PUZZLE DESK - DESK COMPONENT HARDWARE

16 - cams

1 - large screw

Thank you for purchasing the Puzzle Desk. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.

16 - cam screws

12 - wood dowels

17 - cam covers

Missing hardware? Please call 800.606.6387 for replacements.

TOOLS REQUIRED Phillips head screwdriver Large Allen Wrench (included)

COMPONENTS DESK COMPONENT ASSEMBLY

1 - desk back panel

1 - desk bottom panel

1 - desk top panel

Made in China - r12

1 - desk side panel

1 - desk short side panel The Puzzle Desk consists of 2 separate components, the File and the Desk. The following instructions are for assembly of the Desk Component.

Customer Service 800.967.6696 | www.crateandbarrel.com

Page 1 of 3

PUZZLE DESK - DESK COMPONENT A

Desk Side Panel

B

Desk Short Side Panel

A

Desk Back Panel

B

Desk Bottom Panel

Make sure arrow on each cam points towards edge

D C

C

Desk Short Side Panel

Desk Side Panel

Desk Top Panel

1 A. Insert 6 cam screws and 4 wood dowels in the desk side panel. Secure, but do not over tighten cam screws with a phillips head screwdriver. B. Insert 3 cam screws in the desk short side panel and secure with a screwdriver. C. Insert 7 cam screws in the desk top panel and secure with a screwdriver.

2 A. Insert 2 wood dowels and 4 cams into the desk back panel. Make sure the arrow on each cam points towards the nearest edge. B. Insert 6 cams into the desk bottom panel. C. Insert 3 cams and 2 wood dowels into the desk side panel. D. Insert 3 cams and 4 wood dowels into the desk short side panel.

Note: This is the front of the assembly. Make sure pre-installed drawer pulls out in this direction.

3 A. Fit desk short side panel onto desk bottom panel as shown, aligning cam screws with corresponding holes. B. Secure panels by turning each cam clockwise with a phillips head screwdriver until each cam securely engages each cam screw. Made in China - r12

4 Fit panel assembly onto cam screws of desk side panel as shown. Secure panels by turning each cam clockwise with a phillips head screwdriver until each cam securely engages each cam screw.

Customer Service 800.967.6696 | www.crateandbarrel.com

Page 2 of 3

PUZZLE DESK - DESK COMPONENT B A

A

B 5 A. Fit cam screws of desk side panel into corresponding holes in desk back panel. Secure all 3 cams with a screwdriver. B. Fasten top of desk back panel to bottom shelf with 1 large screw. Fully tighten with the large allen wrench.

6 A. Fit cam screws of desk top panel into corresponding holes in side panels. Secure all 6 cams with a screwdriver. C. Conceal all exposed cams with cam covers.

CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer.

7 With the assistance of another adult, place desk component onto file component as shown. Assembly is now complete.

Made in China - r12

Customer Service 800.967.6696 | www.crateandbarrel.com

Page 3 of 3

PUZZLE DESK - FILE COMPONENT HARDWARE

35 - cams

2 - drawer pulls

2 - large wood screws

Thank you for purchasing the Puzzle Desk. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.

COMPONENTS

1 - file left side panel

1 - file top panel

1 - large drawer bottom

28 - wood dowels

6 - small wood screws

2 - file support rails

30 - cam covers

16 - bolts

2 - file drawer glides

Missing hardware? Please call 800.606.6387 for replacements.

TOOLS REQUIRED Phillips head screwdriver Small Allen Wrench (included)

Drawer glide on this side

1 - file interior panel

1 - file shelf

1 - file right side panel

1 - large inner drawer front

1 - large drawer front

2 - foot panels

1 - foot stretcher

2 - small drawer sides (1 left, 1 right) Made in China- r14

4 - machine screws

35 - cam screws

1 - file bottom panel

1 - large drawer back

1 - small drawer front

1 - small drawer back

1 - file back panel

2 - large drawer sides (1 left, 1 right)

1 - small inner drawer front

1 - small drawer bottom

Customer Service 800.967.6696 | www.crateandbarrel.com

Page 1 of 6

PUZZLE DESK - FILE COMPONENT FILE COMPONENT ASSEMBLY

The Puzzle Desk consists of 2 separate components, the File and the Desk. The following instructions are for assembly of the File Component.

A

C

D

E

F

1 A. Insert 3 cam screws, 3 cams and 2 wood dowels into file right side panel as shown. B. Insert 9 cam screws, 3 cams and 2 wood dowels into file left side panel. C. Insert 4 cam screws, 6 cams and 4 wood dowels into file top panel. D. Insert 10 cam screws into the file bottom panel. E. Insert 6 cams,4 wood dowels and 3 cam screws into the file interior panel. F. Insert 6 cams and 4 wood dowels into the file shelf.

2 Fit file shelf onto cam screws of the file interior panel. Secure each cam by turning clockwise with a phillips head screwdriver until each cam securely engages each cam screw.

Made in China - r14

B

3 With the assistance of another adult, fit file top panel onto the assembly, aligning cam screws and corresponding holes in desk interior panel. Secure all cams with a screwdriver.

Customer Service 800.967.6696 | www.crateandbarrel.com

Page 2 of 6

PUZZLE DESK - FILE COMPONENT

A

B

4 A. Insert 6 wood dowels and 5 cams into the file back panel as shown. Make sure arrows on each cam point towards nearest edge with holes. B. Turn file back panel over and fit into corresponding holes in file top panel as shown. Secure cam by turning clockwise with a phillips head screwdriver.

5 Fit cam screws of file left side panel into corresponding holes in the assembly. Lock all 9 cams by turning clockwise with a phillips head screwdriver.

Unfinished edges face “up”

A B

6 Fit cam screws of file right side panel into corresponding holes on the assembled unit. Secure 3 cams with a phillips head screwdriver.

Made in China - r14

7 A. Insert 2 cams into the foot stretcher and 1 cam screw into each foot panel. Make sure unfinished edges of each panel faces “up” as shown. Fit cam screws of foot panels into ends of foot stretcher and secure each cam with a phillips head screwdriver. B. Insert 4 cam screws into underside of file bottom panel as shown. Insert 4 cams and 4 wood dowels into the foot panels. Fit cam screws of bottom panel into holes on foot panels and secure each cam with a screwdriver.

Customer Service 800.967.6696 | www.crateandbarrel.com

Page 3 of 6

PUZZLE DESK - FILE COMPONENT

Aprox 3/4”

8 Fit file bottom panel onto the underside of the assembly as shown, aligning the dowels and cam screws with corresponding holes. Secure 10 cams with a phillips head screwdriver.

9 Attach 1 drawer glide to the file left side panel and 1 drawer glide to the file interior panel with 2 small wood screws per glide. Make sure the final installed position of the glide is approximately 3/4” from the front edge of each panel as illustrated.

A

A B B 10 A. Attach right and left small drawer sides to small drawer back with 4 bolts as shown. Secure, but do not over tighten with the small allen wrench. B. Slide small drawer bottom into slot at bottom of back and side panels. Made in China - r14

11 A. Fit small inner drawer front onto assembly as shown. Attach with 4 bolts from the sides and secure with the small allen wrench. B. Align holes small drawer front panel with holes on assembly. Insert 2 machine screws through drawer fronts and into 1 drawer pull. Secure with a phillips head screwdriver.

Customer Service 800.967.6696 | www.crateandbarrel.com

Page 4 of 6

PUZZLE DESK - FILE COMPONENT A A

B

B 12 A. Attach right and left large drawer sides to large drawer back with 4 bolts as shown. B. Slide large drawer bottom into slot at bottom of back and side panels.

13 A. Fit large inner drawer front onto assembly as shown. Attach with 4 bolts and secure with the small allen wrench. B. Align holes large drawer front with holes on assembly. Insert 2 machine screws through drawer fronts and into 1 drawer pull. Secure with a phillips head screwdriver. Finalize drawer front attachment with 2 large wood screws from underside of drawer box front.

Install rail here for Standard Hanging Files

Install rail here for Legal Hanging Files

B A

A B 14 A. Insert small drawer assembly into the case as shown, fitting wheels of drawer glides into rails of case glides. B. Fully extend ball bearing glides for large drawer. Align glides on drawer sides with glides installed in case. Applying firm, even pressure, push large drawer into assembly until it fits flush with the front of the case. Made in China - r14

15 A. Determine if you want to use standard or legal size hanging files. Fit 2 file support rails in the appropriate slots as illustrated above. B. Conceal all exposed cams with cam covers.

Customer Service 800.967.6696 | www.crateandbarrel.com

Page 5 of 6

PUZZLE DESK - FILE COMPONENT

16 With the assistance of another adult, place desk component onto file component as shown. Assembly is now complete.

CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer.

Made in China - r14

Customer Service 800.967.6696 | www.crateandbarrel.com

Page 6 of 6