Date: May 2016 Description: ARB Classic Canopy Application: Nissan Navara NP300 Dual Cab (Spain Built) Part No. & Barcode : See Table Page 3 Product Group: 125 - ARB HD Smooth Canopies 135 - ARB Canopies Availability Date: June 2016
Product Specification Product development of the ARB Classic canopy to suit the new Nissan Navara NP300 Euro-Spec 2015+ dual cab pick-up utilities has been finalised. Complementing the design flow of the vehicle and the high sided tub, the ARB canopy design is available as a standard height roof version in either Smooth or Textured exterior finish. Customers may choose from our side sliding window, lift up window or no side window configuration. Where side windows are optioned, they are positioned low on the canopy shell to maximise the access into the back of the vehicle. The canopy shell accommodates the protrusion of the vehicle’s 3rd safety lamp located on the top rear edge of the cabin. Due to the NP300 being slightly narrower in the vehicle cabin design, the front canopy window is offered only in sliding configuration to avoid interference with internal frames where fitted. The window has been designed to offer clear and unobstructed rear vision with the provision to easily clean the vehicle cabin rear glass.
Company Ident. No. 01745956
1-5
With the introduction of Nissan’s unique tailgate spoiler, ARB have designed a curved glass door manufactured from grey tinted and tempered safety glass to EC43R standards, which not only complements the spoiler with its contoured edging, it also includes the addition of a aluminium extrusion which mounts directly to the tailgate spoiler to assist with minimising water and dust ingress. Each rear door is fitted with a high mount LED stop lamp, a forward facing interior light and specially selected gas assist struts with low opening force (160N) suitable for a climate range of -30°C to 80°C. ARB’s unique laser cut steel mount system is bolted directly into fixed fasteners located at the front and rear of the vehicle tub which also integrate with ute liners (where fitted) with minimal modifications. ARB canopy shells are made from a special co-extruded ABS plastic for strength and durability. The ABS is inert and with suitable venting is safe for the transportation of animals. As a recyclable material we have the opportunity to reduce the amount of landfill at end of product life. The heavy duty painted smooth canopy blends with the smooth surface of the vehicle whilst the economical alternative is the white textured surface canopy with UV capping where painting is optional. Shell surface configurations are captured in our unique part numbers - Refer to Canopy part number table below For trade and lifestyle customers, we are thrilled to offer our standard side windows with the large 278mm opening to access the cargo area for a vast array of tools or camping equipment. Window combinations are captured in our unique part numbers - Refer to Canopy part number table below.
TAILGATE SEAL:
REAR GLASS:
To help prevent water and dust entry, an additional bracket with foam seal is fitted to both sides of the bed rail against the tailgate.
With the introduction of Nissan’s unique tailgate spoiler, ARB have designed a curved glass door manufactured from grey tinted and tempered safety glass to EC43R standards
Company Ident. No. 01745956
2-5
Part #
Shell style
Window Combination
CPS62A CPS62B CPS62C
Smooth Canopy Smooth Canopy Smooth Canopy
2 sliding side windows LH lift up, RH sliding 2 lift up windows
RH sliding, LH lift up No side windows 2 aluminium lift up windows 2 sliding side windows LH lift up, RH sliding 2 lift up windows RH sliding, LH lift up No side windows
CP62CA
Textured Canopy
2 aluminium lift up windows
Canopy is painted to vehicle manufacturer colour code. Specify at time of order
1
Installation For those familiar with ARB canopies, the Nissan Navara NP300 canopy is fitted in the same traditional way along with the inclusion of the tailgate spoiler door stop extrusion and corner tailgate seal assemblies. Installation time Fitment time allocation is 2.5 hours1. Fitting instructions are available via our trade resources website PN 3789364. Additional installation time required if sport bars and ute liners are fitted
1
Canopy Availability Our components will be in stock in June 2016 to enable canopies to be made to ORDER order. N.B. Due to the style of this vehicle, overall vehicle aesthetics and fitment of roof rack accessories, a high roof canopy has been excluded from the range.
Company Ident. No. 01745956
3-5
ACCESSORIES: A new internal frame kit has been made specifically to suit the Nissan Navara NP300 Dual Cab canopy. The ARB internal frame kit is rated to carry up to 100kg load evenly spread over the roof bar system (e.g. the roof cage and its contents must not exceed this rating). To accommodate for the OE fitted cabin roof rails found on ST-X models, specific roof rack mounts have been designed to suit. In addition, specific roof racks must be used when being fitted to these ST-X models. Accessory Description Canopy Vent Slimline Internal frame set for roof bars/rack
ARB Part Number
Standard or Option
4700010
Option
4138040
Option
Roof rack bracket kit (not ST-X)
4138004
Option
Roof rack mounts ST-X 4
4138014
Option
Canopy roof rack 1850 x 1250 ALLOY
4900140M
Option
Canopy roof rack 1850 x 1250 STEEL
4000020
Option
Canopy roof rack 1850 x 1120 ALLOY
4900130M
Option
Canopy roof rack 1850 x 1120 STEEL
4000010
Option
Canopy roof rack (ST-X) 1850x12502 STEEL
4000050
Option
Canopy roof rack (ST-X) 1850x12502 ALLOY
4000050M
Option
Roller for Steel Canopy roof rack
3700300
Option
Roof Bar Mount kit 3
4100320
Option
Fly Screen (suit sliding windows)
6600021L/R
Option
Screen - side window slider– full width
6600035
Option
Screen - side window slider– open section only
6600034
Option
Screen - front window lift up
6600037
Option
23
2
2
2
2
Components indicated with this reference are required to complete a full canopy roof rack installation. 3 Components indicated with this reference are required to complete a full roof bar installation. Roof bars will NOT align with roof bars fitted to OE roof rails. 4 Roof rack mount kit compatible with OE vehicle cabin roof rails 2
Caution: The canopy is NOT rated to carry loads directly on the roof top without an approved rack system. The rear door is recommended to remain in the closed position during transit.
Company Ident. No. 01745956
4-5
TECHNICAL SPECIFICATIONS: Fitting instructions and spare parts lists are available on www.sellarb.com.au.
D
B
A
C
Canopy Part Number
Roof
A (mm)
B (mm)
C (mm)
D (mm)
C/P/62x
Std
1570
1585
390
540
Stated dimensions are external canopy measurements in “mm”. Acceptable manufacturing variation to these nominal dimensions may occur. Dimension “C” is the internal measurement. With the door in the OPEN position the height from the bed rail is 420mm.
HEAD OFFICE
POSTAL ADDRESS
CONTACT DETAILS
ARB Europe s.r.o
Na Dlouhem c. 80, DC2, 251 01 Ricany - Jazlovice Czech Republic
