PUSH BUTTONS & CONTACT DEVICES
Push Button Plates
147-1 & 149-1 FEATURES The Edwards Cat. No. 147-1 Push Button Plate is used for mounting
> Standard switch box mounting
620 and 690 series 5/8" (16mm) buttons on a standard single gang box. See catalog pages 10-9 and 10-10 for 620 and 690 series push
> Stainless steel
buttons. The Edwards Cat. No. 149-1 Push Button Plate is used for mounting 821, 850, and 854 series 7/8" (22mm) buttons on a standard single gang box. See catalog pages 10-12 and 10-13 for 821, 850, and 854 series push buttons. Designed for single gang mounting using the mounting holes on 3 9/32" (83mm) centers. Mounting screws furnished.
2 3/4" (79mm)
4 1/2" (114mm)
D-04
90 Fieldstone Court | Ph: 203.699.3300 |
Cheshire, CT 06410 Fx: 203.699.3108
www.edwards-signals.com
10-11
© Copyright 2004 Edwards
PUSH BUTTONS & CONTACT DEVICES
Weatherproof Push Buttons For Outdoor Use 1786 Series F E AT U R E S > Surface mount
Attractive, high quality weatherproof push button. The push button
> Solid brass construction
has a neoprene diaphragm to protect the integral, long-life, phos-
> Normally open momentary contacts
phor bronze contact springs. The 1786C-B has an additional bakelite back plate threaded for 1/2" (13mm) conduit. For exterior use at home, apartment and office.
SPECIFICATIONS > Contact rating: 12V: 4 amps AC, 4 amps DC
1 3/16" (30mm)
1 3/8" (30mm)
24V: 4 amps AC, 2 amps DC 48V: 2 amps AC, 1 amp DC 2 13/32" (61mm)
2 13/32" (61mm)
Cat No. 1786C-B
Cat No. 1786-B
Conduit Back Plate
Housing
Finish Center
1786-B
No
Solid
Solid
1786C-B
Yes
Brass
Brass
10-16
D-04
Cat. No.
90 Fieldstone Court | Ph: 203.699.3300 |
Cheshire, CT 06410 Fx: 203.699.3108
www.edwards-signals.com
© Copyright 2004 Edwards
ADA/HOSPITAL SIGNALING DEVICES
Bedside Stations
7302 Series FEATURES > 3 maintained contacts > Stainless steel face plate > "Emergency" engraved units available SPECIFICATIONS > 3 amps at 125V AC; 0.5 amps at 125V DC
The Edwards Bedside Station provides emergency call activation. Calls are placed by pulling one of the attached 6 foot (1.83m) cords. Cords are replaceable with a standard nylon cord. Designed for either flush or surface mounting. Unit fits in a standard single-gang electrical box and plaster cover. For surface mounting, use a Wiremold surface box. All boxes must have a minimum depth of 1 3/4" (44mm). Boxes and covers not supplied. Use in private and semi-private hospital rooms. Use in emergency stations and patient bath and toilet areas, hospitals, public restrooms, and handicapped areas.
2 3/4" (70mm)
7/8" (22mm)
1 3/8" (35mm)
14-14
D-04
4 1/2" (114mm)
90 Fieldstone Court | Ph: 203.699.3300 |
Cheshire, CT 06410 Fx: 203.699.3108
www.edwards-signals.com
Cat. No.
Description
7302A
Double cord
7302AE
Double cord, face plate engraved "Emergency" © Copyright 2004 Edwards
PUSH BUTTONS & CONTACT DEVICES
Manual Emergency Pull Station 78 FEATURES The Catalog No. 78 pull station is a low voltage device used to perform emergency shutdown of equipment or alert personnel to dan-
> Break glass type > Red plastic finish
gerous conditions.
SPECIFICATIONS For replacement glass rods, order Part No. P-027024. The 78 may be surface mounted or mounted on a gem box or single
> Contact rating 5.0 amps at 24V AC > Normally open contact
gang plaster cover. For use in factories to shut down equipment or production lines in the event of an emergency. Also used to alert personnel to a dangerous condition or to signal personnel evacuation in the event of an emergency.
2 7/8" (73mm)
1 1/16" (27mm)
4 5/8" (117mm)
D-04
90 Fieldstone Court | Ph: 203.699.3300 |
Cheshire, CT 06410 Fx: 203.699.3108
www.edwards-signals.com
10-21
© Copyright 2004 Edwards
PUSH BUTTONS & CONTACT DEVICES
Weatherproof Push Button 852 SYSTEM REQUIREMENTS > Flush mount
The 852 flush weatherproof push button features an 850 push but-
> Satin chrome finish
ton with a weatherproof diaphragm enclosing the mechanism. The 4 11/16" (119mm) x 2 7/8" (73mm) wall plate has a rubber gasket for
> High voltage
weather tight integrity.
> Normally open contacts
For flush mount, exterior, high voltage use.
SPECIFICATIONS > Contact rating: 12V: 10 amps AC, 10 amps DC 24V: 10 amps AC, 10 amps DC 32V: 10 amps AC, 8 amps DC
2 19/32" (66mm) 1/2" (13mm)
48V: 10 amps AC, 7 amps DC 125V: 6 amps AC, 3 amps DC 250V: 3 amps AC, 1 amp DC > Hole depth: 2 1/16" (52mm)
10-14
D-04
4 9/16" (116mm)
90 Fieldstone Court | Ph: 203.699.3300 |
Cheshire, CT 06410 Fx: 203.699.3108
www.edwards-signals.com
© Copyright 2004 Edwards
FIRE ALARM EQUIPMENT
Electromagnetic Door Holder Floor Mount, Single Door, Multi-voltage 1501 Series FEATURES > Die cast metal construction
The 1501 Series electromagnetic door holder is a high quality device
> Powder epoxy aluminum finish
for use with single doors. The electromagnet assembly is designed
> Mounting hardware included
for floor mounting and operates on 24V AC/DC or 120V AC.
AGENCY APPROVALS > UL Listed
The electromagnet is designed to be floor mounted using the supplied floor mounting plate. Field wiring connections are made to the wiring inside the electromagnet. The catch plate assembly may be mounted to the door either by through-bolting or by using the con-
> FM Approved
cealed surface mounting plate.
SPECIFICATIONS
Designed to be used on self-closing, swinging doors to automati-
> 25 lb (11.3kg) minimum holding force
cally isolate an area when activated by fire alarm, smoke detection or sprinkler systems. Can also be operated by manual control — wherever the instant closing of doors is necessitated for safety or for convenience. Hospitals — for stairwell doors, room doors, long corridors, schools — exit door (closes all doors at once by pushbutton control); offices (instant privacy by pushing a button on your desk), nursing homes and public buildings. The 1501 Series door holder is an auxiliary device designed for applications that require holding single doors.
Description
CS2595-5 CS2598-5
Catch plate kit - short Catch plate kit - long
12-68
D-04
ACCESSORIES Cat. No.
90 Fieldstone Court | Ph: 203.699.3300 |
Cheshire, CT 06410 Fx: 203.699.3108
www.edwards-signals.com
© Copyright 2004 Edwards
FIRE ALARM EQUIPMENT TECHNICAL INFORMATION
1 5/8" (41mm) Door
4 13/16" (122mm)
4 1/2" (114mm)
3 1/4" (83mm)
1 3/4" (44mm) 4 5/8" (117mm)
Catalog Number
Volts
Amps
1501-AQN5
24V AC* 24V DC 120V AC
0.015 0.015 0.015
*60Hz
D-04
90 Fieldstone Court | Ph: 203.699.3300 |
Cheshire, CT 06410 Fx: 203.699.3108
www.edwards-signals.com
12-69
© Copyright 2004 Edwards
FIRE ALARM EQUIPMENT
Electromagnetic Door Holder Floor Mount, Double Door, Multi-voltage 1502 Series FEATURES > Die cast metal construction > Powder epoxy aluminum finish > Mounting hardware included AGENCY APPROVALS > UL Listed
The 1502 Series electromagnetic door holder is a high quality device for use with double doors. The electromagnet assembly is designed for floor mounting and operates on 24V AC/DC or 120V AC. The electromagnet is designed to be floor mounted using the supplied floor mounting plate. Field wiring connections are made to the wiring inside the electromagnet. The catch plate assembly may be mounted to the doors either by through-bolting or by using the con-
> FM Approved
cealed surface mounting plates.
SPECIFICATIONS
Designed to be used on self-closing, swinging doors to automati-
> 25 lb (11.3kg) minimum holding force
cally isolate an area when activated by fire alarm, smoke detection or sprinkler systems. Can also be operated by manual control — wherever the instant closing of doors is necessitated for safety or for convenience. Hospitals — for stairwell doors, room doors, long corridors, schools — exit door (closes all doors at once by pushbutton control); offices (instant privacy by pushing a button on your desk), nursing homes and public buildings. The 1502 Series door holder is an auxiliary device designed for applications that require holding double doors.
Description
CS2595-5 CS2598-5
Catch plate kit - short Catch plate kit - long
12-70
D-04
ACCESSORIES Cat. No.
90 Fieldstone Court | Ph: 203.699.3300 |
Cheshire, CT 06410 Fx: 203.699.3108
www.edwards-signals.com
© Copyright 2004 Edwards
FIRE ALARM EQUIPMENT TECHNICAL INFORMATION
1 5/8" (41mm) Door
4 7/8" (124mm)
4 1/2" (114mm)
3 1/4" (83mm)
1 3/4" (44mm) 4 5/8" (117mm) Armature (one for each door)
Catalog Number
Volts
Amps †
1502-AQN5
24V AC* 24V DC 120V AC
0.015 0.015 0.015
*60Hz
† Values given are per coil. There are two coils in the device.
D-04
90 Fieldstone Court | Ph: 203.699.3300 |
Cheshire, CT 06410 Fx: 203.699.3108
www.edwards-signals.com
12-71
© Copyright 2004 Edwards
FIRE ALARM EQUIPMENT
Electromagnetic Door Holder Flush Wall Mount, Multi-voltage 1504 Series FEATURES > Die cast metal construction > Powder epoxy aluminum finish > Mounting hardware included
The 1504 Series electromagnetic door holder is a high quality device for use with single doors. The electromagnet assembly is designed for flush wall mounting and operates on 24V AC/DC or 120V AC. The electromagnet is designed to be flush wall mounted inside a
AGENCY APPROVALS
standard single gang outlet box (not supplied). Field wiring connec-
> UL Listed
tions are made to the electromagnet inside the electrical box. The
> FM Approved
catch plate assembly may be mounted to the door either by through-bolting or by using the concealed surface mounting plates.
SPECIFICATIONS > 25 lb (11.3kg) minimum holding force
Designed to be used on self-closing, swinging doors to automatically isolate an area when activated by fire alarm, smoke detection or sprinkler systems. Can also be operated by manual control — wherever the instant closing of doors is necessitated for safety or for convenience. Hospitals — for stairwell doors, room doors, long corridors, schools — exit door (closes all doors at once by pushbutton control); offices (instant privacy by pushing a button on your desk), nursing homes and public buildings. The 1504 Series door holder is an auxiliary device designed for wall mount applications that require holding single doors.
Description
1500-1 1500-2 1500-7 1500-12 CS2595-5 CS2598-5
1.5" Extension Kit (see pg. 12-67) 2" Extension Kit (see pg. 12-67) 7" Extension Kit (see pg. 12-67) 12" Extension Kit (see pg. 12-67) Catch plate kit - short Catch plate kit - long
12-72
D-04
ACCESSORIES Cat. No.
90 Fieldstone Court | Ph: 203.699.3300 |
Cheshire, CT 06410 Fx: 203.699.3108
www.edwards-signals.com
© Copyright 2004 Edwards
FIRE ALARM EQUIPMENT TECHNICAL INFORMATION
13/16" (21mm)
2 3/4" (70mm)
2 5/8" (67mm)
1 3/4" (44mm)
4 5/8" (117mm)
Catalog Number
Volts
Amps
1504-AQN5
24V AC* 24V DC 120V AC
0.015 0.015 0.015
*60Hz
D-04
90 Fieldstone Court | Ph: 203.699.3300 |
Cheshire, CT 06410 Fx: 203.699.3108
www.edwards-signals.com
12-73
© Copyright 2004 Edwards
FIRE ALARM EQUIPMENT
Electromagnetic Door Holder Flush Wall Mount, Multi-voltage 1505 Series FEATURES > Die cast metal construction > Powder epoxy aluminum finish > Mounting hardware included AGENCY APPROVALS > UL Listed
The 1505 Series electromagnetic door holder is a high quality device for use with single doors. The electromagnet assembly is designed for flush wall mounting and operates on 24V AC/DC or 120V AC. The electromagnet is designed to be flush wall mounted inside a standard single gang outlet box (not supplied). Field wiring connections are made to the electromagnet inside the electrical box. The catch plate assembly may be mounted to the door either by
> FM Approved
through-bolting or by using the concealed surface mounting plates.
SPECIFICATIONS
Designed to be used on self-closing, swinging doors to automati-
> 25 lb (11.3kg) minimum holding force
cally isolate an area when activated by fire alarm, smoke detection or sprinkler systems. Can also be operated by manual control — wherever the instant closing of doors is necessitated for safety or for convenience. Hospitals — for stairwell doors, room doors, long corridors, schools — exit door (closes all doors at once by pushbutton control); offices (instant privacy by pushing a button on your desk), nursing homes and public buildings. The 1505 Series door holder is an auxiliary device designed for wall mount applications that require holding single doors.
Description
1500-1 1500-2 1500-7 1500-12 CS2595-5 CS2598-5
1.5" Extension Kit (see pg. 12-67) 2" Extension Kit (see pg. 12-67) 7" Extension Kit (see pg. 12-67) 12" Extension Kit (see pg. 12-67) Catch plate kit - short Catch plate kit - long
12-74
D-04
ACCESSORIES Cat. No.
90 Fieldstone Court | Ph: 203.699.3300 |
Cheshire, CT 06410 Fx: 203.699.3108
www.edwards-signals.com
© Copyright 2004 Edwards
FIRE ALARM EQUIPMENT TECHNICAL INFORMATION
2 3/4" (70mm)
13/16" (21mm)
1 5/8" (67mm)
1 3/4" (44mm)
4 5/8" (117mm)
Catalog Number
Volts
Amps
1505-AQN5
24V AC* 24V DC 120V AC
0.015 0.015 0.015
*60Hz
D-04
90 Fieldstone Court | Ph: 203.699.3300 |
Cheshire, CT 06410 Fx: 203.699.3108
www.edwards-signals.com
12-75
© Copyright 2004 Edwards
FIRE ALARM EQUIPMENT
Electromagnetic Door Holder Surface Wall Mount, Multi-voltage 1508 Series FEATURES > Die cast metal construction > Powder epoxy aluminum finish > Mounting hardware included AGENCY APPROVALS > UL Listed
The 1508 Series electromagnetic door holder is a high quality device for use with single doors. The electromagnet assembly is designed for surface wall mounting and operates on 24V AC/DC or 120V AC. The electromagnet is designed to be surface wall mounted inside a standard single gang outlet box (supplied). Field wiring connections are made to the electromagnet inside the electrical box. The catch plate assembly may be mounted to the door either by through-bolting
> FM Approved
or by using the concealed surface mounting plates.
SPECIFICATIONS
Designed to be used on self-closing, swinging doors to automatically
> 25 lb (11.3kg) minimum holding force
isolate an area when activated by fire alarm, smoke detection or sprinkler systems. Can also be operated by manual control — wherever the instant closing of doors is necessitated for safety or for convenience. Hospitals — for stairwell doors, room doors, long corridors, schools — exit door (closes all doors at once by pushbutton control); offices (instant privacy by pushing a button on your desk), nursing homes and public buildings. The 1508 Series door holder is an auxiliary device designed for wall mount applications that require holding single doors.
Description
1500-1 1500-2 1500-7 1500-12 CS2595-5 CS2598-5
1.5" Extension Kit (see pg. 12-67) 2" Extension Kit (see pg. 12-67) 7" Extension Kit (see pg. 12-67) 12" Extension Kit (see pg. 12-67) Catch plate kit - short Catch plate kit - long
12-76
D-04
ACCESSORIES Cat. No.
90 Fieldstone Court | Ph: 203.699.3300 |
Cheshire, CT 06410 Fx: 203.699.3108
www.edwards-signals.com
© Copyright 2004 Edwards
FIRE ALARM EQUIPMENT TECHNICAL INFORMATION
2 7/16" (62mm)
2 3/4" (70mm) 1 5/8" (67mm)
1 3/4" (44mm)
4 5/8" (117mm)
Catalog Number
Volts
Amps
1508-AQN5
24V AC* 24V DC 120V AC
0.015 0.015 0.015
*60Hz
D-04
90 Fieldstone Court | Ph: 203.699.3300 |
Cheshire, CT 06410 Fx: 203.699.3108
www.edwards-signals.com
12-77
© Copyright 2004 Edwards
FIRE ALARM EQUIPMENT
Electromagnetic Door Holder Flush Wall Mount, Multi-voltage 1509 Series FEATURES > Die cast metal construction > Powder epoxy aluminum finish > Mounting hardware included AGENCY APPROVALS > UL Listed
The 1509 Series electromagnetic door holder is a low profile, high quality device for use with single doors. The electromagnet assembly is designed for flush wall mounting and operates on 24V AC/DC or 120V AC. The electromagnet is designed to be flush wall mounted inside a standard single gang outlet box (not supplied). Field wiring connections are made to the electromagnet inside the electrical box. The
> FM Approved
catch plate assembly may be mounted to the door either by through-bolting or by using the concealed surface mounting plates.
SPECIFICATIONS > 25 lb (11.3kg) minimum holding force
Designed to be used on self-closing, swinging doors to automatically isolate an area when activated by fire alarm, smoke detection or sprinkler systems. Can also be operated by manual control — wherever the instant closing of doors is necessitated for safety or for convenience. Hospitals — for stairwell doors, room doors, long corridors, schools — exit door (closes all doors at once by pushbutton control); offices (instant privacy by pushing a button on your desk), nursing homes and public buildings. The 1509 Series door holder is an auxiliary device designed for wall mount applications that require holding single doors.
Description
1500-1 1500-2 1500-7 1500-12 CS2595-5 CS2598-5
1.5" Extension Kit (see pg. 12-67) 2" Extension Kit (see pg. 12-67) 7" Extension Kit (see pg. 12-67) 12" Extension Kit (see pg. 12-67) Catch plate kit - short Catch plate kit - long
12-78
D-04
ACCESSORIES Cat. No.
90 Fieldstone Court | Ph: 203.699.3300 |
Cheshire, CT 06410 Fx: 203.699.3108
www.edwards-signals.com
© Copyright 2004 Edwards
FIRE ALARM EQUIPMENT TECHNICAL INFORMATION
2 3/4" (70mm)
7/32" (5mm)
1 5/8" (67mm)
1 3/4" (44mm)
4 5/8" (117mm)
Catalog Number
Volts
Amps
1509-AQN5
24V AC* 24V DC 120V AC
0.015 0.015 0.015
*60Hz
D-04
90 Fieldstone Court | Ph: 203.699.3300 |
Cheshire, CT 06410 Fx: 203.699.3108
www.edwards-signals.com
12-79
© Copyright 2004 Edwards
PUSH BUTTONS & CONTACT DEVICES
Door Openers
150 & 151 Series The Catalog 150 and 151 mortise door openers are dependable long
Easy to install
service devices, providing the security and convenience of remote control door-lock operation. These units are flush mounted in place
Fits left and right hand doors
of the regular door strike plates. The door remains locked until the
Rugged, heavy duty construction
opener is electrically actuated by a remote contact device. For AC
For use in hollow metal jambs
models, use with a 592 Transformer. See page 11-2. For use in apartments, offices, banks, industrial buildings, schools, and institutions. Use in door interlocking and control systems with timed or manual operation.
1 5/8" (41mm) 1 9/16" (40mm)
1 5/8" (41mm)
1 1/4" (32mm)
1 1/4" (32mm)
3/32" (2mm)
4 1/8" (105mm)
4 7/8" (124mm)
1 17/32" (39mm)
3 3/8" (86mm)
Voltage
Amps
150-G1 150-G5
24V DC 24V AC
.20 .42
151-G1 151-G5
24V DC 24V AC
.20 .42
Brushed Chrome 90 Fieldstone Court | Ph: 203.699.3300 |
Cheshire, CT 06410 Fx: 203.699.3108
www.edwards-signals.com
10-25
© Copyright 2004 Edwards
Finish Painted brass faceplate with chrome nosing D-04
Cat. No.
4 3/8" (111mm)
PUSH BUTTONS & CONTACT DEVICES
Weatherproof Push Button 1785 FEATURES The 1785 weatherproof push button is constructed of a cast alumi-
> Surface mount
num rim with a composition diaphragm center. The unit is drilled and tapped for 1/2" (13mm) conduit and has a gray aluminum finish.
> Heavy die-cast construction
The push button is fitted with two side mounting lugs.
> Normally open contacts
For exterior use. Typical applications include use in push button
SPECIFICATIONS
panels, school signaling, machine start and stop, entrance pushes, and industrial signaling. Also used in the trucking industry and OEMs.
> Contact rating: 12V: 20 amps AC, 20 amps DC 24V: 20 amps AC, 10 amps DC 125V: 4 amps AC, 1 amp DC
3 29/32" (99mm)
3 1/32" (77mm)
2 15/16" (75mm)
2 3/16" (56mm)
90 Fieldstone Court | Ph: 203.699.3300 |
Cheshire, CT 06410 Fx: 203.699.3108
www.edwards-signals.com
10-15
© Copyright 2004 Edwards
D-04
3 3/32" (79mm)
PUSH BUTTONS & CONTACT DEVICES
Cat. No. 691 Cat. No. 692
Low Voltage Industrial Push Buttons Panel Mount
Cat. No. 694 Cat. No. 695
690 Series
FEATURES > AC or DC up to 50 volts
Low voltage, panel mount push buttons with three types of centers:
> Polished, anodized aluminum shell
recessed, flush, or protruding. Each button has a phosphor bronze contact spring with a long duration wiping action. The button back is constructed of Zytel 101 nylon.
> Snap fit or locknut type mounting Used for push button panels, on industrial and commercial ma-
SPECIFICATIONS
chines, and on OEM equipment. Use wherever an extra long life,
> Contact ratings:
high quality, low voltage push button is needed. May be used with
12V: 10 amps AC, 4 amps DC 24V: 10 amps AC, 2 amps DC
Cat. No. 147-1 mounting plate (page 10-11).
48V: 5 amps AC, 1 amp DC
5/16" (8mm)
> Mounting hole dia: 5/8" (16mm) > Normally open momentary contacts
1/8" (3mm)
3/4" (19mm)
3/4" (31mm)
1 7/32" (25mm)
10-10
D-04
Cat No. 694-B, 694-W, 695-B, and 695-W
90 Fieldstone Court | Ph: 203.699.3300 |
Cheshire, CT 06410 Fx: 203.699.3108
www.edwards-signals.com
1" (25mm)
Cat No. 690-W, 692-W, and 691-W
Cat. No.
Center Mounting
Center Type
Color
690-W 691-W 692-W 694-B 694-W 691-W 695-B 695-W
Snap fit Locknut Snap fit Snap fit Snap fit Locknut Locknut Locknut
Flush Flush Recessed Protruding Protruding Flush Protruding Protruding
White White White Black White White Black White © Copyright 2004 Edwards
PUSH BUTTONS & CONTACT DEVICES
Cat. No. 820
Cat. No. 821
High Voltage Push Buttons 820 & 821
FEATURES > Force fit (Cat. No. 820)
The Catalog 820 and 821 are rugged, fast break contact push but-
> Locknut mounting (Cat. No. 821)
tons that operate regardless of how pressure is released. The Catalog 821 is ideal for mounting on thin metal panels.
> Convenient screw terminals > Normally open contacts
Ideal for AC circuits where quick make is not a factor. The 821 may be used with 149-1 mounting plate. See page 10-11.
> Chrome plated, heavy duty shell with black center AGENCY APPROVALS > UL Recognized
2 1/32" (52mm) 5/16" (8mm)
15/32" (12mm)
SPECIFICATIONS > Rated at 250,000 operations at 1 amp, 125V
7/8" (22mm)
> Cat. 820 hole dia: 3/4" (19mm) > Cat. 821 hole dia: 7/8" (22mm) > Hole depth: 1 3/4" (44mm) > Contact rating: 12V: 15 amps AC 24V: 15 amps AC 48V: 10 amps AC 125V: 5 amps AC
10-12
D-04
250V: 5 amps AC
90 Fieldstone Court | Ph: 203.699.3300 |
Cheshire, CT 06410 Fx: 203.699.3108
www.edwards-signals.com
© Copyright 2004 Edwards
PUSH BUTTONS & CONTACT DEVICES
High Voltage Push Buttons 850 & 854 FEATURES Cat No. 850 & 854 push buttons are rugged, fast make and break
> Locknut mounting
contact push buttons that operate regardless of how pressure is applied or released. The buttons have insulated, protective sleeves
> Convenient screw terminals
and phosphor bronze, self cleaning contacts that withstand shock
> Cat. No. 850 - has normally open contacts
and vibration. Both push buttons panel mount in a 7/8" (22mm) hole using the supplied locknut. Also mounts in a 7/8" (20mm) hole that has been
> Cat. No. 854 - normally closed contacts
tapped with straight pipe threads. Required hole depth is 1 3/4" (44mm).
> Chrome plated, heavy duty shell with black center
Use for high voltage AC or DC circuits. May be used with 149-1 mounting plate. See page 10-11.
AGENCY APPROVALS > Cat. No. 850 UL Recognized SPECIFICATIONS
2" (51mm) 3/8" (10mm)
> Cat. no. 850 contact rating: 12V: 15 amps AC 24V: 15 amps AC 48V: 10 amps AC
1 1/8" (29mm)
125V: 5 amps AC 250V: 5 amps AC > Cat. no. 854 contact rating: 12V: 4 amps AC, 4 amps DC 24V: 4 amps AC, 4 amps DC 48V: 4 amps AC, 2 amps DC 125V: 2 amps AC, 1 amp DC 250V: 1 amp AC, 0.5 amps DC D-04
90 Fieldstone Court | Ph: 203.699.3300 |
Cheshire, CT 06410 Fx: 203.699.3108
www.edwards-signals.com
10-13
© Copyright 2004 Edwards
PUSH BUTTONS & CONTACT DEVICES
Door Opener
9E Brushed aluminum and lacquered faceplate and nosing
The Catalog Number 9E mortise door opener is a dependable long
Easy to install
control door-lock operation. This unit is flush mounted in place of
Fits left or right hand doors
the regular door strike plate. The door remains locked until the opener is electrically actuated by a contact device. For AC opera-
Rugged, heavy duty construction
tion, use with an 88-50, 596 or 598 Transformer. See pages 11-2
For use in wood jambs
and 11-5.
service device, providing the security and convenience of remote
For use in apartments, offices, banks, industrial buildings, schools, and institutions. Use in door interlocking and control systems with timed or manual operation.
1 1/4" (32mm)
5 7/8" (149mm)
Cat. No. 9E
1/8" (3mm)
D-04
10-32
90 Fieldstone Court | Ph: 203.699.3300 |
Cheshire, CT 06410 Fx: 203.699.3108
www.edwards-signals.com
15/16" (24mm)
1 3/8" (35mm) 5 3/8" (137mm)
3 21/32" (93mm)
Voltage
Amps
4 - 6V DC
1.3 - 2.7
—
1.4
12V tap of 88-50 or 596 598
8 - 12V AC 9G5
1 19/32" (41)
24V AC
Transformer
© Copyright 2004 Edwards
PUSH BUTTONS & CONTACT DEVICES
Low Voltage High Amperage Push Button 59 FEATURES Low voltage, high amperage push button designed for 3/4" (19mm) hole force fit. Flat white button center prevents accidental operation.
> Snap fit for 3/4" (19mm) hole > Normally open momentary contacts
Use wherever a low voltage, high amperage, economical push button is required.
1" (25mm)
25/32" (20mm)
Cat. No.
59
AC Volts
DC Amps
Amps
Rim
Finish
12
8.0
8.0
Polished
24
6.0
4.0
Nickel
48
3.0
2.0
Center
White
Hole Size
Hole Depth
3/4"
11/16"
(19mm)
(17mm)
D-04
90 Fieldstone Court | Ph: 203.699.3300 |
Cheshire, CT 06410 Fx: 203.699.3108
www.edwards-signals.com
10-7
© Copyright 2004 Edwards
PUSH BUTTONS & CONTACT DEVICES
Magnetic Switches
60 Series FEATURES > Normally open , normally closed or SPDT switches available
Edwards magnetic switches are designed to activate a variety of signaling devices. Normally open circuits close when the magnet
Cat. No. 63 magnetic switch is supplied complete with 66-W Insulating Spacer, 67W Terminal Cover, and mounting hardware
engages. SPDT switches are for open circuit systems or for central office operation. Normally closed circuits open when the magnet engages. For accessories, see Magnetic Switch Accessories, page 10-24. Used for commercial, industrial, and residential burglar alarm systems.
2 1/8" (54mm) 17/32" (13mm)
2 17/32" (64mm)
11/16" (17mm)
Cat. No.
Description
Color
Rating
60
Normally Open Switch
Gray
100 V, 50 mA
61
SPDT Switch
Gray
30 V, 250 mA
Normally Closed Switch
Gray
30 V, 250 mA
Normally Open switch
White
100 V, 50 mA
64
SPDT Switch
White
30 V, 250 mA
65
Normally Closed Switch
White
30 V, 250 mA 90 Fieldstone Court | Ph: 203.699.3300 |
Cheshire, CT 06410 Fx: 203.699.3108
www.edwards-signals.com
10-23
© Copyright 2004 Edwards
D-04
62 63
PUSH BUTTONS & CONTACT DEVICES
Door Opener
154 Series The Catalog 154 mortise type door opener is a dependable long service device, providing the security and convenience of remote con-
Painted brass faceplate and nosing
trol door-lock operation. This unit flush mounts in place of the regu-
Fits left and right hand doors
lar door strike plate and will withstand 35 lb (15.88 kg) nosing pressure. The door remains locked until the opener is electrically actu-
Easy installation
ated by a remote contact device. For AC models, use with either an
Rugged, heavy duty construction
88-50, 596, or 592 Transformer. See below table and Transformer
For use in wood jambs and gating systems
Catalog Pages 11-2 and 11-5. For use in apartments, offices, banks, industrial buildings, schools, and institutions. Use in door interlocking and control systems with timed or manual operation.
15/16" (24mm)
2 3/4" (70mm) 1 3/8" (35mm)
3/32" (2mm)
3" (76mm) 3 1.2" (89mm)
1 1/2" (38mm)
1 13/16" (46mm)
Cat. No.
Voltage
Amps
Transformer
154-AD
4 - 6V DC
1.3 - 2.7
—
8 - 16V AC
598
24V DC
.19
—
154-G5
24V AC
1.4
599 90 Fieldstone Court | Ph: 203.699.3300 |
Cheshire, CT 06410 Fx: 203.699.3108
www.edwards-signals.com
10-27
© Copyright 2004 Edwards
D-04
154-G1
PUSH BUTTONS & CONTACT DEVICES
Door Openers
177 & 178 Series Fits left and right hand doors
The Catalog 177 and 178 mortise type door openers are dependable
Easy installation
long service devices, providing the security and convenience of remote control door-lock operation. These units flush mount in place
Rugged, heavy duty construction
of the regular door strike plate and are ideal for narrow door stiles.
For use in wood and metal jambs
With the non-reverse acting units, the door remains locked until the opener is electrically actuated by a remote contact device. For reverse acting units, the door remains unlocked (with current off). When energized through a timer or manual switch, the unit keeps the door locked. For AC operation, use with either an 88-50, 596, or 592 Transformer. See below table and Transformer Catalog Pages 11-2 and 11-5. For use in apartments, offices, banks, industrial buildings, schools, and institutions. Use in door interlocking and control systems with timed or manual operation. Continuous Duty Operation The 177-RG5 and 178-RG5 are suitable for continuous duty operation. However, when operated from 24V AC, they must be con-
10-28
D-04
nected through the Catalog No. SR-1 Silencing Assembly. They may also be operated directly from 24V DC.
90 Fieldstone Court | Ph: 203.699.3300 |
Cheshire, CT 06410 Fx: 203.699.3108
www.edwards-signals.com
© Copyright 2004 Edwards
PUSH BUTTONS & CONTACT DEVICES
1 1/4" (32mm)
15/16" (24mm)
1/8" (3mm)
1 3/8" (35mm)
5 7/8" (149mm)
5 3/8" (137mm)
3 21/32" (93mm)
Cat. No.
Description
Voltage
Amps
Transformer
Finish
177-AF
Non-reverse
4 - 6V DC
1.3 - 2.7
—
Painted brass
acting
8 - 16V AC
12V tap of 88-50 or 596
faceplate
177-G5
Non-reverse acting
24V AC
1.4
24V tap of 88-50 or 599
with chrome
177-G1
Non-reverse acting
24V DC
.19
—
nosing
Reverse acting
24V DC
.19
177-RG5*
Continous duty 178-AF
24V tap of 88-50 or 592
Non-reverse
4 - 6V DC
acting
8 - 16V AC
88-50 or 596
faceplate
178-G5
Non-reverse acting
24V AC
1.4
24V tap of 88-50 or 599
and nosing
178-G1
Non-reverse acting
24V DC
.30
—
Reverse acting
24V DC
.19
178-RG5*
Continuous duty *SR-1
Silencing Assembly (rectifier)
1.3 - 2.7
— 12V tap of
Satin chrome
24V tap of 88-50 or 592
required with AC transformers on reverse action openers. 1 1/4" (32mm) square.
D-04
90 Fieldstone Court | Ph: 203.699.3300 |
Cheshire, CT 06410 Fx: 203.699.3108
www.edwards-signals.com
10-29
© Copyright 2004 Edwards
PUSH BUTTONS & CONTACT DEVICES
Door Openers
180 & 181 Series Fits left and right hand doors
The 180 and 181 Series mortise type door openers are dependable
Easy installation
long service devices, providing the security and convenience of remote control door-lock operation. These units are used with cylin-
Rugged, heavy duty construction
drical, bored type locksets and conform to ANSI specifications for
For use in wood and hollow metal jambs
steel door frames. The door remains locked until the opener is electrically actuated by a contact device. For AC operation, use with either an 88-50 or 596 Transformer. See pages 11-2 and 11-5. For use in apartments, offices, banks, industrial buildings, schools, and institutions. Use in door interlocking and control systems with timed or manual operation.
15/16" (24mm)
1 5/8" (41mm) 1 1/4" (32mm)
3/32" (2mm)
2 13/16" (71mm)
4 1/8" (105)
10-30
D-04
4 7/8" (124mm)
1 1/2" (38mm)
1 13/16" (46mm)
3 11/32" (85mm)
Cat. No.
Voltage
Amps
Transformer
Finish
180-AF
4 - 6V DC 8 - 16V AC 4 - 6V DC 8 - 16V AC
1.3 - 2.7
— 12V tap of 88-50 or 596 — 12V tap of 88-50 or 596
Painted brass faceplate with chrome nosing Satin chrome faceplate and nosing
181-AF 90 Fieldstone Court | Ph: 203.699.3300 |
Cheshire, CT 06410 Fx: 203.699.3108
www.edwards-signals.com
1.3 - 2.7
© Copyright 2004 Edwards
PUSH BUTTONS & CONTACT DEVICES
Door Opener
188 The Catalog Number 188 mortise type door opener is a dependable long service device, providing the security and convenience of remote control door-lock operation. The door remains locked until the opener is electrically actuated by a contact device. For AC operation, use with an 88-50, 596 or 598 Transformer. See Transformer Catalog Pages 11-2 and 11-5. For use in apartments, offices, banks, industrial buildings, schools,
Satin zinc faceplate and nosing Fits left and right hand doors Easy installation Rugged, heavy duty construction For use in wood and hollow aluminum jambs
and institutions. Use in door interlocking and control systems with timed or manual operation.
1 7/16" (37mm)
15/16" (24mm)
1 3/4" (44mm) 3/16" (5mm)
1 19/32" (41mm)
7 7/16" (189mm)
7 15/16" (202mm)
1 3/8" (35)
2 7/8" (73mm) 3 21/32" (93mm)
Cat. No.
Voltage
Amps
Transformer
188-AF
4 - 6V DC 8 - 16V AC
1.3 - 2.7
— 12V tap of 88-50 or 596 90 Fieldstone Court | Ph: 203.699.3300 |
Cheshire, CT 06410 Fx: 203.699.3108
www.edwards-signals.com
10-31
© Copyright 2004 Edwards
PUSH BUTTONS & CONTACT DEVICES
Door Light Switches
501A-G, 502A & 503A The Cat. No. 502A and 503A electric door switches are available as either normally open or normally closed units. The switch mounts using the mounting holes on 3 1/4" (83mm) centers.
All purpose electric door switch Normally open or normally closed switches available
closed (shipped normally closed). The switch mounts using the
501A-G may be wired either normally open or normally closed
mounting holes on 3" (76mm) centers.
Painted gold faceplate
The Cat. No. 501A-G may be wired either normally open or normally
Use for closet doors, dark rooms, and walk-in refrigerators. May be used on either sliding or hinged doors. Cat. No.
Description
501A-G***
May be wired NO or NC
502A*
Depress plunger to open circuit (normally closed)
503A**
Depress plunger to close circuit (normally open)
*For Replacement Switch, order P-047570-0919 **For Replacement Switch, order P-047570-0920 ***Order appropriate NC or NO switch as above two notes.
Face plate for 502A & 503A: 4" (102mm) H x 1 1/2" (38mm) W Face plate for 510A-G: 3 7/8" (98mm) H x 1 1/4" (32mm) W Switch: 2 15/16" (75mm) H x 1 11/32" (34mm) W x 1 3/4" (44mm) deep UL Component Recognized
D-04
90 Fieldstone Court | Ph: 203.699.3300 |
Cheshire, CT 06410 Fx: 203.699.3108
www.edwards-signals.com
10-33
© Copyright 2004 Edwards
PUSH BUTTONS & CONTACT DEVICES
Low Voltage Industrial Push Buttons Panel Mount 620 Series Low voltage, panel mount push buttons with large terminals. Available with an illuminated center for use in unlighted areas. Use for low voltage, low cost, industrial and commercial applications requiring long life. May be used with the Cat. No. 147-1 mounting plate (page 10-11) or 147-10 room annunciator mounting plate (page 14-8).
Finish Cat. No.
Volts
Rim
Center
620 621* 620-B 621-B*
8V AC or DC 24V AC or DC 48V AC or DC
Chrome
Ivory
Brass
Ivory
620-L 620-LB
6-16 V AC
Chrome Brass
Lighted Ivory Lighted Ivory
*500 unit bulk pack
Polished chrome or brass Insulated for mounting on metal cabinets Snap fit
Contact ratings: 8V: 2 amps AC, 2 amps DC 24V: .67 amps AC, .5 amps DC 48V: .3 amps AC, .3 amps DC Mounting hole dia: 5/8" (16mm) Mounting hole depth: 3/4" (19mm) Normally open momentary contacts
D-04
90 Fieldstone Court | Ph: 203.699.3300 |
Cheshire, CT 06410 Fx: 203.699.3108
www.edwards-signals.com
10-9
© Copyright 2004 Edwards
PUSH BUTTONS & CONTACT DEVICES
Deluxe Low Voltage Push Button Illuminated 656 FEATURES > Surface mounted
Polished housings with exclusive, patented piano-action design that requires only the slightest touch. This modern, slim design can be easily installed in minutes.
> Continuously illuminated > Piano type action
For home, apartment, office, and OEMs. Use wherever low voltage, economical remote control is required.
SPECIFICATIONS > Voltage: 6 to 16V AC > Normally open momentary contacts
Style
Housing
Finish Center
W
Dimensions H
D
656-B
Illuminated
Anodized Brass
White
15/16"
2 11/16"
9/16"
656-C
Rectangular
Anodized Aluminum
White
(24mm)
(68mm)
(14mm)
10-6
D-04
Cat. No.
90 Fieldstone Court | Ph: 203.699.3300 |
Cheshire, CT 06410 Fx: 203.699.3108
www.edwards-signals.com
© Copyright 2004 Edwards
PUSH BUTTONS & CONTACT DEVICES Cat. No. 600
Cat. No. 603
Low Voltage Push Button 600 & 603
FEATURES > Surface mounted, round > Solid brass construction
Attractive, traditional push button designed for long service. Use for home, apartment and office.
> Large accessible terminals SPECIFICATIONS > Voltage: up to 48V AC > Normally open momentary contacts
Finish
Dimensions Diameter Depth
Style
Housing
Center
600
Non-illuminated Round
Satin Brass
Black
2 5/16" (59mm)
7/8" (22mm)
603
Non-illuminated Round
Satin Brass
Black
1 3/4" (44mm)
11/16" (17mm)
10-2
D-04
Cat. No.
90 Fieldstone Court | Ph: 203.699.3300 |
Cheshire, CT 06410 Fx: 203.699.3108
www.edwards-signals.com
© Copyright 2004 Edwards
PUSH BUTTONS & CONTACT DEVICES
Low Voltage Push Buttons 602 & 605
Cat. No. 602
Cat. No. 602-L
Cat. No. 605
FEATURES Attractive, traditional push buttons in a single stamped plate. Designed for long service.
> Surface mounted
Use for homes, apartments and offices.
> Large accessible terminals
> Solid brass construction
> Dual buttons (602 Series) > Two name card holders (602 Series) > Three buttons (605 Series) > Three name card holders (605 Series) SPECIFICATIONS > Voltage: up to 48V AC (Cat. No. 602 and 605); up to 16V AC (Cat. No. 602-L) > Normally open momentary contacts
Cat. No.
Style
Housing
Finish Center
W
Dimensions H
D
602
Non-illuminated Rectangular
Satin Brass
Black
2" (51mm)
4 9/16" (116mm)
3/4" (19mm)
602-L
Illuminated Rectangular
Brass
White
1 7/16" (37mm)
5 1/4" (133mm)
5/8" (16mm)
605
Non-illuminated Rectangular
Satin Brass
Black
1 5/8" (41mm)
7" (178mm)
7/8" (22mm) D-04
90 Fieldstone Court | Ph: 203.699.3300 |
Cheshire, CT 06410 Fx: 203.699.3108
www.edwards-signals.com
10-3
© Copyright 2004 Edwards
PUSH BUTTONS & CONTACT DEVICES
Door Opener
152 Series Brass nosing
The Catalog 152 rim type door opener is a dependable long service
Easy surface installation
device, providing the security and convenience of remote control door-lock operation. The door remains locked until the opener is
Rugged, heavy duty construction
electrically actuated by a remote contact device. For AC models,
For surface mount installations
use with either a 598 Transformer. See below table and Transformer
Used in control systems and night latches
Catalog Page 11-2 For use in apartments, offices, banks, industrial buildings, schools, and institutions. Use in door interlocking and control systems with timed or manual operation.
1 3/16" (30mm)
3 11/32" (85mm) 7/32" (6mm)
2 1/8" (54mm)
2 3/4" (70mm)
1 7/16" (37mm) 3/4" (19mm)
Cat. No.
Voltage
Amps
Transformer
152-AE
4 - 6V DC
1.3 - 2.7
—
10-26
D-04
8 - 16V AC
90 Fieldstone Court | Ph: 203.699.3300 |
Cheshire, CT 06410 Fx: 203.699.3108
www.edwards-signals.com
590
152-G1
24V DC
.19
—
152-G5
24V AC
1.40
599 © Copyright 2004 Edwards
PUSH BUTTONS & CONTACT DEVICES
Multiple Contact Low Voltage - High Amperage Push Buttons 250 & 255 FEATURES > Fully insulated
The Catalog 250 is a low voltage, high amperage push button designed for simultaneous operation of two or three devices from one central point.
Multiple contacts
The Catalog 255 is a low voltage, high amperage push button designed for use where the simultaneous breaking of one circuit and the making of another is required. Use wherever a low voltage, high amperage, economical push button are required.
Cat. No. 255 Contact Arrangement
Cat. No 250 Contact Arrangement
AC Volts
DC Amps
Amps
Rim
Center
Hole Size
Hole Depth
250
12 24 48
6.0 4.0 2.0
2.0 1.0 0.5
Polished Nickel
Black
3/4" (19mm)
1 1/16" (27mm)
255
12 24 48
6.0 4.0 2.0
2.0 1.0 0.5
Polished Nickel
Black
3/4" (19mm)
1 1/16" (27mm)
10-8
D-04
Cat. No.
90 Fieldstone Court | Ph: 203.699.3300 |
Cheshire, CT 06410 Fx: 203.699.3108
www.edwards-signals.com
Finish
© Copyright 2004 Edwards
PUSH BUTTONS & CONTACT DEVICES Cat. No. 66
Cat. No. 67
Magnetic Switch Accessories
Cat. No. 68
66, 67 & 68
Magnetic switch insulating spacers, terminal covers, and mounting brackets
Edwards magnetic switches are designed to activate a variety of signaling devices. The following accessories can be used to functionally augment these switches. Edwards magnetic switches are used for commercial, industrial, and residential burglar alarm systems. Cat. No.
Color
Description
66-G 66-W*
Gray White
Insulating Spacer 1/8" (3mm) thick Interlocks into switch
67G 67W*
Gray White
Terminal Cover Protects terminals from tampering
68
Mounting Bracket For unusual or mortised applications
10-24
D-04
*Supplied with Cat. No. 63 Magnetic Switch
90 Fieldstone Court | Ph: 203.699.3300 |
Cheshire, CT 06410 Fx: 203.699.3108
www.edwards-signals.com
© Copyright 2004 Edwards
PUSH BUTTONS & CONTACT DEVICES
Rolling Ball Contactors
44, 45 & 46E FEATURES > Fast installation
The Catalog 44, 45 and 46E rolling ball contactors are insulated,
> Low voltage
rugged devices that operate from pressure in any direction. Installation requires no mortise.
SPECIFICATIONS For use on doors, windows, transoms, burglar alarms, and machin-
> Contact rating: 12V: 2 amps AC, 2 amps DC
ery. The Cat. No. 46E is ideal for applications where a momentary contact is desired such as door chime entry applications.
24V: 2 amps AC, 1 amp DC 48V: 1 amp AC, 0.5 amps DC Cat. No.
Description
Hole Diameter
Hole Depth
Push to open contacts
45
Push to close contacts
13/16"
1 1/8"
46E
Push to make then break and repeat on return
(21mm)
(29mm)
10-20
D-04
44
90 Fieldstone Court | Ph: 203.699.3300 |
Cheshire, CT 06410 Fx: 203.699.3108
www.edwards-signals.com
© Copyright 2004 Edwards
FIRE ALARM EQUIPMENT
Door Holder Extension Rods Adjustable Extensions 1500 Series FEATURES The Edwards 1500 Series Door Holder Extension Rods are for use where it is desired to hold doors open and where a standoff distance between the magnet assembly and the armature base is required. The extension kit can be used with Edwards 1504, 1505, 1508 and
> Two models > Adjustable from 6 3/8" to 12" > Employs existing mounting hardware
1509 series door holders.
> Supplied complete with all necessary allen wrenches
ORDERING INFORMATION Cat. No. Description 1500-1 1500-2 1500-7 1500-12
> Powder epoxy aluminum finish
1.5" Extension Kit 2.0" Extension Kit 5.25 to 7.5" Extension Kit 7.5" to 12" Extension Kit #10-32 x 1 1/2" (38mm) armature securing screw (supplied with door holder)
Adjustable 1500-12 shown
> Mounting hardware included SPECIFICATIONS > Cat. No. 1500-7 extension range: 6.37" (162mm) to 8" (203mm)* > Cat. No. 1500-12 extension range: 8.37" (213mm) to 12" (305mm)*
Armature base (supplied with door holder) (2) Spherical bushings (supplied)
*
Extension tube assembly #10-32 UNF x 1" (25mm) screw (supplied)
Extension ranges listed are from door to tip of catch plate using small armature. Consult each door holder for specific dimensions as each one mounts differently.
(2) Spherical bushings (supplied)
Knurled locking nut (2) Flat washers (supplied) #10-32 UNF nut (supplied) Catch plate (supplied with door holder)
Door to Wall Distance
Description
1504
3 7/16"
Employs long armature base.
1505
2 7/16"
Employs small armature base
1508
4 1/16"
Employs small armature base & surface mount back box
1509
1 27/32"
Employs small armature base 90 Fieldstone Court | Ph: 203.699.3300 |
Cheshire, CT 06410 Fx: 203.699.3108
www.edwards-signals.com
12-67
© Copyright 2004 Edwards
D-04
Cat. No.
PUSH BUTTONS & CONTACT DEVICES
Door Trip
236 FEATURES > Non insulated
The Catalog 236 door trip is a low voltage contact device for exter-
> Low voltage
nal mounting. The device makes and breaks as the door opens.
> Zinc plated
Signals door entry into stores, offices, etc.
SPECIFICATIONS > 48 Volts max.
10-22
D-04
> 1 1/4" (32mm) L x 1 5/16" (33mm) W x 3 1/4" (83mm) D
90 Fieldstone Court | Ph: 203.699.3300 |
Cheshire, CT 06410 Fx: 203.699.3108
www.edwards-signals.com
© Copyright 2004 Edwards
PUSH BUTTONS & CONTACT DEVICES
Pendant Push Button
71 FEATURES The Edwards 71 Push Button is a pendant type button. It is small,
> Gray Rim
yet easy to grasp, and is contained within a tough plastic case.
> Ivory center
For use in hospitals, institutions, and OEMs where a locking push
> Low voltage - up to 50 volts
button is not required.
SPECIFICATIONS > 8 volts, 2.0 amps; 24 volts, .67 amps > Dimensions: 1 1/2" (38mm) long x 1" (25mm) wide > Wire entrance diameter: 7/32" (6mm) > Normally open momentary contacts
D-04
90 Fieldstone Court | Ph: 203.699.3300 |
Cheshire, CT 06410 Fx: 203.699.3108
www.edwards-signals.com
10-17
© Copyright 2004 Edwards
PUSH BUTTONS & CONTACT DEVICES
Pendant Push Button
851 FEATURES > Quick make and break
The Edwards 851 Push Button is a high voltage pendant type button.
> Rugged construction > High voltage - up to 250 volts SPECIFICATIONS
Its shell is constructed out of shock resistant polypropylene. The pendant will fast make and break regardless of how pressure is applied. For use in hospitals, institutions, and OEMs where a fast make and
> Vibration resistant phosphor bronze, self cleaning contacts
break push button is required.
> 6" (152mm) No. 16 pigtail leads > Wire entrance diameter: 11/32" (9mm) > See Table
Type
Volts
AC Amps
DC Amps
Rim
851
Pendant
12
10.0
10.0
Gray
24
10.0
10.0
32
10.0
8.0
48
10.0
7.0
125
6.0
3.0
250
3.0
1.0
Finish Center Black
Dimensions Length Width 3 3/8"
1 9/16"
(86 mm)
(40 mm)
10-18
D-04
Cat. No.
90 Fieldstone Court | Ph: 203.699.3300 |
Cheshire, CT 06410 Fx: 203.699.3108
www.edwards-signals.com
© Copyright 2004 Edwards
PUSH BUTTONS & CONTACT DEVICES
Low Voltage Push Buttons
Cat. No. 632L
Cat. No. 630, 630L
Plastic Rust Proof Case, Illuminated & Non-Illuminated 630, 630L, 631 & 632L
FEATURES > Surface mounted
Patented piano-action design requires only the slightest touch. This modern, slim design can be easily installed in minutes.
> Piano type action > Plastic case - rust proof
For home, apartment, office, and OEMs. Use wherever low voltage, economical remote control is required.
SPECIFICATIONS > 630 & 631 non-illuminated push buttons voltage: up to 48V AC > 630L illuminated push button voltage: up to 16V AC > 632L illuminated push button voltage: up to 16V AC > Normally open momentary contacts
Style
Housing
Finish Center
W
Dimensions H
D
630
Non-illuminated
Brown
Ivory
7/8"
2 7/8"
5/8"
630L
Illuminated
Brown
Ivory
(22mm)
(73mm)
(16mm)
631
Non-illuminated
Ivory
Ivory
632L
Illuminated
Chrome
Ivory
7/8"
2 7/8"
5/8"
(22mm)
(73mm)
(16mm)
10-4
D-04
Cat. No.
90 Fieldstone Court | Ph: 203.699.3300 |
Cheshire, CT 06410 Fx: 203.699.3108
www.edwards-signals.com
© Copyright 2004 Edwards
PUSH BUTTONS & CONTACT DEVICES
Low Voltage Push Buttons Plastic Rust Proof Case 634, 635 & 636 FEATURES Exclusive, patented piano-action design that requires only the slightest touch. This modern, slim design can be easily installed in minutes.
> Surface mounted > Piano type action > Plastic case - rust proof
For home, apartment, office, and OEMs. Use wherever low voltage, economical remote control is required.
SPECIFICATIONS > Voltage: up to 48V AC > Normally open momentary contacts
Cat. No.
Style
Housing
Finish Center
W
Dimensions H
D
634
Non-illuminated
Brown
Ivory
3/4"
2 5/8"
3/4"
635
Rectangular
Ivory
Black
(19mm)
(67mm)
(19mm)
Ivory
Ivory
636
D-04
90 Fieldstone Court | Ph: 203.699.3300 |
Cheshire, CT 06410 Fx: 203.699.3108
www.edwards-signals.com
10-5
© Copyright 2004 Edwards