LIVE AUCTION (+ WEBCAST)

FUBA PRINTED CIRCUITS GMBH DRESDEN (DE)

Production of printed circuit boards Kesselsdorfer Straße 216 - 01169 Dresden-Gorbitz (FUBA Printed Circuits GmbH)

Auction date: Thursday 21 OCTOBER starting 11:00

Auction room: KIM Hotel, Gompitzer Höhe 2 - 01156 Dresden Starting: 11:00

Viewing: Tuesday 19 October from 10:00 until 17:00 Wednesday 20 October from 09:00 until 17:00 Thursday 21 October from 08:00 until 10:00 Kesselsdorfer Straße 216 - 01169 Dresden-Gorbitz (Germany)

23­09­10 11.27

www.TroostwijkAuctions.com

Thursday 21 October 2010   FUBA PRINTED CIRCUITS GMBH DRESDEN Special Conditions Auction date Viewing

Thursday 21 October 2010 Tuesday 19 October from 10:00 until 17:00 Wednesday 20 October from 09:00 until 17:00 Thursday 21 October from 08:00 until 10:00 FUBA Printed Circuits GmbH Kesselsdorfer Straße 216 01169 Dresden-Gorbitz, Germany Auction room Thursday 21 October from 11:00 until 17:00 KIM Hotel Gompitzer Höhe 2 01156 Dresden, Germany Company organising this Live Auction (+ TROOSTWIJK AUKTIONEN GMBH & CO. KG Webcast) Stolberger Str. 313 50933 Köln, Germany Phone: +49 221 69066-0 Fax: +49 221 69066-10 Email: [email protected] Mark-up 18.00% VAT 19.00% Collection Tuesday 02 November from 10:00 until 17:00 Wednesday 03 November from 08:00 until 16:00 Thursday 04 November from 08:00 until 16:00 Friday 05 November from 08:00 until 11:00 FUBA Printed Circuits GmbH Kesselsdorfer Straße 216 01169 Dresden-Gorbitz, Germany Webcast charge In addition to the buyer's premium Troostwijk will charge 3,5% to all webcast bidders. Collection details The buyer is fully responsible for the dismantling, loading and transportation of the bought lots. Troostwijk Auktionen GmbH & Co. KG cannot accept any responsibility unless indicated otherwise. The collection/pick-up will only take place on the mentioned delivery date/time and address. Information VAT All foreign buyers from countries belonging to the European Community must inform us of their VAT number. If a buyer does not furnish this proof, the auctioneer has to charge the legal German VAT. This VAT amount cannot be refunded. Foreign buyers from countries not belonging to the European Community have to pay the legal German VAT as deposit to the auctioneer. After receipt of the original export documents, which must be stamped officially to prove that the export has taken place, the auctioneer will refund the paid German VAT. Payment When a bid has been accepted the buyer must immediately pay a deposit of at least 50% of the purchase price in cash or by bank certified crossed cheque. Troostwijk will issue a receipt for this. All payments must be made in € (Euro). Other payment forms such as EC Cash, Maestro, Visacard und Euro/Mastercard are accepted under reservation. The remainder must be paid at the latest on one of the collection days specified in these general conditions of auction, however before the start of dismantling/collection. Your immediate bank payment is required within 48 hours after receipt of the purchase agreement (proforma invoice). Please state your buyer number and the auction name. Troostwijk Auktionen GmbH & Co. KG Deutsche Bank AG, Frankfurt Konto-Nr.:    802 731 0 - 02 BLZ:            500 700 10 IBAN:           DE62 5007 0010 0802 7310 02 SWIFT:        DEUTDEFF Terms and Conditions of Sale For the auction the General Terms and Conditions of Online Auction are applicable concerning the (possible) purchase of movable assets, in addition to these Special Conditions. Contact e-mail: [email protected], phone: +49-221-690660

www.TroostwijkAuctions.com

Lot

Number Description

 

1

 

2

 

3

 

4

 

5

 

6

 

7

 

8

 

9

 

10

 

11

 

12

 

13

 

14

 

15

 

16

 

17

 

18

 

19

 

20

 

21

 

22

 

23

 

24

 

25

 

26

 

27

1 table drilling machine WMW, BT 12, serial number 18422, table drilling machine, throat 210 mm, revolution speed 4503550 rpm 1 bandsaw Optimum, Opti S 181 G, bandsaw, cap. diam. 180 mm, square, 180x240 mm, sawband dim. 2362x19x0,9 mm, electrical connection, 750 W, 400 V, 50 Hz 1 lathe Optimum, D 320x920, lathe, cap. diam. 320x920 mm, revolution speed 65-1800 rpm, capacity approx. 40 mm 1 double bench grinder WMW, SET 2x20, double bench grinder, 3000 rpm 1 tool trolley tool trolley, 6 drawers, with contents 1 tool trolley tool trolley with contents 1 tool trolley tool trolley, 7 drawers, with contents 1 tool trolley tool trolley, 6 drawers, with contents 1 tool trolley Garant, tool trolley with contents 1 tool trolley HHW, tool trolley with contents 1 tool trolley HHW, tool trolley with contents 1 cordless screw driller Hitachi, cordless screw driller, 18 V, with case 1 cordless impact wrench Hitachi, WR 18 DL, cordless impact wrench, with case 1 cordless screw driller Makita, 8270 D, cordless screw driller, 12 V, with screw and drill bit set, with case 1 cordless screw driller Bosch, PSR 960, cordless screw driller, 9,6 V, with case 1 cordless screwdriver Bosch, PSR, cordless screwdriver, 2,4 V, with inserts and case 1 electric grinder Dremel, 398/1, electric grinder, 5000-33.000 rpm, with inserts and case 1 hole saw assortment Reca, hole saw assortment, HSS bimetal, with holding fixtures, accessories, diam. 19-76 mm and case 1 assortment of gypsum plaster board plugs assortment of gypsum plaster board plugs and screws, various locking washers, with 2 containers 1 blind riveting tongs Gesipa, blind riveting tongs with accessories 1 hex nut driver set hex nut driver set with ratchet, cap. 8-32 mm 1 internal extractor set Baldua, internal extractor set and 1 extractor 1 hot air Atlas Copco, hot air, 2000 W 1 angle grinder Bosch, GWS 14-125 professional, angle grinder 1 jigsaw Würth, STP-60-E, jigsaw, 550 W, max. 60 mm 1 drilling machine Bosch, GBM 10 SRE, drilling machine 1 cordless drilling machine

 

22

 

23

 

24

 

25

Lot  

26

 

27

 

28

 

29

 

30

 

31

 

32

 

33

 

34

 

35

 

36

 

37

 

38

 

39

 

40

 

41

 

42

 

43

 

44

 

45

 

46

 

47

 

48

 

49

1 internal extractor set Baldua, internal extractor set and 1 extractor 1 hot air Atlas Copco, hot air, 2000 W 1 angle grinder Bosch, GWS 14-125 professional, angle grinder 1 jigsaw NumberWürth, STP-60-E, Description jigsaw, 550 W, max. 60 mm 1 drilling machine Bosch, GBM 10 SRE, drilling machine 1 cordless drilling machine Schwarzbach, SAB 18 V-P, cordless drilling machine, 18 V, with 1 charger 2 heavy duty lifter heavy duty lifter, cap. 5 t 1 lot drills lot drilling bits, bolt circle punches, dry-wall plugs and miscellaneous 1 wave soldering machine Ersa, ETS 250, year built 2007, wave soldering machine, wave width 250 mm, speed 0,5-3 m/min. 1 bench soldering machine EPM, Mini Waver, bench soldering machine, with 2 soldering jigs, automatic wave soldering machine, type SNRP4-20, y/c 2006 1 dip soldering machine TL 6, year built 1991, dip soldering machine 1 thermal-shock test console Espec, TSD 100, year built 2006, serial number 14000010, thermal-shock test console, internal space approx. 700x410x370 mm and 900x600x450 mm, cooling agent R 404A 30 kg, R 23 10 kg 1 thermal-shock test console Weiss, TSD 130, year built 2002, serial number 59226024310010, thermal-shock test console, internal spaceapprox. 400x600x400 mm, cooling agent R 404 A 2,2 kg, R 23 1,2 kg, connection 400 V, 50 Hz, 14 kW, 26 A 1 s/s climatic chamber Espec, PA-3KPH, year built 2005, s/s climatic chamber, inside dim. approx. 570x750x840 mm 1 s/s climatic chamber Espec, PL-2KPH, year built 2000, s/s climatic chamber, inside dim. approx. 470x550x750 mm 1 climatic chamber Heraeus, VLK 08/500, year built 1989, serial number 89/522/32861, climatic chamber, temperature range -80/180 °C, inside dim. 730x820x760 mm, cooling agent R 502 1,6 kg, R 13, digital control 1 heating cabinet Memmert, ULE 400, heating cabinet, temperature 220 °C, inside dim. approx. 400x310x390 mm 1 measuring station measuring station, with "Erichsen" physiometer 906 MC and "Metra" multimeter 1 ohmmeter Dr. Thiedig, Milli TO 2, ohmmeter 2 direct voltage regulators Statron, 4210, direct voltage regulators 2 direct voltage regulators Statron, 4210, direct voltage regulators 1 test station test station with PC and monitor 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888 L, year built 2001, serial number D 7302001, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, 125.000 rpm, working range approx. 720x570 mm 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888, year built 1999, serial number 891476, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, spindle type 1331/30, 125.000 rpm, working range approx. 720x570 mm 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07101297, x-ray drilling machine, spindle type WW 1201, 110.000 rpm, circuit board dim. max. 800x650 mm, min. 300x300 mm 1 CNC milling machine Schmoll, Compact 23.3, year built 1989, serial number 891416, CNC milling machine, 3 spindle holders, 1 spindle, spindle type SC6 63 2-phase, 60.000 rpm 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07100697, x-ray drilling machine, spindle type 1201, 110.000 rpm, table dim. approx. 770x910 mm, with loader and unloader 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911709, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm

 

47

 

48

Lot  

49

 

50

 

51

 

52

 

53

 

54

  54A  

55

 

56

 

57

 

58

 

59

 

60

 

61

 

62

 

63

 

64

 

65

Pluritec, Inspect X-Ray, year built 1997, serial number 07101297, x-ray drilling machine, spindle type WW 1201, 110.000 rpm, circuit board dim. max. 800x650 mm, min. 300x300 mm 1 CNC milling machine Schmoll, Compact 23.3, year built 1989, serial number 891416, CNC milling machine, 3 spindle holders, 1 spindle, spindle type SC6 63 2-phase, 60.000 rpm 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07100697, x-ray drilling machine, spindle type 110.000 rpm, table dim. approx. 770x910 mm, with loader and unloader Number1201, Description 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911709, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1993, serial number 931429, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm 1 CNC PCB drilling machine Schmoll, Compact 25.2/45, year built 1989, serial number 891469, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm 1 CNC PCB drilling machine Schmoll, 25.2/45, year built 1989, serial number 891470, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm 1 CNC PCB drilling machine Schmoll, Compact 23.3/3, year built 1989, serial number 891414, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911717, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm, cooling defective 1 lot spare parts lot various spare parts (rack contents of lot 1180) 1 exhaustion plant Erbo, year built 1996, exhaustion plant, container no. 9601, with "IRS" pressure control D4-S2 and pipework 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1989, serial number 891415, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002891, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002892, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992568, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992570, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992569, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982220, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982221, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982222, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992526, CNC PCB drilling machine, 2

 

63

 

64

Lot  

65

 

66

 

67

 

68

 

69

 

70

 

71

 

72

 

73

 

74

 

75

 

76

 

77

 

79

 

80

 

81

 

82

 

83

working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982221, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982222, CNC PCB drilling machine, 2 spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, Numberspindles, Description working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992526, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992527, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control 1 autom. PCB loading and unloading unit Alfa, automatic PCB loading and unloading unit for 10 machines, with control and PC, length approx. 22,5 m, with fence (shuttle) 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881313, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911619, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911672, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911673, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881391, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm 1 CNC PCB drilling machine Schmoll, Compact 26/3, year built 1991, serial number 911708, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm 1 CNC PCB drilling machine Schmoll, Compact 22/2, year built 1989, serial number 891337, CNC PCB drilling machine, 2 spindles, spindle type 1201, 110.000 rpm 1 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891477, CNC PCB drilling machine, 4 spindles, spindle type 1331-17, 110.000 rpm 2 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891471, 891472, CNC PCB drilling machines, each 4 spindles, spindle type 1331-17, 125.000 rpm, with 1 "Schmoll" loading unit, type Bela, s/n 891488, y/c 1989 1 CNC scoring machine Löhr + Hermann, LH 306 SM, year built 1994, serial number 200.324/037, CNC scoring machine,  PCB format min./max. approx. 180x180 mm/640x640 mm, PCB thickness 0,5-3,2 mm, infeed speed, x-axis max. 30 m/min., y-axis max. 40 m/min., with loading and unloading 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 2000, serial number 002594, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1997, serial number 972229, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1998, serial number 982443, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader 1 CNC PCB drilling and milling machine Schmoll, System 1, year built 1998, serial number 982442, CNC PCB drilling and milling machine, 2 spindles, spindle type SC 63, 60.000 rpm and spindle type 1331, 125.000 rpm, tool magazine 660fold, "Schmoll" x-30 control 1 CNC PCB drilling machine

 

 

81

82

Lot  

83

 

84

 

85

 

86

 

87

 

88

 

95

 

96

 

97

 

98

 

99

 

100

 

101

 

102

 

103

 

104

 

105

 

106

 

107

Schmoll, A-System 4/3, year built 1997, serial number 972229, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1998, serial number 982443, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader 1 CNC PCB drilling and milling machine System 1, year built 1998, serial number 982442, CNC PCB drilling and milling machine, 2 NumberSchmoll, Description spindles, spindle type SC 63, 60.000 rpm and spindle type 1331, 125.000 rpm, tool magazine 660fold, "Schmoll" x-30 control 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1993, serial number 931775, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 3-phase, 60.000 rpm 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1992, serial number 921680, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm 1 CNC PCB milling machine Schmoll, System 5/4, year built 1994, serial number 941827, CNC PCB milling machine, 4 spindles, spindle type D 1331-26, 125.000 rpm 1 drill hole inspector Meiko/Japan, MHI 600, year built 1998, drill hole inspector for PCB, working width approx. 620 mm, with automatic loader, type MPL 600, seperator/band, type MSP 601 and automatic discharging type MST 761 1 CNC-multisensor-coordinate measuring machine Werth, Video Check IP 600, year built 1999, CNC-multisensor-coordinate measuring machine, with computer, 2 monitors, "Brother" printer, type HC 2040 and accessories 1 plug-in connector milling machine FSL/Shode, SF 1000, year built 1994, plug-in connector milling machine 2 dust exhaustion plant Erbo, dust exhaustion plant, 1x type STA 2000 EX, consisting of: separator, blower, 22 kW (milling machine), blower 2x 7,5 kW (scoring machine) and filter 1 loader Schmid, VA 806, loader, with vacuum handling and roller conveyor 1 HD final cleaning Schmid, HD final cleaning, consisting of 5 modules: module 1 infeed, module 2 rinsing, module 3 cascade rinsing, module 4 drying, module 5 discharge and control cabinet, working width 650 mm, machine length 4600 mm 1 unloader Schmid, VA 806, unloader, with vacuum handling and belt conveyor 1 drill grinding machine Kocher, BSS 6R, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37  kW, 2700 rpm, with loading and unloading magazine 1 drill grinding machine Kocher, BSS 6R, year built 1989, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°,  grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine 1 drill grinding machine TCT, AMP 100, year built 2007, serial number A100061101, drill grinding machine, drill diam. 0,1 3,175 mm, point angle 110° - 180°, grinding disc diam. 75 mm, revolution speed 5400 rpm, cutting  speed 1200 m/min. 1 drill grinding machine TCT, drill grinding machine, drill diam. 0,2 - 3,175 mm, point angle 110° - 180°, clearance angle 0° 3°, capacity 200 - 240 pieces/h 1 drill grinding machine Hawera, drill grinding machine, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°,  30° 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130°  (165°), clearance angle 15°, 30° 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130°  (165°), clearance angle 15°, 30° 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130°  (165°), clearance angle 15°, 30° 1 drill inspection station Kocher, serial number 519/S 2 88, drill inspection station, consisting of: stereo microscope with

 

104

 

105

 

106

Lot  

107

 

108

 

109

  114A  

115

 

117

 

118

 

119

 

120

 

121

 

122

 

123

 

124

  124A   124B  

125

 

126

 

127

 

128

 

129

 

130

  130A   130B   130C   130D

1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130°  (165°), clearance angle 15°, 30° 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130°  (165°), clearance angle 15°, 30° 1 drill grinding machine drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130°  NumberHawera, Description (165°), clearance angle 15°, 30° 1 drill inspection station Kocher, serial number 519/S 2 88, drill inspection station, consisting of: stereo microscope with lighting and fixture 1 ring setting machine Union Tool, RSM-H, serial number 113368, ring setting machine, with 1 lot various rings 1 ultrasonic cleaning bath Sonorex, RK 510 H, serial number 321095103, ultrasonic cleaning bath 1 lot PCB material blanks lot PCB material blanks 1 ring setting and drill packaging machine Kocher, year built 1989, ring setting and drill packaging machine 1 Adara press Cedal, 52, year built 2006, serial number 06 MLP 10.013, Adara press, pressing surface 630x840 mm, package height max. 165 mm, with PC and printer 1 cooling press Cedal, cooling press, 3 levels, inside dim. approx. 650x900x300 mm 1 scissor lifting table scissor lifting table for Adara press 1 scissor lifting table scissor lifting table for Adara press 1 placing station Cedal, manual placing station for Adara press, working width approx. 670 mm 1 storage unit storage unit for copper rolls for Adara press 1 wall racks wall racks for roll storage, working width 760 mm 1 heatsink multilayer press Bürkle, LA-M 150, year built 1989, serial number 2943, heatsink multilayer press, main press force 1500 kN, pre-press force 150 kN, with press carriage, steam-heated, piston diam. 250 mm, working surface approx. 750x700 mm 1 lot sheet steel blanks lot sheet steel blanks, on 5 transport trolley, dim. approx. 650x520 mm, 640x680 mm, 640x650 mm 3 transport trolleys transport trolleys with steel blanks 1 Thermobond feeder Cedal, BM 66 S, Thermobond feeder, temperature max. 300 °C, working range WxL approx. 280650x370-720 mm 1 measuring machine Projectina, RPM 600, measuring machine, cross table x,y 600x500 mm, with digital measuring computer and projector head 1 multilayer-press Cedal, Adara 48 d, year built 2000, multilayer-press, pressing surface 720x1080 mm, package height 140-190 mm, temperature 350 °C, with PC and printer 1 cooling press Cedal, year built 2000, cooling press, 3 levels, chamber dim. approx. 1000x1200x130 mm 1 shuttle Cedal, year built 2000, shuttle, cap. 1000 kg, length approx. 10 m, with roller conveyor 1 lay-up-station Cedal, year built 2000, lay-up-station, with laser beam positioning, working width approx. 820 mm, with scissor lift, loading and unloading 1 lot sheet steel blanks lot sheet steel blanks, dim. 700x1150 mm, 700x1000 mm, 700x670 mm, on 6 transport trolleys 1 lot sheet steel blanks lot sheet steel blanks, dim. 660x700 mm, 700x1000 mm, with 4 transport trolleys 2 transport trolleys transport trolleys, dim. 1100x900x1000 mm 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm

 

130

  130A   130B   Lot 130C   130D   130E  

131

 

132

 

133

 

134

 

135

 

136

 

137

 

138

 

139

 

140

 

141

 

142

 

143

 

144

 

145

 

146

 

147

  147A  

148

1 lay-up-station Cedal, year built 2000, lay-up-station, with laser beam positioning, working width approx. 820 mm, with scissor lift, loading and unloading 1 lot sheet steel blanks lot sheet steel blanks, dim. 700x1150 mm, 700x1000 mm, 700x670 mm, on 6 transport trolleys 1 lot sheet steel blanks lot sheet steel blanks, dim. 660x700 mm, 700x1000 mm, with 4 transport trolleys 2 transport trolleys Number Description transport trolleys, dim. 1100x900x1000 mm 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm 1 shelving frame Cedal, year built 2000, shelving frame, 3 levels 1 rack for rolls Cedal, year built 2000, rack for rolls, 8-fold 2 wall racks for rolls wall racks for rolls, 6-fold, dim. 1070x2000 mm 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories 1 exhaustion plant Erbo, STA 1600 Ex, exhaustion plant with accessories 1 edge milling plant Löhr + Herrmann, LH 605/10, year built 1989, serial number 1289/29-220, edge milling plant, working width approx. 700 mm, total dim. approx. 1600x11000 mm, consisting of: roller conveyor, "Origa" handling, 2 milling units, turning station, depositing table 1 PCB sawing machine Smid, 840 SD, year built 1988, serial number 0405 V P0384, PCB sawing machine, saw blade diam. 400 - 500 mm, sawing spindle speed 3000 rpm 1 PCB sawing machine Smid, 510, year built 1989, serial number 0397 V P0384, PCB sawing machine, saw blade diam. 275 - 400 mm, sawing spindle speed 2800 rpm 1 drilling und pinning machine Schmoll, ABS 2, year built 1989, serial number 891489, drilling und pinning machine, with table 1 infrared dryer Heraeus, CM-V/24-/R/T21PC, year built 1991, serial number 91-5-037, infrared dryer with roller conveyor, temperature 150 °C, heating zone length 2225 mm, width 650 mm, cooling zone length  1000 mm, total dim. LxWxH (oven) 4335x930x1160 mm 1 hydropneumatic table press Mäder, HP 10.000 HV 10/50, year built 2006, hydropneumatic table press, compressed air 100 kN,  lifting length 10/50 mm, workpiece dim. 310x220 mm/14 kg, with tools 1 hydraulic table press Mäder, HP 10.000 HV 10/50 E-ZH, year built 2001, serial number 1341601/01, hydraulic table press, cap. 100 kN 1 assembly plant ISS, assembly plant for PCB with CU inlays, mainly consisting of: table support, sliding cross table, press, inlay feed, fixation, blank holder, brushing station, SPS Elektrik, "Siemens" control panel 1 CNC drilling machine Schmoll, Compact 10, year built 1991, serial number 911608, CNC drilling machine, 1 spindle, spindle type SC 63, 2-phase, 60.000 rpm 1 finger tester ATG, A 3, serial number 06.01 00A3003, finger tester, 8 test heads (4 heads/side), synchronous testing of several PCB active test area 520x400 mm (20,4 inn x 15,7 in), Prüflingsgröße max.  610x457 mm (20,0 in x 18,0 in), 2 cameras for optical scanning top down, optical imaging approx. 8x 6,5 mm with 10 µm/pixel resolution, 2-point combination measurement from 1 Ohm, 100% insulation test with 10 MSL via field measuring method, positioning accuracy in x and y direction +/- 35 µm, smallest test point 100 µm 1 universal PCB test system ATG, A 1000, serial number 9208 1000 60, universal PCB test system, contact surface max. 600x600 mm, height adjustment 0 - 40 mm, stufenlos, with PC and printer 1 mobile adapter loading system Luther Maelzer, ALS 100/20, year built 1995, serial number 596066, mobiles adapter loading system 1 repair workstation repair workstation, consisting of: "Olypmus" microscope, light source, "Ersa" soldering station and worktable

 

147

  147A

Lot  

148

 

149

 

150

 

151

 

152

 

153

 

154

 

155

 

156

 

157

 

158

 

159

 

160

 

161

 

162

  162A  

163

 

164

  164A  

165

 

166

 

167

 

168

 

169

 

170

6,5 mm with 10 µm/pixel resolution, 2-point combination measurement from 1 Ohm, 100% insulation test with 10 MSL via field measuring method, positioning accuracy in x and y direction +/- 35 µm, smallest test point 100 µm 1 universal PCB test system ATG, A 1000, serial number 9208 1000 60, universal PCB test system, contact surface max. 600x600 mm, height adjustment 0 - 40 mm, stufenlos, with PC and printer 1 mobile adapter loading system Maelzer, ALS 100/20, year built 1995, serial number 596066, mobiles adapter loading system NumberLuther Description 1 repair workstation repair workstation, consisting of: "Olypmus" microscope, light source, "Ersa" soldering station and worktable 1 repair workstation Carl Zeiss, repair workstation, consisting of: "Olympus" microscope, light source, "Ersa" soldering station with magnifier and worktable 1 welding and repair workstation Covatec, P 1240-75/Circuit Saver, welding and repair workstation, with "Wild" microscope and worktable 1 welding and repair workstation welding and repair workstation, with "Mantis" microscope, 3 "Weller" soldering stations, "Unitron" light table 1 stereo microscope Olympus, SZ 30, stereo microscope with Highlight 2000 and worktable 1 AOI inspection system Orion, Orion 604/Camtek, year built 2000, serial number 2432, inspection system 1 splitting-head welding machine Covatec, SPR 10-1010, year built 2001, splitting-head welding machine, with "Nikon" microscope, accessories and worktable 1 conducting paths measuring device Navitar, conducting paths measuring device, with "Shuttl" PC and TFT-monitor, "Olympus" light source and worktable 1 microscope Olympus, SZ 30, microscope, with light source and measuring bridge 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0310, optical inspection system, working width 650 mm, with loader, "Linux" inkjet printer, type 4800 and control panel 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0404, optical inspection system, working width 650 mm, with unloader, "Linux" inkjet printer, type 4800 and control panel 1 turning station Cemco, PJ35 LD 016, year built 1995, turning station 1 verifying station Orbotech, VRS-4 L I, year built 2000, serial number VR 0419, verifying station 1 verifying station Orbotech, VRS-4 I, year built 1998, serial number VR 8434, verifying station 1 verifying station Orbotech, VNR 300, year built 1992, serial number 21, verifying station 1 lot "Orbotech" parts lot "Orbotech" parts for Vision-system 1 verifying station Orbotech, VNR 300, year built 1993, serial number 24, verifying station 1 inspection system Orbotech, Vision Blaser, year built 1992, serial number 2666, automatic inspection system 1 cabinet cabinet with "Orbotech" accessories and 1 wooden cabinet with various contents 1 inspection system Orbotech, Vision Blaser, year built 1993, serial number 1018, automatic inspection system 1 welding and repair workstation Covatec, welding and repair workstation with stereo microscope and worktable 1 welding set Mania, Cir-Kit Weld, welding set and worktable 1 scanning electron microscope ISI, ABT-55, year built 1991, scanning electron microscope, with PC and monitor 1 digital hardness measuring ocular Leitz, Miniload 2, digital hardness measuring ocular for "Vickers" and "Knopp" hardness testers, with computer-counter-printer, type RZD-DO 1 profile projector Projectina, 4014 BK 1, serial number 890930, profile projector

 

166

 

167

 

168

 

169

Lot  

170

 

171

 

203

 

204

 

205

 

206

 

207

 

208

 

209

 

210

 

211

  211A  

212

 

213

 

214

 

215

 

216

 

217

 

218

 

219

 

220

1 welding and repair workstation Covatec, welding and repair workstation with stereo microscope and worktable 1 welding set Mania, Cir-Kit Weld, welding set and worktable 1 scanning electron microscope ISI, ABT-55, year built 1991, scanning electron microscope, with PC and monitor 1 digital hardness measuring ocular Miniload 2, digital hardness measuring ocular for "Vickers" and "Knopp" hardness testers, with NumberLeitz, Description computer-counter-printer, type RZD-DO 1 profile projector Projectina, 4014 BK 1, serial number 890930, profile projector 1 stereo mikroscope VMZ, stereo microscope 1 cleaning line for copper surfaces Enthone, Entek Plus CU-106 A Additive, year built 1999, serial number 5100120, cleaning line for copper surfaces, consisting of: cleaner, temperature +50/-2 °C, stripping, temperature +38/-2 °C,  Entek temperature +45/-2 °C, dryer, temperature +100/-2 °C, 10 modules, module width 800 mm,  with suction unit, pipework, control cabinet and clip-on baskets 1 gas scrubber Rühl, C5-1000/500/4000, serial number 88-800IL5, gas scrubber, capacity 0.63 cm³, washing agent: caustic soda solution 1 input station Löhr + Herrmann, input station, infeed width approx. 850 mm 1 chemical tin plant Mc Dermid, Mac Star HSR, year built 1999, serial number 16-6508-99-10, chemical tin plant, consisting of: infeed, cleaner, cascade rinsing, etching, rinsing, control, Pre-Dip, immersion, cascade rinsing, rinsing, dryer, "Siemens" control Simatic PO 27, cap. VS= 1000 mm/min., module width approx. 900 mm, total dim. approx. 13.000x1500 mm, operating hours (read off) 45.104, with control cabinet and pipework, etc. 1 outfeed station Löhr + Herrmann, outfeed station, width approx. 900 mm 1 input station Löhr + Herrmann, input station, width approx. 850 mm 1 stripping plant Schmid, 25, year built 1995, serial number 25-95-048, stripping plant, type 98, s/n 98-00-192, y/c 2000, infeed 0,2-6 m/min., consisting of; degreasing, rinsing, stripping, rinsing, dryer, 7 modules, with control cabinet 1 s/s transfer station Penta, s/s transfer station, mobile, dim. approx. 1500x800 mm 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-based, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 3000x700 mm 1 subsequent cleaning plant Schmid, subsequent cleaning plant, type 16, s/n 16-96x314, y/c 1997, type 98, s/n 98-00-195, y/c 2000, working height approx. 650 mm, with 6 modules, a.o. infeed, rinsing, drying, with pipework, pumps, exhaust air unit, control cabinet, etc. 1 removal station Löhr + Herrmann, removal station, width approx. 850 mm 1 input station Löhr + Herrmann, input station, width approx. 700 mm 1 stripping line Schmid, 25, year built 1997, serial number 25-96-343, stripping line, infeed 0,2-6 m/min., consisting of: degreasing, rinsing, stripping, rinsing, drying, with control cabinet 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-free basis, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 2000x1000 mm 1 subsequent cleaning line Schmid, 16, year built 1997, serial number 16-96-344, subsequent cleaning line, working width approx. 700 mm, 6 modules, a.o. transfer, cleaning, rinsing, drying, with pipework, pumps, control cabinet, etc.

 

217

 

218

 

219

  Lot 220

 

221

 

222

 

223

 

224

 

225

 

226

 

227

 

228

 

229

 

230

 

231

 

232

 

233

 

234

 

235

 

236

 

237

 

238

 

239

 

240

 

241

 

242

1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-free basis, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 2000x1000 mm 1 subsequent cleaning line Number Description Schmid, 16, year built 1997, serial number 16-96-344, subsequent cleaning line, working width approx. 700 mm, 6 modules, a.o. transfer, cleaning, rinsing, drying, with pipework, pumps, control cabinet, etc. 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm 1 shelving system shelving system, with various spare parts, length approx. 3000 mm 1 metal cabinet metal cabinet with various spare parts 1 batching tank Höllmüller, Devo 47x, year built 1989, serial number 1275/11, batching tank 1 lot tin/lead lot tin/lead, with 3 euro-pallets 1 gas scrubber Hema, NKV 1000 SO, serial number 15048-1, gas scrubber, air volume 5000 m³/h, volume circulated 13 m³/h 1 s/s cleaning tank Penta, cleaning tank, dim. approx. 2000x600 mm 1 cleaning tank KLE, cleaning tank, mobile, dim. approx. 1200x700 mm 1 compressed-air tank Lohenner, year built 2000, compressed-air tank, cap. 500 l 1 compressed-air tank OKS, year built 2000, compressed-air tank, cap. 500 kg 1 s/s automatic electroplating system Atotech, Synaplus-vertikal, year built 2006, s/s automatic electroplating system, consisting of: loader, reservoir, dryer, rinse, trestle stripping, galvanic tin, degreasing, stripping, chemical pickling, galvanic copper, with 2 hoisting and running gears, y/c 2006, cap. 250/500 kg, speed 45 m/min., working width approx. 3300 mm, with pumps, control, control cabinets, pipework, anode cleaning, gangway, etc. total dim. approx. 30.000x5000 mm, without anodes 1 lot anodes lot anodes (contents of lot 231) 1 s/s automatic electroplating system STS, year built 1987, s/s automatic electroplating system, type U 100, s/n DDR-238, 239, type U 2850, s/n DDR-286, 287, PCB formats, 550x393,75 mm, consisting of: loading, dryer, degreasing, rinsing, stripping, rinsing, galvanic tin, chemical pickling, rinsing, stripping, chemical pickling, galvanic copper, with pipework, containers, control cabinets, pumps, with incomplete gangway, etc., total dim. approx. 25.000x5000 mm, without anodes 1 lot anodes lot anodes (contents of lot 233) 7 euro-pallets with galvano frames euro-pallets with galvano frames 4 euro-pallets with copper and tin anodes euro-pallets with copper and tin anodes 6 transport trolleys transport trolleys 15 transport trolleys transport trolleys 5 euro-pallets with copper anodes euro-pallets with copper anodes 1 loading station Schmid, 87 Vaculine, year built 1999, serial number 87-98-392, loading station, with "Siemens" Simatic OP 7 control 1 galvanic-resist-stripping-alkaline etching line Schmid, year built 1999, galvanic-resist-stripping-alkaline etching line, type 46, s/n 46-98-390, type 24, s/n 24-98-391, infeed 0,2 - 6 m/min. working height approx. 930 mm, consisting of: infeed, pressure rinsing, spraying, pre-etching, ammoniacal etching, final etching, cascade rinsing, working width approx. 700 mm, with pipework, valves, pumps, control cabinet 1 removal station Schmid, 87 Vaculine, year built 1999, serial number 87-98-393, removal station, with "Siemens"

 

239

 

240

 

241

Lot  

242

 

243

 

244

 

245

 

246

 

247

 

248

 

249

 

250

 

251

 

252

 

253

 

254

 

255

 

256

 

257

 

258

 

259

 

260

 

261

 

262

 

263

 

264

 

265

5 euro-pallets with copper anodes euro-pallets with copper anodes 1 loading station Schmid, 87 Vaculine, year built 1999, serial number 87-98-392, loading station, with "Siemens" Simatic OP 7 control 1 galvanic-resist-stripping-alkaline etching line Schmid, year built 1999, galvanic-resist-stripping-alkaline etching line, type 46, s/n 46-98-390, type s/n 24-98-391, infeed 0,2 - 6 m/min. working height approx. 930 mm, consisting of: infeed, Number24,Description pressure rinsing, spraying, pre-etching, ammoniacal etching, final etching, cascade rinsing, working width approx. 700 mm, with pipework, valves, pumps, control cabinet 1 removal station Schmid, 87 Vaculine, year built 1999, serial number 87-98-393, removal station, with "Siemens" Simatic OP 7 control 1 loading station Löhr + Herrmann, loading station, working width approx. 800 mm 1 horizontal lead/tin stripping plant Ato, Uniplate, year built 1997, serial number 9612021, horizontal lead/tin stripping plant, speed 3 m/min., plate material FR 4, plate format 3,2 - 0,8x457x610 mm, with stripper, cascade rinsing, dryer, pipework, control cabinet, etc. 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm 1 loading station Löhr + Hermann, loading station, working width approx. 800 mm 1 tin stripping plant Höllmüller, Tin-Lead, year built 1996, serial number 2434/01-06, tin stripping plant, with stripper, 2fold cascade-rinsing, circulating water rinse, dryer, discharge, working width approx. 700 mm, with pipework, control cabinet, touch panel, pumps, etc. 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm 1 surface gold plant Büttner, surface gold plant, 16 stations, rinsing, stripping, rinsing, chemical pickling, rinsing, galv.  nickel, rinsing, Ni-activation, rinsing, galv. gold bath CC-AF, still rinse, rinse, dim. approx. 7000x2500 mm, with control cabinet, exhaust air unit 1 s/s cleaning tank s/s cleaning tank, dim. approx. 1200x600 mm 1 safety storage cabinet safety storage cabinet with various chemicals 1 rack rack with various filters 1 gas scrubber VSS, KFVG 800, year built 1999, gas scrubber, air volume 4000 m³/h, volume circulated 10 m³/h 1 KT gas scrubber VSS, TKV 1000, year built 1993, serial number 025156, KT gas scrubber, V= 4000 m³/h 1 dosing container dosing container 1 dosing container dosing container 1 dosing container dosing container 1 batching tank batching tank with pump 1 current rectifier Munk, current rectifier 1 shelving system shelving system with various spare parts 1 lot transport trolleys lot transport trolleys, approx. 20 pieces 28 tables tables 4 roller conveyors roller conveyors, dim. each approx. 2500x650 mm 1 cabinet cabinet with various contents 1 automatic electroplating system Ludy, year built 2000, serial number 800001K115, automatic electroplating system, with gangway, control cabinets, pipework, pumps, suction unit, with 2 hoisting and running gear, cap. 500/300 kg, total dim. approx. 25.000x6000 mm

 

262

 

263

 

264

265   Lot

 

266

 

267

 

268

 

269

 

270

 

271

 

272

 

273

 

274

 

275

 

276

 

277

 

278

 

279

 

280

 

281

 

282

 

283

 

284

 

285

lot transport trolleys, approx. 20 pieces 28 tables tables 4 roller conveyors roller conveyors, dim. each approx. 2500x650 mm 1 cabinet cabinet with various contents 1 automatic electroplating system Number Description Ludy, year built 2000, serial number 800001K115, automatic electroplating system, with gangway, control cabinets, pipework, pumps, suction unit, with 2 hoisting and running gear, cap. 500/300 kg, total dim. approx. 25.000x6000 mm 1 lot anodes lot anodes (contents of lot 265) 1 chemical nickel-gold plant STS, year built 1990, chemical nickel-gold plant, max. format 2600x950 mm, 21 stations, a.o. Aurolektroless SMT, rinsing, cascade rinsing, pre-immersion, Ronamerse SMT Catalyst, Ronamax SMT, stripping, cleaning, acid rinsing, with hoisting and running gear, cap. 50 kg, with control cabinets, gangway, pipework, exhaust air unit, etc. total dim. approx. 15.000x4000 mm 1 loading station Löhr + Herrmann, loading station, working width approx. 750 mm, with vacuum handling 1 deburring and brushing machine Schmid, 12 Combi Line, year built 1997, serial number 12-96-345, deburring and brushing machine, 8 modules, a.o. infeed, brushing, rinsing, drying, working width approx. 650 mm, working height 900 mm, working direction rechts/links, infeed 0,2 - 6 m/min., with "Lauer" control, type DCS 095 1 seperator/band Meiko Electronics, MSP 601, seperator/band for PCB, working width approx. 620 mm, length approx. 1000 mm 1 drill hole inspector Meiko Electronics, MHI 600, drill hole inspector for PCB, working width approx. 620 mm, mit seperator/band, type MSP 601 1 horizontal desmear plant Ato, Uniplat-P, year built 1999, serial number 9812071, horizontal desmear plant, with infeed, etchcleaner, rinsing, sweller, permanganate, reduction, dryer, discharge, speed 2 m/min., PCB format TxWxL 0,135 - 3 mm x 650/350 mm x 610/360 mm, with pipework, pumps, filters, valves, control cabinets 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm 1 separator Turbo Separator, MZA-T146415, year built 2008, serial number 11598, separator, with "Siemens" control, type TD 200 1 pumping station Platz, 400513, year built 1997, serial number 48372, pumping station, cap. 45 l/min. 1 s/s container s/s container, useable space approx. diam. 1700x800 mm, with agitator 1 drain tank drain tank for cleaning solution, contents 1800 l, material PE 1 heat recovery station heat recovery station, with s/s trestle 1 loading station Alfa, year built 1996, serial number 4046, loading station, working width approx. 700 mm 1 pre-treatment line Alfa, Uniplate/Neopact, year built 1996, serial number 512145, pre-treatment line for plated throughholes and copper plating, PCB TxWxL 102 µm - 5 mm x 650/350x610/350 mm, speed 2,5 m/min (NP), 1,6 m/min. (CU), with infeed, conditioning, rinsing, pre-immersion, conducter, immersion, selector 1 transfer station transfer station, U-shape 1 chemical pickling Ato, Neopact, chemical pickling, 105 l, 30 °C 1 back station Ato, Neopact, back station with drive 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mm x 650/350x610/350, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with current rectifier, 2x 8 V/4000 A, 1x 4 V/50 A, 1x 10 V/600 A, water cooling,  power supply error detection, pumps, etc. 1 back station Atp, Neopact, back station with drive

 

282

 

283

 

284

Lot  

285

 

286

 

287

 

288

 

289

 

290

 

291

 

292

 

293

 

294

 

295

 

296

 

298

 

299

 

300

 

301

 

302

 

303

 

304

 

305

 

306

 

307

 

308

 

309

 

310

 

311

 

312

 

313

1 chemical pickling Ato, Neopact, chemical pickling, 105 l, 30 °C 1 back station Ato, Neopact, back station with drive 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mm x 650/350x610/350, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath Numbertemperature 26 °C, with current rectifier, 2x 8 V/4000 A, 1x 4 V/50 A, 1x 10 V/600 A, water cooling,  Description power supply error detection, pumps, etc. 1 back station Atp, Neopact, back station with drive 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mmx650/350x610/350 mm, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with control cabinet, pumps, etc.  1 rinsing line Ato, Neopact, rinsing line, with dryer and discharge 1 removal station Alfa, year built 1996, serial number 4056, removal station, working width approx. 700 mm 1 IT-cabinet IT-cabinet with PC, "Hanns G" flatscreen, etc. 3 plastic containers plastic containers with membran pumps, 1 "Lutz" barrel pump, 1 plastic tub, etc. 1 disc grinding machine Wirtz, Phoenix Alpha, disc grinding machine, disc diam. approx. 200 mm 1 double magnifier Olympus, double magnifier 1 CU-scope Fischer, CU-scope 1 ISO-scope Fischer, ISO-scope 6 transport trolleys various transport trolleys 1 plastic tank plastic tank with agitator, 1 plastic tank 1 plastic collecting trough 1 rack rack with various machine accessories 1 water cooling unit water cooling unit 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm 2 cardboard boxes with accessories cardboard boxes and 1 pallet with accessories 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories

 

309

 

310

 

311

312   Lot  

313

 

314

 

315

 

316

 

317

 

318

 

319

 

320

 

321

 

322

 

323

 

324

 

325

 

326

 

327

 

328

 

329

 

330

 

331

 

332

 

333

 

334

1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories 1 storage tank Number Description Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories 1 stackable containers stackable containers with copper sludge 1 plastic recovery container plastic recovery container 1 palladium recovery year built 2001, palladium recovery via ultra filtration, average capacity approx. 100 l/h, with 2 plastic containers, "Antech" filters, rinsing tank, etc. 1 s/s recovery plant IS, FI/trex 2000, year built 1999, serial number 0236956, s/s recovery plant, cap. 400 V, 8 kW 1 light table Klimsch, light table, dim. approx. 800x600 mm 1 face and body shower face and body shower 1 industrial vacuum cleaner Ruwac, industrial vacuum cleaner, 220 V 1 drying furnace Reinhardt, LTV 150/S, year built 1991, serial number 8122, drying furnace, useable space 1,8 m³, 1 charging trolley 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7707, drying furnace, useable space 1,42 m³, 1 charging trolley 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7706, drying furnace, useable space 1,42 m³, 1 charging trolley 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7709, drying furnace, useable space 1,42 m³, 1 charging trolley 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7702, drying furnace, useable space 1,42 m³, 1 charging trolley 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7700, drying furnace, useable space 1,42 m³, 1 charging trolley 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7701, drying furnace, useable space 1,42 m³, 1 charging trolley 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7755, drying furnace, useable space 1,42 m³, 1 charging trolley 1 stripping machine EMM, 1200, year built 1990, serial number 801980489, stripping machine, max. working width approx. 1200 mm 1 loading station Löhr + Herrmann, MES 20, year built 1989, loading station 1 pre-cleaning Höllmüller, SPT-HKY 65, year built 1989, serial number 1287/4, pre-cleaning for conductive carbone lacquer printing with heating and cleaning module, discharge, speed 1,2 - 1,6 m/min., rinsing cascade 200 - 300 l/h, operating hours (read off) 1650 1 developer Holmstrands, 140033, year built 1991, serial number 140033, developer, working width approx. 600 mm 1 removal station Löhr + Herrmann, removal station, max. working width approx. 600 mm 1 developer for PCB Holmstrands, year built 1990, serial number 90058, developer for PCB, heating capacity 18 kW, with "Holmstrands" dryer, s/n 140026, y/c 1990, heating capacity 4 kW, with "Schulz-Heumer" stacker, y/c 1989

 

 

332

333

Lot  

334

 

335

 

336

 

337

 

338

 

339

 

340

 

341

 

342

 

343

 

344

 

345

 

346

 

347

 

348

 

349

 

350

 

352

 

353

 

354

 

355

 

356

 

357

 

358

 

359

 

360

 

361

Höllmüller, SPT-HKY 65, year built 1989, serial number 1287/4, pre-cleaning for conductive carbone lacquer printing with heating and cleaning module, discharge, speed 1,2 - 1,6 m/min., rinsing cascade 200 - 300 l/h, operating hours (read off) 1650 1 developer Holmstrands, 140033, year built 1991, serial number 140033, developer, working width approx. 600 mm 1 removal station NumberLöhr + Herrmann, removal station, max. working width approx. 600 mm Description 1 developer for PCB Holmstrands, year built 1990, serial number 90058, developer for PCB, heating capacity 18 kW, with "Holmstrands" dryer, s/n 140026, y/c 1990, heating capacity 4 kW, with "Schulz-Heumer" stacker, y/c 1989 5 screen print transport trolleys screen print transport trolleys 1 screen print cleaning station screen print cleaning station 1 continuous flow dryer Systronic, continuous flow dryer, with 2 meshbands, band width each 700 mm, max. infeed height approx. 70 mm, band length each approx. 4500 mm 1 stacker Lantronic, Lan 88 COL, year built 1998, serial number 81, stacker, max. working width approx. 700 mm 1 stacker Löhr + Herrmann, stacker, max. working width approx. 700 mm 1 UV-dryer Beltron, UV-dryer, with meshband conveyor and suction unit, meshband width approx. 600 mm, meshband length approx. 2000 mm 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178806, semi-automatic screen printing machine 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178803, semi-automatic screen printing machine 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178807, semi-automatic screen printing machine 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178805, semi-automatic screen printing machine 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178808, semi-automatic screen printing machine 1 rack rack with approx. 25 screen printing frames 1 workbench workbench with suction hood 1 laboratory mixer IKA, RW 28 basis, laboratory mixer 1 lot transport trolleys lot various transport trolleys, approx. 20 pieces 1 rack rack with contents, a.o. copper blanks 1 drying cabinet vertical drying cabinet for screen printing frames, dim. approx. 1500x600 mm 1 clamping table Harlacher, H 34, clamping table, dim. approx. 2000x2000 mm, with 25 clamping installationen 1 clamping table clamping table, with 16 drawing devices, dim. approx. 2000x2000 mm 1 worktable worktable, dim. approx. 2000x2000 mm 1 compressor Jun Air, 4000-40 MO, year built 2002, serial number 524142, compressor, operating hours (read off) 136 (for lot. 353) 1 rack rack with approx. 200 screen printing frames 1 rack rack with approx. 50 screen printing frames 1 light table Klimsch, LT 120, year built 1989, light table with magnifier, dim. approx. 1500x1500 mm 1 light table Klimsch, light table, dim. approx. 600x400 mm 1 light table

 

357

 

358

 

359

Lot  

360

 

361

 

362

 

363

 

364

 

365

 

366

 

367

 

368

 

369

 

370

 

371

 

374

 

375

 

376

 

377

 

378

 

379

 

380

 

381

 

382

 

383

 

384

 

385

 

386

 

387

 

388

Jun Air, 4000-40 MO, year built 2002, serial number 524142, compressor, operating hours (read off) 136 (for lot. 353) 1 rack rack with approx. 200 screen printing frames 1 rack rack with approx. 50 screen printing frames 1 light table LT 120, year built 1989, light table with magnifier, dim. approx. 1500x1500 mm NumberKlimsch, Description 1 light table Klimsch, light table, dim. approx. 600x400 mm 1 light table Klimsch, light table with magnifier, dim. approx. 1000x1000 mm 1 screen printing frame cleaning station 2688, screen printing frame cleaning station 1 clamping table clamping table with clamping installation, pivoting, mobile, dim. approx. 1500x1500 mm 1 copying lamp Technigraf, Akticap 5000-AC80194, serial number 224718, copying lamp 1 drying cabinet drying cabinet for screen printing frames, horizontal, 4 drawers 1 rack rack with approx. 20 screen printing frames 1 drying cabinet Reinhardt, LTV 150/S, year built 1989, drying cabinet 1 rack rack with approx. 15 screen printing frames 1 cleaning station cleaning station 1 semi-automatic screen printing machine Argon, Hydra S, semi-automatic screen printing machine 1 agitator Pendraulik, agitator with table 1 loading station Schmid, Vaculine, year built 1999, serial number 87-99-104, loading station, max. working width 650 mm, working height 950 mm, with vacuum handling and "Siemens" control Simatic OP 7 1 pre-treatment solder resist mask Schmid, 26, year built 1999, serial number 26-99-103, pre-treatment solder resist mask, with etching and cleaning modules, switch cabinet, infeed 0,2 - 6 m/min., speed 0,2 - 6 m/min., PCB thickness 0,2 - 6 mm 1 pumice powder brushing machine IS, Pumiflex SHD 24, year built 1999, serial number 0121260, pumice powder brushing machine, working width approx. 600 mm, with "Siemens" control OP 15 1 removal station Schmid, Vaculine, year built 1999, serial number 87-99-105, removal station, with vacuum handling, max. working width 650 mm, working height 950 mm, with "Siemens" control OP 7 1 pre-cleaning IS, serial number 0146422, pre-cleaning 1 safety storage cabinet Düperthal, 2.29.00, serial number 229300470173, safety storage cabinet 1 safety storage cabinet Düperthal, 2.12.925.2, serial number 249112041158, safety storage cabinet 1 s/s mixer Pendraulik, s/s mixer 7 ball tables ball tables, dim. approx. 1500x900 mm 1 loading station Kuttler, MLE 60, year built 2000, serial number 2560, loading station, max. working width approx. 600 mm, PCB thickness 0,2 - 4,2 mm, with "Kuttler" control 1 cleaning module Höllmüller, cleaning module with transfer station, operating hours (read off) 3314 1 pumice powder brushing machine IS, serial number 0103508, pumice powder brushing machine 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105552, transfer station, L-shape 1 pre-heating Kuster, Probimer 130, pre-heating 1 transfer station

 

384

 

385

 

386

Lot  

387

 

388

 

389

 

390

 

391

 

392

 

393

 

394

 

395

 

396

 

397

 

398

 

399

 

400

 

401

 

402

 

403

 

405

 

406

 

407

 

408

 

409

 

410

 

411

 

412

Kuttler, MLE 60, year built 2000, serial number 2560, loading station, max. working width approx. 600 mm, PCB thickness 0,2 - 4,2 mm, with "Kuttler" control 1 cleaning module Höllmüller, cleaning module with transfer station, operating hours (read off) 3314 1 pumice powder brushing machine IS, serial number 0103508, pumice powder brushing machine 1 transfer station Probimer 609, year built 1991, serial number 91105552, transfer station, L-shape NumberKuster, Description 1 pre-heating Kuster, Probimer 130, pre-heating 1 transfer station Kuster, Probimer 607, year built 1991, serial number 91104314, transfer station, cap. 0,6 Nm³/h, 0,2 kW 1 transfer station Kuster, Probimer 607, transfer station 1 casting module Kusag/Bürkle, Probimer 150 C, year built 1991, serial number 5077, casting module 1 conveyor belt Bürkle, Probimer 150 LTV, conveyor belt, dim. approx. 1500x650 mm 1 conveyor belt Bürkle, Probimer LTV, year built 1991, serial number 5072, conveyor belt, dim. approx. 1500x650  mm 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.131, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm 1 transfer station Kuster, Probimer 601, year built 1991, serial number 01104514, transfer station, operating hours (read off) 83.310 1 continuous flow furnace Pagendarm, continuous flow furnace, dim. approx. 2000x1500 mm 1 transfer station Kuster, Probimer 607, transfer station, dim. approx. 500x650 mm 1 conveyor belt Bürkle, 150 LTV, conveyor belt, dim. approx. 1500x700 mm 1 conveyor belt Bürkle, 150 LTV, year built 1991, serial number 5073, conveyor belt, dim. approx. 1500x700 mm 1 Probimer casting module Bürkle/Kusag, 150 C, year built 1991, serial number 5078, Probimer casting module 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.130, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105551, transfer station, dim. approx. 1000x700 mm, with drying installation 1 switch cabinet switch cabinet 1 switch cabinet switch cabinet 1 switch cabinet switch cabinet 1 switch cabinet switch cabinet 1 switch cabinet switch cabinet 1 switch cabinet switch cabinet 1 switch cabinet switch cabinet 1 switch cabinet

 

407

 

408

 

409

 

410

Lot  

411

 

412

 

413

 

414

  414A

 

415

 

416

 

417

 

418

 

419

 

420

 

421

 

422

 

423

 

424

 

425

 

426

 

427

 

428

 

429

 

430

 

431

 

432

 

434

 

435

  436A  

438

1 switch cabinet switch cabinet 1 switch cabinet switch cabinet 1 switch cabinet switch cabinet 1 switch cabinet cabinet Numberswitch Description 1 switch cabinet switch cabinet 1 switch cabinet switch cabinet 1 switch cabinet switch cabinet 1 switch cabinet switch cabinet 1 vacuum distillery ITC, Vakumer-SM, year built 1993, serial number 0586466, vacuum distillery (for recovery of solvents, usually used for photosensitive solder resist masks), capacity approx. 50 l/h, storage tanks approx. 300 l, with accessories and control cabinet 5 transport trolleys Kuttler, transport trolleys 1 transport trolleys various transport trolleys, approx. 40 pieces 5 transport trolleys Kuttler, transport trolleys 5 transport trolleys Kuttler, transport trolleys 1 exposure machine ORC, HMW 680 GW, year built 1998, serial number 35800, exposure machine 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27599, exposure machine 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28130, exposure machine 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28077, exposure machine 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27600, exposure machine 1 LLD-camera film adjustment machine Printprocess, Expo Aligner, year built 2008, serial number 08051515, LLD-camera film adjustment machine for PCB exposure, datum hole up to 4 mm, dim. 775x700x430 mm 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp 1 light table Mina, light table, dim. approx. 1200x600 mm 2 hand lever punches hand lever punches 1 lot overlays lot overlays for transport trolleys 1 Probimer developing line Schmiedeskamp, 475M4, year built 1991, serial number 980, Probimer developing line, dim. approx. 9000x2000 mm 1 centrifuge Turbo Separator, LG 14H25, year built 1989, serial number 1425646, centrifuge, filling capacity 35 kg, 3000 rpm 1 cabinet cabinet with spare parts 1 vertical continuous flow dryer Maas, VDH 352-63, year built 1999, serial number 1008, vertical continuous flow dryer, PCB format

 

434

 

435

436A   Lot  

438

 

439

 

440

 

441

 

442

 

443

 

444

 

445

 

446

  446A  

447

 

448

 

449

 

450

 

451

 

452

 

453

 

454

 

455

 

455

 

456

 

457

 

458

 

459

lot overlays for transport trolleys 1 Probimer developing line Schmiedeskamp, 475M4, year built 1991, serial number 980, Probimer developing line, dim. approx. 9000x2000 mm 1 centrifuge Turbo Separator, LG 14H25, year built 1989, serial number 1425646, centrifuge, filling capacity 35 kg, 3000 rpm 1 cabinet Number Description cabinet with spare parts 1 vertical continuous flow dryer Maas, VDH 352-63, year built 1999, serial number 1008, vertical continuous flow dryer, PCB format 610x610 mm/350x400 mm, PCB thickness 0,3 - 3 mm, heating capacity 140 kW, dim. approx. 18.000x2500x3000 mm, useable space 12,8 m³, steam room 18,7 m³, max. temperature 170 °C 1 roller conveyor roller conveyor, dim. approx. 800x800 mm 1 removal station Kuttler, MUE 60, year built 1999, serial number 2244, removal station, with "Kuttler" control, PCB thickness 0,2 - 4,2 mm 1 buffer station Kuttler, MB 60, year built 1999, serial number 2245, buffer station, PCB thickness 0,2 - 4,2 mm 10 transport trolleys Kuttler, transport trolleys 10 transport trolleys Kuttler, transport trolleys 1 loading station Löhr + Herrmann, loading station 1 solder resist exposure line Schmiedeskamp, 3/4 SM4, year built 1999, serial number 011, solder resist exposure line, infeed width approx. 670 mm, dim. approx. 4000x2000 mm 1 removal station Löhr + Herrmann, removal station, working width approx. 670 mm 1 cabinet cabinet with spare parts 1 lot transport trolleys lot various transport trolleys, approx. 15 pieces 1 loader Löhr + Herrmann, loader, working width approx. 700 mm 1 UV-dryer Beltron, 80/120W/II+II, year built 1998, serial number 6911097, UV-dryer, dim. approx. 2000x2000 mm, cap. 4000 mg/cm², max. film width 700 mm, PCB formats 250x300 mm, 720x760 mm, PCB thickness 0,4 - 5 mm 1 cooling line Beltron, KM 2000, year built 1998, serial number 6921097, cooling line with meshband conveyor, dim. approx. 3000x2000 mm, meshband width approx. 750 mm, infeed height approx. 30 mm, transport speed 1 - 6 m/min. 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm 1 table table with magnifier 1 table table with magnifier 1 double magnifier Olympus, double magnifier 9 transport trolley Kuttler, transport trolley 10 PCB transport trolleys Kuttler, PCB transport trolleys 10 transport trolley transport trolley 1 loader Schmid, Vaculine, year built 1999, serial number 87-98-388, loader, with "Siemens" control Coros OP 7, max. working width approx. 600 mm, with vacuum handling 1 chemical pre-cleaning Schmid, 25-02-189, year built 2002, chemical pre-cleaning, with "Siemens" control Simatic OP 17, with switch cabinet 1 centrifuge Schmid/Turbo Separatur, Cecumat IV/36-02-190, year built 2002, centrifuge, filling capacity 35 kg,

 

456

 

457

 

458

Lot  

459

 

460

 

461

 

462

 

463

 

464

 

465

 

466

 

467

 

468

 

469

 

470

 

471

 

472

 

473

 

474

 

475

 

476

 

477

 

478

 

479

 

480

 

481

 

482

 

483

 

484

Kuttler, PCB transport trolleys 10 transport trolley transport trolley 1 loader Schmid, Vaculine, year built 1999, serial number 87-98-388, loader, with "Siemens" control Coros OP 7, max. working width approx. 600 mm, with vacuum handling 1 chemical pre-cleaning 25-02-189, year built 2002, chemical pre-cleaning, with "Siemens" control Simatic OP 17, NumberSchmid, Description with switch cabinet 1 centrifuge Schmid/Turbo Separatur, Cecumat IV/36-02-190, year built 2002, centrifuge, filling capacity 35 kg, 3000 rpm 1 removal station Schmid, Vaculine, year built 1999, serial number 87-98-389, removal station, with "Siemens" control Sinumatic OP 7, with vacuum handling 3 switch cabinets Schmid, switch cabinets 1 hand laminator BASF, year built 1989, serial number 80012, hand laminator, max. working width approx. 600 mm 1 input station Löhr + Herrmann, input station, max. working width approx. 700 mm 1 cleaner Rayon, RY 505 E, serial number RP11660, cleaner, max. working width approx. 600 mm 1 automatic laminator Dynachem, 1600 IV, year built 1991, serial number 06201031, automatic laminator, max. working width 800 mm, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 5 mm 1 cooling unit Löhr + Herrmann, AKE 12, year built 1989, serial number 2200201/94, cooling unit 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm 1 loader Löhr + Herrmann, loader, working width approx. 800 mm 1 transfer station transfer station, dim. approx. 350x750 mm 1 pre-heating Morton, 830, year built 1996, serial number 07101042, pre-heating, infeed 5 m/min., thickness 0,1 5 mm 1 cleaner Toyo, Qui-Clean-Blow 3-S, year built 1996, serial number 9601631, cleaner 1 automatic laminator Dynachem/Morton, 1600 IV, year built 1996, serial number 06201116, automatic laminator, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm 1 cooling unit Löhr + Herrmann, AKE, year built 1989, serial number 22002DDD101, cooling unit 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm 5 ball tables ball tables, dim. approx. 2000x1000 mm 1 trestle trestle for laminating rolls 8 transport trolleys transport trolleys 1 shelving system shelving system with maschine parts, length approx. 3000 mm 1 mandrel cart mandrel cart 1 light table light table, dim. approx. 1000x800 mm 7 ball tables ball tables, dim. approx. 2000x1000 mm 1 lot transport trolleys lot transport trolleys, approx. 35 pieces 1 light table light table, dim. approx. 1000x600 mm 1 light table light table, dim. approx. 1200x800 mm

 

480

 

481

 

482

483   Lot  

484

 

485

 

486

 

487

  487A  

488

 

489

 

490

 

491

 

492

 

493

 

494

 

495

 

496

 

497

 

498

 

499

 

500

 

501

 

502

 

503

 

504

 

505

 

506

 

507

 

508

 

509

 

510

1 light table light table, dim. approx. 1000x800 mm 7 ball tables ball tables, dim. approx. 2000x1000 mm 1 lot transport trolleys lot transport trolleys, approx. 35 pieces 1 light table Number Description light table, dim. approx. 1000x600 mm 1 light table light table, dim. approx. 1200x800 mm 1 vertical cleaner Teknek, VCM750MUF3/230/50, year built 1999, serial number 8014, vertical cleaner 1 light table light table, dim. approx. 800x600 mm 1 exposure unit ORC, Opti-Beam, serial number 162/163, exposure unit, max. working surface approx. 800x650 mm 1 exposure unit ORC, Opti-Beam, exposure unit, max. working surface approx. 800x650 mm 1 input station Löhr + Herrmann, input station, working width approx. 700 mm 1 cleaner Mikro Klean, cleaner 1 exposure machine Hakuto, 5010 C, year built 1992, serial number EP166, exposure machine, PCB formats 330x250 mm, 610x510 mm, PCB thickness 0,1 - 2,0 mm, image recognition via CCD camera 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm 1 loader Löhr + Herrmann, loader, working width approx. 800 mm 1 cleaner Rayon, RY 505 E, year built 1990, serial number RP11843, cleaner 1 exposure machine Süss Microtec, MA 600 PCB, year built 2004, serial number 022, exposure machine, PCB formats  636x636 mm, working direction right/left, accuracy +/- 15 µm, with "Siemens" control, type Simatic MP 270 1 transfer station transfer station 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm 1 cabinet cabinet with various exposure unit-accessories 1 cabinet for drawings cabinet for drawings with contents, 10 drawers 1 cabinet for drawings cabinet for drawings with contents, 10 drawers 2 tables tables with 1 magnifier 1 cabinet cabinet with contents (glas panes) 1 cabinet cabinet with contents (glas panes) 1 writing desk writing desk with magnifier 1 industrial vacuum cleaner Kränzle, Vento 25, industrial vacuum cleaner 1 loader Löhr + Herrmann, loader, working width approx. 600 mm 1 cover sheet remover Löhr + Herrmann, cover sheet remover 1 buffer Löhr + Herrmann, buffer, working width approx. 700 mm 1 conveyor belt conveyor belt, dim. approx. 1000x700 mm 1 exposure line Höllmüller, CS 65 R/L, year built 1994, serial number 2282, exposure line, working direction right/left 1 outfeed station

 

505

 

506

 

507

 

508

Lot  

509

 

510

 

511

 

514

 

515

 

516

 

517

 

518

 

519

 

520

 

521

 

522

 

523

 

524

 

525

 

526

 

527

 

528

 

529

 

530

 

531

 

532

 

533

 

534

 

535

 

536

 

537

 

538

 

539

1 loader Löhr + Herrmann, loader, working width approx. 600 mm 1 cover sheet remover Löhr + Herrmann, cover sheet remover 1 buffer Löhr + Herrmann, buffer, working width approx. 700 mm 1 conveyor belt belt, dim. approx. 1000x700 mm Numberconveyor Description 1 exposure line Höllmüller, CS 65 R/L, year built 1994, serial number 2282, exposure line, working direction right/left 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm 1 loading station Höllmüller, loading station, working width approx. 700 mm 1 conveyor belt conveyor belt, dim. approx. 800x800 mm 1 conveyor belt conveyor belt, dim. approx. 800x800 mm 1 exposure line Höllmüller, STDM-FHKY/65, year built 1984, serial number 2282/1-4, exposure line 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm 1 double magnifier Olympus, double magnifier with table 1 table table with magnifier 1 table table with magnifier 10 transport trolleys various transport trolleys 1 cleaning station Büttner, cleaning station, dim. approx. 1500x1000x1800 mm 1 lot overlays lot overlays for transport trolleys, approx. 100 pieces 1 table table with magnifier 1 rack rack with machine accessories 1 plotter Orbotech, LP 5008X, year built 1995, plotter 1 film developer Orbitech, Multiline Pro 72, year built 2001, film developer 1 plotter Orbotech, LP 5008X, year built 1994, plotter 1 film developer Orbitech, Multiline Pro 72, year built 2000, film developer 1 micro modifier 5500 XP, micro modifier 1 film punch Multi Line, Opti Line, year built 1990, film punch, external layers, table dim. 800x640 mm 1 Diazo copier Theimer, Spektra Proof Daylight 95, Diazo copier 1 Diazo dry developer Hela, Diazo dry developer 1 anti-static auto film cleaner anti-static auto film cleaner 1 film sealing device Maguefa, film sealing device, working width 640 mm 1 transmitted light densitometer X-Rite, transmitted light densitometer 1 lot machine spare parts lot machine spare parts and installation material, a.o. pumps, electric motors, plastic tubes, with racks and 4 lockers 1 pre-heater Dynachem, 830, pre-heater 6 industrial vacuum cleaning unit Riba, VS 5159, industrial vacuum cleaning unit

 

535

 

536

 

537

538   Lot  

539

 

540

 

541

 

542

 

544

 

545

 

546

 

547

1 film sealing device Maguefa, film sealing device, working width 640 mm 1 transmitted light densitometer X-Rite, transmitted light densitometer 1 lot machine spare parts lot machine spare parts and installation material, a.o. pumps, electric motors, plastic tubes, with racks and 4 lockers 1 pre-heater Number Description Dynachem, 830, pre-heater 6 industrial vacuum cleaning unit Riba, VS 5159, industrial vacuum cleaning unit 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, vacuum pumps, pumps 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, pumps and various installation material 1 lot installation material lot installation material and various spare parts, a.o. obsolete drilling spindles, drives 1 gas scrubber VSS, KFVG 1000, gas scrubber, air volume max. 4000 Nm³/h, contaminants HCI, receiver 500 l, with switch cabinet 1 chemical supply and disposal plant chemical supply and disposal plant for DES-plant, consisting of: 3 containers, etching buffer container 2,5 m³, soda solution 2,5 m³, potassium hydroxide solution 2,5 m³, with accessories 1 storage container storage container (MEC-Brite), with pump 1 container container Epsom salt, with pump

General conditions Live veiling (+ webcast) TroostwijkAuctions.com General Terms and Conditions of Auction 1.     The auction is exclusively carried out on the basis of the general conditions of auction. When participating in the auction, visitors and customers acknowledge and accept these conditions. 2.     The general conditions of auction also apply for private treaty sales apart from any auction. 3.     By entering the viewing premises and auction hall, visitors, potential buyers, buyers and their representatives waive explicitly all rights to claim compensation from the auctioneer or its client for damage to their person or property. 4.     Each person attending shall be held liable for any damages caused by him during the viewing, auction, dismantling and removal of the goods.  5.     The auction takes place in the name of and for the account of the client. 6.     The items to be auctioned are specified in the auction catalogue. As a rule, auctioning proceeds according to consecutive catalogue numbers. Troostwijk is entitled to combine, to delete and to change the sequence (of) catalogue numbers in course of the auction. 7.     Troostwijk is only liable for preparation and implementation of the auction in accordance with statutory rules. Otherwise the following applies: a)     Claims by the client or the auction buyer, which are based on breaches of duty, in particular with regard to any advice on matters of valuation and to defect or incomplete objects, are excluded. b)   Descriptions of items by Troostwijk, e.g. in the sales catalogue or in a list, are based on information supplied by the client. Troostwijk is only liable for correct transmission and not for the objective accuracy of such information. c)   Specifications are supplied by Troostwijk only in order to help distinguishing items and do in no case represent a  guarantee within the  meaning of § 444 German Civil Code or an agreement as to the characteristics of items of sale within the meaning of § 434 Section 1 Sentence 1  German Civil Code. d)    The items are used. Troostwijk does not sell in its own name and thus accepts no liability for material or legal defects and is not responsible for volume, quality, dimensions, years of manufacture or completeness. e)   The above restrictions do not apply, if Troostwijk acts deliberately or by gross negligence or if physical injuries are caused. 8.     The client is liable to the auction buyer for defects of items under the condition of following regulations: a)     The auction buyer had the opportunity for a prior inspection of the items. The sale is concluded as seen and any guarantee for material or legal defects is excluded. b)   The client excludes any liability with respect to particular characteristics or to the possibility of regular use of the items. c)   The client excludes any liability for advertising statements by the manufacturer. d)    The above restrictions do not apply if the client deliberately causes damage or is guilty of gross negligence or if physical injury is caused. e)   Consumers as defined in the German Civil Code are subject to the statutory rules relating to defects. The limitation period is shortened to 1  year. 9.     Accepted is the bid of the highest bidder after the highest bid has been repeated three times by the auctioneer and still higher bids have not been received. The auctioneer has the right to decline bids, to reject bids regarded as too low and to refuse and withdraw acceptance of bids, respectively to accept a bid only under reservation, if there are particular reasons for doing so. If a bid is accepted under reservation, this does not represent the right to purchase the lot. As from the call-on the bidder will be bound to his bid for a certain period of time as agreed upon between the two parties. 10.  If several persons make the same bid and if no higher bid is made after three calls, the sale will be decided by casting lots. The auctioneer may revoke his acceptance of a bid and offer the item in question again, if a higher bid made in time was not noticed by error provided the bidder complains immediately or if the acceptance was in any other way questionable. 11.  In all cases of doubt as to the validity of the highest bid, in particular if the highest bidder does not want to maintain his bid or if there is doubt about the knockdown, the decision of the auctioneer alone will be binding.

www.TroostwijkAuctions.com

12.  Troostwijk may also permit written bids, these to be submitted before the auction. If an item is not clearly identified, the catalogue number will be decisive. Such bids imply unreserved acceptance of these general conditions of auction. The price offered in writing will be regarded as the knockdown price subject to the addition of auctioning charge and legal value added tax (VAT). The amount of a written bid must be announced to the audience before the auctioning of the item concerned begins. By submitting a written bid the bidder authorises the auctioneer to disclose the bid and to accept the knockdown.

accept a bid only under reservation, if there are particular reasons for doing so. If a bid is accepted under reservation, this does not represent the right to purchase the lot. As from the call-on the bidder will be bound to his bid for a certain period of time as agreed upon between the two parties. 10.  If several persons make the same bid and if no higher bid is made after three calls, the sale will be decided by casting lots. The auctioneer may revoke his acceptance of a bid and offer the item in question again, if a higher bid made in time was not noticed by error provided the bidder complains immediately or if the acceptance was in any other way questionable. 11.  In all cases of doubt as to the validity of the highest bid, in particular if the highest bidder does not want to maintain his bid or if there is doubt about the knockdown, the decision of the auctioneer alone will be binding. 12.  Troostwijk may also permit written bids, these to be submitted before the auction. If an item is not clearly identified, the catalogue number will be decisive. Such bids imply unreserved acceptance of these general conditions of auction. The price offered in writing will be regarded as the knockdown price subject to the addition of auctioning charge and legal value added tax (VAT). The amount of a written bid must be announced to the audience before the auctioning of the item concerned begins. By submitting a written bid the bidder authorises the auctioneer to disclose the bid and to accept the knockdown. 13.  When a sale has been made the buyer must immediately pay Troostwijk a deposit of at least 50% of the purchase price in cash or by bank certified crossed cheque, for which Troostwijk will issue a receipt. All payments must be made in € (Euro). No other form of payment will be accepted. The remainder must be paid at the latest on one of the collection days specified in these general conditions of auction, however before the start of dismantling/collection. 14.  The purchaser owes the client the purchase price in € (Euro), which consists of the net amount, an auctioning charge (see Special Conditions) and possible value added tax (VAT) ex foundation, ex store or ex location. After full payment the auction buyer will receive an invoice as evidence of payment during the auction or upon collection. All invoices issued during or after the auction are under reserve and subject to later control and possible correction. The right to correct errors is reserved. 15.  On knockdown the risk of accidental destruction of items purchased as well as the risk of loss or damage by fire, theft and burglary passes to the auction buyer. 16.  Knockdown obliges the buyer to accept and pay for the goods. If a buyer refuses to accept goods or fails to pay the full purchase price, including any premium or remaining amounts when due, interest will be charged at the statutory rate. In the case of a delay in payment or acceptance Troostwijk may also claim compensation as provided by law. 17.   The compensation may be covered by selling the item in an auction to another buyer. Any costs thus incurred or possible difference resulting  from a lower sales price shall be borne by the first auction buyer. Troostwijk may offset its claims against payments already received. The first auction buyer is not entitled to claim any positive proceeds obtained from such a resale. 18.  Surrender or disassembling of the auctioned items may only occur after complete payment has been received. All rights of ownership of the items shall remain with the original owner until full payment has been received. 19.  Troostwijk reserves the right to demand payment of a security deposit for objects which, when being dismantled, could cause damage to real estate and/or property of third parties. The objects in question and the amount of the deposits required will be announced during the auction.  20.  Dismantling and removal have to be accomplished within the deadlines agreed upon with Troostwijk and its client. Collection of the auctioned goods can be effected after complete payment. Removal will not be possible on Saturdays, Sundays and national holidays. The purchaser will be held liable for any costs arising in the event of non-compliance with the specified collection deadline or date. 21.  Place of jurisdiction and performance for claims against Troostwijk is exclusively Cologne. German law applies and the provisions of the UN Uniform Law Relating to the International Sale of Goods are hereby excluded. 22.  If any of the above terms are wholly or partly invalid, this will not affect the validity of the remaining terms.  Important information for foreign customers: Transmittal of the invoice and delivery of the acquired merchandise will only take place after payment in full either by cash, bank certified crossed cheque or by irrevocable payment into our account. The auctioneer is justified to charge the buyer with a bank charge of a percentage of 1.5 thousandth part of each amount for cashing foreign cheques and for payments into our account. Customers from countries not belonging to the European Community: Foreign buyers from countries not belonging to the European Community have to pay the legal German VAT as deposit to the auctioneer. After receipt of the original export documents, which must be stamped officially to prove that the export has taken place, the auctioneer will then refund the paid German VAT. Customers from countries belonging to the European Community: All foreign buyers from countries belonging to the European Community must inform us of their VAT NUMBER (VAT-id.no.) to the auctioneer. If a buyer does not furnish this proof, the auctioneer has to charge the legal German VAT. This VAT amount cannot be refunded. 

www.TroostwijkAuctions.com