Products 2012

Electrical Engineering

LEIPOLD GRoup

CONTENTS

Contents Leipold Group Introduction by Dr Karl-Heinz Schiefer........................ Page 3 Market leader rooted in tradition .............................. Page 4 Our services ......................................................... Page 6 Professional partner for product development ............. Page 8 Products Main line branch terminals...................................... Page 12 Distribution blocks................................................. Page 22 Conductor-connection terminals .............................. Page 28 Feed in terminals................................................... Page 30 Busbars / phase rails ............................................... Page 34 Appendix Leipold Group sites................................................. Page 40 Ordering options.................................................... Page 42 GTCs.................................................................... Page 46

PAGE 2

INTRODUCTION

LEIPOLD GRoup

Dr KARL - HEINZ SCHIEFER Chairman of the Board

“The Leipold Group provides custom-made solutions for the electrical engineering industry. The core of our wide product range comprises innovative proprietary developments that supplement our customers’ portfolios in exactly the right places.”

Dear Business Partners! For nearly 100 years, the Leipold Group has been synonymous with the development and production of metal precision components of the highest quality; nevertheless, this new catalogue is something truly special. For the first time, we are presenting you with an extensive overview of electrical-engineering parts that we have developed ourselves. The full spectrum of our products ranges from main line branch terminals with a particularly narrow width and distribution blocks for power supply and branch cabling, through to myriad terminals and terminal blocks. By depicting the energy-distribution parts here, it is our intention to provide you with a full range of ideas that do not form part of your direct development focus. As such, our product offering is not in competition with your own products; rather, we see ourselves as a partner with the capacity to supplement your portfolio efficiently at the relevant places when required. As a make-to-order manufacturer, this is particularly valuable where a limited number of units is required and the critical mass needed for profitable business activity is not reached. It is precisely here that we bundle orders, increase the batch sizes and in this way achieve a reduction in unit costs. The items shown in this product catalogue are available to you as stocked goods. In the future, we will be at the disposal of the electrical engineering industry as a partner for development, production and logistical added-value services. Irrespective of whether you opt for products from the catalogue or for custom-made solutions: products of the highest quality are, and have always been, our maxim! The Leipold Group manufactures without exception in Germany and the USA, and is certified as per ISO 9001:2008, ISO 14001:2004 and ISO/TS 16949:2009. More­ over, as we have several production sites with more than 250 automated production units collectively, we guarantee high degrees of both delivery speed and reliability worldwide. Our sales team, led by Mr Dirk Niestrat, welcomes any further enquiries you may have. Let us meet your special requirements!

Dr Karl-Heinz Schiefer Chairman of the Board

PAGE 3

LEIPOLD GRoup

MARKET LEADER ROOTED IN TRADITION

Market Leader Rooted in Tradition WE OFFER YOU AN EXTENSIVE PORTFOLIO OF PRECISION COMPONENTS FOR THE ELECTRICAL ENGINEERING INDUSTRY AND HAVE SUPPLEMENTED OUR PRODUCTS OFFERING WITH INNOVATIVE MAIN LINE BRANCH TERMINALS AND DISTRIBUTION BLOCKS Internationally, the Leipold Group is among the

terminals, distribution blocks, plug connectors,

leading manufacturers of precision components

plug sockets, terminal clamps, box terminals, and

for the electrical engineering industry. From

special terminals, as well as terminal blocks and

energy distribution and automation to electrical

binding posts. Moreover, as a partner of the elec-

installation technology for buildings, our parts

trical engineering industry, Leipold has the entire

are used in virtually all sectors of this industry.

gamut of added value covered – from develop-

Individual companies benefit above all from

ment and production to logistics. The Leipold

the breadth and depth of our range of serv-

Group specialises in products that do not form

ices: Leipold’s product portfolio encompasses

part of the development focus of its customers.

electrotechnical parts such as main line branch

Surface processing / finishing of terminals

Cutting of electrotechnical parts on proprietary building machines

Equipping of machines with brass rods

Milestones 1927 Relocation of the plant (production and administration) to Wolfach 1960

Start of proprietary machine-building

1983

Transfer of production within Wolfach (current site)

1987

First CNC Machine

1994

Acquisition of Hora-Werk GmbH, with its head office in the Westphalian city of Bünde

1999

Start of production in the USA at Leipold Inc.

2000

Integration of Ferdinand Täfler GmbH & Co KG (Dransfeld) into the group

2007 In addition to the certifications as per ISO 9001 and ISO 14001, Leipold obtains certification as per ISO/TS 16949 2009 Leipold has been in existence for 90 years and is among the oldest turneries in Germany 2009 With Pascal Schiefer, the founder’s great-grandchild, the fourth generation takes over management of the corporation at the parent plant in Wolfach 2010 Holistic solutions-provider for the industry with both its proprietary manufacturing of parts and offering of added-value services 2011 Opening China Front Desk, Shanghai – in cooperation with Taichi Automotive Co., Ltd. PAGE 4

MARKET LEADER ROOTED IN TRADITION

The historic roots of the Leipold Group

have already been manufactured for decades.

extend as far back as 1919. In that year,

With this catalogue, Leipold is presenting for

mechanic Carl Leipold (Dr Karl-Heinz

the first time a selection of proprietary parts

­Schiefer’s grandfather) acquired three

for electrical distribution. A range of innova-

production machines with his savings and

tive main line branch terminals and distri-

founded a turnery in Nußbach, Triberg.

bution blocks forms the main focus here.

Today, the group is among the leading manu-

With its new series, Leipold is offering advanced

facturers of precision components for the elec-

solutions that do not form part of its customers’

trical engineering industry worldwide. Right

development focus and are therefore not in

from the start, product quality has been the

competition with its customers’ product port-

core of its corporate philosophy: the Leipold

folios. Instead, Leipold has positioned itself

Group manufactures exclusively in Germany and

as a partner with the capacity to supplement

the USA, and is certified in accordance with ISO

its customers’ portfolios efficiently at stra-

9001:2008, ISO 14001:2004 and ISO/TS 16949:2009.

tegic points when required. This is of prime

Moreover, by virtue of its various produc-

importance where a limited number of units

tion sites with more than 250 production units

is required and the critical mass needed for

collectively, high degrees of both delivery speed

profitable business activity cannot be attained.

LEIPOLD GRoup

and reliability worldwide can be guaranteed. Furthermore, the electrical engineering A further strength of the group is the extent of

industry benefits from the depth of the

its product portfolio. In the field of electrical-

Leipold portfolio: in addition to development

connection technology, terminals with different

and production, companies in this particular

wire-hole shapes as well as custom-made

industry also have access to extensive added-

terminal rails as per the customer’s ­requirements

value services in the area of logistics.

Advantages for the electrical engineering industry 2 Globally, one of the leading manufacturers of precision components for the electrical engineering industry 2 Extensive product range of parts for the field of connection technology, installations technology for buildings, and automation 2 High degree of service-provision depth, from development and production to logistics 2 High degrees of both delivery speed and reliability owing to the 250 + automated production units at the various sites 2 The group manufactures exclusively in Germany and the USA 2 Certification as per ISO 9001:2008, ISO 14001:2004 and ISO/TS 16949:2009

PAGE 5

LEIPOLD GRoup

OUR SERVICES

From Development Partnership to Distribution Logistics CUSTOMERS OF THE LEIPOLD GROUP BENEFIT FROM AN EXTENSIVE ADDED-VALUE PRODUCT OFFERING AND THE CONTINUAL EXPANSION OF THE GROUP’S SERVICES AND PERFORMANCE

Owing to global competition, many industry corporates are

In addition to the pure manufacture of precision metal

concentrating on their core competencies. As a result, in the

components, Leipold has attained specialisation in the

peripheral areas of the central domains of business, development

manufacture of complete metal and plastic assembly

activities are being curbed, production processes reduced, and

units. In this respect, the group has, for example, devel-

storage capacities slimmed down. In contrast to these changes,

oped a range of main line branch terminals and distribu-

outsourcing and company partnerships are becoming increas-

tion blocks for the electrical engineering industry.

ingly significant. For this reason, the Leipold Group has continually expanded its spectrum of services and performance over the

To ensure that its customers receive the greatest possible benefits,

past few years, so that customers may benefit from an extensive

Leipold is already offering support in the development phase by

added-value chain - without having to reproduce one them-

way of its own team of experts. In cooperation with the customer’s

selves with their own personnel or their own machinery.

own engineers, construction plans are optimised, value analyses carried out or quality standards for individual parts defined, for

Today, the Leipold Group’s services portfolio ranges from the devel-

example. In this way the cross-company development partner-

opment of individual products and assembly units as well as the

ship becomes a deciding factor in the increase of product value,

construction of tools and prototypes, right through to production.

while at the same time achieving a reduction in unit costs.

The range of services is rounded off by a multitude of logistical services which enable the Leipold Group to provide a rapid and

The logistical services offered by the Leipold Group comprise, in

needs-based delivery service of individual products worldwide.

addition to development and production, the third focal point

In so doing, the interests of the group’s customers always follow a

of its services portfolio. Here, emphasis is placed above all on

guiding economic principle: cost reduction through the outsourcing

the seamless integration of those precision components manu-

of economically inefficient processes in their supply chains.

factured by Leipold into the customer’s own production chain. For this reason, the distribution logistics are organised according

It is above all those products that lie outside the focus of a

to the “Kanban Principle” so that the group can guarantee a

particular company’s development that are coming under close

global, “just-in-time” delivery of its products to several sites

scrutiny in many companies. Likewise, the manufacture of parts

simultaneously. In this regard, Leipold can also take over the

that do not promise a sufficient return owing to insufficient

packing, packaging and commissioning of products. Moreover,

quantities is also being called into question. The Leipold Group’s

the continued processing – and even assembly – of the indi-

comprehensive services portfolio is aimed precisely at these areas.

vidual products and parts are possible at the customer’s request.

It is possible for single orders or full production assignments to be taken over by the group depending on what is required.

PAGE 6

OUR SERVICES

LEIPOLD GRoup

Development / Engineering 2 Internal team of engineers and developers 2 Powerful and efficient CAD systems 2 Extensive value analyses

Production 2 Established, well-founded knowledge of materials and manufacturing 2 Fast, smooth production in line with the customer’s standards 2 Construction of proprietary tools and machines 2 Incorporation of our production into the customer’s process chain

Logistics 2 Distribution logistics based on the “Kanban Principle” 2 Packing, packaging, commissioning 2 Online control through customer information system 2 Contract logistics including assembly and further processing

PAGE 7

LEIPOLD GRoup

DEVELOPMENT

Professional Partner for Product Development AN EXPERIENCED TEAM OF EXPERTS ADVISES YOU FROM THE FIRST IDEA, THROUGH THE STAGE OF PRODUCT DEVELOPMENT, RIGHT UP TO THE START OF PRODUCTION.

An increasing number of companies require professional support in the development and optimisation of electrotechnical components. Regardless of whether a portfolio needs to be supplemented with innovative items or whether standard products require reworking on the basis of new standardisation regulations, the Leipold Group lends its support to companies in the electrical engineering industry as an experienced partner. In so doing, the group’s customers benefit from the know-how of the many heads comprising a team of experts as well as from a broad network of specialists. There are a number of reasons for companies to cut back on their own development activities and rely on development partnerships instead. With regard to smaller unit quantities in particular, the outsourcing of both development tasks and the subsequent manufacturing processes is becoming increasingly important to create financial and personnel-related latitude. It is at this crucial point of intersection of “make or buy” that Leipold’s development team comes into play, dispensing advice to customers in the electrical engineering industry who are at a variety of starting points:

2 Product life cycle: A product is at the end of its life cycle and needs to be modified or replaced with a product novelty. 2 Tendering: A company wishes to take part in a tender process, but currently has neither the financial nor the staffing means to meet the required criteria. 2 Changes to standards: Changes to mandatory provisions force a company to modify various ­products within its range. 2 Small production runs: Within a particular product area, the quantity produced has decreased so dramatically, that it is no longer economically viable for the company to do its own production run in said area. 2 Variety of ideas: There are numerous product ideas within a company that cannot be implemented without external support in the areas of development and production. 2 Competition: The competition has included an innovative product in its portfolio, as a result of which a company is sustaining significant losses in its market share.

PAGE 8

The Leipold Group’s team of engineers and developers is accessible right from the beginning of these important issues. From the CE (civil engineering) stage and optimisation of the construction plans right through to batch production, you can rely on us to meet all your demands. As such, within the framework of a development partnership and as a holistic solutions-provider, we do not offer individual solutions, but rather an all-encompassing service package:

2 CE (civil engineering) stage 2 CAD systems 2 Toolmaking 2 Stamping technology 2 Plastics technology 2 User-friendly design 2 Pilot production 2 Batch production 2 Quality management 2 VDE, UL certifications etc. 2 Tests such as high-voltage, tensile and pendulum tests 2 Tailor-made packaging

PAGE 9

Our Products Main line Branch Terminals Version ‘C’ (all side finger-safe)

from page 12

Version ‘A’

from page 18

Distribution Blocks

from page 22

Conductor-connection Terminals

from page 28

Feed in Terminals

from page 30

Busbars / Phase Rails

from page 34

Products

PAGE 12

Main line Branch Terminals

Main line Branch Terminals

Products

Main line branch terminals (HLAKs)

Dome design avoids the loss of screws

Modular system: all series are stackable and combinable acc. to customer requirements

PRODUCT ADVANTAGES 2 Cost savings based on the optimised brass body and simplified screw installation 2 All HLAK series can be combined with one another as required owing to their identical design 2 Dome technology avoids the loss of screws located in the plastic housing 2 No torque losses thanks to use screws without brake 2 Very narrow width, the 25 mm² design for the first time on the market compatible with the width of automatic circuit breakers 2 User-friendly design because of rounded edges (protected design patent) 2 Self-extinguishing and halogen-free plastic housing

INSTALLATION ADVANTAGES 2 Modular system: stackable horizontal installation on 35 mm DIN rail as required 2 HLAK (1-pole) with adapter plate can also be installed vertically, multipole extension possible

Adapter plate

Installation on adapter plate

Adapter plate installed vertically upon DIN rail

Service 2 Individual brand-labelling (customer logo) possible on request 2 Marking of packaging (labelling) can be adapted to customer’s requirements 2 Delivery in customer-specific industrial packaging or in standard packaging units

CERTIFICATION + DIRECTIVES 2 All HLAKs fulfil the EC Directive on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (RoHS) 2 VDE Certification as per DIN VDE 0603-2 Version ‘C’ (all side finger-safe)

PAGE 13

Products

Main line Branch Terminals

Main line branch terminals (HLAKs) 2 Version ‘C’- (all side finger-safe), stackable

HLAK 25 // 1-pole

HLAK 25 // 3-pole

% 1-pole, stackable

% 3-pole, stackable

% each with 2 connecting points, 2 × 25 mm² // 2 × 16 mm²

% each with 2 connecting points, 2 × 25 mm² // 2 × 16 mm²

% Modular system: stackable horizontal installation on 35-mm DIN rail as required, can also be combined with the HLAK 35 With adapter plate also vertically mountable and multipole expandable (up to 5 poles).

% can be installed both vertically and horizontally on a 35-mm DIN rail; additional poles can be added through alignment with 1-pole HLAK 25 or HLAK 35 single terminals

Type

Extremely narrow width, identical to the width of an automatic circuit breaker

Extremely narrow width, the width of each pole being identical to that of an automatic circuit breaker

Installation

Rapid horizontal installation on 35-mm DIN rail as per EN 60715 (formerly EN 50022) Vertical installation with adapter plate 080000-0-0 possible

Rapid horizontal and vertical installation on 35-mm DIN rail as per EN 60715 (formerly EN 50022) possible

Remarks



The product complies with the EC’s RoHS Directive.

Standards



VDE Certification as per DIN VDE 0603-2

Materials



Terminal body: Housing: Screws:

Flame Retardancy

brass (CuZn39Pb2) PA 6 steel Self-extinguishing

Mechanical Values



Dimensions

Width × height × depth: 24.8 × 42.5 × 55.4 mm Height from DIN rail: 37.9 mm Width*: 17.8 mm

Wire-stripping lengths: Screw heads:

25 mm² – 19 mm; 16 mm² – 19 mm cross-head screw: +/- PZ2 Width × height × depth: 60.8 × 43.5 × 59.5 mm Height from DIN rail: 37.9 mm Width*: 53.8 mm

Nominal Voltage

AC 690 V

Current-carrying capacity

100 A

Connection Cross Sections (per pole)

Accessories

Model

without surface treatment halogen-free zinc-plated, thick-film passivated

2 × 25 mm²

2.5 – 25 mm², round conductor (single-wire and multi-wire) 1.5 – 16 mm², fine-wire with wire-end sleeve

2 × 16 mm²

2.5 – 16 mm², round conductor (single-wire and multi-wire) 1.5 – 10 mm², fine-wire with wire-end sleeve

Adapter plate, article no. 080000-0-0

Item no.

Model

080110-0-4

L

Colour combination**

Pack size

GTIN (EAN)

Item no.

Model

5

4051589801102

080130-0-4

3L

Colour combination**

GTIN (EAN)

1

4051589801300

080110-1-4

N

5

4051589801119

080130-1-4

L / N / PE

1

4051589801317

080110-2-4

PE

5

4051589801126

080130-2-4

PE / L / N

1

4051589801324

080110-3-4

L

5

4051589801133

080130-3-4

2L / N

1

4051589801331

080110-4-4

L

5

4051589801140

080130-4-4

2L / PE

1

4051589801348

L = light grey RAL 7035, clay brown RAL 8003, jet black RAL 9005; N = light blue RAL 5012; PE = yellow-green RAL 6018 * Width in multipole installations | **Colour of basic housing – light grey RAL 7035

PAGE 14

Pack size

Main line Branch Terminals

Products

Main line branch terminals (HLAKs) 2 Version ‘C’- (all side finger-safe), stackable

HLAK 25 // 4-pole

HLAK 25 // 5-pole

% 4-pole, stackable

% 5-pole, stackable

% each with 2 connecting points, 2 × 25 mm² // 2 × 16 mm²

% each with 2 connecting points, 2 × 25 mm² // 2 × 16 mm²

% can be installed both vertically and horizontally on a 35-mm DIN rail; additional poles can be added through alignment with 1-pole HLAK 25 or HLAK 35 single terminals

% can be installed both vertically and horizontally on a 35-mm DIN rail; additional poles can be added through alignment with 1-pole HLAK 25 or HLAK 35 single terminals

Type



Extremely narrow width, the width of each pole being identical to that of an automatic circuit breaker

Installation



Rapid horizontal and vertical installation on 35-mm DIN rail as per EN 60715 (formerly EN 50022) possible

Remarks



The product complies with the EC’s RoHS Directive.

Standards



VDE Certification as per DIN VDE 0603-2

Materials



Terminal body: Housing: Screws:

Flame Retardancy

brass (CuZn39Pb2) PA 6 steel Self-extinguishing

Mechanical Values



Dimensions

Width × height × depth: 78.6 × 43.5 × 59.5 mm Height from DIN rail: 37.9 mm Width*: 71.6 mm

Wire-stripping lengths: Screw heads:

25 mm² – 19 mm; 16 mm² – 19 mm cross-head screw: +/- PZ2 Width × height × depth: 96.4 × 43.5 × 59.5 mm Height from DIN rail: 37.9 mm Width*: 89.4 mm

Nominal Voltage

AC 690 V

Current-carrying capacity

100 A

Connection Cross Sections (per pole)

Model

without surface treatment halogen-free zinc-plated, thick-film passivated

2 × 25 mm²

2.5 – 25 mm², round conductor (single-wire and multi-wire) 1.5 – 16 mm², fine-wire with wire-end sleeve

2 × 16 mm²

2.5 – 16 mm², round conductor (single-wire and multi-wire) 1.5 – 10 mm², fine-wire with wire-end sleeve

Item no.

Model

080140-0-4

Colour combination**

Pack size

GTIN (EAN)

Item no.

Model

Colour combination**

Pack size

GTIN (EAN)

4L

1

4051589801409

080150-0-4

5L

1

4051589801508

080140-1-4

3L / N

1

4051589801416

080150-1-4

3L / N / PE

1

4051589801515

080140-2-4

N / 3L

1

4051589801423

080150-2-4

N / 3L / PE

1

4051589801522

080140-3-4

3L / PE

1

4051589801430

080150-3-4

PE / 3L / N

1

4051589801539

080140-4-4

PE / 3L

1

4051589801447

080150-4-4

PE / N / 3L

1

4051589801546

L = light grey RAL 7035, N = light blue RAL 5012; PE = yellow-green RAL 6018 * Width in multipole installations | **Colour of basic housing – light grey RAL 7035

PAGE 15

Products

Main line Branch Terminals

Main line branch terminals (HLAKs) 2 Version ‘C’- (all side finger-safe), stackable

HLAK 35 // 1-pole

HLAK 70 // 1-pole

% 1-pole, stackable

% 1-pole, stackable

% each with 2 connecting points, 2 × 35 mm² // 2 × 25 mm²

% each with 2 connecting points, 2 × 70 mm² // 2 × 50 mm²

% Modular system: stackable horizontal installation on 35-mm DIN rail as required, can also be combined with the HLAK 25 With adapter plate also vertically mountable and multipole expandable (up to 5 poles).

% Modular system: stackable horizontal installation on 35-mm DIN rail as required, can also be combined with the HLAK 25 and HLAK 35

Type

Optimised width

Installation

Rapid horizontal installation on 35-mm DIN rail as per EN 60715 (formerly EN 50022) Vertical installation with adapter plate 080000-0-0 possible

Remarks



The product complies with the EC’s RoHS Directive.

Standards



VDE Certification as per DIN VDE 0603-2

Materials



Terminal body: Housing: Screws:

Flame Retardancy

Rapid installation on 35-mm DIN rail as per EN 60715 (formerly EN 50022)

brass (CuZn39Pb2) PA 6 steel

without surface treatment halogen-free zinc-plated, thick-film passivated

Self-extinguishing

Mechanical Values

Wire-stripping lengths: 35 mm² – 22 mm; 25 mm² – 18 mm Screw heads: cross-head screw: +/- PZ2

Wire-stripping lengths: 70 mm² – 22 mm; 50 mm² – 18 mm Screw heads: Allen screw (hexagonal socket): 5 mm

Dimensions

Width × height × depth: 28.9 × 42.5 × 55.4 mm Height from DIN rail: 37.9 mm Width*: 21.9 mm

Width × height × depth: 37.8 × 46.5 × 63 mm Height from DIN rail: 41.9 mm Width*: 30.7 mm

Nominal Voltage

AC 690 V

Current-carrying capacity

125 A

Connection Cross Sections (per pole)

2 × 35 mm²

4 – 35 mm², round conductor (single-wire and multi-wire) 2.5 – 25 mm², fine-wire with wire-end sleeve

2 × 25 mm²

2.5 – 25 mm², round conductor (single-wire and multi-wire) 2 × 50 mm² 1.5 – 16 mm², fine-wire with wire-end sleeve

Accessories

Model

175 A 2 × 70 mm²

10 – 70 mm², round conductor (single-wire and multi-wire) 6 – 50 mm², fine-wire with wire-end sleeve 6 – 50 mm², round conductor (single-wire and multi-wire) 4 – 35 mm², fine-wire with wire-end sleeve

Adapter plate, article no. 080000-0-0

Item no.

Model

080210-0-4

L

Colour combination**

Pack size

GTIN (EAN)

5

4051589802109

080210-1-4

N

5

4051589802116

080210-2-4

PE

5

4051589802123

080210-3-4

L

5

4051589802130

080210-4-4

L

5

4051589802147

If you are interested in purchasing this product, please contact our sales department!

L = light grey RAL 7035, clay brown RAL 8003, jet black RAL 9005; N = light blue RAL 5012; PE = yellow-green RAL 6018 * Width in multipole installations | **Colour of basic housing – light grey RAL 7035

PAGE 16

Main line Branch Terminals

Products

PAGE 17

Products

Main line Branch Terminals

Main line branch terminals (HLAKs) 2 Version ‘A’ HLAK 25 // 1– 5 pole

% Incoming terminal 2 × 25 mm² % Outgoing terminal 16 mm² % outgoing terminals on both sides Type

“open” incoming termial due to slidetechnology

Installation

Rapid horizontal and vertical installation on 35-mm DIN rail as per EN 60715 (formerly EN 50022) possible

Remarks

The product complies with the EC’s RoHS Directive.

Standards

VDE Certification as per DIN VDE 0603-2

Materials

Terminal body: Housing: Screws:

Dimensions

without surface treatment zinc-plated, thick-film passivated

Wire-stripping lengths: Incoming 25 mm² – 17 mm; outgoing 16 mm² – 15 mm Screw heads: cross-head screw: +/- PZ2 Item No.

a

b

c

d

Item No.

a

b

c

d

081110-0-4

32.5

50

40

46

081140-2-4

121

50

40

46

081110-1-4

32.5

50

40

46

081140-3-4

150.5

50

40

46

081110-2-4

62

50

40

46

081140-4-4

150.5

50

40

46

081120-0-4

62

50

40

46

081140-5-4

150.5

50

40

46

081140-0-4

121

50

40

46

081150-0-4

150.5

50

40

46

081140-1-4

121

50

40

46

b

Mechanical Values

brass (CuZn39Pb2) PC steel

c d

a

all dimensions in mm

Nominal Voltage

AC 500 V

Current-carrying capacity

80 A

Connection Cross Sections

25 mm²

2.5 – 25 mm², round conductor (single-wire and multi-wire); 1.5 – 16 mm², fine-wire with wire-end sleeve

16 mm²

2.5 – 16 mm², round conductor (single-wire and multi-wire); 1.5 – 10 mm², fine-wire with wire-end sleeve

Accessories

Models

Cover section, for type A terminals, 1 m long, article no. 081000-0-4

Item No.

pole no.

Type inserts / outgoing terminals

Pack size

GTIN (EAN)

Item No.

pole no.

Type inserts / outgoing terminals

081110-0-4

1

1 / 2

1

4051589811101

081140-2-4

4

4 / 4

081110-1-4 081110-2-4

1

1 / 4

1

4051589811118

081140-3-4

4

1

1 / 6

1

4051589811125

081140-4-4

4

081120-0-4

2

2 / 2

1

4051589811200

081140-5-4

4

081140-0-4

4

4 / 2

1

4051589811408

081150-0-4

5

081140-1-4

4

3 / 2; 1 / 4

1

4051589811415

*Colour of basic housing – light grey RAL 7035

PAGE 18

Colour*

Pack size

GTIN (EAN)

1

4051589811422

3 / 2; 1 / 6

1

4051589811439

3 / 4; 1 / 6

1

4051589811446

3 / 4; 1 / 12

1

4051589811453

5 / 2

1

4051589811507

Colour*

Main line Branch Terminals

Products

Main line branch terminals (HLAKs) 2 Version ‘A’ HLAK 35 // 1– 5 pole

% Incoming terminal 2 × 35 mm² % Outgoing terminal 25 mm² // 35 mm² % outgoing terminals on both sides Type

“open” incoming termial due to slidetechnology

Installation

Rapid horizontal and vertical installation on 35-mm DIN rail as per EN 60715 (formerly EN 50022) possible

Remarks

The product complies with the EC’s RoHS Directive.

Standards

VDE Certification as per DIN VDE 0603-2

Materials

Terminal body: Housing: Screws:

Dimensions

without surface treatment zinc-plated, thick-film passivated

Wire-stripping lengths: Incoming 35 mm² – 18 mm; outgoing 25 mm² / 35 mm² – 16 mm Screw heads: cross-head screw: +/- incoming PZ3; outgoing PZ2 Item No.

a

b

c

d

m

n

25 mm² outg.

Item No.

a

b

c

d

m

n –

35 mm² outg.

081210-0-4

40

44

40

44

081310-0-4

40

44

40

44

–

081210-1-4

40

44

40

44

081310-1-4

40

44

40

44

–

–

081220-0-4

77

44

40

44

081320-0-4

77

44

40

44

–

–

081340-0-4

154.5

60

40

46

74

48

081220-1-4

77

44

40

44

081240-0-4

154.5

60

40

46

74

48

081240-1-4

192

60

40

46

74

48

081250-0-4

192

60

40

46

74

48

n b

Mechanical Values

brass (CuZn39Pb2) PC steel

c

m a

all dimensions in mm

d

Nominal Voltage

AC 500 V

Current-carrying capacity

100 A

Connection Cross Sections

35 mm²

4 – 35 mm², round conductor (single-wire and multi-wire); 2.5 – 25 mm², fine-wire with wire-end sleeve

25 mm²

2.5 – 25 mm², round conductor (single-wire and multi-wire); 1.5 – 16 mm², fine-wire with wire-end sleeve

Accessories

Models

Cover section, for type A terminals, 1 m long, article no. 081000-0-4

25 mm² outg.

Item No.

pole no.

Type inserts / outgoing terminals

Pack size

GTIN (EAN)

35 mm² outg.

pole no.

Type inserts / outgoing terminals

081210-0-4

1

1 / 2

1

4051589812108

081310-0-4

1

081210-1-4 081220-0-4

1

1 / 4

2

2 / 2

1

4051589812115

081310-1-4

1

4051589812207

081320-0-4

081220-1-4

2

2 / 4

1

4051589812214

081340-0-4

Colour*

081240-0-4

4

4 / 2

1

4051589812405

081240-1-4

4

3 / 2; 1 / 6

1

4051589812412

081250-0-4

5

5 / 2

1

4051589812504

Item No.

Pack size

GTIN (EAN)

1 / 2

1

4051589813105

1

1 / 4

1

4051589813112

2

2 / 4

1

4051589813204

4

4 / 2

1

4051589813402

Colour*

*Colour of basic housing – light grey RAL 7035

PAGE 19

Products

Main line Branch Terminals

Main line branch terminals (HLAKs) 2 Version ‘A’

HLAK 70 // 1-pole

HLAK 150 // 1-pole

% incoming terminal 2 × 70 mm²

% incoming terminal 2 × 150 mm²

% outgoing terminal 2 × 50 mm²

% outgoing terminal 4 × 70 mm²

% outgoing terminals on both sides

% outgoing terminals on both sides

Type

“open” incoming termial hole due to slidetechnology

“open” incoming termial hole due to slidetechnology

Installation



Directly on installation plate

Remarks



The product complies with the EC’s RoHS Directive.

Standards



VDE Certification as per DIN VDE 0603-2

Materials



Terminal body: Housing: Screws:

brass (CuZn39Pb2) bakelite steel

Flame Retardancy

galv. Ni 3 μ zinc-plated, thick-film passivated

—

Mechanical Values

Wire-stripping lengths: 70 mm² – 29 mm; 50 mm² – 29 mm Screw heads: Incoming: hexagon-slot head 13 mm Outgoing: cross-head screw: +/- PZ2

Wire-stripping lengths: 150 mm² – 49 mm; 70 mm² – 26 mm Screw heads: Incoming: hexagon head 17 mm Outgoing: cross-head screw: +/- PZ3

Dimensions

Width × depth: 58 × 65 mm Height without conductor: 61 mm Height maximal: 78 mm

Width × depth: 69 × 86 mm Height without conductor: 81 mm Height maximal: 105 mm

Nominal Voltage

AC 500 V

Current-carrying capacity

160 A

Connection Cross Sections (per pole)

2 × 70 mm²

10 – 70 mm², round conductor (single-wire and multi-wire) 6 – 50 mm², fine-wire with wire-end sleeve

2 × 150 mm²

70 – 150 mm², round conductor (single-wire and multi-wire) 50 – 120 mm², fine-wire with wire-end sleeve

2 × 50 mm²

6 – 50 mm², round conductor (single-wire and multi-wire) 4 – 35 mm², fine-wire with wire-end sleeve

4 × 70 mm²

10 – 70 mm², round conductor (single-wire and multi-wire) 6 – 50 mm², fine-wire with wire-end sleeve

Model

300 A

Item No.

Model

081510-0-4

—

Colour*

*Colour of basic housing – light grey RAL 7035

PAGE 20

Pack size

GTIN (EAN)

Item No.

Model

1

4051589815109

081810-0-4

—

Colour*

Pack size

GTIN (EAN)

1

4051589818100

Main line Branch Terminals

Products

PAGE 21

PRODUcts

PAGE 22

Distribution Blocks

Distribution Blocks

PRODUcts

Distribution Blocks

Round and flat conductor feed-in

Stackable mountability

Innovative design by virtue of rounded edges

Connecting points for outgoing circuit clearly arranged by cross sections

PRODUCT ADVANTAGES 2 Cost savings based on the optimised brass body and simplified screw installation 2 Visible conductor entry by virtue of innovative stepped design of the brass body 2 Universal feed-in: round or flat conductor 2 Large number of connecting points 2 Connecting points can be extended through stackability and bridging as required 2 Suitable bridges are available as accessory 2 Connecting points for outgoing circuits clearly arranged by cross-section size 2 All phase distribution blocks can be combined with one another as required (modular systems of 1- to 5-poles possible) 2 Very user-friendly due to compact design and rounded edges (protected design patent) 2 Dome technology avoids the loss of screws located in the plastic component 2 No torque losses thanks to use screws without brake 2 Self-extinguishing and halogen-free plastic housing

INSTALLATION ADVANTAGES 2 Rapid installation on 35-mm DIN rail as per EN 60715 2 Phase distribution block (PVB): screwed directly on to the installation plate (distribution cabinet) 2 Sub-distribution block (UVB): multipole block combinations can be installed horizontally and vertically on DIN rail by means of innovative latching mechanism (up from 2-pole combinations)

Service 2 Individual brand-labelling (customer logo) possible 2 Marking of packaging (labelling) can be adapted to customer’s requirements 2 Delivery in customer-specific industrial packaging or in standard packaging units

CERTIFICATION + DIRECTIVES 2 All distribution blocks fulfil the EC Directive on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (RoHS) 2 UVBs have VDE Certification as per DIN EN 60998-2-1 2 PVBs have Certification as per UL 1059

PAGE 23

PRODUcts

Distribution Blocks

Distribution Blocks 2 Step shaped (all side finger-safe), stackable Sub-distribution Block 100 A (UVB 100)

Phase Distribution Block 160 A (PVB 160)

% 1-pole stackable

% 1-pole stackable

% 2 × 25-mm² feed-in connecting points

% combined round and flat conductor feed-in

% 6 × 10-mm² distribution connecting points Type Installation

Step-shaped terminal block (all side finger-safe) Rapid 1-pole horizontal installation on 35-mm DIN rail as per EN 60715 (formerly EN 50022). Horizontal and vertical multipole block combinations (up from 2 poles)

Remarks

The product complies with the EC’s RoHS Directive.

Standards

As per DIN EN 60998-2-1

Materials

Terminal body: Housing: Screws:

As per UL-1059

brass (CuZn39Pb2) PA GF steel

without surface treatment halogen-free zinc-plated, thick-film passivated

Flame Retardancy Mechanical Values

Rapid installation on 35-mm DIN rail as per EN 60715 (formerly EN 50022). Horizontal multipole block combinations. Can be installed directly on installation plate.

Terminal body: Housing: Screws:

brass (CuZn39Pb2) PA 6 steel

galv. Ni 3 – 4 µ halogen-free zinc-plated, thick-film passivated

Self-extinguishing Wire-stripping lengths: 25 mm² – 17 mm; 10 mm² – 9 mm Screw heads:

Wire-stripping lengths: Screw heads:

cross-head screw: +/- PZ2

70 mm² / flat conductor – 17 mm; 25 / 16 mm² – 12 mm Incoming: Allen screw (hexagonal socket) Outgoing: Slot screw

Dimensions

Width × height × depth: 30.5 × 49 × 55.4 mm Height from DIN rail: 45.5 mm Width*: 28 mm

Width × height × depth: 41.6 × 50.4 × 74.5 mm Height from DIN rail: 45.4 mm Width* 40.1 mm

Nominal Voltage

AC 690 V

DIN EN 690 V / UL 600 V

Current-carrying Capacity

100 A

160 A / UL 160 A

Connection Cross Sections

2 × 25 mm²

6 × 10 mm²

Models

2.5 – 25 mm², round conductor (single-wire and multi-wire) 1.5 – 16 mm², fine-wire with wire-end sleeve

1 × 70 mm²

10 – 70 mm², round conductor (single-wire and multi-wire) 6 – 50 mm², fine-wire with wire-end sleeve

There are two terminal screws at the feed connecting points to ensure secure contact

1 × flat con­ ductor

15 × 5 mm

1.5 – 10 mm², round conductor (single-wire and multi-wire) 1.5 – 6 mm², fine-wire with wire-end sleeve

2 × 25 mm²

2.5 – 25 mm², round conductor (single-wire and multi-wire) 1.5 – 10 mm², fine-wire with wire-end sleeve

3 × 16 mm²

2.5 – 16 mm², round conductor (single-wire and multi-wire) 1.5 – 10 mm², fine-wire with wire-end sleeve

Item no.

Model

080010-0-4

Colour **

Pack size

GTIN (EAN)

Item no.

Model

L

3

4051589800105

082060-0-4

—

080010-1-4

N

3

4051589800112

080010-2-4

PE

3

4051589800129

L = light grey RAL 7035, N = light blue RAL 5012, PE = yellow-green RAL 6018 * Width in multipole installations | **Colour of basic housing – light grey RAL 7035

PAGE 24

Colour**

Pack size

GTIN (EAN)

1

4051589206006

Distribution Blocks

PRODUcts

Distribution Blocks 2 Step shaped (all side finger-safe), stackable Phase Distribution Block 250 A (PVB 250)

Phase Distribution Block 400 A (PVB 400)

% 1-pole stackable

% 1-pole stackable

% combined round and flat conductor feed-in

% combined round and flat conductor feed-in

Type Installation

Step-shaped terminal block (all side finger-safe) Rapid installation on 35-mm DIN rail as per EN 60715 (formerly EN 50022). Horizontal multipole block combinations. Can be installed directly on installation plate.

Rapid installation on 35-mm DIN rail as per EN 60715 (formerly EN 50022). Horizontal multipole block combinations. Can be installed directly on installation plate.

Remarks

The product complies with the EC’s RoHS Directive.

Standards Materials

As per UL-1059

Terminal body: Housing: Screws:

Flame Retardancy

brass (CuZn39Pb2) PA GF steel

galv. Ni 3 – 4 µ halogen-free zinc-plated, thick-film passivated

Self-extinguishing

Mechanical Values

Wire-stripping lengths: Screw heads: Incoming: Outgoing:

120 / 185 mm² – 27 mm; flat conductor – 22 mm; 35 mm² – 18 mm; 25 / 16 mm² – 12 mm Allen screw (hexagonal socket) Slot Screw

Dimensions



53.3 × 67 × 94 mm 61.9 mm 51.9 mm

Width × height × depth: Height from DIN rail: Width*:

Nominal Voltage

DIN EN 690 V / UL 600 V

Current-carrying Capacity

250 A / UL 230 A

Connection Cross Sections

1 × 120 mm²

35 – 120 mm², round conductor (single-wire and multi-wire) 25 – 95 mm², fine-wired with wire-end sleeve

1 × 185 mm²

95 – 185 mm², round conductor (single-wire and multi-wire) 70 – 150 mm², fine-wired with wire-end sleeve

1 × flat conductor

24 × 10 mm

1 × flat conductor

24 × 10 mm

Models

400 A / UL 310 A

2 × 35 mm²

4 – 35 mm², round conductor (single-wire and multi-wire) 2.5 – 25 mm², fine-wired with wire-end sleeve

3 × 25 mm²

2.5 – 25 mm², round conductor (single-wire and multi-wire) 1.5 – 16 mm², fine-wired with wire-end sleeve

4 × 16 mm²

1.5 – 16 mm², round conductor (single-wire and multi-wire) 1.5 – 10 mm², fine-wired with wire-end sleeve

Item no.

Model

082080-0-4

—

Colour**

Pack size

GTIN (EAN)

Item no.

Model

1

4051589208000

082090-0-4

—

Colour**

Pack size

GTIN (EAN)

1

4051589209007

* Width in multipole installations | **Colour of basic housing – light grey RAL 7035

PAGE 25

PRODUcts

Distribution Blocks

Distribution Block 2 Al / Cu, Step shaped (all side fingersafe)

Distribution Block VB 500, for large alu wires up to 500 mm² PRODUCT ADVANTAGES 2 Large feed-in for Al / Cu conductor up to 500 mm² 2 Easy installation due to slidetechnology 2 Incoming terminal hole with oxid film breaking “teeth” 2 Outgoing terminal holes for 2 Cu wires up to 240 mm²

% Incoming terminal: 1 × 500 mm² (Al / Cu) % Outgoing terminal: 2 × 240 mm² % finger safe Type

“open” incoming termial hole due to slidetechnology Incoming terminal hole with oxide film breaking “teeth”

Installation

Directly on installation plate

Remarks

The product complies with the EC’s RoHS Directive

Standards

As per DIN EN 60947-7-1, UL-1059

Materials

Terminal body: Housing: Screws:

Flame Retardancy

Self-extinguishing

Mechanical Values

Wire-stripping lengths: 500 mm² – 50 mm; 240 mm² – 55 mm Screw heads: Allen screw (hexagonal socket)

Dimensions

Width × height × depth:

Nominal Voltage

AC 690 V

Current-carrying Capacity

800 A

Connection Cross Sections

1 × 500 mm²

240 – 500 mm², round conductor (single-wire and multi-wire)

2 × 240 mm²

120 – 240 mm², round conductor (single-wire and multi-wire)

brass (CuZn39Pb2) PA 6 steel

without surface treatment halogen-free zinc-plated, thick-film passivated

70 × 119 × 144 mm

Models If you are interested in purchasing this product, please contact our sales department!

PAGE 26

Distribution Blocks

PRODUcts

PAGE 27

PRODUcts

CONDUCTOR-CONNECTION TERMINALS

Conductor-connection Terminals PRODUCT FEATURES 2 Space-saving shape 2 Separate terminal screw for conductor and rail bonding 2 Installation on integrated rail possible 2 Suitable for any rail width by virtue of “open mouth”

Service 2 Marking of packaging (labelling) can be adapted to customer’s requirements 2 Delivery in customer-specific industrial packaging or in standard packaging units

PAGE 28

CONDUCTOR-CONNECTION TERMINALS

PRODUcts

Conductor-connection Terminals 2 General-purpose 5-mm Busbar

10-mm Busbar

% For rails with a strength of 3 – 5 mm

% For rails with a strength of 6 – 10 mm

Torque

2 Nm

Materials

brass (CuZn39Pb2) without surface treatment

Width

8 mm

Incoming

1 × busbar strength (height) 3–5 mm / depth (width) minimum 8 mm

1 × busbar strength (height) 6–10 mm / depth (width) minimum 8 mm

Outgoing

2 × 4 mm²

2 × 4 mm²

Models

1 – 4 mm², circular conductor (single-wire and multi-wire) 1 – 2.5 mm², fine-wire with wire-end sleeve

Item No.

Pack Size

GTIN (EAN)

Item No.

Pack Size

GTIN (EAN)

086050-3-2

15

4051589605038

086100-3-2

15

4051589610032

16 mm2 Busbar Tapping

25 mm2 Busbar Tapping

% All-insulated, touch-safe

% All-insulated, touch-safe

% For rails with a strength of 3 – 10 mm

% For rails with a strength of 3 – 10 mm

Remarks Materials

The product complies with the EC’s RoHS Directive

Terminal body: Casing: Screws:

Flame Retardancy

brass (CuZn39Pb2) bakelite steel

Models

thick-film passivated

690 V 15,2 mm

19 mm

Incoming Outgoing

without surface treatment

Self-extinguishing

Nominal Voltage Width

1 – 4 mm², circular conductor (single-wire and multi-wire) 1 – 2.5 mm², fine-wire with wire-end sleeve

1 × busbar strength (height) 3–10 mm / depth (width) minimum 10 mm 2 × 16 mm²

1.5 – 16 mm², circular conductor (single-wire and multi-wire) 1 – 10 mm², fine-wire with wire-end sleeve

Item No.

Model

086105-0-4

—

Colour

Pack Size

GTIN (EAN)

1

4051589610506

4 × 25 mm²

2.5 – 25 mm², circular conductor (single-wire and multi-wire) 1.5 – 16 mm², fine-wire with wire-end sleeve

If you are interested in purchasing this product, please contact our sales department!

PAGE 29

PRODUCTS

feed in TERMINALS

Feed in Terminals PRODUCT FEATURES 2 Rapid installation 2 Safe bonding by means of screw clamping 2 No special tool necessary for crimping cable lugs 2 Touch safety ensured 2 General-purpose power directions (front / side)   

Service 2 Marking of packaging (labelling) can be adapted to customer’s requirements 2 Delivery in customer-specific industrial packaging or in standard packaging units

PAGE 30

feed in TERMINALS

PRODUcts

Feed in Terminals 2 Fixed Feed 2 × 10 mm², pin

25 mm², fork

% Front feed-in

% Front feed-in

% Front feed-in

% 2 × 10-mm² connecting points

% 2 × 10-mm² connecting points

Connection Cross Section

2 × 10 mm²

2 × 10 mm²

25 mm²

Phases (1…4)

1

1

1

Models

Item No.

2 × 3,25

9,7

20

Colour

084510-2-4

1,3

26

26

2 × 3,25

Dimensions

Pack Size

GTIN (EAN)

Item No.

10

4051589451024

084511-2-4

9,7 Colour

19,5

2 × 10 mm², pin

16

20 Pack Size

GTIN (EAN)

Item No.

10

4051589451123

084130-2-4

Colour

25 mm², pin

50 mm², fork

50 mm², pin

% Front feed-in

% Front feed-in

% Front feed-in

Connection Cross Section

25 mm²

50 mm²

50 mm²

Phases (1…4)

1

1

1

18

Pack Size

GTIN (EAN)

10

4051589413022

Models

Item No. 084530-2-4

Colour

Pack Size

GTIN (EAN)

Item No.

10

4051589453028

084150-1-4

Colour

24,7

Pack Size

GTIN (EAN)

Item No.

3

4051589415019

084550-1-4

27,1

27,1 15

18

2,5 × 6,6

13,5

2,5

19,5

1,3 × 4,2

Dimensions

15

Colour

24,7

Pack Size

GTIN (EAN)

3

4051589455015

PAGE 31

PRODUcts

Feed in TERMINALS

Feed in Terminals 2 Fixed Feed

2 General-purpose Feed 50 mm², pin, long

90 mm², pin, long

25 mm², pin, long

% Front feed-in

% Front feed-in

% Side feed-in (both sides)

% Adjustable pin length

% 4-part set

% Closing device with hinged-lid

Connection Cross Section

50 mm²

90 mm²

25 mm²

Phases (1…4)

1

1

1

Models

Item No.

Colour

084552-1-4

24,7

28

1,3 × 3,8

12 17,5

4 × 6,5

2,5 × 6

27,1

Dimensions

23

Pack Size

GTIN (EAN)

Item No.

3

4051589455213

084570-1-4

18

Colour

34

Pack Size

GTIN (EAN)

Item No.

3 Sets

4051589457019

084531-2-4

20

% Long and short terminal screw for different cross-sections

11,4 15 13,6

Colour

Pack Size

GTIN (EAN)

10

4051589453127

2 General-purpose Feed 50 mm², fork

50 mm², pin

50 mm², pin, long

% Fork pluggable from 3 sides

% Pin pluggable from 3 sides

% Pin pluggable from 3 sides % Adjustable pin length

Connection Cross Section

50 mm²

50 mm²

50 mm²

Phases (1…4)

1

1

1

Models

Item No. 084151-1-4

PAGE 32

Colour

24,7

Pack Size

GTIN (EAN)

Item No.

3

4051589415118

084551-1-4

Colour

24,7

Pack Size

GTIN (EAN)

Item No.

3

4051589455114

084553-1-4

27,1

27,1 15

2,5 × 6

15

2,5 × 6,6

2,5

27,1

Dimension

12 17,5

Colour

24,7

Pack Size

GTIN (EAN)

3

4051589455312

Feed in TERMINALS

PRODUcts

Feed in Terminals 2 Meter Feed in Terminals 3-way, isolated

3-way, isolated

% Pin, 6 × 8 mm

% Pin, 5 × 6 mm

% Front feed-in

% Front feed-in

% 3 connecting points, 16 mm²

% 3 connecting points, 16 mm²

Connection Cross Section

3 × 16 mm²

Phases (1…4)

1

18

Models

Item No. 084590-1-4

Colour

17,5

6× 5

6× 8

17,5

Dimension

12,5

27

Pack Size

GTIN (EAN)

Item No.

3

4051589459013

084591-1-4

Colour

27

Pack Size

GTIN (EAN)

3

4051589459112

PAGE 33

PRODUcts

BUSBARS /PHASE RAILS

Busbars / Phase Rails PRODUCT FEATURES 2 Space-saving shape 2 Fixed allocation of phases 2 “Clean” wiring 2 Rapid installation 2 Modern connection of installation equipment 2 Possibility for adaptation to individual needs 2 Touch-safe after cutting to length and shortening of the busbars 2 End caps and protection against accidental contact available as accessories

Service 2 Additional lengths and divisions possible on request 2 Individual brand-labelling (customer logo) possible 2 Marking of packaging (labelling) can be adapted to customer’s requirements 2 Delivery in customer-specific industrial packaging or in standard packaging units

PAGE 34

BUSBARS /PHASE RAILS

PRODUcts

Busbars / Phase Rails 2 1-phase Phase rails open, for LSS

% Uncuttable, fixed length: 6-, 9-, 12-pole

% Cuttable to desired length

% 1-phase

% 1-phase

% M6 fork

% M6 fork

6,1

17,8

6,1

P1

Item No. GTIN (EAN)

P1

P1

P1

P1

P1

P1

P1

P1

12

17,8

12

Dimensions

Phase rails closed, for LS

P1

P1

P1

P1

P1

P1

P1

P1

P1

085130-0-4

085130-1-4

085130-2-4

085131-9-4

085132-9-4

4051589513005

4051589513012

4051589513029

4051589513197

4051589513296

Cross Section

10 mm²

10 mm²

16 mm²

Rated Current

63 A

63 A

80 A

Poles

6

Module Length Pack Size

9

12

57

17.8 mm 106.2 mm

159.6 mm

17.8 mm 212.0 mm

1016 mm

20

25

—

085920-6-4

Colour End cap (Art. No.)

Further information about the accessories for busbars available on page 31.

PAGE 35

PRODUcts

BUSBARS /PHASE RAILS

Busbars / Phase Rails 2 1-phase

2 2-phase Phase rails open, for LS / D0 items

Phase rails open, for LS

% LS with auxiliary switch % Cuttable to desired length

% Cuttable to desired length

% 1-phase

% 2-phase

% M6 fork

% Pin

17,8

6,1

3,8

12

27

12

Dimensions

P1

P1

P1

Item No.

P1

P1

P1

P1

P1

P1

P2

P1

P2

P1

P2

P1

P2

085161-9-4

085630-9-4

085631-9-4

4051589516198

4051589563093

4051589563192

Cross Section

16 mm²

10 mm²

16 mm²

Rated Current

80 A

63 A

80 A

GTIN (EAN)

Poles

37

56

Module

27 mm

17.8 mm

Length

1016 mm

1016 mm

25

20

Pack Size Colour End cap (Art. No.)

085920-6-4

Further information about the accessories for busbars available on page 31.

PAGE 36

085910-2-4

085921-2-4

BUSBARS /PHASE RAILS

PRODUcts

Busbars / Phase Rails 2 3-phase Phase rails open, for LS

% Cuttable to desired length

% Cuttable to desired length

% 3-phase

% 3-phase

% M6 fork

% Pin

6,1

17,8

3,8 12

17,8

12

Dimensions

Phase rails open, for LS (fork centred)

P1 Item No.

P2

P3

P1

P2

P3

P1

P2

P3

P1

P2

P3

P1

P3

P1

P2

P3

085330-9-4

085331-9-4

085730-9-4

085731-9-4

4051589533096

4051589533195

4051589573092

4051589573191

Cross Section

10 mm²

16 mm²

10 mm²

16 mm²

Rated Current

63 A

80 A

63 A

80 A

GTIN (EAN)

Poles

57

57

Module

17.8 mm

17.8 mm

Length

1016 mm

1016 mm

20

20

Pack Size Colour End cap (Art. No.)

085911-2-4

085921-2-4

085911-2-4

085921-2-4

Further information about the accessories for busbars available on page 31.

PAGE 37

PRODUcts

BUSBARS /PHASE RAILS

Busbars / Phase Rails 2 4-phase Phase rails open, for LS

% Cuttable to desired length

% Cuttable to desired length

% 4-phase

% 4-phase

% M6 fork

% Pin

6,1

17,8

3,8 12

17,8

12

Dimensions

Phase rails open, for LS (fork centred)

P1 Item No.

P2

P3

P4

P1

P2

P2

P3

P4

P1

P2

P3

P4

P1

P2

P3

P4

085430-9-4

085431-9-4

085830-9-4

085831-9-4

4051589543095

4051589543194

4051589583091

4051589583190

Cross Section

10 mm²

16 mm²

10 mm²

16 mm²

Rated Current

63 A

80 A

63 A

80 A

GTIN (EAN)

Poles

56

56

Module

17.8 mm

17.8 mm

Length

1016 mm

1016 mm

15

15

085922-2-4

085922-2-4

Pack Size Colour End cap (Art. No.)

Further information about the accessories for busbars available on page 31.

PAGE 38

ACCESSORIES FOR BUSBARS /PHASE RAILS

PRODUcts

Accessories for Busbars / Phase Rails 2 Accessories End cap

End cap

End cap

Suitable for:

Suitable for:

Suitable for:

% 1-phase 10-mm² phase rails

% 2-phase 10-mm² phase rails

% 3-phase 10-mm² phase rails

% 1-phase 16-mm² phase rails Connection Cross Section

10 to 16 mm²

10 mm²

10 mm²

Phases (1…4)

1

2

3

Models

Item No.

Colour

085920-6-4

Pack Size

GTIN (EAN)

Item No.

50

4051589592062

085910-2-4

Colour

Pack Size

GTIN (EAN)

Item No.

10

4051589591027

085911-2-4

Colour

Pack Size

GTIN (EAN)

10

4051589591126

End cap

End cap

Protection against contact

Suitable for:

Suitable for:

For pin and fork:

% 2-phase 16-mm² phase rails

% 4-phase 10-mm² phase rails

% Modules 17.6 to 18.0

% 3-phase 16-mm² phase rails

% 4-phase 16-mm² phase rails

% Individually detachable

Connection Cross Section

16 mm²

10 to 16 mm²

—

Phases (1…4)

2 to 3

4

1 to 4

Models

Item No. 085921-2-4

Colour

Pack Size

GTIN (EAN)

Item No.

10

4051589592123

085922-2-4

Colour

Pack Size

GTIN (EAN)

Item No.

10

4051589592222

085990-2-4

Colour

Pack Size

GTIN (EAN)

10

4051589599023

PAGE 39

PAGE 40

Appendix Leipold Group Sites Ordering Options GTCs

Page 42 Page 44 Page 46

Appendix

Sites

Leipold Group Sites WITH PRODUCTION SITES IN GERMANY AND NORTH AMERICA, THE LEIPOLD GROUP HAS A GLOBAL REPRESENTATION.

Sites Group headquarters – Carl Leipold Metallwarenfabrik GmbH Founded: 1919 Workforce: abt. 200 Space for production: 8,300 m² Schiltacher Straße 5 D - 77709 Wolfach Phone: +49 (0) 78 34 / 83 95-0 Fax: +49 (0) 78 34 / 83 95-55 E-mail: [email protected] Website: www.leipold.com

Ferdinand Täfler GmbH & Co KG Founded: 1921 Workforce: abt. 85 Space for production: 7,500 m² In der Dehne 14 D - 37127 Dransfeld Phone: +49 (0) 55 02 / 3 01-0 Fax: +49 (0) 55 02 / 3 01-22 E-mail: [email protected] Website: www.leipold.com

HORA-Werk GmbH Founded: 1919 Workforce: abt. 75 Space for production: 2,300 m² Lange Straße 65 D - 32257 Bünde Phone: +49 (0) 52 23 / 49 80-0 Fax: +49 (0) 52 23 / 49 80-30 E-mail: [email protected] Website: www.leipold.com

PAGE 42

Sites

Appendix

LEIPOLD Inc. (USA) Founded: 1998 Workforce: abt. 30 Space for production: 1,500 m² 545 Marshall Phelps Road Windsor, CT 06095 Phone: +1 860 298 97 91 Toll-free: 800 890 15 05 Fax: +1 860 298 99 65 E-mail: [email protected] Website: www.leipold.com

Leipold, China Front Desk (Shanghai) in coop. with Taichi Automotive Co., Ltd. Room 402, 404, 406, 408, Building A No. 951 Jianchuan Road, Cangyuan Science & Technology Park Minhang District, Shanghai, China 200240 Phone: +86-21-64 35 67 42-106 E-Mail: [email protected]

PAGE 43

Appendix

ORDERING OPTIONS

Ordering Options ARE YOU INTERESTED IN ONE OF THE LEIPOLD GROUP’S PRODUCTS OR SERVICES? WE’LL BE HAPPY TO ADVISE YOU OR TAKE YOUR ORDERS, WHETHER BY PHONE, FAX OR E-MAIL.

Dirk Niestrat General Manager

Amelie Kronsbein Sales / Back Office

Marion Anger Sales / Back Office

Simone Dominguez Sales / Back Office

+49 (0) 52 23 / 49 80-19 [email protected]

+49 (0) 52 23 / 49 80-34 [email protected]

+49 (0) 52 23 / 49 80-11 [email protected]

+49 (0) 52 23 / 49 80-10 [email protected]

Jessica Wengatz Sales / Back Office

Dirk Heinze Sales Manager, German-speaking sector

Bettina Hägerbäumer Export Sales Manager

Elisabeth Wollny Export Sales Manager

+49 (0) 52 23 / 49 80-50 [email protected]

+49 (0) 52 23 / 49 80-15 [email protected]

+49 (0) 52 23 / 49 80-12 [email protected]

+49 (0) 52 23 / 49 80-13 [email protected]

Leipold, China Front Desk, Shanghai in cooperation with Taichi Automotive Co., Ltd

Mr Xiaodong HAN Managing Director

Ms Xiuming GUO Account Manager

+86-21-64 35 67 42-104 [email protected]

+86-21-64 35 67 42-106 [email protected]

SEITE 44

ORDERING OPTIONS

Appendix

2 Ordering by phone You can reach us by phone from Monday to Thursday between 8.00 am and 4.30 pm, and on Fridays between 8.00 am and 3.00 pm. Contact our sales team directly or call us on: +49 (0) 52 23 / 49 80-0

2 Ordering by fax Orders by fax – specifying which products you require along with their item numbers and the desired quantities, the delivery address and/or billing address, as well as your preferred delivery and payment methods – are to be sent to this number: +49 (0) 52 23 / 49 80-30

2 Ordering by e-mail Orders can also be placed electronically at any time by e-mail. Please specify which products you require, along with their item numbers and the desired quantities, the delivery address and/ or billing address, as well as your preferred delivery and payment methods. Faxes may be sent directly to our sales-team members or to the following e-mail address: [email protected]

PAGE 45

Appendix

GTCs

Leipold Group* general terms of delivery and payment 1. Validity These terms of business apply to all our bids, contracts, supplies and other services (hereafter referred to as “supplies”), as well as to all future terms of business, even if they have not yet been expressly agreed upon. These terms are said to be effective upon the order being placed or at the very latest upon acceptance of the goods. We hereby expressly reject any other customer terms and conditions; they only apply subject to our express written consent. If a provision is found to be ineffective, the validity of the remaining provisions will be unaffected.

2. Conclusion of contract, documents, protective rights 2.1 Our bids are subject to change. A contract is only concluded once we have confirmed the order in writing. As far as the nature and scope of our supplies are concerned, our written confirmation is exclusively decisive. If we do not confirm the order in writing, the contract is concluded upon completion of the order at the latest. Telephonic or verbal statements made by our representatives require written confirmation prior to becoming legally effective.

4.5 Applications for insolvency, declarations in lieu of an oath as per § 807 ZPO, emergent payment difficulties or signs of significant deterioration in the customer’s financial position entitle us to call off deliveries immediately and to refuse the fulfilment of current contracts for as long as the customer has not provided consideration in return or provided the appropriate security at our request, without the customer being able to withdraw from the contract or demand damage compensation.

5. Dispatch and transfer of liability 5.1 Liability for the delivery is transferred to the customer upon departure from our factory premises. 5.2 Liability is transferred to the customer when the goods are ready for dispatch but dispatch is held up for reasons beyond our control.

6. Packaging In principle, packaging is not taken back.

2.2 We reserve proprietary rights and copyright for cost estimates, first drafts, drawings and other documents; these may only be provided to third parties subject to our approval. Any drawings and other documents submitted by us within the scope of our bids shall be returned to us at our request if we are not awarded the contract. In instances where we have supplied items based on drawings, models and samples or other documents submitted by the customer, the latter undertakes to ensure that the protection rights of third parties are not violated. In the event of a third party prohibiting us from the manufacture and supply of such items through recourse to their protection rights, we are entitled – without being obliged to verify our legal position – to take on any further activities and demand compensation for damage insofar as the customer has to respond. The customer also undertakes to immediately release us from all third-party claims relating to documents submitted by him, insofar as the supplier has to respond. 2.3 We reserve the right to bill for the cost of samples and tests parts, as well as for tools required for their manufacture. Manufacturing costs of tools required for batch production will be billed by us unless otherwise agreed. In any event, all tools remain our property, even if the customer bears part or all of their manufacturing costs. 2.4 In the event of make-and-hold orders, we are entitled to procure the materials for the entire order and to produce the entire ordered quantity immediately. Any requests for change made by the customer can therefore not be considered after the contract has been awarded, unless expressly agreed otherwise.

3. Description of service 3.1 The nature of the supplies and services delivered is definitively specified by expressly agreed upon performance characteristics (e.g. specifications, markings, clearance, other data). The product’s suitability for specific applications or specific purposes shall only be guaranteed subject to express and written agreement; otherwise, the customer is exclusively liable for application and suitability risks. Any supply and service characteristics other than those agreed upon are not covered. We reserve the right to standard or technically unavoidable deviations from physical and chemical magnitudes, processes and the use of raw materials as well as ordered quantities, insofar as these are deemed reasonable by the customer. 3.2 Details regarding supplies or services (e.g. in catalogues, product literature, electronic media or on labels) are based on our general experience and knowledge and therefore only reflect standard values or characteristics. These product details as well as expressly agreed upon performance characteristics/intended applications do not release the customer from the need to test the product’s suitability for its intended purpose. 3.3 Details regarding the nature and possible uses of our products do not come with any guarantees, specifically in terms of §§ 444, 639 BGB, unless these are specifically indicated in writing.

4. Delivery and lead times 4.1 Lead times are approximate and are not contractually binding, even if a delivery date has been agreed upon with the customer, unless a fixed delivery date has been agreed upon in writing. Confirmed delivery dates are subject to the correct, complete and punctual delivery of goods to our premises. A lead time is considered to be on schedule if the delivered item leaves our factory before expiry of the deadline, or if we have informed the customer of its readiness for dispatch. The lead time does not come into effect for as long as the customer has not accordingly fulfilled his obligations such as the provision of technical details and documents, loan approvals, part payments or guarantees of payment. 4.2 We are entitled to carry out partial deliveries insofar as these are deemed reasonable by the customer and are not subsequently detrimental to usage. 4.3 Force majeure occurrences and other circumstances which are beyond our control and which make it impossible to complete an order within the deadline release us from our delivery obligations for the duration of their occurrence. 4.4 The return of sold, defect-free goods is prohibited in principle.

PAGE 46

7. Securities 7.1 7.1 We reserve the right to ownership of all our delivered good up until the time that all receivables, including partial and incidental ones owed to us by the customer within the scope of our business relationship, have been paid; in this respect, all deliveries are considered as being one comprehensive delivery transaction. With regard to current invoices, reserved ownership is held to be a security for receivables due. The above provisions also apply to future receivables. 7.2 The customer is entitled to sell on the purchase item in due course of business. He is also entitled to process or combine it; as such, he thereupon assigns us all receivables resulting from subsequent disposal, processing, combination or other judicial reasons relating to the purchase item (in particular from insurance contracts or unauthorised dealings) to the value of the invoiced total (incl. VAT). Subsequent disposal denotes usage made by the customer for the purpose of contracts of manufacture or supply. 7.3 The ownership claim also extends to those products resulting from the processing, mixing or combination of our goods, at their full value, with the outcome being that we are considered as the manufacturers of these products. Should the processing, mixing or combination with goods of a third party give rise to the latter’s proprietary rights, we shall then acquire co-ownership in proportion to the objective value of these goods. Should our ownership expire due to the combination or mixing of goods, the customer shall thereupon assign us his ownership and/or reversion rights to the new stock or item to the extent of the invoiced amount of the goods supplied by us, and shall safeguard them for us free of charge. 7.4 Notwithstanding the assignment of his rights, the customer is entitled to call in receivables arising from subsequent disposal, as long as we have not withdrawn this entitlement. We will not call in the receivables ourselves, provided that the customer duly fulfils his payment obligations towards us. Upon our first written request, the customer is obliged to provide us with the details of the debtors of the assigned receivables, and to inform the debtors of the assignment. 7.5 In accordance with clause 7.2, we are entitled to withdraw the customer’s right to further disposal and to collection of receivables assigned to us with immediate effect if the customer defaults on payments due to us, if he encounters payment difficulties due to a significant deterioration in his financial position, or if he fails to fulfil his commitments towards us accordingly. In the event of the customer’s application for insolvency, in the event of any default in payment, in the event of a declaration being made in lieu of an oath as per § 807 ZPO or in the event of changes in ownership of the customer’s company due to payment difficulties, the right to further disposal and collection of receivables assigned to us will expire automatically. 7.6 The customer shall safeguard the items forming part of our (joint) property with the care of a respectable trader and free of charge, and will ensure these items against fire, burglary and other risks. 7.7 The customer is prohibited from mortgaging or pawning any supplied goods that are subject to reservation of proprietary rights. In the event of seizure or any other prejudice to our proprietary rights on the part of a third party, the customer shall immediately inform us thereof and also confirm the proprietary rights both toward us and the third party in writing. Any remaining costs incurred upon us in spite of the successful outcome of an ensuing legal dispute shall be borne by the customer. 7.8 In the event of breach of contract by the customer, and particularly in the event of delays in payment, we are entitled to recover the goods; the customer hereby already agrees to such recovery in such an instance. Recovery of goods is only tantamount to withdrawal from the contract if this is expressly stated by us. Costs incurred by recovery (such as transportation costs) shall be borne by the customer. In cases where there has been no official notice of withdrawal, the customer may only request the delivery of recovered goods once he has paid the full purchase price and all other costs. 7.9 Securities owing to us will not be collected if the value of our securities exceeds the nominal value of the securable receivables by 20 %.

GTCs

Appendix

8. Prices and payment

10. Liability

8.1 Our prices are given in EURO ex delivering works and do not include VAT. 8.2 Unforeseen cost changes as well as changes in the cost of raw materials, labour, energy and other items beyond our control entitle us to adjust our prices accordingly. In the event of part deliveries, each delivery may be invoiced separately. If no prices have been set upon conclusion of the contract, we shall apply the price in effect on the day of delivery. 8.3 If no other payment arrangements have been agreed upon in writing, our invoices fall due for payment immediately with no deductions. 8.4 We are not obliged to accept bills of exchange, cheques and other promissory notes; they are always accepted for the sake of fulfilment. 8.5 The date of receipt of payment is the date on which the amount is made available to us or has been credited to our bank account. If the customer delays payment, we are entitled to charge interest at a rate of 8 % p.a. above the basic interest rate for the duration of the default period. This does not restrict our right to demand further damage compensation. 8.6 If the customer is unable to pay, all receivables owed by the customer from this and other contracts fall due immediately. Furthermore, deliveries forming part of this or of other contracts may be detached from a previous security or a step-bystep payment method. 8.7 We do not allow interest on advance and/or interim payments. 8.8 The customer is not entitled to offset or withhold payments if his counterclaim is undisputed or deemed to be legally valid by us.

10.1 We shall be liable for all types of damage compensation claims, in particular with regard to faults pertaining to conclusion of the contract, breach of obligations and unauthorised actions (§§ 823 ff BGB), if we, our staff or associates are found to be guilty of intentional misdemeanour or gross negligence. 10.2 In the event of damage resulting from death, bodily harm, compromised health, breach of guarantee or breach of basic contractual obligations, we shall also be liable for slight negligence. In the event of a breach of basic contractual obligations, our liability shall be limited – depending on the type of goods – to foreseeable, contractually standard and direct average damages. This provision also applies to contractual breaches committed by our staff and associates. 10.3 In the event of breached protection rights, we are liable in terms of the abovementioned provisions, inasmuch and insofar as these protection rights are violated during the contractually valid use of our goods, provided that these rights are valid in the Federal Republic of Germany and on condition that they are published at the time of our delivery. This does not apply if we have manufactured the supplied items on the basis of drawings and models or similar descriptions or details provided by the customer and are not aware, or are not expected to be aware that protection rights have been breached as a result of products developed by us. 10.4 Our liability in terms of the provisions of product liability law remains unaffected by the above provisions. 10.5 With the exception of regular claims mentioned in clauses 8.1 – 8.5, the statute of limitations for claims arising from defects in delivered products becomes effective 1 year after the date of delivery. This does not apply to an item that has been accordingly used for a building and has resulted in the latter’s defectiveness; in such instances, the statute of limitations becomes effective after a 5-year period. 10.6 Reduction and withdrawal claims shall not be admitted once the statute of limitations for rectification claims has come into effect. 10.7 Claims associated with the manufacturer’s right of recourse remained unaffected by this paragraph. 10.8 Furthermore, we shall not be held liable.

9. Claims against defects 9.1 We are liable for defects found on goods supplied by us in accordance with the following provisions only: 9.2 The customer shall duly fulfil his inspection and claim obligations in accordance with § 377 HGB. 9.3 Complaints shall only be accepted by us if they are submitted in writing. Complaints lodged against sales representatives, carriers or other third parties shall not be deemed to be filed in due form and due time. 9.4 In the event of a defective consignment, we reserve the opportunity – prior to the start of production (processing or installation) – to resolve/eliminate the defect or redeliver the goods, unless the customer deems this unreasonable. In the event of our inability to do this or in the event of our failure to fulfil this commitment immediately, the customer may then return the goods at our risk. In urgent cases, he can – subject to our approval – eliminate the defect by his own means or by means of a third party. Any costs incurred shall be borne by us as per clause 8. 9.4 If the defect is detected only after the start of production – despite compliance with the obligation stipulated in clause 1 – the customer may demand rectification (either in the form of rework or replacement, depending on our choice). 9.5 In the event of a replacement, the customer is obliged to return the defective item upon our request. 9.6 Annulment of the contract or a reduction in the purchase price shall only be granted if the defect cannot be rectified within a reasonable period, if rectification of the defect is likely to incur disproportionate costs, if rectification of the defect is deemed to be unreasonable or for other reasons, is deemed to have failed. Only in the event of insignificant defects is the customer not entitled to withdraw from the contract. 9.7 In the event of a complaint, the customer shall immediately grant us the opportunity to inspect the goods in question; in particular, the incriminated goods shall be made available to us at our request and at our cost. In the event of unfounded complaints, we reserve the right to demand that the customer bear any transportation and inspection expenses. 9.8 Defective goods having to be returned shall only be returned subject to our prior approval. We are not required to accept goods returned to us without our prior approval. In such cases, return costs shall be borne by the customer. 9.9 Defect claims shall not be accepted if the fault is due to non-compliance with operating, maintenance and installation instructions, to inappropriate or improper use or storage, to improper or negligent handling or assembly, to natural wear and tear, or to intervention on the part of the customer or a third party. 9.10 The customer may only demand damage compensation and reimbursement for defects due to costs incurred through dismounting and assembly, as well as associated transportation costs, if this has been agreed upon by contract. 9.11 For products that are not delivered as new in accordance with the agreement, the customer is not entitled to the above-mentioned claims.

11. Place of performance, place of jurisdiction, other agreements 11.1 The customer is only entitled to bring claims arising from the contract subject to our prior agreement. 11.2 The place of performance for all claims arising from business ties and more specifically from our deliveries is the place from which the delivery was performed. 11.3 The place of jurisdiction for all claims arising from business ties and more specifically from our deliveries is that of the current head office of the Leipold Group member responsible for the delivered item. This place of jurisdiction also applies for disputes regarding the conclusion and effectiveness of the contract. However, we are also entitled to bring an action against the customer before the competent courts for his head office. 11.4 The law of the Federal Republic of Germany applies exclusively, without possibility of recourse to its international private legislation, insofar as it refers to the validity of another legal system. Application of the United Nations Convention on Contracts for the International Sale of Goods is not admissible.



* Members of the Leipold Group: Carl Leipold Metallwarenfabrik GmbH Carl Leipold Verwaltungs-GmbH HORA Werk GmbH Ferdinand Täfler GmbH & Co KG Leipold Inc. Leipold (UK) Ltd.

PAGE 47

THE LEIPOLD GROUP: Sites

Carl Leipold Metallwarenfabrik GmbH Schiltacher Straße 5 D - 77709 Wolfach Phone: +49 (0) 78 34 / 83 95-0 Fax: +49 (0) 78 34 / 83 95-55 E-mail: [email protected] Website: www.leipold.com Ferdinand Täfler GmbH & Co KG In der Dehne 14 D - 37127 Dransfeld Phone: +49 (0) 55 02 / 3 01-0 Fax: +49 (0) 55 02 / 3 01-22 E-mail: [email protected] Website: www.leipold.com HORA-Werk GmbH Lange Straße 65 D - 32257 Bünde Phone: +49 (0) 52 23 / 49 80-0 Fax: +49 (0) 52 23 / 49 80-30 E-mail: [email protected] Website: www.leipold.com LEIPOLD Inc. (USA) 545 Marshall Phelps Road Windsor, CT 06095 Phone: +1 860 298 97 91 Toll-free: 800 890 15 05 Fax: +1 860 298 99 65 E-mail: [email protected] Website: www.leipold.com

Room 402, 404, 406, 408, Building A No. 951 Jianchuan Road, Cangyuan Science & Technology Park Minhang District, Shanghai, China 200240 Phone: +86-21-64 35 67 42-106 E-Mail: [email protected]

K-EN-03-2012

Leipold, China Front Desk (Shanghai) in cooperation with Taichi Automotive Co., Ltd.