WILO UK Limited Centrum 100, Second Avenue Burton on Trent, Staffs DE14 2WJ T +44 (0) 1283 523000 F +44 (0) 1283 523099
[email protected] www.wilo.co.uk Wilo Ireland Unit B1, Corcanree Business Park Dock Road, Limerick, Ireland T: +353 (0)61 227566 F: +353 (0)61 229017
[email protected] www.wilo.ie
Future proof high efficiency products from Wilo.
Range Guide. Building Services - Commercial.
Product category Glanded energy-saving pumps in in-line design Series Wilo-VeroLine-IP-E Wilo-VeroTwin-DP-E
Product category Glanded energy-saving pumps in in-line design Series Wilo-CronoLine-IL-E Wilo-CronoTwin-DL-E
Product category Glanded standard pumps in in-line design Series Wilo-VeroLine-IPL Wilo-VeroTwin-DPL
Product category Glanded standard pumps in in-line design Series Wilo-CronoLine-IL Wilo-CronoTwin-DL
Design Electronically controlled glanded pump in in-line design with flange connection and automatic power adjustment
Design Electronically controlled glanded pump in in-line design with flange connection and automatic power adjustment
Design Glanded pump in in-line design with threaded connection or flange connection
Design Glanded pump in in-line design with flange connection
Application For pumping heating water (in accordance with VDI 2035), water-glycol mixtures and cooling and cold water without abrasive substances in heating, cold water and cooling water systems
Application For pumping heating water (in accordance with VDI 2035), water-glycol mixtures and cooling and cold water without abrasive substances in heating, cold water and cooling water systems
Application For pumping heating water (in accordance with VDI 2035), water-glycol mixtures and cooling and cold water without abrasive substances in heating, cold water and cooling water systems
Application For pumping heating water (in accordance with VDI 2035), water-glycol mixtures and cooling and cold water without abrasive substances in heating, cold water and cooling water systems
Q max. 170 m³/h
Q max. 680 m³/h
Q max. 245 m³/h
Q max. 1,150 m³/h
H max. 30 m
H max. 65 m
H max. 52 m
H max. 110 m
Technical data • Permissible temperature range -20 °C to +120 °C • Mains connection: 3~400 V, 50 Hz; 3~380 V, 60 Hz • Protection class IP 55 • Nominal diameter DN 32 to DN 80 • Max. operating pressure 10 bar (special version: 16 bar)
Technical data • Permissible temperature range -20 °C to +140 °C • Mains connection: 3~400 V, 50 Hz; 3~380 V, 60 Hz • Protection class IP 55 • Nominal diameter DN 40 to DN 80 • Max. operating pressure 16 bar
Technical data • Perm. temperature range -20 °C to +120 °C • Mains connection 3~400 V, 50 Hz • Protection class IP 55 • Nominal diameter Rp 1 to DN 100 • Max. operating pressure 10 bar (special version: 16 bar)
Technical data • Perm. temperature range -20 °C to+140 °C • Mains connection 3~400 V, 50 Hz • Protection class IP 55 • Nominal diameter DN 32 to DN 250 • Max. operating pressure 16 bar (25 bar on request)
Equipment/function Single-stage, low-pressure centrifugal pump in in-line design with • Mechanical seal • Flange connection • Motor with integrated electronic speed control • DP-E with switchover valve
Equipment/function Single-stage, low-pressure centrifugal pump in in-line design with • Mechanical seal • Flange connection • Lantern • Coupling • Engine with integrated electronic power adjustment • DL-E with switchover valve
Equipment/function Single-stage, low-pressure centrifugal pump in in-line design with • Mechanical seal • For flange connection with pressure measuring connection R ½ • Motor with one-piece shaft • DPL with switchover valve
Equipment/function Single-stage, low-pressure centrifugal pump in in-line design with • Mechanical seal • Flange connection with pressure measuring connection R ½ • Lantern • Coupling • IEC standard motor • DL with switchover valve
Materials: • Pump housing and lantern: EN-GJL-250 • Impeller: PPO-GF30 • Shaft: 1.4021 • Mechanical seal: AQEGG Other mechanical seals: on request
Materials: • Pump housing and lantern: EN-GJL-250 • Impeller: Standard version: EN-GJL-200 special version: G-CuSn 10 • Shaft: 1.4122 • Mechanical seal: AQEGG Other mechanical seals: on request
Materials: • Pump housing and lantern: EN-GJL-250 • Impeller: PPO fibreglass-reinforced EN-GJL-200 (depending on pump type) • Shaft: 1.4021 • Mechanical seal: AQEGG; other mechanical seals on request
Materials: • Pump housing and lantern: Standard version: EN-GJL-250 Optional: Spheroidal cast iron EN-GJS-400-18-LT • Impeller: Standard: EN-GJL200 Special version: Red brass G-CuSn 10 • Shaft: 1.4122 • Mechanical seal: AQEGG Other mechanical seals: on request
Special features • Motors with higher efficiency as standard; from 0.75 kW nominal motor power motors with IE2 technology • Energy savings due to integrated electronic power control • Simple operation with red-button technology and display • Various control modes Δp-c, Δp-v, PID and n-const. (control mode) • Analogue interfaces 0-10 V, 2-10 V, 0-20 mA, 4-20 mA • Optional interfaces for bus communication using plug-in IF-Modules • Integrated dual pump management • Integrated full motor protection (PTC thermistor sensor) with trip electronics
Special features • Motors with IE2 technology for higher efficiency fitted as standard • Energy savings due to integrated electronic power control • Simple operation with red-button technology and display • Various control modes Δp-c, Δp-v, PID and n-const. (control mode) • Analogue interfaces 0-10 V, 2-10 V, 0-20 mA, 4-20 mA • Optional interfaces for bus communication using plug-in IF-Modules • Integrated dual pump management • Integrated full motor protection (PTC thermistor sensor) with trip electronics
Special features • Motors with higher efficiency as standard; from 0.75 kW nominal motor power motors with IE2 technology • Standard condensate drainage holes in the motor housings and lanterns • Series version: Motor with one-piece shaft • Version N: Standard motor B5 or V1 with stainless steel plug shaft • Bidirectional mechanical seal with forced flushing • Easy to install due to feet with threaded holes on pump housing
Special features • Motors with higher efficiency as standard; from 0.75 kW nominal motor power motors with IE2 technology • Reduced life cycle costs due to optimised efficiency • Standard condensate drainage holes in the motor housings • Can be used flexibly in air-conditioning and cooling systems, with application benefits due direct draining of condensate via optimised lantern design (patented) • Bidirectional mechanical seal with forced flushing • High worldwide availability of standard motors (according to Wilo specifications) and standard mechanical seals • Easy to install due to feet with threaded holes on pump housing
Information Online catalogue www.wilo.com Building Services catalogue, Heating, Air-Conditioning, Cooling
Information Online catalogue www.wilo.com Building Services catalogue, Heating, Air-Conditioning, Cooling
Information Online catalogue www.wilo.com Building Services catalogue, Heating, Air-Conditioning, Cooling
Information Online catalogue www.wilo.com Building Services catalogue, Heating, Air-Conditioning, Cooling
Worldwide. High-efficiency solutions from Wilo. 3
WILO SE, with headquarters in Dortmund, is one of the world’s leading manufacturers of pumps and pump systems for heating, air conditioning and cooling technology, as well as for water supplies and sewage treatment and disposal. Founded in 1872 as Kupfer- und Messingwarenfabrik Louis Opländer, the company has almost 70 branches worldwide and over 6,200 employees.
Turnover amounted to 1,021.4 million EUR in 2010. International recognition has increased rapidly since the company became a European limited liability company (SE) in 2008. Wilo pumps and systems set global standards for efficiency and technical performance: with high-efficiency solutions for all applications in the segments.
Product category
Building Services. Pumps and pump systems for heating, air conditioning, cooling, pressure boosting, water supply and sewage disposal in domestic households, rented accommodation, administrative and commercial buildings.
Standard glanded pumps Series Wilo-CronoNorm-NLG
Design Baseplate pump with axial suction
Product category Standard glanded pumps Series Wilo-CronoNorm-NL Wilo-VeroNorm-NPG
Design Single-stage low-pressure centrifugal pump with axial suction, in accordance with EN 733 and ISO 5199, mounted on baseplate.
Application • Pumping of clean or slightly soiled water (max. 20 ppm) without solid matter for water circulation, transfer and pressure boosting • For pumping cold and hot water (according to VDI 2035) without abrasive matter in • heating, cold water and cooling water installations • Applications in municipal water supply, irrigation, building services, general industry, power stations, etc.
Application • Pumping clean or slightly contaminated water (max. 20 ppm) without solid matter for circulation, transfer and pressure boosting purposes. • For pumping heating water in accordance with VDI 2035, water/glycol mixtures, cooling/cold water and process water. • For applications in municipal water supply, irrigation, building services, industry, power stations etc.
Q max. 1,650 m³/h
Q max. 3,000 m³/h
H max. 103 m
H max. 140 m
Technical data • Permitted temperature range -20 °C to +120 °C • Mains connection 3~400 V, 50 Hz • Protection class IP 55 • Nominal diameters DN 150 to DN 300 • Max. operating pressure 16 bar
Technical data • Perm. temperature range -20 °C to +140 °C • Mains connection 3~400 V, 50 Hz • Protection class IP 55 • Nominal diameter on suction side DN 50 to DN 500 • Nominal diameter on pressure side DN 32 to DN 500 • Maximum operating pressure: depending on type and application up to 16 bar
Equipment/function • Single-stage horizontal spiral housing pump with bearing bracket and replaceable stationary wear rings in process construction • Shaft sealing by means of mechanical seals according to EN 12756 or stuffing box packing • Spiral housing with directly cast pump feet. Bearing of the pump shaft by means of grease-lubricated grooved ball bearings • Shaft coupling with intermediate sleeve
Equipment/function Single-stage low-pressure centrifugal pump in monobloc design with coupling, coupling protection, motor and baseplate • Mechanical seal or stuffing box • Wilo factory motor or ATB motor Materials: • Pump housing: EN-GJL-250 • Impeller: EN-GJL-250 • Shaft: 1.4028
Product category Packaged pressurisation units Series Wilo-Comfort Series P135, P235, P160, P260, P180, P280
Product Information 5 ¼ turn mini ball valves
Product category Control devices Series Wilo-CC-HVAC system Wilo-CCe-HVAC system Wilo-VR-HVAC system
Design -
Pipework ½” in brass and braided flexible hoses ¼” in brass and nylon tubing Electrical supply Input supply 230v/1ph/50Hz
Application Switchgears for controlling 1 to 6 pumps
Volt free contact Max 5A at 230Vac Switching Volt free contact Max 10A at 230Vac Comfort Controller The comfort controller works on a closed loop pressure control via an analogue pressure transducer and an electronic micro processor ensuring accurate measurement and feed back of system condition. The control philosophy allows the duty pump to run, ensuring the cold fill pressure is met. 2 pump models will rotate the duty automatically between both pumps ensuring even wear; if the duty pump fails the standby pump will start automatically.
Q max. H max. -
To ensure efficient operation of the sealed system the comfort controller also monitors the number of pump starts and changes in pressure providing excess starts or system leak alarms if operating out of the standard parameters Features Main control PCB Display PCB Pressure Transducer Flexible hose c/w wingnuts ½” non-return valve 1.2” inlet ball float valve 4” float to suit above Float switch
Technical data -
Equipment/function Wilo-CC-HVAC System: • Comfort control system for 1 to 6 pumps switched in parallel, with fixed speed Wilo-CCe-HVAC system: • Comfort control system for a fully automatic control of 1 to 6 pumps with integrated electronics/speed control or activation of external frequency converters Wilo-VR-HVAC System: • Vario controller for 1 to 4 pumps switched in parallel, with integrated speed control
Materials: • Pump housing and pressure cover: ENGJS-500-7 • Bearing bracket: EN-GJL-250 • Impeller: EN-GJL-250 (special version: G-CuSn10) • Shaft: 1.4028 • Stationary wear rings: G-CuSn10 • Mechanical seal: AQ1EGG (other mechanical seals on request) Special features • Motors in IE2 technology with higher efficiency as standard • Reduced life cycle costs due to optimised efficiency • Bidirectional mechanical seal with forced flushing • Replaceable stationary wear rings • Low NPSH-values, best cavitation properties • High availability of IEC standard motors Worldwide
Special features • Motors with higher efficiency as standard; from 0.75 kW nominal motor power motors with IE2 technology • Other materials and versions on request
Special features • Special versions on request
Information Online catalogue www.wilo.com
Information Online catalogue www.wilo.com
Information Online catalogue www.wilo.com Building Services catalogue, Heating, Air-Conditioning, Cooling
17
Product category Series Wilo-Hydroplus-E (EBMS 2G)
Pumps Horizontal and Vertical multi stage design of stainless steel construction, WRC approved. Motor Totally enclosed fan cooled (TEFC), IP54, class F, 400 volts, three phase, direct on line (DOL) starting via pump mounted inverter Inverter Each pump has an inbuilt inverter, giving maximum reliability and flexibility. Each inverter has a LCD providing status of pump (on/off/faults), each inverter is equipped with dry running protection. Pipe Work Stainless steel 14571, sized in accordance with the overall hydraulic performance of the unit. Valves DVGW certificated nickel-plated isolation and non-return valves. Pressure Sensor Heavy duty piezoresistive type transducers (4-20ma). Accumulator 1 x 8 litre MWP 16 bar, WRc approved c/w through flow shutoff valve for testing and draining. Control Panel ABS enclosure, IP54 protection class with isolator and fused protection per pump. The EBMS control board is fitted inside inverter no.1. The control board allows fully automatic control upto a maximum of 3 pumps in parallel. The set point can be easily adjusted via a potentiometer mounted on the control board. Design Max working Pressure: MHIE: 10 Bar MVIE: 16 Bar Voltage: 400V/3PH/50HZ Protection Index: IP54 EMC Compliance: EN61000-6-2/3
Product category Series Wilo-Comfort-Vario COR- MHI/VR
Pumps Horizontal multi stage design of stainless steel construction, WRC approved. Motor Totally enclosed fan cooled (TEFC), IP54, class F, 230 volts, three phase, direct on line (DOL) starting via panel mounted inverter. Inverter Each pump has a dedicated panel mounted inveter, giving maximum reliability and flexibility. The inverters typically employed are panel mounted 6 pulse PWM type inverter. Pipe Work Stainless steel 14571, sized in accordance with the overall hydraulic performance of the unit. Valves DVGW certificated nickel-plated isolation and non-return valves. Pressure Sensor Heavy duty piezoresistive type transducers (4-20ma). Accumulator 1 x 8 litre MWP 16 bar, WRc approved c/w through flow shutoff valve for testing and draining. Control Panel VR-230V central control unit of fully electronic modular design for automatic control of a maximum of 3parallel pumps, which contain integrated frequency converters for the speed control. Sheet steel enclosure, IP54 protection class, with door interlocked isolator, LC display, access to operation control parameters via a single dial/ pushbutton. Design Max working 10 Bar Voltage: 230V/1PH/50Hz Protection Index: IP54 EMC Compliance: EN61000-6-2/3
3URGXFWFDWHJRU\ 0XOWLSXPSSUHVVXUHERRVWLQJV\VWHPV ZLWKVSHHGFRQWUROOHGSXPSV 6HULHV :LOR&RPIRUW9DULR&250+,(Ë95 :LOR&RPIRUW19DULR&2509,6(Ë95 :LOR&RPIRUW9DULR&2509,(Ë95 :LOR&RPIRUW9DULR&25+HOL[9(Ë 'HVLJQ 3UHVVXUHERRVWLQJV\VWHPZLWKWR QRQVHOISULPLQJVWDLQOHVVVWHHOKLJK SUHVVXUHPXOWLVWDJHFHQWULIXJDOSXPSV VZLWFKHGLQSDUDOOHOZLWKLQWHJUDWHG VSHHGFRQWURO
$SSOLFDWLRQ )RUIXOO\DXWRPDWLFZDWHUVXSSO\ DQGSUHVVXUHERRVWLQJLQUHVLGHQWLDO FRPPHUFLDODQGSXEOLFEXLOGLQJVKRWHOV KRVSLWDOVGHSDUWPHQWVWRUHVDQGIRU LQGXVWULDOV\VWHPV Ê )RUSXPSLQJSRWDEOHZDWHUDQGSURFHVV ZDWHUFRROLQJZDWHUZDWHUIRUILUH ILJKWLQJRURWKHUVHUYLFHZDWHU
4PD[ bPåK +PD[ bP 7HFKQLFDOGDWD Ê 0DLQVFRQQHFWLRQab9b+] GHSHQGLQJRQW\SHDOVRab9 b+] Ê )OXLGWHPSHUDWXUHPD[bo& Ê 2SHUDWLQJSUHVVXUHbEDU Ê ,QOHWSUHVVXUHbEDU Ê 3URWHFWLRQFODVV,3b
(TXLSPHQWIXQFWLRQ Ê WRSXPSVSHUV\VWHP Ê &RQWLQXRXVFRQWURORSHUDWLRQGXH WRSXPSVZLWKLQWHJUDWHGIUHTXHQF\ FRQYHUWHUV Ê &RPSRQHQWVWKDWFRPHLQFRQWDFWZLWK IOXLGDUHFRUURVLRQUHVLVWDQW Ê *DOYDQLVHGEDVHIUDPHZLWKKHLJKW DGMXVWDEOHYLEUDWLRQGDPSHUVIRU LQVXODWLRQDJDLQVWVWUXFWXUHERUQHQRLVH Ê 3LSHZRUNLQVWDLQOHVVVWHHO Ê *HDURSHUDWHGVKXWRIIEDOOFRFN DQQXODUVKXWRIIYDOYHRQHYHU\SXPS RQVXFWLRQDQGSUHVVXUHVLGHV Ê 1RQUHWXUQYDOYHRQSUHVVXUHVLGH Ê 'LDSKUDJPSUHVVXUHYHVVHObO31 RQSUHVVXUHVLGH Ê 3UHVVXUHVHQVRURQGLVFKDUJHVLGH 6SHFLDOIHDWXUHV Ê &RPSDFWV\VWHPZLWKH[FHOOHQWYDOXHIRU PRQH\GXHKLJKSUHVVXUHPXOWLVWDJH FHQWULIXJDOSXPSVZLWKLQWHJUDWHG IUHTXHQF\FRQYHUWHUV Ê 6XSHUSURSRUWLRQDOO\ODUJHFRQWUROUDQJH Ê ,QWHJUDWHGIXOOPRWRUSURWHFWLRQYLD37& Ê ,QWHJUDWHGGU\UXQQLQJGHWHFWLRQZLWK DXWRPDWLFFXWRXWLQHYHQWRIORZZDWHU YLDSHUIRUPDQFHFKDUDFWHULVWLFVRIWKH PRWRUFRQWUROHOHFWURQLFV Ê 6HULHVZLWK+HOL[9ZLWK,(PRWRUV )RUV\VWHPVZLWK09,6(SXPSV Ê 9LUWXDOO\QRLVHOHVVV\VWHPGXHWRD JODQGOHVVKLJKSUHVVXUHPXOWLVWDJH FHQWULIXJDOSXPS Ê 8SWRG% $ TXLHWHUWKDQ FRQYHQWLRQDOV\VWHPVZLWKFRPSDUDEOH K\GUDXOLFRXWSXW ,QIRUPDWLRQ 2QOLQHFDWDORJXHZZZZLORFRP %XLOGLQJ6HUYLFHVFDWDORJXH:DWHU6XSSO\
Product category Series CAT5 Booster Set
Heating, air-conditioning, cooling.
Pressure boosting.
Sewage disposal.
Wilo-Stratos high-efficiency pump for heating, air-conditioning and cooling worldwide.
Wilo pressure boosting systems with Helix high-pressure multistage centrifugal pumps. Constant pressure at every level.
Wilo-DrainLift M, L. Full-value and connection-ready faeces lifting unit for detached and semi-detached houses.
• Non domestic hose union taps • Bin washdown • Garden irrigation • Laboratories • Mortuary and embalming equipment • Butchery and slaughter-house equipment Description The sets are provided with a single fixed speed pump, MHI or a variable speed pump, MHIE. The MHI sets are controlled via pressure switch, DOL motor starter and run on timer. The MHIE sets are controlled via pressure transducer and motor mounted inverter. All are complete with a non return valve, pressure gauge, 8lt vessel and outlet isolation valve and tank draincock. The water level in the break tank is controlled via ½” BS1212 equilibrium float valve which provides a flow rate of 1.2 l/s at a minimum inlet pressure of 1 bar. Low level protection is provided via side mounted float switch. Operation The booster set monitors the system pressure and as demand increases the pressure will fall and the pump will start and continue to run, until demand has stopped and pressure increases to the set point. The fixed speed booster sets have a run on timer that overrides the pressure switch for a set period to minimise the number of starts per hour. Connections Inlet: ½” BSP Outlet: 1” BSP BMS: Volt free connection for pump fault
5
Highest efficiency at the lowest life cycle costs. The economic supply to buildings increasingly demands the use of innovative systems from optimally configured components. Whether in a detached or semidetached home, industrial, commercial or public buildings, hospitals or hotels: Wilo assures everyone with its high-efficiency pumps and systems for heating systems, air conditioning, water supply and sewage disposal. Many processes within Facility Management can be controlled and regulated by building automation systems conveniently. Wilo high-efficiency pumps and Wilo pump systems with electronic controls offer the best technological foundations anywhere in the market. They are at home in any system and can be integrated optimally into building automation. They offer exceptional possibilities for saving on power and upkeep costs. An investment, that will soon be offset and more than pay for itself in the long run.
Product category
Wilo Online Catalogue www.wilo.co.uk. Building Services - Commercial.
Product category
Product category
Product category
Vertical, multistage centrifugal pumps Series Wilo-Multivert-MVIE
Single-pump pressure boosting systems Series Wilo-Economy CO-1 MVIS … /ER Wilo-Economy CO-1 MVI … /ER Wilo-Economy CO-1 Helix-V … /CE+
Single-pump pressure boosting systems with speed-controlled pump Series Wilo-Comfort-N-Vario COR-1 MVISE … Wilo-Comfort-Vario COR-1 MHIE … Wilo-Comfort-Vario COR-1 MVIE … Wilo-Comfort-Vario COR-1 Helix-VE … Wilo-SiBoost Smart 1 Helix VE ...
Multi-pump pressure boosting systems Series Wilo-Economy CO 2-4 MHI … /ER Wilo-Comfort-N-CO 2-6 MVIS … /CC Wilo-Comfort-CO 2-6 MVI … /CC Wilo-Comfort-CO 2-6 Helix-V … /CC
Design Non-self-priming multistage pump with integrated frequency converter
Design Water-supply units with a non-selfpriming, high-pressure multistage centrifugal pump
Design Water-supply units with a non-selfpriming, high-pressure multistage centrifugal pump with integrated speed control
Design Pressure boosting system with 2 to 6 nonself-priming, stainless steel, highpressure, multistage centrifugal pumps switched in parallel
Application • Water supply and pressure boosting • Industrial circulation systems • Process engineering • Cooling water circulation systems • Washing and sprinkling systems
Application For fully automatic water supply in inlet mode from the public water supply network or from a break tank • For pumping potable water, process water, cooling water, water for firefighting or other service water
Application For fully automatic water supply in inlet mode from the public water supply network or from a break tank • For pumping potable water, process water, cooling water, water for firefighting or other service water
Application For fully automatic water supply and pressure boosting in residential, commercial and public buildings, hotels, hospitals, department stores and for industrial systems • For pumping potable water and process water, cooling water, water for firefighting or other service water
Q max. 145 m³/h
Q max. 135 m³/h
Q max. 97 m³/h
Q max. 800 m³/h
H max. 245 m
H max. 160 m
H max. 150 m
H max. 160 m
Technical data • Fluid temperature -15 to +120 °C • Operating pressure max. 16 bar/25 bar • Inlet pressure max. 10 bar • Protection class IP 54 or IP 55
Technical data • Mains connection 3~230 V / 400 V, 50 Hz (other versions on request) • Fluid temperature max. 50 °C • Operating pressure 10/16 bar • Inlet pressure 6/10 bar • Switching pressure stages 6 / 10 / 16 bar • Protection class IP 41
Technical data • Mains connection 3~400 V, 50 Hz • Fluid temperature max. 50 °C • Operating pressure 10/16 bar • Inlet pressure 6/10 bar • Protection class IP 44
Technical data • Mains connection 3~230 V / 400 V, 50 Hz • Fluid temperature max. 50 °C • Operating pressure 10/16 bar • Inlet pressure 6/10 bar • Protection class IP 54
Equipment/function • Stainless steel pump in in-line design • PN 16 with oval flanges • PN 16/25 with DIN round flanges, Victaulic connections depending on pump type • Single-phase or three-phase current standard motor • Integrated frequency converter • Integrated thermal motor protection • Protection against low water level
Equipment/function • 1 pump of the MVIS, MVI or Helix-V series • Components that come in contact with fluid are corrosion-resistant • Base frame made of stainless steel 1.4301 with height-adjustable vibration dampers for insulation against structure- borne noise • Pipework in stainless steel 1.4571 • Check valve, on pressure side • Non-return valve, on pressure side • Diaphragm pressure vessel 8 l, PN 16, on pressure side
Equipment/function • 1 pump of the MVIE, Helix-VE or MVISE series with integrated frequency converter • All parts that come in contact with the fluid are corrosion-resistant • Pipework in stainless steel 1.4571 • Check valve, on pressure side • Non-return valve, on pressure side • Diaphragm pressure vessel 8 l, PN 16, on pressure side
Equipment/function • 2 to 4 or 2 to 6 pumps per system • Components that come in contact with fluid are corrosion-resistant • Galvanised base frame with heightadjustable vibration dampers for insulation against structure-borne noise • Pipework in stainless steel 1.4571 • Gear-operated shut-off ball cock/ annular shut-off valve on every pump, on suction and pressure sides • Non-return valve, on pressure side • Diaphragm pressure vessel 8 l, PN 16, on pressure side • Pressure sensor, on discharge side
Special features • Easy commissioning • Full motor protection • Large control range • MVIE 2..-16..-6 All parts that come in contact with the fluid made of stainless steel 1.4301 (AISI 304) or 14404 (AISI 316L) • MVIE 16..-95.. depending on pump type in stainless steel 1.4404 (AISI 316L) or 1.4301 (AISI 304) with pump housing made of grey cast iron EN-GJL-250, cataphoretic coating • All relevant components have KTW and WRAS approval
Special features For systems with MVIS pump • Virtually noiseless system due to a glandless, high-pressure, multistage centrifugal pump • Up to 20 dB (A) quieter than conventional systems with comparable hydraulic output • Operationally reliable due to the combination with the ER-1 control device For systems with Helix-V pump • IE2 standard motors • Efficiency-optimised, laser-welded 2D/3D hydraulics • User-friendly mechanical seal with cartridge, equipped with a standard seal for easy maintenance • Operationally reliable due to the combination CE+ control device
Special features • For systems with MVISE pump • Virtually noiseless system due to the use of glandless, stainless steel, highpressure, multistage centrifugal pumps with integrated frequency converter • Up to 20 dB[A] quieter than conventional systems with comparable hydraulic output For systems with Helix-VE pump • IE2 standard motors • Efficiency-optimised, laser-welded 2D/3D hydraulics • User-friendly mechanical seal with cartridge, equipped with a standard seal for easy maintenance
Special features • Compact system in accordance with the requirements of DIN 1988 • 2 to 4 or 2 to 6 high-pressure, multistage centrifugal pumps switched in parallel • Easily adjustable and operationally reliable due to integrated control devices • Series with Helix-V with IE2 motors For systems with MVIS pumps • Virtually noiseless system due to a glandless, high-pressure, multistage centrifugal pump • Up to 20 dB (A) quieter than conventional systems with comparable hydraulic output
Information Online catalogue www.wilo.com Building Services catalogue, Water Supply
Information Online catalogue www.wilo.com Building Services catalogue, Water Supply
Information Online catalogue www.wilo.com Building Services catalogue, Water Supply
Information Online catalogue www.wilo.com Building Services catalogue, Water Supply
15
Product category Vertical, multistage centrifugal pumps Series Wilo-Helix-V
Product category Vertical, multistage centrifugal pumps Series Wilo-Helix-VE
Product category Vertical, multistage centrifugal pumps Series Wilo-Helix EXCEL
Product category Vertical, multistage centrifugal pumps Series Wilo-Multivert MVI
Design Non-self-priming multistage pump
Design Non-self-priming multistage pump with integrated frequency converter
Design Non-self-priming multistage pump with EC motor with integrated high-efficiency drive
Design Non-self-priming multistage pump
Application • Water supply and pressure boosting • Industrial circulation systems • Process water • Cooling water circulation systems • Fire extinguishing systems • Washing systems • Irrigation
Application • Water supply and pressure boosting • Industrial circulation systems • Process water • Cooling water circulation systems • Washing systems • Irrigation
Application • Water supply and pressure boosting • Industrial circulation systems • Process water • Cooling water circulation systems • Fire extinguishing systems • Washing systems • Irrigation
Application • Water supply and pressure boosting • Fire extinguishing systems • Boiler feed • Industrial circulation systems • Process engineering • Cooling water circulation systems • Washing and sprinkling systems
Q max. 80 m³/h
Q max. 80 m³/h
Q max. 58 m³/h
Q max. 155 m³/h
H max. 250 m
H max. 240 m
H max. 243 m
H max. 240 m
Technical data • Fluid temperature -30 to +120 °C • Operating pressure max. 16/25 bar • Inlet pressure max. 10 bar • Protection class IP 55 • PN 16 and PN 25 with loose round flanges
Technical data • Fluid temperature -20 to +120 °C • Operating pressure max. 16/25 bar • Inlet pressure max. 10 bar • Protection class IP 55 • PN 16 and PN 25 with loose round flanges
Technical data • Fluid temperature: -20 to +120 °C with EPDM (-10 to +90 °C with FKM gasket) • Operating pressure max.: 16/25 bar • Protection class: IP 55 • Helix EXCEL 2-16: PN 16 with oval flanges and PN 25 with round flanges in accordance with ISO 2531 and ISO 7005 • Helix EXCEL 22-36: PN 25 with round flanges in accordance with ISO 2531 and ISO 7005
Technical data • Fluid temperature -15 to +120 °C • Operating pressure max. 16/25 bar • Inlet pressure max. 10 bar • Protection class IP 55
Equipment/function • Impellers, stage chambers and pump housing stainless steel 1.4301/1.4404 (AISI304L/AISI316L) • Versions with 1.44xx stainless steel designed for aggressive fluids • Versions --PN 16 with oval flanges and PN 25 with round DIN flanges --Helix V22, 32, 52 PN 16 and PN 25 with round loose flanges in accordance with ISO 2531 and ISO 7005 • IE2/IEC standard three-phase AC motor
Equipment/function • Impellers, stage chambers and pump housing stainless steel 1.4301/1.4404 (AISI304L/AISI316L) • Versions with 1.44xx stainless steel designed for aggressive fluids • PN 16 and PN 25 versions with round loose flanges in accordance with ISO 2531 and ISO 7005 • IE2/IEC standard three-phase AC motor • Integrated frequency converter
Equipment/function • Impellers, diffusors and stage housings made of stainless steel • Versions in 1.44xx stainless steel for aggressive fluids • High-efficiency EC motor (degrees of efficiency higher than the IE4 limit values acc. to IEC TS 60034-31 Ed.1) • Optional interfaces for BUS communication via plug-in IF-modules
Equipment/function • Stainless steel pump in in-line design • Versions --MVI 1.. up to 16..-6 PN 16 with oval flanges and PN 25 with round DIN flanges --MVI 16.. to 95.. PN 16/PN 25 with round DIN flanges --Victaulic connections (PN 25) depending on pump type • IE2/IEC standard three phase motor, 2-pole, AC or DC version. Single-phase AC motor with integrated thermal motor protection
Special features • Efficiency-optimised, laser-welded 2D/3D high-efficiency hydraulics • Easy pump replacement without pipe modification. Due to the modular pump housing, Helix pumps can be installed in existing pipes. • User-friendly mechanical seal with cartridge, equipped with a standard seal for easy maintenance • Potable water approval according to ACS/KTW/WRAS for all parts that come in contact with the fluid
Special features • Efficiency-optimised, laser-welded 2D/3D high-efficiency hydraulics • Easy pump replacement without pipe modification. Due to the modular pump housing, Helix pumps can be installed in existing pipes. • User-friendly mechanical seal with cartridge, equipped with a standard seal for easy maintenance • Potable water approval according to ACS/ KTW/WRAS for all parts that come in contact with the fluid
Special features • Efficiency-optimised, laser-welded 2D/3D high-efficiency hydraulics • Built-in electronic control thanks to the High Efficiency Drive with large control range • Choice of various different control modes (speed control, constant pressure, and PID). • User-friendly mechanical seal with cartridge, equipped with a standard seal for easy maintenance • The spacer coupling enables the mechanical seal to be replaced without dismantling the motor (from 7.5 kW and higher) • Intermediate bearings (Al203/CW) ensure a long service life • WRAS/KTW/ACS approval for all parts that come in contact with the fluid (EPDM version)
Special features • MVI 1..-16..-6 All parts that come in contact with the fluid made of stainless steel 1.4301 (AISI 304) or 14404 (AISI 316L) • MVI 32..-95.. depending on pump type in stainless steel 1.4404 (AISI 316L) or 1.4301 (AISI 304) with pump housing made of grey cast iron EN-GJL-250, cataphoretic coating • All relevant components have KTW and WRAS approval
Information Online catalogue www.wilo.com Building Services catalogue, Water Supply
Information Online catalogue www.wilo.com Building Services catalogue, Water Supply
Information Online catalogue www.wilo.com
Information Online catalogue www.wilo.com Building Services catalogue, Water Supply
Range Guide. Building Services. 7
Heating, air-conditioning, cooling. Pumps, pump systems and accessories for heating, air-conditioning and secondary hot water. > High-efficiency, energy-saving and standard pumps in glandless and glanded pump versions > Pump regulators and controls, modules for building automation and switchgears > Lifting units for condensates Water supply. Pumps, pump systems and accessories for > Rainwater utilisation > Domestic water supply > Commercial water supply and pressure boosting > Raw water intake Drainage and sewage. Pumps, pump systems and accessories for > Wastewater collection and transport > Drainage > Pressure drainage
Product category Glandless Premium high-efficiency pumps Series Wilo-Stratos PICO
Product category Glandless Standard high-efficiency pumps Series Wilo-Yonos PICO
Product category Glandless Premium high-efficiency pumps Series Wilo-Stratos Wilo-Stratos-D
Product category Glanded high-efficiency pumps in in-line design Series Wilo-Stratos GIGA
Design Glandless circulation pump with threaded connection, EC motor and automatic power adjustment.
Design Glandless circulation pump with threaded connection, EC motor and automatic power adjustment.
Design Glandless circulation pump with threaded connection or flange connection, EC motor and automatic power adjustment.
Design High-efficiency inline pump with EC motor and electronic duty adaptation in glanded construction. Version as singlestage low-pressure centrifugal pump with flange connection and mechanical shaft seal.
Application All hot water heating systems, airconditioning applications, industrial circulation systems.
Application All hot water heating systems, airconditioning applications, industrial circulation systems.
Application Hot-water heating systems of all kinds, air-conditioning systems, closed cooling circuits, industrial circulation systems
Application Pumping of heating water (acc. to VDI 2035), cold water and water/glycol mixtures without abrasive substances in heating, cold water and cooling systems.
Q max. 4 m³/h
Q max. 3.5 m³/h
Q max. 61 m³/h
Q max. 44 m³/h
H max. 6.0 m
H max. 6.0 m
H max. 13 m
H max. 52 m
Technical data • Fluid temperature +2 °C to +110 °C • Mains connection 1~230 V, 50 Hz • Protection class IP X4D • Threaded connection Rp ½, Rp 1 and Rp 1¼ • Max. operating pressure 10 bar
Technical data • Fluid temperature +10 °C to +110 °C • Mains connection 1~230 V, 50 Hz • Protection class IP X2D • Threaded connection Rp ½, Rp 1 and Rp 1¼ • Max. operating pressure 6 bar
Technical data • Perm. temperature range -10 °C to +110 °C • Mains connection 1~230 V, 50 Hz • Protection class IP X4D • Nominal diameter Rp 1 to DN 100 • Max. operating pressure screw-end pumps 10 bar • Flange-end pumps 6/10 bar / 6 bar (special version: 10 bar or 16 bar
Technical data • Permitted temperature range of the fluid -20 °C to +140 °C • Mains connection: 3~440 V (±10 %), 50 Hz/60 Hz 3~400 V (±10 %), 50 Hz/60 Hz 3~380 V (-5 %/+10 %), 50 Hz/60 Hz • Protection class IP 55 • Max. operating pressure 16 bar to +120 °C, 13 bar to +140 °C
Equipment/function • Control mode: Δp-c and Δp-v, Dynamic Adapt control function combinied with Δp-v • Automatic setback operation • Automatic venting routine • Automatic deblocking function • Red-button technology for simple operation • Display indication of current power consumption in W and accumulated electricity consumption in kWh • Reset function for resetting the electricity meter • Reset function for resetting to the factory settings • Blocking current-proof motor • Particle filter • Quick electrical connection with WiloConnector • Options: -Design with bronze pump housing for use in underfloor heating systems, -Versions with short port-to-port length 130 mm
Equipment/function • Control mode: Δp-c and Δp-v • Setting the pump output (delivery head) • Automatic venting function • Automatic deblocking function • Red-button for simple operation • LED display to adjust the setpoint and to show the current consumption in watts • Blocking current-proof motor • Particle filter • Quick electrical connection with WiloConnector • Options: -Versions with short port-to-port length 130 mm
Equipment/function • EC motor • Pre-selectable control modes Δp-c, Δp-v, Δp-T • Automatic setback operation for additional savings potential • Dual pump management • Red-button technology for simple operation • Graphical pump display with rotating display • Remote control via infrared interface (IR-Module/IR-Monitor) • Integrated motor protection • System expansion by means of retrofittable interface modules for communication: Modbus, BACnet, CAN, LON, PLR etc. • Pump housing with cataphoretic coating • Combination flanges PN 6/PN 10 (for DN 32 to DN 65) • Thermal insulation shells as standard for heating applications
Equipment/function Single-stage, low-pressure centrifugal pump in in-line design with • Mechanical seal • Flange connection • Lantern • Coupling • EC motor with electronic power adjustment
Special features • Energy efficiency index (EEI) Commercial water supply and pressure boosting > Raw water intake Drainage and sewage. Pumps, pump systems and accessories for > Wastewater collection and transport > Drainage > Pressure drainage
Product category
Wilo Online Catalogue www.wilo.co.uk. Building Services - Commercial.
Product category
Product category
Product category
Vertical, multistage centrifugal pumps Series Wilo-Multivert-MVIE
Single-pump pressure boosting systems Series Wilo-Economy CO-1 MVIS … /ER Wilo-Economy CO-1 MVI … /ER Wilo-Economy CO-1 Helix-V … /CE+
Single-pump pressure boosting systems with speed-controlled pump Series Wilo-Comfort-N-Vario COR-1 MVISE … Wilo-Comfort-Vario COR-1 MHIE … Wilo-Comfort-Vario COR-1 MVIE … Wilo-Comfort-Vario COR-1 Helix-VE … Wilo-SiBoost Smart 1 Helix VE ...
Multi-pump pressure boosting systems Series Wilo-Economy CO 2-4 MHI … /ER Wilo-Comfort-N-CO 2-6 MVIS … /CC Wilo-Comfort-CO 2-6 MVI … /CC Wilo-Comfort-CO 2-6 Helix-V … /CC
Design Non-self-priming multistage pump with integrated frequency converter
Design Water-supply units with a non-selfpriming, high-pressure multistage centrifugal pump
Design Water-supply units with a non-selfpriming, high-pressure multistage centrifugal pump with integrated speed control
Design Pressure boosting system with 2 to 6 nonself-priming, stainless steel, highpressure, multistage centrifugal pumps switched in parallel
Application • Water supply and pressure boosting • Industrial circulation systems • Process engineering • Cooling water circulation systems • Washing and sprinkling systems
Application For fully automatic water supply in inlet mode from the public water supply network or from a break tank • For pumping potable water, process water, cooling water, water for firefighting or other service water
Application For fully automatic water supply in inlet mode from the public water supply network or from a break tank • For pumping potable water, process water, cooling water, water for firefighting or other service water
Application For fully automatic water supply and pressure boosting in residential, commercial and public buildings, hotels, hospitals, department stores and for industrial systems • For pumping potable water and process water, cooling water, water for firefighting or other service water
Q max. 145 m³/h
Q max. 135 m³/h
Q max. 97 m³/h
Q max. 800 m³/h
H max. 245 m
H max. 160 m
H max. 150 m
H max. 160 m
Technical data • Fluid temperature -15 to +120 °C • Operating pressure max. 16 bar/25 bar • Inlet pressure max. 10 bar • Protection class IP 54 or IP 55
Technical data • Mains connection 3~230 V / 400 V, 50 Hz (other versions on request) • Fluid temperature max. 50 °C • Operating pressure 10/16 bar • Inlet pressure 6/10 bar • Switching pressure stages 6 / 10 / 16 bar • Protection class IP 41
Technical data • Mains connection 3~400 V, 50 Hz • Fluid temperature max. 50 °C • Operating pressure 10/16 bar • Inlet pressure 6/10 bar • Protection class IP 44
Technical data • Mains connection 3~230 V / 400 V, 50 Hz • Fluid temperature max. 50 °C • Operating pressure 10/16 bar • Inlet pressure 6/10 bar • Protection class IP 54
Equipment/function • Stainless steel pump in in-line design • PN 16 with oval flanges • PN 16/25 with DIN round flanges, Victaulic connections depending on pump type • Single-phase or three-phase current standard motor • Integrated frequency converter • Integrated thermal motor protection • Protection against low water level
Equipment/function • 1 pump of the MVIS, MVI or Helix-V series • Components that come in contact with fluid are corrosion-resistant • Base frame made of stainless steel 1.4301 with height-adjustable vibration dampers for insulation against structure- borne noise • Pipework in stainless steel 1.4571 • Check valve, on pressure side • Non-return valve, on pressure side • Diaphragm pressure vessel 8 l, PN 16, on pressure side
Equipment/function • 1 pump of the MVIE, Helix-VE or MVISE series with integrated frequency converter • All parts that come in contact with the fluid are corrosion-resistant • Pipework in stainless steel 1.4571 • Check valve, on pressure side • Non-return valve, on pressure side • Diaphragm pressure vessel 8 l, PN 16, on pressure side
Equipment/function • 2 to 4 or 2 to 6 pumps per system • Components that come in contact with fluid are corrosion-resistant • Galvanised base frame with heightadjustable vibration dampers for insulation against structure-borne noise • Pipework in stainless steel 1.4571 • Gear-operated shut-off ball cock/ annular shut-off valve on every pump, on suction and pressure sides • Non-return valve, on pressure side • Diaphragm pressure vessel 8 l, PN 16, on pressure side • Pressure sensor, on discharge side
Special features • Easy commissioning • Full motor protection • Large control range • MVIE 2..-16..-6 All parts that come in contact with the fluid made of stainless steel 1.4301 (AISI 304) or 14404 (AISI 316L) • MVIE 16..-95.. depending on pump type in stainless steel 1.4404 (AISI 316L) or 1.4301 (AISI 304) with pump housing made of grey cast iron EN-GJL-250, cataphoretic coating • All relevant components have KTW and WRAS approval
Special features For systems with MVIS pump • Virtually noiseless system due to a glandless, high-pressure, multistage centrifugal pump • Up to 20 dB (A) quieter than conventional systems with comparable hydraulic output • Operationally reliable due to the combination with the ER-1 control device For systems with Helix-V pump • IE2 standard motors • Efficiency-optimised, laser-welded 2D/3D hydraulics • User-friendly mechanical seal with cartridge, equipped with a standard seal for easy maintenance • Operationally reliable due to the combination CE+ control device
Special features • For systems with MVISE pump • Virtually noiseless system due to the use of glandless, stainless steel, highpressure, multistage centrifugal pumps with integrated frequency converter • Up to 20 dB[A] quieter than conventional systems with comparable hydraulic output For systems with Helix-VE pump • IE2 standard motors • Efficiency-optimised, laser-welded 2D/3D hydraulics • User-friendly mechanical seal with cartridge, equipped with a standard seal for easy maintenance
Special features • Compact system in accordance with the requirements of DIN 1988 • 2 to 4 or 2 to 6 high-pressure, multistage centrifugal pumps switched in parallel • Easily adjustable and operationally reliable due to integrated control devices • Series with Helix-V with IE2 motors For systems with MVIS pumps • Virtually noiseless system due to a glandless, high-pressure, multistage centrifugal pump • Up to 20 dB (A) quieter than conventional systems with comparable hydraulic output
Information Online catalogue www.wilo.com Building Services catalogue, Water Supply
Information Online catalogue www.wilo.com Building Services catalogue, Water Supply
Information Online catalogue www.wilo.com Building Services catalogue, Water Supply
Information Online catalogue www.wilo.com Building Services catalogue, Water Supply
15
Product category Series Wilo-Hydroplus-E (EBMS 2G)
Pumps Horizontal and Vertical multi stage design of stainless steel construction, WRC approved. Motor Totally enclosed fan cooled (TEFC), IP54, class F, 400 volts, three phase, direct on line (DOL) starting via pump mounted inverter Inverter Each pump has an inbuilt inverter, giving maximum reliability and flexibility. Each inverter has a LCD providing status of pump (on/off/faults), each inverter is equipped with dry running protection. Pipe Work Stainless steel 14571, sized in accordance with the overall hydraulic performance of the unit. Valves DVGW certificated nickel-plated isolation and non-return valves. Pressure Sensor Heavy duty piezoresistive type transducers (4-20ma). Accumulator 1 x 8 litre MWP 16 bar, WRc approved c/w through flow shutoff valve for testing and draining. Control Panel ABS enclosure, IP54 protection class with isolator and fused protection per pump. The EBMS control board is fitted inside inverter no.1. The control board allows fully automatic control upto a maximum of 3 pumps in parallel. The set point can be easily adjusted via a potentiometer mounted on the control board. Design Max working Pressure: MHIE: 10 Bar MVIE: 16 Bar Voltage: 400V/3PH/50HZ Protection Index: IP54 EMC Compliance: EN61000-6-2/3
Product category Series Wilo-Comfort-Vario COR- MHI/VR
Pumps Horizontal multi stage design of stainless steel construction, WRC approved. Motor Totally enclosed fan cooled (TEFC), IP54, class F, 230 volts, three phase, direct on line (DOL) starting via panel mounted inverter. Inverter Each pump has a dedicated panel mounted inveter, giving maximum reliability and flexibility. The inverters typically employed are panel mounted 6 pulse PWM type inverter. Pipe Work Stainless steel 14571, sized in accordance with the overall hydraulic performance of the unit. Valves DVGW certificated nickel-plated isolation and non-return valves. Pressure Sensor Heavy duty piezoresistive type transducers (4-20ma). Accumulator 1 x 8 litre MWP 16 bar, WRc approved c/w through flow shutoff valve for testing and draining. Control Panel VR-230V central control unit of fully electronic modular design for automatic control of a maximum of 3parallel pumps, which contain integrated frequency converters for the speed control. Sheet steel enclosure, IP54 protection class, with door interlocked isolator, LC display, access to operation control parameters via a single dial/ pushbutton. Design Max working 10 Bar Voltage: 230V/1PH/50Hz Protection Index: IP54 EMC Compliance: EN61000-6-2/3
3URGXFWFDWHJRU\ 0XOWLSXPSSUHVVXUHERRVWLQJV\VWHPV ZLWKVSHHGFRQWUROOHGSXPSV 6HULHV :LOR&RPIRUW9DULR&250+,(Ë95 :LOR&RPIRUW19DULR&2509,6(Ë95 :LOR&RPIRUW9DULR&2509,(Ë95 :LOR&RPIRUW9DULR&25+HOL[9(Ë 'HVLJQ 3UHVVXUHERRVWLQJV\VWHPZLWKWR QRQVHOISULPLQJVWDLQOHVVVWHHOKLJK SUHVVXUHPXOWLVWDJHFHQWULIXJDOSXPSV VZLWFKHGLQSDUDOOHOZLWKLQWHJUDWHG VSHHGFRQWURO
$SSOLFDWLRQ )RUIXOO\DXWRPDWLFZDWHUVXSSO\ DQGSUHVVXUHERRVWLQJLQUHVLGHQWLDO FRPPHUFLDODQGSXEOLFEXLOGLQJVKRWHOV KRVSLWDOVGHSDUWPHQWVWRUHVDQGIRU LQGXVWULDOV\VWHPV Ê )RUSXPSLQJSRWDEOHZDWHUDQGSURFHVV ZDWHUFRROLQJZDWHUZDWHUIRUILUH ILJKWLQJRURWKHUVHUYLFHZDWHU
4PD[ bPåK +PD[ bP 7HFKQLFDOGDWD Ê 0DLQVFRQQHFWLRQab9b+] GHSHQGLQJRQW\SHDOVRab9 b+] Ê )OXLGWHPSHUDWXUHPD[bo& Ê 2SHUDWLQJSUHVVXUHbEDU Ê ,QOHWSUHVVXUHbEDU Ê 3URWHFWLRQFODVV,3b
(TXLSPHQWIXQFWLRQ Ê WRSXPSVSHUV\VWHP Ê &RQWLQXRXVFRQWURORSHUDWLRQGXH WRSXPSVZLWKLQWHJUDWHGIUHTXHQF\ FRQYHUWHUV Ê &RPSRQHQWVWKDWFRPHLQFRQWDFWZLWK IOXLGDUHFRUURVLRQUHVLVWDQW Ê *DOYDQLVHGEDVHIUDPHZLWKKHLJKW DGMXVWDEOHYLEUDWLRQGDPSHUVIRU LQVXODWLRQDJDLQVWVWUXFWXUHERUQHQRLVH Ê 3LSHZRUNLQVWDLQOHVVVWHHO Ê *HDURSHUDWHGVKXWRIIEDOOFRFN DQQXODUVKXWRIIYDOYHRQHYHU\SXPS RQVXFWLRQDQGSUHVVXUHVLGHV Ê 1RQUHWXUQYDOYHRQSUHVVXUHVLGH Ê 'LDSKUDJPSUHVVXUHYHVVHObO31 RQSUHVVXUHVLGH Ê 3UHVVXUHVHQVRURQGLVFKDUJHVLGH 6SHFLDOIHDWXUHV Ê &RPSDFWV\VWHPZLWKH[FHOOHQWYDOXHIRU PRQH\GXHKLJKSUHVVXUHPXOWLVWDJH FHQWULIXJDOSXPSVZLWKLQWHJUDWHG IUHTXHQF\FRQYHUWHUV Ê 6XSHUSURSRUWLRQDOO\ODUJHFRQWUROUDQJH Ê ,QWHJUDWHGIXOOPRWRUSURWHFWLRQYLD37& Ê ,QWHJUDWHGGU\UXQQLQJGHWHFWLRQZLWK DXWRPDWLFFXWRXWLQHYHQWRIORZZDWHU YLDSHUIRUPDQFHFKDUDFWHULVWLFVRIWKH PRWRUFRQWUROHOHFWURQLFV Ê 6HULHVZLWK+HOL[9ZLWK,(PRWRUV )RUV\VWHPVZLWK09,6(SXPSV Ê 9LUWXDOO\QRLVHOHVVV\VWHPGXHWRD JODQGOHVVKLJKSUHVVXUHPXOWLVWDJH FHQWULIXJDOSXPS Ê 8SWRG% $ TXLHWHUWKDQ FRQYHQWLRQDOV\VWHPVZLWKFRPSDUDEOH K\GUDXOLFRXWSXW ,QIRUPDWLRQ 2QOLQHFDWDORJXHZZZZLORFRP %XLOGLQJ6HUYLFHVFDWDORJXH:DWHU6XSSO\
Product category Series CAT5 Booster Set
Heating, air-conditioning, cooling.
Pressure boosting.
Sewage disposal.
Wilo-Stratos high-efficiency pump for heating, air-conditioning and cooling worldwide.
Wilo pressure boosting systems with Helix high-pressure multistage centrifugal pumps. Constant pressure at every level.
Wilo-DrainLift M, L. Full-value and connection-ready faeces lifting unit for detached and semi-detached houses.
• Non domestic hose union taps • Bin washdown • Garden irrigation • Laboratories • Mortuary and embalming equipment • Butchery and slaughter-house equipment Description The sets are provided with a single fixed speed pump, MHI or a variable speed pump, MHIE. The MHI sets are controlled via pressure switch, DOL motor starter and run on timer. The MHIE sets are controlled via pressure transducer and motor mounted inverter. All are complete with a non return valve, pressure gauge, 8lt vessel and outlet isolation valve and tank draincock. The water level in the break tank is controlled via ½” BS1212 equilibrium float valve which provides a flow rate of 1.2 l/s at a minimum inlet pressure of 1 bar. Low level protection is provided via side mounted float switch. Operation The booster set monitors the system pressure and as demand increases the pressure will fall and the pump will start and continue to run, until demand has stopped and pressure increases to the set point. The fixed speed booster sets have a run on timer that overrides the pressure switch for a set period to minimise the number of starts per hour. Connections Inlet: ½” BSP Outlet: 1” BSP BMS: Volt free connection for pump fault
5
Highest efficiency at the lowest life cycle costs. The economic supply to buildings increasingly demands the use of innovative systems from optimally configured components. Whether in a detached or semidetached home, industrial, commercial or public buildings, hospitals or hotels: Wilo assures everyone with its high-efficiency pumps and systems for heating systems, air conditioning, water supply and sewage disposal. Many processes within Facility Management can be controlled and regulated by building automation systems conveniently. Wilo high-efficiency pumps and Wilo pump systems with electronic controls offer the best technological foundations anywhere in the market. They are at home in any system and can be integrated optimally into building automation. They offer exceptional possibilities for saving on power and upkeep costs. An investment, that will soon be offset and more than pay for itself in the long run.
Product category
Building Services. Pumps and pump systems for heating, air conditioning, cooling, pressure boosting, water supply and sewage disposal in domestic households, rented accommodation, administrative and commercial buildings.
Standard glanded pumps Series Wilo-CronoNorm-NLG
Design Baseplate pump with axial suction
Product category Standard glanded pumps Series Wilo-CronoNorm-NL Wilo-VeroNorm-NPG
Design Single-stage low-pressure centrifugal pump with axial suction, in accordance with EN 733 and ISO 5199, mounted on baseplate.
Application • Pumping of clean or slightly soiled water (max. 20 ppm) without solid matter for water circulation, transfer and pressure boosting • For pumping cold and hot water (according to VDI 2035) without abrasive matter in • heating, cold water and cooling water installations • Applications in municipal water supply, irrigation, building services, general industry, power stations, etc.
Application • Pumping clean or slightly contaminated water (max. 20 ppm) without solid matter for circulation, transfer and pressure boosting purposes. • For pumping heating water in accordance with VDI 2035, water/glycol mixtures, cooling/cold water and process water. • For applications in municipal water supply, irrigation, building services, industry, power stations etc.
Q max. 1,650 m³/h
Q max. 3,000 m³/h
H max. 103 m
H max. 140 m
Technical data • Permitted temperature range -20 °C to +120 °C • Mains connection 3~400 V, 50 Hz • Protection class IP 55 • Nominal diameters DN 150 to DN 300 • Max. operating pressure 16 bar
Technical data • Perm. temperature range -20 °C to +140 °C • Mains connection 3~400 V, 50 Hz • Protection class IP 55 • Nominal diameter on suction side DN 50 to DN 500 • Nominal diameter on pressure side DN 32 to DN 500 • Maximum operating pressure: depending on type and application up to 16 bar
Equipment/function • Single-stage horizontal spiral housing pump with bearing bracket and replaceable stationary wear rings in process construction • Shaft sealing by means of mechanical seals according to EN 12756 or stuffing box packing • Spiral housing with directly cast pump feet. Bearing of the pump shaft by means of grease-lubricated grooved ball bearings • Shaft coupling with intermediate sleeve
Equipment/function Single-stage low-pressure centrifugal pump in monobloc design with coupling, coupling protection, motor and baseplate • Mechanical seal or stuffing box • Wilo factory motor or ATB motor Materials: • Pump housing: EN-GJL-250 • Impeller: EN-GJL-250 • Shaft: 1.4028
Product category Packaged pressurisation units Series Wilo-Comfort Series P135, P235, P160, P260, P180, P280
Product Information 5 ¼ turn mini ball valves
Product category Control devices Series Wilo-CC-HVAC system Wilo-CCe-HVAC system Wilo-VR-HVAC system
Design -
Pipework ½” in brass and braided flexible hoses ¼” in brass and nylon tubing Electrical supply Input supply 230v/1ph/50Hz
Application Switchgears for controlling 1 to 6 pumps
Volt free contact Max 5A at 230Vac Switching Volt free contact Max 10A at 230Vac Comfort Controller The comfort controller works on a closed loop pressure control via an analogue pressure transducer and an electronic micro processor ensuring accurate measurement and feed back of system condition. The control philosophy allows the duty pump to run, ensuring the cold fill pressure is met. 2 pump models will rotate the duty automatically between both pumps ensuring even wear; if the duty pump fails the standby pump will start automatically.
Q max. H max. -
To ensure efficient operation of the sealed system the comfort controller also monitors the number of pump starts and changes in pressure providing excess starts or system leak alarms if operating out of the standard parameters Features Main control PCB Display PCB Pressure Transducer Flexible hose c/w wingnuts ½” non-return valve 1.2” inlet ball float valve 4” float to suit above Float switch
Technical data -
Equipment/function Wilo-CC-HVAC System: • Comfort control system for 1 to 6 pumps switched in parallel, with fixed speed Wilo-CCe-HVAC system: • Comfort control system for a fully automatic control of 1 to 6 pumps with integrated electronics/speed control or activation of external frequency converters Wilo-VR-HVAC System: • Vario controller for 1 to 4 pumps switched in parallel, with integrated speed control
Materials: • Pump housing and pressure cover: ENGJS-500-7 • Bearing bracket: EN-GJL-250 • Impeller: EN-GJL-250 (special version: G-CuSn10) • Shaft: 1.4028 • Stationary wear rings: G-CuSn10 • Mechanical seal: AQ1EGG (other mechanical seals on request) Special features • Motors in IE2 technology with higher efficiency as standard • Reduced life cycle costs due to optimised efficiency • Bidirectional mechanical seal with forced flushing • Replaceable stationary wear rings • Low NPSH-values, best cavitation properties • High availability of IEC standard motors Worldwide
Special features • Motors with higher efficiency as standard; from 0.75 kW nominal motor power motors with IE2 technology • Other materials and versions on request
Special features • Special versions on request
Information Online catalogue www.wilo.com
Information Online catalogue www.wilo.com
Information Online catalogue www.wilo.com Building Services catalogue, Heating, Air-Conditioning, Cooling
17
Product category Glanded energy-saving pumps in in-line design Series Wilo-VeroLine-IP-E Wilo-VeroTwin-DP-E
Product category Glanded energy-saving pumps in in-line design Series Wilo-CronoLine-IL-E Wilo-CronoTwin-DL-E
Product category Glanded standard pumps in in-line design Series Wilo-VeroLine-IPL Wilo-VeroTwin-DPL
Product category Glanded standard pumps in in-line design Series Wilo-CronoLine-IL Wilo-CronoTwin-DL
Design Electronically controlled glanded pump in in-line design with flange connection and automatic power adjustment
Design Electronically controlled glanded pump in in-line design with flange connection and automatic power adjustment
Design Glanded pump in in-line design with threaded connection or flange connection
Design Glanded pump in in-line design with flange connection
Application For pumping heating water (in accordance with VDI 2035), water-glycol mixtures and cooling and cold water without abrasive substances in heating, cold water and cooling water systems
Application For pumping heating water (in accordance with VDI 2035), water-glycol mixtures and cooling and cold water without abrasive substances in heating, cold water and cooling water systems
Application For pumping heating water (in accordance with VDI 2035), water-glycol mixtures and cooling and cold water without abrasive substances in heating, cold water and cooling water systems
Application For pumping heating water (in accordance with VDI 2035), water-glycol mixtures and cooling and cold water without abrasive substances in heating, cold water and cooling water systems
Q max. 170 m³/h
Q max. 680 m³/h
Q max. 245 m³/h
Q max. 1,150 m³/h
H max. 30 m
H max. 65 m
H max. 52 m
H max. 110 m
Technical data • Permissible temperature range -20 °C to +120 °C • Mains connection: 3~400 V, 50 Hz; 3~380 V, 60 Hz • Protection class IP 55 • Nominal diameter DN 32 to DN 80 • Max. operating pressure 10 bar (special version: 16 bar)
Technical data • Permissible temperature range -20 °C to +140 °C • Mains connection: 3~400 V, 50 Hz; 3~380 V, 60 Hz • Protection class IP 55 • Nominal diameter DN 40 to DN 80 • Max. operating pressure 16 bar
Technical data • Perm. temperature range -20 °C to +120 °C • Mains connection 3~400 V, 50 Hz • Protection class IP 55 • Nominal diameter Rp 1 to DN 100 • Max. operating pressure 10 bar (special version: 16 bar)
Technical data • Perm. temperature range -20 °C to+140 °C • Mains connection 3~400 V, 50 Hz • Protection class IP 55 • Nominal diameter DN 32 to DN 250 • Max. operating pressure 16 bar (25 bar on request)
Equipment/function Single-stage, low-pressure centrifugal pump in in-line design with • Mechanical seal • Flange connection • Motor with integrated electronic speed control • DP-E with switchover valve
Equipment/function Single-stage, low-pressure centrifugal pump in in-line design with • Mechanical seal • Flange connection • Lantern • Coupling • Engine with integrated electronic power adjustment • DL-E with switchover valve
Equipment/function Single-stage, low-pressure centrifugal pump in in-line design with • Mechanical seal • For flange connection with pressure measuring connection R ½ • Motor with one-piece shaft • DPL with switchover valve
Equipment/function Single-stage, low-pressure centrifugal pump in in-line design with • Mechanical seal • Flange connection with pressure measuring connection R ½ • Lantern • Coupling • IEC standard motor • DL with switchover valve
Materials: • Pump housing and lantern: EN-GJL-250 • Impeller: PPO-GF30 • Shaft: 1.4021 • Mechanical seal: AQEGG Other mechanical seals: on request
Materials: • Pump housing and lantern: EN-GJL-250 • Impeller: Standard version: EN-GJL-200 special version: G-CuSn 10 • Shaft: 1.4122 • Mechanical seal: AQEGG Other mechanical seals: on request
Materials: • Pump housing and lantern: EN-GJL-250 • Impeller: PPO fibreglass-reinforced EN-GJL-200 (depending on pump type) • Shaft: 1.4021 • Mechanical seal: AQEGG; other mechanical seals on request
Materials: • Pump housing and lantern: Standard version: EN-GJL-250 Optional: Spheroidal cast iron EN-GJS-400-18-LT • Impeller: Standard: EN-GJL200 Special version: Red brass G-CuSn 10 • Shaft: 1.4122 • Mechanical seal: AQEGG Other mechanical seals: on request
Special features • Motors with higher efficiency as standard; from 0.75 kW nominal motor power motors with IE2 technology • Energy savings due to integrated electronic power control • Simple operation with red-button technology and display • Various control modes Δp-c, Δp-v, PID and n-const. (control mode) • Analogue interfaces 0-10 V, 2-10 V, 0-20 mA, 4-20 mA • Optional interfaces for bus communication using plug-in IF-Modules • Integrated dual pump management • Integrated full motor protection (PTC thermistor sensor) with trip electronics
Special features • Motors with IE2 technology for higher efficiency fitted as standard • Energy savings due to integrated electronic power control • Simple operation with red-button technology and display • Various control modes Δp-c, Δp-v, PID and n-const. (control mode) • Analogue interfaces 0-10 V, 2-10 V, 0-20 mA, 4-20 mA • Optional interfaces for bus communication using plug-in IF-Modules • Integrated dual pump management • Integrated full motor protection (PTC thermistor sensor) with trip electronics
Special features • Motors with higher efficiency as standard; from 0.75 kW nominal motor power motors with IE2 technology • Standard condensate drainage holes in the motor housings and lanterns • Series version: Motor with one-piece shaft • Version N: Standard motor B5 or V1 with stainless steel plug shaft • Bidirectional mechanical seal with forced flushing • Easy to install due to feet with threaded holes on pump housing
Special features • Motors with higher efficiency as standard; from 0.75 kW nominal motor power motors with IE2 technology • Reduced life cycle costs due to optimised efficiency • Standard condensate drainage holes in the motor housings • Can be used flexibly in air-conditioning and cooling systems, with application benefits due direct draining of condensate via optimised lantern design (patented) • Bidirectional mechanical seal with forced flushing • High worldwide availability of standard motors (according to Wilo specifications) and standard mechanical seals • Easy to install due to feet with threaded holes on pump housing
Information Online catalogue www.wilo.com Building Services catalogue, Heating, Air-Conditioning, Cooling
Information Online catalogue www.wilo.com Building Services catalogue, Heating, Air-Conditioning, Cooling
Information Online catalogue www.wilo.com Building Services catalogue, Heating, Air-Conditioning, Cooling
Information Online catalogue www.wilo.com Building Services catalogue, Heating, Air-Conditioning, Cooling
Worldwide. High-efficiency solutions from Wilo. 3
WILO SE, with headquarters in Dortmund, is one of the world’s leading manufacturers of pumps and pump systems for heating, air conditioning and cooling technology, as well as for water supplies and sewage treatment and disposal. Founded in 1872 as Kupfer- und Messingwarenfabrik Louis Opländer, the company has almost 70 branches worldwide and over 6,200 employees.
Turnover amounted to 1,021.4 million EUR in 2010. International recognition has increased rapidly since the company became a European limited liability company (SE) in 2008. Wilo pumps and systems set global standards for efficiency and technical performance: with high-efficiency solutions for all applications in the segments.
Product category
Product category
Product category
Product category
Special glanded pumps in in-line design Series Wilo-VeroLine-IPH-W Wilo-VeroLine-IPH-O
Special glanded pumps in in-line design Series Wilo-VeroLine-IPS
Design Glanded pump in in-line design with flange connection
Design Glanded pump in in-line design with threaded connection or flange connection
Design Glanded pump in monobloc design with flange connection
Design Glanded pump in monobloc design with threaded connection or Victaulic Connection
Application IPH-W: For pumping hot water without abrasive matter in closed industrial circulation systems, district heating, closed heating systems, etc. IPH-O: For pumping heat transfer oil in closed industrial circulation systems
Application For pumping cold and hot water (in accordance with VDI 2035) without abrasive substances in heating, cold water and cooling water systems.
Application For pumping cold and hot water (in accordance with VDI 2035) without abrasive substances in heating, cold water and cooling water systems.
Application For pumping water-glycol mixtures with 20 to 40 %
Q max. 80 m³/h
Q max. 13 m³/h
Q max. 360 m³/h
Q max. 80 m³/h
H max. 38 m
H max. 3m
H max. 105 m
H max. 25 m
Technical data • Permissible temperature range IPH-W: -10 °C to +210 °C (at a max. of 23 bar) • Permissible temperature range IPH-O: -10 °C to +350 °C (at a max. 9 bar) • Mains connection 3~400 V, 50 Hz • Protection class IP 55 • Nominal diameter DN 20 to DN 80
Technical data • Perm. temperature range -10 °C to+140 °C • Mains connection 3~400 V, 50 Hz • Protection class IP 55 • Nominal diameter Rp 1, DN 40 and DN 50 • Max. operating pressure 10 bar or 6 bar for flange connection
Technical data • Perm. temperature range -20 °C to +140 °C • Mains connection 3~400 V, 50 Hz • Protection class IP 55 • Nominal diameter DN 32 to DN 150 • Max. operating pressure 16 bar (25 bar on request)
Technical data • Perm. temperature range -15 °C to +60 °C • Mains connection 3~400 V, 50 Hz • Protection class IP 55 • Nominal diameter G2/G 1½ (only BAC 40… /S) or Victaulic connection ∅ 60.3/48.3 mm (BAC 40… /R) ∅ 76.1/76.1 mm (BAC 70…/R) • Max. operating pressure 6.5 bar
Equipment/function Single-stage, low-pressure centrifugal pump in in-line design with • Mechanical seal • Flange connection • Lantern • Motor with special shaft
Equipment/function Single-stage, low-pressure centrifugal pump in in-line design with • Mechanical seal or stuffing box • Threaded or flange connection with pressure measuring connection R ⅛ • Standard motor
Equipment/function Single-stage low-pressure centrifugal pump in block design, with axial suction port and radially arranged pressure port with • Mechanical seal • Flange connection with pressure measuring connection R ⅛ • Lantern • Coupling • IEC standard motor
Equipment/function Single-stage low-pressure centrifugal pump in monobloc design, with axial suction port and radially arranged pressure port
Materials: • Pump housing and lantern: EN-GJL-200 • Impeller: Plastic • Shaft: 1.4021 • Mechanical seal: BVEGG Other mechanical seals on request
Glanded monobloc pumps Series Wilo-CronoBloc-BL
Materials: • Pump housing standard: EN-GJL-250 Optional: EN-GJS-400-18 • Impeller (standard): EN-GJL-200 Special version: Bronze G-CuSn10 • Shaft: 1.4122 • Mechanical seal: AQEGG Other mechanical seals on request
Glanded monobloc pumps Series Wilo-BAC
Materials: • Pump housing: PA 6.6 50 % GF • Impeller: PA/PPO, fibreglass-reinforced • Shaft: X30Cr13 • Mechanical seal: • Motors with higher efficiency as standard; from 0.75 kW nominal motor power motors with IE2 technology • Reduced life cycle costs due to optimised efficiency • Pump housing in plastic design • Version with Victaulic or threaded connection (BAC 70/135... with Victaulic connection only)
Special features • From 0.75 kW nominal motor power motors with IE2 technology for higher efficiency fitted as standard • Bidirectional, self-cooled mechanical seal • Great variety of applications by a large fluid temperature range without additional wearing parts
Special features • Worldwide availability of the standard motors used
Special features • Motors with higher efficiency as standard; from 0.75 kW nominal motor power motors with IE2 technology • Meets user requirements due to performance and main dimensions in accordance with EN 733 • Long motor life due to standard condensate drainage holes in the motor housing • Corrosion protection due to cataphoretic coating
Special features • Motors with higher efficiency as standard; from 0.75 kW nominal motor power motors with IE2 technology • Reduced life cycle costs due to optimised efficiency • Pump housing in plastic design • Version with Victaulic or threaded connection (BAC 70/135... with Victaulic connection only)
Information Online catalogue www.wilo.com
Information Online catalogue www.wilo.com
Information Online catalogue www.wilo.com
Information Online catalogue www.wilo.com
19
WILO UK Limited Centrum 100, Second Avenue Burton on Trent, Staffs DE14 2WJ T +44 (0) 1283 523000 F +44 (0) 1283 523099
[email protected] www.wilo.co.uk Wilo Ireland Unit B1, Corcanree Business Park Dock Road, Limerick, Ireland T: +353 (0)61 227566 F: +353 (0)61 229017
[email protected] www.wilo.ie
Future proof high efficiency products from Wilo.
Range Guide. Building Services - Commercial.
