R e p l a c e m e n t P a r t s f o r

Replacement Parts for DitchWitch ® Trenchers Chains Cutting Teeth Sprockets Bearings Carbide Teeth Anoka, Minnesota Atlanta, Georgia Ontario, Ca...
Author: Elvin Marsh
0 downloads 2 Views 8MB Size
Replacement Parts for

DitchWitch

®

Trenchers Chains Cutting Teeth Sprockets Bearings Carbide Teeth

Anoka, Minnesota

Atlanta, Georgia

Ontario, California

Centralized Customer Service: 800/328-2424 w w w . b a l l a n t i n e i n c . c o m

Faster Service Better Quality Lower Prices

Replacement Parts for ®

DitchWitch Effective 10/08

Replacement Parts for Ditch Witch® Trenchers Ditch Witch® is a registered trademark of The Charles Machine Works, Perry, OK. Ordering Instructions All credit accounts must be approved by our Anoka, Minnesota office. Please order by part number and give the make and model of your machine. The enclosed parts and price list supersedes all others. (Prices are subject to change without notice.) You may order from the office which is most convenient for you.

Main Office 840 McKinley Street Anoka, Minnesota 55303

Branch Office 675 Wesleyan Drive Southwest Atlanta, Georgia 30336

Toll Free Customer Service Toll Free 800-328-2424 FAX 763-427-2277

Branch Office 801 S. Dupont, Suite G Ontario, California 91761

Trencher Chain, Base Plates and Cutters for the Ditch Witch HT220 Track Machine Are Also Available From Ballantine, Inc. ®

Ballantine Provides Digging Systems Designed for Large Track Trenchers in All Ground Conditions Throughout the World. Take Advantage of Ballantine’s Superior Quality Products and Our 50 Years of Expertise in the Trenching Industry.

Index Index Page 1

Trencher Chain Identification Sheet

Page 2

Chain Assembly Guide

Page 3

Chain Assembly Configurations

Page 4

Smart Part Numbering System

Page 5

Chains for Walk Along Models

Page 6

Model(s): M, M422 Series. Drive Parts

Page 7

Model(s): M Series, 1410, 1420, 1500, 1810, 1620, 350SX, 400SX, 2020. Boom, Auger & Drive Parts

Page 8-9

Model(s): C-7, C-9, C77, C99, 350SX. Boom & Drive Parts

Page 10

Model(s): M Series, C Series, J-20, 1410, 1420, 1500, 1810. Teeth & Accessories

Page 11-12

Model(s): M Series, C Series, 350SX, 400SX, 1010, 1020, 1030, 1210, 1220, 1230, 1330, 1410, 1420, 1620, 1810, 1820, 2020, 2200. Chain,Teeth & Accessories

Page 13

Model(s): 1010, 1020, 1030, 1210, 1220, 1230, 1330, 1410, 1420, 1610, 1620, 1810, 1820, 2020. Roller Booms, Sprockets, Rollers & Bearings

Page 14

Model(s): 1030, 1210, 1220, 1230, 1330, 1410, 1420, 1610, 1620, 1810, 1820, 2020. Roller Booms, Sprockets & Roller

Page 15

Model(s): J20, 2200, 2300, 2310, 3610, RT36 & Attachments H311, H312. Boom Parts

Page 16-17

Model(s): 2200, RT36. Boom, Sprockets, Bearings & Belts

Page 18

Chains for Mid-Size Riding Trenchers

Page 19

Model(s): 2200, 2300, 2310, 3610, RT36 & Attachments H311, H312. Sprocket Style Booms, Sprockets & Bearings

Page 20

Model(s): 2300, 2310, 3500, 3610, 3700, 4500 & Attachments H300 Series, H313 & H314. Roller Booms, Sprockets & Roller

Page 21

Model(s): 2300, 2310, 3500, 3610, 3700, 4500 & Attachments H300 Series, H314, H514, H515, H552. Roller Booms, Sprockets & Roller

Page 22

Model(s): J20, 2200, 2300, 2310, 3500, 3610, 3700, RT36 & Attachments H300 Series, H500 Series. Teeth & Accessories

Page 23-24

Model(s):V30, R30, 3210. Booms, Sprockets, Bearings & Belts

Page 25-26

Model(s):V30, R30, 3210, 3500, 3610, 3700, 4500. Chain,Teeth & Accessories

Page 27-29

Model(s): 3610, RT36, R40, 4010 & Attachments H300 Series, H500 Series, A/H 400, A/H 500 using 2" Pitch Chain. Boom Sprockets, Bearings, Auger Shafts & Accessories

Page 30-31

Model(s): R40, 3210, 3500, 3700, 4010, 4500, RT36, RT40. Teeth & Accessories

Page 32-33

Model(s): J20, 2200, 2300, 2310, 3500, 3700,V30, R30, R40, 3210, 3610, 4010, 4500. Chain & Accessories

Continued on Page ii… Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page i

Index Page 34

Chains for Large Riding Trenchers

Page 35-36

Model(s): R30, R40, 3210, 4010 & Attachments H300, A/H400, A/H500. Boom Sprockets, Bearings, Augers & Accessories

Page 37

Model(s): A/H500, A615, 510A. Sprockets, Rollers, Bearings, Augers & Accessories for Alligator Boom

Page 38-39

Model(s): R40, 4010, R60, R65, 5010, RT55, 5110, 6510, 7510, RT75, 7610, 8020, RT95, RT115, & Attachments A/H400, A/H500, H700. Chain,Teeth & Accessories

Page 40

Model(s): R60, R65, 5010, 5110, RT55, 6510, 7510, RT75, 7610, 8020, RT95, RT115, A/H400, A/H500, H700. Anti-Back Flex Chain

Page 41

Model(s): R40, R60, R65, 4010, 5010, 6510, 7510, 7610, 8020, & Attachments A/H400, A/H500, H700. Boom Parts, Sprockets, Bearings & Accessories

Page 42

Model(s): R40, R60, R65, 4010, 5010, 6510, 7510, 8020, & Attachments A/H400, A/H500, H700. Auger Parts & Accessories

Page 43-44

Model(s): R40, R60, R65, 4010, 5010, 6510, 7510, 7610, 8020 & Attachments A/H400, A/H500, H700. Drive Sprocket Head Shaft & Components

Page 45-46

Chain & Accessories for Ultra Heavy-Duty Trench-ALL® 3110

Page 47

Model(s): R100 & AR12, RT115. Chain

Page 48

Model(s): R100, AR12. Chain,Teeth & Adapters

Page 49

Model(s): R100, AR12. Boom Sprocket, Auger Sprockets, Drive Sprockets & Accessories

Page 50-52

Chain & Accessories for Ultra Heavy-Duty Trench-ALL® 4086

Page 53

Rock & Frost Section

Page 54

Chain,Teeth & Adapters for Terminator®, Alligator, Rock & Frost Walk Along Trenchers

Page 55-56

Model(s):V30, R30, 2300, 2200, 2310, R40, J20, 3500, 3610, 3700, R40, 4500, 4010. Terminator®, Alligator, and Rock & Frost Chain,Teeth & Adapters

Page 57-58

Model(s):V30, R30, 2300, 2310, R40, 4010, 5010, 3500, 2200, 3610, 3700, 4500. Terminator®, Alligator and Rock & Frost Anti-Back Flex Chain,Teeth & Adapters

Page 59-60

Model(s): R60, R65, R6510, R40, 4010, 5010, 7510, 7610, 8020. Terminator®, Alligator and Rock & Frost Chain,Teeth & Adapters

Page 61

Model(s): R60, R65, R6510, R40, 4010, 5010, 7510, 7610, 8020 & Attachments A/H500, A/H700. Terminator®, Alligator and Rock & Frost Anti-Back Flex Chain,Teeth & Adapters

Page 62-63

Rock & Frost Chain,Teeth and Adapters for TA3110 Ultra Heavy-Duty Chain

Page 64

Rock & Frost Chain,Teeth and Adapters for R100, AR12, R150

Page 65-67

Rock & Frost TA4086 Chain,Teeth and Adapters for R100, AR12, R150

Page 68

Roller Chain Section

B a l l a n t i n e , I n c . • D i t c h W i t c h ® R e p l a c e m e n t P a r t s • P a g e ii

Trencher Chain Identification Sheet

Make of Machine: _____________________________________

Model:_______________________

Measure Pitch Size (Center of Pin to Center of Next Pin) 1.654"

2.000"

2.043"

2.609"

2.648"

3.067"

3.075"

3.110"

3.125"

3.250"

4.000"

4.500"

























Every 4th Pitch Attachment Spacing

Anti-Backflex Chain

Every 2nd Pitch Attachment Spacing

K-Style Chain

Determining the number of pitches in a chain. One pitch equals the distance from one pin to the next pin. The example below is 20 pitches long. one pitch

Left-hand cutter

Right-hand Cutter

* Auburn Cutters are the Opposite Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 1

Chain Assembly Guide GROUND CONDITIONS/APPLICATION CHAIN ASSEMBLY OPTIONS

Heavy/Wet

Sandy

Loose Dirt

Medium

Hard

Rocky

Cup Assembly/4 pitch Cup Assembly/2 pitch Combo/Terminator-Cup Combo/Rock & Frost-Cup Full Terminator (bolt-on) Full Rock & Frost (bolt-on) LP Welded Terminator LP Welded Alligator LP Welded H-Plate Anti Back–Flex Chains

Recommended as an upgrade to any of the chain assemblies listed. ABF Chains are designed for more severe ground conditions.

This chart shows the most popular styles of chain assemblies and recommended guidelines as to their usage. Only basic catagories of ground conditions are shown. These are recommendations only. Please consult a Ballantine representative when matching chain assemblies with specific ground conditions or any special application requirements. Key:

Not Recommended Recommended Best

Parts for earlier models, not listed in this catalog are also available.

Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 2

Chain Assembly Configurations

Cup Assembly – 2 Pitch

Cup Assembly – 4 Pitch

Combo/Terminator – Cup

Combo/Rock & Frost Cup

Full Terminator

Full Rock & Frost

LP Welded Alligator

LP Welded H-Plate

LP Welded Terminator Ballantine, Inc. • Ditch Witch

Anti Back-Flex Chains ®

Replacement Par ts • Page 3

Ballantine, Inc. Smart Part Numbering System for Chain Assemblies Ballantine's smart part numbering system has been developed to allow people to easily identify the various chain assemblies that are available and what suits specific applications. The diagram below explains what each section of the part number means.

B 20002 00 B 25 Number of Stations (Tooth attaching points)

Chain Size (see chart below) Digging Width in inches

B = Ballantine TA = Trench All® AL = Alligator SH = Terminator® Welded D = Ditch Witch® teeth (1.654" only) C = Case teeth® (1.654" only) M = Melroe®/Bobcat®/Burkeen® teeth (1.654" only) V = Vermeer® teeth (1.654" only) T = Terminator® Bolt on the side

Assembly Configuration B = Bare Chain C = Cup Assembly R = Rock & Frost M = Mixed (Rock & Frost and Cup Teeth) H = H-Plate V = Alligator (.735) D = Alligator (.765) G = Ground breaker mixed chain

Ditch Witch® Chain Size Chart TA1654-4

1.654" Pitch every 4th chain

(34,000 lb. T.S.)

TA1654-2

1.654" Pitch ABF chain

(34,000 lb. T.S.)

TA1654HD-2

1.654" Pitch Heavy Duty ABF chain (38,000 lb. T.S.)

2-4

2.00" Pitch every 4th chain

(50,000 lb. T.S.)

2ABF-2

2.00" Pitch ABF chain

(50,000 lb. T.S.)

3067HD-2

3.067" Pitch Heavy Duty chain

(110,000 lb. T.S.)

3067LD-2

3.067" Pitch Light Duty chain

(70,000 lb. T.S.)

3067ABF-2

3.067" Pitch ABF chain

(110,000 lb. T.S.)

3067-4

3.067" Pitch every 4th chain

(110,000 lb. T.S.)

TA3110-2

3.110" Pitch Trench All chain

(165,000 lb. T.S.)

TA4086-2

4.086" Pitch Trench All chain

(225,000 lb. T.S.)

450-2

4.500" Pitch R100 style chain

(150,000 lb. T.S.)

Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 4

Chains for Ditch Witch® Walk Along Models

1

2

3

Ref No. 1 2 3

Note:

Part No. TA1654-4 TA1654-2 TA1654HD-2

Description 1.654" Pitch Chain every 4th 1.654" Pitch Chain ABF 1.654" Pitch Chain Heavy Duty ABF

Weight (lbs) 34,000 T.S. 34,000 T.S. 38,000 T.S.

The Trench-All® Chain lines are specifically engineered for today’s higher horsepower trenchers and their roller style booms. All Trench-All® Chains are ultra heavy duty anti back-flex chains with raised rivet design.

Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 5

Drive Parts for Models M & M422 Series Trenchers 1

19 2

5

3

6

9

14

10

15

11

16

18

4 7

21

8

Ref No. 1 N/S 2 3 4 5 6 7 8 9 10 11 12 13 N/S 14 N/S 15 16 17 N/S 18 19 20 21

Part No. B 165-415 B 165-416 B 165-944 B 105-067 B 105-065 B 180-031 B 180-037 B 155-802 B 110-003 B 125-204 B 125-203 B 125-205 B 115-454 B 180-035 B 180-036 B 180-032 B 105-461 B 105-331 B 105-330 B 115-465 B 105-704 B 140-702 B 145-047 B 105-352 B 140-038

12

17

20 13

Description Head Shaft, 8" Pivot - 31" Long Head Shaft, 12" Pivot - 341⁄2" Long Key (1⁄4" x 13⁄4") Bolt (1⁄2" N.C. x 23⁄4") Nut Lock 1⁄2" N.C. Dirt Shield Spacer Seal Seal Bearing Shield Cone Bearing Cone Bearing W/ Seal Bearing Cup Retaining Ring 8" Pivot Spacer 12" Pivot Spacer Spacer Tang Washer Lock Washer Adjusting Nut. Retaining Ring 5⁄16" Set Screws Drive Sprocket, 13⁄8" Bore Auger Adjusting Screw Adjusting Block

Weight (lbs) 13 15 .10 .06 .06 .1 .2 .0 .06 .19 .44 .19 .06 1.5 3.5 .1 .06 .06 .2 .06 .06 4 25 .63 1.5

Adjusting Miscellaneous Parts (not shown) for Model M Part No. B 140-718* B 140-720* B 125-010 B 155-814 B 155-815 B 165-320 B 165-321 B 170-002 B 170-005

Description Sprocket Head Shaft 11⁄8” Bore (M3 - M389) Sprocket Head Shaft 11⁄4” Bore (M3 - 22 or M329) Drive Shaft Bearing (M2, M3) Head Shaft Seal (M3, M389) Dust & Dirt Seal (M3 - M389) Head Shaft Drive - 8” Pivot (M3 or M389) Head Shaft Drive - 12” Pivot (M3 or M329) V Belt Set (3) (Model M3) V Belt Set (3) (Model M)

Weight (lbs) 4.5 2.5 .7 .05 .1 8.65 12 2.2 3

* Measure bore size.

Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 6

Boom, Auger and Drive Parts for Ditch Witch® Models M Series, 1410, 1420, 1500, 1810, 1620, 350SX, 400SX & Model 2020 using Sprocket Boom 4

2

1

7 5

8

6 10

11

9 13

12

14 17

16

Ref No. 1 2 3 4 N/S 5 6 7 8 9 10 11 N/S 12 13 14 N/S 15 16 N/S 17 N/S 18 N/S

18

15

Part No. B 105-352 B 140-038 B 105-515 B 140-551 B 140-552 B 180-445 B 140-775 B 140-759 B 115-464 B 115-554 B 140-028 B 140-712 B 140-653 B 105-379 B 125-009 B 140-051 B 140-060 B 142-006 B 181-361 B 184-017 B 145-204 B 145-183 B 140-703 B 130-124

Description Square Head Set Screw Boom Adj. Block Cotter Pin (3⁄16" x 3") Boom Extension, 1' Boom Extension, 2' Sq. Idler Shaft Dirt Shield (2 Required) Boom End Slide & Stop, Less Sprocket Retaining Ring Boom Spring Sleeve, Boom Idler, Sprocket Sprocket Assembly (includes ref. #’s 11, 8, 14, 6) Bolt (3⁄4" NC x 11⁄4") Idler Sprocket, Bearing Boom without Sprocket Assembly Boom Complete with Slide & Stop, 2 Sprockets Split Sprocket (142-039) Hub for 1410/1420 Hub for 1620 Auger – 1410 & 1420 Only Auger – 1810 Only Drive Sprocket (1410, 1420, 1810 & 1500) Drive Chain 1420 #50-92p (not shown)

Ballantine, Inc. • Ditch Witch

®

Weight (lbs) .63 1.5 .06 11 16 .2 .25 11.07 .06 1.15 .39 6.5 7.85 .9 1.5 21.53 54 6.18 5 5 27.90 4.2 3.36

Replacement Par ts • Page 7

Boom and Drive Parts for Ditch Witch® Models C-7, C-9, C77, C99 & 350SX

1

14

2

4

3

5 6

11

Ref No. 1 N/S 2 N/S 3 N/S 4 5 6 7 8 9 10 11 12 13 14

Part No. 140-088 140-090 140-499 140-498 140-712 140-653 140-770 115-553 115-001 140-775 125-009 115-464 180-445 105-379 105-372 140-794 105-352

B B B B B B B B B B B B B B B B B

10

12

7

8

9

13

Description Boom Assembly (Less Sprocket) Boom Assembly (With Sprocket) Boom Only Boom Assembly Sprocket Sprocket Assembly (includes ref. #’s 2, 6, 7, 8) Slide & Stop Boom End Spring Zerk Fitting (1⁄8" NPT Str) Washer, Shield Bearing, Idler Sprocket Snap Ring, Idler Sprocket Idler Shaft Bolt (3⁄4" x 11⁄4") Lock Nut (3⁄4") Boom End Square Head Set Screw

Weight (lbs) 17 26

6.5 7.5 6.5 .63 .06 .25 1.5 .06 1 .19 .10 7.6 .63

Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 8

Boom and Drive Parts for Ditch Witch® Models C-7, C-9, C77, C99 & 350SX, continued

17 15

16 21 31

18 22 19 23 26

25 20

24 32 27 29 28 30

Ref No. 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 NS NS NS

Part No. 145-099 115-465 140-703 110-003 155-802 125-204 125-203 125-205 180-037 180-031 115-657 170-033 130-006 130-008 130-001 130-002 140-028 105-047 170-006 170-001 105-146

B B B B B B B B B B B B B B B B B B B B B

Description Auger Snap Ring Drive Sprocket 13⁄8" Bore Machinery Bushing Seal Bearing Bearing Race Seal Cover Dirt Shield Urethane Washer Belt Set (3 Belts) Drive Chain (101 P) #40RC Drive Chain (103 P) #40 RC Connector Link Offset Link Boom Sleeve Locknut (3⁄8") Belt Set, C49 - Steel Cable (2) Belt Set, (2) Models (C2, C3, C4, C49) Bolt (3⁄8" NC x 21⁄4")

Ballantine, Inc. • Ditch Witch

®

Weight (lbs) 15 .06 4.2 .10 .10 .19 .44 .19 .2 .1 .06 2.75 1.75 2 .09 .02 .5 .06 1.5 1 .06

Replacement Par ts • Page 9

Teeth and Accessories for Ditch Witch® Trencher Models M Series, C Series, J-20, 1410, 1420, 1500, & 1810 using 1" Hole Spacing on side bars for cutters

23 21

20 24

22

Replacement Drive Shaft for Ditch Witch® Models C7, C9, C77 & C99 Ref No. 22 23 24 N/S

Part No. B 165-443 B 105-330 B 105-331 B 105-461

Description Head Shaft (Replaces # B 165-382) Nut (1-3/8" NF) (Replaces # B 105-380) Lockwasher (1-3/8" NF) (Replaces # B 105-381) Tang Washer - Not Shown

Ballantine, Inc. • Ditch Witch

®

Weight (lbs) 11 .25 .06 .06

Replacement Par ts • Page 10

Chain, Teeth and Accessories for Ditch Witch® Models M Series, C Series, 350SX, 400SX, 1010, 1020, 1030, 1210, 1220, 1230, 1330, 1410, 1420, 1620, 1810, 1820, 2020 & 2200 (1.654" Pitch Chain with 13⁄4" Side Bar Hole Spacing)

1

19

9

10

12

7

6

16 20

18

13

14

24

11

26

29 17

15 21

8

Ref No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

Part No. TA1654-4 B 136-024 B 136-025 B 1010CCL B 1010CCR B 105-047 38LW B 105-099 B 136-028 B 135-320 B 105-098 6576368 B 105-162 B 105-183 B 105-052 B 136-027 B 136-029 B 105-075 B 137-001 B 137-007 B 137-003

Description 1.654" Pitch every 4th Tooth RH Tooth LH Tooth LH (MTO Only) Tooth RH (MTO Only) Locknut (3⁄8") Lockwasher (3⁄8") Bolt (3⁄8" x 7⁄8") Tooth Spacer (3⁄8" x 1") Tubular Spacer (outside) (181-650) Bolt (3⁄8" x 3") Tubular Spacer (cup-cutter, inside) (181-651) Bolt (3⁄8" x 21⁄4") Bolt (3⁄8" x 21⁄2") (709-915) Bolt (3⁄8" x 11⁄4") 5" Flat Spacer Tooth Spacer (1" sq) Bolt (3⁄8" x 2") Conn Pin Key Roller Link

Weight (lbs) 34K T.S. .55 .55 .55 .55 .02 .05 .06 .25 .1 .06 .06 .06 .06 .06 .75 .06 .10 .01 .24

continued on next page

Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 11

Chain, Teeth and Accessories for Ditch Witch® Models M Series, C Series, 350SX, 400SX, 1010, 1020, 1030, 1210, 1220, 1230, 1330, 1410, 1420, 1620, 1810, 1820, 2020 & 2200, continued (1.654" Pitch Chain with 13⁄4" Side Bar Hole Spacing)

22

32

30

31

25 23

5 2

3

28

Ref No. Part No. 22 B 137-015 B 137-014 23 B 136-047 24 B 500-003 25 B 136-048 26 B 105-258 27 1010GBL 28 1010GBR 29 B 105-022 30 B 137-002H 31 TA1654-4CL 32 B 136-049

4

Smart Pt. No. B1370200B26 B1370200B08

27

Description Chain (7' 2") 2 pitch spacing Chain (2' 2") 2 pitch spacing Adapter for 8" cut Bolt (3⁄8" x 23⁄4") (for 8" adapter) Adapter 10" cut Bolt (3⁄8" x 33⁄4") (for 10" adapter) Ground Breaker L.H. Ground Breaker R.H. Bolt (3⁄8" x 4") Conn Link Double Standard Conn Link Single Standard Adapter 12" cut

Ballantine, Inc. • Ditch Witch

®

Weight (lbs) 11.52 35.30 2.35 .06 3.05 .06 .75 .75 .07 1.4 1.1 4.25

Replacement Par ts • Page 12

Roller Booms, Sprockets, Rollers, and Bearings for Ditch Witch® Models 1010, 1020, 1030, 1210, 1220, 1230, 1330, 1410, 1420, 1610, 1620, 1810, 1820 & 2020 1 5

4

10

9

2

15

6

12

11

8 3

17 13

16

7 14

19

20

18 21

Ref No. 1 N/S 2 N/S 3 N/S 4 5 6 7 8 9 10 11 12 13 N/S 14 15 16 17 18 19 20 21

Part No. 140-488 140-487 140-534 140-533 143-096 143-093 105-300 105-310 106-033 105-352 106-034 110-054 184-037 115-464 125-009 142-755 142-754 183-469 105-379 165-985 165-923 145-265 145-271 145-309 140-703

B B B B B B B B B B B B B B B B B B B B B B B B B

Description 24" Roller Boom Only (U-Bracket) 24" Boom Assembly with Roller (U-Bracket) 24" Roller Boom Only (Flat Back) (140-550) 24" Boom Assembly with roller (Flat Back) 30" Roller Boom Only 30" Boom Assembly with Roller Bolt (1⁄2" X 31⁄4") 3⁄4" Jam Nut 1" Jam Nut Set Screw (3⁄4" X 5") Screw Set (1" x 6") Machinery Bushing Machinery Bushing (1⁄8" thick) Snap Ring Bearing Roller Only Roller Assembly with Bearing Idler Shaft Bolt (3⁄4" X 11⁄4") Key (1⁄4" sq x 21⁄4" long) Key (1⁄4" sq x 2" long) Auger Auger (Long–41⁄2" Collar) Outboard Bearing Auger (Not for model 1820) Drive Sprocket

Ballantine, Inc. • Ditch Witch

®

Weight (lbs) 35 42.1 30 42

.21 .06 .07 .10 .2 .06 .1 .06 1.50 7.8 12.65 .9 .9 .03 .03 13.55

4.2

Replacement Par ts • Page 13

Roller Booms, Sprockets, and Roller for Ditch Witch® Models 1030, 1210, 1220, 1230, 1330, 1410, 1420, 1610, 1620, 1810, 1820, & 2020 1

3

5

4

6

2 7

8

10

15

12

13

9

11

Ref No. Pg.14 N/S 1 N/S N/S N/S 2 N/S 3 4 5 6 7 8 9 10 11 N/S 12 13 14 15 N/S

Part No. B 143-096 B 143-093 B 140-519 B 140-518 B 140-527 B 140-531 B 142-755 B 142-754 B 110-054 B 184-037 B 125-009 B 115-464 B 180-445 B 105-379 B 106-034 B 106-033 B 142-006 B 142-039 B181-361 B 184-017 B 140-703 B 165-923 B 142-023

14

Description Roller Boom, 30" (Boom Only) Roller Boom Assembly , 30" Roller Boom 36" (Boom Only) Roller Boom Assembly 36" Roller Boom 48" (Boom Only) Roller Boom Assy 48" Roller Only Roller Assembly (brg. Snap Ring, Washer) Machinery Bushing Machinery Bushing (1⁄8" thick) Bearing Snap Ring Sq. Idler Shaft Bolt Adjusting Screw (1" X 6" n.c) Nut (1" n.c.) Sprocket, Split (Not for model 1820) Sprocket, Split Hub Sprocket Hub (184-205) (1620) Drive Sprocket Key Hex Drive Sprocket (2020)

Ballantine, Inc. • Ditch Witch

®

Weight (lbs)

47 60.50 80 7.8 12.65 .06 .1 1.5 .06 .75 .19 1.3 .15 6.18 6.25

4.2 .03

Replacement Par ts • Page 14

Boom Parts for Ditch Witch® Models J20, 2200, 2300, 2310, 3610, RT36 & Attachments H311, H312 1

3

2

8

12 5

4

6

10

7

15

11

16 14

9 17

13

Ref No. 1 2 3 4 N/S 5 N/S 6 7 8 9 N/S N/S 10 11 12 13 N/S 14 15 16 N/S N/S 17 N/S

Part No. 140-759 105-379 180-445 140-712 140-653 140-711 140-652 125-009 140-775 115-464 140-062 140-061 140-057 115-001 140-028 115-554 140-551 140-552 140-038 105-352 140-701 140-721 170-020 170-061 140-007

B B B B B B B B B B B B B B B B B B B B B B B B B

Description Boom End Slide & Stop, Less Sprocket Bolt (3⁄4" x 11⁄4") Sq. Idler Shaft Idler Sprocket, 12 Tooth - 1.654" Std. Chain Std. Sprocket Assembly, 12 Tooth - 1.654" Std. Chain Idler Sprocket, 9 Tooth - 2" H.D. Chain H.D. Sprocket Assembly, 9 Tooth -2" H.D. Chain Square Hole Bearing Dirt Shield Retaining Ring Digging Boom, Without Sprockets Digging Boom Assy. with 3 Sprockets - Std. 1.654" Digging Boom Assy. with 3 Sprockets - 2" H.D. Straight Zerk 1⁄8" NPT Urethane Boom Sleeve Digging Boom Spring 1' Digging Boom Extension 2' Digging Boom Extension Boom Adjusting Block Set Screws Boom Adjustment Head Shaft Drive Sprocket - 1.654" Std. Head Shaft Drive Sprocket - 2" H.D. Chain V Belt Set V Belt Set Boom Gussets

Ballantine, Inc. • Ditch Witch

®

Weight (lbs) 12 .3 1 6.5 8 7 9 1.5 1 .06 34 74 71 .01 .4 1.2 11 16 1 .63 5 5.5 2 2 7

Replacement Par ts • Page 15

Boom, Sprockets, Bearings and Belts for Ditch Witch® Model 2200, RT36

1

2

6

3 7 5

4

9

8

10

12

11

Ref No. 1 N/S N/S 2 3 4 N/S 5 N/S 6 7 8 9 10 11 12 13 N/S

Part No. B 140-242 B 140-240 B 140-241 B 140-013 B 115-557 B 140-712 B 140-653 B 140-711 B 140-652 B 115-464 B 140-775 B 125-009 B 180-445 B 105-379 B 140-763 B 140-583 B 140-588 B 140-585

13

Description Boom, Less Sprockets Boom Assy. (1.654" Pitch Small Sprockets) Boom Assembly (2" Pitch Large Sprockets) Boom Sleeve Boom Spring Sprocket (1.654" Pitch) Sprocket Assembly (1.654" Pitch) Sprocket (2" Pitch) Sprocket Assembly (2" Pitch) Snap Ring Dirt Shield Sq. Hole Bearing Sq. Shaft Bolts (3⁄4" X 11⁄4") Boom End Boom Ext. (1') With 1.654" Sprockets Boom Ext. (1') With 2" Sprocket Boom Ext. (2') Use With Both Sprockets

Weight (lbs) 44 81 86 .5 2.26 6.5 7.8 7 7.5 .06 .25 1.5 1 .19 16 24 23 34

continued on next page Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 16

Boom, Sprockets, Bearings and Belts for Ditch Witch® Model 2200 & RT36, continued

16

15

23

17 18

20

19

14

26

21

24

22

25

Ref No. 14 15 16 17 18 19 20 21 22 23 24 25 26

Part No. 105-265 142-005 140-701 181-267 180-028 155-704 180-026 155-801 170-028 145-173 170-061 167-003 165-901

B B B B B B B B B B B B B

Description Bolt (for Split Sprocket) Head Shaft Sprocket (Split 2" Pitch) Head Shaft Sprocket (1.654" Pitch) Hub For Split Sprocket Seal Spacer O Ring Fiber Spacer Seal Belt Set Auger Belt Set (3) Headshaft With Races & Sleeves Key

Ballantine, Inc. • Ditch Witch

®

Weight (lbs) .13 4.5) 7.65 3 1.45 .01 .01 .2 1.10 23.5 1.78 24.9 .03

Replacement Par ts • Page 17

Chains for Ditch Witch® Mid-Size Riding Trenchers

1

2

Ref No. 1 1 2 2

Part No. 135-214 135-212 137-215 137-216

B B B B

Smart Pt. No. B2000400B18 B2000400B06 B2ABF00B36 B2ABF00B12

Description Chain, 72P, 4 pitch spacing (bare) Chain, 24P, 4 pitch spacing (bare) Chain, 72P, 2 pitch spacing, anti back flex, (bare) Chain, 24P, 2 pitch spacing, anti back flex, (bare)

Ballantine, Inc. • Ditch Witch

®

Weight (lbs) 90 30 108 38

Replacement Par ts • Page 18

Sprocket Style Booms, Sprockets and Bearings for Ditch Witch® Models 2200, 2300, 2310, 3610, RT36 & Attachments H311, H312 1 2 5 3 7

)

(

4 16 10

8

9

11

15

14

12

6 13 18 17

Ref No. 1 N/S 2 3 4 5 6 N/S 7 8 9 10 11 N/S 12 13 14 N/S N/S N/S 15 16 17 18 N/S

Part No. B 140-248 B 140-241 B 115-009 B 125-209 B 115-557 B 140-013 B 140-707 B 140-654 B 140-765 B 180-062 B 180-448 B 105-313 B 140-588 B 140-585 B 142-005 B 181-267 B 105-265 B 125-002 B 125-247 B 125-246 B 180-534 B 145-173 B 167-003 B 165-901 B 170-063

Description Weight (lbs) Boom, Less Sprocket 43.7 Boom Assembly 80.3 Zerk .06 Bearing Assembly 1.5 Boom Spring 2.26 Boom Sleeve .55 Sprocket, Idler (Less Bearings) 5.7 Sprocket Assembly (includes Ref. #’s 6, 3, 8) 6.6 Slide & Stop 18.1 Dirt Shield .19 Idler Bolt for Boom End 1.13 Idler Nut .19 1' Boom Extension 20.4 2' Boom Extension 29.05 Headshaft Sprocket (Split) 5.7 Hub For Split Sprocket (13⁄4" Bore; 1⁄2"DBL Keyways) 3 Special Bolt (For Split Sprocket) .13 Bearing (Not Shown) 2 Bearing (Not Shown) .88 Bearing (Not Shown) 1 Idler Bolt, Long 1.55 Auger 25.3 Headshaft With Races & Sleeve 24.95 Key .10 Belt Set (set of 4) (not shown) 2.49

Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 19

Roller Booms, Sprockets and Roller for Ditch Witch® Models 2300, 2310, 3500, 3610, 3700, 4500 & Attachments H300, H313, H314 continued 1

2 3 8

7

(

6

Ref No. 1 N/S N/S N/S 2 N/S 3 4 5 6 7 8 9 N/S N/S N/S 10 N/S

)

Part No. B 140-503 B 140-502 B 140-509 B 140-515 B 142-752 B 142-751 B 180-448 B 105-313 B 180-062 B 125-209 B 106-034 B 106-033 B 142-025 B 142-127 B B B B

142-044 142-029 142-026 142-030

4 5

10

9

Description Weight (lbs) Roller Boom Only (47.95") (3’ Dig Depth (36T) 110 Roller Boom Assy (47.95") 170 Roller Boom Only (59.2") (4’ Dig Depth (42T) 115 Roller Boom Assembly (59.2") 164 Roller Only 26.41 Roller Assembly 27 Idler Shaft 1.13 Nut. .19 Shield .12 Bearing Assembly (2) 1 Adjustment Screw 1 x 6" 1.3 Nut (1" NC) .06 5 Drive Sprocket (12 Tooth) with ⁄8" holes 9 Drive Sprocket (12 Tooth) Split for 2” pitch – Metric (12 tooth option for H313, H314) 9 14 tooth option for H313, H314 – Metric 9 1 Drive Sprocket (12 Tooth) with ⁄2" holes 9 Dr.ive Sprocket (14 Tooth) with 5⁄8" holes 13.8 Drive Sprocket (14 Tooth) with 1⁄2" holes 13.8

continued on next page Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 20

Roller Booms, Sprockets and Roller for Ditch Witch® Models 2300, 2310, 3500, 3610, 3700, 4500 & Attachments H300 Series, H314, H514, H515, H552 continued

11

12

15

13

16

14

17

Note: H300 & H500 series can also use 3.067” Pitch Chain

Ref No. Part No. 11 B 142-021 B 142-020 12 B 142-031 13 B 181-267 14 B 105-265 15 B 142-005 16 B 105-472 17 B 105-833

Description Boom End Sprocket Boom End Sprocket Assembly with Bearings Hex Bore Auger Sprocket (H300 series) Sprocket Hub Bolt for Split Sprocket Drive Sprocket (2300, 2310, 3610) Bolt (1⁄2" NC x 5") Flange Locknut (1⁄2" NC)

Ballantine, Inc. • Ditch Witch

®

Weight (lbs)

3 .13 5.7 .02

Replacement Par ts • Page 21

2" Pitch Chain, Teeth & Accessories for Ditch Witch® Models J20, 2200, 2300, 2310, 3500, 3610 & 3700, RT36 & Attachments H300 Series, H500 Series 11

1

18

2

5

4

12

16

6 10

3 8

7

9

20

19

17 13

14 15

21 Ref No. 1 2 3 4 5 6 7 8 9 N/S N/S 10 11 12 13 13 14 15 16 17 18 19 20 21

Part No. B 135-924 B 135-925 B 105-043 B 105-111 B 105-067 B 105-082 B 135-912 B 135-950 B 135-913 B 135-914 B 135-915 B 105-002 B 105-065 B 105-076 B 135-213 B 135-210 B 135-351 B 135-358 B 135-202 B 135-202H B 135-203 B 135-501 B 135-502 2ABF-2

Smart Pt. No.

B2000400B17 B2000400B03

Description Cutter, R.H. Cutter, L.H. Bolt (1⁄2" x 1") Bolt (1⁄2" x 4") Bolt (1⁄2" x 23⁄4") Bolt (1⁄2" x 21⁄2") Adapter 8" Adapter 10" Adapter 12" Adapter 14" Adapter 16" Bolt (1⁄2" x 21⁄4") Nut (1⁄2") Bolt (1⁄2" x 3") Chain, Less Teeth 11'4" Chain, Less Teeth 2' Chain Pin Cotter Key Conn. Link Conn. Link ( 2 pitch spacing) Roller Link Ground Breaker, L.H. Ground Breaker, R.H. Chain, 2" Pitch ABF

Ballantine, Inc. • Ditch Witch

®

Weight (lbs) .9 .9 .06

2.88 3.44 4.40

.06 .06 .06 85 15 .2 .01 1 .4 1 1 1

Replacement Par ts • Page 22

Booms, Sprockets, Bearings & Belts for Ditch Witch® Models V30, R30, & 3210 2

1

3

4

7

( 11

8

5

)

6 9 10

12

13

Ref No. 1 2 N/S 3 4 N/S 5 6 7 8 9 10 11 N/S N/S N/S 12 13 14 15

Part No. B 140-765 B 140-707 B 140-654 B 140-013 B 140-006 B 140-059 B 125-209 B 115-557 B 115-009 B 105-313 B 180-448 B 180-062 B 140-553 B 140-565 B 140-554 B 140-562 B 140-704 B 142-005 B 181-267 B 140-732

14

Description

15

Weight (lbs)

Boom End 17.62 Idler Sprocket 6.50 Sprocket Assembly 7.54 Urethane Boom Sleeve .5 Boom Only 47.50 Boom Assembly With 3 Sprockets 100 Idler Bearing Assembly 1.5 Boom Spring 2.26 Zerk (1⁄4" Straight) .06 1 Jam Nut (1 ⁄4") .19 Idler Bolt. (Slide & Stop) 1.13 Dirt Shield .19 2' Boom Extension With Gussets 38 2' Boom Extension Assy (incl. ref. no.’s #2, 5, 7, 8, 9 & 10) 45 3' Boom Extension (same style as ref. #11) 50 3' Boom Extension Assy (incl. ref. no.’s #2, 5, 7, 8, 9 & 10) 60 Sprocket Drive (V30) 13⁄4" Bore; 9 Tooth, 1⁄2" DBL Keyways 7.44 Drive Sprocket, Split (V30) 6.75 Sprocket Hub (V30) 3 Drive Sprocket, Split (R30, R40 & 3210) 14 Tooth 13.75

continued on next page Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 23

Booms, Sprockets, Bearings & Belts for Ditch Witch® Models V30, R30, & 3210, continued 21

19 18

17

25 24 22

27 23

26

29

28

Ref No. 17 18 19 20 21 22 23 N/S 24 25 26 27 28 29 30 N/S

Part No. B 181-048 B 140-728 B 125-517 B 165-410 B 125-246 B 180-029 B 170-019 B 170-041 B 180-252 B 180-534 B 165-371 B 142-007 B 142-010 B 140-664 B 140-730 B 140-731A

30

Description Sprocket Hub (R30 & R40) Auger Shaft & Sprocket (R30 & R40) Pillow Block Bearing Headshaft With Races & Sleeve 12" pivot Race, Headshaft Sleeve, Headshaft V Belts (4) V Belt Set (not shown) Spacer Idler Bolt, Long (for Boom Idler) Headshaft (Fits Low Digging Attachment) Auger Sprocket (2"P) Drive Sprocket (2"P, One Piece) Hex Auger Sprocket, 2" P Idler Sprocket (14 Tooth) Idler Sprocket Assembly (B 140-659)

Ballantine, Inc. • Ditch Witch

®

Weight (lbs) 6.5 33 10.38 28 1 .25 22 1.75 .25 2.65 29

Replacement Par ts • Page 24

2" Pitch Chain, Teeth and Accessories for Ditch Witch® Models V30, R30, 3210, 3500, 3610, 3700, 4500

1

15 16 2

11

4

3

10 9

6 8 5

Ref No. 1 1 1 2 3 N/S 4 N/S 5 6 7 8 9 10 11 N/S N/S

Part No. B 135-214 B 135-212 B 135-210 2ABF-2 B 135-924 B135924516 B 135-925 B135925516 B 105-043 B 105-111 B 105-067 B 105-082 B 135-912 B 135-950 B 135-913 B 135-914 B 135-915

Smart Pt. No. B2000400B18 B2000400B06 B2000400B03

Description Chain, 12' (4 pitch spacing) Bare Chain, 4' Bare Chain, 2' Bare Chain, 2" Pitch ABF Cutter, R.H. Cutter, R.H. (HD 5⁄16" Thick) Cutter, L.H. Cutter, L.H. (HD 5⁄16" Thick) Bolts (1⁄2" x 1") Bolt (1⁄2" x 4") Bolt (1⁄2" x 23⁄4") Bolt (1⁄2" x 21⁄2") Adapter, 8" Adapter, 10" Adapter, 12" Adapter, 14" Adapter, 16"

7

Weight (lbs) 90 30 15 .9 1.0 .9 1.0 .06

2.88 3.44 4.44

continued on next page Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 25

2" Pitch Chain, Teeth and Accessories for Ditch Witch® Models V30, R30, 3210, 3500, 3610, 3700, 4500, continued

20

13

19

17

18

14 12

Ref No. 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

Part No. B 105-002 B 105-065 B 105-076 B 135-351 B 135-358 B 135-202 B 135-203 B 135-501 B 135-502 B 105-066 B 105-121 B 135-952 B 135-951 B 135-953 B 105-136 V30

24

25

27

23

26

21 22

Description Bolt (1⁄2" x 21⁄4") Nut (1⁄2" NC) Bolt (1⁄2" x 3") Chain Pin Cotter Key Conn. Link Roller Link Ground Breaker L.H. Ground Breaker R.H. Bolt (1⁄2" x 23⁄4") Bolt (1⁄2" x 2") Chain Spacer (Outside) (1.810” Long) Chain Spacer (Inside) (1.590” Long) Chain Spacer (2 Inside) (1.300” Long) Bolt (1⁄2" x 31⁄2") Flat Spacer

Ballantine, Inc. • Ditch Witch

®

Weight (lbs) .06 .06 .06 .2 .01 1 .1 1 1 .06 .06 .16 .12 .12 .06

Replacement Par ts • Page 26

Boom Sprockets, Bearings, Auger Shafts, and Accessories for Ditch Witch® Models 3610, RT36, R40, 4010 & Attachments H300 Series, H500 Series, A/H 400, A/H 500 using 2" Pitch Chain

1

2

4

3

7

5

6

8 9

10

11

17 14 12 16 13

Ref No. 1 N/S 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

15

Part No. B 140-707 B 140-654 B 125-209 B 180-448 B 105-313 B 180-062 B 140-732 B 181-048 B 105-302 B 105-385 B 180-057 B 145-475 B 155-703 B 155-805 B 125-259 B 125-258 B 180-071 B 140-728

Description Idler Sprocket Idler Sprocket Assembly (Includes Ref. #’s: 1, 2, 5) Bearing Assembly Idler Shaft (slide and stop) Idler Nuts Idler Shields Drive Sprocket (Split) Sprocket Hub Bolts (5⁄8" x 2") Lock Washer (5⁄8") Seal Spacer Washer, Pivot Tube O-Ring Seal Bearing Race Backup Ring Auger Shaft & Sprocket

Weight (lbs) 6.5 7.5 1 1.1 .19 19 14 3.5 .25 .06 2.1 .03 .10 .10 1.5 .10 .13 33

continued on next page

Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 27

Boom Sprockets, Bearings, Auger Shafts, and Accessories for Ditch Witch® Models 3610, RT36, R40, 4010 & Attachments H300 Series, H500 Series, A/H 400, A/H 500 using 2" Pitch Chain, continued 24

20

18

19

23

22

21

25 30 29 28

26

27 32

31

Ref No. 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Part No. 145-071 145-110 145-070 145-109 125-517 105-320 130-307 130-304 130-305 125-502 170-038 170-059 181-051 165-368 142-007

B B B B B B B B B B B B B B B

Description Auger, L.H. Auger, L.H. (Short) Auger, R.H. Auger, R.H. (Short) Pillow Block Bearings 13⁄4" I.D. Bolt (3⁄4" x 21⁄4" NC) Drive Chain (80-80P) Connector Link (#80) Offset Link (#80) 11⁄4" P.B. Bearing Power Band V Belts (2 Belts) – 4 grooves each Power Band V Belts (4 Belts) – 2 grooves each Shield (R40) Shaft Auger Sprocket

Weight (lbs) 53 53 10.5 .25 11.5 .13 .17 7.0 2.0 2.0 .06 4.0 19

continued on next page

Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 28

Boom Sprockets, Bearings, Auger Shafts, and Accessories for Ditch Witch® Models 3610, RT36, R40, 4010 & Attachments H300 Series, H500 Series, A/H 400, A/H 500 using 2" Pitch Chain, continued

33

34

35

37

36

39

38

42

43

44

40 41

Ref No. 33 34 35 36 N/S 37 38 39 40 41 42 43 44

Part No. B 180-534 B 165-371 B 142-010 B 140-730 B 140-731A B 140-664 B 125-620 B 145-244 B 110-363 B 110-364 B 125-048 B 142-031 B 105-313

Description Idler Shaft, Long Headshaft (Fits Low Digging Attachments) One piece Drive Sprocket, 14T Idler Sprocket (14 Tooth) Idler Sprocket Assembly (B 140-659) Auger Sprocket, 2" P Hex Bearing Assembly Hex Auger Shaft Flange (LS) Flange (NLS) Hex Bearing Auger Sprocket (H312) Idler Nut

Ballantine, Inc. • Ditch Witch

®

Weight (lbs) 2.0 29

Replacement Par ts • Page 29

2" Pitch Chain,Teeth & Accessories for Ditch Witch® Models R40, 3210, 3500, 3700, 4010, 4500, RT36, RT40 1

15 2

16

13

4

3

10 6

9

14 7 5

Ref No. 1 1 1 1 2 3 N/S 4 N/S 5 6 7 8 9 10 11 N/S N/S 12 13 14 15 16

Part No. B 135-214 B 135-212 B 135-211 B 135-210 2ABF-2 B 135-924 B135924516 B 135-925 B135925516 B 105-043 B 105-111 B 105-067 B 105-082 B 135-912 B 135-950 B 135-913 B 135-914 B 135-915 B 105-002 B 105-065 B 105-076 B 135-351 B 135-358

8

11

12

Smart Pt. No. B2000400B18 B2000400B06 B2000400B04 B2000400B03

Description Chain 12' Less Teeth (4 Pitch Spacing) Chain 4' Less Teeth Chain 2' 8" Less Teeth Chain 2' Less Teeth Chain 2" Pitch ABF Cutter, R.H. Cutter, R.H. (HD 5⁄16" Thick) Cutter, L.H. Cutter, L.H. (HD 5⁄16" Thick) Bolts (1⁄2" x 1") Bolt (1⁄2" x 4") Bolt (1⁄2" x 23⁄4") Bolt (1⁄2" x 21⁄2") Adapters, 8" Adapters, 10" Adapters, 12" Adapter, 14" Adapter, 16" Bolt (1⁄2" x 21⁄4") Nut (1⁄2" N.C) Bolt (1⁄2" x 3") Chain Pin Cotter Key

Weight (lbs) 90 30 20 15 .9 1.0 .9 1.0 .06

2.88 3.44 4.44

.06 .06 .2 .2 .01

continued on next page Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 30

2" Pitch Chain,Teeth & Accessories for Ditch Witch® Models R40, 3210, 3500, 3700, 4010, 4500, RT36, RT40, continued

18

27 17

28

20

19

26 21

Ref No. 17 18 19 20 21 22 23 24 25 26 27 28

Part No. B 135-202 B 135-203 B 135-501 B 135-502 B 105-066 B 105-121 B 135-952 B 135-951 B 135-953 B 105-136 B135-202H V30

25

24

23

22

Description Conn. Link Roller Link Ground Breaker L.H Ground Breaker R.H. Bolt (1⁄2" x 13⁄4") Bolt (1⁄2" x 1") Chain Spacer (Outside) (1.810” Long) Chain Spacer (Inside) (1.590” Long) Chain Spacer (2 Inside) (1.300” Long) Bolt (1⁄2" x 31⁄2") Connecting Link (2 pitch chain) Flat Spacer

Weight (lbs) 1 .117 1 1 .06 .06 .16 .16 .16 .06 1.75

Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 31

2" Pitch Anti-Back Flex Chain and Accessories for Ditch Witch® Models J20, 2200, 2300, 2310, 3500, 3700,V30, R30, R40, 3210, 3610, 4010, 4500

1

4 9

5

11

10

3

2 7

8

6

Ref No. 1 1 1 1 1 2 3 4 5 6 7 8 N/S N/S 9 10 N/S 11 N/S

Part No. B 137-218 B 137-215 B 137-216 B 137-217 B 137-219 B 137-202 B 137-203 B 137-351 B 137-207 B 135-912 B 135-950 B 135-913 B 135-914 B 135-915 B 105-002 B 135-924 B135924516 B 135-925 B135925516

Smart Pt. No. B2ABF00B34 B2ABF00B36 B2ABF00B12 B2ABF00B06 B2ABF00B08

Description ABF Chain, 11' 4" Bare ABF Chain, 12' Bare ABF Chain, 4' Bare ABF Chain, 2' Bare ABF Chain, 2' 8" Bare Connecting Link Roller Link Pin & Cotter Lock Key Adapters, 8" Adapters, 10" Adapters, 12" Adapter, 14" Adapter, 16" Bolt (1⁄2" x 21⁄4") Cutter, R.H. Cutter, R.H. (HD 5⁄16" Thick) Cutter, L.H. Cutter, L.H. (HD 5⁄16" Thick)

Weight (lbs) 100 108 36 18 24 1.75 1.2 .21 .01 2.88 3.44 4.44

.06 .9 1.0 .9 1.0

continued on next page Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 32

2" Pitch Anti-Back Flex Chain and Accessories for Ditch Witch® Models J20, 2200, 2300, 2310, 3500, 3700,V30, R30, R40, 3210, 3610, 4010, 4500, continued

20

16 12

14

19

21 22

15

18

17

23

13

25 24

Ref No. 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

26

Part No. B 105-043 B 105-065 B 105-066 B 105-121 B 105-076 B 135-952 B 135-951 B 135-953 B 105-136 B 105-111 B 105-067 B 105-082 B 135-501 B 135-502 V30

Description Bolt (1⁄2" x 11⁄4") Locknut Bolt (1⁄2" x 13⁄4") Bolt (1⁄2" x 1") Bolt (1⁄2" x 3") Chain Spacer (Outside) (1.810” Long) Chain Spacer (Inside) (1.590” Long) Chain Spacer (2 Inside) (1.300” Long) Bolt (1⁄2" x 31⁄2") Bolt (1⁄2" x 4") Bolt (1⁄2" x 23⁄4") Bolt (1⁄2" x 21⁄2") Ground Breaker, L.H. Ground Breaker, R.H. Flat Spacer

Weight (lbs) .06 .06 .06 .06 .16 .16 .16 .06

1 1

Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 33

Chains for Ditch Witch® Large Riding Trenchers

1

2

3

4

5

Ref No. 1 2 3 4 5

Part No. B 135-704 B 135-411 B 135-411-4 B 137-411 N/A

Smart Pt. No. B3067LD00B32 B3067HD00B32 B30670400B16 B3067ABF00B32 TA311000B32

Description Weight (lbs) 70,000 Lb. Chain, Bare, 64 pitches (2P) 256 110,000 Lb. Chain, Bare, 64 pitches (2P) 288 110,000 Lb. Chain, Bare, 64 pitches (4P) 210 110,000 Lb. Anti back-flex Chain, Bare, 64 pitches (2P) 298 165,000 Lb.Trench-All® Chain, Bare, 64 pitches (2P) 300

Note: The Trench-All® Chain lines are specifically engineered for today’s higher horsepower trenchers and their roller style booms. All Trench-All® Chains are extra heavy duty anti back-flex chains with raised rivet design. Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 34

Boom Sprockets, Bearings, Augers, and Accessories for Ditch Witch® Models R30, R40, 3210, 4010 & Attachments H300, A/H400, A/H500 using 3" Pitch Chain 2

1

7

5

9 8

6

10

4

3 11

13

15

14

12 16 17 18

19

20

22

Ref No. 1 N/S 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

21

23

Part No. B 140-723 B 140-656 B 125-263 B 180-026 B 155-843 B 180-243 B 115-470 B 180-244 B 180-440 B 180-441 B 105-377 B 140-717 B 181-048 B 105-302 B 105-385 B 180-057 B 145-475 B 155-703 B 155-805 B 125-259 B 125-258 B 180-071 B 145-071 B 145-070

Description Weight (lbs) Idler Sprocket 26.5 Idler Sprocket Assembly 25.0 Bearing, Idler Sprocket (Incl: Part #125-265 & 125-266) 1.5 Spacer .1 Seal .06 Bearing Spacer .31 Retaining Ring .01 Spacer .10 Idler Shaft (Slide & Stop) 3 Idler Shaft (Boom) 3.0 Idler Shaft Nut .5 Headshaft Sprocket (Split) 15.0 Sprocket Hub 7.0 Bolt (5⁄8" x 2") .25 5⁄8" L.W. .06 Seal Spacer 2.1 Washer, Pivot Tube .03 O-Ring .1 Seal .25 Bearing 1.5 Race 1 Backup Ring .13 Auger, L.H. 53 Auger, R.H. 53

continued on next page Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 35

Boom Sprockets, Bearings, Augers, and Accessories for Ditch Witch® Models R30, R40, 3210, 4010 & Attachments H300, A/H400, A/H500 using 3" Pitch Chain, continued 29

24

26

25 27

30 28 32

33

35 31

34

40 41 36 37

38 39

Ref No. 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41

Part No. 145-109 145-110 125-517 105-320 140-725 130-307 130-304 135-305 125-502 170-038 142-009 140-665 142-008 125-048 125-620 145-244 110-363 110-364

B B B B B B B B B B B B B B B B B B

Description Auger R.H., Short Auger L.H., Short Pillow Block Bearing Bolt (3⁄4" x 21⁄4") Auger Sprocket & Shaft Drive Chain (#80-80P) Connector Link (#80) Offset Link (#80) 11⁄4" Pillow Block Bearing Power Band V Belts Headshaft Sprocket (One piece) Hex Auger Sprocket Auger Sprocket Hex Bearing Hex Bearing Assembly Hex Auger Shaft Flange (LS) Flange (NLS)

Ballantine, Inc. • Ditch Witch

®

Weight (lbs)

10.5 .25 35.0 11.5 .13 .17 6.88 1.85

Replacement Par ts • Page 36

Sprockets, Rollers & Bearings for Ditch Witch® Alligator Boom Using 3.067 Pitch Chain for A/H500, A615, 510A

13

Ref No. 14 / Part No. B140-661 Bearing Kit for Item #13, Roller (for individual breakdown of Bearing Kit Parts, see pg 41 Ref No.’s 7-13)

1 7

3

8 6

9 11 10

2 12

Ref No. Part No. 1 B 142-012 B 142-011 2 B 145-589 3 B 155-852 4 B 180-441 5 B 180-440 6 B 181-697 7 B 181-698 8 B 181-699 9 B 115-470 10 B 125-216 11 B 125-265 12 B 105-377 13 B 142-756 B 142-756A 14 B 140-661

4

Description Idler Sprocket, Less Bearings – 19 Tooth, 20" O.D. Idler Sprocket Assembly Plastic Washer External Seal (for ref. #1, Sprocket) Shaft (43⁄8" Long) Shaft (47⁄8" Long) Bearing Spacer (for ref. #1, Sprocket) Seal Spacer (for ref. #1, Sprocket) Seal Sleeve (for ref. #1, Sprocket) Snap Rings (for ref. #1, Sprocket) Bearing Race (for ref. #1, Sprocket) Bearing (for ref. #1, Sprocket) Nut Roller Only, 17" Roller Assembly, 17” Bearing Kit

5

Weight (lbs) 52 54 .08 .06 2.75 3 .05 .3 .3 .06 .63 1 .50

Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 37

Chain,Teeth & Accessories for Ditch Witch® Models R40, 4010, R60, R65, 5010, 5110, RT55, 6510, 7510, RT75, 7610, 8020, RT95, RT115 & Attachments A/H400, A/H500, H700 using 3" Pitch Chain 11

12

2 1

3

8

9

10

7 6

5 4

Ref No. 1 2 3 NS 4 5 6 N/S N/S N/S 7 8 9 10 11 11 11 12 12 12

Part No. 135-911 135-910 135-921 135-960 135-901 135-902 135-903 135-904 135-905 135-906 105-319 105-320 105-326 105-327 135-704 135-702 135-701 135-411 135-410 135-412

B B B B B B B B B B B B B B B B B B B B

Smart Pt. No.

B3067LD00B32 B3067LD00B08 B3067LD00B04 B3067HD00B32 B3067HD00B08 B3067HD00B04

Description Cutter, L.H. Cutter, R.H. Spacer,Tooth 8" (3⁄8") Spacer,Tooth (1⁄8") (70,000#) Adapter 10" (136-071) Adapter 12" (136-120) Adapter 14" (136-088) Adapter 16" Adapter 18" (136-089) Adapter 20" Bolt (3⁄4" x 11⁄2") Bolt (3⁄4" x 21⁄4") Bolt (3⁄4" x 3") Bolt (3⁄4" x 4") Chain, 16' Less Teeth (70,000# Chain) Chain 4' Less Teeth (70,000# Chain) Chain 2' Less Teeth (70,000# Chain) Chain 16' Less Teeth (110,000# Chain) Chain 4' Less Teeth (110,000# Chain) Chain 2' Less Teeth (110,000# Chain)

Weight (lbs) 2.25 2.25 .75 8.0 9.5 10.75 12 13.47 14.84 .25 .25 .25 .25 256 60 30 288 72 34

continued on next page

Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 38

Chain,Teeth & Accessories for Ditch Witch® Models R40, 4010, R60, R65, 5010, 5110, RT55, 6510, 7510, RT75, 7610, 8020, RT95, RT115 & Attachments A/H400, A/H500, H700, continued

25

16 15 14

13

22 17

21

20

24 19

23

18

Ref No. 13 14 15 16 17 18 19 20 21 22 23 24 25

Part No. B 135-503 B3067LDCL B 135-402 B 135-501 CP B 105-372 B 501 B 502 B 135-404 B 135-401 3067HDCL B 2109-911 B 2108-910 B 135-411-4

Smart Pt. No.

B30670400B16

Description Roller Link (70,000#) Conn. Link (70,000#) Lock Key Chain Pin (70,000#) Lock Nut (3⁄4") Ground Breaker, L.H. Ground Breaker, R.H. Roller Link (110,000#) Chain Pin (110,000#) Conn. Link (110,000#) Super Tooth, L.H. Super Tooth, R.H. Chain 16' Every 4th Pitch (110,000# Chain)

Weight (lbs) 2.85 .03 .4 .10 1.3 1.3 3.40 3.4 3.5 3.5

Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 39

3.067" Pitch Anti-Back Flex Chain for Ditch Witch® Models R60, R65, 5010, 5110, RT55, 6510, 7510, RT75, 7610, 8020, RT95, RT115, & Attachments A/H400, A/H500, H700 11 12 3 15

2

9

8

10

1 7

4

13

6

5

14 16 20 18

19

17

Ref No. 1 2 3 4 5 6 N/S N/S N/S 7 8 9 10 11 11 11 12 13 14 15 N/S N/S N/S N/S N/S 16 17 18 19 20

Part No. B 135-911 B 135-910 B 135-921 B 135-901 B 135-902 B 135-903 B 135-904 B 135-905 B 135-906 B 105-319 B 105-320 B 105-326 B 105-327 B 137-411 B 137-410 B 137-412 B 137-401 B 137-404 B 137-405 B 137-402 B 135-961 B 135-962 B 135-979 B 135-977 B 140-120 B 105-372 B 501 B 502 B 2109-911 B 2108-910

Smart Pt. No.

B3067ABF00B32 B3067ABF00B08 B3067ABF00B04

Description Cutter, L.H. Cutter, R.H. Spacer,Tooth 8" (3⁄8") Adapter 10" (136-071) Adapter 12" (136-120) Adapter 14" (136-088) Adapter 16" Adapter 18" (136-089) Adapter 20" Bolt (3⁄4" x 11⁄2") Bolt (3⁄4" x 21⁄4") Bolt (3⁄4" x 3") Bolt (3⁄4" x 4") ABF Chain 16' Less Teeth ABF Chain 4' Less Teeth ABF Chain 2' Less Teeth Chain Pin Roller Link Connecting Link Key Chain Spacer – .8" Chain Spacer – 1.9" Chain Spacer – 2.16" Chain Spacer – 2.34" Boom Gussets Lock Nut (3⁄4") Ground Breaker, L.H. Ground Breaker, R.H. Super Tooth, L.H. Super Tooth, R.H.

Ballantine, Inc. • Ditch Witch

®

Weight (lbs) 2.14 2.14 .75 8 9.3 10.75 12 13.47 14.84 .25 .25 .45 .6 269 67.2 33.6 .5 4.25 51 .05

.10 1.3 1.3 3.5 3.5

Replacement Par ts • Page 40

Boom Parts, Sprockets, Bearings, and Accessories for Ditch Witch® Models R40, R60, R65, 4010, 5010, 6510, 7510, 7610, 8020 & Attachments A/H400, A/H500, H700 3

1

2 4 7

9

6 8

19 23

13

10

12 14

18 17

5

11

20

22

21 24

16

15

Ref No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

*

N/S

Part No. B 140-013 B 140-021 B 140-758 B 180-440 B 105-377 B 140-723 B 140-656 B 180-244 B 180-243 B 180-026 B 155-843 B 125-265 B 125-266 B 115-470 B 180-441 B 150-191 B 150-340 B 150-058 B 155-711 B 155-712 B 115-001 B 105-367 B 105-419 B 140-730 B 140-731A B 142-756 B 142-756A B 140-661 B 140-120

Description Weight (lbs) Boom Sleeve .5 Boom Spring .80 Slide & Stop 25.60 Idler Shaft (Slide & Stop) 3 Nut .50 Idler Sprocket (Bearing Kit for Idler Sprocket: see * below) 26.50 Idler Sprocket Assy, (Includes Sprocket & #’s 7-13) 24.75 Spacer Bearing .10 Spacer Bearing .31 Fiber Spacer .10 Seal .15 Bearing 1 Race .6 Retaining Ring .01 Idler Shaft (Boom – Idler) 2.75 Grease Cylinder Barrel 3.50 Grease Cylinder Rod 5.10 Grease Cylinder Assembly 11 O Ring .03 Back-up Ring .1 1 Zerk ( ⁄8") .06 Lock Nut (1" NC) .25 Bolt (1" NC X 4") 1.13 Idler Sprocket (2" P) Idler Sprocket Assembly (14T) (140-659) 17" End Roller 17" End Roller Assembly Bearing Kit (includes Reference #’s 7-13) Boom Gussets

Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 41

Auger Parts & Accessories for Ditch Witch® Models R40, R60, R65, 4010, 5010, 6510, 7510, 8020 & Attachments A/H400, A/H500, H700 (3" P) 1

2

5 10 9

4

3

7 8

6 11 12 13

16

14 15

20

19

17

21

18

Ref No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

Part No. B 145-070 B 145-071 B 145-109 B 145-110 B 105-407 B 105-357 B 115-001 B 125-517 B 105-466 B 105-372 B 105-384 B 140-725 B 142-008 B 165-368 B 145-244 B 140-665 B 110-363 B 110-364 B 125-620 B 125-048 B 145-248

Description Auger, R.H. (24") Auger, L.H. (24") Auger, R.H. (12") Auger, L.H. (12") Bolt, (5⁄8" x 4") Lock Nut (5⁄8") Zerk Pillow Block Bearing, 13⁄4" I.D. Bolt (3⁄4" x 2 1/2") Lock Nut (3⁄4") Washer (3⁄4") Auger Sprocket & Shaft Auger Sprocket Auger Shaft Hex Auger Shaft Auger Sprocket, Hex Flange (LS) Flange (NLS) Hex Bearing Assembly Hex Bearing Hex Sprocket Hub

Ballantine, Inc. • Ditch Witch

®

Weight (lbs) 53 53 28 28 .50 .06 .06 10.5 .5 .06 .06 35.0 23.9 15

Replacement Par ts • Page 42

Drive Sprocket Head Shaft, Components for Ditch Witch® Models R40, R60, R65, 4010, 5010, 6510, 7510, 7610, 8020 & Attachments A/H400, A/H500, H700 4

2

5

1

6 3 12 7

13

10

17

11

8

14 9

15 16

18

21

19 20

Ref No. 1 2 3 4 5 6 7 8 9 10 N/S 11 N/S N/S 12 13 14 15 16 17 18 19 20 21

Part No. B 180-055 B 140-717 B 105-302 B 180-057 B 155-703 B 145-475 B 155-805 B 125-259 B 125-258 B 180-071 B 145-476 B 105-384 B 105-364 B 180-064 B 165-329 B 165-903 B 165-904 B 165-905 B 165-907 B 175-604 B 115-003 B 105-313 B 180-062 B 141-589

Description Sprocket Hub Split Sprocket Bolt 5⁄8" x 2" Spacer Seal O Ring Washer Seal Bearings Race Backup Ring Washer 3⁄4" Washer Bolt 3⁄4" X 2" Washer 13⁄16" I.D. x 3" O.D. x 1⁄2" Drive Shaft Key (5⁄8" Sq. x 43⁄8" Lg.) Key (5⁄8" Sq. x 37⁄8" Lg.) Key (3⁄4" X 5⁄8" x 31⁄4") Key (5⁄8" R2 x 3⁄8") Sprocket (100 Q 32) Zerk (1⁄4 N.F. Str.) Nut Dirt Shield Sprocket Split Drive 11 Tooth RT75, RT95, RT115 (Attachments: H910, H911, M910)

Weight (lbs) 3.5 15 .25 2.0 .06 .03 .25 1.5 1 .13 .20 .06 .25 .62 38 .25 .25 .25 .10 26.5 .03 .19 .19

continued on next page Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 43

Drive Sprocket Head Shaft, Components for Ditch Witch® Models R40, R60, R65, 4010, 5010, 6510, 7510, 7610, 8020 & Attachments A/H400, A/H500, H700, continued

22 21

24

23

25

26

Ref No. 21 22 N/S N/S N/S N/S 23 24 N/S 25 N/S 26

Part No. 125-209 175-605 175-608 130-404 130-402 130-401 170-038 170-059 170-609 142-009 175-509 165-379

B B B B B B B B B B B B

Description Bearing Assembly Sprocket (100-B14) Sprocket Assembly Chain (100-65 Pitches) Offset Link Connector Link Power Band V Belts — 2 Belts Power Band V Belts — 4 Belts Sprocket #100 Q 34 Sprocket (1 Piece) Idler Sprocket #80 – 16 Tooth Drive Shaft for offset machine

Ballantine, Inc. • Ditch Witch

®

Weight (lbs) 1 4.75 6 20 .35 .25 1.85 1.96 28 16

Replacement Par ts • Page 44

Ultra Heavy-Duty Trench-ALL® 3110 Digging Chain & Accessories (165,000# Test Chain) Replaces 3.067" Pitch Chain 1

3

2

4

5 6

11

8 7

10 9

Ref No. 1 2 3 4 5 6 7 8 9 10 11

Part No.

Smart Pt. No.

TA 3110 TA 3110 TA 3110 TA 3110 TA 3110 TA 3110 TA 4134 TA 4134 TA 4134 TA 4134 SP 200

TA311000B_ _ PC CT RL RPL CL L R LPL LPR

Description Bare Chain Chain Pin w/Cotter Cotter Only Roller Link Repair Link Conn. Link Cup Cutter, L.H. Cup Cutter, R.H. Cup Cutter L.H. (Low Profile) Cup Cutter R.H. (Low Profile) 2" Alloy Tube Spacer

Weight (lbs)

Note: No sprocket conversion required.

continued on next page Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 45

Ultra Heavy-Duty Trench-ALL® 3110 Digging Chain & Accessories (165,000# Test Chain) Replaces 3.067" Pitch Chain, continued

14 12

20 19

13

15

18 17

16

22

23

24

21

Ref No. 12 13 14 15 16 17 18 19 20 21 22 23 24

Part No. SP 238 SP 218 34 FW 34 LW 34 LN 34412-8 34500-8 34512-8 34600-8 PL 4134-12 PL 4134-14 PL 4134-16 BL 3110-10

Smart Pt. No.

Description 23⁄8" Alloy Tube Spacer 21⁄8" Alloy Tube Spacer 3⁄4" Flat Washer 3⁄4" Lock Washer 3⁄4" Lock Nut 3⁄4" x 41⁄2" Gr. 8 Bolt 3⁄4" x 5" Gr. 8 Bolt 3⁄4" x 51⁄2" Gr. 8 Bolt 3⁄4" x 6" Gr. 8 Bolt 12" Cup Cutter Expander 14" Cup Cutter Expander 16" Cup Cutter Expander Block Spacer – Space for 2" Additional Cut

Ballantine, Inc. • Ditch Witch

®

Weight (lbs)

Replacement Par ts • Page 46

Chains for Ditch Witch® Models R100, AR12, RT115 (Largest Riding Trenchers)

1

2

Ref No. 1 1 2 2

Part No. B 135-812 B 135-808 N/A N/A

Smart Pt. No. B450000B24 B450000B06 TA408600B26 TA408600B07

Description 150,000 Lb. Chain, Bare, 18', 48 pitches, (2P) 150,000 Lb. Chain, Bare, 4.5'’, 12 pitches, (2P) 225,000 Lb. Chain, Bare, 18', 52 pitches, (2P) 225,000 Lb. Chain, Bare, 4.5', 14 pitches, (2P)

Weight (lbs) 360 90

Note: The Trench-All® Chain lines are specifically engineered for today’s higher horsepower trenchers and their roller style booms. All Trench-All® Chains are extra heavy duty anti back-flex chains with raised rivet design.

Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 47

Chain,Teeth & Adapters (4.5" Pitch, 150,000# Test Chain) for Ditch Witch® Model R100, AR12 1

6 2

8

7 4 3

5 10

9 12 11

13

16 14

Ref No. 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Part No. B 135-812 B 135-808 B 105-372 B 105-383 B 105-464 B 105-473 B 135-801 B 135-802 B 135-805 R100CL B 136-009 B 136-045 B 136-046 B 136-064 B 136-010 B 136-012 B 136-014

15

Smart Pt. No. B450000B24 B450000B06

Description Weight (lbs) 18' Chain, Bare 360 4' 6" Chain, Bare 90 Locknut (3⁄4") .10 Bolt (3⁄4" x 6") .81 Bolt (3⁄4" x 7") 1.00 Bolt (3⁄4" x 5") .75 Chain Pin .6 Lock Key .05 Roller Link 5.5 Conn. Link Tooth Spacer (2 pcs. = 10" Width • 4 pcs. - 12" Width) 2.29 Cutter, L.H. 6.5 Cutter, R.H. 6.5 Chain Spacer .3 14" - 16" Adapter 18" - 20" Adapter 22" - 24" Adapter

Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 48

Boom Sprockets, Auger Sprockets, and Drive Sprockets and Accessories for Ditch Witch® Model R100, AR12

3

2

1

4

5 7

6

9 8

11 12

10

15 13

Ref No.

1 N/S 2 3 4 5 6 7 8 9 10 11 N/S 12 N/S 13 14 15 N/S N/S N/S

14

Part No.

Description

B B B B B B B B B B B B B B B B B B B B B

Idler Sprocket Idler Sprocket Assembly Snap Ring Snap Ring Bearing Races Urethane Spacer Seals Seal Ring Idler Shaft Nut Split Drive Sprocket (4.5"P Chain) Split Drive Sprocket (3"P Chain) Auger Sprocket & Shaft (4.5"P Chain) Auger Sprocket & Shaft (3"P Chain) Pillow Block Bearing (21⁄4" I.D.) Bolt (5⁄8" X 3") Locknut (5⁄8") Chain #100-2 96P (used with Auger Setup) Chain #100-2 120P (used with Conveyor Setup) Belt Set of 4

142-001 140-658 115-498 115-492 125-287 125-288 145-475 155-870 180-165 183-064 105-377 140-739 140-747 140-742 140-749 125-514 105-376 105-357 130-412 130-413 170-052

Weight (lbs)

71.5 84 .05 .06 2.50 1.19 .03 .25 .5 4.50 .50 63 102 14.5 .25 .06

6

Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 49

Ultra Heavy-Duty Trench-ALL® 4086 Digging Chain & Accessories (225,000# Test Chain) Replaces 41⁄2" Pitch – 150,000# Test Chain

1

3 2

4

5

9

11

12 10

Ref No. 1 2 3 4 5 6 7 8 9 10 11 12 13

8

7

6

Part No.

Smart Pt. No.

Description

TA 4086 TA 4086 RL TA 4086 RPL TA 4086 PC TA 4134 L TA 4134 R B 136-045 B 136-046 SP 2116 SP 2716 SP 238 SP 11516 34 FW

TA408600B_ _

Bare Chain Roller Link Repair Link Chain Pin with keeper Cutter L.H. Cutter R.H. Cutter, L.H. Cutter, R.H. 21⁄16” Alloy Tube Spacer 27⁄16” Alloy Tube Spacer 23/8” Alloy Tube Spacer 115⁄16” Alloy Tube Spacer 3⁄4” Flat Washer

13

Weight (lbs)

continued on next page Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 50

Ultra Heavy-Duty Trench-ALL® 4086 Digging Chain & Accessories (225,000# Test Chain) Replaces 41⁄2" Pitch – 150,000# Test Chain, continued

18

19

14 16

17

15

20 21

22

Ref No. 14 15 16 17 18 19 N/S 20 21 22 23 N/S N/S N/S N/S

Part No. 34 LW 34 LN 34412-8 34500-8 34512-8 34600-8 34 HCCBS H 180 L H 180 R H 290 L H 290 R H 345 L H 345 R H 400 L H 400 R

23

Description Lock Washer 3⁄4” Lock Nut 3⁄4” x 4 1⁄2" Gr. 8 Bolt 3⁄4” x 5" Gr. 8 Bolt 3⁄4” x 51⁄2" Gr. 8 Bolt 3⁄4” x 6" Gr. 8 Bolt 3⁄4” Bolt Seat for 100MM Cup Cutter 10" Cutter, L.H. 10" Cutter, R.H. 12" Cutter, L.H. 12" Cutter, R.H. 14" Cutter, L.H. 14" Cutter, R.H. 16" Cutter, L.H. 16" Cutter, R.H.

Weight (lbs)

3⁄4”

Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 51

Ultra Heavy-Duty Trench-ALL® 4086 Digging Chain & Accessories (225,000# Test Chain) Replaces 41⁄2" Pitch – 150,000# Test Chain, continued

25

24

26

27

28

30

29

Ref No. 24 25 26 N/S 27 28 N/S 29 30

Part No.

Description

PL 4115-12 PL 4115-14 PL 4115-16 PL 4115-18 TSDW 40161D TSDW 40162I TSDW 40162IA TSDW 40163A BL 4086-10

12” Cup Cutter Expander Plate 14” Cup Cutter Expander Plate 16” Cup Cutter Expander Plate 18” Cup Cutter Expander Plate Drive Sprocket (Split) Idler Sprocket Idler Sprocket Assembly Auger Sprocket and Shaft Block Spacer - 2” Additional Cut

Weight (lbs)

Note: Sprocket conversion required

Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 52

Rock & Frost Section 1

4

3

2

11 7

6

5

12

8

13

9

14

10

Ref No.

1 2 3 4 5 6 7 8 9 N/S 10 N/S 11 12 13 N/S N/S N/S 14

Note:

Part No.

Description

B56KRB B43KRB B56-B B43-B B56-C B43-C CB43-10 CB56-10 Puller Puller N/A N/A B43LH B43LRB B43LW C31HD C31 .990 CRF B 43 CW

Carbide Tooth, Rockbuster (.765 HB) Carbide Tooth, Rockbuster (.735 HB) Carbide Tooth, Full Cap (.765 CB) Carbide Tooth, Full Cap (.735 CB) Carbide Tooth, Half Cap (.765 MB) Carbide Tooth, Half Cap (.735 MB) Tooth Pockets (.735 BLK) Tooth Pockets (.765 BLK) Tooth Puller (Standard) Tooth Puller (Large) Chain Installer, Small (1.654" through 2") Chain Installer, Large (3" through 4") Carbide Tooth 1/2 Cap w/clip (.735 MRW) Carbide Tooth Rockbuster w/Clip (.735 HR) Lock Washers (K 91) Carbide Tooth, Rockbuster (.990 HB) Carbide Tooth, Half Cap (.990 MB) Carbide Tooth, Full Cap with Flared Shoulder Clip Wrench

Weight (lbs)

We have all styles and sizes of Carbide Bits

Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 53

Terminator®, Alligator and Bolt-on Rock & Frost Chain,Teeth & Adapters for Ditch Witch® Walk Along Models Using 1.654" Pitch Chain & Accessories 3

4

1 5

2

14

13 15 12

7

16

26

11

10

9

8

6

17

18

25 23 21

20

19

24

22

27

28

Ref No.

Part No.

Smart Pt. No.

Description

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

N/A N/A B 135-316 B 135-317 B 135-318 B17 B17-D B17-10 T165404C T165404L T165404R TT1654 B 135-319 B 135-320 B 135-936 B 135-937 B 135-938 B 136-027 B 136-029 B 105-162 B 105-915 B 105-916 B 105-917 38LW B 105-047 B 105-101 B 059-360 B 135-001

SH16540426 AL16540426

1.654”P Welded Terminator Chain, 4” Cut, 26 Stations 1.654”P Welded Alligator Chain, 4” Cut, 26 Stations Bit Adapter Center Bit Adapter L.H. Bit Adapter R.H. Carbide Bit Lockwasher Tooth Holder Terminator Adapter, Center Terminator Adapter, L.H. Terminator Adapter, R.H. Terminator Tooth Only Tubular Spacer (Used with Bit Adapter on Inside) Tubular Spacer (Used with Bit Adapter on Outside) Flat Spacer (3⁄8") (28,000 Lb. - Chain Only) 5" Flat Spacer (28,000 Lb. Chain Only) 6" Flat Spacer (28,000 Lb. Chain Only) 5" Flat Spacer (34,000 & 38,000 Lb. Chain) 6" Flat Spacer (34,000 & 38,000 Lb. Chain) Bolt 3⁄8" x 21⁄4" Used with Bit Adapter on Inside Bolt 3⁄8" x 23⁄4" Used with Bit Adapter on Outside Bolt 3⁄8" x 41⁄2" Used with Spacer for 5" Cut Bolt 3⁄8" x 51⁄2" Used with Spacer for 6" Cut Lock Washer 3⁄8" Locknut 3⁄8" Flat Washer 3⁄8" Half Link with Connecting Pin (28,000 Lb. Chain Only) Connector Pin with Keeper (All Chains)

Note:

Weight (lbs)

.5 .5 .5 .2 .02 .75 .75 .75 .3

For additional bare chain components, see walk-along section.

Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 54

Terminator®, Alligator and Bolt-on Rock & Frost Chain,Teeth & Adapters (2" Pitch, 50,000 Lb.Test Chain) for Ditch Witch® Models V30, R30, 2300, 2200, 2310, R40, J20, 3500, 3610, 3700, R40, 4500, 4010

1

2

3

4

6

5

11

7 9 8

10 13

Ref No.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

12

14

15

Part No.

Smart Pt. No.

Description

N/A N/A T 20034 T 20078 765 BLK 765 HDBLK B 105-065 B 105-076 B 105-110 B 105-111 B 135-952 B 135-043 B 135-958 B 135-959 B 135-058

SH20000636 AL200006D36

2” P Welded Terminator Chain, 6” Cut, 36 Stations 2” P Welded Alligator Chain, 6” Cut, 36 Stations Terminator Tooth, 3⁄4”V-Carbide Terminator Tooth, 7/8”V-Carbide Tooth Holder Heavy-Duty Tooth Holder 1⁄2" Locknut (1⁄2" x 3") Bolt (1⁄2" x 41⁄2") Bolt (1⁄2" x 4") Bolt Chain Spacer (Used with Bit Adapter on Outside) Chain Spacer (Used with Bit Adapter on Inside) Carbide Bit Half Cap (B56-C) (765 MB) Carbide Bit Full Cap (B56-B) (765 CB) Carbide Rockbuster (CB56KRB) (765 HB)

Weight (lbs)

.8 .85 .8 1.0

.5 .5 .5

continued on next page Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 55

Terminator®, Alligator and Bolt-on Rock & Frost Chain, Teeth & Adapters (2" Pitch, 50,000 Lb.Test Chain) for Ditch Witch® Models V30, R30, 2300, 2200, 2310, R40, J20, 3500, 3610, 3700, R40, 4500, 4010, continued

17

18

19

16

20

21

24

23

22

25

26 27

Ref No.

Part No.

16 17 18 19 20 21 22 23 24 25 26 27 N/S N/S

B 136-036 B 136-037 B 136-038 B 136-039 B 136-041 B 136-040 T 20004L T 20004R T 20005L T 20005R T 20006L T 20006R T 20008L T 20008R

Note:

Smart Pt. No.

Description

Weight (lbs)

Bit Adapter (Less Bit) R.H. Center - Through 4" Bit Adapter (Less Bit) L.H. Center - Through 4" Bit Adapter (Less Bit) L.H. 5" Bit Adapter (Less Bit) R.H. 5" Bit Adapter (Less Bit) L.H. 6" Bit Adapter (Less Bit) R.H. 6" Terminator Adapter, L.H. C-4” Terminator Adapter, R.H. C-4” Terminator Adapter, L.H. 5” Terminator Adapter, R.H. 5” Terminator Adapter, L.H. 6” Terminator Adapter, R.H. 6” Terminator Adapter, L.H. 8” Terminator Adapter, R.H. 8”

2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3

For additional bare chain components, see 2” pitch chain section.

Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 56

Terminator®, Alligator and Bolt-on Rock & Frost 2" Pitch Anti-Back Flex Chain,Teeth & Adapters for Ditch Witch® Models V30, R30, 2300, 2310, R40, 4010, 5010, 3500, 2200, 3610, 3700, 4500

1

2

4

3

13

14

15

6

5

11

Ref No.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

9 7

8

10

12

Part No.

Smart Pt. No.

Description

N/A N/A T 20034 T 20078 765 BLK 765 HDBLK B 105-065 B 105-076 B 105-110 B 105-111 B 135-952 B 135-043 B 135-958 B 135-959 B 135-058

SH20000636 AL200006D36

2” P Welded Terminator Chain, 6” Cut, 36 Stations 2” P Welded Alligator Chain, 6” Cut, 36 Stations Terminator Tooth, 3⁄4”V-Carbide Terminator Tooth, 7/8”V-Carbide Tooth Holder Heavy-Duty Tooth Holder 1⁄2" Locknut (1⁄2" x 3") Bolt (1⁄2" x 41⁄2") Bolt (1⁄2" x 4") Bolt Chain Spacer (Used with Bit Adapter on Outside) Chain Spacer (Used with Bit Adapter on Inside) Carbide Bit Half Cap (B56-C) (765 MB) Carbide Bit Full Cap (B56-B) (765 CB) Carbide Rockbuster (CB56KRB) (765 HB)

Weight (lbs)

.8 .85 .8 1.0

.5 .5 .5

continued on next page Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 57

Terminator®, Alligator and Bolt-on Rock & Frost 2" Pitch Anti-Back Flex Chain,Teeth & Adapters for Ditch Witch® Models V30, R30, 2300, 2310, R40, 4010, 5010, 3500, 2200, 3610, 3700, 4500, continued

16

17

18

21

20

22

24

Note:

Part No. B 136-036 B 136-037 B 136-038 B 136-039 B 136-040 B 136-041 T 20004L T 20004R T 20005L T 20005R T 20006L T 20006R T 20008L T 20008R

23

26

25

Ref No. 16 17 18 19 20 21 22 23 24 25 26 27 N/S N/S

19

27

Description Bit Adapter (Less Bit) R.H. Center - Through 4" Bit Adapter (Less Bit) L.H. Center - Through 4" Bit Adapter (Less Bit) L.H. 5" Bit Adapter (Less Bit) R.H. 5" Bit Adapter (Less Bit) R.H. 6" Bit Adapter (Less Bit) L.H. 6" Terminator Adapter, L.H. C-4” Terminator Adapter, R.H. C-4” Terminator Adapter, L.H. 5” Terminator Adapter, R.H. 5” Terminator Adapter, L.H. 6” Terminator Adapter, R.H. 6” Terminator Adapter, L.H. 8” Terminator Adapter, R.H. 8”

Weight (lbs) 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3

For additional bare chain components, see 2” pitch ABF chain section.

Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 58

Terminator®, Alligator and Bolt-on Rock & Frost Chain,Teeth & Adapters for Ditch Witch® Models R60, R65, R6510, R40, 4010, 5010, 7510, 7610, 8020 Using 3.067"P Chain

1

2

7 3

4

11 5

Ref No.

1 2 3 4 5 6 7 8 9 10 11 12 13

8

10

6

12

13

9

Part No.

Smart Pt. No.

Description

N/A N/A T 20034 T 20078 765 BLK 765 HDBLK B 105-322 B 105-365 B 105-372 B 105-111 B 135-958 B 135-959 B 135-058

SH3067HD0632 AL30670632

3”P, 110,000 Lb. Welded Terminator Chain, 6” Cut, 32 Sta. 3”P, 110,000 Lb. Welded Alligator Chain, 6” Cut, 32 Sta. Terminator Tooth, 3⁄4" V-Carbide Terminator Tooth, 7⁄8" V-Carbide Tooth Holder Heavy Duty Tooth Holder Bolt (3⁄4" x 51⁄2") Bolt (3⁄4" x 4") Locknut (3⁄4") Bolt (3⁄4" x 41⁄2") Carbide Bit Half Cap (B56-C) (765 MB) Carbide Bit Full Cap (B56-B) (765 CB) Carbide Bit Rockbuster (CB56KRB) (765 HB)

Weight (lbs)

.8 .85 .8 1.

continued on next page

Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 59

Terminator®, Alligator and Bolt-on Rock & Frost Chain,Teeth & Adapters for Ditch Witch® Models R60, R65, R6510, R40, 4010, 5010, 7510, 7610, 8020 Using 3.067"P Chain, continued

15

14

16

17

20

18

21

19

22

Ref No.

14 15 16 17 18 19 20 21 22 23 24 N/S N/S

Note:

23

24

Part No.

Description

B 135-973 B 135-974 B 135-975 B 135-976 T 306706L T 306706R T 306708L T 306708R B 105-373 B 135-977 B 135-978 B 135-979 B 135-980

Bit Adapter (Less Teeth) L.H. 8" Cut Bit Adapter (Less Teeth) R.H. 8" Cut Bit Adapter (Less Teeth) R.H. cc - 6" Bit Adapter (Less Teeth) L.H. cc - 6" Terminator Adapter, L.H. 6” Terminator Adapter, R.H. 6” Terminator Adapter, L.H. 8” Terminator Adapter, R.H. 8” Bolt ( 3⁄4" x 5") Chain Spacer, Outside (110,000 Lb.) Chain Spacer, Inside (110,000 Lb.) Chain Spacer, Outside (70,000 Lb.) Chain Spacer, Inside (70,000 Lb.)

Weight (lbs)

For additional bare chain components, see pages 42 and 43.

Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 60

Terminator®, Alligator and Bolt-on Rock & Frost 3.067" Pitch Anti-Back Flex Chain,Teeth & Adapters for Ditch Witch® Models R60, R65, R6510, R40, 4010, 5010, 7510, 7610, 8020 & Attachments A/H500, A/H700 8

7

10

1

9 3

2

11 6

13

12

18

5

4

19

15

14 23

20

22 16

Ref No.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

Note:

21

17

Part No.

Smart Pt. No.

N/A N/A T 20034 T 20078 765 BLK 765 HDBLK B 105-322 B 105-365 B 105-372 B 105-373 B 135-958 B 135-959 B 135-058 B 135-973 B 135-974 B 135-975 B 135-976 T 306706L T 306706R T 306708L T 306708R B 135-977 B 135-978

SH3067ABF06D32 ABF, 110,000# Welded Terminator, 6” Cut, 32 Stations AL3067ABF06D32 ABF, 110,000# Welded Alligator, 6” Cut, 32 Stations Terminator Tooth, 3⁄4" V-Carbide Terminator Tooth, 7⁄8" V-Carbide Tooth Holder Heavy Duty Tooth Holder Bolt (3⁄4" x 51⁄2") Used with Two Outside Bit Adapters Bolt (3⁄4" x 4") Used with Inside Bit Adapter Locknut (3⁄4") Bolt (3⁄4" x 5") Used with Outside Bit Adapter Carbide Bit Half Cap (B56-C) (765 MB) Carbide Bit Full Cap (B56-B) (765 CB) Carbide Rockbuster (CB56KRB) (765 HB) Bit Adapter L.H. 8" Bit Adapter R.H. 8" Bit Adapter R.H. Center through 6" Cut Bit Adapter L.H. Center through 6" Cut Terminator Adapter, L.H. 6” Terminator Adapter, R.H. 6” Terminator Adapter, L.H. 8” Terminator Adapter, R.H. 8” Chain Spacer (Used with Bit Adapter on Outside) Chain Spacer (Used with Bit Adapter on Inside)

Description

Weight (lbs)

.8 .85 .8 1.

For additional bare chain components, see page 44.

Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 61

H-Plate,Terminator®, and Bolt-on Rock & Frost Chain,Teeth and Adapters for TA3110 Ultra Heavy-Duty Chain (165,000# Test Chain) Replaces all 3"P Chains 3

5

6

1 4

7 9

2

8

11

10

14 16

17

15

18 12

13

Ref No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

Note:

Part No. N/A N/A B 43 LH B 43 LC B 43 LRB 765 CRFN B 43 CW TA 4134 LPL TA 4134 LPR H 75-6L H 75-6R H 75-8L H 75-8R T 20034 T 20078 T 306706L T 306706R T 306708L T 306708R

Smart Pt. No.

Description

TA311006H32 SH31100632

Welded H-Plate Chain, 6” Cut, 32 Stations Welded Terminator Chain, 6” Cut, 32 Stations Carbide Tooth with clip (735MRW) Lock Clip Only (K91) Rockbuster Bit with clip Full Cap Carbide Bit with clip Clip Wrench Cutter, L.H., Low-profile Cutter, R.H., Low-profile Carbide Holder, L.H. 6” Carbide Holder, R.H. 6” Carbide Holder, L.H. 8” Carbide Holder, R.H. 8” Terminator Tooth, 3⁄4" V-Carbide Terminator Tooth, 7⁄8" V-Carbide Terminator Adapter, L.H. 6” Terminator Adapter, R.H. 6” Terminator Adapter, L.H. 8” Terminator Adapter, R.H. 8”

19

Weight (lbs)

.8 .85

For additional bare chain components, see page 49. continued on next page

Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 62

H-Plate,Terminator®, and Bolt-on Rock & Frost Chain,Teeth and Adapters for TA3110 Ultra Heavy-Duty Chain (165,000# Test Chain) Replaces all 3"P Chains, continued

21

20

32

22 31 30 29

24

23

25

27

26

33

34

Ref No. 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37

Part No. TP 17 SP 1916 SP 178 SP 200 SP 238 SP 218 34 FW 34 LW 34 LN 34412-8 34500-8 34512-8 34600-8 PL 75-10 PL 75-12 PL 75-14 PL 75-16 BL 3110-10

37

28

35

Description Heat Treated Tooth Pocket 19⁄16" Alloy Tube Spacer 17⁄8" Alloy Tube Spacer 2” Alloy Tube Spacer 23⁄8" Alloy Tube Spacer 21⁄8" Alloy Tube Spacer 3⁄4" Flat Washer 3⁄4" Lock Washer 3⁄4" Lock Nut 3⁄4" x 41⁄2" Gr. 8 Bolt 3⁄4" x 5” Gr. 8 Bolt 3⁄4" x 51⁄2" Gr. 8 Bolt 3⁄4" x 6” Gr. 8 Bolt 10” Carbide Expander 12” Carbide Expander 14” Carbide Expander 16” Carbide Expander Block Spacer - Space for 2” Additional Cut

36

Weight (lbs)

Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 63

Alligator and Bolt-on Rock & Frost Chain,Teeth & Adapters (41⁄2" Pitch 150,000# Test Chain) for Ditch Witch® Models R100, AR12, R150

1

2

5 8 6

9

4

3

10

12

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

11

13

Ref No.

7

17

16

15

14

Part No.

Smart Pt. No.

Description

N/A B 135-812 B 105-372 B 105-499 B 135-801 B 135-802 B 135-805 R 100CL B 136-100 B 136-101 B 136-102 B 136-060 B 136-061 B 136-062 B 136-063 765 BLK 765 HDBLK

AL450008D24 B450000B24

Welded Alligator Chain, 8” Cut, 24 Stations 18'0" Chain, Bare Locknut (3⁄4" N.C.) Bolt (3⁄4" x 13⁄4") Chain Pin Key Roller Link Conn. Link Carbide Bit (Full Cap) (765 CB) Carbide Bit (Half Cap) (765 MB) Carbide Bit (Rock Buster) (765 HB) Bit Adapter (Position 1) Bit Adapter (Position 2) Bit Adapter (Position 3) Bit Adapter (Position 4) Tooth Holder Heavy Duty Tooth Holder

Weight (lbs)

360

.8 1.0

Note: MTO adapters can be manufactured upon request. Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 64

H-Plate,Terminator® and Bolt-on Rock & Frost Chain,Teeth and Adapters for Ditch Witch® Models R100, AR12, R150 using TA4086 Chain (225,000# Test) replaces 4.5" 150,000 Chains

1

2

11

10 9

3

4

5

Smart Pt. No. TA408608H26 TA408600B26

6

8

7

Ref No. 1 2 3 4 5 6 7 8 9 10 11 N/S N/S N/S N/S N/S

Part No. N/A N/A B 43 LH B 43 LRB 765 CRFN B 43 LC B 43 CW TP 17 PL 75-12 PL 75-14 PL 75-16 PL 75-18 H 300-10L H 300-10R H 300-12L H 300-12R

Description 4.086”P Welded H-Plate Chain, 8” Cut, 26 Stations 4.086”P Chain, Bare, 26 Stations Carbide Tooth with clip (735 MRW) Carbide Tooth with clip (735 HR) Carbide Tooth with clip (Full Cap) Lock Clip Only (K91) Clip Wrench Heat Treated Tooth Pocket 12" Carbide Expander Plate 14" Carbide Expander Plate 16" Carbide Expander Plate 18” Carbide Expander Plate Carbide Holder 10" Cut, L.H. Carbide Holder 10" Cut, R.H. Carbide Holder 12" Cut, L.H. Carbide Holder 12" Cut, R.H.

Note:

For additional bare chain components, see pages 54 & 55.

Weight (lbs)

continued on next page Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 65

H-Plate,Terminator® and Bolt-on Rock & Frost Chain,Teeth and Adapters for Ditch Witch® Models R100, AR12, R150 using TA4086 Chain (225,000# Test) replaces 4.5" 150,000 Chains, continued

13

15 14

12

16

17

21

19

18

20

23

22

25

Ref No. 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

Part No. H 75-6L H 75-6R H 75-8L H 75-8R SP 2716 SP 238 SP 11516 SP 2116 BL 4086-10 T 306706L T 306706R T 306708L T 306708R T 20034 T 20078

24

26

Description

Weight (lbs)

Carbide Holder, L.H. 6” Carbide Holder, R.H. 6” Carbide Holder, L.H. 8” Carbide Holder, R.H. 8” 27⁄16” Alloy Tube Spacer 23⁄8” Alloy Tube Spacer 115⁄16” Alloy Tube Spacer 21⁄16” Alloy Tube Spacer Block Spacer – Spacer for 2" Additional Cut Terminator Adapter, L.H. 6” Terminator Adapter, R.H. 6” Terminator Adapter, L.H. 8” Terminator Adapter, R.H. 8” Terminator Tooth, 3⁄4" V-Carbide Terminator Tooth, 7⁄8" V-Carbide

.8 .85

continued on next page Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 66

H-Plate,Terminator® and Bolt-on Rock & Frost Chain,Teeth and Adapters for Ditch Witch® Models R100, AR12, R150 using TA4086 Chain (225,000# Test) replaces 4.5" 150,000 Chains, continued

28

27

29

31

30

35 34

33 32

37

36

Ref No. 27 28 29 30 31 32 33 34 35 N/S 36 37 38 N/S N/S

Part No. B 83 LH B 83 LC 34 FW 34 LW 34 LN 34412-8 34500-8 34512-8 34600-8 34 TABS PL 300-16 PL 300-18 PL 300-20 PL 300-22 PL 300-24

Description Carbide Tooth with clip Lock Clip 3⁄4” Flat Washer 3⁄4” Lock Washer 3⁄4” Lock Nut 3⁄4” x 41/2” Gr. 8 Bolt 3⁄4” x 5” Gr. 8 Bolt 3⁄4” x 51/2” Gr. 8 Bolt 3⁄4” x 6” Gr. 8 Bolt 3⁄4” Bolt Seat for TA300 Holder 16” Carbide Expander Plate 18” Carbide Expander Plate 20” Carbide Expander Plate 22” Carbide Expander Plate 24” Carbide Expander Plate

38

Weight (lbs)

Ballantine, Inc. • Ditch Witch® Replacement Par ts • Page 67

Roller Chain Section

To Order Roller Chain P = One Pitch

1. Measure Length of Pitch 2. Count the number of pitches or rollers

P

3. From one pin to the next pin equals one pitch Part No.

Description

40R Cut 40CL 400L 50R Cut 50CL 500L 60R Cut 60CL 600L 60HR Cut 60HCL 60HOL 60-2R Cut 60-2CL 60-2OL 80HR Cut 80HCL 80HOL 100HR Cut 100HCL 100HOL 120R Cut 120CL 160R Cut 160CL

#40 Roller Chain, Pitch Length 1⁄2" #40 Conn. Link #40 Offset Link #50 Roller Chain, Pitch Length 5⁄8" #50 Conn. Link #50 Offset Link #60 Roller Chain, Pitch Length 3⁄4" #60 Conn. Link #60 Offset Link #60 Heavy Roller Chain, Pitch Length 3⁄4" #60 Heavy Conn. Link #60 Heavy Offset Link #60 Double Roller Chain, Pitch Length 3⁄4" #60 Double Conn. Link #60 Double Offset Link #80 Heavy Roller Chain, Pitch Length 1" #80 Heavy Conn. Link #80 Heavy Offset Link #100 Heavy Roller Chain, Pitch Length 11⁄4" #100 Heavy Conn. Link #100 Heavy Offset Link #120 Roller Chain, Pitch Length 11⁄2" #120 Conn. Link #160 Roller Chain, Pitch Length 2" #160 Conn. Link

We stock nearly every size of Roller Chain. Ballantine, Inc. • Ditch Witch

®

Replacement Par ts • Page 68

Notes

Notes _____________________________________________________________________________________________ _____________________________________________________________________________________________ _____________________________________________________________________________________________ _____________________________________________________________________________________________ _____________________________________________________________________________________________ _____________________________________________________________________________________________ _____________________________________________________________________________________________ _____________________________________________________________________________________________ _____________________________________________________________________________________________ _____________________________________________________________________________________________ _____________________________________________________________________________________________ _____________________________________________________________________________________________ _____________________________________________________________________________________________ _____________________________________________________________________________________________ _____________________________________________________________________________________________ _____________________________________________________________________________________________ _____________________________________________________________________________________________ _____________________________________________________________________________________________ _____________________________________________________________________________________________ _____________________________________________________________________________________________ _____________________________________________________________________________________________ _____________________________________________________________________________________________ _____________________________________________________________________________________________ _____________________________________________________________________________________________ _____________________________________________________________________________________________ _____________________________________________________________________________________________ _____________________________________________________________________________________________ _____________________________________________________________________________________________ _____________________________________________________________________________________________ Ballantine, Inc. • Ditch Witch

®

Replacement Par ts

Warning ! ▲

Use Care To Prevent Injury Comply with the Following to Avoid Serious Personal Injury

1.

Guards must be provided on all chain and sprocket installations in accordance with provisions of ANSI/ASME B15.1 - 1996 “Safety Standards for Mechanical Power Transmission Apparatus,” and ANSI/ASME B20.1 1996 “Safety Standards for Conveyors and Related Equipment,” or other applicable safety standards. When revisions of these standards are published, the updated edition shall apply.

2.

Always lock out power switch before installing, removing, lubricating or servicing a chain system.

3.

When connecting or disconnecting chain: a. Eye protection is required. Wear safety glasses, protective clothing, gloves, and safety shoes. b.

Support the chain to prevent uncontrolled movement of chain and parts.

c.

Use of pressing equipment is recommended. Tools must be in good condition and properly used.

d.

Determine correct direction for pin/rivet removal or insertion.

Warning ! ▲

Use Care To Prevent Injury Comply with the Following to Avoid Serious Personal Injury

1.

Guards must be provided on all chain and sprocket installations in accordance with provisions of ANSI/ASME B15.1 - 1996 “Safety Standards for Mechanical Power Transmission Apparatus,” and ANSI/ASME B20.1 1996 “Safety Standards for Conveyors and Related Equipment,” or other applicable safety standards. When revisions of these standards are published, the updated edition shall apply.

2.

Always lock out power switch before installing, removing, lubricating or servicing a chain system.

3.

When connecting or disconnecting chain: a. Eye protection is required. Wear safety glasses, protective clothing, gloves, and safety shoes. b.

Support the chain to prevent uncontrolled movement of chain and parts.

c.

Use of pressing equipment is recommended. Tools must be in good condition and properly used.

d.

Determine correct direction for pin/rivet removal or insertion.

Part No.T01101

©Ballantine, Inc. 2008 All Rights Reserved

Suggest Documents