Protection Solutions

...applied excellence

Page Number

3

4

5

A.G .E x tr a WR SC olo ur OD En ha 1- O nc il D er isp ers an MC t 1-M ult iC lea BC n 2-B ric k CM Cl e 1- C an er em en t& Mo r ta SS 1 -S rC lea ter ne ilis r i n CG gS 1- C ol u he tio wi n ng Gu AG m Re 4- G mo el ve Gr r affi ti R e mo SL 1-S ve r ha do SL w 1 -S lift ha er do w LIf tin gP ou ltic e Nu -C r yl

Nu

-C r yl

A.G .

SE x tr a WR

Nu -C r yl

Nu -C r yl

WR

S

Protection Solutions

Product Selector

Nu -C r yl

How It Works.

6

7

8

8

9

9

10

10

11

11

11

P P P P

P P P P P P P P P

P P P P P P P P P

P P P P P P P P P

P P P P P P P P P

P P P P P P P P P

P P P P P P P P

P P P P P P P P P

P P P P P P P P P

P P P P P P P P P

P P P P P P P P P

P P

P

P

P

P

P

P

P

Substrates Concrete Brickwork Sandstone Limestone Cement

P P P P P

Terracotta

P P P P

Marble Granite Slate

The majority of building substrates are naturally porous, allowing water to penetrate, which can carry pollution/stains, propagate organic growth and create the damaging effects of frost and humidity. The unique properties of Nu-Cryl will alter the chemical structure of a porous building substrate, which in turn will provide oil and water repellent properties. The appearance of the substrate will not change and will remain moisture vapour permeable.

Properties Oil & Water Repellent

The Nu-Cryl range of environmentally friendly products will protect against water, oil, stains, pollution, graffiti, organic growth and chewing gum.

P

P

Graffiti Resistant Floor Protection Wall / Roof Protection Weather Resistant Stain Resistant

Nu-Cryl treatment is achieved by impregnating to full saturation. The Nu-Cryl solution will penetrate deep into the material’s pores rendering it water repellent.

P P P P P

Water Based Chewing Gum Repellent

P P P P

P P P P P P

P P P P P P

Floors Oil

P P P P P P P

P P P P P

Cement Greasy Stains General Stains Organic Growth Chewing Gum Remover

2

P

Graffiti Remover

...applied excellence

P P P P

P

P P

NU-CRYL® W.R.S.

P

A unique acrylic oil and water repellent treatment for concrete, stone and masonry walls and façades.

Oil and Water Repellent To BS 6477:1992 Prevents Frost Damage Prevents Organic Growth Does Not Affect Original Colour Stain And Dirt Resistant Solvent Free

NU-CRYL® WRS is suitable for porous walls and facades preventing frost damage and organic growth. NU-CRYL® WRS also protects against soiling and the effects of acid rain Surfaces treated with NU-CRYL® WRS will remain cleaner longer, therefore reducing maintenance costs.

Key Product Information

Untreated Limestone

COLOUR RANGE:

Clear, invisible.

PACK SIZE:

5 L & 25 L Drums.

DRYING TIME:

Touch dry:…..4 hours. Waterproof:..24-48 hours.

APPLICATION:

Impregnation to be applied by flood-coating method using low-pressure spray equipment of the knapsack type, or by brush/roller. Application should be to full saturation  commencing  at  the  bottom  and  work ing upwards.  Only  one  application  required  on  masonry, brickwork etc. Do not apply at temperatures below 5°C.

ENVIRONMENT:

REACH Compliant Water-Based Protective Solution.

Treated Limestone

3 ...applied excellence

NU-CRYL® WRS EXTRA

Protection Solutions

A unique acrylic oil and water repellent treatment for floors.

Oil and Water Repellent To BS 6477:1992 Prevents Frost Damage Prevents Organic Growth Does Not Affect Original Colour Stain And Dirt Resistant Solvent Free

NU-CRYL® WRS EXTRA is suitable for application to dense flooring substrates such as pedestrian areas, car parks and paving which is subjected to heavy wear and staining. NU-CRYL® WRS EXTRA will resist oil penetration and creates a non-stick surface that allows easy removal of chewing gum Paving treated with NU-CRYL® WRS EXTRA will remain cleaner longer with the regular cleaning process drastically reduced.

Key Product Information COLOUR RANGE:

Clear, invisible.

PACK SIZE:

5 L & 25 L Drums.

DRYING TIME:

Touch dry:…..2 hours. Waterproof:..24 hours.

APPLICATION:

Impregnation to be applied by flood-coating method using low-pressure spray equipment of the knapsack type, or by brush/roller. Application should be to full saturation commencing at the bottom and working upwards. Only one application required on masonry, brickwork etc. Do not apply at temperatures below 5°C.

ENVIRONMENT:

REACH Compliant Water-Based Protective Solution.

4

Untreated Block

Treated Block

...applied excellence

NU-CRYL® WRS Colour Enhancer

P

A unique water based acrylic copolymer oil and water repellent treatment that also enhances the natural colour of the substrate.

Oil and Water Repellent To BS 6477:1992 Prevents Frost Damage Prevents Organic Growth Enhances The Natural Colour Of The Substrate Stain And Dirt Resistant Solvent Free

NU-CRYL® WRS Colour Enhancer is suitable for application to walls and floors such as blockwork, concrete, natural stone, reconstructed stone & blockwork, granite, marble and terrazzo. Due to its excellent water repellent qualities, NU-CRYL® WRS Colour Enhancer will reduce the penetration of oil and water into the substrate as well as protecting from frost damage and organic growth. Stain and dirt resistant, NU-CRYL® WRS Colour Enhancer also enhances the natural colour of the substrate. Areas treated with NU-CRYL® WRS Colour Enhancer will remain cleaner longer with the regular cleaning process drastically reduced..

Key Product Information

COLOUR RANGE:

Clear, invisible.

PACK SIZE:

5 L & 25 L Drums.

DRYING TIME:

Touch dry:…..4 hours. Waterproof:..24-48 hours.

APPLICATION:



Impregnation  to  be  applied  by  flood-coating  method using low-pressure spray equipment of the knapsack type, or by brush/roller. The surface to be treated should be impregnated with 2 coats (wet on wet). Do not apply at temperatures below 5°C.

ENVIRONMENT:

REACH Compliant Water-Based Protective Solution.

5 ...applied excellence

NU-CRYL® AG

Protection Solutions

Economical clear anti graffiti protection for porous substrates such as Brick, Natural Stone, Reconstructed Stone, Block Work and Concrete.

Anti-Graffiti Protection Moisture Vapour Permeable Gives Up To 15 Years Protection No Colour Change Solvent Free

Nu-Cryl® AG is an acrylic-based impregnation coating for exterior surfaces. Applied by brush or airless spray it provides protection against solvents, chemicals, grease, oil, dirt and weather damage while still allowing the substrate to ‘breathe’. Nu-Cryl® AG will not noticeably change the surface appearance and graffiti can be effectively removed using a low pressure hot wash. No reapplication of Nu-Cryl® AG is necessary.

Key Product Information COLOUR RANGE:

Clear, invisible.

PACK SIZE:

5 L & 25 L Drums.

DRYING TIME:

Touch dry:…..4 hours. Waterproof:..24-48 hours.

APPLICATION:

Impregnation  to  be  applied  by  flood-coating  method using low-pressure spray equipment of the knapsack type,  or  by  brush/roller.  Application  should  be  to  full saturation  commencing  at  the  bottom  and  work ing upwards.  Only  one  application  required  on  masonr y, brickwork etc. Do not apply at temperatures below 5°C.

ENVIRONMENT:

REACH Compliant Water-Based Protective Solution.

6

...applied excellence

NU-CRYL® AG EXTRA

P

Economical clear anti graffiti protection for dense substrates such as Granite, Marble, Terrazzo and Polished Concrete.

Anti-Graffiti Protection Moisture Vapour Permeable Gives up to 15 years Protection No Colour Change Solvent Free

Nu- Cr yl®  AG  Ex tra  is  an  acr ylic-based impregnation coating for exterior surfaces. Applied by brush or air-less spray it provides protection against solvents, chemicals, grease, oil, dirt and weather damage while still allowing the substrate to ‘breathe’. Nu-Cryl® AG Extra will not noticeably change the surface appearance and graffiti can be effectively removed using a low pressure hot wash. No reapplication of Nu-Cryl® AG Extra is necessary.

Key Product Information

COLOUR RANGE:

Clear, invisible.

PACK SIZE:

5 L & 25 L Drums.

DRYING TIME:

Touch dry:…..2 hours. Waterproof:..24 hours.

APPLICATION:

Application  by  low  pressure  spray  or  by  brush/roller taking  care  to  avoid  any  sagging.  Application  on  vertical surfaces should be to full saturation commencing at the bottom and working upwards. Only one application is required Do not apply at temperatures below 5°C..

ENVIRONMENT:

REACH Compliant Water-Based Protective Solution.

7 ...applied excellence

Protection Solutions

OD1 Oil Dispersant

OD1 Oil Dispersant is safer and ecologically more acceptable than many other degreasers available and is suitable for use on most surfaces such as concrete, brick, tarmac, metals, plastics and painted surfaces.

Application: A safe, ecological, water soluble oil dispersant and emulsifier.

Can be used as supplied for heavy contamination or diluted with up to 5 parts water for light use. Use a low pressure spray directly on the spillage and allow to dwell for 10-20 minutes. Hose or pressure wash off, leaving surface clean.

Solvent Free Non-Caustic Non-Flammable Safe On Tarmac And Asphalt

MC1 Multi Clean Removes staining and grime from brick, concrete and other hard surfaces.

Before

After

MC1 is a water soluble degreaser formulated to remove grease staining and general grime from paved surfaces and other hard surfaces. Can also be used for cleaning prefabricated buildings and paintwork.

Application: Can be used as supplied for heavy contamination or diluted with 4 parts water when used through hot water pressure washers. Allow to dwell for up to 5 minutes and pressure wash with clean water. For washing down paintwork dilute with 40 parts water depending on the staining to be removed, for extra effectiveness use hot water.

May Be Diluted With Water For Light Stains Degreases Paving

8

Before

...applied ...appliedexcellence excellence

After

BC2 - THICK BRICK CLEANER A strong acidic liquid specifically formulated to remove heavy grime deposits from sandstone and brick.

BC2 is a thixotropic brick and stone cleaner developed for the removal of heavy staining on aged substrates.

P

Application: Apply BC2 undiluted with a bristle brush to the affected area. And allow to dwell for 15-20 minutes. Pressure wash off leaving surfaces clean. It may be necessary to degrease the area prior to cleaning with MC1-Multi Clean.

Will Remove Heavy Grime Deposits From Sandstone And Brick Will Cling To Vertical Surfaces Allowing Longer Dwell Time

Before CM1 - CEMENT AND MORTAR CLEANER An acidic liquid formulated specifically for removing cement and mortar stains from walls and floors.

After

CM1 is an acidic cleaner developed for the removal of Cement an Mortar spillages and staining, particularly on new build projects. Suitable for use on hard landscaping and paving.

Application: Pre-wet surfaces to be treated prior to application and apply CM1 undiluted with a bristle brush to the affected area. Allow to dwell for 15 minutes. Pressure wash off leaving surface clean.

Ideal For New Build Projects May Be Diluted With Water

9 ...applied excellence

Protection Solutions

SS1 - STERILISING SOLUTION

SS1 is a ready to use, water based biocide that will destroy mould, fungi and organic growth. SS1 is an environmentally friendly waterborne formulation. The use of SS1 will reduce regrowth and is suitable for application to roofs,walls and paving.

Application: A specially prepared, ready to use wash for use before applying protective treatments.

Remove heavy deposits of mould or algae by power washing. Spray-apply SS1 to all areas to kill any remaining spores. Leave for 24 hours prior to applying any protective treatment.

Kills Spores Of Mould And Algae Reduces Re-Growth Environmentally Friendly

Growth On Pebble-Dash CG1 – CHEWING GUM REMOVER A specially formulated non-aqueous blend of citrus oils which combine to provide a very high performance chemical for the removal of chewing gum and other stubborn stains.

Growth On Brick

CG1 is completely non-toxic, with a pleasant odour making it extremely safe for use internally as well as externally.

Application: Spray directly onto the chewing gum and allow to dwell for up to 5 minutes. Power wash with hot water to remove the gum spots followed by complete rinsing of the surface to create a uniform appearance.

Non-Toxic Low Odour Environmentally Friendly

10 ...applied excellence

AG4 - GEL GRAFFITI REMOVER A specially formulated blend of solvents and Will Cling To Vertical biodegradable detergents Surfaces Allowing A Longer Dwell Time developed to remove graffiti from porous or Effective On Porous Surfaces extensively vandalised surfaces where a longer ‘dwell time’ is required. Will effectively remove aerosol graffiti, permanent marker pen, crayon and lipstick from more porous surfaces such as brickwork and concrete. The extended dwell-time allows effective penetration of porous surfaces and restricts evaporation of solvents which cause unpleasant odours.

Application:

A specially formulated alkaline cleaner for the removal of stubborn graffiti shadows from brickwork, stone and concrete.

No Colour Change Effective On Porous Surfaces Removes Old Marker Pen Shadows Removes Old Aerosol Shadows

Will  effectively  remove unsightly shadows remaining after graffiti removal. Will also remove soiling and staining from brickwork.

After

Apply SL1 undiluted with a bristle brush to the affected area and allow to dwell for up to 2 minutes. Remove by pressure washing to leave surfaces clean.

SL1 Being Applied

A specially formulated poultice cleaner for the removal of stubborn graffiti shadows from brickwork, stone and concrete.

P

Effective On Porous Surfaces Removes Old Marker Pen Shadows

Will effectively remove permanent marker, crayon & lipstick from porous surfaces such as brickwork & concrete. The extended dwell-time allows effective penetration of the surface and restricts evaporation of solvents, which causes unpleasant odours

Application:

Application:

Apply AG4 Gel liberally to the graffiti using a bristle brush. Allow to dwell for 2-3 minutes. Remove by power washing with hot water.

AG4 Applied

SL1 - SHADOW LIFTER

SL2 - SHADOW LIFTING POULTICE

After

...applied excellence

Apply the mixed SL2 Poultice to the affected area at a thickness of 5-10 mm. Cover with plastic and tape the edges. Allow the poultice to dry for about 24 hours. Remove the plastic and poultice from the stain and thoroughly rinse with hot water under low pressure.

Before

After

11

Professional Application Pioneers in the field of specialist protective coatings, HYDRON’S track record of success is a direct result of listening to our customers and satisfying their requirements from our industry leading range of products and services. As an ISO 9001 approved company, we supply to many major companies and service all types of industry as well as local and central government throughout the U.K. Our reputation has been built on our ability to provide solutions, our depth of technical expertise and the strength of our commitment to customer service.

Approved Applicators:

The HYDRON range of coating systems are applied by approved applicators, giving the specifier the benefit of proven products applied professionally.

How To Order Ordering Is Simple...

With offices in both the UK and Ireland, no minimum order value and next day delivery from stock for all orders placed before noon, we make the process of ordering these market leading protective coatings and cleaning solutions as easy as possible.

UK Office: Call Your Order To: 01902 450950 Or Fax Your Order To: 01902 451050 Or Post Your Order To: Hydron Protective Coatings Ltd, Unit 7 Phoenix Road, Wednesfield, Wolverhampton WV11 3PX, England. Or Email Your Order To: [email protected]

Ireland Office:

Certificate No. 20494

Call Your Order To: 046 956 7516 Or Fax Your Order To: 046 956 7542 Or Post Your Order To: Hydron Protective Coatings (Ireland) Ltd, 2 An Gleib, Ballivor, Co. Meath, Ireland Or Email Your Order To: [email protected]

www.hydronpc.co.uk