QUALSURE CONSULTANTS PO Box 80 Rosedale Vic. 3847 Australia Phone +61 3 51992399 Fax +61 3 5199 2544 7 December 2010 Mr Frank Hardy Prosoft Technology Dear Mr. Hardy LETTER OF AUTHORISATION
This letter authorises Prosoft Technology, to label the product(s) listed below, with the C-Tick compliance mark as shown above and supplier number N136, subject to the following conditions: a. The units supplied are identical to those held by and described in the compliance folder held by Qualsure Consultants. b. Qualsure Consultants assumes no responsibility in the retail supply, servicing or repair of the listed product. c. Any modification to the listed product(s) voids this authorisation. d. This authorisation pertains only to the product(s) listed. e. Any AC adapter used with the product holds and maintains an Australian electrical safety certificate. f. Prosoft Technology takes responsibility and agrees to meet all costs in any action relating from a breach of the conditions of this authorisation. g. Prosoft Technology agrees to supply to Qualsure Consultants the names and addresses of all Australian importers if required by the relevant Australian authority. h. Qualsure Consultants agrees to provide at no cost an agents’ letter directly to the importers of this product when requested to do so.
Product
Trade Name
Model Number
Industrial hotspot
ProSoft
Please see appendix 1
The labelling and supply of the product with a C-Tick compliance label including the identifier N136 is agreement with the above conditions.
Gordon Slimmon. Director
Quality Systems
International Permits Compliance Folders
A division of Blulen Pty Ltd (ACN 090692354) Registered Office 18 Hood Street Rosedale Vic. 3847
CF3410-1
QUALSURE CONSULTANTS PO Box 80 Rosedale Vic. 3847 Australia Phone +61 3 51992399 Fax +61 3 5199 2544
Appendix 1 ProSoft RLXIB-IHN RadioLinx 802.11n Industrial Hotspot RLXIB-ICN RLXIB-IH2N RLXIB-IH2N-W
Quality Systems
International Permits Compliance Folders
A division of Blulen Pty Ltd (ACN 090692354) Registered Office 18 Hood Street Rosedale Vic. 3847
CF3410-1
Supplier’s declaration of conformity For compliance levels 1, 2 and 3 in Australia As required by the following Notices: Radiocommunications Devices (Compliance Labelling) Notice 2003 made under section 182 of the Australian Radiocommunications Act 1992; Radiocommunications Labelling (Electromagnetic Compatibility) Notice 2008 made under section 182 of the Australian Radiocommunications Act 1992; Radiocommunications (Compliance Labelling – Electromagnetic Radiation) Notice 2003 made under section 182 of the Australian Radiocommunications Act 1992; and Telecommunications Labelling (Customer Equipment and Customer Cabling) Notice 2001 made under section 407 of the Australian Telecommunications Act 1997
Instructions for completion This completed form remains with the supplier as part of the documentation required for the compliance records. Do not return this form to the ACMA.
Supplier’s details
Qualsure Consultants
ACMA supplier code number
N136
(AGENT) of
18 Hood Street Rosedale Vic. Product details Product description – brand name, type, model, lot, batch or serial number (if available) Brand Name Model Number Description
ProSoft ProSoft RLXIB-IHN RadioLinx 802.11n Industrial Hotspot Industrial Hotspot
Compliance The above mentioned product complies with the requirements of the relevant ACMA Standards made under the Radiocommunications Act 1992 and the Telecommunications Act 1997. These Standards are referenced in notices made under section 182 of the Radiocommunications Act and 407 of the Telecommunications Act. Evidence of compliance is demonstrated by test reports to the following applicable standards.
Applicable standards Standard title, number and, if applicable, number of the test report
Standard ACA Radiocommunications (Short Range Devices) AS/NZS 4268 Radiocommunications (Electromagnetic Radiation-Human Exposure) Standard
Date of Issue 2004 2008 March 2003
Declaration I hereby declare that the contents of this form are true and correct, that the product mentioned above complies with the relevant above mentioned standards and all products supplied under this declaration will be identical to the product identified above. Note: Under section 137.1 of the Criminal Code Act 1995, it is an offence to knowingly provide false or misleading information to a Commonwealth entity. Penalty: 12 months imprisonment
Gordon Slimmon Director 7 Dec 2010 QUALSURE CONSULTANTS A division of Blulen Pty Ltd (ACN 090 692 354) Registered Office 18 Hood Street Rosedale Vic. 3847 CF3410/1-1
Supplier’s declaration of conformity For compliance levels 1, 2 and 3 in Australia As required by the following Notices: Radiocommunications Devices (Compliance Labelling) Notice 2003 made under section 182 of the Australian Radiocommunications Act 1992; Radiocommunications Labelling (Electromagnetic Compatibility) Notice 2008 made under section 182 of the Australian Radiocommunications Act 1992; Radiocommunications (Compliance Labelling – Electromagnetic Radiation) Notice 2003 made under section 182 of the Australian Radiocommunications Act 1992; and Telecommunications Labelling (Customer Equipment and Customer Cabling) Notice 2001 made under section 407 of the Australian Telecommunications Act 1997
Instructions for completion This completed form remains with the supplier as part of the documentation required for the compliance records. Do not return this form to the ACMA.
Supplier’s details
Qualsure Consultants
ACMA supplier code number
N136
(AGENT) of
18 Hood Street Rosedale Vic. Product details Product description – brand name, type, model, lot, batch or serial number (if available) Brand Name Model Number Description
ProSoft RLXIB-ICN Industrial Hotspot
Compliance The above mentioned product complies with the requirements of the relevant ACMA Standards made under the Radiocommunications Act 1992 and the Telecommunications Act 1997. These Standards are referenced in notices made under section 182 of the Radiocommunications Act and 407 of the Telecommunications Act. Evidence of compliance is demonstrated by test reports to the following applicable standards.
Applicable standards Standard title, number and, if applicable, number of the test report
Standard ACA Radiocommunications (Short Range Devices) AS/NZS 4268 Radiocommunications (Electromagnetic Radiation-Human Exposure) Standard
Date of Issue 2004 2008 March 2003
Declaration I hereby declare that the contents of this form are true and correct, that the product mentioned above complies with the relevant above mentioned standards and all products supplied under this declaration will be identical to the product identified above. Note: Under section 137.1 of the Criminal Code Act 1995, it is an offence to knowingly provide false or misleading information to a Commonwealth entity. Penalty: 12 months imprisonment
Gordon Slimmon Director 7 Dec 2010 QUALSURE CONSULTANTS A division of Blulen Pty Ltd (ACN 090 692 354) Registered Office 18 Hood Street Rosedale Vic. 3847 CF3410/2-1
Supplier’s declaration of conformity For compliance levels 1, 2 and 3 in Australia As required by the following Notices: Radiocommunications Devices (Compliance Labelling) Notice 2003 made under section 182 of the Australian Radiocommunications Act 1992; Radiocommunications Labelling (Electromagnetic Compatibility) Notice 2008 made under section 182 of the Australian Radiocommunications Act 1992; Radiocommunications (Compliance Labelling – Electromagnetic Radiation) Notice 2003 made under section 182 of the Australian Radiocommunications Act 1992; and Telecommunications Labelling (Customer Equipment and Customer Cabling) Notice 2001 made under section 407 of the Australian Telecommunications Act 1997
Instructions for completion This completed form remains with the supplier as part of the documentation required for the compliance records. Do not return this form to the ACMA.
Supplier’s details
Qualsure Consultants
ACMA supplier code number
N136
(AGENT) of
18 Hood Street Rosedale Vic. Product details Product description – brand name, type, model, lot, batch or serial number (if available) Brand Name Model Number Description
ProSoft RLXIB-IH2N Industrial Hotspot
Compliance The above mentioned product complies with the requirements of the relevant ACMA Standards made under the Radiocommunications Act 1992 and the Telecommunications Act 1997. These Standards are referenced in notices made under section 182 of the Radiocommunications Act and 407 of the Telecommunications Act. Evidence of compliance is demonstrated by test reports to the following applicable standards.
Applicable standards Standard title, number and, if applicable, number of the test report
Standard ACA Radiocommunications (Short Range Devices) AS/NZS 4268 Radiocommunications (Electromagnetic Radiation-Human Exposure) Standard
Date of Issue 2004 2008 March 2003
Declaration I hereby declare that the contents of this form are true and correct, that the product mentioned above complies with the relevant above mentioned standards and all products supplied under this declaration will be identical to the product identified above. Note: Under section 137.1 of the Criminal Code Act 1995, it is an offence to knowingly provide false or misleading information to a Commonwealth entity. Penalty: 12 months imprisonment
Gordon Slimmon Director 7 Dec 2010 QUALSURE CONSULTANTS A division of Blulen Pty Ltd (ACN 090 692 354) Registered Office 18 Hood Street Rosedale Vic. 3847 CF3410/3-1
Supplier’s declaration of conformity For compliance levels 1, 2 and 3 in Australia As required by the following Notices: Radiocommunications Devices (Compliance Labelling) Notice 2003 made under section 182 of the Australian Radiocommunications Act 1992; Radiocommunications Labelling (Electromagnetic Compatibility) Notice 2008 made under section 182 of the Australian Radiocommunications Act 1992; Radiocommunications (Compliance Labelling – Electromagnetic Radiation) Notice 2003 made under section 182 of the Australian Radiocommunications Act 1992; and Telecommunications Labelling (Customer Equipment and Customer Cabling) Notice 2001 made under section 407 of the Australian Telecommunications Act 1997
Instructions for completion This completed form remains with the supplier as part of the documentation required for the compliance records. Do not return this form to the ACMA.
Supplier’s details
Qualsure Consultants
ACMA supplier code number
N136
(AGENT) of
18 Hood Street Rosedale Vic.
Product details Product description – brand name, type, model, lot, batch or serial number (if available) Brand Name Model Number Description
ProSoft RLXIB-IH2N-W Industrial Hotspot
Compliance The above mentioned product complies with the requirements of the relevant ACMA Standards made under the Radiocommunications Act 1992 and the Telecommunications Act 1997. These Standards are referenced in notices made under section 182 of the Radiocommunications Act and 407 of the Telecommunications Act. Evidence of compliance is demonstrated by test reports to the following applicable standards.
Applicable standards Standard title, number and, if applicable, number of the test report
Standard ACA Radiocommunications (Short Range Devices) AS/NZS 4268 Radiocommunications (Electromagnetic Radiation-Human Exposure) Standard
Date of Issue 2004 2008 March 2003
Declaration I hereby declare that the contents of this form are true and correct, that the product mentioned above complies with the relevant above mentioned standards and all products supplied under this declaration will be identical to the product identified above. Note: Under section 137.1 of the Criminal Code Act 1995, it is an offence to knowingly provide false or misleading information to a Commonwealth entity. Penalty: 12 months imprisonment
Gordon Slimmon Director 7 Dec 2010
QUALSURE CONSULTANTS A division of Blulen Pty Ltd (ACN 090 692 354) Registered Office 18 Hood Street Rosedale Vic. 3847 CF3410/4-1
