Program

Osaka International Convention Center (Grand Cube Osaka) November 13-18, 2011 Sponsored by

Collaborated with

Gas Turbine Society of Japan

Supported by the Commemorative Organization for the Japan World Exposition ('70)

http://www.gtsj.org/

INTERNATIONAL GAS TURBINE CONGRESS 2011 OSAKA NOVEMBER 13-18, 2011 Sponsoring Society Gas Turbine Society of Japan (GTSJ)

Collaborating Societies ASME International Gas Turbine Institute (ASME/IGTI) European Turbine Network (ETN) The Institute of Mechanical Engineers (IMechE) The Japan Society for Aeronautical and Space Sciences (JSASS) The Japan Society of Mechanical Engineers (JSME) Korean Fluid Machinery Association (KFMA) The Korean Society of Mechanical Engineers (KSME) Société Française des Mécaniciens (SFM) Verein Deutscher Ingenieure (VDI) Italian Union of Thermal-Fluid Dynamics (UIT)

Cooperative Societies The Visualization Society of Japan (VSJ) Thermal and Nuclear Power Engineering Society (TENPES) Japan Society for the Promotion of Machine Industry (JSPMI) International Electric Research Exchange (IERE) Society of Automotive Engineers of Japan (JSAE) Turbomachinery Society of Japan (TSJ) Engineering Research Association for Supersonic Transport Propulsion System (ESPR) The Federation of Electric Power Companies of Japan (FEPC) The Center for Promotion of Natural Gas (CPNG) The Japan Institute of Energy (JIE) Japan Society of Energy and Resources (JSER) The Japan Gas Association (JGA) The Japan Institute of Metals (JIM) The Society of Japanese Aerospace Companies (SJAC) Japanese Aero Engines Corporation (JAEC) The Society of Materials Science, Japan (JSMS) The Ceramic Society of Japan (CerSJ) The Japan Electrical Manufacturers' Association (JEMA) Heat Transfer Society of Japan (HTSJ) Japan Internal Combustion Engine Federation (JICEF) Combustion Society of Japan (CSJ)

Institute for Liquid Atomization and Spray Systems (ILASS-Japan) Japan Fine Ceramics Association (JFCA) Japan Institution of Marine Engineering (JIME) Japan Land Engine Manufacturers Association (LEMA)

International Advisory Committee Prof. Tony Arts (Belgium) Prof. Frans A. E. Breugelmans (Belgium) Prof. Rene Van den Braembussche (Belgium) Prof. Chen Naixing (China) Prof. Huang Weiguang (China) Prof. Sun Xiaofeng (China) Dr. Jean-Jacques Thibert (France) Prof. Dieter E. Bohn (Germany) Prof. Joerg R. Seume (Germany) Dr. Sane Shrikrishna Kashinath (India) Prof. Aristide F. Massardo (Italy) Prof. Shin-Hyoung Kang (Korea) Dr. Dae-Sung Lee (Korea) Prof. Mikhail Ja Ivanov (Russia) Prof. Reza S. Abhari (Switzerland) Prof. John D. Denton (UK) Prof. Ann P. Dowling (UK) Prof. Dilip R. Ballal (USA) Prof. Edward M. Greitzer (USA) Dr. Chunill Hah (USA) Prof. Wing F. Ng (USA) Prof. Terrence W. Simon (USA) Dr. David C. Wisler (USA)

Financial Supporters Commemorative Organization for the Japan World Exposition '70 Federation of Electric Power Companies The Japan Gas Association Osaka Convention & Tourism Bureau

CONTENTS

1. WHOLE CONGRESS TIME TABLE ································································································ 4 2. GENERAL INFORMATION ··············································································································· 5 3. REGISTRATION & FEES··················································································································· 5 4. PLENARY SESSIONS, FORUMS & PANELS ··············································································· 6 5. SEMINAR & EXHIBITIONS ··············································································································· 7 6. SOCIAL PROGRAMS & PLANT TOURS ······················································································· 8 7. CONGRESS OFFICE ························································································································· 9 8. SESSION PROGRAM ······················································································································ 10 9. ORGANIZING COMMITTEE ··········································································································· 30 10. EXECUTIVE COMMITTEE··············································································································· 31 11. INFORMATION OF GAS TURBINE SOCIETY OF JAPAN (GTSJ) ·········································· 33 12. ACCESS TO & FLOOR GUIDE OF CONGRESS VENUE ························································· 36

MESSAGE FROM GTSJ PRESIDENT

On behalf of the Gas Turbine Society of Japan, GTSJ, I am very pleased to welcome all the participants of the International Gas Turbine Congress 2011 Osaka. The GTSJ has been providing up-to-date information on all aspects of gas turbine technologies through various conferences for 40 years. One of the most important activities among them has been to host the International Gas Turbine Congress every four years with the support of collaborating societies all around the world. The International Gas Turbine Congress, IGTC, was first held in 1971 in Tokyo. Since then, a series of nine congresses has been held in Japan. A large number of people from academia, industry, and government have participated in these congresses from various areas of the world and presented the results of their research and experiences. The IGTC’11 is the tenth international congress organized by GTSJ and continues the tradition of the previous nine congresses held in Japan. Gas turbine and related technologies have greatly advanced in the last decade thanks to improvements in the efficiency, reliability, and cleanness of exhaust emissions. The research and development activities of advanced gas turbine systems are underway for the next generation. In addition, especially after the Tohoku-Kanto Earthquake and Tsunami Disaster, the gas turbine has attracted much attention as a feasible platform to be used in highly efficient emergency electric generators. Under these circumstances, I believe that this international congress is a timely and beneficial event, allowing participating researchers and engineers from various areas of the world to exchange information on the latest research and technical achievements. Finally, my sincere gratitude is extended to the collaborating and cooperative societies, the members of the International Advisory Committee, the supporting foundations, and the corporate members of the Gas Turbine Society of Japan for their contributions in making this congress possible. Special thanks are also directed to the members of the Organizing Committee and the Executive Committee for their great effort in the preparation of the congress.

Yasukata Tsutsui President Gas Turbine Society of Japan

2

MESSAGE FROM IGTC '11 OSAKA CHAIRS

On behalf of the organizing committee and executive committee of IGTC’11, we would like to extend our warmest welcome to all participants of IGTC’11 Osaka. We are extremely delighted to host IGTC for the first time in Osaka. Osaka is Japan’s second largest economic area in close proximity to other major urban and tourist centers including Kyoto, Nara and Kobe. IGTC’11 is the 10th anniversary congress since the first IGTC was held by JSME supported by the Gas Turbine Division of ASME in 1971. We celebrate this honorable occasion of IGTC’11 with a special invited lecture by Professor Eisuke Outa and a special exhibition of past IGTCs including memorial photographs organized by Professor Osamu Kawaguchi. In response to our announcement by the 1st circular, 251 extended abstracts were received from more than 20 countries. Even though the Higashi Nippon disaster occurred on 11 March, 2011, 192 papers were selected for presentation at IGTC’11. Two invited lectures and seven keynote speeches are to be delivered by world leading experts. Two panel sessions on “Trends in Aero Engine and CO2 Reduction”, and two forums on “Aero Engine and Asian Energy and Environmental Strategy” are also scheduled. We are indebted to all reviewers for reviewing the draft papers, to the members of International Advisory Committee, Organizing and Executive Committee for their greatest efforts in preparing and operating IGTC’11 successfully. We also wish to acknowledge the generous support from collaborating societies, sponsors and exhibitors. Without these contributions, fruitful success of IGTC'11 would not be achieved. It will be our great pleasure that IGTC’11 provides a valuable social gathering for better understanding gas turbine technologies, exchanging updated information and making further progress, and growing our friendship. We would be very happy to see all participants enjoy IGTC’11 and the beautiful autumn in Kansai.

Haruo Yoshiki

Ken-ichiro Takeishi

Chairman Organizing Committee of IGTC '11 Osaka

Chairman Executive Committee of IGTC '11 Osaka

3

1. WHOLE CONGRESS TIME TABLE Nov.13 (Sun)

Nov.14 (Mon)

Nov.15 (Tue)

Nov.16 (Wed)

Nov.17 (Thu)

Nov.18 (Fri)

Morning

Afternoon Evening Registration (Foyer, 12F) : 17:00-20:30 Welcome Reception (Conf. Hall, 12F) : 18:30-20:30 Morning Afternoon Evening Registration (Foyer, 12F) 9:00-18:00 Exhibition 11:30-17:00 (Rooms #1001, 1002, and 1003, 10F) Student Exhibition & Retrospective Exhibition of IGTC 12:00-17:00 (Room #1010, 10F) Opening Address Lunch Break 13:10-14:30 9:30-9:40 (Conf. Hall, 12F) Special Talk 2 Gas Turbine Open 14:30-16:00 (Conf. Hall, 12F) Plenary Talk 1 Seminar Technical Sessions 9:40-10:10 (Conf. Hall, 12F) (in Japanese) 14:30-16:00 (7 Rooms, 10&12F) 17:00-18:30 (Conf. Award of Honorary Membership Hall, 12F) Break 16:00-16:20 10:10-10:20 (Conf. Hall, 12F) Plenary Invited Lecture 1 Technical Sessions 10:20-11:20 (Conf. Hall, 12F) 16:20-17:50 (7 Rooms, 10&12F) Special Talk 1 11:40-13:10 (Conf. Hall, 12F) Technical Sessions 11:40-13:10 (6 Rooms, 10&12F) Morning Afternoon Evening Registration (Foyer, 12F) 9:00-18:00 Exhibition 10:00-17:00 (Rooms #1001, 1002, and 1003, 10F) Student Exhibition & Retrospective Exhibition of IGTC 10:00-17:00 (Room #1010, 10F) Lunch Break12:50-14:30 Technical Sessions Plenary Invited Lecture 2 9:30-11:00 (8 Rooms, 10&12F) 14:30-15:30 (Conf. Hall, 12F) Break 11:00-11:20 Break 15:30-15:50 Technical Sessions Panel Discussion 1 11:20-12:50 (8 Rooms, 10&12F) 15:50-17:50 (Conf. Hall, 12F) Morning Afternoon Evening Registration (Foyer, 12F) 9:00-18:00 Exhibition 10:00-17:00 (Rooms #1001, 1002, and 1003, 10F) Student Exhibition & Retrospective Exhibition of IGTC 10:00-17:00 (Room #1010, 10F) Lunch Break 12:50-14:30 Banquet Technical Sessions Rihga Royal Hotel Plenary Invited Lecture 3 9:30-11:00 (8 Rooms, 10&12F) 19:00-21:30 (Room 14:30-15:30 (Conf. Hall, 12F) Sanraku, 2F) Break 11:00-11:20 Break 15:30-15:50 Forum 1 Technical Sessions 15:50-17:00 (Conf. Hall, 12F) 11:20-12:50 (11:05-12:50) (8 Rooms, Plenary Talk 2 10&12F) 17:00-17:50 (Conf. Hall, 12F) Morning Afternoon Evening Registration (Foyer, 12F) 9:00-15:00 Exhibition 10:00-14:00 (Rooms #1001, 1002, and 1003, 10F) Student Exhibition & Retrospective Exhibition of IGTC 10:00-14:00 (Room #1010, 10F) Closing Address Lunch Break 12:50-14:00 Technical Sessions 17:50-18:30 9:30-11:00 (9:30-11:15) (8 Rooms, Forum 2 (Conf. Hall, 12F) 10&12F) 14:00-15:30 (Conf. Hall, 12F) Break 11:00-11:20 Break 15:30-15:50 Technical Sessions Panel Discussion 2 11:20-12:50 (7 Rooms, 10&12F) 15:50-17:50 (Conf. Hall, 12F) Plant Tours

4

2. GENERAL INFORMATION

for tourism will be available at the Congress Registration Desk, as well as the bureau's web site (http://www.osaka-info.jp/jp/) in English, Chinese, Thai, Korean, and Japanese.

2.1 Language The official language of the Congress is English. 2.2 Registration Desk Congress Registration Desk will be open at the times and place indicated below: Nov. 13 (Sun) 17:00-20:30 Nov. 14 (Mon) 9:00-18:00 Nov. 15 (Tue) 9:00-18:00 Nov. 16 (Wed) 9:00-18:00 Nov. 17 (Thu) 9:00-15:00 in the foyer of 12F.

2.6 Cloakroom A cloakroom will be open in the foyer of 12F during the following periods. Coats and luggage can be stored there free of charge. Nov. 13 (Sun) 16:00-21:00 Nov. 14 (Mon) 8:00-19:00 Nov. 15 (Tue) 9:00-18:30 Nov. 16 (Wed) 9:00-18:30 Nov. 17 (Thu) 9:00-19:00

2.3 Information for Speakers and Chairpersons Speaker's Meeting There will be a short meeting among the chairpersons and speakers just before each session. The speakers and chairpersons are requested to arrive at the session room 10 minutes before the session start. Timing of Presentations Each general paper will be allotted 30 minutes, including 10 minutes for introduction and question-and-answer period. A keynote paper will be allotted 45 minutes. Speakers' Practice A room (#1201, 12F) will be reserved for speakers who wish to check their slides and to practice. A PC projector, power supply, and Internet connection will be available. Audio Visual Equipment Each session room is equipped with a Windows laptop PC with Microsoft Office (including Microsoft PowerPoint), a PC projector, a screen, a laser pointer, and microphones. Speakers are advised to check their presentation materials in advance of presentations.

2.7 Official Agents The official agents of IGTC'11 are e-side, inc. (http://en.e-side.co.jp/) in charge of collecting papers, administering registration and bank transfers, and JTB TOKYO Business World Tokyo Corp. (http://www.jtbbwt.com/) in charge of credit card settlement and providing the online registration service, "AMARYS". For further information on registration and payment, please contact the Yokohama Branch of e-side, inc. (c/o Ms. Kana Ohta and Mr. Scott Macdonald). E-mail: igtc2011-office＠e-side.co.jp Tel: 81-45-534-3881 Fax: 81-45-534-3882

3. REGISTRATION AND FEES 3.1 Registration Fees All participants are required to register and pay registration fees according to the categories in Table 1. The registration fee includes a badge to access all sessions of the congress, the welcome reception, coffee breaks, and electronic proceedings (USB flash memory). Those who wish to participate in the congress banquet on Wednesday and a plant tour on Friday are requested to register and pay additional fees for participation. The additional fees are 10,000 JPY for banquet, and 7,000 JPY for a tour, respectively. These additional fees are shown in Table 2. Pre-registration before October 1, 2011 is requested for at least one speaker for each technical paper. Papers will be excluded from the proceedings and the final program unless the executive committee of IGTC '11 confirms the speaker's pre-registration.

2.4 Congress Venue The congress venue is Osaka International Convention Center (Grand Cube Osaka, GCO) located in Nakanoshima business district of Osaka city. For more information on the venue, please visit GCO's web site at http://www.gco.co.jp/en/. 2.5 Information for Tourism Information for tourism is available at the web site of Osaka Convention & Tourism Bureau, and other organizations. Brochures, maps and other materials 5

Table 1 Registration Fee Category

Pre-registration before Nov. 1, 2011

Speaker

55,000 JPY

Regular-registration after Nov. 2, 2011, and on site Pre-registration is compulsory

55,000 JPY 65,000 JPY 15,000 JPY

60,000 JPY 70,000 JPY 15,000 JPY

Member

*1

Non-member

Student

A printout of confirmation e-mail or fax will be requested to be presented at the desk.

4. PLENARY TALK, PLENARY INVITED LECTURES, SPECIAL TALKS, PANEL DISCUSSIONS, & FORUMS 4.1 Plenary Talk Conference Hall PLENARY TALK 1 November 14 (Mon) 9:40-10:10 Recollection on the Progress of IGTC over 40 years Prof. Eisuke Outa (Waseda University, Japan) Chair: Osamu Kawaguchi (Professor emeritus, Keio University, Japan) PLENARY TALK 2 November 16 (Wed) 17:05-17:50 Europe's Framework Programme for Research in the Field of Aeronautics and Air Transport Dr. Remy Denos (EU Commission, Belgium) Chair: Toshinori Watanabe (The University of Tokyo, Japan)

*1 Members of GTSJ, the collaborating or the cooperative societies listed on the end leaf.

Table 2 Additional Fee*2

*2

Item Banquet Plant Tour

Price

10,000 JPY/person 7,000 JPY/person

Participants of the banquet and the plant tours must be registered participants or accompanying persons.

3.2 Online Registration (in advance) Online registration is accepted at the Congress Registration Desk (online) at https://amarys-jtb.jp/igtc2011/ . Payment should be made by bank transfer or a major credit card (VISA, AMEX, Diners, or JCB). The bank details for bank transfer are:

4.2 Plenary Invited Lectures Conference Hall PLENARY INVITED LECTURE 1 November 14 (Mon) 10:20-11:20 NASA's Future Propulsion Systems Research and Development Mr. Ramon Lugo (Director of NASA Glenn Research Center, USA) Chair: Chunill Hah (NASA Glenn Research Center, USA) PLENARY INVITED LECTURE 2 November 15 (Tue) 14:30-15:30 Advanced Aeroengine Technologies to Reduce the Effect of Aviation on the Environment Prof. Richard J. Parker (Director of Research and Technology, Rolls-Royce Group, UK) Chair: David Koyama (Rolls-Royce Japan, Japan) PLENARY INVITED LECTURE 3 November 16 (Wed) 14:30-15:30 How to Develop Sustainable Low-Carbon Society (LCS) for Japan and Asian Countries? -Model Simulation and RoadmapDr. Junichi Fujino (National Institute for Environmental Studies, Japan) Chair: Toshihiko Nakata (Tohoku University, Japan)

Bank Name: Sumitomo Mitsui Banking Corporation, Branch Name : Akasaka Branch (Branch number : 825), Swift Code: SMBCJPJT, Account Type: Savings Account, Account No.: 8895874, Account Name: IGTC11 Registration Desk (Hidekazu Arai, President).

If paying by credit card, the congress agent for the online payment, "JTB Internet Settlement (AMARYS)" (in English) or "JTB インターネット決 済(アマリス)" (in Japanese) will appear on your credit card statement. Online registration will be accepted until 17:00 of November 4, 2011 (JST). 3.3 On-site Registration On-site registration will be accepted at the Congress Registration Desk shown in subsection 1.2. Major credit cards or cash (JPY) will be accepted for payment. 3.4 Congress Kit All participants including those who have registered in advance are requested to come to the desk to receive a congress bag containing a badge, a copy of program and an electronic proceedings on USB flash memory with ISBN number. 6

Term Strategy) Panelist: Dr. Kenneth L. Suder (NASA Glenn Research Center, USA), Dr. Remy Denos (European Commission, Belgium), Dr. Toshio Nishizawa (Japan Aerospace Exploration Agency, Japan) Chair: Toshinori Watanabe (The University of Tokyo, Japan) Organizer: Toshinori Watanabe (The University of Tokyo, Japan), Atsushi Makino, Keiichi Okai (Japan Aerospace Exploration Agency, Japan), Kuniyuki Imanari (IHI, Japan) Forum 2 November 17 (Thu) 14:00-15:30 Asian Energy and Environmental Strategy Panelist: Dr. Feng Lin (Chinese Academy of Sciences, China), Mr. Xueyou Wen (Harbin Marine Boiler & Turbine Research Institute, China), Prof. Tong Seop Kim (Inha University, Korea), Dr. Atsushi Kurosawa (The Institute of Applied Energy, Japan) Chair: Seung Jin Song (Seoul National University, Korea), Weiguang Huang (Chinese Academy of Sciences, China) Organizer: Toshinori Watanabe (The University of Tokyo, Japan)

4.3 Special Talks Conference Hall Special Talk 1 November 14 (Mon) 11:40-13:10 Learn to Think Like an Expert Dr. David C. Wisler (GE Aviation, retired, USA) Chair: Yoshinaka Tsukasa (Pratt & Whitney Canada, retired, Canada), Watanabe Toshinori (The University of Tokyo, Japan) Special Talk 2 November 14 (Mon) 14:30-16:00 My Hope in Young Gas Turbine Professionals -Approach to Technical OpportunitiesMr. Tsukasa Yoshinaka (Pratt & Whiteney Canada, retired, Canada) Chair : David C. Wisler (GE Aviation, retired, USA) Yukio Otsuki (Kawasaki Heavy Industries, Japan) 4,4 Panel Discussions Conference Hall Panel Discussion 1 November 15 (Tue) 15:50-17:50 Trends in Aero Engine Technology Associated with Environmental Issues and CO2 Reduction (Shortand Mid-Term Strategy) Panelist: Mr. Shigehiko Yamaguchi (JCAB, MLITI, Japan), Prof. Richard J. Parker (Rolls-Royce, UK) , Dr. Alan Epstein (Pratt & Whitney, USA), Dr. Hidekazu Kodama (IHI, Japan), Mr. Tohru Saito (JAL, Japan), Mr. Toshihiko Noguchi (ANA, Japan), Observer: Mr. Takayuki Kanai (METI, Japan) Chair: Toshinori Watanabe (The University of Tokyo, Japan) Organizer: Toshinori Watanabe (The University of Tokyo, Japan), Atsushi Makino, Keiichi Okai (Japan Aerospace Exploration Agency, Japan), Kuniyuki Imanari (IHI, Japan) Panel Discussion 2 November 17 (Thu) 15:50-17:50 CO2 Reduction in Power Plants Panelist: Prof. Reza S. Abhari (ETH, Switzerland), Dr. Koji Toyama (Kansai Electric Power, Japan), Mr. Kensuke Suzuki (Toshiba, Japan) Organizer: Toshihiko Nakata (Tohoku University, Japan)

5. SEMINAR & EXHIBITIONS 5.1 Gas Turbine Open Seminar Lectures for students and ordinary citizens on the basics and latest issues related to gas turbine (jet engine and industrial) will be given by three prominent speakers, Mr. Tatsukasa Yoshinaka (Pratt & Whitney Canada, retired, Canada), Professor Toshinori Watanabe (The University of Tokyo, Japan), and Dr. Hisao Futamura (Japan Aerospace Exploration Agency, Japan). Neither expertise nor registration will be required to participate only in this seminar. The seminar will start 17:00 on November 14, Monday in the Conference Hall (12F). The facilitator of the seminar is Osamu Nozaki (Japan Aerospace Exploration Agency). 5.2 Retrospective (Memorial) Exhibition of IGTC Photographs, documents related to this series of conferences over 40 years will be exhibited in Room #1011 (10F). The exhibition is organized by mainly Osamu Kawaguchi (Professor emeritus, Keio University, Japan).

4,5 Forums Conference Hall Forum 1 November 16 (Wed) 15:50-17:00 Trends in Aero Engine Technology Associated with Environmental Issues and CO2 Reduction (Long

5.3 Student Exhibition Exhibitions by university and technical college 7

       

students will be made in Room #1011 (10F). The exhibition is organized by mainly Nobuhiko Yamasaki (Kyushu University, Japan). The participating groups are:  Turbomachinery Laboratory (Kawata Lab.), Osaka Institute of Technology  Jet Propulsion Laboratory (Watanabe and Himeno Lab.), The University of Tokyo  Thermal Science and Engineering Area (Takeishi and Komiyama Lab.), Osaka University  Fluid Engineering and Turbomachinery Laboratory (Ohta Lab.), Waseda University  Computational Fluid Dynamics Laboratory (Yamamoto Lab.), Tokyo University of Science  Combustion and Propulsion Laboratory (Yuasa Lab.), Tokyo Metropolitan University  Reacting Fluid Laboratory (Hayashi Lab.) and Fluid Engineering Laboratory (Tsujita Lab.), Hosei University  Aerospace Propulsion Laboratory (Yamasaki Lab.), Kyushu University  Fluids Engineering Research Group (Tsujimoto Lab.), Osaka University  Heat Transfer and Fluid Engineering Laboratory (Honami Lab.), Tokyo University of Science  Aerospace Research Division (Funazaki Lab.), Iwate University  Fluids Engineering Science Laboratory (Furukawa Lab.), Kyushu University  Mathematical Modeling and Co mputation Laboratory (Yamamoto and Sasao Lab.), Tohoku University  Thermal Engineering Laboratory (Yoshida, Iwai and Saito Lab.), Kyoto University.

                          

5.4 (Corporate) Exhibition An exhibition related to gas turbines, turbochargers and their accessories, parts, materials, instrumentation, application software, etc. will be held concurrently in the exhibition hall (Room #1001-1003, 10F). A brochure in both English and Japanese including a floor guide and a list of the exhibitors will be handed to visitors at the entrance of the hall. Neither admission fee nor registration will be required to have access to this part. The exhibitors are:  Aikoku Alpha Corporation  Atsuita Press Industry Co., Ltd.  B&B - AGEMA  Bruel & Kjaer Japan

Concurrent Nippon Corporation Daiichi System Engineering Co., Ltd. Eagle Industry Co., Ltd. Everloy Shoji Co., Ltd. Fuji Techno Industries Corporation General Electric International Inc. Hitachi, Ltd. Honda R&D Co., Ltd. Aircraft Engine R&D Center IHI Castings Co., Ltd. IHI Corporation Japan Aerospace Exploration Agency Japan Air Tec Co., Ltd. Japanese Aero Engines Corporation Kawasaki Heavy Industries, Ltd. Maruwa Electronic Incorporated Maruyama Excell Co., Ltd. Mitsubishi Heavy Industries Precision Casting Co., Ltd. Mitsubishi Heavy Industries, Ltd. National Institute of Advanced Industrial Science and Technology Nippon Muki Co., Ltd. Ohmura Manufacturing Co., Ltd. Ohte Giken, Inc. Reaction Design Japan KK Rotadata Ltd. Sankyo International Corporation Shinkawa Electric Co., Ltd. Shinwa Corporation Softinway, Inc. Spraying Systems Co., Japan Toshiba Corporation Tyco Thermal Controls Corporate Uemura Giken Co., Ltd. Vinas Co., Ltd. Wood Group Woodward Governor (Japan), Ltd.

6. SOCIAL EVENTS & TOURS 6.1 Welcome Reception All participants and accompanying persons registered will be invited to attend the Welcome Reception to be held in the Conference Hall (12F) from 18:30 to 20:30 on November 13, Sunday (no additional fee required). 6.2 Banquet The banquet will be held in Room Sanraku, Rihga Royal Hotel (2F) from 19:00 to 21:30, November 16, Wednesday. Those who wish to participate in the 8

banquet are required to register and pay an additional fee of 10,000 JPY/person. The banquet will be in a buffet style, and a variety of vegetarian dishes will be available. Japanese traditional instrumental music by koto will be performed during the banquet. 6.3 Plant Tours The following two plant tours are planned on November 18, Friday. Those who wish to participate in these are required to register and pay an additional fee of 7,000 JPY/person in advance. Please note that all the applicants to the tours will be screened by the hosting companies, and that not all participants will be accepted. Documents describing details of these tours will be handed to the applicants registered at the Registration Desk (Foyer, 12F). (1) Tour 1 (LNG Gas Plant & Power Station) This tour will be headed for Senboku LNG Power Plant of Osaka Gas and Sakaiko Power Station of Kansai Electric Power. The tour bus will depart from the congress venue (Grand Cube Osaka) on 8:30. (2) Tour 2 (Gas Turbine Manufacturing Plants) This tour will be headed for two major gas turbine manufacturing plants, Takasago Machinery Works of Mitsubishi Heavy Industries and Akashi and Seishin Works of Kawasaki Heavy Industries. The tour bus will depart from the congress venue (Grand Cube Osaka) on 8:00.

7. CONGRESS OFFICE The Congress Office will be set in the GTSJ Secretariat on 12F (next to Room #1203).

9

8. SESSION PROGRAM 8.1 Session Program at a Glance Nov.14 (Mon.) 9:30-9:40 9:40-10:10 10:10-10:20 10:20-11:20 11:20-11:40

11:40-13:10 13:10-14:30

14:30-16:00

16:00-16:20 16:20-17:50 17:00-18:30

Conference Hall (12F) Opening Address Plenary Talk 1 Recollection on the Progress of IGTC over 40 Years Prof. Eisuke Outa (Waseda University, Japan) Chair: Osamu Kawaguchi (Keio University, Japan) Award of Honorary Membership Plenary Invited Lecture 1 NASA's Future Propulsion Systems Research and Development Mr. Ramon Lugo (Director of NASA Glenn Research Center, USA) Chair: Chunill Hah (NASA Glenn Research Center, USA) Break Room Room Room Room Room Room Conference Hall (12F) 1202 1009 1008 1007 1006 1005 Special Talk 1 : Learn to Think like an Expert AD(7) HT(1) HT(10) CB(6) SV(1) MT(1) Dr. David C. Wisler (GE Aviation, USA) Lunch Break Special Talk 2: My Hopes in Young Gas Turbine Professionals AD(8) HT(2) HT(11) CB(7) SV(2) MT(2) Mr. Tsukasa Yoshinaka (Pratt & Whitney Canada, Canada) Break AD(9) HT(3) HT(12) CB(8) SV(3) MT(3) Gas Turbine Open Seminar (in Japanese)

Room 1004 -

PF(1)

PF(2)

Nov.15 (Tue.) Room Room Room Room Room 1008 1007 1006 1005 1004 AD(1) HT(13) SV(4) ST(1) MT(4) PF(3) Break AD(2) AD(11) HT(5) CB(1) CB(9) ST(2) MT(5) PF(4) Lunch Break Conference Hall (12F) Plenary Invited Lecture 2 Advanced Aeroengine Technologies to Reduce the Effect of Aviation on the Environment Prof. Richard J. Parker (Director of Research and Technology, Rolls-Royce Group, UK) Chair: David Koyama (Rolls-Royce Japan, Japan) Break Panel Discussion 1 Trends in Aero Engine Technology Associated with Environmental Issues and CO2 Reduction (Short- and Mid-Term Strategy) Organizer : Toshinori Watanabe (The University of Tokyo, Japan), Atsushi Makino, Keiichi Okai (Japan Aerospace Exploration Agency, Japan), Kuniyuki Imanari (IHI, Japan) Panelist : Mr. Shigehiko Yamaguchi (JCAB, MLTI. Japan), Prof. Richard J. Parker (Rolls-Royce, UK), Dr. Alan Epstein (Pratt & Whitney, USA), Dr. Hidekazu Kodama (IHI, Japan), Mr. Tohru Saito (JAL, Japan), Mr. Toshihiko Noguchi (ANA, Japan) Observer: Mr. Takayuki Kanai (METI, Japan) Chair: Toshinori Watanabe (The University of Tokyo, Japan)

Conference Hall (12F) 9:30-11:00 11:00-11:20 11:20-12:50 12:50-14:30

14:30-15:30 15:30-15:50

15:50-17:50

Room 1202 AD(10)

Room 1009 HT(4)

10

Nov.16 (Wed.) Conference Hall (12F) 9:30-11:00

Room 1202 AD(12)

Room 1009 HT(6)

Room 1008 CB(2) Break

Room 1007 CB(10)

AD(13)

HT(7)

CB(3)

DO(1)

11:00-11:20 11:20-12:50 (11:05-12:50)

AD(3)

Room 1006 ST(3)

ST(4)

Room 1005 DOTT(1)

DOTT(2)

Room 1004 PF(5)

PF(6)

Lunch Break Conference Hall (12F) Plenary Invited Lecture 3 How to Develop Sustainable Low-Carbon Society (LCS) for Japan and Asian Countries? -Model Simulation and RoadmapDr. Junichi Fujino (National Institute for Environmental Studies, Japan) Chair: Toshihiko Nakata (Tohoku University, Japan) Break Forum 1 Trends in Aero Engine Technology Associated with Environmental Issues and CO2 Reduction (Long Term Strategy) Organizer : Toshinori Watanabe (The University of Tokyo, Japan), Atsushi Makino, Keiichi Okai (Japan Aerospace Exploration Agency, Japan), Kuniyuki Imanari (IHI, Japan) Speaker : Dr. Kenneth L. Suder (NASA, USA), Dr. Remy Denos (EU Commission, Belgium), Dr. Toshio Nishizawa (Japan Aerospace Exploration Agency, Japan) Chair: Toshinori Watanabe (The University of Tokyo, Japan) Plenary Talk 2 Europe's Framework Programme for Research in the Field of Aeronautics and Air Transport Dr. Remy Denos (EU Commission, Belgium) Chair: Toshinori Watanabe (The University of Tokyo, Japan)

12:50-14:30

14:30-15:30 15:30-15:50

15:50-17:00

17:00-17:50

Nov.17 (Thu.)

9:30-11:00 (9:30-11:15)

Conference Hall (12F)

Room 1202

AD(5)

AD(14)

Room 1009 HT(8)

11:00-11:20 11:20-12:50 12:50-14:00

14:00-15:30

15:30-15:50 15:50-17:50 17:50-18:30

Room 1008

Room 1007

Room 1006

Room 1005

CB(4)

DO(2)

ST(5)

DOTT(3)

DO(3)

ST(6)

DOTT(4)

Room 1004 PF(7)

Break AD(6)

PF(8)

HT(9)

CB(5)

-

Lunch Break Conference Hall (12F) Forum 2 Asian Energy and Environmental Strategy Organizer: Toshinori Watanabe (The University of Tokyo, Japan) Speaker: Dr. Feng Lin (Chinese Academy of Sciences, China), Mr. Xueyou Wen (Harbin Marine Boiler & Turbine Research Institute, China), Prof. Tong Seop Kim (Inha University, Korea), Dr. Atsushi Kurosawa (The Institute of Applied Energy, Japan) Chair: Seung Jin Song (Seoul National University, Korea), Weiguang Huang (Chinese Academy of Sciences, China) Break Panel Discussion 2 CO2 Reduction in Power Plants Organizer : Toshihiko Nakata (Tohoku University, Japan) Panelist : Prof. Reza S. Abhari (ETH, Switzerland), Dr. Koji Toyama (Kansai Electric Power, Japan), Mr. Kensuke Suzuki (Toshiba, Japan) Closing Address

11

8.2 Technical Sessions Nov. 14, Mon 11:40-13:10 Conference Hall

Room 1202

Room 1009

Room 1008

[Special Talk 1]

AD(7) Aerodynamics of Turbine I

HT(1) Conjugate Heat Transfer

HT(10) Heat Transfer with Impinging Jet I

Chair: Tsukasa Yoshinaka (Pratt & Whitney Canada, retired, Canada) Toshinori Watanabe (The University of Tokyo, Japan)

Chair: Yuan Xin (Tsinghua University, China) Eisaku Ito (Mitsubishi Heavy Industries, Japan)

Chair: Mikael Wilson (University of Bath, UK) Ken-ichi Funazaki (Iwate University, Japan)

Chair: Yonghui Xie (Xi'an Jiaotong University, China) Chiyuki Nakamata (IHI, Japan)

Learn to Think like an Expert Dr. David C. Wisler (GE Aviation, retired, USA)

#020 Hot Streak Shaping and Migration in an Axial Turbine Kai Regina (ETH Zurich, Switzerland) Altug M. Basol Philipp Jenny Anestis I. Kalfas Reza S. Abhari

#086 Conjugate Calculation of a Film Cooled Blade for Improvement of the Leading Edge Cooling Configuration Norbert Moritz (B&B-AGEMA, Germany) Karsten Kusterer Dieter Bohn (RWTH Aachen University, Germany) Takao Sugimoto (Kawasaki Heavy Industries, Japan) Ryozo Tanaka Tomoki Taniguchi

#228 Effect of Injection Parameters on Jet Array Impingement Heat Transfer Yoshisaburo Yamane (Tokyo University of Science, Japan) Yoshiyasu Ichikawa Makoto Yamamoto Shinji Honami

#194 Numerical Investigation of the Interaction between Probe, Flow and Blading in an Axial-Turbine Florian Herbst (Leibniz University Hannover, Germany) Sven Bluemel Efstratios Fakiolas (Aristotle University of Thessaloniki, Greece) Joerg R. Seume (Leibniz University Hannover, Germany)

#164 Conjugate Heat Transfer Simulation of an Inlet Guide Vane with Closed-Loop Steam Cooling Chao Zhang (Chinese Academy of Sciences, China) Jie Hu Jian-jun Liu

#162 Validation and Development of Models for Optimum Wheel Flow Inlet Angles of Small Size Radial Turbines Jan-F. Suhrmann (Techincal University of Berlin, Germany) Dieter Peitsch Marc Gugau (BorgWarner Turbo Systems Engineering, Germany) Tom Heuer

#204 Conjugate Heat Transfer Simulation of Cooled Turbine Vanes Using Unstructured-Mesh CFD Solver Daisuke Sasaki (Tohoku University, Japan) Tetsuya Yoshiara Shunpei Yasuda Kazuhiro Nakahashi

12

#257 Heat Transfer Characteristics of Some Multiple Impinging Jets with Swirling Flow Effect Chayut Nuntadusit (Prince of Songkla University,Thailand) Makatar Wae-Hayee #258 Heat Transfer Enhancement of an Impinging Jet in Crossflow by Elongated Round Orifice M. Wae-hayee (Prince of Songkla University, Thailand) P. Tekasakul C. Nuntadusit

Room 1006

Room 1005

CB(6) Development of Combustor I

Room 1007

SV(1) Structure, Vibration and Noise I

MT(1) Gas Turbine Failure and Life Assessment I

Chair: L. S. Yanovskiy (Central Institute of Aviation Motors, Russia) Nobuyuki Kawahara (Okayama University, Japan)

Chair: Ricardo F. Martinez-Botas (Imperial College of Science, Technology and Medicine, UK) Shigehiko Kaneko (The University of Tokyo, Japan)

Chair: Motoki Sakaguchi (Nagaoka University of Technology, Japan) Hiroyuki Kagawa (Kansai Electric Power, Japan)

#068 Investigations of Staged Fuel Nozzles for Aeroengine by Single-Sector and Multi-Sector Combustor Tests Takeshi Yamamoto (Japan Aerospace Exploration Agency. Japan) Kazuo Shimodaira Yoji Kurosawa Seiji Yoshida

[Keynote Lecture-2] New Directions in Turbomachinery Aero-Acoustics Zoltan S. Spakovszky (Massachusetts Institute of Technology, USA)

#199 Characteristics of Crack Initiation of Inconel Alloy 706 Gas Turbine Rotor Daisuke Kobayashi (Chubu Electric Power, Japan) Akihiko Ito Masamichi Miyabe Yukio Kagiya Kazutoshi Ishibashi (Toshiba, Japan) Daizo Saito Yomei Yoshioka

#179 Design and Verification test result of Air Cooled Combustor for Mitsubishi G Class Gas Turbine Keizo Tsukagoshi (Mitsubishi Heavy Industries, Japan) Katsunori Tanaka Koichi Nishida Shinji Akamatsu Keijiro Saitoh Hiroaki Kishida Kenji Sato #182 Single-Digit NOx DLE Combustion System for KAWASAKI M7A-03 Green Gas Turbine Kiyoshi Matsumoto ( Kawasaki Heavy Industries, Japan) Takeo Oda Satoshi Toyota Masahiro Ogata Yasuhiro Kinoshita

#047 Environmental Noise Impact Assessment Method of Cogeneration System Ken Kaneuchi (Osaka Gas, Japan) Koichi Nishimura

#185 Effects of Stress and Oxidation for Creep and Creep-Fatigue Behaviors of Ni-base Superalloy Inconel Alloy 706 Yomei Yoshioka (Toshiba, Japan) Kazutoshi Ishibashi Daizo Saito Rie Sumiya Shoko Ito Daisuke Kobayashi (Chubu Electric Power, Japan) Akihiro Ito Masamichi Miyabe Yukio Kagiya #075 Evaluation on Relaxation Behaviors of Compressive Residual Stress of Peened Inconel Alloy 706 Test Specimens after Thermal and Stress Aging Treatments Rie Sumiya (Toshiba, Japan) Toshiyuki Tazawa Yomei Yoshioka Kazutoshi Ishibashi Daisuke Kobayashi (Chubu Electric Power, Japan) Akihiko Ito Masamichi Miyabe Yukio Kagiya

13

Room 1004

Nov. 14, Mon 14:30-16:00 Conference Hall

Room 1202

Room 1009

Room 1008

[Special Talk 2]

AD(8) Aerodynamics of Turbine II

HT(2) Numerical Simulation of Heat Transfer I

HT(11) Heat Transfer with Impinging Jet II

Chair: David C. Wisler (GE Aviation, retired, USA) Yukio Otsuki (Kawasaki Heavy Industries, Japan)

Chair: Dieter Peitsch (Technical University of Berlin, Germany) Susumu Teramoto (The University of Tokyo, Japan)

Chair: Norbert Moritz (B&B – AGEMA, Germany) Takashi Yamane (Japan Aerospace Exploration Agency, Japan)

Chair: Kenichiro Takeishi (Osaka University, Japan)

My Hopes in Young Gas Turbine Professionals -Approach to Technical OpportunitiesMr. Tsukasa .Yoshinaka (Pratt & Whitney Canada, retired, Canada)

#007 Integrated Environment for Gas Turbine Design Leonid Moroz (SoftInWay, USA) Yuriy Govorushchenco Petr Pagur Kirill Grebennik Wolfgang Kutrieb (Kutrieb Research, USA) Mike Kutrieb

#198 Benchmark Simulation of RANS CFD for Heat Transfer Evaluation on the VKI LS89 Blade Toshihiko Takahashi (Central Research Institute of Electric Power Industry, Japan) Tony Arts (von Karman Institute for Fluid Dynamics, Belgium) Tom Verstraete Johan Prinsier

#151 Heat Transfer to Impinging Jets in a Narrow Channel Mark W. Miller (University of Central Florida, USA) Roberto Claretti Mark Ricklick Jayanta S. Kapat

#063 Studies on the Flow Fields around Two Types of LPT Cascade with Different Loading Designs: Midspan and Secondary Loss Ken-ichi Funazaki (Iwate University, Japan) Kazuki Okamura Yasukuni Sato Masaaki Hamabe (IHI, Japan)

#017 Computations of Flow and Heat Transfer in a Rotor-Stator System with Externally-Induced Ingestion Le Wang (University of Bath, UK) Michael Wilson

#076 Improving Performance of a High Work Turbine Using Non-Axisymmetric Endwall Ichiro Miyoshi (Hitachi, Japan) Shin’ichi Higuchi

14

#003 Effect of Roughened Element on Target Surface and Cooling Hole Shape on Impingement Cooling Effectiveness Chiyuki Nakamata (IHI, Japan) Yoji Okita Takashi Yamane (Japan Aerospace Exploration Agency, Japan) Yoshitaka Fukuyama Toyoaki Yoshida

Room 1006

Room 1005

CB(7) Development of Combustor II

Room 1007

SV(2) Structure, Vibration and Noise II

MT(2) Gas Turbine Failure and Life Assessment II

PF(1) Performance I

Chair: Yanovskiy L.S. (Central Institute of Aviation Motors, Russia) Keiichi Okai (Japan Aerospace Exploration Agency, Japan)

Chair: Zoltan S Spakovszky (Massachusetts Institute of Technology, USA) Nobuhiko Yamasaki (Kyushu University, Japan)

Chair: Koji Take (Kawasaki Heavy Industries, Japan) Daisuke Kobayashi (Chubu Electric Power, Japan)

Chair: Tong Seop Kim (Inha University, Korea) Susumu Nakano (Hitachi, Japan)

#217 Development of Combustor with Exhaust Gas Recirculation System for 1700°C Class Gas Turbine Satoshi Takiguchi (Mitsubishi Heavy Industries, Japan) Keijiro Saitoh Eisaku Ito Keizo Tsukagoshi Koichi Nishida Katsunori Tanaka

#207 Research on Mixing Devices for Jet Noise Reduction Tatsuya Ishii (Aviation Program Group, Japan Aerospace Exploration Agency, Japan) Hideshi Oinuma Kenichiro Nagai Takeshi Tagashira (Jet Engine Technology Research Center, Japan Aerospace Exploration Agency, Japan)

#069 Examination of Estimation Method of Damage in Gas Turbine Blade Root Fixings Hirotaka Kurashima (Kawasaki Heavy Industries, Japan) Hirokazu Matsuda Hideki Hiramatsu Kazuhiko Tanimura

#010 A Robust and Multi-Objective Trade-off Design Method for Secondary Air System Shinichiro Ihara (IHI, Japan) Hirotaka Kure Hatsuo Mori

#236 Development and Preliminary Performance Evaluation of a Multi Swirl Airblast Burner with Multi Fuel-Film Annuli Takashi Suzuki (Waseda University, Japan) Yasutaro Yoshiura (Hosei University, Japan) Tomoki Ishikawa Kazuaki Matsuura (Japan Aerospace Exploration Agency, Japan) Jun Iino (Advanced Science & Intelligence Research Institute, Japan) Hideshi Yamada (Japan Aerospace Exploration Agency, Japan) Shigeru Hayashi (Hosei University, Japan) Katsuhiro Yamamoto (Waseda University, Japan) #184 Development of a Lean Staged Combustor in ECO Engine Project Ryusuke Matsuyama (Kawasaki Heavy Industries, Japan) Masayoshi Kobayashi Hideki Ogata Atsushi Horikawa Yasuhiro Kinoshita

#065 Study on Vibration Response Reduction of Bladed Disk by Use of Asymmetric Vane Spacing (Study on Response Reduction of Mistuned Bladed Disk) Yasutomo Kaneko (Ryukoku University, Japan) Masaki Ohta Kazushi Mori (Mitsubishi Heavy Industries, Japan) Hiroharu Ohyama

#042 First Stage Segmented Nozzle Failure Analysis Saeed Asadikouhanjani (Mapna Turbine Blade Engineering & Manufacturing, Iran) Reza Ghorbani

Room 1004

#087 Study on Turboprop Engine Performance Behaviors Considering Inlet and Exhaust Duct Pressure Loss in Altitude Test Chamber Condition Changduk Kong (Chosun University, Korea) Keonwoo Kim Semyung Lim Jaekyoug Yoo Kyeongho Choi (Atics Engineering, Korea) #107 Fault Diagnostics of A Turboprop Engine Using Inverse Performance Model and Artificial Intelligent Method Changduk Kong (Chosun University, Korea) Semyung Lim Keonwoo Kim

#079 Experimental and Numerical Investigation of Supersonic Jet Noise Reduction with Microjet Injection Ryuichi Okada (The University of Tokyo, Japan) Toshinori Watanabe Seiji Uzawa Takehiro Himeno Tsutomu Oishi (IHI, Japan)

15

Nov. 14, Mon 16:20-17:50 Conference Hall

Room 1202

Room 1009

Room 1008

AD(9) Aerodynamics of Turbine III

HT(3) Numerical Simulation of Heat Transfer II

HT(12) Internal Cooling I

Chair: Leonid Moroz (SoftIn Way, USA) Ken-ichi Funazaki (Iwate University, Japan)

Chair: Karsten Kusterer (B&B -AGEMA, Germany) Toshihiko Takahashi (Central Research Institute of Electric Power Industry, Japan)

Chair: Kwang-Yong Kim (Inha University, Korea) Hisato Tagawa (Hitachi, Japan)

#125 Development of an Unsteady Multi-Species Numerical Method for Internal Compressible Flows in the Turbine Zhong-Nan Wang (Tsinghua University, China) Zhi-Rong Lin Xin Yuan

#016 Numerical Investigations of the Effect of Vortex Structures on Local Heat Transfer in a Large Scale Turbine Cascade Rebecca Reviol (University Kaiserslautern, Germany) Roman Franze Martin Böhle Alexander Wiedermann (MAN Diesel & Turbo SE, Germany) Kenichiro Takeishi (Osaka University, Japan)

#216 Investigation on Heat Transfer Characteristics of a Cooling Channel with Densely Arranged Rib Turbulator Katsuhiko Ishida (Kawasaki Heavy Industries, Japan) Tomoko Hagari Kenichiro Takeishi (Osaka University, Japan) Yutaka Oda

#113 Optimization of Secondary Flow Loss Reduction of High Loaded Gas Turbine Cascade Tohru Tamagawa (Osaka Institute of Technology, Japan) Kenji Fujii (Mitsubishi Heavy Industries, Japan) Masao Ohto (Osaka Institute of Technology, Japan) Yutaka Kawata #117 Effects of Rotor Tip Leakage on the Unsteady Flow Fields of Stator Blade in a One and Half Turbine Stage Jun Li (Xi'an Jiaotong University, China) Xin Yan Liming Song Shaojun Li Zhenping Feng

#060 A High-Order LES Approach to study the Redistribution of the Inlet Temperature Distortion in a Turbine Debasish Biswas (Toshiba, Japan) Tomohiko Jimbo #141 CFD Predictions of the Aerodynamics and Heat Transfer from Arrays of Impinging Jets with Crossflow G.E. Andrews (University of Leeds, UK) J. Wang R. A. A. Abdul Hussain

16

#226 Heat Transfer Characteristics of Rib-Roughened Channel with Angled Ribs at Low Pitch-to-Height Ratio Hiroki Kitada (Osaka University, Japan) Kenichiro Takeishi Masaharu Komiyama Yutaka Oda Hidetake Maeda Katsuhiko Ishida (Kawasaki Heavy Industries, Japan) #077 Numerical Optimization of Ribbed Serpentine Cooling Ducts Xiao-Dong Zhang (Chinese Academy of Sciences, China) Jian-Jun Liu Sheng Su

Room 1007

Room 1006

CB(8)Atomization and Ignition

SV(3) Structure, Vibration and Noise III

MT(3) Crack Propagation in Gas Turbine Component

PF(2) Performance II

Chair: Anestis Kalfas (Aristotle University of Thessaloniki, Greece) Yasuhiro Kinoshita (Kawasaki Heavy Industries, Japan)

Chair: Seung Jin Song (Seaul National University, Korea) Yasutomo Kaneko (Ryukoku University, Japan)

Chair: Takashi Ogata (Central Research Institute of Electric Power Industry, Japan) Masaru Sekihara (Hitachi, Japan)

Chair: Changduk Kong (Chosun University, Korea) Eiichi Koda (Central Research Institute of Electric Power Industry, Japan)

#081 Atomization of Liquid Jet by Surrounding Fast Gas Stream Chihiro Inoue (The University of Tokyo, Japan) Toshinori Watanabe Takehiro Himeno Akifumi Koishi Seiji Uzawa

#186 Reduced Order Modeling of a Bladed Rotor with Geometric Mistuning: Alternative Bases and Extremely Large Mistuning Yasharth Bhartiya (The Pennsylvania State University, USA) Alok Sinha

#031 Evaluation of Crack Propagation Behavior in Gas Turbine First-Stage Nozzle Hiroyuki Kagawa (Kansai Electric Power, Japan)

#144 Performance Evaluation of a Microturbine Centrifugal Compressor Using a Novel Modeling Approach Adeel Javed (Delft University of Technology, The Netherlands) Sin-Yun Yang Mattia Olivero Rene Pecnik Jos P. van Buijtenen

#145 Study of Laser Induced Ignition for Combustible Mixtures with Pico-Second Pulse Duration Laser Jun Hayashi (Osaka University, Japan) Kenji Furui Tomoki Okada Noriaki Nakatsuka Takunori Taira (Institute of Molecular Science, Japan) Terushige Hori (Osaka Police, Japan) Fumiteru Akamatsu (Osaka University, Japan)

#218 3-D Linear Unsteady Aerodynamic Force Calculations of Vibrating Blade Rows Using the UPACS-Based CFD Codes Ayumi Kubo (Kyushu University, Japan) Nobuhiko Yamasaki

#223 Ignition Characteristics in Transient Spray by Laser-Induced Plasma Nobuyuki Kawahara (Okayama University, Japan) Eiji Tomita Shinya Nakamura

Room 1005

#061 Fatigue Crack Propagation Behavior Significantly Interacting with Microstructural Units in Thin Wall Ni-Base Superalloy Structures Masakazu Okazaki (Nagaoka University of Technology, Japan) Motoki Sakaguchi Sou Yamanobe

#034 Development and Validation of Flutter Analysis Tool Using a Harmonic Balance Method Mizuho Aotsuka (IHI, Japan) Robert Kielb (Duke University, USA) Kenneth Hall

Room 1004

#170 A Study on Thrust of Radial Turbines That Have a Permanent Magnet Generator Rotor in a Common Shaft Susumu Nakano (Hitachi,Japan) Kuniyoshi Tsubouchi (Formerly Hitachi, Japan) Tomoaki Inoue (Hitachi, Japan) Tadaharu Kishibe Hiroyuki Shiraiwa (Hitachi Engineering & Services, Japan) #190 Gas Turbine Condition Diagnostic Techniques for a Proactive Maintenance Naotaka Mikami (Mitsubishi Heavy Industries, Japan) Isao Moriwaki Erika Funabiki Kazutoshi Ozeki

17

Nov. 15, Tue 9:30-11:00 Conference Hall

Room 1202

Room 1009

Room 1008

AD(1) Aerodynamics of Axial Compressor I

AD(10) Aerodynamics of Turbine IV

HT(4)Heat Transfer Measurement

HT(13) Internal Cooling II

Chair: Jun Li (Xi’an Jiaotong University, China) Yutaka Kawata (Osaka Institute of Technology, Japan)

Chair: Jayanta S. Kapat (University of Central Florida, USA) Takayuki Matsunuma (Advanced Industrial Science and Technology, Japan)

Chair: Akira Murata (Tokyo University of Agriculture and Technology, Japan)

Chair: Shu Fujimoto (IHI, Japan)

#030 Detail Flow Field Investigation of an Axial Flow Compressor at Windmill Condition Motohiro Imaeda (IHI, Japan) Dai Kato Yutaka Ohta (Waseda University, Japan) Goh Totani Eisuke Outa

#175 Time Resolved Full-Annulus Computations of a Turbine with Inhomogeneous Inlet Conditions Rafael R. Adamczuk (Leibniz Universitaet Hannover, Germany) Joerg R. Seume

#019 The Validation between the Measurement and the Calculational Analysis for the Surface Temperature of High-Temperature Turbine Blades in a Gas Turbine Wen Xueyou (Harbin Marine Boiler & Turbine Research Institute, China) Zhang Lichao Gu Zhongming Xiao Dongminf Chen Ruibin

#203 Study on the Effects of Pin Inclination in Convection Cooling for Turbine Blade Toshihiro Takeda (Tokyo University of Agriculture and Technology, Japan) Takashi Yamane (Japan Aerospace Exploration Agency, Japan)

#064 Three-Dimensional Numerical Simulation on Flow Field and Casing Optimization of an Eleven-Stage Axial Compressor Lianhui Zhao (Shanghai Electric Power Generation Group,China) Lei He Qiang Xu Yaoxin Cui (Shanghai Electric Power Generation Equipment, China ) Yu Hu #055 Multi-Objective Optimization of Three-Dimensional Blade Shape for an Axial Compressor Rotor in Transonic Stage Chihiro Myoren (Hitachi, Japan) Yasuo Takahashi Yasuhiro Kato

#215 Aero and Aero-Thermal Characteristics of Turbine Rotor Blade’s Platforms Yasuro Sakamoto (Mitsubishi Heavy Industries, Japan) Takeshi Nakamura Kazuya Nishimura Eisaku Ito #248 Two- and Three-Dimensional Numerical Analysis on Stator-Rotor Interactions in a Supersonic Turbines Takeshi Kai (The University of Tokyo, Japan) Susumu Teramoto Koji Okamoto

#062 Annular Sector Cascade Rig Tests of a CMC Stator Vane with Cooling Structure Kozo Nita (IHI, Japan) Yoji Okita Chiyuki Nakamata

18

#123 Shape Optimization of a Rotating U-Duct Channel with Guide Vanes in the Turning Region Mi-Ae Moon (Inha University, Korea) Kwang-Yong Kim #103 Heat Transfer and Fluid Flow in a Rectangular Channel with the Combination of Dimples, Protrusions and Orthogonal Ribs Yonghui Xie (Xi'an Jiaotong University, China) Jibing Lan Di Zhang

Room 1007

Room 1006

Room 1005

Room 1004

SV(4) Structure, Vibration and Noise IV

ST(1) Steam Turbine I

MT(4) Advance Gas Turbine Material and Repair Technology

PF(3) Performance III

Chair: Alok Sinha (The Pennsylvania State University, USA) Hideki Moriai (Mitsubishi Heavy Industries, Japan)

Chair: Anestis I. Kalfas (Aristotle University of Thessaloniki, Greece) Yoshihiro Sakai (Fuji Electric, Japan)

Chair: Yomei Yoshioka (Toshiba, Japan) Satoshi Takahashi (IHI, Japan)

Chair: Vili Panov (Siemens Industrial Turbomachinery, UK) Norihiko Iki (Advanced Industrial Science and Technology, Japan)

#093 Root Cause Analysis of Impeller Blade Tip Rubbing Luke Park (Doosan Heavy Industries and Construction, Korea) Chang Yong Lee Donghun Kim Jinik Suk

#053 Prediction of Effects of Potential Field Interaction and Wake Interaction on Unsteady Force for Buckets Tomomi Nakajima (Hitachi, Japan) Yoshio Shikano Yutaka Yamashita

#246 A Study on Stacking Method in Advanced Fan Blade Takayuki Fujimoto(Advanced Science and Intelligence Research Institute, Japan) Itaru Kusunoki Toyohiko Ota Daisaku Masaki (Japan Aerospace Exploration Agency, Japan)

#104 Non-Equilibrium Condensing Flow Modeling in Nozzle and Turbine Cascade Xiaofeng Zhu (Tsinghua University, China) Zhirong Lin Xin Yuan Tomohiro Tejima (Toshiba, Japan) Yoshiki Niizeki Naoki Shibukawa

#181 Development of Ni-base Single-Crystal Superalloy for the Next Generation Gas Turbine Blade Ikuo Okada (Mitsubishi Heavy Industries, Japan) Masaki Taneike Hidetaka Oguma Eisaku Ito Keizo Tsukagoshi Tadaharu Yokokawa (National Institute for Materials Science, Japan) Hiroshi Harada

#206 Coolant Modulation and Pre-Cooling to Resolve Turbine Blade Overheating Caused by Firing Syngas in Gas Turbines Ik Hwan Kwon (Inha University, Korea) Do Won Kang Tong Seop Kim Simoon Kim (KEPCO Research Institute, Korea)

#167 Development of an Assistant Design System for Gas Foil Bearings Kai Feng (Tokyo Institute of Technology, Japan) Shigehiko Kaneko (The University of Tokyo, Japan)

#002 Controlling Mixing at the Interaction Zone through Systematic Variation of the Inlet Rotor Cavity Volume and Length Scale Konstantinos G. Barmpalias (ETH Zurich, Switzerland) Anestis I. Kalfas (Aristotle University of Thessaloniki, Greece) Reza S. Abhari (ETH Zurich, Switzerland) Toshio Hirano (Toshiba, Japan ) Naoki Shibukawa Takashi Sasaki

#008 Development of NIMS Burner Rig and Cyclic Oxidation of Ni-base Single Crystal Superalloys Kazuhide Matsumoto (National Institute for Materials Science, Japan) Yutaka Koizumi Kyoko Kawagishi Hiroshi Harada #74 Development and Application of Repair Technology for Land-base Gas Turbine Nozzles Daizo Saito (Toshiba, Japan) Yomei Yoshioka Reki Takaku Kazuhiro Kitayama Yoshiaki Sakai

19

#231 Performance Expectation of a Semi-closed Oxy-Fuel Combustion Combined Cycle Using an Existing Gas Turbine Hyun Jun Yang (Inha University, Korea) Soo Young Kang Do Won Kang Tong Seop Kim #259 Aeroderivative Gas Turbine Solutions for Firming the Grid Daniel A. Loero (GE Energy, USA)

Nov. 15, Tue 11:20-12:50 Conference Hall

Room 1202

Room 1009

Room 1008

AD(2) Aerodynamics of Axial Compressor II

AD(11) Aerodynamics of Turbine V

HT(5) Heat Transfer on Film Cooling I

CB(1) Fuel

Chair: Lianhui Zhao (Shanghai Electric Power Generation Group, China) Chihiro Myoren (Hitachi, Japan)

Chair: Joerg R. Seume (Leibniz University of Hannover, Germany) Takehiro Himeno (The University of Tokyo, Japan)

Chair: Kenichiro Takeishi (Osaka University, Japan) Tomoko Hagari (Kawasaki Heavy Industries, Japan)

Chair: Laurent Zimmer (CNRS-Ecole Centrale Paris, France) Atsushi Makino (Japan Aerospace Exploration Agency, Japan)

#056 Effects of Tip Leakage Vortex Breakdown on Unsteady Flow Fields at Near-Stall Condition in a Low-Speed Axial Flow Compressor Rotor with Large Tip Clearance Kazutoyo Yamada (Kyushu University, Japan) Hiroaki Kikuta Masato Furukawa Satoshi Gunjishima

#254 Transition Mechanisms in Laminar Separated Flow under Unsteady Main Flow Conditions - Part I: Steady Flowfield Christoph Lyko (Technical University of Berlin, Germany) Jerrit Daehnert Dieter Peitsch

#172 Gas Turbine Blade Tip and Near-Tip Heat Transfer with Film Cooling Gregory Kramer (Louisiana State University, USA) Louis Moreaux Sumanta Acharya Chiyuki Nakamata (IHI, Japan)

#013 Alternative Fuels for Aviation Gas Turbine Engines and Efficiency of its Application L.S. Yanovskiy (Central Institute of Aviation Motors, Russia) V.V. Raznoschikov

#046 Span-wise Mixing Prediction by Unsteady Multistage Simulation for a Transonic Axial Compressor Mai Yamagami (IHI, Japan) Hidekazu Kodama Dai Kato Naoki Tsuchiya Yasuo Horiguchi (Advanced Science & Intelligence Research Institute, Japan) Junichi Kazawa (Japan Aerospace Exploration Agency, Japan) #136 Development of a Highly Loaded Axial Flow Compressor for Small Core Size Aircraft Engines Dai Kato (IHI, Japan) Guillaume Pallot Daisuke Sato Mai Yamagami Hidekazu Kodama

#255 Transition Mechanisms in Laminar Separated Flow under Unsteady Main Flow Conditions - Part II: Unsteady Flowfield Christoph Lyko (Technical University of Berlin, Germany) Jerrit Daehnert Dieter Peitsch #152 Secondary Flows and Coolant Film Interaction of High Subsonic Cascade Srikrishna Mahadevan (University of Central Florida, USA) Matthew Golsen C.Q. Nguyen Mark A. Ricklick Jayanta S. Kapat

#195 Film Cooling Performance over Dimpled Cutback Surface at Airfoil Trailing Edge Satomi Nishida (Tokyo University of Agriculture and Technology, Japan) Akira Murata Kousuke Ito Hiroshi Saito Kaoru Iwamoto Yoji Okita (IHI, Japan) Chiyuki Nakamata

20

#092 Development of Biogas Combustor for a Small Size Industrial Gas Turbine Jaechul Chun (Doosan Heavy Industries & Construction, Korea) Ho Keun Kim Ji-Hyuk Im Yunho An Jinhoon Choe #171 Biodiesel and its Blends with Kerosene as an Alternative Fuel in Low NOx Gas Turbine Combustor Mohamed Altaher (The University of Leeds, UK) Hu Li Gordon E. Andrews

Room 1007

Room 1006

Room 1005

Room 1004

CB(9) Numerical Simulation of Combustion I

ST(2) Steam Turbine II

MT(5) Coating Technology

PF(4) System and Control I

Chair: Scott Drennan (Reaction Design, USA) Tomohiro Ide(IHI , Japan)

Chair: Anestis I. Kalfas (Aristotle University of Thessaloniki, Greece) Yoshihiro Sakai (Fuji Electric , Japan)

Chair: Junzo Fujioka(National Institute for Materials Science, Japan) Masaki Taneike (Mitsubishi Heavy Industries, Japan)

Chair: Hiroyuki Furukawa (IHI, Japan) Hisao Futamura (Japan Aerospace Exploration Agency, Japan)

#027 A Coupled Combustion CFD Analysis of an Aircraft Gas Turbine Combustion Chamber Complete with Effusion Cooling Holes Kouji Murata (Honda R&D, Japan) Ryosuke Shibata Yadomaru Go

[Keynote Lecture-4] Recent Technologies for Concentrated Solar Power Systems and Steam Turbines Nobuo Okita (Toshiba, Japan)

#118 Damage Behavior and Residual Interfacial Strength of Thermal Barrier Coatings after Thermal Cycle Fatigue Yasuhiro Yamazaki (Niigata Institute of Technology, Japan) Shin-ichiro Kuga Hirotaka Fukanuma (Plasma Giken, Japan) Naoyuki Ohno

#041 More Electric Engine Architecture for Fuel System of Aircraft Gas Turbine Engine Naoki Seki (IHI, Japan) Noriko Morioka Hitoshi Oyori (IHI Aerospace, Japan)

#066 Large-Eddy Simulation of a Spray Combustion Field in a Scaled Sector Model for a Jet Engine Combustor Hideki Moriai (Mitsubishi Heavy Industries, Japan) Ryoichi Kurose (Kyoto University, Japan) Satoru Komori Fumiteru Akamatsu (Osaka University, Japan) #071 Numerical Investigation of Air-Blasted Liquid Sheet Dynamics Kazuya Koizumi (Keio University, Japan) Akiko Matsuo Atsushi Horikawa (Kawasaki Heavy Industries, Japan) Nonaka Yoshiharu

#146 Blade Manufacturing Process Appraisal Using a Coordinate Measurement Machine Pavlos Zachos (Cranfield University, UK) Anestis Kalfas (Aristotle University of Thessaloniki, Greece) Pericles Pilidis (Cranfield University, UK)

#180 Development of Advanced Thermal Barrier Coating for the Next Generation Gas Turbine Taiji Torigoe (Mitsubishi Heavy Industries, Japan) Hideaki Kaneko Ikuo Okada Eisaku Ito Ichiro Nagano Masahiko Mega Keizo Tsukagoshi Yoshifumi Okajima Yoshitaka Uemura #253 New Materials and Processing Concepts for High Performance Thermal Barrier Coatings Detlev Stoever (Institute of Energy and Climate Research, Germany) Alexandre Guignard Ophelia Jarligo Matthias Karger Daniel E.Mack Georg Mauer Tanja Steinke Robert Vassen

21

#159 Dynamic Simulation of Active Compressor Stability Control for a Gas Turbine Engine Vili Panov (Siemens Industrial Turbomachinery, UK) #200 Load-Following Operations of VHTR Gas-Turbine Cogeneration System for Developing Countries Hiroyuki Sato (Japan Atomic Energy Agency, Japan) Xing L. Yan Yukio Tachibana Yukitaka Kato (Tokyo Institute of Technology, Japan)

Nov. 16, Wed 9:30-11:00 Conference Hall

Room 1202

Room 1009

Room 1008

AD(12) Computational Fluid Dyna mics I

HT(6) Heat Transfer on Film Cooling II

CB(2) Emission I

Chair: Martin Bohle (University Kaiserslautern, Germany) Tetsuya Sato (Waseda University, Japan)

Chair: Ken-ichi Funazaki (Iwate University, Japan) Masahide Kazari (Kawasaki Heavy Industries, Japan)

Chair: Gordon E. Andrews(The University of Leeds, UK) Satoshi Tanimura(Mitsubishi Heavy Industries, Japan)

#072 Speeding up the CFD Process C.F. Favaretto (BoXeR Solutions, Japan) W.P. Kellar (Cambridge Flow Solutions, UK) W.N Dawes. (Cambridge University, UK)

#148 Multi-Row Transpiration Cooling with Comparison to Discrete Arrays Greg Natsui (University of Central Florida, USA) Michael Torrance Mark Miller Mark Ricklick Jayanta Kapat

#038 An Emissions Model for NOx and CO Emission Trends from Industrial Gas Turbines Christos Samaras (Cranfield University,UK, Aristotle University of Thessaloniki, Greece) Giuseppina Di Lorenzo (Cranfield University, UK) Anestis Kalfas (Aristotle University of Thessaloniki, Greece) Pericles Pilidis (Cranfield University, UK)

#114 Numerical Investigations on the Leakage Flow Characteristics of Different Honeycomb Seal Configurations Jun Li (Xi'an Jiaotong University, China) Xin Yan Liming Song Shengru Kong Zhenping Feng #221 Modeling for Prediction of Very Short Ejector Performance Ju Hyun Im (Seoul National University, Korea) Seung Jin Song

#149 Overall Thermal Performance of Transport Promoters in Internal Cooling Channels for Rotating Machineries Michelle Valentino (University of Central Florida, USA) Lucky Tran Carson Slabaugh Mark Ricklick Jay Kapat #057 Heat Transfer and Aerodynamics Studies of Multiple Cooling Holes Kamil Abdullah (Iwate University, Japan) Hisato Onodera Ken-ichi Funazak Takeomi Ideta (IHI , Japan)

22

#142 Effects of Pressure on Prompt NOx Formation Characteristics in Premixed Flame Jun Hayashi (Osaka University, Japan) Noriaki Nakatsuka Yuichi Shiga Hiroyuki Kashihara (Kawasaki Heavy Industries, Japan) Fumiteru Akamatsu (Osaka University, Japan) #232 Simple Low NOx Combustor Technology for Environmentally Compatible Engine(ECO Engine) Tomohiro Ide (IHI, Japan) Nagayoshi Hiromitsu Toshihiro Fujimori Jun Hosoi

Room 1007

Room 1006

CB(10) Numerical Simulation of Combustion II

ST(3) Long Blade Technology of Steam Turbine

DOTT(1) Turbocharger Technology I

PF(5) System and Control II

Chair: Laurent Zimmer (CNRS-Ecole Centrale Paris, France) Nozomu Hashimoto (Central Research Institute of Electric Power Industry, Japan)

Chair: Jun Li (Xi'an Jiaotong University, China) Hiroharu Ohyama (Mitsubishi Heavy Industries, Japan)

Chair: Srithar Rajoo (Universiti Teknologi Malaysia, Malaysia) Hideaki Tamaki (IHI, Japan)

Chair: Vili Panov (Siemens Industrial Turbomachinery, UK) Naohiro Kusumi (Hitachi, Japan)

#256 Assisting Clean Engine Design with Accurate Simulation of Real Fuel Behavior in Gas Turbine Combustors Scott Drennan (Reaction Design, USA)

#168 Development and Verification of The Next Generation's Steam Turbine Toshio Watanabe (Mitsubishi Heavy Industries, Japan) Kazushi Mori Toshihiro Miyawaki Hiroharu Ohyama

[Keynote Lecture-3] Boosting and Turbocharger Needs for Highly Downsized Low Carbon Vehicles Ricardo Martinez-Botas (Imperial College of Science, Technology and Medicine, UK)

#208 Development of a Control System for the Catalytic Combustion Gas Turbine (M1A-13X) So Kurosaka (Kawasaki Heavy Industries, Japan) Muneyuki Nishi Masahiro Ogata Tsuyoshi Sato Mitsugu Ashikaga

#187 Improvement on Light around Characteristics of a Lean Staged Fuel Spray Nozzle (The Second Report) Masayoshi Kobayashi (Kawasaki Heavy Industries. Japan) Ryusuke Matsuyama Atsushi Horikawa Takeo Oda Hitoshi Fujiwara (Japan Aerospace Exploration Agency, Japan) #043 Effect of Ambient Pressure on Spray Jet Flame Behavior Tomoaki Kitano (Kyoto University, Japan) Tomoaki Nakatani Ryoichi Kurose Satoru Komori

#211 Development of Titanium 48-inch Last Stage Series for 3600rpm Steam Turbine Naoki Shibukawa (Toshiba, Japan) Yoriharu Murata Takayuki Hashidate Sakae Kawasaki

Room 1005

#026 Technology of the Turbocharger Applied to IMO2 4-stroke Marine Diesel Engine Kenji Nakano (IHI, Japan) Ryuuma Murano Ken Nakano Yutaka Hirata

#249 Development of Titanium 3600rpm-50inch and 3000rpm-60inch Last Stage Blades for Steam Turbines Shigeki Senoo (Hitachi, Japan) Hideki Ono Takanori Shibata Susumu Nakano Yutaka Yamashita Kunio Asai Kazuya Sakakibara Hideo Yoda Takeshi Kudo

Room 1004

#240 Application of Model-Based Control for JAXA’s Engine Test Takeshi Tagashira (Japan Aerospace Exploration Agency, Japan) Takuya Mizuno Tsunehisa Satake Nanahisa Sugiyama Yasushi Nakata (IHI, Japan) #251 Identification of Jet Engine Dynamics Based on the Experimental Data Mai Kimura (IHI, Japan) Daiki Kakiuchi Hiroyuki Furukawa Takeshi Tagashira (Japan Aerospace Exploration Agency Japan)

23

Nov. 16, Wed 11:20-12:50 (11:05-12:50) Conference Hall

Room 1202

Room 1009

Room 1008

AD(3) Aerodynamics of Axial Compressor III

AD(13) Computational Fluid Dynamics II

HT(7) Heat Transfer on Film Cooling III

CB(3) Emission II

Chair: Lin Feng (Institute of Engineering Thermophysics, China) Dai Kato (IHI, Japan)

Chair: W.N. Dawes (Cambridge University, UK) Koji Okamoto (The University of Tokyo, Japan)

Chair: Phillip M. Ligrani (Saint Louis University, USA) Yoshitaka Fukuyama (Japan Aerospace Exploration Agency, Japan)

Chair: Anestis I. Kalfas (Aristotle University of Thessaloniki, Greece) Ryoichi Kurose (Kyoto University, Japan)

#106 Numerical Calculation of the Riblet-Effect on Compressor Blades and Validation with Experimental Results Christoph Lietmeyer (Leibniz University of Hannover, Germany) Christopher Chahine Joerg R. Seume

#205 Numerical Simulation of a Mixed Flow Compressor at Windmill Yuya Noji (Waseda University, Japan) Masamichi Ogawa Tetsuya Sato Daisaku Masaki (Japan Aerospace Exploration Agency, Japan) Hideyuki Taguchi

#085 Numerical Investigation of the NEKOMIMI Hole Configuration under Hot Gas Conditions Karsten Kusterer (B&B-AGEMA, Germany) Norbert Moritz Nurettin Tekin Takao Sugimoto (Kawasaki Heavy Industries, Japan) Masahide Kazari Ryozo Tanaka Dieter Bohn (RWTH Aachen University, Germany)

#101 Effect of Biodiesel and its Blends Co-firing with Natural Gas on Emissions in a Low NOx Gas Turbine Combustor Mohamed A. Altaher (The University of Leeds, UK) Hu Li Gordon E. Andrews

#220 Streamwise Evolution of Loss in a Shrouded Axial Compressor Cascade Jin Wook Kim (Seoul National University, Korea) Tongbeum Kim (University of the Witwatersrand, South Africa) Seung Jin Song (Seoul National University, Korea) #108 An Integrated Total Pressure and Total Temperature Probe for Local Entropy Measurement Wang Yongsheng (Institute of Engineering Thermophysics, China) Lin Feng Nie Chaoqun

#239 CFD Analysis of a Variable Nozzle Turbine for Automotive Turbocharger Considering Actual Geometries Akihiro Yamagata (IHI, Japan) #241 Numerical Simulation of Icing Phenomena in Fan Rotor/Stator Interaction Field Ryousuke Hayashi (Tokyo University of Science, Japan) Kei Kawakami Masaya Suzuki Makoto Yamamoto Shinichirou Shishido (IHI, Japan) Takashi Murooka Hiroshi Miyagawa

#058 Free-Stream Turbulence Effects on Leading Edge Film Cooling Ken-ichi Funazaki (Iwate University, Japan) Hirokazu Kawabata Yoji Okita (IHI,Japan)

24

#084 Numerical Prediction of NOx Production in Gasturbine Combustor Using LES with 2-Scalar Flamelet Approach Kyohei Matsuya (Hokkaido University, Japan) Tomonori Yamamoto Shingo Nishida Nobuyuki Oshima Yoshiharu Nonaka (Kawasaki Heavy Industries, Japan) Kohshi Hirano

Room 1007

Room 1006

Room 1005

Room 1004

DO(1) Development and Operation I

ST(4) Efficiency Enhancement of Steam Turbine

DOTT(2) Turbocharger Technology II

PF(6) Stability Enhancement I

Chair: Tadashi Tsuji (Maizuru National College of Technology, Japan)

Chair: Jun Li (Xi'an Jiaotong University, China) Naoki Shibukawa (Toshiba, Japan)

Chair: Stephen Spence (Queen's University Belfast ,UK) Hideaki Tamaki (IHI, Japan)

Chair: Dieter E. Bohn (RWTH Aachen University, Germany) Nobuyuki Yamaguchi (Meisei University, retired, Japan)

#005 Outline of Conversion to Gas Turbine Combined Cycle System at Mizushima Thermal Power Station #1 Kyoichi Nakanishi (The Chugoku Electric Power, Japan) Hisanobu Ogawa Shigeru Ashitani Toshio Tsuboi

[Keynote Lecture-5] Fluid Dynamic Efficiency Optimization of Steam Turbine Stages Considering Leakage Influences and Inter-Stage Reciprocal Interferences Xin Yuan (Tsinghua University, China) Qian Pu Xiaofeng Zhu Zhirong Lin Yoshiki Niizeki (Toshiba, Japan) Naoki Shibukawa Tadashi Tanuma (Teikyo University, Japan)

#052 Design and Development of a Low Pressure Turbine for Turbo Compounding Applications Aman M.I. Mamat (Imperial College of Science, Technology and Medicine, UK) Alessandro Romagnoli Ricardo F.Martinez-Botas

[Keynote Lecture-1] Shape Optimization of Casing Treatment for a Transonic Axial Compressor to Improve Operating Stability Kwang-Yong Kim (Inha University, Korea)

#021 The Work of Replacement for the Higher Efficiency Gas Turbine Hideki Yoshigai (Kyushu Electric Power, Japan) Tadaaki Watanabe Eiichi Shiga Masanori Kamimasu

#155 Multilevel Design Optimization for Long Blade of Steam Turbines Using Self-Adaptive Differential Evolutionary Algorithms Liming Song (Xi'an Jiaotong University, China) Hiroharu Ohyama (Mitsubishi Heavy Industries, Japan) Jun Li (Xi'an Jiaotong University) Ming Zhang Zhenping Feng #173 Development of New High-Performance Labyrinth Seal Yoshihiro Kuwamura (Mitsubishi Heavy Industries, Japan) Hiroharu Ohyama Yoshinori Tanaka Shin Nishimoto Kazuyuki Matsumoto Hidekazu Uehara

#121 Effect of Pipe System and Casing Configuration on Surge Phenomenon of Centrifugal Compressor Shouta Ayukawa (Osaka Institute of Technology, Japan) Ken Inoue Kazunari Fukuyama Koichiro Morita Yoshinobu Tsujimoto (Osaka University, Japan) Yutaka Kawata (Osaka Institute of Technology, Japan) #233 Study on the Tip Clearance Effects in the Centrifugal Compressor of a Micro Gas Turbine by Means of Numerical Simulations Mattia Olivero (Delft University of Technology, The Netherlands) Adeel Javed Rene Pecnik Piero Colonna Jos van Buijtenen

25

#070 Stall Inception Model for Fan/Compressors including the Effect of Three Dimensional Blade Shape Xiaohua Liu (Beijing University of Aeronautics and Astronautics, China) Ruiwei Hou (Shenyang Aero Engine Research Institute, China) Dakun Sun (Beijing University of Aeronautics and Astronautics, China) Xiaofeng Sun #099 Comparison of Stability Range Extension with Micro and Large Air Injection in a Low-Speed Axial Compressor Zhiting Tong (Institute of Engineering Thermophysics, China) Jichao Li (China Academy of Science for Postgraduates, China) Chaoqun Nie (Institute of Engineering Thermophysics, China) Jingyi Chen

Nov. 17, Thu 9:30-11:00 (9:30-11:15) Conference Hall

Room 1202

Room 1009

Room 1008

AD(5) Aerodynamics of Radial Compressor I

AD(14) Aerodynamic Design

HT(8) Heat Transfer on Film Cooling IV

CB(4) Combustion Phenomena I

Chair: Takanori Shibata (Hitachi, Japan)

Chair: Seung Jin Song (Seoul National University, Korea) Makoto Yamamoto (Tokyo University of Science, Japan)

Chair: Satoshi Hada (Mitsubishi Heavy Industries, Japan)

Chair: Scott Drennan (Reaction Design, USA) Masao Ito (Toshiba, Japan)

#035 Waveguide Pressure Measuring System and Surge Analysis in a Two-stage High Speed Centrifugal Compressor Chuang Gao (Shanghai Advanced Research Institute, China) Weiguang Huang Hongwu Zhang (Institute of Engineering Thermophysics, China)

#135 Wide Chord Study in Turbo Machinery (The First Report) Satoshi Ohtsuki (HORIBA, Japan).

[Keynote Lecture-7] Aerodynamic Losses in Turbines With and Without Film Cooling (Keynote Lecture) Phillip L. Ligrani (Saint Louis University, USA)

#059 Investigation of Spray Combustion Field with Swirl Flow in a Lab-Scale Aircraft Gas Turbine Combustor Kazuki Tainaka (Osaka University, Japan) Jun Hayashi Hideki Moriai (Mitsubishi Heavy Industries, Japan) Noriaki Nakatsuka (Osaka University, Japan) Ryoichi Kurose (Kyoto University, Japan) Satoru Komori Fumiteru Akamatsu (Osaka University, Japan)

#040 Effects of Impeller-Diffuser Radial Gap on Unsteady Flow Fields in a Centrifugal Compressor with Vaned Diffuser Takashi Goto (Waseda University, Japan) Yutaka Ohta Eisuke Outa #160 Flow Pattern Variation due to Movable Diffuser in Centrifugal Compressor Kyung Jun Kang (Korea Atomic Energy Research Institute, Korea) You Hwan Shin (Korea Institute of Science Technology, Korea) Sang Ik Wu (Korea Atomic Energy Research Institute, Korea)

#201 Investigation on Diffuser Design in Tesla Compression Device Baotong Wang (The University of Tokyo, Japan) Koji Okamoto Susumu Teramoto #127 Design and Numerical Investigation of High-Through-Flow Transonic Fans with Swept and Straight Blade Fang Zhu (Beijing University of Aeronautics and Astronautics, China) Donghai Jin Xingmin Gui

#227 Effect of Endwall Film Cooling on Horseshoe Vortex Formation at the Junction of Airfoil Leading Edge Shintaro Kozono (Osaka University, Japan) Kenichiro Takeishi Yutaka Oda Junichi Seguchi #234 Numerical Study for Dependency of Cross-flow Inlet Turbulence on Film Cooling Effectiveness Shu Fujimoto (IHI, Japan)

26

#129 Detailed Laser-Based Investigation of a Laboratory Scale Liquid Fuel Burner L.Zimmer (CNRS-Ecole Centrale Paris, France) T. Providakis P. Scouflaire S. Ducruix

Room 1007

Room 1006

Room 1005

Room 1004

DO(2) Development and Operation II

ST(5) Ultra-Supercritical Steam Turbine I

DOTT(3) Turbocharger Technology III

PF(7) Stability Enhancement II

Chair: Frans A. E. Breugelmans (von Karman Institute, Belgium) Kazuhiko Tanimura (Kawasaki Heavy Industries, Japan)

Chair: Felipe Favaretto (BoXeR Solutions KK, UK) Eiji Saito (Hitachi, Japan)

Chair: Ricardo F.Martinez-Botas (Imperial College of Science, Technology and Medicine, UK) Seiichi Ibaraki (Mitsubishi Heavy Industries, Japan)

Chair: Yutaka Kawata (Osaka Institute of Technology, Japan)

#051 Development of 1.7MW Class High Efficiency Gas Turbine M1A-17 Takahiko Nakatsuji (Kawasaki Heavy Industries, Japan) Makoto Gouda Yoshihiro Yamasaki Yasufumi Hosokawa Atsushi Norimoto

#169 Development of Advanced USC Technologies for 700°C Class High Temperature Steam Turbines Yoshinori Tanaka (Mitsubishi Heavy Industries, Japan) Shin Nishimoto Ryuichi Yamamoto Yuichi Hirakawa Kenji Kawasaki Masayuki Setoyama

#080 Feature of Internal Flow Phenomena of Centrifugal Compressor for Turbocharger with Wide Operating Range Isao Tomita (Mitsubishi Heavy Industries, Japan) Seiichi Ibaraki Masato Furukawa (Kyushu University, Japan) Kazutoyo Yamada

#014 Steady and Unsteady Flow Effects of Circumferential Grooves Casing Treatment in a Transonic Compressor Rotor Chunill Hah (NASA Glenn Research Center, USA)

#025 MAN’s New Gas Turbine in the 6 MW-Class M. Beukenberg (MAN Diesel and Turbo, Germany) A. Wiedermann U. Orth E. Aschenbruck F. Reiss D. Krueger D. Frank M. Blaswich R. Friedhoff #094 Development of 5MW Gas Turbine for 60Hz for Power Generation Application Samsik Nam (Doosan Heavy Industries & Construction, Korea) Donghwa Kim Kyungkook Kim Sangeon Lee Juncheol Park

#188 Sand Castings made of Alloy 625 and Dissimilar Welding for Steam Turbine Applications Claus Lochbichler (Voestalpine Giesserei Traisen, Austria) Bernhard Berger (Graz University of Technology, Austria) Rudolf Vallant Guenther Moderbacher (Voestalpine Giesserei Traisen, Austria) Franz Kolenz

#109 Application of FMM for Mistuning Analysis of Radial Inflow Turbine Hiroaki Hattori (IHI, Japan)

#082 Effect of Circumferential Single Grooved Casing Treatment on Flow Instability of Transonic Compressor Yasunori Sakuma (The University of Tokyo, Japan) Toshinori Watanabe Takehiro Himeno Dai Kato (IHI, Japan) Motohiro Imaeda [Keynote Lecture-6] A Suggested Mechanism of Significant Stall Suppression by Air Separator Devices in Axial Flow Fans Nobuyuki Yamaguchi (Meisei University, retired, Japan)

27

Nov. 17, Thu 11:20-12:50 Conference Hall

Room 1202

Room 1009

Room 1008

AD(6) Aerodynamics of Radial Compressor II

PF(8) Progress in R&D over Recent 40 years

HT(9) Heat Transfer on Film Cooling V

CB(5) Combustion Phenomena II

Chair: Weiguang Huang (Chinese Academy of Sciences, China) Yutaka Ohta (Waseda University, Japan)

Chair:Makoto Yamamoto (Tokyo University of Science, Japan)

Chair: Chiyuki Nakamata (IHI, Japan)

Chair: Gordon E. Andrews(The University of Leeds, UK) Jun Hayashi (Osaka University, Japan)

#165 Design Optimization of Low Solidity Vaned Diffusers for Centrifugal Compressors Using a Multi-Objective Genetic Algorithm Takanori Shibata (Hitachi, Japan) Manabu Yagi Chihiro Myoren Hideo Nishida (Hitachi Plant Technologies, Japan) Hiromi Kobayashi Masanori Tanaka

#039 Feasibility Study of CCS Introduction Considering Technological and Economic Dimensions –Energy System Design Based on Technological LearningTakafumi Usui (Tohoku University, Japan) Takaaki Furubayashi Toshihiko Nakata

#122 Numerical Study of Film Cooling on a Vane Endwall by Large Eddy Simulation with a Cooling Hole Model Yutaka Oda (Osaka University, Japan) KenichiroTakeishi Masataka Uchibori

#209 An Experimental Study on the Flashback Phenomena of Premixed Combustors using Swirling Flow Yohei Ogawa (Osaka University, Japan) Masaharu Komiyama Kenichiro Takeishi

#126 The Influence of Periodic Unsteady Wakes on Endwall Film Cooling with Combustor-Turbine Interface Gap Leakage Flow Zhang Yang (Tsinghua University, China) Yuan Xin

#235 Effects of Combustor Exit Area on Combustion Characteristics of a Propane-Fueled Annular Combustor for a Several Hundred W-Class Micro Gas Turbine Takashi Sakurai (Tokyo Metropolitan University, Japan) Saburo Yuasa Makoto Haga Hirosh Abe

#174 Numerical Optimization Design of a Centrifugal Compressor Scroll Volute coupled with Impeller and Vaneless Diffuser Shibo Qi (Tsinghua University, China) Xin Yuan

#213 The Evolusion of Airborne Power Systems Ben Jones (Rolls-Royce, UK) #222 Tech CLEAN Project: A Technological Challenge for Environmental Protection Hisao Futamura (Japan Aerospace Exploration Agency, Japan) Yoshitaka Fukuyama Toshio Nishizawa Ryoji Yanagi

#138 Effect of Incidence Angle on Film Cooling - Separating Bubbles Interaction in High Pressure Turbine Hong Yinyi (Tsinghua University, China) Lin Zhirong Yuan Xin

28

#224 PIV Measurement in Gas Turbine Combustor Model Yoshihiro Yarita (Gunma University, Japan) Yuto Endo Tomohiro Ide (IHI , Japan) Nagayoshi Hiromitsu Hisanobu Kawashima (Gunma University, Japan) Tsuneaki Ishima

Room 1007

Room 1006

Room 1005

DO(3) Development and Operation III

ST(6) Ultra-Supercritical Steam Turbine II

DOTT(4) Performance of Turbocharger

Chair:A. Wiedermann (MAN Diesel and Turbo, Germany) Eiichi Koda (Central Research Institute of Electric Power Industry, Japan)

Chair: Felipe Favaretto (BoXeR Solutions KK , UK) Eiji Saito (Hitachi, Japan)

Chair: Ricardo F. Martinez-Botas (Imperial College of Science, Technology and Medicine, UK) Seiichi Ibaraki (Mitsubishi Heavy Industries, Japan)

#214 Oil Scavenging CFD Simulations and Experiments in the Accessory Gearbox of an Aircraft Engine Hidenori Arisawa (Kawasaki Heavy Industries, Japan) Motohiko Nishimura Kenichiro Tanaka Hideyuki Imai Tatsuhiko Goi

#210 Turbine Design and Materials Aspects for A-USC Power Plants Takeo Takahashi (Toshiba, Japan) Yuya Murakami Shogo Iwai Shigekazu Miyashita

#088 Improvement of Turbocharger Compressor Map Width and Performance due to Vanes in the Annular Cavity of a Classical Bleed Slot System Subenuka Sivagnanasundaram (Queen's University of Belfast, UK) Stephen Spence Juliana Early Bahram Nikpour (Cummins Turbo Technologies, UK)

#189 Evolution and Future Trend of Large Frame Gas Turbine for Power Generation-A New 1600 Degree C J Class Gas TurbineSatoshi Hada (Mitsubishi Heavy Industries, Japan) Junichiro Masada Eisaku Ito Keizo Tsukagoshi #197 Progress in Technology Development for the Next Generation High Temperature Gas Turbine Eisaku Ito (Mitsubishi Heavy Industries, Japan) Keizo Tsukagoshi Junichiro Masada Ikuo Okada Yasuro Sakamoto

#176 Material Design and Trial Manufacturing of Ni-base Superalloy for A-USC Steam Turbine Large Components Shinya Imano (Hitachi, Japan) Jun Sato Hironori Kamoshida Eiji Saito

#112 Influence of Variable Nozzle Geometry on Radial Turbine Performance Christoph K Natkaniec (Leibniz Universitat Hannover, Germany) Jasper Kammeyer Joerg R Seume #158 Single Entry Mixed Flow Turbine Performance Prediction with 1-D Gas Dynamic Code Coupled with Mean Line Model M.S. Chiong (Universiti Teknologi Malaysia, Malaysia) S. Rajoo A. Romagnoli (Imperial College of Science, Technology and Medicine, UK) R.F. Martinez-Botas

29

Room 1004

Engines Corp.) Noboru Kuwae (Okinawa Electric Power) Akira Goto (Ebara) Ryosuke Matsumoto (Kansai University) Akiko Matsuo (Keio University) Toshihiro Mizobuchi (Shikoku Electric Power) Akira Murata (Tokyo University of Agriculture and Technology) Takao Nagasaki (Tokyo Institute of Technology) Norio Nakazawa (Aikoku Alpha) Toshio Nishizawa (Japan Aerospace Exploration Agency) Akito Nitta (Central Research Institute of Electric Power Industry) Yoshihiro Ohkomori (Japan Casting & Forging) Yukio Ohtsuki (Kawasaki Heavy Industries) *3 Yoshihiko Oka (Mitsui Engineering & Ship Building) Masahiro Osakabe (Tokyo University of Marine Science and Technology) Eisuke Outa (Professor emeritus, Waseda University) *3 Junichi Saikawa (Niigata Power Systems) Naokatsu Sakuma (Tohoku Electric Power) Tohru Shimizu (Hitachi Zosen) Junichiro Takeda (Fuji Electric) Teiichi Tamaki (IHI) Nobuhiro Tanatsugu (Muroran Institute of Technology) Toshiro Tsuboi (Chugoku Electric Power) Ayao Tsuge (Shibaura Institute of Technology) *3 Tadashi Tsuji (Maizuru National College of Technology) Yoshiharu Tsujikawa (Osaka Prefecture University) Keizo Tsukagoshi (Mitsubishi Heavy Industries) Isamu Yamada (Toho Gas) Katsuhiro Yamamoto (Waseda University) Satoru Yamamoto (Tohoku University) Hideaki Yamane (Ministry of Defense) Saburo Yuasa (Tokyo Metropolitan

9. ORGANIZING COMMITTEE Chair

Haruo Yoshiki (Teikyo Heisei University, Professor emeritus, The University of Tokyo) *3 Co-chair Shigeki Hirano (Osaka Gas) Co-chair Masahiro Iwatani (Kansai Electric Power) Co-chair Yoshiaki Tsukuda (Mitsubish Heavy Industries) Advisor Mototsugu Ito (IHI) *3 Yoshihiro Aburatani (Toshiba) Ichiro Ariga (Professor emeritus, Keio University) *3 Kozo Ban (Chubu Electric Power) Yoshiyuki Fujitsuna (Engineering Research Association for Supersonic Transport Propulsion System) Junzo Fujioka (National Institute of Materials Science) Ken-ichi Funazaki (Iwate University) Masato Furukawa (Kyushu University) Masataka Hashimoto (Kobe University) Shigeru Hayashi (Hosei University) Masafumi Hirota (Mie University) Masakazu Hishinuma (Tokyo Gas) Shinji Honami (Tokyo University of Science) *3 Masahiro Ibi (Kawasaki Heavy Industries) Norihiko Iki (National Institute of Advanced Industrial Science and Technology) Kyoji Inaoka (Doshisha University) Toyohiko Ishimaru (Tokyo Electric Power) Kazuhiro Izaki (Kyushu Electric Power) Shojiro Kaji (Teikyo University, Professor emeritus, The University of Tokyo) Yasutomo Kaneko (Ryukoku University) Hideaki Kaneta (Hitachi) Nobuhide Kasagi (The University of Tokyo) Osamu Kawaguchi (Professor emeritus, Keio University) *3 Genta Kawahara (Osaka University) Yutaka Kawata (Osaka Institute of Technology) Yasuo Koizumi (Shinshu University) Daisuke Koyama (Rolls-Royce Japan) Tatsuo Kuwabara (Japanese Aero 30

University) Atsukuni Waragai (Honda R&D) Toshinori Watanabe (The University of Tokyo) Yasuyuki Watanabe (IHI) *3 Hiro Yoshida (Kanagawa Institute of Technology) *3

Industries) Koji Yasuda (Hitachi) 10.2 General Affairs Committee Chair Terutaka Fujioka (Central Research Institute of Electric Power Industry) Secretary Kazumitsu Takanishi (Kansai Electric Power) Takeharu Hasegawa (Central Research Institute of Electric Power Industry) Takeshi Kimura (Kawasaki Heavy Industries) Masao Mizukawa (Kansai Electric Power) Osamu Nozaki (Japan Aerospace Exploration Agency) Yutaka Oda (Osaka University) Kazumasa Takata (Mitsubishi Heavy Industries)

Former President of GTSJ (in alphabetical order)

10. EXECUTIVE COMMITTEE 10.1 Executive Committee Chair Ken-ichiro Takeishi (Osaka University) Co-Chair Mikio Sato (Central Research Institute of Electric Power Industry) Secretary Kei-ichi Okai (Japan Aerospace Exploration Agency) Advisor Osamu Kawaguchi (Professor emeritus, Keio University) *3 Advisor Yukio Ohtsuki (Kawasaki Heavy Industries) *3 Advisor Eisuke Outa (Professor emeritus, Waseda University) *3 Advisor Teiichi Tamaki (IHI) Advisor Keizo Tsukagoshi (Mitsubishi Heavy Industries) General Affairs Committee Chair Terutaka Fujioka (Central Research Institute of Electric Power Industry) Kazumitsu Takanishi (Kansai Electric Power) Program Committee Chair Yoshinobu Tsujimoto (Osaka University) Makoto Yamamoto (Tokyo University of Science) Nobuhiko Yamasaki (Kyushu University) Financial Committee Chair Shigemichi Yamawaki (IHI) Jun-ichi Hirokawa (IHI) Exhibit Committee Chair Junichiro Masada (Mitsubishi Heavy Industries) Kazuhiro Kitayama (Toshiba) Toyoaki Komori (Mitsubishi Heavy Industries) Events Committee Chair Yasuhiro Kinoshita (Kawasaki Heavy Industries) Atsushi Horikawa (Kawasaki Heavy

10.3 Program Committee Chair Yoshinobu Tsujimoto (Osaka University) Secretary Makoto Yamamoto (Tokyo University of Science) Secretary Nobuhiko Yamasaki (Kyushu University) Fumiteru Akamatsu (Osaka University) Ken-ichi Funazaki (Iwate University) Hiroyuki Furukawa (IHI) Seiichi Ibaraki (Mitsubishi Heavy Industries) Norihiko Iki (Advanced Industrial Science and Technology) Kuniyuki Imanari (IHI) Eisaku Ito (Mitsubishi Heavy Industries) Shigehiko Kaneko (The University of Tokyo) Masahide Kazari (Kawasaki Heavy Industries) Eiichi Koda (Central Research Institute of Electric Power Industry) Atsushi Makino (Japan Aerospace Exploration Agency) Toshihiko Nakata (Tohoku University) Takashi Ogata (Central Research Institute of Electric Power Industry) Yutaka Ohta (Waseda University) Youji Ookita (IHI) Eiji Saito (Hitachi) Takanori Shibata (Hitachi) Hisato Tagawa (Hitachi) Hideaki Tamaki (IHI) 31

Kazuhiko Tanimura (Kawasaki Heavy Industries) Tadashi Tanuma (Teikyo University) Toshinori Watanabe (The University of Tokyo) Akira Yoshinari (Hitachi) Yomei Yoshioka (Toshiba)

Industries) Daisuke Segawa (Osaka Prefecture University) Koji Yasuda (Hitachi) *3

10.4 Financial Committee Chair Shigemichi Yamawaki (IHI) Secretary Jun-ichi Hirokawa (IHI) Kosuke Kasahara (IHI) Hiroyuki Sugiura (Kawasaki Heavy Industries) 10.5 Exhibit Committee Chair Masada Junichiro (Mitsubishi Heavy Industries) Secretary Toyoaki Komori (Mitsubishi Heavy Industries) Secretary Kazuhiro Kitayama (Toshiba) Hiroyuki Hara (Mitsubishi Heavy Industries) Toshihiko Inoue (Kawasaki Heavy Industries) Yosuke Ishikawa (Toshiba) Takashi Kishine (Mitsubishi Heavy Industries) Masayoshi Nakamura (General Electric International) Makoto Nishimura (Hitachi) Shinju Suzuki (Toshiba) Toshiyuki Tomoda (Kansai Electric Power) Akitomo Tsukahara (Mitsubishi Heavy Industries) Hideshi Yamada (Japan Aerospace Exploration Agency) Naofumi Yamagata (Fuji Electric) Tomohiko Yamamoto (Mitsubishi Heavy Industries) Toru Yanagisawa (Osaka Gas) Takayuki Yoshikuni (IHI) 10.6 Events Committee Chair Yasuhiro Kinoshita (Kawasaki Heavy Industries) Secretary Atsushi Horikawa (Kawasaki Heavy Industries) Hiroshi Iwai (Kyoto University) Akiko Matsuo (Keio University) Hidehiko Nishumura (Mitsubishi Heavy 32

Former President of GTSJ (in alphabetical order)

11. INFORMATION OF GAS TURBINE SOCIETY OF JAPAN (GTSJ) ABOUT GTSJ Gas Turbine Society of Japan (GTSJ), the sponsor of IGTC '11 Osaka, was founded in 1976, based on Gas Turbine Committee of Japan established in 1972. GTSJ aims to promote science, technology and social development through information exchange, publication, technology research and other activities in the fields of all types of gas turbines, turbomachinery and energy conversion. GTJS members come from a wide variety of organizations; gas turbine manufacturing companies, users, universities, national laboratories, and other corporations. Currently more than 2,000 individuals join GTSJ and more than 100 corporate members support the activities of GTSJ. MEMBERSHIP Member: an individual who agrees to the objective of GTSJ. Student Member: a student in university (master or bachelor course), technical college, or equivalent organization, who agrees to the objective of GTSJ. (A PhD candidate is classified into "Member".) Corporate Member: an organization which agrees to the objective of GTSJ and supports its activity. Table 3 Enrolment and Annual Membership Fees Membership

Enrolment Fee

Member Student Member Corporate Member

500yen 500yen 1,000yen

Annual Membership Fee 5,000yen 2,500yen 70,000yen/unit

PUBLISHING ACTIVITIES Journal of the Gas Turbine Society of Japan (published bimonthly, in Japanese) The Journal provides information on a variety of gas turbine and turbomachinery and energy technologies with original technical papers, reports, and introductions of new products. International Journal of Gas Turbine, Propulsion and Power Systems (JGPP) (Web journal, published online in English) JGPP covers a wide range of engineering information concerning gas turbines and related power systems. URL: http://www.gtsj.org/english/jgpp/index.html MEMBERSHIP APPLICATION GTSJ offers several ways for you to apply for membership. Download the membership application form from: http://www.gtsj.org/admission/index.html Please contact GTSJ office for detail. OFFICE OF GTSJ Office director: Katsuhide Hiraoka Address: 7-5-13-402, Nishi-Shinjuku, Shinjuku-ku, Tokyo 160-0023 JAPAN Fax: +81-3-3365-0387 E-mai1: gtsj-office＠gtsj.org http://www.gtsj.org/english/index.html

33

MEMO

34

MEMO

35

12. ACCESS TO CONGRESS VENUE & FLOOR GUIDE ACCESS TO CONGRESS VENUE

Shuttle Bus Service of Rihga Royal Hotel is available from the Hotel Bus Stop near the Sakurabashi Exit of JR Osaka Station (approximately 10 min for single way, free of charge). Maps of JR Osaka Station are available at Osaka Station City's web site (http://osakastationcity.com/en/). Nearest stations guide (from http://www.gco.co.jp/en/riyo/access.html) ■Keihan Nakanoshima Line: Next to Exit No.2 of Keihan Nakanoshima (Osaka International Convention Center) Station. ■JR Loop Line: 10-minute walk from Fukushima Station. ■JR Tozai Line: 10-minute walk from Exit No.2 or No.3 of Shin-Fukushima Station. ■Hanshin Railway: 10-minute walk from Exit No.3 of Fukushima Station. ■Subway: 10-minute walk from Exit No.1 of the Central Line or Exit No.9 of the Sennichimae Line of Awaza Station.

FLOOR GUIDE

Revised October 27, 2011 Issued October 21, 2011 Copyright (C) 2011 Gas Turbine Society of Japan