PRODUCT SPECIFICATIONS MODEL 8218 LED BASKETBALL SCOREBOARD INDOOR SCOREBOARD

8218

Basketball Volleyball Wrestling Segment Timing

OVERALL DIMENSION INFORMATION DISPLAYED

6’ 10”high x 12’ wide x 5” deep. (w/ EMC, 8’2”high x 10’ wide x 5” deep.)

DIGITS

18”, 16”, 14” Bright Red and Amber, 7-Segment LEDs.

INDICATORS CAPTIONS

2” Red and Amber LED Indicators.

HORN CONSTRUCTION STANDARD COLORS (Custom Colors Available)

Includes external 100 dB horn. 120dB Trumpet horn is available.

ELECTRONICS SERVICING MICROPROCESSOR CONTROL CONSOLE

100% solid state, microprocessor controlled system.

JUNCTION BOX DATA CABLE POWER REQUIREMENTS INSTALLATION

One dual-system capable junction box, 4” x 2” with cover and ethernet cable. (Hardwire)

WEIGHT WARRANTY

Net 300 lbs / Shipping 525 lbs. (w/ EMC, Net 359 lbs / Shipping 600 lbs)

Game Time, Home and Guest Score, Period, Time Outs Left, Team Fouls/Score, Bonus, Double Bonus, Possession. Information may vary depending on variations.

White vinyl letters. 5” extruded aluminum frame, .093” thick. Faces made from shatter proof polycarbonate.

Front access for ease of servicing. Plug in modules for ease of replacement. Sold separately. Extruded Aluminum, high impact low profile microprocessor control console, latest state of the art, user friendly. Size: 13.25” wide x 5” high x 9” deep. Weight: 6 lbs. Microprocessor to be supplied with 25 feet of cable (hardwire). Microprocessor control console with membrane keyboard provides for direct entry of all information. Radio Control is available. Twisted pair, direct burial, RJ45 Connectors (Hardwire). 115/230 VAC. 50/60 Hz. Minimum one 20A circuit is recommended. May be mounted to nearly any wall surface. Five year guarantee against defects in materials and workmanship. Factory repair service for parts in warranty. Union label. UL Certified.

STANDARD VARIATIONS - Add suffix to model number in order that they appear below (see examples on next page) Without Time Outs Left. Model + C Team Fouls/Score manufactured with “88” digits rather than “18” - ideal for wrestling. Model + X 6” LED Electronic Captions in place of Fouls, Player Foul sections. Model + EC 6” LED Team Names (8x48 Matrix). Model + TN Everbrite Message Center built into the cabinet. (9” High Text, 8x112 Matrix) Model + EMC Logo/Sponsor area in place of Player Foul. Model + LOGO Radio upgrade. 2.4 GHz spread spectrum, 1500’ expected range. Model + RV2 www.allamericanscoreboards.com

Specifications subject to change without notice.

REV. 4/7/2015

PRODUCT SPECIFICATIONS MODEL 8218 LED BASKETBALL SCOREBOARD EXAMPLES OF VARIATIONS

This page shows samples of boards within the 8218 family. Not all “Standards” are shown. Boards that fall outside of these options will be considered custom and will require additional engineering.

8214C

8218CLOGO

8218CTN

8218TN

8218CXECTN 8218EMC

INDOOR SCOREBOARD INSTALLATION

REFER TO ENGINEERED DRAWINGS FOR ACTUAL MEASUREMENTS

Scoreboard MUST be mounted in at least 4 points. Mounting Brackets are supplied on the top and bottom of scoreboard. Refer to supplied engineering drawing for proper measurements and number of mounting points. Using lifting angle (attached to top mounting brackets), lift scoreboard to desired location and bolt to wall. Because wall types may vary, type of bolt cannot be recommended nor supplied by All American Scoreboards. Refer to scoreboard weight and wall type before determining installation method. In rare cases, additional structure may be necessary. All American Scoreboards (AAS) and/or Everbrite, LLC shall not be held liable for improper installation. AAS recommends the scoreboard be installed by a licensed contractor, and must meet all local and national building codes. AAS recommends using a boom, forklift, or crane of suitable size to use in installation.

6’

The horn may be installed by removing the 4x4 backing, mounting the back to a solid wall and replacing the front of the unit. Plug the cord in the horn outlet on the top left of the scoreboard.

Controller and Power Supplies

8’

Hardwire Connection / Hardwire Override

To Access Digits and Internal Components To access the internal components (Digits, Indicators, Power Supplies, PC Boards), simply remove the extruded front angle on the right side of the scoreboard. The controller plate and power supplies will be located behind the home score (guest score in baseball) on the left side of the scoreboard. Slide the face panel out far enough to reach the component that needs to be replaced or serviced. AAS recommends using a lift to service scoreboard. Use extreme caution when handling face panels.

LIFTING BRACKET MOUNTING BRACKET

Hard Wire Setup / Hardwire Override Capable Using a Dual Capable Junction Box

All radio scoreboards have the ability to be used via hardwire. When installed properly, the radio on the scoreboard will turn off when a console is plugged into the hardwire input (console still sends radio signal). Data travels over leads 4 & 5, while the hardwire override signal travels over 3 & 6. A Radio board may also pass data to a hardwired board using The same wiring methods. The 8000 Series Console can plug directly into the scoreboard via a standard CAT5 cable and RJ45 connections. It may be necessary or convenient to use a data splitter. 123

45 6 7

Outdoor boards will require a water tight junction box. Data connections will be directly connected to the receiver board in scoreboard. Data connection and AC power cannot run in same conduit.

8

Male RJ45 Connector

J101

RJ45

Scoreboard 1+2 1 2 3 4 5 6 7 8

Scoreboard 1

Scoreboard 2 BROWN

GREEN

BROWN / WHITE

8 7 6 5 4 3 2 1

BLUE

J103

BLUE / WHITE

GREEN / WHITE

Scoreboard 1

GREEN / WHITE

GREEN BLUE / WHITE BLUE

GREEN

GREEN / WHITE

BROWN / WHITE BROWN

1 2 3 4 5 6 7 8

SCBD 2

4

SCBD 2

6

SCBD 1 & 2

= STANDARD WIRING (HARDWIRE ONLY)

GREEN

SCBD 1 SCBD 1

BLUE

SCBD 1

GREEN / WHITE

8000 Series Multi-Sport Con

sole

= ADDITIONAL WIRING FOR HARDWIRE OVERRIDE (RADIO SCOREBOARDS WITH HARDWIRE OPTION)

BLUE / WHITE

REQUIRES DIODE

RADIO UNITS ONLY TRANSMITTER MODULE FCC ID:KQL-PKLR2400-200 IC:22683911808A3 17 WARNING! This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Setup Instructions: Press once to turn on. Follow prompts on screen. Press

WARNING! This equipment has been approved for mobile applications where equipment should be used at distances greater than 20cm from the human body (with the exception of hands, wrists, feet and ankles). Operation at distances less than 20cm is strictly prohibited. Excessive RF exposure should be avoided.

and hold to turn off.

SCBD 2

REQUIRES DIODE

GREEN / WHITE

STORING:

Battery should be fully charged when storing, and should be kept at room temperature. Recharging once every 30 to 45 days of storage is recommended. If batteries are stored longer, it may take two or three cycles before full run time is restored.

NUMBERS REFER TO PINS ON RJ45 CONNECTOR

Back of Console

4 Conductor Twisted Data Cable (Length Specified w/ Order) TO JUNCTION BOX (HARDWIRE ONLY)

4 - WHITE 5 - GREEN 6 - BLACK

3 - RED

THESE COLORS REFER TO AAS 4-CONDUCTOR SHIELDED CABLE

4 - WHITE 5 - GREEN 6 - BLACK

3 - RED

3 - RED

4 Conductor Twisted Data Cable (Length Specified w/ Order) 4 - WHITE 5 - GREEN 6 - BLACK

3

BROWN

R B G W S

3

BROWN / WHITE

R B G W S

4

25 Ft CAT 5 CABLE

R B G W S

5

Scoreboards 1 & 2

1 2 3 4 5 6 7 8 RJ45

RJ45 5

Scoreboard 2

J102

RECEIVER BOARD IN SECONDARY BOARD RECEIVER BOARD IN SCOREBOARD

Surface Mount Jack

(THIS BOARD MAY BE HARDWIRED OR RADIO)

SCBD DATA

4

6

HARDWIRE OVERRIDE

3 D1

D2

D3

D4

D5

D6

D1

D2

D3

*Actual scoreboard configurations may differ.

2

RECEIVER BOARD IN SCOREBOARD

D4

8

D5

7

D6

D1

D2

D3

D4

D5

D6

Scoreboard 1

Secondary Scoreboard, Stat Panel, Etc.

5

1

Scoreboard 2 or Auxilarary Board (Scoreboard, Timer, Pitch Count, Shot Clock, etc)

PRODUCT SPECIFICATIONS MODEL 8218 LED BASKETBALL SCOREBOARD

70.875”

12'-0" 144.00

70.875”

84.3125” [6'-10"] 82.00

5.00

70.875”

12'-0" 144.00

70.875”

100.3125”

8'-2" 98.00

W/ EMC OPTION, HEIGHT IS 1’4” TALLER

5.00

PRODUCT SPECIFICATIONS TYPICAL INDOOR SPONSOR PANEL INSTALLATION

MOUNTING HARDWARE (NOT INCLUDED) TO BE DETERMINED BY INSTALLATION SITE TO PROVIDE A SECURE CONNECTION

TOP PANEL MOUNTING ANGLE DETAIL (TYPICAL LEFT & RIGHT END)

BOTTOM OF BOARD

TOP PANEL MOUNTING ANGLE DETAIL (TYPICAL LEFT & RIGHT END)

TOP OF BOARD

MOUNTING HARDWARE (NOT INCLUDED) TO BE DETERMINED BY INSTALLATION SITE TO PROVIDE A SECURE CONNECTION

#8 X 1/2 HEX WASHER HEAD DRILL SCREWS (PROVIDED). SCREW THROUGH PANEL INTO MOUNTING ANGLE. TYPICAL LEFT & RIGHT ENDS.