Quick Start Guide met(AL)™ Vault Dock
USB 3.0 Docking Station with Built-In HDD Enclosure GUD310
PART NO. Q1345
www.iogear.com
Package Contents
1
1 x GUD310 Docking Station 1 x USB 3.0 Type A to Type B Cable 1 x DVI to VGA Adapter 1 x DC 12V Power Adapter 1 x Software CD 4 x HDD Mounting Screws 1 x Screw Driver 1 x Quick Start Guide 1 x Warranty Card
System Requirements Operating System • Windows® 7, Windows® 8, Windows® 8.1 • Mac OS X 10.6+ System Memory • Minimum: 2GB RAM • Recommended: 4GB RAM or more when doing video playback System Hardware • USB 3.0 port • Intel Core 2 Duo 2.0 GHz or better (Intel Core i5 Quad Core 2.4GHz or better recommended for video playback) • Microsoft DirectX 10 (Windows® 8.1) / DirectX 9 (Windows® 7 or Windows® 8) or later graphics device with WDDM driver • 30MB of free disk space
2
Overview Front/Side 1. Headphone 2. Microphone 3. Power Indicator 4. USB 3.0 Ports 5. USB Fast Charging Ports 6. HDD Indicator 7. 2.5” HDD Tray 8. Power Switch
1 2 3 4 USB 3.0
5 USB
8 6
HDD
7
1
LAN
Back 1. Gigabit LAN Port 2. DVI Port 3. HDMI Port 4. USB 2.0 Ports 5. DC-In Port 6. USB 3.0 Upstream Port 7. USB 3.0 Ports
DVI
2
USB 2.0
HDMI
3
USB 2.0
4
O N
O
I
USB 3.0 USB 3.0 O
USB 3.0
F
F
IN
DC 12V
5 6
7
3
Software Installation
Before connecting the Docking Station, install drivers using the provided CD. If your PC/Notebook/Mac does not have a CD drive, go to the link below to download the latest drivers: www.displaylink.com/support/downloads.php 1. Select Drivers for either Windows or Mac and then double-click the Setup.exe or DisplayLink.dmg 2. Follow the on-screen instructions until the installation is complete. Restart the computer when prompted.
Hardware Installation Assembling the SATA 2.5” HDD Enclosure 1. Check that the Power Switch is at the OFF position.
ON
_ O
x
x
x
2. At the bottom of the Docking Base, use a screwdriver to remove the screws from the rear panel of the front drive tray.
USB 3.0
USB
3. Slide the drive tray out of the enclosure housing.
HDD
OFF
4 4. Insert the 2.5” SATA HDD into the drive tray. Ensure that the screw guides on the left and right side of the HDD are aligned on the drive tray. Fasten the HDD to the drive tray by inserting and tightening the screws. 5. Gently slide the drive tray with HDD back into the housing.
USB 3.0
USB
6. Install the rear panel screws back on. Assembly is now complete. HDD
Connecting the Docking Station to a Computer 1. Check that the Power Switch is at the OFF position.
_ O
ON
OFF
2. Insert the main unit to the Docking Base. USB 3.0
LAN
USB
DVI
HDD
USB 2.0
USB 2.0
HDMI
3. Using the included USB 3.0 Type A to Type B cable, connect the Type B end into the docking station’s USB 3.0 Upstream Port. Connect the Type A end to your computer or laptop. O N
O
I
USB 3.0 USB 3.0 O FF
USB 3.0 DC 12V
IN
DVI
LAN
5
USB 2.0
USB 2.0
HDMI
4. Connect the docking station to a power source using the included power adapter.
O N
O
I
USB 3.0 USB 3.0 O F
USB 3.0
F
IN
DC 12V
5. Connect video cables, audio cables, USB devices or USB charging cables to the docking station. 6. Turn the power switch to ON position.
External Monitor Settings: Windows Option 1: Extend Mode 1. Click the DisplayLink icon in the bottom right corner to open the DisplayLink Manager Menu. 2. Roll the mouse cursor over IOGEAR USB 3.0 Dock to bring up the Manager Menu. 3. Select Extend.
6 4. The monitor is now extended in the direction it was the last time the display was in this mode. For more control, select Extend To and choose one of the options. This puts the device into Extend Mode, and places it to the Left/Right/Above/Below the main monitor.
Option 2: Mirror Mode 1. Click the DisplayLink icon in the bottom right corner to open the DisplayLink Manager Menu. 2. Roll the mouse cursor over IOGEAR USB 3.0 Dock to bring up the Manager Menu. 3. Select Mirror. 4. The resolution, color depth, and refresh rate of the primary screen are copied on to the monitor connected to the docking station.
External Monitor Settings: Mac OS X Option 1: Extend Mode 1. Open System Preferences and click Displays.
2. Click on Arrangement to change the position of the displays currently connected.
Option 2: Mirror Mode 1. Open System Preferences and click Displays.
2. Click on Arrangement. 3. Click the box marked Mirror Displays.
7
Compliance Information FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential setting. This product generates, uses, and can radiate radio frequency energy and, if not installed and used as directed, it may cause harmful interference to radio communications. CE Compliance This device has been tested and found to comply with the following European Union directives: Electromagnetic Capability (2004/108/EC), Low Voltage (2006/95/EC) and R&TTED (1999/5/EC). IC Statement Canada, Industry Canada (IC) Notices Complies with the Canadian ICES-003 Class B specifications. Declaration of Conformity and related documents can be downloaded directly from our website: http://www.iogear.com/product/GUD310/certifications
Limited Warranty Warranty Information This product carries a 3 Year Limited Warranty. For the terms and conditions of this warranty, please go to http://www.iogear.com/support/warranty Register online at http://www.iogear.com/register Important Product Information Product Model Serial Number
Contact WE’RE HERE TO HELP YOU! NEED ASSISTANCE SETTING UP THIS PRODUCT? Make sure you: 1. Visit www.iogear.com for more product information 2. Visit www.iogear.com/support for live help and product support iogear.custhelp.com
[email protected] www.iogear.com 19641 Da Vinci, Foothill Ranch, CA 92610
