Item Number (upto 200 characters) Item Description

90 90.1 90.2 90.3

COLD / HOT /DRINKING WATER SUPPLY: INTERNAL/EXTERNAL WATER SUPPLY WORK:Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) SDR-13.5 pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threated fittings including fixing the pipe with clamps at C/C 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cemetnt and testing(Minimum 6 bar pressure required) of joints complete as per direction of engineeer in charge. (SUPREME /AASHIRWAD/ ASTRAL/EQUIVALENT) (Internal pipe work : inside Toilet & OHT to Toilets) a) 20 mm b) 25 mm c) 32 mm d) 40 mm (SOR 2013-14 Item No - 0.0)

Supplying & erecting resin bonded flap rock wool / glass wool with conductivity valve 1.67 sq.mm per watt & to with stand the temp. to 100 degree centigrade C thickness 50mm with G I pipe of following size dia "B" class as per IS:1239. The plastic sheet to be used as covering of glass wool. Al. cladiy besides other materials like chicken mesh, 26 G Al. Sheet shall be used for cladding the insulation pipe. 91 [A] 20 mm NB pipe 91.1 [B] 25 mm NB pipe 91.2 [C] 32 mm NB pipe

Quantity (only figures)

Amount Tender ( Upto 2 UNIT Rate Decimal (upto 50 ( Upto 2 s ) charact Decimal ers) s)

Rmt Rmt Rmt Rmt

0 0 0 0

0 0 0 0

210 Rmt 160 Rmt 100 Rmt

0 0 0

0 0 0

560 590 340 180

Providing and layingin tranches galvanized mild steel tubes (Medium grade) of the following nominal bore, tube fitting (Earthwork in trenches to be measured and separately ) 92 [A]40 mm 92.1 [B]65 mm

93 93.1 94 94.1

95 96

97

98

99

Providing and Laying & Jointing SWR PVC Pipe ISI marked brand as per IS:14735 complete with PVC Fittings & clamps & hinges including cutting and making good the walls & ceiling for waste pipes, connections & as directed by the Engineer-inCharge.(all downtakes and internal pipe work) a) 75 mm Dia a) 100 mm Dia (R.A.) Providing & fixing in position cowl vent to pipes a) 75 mm dia 100 mm dia Providing and fixing cast iron Nahani trap of the following Nominal Diameter of self cleaning design with CI screened down or hinge grating including cost of cutting and making good the wall and floor 100 mm inlet and 50 mm outlet. Providing and fixing 100 mm sand cast iron grating for gully, floor or Nahani trap. Providing and fixing wash down water closet( Indian type W.C. pan)size 580 mm (earthwork, bed concrte,foot rests and trap to be measured and trap to be measured and paid for seperately) (A) Vitreous China (I) Long pattern white Providing and fixing wash down water closet (European type, WC pan) with integral S trap including jointing the trap with soil pipe in cement mortar 1:1 (1 Cement : 1 fine sand) ( Seal and cover to be measured and paid for separately) A) vitrious china white colour Providing and fixing 100 mm size P or S trap for WC Squatting pan including jointing the trap with the pan and soil pipe with cement mortar 1:1 ( 1 Cement : 1 fine sand) A) Vitreous China, white colour

620 Rmt 230 Rmt

0 0

0 0

1100 Rmt 410 Rmt

0 0

0 0

2 Each 2 Each

0 0

0 0

229 Each

0

0

229 Each

0

0

47 Each

0

0

90 Each

0

0

47 Each

0

0

100

101

102

103

104 105 106 107 108 109

Providing and fixing 12.5 liters Low level flushing cistern with a pair of CI or MS bracket complete with fittings such as lead valve less syphon, 15 mm nominal size brass valve with polythene float, CP brass handle unions and coupling for connections, with inlet outlet and overflow pipes, 40 mm dia porcelain enamelled flush bend including cutting holes in walls and making good the same connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) Providing and fixing plastic seat and cover for wash down water closet with C.P. brass hinges and rubber buffers A) Black plastic seat and cover Providing and fixing C.P Health Faucet with 1 meter flexible pipe and wall hook approved make. The fixing include drilling & installation of wooden plug with C.P. brass screw with making the wall good with finishes as per instruction of Engg. In charge etc. complete. Providing and fixing wash basin with single hole for pillar trap with CI or MS brackets painted white including cutting holes and making good the same but excluding fitting a) Vitreous china flat back wash basin 550mm X 400mm size in white colour Providing & Fixing Kitchen Sink with C.I. or M.S. brackets painted white including cutting holes in walls making good the same but excluding fittings ( a) Steel of 600mm X 450mm X 150mm size Providing and fixing Angle Cock with screw, back nuts all necessary fittings etc. Completed Providing and fixing 32 mm dia C.P. brass waste for wash basin or sink. Providing and fixing rubber plug for sink or wash basin. Providing and fixing Chromium plated bottle trap with necessary coupling of approved quality for wash basin. Providing and fixing M.I. fisher union for wash basin or sink. (A) 32 mm dia.

137 Each

0

0

90 Each

0

0

90 Each

0

0

56 Each

0

0

7 Each

0

0

56 Each

0

0

63 Each 63 Each

0 0

0 0

56 Each

0

0

63 Each

0

0

Providing and fixing 600mmX450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden plug with C.P. brass screws and 110 washers. Providing and fixing CP brass towel rail complete with C.P. brass brackets fix to wooden plug with CP brass screws. I) 600 111 mm X 20 mm Providing and fixing toilet paper holder (M.R.) 112 (A) C.P. Brass Providing and fixing of screwed down bib taps of following size 113 (A) Brass chromium plated screw down bib tap of 20mm

56 Each

0

0

82 Each

0

0

90 Each

0

0

355 Each

0

0

Providing and fixing pillar tap capstan head screw down high pressure with screw and back nuts of (I)15mm Dia. (M.R.) 114 (Cera-CP 101 / Parryware-G0103A1 / Hindware) Providing and Fixing Urinal of approved quality including connecting the Urinal with waste pipe, tap etc. completed. [A] White earthenware flat back or corner type size 430mmX 115 260mm X 350mm

56 Each

0

0

181 Each

0

0

Providing and fixing concealed Stop cock for Urinal consisting of fitting sleeve, operating lever and adjustable wall flange of 116 approved quality and of 1/2" size as directed below.

181 Each

0

0

Providing and fixing ball cock of approved quality as directed 117 [A]Copper Metal. (II)50 mm dia

28 Each

0

0

0 0

0 0

Providing and laying (to level or slopes) and jointing with stiff mixture of Cement Mortar in proportion 1:1, Salt glazed stoneware pipes including testing of pipes and joints complete. 118 [i] 100 mm Dia. 118.1 [ii] 150 mmDia.

275 Rmt 1000 Rmt

Providing and laying Cement concrete 1:5:10 (1-Cement : 5 fine sand : 10-Graded stone aggregate 40mm nominal size) bedding for stoneware pipes of following internal diameters with necessary formwork and curing complete. 119 [A] 100mm dia. (112 mm Ave. bed thickness) 119.1 [B] 150mm dia. (166mm Ave. bed thickness) Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I. cover with frame of 300mmX300mm size (inside) with standard weight. I) Square 120 mouth traps. a) 100mmX100mm size P type

121

122 122.1

123

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1cement : 2-coarse send : 4-graded stone aggregate 20mm nominal size) foundation concrete 1:3:6 mix (1-cement : 3coarse sand : 6- Brick bats 40 + 50mm size) inside plastering 15mm thick with Cement a) With 230mm thick walls of brick masonary using brick having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement : 5Coarse sand) (I) Inside size 900mm X 1200mm and 1.5M. deep including C.I. cover with frame size 560mm diameter total weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 kg. and Wt. of frame 64 Kg.) 1) A type depth 0.90 Meter for 150 mm diameter sewer. Providing & Laying ( to level or Slope) and jointing reinforced concrete Light Duty NoN Pressure I.S. Class NP2 of the following internal diameter with collars and butt ends prepared for collar joints including testing of joints for [B]250 mm dia [C]300 mm dia Providing soak pit of 5.0 Cu.M. Volume including excavating and filling brickbats with dry masonry work at top for 45cm. Height including providing vatas in C.M. 1:3 with finishing, curing etc. complete

0 0

0 0

120 Each

0

0

137 Each

0

0

0 0

0 0

0

0

275 Rmt 1000 Rmt

16700 Rmt 235 Rmt

7 Each

Providing soak pit of 17 Cu.M. Volume including excavating and filling brickbats with dry masonry work at top for 45cm. Height including covering the top with stone including providing vatas 124 in C.M. 1:3 with finishing, curing etc. complete as directed Constructing Septic Tank of 17 Cu M with R.C.C. top slab in 1:2:4 mix (1-cement : 2-coarse send : 4-graded stone aggregate 20mm nominal size) foundation concrete 1:3:6 mix (1-cement : 3-coarse sand : 6- Brick bats 40 + 50mm size) inside plastering 15mm thick with Cement a) With 230mm thick walls of brick masonary using brick having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement : 5Coarse sand) including C.I. cover with frame size 560mm diameter total weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 kg. and Wt. of frame 64 Kg.), including all 125 necessary connection& accessories Providing and installation of percolation well of 30 mtr depth from ground level having 200mm dia hole, including minimum 15Cu.mt gravel, compressior of 900/200 for 4 hours, including 8" dia TATA casing pipe of 5mm thick with clamp, including required quantity of strainer pipe, and necesory accesaries,including constructing water tight brick masonary, RCC slab and pebbles on top of it (minimum 1mtr height), including necessory other material and labour as directed by 126 Engineer In Charge. For 5 HP 3 phase open well horizontal mono block pump set suitable for 1350 LPM to 310 LPM @ 10 to 42 Mtr head suitable for 50/65 mm dia delivery pipe. CAT-II (1W +1S) with necessary 127 valve fittings.

2 Each

0

0

2 Each

0

0

9 Each

0

0

22 Each

0

0