Professional Chemical Treatments and Equipment

Content ■ Fuel system – Diesel 6 ■ Fuel system – Petrol 8 ■ Fuel system – Petrol & Diesel 9 ■ Oil & Transmission Systems 11 ■ Cooling System 12 ■ Workshop & Service 15 ■ Air Treatment 16 ■ Automatic Transmission Service 16 ■ Power Steering Service 17 ■ Fuel Service 18 ■ Cooling System Service 18 ■ Brake Service 19 ■ ServePlus

4

Over 70 years experience Wynn’s offers professional chemical treatments that restore optimal operation in vehicle systems. As an alternative to mechanical repairs, many car problems can be resolved or prevented using chemical treatments that are: • efficient • affordable • easy-to-use

With over 70 years experience, Wynn’s R&D Division has worked continuously to remain at the forefront of cleaning and lubricating technology, while ensuring that all Health and Safety and Environmental requirements are met.

Wynn’s chemicals meet the specific requirements of modern engines, while optimizing and protecting older vehicles. Also, with fuel prices consistently increasing, many Wynn’s treatments improve the fuel economy in cars.

Wynn’s manufacturing plants operate according to an ISO 9001 certified quality system. Many products are approved by a number of worldwide vehicle manufacturers.

The Wynn’s range of specialty chemicals includes: • fuel system products • oil and transmission products • cooling system products • air treatment • workshop & service products

Wynn’s extensive knowledge of the automotive market and its ever-changing requirements form the basis of our product development.

Wynn's relies on a well-structured, global distribution network of subsidiaries and distributors. The Wynn's brand is present worldwide: in Europe, the Middle East, Africa, North and South America, Asia and Australia. In 2005, Wynn’s joined the Performance Polymers division of Illinois Tool Works.

Fuel System - Diesel Both modern cars and older vehicles have specific requirements, that have a chemical solution to provide the optimal engine performance and driving comfort. Modern fuel systems are highly tuned and therefore more susceptible to the negative effects of chemical reactions in the fuel. These lead to fouling of the fuel system, lack of lubrication, corrosion and other problems. Older vehicles experience problems to obtain the correct air/fuel ratio and combustion efficiency due to accumulation of deposits in the fuel system and wear on the components. Premium product

Diesel Power 3 with Cerium Nanotechnology Ref. Nr. 50393 – 500 ml

Diesel Clean 3

Premium product

Diesel EGR 3

Premium product

Ice Proof for Diesel

Diesel System Cleaner

Diesel Clean-up

Ref. Nr. 12293– 500 ml

Ref. Nr. 23379 – 200 ml

Ref. Nr. 90795 - 1 litre

Ref. Nr. 46754 - 325 ml

Ref. Nr. 25241 – 325 ml

Very strong cleaning of injectors. Keeps EGR valve and turbo clean.

Cleans the air intake, inlet valves, air flow sensor, EGR and turbo of all diesel engines.

Flow improver for diesel fuel at low temperatures.

Cleans and lubricates the fuel system.

Cleans the diesel fuel system.

Properties

Properties

Properties

Properties

Properties

• Cleans injectors and keeps EGR valve and turbo clean. • Restores combustion and engine performance. • Protects and lubricates effectively injectors and pumps.

• Provides immediate thorough cleaning of air intake system, air flow sensor, inlet valves, turbo and EGR system. • Dissolves gum, lacquer, tar, carbon and deposits. • Provides a regular and stable idle.

• Prevents the growth of wax crystals in diesel fuel at low temperatures. • Prevents settling and accumulation of wax crystals at the bottom of the tank (“Antiwax settling”). • Makes the diesel fuel wintersafe up to -26°C/-30°C depending on the properties of the diesel fuel.

• Cleans and lubricates the fuel pump and injectors. • Restores original spray pattern of the injectors resulting in better combustion. • Compensates lack of lubricity of low sulphur fuels. • Eliminates condensation water.

• Concentrated, undiluted diesel fuel system cleaner. • Cleans injectors, restores spray pattern. • Decarbonises the combustion chamber. • Improves combustion; reduces exhaust smoke. • Lubricates the fuel pump.

Regenerates the diesel particulate filter and reduces exhaust emissions and soot. Properties

Applications

• Regenerates diesel particulate filter. • Reduces exhaust emissions and soot. • Improves combustion, engine performance and fuel economy.

• For all diesel engines. • For diesel and bio diesel up to B30. • Harmless for catalytic convertors and diesel particulate filters.

Directions • To regenerate diesel particulate filter: use every 3 to 5000 km (1800 to 3000 miles). • To keep injectors clean: use every 10000 km (6000 miles). • Use one bottle on 50 litres of fuel.

Applications

Cerium action – Nanotechnology Accelerates the combustion of soot particles. As a result the combustion temperature of the soot drops, so that the amount of soot is considerably clogged soot filter clean soot filter reduced at lower exhaust temperatures. The aftercombustion of the soot particles will lead to a regeneration of the soot filters.  without cerium with cerium

black smoke

4

• For all diesel engines, including common rail and pump injector engines. • For diesel and bio diesel up to B30. • Harmless for catalytic convertors and soot filters.

Directions • For best results use one bottle in a half-full tank (± 20 litres of fuel). • Repeat every 10.000 km (6000 miles).

Applications • For all diesel engines. • Harmless for catalytic convertors and diesel particulate filters.

Directions • See label. • Recommended to be used at each service interval to maintain cleanliness.

Applications • For all diesel engines with or without turbochargers. • For all diesel fuels and biodiesel up to B05.

Directions • Add 250 ml per 100 litres diesel fuel when the fuel temperature is above 5°C.

Applications • For all diesel engines with or without turbochargers.

Directions • 325 ml every 7.500 to 10.000 km.

Applications • For all diesel engines, including common rail designs. • To be added directly to the diesel fuel filter.

Directions • See instructions on bottle for use. DO NOT add to fuel tank

For a complete engine cleaning, we recommend using both: • Diesel Clean 3 (Liquid): curative treatment Cleans the fuel system; the “wet” part of the engine. • Diesel EGR 3 (Aerosol): curative treatment Cleans the air intake manifold and the inlet valves; the “dry” part of the engine.

no smoke

For further information:

See Safety and Technical Data Sheet.

5

Fuel System - Petrol

Petrol Power 3

Premium product

Premium product

Petrol Clean 3

Petrol EGR 3

Premium product

Fuel System Cleaner

Air Intake and Carburettor Cleaner

Ref. Nr. 29393 – 500ml

Ref. Nr. 29793 – 500 ml

Ref. Nr. 29879 – 200 ml

Ref. Nr. 61354 - 325 ml

Ref. Nr. 54179 - 500 ml

Cleans and protects injectors, inlet valves and EGR system. Reduces fuel consumption.

Very strong cleaning of injectors, inlet valves and EGR system.

Cleans the air intake, inlet valves, air flow sensor and EGR system of all petrol engines.

Maintains the cleanliness of the fuel system. Reduces the octane requirement increase of the engine due to fouling.

Eliminates dirt and deposits in the air intake manifold and on the visible carburettor parts. Throttle valve cleaner.

Properties

• One tank clean-up: instantly cleans and protects injectors, inlet valves and EGR system. • Restores combustion and engine performance. • Reduces CO and HC exhaust emissions.

Properties • Cleans and protects injectors, inlet valves and EGR system. • Improves combustion, engine performance and fuel economy. • Protects the engine when using E10 fuel.

Applications • For all petrol engines (injection, direct injection or carburettor). • For petrol and bio petrol up to E10. • Harmless for catalytic convertors.

Directions • Use one bottle on 50 litres of fuel. • Repeat every 10000 km (6000 miles).

Applications • For all petrol engines (injection, direct injection or carburettor). • For petrol and bio petrol up to E10. • Harmless for catalytic convertors.

Directions • Use one bottle on 50 litres of fuel. • Repeat every 10000 km (6000 miles).

CO-emission

Properties

Properties

• Prevents the formation of deposits on injectors and valves as well as in the carburettor. • Lubricates the injectors, the inlet valves and the fuel system.

• Quickly dissolves and removes dirt. • Strong power jet spray to support cleaning action.

Applications • For all petrol engines. • Harmless for catalytic convertors

Applications • For all petrol engines with injection systems or carburettor.

Directions • Spray on visible carburettor parts. • For air intake systems and PCV valve of injection and carburettor petrol engines.

Directions • Apply every 2,000 km. 325 ml treats 40/70 litres petrol. • In intensive and city traffic: one bottle every tank filling.

Directions

Before After

Properties • Provides immediate thorough cleaning of air intake system, air flow sensor, inlet valves, and EGR system. • Dissolves gum, lacquer, tar, carbon and deposits. • Provides a regular and stable idle. • Restores or maintains the engine performance. • Eliminates and avoids starting problems. • Improves accelerating properties.

-50%

HC-emission

• See label • Recommended to be used at each service interval to maintain cleanliness.

Before After

-30%

Can reduce the CO-emission up to 50% and the HC-emission up to 30%.

For a complete petrol engine cleaning, we recommend using both: • Petrol Clean 3 (Liquid): curative treatment Cleans the fuel system: the “wet part” of the engine • Petrol EGR 3 (Aerosol): curative treatment Cleans the air intake manifold and the inlet valves: the “dry part” of the engine.

6

For further information:

See Safety and Technical Data Sheet.

7

Oil & Transmission Systems

Fuel System Petrol & Diesel

City traffic, traffic jams and short drives lead to higher stress on today’s vehicles engine lubrication. In combination with long oil change intervals, this can lead to a premature degradation of the oil properties and loss of functionality of the engine components in the oil system.

Dry Fuel

Fuel Stabilizer

Super Friction Proofing®

Oil System Cleaner

Super Charge®

Engine Oil Stop Leak

Automatic Transmission Treatment

Ref. Nr. 71854 - 325 ml

Ref. Nr. 47355 - 325 ml

Ref. Nr. 47044 - 325 ml

Ref. Nr. 47244 - 325 ml

Ref. Nr. 74944 - 325 ml

Ref. Nr. 77441 - 325 ml

Ref. Nr. 64544 - 325 ml

Improves lubrication, keeps the lubricating system clean and reduces friction.

Cleans and protects the lubricating system so preventing immediate contamination of fresh oil by residues left behind.

Improves the high temperature viscosity properties of engine oil and stops oil leaks.

Prevents and stops oil leaks without dismantling.

Stops leaks and eases shifting of automatic transmissions.

Properties

Properties

Properties

Applications

Properties

Properties

• Reduces excessive oil consumption via piston rings and valve guides. • Increases the viscosity index of the oil. • Rejuvenates rubber oil seal rings and O-rings. • Restores compression and oil pressure. • Reduces exhaust smoke due to oil consumption and oil burning.

• Effective under heavy load and high temperature operation. • Specially recommended for older engines.

Directions

• Revitalises rubber and neoprene seals and O-rings of crankshaft, camshaft and valve stems. • Does not influence oil quality or viscosity.

• 325 ml treats up to 3 to 6 litres of engine oil (every oil change).

Applications

• Rejuvenates rubber seals and O-rings. • Cleans and protects the system by means of detergents and dispersants. • Prevents ageing and oxidation of automatic transmission fluid.

Absorbs condensation water in the fuel system (suitable for diesel and petrol engines).

Preserves the fuel when the engine is out of use for a long time or when the fuel remains in the tank for a long period, e.g. petrol in LPG engines.

Properties

Properties

• Protects against rust and corrosion. • Prevents icing in the carburettor and fuel filter. • Provides a better cold start performance.

• Protects the fuel against oxidation. • Prevents deposit formation in the tank and filter caused by oxidation products. • Eases starting of the engine after a period of extended shutdown.

Applications • For all petrol and diesel engines with or without turbochargers. • For cars, trucks, stationary and marine engines, storage tanks.

Directions • Normal dose: add 325 ml every 10,000 km.

Applications • For petrol and diesel engines.

Directions • 325 ml treats up to 50 litres of fuel.

• Reduces friction and wear. • Conditions metal surfaces and puts a protective layer on them. • Reduces oxidation and premature thickening of the oil. • Prevents formation of deposits and sludge. • Retards fouling of the oil filters.

Applications • For all petrol and diesel engines with or without turbochargers. • Recommended for old as well as new vehicles after the running-in period.

Directions • 325 ml treats up to 3 to 6 litres of engine oil (every oil change).

• Dissolves deposits and keeps dirt and crankcase impurities in suspension. • Internally cleans engines, hydraulic systems, gearboxes and differentials. • Frees sticking piston rings and hydraulic valve lifters. • Contains EP additives for extra protection.

• Recommended for all petrol and diesel engines with or without turbochargers, which suffer from oil loss.

Applications • For petrol and diesel engines with or without turbochargers and for stationary equipment. • Manual gearboxes, differentials and reduction gears.

Directions Viscosity increase

• 325 ml treats up to 3 to 6 litres of engine oil.

Oil Temperature 100°C

Directions

13.5 mm2/s

SAE 5W40 non-treated

• 325 ml treats up to 3 to 6 litres of engine oil. • Manual gearboxes, differentials and reduction gears and hydraulic systems: add 5 % Wynn’s Oil System Cleaner to the oil.

SAE 5W40 + 10 % Super Charge

13 mm2/s

7 mm2/s

• Can be added to all conventional ATF fluids meeting Dexron II, III or VI, Ford, LHM or equivalent specifications. Also for power steering systems containing ATF fluids.

Directions • 325 ml treats up to 6.5 litres of automatic transmission fluid.

+30%

18.5 mm2/s

Applications

19 mm2/s

Compression value in bar Before

Friction coefficient Fully synthetic engine oil Fully synthetic engine oil + Super Friction Proofing®

-35% Less metal wear

8

After 1 2 3 4 5 6 7 8

1 2 3 4 5 6 7 8 3

5

7

9

11

13

15

17

+30% 3

5

7

9

11

13

15

17

For further information:

See Safety and Technical Data Sheet.

9

Oil & Transmission Systems

Cooling System Cooling system problems, such as leaks and insufficient cooling due to fouling of the system, are the primary causes of vehicle breakdowns. To prevent these problems Wynn’s recommends radiator treatments.

Power Steering Stop Leak

Hydraulic Valve Lifter Concentrate

Cylinder Block Seal

Antifreeze Longlife

Cooling System Stop Leak

Cooling System Flush

Ref. Nr. 59403 / 59405 - 125 ml

Ref. Nr. 64503 / 64505 - 125 ml

Ref. Nr. 76844 - 325 ml

Ref. Nr. 72250 - 325 ml

Ref. Nr. 90501 – 1 litre Ref. Nr. 90596 – 5 litres Ref. Nr. 90599 – 200 litres

Ref. Nr. 45644 - 325 ml Ref. Nr. 45695 - 1 litre

Ref. Nr. 45944 - 325 ml Ref. Nr. 45995 - 1 litre

Improves the anti-wear and viscosity characteristics of gearbox oil.

Stops and prevents leaks in the power steering system.

Restores efficient working of hydraulic valve lifters.

Stops small leaks in the radiator and cooling system.

For a thorough cleaning of the cooling system.

H.P.L.S. Transmission Treatment (+Stop Leak)

Repairs cracks in cylinder blocks without dismantling.

Protects the cooling system against freezing and metal corrosion during 3 years.

Properties

Properties

Properties

Properties

Properties

Properties

• Prevents and stops oil leaks. • Eases shifting. • Reduces noise, friction and wear in manual transmissions and differentials.

• Prevents and stops oil leaks without dismantling. • Revitalises rubber and neoprene seals and O-rings.

• Releases sticking valve stems and hydraulic valve lifters. • Dissolves dirt, gum and varnish deposits in the oil channels. • Contains anti-wear additives. • Quietens valve train noise.

• Repairs cracks in cylinder blocks of cast iron, steel and aluminium, without dismantling. • Assures a permanent repair in 30 minutes. • Resists high temperatures, water pressure and vibration. • Does not clog hoses.

• Permits effective engine cooling. • Anticorrosion protection of all metals and alloys used in the cooling system. • Protection against frost (see table). • Compatibility with rubber and plastics used in the cooling system. • Can be readily used in combination with Wynn’s Cooling System Stop Leak. • Nitrite, amine and phosphate free.

• Stops and prevents leaks in the radiator and cooling system. • Improved corrosion and rust protection. • Compatible with all antifreezes and coolants, also with OAT coolants (Organic Acid Technology). • Will not repair broken or split hoses. • Does not clog radiator waterways. • Will not harm rubber hoses, gaskets or other system components.

Applications • For steering gears, manual gearboxes and differentials. Can be used for API GL, as well as ATF Dexron oils.

Directions • 125 ml treats up to 2 litres of oil.

Applications • Can be added to all conventional power steering oils meeting Dexron II, Dexron III, Ford, LHM or equivalent specifications.

Applications

Directions

Directions

• 125 ml treats up to 2 litres of oil.

• 325 ml treats up to 3 to 6 litres of engine oil.

• Recommended for all petrol and diesel engines with or without turbochargers.

Applications • Internal and external cracks in cylinder blocks. • In case of severe white exhaust smoke.

Directions • See technical data sheet or peel-off label. • 325 ml treats cooling systems with a capacity between 4 - 8 litres.

Important • Wynn’s Cylinder Block Seal is not compatible with cooling liquids. It should only be added to pure water. Do not pour it into oil, or directly into the cylinders.

Applications • For all “water” cooled systems. • Meets most international standards. • To be used diluted in water, as a function of the exterior temperature expectations.

Directions • See label.

Freezing Point -36°C -17°C -12°C

10

Properties

Parts Antifreeze

Parts water

1 1 1

1 2 3

Applications • For all “water” cooled systems of petrol and diesel engines.

Directions • Add the total contents to the cooling system via the expansion tank (if part of the system circuit), or directly into the radiator (if a single hose overflow tank is fitted). • Top up the system with coolant if required. • Run engine for approximately 5 minutes to circulate and stop leaks. • 325 ml treats cooling systems with a capacity between 5 - 12 litres.

• Powerful, acid free radiator cleaner. • Dual action: removes scale and eliminates rust, deposits and oily residues • Excellent performance in OAT-coolants (Organic Acid Technology). • Safe for all metals and hoses in cooling systems.

Applications • For all “water” cooled systems of petrol and diesel engines.

Directions • Add contents to the cooling system via the expansion tank (if part of the system circuit) or directly into the radiator (if a single hose overflow tank is fitted). • Let the engine run at idle for 10 minutes. • Stop the engine and allow it to cool, then open and drain system. • With system still open, flush with water until clear, close and refill with coolant. • 325 ml treats cooling systems with a capacity between 5 - 12 litres.

In order to obtain the optimal action of Wynn’s Cooling System Flush, we recommend using the Wynn’s CoolingServe™ machine

Special Coolant G12 Concentrated

Ref. Nr. 23495 – 1 litre Ref. Nr. 23496 – 5 litres Ref. Nr. 23497 – 25 litres Ref. Nr. 23499 – 200 litres

Protects the cooling system against corrosion and attack of non-ferrous metals. Properties • Protects the cooling system against freezing and overheating. • Contains a pH buffer which retards the acidification of the liquid and consequently prolongs its lifetime (4-5 years). • Can remain in the cooling system during 4 to 5 years. • Protects against rust and corrosion and especially against electrolysis and pitting of aluminium components. • Neither contains silicates, nor nitrites and phosphates. • Prevents scale formation. • Meets the Volkswagen type G12 standard.

Applications • Recommended for all “water” cooled systems of petrol and diesel engines. • To be used diluted in water.

Directions • See label. Freezing Parts Special Point Coolant G12 -69°C 2 -36°C 1 -17°C 1 -12°C 1

Parts Water 1 1 2 3

For further information:

See Safety and Technical Data Sheet.

11

Workshop & Service Products Easy to use and high quality cleaning and lubrication products that meet today’s market demands.

Viscotene

Silicone Lubricant

Ref. Nr. 80179 - 500 ml

Ref. Nr. 52579 - 500 ml

Strongly adhesive and highly viscous synthetic lubricant.

Silicone based lubricant.

Properties • Exceptionally adhesive to surfaces. • Water-repellent and waterresistant. • Reduces and dampens noise of mechanisms. • Resists steam washout, solvents, high temperatures and acids. • Compensates for variations in clearance and pressure.

Applications • Mechanisms exposed to moisture, warm or cold water, detergents, acids, steam, etc. • Equipment for which conventional lubricants drip or leak away.

Directions • Apply the product. • Allow solvent to sufficiently evaporate, prior to further manipulation of the material.

12

Brake and Clutch Cleaner

Super Rust Penetrant

Chain Lube

Starting Fluid

Ref. Nr. 56479 - 500 ml

Ref. Nr. 66479 - 500 ml

Ref. Nr. 58055 – 200 ml

Powerful product for cleaning and degreasing of mechanical parts.

Multifunctional lubricant and penetrating oil.

Strongly adhesive water repellent lubricant with high penetrating properties.

Eases petrol and diesel engine starting at cold temperatures.

Properties

Properties

Properties

Properties

Properties

• Provides dry lubrication. • Reduces static electricity. • Prevents sticking of materials. • Water and moisture repellent. • Does not stick, stain and oxidize.

• Removes oil, brake fluid, grease and other dirt from metal components. • Eliminates dust from brake and clutch parts.

• Retards friction and wear. • Resists mud, cold, hot and salt water. • Does not conduct electricity.

• Helps instant engine starting. • Prevents battery fatigue.

Applications

Applications

• On different material combinations: plastic on metal, on wood, metal on metal, rubber mouldings, etc. • Ignition mechanisms in electrical systems of vehicles. • Prevents jamming or freezing of windows, doors, sliding doors, etc.

• Brake parts. • Clutch parts. • Mechanical parts of cars, bicycles, machines, etc.

• Quickly frees locked, rusted or corroded parts. • Lubricates and cleans precision parts and devices. • Repels water and moisture. • Stops squeaking and creaking. • Prevents short circuits in electrical systems.

Ref. Nr. 61479 - 500 ml Ref. Nr. 11196 - 5 litres Ref. Nr. 61497 - 30 litres

Directions • Apply by means of aerosol and allow running off. • Let it dry naturally, with compressed air or wipe off with a cloth. • Do not use on plastics or painted surfaces.

Applications • Rusted joints and fittings. • Cables and precision mechanisms. • Removes humidity on spark plugs and in distributors. • To free parts. • Removes humidity on the ignition (spark plugs).

Applications • Motorcycle and bicycle chains, chain saws, chain conveyors. • Tools for workshops, DIY, agriculture, etc.

Applications • All types of two- and four-stroke petrol and diesel engines. • Small engines such as outboards, chain saws and lawn mowers.

Directions • Spray on elements to lubricate only. • Let the solvent evaporate.

For further information:

See Safety and Technical Data Sheet.

13

Workshop & Service

Air Treatment Air quality problems are easily solved with the Wynn’s air treatments. There is Airco-Clean® to disinfect and clean the aeration and air conditioning system, and Air Purifier to remove bad smells from the passenger compartment.

Super Concentrated Screen-wash 21+

Airco-Clean® – ultrasonic for cars for exclusive use with Aircomatic® equipment Ref. nr. 30205 - 100 ml

Properties

Applications

• Removes fouling and nicotine from the evaporator. • Disinfects and eliminates microbes, fungi and bacteria. • Removes cause of allergic reactions (sneezing, coughing, irritation to eyes …). • Cleaning action of the detergents against all impurities.

• All air-conditioning systems of cars, trucks and buses.

Air Purifier – ultrasonic for cars for exclusive use with Aircomatic® equipment

MOLECULAR TECHNOLOGY

Ref. nr. 31705 - 60 ml

-70°C Ref. Nr. 45101 – 250 ml Ref. Nr. 77395 – 1 litre Ref. Nr. 77396 – 5 litres Ref. Nr. 77397 – 25 litres Ref. Nr. 77399 – 200 litres

Cleaning and antifreeze product for windshield washer systems. Methanol free.

Properties

Applications

• Neutralizes bad smells by means of a chemical reaction with their molecules. • Instantly removes bad smells like cigarette smoke, pet smell, body odours, garbage, onion, garlic, food smells, spilled food, vomit, smell of mildew and damp, wet clothing. • Long lasting effect by means of the molecular technology, which neutralizes the smell molecules. • Does not mask the smell, but eliminates it. • Due to the fine nebulization with the Wynn’s Aircomatic® the entire space is treated.

• Passenger compartments of cars, trucks, buses, boats, ... • Home: kitchen, pets, carpet, laundry room, ... • Workplace: office, restaurant, lab, workshop, ...

Aircomatic®III Properties

Patent pending

Ref. nr. 68480

• Protects the screen-wash system against freezing up to a temperature of -70°C. • Does not attack paint or rubber. • Leaves no white marks on the bodywork.

Applications • Add the product pure or diluted to the tank of the washer system.

Properties • Easy to use, no supervision necessary during treatment. • Double function: Function 1: Clean and remove bad smells from air-conditioning • Ultrasonic cell nebulizes the liquid Airco-Clean® into small drops of < 5 micron. • The outlet tube directs the vapour flow Function 2: Remove bad smells from vehicle interior • An ozone generator produces ozone, to neutralize bad smells in cars and rooms • After the ozone treatment, the equipment automatically nebulizes Wynn’s Air Purifier • Wynn’s Air Purifier enhances disinfecting power of remaining ozone and accelerates its natural decomposition to speed up safe re-entry

Directions • See label.

Application: Temp. Parts Screen- wash (773) -70°C Pure -34°C 2 -23°C 1 -12°C 1 -8°C 1

14

Parts water

• Air-conditioning systems and interiors in cars, trucks and buses.

Directions 1 1 2 3

• See manual.

Wynn’s Airco-Clean® and Air Purifier are composed of non-toxic and non-irritating components.

For further information:

See Safety and Technical Data Sheet.

15

Automatic Transmission Service

Fuel Service

Wynn’s TranServe™ changes the ATF in automatic gearboxes and cleans the transmission without dismantling.

Modern high performance fuel systems are highly tuned and therefore more susceptible to the negative effects of chemical reactions in the fuel. This can lead to fouling of the fuel system and other problems. Older vehicles experience problems to obtain the correct air/fuel ratio and combustion efficiency due to accumulation of deposits in the fuel system. Wynn’s FuelServe™ is an apparatus for the effective cleaning of injection systems for petrol and diesel engines without disassembly, using Injection System Purge (ISP) for petrol engines and Diesel System Purge (DSP) for diesel engines. A service with Wynn’s FuelServe™ restores optimal engine performance and driving comfort of your customers vehicle!

TranServe™ Ref. Nr. 68414

Properties

Applications

• Cleans the oil system of automatic gearboxes and restores good operation. • Changes up to 90% of the old ATF (with the conventional method, up to 50% of the old ATF remains behind). • Easy connection and operation. • Adapters for all types of non-US cars. • Optional adapters for US cars available.

• Recommended when changing the ATF of automatic gearboxes or when experiencing shifting problems.

FuelServe™

Directions

Ref. nr. 68403

• See manual.

Cleaning and changing without dismantling

Automatic Transmission Treatment – Ref. Nr. 64544 – 325 ml Automatic Transmission Flush – Ref. Nr. 64401 – 325 ml

Power Steering Service Wynn’s Power Steering Serve™ thoroughly cleans the power steering system and changes the fluid without dismantling.

Power Steering Serve™ Ref. Nr. 68413

Properties

Applications

• Cleans the power steering system by changing the oil without dismantling. • Changes up to 90% of the old power steering fluid (with the conventional method, up to 50% of the old power steering fluid remains behind). • Assures and restores good operation of the steering servo system. • Helps to prevent premature failure of newly fitted power steering racks by removing swarf and contamination.

• Recommended when changing the fluid in the power steering system. • Recommended before changing a power steering rack or pump.

Applications

• Cleans the injection system of petrol and diesel engines without dismantling. • Easy to connect and easy handling. • Fluid delivery can be adjusted to the degree of fouling and engine displacement. • Operates via the vehicle's battery (12 V). • When the treatment is completed, automatic stop and an alarm is activated. • Provided with complete set of adapters for European market.

• Can be connected to all petrol injection systems (K, KE, L, LE, LH, Motronic, Monojetronic, Renix, direct injection, etc.) and diesel engines (prechamber and direct injection, common rail, injection-pump unit).

Directions • See manual.

ISP-Injection System Purge Ref. Nr. 76695 - 1 litre

Properties

Applications

• Cleans valves, injectors, combustion chambers and other vital parts in fouled petrol systems of carburettor and injection engines without dismantling. • Frees sticking exhaust valves. • Reduces emissions of noxious exhaust gases. • Restores the injector spray pattern and improves combustion. • Harmless to catalytic converters.

• For all petrol systems of carburettor and injection engines. • Recommended treatment every 20,000 to 30,000 km or when experiencing problems of irregular idling, poor accelerating or excessive exhaust emissions.

Directions • See manual.

DSP-Diesel System Purge

Directions

Ref. Nr. 89195 - 1 litre

• See manual.

Power Steering Flush: Ref. Nr. 62411 – 1,9 litres

16

Properties

Power Steering Serve™ Twin-Pack Service kit Ref. Nr. 10176 Power Steering Flush & Power Steering Fluid & Conditioner

Properties

Applications

• Cleans injectors, pump and combustion chambers. • Restores the injector spray pattern and improves combustion. • Reduces emissions of noxious exhaust gases and soot. • Harmless to catalytic converters.

• For all diesel injection systems of cars and trucks with or without turbocharger. • Recommended treatment every 20,000 to 30,000 km or when experiencing problems of fouled injectors, heavy black smoke, irregular idling, bad acceleration, etc.

Directions • See manual.

For further information:

See Safety and Technical Data Sheet.

17

Cooling System Service Cooling system problems, such as leaks and insufficient cooling due to fouling of the system, are the primary cause of vehicle break down. Wynn’s CoolingServe™ provides a fast and efficient method of cleaning and refilling the complete cooling system.

CoolingServe™ Ref. Nr. 68401

Properties

Applications

• Changes up to 95% of the old cooling liquid (with the conventional method, up to 40% of the old cooling liquid remains behind). • Works fast and easy. • Prevents fouling of new cooling liquid by old contaminated liquid. • Prevents wear of the cooling system parts (pump, engine block, radiator, thermostat). • Operates independently via a 12-volt power source (vehicle's battery). • A set of adapters makes it possible to connect to every type of car. • Mounting the adapter: a few minutes.

• All engines equipped with a "water" cooled system.

After-Sales Programmes & Equipment

Directions • See manual.

Cooling System Stop Leak - Ref. nr. 45644 - 325 ml Cooling System Flush - Ref. nr. 45944 - 325 ml

Wynn’s Serve Plus after-sales programmes offer professional equipment and chemical solutions that ensure the optimal operation and driving comfort of all vehicle systems.

Brake Service A time-saving solution for a complete brake system exchange! Wynn’s BrakeServe™ exchanges the brake fluid in a fast and easy way, at all four wheels simultaneously. Wynn’s Brake Fluid Easy Check is a handy testing device to check the boiling point of brake fluids and indicates if it needs to be changed.

Wynn’s Serve Plus after-sales programmes are designed to: • offer a customer solution that is efficient and affordable • introduce easy-to-operate treatments that are time- saving for technicians • seriously increase service departments profits • offer technical helpline service • supply full training for the service staff • focus on customer satisfaction and customer retention by supplying on-going after-sales support

Wynn’s Serve Plus product services include: • fuel system service • air treatment • automatic transmission service • power steering service • brake service • cooling system service

BrakeServe™ Ref.nr. 68415

Properties • Provides a complete brake system fluid exchange in one application. • Individual or simultaneous bleeding of all four wheel cylinders with individual colour coded toggle switches. • Fast and easy exchange method, user friendly.

18

Applications • All moisture and air are eliminated from the brake system. • Extends life of brake system components. • Provides optimal functioning of the brakes at all times.

• For all hydraulic brake systems of cars and light trucks, conventional and ABS systems.

Directions See manual

For further information:

See Safety and Technical Data Sheet.

19

Wynn’s Belgium bvba Industriepark West 46 B-9100 Sint-Niklaas / Belgium Tel: 32-3-766.60.20 Fax: 32-3-778.16.56 www.wynns.eu [email protected] Wynn’s Automotive France S.A.S. Z.A. EUROPARC, 2, av. Léonard de Vinci F-33608 Pessac Cedex Tel.: 05 57 26 29 00 Fax: 05 57 26 70 60 www.wynns.fr [email protected] Wynn Oil UK Unit 3, Shipton Way, Express Business Park, Northampton Road, Rushden NN10 6GL Tel : 0870 458 0808 [email protected] www.wynns.uk.com

08/2010 WM9500 © 2010 Illinois Tool Works Inc.

Wynn’s in Deutschland Tel.: 00-80025525550 (frei) Fax: 00-80025525551 (frei) [email protected] www.wynns.de Wynn’s Italia S.r.l. Via G. Rossa 31 I-51037 Montale Pistoia Tel.: 0573-9573 Fax: 0573-951210 www.wynns.it [email protected] Wynn’s in Nederland Tel.: 00-80025525550 (gratis) Fax: 00-80025525551 (gratis) [email protected] www.wynns.nl Wynn’s in België / en Belgique Tel.: 03 780 96 59 Fax: 03 780 96 79 [email protected] www.wynns.be