www.T4i.com.au
QUALITY TOOLS FOR YOUR JOB! BUTTON DIE HOLDERS
MAGNETIC BASE HAND TAP
• Adjustable Die holder to suit button dies
TAP WRENCHES • Adjustable tap wrench • Hardened jaws • Forged steel
• Quick release tapping chuck • Magnetic base with on/off switch • Guide bar provides precise tapping • M3 - M12 capacity
Size Code ex GST Die Size Code 1" OD
(T951)
1 1/2" OD
(T952)
ex GST
9 $ 15 $
inc GST $
9.90
$
$
16.50
$
160 ex GST
176 inc GST (T0119)
M1-M10
(T863)
3/16" - 1/2"
(T011)
M10-M27
(T866)
10 22 $ 24
inc GST
$
$
$
11.00
$
24.20
$
26.40
DRILL SHARPENERS • • • • • • • •
3-13mm capacity Tough plastic construction Single chuck holding system Grinds two flute drills of unlimited length Split point operations Diamond wheel 118º Angle Strong 240V DC motor
• • • • • • •
3-13mm capacity Chisel point and split point operations ER20 Collets 3 - 13mm Grinds two flute drills of unlimited length Precision grinding results with diamond wheel Solid metal construction Angles from 118-140º • Strong 240V DC motor
EDBD-13 $ $
• • • • • •
12-25mm capacity Solid metal construction ER40 Collet holding system Precision grinding results with diamond wheel Chisel point & split point operations Angles from 100-136º
PP-13C $
115 ex GST
126.50 inc GST (D070)
$
SA-2500 $
600 ex GST
660 inc GST (D111)
$
TAPPING CHUCKS • Suitable for all drilling and milling machines for small production runs • Cushioned drive prevents thread distortion and cross threading
(T002A)
(T003)
Shank Tapping Range Code ex GST 2MT
M3-M6
2MT
M5-M10
3MT
M6-M14
(T002A) (T002) (T003)
inc GST
160 176 150 165 $ 190 209 $
$
$
$ $
1,590 ex GST
1,749 inc GST (D115)
FIXED TAPPING CHUCKS
• Pre-select torque drive to prevent tap breakage and allow for blind hole tapping • Tension and compression feature compensates between rate of feed applied and thread pitch • Includes 3 & 4MT arbors • Screwed mount
• One piece solid design • Positive clamping of the square section of the tap • Adjustable spring collet to suit all sizes in the range • 80mm extension
Shanks Tapping Range Code ex GST inc GST $ 3&4MT M8-M20 (T005) $539
490
Shank Tapping Range
Code ex GST inc GST
MT3
M10-M20
(T004B)
MT4
M10-M20
(T005B)
Specifications and prices are subject to change without notice. Prices do not include freight.
$ $
150 165 160 176 $ $
1
www.T4i.com.au
www.T4i.com.au
AL-60M LATHE MILL DRILL COMBINATION (240V) FEATURES: LATHE
FEATURES: MILL
• • • • • • • • • • • •
• Supplied with a small ground and slotted milling table which attaches to the compound slide • 2-Speed gearbox for increased torque • 350W electronic variable-speed controlled motor • Variable speed (100-2500rpm) • Slides utilise dovetail construction for maximum rigidity • Head tilts ±45º
$ $
Precision ground 'V' Bed Heavy duty A-section belt drive 550W induction lathe motor with reversing switch 6 spindle speeds (125 - 2000rpm) Powered long feed and thread cutting capabilities Rear splash tray is standard Sheet metal leadscrew cover Hinged belt cover with safety micro switch Chuck guard with safety micro switch Ball bearing oiling points Easy access fuse cover Adjustable cross and compound slide gibb keys
1,760 ex GST
1,936 inc GST (K160)
AL-320G GEARED HEAD BENCH LATHE
CENTRE LATHES • • • • • • • • • •
• • • • • •
1HP 240V motor 600mm between centres Geared headstock 160mm centre height 38mm spindle bore Metric & Imperial thread cutting • Includes 3-jaw chuck, 4-jaw chuck, faceplate, fixed & travelling steady, change gears, dead centre rear splash guard & swarf tray
$ $
1,990 ex GST
$
250 ex GST
Consisting of: • 1 x R/H & L/H tool holder • 1 x boring bar • 1 pack x 10 Inserts
12mm
Code ex GST
16mm (L451) 20mm (L452) 25mm (L453)
2
(L450)
230 250 $ 325 $ 349 $ $
AL-340A 240V $
275 inc GST (L142)
CARBIDE TURNING TOOL KITS
Size
2-Axis digital read out (AL-340D/E) 356 x 1000mm capacity 2hp 240V or 415V motor 39mm spindle bore 178mm centre height 1000mm between centres 8 speed (70-2000rpm) 240V 16 speed (35-2000rpm) 415V Includes: 3 & 4 jaw chucks, faceplate, dead centre, work light, fixed & travelling steadies, foot brake, splash tray, & stand L179D/E Includes: 2 axis DRO, quick change toolpost & leadscrew covers
STAND $
2,189 inc GST (L141)
$
$
4,150 ex GST
4,565 inc GST (L179)
253.00
$
275.00
$
357.50
$
383.90
L179D shown
AL-340D 240V 2-Axis Digital Readout $ $
4,850 ex GST
5,335 inc GST (L179D)
AL-340D 415V 2-Axis Digital Readout $ $
4,850 ex GST
5,335 inc GST (L179E)
CARBIDE PROFESSIONAL THREADING TOOL KITS PARTING TOOL KITS Consisting of: • 1 x Internal & 1 x External tool holder • 4 x inserts 2 x 55˚, 2 x 60˚ (2 x internal & external)
inc GST
356 x 1000mm
Size 12mm
Code ex GST
16mm (L457) 20mm (L458) 25mm (L459) (L456)
170 170 $ 180 $ 225
inc GST
$
$
$
187.00
$
187.00
$
198.00
$
247.50
Consisting of: • Parting off block, blade, inserts, ejector & allen key • 12-20mm includes 2 Inserts • 25mm includes 10 Inserts
Size
Blade
Code ex GST
inc GST
169 $185.90 $ 16mm 26x2mm (L465) 169 $185.90 $ 20mm 26x3mm (L466) 169 $185.90 $ 25mm 32x3mm (L467) 270 $297.00 12mm 26x2mm
(L464)
Specifications and prices are subject to change without notice. Prices do not include freight.
$
A U G U S T - O C T O B E R 2 01 1 www.T4i.com.au
HM-36 GEARED HEAD MILL DRILL
HM-46 GEARED HEAD MILL DRILL
• • • • • • • • • • • • •
• 1.1kW / 1.5hp 240V or 415V motor • 6 speeds (95-1600rpm) • Extra large 730 x 210mm ground work table with T-slots • Forward and reverse on/off switch • 3MT spindle with 75mm diameter quill • Dovetailed vertical Z-axis • Tilting head to ±90º from vertical • Spindle lock for quill • Table lock on both axis • Rear slide-way cover and slide clamps on all axis • Metric dial graduations @ 0.05mm for X & Y axis • Includes drill chuck, 3MT arbor, tungsten-tipped cutter & toolbox • Travels: (X) 475mm (Y) 195mm (Z) 450mm
1.1kW / 1.5HP, 240V motor 6 speeds (95-1600rpm) Extra large 730 x 210mm ground work table with T-slots Forward and reverse on/off switch 3MT spindle with 75mm diameter quill Adjustable table and drill length stops Rack and pinion wind-up head Rear slide-way cover and slide clamps on all axis Spindle lock for quill Tilting head to ±90º from vertical Table lock on both Axis Metric dial graduations @ 0.05mm for X & Y axis Includes drill chuck, 3MT arbor, tungsten-tipped cutter & toolbox • Travels: (X) 475mm (Y) 195mm (Z) 450mm $ $
1,650 ex GST
1,815 inc GST (M122)
240V $
STAND $ $
270 ex GST
297 inc GST (M135A)
$
GEARED HEAD LATHES 356 x 1000mm • • • • • • • •
2-Axis digital read out 356 x 1000mm capacity 2.4kW / 3.2hp 415V motor, 16 speeds 50-2000rpm (L186D) 2.25kW / 3hp 240V motor, 8 speeds 100-2000rpm (L187D) 38mm spindle bore 178mm centre height 1000mm between centres Includes: 2 axis DRO, quick change toolpost, leadscrew covers, 3 & 4 jaw chuck, faceplate, fixed & travelling steadies, dead centres, work light, foot brake, splash tray & stand
AL-540 415V $ $
6,150 ex GST
6,765 inc GST
(L186D)
L187D shown
AL-540A 240V $ $
6,150 ex GST
BORING BAR SET
HM-48 GEARED-TILTING HEAD MILL DRILLS • • • • • • • • • • • •
3-Axis digital readout system (M126D) 1.5kW / 2hp 240V motor 6 speeds (95-1600rpm) 3MT spindle with 75mm diameter lockable quill 820mm x 240mm ground work table with ‘T’-slots Tilting head to ±90º from vertical with digital display Dovetailed vertical Z-Axis Digital depth display with zero reset (M126) Longitudinal X-Axis power feed Motorised head for Z-Axis travel Includes coolant system, swarf tray & work light Travels: (X) 540mm (Y) 185mm (Z) 410mm
$
BORING BAR SETS
STAND
2,145 inc GST (M123) $2,145 inc GST (M124) $297 inc GST (M135A)
$
6,765 inc GST (L187D)
415V
1,950 ex GST $1,950 ex GST $270 ex GST
3-Axis Digital Readout $
3,250 ex GST
3,575 inc GST (M126)
CARBIDE TIPPED
$
3,950 ex GST
4,345 inc GST (M126D)
BORING HEAD KITS Capacity: 10-240mm
• 8, 10, 12, 16mm Boring Bars • 10 x Inserts CCMT060204 $ $
Capacity: 5-250mm
BORING HEAD $
275 ex GST
302.50 inc GST (L430)
END MILLS Dia.
$
12mm 80
1
16mm 90
2
20mm 110
2
25mm 120
3
25mm 140
4
(M519)
(M520) (M521) (M522) (M524)
60 66 70 77 $ 80 88 $ 90 99 $ 180 198 $
$
$
$
Size
Pce Suits Boring Heads Code ex GST inc GST
12mm 9
M182
18mm 12
M183, M184,
$
M1834, M185
$
18mm 4
M183, M184,
M1834, M185
$
390 ex GST
429 inc GST (M184)
$
1,250 ex GST
1,375 inc GST (M185)
SHANKS TO SUIT
Note: Inserts not included Tip Re-order Code (L059)
Length Tips Code ex GST inc GST
UNIVERSAL BORING & FACING $
(M180)
(M181)
(M181A)
65
$
$
85
$
$
95
$
$
71.50 3MT
R8
Taper Thread
Code ex GST inc GST
3MT 12mm
(M195A)
R8
7/16" UNF
NT30 12mm
93.50
NT40 16mm 104.50
NT30
NT40
BT40 16mm
Specifications and prices are subject to change without notice. Prices do not include freight.
119 130.90 (M196) 119 130.90 $ (M197) 119 130.90 $ (M197A) 135 148.50 $ (M197B) 235 258.50 $
$
$
$ $ $ $
3
www.T4i.com.au
www.T4i.com.au
LIVE CENTRES
LIVE CENTRES
LIVE CENTRE SETS
• Centre shaft manufactured from SKS3 steel and vacuum heat treated • Precision ground • Concentricity within 0.005mm • Centre runs on taper roller bearing and needle roller bearing
• • • • •
• C omplete with 7 interchangeable points • Insert tips consist of: 1 x carbide tip extended point 1 x pipe centre (a) 2 x female cone (b,c) 3 x various standard points
Maximum run-out tolerance of 0.0035mm Maximum turning speed 3500rpm Standard point type Used for all lathe and grinding applications Small-diameter body allowing closer access to the work piece
C0741
Taper Code ex GST 2MT 3MT 4MT
(C050) (C052) (C054)
C0751
Taper Code ex GST
inc GST
70 77 80 88 $ 110 121
Taper Max Load Code ex GST inc GST
$
$
$
$
4MT
1300kg
(C0741)
$
5MT
2000kg
(C0751)
DEAD CENTRES
129 141.90 $ 200 220.00 $
$
C040
C062
$
PIPE CENTRES
• Precision ground • Carbide tipped
C0641
2MT
(C062)
3MT
(C063)
4MT
(C0641)
inc GST
175 192.50 190 209.00 $ 250 275.00 $
$
$
$ $
LATHE CARRIER
• The cone is manufactured using CR-MO steel hardened and ground to HRC 60 ±1º • The centre uses a combination of taper roller bearings and ball bearings • Cone taper 70º
(BENT TAIL) • Manufactured from malleable iron • Square head bolt clamp screw • Baked enamel finish
C041
Size Code ex GST 2MT 3MT
(C040) (C041)
$ $
17 30
18.70
$
33.00
Code ex GST
3MT
(C045)
VERTICAL MILL SLIDE • To suit most bench lathes with approximately 300mm swing • Manufactured from cast iron • 80mm vertical slide travel - swivels 360º • Table surface 100 x 150mm - 3/8" Tee Slot • Supplied complete with 63mm drill press vice
Table Size
Vice Size Code ex GST inc GST
100 x 150mm 63mm
(L277)
inc GST
$139 $152.90 $ 4MT 128mm (C046) 175 $192.50 $ 5MT 156mm (C047) 249 $273.90
inc GST $
Taper Cone Dia.
$
160 176 $
5C COLLET CHUCK SET
$
199 ex GST
218.90 inc GST (C980)
Metric
Pce Range 7
Imperial 7 Metric
24
Imperial 17
4
Code ex GST inc GST
129 141.90 $ 1/4 - 1" (C982A) 129 141.90 $ 3-26mm (C984) 249 273.90 $ 1/16 - 1-1/16" (C985) 249 273.90 6 - 25mm
(C982)
$
$ $ $ $
22-38mm Bent Tail
$
(L081)
40 44 $
• Made of graded cast iron with precision-ground working surfaces • Table adjustment to any angle from horizontal 0º to vertical 90º • Three machined T-Slots for easy mounting 12mm (M199), 14mm (M200)
Size (LxWxH)
Code ex GST
152 x 203 x 127mm
(M199)
203 x 255 x 165mm
(M200)
$ $
DRILL CHUCKS
DRILL CHUCKS
KEYLESS
KEYED
• Knurled body with superior drill griping • Includes lock system (C299 only)
Type
Size Type Code ex GST inc GST
SWIVEL ANGLE PLATES
• Suits most lathes with 5MT headstock spindle taper & minimum 38mm bore • Capacity 3 - 26mm x 5C collets • Complete with 5MT-5C adaptor • Drawer tube 430mm long • 150mm handwheel • Collets not included
$
5C COLLET SETS
106mm
(C299)
85 99 75
185 203.50 219 240.90 $ $
• Robust design • Supplied with chuck key
(C294)
Capacity Taper Code ex GST $ 0.5-13mm JT6 (C292) $ 3-16mm JT3 (C294) $ 1-13mm JT6 (C299)
inc GST
inc GST $
93.50
$
108.90
$
82.50
Capacity Taper Code ex GST $ 1-10mm JT2 (C298) $ 0.5-13mm JT6 (C289) $ 0.5-16mm JT3 (C290)
36 49 69
inc GST $
39.60
$
53.90
$
75.90
Spare Chuck Keys To Suit: Code ex GST inc GST Suits 13mm Chuck
(C289A)
Suits 16mm Chuck
(C290A)
Specifications and prices are subject to change without notice. Prices do not include freight.
$9 $9
$
9.90
$
9.90
Includes: chuck key
A U G U S T - O C T O B E R 2 01 1 www.T4i.com.au
CLAMPS KITS - 58 PIECE
MACHINE SCREW JACKS
Slot Stud
Ideal for setup work where fine adjustment may be required or as a replacement for a step block when using a clamp kit. • Acme Threads • Manufactured from toughened steel
1/2"
3/8"UNC
5/8"
1/2"UNC
3/4"
5/8"UNC
5/8"
1/2"UNC
10mm M8x1.25 12mm M10x1.25 14mm M12x1.75 16mm M12x1.75 18mm M16x2 20mm M18x2.5 22mm M20x2.5
Code ex GST
inc GST
99 108.90 $ 99 108.90 $ 135 148.50 $ 135 148.50 $ 130 143.00 $ (C0951) 135 148.50 $ (C096) 135 148.50 $ (C096A) 135 148.50 $ (C097) 185 203.50 $ (C098) 290 319.00 $ (C099) 395 434.50 (C091) (C092) (C094) (C095) (C090)
$
$ $
C092
$ $ $ $
18 34 49 84
B
$ $
A
$
C099
$
U-CLAMPS
CLAMP KIT TEE NUTS
• Material S45C, easy adjustment, sold in pairs
• Black oxide and heat treated • Supplied in pack of 2
Slot 5/8" 10mm 12mm 14mm
Studs
A B C Code ex GST $ 32mm 56mm 75mm (M202) $ 40mm 76mm 105mm (M203) $ 50mm 102mm 160mm (M204) $ 55mm 142mm 235mm (M205)
C
$
Table Slot Code ex GST inc GST $ $ (C083) 59.40
16mm
54
1/2"x12TPI 5/8"
18mm
T-SLOT MINI CLAMPS • • •
$
19.80
$
37.40
$
53.90
$
92.40
FLANGED NUTS • Supplied in pack of 2
Stud Size Code ex GST inc GST $ $ (C084) 11.00 $ $ M8 (C085) 11.00 $ M10 (C085A) $11.00 $ M12 (C086) $12.10 $ M12 (C087) $12.10 $ M16 (C088) $13.20
10 10 10 11 11 12
1/2" UNC
Size 1/2" UNC 10mm 12mm 16mm
COOLANT PUMPS
- DROP FORGED
inc GST
Code ex GST inc GST $ $ (N084) 7.70 $ $ (N085) 8.80 $ $ (N086) 8.80 $ $ (N088) 9.90
7 8 8 9
REFRACTOMETER - BRIX 0-18
Submersible type High-tensile cast iron housing Totally enclosed motor with copper wire coils and non-corrosive plastic impellers
Voltage Motor Code ex GST Power $ 240V 1/8hp (P232) $ 415V 1/8hp (P233) $ 415V 1/4hp (P230)
• With automatic temperature compensation (ATC) • Scale: 0-18 Brix
inc GST
109 119.90 109 119.90 239 262.90
Suits Slot G F H Code ex GST inc GST 16mm
27 50 55
(C0871)
$
48
$
52.80
$ $
$
$
$
FLEXIBLE COOLANT HOSES
Thread Type
Code
1/4" BSP
Plastic / Valve
(H164)
3/8" BSP
Plastic / Valve
(H166)
1/4" Hose Magnetic Base / Valve (H170) 1/4" BSP
Steel flex hose
(PE0027A)
180 ex GST
198 inc GST (Q670)
COOLANT SYSTEM • • •
ex GST
22 26 $ 29 $ 23
Retro fit to most drilling & milling machines Gravity feed 1 litre coolant system Includes 2 x plastic bottles, flex hose nozzle, flow control valve & 2 x support brackets
inc GST
$
$
$
24.20
$
28.60
$
31.90
$
25.30
H164 PE0027A
H166
H170
$ $
25 ex GST
27.50 inc GST (P220)
Specifications and prices are subject to change without notice. Prices do not include freight.
5
www.T4i.com.au
www.T4i.com.au
PUNCH & CHISEL SETS Automatic Centre Punch
3 Piece Cold Chisel Set
6 Piece Pin Punch Set
14 Piece Punch & Chisel Set
• Automatic centre punch is ideal for punching most metals, plastic and wood. No need to use a hammer just line up, press hard to automatically punch a centre point • 130mm long • Ø13mm diameter • Knurled steel body
• 3 piece flat cold chisel set is a must for all mechanics and handymen. • Manufactured from Higrade Chrome Vanadium Steel • (Width x shaft hex x length) • 9.9 x 8.0 x 138mm • 12.6 x 11.0 x 150mm • 16.2 x 12 x 165mm
• 6 piece pin punch set is a must for all mechanics and handymen. • Manufactured from Hi-grade Chrome Vanadium Steel • (Tip Ø x shaft hex x length) • Ø3 x 10 x 150mm • Ø4 x 10 x 150mm • Ø5 x 10 x 150mm • Ø6 x 10 x 150mm • Ø7 x 12 x 150mm • Ø8 x 12 x 150mm
• 14 piece punch & chisel set is a must for all mechanics and handymen. • Manufactured from Hi-grade Chrome Vanadium Steel • 4pc Pin Punches • 1pc Center Punch • 5pc Flat Cold Chisels • 4pc Tapered Punches
$ $
9 ex GST
$
9.90 inc GST (P366)
$
15 ex GST
$
16.50 inc GST (P363)
$
18 ex GST
DRILLING MACHINES • • • •
1hp 240V motor 16-speed • 2MT 16mm drill capacity M-Section belt drive
• • • •
SBD-20B Bench $ $
286 inc GST (D138)
SPD-20B Pedestal $ $
1hp 240V motor 16-speed • 2MT 20mm drill capacity A-Section belt drive
$
• • • •
• • • •
1hp 240V motor 16-speed • 3MT 28mm drill capacity A-Section belt drive
319 inc GST (D140)
$
45 ex GST
49.50 inc GST (P364)
1.5hp 240V motor 12-speed • 3MT 31.5mm drill capacity A-Section belt drive
• • • •
1hp 240V motor 9-speed • 3MT 31.5mm drill capacity B-Section belt drive
PD-22 Pedestal $
320 ex GST
352 inc GST (D144)
$
450 ex GST
495 inc GST (D148) PD-26 Pedestal $
SPD-25A Pedestal $
290 ex GST
$
Drilling machines include: Safety micro switch on pulley guard, drill chuck and arbor
SBD-25A Bench $
260 ex GST
$
19.80 inc GST (P365)
360 ex GST
396 inc GST (D147)
$
PD-35 Pedestal $
690 ex GST
759 inc GST (D152)
$
1,180ex GST
1,298 inc GST (D162)
METAL CUTTING COLD SAWS • • • • • • • • • • • • • • •
$ $
Ø315 x 32mm blade (S836) • Ø370 x 32mm blade (S840, S841 & S842) 2.2kW / 3hp, 415V motor 85 x 110mm cutting capacity (S836) 110 x 110mm cutting capacity (S840, S841 & S842) Fast, self centring vice with two sided clamping system (S840) Infeed roller support and 500mm length stop Dual material clamp system providing burr free cuts on both pieces of material Heavy duty gearbox and separate coolant system Deadman trigger switch operation 22/44rpm - Ideal for Mild steel & Stainless steel S836 Quick release lock handle for swivel head S841 Positive stops @ 45º and 90º CE blade guard (S836 & S841) Includes heavy duty stand PV - Pneumatic self centring vice with two sided clamping system (S842 only)
3,750 ex GST
4,125 inc GST (S836)
6
$ $
4,050 ex GST
4,455 inc GST (S840)
$ $
4,400 ex GST
4,840 inc GST (S841)
S840
S842
$ $
4,950 ex GST
5,445 inc GST (S842)
Specifications and prices are subject to change without notice. Prices do not include freight.
A U G U S T - O C T O B E R 2 01 1 www.T4i.com.au
BS-7DS SWIVEL HEAD BAND SAW
EB-280DS DOUBLE MITRE BAND SAW
• • • •
• 245 x 180mm capacity at 90º • Dual mitre cut to 45º right & left, 60º right • 1.5HP - 415V, 2-speed motor 45/90mpm blade speeds • Quick action lock/release vice & swivel head • Adj. hyd. cylinder for auto feed • Hydraulic blade tension gauge • Input support roller • Coolant system
• • •
• $ $
215 x 178mm capacity at 90º Adjustable hydraulic cylinder for auto feed 1HP 240V motor Swivelling head & sliding vice Dual mitre cutting to 45º 4 speed (24-41-61-82mpm) Limit switch stops machine when cut is complete Built-in coolant system
1,650 ex GST
$
1,815 inc GST (B008A)
$
BLADES TO SUIT:
• Robust steel frame & cast iron table • Infinitely variable cutting speeds • Table tilts 15º in all 4 directions • Adjustable tungsten tipped blade guides • Blade tensioning via hand wheel • Blade air blower • Blade weld unit VB-300 (415V) 315mm throat $
2,890 ex GST
3,179 inc GST (B063)
$
VB-450 (415V) 460mm throat $
2,650ex GST
2,915 inc GST (B010)
$
3,600ex GST
3,960 inc GST (B012)
BS-7DS, EB-280DS
SUITS: BS-7DS
SUITS: EB-280DS
Type TPI Material CARBON 6
VERTICAL BAND SAWS
Code ex GST inc GST
From 25-50mm
(B210)
CARBON 8
From 13-40mm
(B212)
CARBON 10
From 9.5-35mm
(B214)
CARBON 14
From 6.4-22mm
(B216)
BI-METAL 4-6
From 25-75mm
(B400)
BI-METAL 6-10
From 9.5-50mm
(B404)
BI-METAL 10-14 From 6.4-35mm
(B408)
18 18 $ 18 $ 18 $ 44 $ 44 $ 44
Type TPI Material
Code ex GST inc GST
19.80
Bi-Metal 4-6
From 25-75mm
(B478)
$
19.80
Bi-Metal 6-10
From 9.5-50mm
(B479)
$
19.80
Bi-Metal 10-14 From 6.4-35mm
(B480)
$
19.80
$
48.40
$
48.40
$
48.40
$
$
$
57 57 $ 57 $
$
62.70
$
$
62.70
$
62.70
ROLLER CONVEYOR & STANDS • • • • • •
L
20 Rollers with 150mm pitch Lengths are pre-assembled with 7 cross-members Rollers are Ø48.3mm with commercial bearings Frames & stands are powder coated Roller capacity of 70kg each Steel rollers are zinc plated
W
150 mm ROLLER PITCH
CONVEYOR STANDS: Frame Height Width (W) Adj. (H) Conveyor (L812)
Stand (L816)
To Suit
Code ex GST inc GST
290mm
505-800mm Band Saw (L816)
290mm
715-1050mm Cold Saw
(L814)
450mm
715-1050mm Cold Saw
(L820)
450mm
505-800mm Band Saw (L822)
600mm
505-800mm Band Saw (L828)
COMES WITH 20 ROLLERS Frame Length (L) Height (H) Code ex GST inc GST Width (W) $ 290mm 3000mm 80mm (L812) $297 $ 450mm 3000mm 80mm (L818) $352 $ 600mm 3000mm 80mm (L824) $396
270 320 360
80 80 $ 80 $ 80 $ 80 $
$
$
88
$
88
$
88
$
88
$
88
LENGTH STOP (290mm x 3 Metre) SUITS: 290mm ROLLER CONVEYOR (L812)
ROLLER CONVEYOR:
H
• • • •
Includes measuring tape Mounting nuts & bolts not supplied Easily fitted to conveyor by drilling 4 holes 3 Metre length of aluminium extrusion with T-slots for easy mounting • Designed specifically to suit HAFCO (L812) 290mm x 3 metre roller conveyor • Length stop has quick-action clamp coupled with a heavy duty roller bearing
W
H
(max)
H
(min)
(L800)
Length Stop $ $
390ex GST
429 inc GST (L800)
Specifications and prices are subject to change without notice. Prices do not include freight.
7
www.T4i.com.au
www.T4i.com.au
PNEUMATIC PLANISHING HAMMER
ENGLISH WHEELING MACHINE
• • • • •
• • • • • • •
500mm throat capacity 1.2mm mild steel capacity Foot pedal operation Comes with 25, 50, 76mm radius anvils 875-1350 blows/minute
Adjustment Blows Per Minute 875 - 1350
710mm throat capacity Mild steel capacity 1.2mm Copper & Aluminium capacity 1.6mm Top anvil Ø203 x 50mm Flat 50, 76, 101, 152, 203, 254mm radius dies Bottom dies are heat treated Weight 65kg
Pneumatic Hammer Close Up View
Foot Control
$ $
Lower Anvil Rolls
Front View Of Wheels
Includes Formers
290 ex GST
$
319 inc GST (S227A)
$
590 ex GST
649 inc GST (S225A)
ELECTRIC PIPE & TUBE BENDERS TB-42 & TB-60 electric, is an accurate and powerful bending machine able to bend large diameters as well as thin and delicate pipes with optimum and constant bending radii and without any pipe deformation. This compact & versatile pipe and tube bending unit represents great value for a minimal investment
TB-42 • Cast iron body tube bender • 0.65kW 240V motor • User friendly digital control panel with microprocessor, allowing users to set the required bending angles • Capable of storing 50 programs with 9 bends per program • Electric brake and automatic return to stop • Designed to bend tube and pipe with constant bending radius without deformation • Each pipe former consists of a die former and a follow rollers to suit each size • 210º maximum bending angle • Includes formers: (1/2", 3/4", 1" NB Pipe)
TB-60 • Cast iron body tube bender • 1.1kW 240V motor • User friendly digital control panel with microprocessor, allowing users to set the required bending angles • Capable of storing 50 programs with 9 bends per program • Electric brake and automatic return to stop • Designed to bend tube and pipe with constant bending radius without deformation • Each pipe former consists of a die former and a follow rollers to suit each size • 210º maximum bending angle • Includes formers: (1/2", 3/4", 1", 1 1/4" NB Pipe)
$ $
290 ex GST
319 inc GST (T603)
MODEL
TB-42
TB-60
CODE
(T604)
(T606)
Steel Tube (OD)
TUBE FORMER SETS
TO SUIT
SUITS TB-42 & TB-60 (T610)
SUITS TB-60 (T620)
• Set of 3 Formers • Former 25.4mm, Radius 80mm Former 31.8mm, Radius 100.1mm Former 38mm, Radius 152mm
• 1 x Former • Former 51mm, Radius 195mm
$ $
8
690 ex GST
759 inc GST (T610)
mm
Ø38 x 2
Ø51 x 2
Copper & Annealed Brass Tube (OD) mm
Ø38 x 2
Ø51 x 2
Stainless Steel Tube (OD)
mm
Ø31.8 x 1.6
Ø38 x 1.6
Aluminium Tube (OD)
mm
Ø38 x 3
Ø51 x 3
Steel Pipe - Medium (NB)
mm
Ø1" x 1/8"
Ø1 1/4" x 1/8"
3 - 4 x Diameter
3 - 4 x Diameter
Centre Line Bending Radius Motor Power Voltage Dimensions (LxWxH)
$ $
490 ex GST
539 inc GST (T620)
(T606)
Optional Stand
Weight (Nett) PRICE PRICE
~ kW
0.65
1.1
V
240
240
cm kg ex GST inc GST
60 x 18 x 45
60 x 22 x 47
94
107
$ $
2,850
3,135
Specifications and prices are subject to change without notice. Prices do not include freight.
$ $
3,600
3,960
A U G U S T - O C T O B E R 2 01 1 www.T4i.com.au
Quality Cutting Edge Techonology For Industry SLOT DRILL SET
END MILL SET
COUNTERBORE SET
RADIUS CUTTER SET
• M anufactured from HSS M35 5% Co Bright Finish Screwed Shank • Two Flute
• M anufactured from HSS M35 5% Co Bright Finish Screwed Shank • Four Flute
• HSS M35 Bright finish • Plain Shank Drills • 6 piece set • Range: M3, M4, M5, M6, M8, M10
5 PCE METRIC 6, 8, 10, 12, 16mm
5 PCE METRIC 6, 8, 10, 12, 16mm
• 4 piece set • High Grade High Speed Steel M35 Bright Finish • Radius sizes: 4, 5, 6, 8mm • Shank size: 12, 12, 16, 16mm
Code ex GST inc GST
Code ex GST inc GST
Code ex GST inc GST
Code ex GST inc GST
(M3351)
$
69
$
75.90
(M3352)
END MILL SET - Solid carbide • M anufactured from Solid Carbide • Bright Finish • Plain Shank
$
69
(M337)
139
(M3381)
99
$
108.90
$
105
$
115.50
$
105
$
Code ex GST inc GST (M3355)
• Industrial quality • 118º point angle • High speed steel M2 grade 100% flute length, bright finish
128
$
(D1181)
180
$
128
$
140.80
(D1271)
COMBINATION DRILL & TAP SET
• • • •
• • • •
70
$
77.00
4 piece HSS M2 Bright Finish Cross hole type Range: 2-5, 5-10, 10-15, 15-20mm
Code ex GST inc GST (D1051)
$
60
$
66.00
$
82
• M2 grade high speed steel • Ground flutes • 118º split point
Code ex GST inc GST (T0191)
$
45
$
49.50
INDUSTRIAL COUNTERSINK SETS • • • •
(D1281)
7 piece set HSS M2 Bright Finish Hex Shank M3, M4, M5, M6, M8, M10mm • Includes Hex snap-on for Hand Drill
Code ex GST inc GST $
80
$
88.00
$
90.20
INDUSTRIAL JOBBER DRILL PACKS Size
INDUSTRIAL STEP DRILLS
(D1071)
$
29 PCE IMPERIAL 1/16" - 1/2" range Code ex GST inc GST
140.80
198.00
Suitable for sheetmetal Industrial quality HSS M2 Bright Finish Sizes: 4-12 x 1mm 6-20 x 2mm 6-30 x 2mm
CENTRE DRILL SET • • • •
6 Piece Set HSS M2 Bright Finish 3 flute type Range: 6.3, 8.3, 10.4, 12.4, 16.5, 20.5mm
Code ex GST inc GST (D1061)
$
70
$
93.50
25 PCE IMPERIAL 1 - 13mm range Code ex GST inc GST
8 PCE IMPERIAL 9/16" - 1" Range Shank Ø: 1/2" Code ex GST inc GST $
$
• P recision ground flutes • HSS M2 bright finish • 118º split point centre
8 PCE METRIC Range: 13 - 25mm Shank Ø: 13mm Code ex GST inc GST $
85
INDUSTRIAL DRILL SETS
• 1 00% HSS flute length • 14.5, 15, 16, 17, 18, 19, 20, 21, 22, 23mm
(D1171)
$
115.50
REDUCED SHANK DRILL SETS
$
108.90
• 5 piece set • HSS M35 5% Co Bright Finish • Plain Shank • 2 Flute • Range: 6, 8, 10, 12, 16mm
2MT SHANK DRILL SET
(D122)
$
BALL NOSE CUTTERS
(M3321)
Code ex GST inc GST
99
• Manufactured from HSS M2 • Plain shank • Includes 5 end mills & 5 slot drills
10 PCE IMPERIAL 1/4", 3/8", 1/2", 5/8", 3/4" Code ex GST inc GST
152.90
$
(M3391)
10 PCE METRIC 6, 10, 12, 16, 20mm Code ex GST inc GST
4 PCE METRIC 6, 8, 10, 12mm Code ex GST inc GST $
75.90
$
SLOT DRILL & END MILL SETS
(M3301)
$
$
77.00
• Industrial Quality • HSS M2 Bright Finish • No. 1, 2, 3, 4, 5
Code ex GST inc GST (D508)
$
35
$
38.50
Qty Code ex GST inc GST
1.0mm 6 1.5mm 6 2.0mm 6 2.5mm 6 3.0mm 6 3.5mm 6 4.0mm 6 4.5mm 6 5.0mm 5 5.5mm 5 6.0mm 5 6.5mm 5 7.0mm 4 7.5mm 4 8.0mm 3 8.5mm 3 9.0mm 2 9.5mm 2 10.0mm 2 10.5mm 2 11.0mm 1 11.5mm 1 12.0mm 1 12.5mm 1
Specifications and prices are subject to change without notice. Prices do not include freight.
(D8010) (D8015) (D8020) (D8025) (D8030) (D8035) (D8040) (D8045) (D8050) (D8055) (D8060) (D8065) (D8070) (D8075) (D8080) (D8085) (D8090) (D8095) (D8100) (D8105) (D8110) (D8115) (D8120) (D8125)
12 12 $ 12 $ 12 $ 12 $ 12 $ 12 $ 12 $ 12 $ 12 $ 12 $ 12 $ 12 $ 12 $ 12 $ 12 $ 12 $ 12 $ 12 $ 12 $ 12 $ 12 $ 12 $ 12 $
$
$
$
13.20 13.20 $ 13.20 $ 13.20 $ 13.20 $ 13.20 $ 13.20 $ 13.20 $ 13.20 $ 13.20 $ 13.20 $ 13.20 $ 13.20 $ 13.20 $ 13.20 $ 13.20 $ 13.20 $ 13.20 $ 13.20 $ 13.20 $ 13.20 $ 13.20 $ 13.20 $ 13.20
9
www.T4i.com.au
www.T4i.com.au
“Now there is an alternative” MICROMETERS
MICROMETER SETS
GAUGE BLOCK SETS
Outside micrometers
Code Range
Accuracy ex GST $ Q101 0-1" 0.004mm $ Q103 1-2" 0.004mm $ Q106 2-3" 0.005mm $ 0.005mm Q109 3-4" $ Q102 0.25mm 0.004mm $ Q105 25-50mm 0.004mm $ Q107 50-75mm 0.005mm $ Q110 75-100mm 0.005mm
41 50 60 70 39 50 60 70
Q116
inc GST $
45.10
$
55.00
$
66.00
$
77.00
$
42.90
$
55.00
$
66.00
$
77.00
Code Qty Range Accuracy ex GST inc GST $ Q111 3 0-75mm 0.01mm $121.00 $ $160.60 Q114 4 0-100mm 0.01mm $ $152.90 Q116 4 0-4" 0.0001"
110 146 139
Code Pieces Grade ex GST inc GST $ Q260 83 2 $493.90
449
for micrometer & vernier inspection
Outside micrometers Code Pieces Grade ex GST inc GST $ Q265 11 1 $192.50
175
Platinum Edition Code Qty Range Accuracy ex GST inc GST $ Q710 3 0-75mm 0.005mm $207.90
189
Code Range Q315 Q316 Q317 Q320 Q321 Q322 Q323 Q324
100-125mm 125-150mm 150-175mm 175-200mm 200-225mm 225-250mm 250-275mm 275-300mm
Accuracy ex GST $ $ $ $ $ $ $ $
0.006mm 0.006mm 0.007mm 0.007mm 0.008mm 0.008mm 0.009mm 0.009mm
77 88 95 110 130 136 146 160
PRECISION MACHINE LEVELS 0.02mm/mtr accuracy
DIGITAL CALIPERS
inc GST
New ITO Glass Scale Technology IP54 Splash Proof
87.40 $ 96.80 $ 104.50 $ 121.00 $ 143.00 $ 149.60 $ 160.60 $ 176.00 $
Code Size Q205 Q206 Q207
Code Size
Resolution
ex GST
$ Q1751 150mm/6” 0.01mm/0.005” $ Q1761 200mm/8” 0.01mm/0.005” $ Q1771 300mm/12” 0.01mm/0.005”
Outside micrometers With interchangeable anvils
inc GST
89 97.90 115 126.50 169 185.90 $ $ $
ex GST
$ 200mm $ 250mm $ 300mm
169 229 249
inc GST
185.90 251.90 $ 273.90 $ $
PRECISION FRAME LEVEL 0.02mm/mtr accuracy Code Size Q208 200mm
ex GST
inc GST
$
$
229.09 252.00
UNIVERSAL BEVEL PROTRACTOR
COOLANT PROOF DIGITAL CALIPER Coolant Proof
(Q201) (Q2015)
Code Size
Resolution ex GST $ Q1851 150mm/6” 0.01mm/0.005” $ Q1861 200mm/8” 0.01mm/0.005” $ Q1871 300mm/12” 0.01mm/0.005”
Code Range Q120 Q123 Q340 Q350 Q360 Q370 Q380 Q390 Q391 Q420
10
100-200mm 200-300mm 300-400mm 400-500mm 500-600mm 600-700mm 700-800mm 800-900mm 900-1000mm 1000-1200mm
Accuracy ex GST $ $ $ $ $ $ $ $ $ $
0.007mm 0.009mm 0.011mm 0.013mm 0.015mm 0.016mm 0.018mm 0.020mm 0.020mm 0.020mm
267 275 355 418 470 599 675 795 920 1,266
inc GST
293.70 $ 302.50 $ 390.50 $ 459.80 $ 517.00 $ 658.90 $ 742.50 $ 874.50 $ 1,012.00 $ 1,392.60 $
GRANITE SURFACE PLATE Code Size
inc GST
160 176.00 180 198.00 245 269.50 $ $ $
Code Index Range Accuracy ex GST inc GST Value $ Q201 5' 0-360º ±5' $108.90 $ $115.50 Q2015 5' 0-360º ±5'
99 105
DIGITAL BEVEL PROTRACTOR
Q810 600 x 600 x 100mm
Code Index Value
ex GST inc GST
Q202
30', 0.008º 0-360º ±5'
ex GST
inc GST
$
$
$
795 874.50 $
Range Accuracy
449 493.90
Specifications and prices are subject to change without notice. Prices do not include freight.
A U G U S T - O C T O B E R 2 01 1 www.T4i.com.au
“Now there is an alternative” SCREW CUTTING GAUGE - 4 thread forms
TELESCOPIC GAUGE SET
STRAIGHT DIAL TEST INDICATOR HOLDER
• 6 Piece, 8-150mm capacity Code Thread Forms ex GST inc GST $ Q612 4 $11
Code ex GST inc GST $ Q618 $55.00
10
50
Code Shank Dia. Reach ex GST inc GST $ 76mm $24.20
THREAD GAUGE SCRIBERS
• 28 Imperial / 24 Metric Code ex GST inc GST $ Q610 $15.40
Code Type
• Internal / External ex GST inc GST
$ Q614 1-7mm $ Q615 7.5-15mm
ex GST inc GST
$ Q630 Double Ended Scriber 190mm $ Q631 Pocket Scriber 145mm
RADIUS GAUGES Code Range
20 28
$ $
22
ex GST inc GST
$ 150mm/6" $ 300mm/12" $ 600mm/24" $ 1000mm/40"
6 6.60 13 14.30 19 20.90 24 26.40
Code Thickness ex GST inc GST Range $ Q616 0.03 - 1.0mm $17.60
Q620 Q621 Q622 Q623
ENGINEERS SQUARES Grade B
SPRING CALIPERS & DIVIDERS
Code Blade ex GST $ Q644 75mm $ Q645 100mm $ Q646 150mm $ Q647 225mm
Code Type
16
inc GST
29.70 38.50 $ 42.90 $ 66.00 $
$
Q4351
$ $
Q435
$
Q430
ex GST inc GST
$ Q634 Dividers $ Q635 Inside $ Q636 Outside
$
9 9 9
9.90 9.90 $ 9.90 $ $
Q436
Q636
Q634
Q635
POCKET PROTRACTOR • 150mm Stainless steel protractor
Code Reach ex GST inc GST 1-Lock Clamp $ Q430 130mm $93.50
4 piece
85
COMBINATION SET - HIGH ACCURACY
Code ex GST inc GST $ Q601 $28.60
26
VERTICAL SCALES • IP54 Splash Proof new glass technology, large clear LCD readout • USB cable for positive connection • Supplied with mounting brackets Code Size Q652 Q653 Q655 Q656 Q659
Style
200mm Horizontal 300mm Horizontal 500mm Horizontal 600mm Horizontal 150mm Vertical
ex GST
$ $ $ $ $
Code Size Q2005 12"/300mm
$
ex GST
inc GST
$
$
110 121
66.00
Fine Adjustment Clamp Q4351 300mm
$
60
$
66.00
Fine Adjustment Clamp Q436 330mm
$
109 119.90 $
Q659
CENTERING DIAL INDICATOR
Q215 Q214
Q213
$
Code Range Grad. ex GST $ Q213 0-5mm 0.01mm $ Q214 0-10mm 0.01mm $ Q215 0-30mm 0.01mm
$
Code Range Resolution ex GST inc GST $ Q650 0-999mm 0.01mm $174.90
159
69 69 79
Code Range Grad. ex GST inc GST $ Q515 0-3mm 0.01mm $165
WATER PROOF DIAL INDICATOR Code Range Grad. ex GST $ Q2145 0-10mm 0.01mm
80
$
inc GST
75.90 75.90 $ 86.90 $ $
DIAL TEST INDICATOR Metal - Long Reach
inc GST
88
Code Range Grad. ex GST inc GST $ Q2175 0-.08mm 0.01mm $185.90
169
DIGITAL INDICATORS Code Range Grad.
ex GST
$ Q220 0-12.7mm 0.01mm $ Q221 0-50mm 0.01mm
109 250
inc GST $ $
119.90 275.00
0.1º
360º (4 x 90º)
POCKET DIAL TEST INDICATOR
Code
ex GST
inc GST
$
$
Code Range Grad. ex GST inc GST $ Q224 0-0.8mm 0.01mm $108.90
130 143
$
$
SINGLE-AXIS DIGITAL DISPLAY UNIT
Q204
60
$
Q652
Resolution Range
$
PRECISION DIAL INDICATORS
150
DIGITAL PROTRACTOR
Fine Adjustment Clamp Q435 300mm
(Jewel Movement)
inc GST
104 114.40 125 137.50 198 217.80 225 247.50 109 119.90
HOLDER ONLY
Code ex GST inc GST $ Q437 $24.20
9.90 $ 20.90 $
MAGNETIC BASES
Code Size
27 35 39 60
9 19
RULERS
22.00 30.80
FEELER GAUGE
1/2 ROUND DIAL INDICATOR HOLDER
55 & 60º
14
22
Q438 4
99
Q220
Q221
DIGITAL TEST INDICATOR Code Range
Grad. ex GST inc GST $ Q2191 ±0.5mm / ±0.02" 0.003mm $198
180
Q224
Specifications and prices are subject to change without notice. Prices do not include freight.
11
www.T4i.com.au
www.T4i.com.au
PLATFORM TROLLEY
CHAIN BLOCK
GIRDER TROLLEY
• • • •
• • • • •
• • • •
907 x 608mm platform base Soft foam handle folds flat 2 fixed & 2 swivel wheels Ø203mm pneumatic wheels
S afety catch on swivel hook High resistance T(80) load chain Double safety brake pawls Ball bearing load wheel 1 Tonne capacity
300kg $ $
120 ex GST
132 inc GST (T672)
Capacity x Lift Height
Code ex GST
1 Tonne x 6M
(C153)
$
F ully adjustable to suit different beam widths Ball bearing wheels Beam width 60-195mm 1 Tonne capacity
inc GST
1 Tonne $
110 121 $
$
LIFTING SLINGS A341
1 Tonne 1 Tonne 2 Tonne 2 Tonne
Flat Slings Length Code ex GST $ 1M (H300) $ 1.5M (H305) $ 3M (H307) $ 1.5M (H310) $ 3M (H312)
9 10 15 16 25
$
9.90
$
11.00
$
16.50
$
17.60
$
$ $
• • • •
9 12 16 20 27
27.50
907kg capacity 5 swivel wheels Fold-up legs for storing Heavy duty construction $ $
SERVICE CART
2 fixed & 2 swivel / wheels 3 plastic trays (790 x 440 x 70mm) 250kg total load rating, approx 83kg per tray Includes 1 plastic storage tray handle that attaches to either side of cart
• • • • •
$
148.50 inc GST (T748)
$
75 ex GST
$
82.50 inc GST (A341)
• • • •
450kg & 230kg positions Heavy duty construction Safety hook with chain Swivels 360º
250 ex GST
$
275 inc GST (T754)
$
200 ex GST
220 inc GST (A353)
ENGINE CRANES • • • • • • •
Ideal for automotive, light engineering and general workshop Double-piston 8 tonne long stroke hydraulic lifting ram 1 tonne lift capacity Portable on six swivelling caster wheels Adjustable boom Fold-up legs for storage Weight 125kg
Floor Crane - 1T $ $
225 ex GST
247.50 inc GST (A350)
12
Floor Crane 1T Air Over Hydraulic $ $
290 ex GST
319 inc GST (A351)
Engine Tilter $ $
35 ex GST
38.50 inc GST (A342)
(A342)
SPARE:
8 Ton Rams
A350 Hydraulic $ $
99 ex GST
108.90 inc GST (J032)
A351 Hydraulic / Pneumatic $ $
(A340)
$
150 ex GST
165 inc GST (A340)
450kg TRUCK CRANE
2 fixed & 2 swivel / brake wheels Key lockable 2 drawers External Dim. L 930x W 530 x H 955mm Table slides open 2 x Push handles
135 ex GST
(A341)
• 450kg capacity • 2 fixed & 2 swivel wheels • Steel frame construction
A340
Capacity Length Code ex GST inc GST $ 1 Tonne 1M (H316) $9.90 $ 1 Tonne 2M (H318) $13.20 $ 1 Tonne 3M (H320) $17.60 $ 2 Tonne 2M (H322) $22.00 $ 2 Tonne 3M (H324) $29.70
inc GST
SERVICE CART - PLASTIC • • • •
Flat
Round
Round Slings 1 Tonne
(C183)
ENGINE STANDS
• Made from Polyester • Meets Australian standards • Sling is colour coded to SWL for safety
Capacity
85 ex GST
93.50 inc GST
150 ex GST
165 inc GST (J033)
Air Over Hydraulic Model Shown (A351)
Specifications and prices are subject to change without notice. Prices do not include freight.
A U G U S T - O C T O B E R 2 01 1 www.T4i.com.au
SB-375 SAND BLAST CABINET • • • • • • •
Pressure valve control with gauge LED control panel 2 doors for easy access Stands approximately 1.65 metres high Door safety interlocks Includes dust extraction Complete with internal low-voltage light, tempered glass screen with replacement shields, gloves, gun & ceramic tips • Weight 90kg • Recommended to use 3 x 25kg abrasive grit
INCLUDES DUST N EXTRACTIO $ $
Garnet 25kg
900 ex GST
$
990 inc GST (S300)
$
25 ex GST
Inda: Glass Beed 25kg $
27.50 inc GST (S296)
$
45 ex GST
SB-375 INSIDE CABINET SIZE
(LxWxH) 940 x 600 x 340-580mm
49.50 inc GST (S297)
INDUSTRIAL STEEL SHELVING • • • •
Industrial 4 shelf rack with strong wire mesh top 364kg capacity per shelf Dimensions (LxWxH) 1955 x 610 x 1830 Silver corrosive resistant powder coated finish • Adjustable grid pattern wire shelving • Vertical posts have double sided punched holes allowing to link units together
AUTO PARTS WASHER • • • • •
364kg
364kg
Automatic safety fusible link on lid Removable shelf Sealed recirculating motor Flexible hose 240V pump provides a flow of approximately 180 Litres/hour • 45 Litre solvent capacity • Tank size 700 x 480 x 250mm
PARTS CLEANER - CONCENTRATE
• 5L makes 50L • Water-based, safer alternative to solvent based degreaser • Dilution Rate:1 to 10 • For Engineering and industrial use Non Toxic Non Flammable Non Hazardous Non Caustic
364kg $ $
290 ex GST
$
319 inc GST (S010)
$
STORAGE & TOOLING CABINETS T766
• • • •
• • • • •
(T774)
T775
$ $
36 ex GST
39.60 inc GST (A378)
TOOLING CABINETS
T774 900 x 450 x 900mm (WxDxH) 2 x movable shelves 150kg shelf load capacity Lockable doors
150 ex GST
165 inc GST (A368)
565 x 653 x 954mm (WxDxH) 6 drawers Single key lock design for safe storage 2 fixed & 2 swivel ø125mm caster wheels 100kg per drawer capacity
(T766)
T768
• • • •
900 x 450 x 900mm (WxDxH) 75kg load capacity per drawer Steel dividers in drawers 2, 3, 4, 5, 6 Individual plastic storage containers in top drawer • 6 drawers • Includes 2 x angle stabilizing bracket feet
• • • • •
723 x 653 x 954mm (WxDxH) 6 drawers Single key lock design for safe storage 2 fixed & 2 swivel ø125mm caster wheels 100kg per drawer capacity
(T768) (T775)
$ $
250 ex GST
275 inc GST (T774)
$ $
750 ex GST
825 inc GST (T775)
$ $
630 ex GST
693 inc GST (T766)
$ $
750 ex GST
825 inc GST (T768)
Specifications and prices are subject to change without notice. Prices do not include freight.
13
www.T4i.com.au
www.T4i.com.au
DS-15S DISC SANDER
L-80 BELT LINISHER SANDER
• Large 380mm sanding disc • 1.5kW / 2hp brake motor allowing disc to stop with-in 3 seconds • The 63mm dust port from disc sander has been ducted through cabinet to a single 100mm outlet at rear of cabinet • Heavy 400 x 375mm cast iron slot table • Tilting table up 0-15º / down 0-45º • Enclosed cabinet stand • Motor speed 1462rpm
• • • • • • • • •
240V $ $
1,650 ex GST
415V $
1,815 inc GST (L1352)
$
$
1,650 ex GST
$
1,815 inc GST (L1354)
P-200H PLANER JOINTER • • • • • • • • • •
$ $
4 knife cutter head 200mm width capacity 1770mm table with 13mm rebating 1.5kW / 2hp 240V motor Adjustable in & out feed tables Rigid quick action tilting fence to 45˚ with adjustable stops Magnetic safety switch with raised emergency stop button Spring loaded blade guard 100mm dust collector port Includes stand
840 ex GST
924 inc GST (L112)
hms 2600ci PLANER THICKNESSER • German design & technology • Heavy duty machines CAST IRON tables (easily and accurately adjustable) • Unique vulcanised rubber feed system on the thickness mode • 250 x 210mm thickness capacity • 100mm dust collector port • 3mm stock removal • Powerful 3HP motor for constant feed in both hard and soft timbers • Large professional planing fence • Cast Iron thickness table adjustment to 1/10mm for super fine finishing
240V $
900 ex GST
990 inc GST (W629)
$
T-330 THICKNESSER • • • • • • • • •
150 x 2260mm belt Heavy duty 1.1kW / 1.5hp 240V dust proof motor Easy tracking adjustment Cast iron Table 755 x 250mm Cast iron table Belt tilts Horizontal and vertical For use flat or on edge 100mm dust collector port Includes stand, end table, graphite pad & mitre guide
330 x 152mm capacity 1.8kW / 2.5hp 240V motor 2 speed feed gearbox Digital height readout 4 post design Two double sided blades Anti-Kick back fingers Cam-action headlock lever Includes stand
1,350 ex GST
1,485 inc GST (W850)
T-380A THICKNESSER • • • • • • • • • • •
Solid cast iron construction 380 x 150mm wide capacity 1.5kW / 2hp 240V motor 3 blade cutter head 2 speed feed gearbox Digital height gauge 100mm dust chute Anti-Kick back fingers Top material feed rollers In and out feed rollers Includes stand
INCLUDES STAND
$ $
450 ex GST
495 inc GST (W805)
14
INCLUDES STAND
$ $
1,290 ex GST
1,419 inc GST (W414)
Specifications and prices are subject to change without notice. Prices do not include freight.
A U G U S T - O C T O B E R 2 01 1 www.T4i.com.au
WL-46 ELECTRONIC SPEED WOOD LATHE
ST-250 TABLE SAW WITH SLIDING TABLE
• • • • •
• • • • • •
Electronic variable speed (100-3200rpm) with a digital display 1.5kW / 2hp 240V motor variable speed motor 462mm swing over bed 1194mm between centres Full cast iron head, bed & stand
CAST IRON BED & STAND
$ $
1250mm SLIDING TABLE Bowl turning attachment $
1,450 ex GST
1,595 inc GST (W387)
$
90 ex GST
$
99 inc GST (W387A)
DC-3 DUST COLLECTOR • • • • • •
2.2kW / 3hp 240V motor Tilt arbor to 45˚ 75mm depth of cut Ø254mm blade 1250mm travel sliding work table 865 x 800mm table size with side extension • 600 ripping capacity • 100mm dust collector port • Includes mitre guide
1200CFM 1.5kW / 2hp 240V motor Portable, on wheels 5 Micron filter bag Quick-action filter bag clamps Twin inlets 100mm
$
1,290 ex GST
1,419 inc GST (W450)
DUST COLLECTOR HOSE
FC-10 FILTER CARTRIDGE
• Priced per metre
• • • •
Increases filtering area by 700% 1 micron filtration Includes 10 plastic bottom bags 500mm Dia. x 600mm high
Diameter Code ex GST inc GST
$ $
290 ex GST
319 inc GST (W394)
BASATO 3H VARIO BAND SAW • • • • • • • • • • • •
305mm throat capacity 205mm height capacity Variable speed system 370 to 750m/min 548 x 400mm cast iron table 0.8kW / 1.1hp 240V motor -17 to +45º table adjustment 1020mm table height Ø100mm suction connector Twin 3-roller precision blade guides Precision rip fence with magnifier Patented table tilting from -17º to +45º Includes mitre guide, wheel kit & Ø95mm dust collector port
$
590 ex GST
649 inc GST (W855)
(W3985)
100mm
(W398)
125mm
(w398A)
11 12.10 12 13.20 $ 25 27.50 $
$
$
$ $
$ $
180 ex GST
198 inc GST (W328)
BASATO 4 BAND SAW • • • • • • • • • • • •
$
63mm
$ $
Twin 3-roller precision blade guides 375mm throat capacity 250mm height capacity Precision rip fence with magnifier Table tilting from -17º to 45º 548 x 400 mm cast iron table Quick release mechanism for quick blade change Balanced & polished band wheels fitted with a rubber facing Two cutting speeds 800 / 1200 m/min 1.5kW / 2hp 240V motor Cabinet base with storage facility and wheels assembly standard Includes mitre guide
900 ex GST
990 inc GST (W856)
Specifications and prices are subject to change without notice. Prices do not include freight.
15
www.T4i.com.au
www.T4i.com.au
PORTABLE HARDNESS TESTER
PORTABLE VIDEOSCOPE
• Measuring range: (170-960)HLD, (17-68.5)HRC, (19-651)HB, (80-976)HV, (30-100)HS, (59-85)HRA, (13-100)HRB • Measuring direction: 360° • Hardness Scale: Leeb, Brinell, Rockwell A,B,C, Vicker, Shore (HL, HB, HRB, HRC, HRA, HV, HS) • Data memory: max. 100 groups (relative to impact times 32~1) • Communication interface: RS232 • LCD display
The new revolutionary tool for examining hard to reach places. The 1 meter flexible shaft with LED lights on either side of the camera lens gives a clear image in even dark places. Includes pick up hook, magnetic pick up tool, mirror tool, camera with LED light & carry case. • 60mm color screen • 1 Meter flexible shaft • 2 Meter extension • 9 volt battery • Protective plastic carry case • Includes pick up tools: magnetic, hook & mirror Camera and LED light
$ $
1,150 ex GST
$
1,265 inc GST (Q520)
$
239 ex GST
262.90 inc GST (M697)
EP-1 OPTICAL PROJECTOR High Precision Linear Guideways. Swiss made SCHEEBERGER high precision linear guideways are used for all X, Y, & Z-Axis movement to provide high accuracy • • • •
Table Glass size 225 x 125mm Measurement travel 200 x 100mm 315mm Screen Diameter 10x, 20x & 50x Lens available (Standard machine 10x only) • Digital Readout X, Y & A, 1um • Thermal Printer, Rotary Table
$ $
DRO Projector
Table Glass
Measuring System Specifications Axis Resolution Co-ordinates Memory Error Comp. I/O Interface Measurement Features
8,100 ex GST
8,910 inc GST (M008)
X,Y, Axis linear transducers A axis rotary encoder 0.001mm (X, Y-Axis) / 0.01den. (A axis) X,Y Polar Coordinate system 99 Feature memories: 10 coordinate memories Linear and non linear error compensation RS-232C I/O Interface 3 points circle Measurement Points Measurement 2 points distance Measurement 2 points form a line Measurement 2 Intersecting line Measurement 4 point line intersection Measurement Point line perpendicular projection
www.T4i.com.au Specifications and prices are subject to change without notice. Prices do not include freight.
Specials from:
Prices valid for August - October 2011
16
www.T4i.com.au
