3.6 2.0 2.0 1.0 0.8 2.0 1.1 LSH120 12,000 3 2,100 5.4 3.0 3.0 1.5 1.2 2.9 1.6 LSH140 14,000 3 1,950 5.4 3.0 3.0 1.5 1.2 2.9 1.6 LSH160 16,000 4 2,600 7.2 4.0 4.0 2.0 1.6 3.8 2.1 LSH180 18,000 4 2,600 7.2 4.0 4.0 2.0 1.6 3.8 2.1 LSH200 20,000 5 3,250 9.0 5.0 5.0 2.5 2.0 4.7 2.6 LSH240 24,000 6 3,900 10.8 6.0 6.0 3.0 2.4 5.6 3.1 LSH280 28,000 6 3,900 10.8 6.0 6.0 3.0 2.4 5.6 3.1 LSH Models 4 Fins Per Inch LSH041 4,100 1 690 1.8 1.0 1.0 0.5 0.4 1.1 0.6 LSH068 6,800 2 1,380 3.6 2.0 2.0 1.0 0.8 2.0 1.1 LSH080 8,000 2 1,380 3.6 2.0 2.0 1.0 0.8 2.0 1.1 LSH102 10,200 3 2,170 5.4 3.0 3.0 1.5 1.2 2.9 1.6 LSH136 13,600 4 2,760 7.2 4.0 4.0 2.0 1.6 3.8 2.1 LSH170 17,000 5 3,450 9.0 5.0 5.0 2.5 2.0 4.7 2.6 LSH204 20,400 6 4,140 10.8 6.0 6.0 3.0 2.4 5.6 3.1 LSH235 23,500 6 4,140 10.8 6.0 6.0 3.0 2.4 5.6 3.1
Drain MPT 3/4" for all electric and hot gas defrost models. Side Port OD 3/8" and Hot Gas Pan Connection 5/8" for all hot gas defrost models. 1
Dimensions (in.)
Connections1 (in.) Suction ID
Approx. Net Wt. (lbs.)
L
H
D
Inlet ODF
29-1/2 29-1/2 29-1/2 45-1/2 45-1/2 45-1/2 61-1/2 61-1/2 77-1/2 77-1/2 93-1/2 109-1/2 109-1/2
15 15 15 15 15 15 15 15 15 15 15 15 15
15 15 15 15 15 15 15 15 15 15 15 15 15
5/8 5/8 5/8 5/8 7/8 7/8 7/8 7/8 7/8 1-1/8 1-1/8 1-1/8 1-1/8
5/8 5/8 5/8 5/8 7/8 7/8 7/8 7/8 1-1/8 1-1/8 1-1/8 1-1/8 1-1/8
26 28 31 45 47 50 62 64 83 86 103 123 126
29-1/2 45-1/2 45-1/2 61-1/2 77-1/2 93-1/2 109-1/2 109-1/2
15 15 15 15 15 15 15 15
15 15 15 15 15 15 15 15
5/8 5/8 5/8 7/8 7/8 7/8 7/8 1-1/8
5/8 7/8 7/8 7/8 1-1/8 1-1/8 1-1/8 1-1/8
30 46 49 61 82 102 122 125
7
Walk-In Unit Coolers Low Flow Low Velocity Air Defrost Unit Coolers Model LVC are ideal for meat storage and preparation rooms, floral coolers, dough retarding
and many other applications requiring low air velocities and low sound levels. With low velocity unit coolers, high humidities can be maintained to minimize product shrinkage and dehydration. These units are ideal for any type of workroom where human comfort is important.
(with PSC and EC motor options)
With a low, narrow construction and strong aluminum hanger bars, Low Flow Low Velocity is perfect for use in between rail beams in meat storage and aging rooms and is easy to install. Model LVC has been designed for the attractive appearance and easy cleaning necessary in food processing. A double drain pan system eliminates sweating problems, and the rust-free, all-aluminum white case ensures the long-lasting professional look needed in customer areas or work rooms. Available with PSC and EC motor options.
LVC Model LVC070 LVC087 LVC118 LVC125 LVC150 LVC165 LVC189 LVC225 LVC266
Capacity (BTUH)* 10°F TD 7,000 8,700 11,800 12,500 15,000 16,500 18,900 22,500 26,600
Fan
15°F Qty. CFM TD 10,500 13,050 17,700 18,750 22,500 24,750 28,350 33,750 39,900
2 2 2 2 2 2 2 2 2
1,200 1,200 1,300 1,300 1,900 1,900 2,400 2,700 3,200
Motor (Total FLA) Dimensions (in.) Connections (in.) Approx. Shaded Pole PSC EC Net Wt. Liq. Suct. Drain (lbs.) L H D 208208208OD OD NPS 115/1/60 115/1/60 460/1/60 115/1/60 230/1/60 230/1/60 230/1/60 3.6 2.4 1.24 0.82 – 1.8 1.0 83 14 23-1/4 1/2 7/8 3/4 178 3.6 2.4 1.24 0.82 – 1.8 1.0 83 14 23-1/4 1/2 7/8 3/4 189 3.6 2.4 1.24 0.82 – 1.8 1.0 111 14-1/2 23-1/4 1/2 7/8 3/4 262 3.6 2.4 1.24 0.82 – 1.8 1.0 111 14-1/2 23-1/4 1/2 7/8 3/4 264 3.6 2.4 1.24 0.82 – 1.8 1.0 114 16 23-1/4 1/2 1-1/8 3/4 280 3.6 2.4 1.24 0.82 – 1.8 1.0 114 16 23-1/4 1/2 1-1/8 3/4 285 – – 2.80 1.40 0.8 4.8 2.4 134 16-1/2 23-1/4 1/2 1-1/8 3/4 298 – – 2.80 1.40 0.8 4.8 2.4 153 16-1/2 23-1/4 1/2 1-1/8 3/4 366 – – 2.80 1.40 0.8 4.8 2.4 158 20 28-1/4 1/2 1-3/8 3/4 405
Low Flow Low Velocity Electric Defrost Unit Coolers Model LVD offers the same features as air defrost models and are designed for use from 28°F to 34°F. The high efficiency, fast electric defrost allows the LVD to maintain room temperature and minimize incidence of sliming and the formation of bacterial growth.
LVD Model LVD070 LVD087 LVD118 LVD125 LVD150 LVD165 LVD189 LVD225 LVD266
Capacity (BTUH)* 10°F TD 7,000 8,700 11,800 12,500 15,000 16,500 18,900 22,500 26,600
Fan
15°F Qty. CFM TD 10,500 13,050 17,700 18,750 22,500 24,750 28,350 33,750 39,900
2 2 2 2 2 2 2 2 2
1,200 1,200 1,300 1,300 1,900 1,900 2,400 2,700 3,200
Motor (Total FLA) Shaded Pole PSC EC 208208208460/1/60 230/1/60 230/1/60 230/1/60 2.4 0.82 – 1.0 2.4 0.82 – 1.0 2.4 0.82 – 1.0 2.4 0.82 – 1.0 2.4 0.82 – 1.0 2.4 0.82 – 1.0 – 1.40 0.8 4.8 – 1.40 0.8 4.8 – 1.40 0.8 4.8
Defrost Heater 230/1/60
Watts 2,650 2,650 3,850 3,850 3,850 3,850 4,770 5,700 5,700
Connections (in.)
Dimensions (in.)
Amps
L
H
D
11.5 11.5 16.7 16.7 16.7 16.7 20.7 24.8 24.8
83 83 111 111 114 114 134 153 158
14 14 14-1/2 14-1/2 16 16 16-1/2 16-1/2 20
23-1/4 23-1/4 23-1/4 23-1/4 23-1/4 23-1/4 23-1/4 23-1/4 28-1/4
Liq. OD 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2
Suct. OD 7/8 7/8 7/8 7/8 1-1/8 1-1/8 1-1/8 1-1/8 1-3/8
Approx. Net Wt. Drain (lbs.) NPS 3/4 178 3/4 189 3/4 262 3/4 264 3/4 280 3/4 285 3/4 298 3/4 366 3/4 405
Low Flow Low Velocity Hot Gas Defrost Unit Coolers Model LVG offers the same features as air defrost models and are designed for use from 28°F to 34°F. The hot gas defrost kit is available for field installation. Capacity (BTUH)* LVG Model
LVG070 LVG087 LVG118 LVG125 LVG150 LVG165 LVG189 LVG225 LVG266
* +25 SST
8
10°F TD 7,000 8,700 11,800 12,500 15,000 16,500 18,900 22,500 26,600
Fan
15°F Qty. CFM TD 10,500 13,050 17,700 18,750 22,500 24,750 28,350 33,750 39,900
2 2 2 2 2 2 2 2 2
1,200 1,200 1,300 1,300 1,900 1,900 2,400 2,700 3,200
Motor (Total FLA) Shaded Pole 115/1/60 3.6 3.6 3.6 3.6 3.6 3.6 – – –
PSC
Dimensions (in.) EC
Connections (in.) Approx. Net Wt. Hot Liq. Suct. Drain (lbs.) Gas NPS OD OD OD
L H D 208208208115/1/60 460/1/60 115/1/60 230/1/60 230/1/60 230/1/60 2.4 1.24 1.0 – 1.8 1.0 83 14 23-1/4 7/8 7/8 2.4 1.24 1.0 – 1.8 1.0 83 14 23-1/4 7/8 7/8 2.4 1.24 1.0 – 1.8 1.0 111 14-1/2 23-1/4 7/8 7/8 2.4 1.24 1.0 – 1.8 1.0 111 14-1/2 23-1/4 7/8 7/8 2.4 1.24 1.0 – 1.8 1.0 114 16 23-1/4 7/8 1-1/8 2.4 1.24 1.0 – 1.8 1.0 114 16 23-1/4 7/8 1-1/8 – 2.80 1.4 .08 4.8 2.4 134 16-1/2 23-1/4 7/8 1-1/8 – 2.80 1.4 .08 4.8 2.4 153 16-1/2 23-1/4 7/8 1-1/8 – 2.80 1.4 .08 4.8 2.4 158 20 28-1/4 7/8 1-3/8
1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 5/8
3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4
178 189 262 264 280 285 298 366 405
Walk-In Unit Coolers Low Velocity Center Mount Air Defrost Unit Coolers Model CWA is ideal for floral storage, fresh fruit and vegetables, dough retarding, fresh meat storage and preparation and many other applications of 35° F and above. The low air flow and quiet fans are classically suited for work-room applications.
The generous coil surface combined with close TD system balance provides high humidity characteristics to minimize product shrinkage and drying. Available with PSC and EC motor options.
CWA Model CWA050 CWA075 CWA100 CWA130 CWA155 CWA180 CWA210 CWA270 CWA340
Capacity (BTUH)* 10°F TD
15°F TD
5,000 7,500 10,000 13,000 15,500 18,000 21,000 27,000 34,000
7,500 11,250 15,000 19,500 23,250 27,000 31,500 40,500 51,000
Fan Qty. CFM 1 1 2 2 2 3 4 4 5
725 730 1,450 1,470 1,460 2,130 2,840 2,800 3,500
Motor (Total FLA) Shaded Pole 208115/1/60 230/1/60 2.1 1.1 2.1 1.1 4.2 2.2 4.2 2.2 4.2 2.2 6.3 3.3 8.4 4.4 8.4 4.4 10.5 5.5
Dimensions (in.)
PSC 115/1/60 0.9 0.9 1.8 1.8 1.8 2.7 3.6 3.6 4.5
208230/1/60 0.5 0.5 1.0 1.0 1.0 1.5 2.0 2.0 2.5
(with PSC and EC motor options)
EC 115/1/60 0.9 0.9 1.8 1.8 1.8 2.7 3.6 3.6 4.5
208230/1/60 0.5 0.5 1.0 1.0 1.0 1.5 2.0 2.0 2.5
L
H
D
53-1/2 75-1/2 75-1/2 75-1/2 75-1/2 75-1/2 97-1/2 97-1/2 119-1/2
8-7/8 8-7/8 11-3/8 15-1/8 15-1/8 15-1/8 15-1/8 15-1/8 15-1/8
26-5/8 26-5/8 26-5/8 26-5/8 26-5/8 26-5/8 26-5/8 26-5/8 26-5/8
Connections (in.)
App. Net Liquid Suction Drain Wt. OD OD FPT (lbs.) 1/2 1/2 1/2 1-1/8 1-1/8 1-1/8 1-1/8 1-3/8 1-3/8
7/8 7/8 7/8 1-1/8 1-1/8 1-1/8 1-1/8 1-3/8 1-3/8
3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4
70 103 106 145 149 160 193 200 242
Low Velocity Center Mount Electric Defrost Unit Coolers Model CWE offers the same benefits as the air defrost models above and is ideal for applications of 24° F and above. CWE Model CWE050 CWE075 CWE100 CWE130 CWE155 CWE180 CWE210 CWE270 CWE340
Capacity Fan (BTUH)* 10°F 15°F Qty. CFM TD TD 5,000 7,500 1 725 7,500 11,250 1 730 10,000 15,000 2 1,450 13,000 19,500 2 1,470 15,500 23,250 2 1,460 18,000 27,000 3 2,130 21,000 31,500 4 2,840 27,000 40,500 4 2,800 34,000 51,000 5 3,500
Motor (Total FLA) Shaded Pole 208-230/1/60 1.1 1.1 2.2 2.2 2.2 3.3 4.4 4.4 5.5
PSC EC 208-230/1/60 208-230/1/60 0.5 0.5 0.5 0.5 1.0 1.0 1.0 1.0 1.0 1.0 1.5 1.5 2.0 2.0 2.0 2.0 2.5 2.5
App. Net 208-230/1/60 Liquid Suction Drain Wt. L H D OD OD FPT (lbs.) Amps 8.7 53-1/2 8-7/8 26-5/8 1/2 7/8 3/4 75 10.5 75-1/2 8-7/8 26-5/8 1/2 7/8 3/4 108 12.2 75-1/2 11-3/8 26-5/8 1/2 7/8 3/4 111 17.4 75-1/2 15-1/8 26-5/8 1-1/8 1-1/8 3/4 150 17.4 75-1/2 15-1/8 26-5/8 1-1/8 1-1/8 3/4 154 17.4 75-1/2 15-1/8 26-5/8 1-1/8 1-1/8 3/4 157 22.6 97-1/2 15-1/8 26-5/8 1-1/8 1-1/8 3/4 203 22.6 97-1/2 15-1/8 26-5/8 1-3/8 1-3/8 3/4 208 30.4 119-1/2 15-1/8 26-5/8 1-3/8 1-3/8 3/4 250
Defrost Heater Watts 2,000 2,400 2,800 4,000 4,000 4,000 5,200 5,200 7,000
Dimensions (in.)
Connections (in.)
Low Velocity Center Mount Hot Gas Defrost Unit Coolers Model CWG offers the same benefits as the air defrost models above and is ideal for applications of 24° F and above. The hot gas defrost kit is available for field installation. CWG Model CWG100 CWG130 CWG155 CWG180 CWG210 CWG270 CWG340
Capacity (BTUH)* 10°F TD
15°F TD
10,000 13,000 15,500 18,000 21,000 27,000 34,000
15,000 19,500 23,250 27,000 31,500 40,500 51,000
Fan
Motor (Total FLA) Shaded Pole
Qty. CFM 2 2 2 3 4 4 5
1,450 1,470 1,460 2,130 2,840 2,800 3,500
2.2 2.2 2.2 3.3 4.4 4.4 5.5
Dimensions (in.)
PSC
115/1/60 230/1/60 115/1/60 4.2 4.2 4.2 6.3 8.4 8.4 10.5
Drain Pan Heater
1.8 1.8 1.8 2.7 3.6 3.6 4.5
EC Amps L 208208- Watts 208115/1/60 115/1/60 230/1/60 230/1/60 230/1/60 1.0 1.8 1.0 350 3.0 1.5 75-1/2 1.0 1.8 1.0 500 4.4 2.2 75-1/2 1.0 1.8 1.0 500 4.4 2.2 75-1/2 1.5 2.7 1.5 500 4.4 2.2 75-1/2 2.0 3.6 2.0 650 5.7 2.8 97-1/2 2.0 3.6 2.0 650 5.7 2.8 97-1/2 2.5 4.5 2.5 875 7.6 3.8 119-1/2
H
D
11-3/8 15-1/8 15-1/8 15-1/8 15-1/8 15-1/8 15-1/8
26-5/8 26-5/8 26-5/8 26-5/8 26-5/8 26-5/8 26-5/8
Connections (in.)1 App. Net Liq. Suct. Side Wt. OD OD Port (lbs.) 1/2 1-1/8 1-1/8 1-1/8 1-1/8 1-1/8 1-1/8
7/8 1-1/8 1-1/8 1-1/8 1-1/8 1-3/8 1-3/8
1/2 5/8 5/8 5/8 5/8 7/8 7/8
131 170 174 185 223 228 270
* +25 SST 1 Drain FPT 3/4" for all models
9
Walk-In Unit Coolers Center Mount Air Defrost Unit Coolers Model TLC units are compact, medium velocity coolers designed for use in 35° F and above
rooms. The low height gives more head room and allows product to be stacked higher. The center ceiling mount with dual air flow allows shelving and storage of product around all walls. Equipped with dual drain pans to prevent sweating, the TLC units have a heavy gauge grained-aluminum cabinet that cleans easily and looks attractive. The stainless steel screws prevent rust streaks and PVC coated fan guards won’t rust or rattle. Ease of installation and service are also part of the design. End panels can be removed quickly to access refrigerant components and electrical terminal block, without the need to drop the fan panel/drain pan. A quick-disconnect, waterproof plug and receptacle is supplied with each motor. Available with PSC and EC motor options.
TLC Model TLC052 TLC076 TLC090 TLC102 TLC108 TLC134 TLC156 TLC179 TLC208 TLC249
Capacity (BTUH)
Fan
Motor (Total FLA) Shaded Pole
5,200 7,600 9,000 10,200 10,800 13,400 15,600 17,900 20,800 24,900
1 2 2 2 3 3 3 4 4 5
610 1,300 1,260 1,220 1,950 1,890 1,830 2,520 2,440 3,050
2.1 4.2 4.2 4.2 6.3 6.3 6.3 8.4 8.4 10.5
1.1 2.2 2.2 2.2 3.3 3.3 3.3 4.4 4.4 5.5
Dimensions (in.)
PSC
10°F TD Qty. CFM +25 SST 115/1/60 230/1/60 115/1/60 0.9 1.8 1.8 1.8 2.7 2.7 2.7 3.6 3.6 4.5
(with PSC and EC motor options)
EC
L 208208115/1/60 230/1/60 230/1/60 0.5 0.9 0.5 31-1/2 1.0 1.8 1.0 53-1/2 1.0 1.8 1.0 53-1/2 1.0 1.8 1.0 53-1/2 1.5 2.7 1.5 75-1/2 1.5 2.7 1.5 75-1/2 1.5 2.7 1.5 75-1/2 2.0 3.6 2.0 97-1/2 2.0 3.6 2.0 97-1/2 2.5 4.5 2.5 119-1/2
Connections1 (in.)
H
D
Liquid OD
8-5/8 8-5/8 8-5/8 8-5/8 8-5/8 8-5/8 8-5/8 8-5/8 8-5/8 8-5/8
28-13/16 28-13/16 28-13/16 28-13/16 28-13/16 28-13/16 28-13/16 28-13/16 28-13/16 28-13/16
1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2
Approx. Net Wt. Suction (lbs.) OD 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 1-1/8 1-1/8
42 64 70 83 105 117 123 149 164 206
Center Mount Electric Defrost Unit Coolers Model TLF units offer the same great benefits as air defrost, but have defrost controls mounted and wired to a terminal board and are designed for –20° F to 34° F applications.
Capacity (BTUH) Fan Motor (Total FLA) Shaded Pole PSC EC TLF 10°F TD 12°F Model Qty. CFM 208208-20 SST TD 208-230/1 230/1/60 230/1/60 TLF040 4,000 4,800 1 610 1.1 0.5 0.5 TLF054 5,400 6,480 2 1,300 2.2 1.0 1.0 TLF065 6,500 7,800 2 1,260 2.2 1.0 1.0 TLF090 9,000 10,800 3 1,950 3.3 1.5 1.5 TLF130 13,000 15,600 3 1,830 3.3 1.5 1.5 TLF174 17,400 20,880 4 2,440 4.4 2.0 2.0 1
Defrost Heater
Dimensions (in.)
Connections1 (in.)
Watts
Amps
L
H
D
Inlet OD
1,200 2,000 2,000 2,400 3,600 4,800
5.3 8.7 8.7 10.5 15.7 20.9
31-1/2 53-1/2 53-1/2 75-1/2 75-1/2 97-1/2
8-5/8 8-5/8 8-5/8 8-5/8 8-5/8 8-5/8
28-13/16 28-13/16 28-13/16 28-13/16 28-13/16 28-13/16
1/2 1/2 1/2 1/2 1/2 1/2
Suction OD
Approx. Net Wt. (lbs.)
7/8 7/8 7/8 7/8 7/8 1-1/8
90 120 120 160 174 218
All TLC and TLF models have 1/4" OD external equalizer connections and 3/4" FPT drain connections
Medium Profile Air Defrost Unit Coolers Model CMA is designed with superior quality and dependable performance. With
features like the innovative Thermo-Flex™ coil design which carries a five-year limited warranty against refrigerant leaks, internal grooved tubing for greater heat transfer efficiency and motors that plug into the wiring harness for easier accessibility, these units provide long life and dependability to your refrigeration application. Having a modular design that is only 25 inches high, these unit coolers serve a variety of commercial and industrial applications. Air defrost models range in size from 13,000 to 71,000 BTUH. PSC motors standard, EC motor options available. Capacity Fan Motor (Total FLA) Dimensions (in.) Connections1 (in.) App. (BTUH) Net Wt. PSC EC 10°F TD Inlet Suct. (lbs.) Qty. CFM L H D +25 SST ODF ODF 115/1/60 230/1/60 460/1660 575/1/60 115/1/60 208-230/1/60 CMA130 13,000 1 2,300 4.0 1.8 1.0 0.75 2.8 1.4 39-5/16 25 22-7/8 1/2 7/8 115 CMA155 15,500 1 2,200 4.0 1.8 1.0 0.75 2.8 1.4 39-5/16 25 22-7/8 1/2 1-1/8 123 CMA245 24,500 2 4,600 8.0 3.6 2.0 1.5 5.6 2.8 67-5/16 25 22-7/8 7/8 1-1/8 134 CMA300 30,000 2 4,400 8.0 3.6 2.0 1.5 5.6 2.8 67-5/16 25 22-7/8 7/8 1-1/8 148 CMA365 36,500 3 6,900 12.0 5.4 3.0 2.25 8.4 4.2 95-5/16 25 22-7/8 7/8 1-3/8 200 CMA450 45,000 3 6,600 12.0 5.4 3.0 2.25 8.4 4.2 95-5/16 25 22-7/8 1-1/8† 1-3/8 227 CMA510 51,000 4 9,200 16.0 7.2 4.0 3.0 11.2 5.6 123-5/16 25 22-7/8 1-1/8† 1-5/8 230 CMA600 60,000 4 8,800 16.0 7.2 4.0 3.0 11.2 5.6 123-5/16 25 22-7/8 1-1/8† 1-5/8 255 CMA710 71,000 5 10,500 9.0 5.0 3.75 14.0 7.0 138-13/16 25 22-7/8 1-1/8† 1-5/8 285 1 All CMA coils have 1/4” OD external equalizer and 3/4” Drain FPT connections. † Supplied with adapter to 7/8 ODF. CMA Model
10
Walk-In Unit Coolers Medium Profile Electric Defrost Unit Coolers Models CME/CML offer the same great features as air defrost models and are available in 6 or 4 fins per inch ranging in size from 10,000 to 62,000 BTUH. CME/ CML Model
CME101 CME140 CME190 CME260 CME310 CME390 CME430 CME520 CME620 CML100 CML165 CML220 CML250 CML330 CML370 CML440 CML530
Capacity (BTUH)
Fan
Motor (Total FLA)
Defrost Heater (amps)
PSC EC 10°F TD 208208Qty. CFM 208- 460/1/60 575/1/60 208230/3/60 -20 SST 230/1/60 230/1/60 Watts 230/1/60 CME Models 6 Fins Per Inch 10,100 1 2,350 1.8 1.0 0.75 1.4 2,730 11.9 8.2 14,000 1 2,250 1.8 1.0 0.75 1.4 2,730 11.9 8.2 19,000 2 4,700 3.6 2.0 1.50 2.8 5,350 23.3 16.0 26,000 2 4,500 3.6 2.0 1.50 2.8 5,350 23.3 16.0 31,000 3 7,050 5.4 3.0 2.25 4.2 7,750 33.7 23.2 39,000 3 6,750 5.4 3.0 2.25 4.2 7,750 33.7 23.2 43,000 4 8,800 7.2 4.0 3.00 5.6 10,200 – 30.5 52,000 4 8,400 7.2 4.0 3.00 5.6 10,200 – 30.5 62,000 5 10,000 9.0 5.0 3.75 7.0 11,600 – 34.7 CML Models 4 Fins Per Inch 10,000 1 2,350 1.8 1.0 0.75 1.4 2,730 11.9 8.2 16,500 2 4,900 3.6 2.0 0.75 2.8 5,350 23.3 16.0 22,000 2 4,650 3.6 2.0 1.50 2.8 5,350 23.3 16.0 25,000 3 7,350 5.4 3.0 1.50 4.2 7,750 33.7 23.2 33,000 3 6,975 5.5 3.0 2.25 4.2 7,750 33.7 23.2 37,000 4 9,100 7.2 4.0 2.25 5.6 10,200 – 30.5 44,000 4 8,700 7.2 4.0 3.00 5.6 10,200 – 30.5 53,000 5 10,350 9.0 5.0 3.00 7.0 11,600 – 34.7
Dimensions (in.)
Connections1 App. (in.) Net Inlet Suct. Wt. ODF ODF (lbs.)
460/ 1/60
460/ 3/60
L
H
D
5.9 5.9 11.6 11.6 16.8 16.8 22.2 22.2 25.2
4.1 4.1 8.3 8.3 12.0 12.0 15.8 15.8 18.1
39-5/16 39-5/16 67-5/16 67-5/16 95-5/16 95-5/16 123-5/16 123-5/16 138-5/16
24 24 24 24 24 24 24 24 24
22-3/4 22-3/4 22-3/4 22-3/4 22-3/4 22-3/4 22-3/4 22-3/4 22-3/4
1/2 1/2 7/8 1-1/8† 1-1/8† 1-1/8† 1-1/8† 1-1/8† 1-1/8†
7/8 7/8 1-1/8 1-3/8 1-3/8 1-3/8 1-5/8 1-5/8 1-5/8
118 126 138 153 210 237 267 300 338
5.9 11.6 11.6 16.8 16.8 22.2 22.2 25.2
4.1 39-13/16 24 22-3/4 8.3 67-13/16 24 22-3/4 8.3 67-13/16 24 22-3/4 12.0 95-13/16 24 22-3/4 12.0 95-13/16 24 22-3/4 15.8 123-13/16 24 22-3/4 15.8 123-13/16 24 22-3/4 18.1 138-13/16 24 22-3/4
1/2 7/8 1-1/8† 1-1/8† 1-1/8† 1-1/8† 1-1/8† 1-1/8†
7/8 1-1/8 1-3/8 1-3/8 1-3/8 1-5/8 1-5/8 1-5/8
125 136 151 207 234 262 295 332
Medium Profile Hot Gas Defrost Unit Coolers Models CMG/CMF offer the same great features as air defrost models and are available in 6 or 4 fins per inch ranging in size from 16,500 to 52,000 BTUH. Optional field or factory-installed hot gas defrost kits available.
CMG/ CMF Model
Capacity (BTUH)
Fan
Motor (Total FLA)
CMG190
19,000
2
4,700
8.0
3.6
2.0
CMG260
26,000
2
4,500
8.0
3.6
2.0
EC 115/ 208460/ Watts 115/ 2081/60 230/1/60 1/60 1/60 230/1/60 CMG Models 6 Fins Per Inch 8.3 4.1 2.1 0.75 5.6 2.8 950 8.3 4.1 2.1 0.75 5.6 2.8 950
CMG310
31,000
3
7,050
12.0
5.4
3.0
1.50
8.4
4.2
1,350
11.7
5.9
CMG390
39,000
3
6,750
12.0
5.4
3.0
1.50
8.4
4.2
1,350
11.7
CMG430
43,000
4
8,800
16.0
7.2
4.0
2.25
11.2
5.6
1,800
CMG520
52,000
4
8,400
16.0
7.2
4.0
2.25
CMF165
16,500
2
4,900
8.0
3.6
2.0
CMF220
22,000
2
4,650
8.0
3.6
CMF250
25,000
3
7,350
12.0
CMF330
33,000
3
6,975
CMF370
37,000
4
CMF440
44,000
4
10°F TD Qty. CFM -20 SST
115/ 1/60
PSC 230/ 460/ 1/60 1/60
Defrost Heater (amps)
575/ 1/60
Dimensions (in.) L
H
D
Connections1 App. (in.) Net Inlet Suct. Wt. ODF ODF (lbs.)
67-5/16
24 22-3/4 1-1/8† 1-1/8
175
67-5/16
24 22-3/4 1-1/8† 1-3/8
190
2.9
95-5/16
24 22-3/4 1-1/8† 1-3/8
210
5.9
2.9
95-5/16
24 22-3/4 1-1/8† 1-3/8
237
15.7
7.8
3.9
123-5/16 24 22-3/4 1-1/8† 1-5/8
267
7.8
3.9
123-5/16 24 22-3/4 1-1/8† 1-5/8
300
4.1
2.1
67-13/16 24 22-3/4 1-1/8† 1-1/8
173
2.0
11.2 5.6 1,800 15.7 CMF Models 4 Fins Per Inch 8.3 0.75 5.6 2.8 950 8.3 0.75 5.6 2.8 950
4.1
2.1
67-13/16 24 22-3/4 1-1/8† 1-3/8
188
5.4
3.0
1.50
8.4
4.2
1,350
11.7
5.9
2.9
95-13/16 24 22-3/4 1-1/8† 1-3/8
207
12.0
5.4
3.0
1.50
8.4
4.2
1,350
11.7
5.9
2.9
95-13/16 24 22-3/4 1-1/8† 1-3/8
234
9,100
16.0
7.2
4.0
2.25
11.2
5.6
1,800
15.7
7.8
3.9
123-13/16 24 22-3/4 1-1/8† 1-5/8
262
8,700
16.0
7.2
4.0
2.25
11.2
5.6
1,800
15.7
7.8
3.9
123-13/16 24 22-3/4 1-1/8† 1-5/8
295
All CME, CML, CMG and CMF models have 1/4" OD external equalizer and 3/4” Drain FPT connections. All CMF and CMG models have 5/8” Side Port ODF and 7/8” Hot Gas Pan ODF connections. 1
†
Supplied with adapter to 7/8 ODF
11
Warehouse Unit Coolers Large Unit Coolers Air Defrost Model CHA air defrost unit coolers are ideal for warehouse cooler applications. With a wide
capacity range and the patented Thermo-Flex™ coil design, these large unit coolers provide efficient, reliable operation. Features include a mill finish aluminum cabinet, 850 RPM motors for low noise and high reliability, liquid line solenoid wiring harness for faster installation, Schrader fitting for easier suction temperature measurement. Also, the large unit coolers have captive fasteners on access panels for easy servicing — no fumbling with loose bolts and nuts. The CH Series also has a standardized terminal board for easier field wiring. Options include high CFM motor and fan combinations, totally enclosed motors, low temp motors for blast cooling, long air throw collars for large Warehouse/Industrial applications and insulated drain pans. PSC motors come standard to help you save energy.
CHA Model CHA520 CHA630 CHA750 CHA850 CHA930 CHA1100 CHA1170 CHA1400 CHA1610 CHA1900 CHA2200 CHA2440 CHA2160* CHA2500* CHA2780*
Capacity (BTUH)
Fan
10°F TD Qty. +25 SST 52,000 63,000 75,000 85,000 93,000 110,000 117,000 140,000 161,000 190,000 220,000 244,000 216,000 250,000 278,000
2 2 3 3 4 4 3 3 3 3 4 4 3 4 4
CFM 9,000 9,000 12,600 12,600 16,800 16,800 20,700 20,700 24,300 26,550 30,400 35,400 25,950 29,600 34,600
PSC Motor (Total FLA) 208-230/1/60 460/1/60 Dia. 208(in.) Wired Wired 230/3/60 Wired Wired 1 ph. 3 ph. 1 ph. 3 ph. 24 6.4 5.2 3.4 24 6.4 5.2 3.4 24 9.6 5.5 7.8 3.0 24 9.6 5.5 7.8 3.0 24 12.8 8.7 10.4 4.7 24 12.8 8.7 10.4 4.7 30 13.8 30 13.8 30 19.8 30 21.0 30 26.4 30 28.0 30 21.0 30 26.4 30 28.0 -
Dimensions (in.) 460/ 575/ 3/60 3/60 2.6 2.6 3.9 3.9 5.2 5.2 6.9 6.9 9.9 10.5 13.2 14.0 10.5 13.2 14.0
L
H
1.8 83-3/32 40-11/32 1.8 83-3/32 40-11/32 2.7 105-5/32 40-11/32 2.7 105-5/32 40-11/32 3.6 135-7/32 40-11/32 3.6 135-7/32 40-11/32 7.8 135-13/32 50-5/16 7.8 135-13/32 50-5/16 7.8 135-13/32 55-13/16 8.4 142-1/2 55-13/16 10.4 185-1/2 50-5/16 11.2 185-1/2 56-1/4 8.4 142-1/2 55-13/16 10.4 185-1/2 50-5/16 11.2 185-1/2 56-1/4
Connections (in.)1
D 29-1/2 29-1/2 29-1/2 29-1/2 29-1/2 29-1/2 41-3/32 41-3/32 41-3/32 41-3/32 41-3/32 41-3/32 41-3/32 41-3/32 41-3/32
Approx. Coil Ext. Net Wt. Suction Inlet Equal. (lbs.) ODF ODF ODF 1-1/8 1-5/8 1/4 270 1-1/8 1-5/8 1/4 300 1-3/8 2-1/8 1/4 390 1-3/8 2-1/8 1/4 430 1-3/8 2-1/8 1/4 515 1-3/8 2-1/8 1/4 565 1-3/8 2-1/8 1/4 738 1-5/8 2-1/8 1/4 800 1-3/8† 2-1/8† 1/4† 850 1-3/8 2-5/8 1/4 1,160 1-3/8 2-5/8 1/4 1,500 1-5/8 2-5/8 1/4 1,600 1-3/8 2-5/8 1/4 1,160 1-3/8 2-5/8 1/4 1,500 1-3/8 2-5/8 1/4 1,600
* These models are 8 fins per inch; all other air defrost models are 6 fins per inch.
Large Unit Coolers Electric Defrost Models CHE/CHL offer the same benefits as air defrost and are ideal for warehouse cooler/freezer applications. Capacity (BTUH)
Fan
CHE/CHL Model 10°F TD Qty. -20 SST
1
CFM
PSC Motor (Total FLA) 208-230/60 460/1/60 Dia. 208460/ 575/ (in.) Wired Wired 230/3/60 Wired Wired 3/60 3/60 1 ph. 3 ph. 1 ph. 3 ph.
CHE450 CHE550 CHE640 CHE740 CHE810 CHE950 CHE1020 CHE1200 CHE1390 CHE1650 CHE2120
45,000 55,000 64,000 74,000 81,000 95,000 102,000 120,000 139,000 165,000 212,000
2 2 3 3 4 4 3 3 3 3 4
9,000 9,000 12,600 12,600 16,800 16,800 20,700 20,700 24,300 26,550 35,400
24 24 24 24 24 24 30 30 30 30 30
6.4 6.4 -
5.5 5.5 8.7 8.7 -
5.2 5.2 7.8 7.8 10.4 10.4 13.8 13.8 19.8 21.0 28.0
CHL400 CHL480 CHL560 CHL650 CHL710 CHL840 CHL890 CHL1050 CHL1220 CHL1440 CHL1860
40,000 48,000 56,000 65,000 71,000 84,000 89,000 105,000 122,000 144,000 186,000
2 2 3 3 4 4 3 3 3 3 4
9,400 9,400 13,200 13,200 17,600 17,600 21,600 21,600 25,200 27,600 36,800
24 24 24 24 24 24 30 30 30 30 30
6.4 6.4 -
5.5 5.5 8.7 8.7 -
5.2 5.2 7.8 7.8 10.4 10.4 13.8 13.8 19.8 21.0 28.0
Drain FPT is 1-1/4" for all models. † (2) connections required.
12
Dimensions (in.) L
CHE Models 6 Fins Per Inch 3.4 2.6 1.8 83-3/32 3.4 2.6 1.8 83-3/32 3.0 3.9 2.7 105-5/32 3.0 3.9 2.7 105-5/32 4.7 5.2 3.6 135-7/32 4.7 5.2 3.6 135-7/32 6.9 7.8 135-13/32 6.9 7.8 135-13/32 9.9 7.8 135-13/32 10.5 8.4 142-1/2 14.0 11.2 185-1/2 CHL Models 4 Fins Per Inch 3.4 2.6 1.8 83-3/32 3.4 2.6 1.8 83-3/32 3.0 3.9 2.7 105-5/32 3.0 3.9 2.7 105-5/32 4.7 5.2 3.6 135-7/32 4.7 5.2 3.6 135-7/32 6.9 7.8 135-13/32 6.9 7.8 135-13/32 9.9 7.8 135-13/32 10.5 8.4 142-1/2 14.0 11.2 185-1/2
Connections (in.)1
Approx. Coil Ext. Net Wt. Suction Inlet Equal. (lbs.) ODF ODF ODF
H
D
40-11/32 40-11/32 40-11/32 40-11/32 40-11/32 40-11/32 50-5/16 50-5/16 55-13/16 55-13/16 56-1/4
29-1/2 29-1/2 29-1/2 29-1/2 29-1/2 29-1/2 41-3/32 41-3/32 41-3/32 41-3/32 41-3/32
1-1/8 1-1/8 1-3/8 1-3/8 1-3/8 1-3/8 1-3/8 1-5/8 1-3/8† 1-3/8 1-5/8
1-5/8 1-5/8 2-1/8 2-1/8 2-1/8 2-1/8 2-1/8 2-1/8 2-1/8† 2-5/8 2-5/8
1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4† 1/4 1/4
280 310 405 445 535 585 753 815 865 1,175 1,620
40-11/32 40-11/32 40-11/32 40-11/32 40-11/32 40-11/32 50-5/16 50-5/16 55-13/16 55-13/16 56-1/4
29-1/2 29-1/2 29-1/2 29-1/2 29-1/2 29-1/2 41-3/32 41-3/32 41-3/32 41-3/32 41-3/32
1-1/8 1-1/8 1-3/8 1-3/8 1-3/8 1-3/8 1-3/8 1-5/8 1-3/8† 1-3/8 1-5/8
1-5/8 1-5/8 2-1/8 2-1/8 2-1/8 2-1/8 2-1/8 2-1/8 2-1/8† 2-5/8 2-5/8
1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4† 1/4 1/4
277 306 400 440 528 578 744 805 854 1,160 1,600
Warehouse Unit Coolers Large Unit Coolers Hot Gas Defrost Models CHG/CHF offer the same benefits as air defrost and are ideal for warehouse cooler/freezer applications. Optional field or factoryinstalled hot gas defrost kits available. Capacity (BTUH)
Fan
CHG/CHF Model 10°F TD Qty. -20 SST
1 †
PSC Motor (Total FLA) 208230/1/60
CFM
Dimensions (in.)
Connections (in.)1
460/1/60
Dia. 208460/ 575/ (in.) Wired Wired 230/3/60 Wired Wired 3/60 3/60 1 ph. 3 ph.
L
H
D
1 ph. 3 ph.
CHG450 CHG550 CHG640 CHG740 CHG810 CHG950 CHG1020 CHG1200 CHG1390 CHG1650 CHG2120
45,000 55,000 64,000 74,000 81,000 95,000 102,000 120,000 139,000 165,000 212,000
2 2 3 3 4 4 3 3 3 3 4
9,000 9,000 12,600 12,600 16,800 16,800 20,700 20,700 24,300 26,550 35,400
24 24 24 24 24 24 30 30 30 30 30
6.4 6.4 -
5.5 5.5 8.7 8.7 -
5.2 5.2 7.8 7.8 10.4 10.4 13.8 13.8 19.8 21.0 28.0
3.4 3.4 -
CHF400 CHF480 CHF560 CHF650 CHF710 CHF840 CHF890 CHF1050 CHF1220 CHF1440 CHF1860
40,000 48,000 56,000 65,000 71,000 84,000 89,000 105,000 122,000 144,000 186,000
2 2 3 3 4 4 3 3 3 3 4
9,400 9,400 13,200 13,200 17,600 17,600 21,600 21,600 25,200 27,600 36,800
24 24 24 24 24 24 30 30 30 30 30
6.4 6.4 -
5.5 5.5 8.7 8.7 -
5.2 5.2 7.8 7.8 10.4 10.4 13.8 13.8 19.8 21.0 28.0
3.4 3.4 -
CHG Models 6 Fins Per Inch 2.6 1.8 83-3/32 40-11/32 2.6 1.8 83-3/32 40-11/32 3.0 3.9 2.7 105-5/32 40-11/32 3.0 3.9 2.7 105-5/32 40-11/32 4.7 5.2 3.6 135-7/32 40-11/32 4.7 5.2 3.6 135-7/32 40-11/32 6.9 7.8 135-13/32 50-5/16 6.9 7.8 135-13/32 50-5/16 9.9 7.8 135-13/32 55-13/16 - 10.5 8.4 142-1/2 55-13/16 - 14.0 11.2 185-1/2 56-1/4 CHF Models 4 Fins Per Inch 2.6 1.8 83-3/32 40-11/32 2.6 1.8 83-3/32 40-11/32 3.0 3.9 2.7 105-5/32 40-11/32 3.0 3.9 2.7 105-5/32 40-11/32 4.7 5.2 3.6 135-7/32 40-11/32 4.7 5.2 3.6 135-7/32 40-11/32 6.9 7.8 135-13/32 50-5/16 6.9 7.8 135-13/32 50-5/16 9.9 7.8 135-13/32 55-13/16 - 10.5 8.4 142-1/2 55-13/16 - 14.0 11.2 185-1/2 56-1/4
Coil Inlet ODF
Hot Hot Gas Ext. Suct. Gas Drain Equal. ODF ODF Side Pan Port Ref Conn
App. Net Wt. (lbs.)
29-1/2 29-1/2 29-1/2 29-1/2 29-1/2 29-1/2 41-3/32 41-3/32 41-3/32 41-3/32 41-3/32
1-1/8 1-5/8 1-1/8 1-5/8 1-3/8 2-1/8 1-3/8 2-1/8 1-3/8 2-1/8 1-3/8 2-1/8 1-3/8 2-1/8 1-5/8 2-1/8 1-3/8† 2-1/8† 1-3/8† 2-5/8† 1-3/8† 2-5/8†
1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4† 1/4† 1/4†
5/8 5/8 7/8 7/8 7/8 7/8 7/8 1-1/8 7/8† 7/8† 7/8†
1-1/8 1-1/8 1-1/8 1-1/8 1-1/8 1-1/8 1-3/8 1-3/8 1-3/8 1-5/8 1-5/8
280 310 405 445 535 585 753 815 865 1,175 1,620
29-1/2 29-1/2 29-1/2 29-1/2 29-1/2 29-1/2 41-3/32 41-3/32 41-3/32 41-3/32 41-3/32
1-1/8 1-5/8 1-1/8 1-5/8 1-3/8 2-1/8 1-3/8 2-1/8 1-3/8 2-1/8 1-3/8 2-1/8 1-3/8 2-1/8 1-5/8 2-1/8 1-3/8† 2-1/8† 1-3/8† 2-5/8† 1-3/8† 2-5/8†
1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4† 1/4† 1/4†
5/8 5/8 7/8 7/8 7/8 7/8 7/8 1-1/8 7/8† 7/8† 7/8†
1-1/8 1-1/8 1-1/8 1-1/8 1-1/8 1-1/8 1-3/8 1-3/8 1-3/8 1-5/8 1-5/8
277 306 400 440 528 578 744 805 854 1,160 1,600
Drain FPT is 1-1/4" for all models. (2) connections required.
What is Thermo-Flex™ coil design? Climate Control’s innovative coil design utilizes a new and unique approach to coil expansion that virtually eliminates the possibility of leaks at tube sheets and coil supports. Our engineers conceived the design after intense analysis of the cause of common coil failures. Through the use of accelerated test procedures and computer simulation, our engineers pinpointed the primary stress points of a coil during its operation. The Thermo-Flex™ coil design for the evaporator (U.S. Patent No. 5,584,340) allows the coil to ‘flex’ during periods of defrost which result in expansion of the coil surface. By eliminating the possibility of wear at critical stress areas, the integrity and longevity of the unit are dramatically increased. The result is a product which greatly enhances overall system reliability and reduces risk of costly refrigerant loss. To prove our claim, Climate Control offers a five-year limited guarantee against leaks at tube sheets and center supports for all medium profile and large unit cooler models.
13
Packaged Refrigeration Systems PRO3 Top Mount Packaged Refrigeration Systems Models PTN/PTT are an evaporator and condensing unit all in one package. This unit is designed to maximize storage area inside a cooler or freezer and is ideal for small- to medium-sized restaurant and convenience store application where holding temperature is the primary goal. Shaded Pole motors standard for both condensing unit and evaporator section, PSC motors optional for for both condensing unit and evaporator section, EC motors available for evaporator section only.
EASE OF INSTALLATION AND SERVICE
ENERGY EFFICIENT | ENVIRONMENTALLY FRIENDLY
• Installation takes a fraction of the time required for a split system: no piping or loose components to install, refrigerant is pre-charged at factory and a field superheat adjustment is not required (see installation manual for more information)
• Energy Solutions® energy-efficient motors from InterLink™ Commercial Refrigeration Parts: – PSC motors standard in both condensing unit and evaporator section – EC motors optional, but may be required in certain installations (evaporator section only)
• No drain line required for indoor units. Indoor models come with a condensate evaporation pan • Flexible design allows for multiple installation methods: optimized for indoor use, but outdoor models available with weatherhood installed. Outdoor models also come with: crankcase heater, drain line heater and fan-cycling for head pressure control • Maximizes storage area in a cooler or freezer: evaporator grill mounts flush on a standard 4 or a recessed in a 5-1/2" ceiling panel
• Reduced refrigerant charge: system uses as little as 10 percent* of refrigerant required for a comparable split system
RELIABLE | DURABLE • System is fully-assembled and quality-tested at the factory • Electronic control provides accurate temperature control
EASE OF USE
• Liquid-line filter drier (medium and large cabinet only)
• System is factory-assembled, evacuated, charged, run-tested and wired; no additional components or refrigerant charging required; most models come with a 26 power cord ready to plug-in
• Two-year parts warranty * Results may vary. Estimate based on a typical 25-foot refrigerant line.
• Controls preset for typical applications: +35° F for coolers, -10° F, for freezers and are easy to adjust (019L6 set for 0° F)
Performance Data Coolers - Air Defrost System Model PTN024H2 PTN029H2 PTN040H2 PT*047H2 PT*063H2 PT*072H2 PT*099H2 PT*128H2
Freezers - Electric Defrost Systems
90° F Ambient 35° F 38° F 2,630 2,740 3,170 3,290 4,380 4,500 5,150 5,480 6,910 7,340 7,890 8,330 10,850 11,730 14,030 15,010
Model PTN019L6 PT*021L6 PT*031L6 PT*044L6 PT*052L6 PT*069L6
0° F 2,640 2,860 4,500 6,260 7,470 9,670
90° F Ambient -10° F – 2,300 3,400 4,830 5,720 7,850
-20° F – 1,430 2,200 3,630 4,170 5,600
MEA Accepted
Electrical Data Model
Voltage
MCA
MOPD
PTN024H2A^ PTN029H2A^ PTN040H2A^ PT*047H2A^ PT*047H2B^ PT*063H2B^ PT*072H2B^ PT*099H2B^ PT*099H2C^ PT*128H2B^ PT*128H2C^ PTN019L6A^ PT*021L6A^ PT*021L6B^ PT*031L6B^ PT*044L6B^ PT*052L6B^ PT*052L6C^ PT*069L6B^ PT*069L6C^
115/1/60 115/1/60 115/1/60 115/1/60 208-230/1/60 208-230/1/60 208-230/1/60 208-230/1/60 208-230/3/60 208-230/1/60 208-230/3/60 115/1/60 115/1/60 208-230/1/60 208-230/1/60 208-230/1/60 208-230/1/60 208-230/3/60 208-230/1/60 208-230/3/60
10.2 10.6 11.7 16.9 8.6 11.6 10.9 17.1 15.4 20.3 14.8 13.0 14.5 7.6 13.8 15.9 18.1 12.2 23.8 15.9
15 15 15 20 15 15 15 20 20 30 20 20 20 15 15 20 20 15 30 20
*T For Outdoor, N for Indoor. ^ H for PSC, E for EC motor on evaporator section only.
14
Unit Amps 10.2 10.6 11.7 14.2 7.3 9.9 9.3 14.7 13.3 17.2 12.8 13.0 12.3 6.5 11.6 13.3 15.3 13.0 20.0 14.2
Evaporator CFM 340 340 340 350 350 550 500 875 875 825 825 340 350 350 550 520 900 900 875 875
Plug Supplied Yes Yes Yes Yes Yes 1 Yes 1 Yes 1 Yes 1 No No No Yes Yes Yes 1 Yes 1 Yes 1 Yes 1 No No No
Matching NEMA Receptacle 5-20R 5-20R 5-20R 5-20R 6-15R 6-15R 6-15R 6-20R – – – 5-20R 5-20R 6-15R 6-15R 6-20R 6-20R – – –
1 Plug Supplied on Indoor models only. 2 See technical bulletin for dimensions.
Cabinet Size2 Small Small Small Medium Medium Medium Medium Large Large Large Large Small Medium Medium Medium Medium Large Large Large Large
Approx. Net Weight (lbs.) 88 90 92 192 192 207 211 270 265 290 285 101 213 213 221 225 275 270 280 275
Packaged Refrigeration Systems PRO3 Side Mount Packaged Refrigeration Systems Model PST is an evaporator and condensing unit all in one package. This unit is optimized for
outdoor applications and is ideal for small- to medium-sized restaurant and convenience store applications where maximum airflow is essential for pulling down the temperature of foods or beverages. The Side Mount PRO3 is also available with electric defrost medium temperature models, ensuring maximum performance in storage applications slightly above freezing. PSC motors standard for both condensing unit and evaporator section, EC motors available for evaporator section only. EASE OF INSTALLATION AND SERVICE • Installation takes a fraction of the time required for a split system: refrigerant is pre-charged at factory, superheat adjustment is not required and unit slides into slots in standard walk-in panel (see installation manual for more information) • Designed for simple serviceability: the condensing unit section’s cabinet door can be quickly removed; in addition, the electrical box is located outside the cabinet for easy access
• Electric defrost in medium temperature models, allowing for maximum performance in storage applications just above 32°F • Fan-cycling for head pressure control • Crankcase heater • Drain line heater
RELIABLE | DURABLE
• Flexible design allows for multiple installation methods: Optimized for outdoor use, but can be used indoors as well (with drain connection)
• System is fully-assembled and quality-tested at the factory
• Lifting lugs and hanging brackets in evaporating section allow for easy installation
• Liquid-line filter drier
EASE OF USE
• Electronic microprocessor control provides accurate temperature control • Two-year parts warranty
ENVIRONMENTALLY FRIENDLY
• System is factory-assembled, evacuated, charged, run-tested and wired; no additional components required • Controls preset for typical applications: +38° F for high temp. coolers, +35° F for medium temp. coolers, -10° F for freezers and are easy to adjust
PERFORMANCE • Maximized airflow: evaporator placement in walk-in box with pullthrough fans – Suitable for temperature pull-down and holding temperature • Increased condenser capacity, by avoiding compressor heat – Improved tolerance in high-ambient conditions
• Energy Solutions® energy-efficient motors from InterLink™ Commercial Refrigeration Parts: – PSC motors standard in both condensing unit and evaporator section – EC motors optional, but may be required in certain installations (evaporator section only) • Reduced refrigerant charge: the PRO3 Side Mount packaged refrigeration system can use as little as 10-15 percent* of refrigerant required for a comparable split system *Results may vary. Estimate based on a typical a typical 100-foot refrigerant line length.
Performance Data
MEA Accepted
Coolers - Air Defrost System Model PST070H6B^ PST090H6B^ PST131H6B^ PST147H6B^
Coolers - Electric Defrost System
90° F Ambient 35° F 38° F 6,860 7,198 8,928 9,363 12,859 13,540 14,545 15,245
Model PST066M6B^ PST086M6B^ PST124M6B^ PST141M6B^
90° F Ambient 35° F 6,860 8,928 12,859 14,545
Freezers - Electric Defrost System Model PST034L6B^ PST051L6B^ PST057L6B^ PST077L6B^
90° F Ambient 0° F -10° F -20° F 5,031 3,651 2,395 6,922 5,428 3,943 7,994 6,079 4,153 10,602 8,179 6,030
Electrical Data Model PST070H6B^ PST090H6B^ PST131H6B^ PST147H6B^ PST066M6B^ PST086M6B^ PST124M6B^ PST141M6B^ PST034L6B^ PST051L6B^ PST057L6B^ PST077L6B^
Voltage 208-230/1/60 208-230/1/60 208-230/1/60 208-230/1/60 208-230/1/60 208-230/1/60 208-230/1/60 208-230/1/60 208-230/1/60 208-230/1/60 208-230/1/60 208-230/1/60
MCA 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 20.7
MOPD 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 35.0
Evaporator CFM 625 625 1,350 1,350 625 625 1,350 1,350 625 625 1,350 1,350
Cabinet Size¹ Small Small Large Large Small Small Large Large Small Small Large Large
Approx. Net Weight (lbs.) 260 265 320 325 260 265 320 325 260 265 320 325
^ H for PSC, E for EC motor on evaporator section only. 1 See technical bulletin for dimensions.
15
Condensing Units 1/2 - 5 HP Indoor/Outdoor Condensing Units with Hermetic Compressors Model CH
condensing units are ideal for convenience store, restaurant and other commercial applications. The CH model condensing units feature a hermetic refrigeration compressor with oversized HyperCore™ microchannel condenser. Also, the CH Series condensing units have a shut off valve in the discharge line of the hermetic compressor. PSC motors come standard to help you save energy. UL listed for US and Canada. Available with factory installed Smart Defrost Kit™ (SDK) system and Variable Speed EC (VSEC) motor with Orbus™ Controller.
HyperCore
TM
microchannel coil technology
Variable Speed EC (VSEC) motors with Orbus™ Controller by InterLink™ VSEC motors by InterLink™ with the proprietary Orbus™ Controller are available as an option on 1/2-6 HP air-cooled condensing units from Climate Control. Choosing this option saves energy and reduces costs for the end user by controlling the speed of motors in response to loads. To achieve an optimal system that is both energy efficient and environmentally friendly, choose the following options for your unit: VSEC motors with Orbus™ Controller, factory-installed Smart Defrost Kit™ and a variety of compressor options, including efficient scroll, hermetic and semi-hermetic compressor. These options provide unmatched energy efficiency — the perfect solution for applications where energy savings is essential for success.
CH Series Indoor or Outdoor Installation, Hermetic Compressors (1/2 - 5 HP) CH Model CH*005H6 CH*009H6 CH*010H6† CH*015H6 CH*025H6 CH*032H6 CH*040H6 CH*050H6 CH*005X6 CH*008X6 CH*009X6 CH*010X6† CH*015X6 CH*020X6 CH*025X6 CH*030X6 CH*032X6 CH*040X6 CH*050X6 CH*011L6 CH*014L6 CH*019L6 CH*025L6 CH*031L6 CH*005H2 CH*008H2 CH*010H2 CH*015H2 CH*020H2 CH*029M2 CH*030H2 CH*040H2 CH*050H2
Compressor Refrigerant RST45C1E RST64C1E RS70C1E CS10K6E CS14K6E CS20K6E CS27K6E2 CS33K6E2 RST45C1E RST55C1E RST64C1E RS70C1E CS10K6E CS12K6E CS14K6E CS18K6E CS20K6E CS27K6E CS33K6E CF04K6E CF06K6E CF06K6E CF09K6E CF12K6E ART82C1 RS64C2 RS70C1 CR18KQ CR24KQ CR37KQ CR37KQ CR53KQ CRN-0500
Suction Temp.
High Temp R-404A/507
35°F
Extended Temp R-404A/507
25°F
Low Temp R-404A/507
-10°F
Medium & High Temp R-22
25°F
* = T for Outdoor, N for Indoor, S for Beacon II™ † = RS compressor not suitable for R-507 ^ Power supplied by customer 1 Minimum Circuit Amps - Air Defrost Type Unit 2 230 volt only
16
Unit MCA1 Capacity (BTUH) Connections (ID) 95° F Ambient Liquid Suction 208-230/1 208-230/3 460/3 7,790 11,080 11,960 18,400 23,030 37,110 45,670 50,060 5,970 7,070 8,420 8,850 13,960 16,000 17,490 25,490 27,890 37,270 41,000 4,920 7,750 8,750 12,000 14,360 4,870 7,740 8,150 12,210 16,910 22,780 28,090 38,840 44,050
3/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2 3/8 3/8 3/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 3/8 3/8 3/8 3/8 1/2 3/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2
1/2 5/8 5/8 5/8 7/8 7/8 1-1/8 1-1/8 1/2 1/2 5/8 5/8 5/8 7/8 7/8 7/8 7/8 1-1/8 1-1/8 5/8 5/8 5/8 7/8 7/8 1/2 1/2 5/8 5/8 7/8 7/8 7/8 1-1/8 1-1/8
15.0 15.0 15.0 15.0 20.0 25.9 33.1 41.2 15.0 15.0 15.0 15.0 15.0 15.0 15.0 21.0 24.0 30.3 38.0 15.0 15.0 15.0 20.0 22.3 15.0 15.0 15.0 15.0 20.0 21.8 24.3 36.0 42.0
– – 15.0 15.0 15.0 20.2 21.1 24.2 – – – 15.0 15.0 15.0 15.0 15.0 20.0 20.7 24.5 15.0 15.0 15.0 15.0 15.0 – – 15.0 15.0 15.0 15.0 30.0 23.9 28.0
– – – – – – – – – – – – – – 15.0 15.0 15.0 15.0 15.0 – – – – 15.0 – – – 15.0 15.0 15.0 15.0 15.0 15.0
Dimensions D (In.)
W (In.)
H (In.)
Net Wt. Lbs.
28-1/4 28-1/4 28-1/4 28-1/4 28-1/4 30-1/4 30-1/4 30-1/4 28-1/4 28-1/4 28-1/4 28-1/4 28-1/4 28-1/4 28-1/4 30-1/4 30-1/4 30-1/4 30-1/4 28-1/4 28-1/4 28-1/4 28-1/4 28-1/4 28-1/4 28-1/4 28-1/4 28-1/4 28-1/4 28-1/4 30-1/4 30-1/4 30-1/4
23-3/4 23-3/4 23-3/4 37-3/4 37-3/4 42-1/2 42-1/2 42-1/2 23-3/4 23-3/4 23-3/4 23-3/4 37-3/4 37-3/4 37-3/4 42-1/2 42-1/2 42-1/2 42-1/2 23-3/4 23-3/4 37-3/4 37-3/4 37-3/4 23-3/4 23-3/4 23-3/4 37-3/4 37-3/4 37-3/4 42-1/2 42-1/2 42-1/2
17-1/4 17-1/4 17-1/4 17-1/4 17-1/4 29-3/4 29-3/4 29-3/4 17-1/2 17-1/2 17-1/2 17-1/4 17-1/4 17-1/4 17-1/4 29-3/4 29-3/4 29-3/4 29-3/4 17-1/4 17-1/4 17-1/4 17-1/4 19-3/4 17-1/4 17-1/4 17-1/4 17-1/4 17-1/4 19-1/4 29-3/4 29-3/4 29-3/4
135 144 138 193 208 275 281 313 135 135 144 138 193 203 208 290 275 281 313 139 170 200 222 223 135 141 136 189 193 214 281 299 310
Condensing Units 2 - 6 HP Indoor/Outdoor Condensing Units with Scroll® Compressors Model CZ features a complete line of Copeland’s Scroll® compressors. These condensing
units have an oversized HyperCore™ microchannel condenser which allows units to operate in high ambient for 40° F suction temperature and below. PSC motors come standard to help you save energy. UL listed for US and Canada. Available with factory installed Smart Defrost Kit™(SDK) system and Variable Speed EC (VSEC) motor with Orbus™ Controller.
HyperCore
TM
microchannel coil technology
CZ Series Indoor or Outdoor Installation, Scroll® Compressors (2-6 HP) CZ Model CZ*020M6 CZ*025M6 CZ*030M6 CZ*035M6 CZ*045M6 CZ*055M6 CZ*060M6 CZ*020L6 CZ*025L6 CZ*030L6 CZ*035L6 CZ*045L6 CZ*055L6 CZ*060L6
Compressor Refrigerant ZS15K4E ZS19K4E ZS21K4E ZS26K4E ZS30K4E ZS38K4E ZS45K4E ZF06K4E ZF08K4E ZF09K4E ZF11K4E ZF13K4E ZF15K4E ZF18K4E
Suction Temp.
Medium Temp. R-404A/ 507
25°F
Low Temp. R-404A/ 507
-10°F
Capacity (BTUH) 95°F Ambient 18,930 22,490 27,270 32,820 38,230 45,160 52,340 9,540 11,850 13,200 15,860 19,490 23,820 28,970
Connections (in.) Liquid IDS 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2
Suction IDS 7/8 7/8 7/8 7/8 1-1/8 1-1/8 1-1/8 7/8 7/8 7/8 7/8 1-1/8 1-1/8 1-1/8
Unit MCA1 208230/1 20 20 22 27 34 40 – 20 20 20 24 34 40 –
208230/3 15 15 20 20 20 28 30 15 15 15 20 20 28 30
Dimensions (in.) 460/3
L
H
D
Approx. Net Wt. (lbs.)
15 15 15 15 15 15 15 15 15 15 15 15 15 15
37-3/4 37-3/4 42-1/2 42-1/2 42-1/2 42-1/2 42-1/2 37-3/4 37-3/4 37-3/4 37-3/4 42-1/2 42-1/2 42-1/2
19-3/4 19-3/4 29-3/4 29-3/4 29-3/4 29-3/4 29-3/4 19-3/4 19-3/4 19-3/4 19-3/4 29-3/4 29-3/4 29-3/4
28-1/4 28-1/4 30-1/4 30-1/4 30-1/4 30-1/4 30-1/4 28-1/4 28-1/4 28-1/4 28-1/4 30-1/4 30-1/4 30-1/4
209 218 287 290 317 317 317 209 218 218 217 307 313 317
* = T for Outdoor, N for Indoor, S for Beacon II™ 1 Minimum Circuit Amps - Air Defrost Type Unit NOTE: The ZF compressor comes with liquid injection. For R-22 model capacity information, see product bulletin.
17
Condensing Units 1/2 - 5 HP Indoor/Outdoor Condensing Units with Semi-Hermetic Compressors
HyperCore
TM
microchannel coil technology
Model CS
condensing units are ideal for convenience store, restaurant and other commercial applications. The units feature a semi-hermetic refrigeration compressor, which is spring-mounted with vibration eliminators on all 1-1/2 to 6 HP (1/2 to 1 HP compressors are rigid mounted and have a discharge loop). Also, these condensing units come standard with an oversized HyperCore™ microchannel coil technology condenser that works in high ambients, encapsulated auto-reset high pressure controls to eliminate leaks, pre-painted steel cabinet for superior strength and corrosion protection, and suction and discharge service valves. PSC motors come standard to help you save energy. UL listed for US and Canada. Available with factory installed Smart Defrost Kit™(SDK) sytem and Variable Speed EC (VSEC) motor with Orbus™ Controller.
CS Series Indoor or Outdoor Installation, Semi-Hermetic Compressors (1/2-5 HP) CS Model CS*005H2 CS*008H2 CS*008M2 CS*010H2 CS*010M2 CS*015H2 CS*020H2 CS*020M2 CS*021M2 CS*029M2 CS*030H2 CS*040H2 CS*050H2 CS*050M2 CS*005M6 CS*010M6 CS*020M6 CS*021M6 CS*030M6 CS*040M6 CS*005L6 CS*008L6 CS*010L6 CS*015L6 CS*020L6 CS*021L6 CS*030L6 CS*030E6 CS*040L6
Compressor HAG-0050 KAN-0075 KAE-0075 KAR-0100 KAM-0100 KAG-0150 ERA-0200 KAK-0200 ERC-0200 ERF-0310 ERF-0310 NRB-0400 NRA-0500 NRM-0500 HAJ-005E KAR-010E KAK-020E ERC-021E ERF-031E NRB-040E KAN-005E KAM-007E KAJ-010E KAL-015E EAD-020E EAV-021E LAH-032E LAC-032E NRD-040E^ NRD-032E^^
Refrigerant
Suction Temp.
Medium & High Temp R-22
25°F
Medium Temp R-404A/507
25°F
Low Temp R-404A/507
-10°F
Capacity (BTUH) 95° F Ambient 4,280 6,630 7,510 9,260 9,580 12,230 13,700 16,530 17,640 24,720 26,800 37,830 43,310 51,590 5,210 9,140 16,240 18,850 29,690 39,240 2,580 4,320 5,790 8,920 9,870 11,280 16,930 15,700††
Liquid (IDS) 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 1/2 3/8 3/8 3/8 3/8 1/2 1/2 3/8 3/8 3/8 3/8 3/8 3/8 1/2 1/2
Suction (IDS) 1/2 5/8 5/8 5/8 5/8 7/8 7/8 7/8 7/8 7/8 7/8 1-1/8 1-1/8 1-1/8 1/2 5/8 7/8 7/8 7/8 1-1/8 1/2 5/8 5/8 7/8 7/8 7/8 7/8 7/8
208230/1 15 15 15 15 15 15 15† 15 15† 21† 23† – – – 15 15 15 – 23† – 15 15 15 15 15† 20 20† 20†
208230/3 15 15 15 15 15 15 15 15 15 15 20 28 25 31 – 15 15 15 20 28 15 15 15 15 15 15 20 15
22,530
1/2
1-1/8
35†
22
* = T for Outdoor, N for Indoor, S for Beacon II™ ^ NRD1-040E Compressor is Single Phase & uses R-404A only. ^^ Uses R-404A & 507 in 3 phase model.
18
Connections (in.)
Unit MCA1
Dimensions (in.) 460/3
L
H
D
Approx. Net Wt. (lbs.)
– – – – – 15 15 – 15 15 15 15 15 15 – – – 15 15 15 – – – – – 15 15 15
23-3/4 23-3/4 23-3/4 23-3/4 23-3/4 37-3/4 37-3/4 37-3/4 37-3/4 37-3/4 42-1/2 42-1/2 42-1/2 42-1/2 23-3/4 23-3/4 37-3/4 37-3/4 42-1/2 42-1/2 23-3/4 23-3/4 23-3/4 37-3/4 37-3/4 37-3/4 37-3/4 37-3/4
17-1/4 17-1/4 17-1/4 17-1/4 17-1/4 17-1/4 17-1/4 17-1/4 17-1/4 19-3/4 29-3/4 29-3/4 29-3/4 29-3/4 17-1/4 17-1/4 17-1/4 17-1/4 29-3/4 29-3/4 17-1/4 17-1/4 17-1/4 17-1/4 17-1/4 17-1/4 19-3/4 19-3/4
28-1/4 28-1/4 28-1/4 28-1/4 28-1/4 28-1/4 28-1/4 28-1/4 28-1/4 28-1/4 30-1/4 30-1/4 30-1/4 30-1/4 28-1/4 28-1/4 28-1/4 28-1/4 30-1/4 30-1/4 28-1/4 28-1/4 28-1/4 28-1/4 28-1/4 28-1/4 28-1/4 28-1/4
161 180 180 175 178 221 293 189 301 391 385 460 462 462 161 178 189 301 397 460 172 172 178 225 291 301 357 391
15
42-1/2
29-3/4
30-1/4
457
1 Minimum Circuit Amps - Air Defrost Type Unit † Units are 230 volt † † Rated at -20˚ F
Condensing Units 3-22 HP Indoor or Outdoor Condensing Units with Discus® or Scroll® Compressors Models CD/CZ 3-22 HP condensing unit’s enhanced grill design gives up to 40% more free-air area
than before and its vertical receiver needs less refrigerant to ensure a solid column of liquid reaches the expansion valve. Fan motors and serviceable components are accessible to the front grill for quick service and the sight glass is conveniently placed so that charging is quick, easy and accurate. Thorough cleaning of the coil is easier because the unit’s top is one piece and lighter for easy removal. A liquid base valve and suction service tap is placed on the outside of the cabinet for easy pump-downs and quick diagnosis. The footprint is smaller for easy jobsite placement. These condensing units utilize the Floating Tube™ coil design, which eliminates tube-sheet leaks, allowing Climate Control to offer you a 5-year warranty (including labor and refrigerant) against tube-sheet leaks. PSC motors come standard to help you save energy.
CDT/CDN/CDS Standard Discus® Models CD Model
Compressor
CD*0500H2 CD*0501H2 CD*0750H2 CD*0751H2 CD*0800H2 CD*1000H2 CD*1200H2 CD*1500H2 CD*0500M6 CD*0501M6 CD*0750M6 CD*0751M6 CD*0800M6 CD*1000M6 CD*1200M6 CD*1500M6 CD*0300L6 CD*0400L6 CD*0600L6 CD*0601L6 CD*0750L6 CD*0900L6 CD*1000L6 CD*1200L6 CD*1500L6 CD*2200L6 CD*0300L2 CD*0400L2 CD*0600L2 CD*0601L2 CD*0750L2 CD*0900L2 CD*1000L2 CD*1200L2 CD*1500L2 CD*2200L2
2DC3R53KE 2DD3R63KE 2DL3R78KE 2DA3R89KE 3DA3R10ME 3DB3R12ME 3DF3R15ME 3DS3R17ME 2DC3R53KE 2DD3R63KE 2DL3R78KE 2DA3R89KE 3DA3R10ME 3DB3R12ME 3DF3R15ME 3DS3R17ME 2DF3F16KE 2DL3F20KE 2DB3F25KE 3DA3F28KE 3DB3F33KE 3DF3F40KE 3DS3F46KE 4DA3F47KE 4DL3F63KE 4DT3F76KE 2DF3F16KE 2DL3F20KE 2DB3F25KE 3DA3F28KE 3DB3F33KE 3DF3F40KE 3DS3F46KE 4DA3F47KE 4DL3F63KE 4DT3F76KE
Refrigerant
Suction Temp
Medium & High Temp R-22
25ºF
Medium Temp R-404A/ R-507
20ºF
Low Temp R-404A/ R-507
-10ºF
Low Temp R-22
-10ºF
BTUH 95˚F Amb. 43,380 49,380 61,860 71,930 88,450 103,250 115,210 134,780 39,280 45,530 56,000 68,060 80,170 93,930 111,940 128,610 25,320 29,620 35,160 38,920 45,630 59,280 64,870 70,880 89,380 103,010 22,160 25,870 31,180 34,760 42,060 53,290 57,230 63,600 79,760 92,430
Air Defrost Min. Circuit Amp 208-230/ 460/ 3/60 3/60 27.7 15.0 27.7 15.0 38.1 20.0 41.3 20.0 51.4 26.2 54.3 26.2 59.4 30.2 75.7 36.9 27.7 15.0 27.7 15.0 38.1 20.0 41.3 20.0 51.4 26.2 54.3 26.2 59.4 30.2 75.7 36.9 20.6 15.0 32.2 15.0 34.4 20.0 32.7 20.0 37.2 20.0 46.9 22.6 51.9 24.6 59.9 30.0 67.8 33.9 80.9 40.5 20.6 15.0 32.2 15.0 34.4 20.0 32.7 20.0 37.2 20.0 46.9 22.6 51.9 24.6 59.9 30.0 67.8 33.9 80.9 40.5
Connections (in.)
Dimensions (in.)
Liquid
Suction
L
H
D
Approx. Net Wt. (lbs.)
1/2 1/2 1/2 5/8 5/8 5/8 5/8 7/8 1/2 1/2 1/2 5/8 5/8 5/8 5/8 7/8 1/2 1/2 1/2 1/2 1/2 5/8 5/8 7/8 7/8 7/8 1/2 1/2 1/2 1/2 1/2 5/8 5/8 7/8 7/8 7/8
1-1/8 1-1/8 1-1/8 1-3/8 1-3/8 1-3/8 1-3/8 1-5/8 1-1/8 1-1/8 1-1/8 1-3/8 1-3/8 1-3/8 1-3/8 1-5/8 1-1/8 1-1/8 1-1/8 1-1/8 1-1/8 1-3/8 1-3/8 1-5/8 1-5/8 1-5/8 1-1/8 1-1/8 1-1/8 1-1/8 1-1/8 1-3/8 1-3/8 1-5/8 1-5/8 1-5/8
36-3/4 36-3/4 36-3/4 36-3/4 36-3/4 36-3/4 36-3/4 41-3/4 36-3/4 36-3/4 36-3/4 36-3/4 36-3/4 36-3/4 36-3/4 41-3/4 36-3/4 36-3/4 36-3/4 36-3/4 36-3/4 36-3/4 36-3/4 41-3/4 41-3/4 41-3/4 36-3/4 36-3/4 36-3/4 36-3/4 36-3/4 36-3/4 36-3/4 41-3/4 41-3/4 41-3/4
39-1/4 39-1/4 39-1/4 39-1/4 39-1/4 39-1/4 39-1/4 48-3/4 39-1/4 39-1/4 39-1/4 39-1/4 39-1/4 39-1/4 39-1/4 48-3/4 39-1/4 39-1/4 39-1/4 39-1/4 39-1/4 39-1/4 39-1/4 48-3/4 48-3/4 48-3/4 39-1/4 39-1/4 39-1/4 39-1/4 39-1/4 39-1/4 39-1/4 48-3/4 48-3/4 48-3/4
51-3/4 51-3/4 51-3/4 63-3/4 63-3/4 63-3/4 63-3/4 75-1/8 51-3/4 51-3/4 51-3/4 63-3/4 63-3/4 63-3/4 63-3/4 75-1/8 51-3/4 51-3/4 51-3/4 51-3/4 51-3/4 63-3/4 63-3/4 75-1/8 75-1/8 75-1/8 51-3/4 51-3/4 51-3/4 51-3/4 51-3/4 63-3/4 63-3/4 75-1/8 75-1/8 75-1/8
751 751 761 985 1,020 1,045 1,065 1,182 751 751 761 985 1,020 1,045 1,065 1,182 737 741 751 781 805 1,030 1,035 1,199 1,234 1,224 737 741 751 781 805 1,030 1,035 1,199 1,234 1,224
CZT/CZN/CZS Scroll® Models CZ Model
Compressor
CZ*0650M6 CZ*0700M6 CZ*0750M6 CZ*0860M6 CZ*1000M6 CZ*1401M6 CZ*0750L6 CZ*1000L6 CZ*1300L6 CZ*1500L6 CZ*0750L2 CZ*1000L2 CZ*1300L2 CZ*1500L2
ZB50KCE ZB58KCE ZB66KCE ZB76KCE ZS92K4E ZS11M4E ZF24K4E ZF33K4E ZF40K4E ZF48K4E ZF24K4E ZF33K4E ZF40K4E ZF48K4E
Refrigerant
Suction Temp
High Temp R-404A
25ºF
Low Temp R-404A/ R-507
-10ºF
Low Temp R-22
-10ºF
*= T for Outdoors, N for Indoors, S for Beacon II™
BTUH 95˚F Amb. 58,130 69,460 80,250 90,090 108,200 128,920 32,650 45,630 57,900 65,370 30,610 42,940 53,530 60,860
Air Defrost Min. Circuit Amp 208-230/ 460/ 3/60 3/60 34.8 18.7 39.9 22.2 39.1 23.4 51.9 23.4 64.7 31.8 76.1 36.0 36.4 19.5 51.6 25.5 64.7 33.4 67.1 31.0 36.4 19.5 51.6 25.5 64.7 33.4 67.1 31.0
Connections (in.)
Dimensions (in.)
Liquid
Suction
L
H
D
Approx. Net Wt. (lbs.)
1/2 5/8 5/8 5/8 5/8 7/8 1/2 1/2 5/8 5/8 1/2 1/2 5/8 5/8
1-1/8 1-3/8 1-3/8 1-3/8 1-3/8 1-5/8 1-1/8 1-1/8 1-3/8 1-3/8 1-1/8 1-1/8 1-3/8 1-3/8
36-3/4 36-3/4 36-3/4 36-3/4 36-3/4 41-3/4 36-3/4 36-3/4 36-3/4 36-3/4 36-3/4 36-3/4 36-3/4 36-3/4
39-1/4 39-1/4 39-1/4 39-1/4 39-1/4 48-3/4 39-1/4 39-1/4 39-1/4 39-1/4 39-1/4 39-1/4 39-1/4 39-1/4
51-3/4 63-3/4 63-3/4 63-3/4 63-3/4 75-1/8 51-3/4 51-3/4 63-3/4 63-3/4 51-3/4 51-3/4 63-3/4 63-3/4
574 800 813 818 908 1235 671 671 910 891 671 671 910 891
19
Condensing Units 20 - 40 HP Outdoor Condensing Units with Discus® Compressors Model CDH outdoor Discus® condensing unit features the Floating Tube™ coil design.
The CDH features a high efficiency Copeland Discus® compressor. The electrical controls including compressor contactor and optional defrost control are located in an easily accessible control box with a hinged cover. UL listed for US and Canada.
CDH Discus® Compressor Model CDH Model
Compressor
CDH^2000D6 CDH^2500D6 CDH^2600D6 CDH^3000D6 CDH^3500D6 CDH^4000D6 CDH^2000D6 CDH^2500D6 CDH^2600D6 CDH^3000D6 CDH^3500D6 CDH^4000D6 CDH^2700L6 CDH^3000L6 CDH^3100L6
4DA3R18ME 4DH3R22ME 4DH3R22ME 4DJ3R28M3 6DH3R35ME 6DJ3R40ME 4DA3R18ME 4DH3R22ME 4DH3R22ME 4DJ3R28M3 6DH3R35ME 6DJ3R40ME 6DL3F93KE 6DT3F11ME 6DT3F11M3
Refrigerant
Suction Temp
Medium Temp R-22
25ºF
Medium Temp R-404A /R-507
25ºF
Low Temp R-404A /R-507
-10ºF
BTUH 95˚F Amb. 143,470 190,910 197,260 225,520 280,600 322,590 148,750 191,910 200,370 231,280 281,570 325,470 134,870 146,440 153,480
Min. Circuit Amp 208-230/ 3/60 87.9 105.3 109.7 123.0 137.8 176.3* 87.9 105.3 109.7 123.0 137.8 176.3* 103.7 120.4 124.8
460/ 3/60 43.9 52.7 54.9 61.5 68.9 88.1 43.9 52.7 54.9 61.5 68.9 88.1 51.9 60.2 62.4
Connections (in.)
Dimensions (in.)
Liquid
Suction
L
H
D
Approx. Net Wt. (lbs.)
7/8 1-1/8 1-1/8 1-1/8 1-1/8 1-1/8 7/8 1-1/8 1-1/8 1-1/8 1-1/8 1-1/8 1-1/8 1-1/8 1-1/8
1-5/8 2-1/8 2-1/8 2-1/8 2-1/8 2-1/8 1-5/8 2-1/8 2-1/8 2-1/8 2-1/8 2-1/8 2-1/8 2-1/8 2-1/8
102-1/2 102-1/2 132-1/2 132-1/2 132-1/2 132-1/2 102-1/2 102-1/2 132-1/2 132-1/2 132-1/2 132-1/2 102-1/2 102-1/2 132-1/2
48-3/4 48-3/4 48-3/4 48-3/4 48-3/4 48-3/4 48-3/4 48-3/4 48-3/4 48-3/4 48-3/4 48-3/4 48-3/4 48-3/4 48-3/4
42-1/4 42-1/4 42-1/4 42-1/4 42-1/4 42-1/4 42-1/4 42-1/4 42-1/4 42-1/4 42-1/4 42-1/4 42-1/4 42-1/4 42-1/4
1,131 1,206 1,362 1,372 1,492 1,542 1,131 1,206 1,362 1,372 1,492 1,542 1,206 1,406 1,452
* 230/3 ^ S for Beacon II™ models NOTE: Consult technical bulletin for R-22 ratings. Demand cooling needs to be specified for use with L6 R-22 models.
20
Condensing Units Dual-Compressor Outdoor Condensing Units (24–80 HP) Models CDD condensing units are designed for use in commercial refrigerated warehouse and light industrial applications. The units utilize the Floating Tube™ coil design, offering reliabilty against tube sheet and center support leaks. The CDD consists of two independent refrigeration circuits in a single housing, which can reduce space requirements as well as installation and rigging costs. Standard models are available in even horsepower configurations from 24 to 80 horsepower; however, unequal horsepower and other customer features can be designed to suit the application.
Design Features • • • •
Configurable with adjustible head pressure control systems Generous amount of clearance under the condenser section of the unit allows for ease of service Highly customizable to meet you needs All common serviceable controls are located in a separate electrical compartment from the main electrical box; no need to disconnect power supply • Parallel piped models are also available preconfigured with additional standard features
CDD Compressor Model CDD Model
Compressor
CDD3000H2 CDD4000H2 CDD5000H2 CDD5200H2 CDD6000H2 CDD7000H2 CDD7010H2 CDD8000H2 CDD3000M6 CDD4000M6 CDD5000M6 CDD5200M6 CDD6000M6 CDD7000M6 CDD8000M6 CDD3000C6 CDD4000C6 CDD5000C6 CDD6000C6 CDD7000C6 CDD8000C6 CDD2400L6 CDD3000L6 CDD4400L6 CDD5400L6 CDD6000L6 CDD2400L61 CDD3000L61 CDD4400L61 CDD5400L61 CDD6000L61
3DS3R17ME 4DA3R18ME 4DH3R22ME 4DH3R22ME 4DJ3R28ME 6DH3R35ME 6DG3R37ME 6DJ3R40ME 3DS3R17ME 4DA3R18ME 4DH3R22ME 4DH3R22ME 4DJ3R28ME 6DH3R35ME 6DJ3R40ME 3DS3R17ME 4DA3R18ME 4DH3R22ME 4DJ3R28ME 6DH3R35ME 6DJ3R40ME 4DA3F47KE 4DL3F63KE 4DT3F76KE 6DL3F93KE 6DT3F11ME 4DA3F47KE 4DL3F63KE 4DT3F76KE 6DL3F93KE 6DT3F11ME
Refrig.
Suction Temp
High Temp R-22
25° F
Medium Temp R404A /507
25° F
Comm. Temp R404A /507
10° F
Low Temp R404A /507
-10° F
Low Temp R-22
-10° F
BTUH 95° F Amb. 267,000 279,800 365,800 373,600 439,800 563,200 590,800 652,600 282,800 295,600 370,800 381,600 459,800 585,200 677,200 218,400 223,400 282,000 351,000 447,800 522,200 139,000 176,200 208,600 261,800 294,400 125,000 158,400 187,800 232,200 277,000
Air Defrost Min. Circuit Amp* 230/3/60 460/3/60 136.4 66.6 150.4 75.2 181.9 90.9 193.9 96.9 217.8 108.9 258.3 129.2 294.4 147.2 327.6 163.8 136.4 66.6 150.4 75.2 181.9 90.9 193.9 96.9 217.8 108.9 258.3 129.2 327.6 163.8 136.4 66.6 150.4 75.2 181.9 90.9 217.8 108.9 258.3 129.2 327.6 163.8 108.0 54.0 122.2 61.1 145.8 72.9 179.0 89.5 221.0 110.5 108.0 54.0 122.2 61.1 145.8 72.9 179.0 89.5 221.0 110.5
Connections (in.) Liquid Suction 7/8 1-5/8 7/8 1-5/8 1-1/8 2-1/8 1-1/8 2-1/8 1-1/8 2-1/8 1-1/8 2-1/8 1-1/8 2-1/8 1-1/8 2-1/8 7/8 1-5/8 7/8 1-5/8 1-1/8 2-1/8 1-1/8 2-1/8 1-1/8 2-1/8 1-1/8 2-1/8 1-1/8 2-1/8 7/8 1-5/8 7/8 1-5/8 1-1/8 2-1/8 1-1/8 2-1/8 1-1/8 2-1/8 1-1/8 2-1/8 7/8 1-5/8 7/8 1-5/8 7/8 2-1/8 1-1/8 2-1/8 1-1/8 2-1/8 7/8 1-5/8 7/8 1-5/8 7/8 2-1/8 1-1/8 2-1/8 1-1/8 2-1/8
Dimensions (in.) L H D 151 61 88 151 61 88 151 61 88 179 61 88 179 61 88 233 61 88 233 61 88 233 61 88 151 61 88 151 61 88 151 61 88 179 61 88 179 61 88 233 61 88 233 61 88 151 61 88 151 61 88 151 61 88 179 61 88 233 61 88 233 61 88 151 61 88 151 61 88 151 61 88 151 61 88 179 61 88 151 61 88 151 61 88 151 61 88 151 61 88 179 61 88
Approx. Net Wt. (lbs.) 3,160 3,160 3,230 3,520 3,720 4,320 4,320 4,760 3,160 3,160 3,230 3,520 3,720 4,320 4,760 3,160 3,160 3,230 3,720 4,320 4,760 3,000 3,000 3,000 3,340 3,770 3,000 3,000 3,000 3,340 3,770
* MCA based on remote loads and one contactor 1 Must be ordered with demand cooling
21
Condensing Units 1/2 - 6 HP Remote Water-Cooled Condensing Units with Hermetic or Scroll® Compressors Models HWN/ZWN are water-cooled hermetic and Scroll® condensing units from 1/2 to 6 HP. Condensing units’ component selection, location, base and unit dimensions are all optimized for easy field replacements or in new installations where space is limited. Extra space is provided inside the electrical box for easy servicing. The area is large enough to accommodate circuit breakers, compressor contactors, time clocks and all start components in one enclosure. Standard features include compressor isolations valves that enable services technicians to isolate the compressor for service. Also standard is the extra capacity receiver which provides total refrigerant pump down. Ideal for units requiring long line runs. These units are available with Copeland hermetic or Scroll® low and medium temperature compressors. These units are UL listed for US and Canada.
HWN Hermetic Compressor Model HWN Model
Compressor
HWN005H2 HWN008H2 HWN010H2 HWN015H2 HWN020H2 HWN030H2 HWN040H2 HWN050H2 HWN005X6 HWN008X6 HWN009X6 HWN010X6 HWN015X6 HWN020X6 HWN025X6 HWN030X6 HWN032X6 HWN040X6 HWN050X6 HWN011L6 HWN014L6 HWN025L6 HWN031L6
ART82C1 RS64C2 RS70C1 CR18KQ CR24KQ CR37KQ CR53KQ CRN50500 RS43C2E† RS55C2E† RS64C2E† RS70C2E† CS10K6E CS12K6E CS14K6E CS18K6E CS20K6E CS27K6E CS33K3E CF04K6E CF06K6E CF09K6E CF12K6E
Refrigerant
Suction Temp
Medium & High Temp R-22
20° F
Extended Temp R-404A/ R-507
10° F
Low Temp R-404A/ R-507
-10° F
Air Defrost Total MCA
Capacity* BTUH 208-230/ 208-230/ 1/60 3/60 5,390 7,500 8,810 11,240 14,330 23,660 33,740 40,460 4,060 5,280 6,395 6,800 9,710 11,490 13,630 17,400 19,220 23,901 28,838 5,310 8,700 12,590 16,060
15 15 15 15 20 21 33 39 15 15 15 15 15 15 15 18 21 27 35 15 15 20 21
15 15 15 15 20 24 15 15 15 15 15 15 20 21 15 15 15 15
Dimensions (in.) Approx. Net Wt. Water Water 460/ Liquid Suction (lbs.) in out L H D 3/60 (ODS) (ODS) (FTP) (MPT) 3/8 1/2 1/2 1/2 22 17 14 77 3/8 1/2 1/2 1/2 22 17 14 92 3/8 5/8 1/2 1/2 22 17 14 92 15 3/8 5/8 1/2 1/2 27 21 22 136 15 3/8 5/8 1/2 1/2 27 21 22 141 15 1/2 7/8 1/2 1/2 29 28 25 174 15 1/2 7/8 1/2 1/2 29 28 25 196 15 1/2 7/8 3/4 3/4 29 28 25 221 3/8 1/2 1/2 1/2 22 17 14 98 3/8 1/2 1/2 1/2 22 17 14 98 3/8 5/8 1/2 1/2 22 17 14 103 3/8 5/8 1/2 1/2 22 17 14 107 3/8 5/8 1/2 1/2 27 21 22 148 3/8 7/8 1/2 1/2 27 21 22 148 15 3/8 7/8 1/2 1/2 27 21 22 152 15 1/2 7/8 1/2 1/2 27 28 22 172 15 1/2 7/8 1/2 1/2 27 28 22 182 15 1/2 7/8 1/2 1/2 29 28 25 183 15 1/2 7/8 1/2 1/2 29 28 25 207 3/8 5/8 1/2 1/2 27 21 22 114 3/8 5/8 1/2 1/2 27 21 22 114 3/8 5/8 1/2 1/2 27 21 22 120 15 1/2 7/8 1/2 1/2 27 21 22 136 Connections (inches)
ZWN Scroll® Compressor Model
†
ZWN Model
Compressor
ZWN030X6 ZWN035X6 ZWN045X6 ZWN055X6 ZWN060X6 ZWN030L6 ZWN035L6 ZWN045L6 ZWN055L6 ZWN060L6
ZS21K4E ZS26K4E ZS30K4E ZS38K4E ZS45K4E ZF09K4E ZF11K4E ZF13K4E ZF15K4E ZF18K4E
Refrigerant
Suction Temp
Extended Temp R-404A/ R-507
10° F
Low Temp R-404A/ R-507
-10° F
Air Defrost Total MCA Capacity* BTUH 208-230/ 208-230/ 1/60 3/60 19,740 24,490 28,480 34,970 41,850 13,200 16,200 19,100 23,300 27,700
18.4 23.2 30 36 18 23 30 36 -
15 15.2 17 24 27 15 15 17 24 27
Dimensions (in.) Approx. Net Wt. Water Water 460/ Liquid Suction (lbs.) in out L H D 3/60 (ODS) (ODS) (FTP) (MPT) 15 1/2 7/8 1/2 1/2 29 28 25 171 15 1/2 7/8 1/2 1/2 29 28 25 186 15 1/2 7/8 1/2 1/2 29 28 25 207 15 1/2 7/8 3/4 3/4 29 28 25 226 15 1/2 7/8 3/4 3/4 29 28 25 241 15 1/2 7/8 1/2 1/2 27 28 22 159 15 1/2 7/8 1/2 1/2 27 28 22 165 15 1/2 7/8 1/2 1/2 27 28 22 185 15 1/2 7/8 1/2 1/2 27 28 22 201 15 1/2 7/8 1/2 1/2 29 28 25 207 Connections (inches)
Only for use with R-404A
* Capacity rating conditions based on: 85°F. Entering Water, 105°F. Condensing Temperature, 20°F. ITD, 0°F. Subcooling. (condensing temperature - entering condenser water temperature)
22
Condensing Units 3/4 - 22 HP Indoor Water-Cooled Condensing Units Model SWN are ‘vessel-mounted’ indoor water-cooled condensing units complete with a shell and tube
condenser. The cleanable water-cooled condenser is perfect for applications where air-cooled condensers would not be practical, or water is readily available. Available in sizes 3/4 - 22 HP the SWN units are an economical, compact selection.
SWN Model SWN Model SWN0075H2 SWN0075M2 SWN0090H2 SWN0100H2 SWN0150H2 SWN0200H2 SWN0200M2 SWN0300H2 SWN0400H2 SWN0499H2 SWN0500H2 SWN0750H2 SWN0760H2 SWN0761H2 SWN1000H2 SWN1500H2 SWN2000H2 SWN0090M6 SWN0199M6 SWN0200M6 SWN0310M6 SWN0500M6 SWN0150L6 SWN0200L6 SWN0210L6 SWN0310E6 SWN0310L6 SWN0311L6 SWN0400L6 SWN0599L6 SWN0600L6 SWN0601L6 SWN0750L6 SWN0900L6 SWN1000L6 SWN1500L6 SWN2200L6
Compressor Refrig. KAN10075 KAE10075 KARA010E KAM10100 KAGA0150 ERA10200 ERC10200 ERF10311 NRB20400 2DC3R53KE 2DD3R63KE 2DL3R78KE 2DA3R89KE 3DA3R10ME 3DB3R12ME 3DS3R17ME 4DA3R18ME KARA010E KAKA020E ERCA021E ERFA031E 2DC3R53KE KALA016E EADA020E EAVA021E LACA032E LAHA032E 2DF3F16KE 2DL3F20KE 2DA3F23KE 2DB3F25KE 3DA3F28KE 3DB3F33KE 3DF3F40KE 3DS3F46KE 4DL3F63KE 4DT3F76KE
Medium & High Temp R-22
Medium Temp R-404A/ R-507
Low Temp R-404A/ R-507
Air Defrost (Total MCA) Connections (in.) Suction Capacity* Water Water Liquid Suction Temp (BTUH) 208-230 230/1 208-230 460/ in out /1/60 /3/60 3/60 (ODS) (ODS) (FTP) (MPT) 6,700 15.0 15.0 3/8 5/8 1/2 1/2 8,000 15.0 15.0 3/8 5/8 1/2 1/2 9,370 15.0 15.0 3/8 5/8 1/2 1/2 10,690 15.0 15.0 15.0 3/8 7/8 1/2 1/2 12,150 15.0 15.0 15.0 3/8 7/8 1/2 1/2 16,090 15.0 15.0 15.0 3/8 7/8 1/2 1/2 19,480 15.0 15.0 15.0 3/8 7/8 1/2 1/2 28,290 20.0 15.0 15.0 1/2 1-1/8 3/4 3/4 40,130 24.4 15.0 1/2 1-1/8 3/4 3/4 25ºF 46,230 25.0 15.0 5/8 1-3/8 1-1/4 1-1/4 53,810 25.0 15.0 5/8 1-3/8 1-1/4 1-1/4 67,750 35.4 20.0 5/8 1-3/8 1-1/4 1-1/4 76,770 35.9 20.0 5/8 1-3/8 1-1/4 1-1/4 92,810 46.0 22.4 5/8 1-3/8 1-1/4 1-1/4 110,190 48.9 22.4 7/8 1-5/8 1-1/4 1-1/4 146,060 66.9 29.5 7/8 1-5/8 1-1/2 1-1/2 156,830 65.9 32.9 7/8 1-5/8 1-1/2 1-1/2 9,140 15.0 15.0 3/8 7/8 1/2 1/2 15,120 15.0 15.0 3/8 7/8 1/2 1/2 19,430 15.0 3/8 7/8 1/2 1/2 20ºF 28,090 20.0 15.0 15.0 1/2 1-1/8 3/4 3/4 43,470 25.0 15.0 5/8 1-3/8 1-1/4 1-1/4 6,830 15.0 15.0 15.0 3/8 7/8 1/2 1/2 7,770 15.0 15.0 3/8 7/8 1/2 1/2 8,820 20.0 15.0 15.0 3/8 7/8 1/2 1/2 18,060 20.0 15.0 15.0 1/2 1-1/8 3/4 3/4 14,180 20.0 15.0 15.0 1/2 1-1/8 3/4 3/4 19,950 28.7 20.0 15.0 1/2 1-3/8 3/4 3/4 24,260 29.5 15.0 1/2 1-3/8 3/4 3/4 -20ºF 27,930 32.3 15.0 5/8 1-3/8 1-1/4 1-1/4 29,930 31.7 15.0 5/8 1-3/8 1-1/4 1-1/4 33,600 30.0 15.0 5/8 1-3/8 1-1/4 1-1/4 39,800 34.5 20.0 5/8 1-5/8 1-1/4 1-1/4 48,620 41.5 20.0 5/8 1-5/8 1-1/4 1-1/4 55,020 46.5 20.8 7/8 1-5/8 1-1/4 1-1/4 75,390 59.0 29.5 7/8 2-1/8 1-1/2 1-1/4 90,720 74.0 37.0 7/8 2-1/8 1-1/4 1-1/4
Dimensions (in.) L
H
D
Approx. Net Wt. (lbs.)
3-3/4 3-3/4 3-3/4 3-3/4 3-3/4 3-3/4 3-3/4 26-3/4 26-3/4 30-3/8 30-3/8 35-3/8 35-3/8 35-3/8 35-3/8 35-3/8 35-3/8 23-3/4 23-3/4 23-3/4 26-3/4 30-3/8 23-3/4 23-3/4 23-3/4 26-3/4 26-3/4 26-3/4 26-3/4 30-3/8 30-3/8 30-3/8 35-3/8 35-3/8 35-3/8 35-3/8 35-3/8
37-3/8 37-3/8 37-3/8 37-3/8 37-3/8 37-3/8 37-3/8 36-3/8 36-3/8 39-1/4 39-1/4 41-1/2 41-1/2 41-1/2 41-1/2 41-1/2 41-1/2 37-3/8 37-3/8 37-3/8 36-3/8 39-1/4 37-3/8 37-3/8 37-3/8 36-3/8 36-3/8 36-3/8 36-3/8 39-1/4 39-1/4 39-1/4 41-1/2 41-1/2 41-1/2 41-1/2 41-1/2
33 33 33 33 33 33 33 38-3/8 38-3/8 42-1/2 42-1/2 55-1/2 55-1/2 55-1/2 55-1/2 55-1/2 55-1/2 33 33 33 38-3/8 42-1/2 33 33 33 38-3/8 38-3/8 38-3/8 38-3/8 42-1/2 42-1/2 42-1/2 55-1/2 55-1/2 55-1/2 55-1/2 55-1/2
165 165 180 180 195 260 260 325 385 400 400 465 465 465 715 735 795 180 210 260 325 400 195 325 325 325 325 340 385 415 415 430 465 560 715 780 865
* Capacity based on 85°F Entering Water, 105°F Condensing Temperature, 5°F Subcooling.
23
Condensing Units
3/4 - 22 HP Remote Indoor Compressor Units Model SRN
indoor compressor unit is designed for use with a remote air-cooled or evaporative condenser. Typical applications include supermarkets, warehouses, convenience stores or wherever outdoor roof or pad space is at a minimum. Available in sizes 3/4 - 22 HP, the SRN units are an economical, compact selection.
SRN Model SRN Model SRN0075H2 SRN0075M2 SRN0090H2 SRN0100H2 SRN0150H2 SRN0200H2 SRN0200M2 SRN0300H2 SRN0400H2 SRN0499H2 SRN0500H2 SRN0750H2 SRN0760H2 SRN0761H2 SRN1000H2 SRN1500H2 SRN2000H2 SRN0090M6 SRN0199M6 SRN0200M6 SRN0310M6 SRN0500M6 SRN0150L6 SRN0200L6 SRN0210L6 SRN0310E6 SRN0310L6 SRN0311L6 SRN0400L6 SRN0599L6 SRN0600L6 SRN0601L6 SRN0750L6 SRN0900L6 SRN1000L6 SRN1500L6 SRN2200L6
Compressor Refrig. KAN10075 KAE10075 KARA010E KAM10100 KAGA0150 ERA10200 ERC10200 ERF10311 NRB20400 2DC3R53KE 2DD3R63KE 2DL3R78KE 2DA3R89KE 3DA3R10ME 3DB3R12ME 3DS3R17ME 4DA3R18ME KARA010E KAKA020E ERCA021E ERFA031E 2DC3R53KE KALA016E EADA020E EAVA021E LACA032E LAHA032E 2DF3F16KE 2DL3F20KE 2DA3F23KE 2DB3F25KE 3DA3F28KE 3DB3F33KE 3DF3F40KE 3DS3F46KE 4DL3F63KE 4DT3F76KE
Medium & High Temp R-22
Medium Temp R-404A/ R-507
Low Temp R-404A/ R-507
Air Defrost (Total MCA) Connections (in.) Suction Capacity* Temp (BTUH) 208-230 230/1 208-230 460/ Liquid Suction Discharge Condenser /1/60 /3/60 3/60 Return 5,970 15.0 15.0 3/8 5/8 3/8 3/8 7,110 15.0 15.0 3/8 5/8 3/8 3/8 8,360 15.0 15.0 3/8 5/8 1/2 3/8 9,580 15.0 15.0 15.0 3/8 7/8 1/2 3/8 10,920 15.0 15.0 15.0 3/8 7/8 1/2 3/8 13,100 15.0 15.0 15.0 3/8 7/8 1/2 1/2 17,260 15.0 15.0 15.0 3/8 7/8 1/2 1/2 25,580 20.0 15.0 15.0 1/2 1-1/8 5/8 5/8 35,260 24.4 15.0 1/2 1-1/8 5/8 5/8 25ºF 41,290 25.0 15.0 5/8 1-3/8 7/8 5/8 48,320 25.0 15.0 5/8 1-3/8 7/8 5/8 61,380 35.4 20.0 5/8 1-3/8 7/8 7/8 69,680 35.9 20.0 5/8 1-3/8 7/8 7/8 84,740 46.0 22.4 5/8 1-3/8 1-1/8 7/8 101,120 48.9 22.4 7/8 1-5/8 1-1/8 7/8 134,160 66.9 29.5 7/8 1-5/8 1-1/8 1-1/8 143,520 65.9 32.9 7/8 1-5/8 1-3/8 1-1/8 7,780 15.0 15.0 3/8 7/8 1/2 3/8 12,850 15.0 15.0 3/8 7/8 1/2 1/2 16,310 15.0 3/8 7/8 1/2 1/2 20ºF 24,080 20.0 15.0 15.0 1/2 1-1/8 5/8 5/8 37,370 25.0 15.0 5/8 1-3/8 7/8 5/8 6,470 15.0 15.0 15.0 3/8 7/8 1/2 3/8 7,310 15.0 15.0 3/8 7/8 1/2 1/2 8,270 20.0 15.0 15.0 3/8 7/8 1/2 1/2 17,070 20.0 15.0 15.0 1/2 1-1/8 5/8 5/8 13,250 20.0 15.0 15.0 1/2 1-1/8 5/8 5/8 19,080 28.7 20.0 15.0 1/2 1-3/8 7/8 5/8 23,110 29.5 15.0 1/2 1-3/8 7/8 5/8 -20ºF 26,710 32.3 15.0 5/8 1-3/8 7/8 5/8 28,620 31.7 15.0 5/8 1-3/8 7/8 5/8 32,330 30.0 15.0 5/8 1-3/8 1-1/8 5/8 38,370 34.5 20.0 5/8 1-5/8 1-1/8 7/8 46,850 41.5 20.0 5/8 1-5/8 1-1/8 7/8 52,890 46.5 20.8 7/8 1-5/8 1-1/8 7/8 72,720 59.0 29.5 7/8 2-1/8 1-1/8 7/8 86,710 74.0 37.0 7/8 2-1/8 1-1/8 7/8
* Based on 110°F Condensing Temperature, 6°F Subcooling for Low Temp models and 120°F Condensing Temperature, 8°F Subcooling for Medium & High Temp models.
24
Dimensions (in.) L
H
D
23-3/4 23-3/4 23-3/4 23-3/4 23-3/4 23-3/4 23-3/4 26-3/4 26-3/4 30-3/8 30-3/8 35-3/8 35-3/8 35-3/8 35-3/8 35-3/8 35-3/8 23-3/4 23-3/4 23-3/4 26-3/4 30-3/8 23-3/4 23-3/4 23-3/4 26-3/4 26-3/4 26-3/4 26-3/4 30-3/8 30-3/8 30-3/8 35-3/8 35-3/8 35-3/8 35-3/8 35-3/8
36-3/8 36-3/8 36-3/8 36-3/8 36-3/8 36-3/8 36-3/8 39-1/4 39-1/4 39-1/4 39-1/4 43-1/2 43-1/2 43-1/2 43-1/2 43-1/2 43-1/2 36-3/8 36-3/8 36-3/8 39-1/4 39-1/4 36-3/8 36-3/8 36-3/8 39-1/4 39-1/4 39-1/4 39-1/4 39-1/4 39-1/4 39-1/4 43-1/2 43-1/2 43-1/2 43-1/2 43-1/2
35 35 35 35 35 35 35 40 40 42-1/2 42-1/2 47 47 47 47 47 47 35 35 35 40 42-1/2 35 35 35 40 40 40 40 42-1/2 42-1/2 42-1/2 47 47 47 47 47
Approx. Net Wt. (lbs.) 155 155 160 160 175 245 245 305 360 375 375 385 385 385 595 615 665 155 200 245 305 375 175 305 305 305 305 320 360 390 390 405 385 520 650 710 725
Air-Cooled Condensers
Direct-Drive Air-Cooled Condensers Model WSS direct-drive air-cooled condensers are the industry standard for
remote air-cooled applications. Key WSS benefits such as versatility, simplicity of design and easy serviceability are the most recognized. • Fully baffled fan sections to provide structural strength and prevent fan windmilling in the off cycle • Multicircuiting at no extra cost • Optional coils, including polyester fin coating, baked epoxy coating and all copper for corrosive or damaging atmospheres • Weatherproof junction box, with motor leads terminating for single-point field wiring • Available in either vertical or horizontal airflow arrangement • Optional flooding valve, fan cycling or variable-speed fan cycling for head pressure control • Coated steel fan guards • PSC motors come standard to help you save energy
WSS Model WSS Model WSS008 WSS009 WSS010 WSS016 WSS024 WSS040 WSS049 WSS061 WSS070 WSS080 WSS105 WSS113 WSS133
Total Heat Rejection No. 30ºF TD of R-404A, Fans R-22 507 22.9 22.4 1 26.7 26.2 1 30.5 29.9 1 47.1 46.2 1 73.0 71.5 1 120.0 117.6 1 146.0 143.1 2 182.4 178.8 2 209.6 205.5 2 239.6 234.8 2 314.2 307.9 3 339.6 332.8 3 398.2 390.2 3
CFM
Motor HP
2,400 2,400 2,400 2,100 5,050 6,450 10,100 12,400 13,700 12,900 20,500 19,900 19,400
1/4 1/4 1/4 1/4 1/3 1/2 1/3 1/2 1/2 1/2 1/2 1/2 1/2
FLA
Dimensions (in.)
208208460/3/601 L H 230/1/60 230/3/601 2.0 – – 37-1/2 22 2.0 – – 37-1/2 22 2.0 – – 37-1/2 22 2.0 – – 37-1/2 40-1/2 3.4 2.6 1.3 39-3/4 40-1/2 3.9 2.6 1.3 49-3/4 40-1/2 6.8 5.2 2.6 69-3/4 40-1/2 7.8 5.2 2.6 69-3/4 40-1/2 7.8 5.2 2.6 89-3/4 40-1/2 7.8 5.2 2.6 89-3/4 40-1/2 11.7 7.8 3.9 129-3/4 40-1/2 11.7 7.8 3.9 129-3/4 40-1/2 11.7 7.8 3.9 129-3/4 40-1/2
Connections (in.) D
Inlet
Outlet
Approx. Net Wt. (lbs.)
43 43 43 43 43 43 43 43 43 43 43 43 43
3/8 5/8 7/8 7/8 1-1/8 1-1/8 (2) 1-1/8 (2) 1-1/8 (2) 1-1/8 (2) 1-3/8 (2) 1-5/8 (2) 1-5/8 (2) 1-5/8
3/8 5/8 5/8 5/8 7/8 7/8 (2) 7/8 (2) 7/8 (2) 7/8 (2) 1-1/8 (2) 1-1/8 (2) 1-1/8 (2) 1-1/8
96 96 96 114 180 260 450 470 510 530 550 580 625
NOTE: WSS 008 - 009 available in 115/1/60 voltage 1
Motors are 1/3 HP
25
Air-Cooled Condensers Models CNE, CNQ, CNX, CNL and CNH Air-Cooled Condensers Advantage™ and Reliant™ series air-cooled condensers feature improved energy efficiency and low sound levels, which
are key features sought by the supermarket and grocery industry. Traditional condensers using 1140 RPM motors offer high capacities, but cannot meet the low sound and energy efficiency standards demanded today by this industry. Now, Climate Control brings the best of both worlds together with advanced solutions that offer high capacities for operation, while meeting the low sound and energy efficiency requirements you demand.
Model CNE with EC motor technology offers all the benefits of variable speed motors without the complexity. EC motors utilize variable-speed technology, which optimizes fan speeds for load requirements, maximizes energy efficiency and minimizes sound.
Models CNQ, CNX and CNL features Climate Control’s patented QuietEdge™ technology that uses specially designed swept fan blades to reduce noise levels. These blades are uniquely designed for each motor speed, optimizing performance and ensuring you’re receiving the lowest sound levels possible. Look for the QuietEdge™ 4 blade on the 540 RPM motors and the QuietEdge™ 5 on the 830 RPM motors.
Model CNH continues to offer Climate Control’s 1140 RPM series for customers seeking the most economical solution for their capacity requirements.
Advantage™ Series Model CNE, 2.2 kW, 31.5” Fan Diameter THR, MBH/1°F TD
Total FLA
CNE Model
R-22
R-404A
CNES01A008 CNES01A009 CNES02A011 CNES02A015 CNES02A018 CNES03A023 CNES03A027 CNES04A031 CNES04A036 CNES05A039 CNES05A047 CNES06A056 CNES07A065
7.7 9.3 11.3 15.4 18.1 23.1 27.2 30.8 36.3 39.3 46.6 56.0 64.6
7.6 9.1 11.1 15.1 17.8 22.7 26.7 30.2 35.5 38.5 45.7 54.8 63.3
11,000 10,500 23,400 22,000 20,900 33,100 31,400 42,600 40,000 53,200 50,000 60,000 70,000
7.0 7.0 14.0 14.0 14.0 21.0 21.0 28.0 28.0 35.0 35.0 42.0 49.0
CNED04A023 CNED04A031 CNED04A036 CNED06A046 CNED06A054 CNED08A062 CNED08A073 CNED10A079 CNED10A093 CNED12A112 CNED14A129
22.7 30.8 36.3 46.2 54.4 61.7 72.5 78.6 93.3 111.9 129.2
22.2 30.2 32.5 45.3 53.3 60.5 71.1 77.0 91.4 109.7 126.7
46,700 44,100 41,800 66,100 62,700 85,100 80,000 106,400 100,100 120,100 140,100
28.0 28.0 28.0 42.0 42.0 56.0 56.0 70.0 70.0 84.0 98.0
CFM
230/3/60
460/3/60
Single Row 3.5 3.5 7.0 7.0 7.0 10.5 10.5 14.0 14.0 17.5 17.5 21.0 24.5 Double Row 14.0 14.0 14.0 21.0 21.0 28.0 28.0 35.0 35.0 42.0 49.0
Maximum No. of Feeds
Connections (in.)
Refrigerant Summer Charge R-22 (lbs.)
Approx. Net Wt. (lbs.)
7 14 14 21 28 21 28 21 28 21 28 28 28
1-3/8 1-3/8 1-3/8 1-5/8 2-1/8 2-1/8 2-1/8 2-1/8 2-5/8 2-5/8 2-5/8 2-5/8 (2) 2-5/8
8 10 10 15 29 22 30 51 70 64 86 102 118
330 360 590 640 690 930 1,010 1,220 1,320 1,520 1,650 1,960 2,260
28 42 56 42 56 42 56 42 56 56 56
(2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (4)
19 29 40 44 58 104 140 125 172 201 236
1,290 1,390 1,490 2,060 2,210 2,730 2,930 3,410 3,660 4,370 5,070
1-3/8 1-5/8 2-1/8 2-1/8 2-1/8 2-1/8 2-5/8 2-5/8 2-5/8 2-5/8 2-5/8
Bold indicates standard model capacity at 10 FPI
Advantage™ Series Reliant™ Series
26
Air-Cooled Condensers Reliant™ Series Model CNQ, 540 RPM, 0.5 HP, 30” Fan Diameter CNQ Model
THR, MBH/1°F TD
Total FLA CFM
R-22
R-404A
230/3/60
CNQS01A005 CNQS01A006 CNQS02A008 CNQS02A010 CNQS02A011 CNQS03A016 CNQS03A017 CNQS04A021 CNQS04A023 CNQS05A026 CNQS05A029 CNQS06A034 CNQS07A042
5.2 6.1 8.0 10.3 11.5 15.6 17.2 20.7 22.9 25.9 28.6 34.4 41.6
5.1 5.9 7.8 10.1 11.2 15.2 16.9 20.3 22.4 25.4 28.1 33.7 40.7
5,400 5,200 11,200 10,800 10,400 16,100 15,600 21,500 20,800 26,900 26,000 31,200 36,400
3.5 3.5 7.0 7.0 7.0 10.5 10.5 14.0 14.0 17.5 17.5 21.0 24.5
CNQD04A016 CNQD04A021 CNQD04A023 CNQD06A031 CNQD06A034 CNQD08A041 CNQD08A046 CNQD10A052 CNQD10A057 CNQD12A069 CNQD14A083
16.0 20.7 22.9 31.0 34.4 41.4 45.8 51.8 57.3 68.7 83.1
15.6 20.3 22.4 30.4 33.7 40.6 44.9 50.7 56.1 67.3 81.5
22,300 21,500 20,800 32,300 31,200 43,000 41,600 53,700 52,100 62,500 72,900
14.0 14.0 14.0 21.0 21.0 28.0 28.0 35.0 35.0 42.0 49.0
460/3/60
Single Row 1.8 1.8 3.5 3.5 3.5 5.3 5.3 7.0 7.0 8.8 8.8 10.5 12.3 Double Row 7.0 7.0 7.0 10.5 10.5 14.0 14.0 17.5 17.5 21.0 24.5
Maximum No. of Feeds
Connections (in.)
Refrigerant Summer Charge R-22 (lbs.)
Approx. Net Wt. (lbs.)
7 14 14 21 28 21 28 21 28 21 28 28 28
1-3/8 1-3/8 1-3/8 1-5/8 2-1/8 2-1/8 2-1/8 2-1/8 2-5/8 2-5/8 2-5/8 2-5/8 (2) 2-5/8
8 10 10 15 29 22 30 51 70 64 86 102 118
330 360 580 630 680 930 1,000 1,210 1,310 1,510 1,640 1,950 2,240
28 42 56 42 56 42 56 42 56 56 56
(2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (4)
19 29 40 44 58 104 140 125 172 201 236
1,240 1,340 1,440 1,990 2,140 2,630 2,830 3,290 3,540 4,230 4,910
1-3/8 1-5/8 2-1/8 2-1/8 2-1/8 2-1/8 2-5/8 2-5/8 2-5/8 2-5/8 2-5/8
Bold indicates standard model capacity at 10 FPI
Reliant™ Series Model CNX, 830 RPM, 1.0 HP, 30” Fan Diameter CNX Model
THR, MBH/1°F TD
Total FLA CFM
230 /3/60
R-22
R-404A
CNXS01A006 CNXS01A008 CNXS02A010 CNXS02A013 CNXS02A015 CNXS03A020 CNXS03A023 CNXS04A026 CNXS04A030 CNXS05A033 CNXS05A038 CNXS06A045 CNXS07A052
6.4 7.5 9.8 13.1 15.1 19.7 22.7 26.3 30.3 32.8 37.8 45.4 52.0
6.2 7.4 9.6 12.8 14.8 19.3 22.3 25.7 29.7 32.1 37.1 44.5 51.0
7,600 7,300 15,900 15,200 14,700 22,900 22,000 29,800 28,400 37,300 35,500 42,600 49,700
4.8 4.8 9.6 9.6 9.6 14.4 14.4 19.2 19.2 24.0 24.0 28.8 33.6
CNXD04A020 CNXD04A026 CNXD04A030 CNXD06A039 CNXD06A045 CNXD08A052 CNXD08A061 CNXD10A066 CNXD10A076 CNXD12A091 CNXD14A104
19.6 26.2 30.3 39.4 45.4 52.5 60.6 65.6 75.7 90.8 104.1
19.2 25.7 29.7 38.6 44.5 51.4 59.3 64.3 74.2 89.0 102.0
31,700 30,500 29,300 45,700 44,000 59,700 56,800 74,600 71,000 85,200 99,400
19.2 19.2 19.2 28.8 28.8 38.4 38.4 48.0 48.0 57.6 67.2
460 /3/60 Single Row 2.4 2.4 4.8 4.8 4.8 7.2 7.2 9.6 9.6 12.0 12.0 14.4 16.8 Double Row 9.6 9.6 9.6 14.4 14.4 19.2 19.2 24.0 24.0 28.8 33.6
Maximum No. of Feeds
Connections (in.)
Refrigerant Summer Charge R-22 (lbs.)
Approx. Net Wt. (lbs.)
7 14 14 21 28 21 28 21 28 21 28 28 28
1-3/8 1-3/8 1-3/8 1-5/8 2-1/8 2-1/8 2-1/8 2-1/8 2-5/8 2-5/8 2-5/8 2-5/8 (2) 2-5/8
8 10 10 15 29 22 30 51 70 64 86 102 118
330 360 580 630 680 930 1,000 1,210 1,310 1,510 1,640 1,950 2,240
28 42 56 42 56 42 56 42 56 56 56
(2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (4)
19 29 40 44 58 104 140 125 172 201 236
1,240 1,340 1,440 1,990 2,140 2,630 2,830 3,290 3,540 4,230 4,910
1-3/8 1-5/8 2-1/8 2-1/8 2-1/8 2-1/8 2-5/8 2-5/8 2-5/8 2-5/8 2-5/8
Bold indicates standard model capacity at 10 FPI
27
Air-Cooled Condensers Reliant™ Series Model CNL, 830 RPM, 1.5 HP, 30” Fan Diameter THR, MBH/1°F TD
Total FLA
CNL Model
R-22
R-404A
CNLS01A007 CNLS01A008 CNLS02A010 CNLS02A014 CNLS02A016 CNLS03A021 CNLS03A024 CNLS04A028 CNLS04A032 CNLS05A035 CNLS05A042 CNLS06A050 CNLS07A055
6.7 8.0 10.1 13.9 16.1 20.9 24.2 27.8 32.3 35.5 41.6 49.9 55.0
6.6 7.8 9.9 13.6 15.8 20.5 23.8 27.3 31.7 34.7 40.8 48.9 53.9
8,400 8,000 17,500 16,700 16,100 25,100 24,100 32,800 31,200 41,000 39,100 46,900 54,700
6.6 6.6 13.2 13.2 13.2 19.8 19.8 26.4 26.4 33.0 33.0 39.6 46.2
CNLD04A020 CNLD04A028 CNLD04A032 CNLD06A042 CNLD06A048 CNLD08A056 CNLD08A065 CNLD10A071 CNLD10A083 CNLD12A100 CNLD14A110
20.2 27.8 32.3 41.8 48.4 55.7 64.6 70.9 83.1 99.8 110.0
19.8 27.3 31.7 40.9 47.5 54.6 63.3 69.5 81.5 97.8 107.9
35,000 33,500 32,100 50,200 48,200 65,600 62,500 82,000 78,100 93,700 109,300
26.4 26.4 26.4 39.6 39.6 52.8 52.8 66.0 66.0 79.2 92.4
CFM
Maximum No. of Feeds 230/3/60 460/3/60 575/3/60 Single Row 3.3 3.3 6.6 6.6 6.6 9.9 9.9 13.2 13.2 16.5 16.5 19.8 23.1 Double Row 13.2 13.2 13.2 19.8 19.8 26.4 26.4 33.8 33.0 39.6 46.2
Connections (in.)
Refrigerant Summer Charge R-22 (lbs.)
Approx. Net Wt. (lbs.)
2.6 2.6 5.2 5.2 5.2 7.8 7.8 10.4 10.4 13.0 13.0 15.6 18.2
7 14 14 21 28 21 28 21 28 21 28 28 28
1-3/8 1-3/8 1-3/8 1-5/8 2-1/8 2-1/8 2-1/8 2-1/8 2-5/8 2-5/8 2-5/8 2-5/8 (2) 2-5/8
8 10 10 15 29 22 30 51 70 64 86 102 118
330 360 580 630 680 930 1,000 1,210 1,310 1,510 1,640 1,950 2,240
10.4 10.4 10.4 15.6 15.6 20.8 20.8 26.0 26.0 31.2 36.4
28 42 28 56 56 42 56 42 56 56 56
(2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (4)
19 29 40 44 58 104 140 125 172 201 236
1,240 1,340 1,440 1,990 2,140 2,630 2,830 3,290 3,540 4,230 4,910
Connections (in.)
Refrigerant Summer Charge R-22 (lbs.)
Approx. Net Wt. (lbs.)
1-3/8 1-5/8 2-1/8 2-1/8 2-1/8 2-1/8 2-5/8 2-5/8 2-5/8 2-5/8 2-5/8
Bold indicates standard model capacity at 10 FPI
1140 Series Model CNH, 1140 RPM, 1.5 HP, 30” Fan Diameter THR, MBH/1°F TD
Total FLA
CNH Model
R-22
R-404A
CNHS01A007 CNHS01A009 CNHS02A011 CNHS02A015 CNHS02A017 CNHS03A022 CNHS03A026 CNHS04A029 CNHS04A034 CNHS05A037 CNHS05A044 CNHS06A053 CNHS07A061
7.3 8.7 10.7 14.5 17.1 21.8 25.7 29.1 34.2 37.1 44.0 52.8 61.0
7.2 8.6 10.5 14.2 16.7 21.4 25.2 28.5 33.5 36.4 43.1 51.7 59.8
9,900 9,500 20,500 19,800 19,000 29,700 28,500 38,600 37,000 48,300 46,200 55,400 64,700
7.0 7.0 14.0 14.0 14.0 21.0 21.0 28.0 28.0 35.0 35.0 42.0 49.0
CNHD04A021 CNHD04A029 CNHD04A034 CNHD06A044 CNHD06A051 CNHD08A058 CNHD08A068 CNHD10A074 CNHD10A088 CNHD12A106 CNHD14A122
21.4 29.1 34.2 43.6 51.3 58.2 68.4 74.2 88.0 105.6 121.9
21.0 28.5 33.5 42.8 50.3 57.0 67.1 72.7 86.2 103.5 119.5
41,000 39,600 38,100 59,400 57,100 77,200 73,900 96,500 92,400 110,900 129,400
28.0 28.0 28.0 42.0 42.0 56.0 56.0 70.0 70.0 84.0 98.0
Bold indicates standard model capacity at 10 FPI
28
CFM
Maximum No. of Feeds 208/3/60 460/3/60 575/3/60 Single Row 3.5 3.5 7.0 7.0 7.0 10.5 10.5 14.0 14.0 14.0 17.5 17.5 21.0 Double Row 24.5 14.0 14.0 21.0 21.0 28.0 28.0 35.0 35.0 42.0 49.0
2.8 2.8 5.6 5.6 5.6 8.4 8.4 11.2 11.2 14.0 14.0 16.8 19.6
7 14 14 21 28 21 28 21 28 21 28 28 28
1-3/8 1-3/8 1-3/8 1-5/8 2-1/8 2-1/8 2-1/8 2-1/8 2-5/8 2-5/8 2-5/8 2-5/8 (2) 2-5/8
8 10 10 15 29 22 30 51 70 64 86 102 118
330 360 580 630 680 930 1,000 1,210 1,310 1,510 1,640 1,950 2,240
11.2 11.2 11.2 16.8 16.8 22.4 22.4 28.0 28.0 33.6 39.2
28 42 56 42 56 42 56 42 56 56 56
(2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (4)
19 29 40 44 58 104 140 125 172 201 236
1,240 1,340 1,440 1,990 2,140 2,630 2,830 3,290 3,540 4,230 4,910
1-3/8 1-5/8 2-1/8 2-1/8 2-1/8 2-1/8 2-5/8 2-5/8 2-5/8 2-5/8 2-5/8
Fluid Coolers Direct-Drive Fluid Coolers Model WGS vertical or horizontal air flow direct-drive fluid coolers are easy to install and maintain, yet are ruggedly designed to handle all applications. Available in a variety of sizes, the WGS units have design features ideal for the commercial/industrial locations. Specifically engineered for outdoor installations, the cabinet is constructed of heavy gauge aluminum or pre-painted galvanized steel to resist corrosion in all climates. Additional design features include: • Fully baffled fan sections to prevent windmilling • Single-point wiring to junction box • Balanced fans, featuring heavy gauge aluminum blades riveted to plated steel spiders
WGS Model WGS Model
CFM
WGS049 WGS088 WGS107 WGS123 WGS147 WGS165 WGS211 WGS225 WGS248
5,050 6,450 10,100 12,400 13,700 12,900 20,500 19,900 19,400
Vol. in Gal. 3 4 4 4 5 6 7 7 9
Base Capacity Range 1° F TD, 40% E. Glycol (130° Average Temp) Minimum Maximum GPM MBH PD/F GPM MBH PD/F 10 2.23 4.7 30 2.97 15.5 10 3.07 7.4 60 4.62 13.0 10 3.46 7.5 60 6.10 28.2 10 3.62 7.5 60 6.88 28.2 10 3.92 9.4 50 7.64 25.2 10 4.17 12.4 60 8.70 20.9 15 5.93 12.3 120 12.31 25.7 20 6.99 6.8 120 12.94 25.7 20 7.65 12.9 160 14.08 25.7
Motor Qty.
HP
1 1 2 2 2 2 3 3 3
1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3
Dimensions (in.)
208-230V 3 Ph. L 2.6 40 2.6 50 5.2 70 5.2 70 5.2 90 2.5 90 7.8 130 7.8 130 7.8 130
H 40-1/2 40-1/2 40-1/2 40-1/2 40-1/2 40-1/2 40-1/2 40-1/2 40-1/2
Connections (in.) D 43 43 43 43 43 43 43 43 43
Inlet 1-3/8 1-5/8 2-1/8 2-1/8 2-1/8 2-1/8 2-5/8 2-5/8 2-5/8
Outlet 1-3/8 1-5/8 2-1/8 2-1/8 2-1/8 2-1/8 2-5/8 2-5/8 2-5/8
Approx. Dry Net Wt. (lbs.) 180 260 450 470 510 530 550 580 625
*Motors also available in 208-230/1, 460/3
Refrigeration Controls and Technology Beacon II™ Refrigeration System is Climate Control’s patented, pre-assembled, factory-installed refrigeration system featuring an integrated microcomputer-based electronic control board. Beacon II™ offers: • Complete factory installation, wiring and testing, saving time and money • Simplified field electrical connections and 24 volt wiring between condenser and evaporator coil • Preset factory superheat allows the system to run more efficiently and reduces future adjustments • Monitors and controls box temperature, evaporator superheat, system status and defrost • Monitor and make system changes remotely via modem with exclusive Beacon II™ Smart II software with Beacon II™ Smart Controller • Data-logging capabilities with Smart Controller
™
Beacon II™ Smart Controller allows you to monitor and make changes to the refrigeration system
via modem connection from anywhere in the world. One Smart Controller can program and control up to four condensing units with up to four evaporators on each system.
The patented Beacon II™ Smart Defrost system available with Beacon II™ Smart Controller can reduce the number of system defrost by 75 percent on average, greatly reducing the amount of energy used and reducing operating costs.
Beacon II™ Smart II Software makes it easy to adjust and monitor one or more refrigeration systems
as well as capture minute-by-minute system conditions. This Windows®-based software allows you to connect to the Beacon II™ Smart Controller from anywhere in the world to monitor the systems, make adjustments and log real-time system conditions. This data-logging capability is critical in the food-service industry.
Smart Defrost Kit™ (SDK), available as a factory installed option on condensing units or as an
aftermarket retrofit kit via Interlink Commercial Refrigeration Parts, is a control module that can reduce the number of defrosts by up to 40% on a typical commercial refrigeration system. This reduces energy consumption and costs.
29
Additional Products from Climate Control
The Mohave advanced hot gas defrost refrigeration system with electronic controller utilizes hot gas to greatly reduce defrost times and operates in all outdoor ambient temperatures.* This leads to increased energy efficiency and product integrity in a refrigeration system that can be used in a greater variety of environmental conditions. This system utilizes a state-of-the-art electronic defrost controller with a proprietary control scheme that allows the system to continually operate at its most optimal level.
Condensing Unit
• Integral condenser sub-cooling circuit in condenser for added capacity and vapor free liquid • Floating Tube™ condenser coil design • Electronic defrost controller • Pressure or ambient fan cycling for head pressure control • Electronic pressure regulator for defrost control • Anti-short cycling protection • High pressure and low pressure controls • Oil pressure safety control • Easily accessible control box • High efficiency Copeland Discus® compressors with poe oil • Thermally protected permanently lubricated ball bearing condenser fan motor(s) • Receivers are sized for sufficient pumpdown capacity with inlet and outlet service valves • Cabinet is constructed from painted galvanized steel • Replaceable core liquid line filter drier • Replaceable core suction filter
Evaporators
• All components are factory installed and wired • Independent or single point power supply from condensing unit • 4 and 6 FPI medium and large unit coolers
Features: • • • • •
Mounted TXV and distributor nozzle Mounted check valves Mounted liquid line solenoid Mounted suction “P” trap Electric drain pan heater standard (mounted hot gas drain loop optional) • Mounted and wired control contactors
*Tested to -20°F ambient.
Multiple Compressor Condensing Units The FlexPack™ provides many features that produce outstanding results for both your refrigeration system and your bottom line. Flexibility for a wide range of applications • Modular design accommodates up to three compressors (0.5-6 HP Hermetic or Scroll®) • System capacity range from 5 – 18 HP (dependent upon cabinet size) Durability and Reliability • 14-gauge galvanized steel frame • 1-year parts warranty • 4-year optional compressor warranty Reduced installation costs and easy serviceability • Hinged access panels to refrigeration and electrical components • Single roof penetration • Single-point main power • Clean and intuitive electrical and piping layout Energy efficiency and reduced noise • Remote condenser circuits • Reduces heat load into space resulting in lower air conditioning energy costs • Recessed, vertical-discharge, flush-mounted 18" fans with 1100 RPM motors • Reduces noise levels
30
Clean and uniform appearance • Painted galvanized steel cabinet • Small footprint
(QJLQHHUHGSolutions
TM
)URP VWDUW WR ILQLVK
Air Handlers • Available in sizes 03-75 • Multiple coil types and accessories available to fit specific application needs • Engineered and built to fit your unique project requirements
Indoor and Outdoor Racks
• • • •
Available with up to 8 parallel-piped compressors Can be used with air-cooled, water-cooled or evaporative-cooled condensers Engineered and built to fit your unique project requirements ETL-508a listed control panel
Customer Specific Orders
We have a wide range of capabilities and will work with you, from start to finish, to create a customized solution for your needs. With Engineered Solutions, we will visualize, design, and realize the product required for the job. Contact your sales representative today to get the process started!
31
For more information on Climate Control products, contact your Climate Control sales representative or visit us at www.coldyoucancounton.com
CLIMATE CONTROL Cold You Can Count On A Brand of Heatcraft Refrigeration Products, LLC 2175 West Park Place Blvd. • Stone Mountain, GA 30087 (800) 321-1881 www.coldyoucancounton.com Since product improvement is a continuing effort, we reserve the right to make changes in specifications without notice. CC-CC-0209 | version 000
