Product Information Guide Disc Mowers MFT02-104
TABLE OF CONTENTS MASSEY FERGUSON 1300 SERIES DISC MOWERS
FEATURES AND BENEFITS Introduction .......................................................................................................1 General .............................................................................................................2 Market ...............................................................................................................4 Cutterbar ...........................................................................................................5 Drives ................................................................................................................8 Mainframe .........................................................................................................9 Optional Kits....................................................................................................12
SPECIFICATIONS Model 1326 .....................................................................................................14 Model 1327 .....................................................................................................15 Model 1328 .....................................................................................................16 Model 1329 .....................................................................................................17 Model 1330 .....................................................................................................18
COMPETITIVE COMPARISONS Model 1326 .....................................................................................................19 Model 1327 .....................................................................................................20 Model 1328 .....................................................................................................23 Model 1329 .....................................................................................................26 Model 1330 .....................................................................................................29 Head to Head Comparisons............................................................................31
I
FEATURES AND BENEFITS MASSEY FERGUSON 1300 SERIES DISC MOWERS ®
INTRODUCTION Massey Ferguson® 1300 series disc mowers cut through tough, matted, tangled, and wet hay at high operating speeds. The efficient modular design with individually sealed and lubricated disc drive units helps eliminate catastrophic mower bed failure, and simplifies routine maintenance. Each module can use either grease or oil lubricants, each has a dipstick to check oil level and a breather to protect the seals. Knives are reversible, which doubles the knife life. The drive shaft is segmented, which speeds repairs. High speed, tough cutting Massey Ferguson rotary disc mowers are designed for working in adverse crop and field conditions with less chance of plugging.
1
FEATURES AND BENEFITS MASSEY FERGUSON 1300 SERIES DISC MOWERS ®
GENERAL Massey Ferguson® offers five sizes of disc mowers from 5’ 6” to 10’ 4” wide. The mowers attach to tractors with Category I or II three point hitch, and require a single acting remote valve, for lifting the mower into transport position. 1329 Transport MF 3pt Number oftnspt Discs
Model
Cutting Width
3126
5 foot 6 inch
4 Disc
1327
6 foot 8 inch
5 Disc
1328
7 foot 10 inch
6 Disc
1329
9 foot 2 inch
7 Disc
1330
10 foot 4 inch
8 Disc
1326 The Massey Ferguson® 1326 is a 4 disc, 5’ 6” (1.68 m) cutting width mower. A tractor with a minimum of 30 hp (22.4 kW) is required to operate the mower. The tractor needs to be equipped with an enclosed cab, to protect the operator. The mower attaches to the tractor with a Category I or II three-point hitch, and requires a single acting remote valve, for lifting the mower into transport position.
4 Disc
1327 The Massey Ferguson® 1327 is a 5 disc, 6’ 8” (2.0 m) cutting width mower. A tractor with a minimum of 35 hp (26 kW) is required to operate the mower. The tractor needs to be equipped with an enclosed cab, to protect the operator. The mower attaches to the tractor with a Category I or II three-point hitch, and requires a single acting remote valve, for lifting the mower into transport position. 2
5 Disc
FEATURES AND BENEFITS MASSEY FERGUSON 1300 SERIES DISC MOWERS ®
1328 The 1328 is a 6 disc, 7’ 10” (2.39 m) cutting width mower. A tractor with a minimum of 40 hp (29.8 kW) is required to operate the mower. The tractor needs to be equipped with an enclosed cab, to protect the operator. The mower attaches to the tractor with a Category II three-point hitch, and requires a single acting remote valve, for lifting the mower into transport position.
6 Disc
1329 The 1329 is a 7 disc, 9’ 2” (2.79 m) cutting width mower. A tractor with a minimum of 45 hp (34 kW) is required to operate the mower. The tractor needs to be equipped with an enclosed cab, to protect the operator. The mower attaches to the tractor with a Category II three-point hitch, and requires a single acting remote valve, for lifting the mower into transport position.
7 Disc
1330 The 1330 is a 8 disc, 10’ 4” (3.15 m) cutting width mower. A tractor with a minimum of 50 hp (37.3 kW) is required to operate the mower. The tractor needs to be equipped with an enclosed cab, to protect the operator. The mower attaches to the tractor with a Category II three-point hitch, and requires a single acting remote valve, for lifting the mower into transport position.
3
8 Disc
FEATURES AND BENEFITS MASSEY FERGUSON 1300 SERIES DISC MOWERS ®
MARKET The 1300 Series mowers meet the needs of a wide range of customers. There is a size to meet the needs of the small farmer, all the way to the custom operator. The mowers can be used to mow pasture and set–aside ground, as well as the all types of hay crops. The low power requirements allow customers with smaller tractors (equipped with enclosed cab) the opportunity to upgrade to a disc mower.
1328
4
FEATURES AND BENEFITS MASSEY FERGUSON 1300 SERIES DISC MOWERS ®
CUTTERBAR Easy Cutterbar access Lifting the front curtain easily accesses the mower cutterbar. Changing knives and periodic maintenance can be quickly performed. The curtain can then just as easily be returned to the working position Cutterbar Access
Modular Cutterbar Design The cutterbar is designed so that if one cutting module is damaged internally, it will not contaminate the other modules. The modular cutterbar design allows for replacement of the module rather than disassembling the entire cutterbar, for ease of maintenance and service.
Modular Cutterbar
Cutterbar Skid Shoes Each cutterbar module rides across the ground on a replaceable skid shoe. The 6” wide shoes protect the main components of the cutterbar from wearing do to contact with abrasive soil, and they are also wide enough to distribute the weight of the mower over the ground to prevent streaking while allowing the mower to follow the contour of the land. Skid Shoes
5
FEATURES AND BENEFITS MASSEY FERGUSON 1300 SERIES DISC MOWERS ®
Segmented Drive Shaft The Massey Ferguson® modular cutterbar system is driven by a segmented hex shaft and pinion gears. The hex drive shaft is segmented, to allow for quick disassembly of the modules for servicing. The shaft is a small diameter, to keep the bed profile low. A low cutterbar profile helps keep the bed level when cutting, which reduces “scalped” cutting and streaking.
Seg-shaft
The vertical shaft in the disc hub is designed with a shear point. This shear point creates a safe location for the cutterbar to give if a solid obstruction is encountered. Having the shaft shear protects the more expensive internal components of the disc module.
Module
6
FEATURES AND BENEFITS MASSEY FERGUSON 1300 SERIES DISC MOWERS ®
Sealed Modules Inside the sealed modules are bevel drive gears and sealed bearings. Each module has a breather and a dipstick/fill hole to monitor oil level. This design allows the module to use either EPO grease or oil as the lubricant. From the factory the mowers come filled with grease. The cutterbar's reversible, hex driveshafts provide longer life and reduced operating cost. Each cutterbar module consists of two main pieces, the sealed gearbox housing, and the oval disc that retains the knives
Expanded Module View
Hillside Mowing Because each drive unit is sealed with it’s own supply of lubrication, the mower can operate at any angle (up to 90 degrees), for long periods of time. The lubrication stays within each module, and doesn’t run to one end of the bed.
Hillside Mowing
Knives The standard knife has a 12 degree pitch. For tough conditions such as down crop, an 18 degree knife is available. The 18 degree knives gives more lift to help pick up the crop for a cleaner cut. This optional 18 degree knife takes a little more horsepower to operate and is more likely to wear quickly in abusive conditions.
Knives
7
FEATURES AND BENEFITS MASSEY FERGUSON 1300 SERIES DISC MOWERS ®
DRIVES PTO Shaft All units are equipped with a 6-spline, 540rpm PTO shaft with an overrunning clutch. The overrunning clutch is designed to prevent damage to the cutterbar, PTO shaft, and tractor PTO clutch when the machine is being shut down. It allows the cutterbar to coast to a stop when the PTO is turned off. PTO
Drive Belts The cutterbar main drive gearbox is driven from the PTO shaft by belts. The 1326 and 1327 have 3 matched “HB” Section belts, the 1328 has 4 matched “HB” Section belts, and the 1329 and 1330 have a 4-groove banded belt to drive the machine. The belts help to reduce the shock load to the gearbox. The belts can easily be maintained without removing the belt guard. (Shield shown removed to view belts)
Drive Belts
Main Drive Gearbox The heavy-duty main drive gearbox has two separate oil reservoirs. Both are separate from the cutterbar modules. The gearbox contains 90W gear oil.
Gearbox
8
FEATURES AND BENEFITS MASSEY FERGUSON 1300 SERIES DISC MOWERS ®
MAINFRAME Hitch All models use a heavy-duty, one-piece box beam hitch design capable of attaching to a quick hitch. The larger models, 1328, 1329 and 1330, use a wide beam design to accommodate larger tractors and wider wheel spacing. The 1326 and 1327 offer an optional offset hitch for larger tractors with wide wheel spacing. The 1326 and 1327 offer a Category 1 & 2 three-point hitch or quick hitch to fit the smaller model tractors, as well as the larger ones. The 1328, 1329 and 1330 are designed for the larger model tractors, and offer a category 2 three-point hitch or quick hitch.
Frame
Inner Flotation Spring The inner flotation spring is standard on all models. It is set at the factory and is nonadjustable. It takes pressure off the inner skid shoe to increase wear life.
Flotation Springs
Outer Flotation Spring Massey Ferguson offers an outer flotation spring as standard equipment for the models 1328, 1329 and 1330. This reduces the wear on the outer skid shoe giving it a longer wear life. Outer flotation springs can be obtained through parts for the 1326 and 1327. Outer Spring
9
FEATURES AND BENEFITS MASSEY FERGUSON 1300 SERIES DISC MOWERS ®
Hydraulic Lift Cylinder The hydraulic lift cylinder is standard on all models and is used to raise and lower the cutterbar for transport and storage. The Massey Ferguson® 1300 series use a single acting hydraulic cylinder so they can be used on tractors with single acting or double acting remote valves.
Hydraulic Lift Cylinder
Transport Lock The 1300 series feature a pin and latch system to lock the cutterbed into transport position. The latch is rope activated so it is possible for the operator to unlock the machine from road position without having to leave the tractor cab. Cutterbar Breakaway Lockout Valve
The cutterbar breakaway is designed to prevent damage if the cutterbar hits an object. It gives the operator time to stop before serious damage is done. The spring tension is adjustable and if it is tripped, the operator simply backs the tractor up (leaving the mower on the ground) to reset the breakaway.
Breakaway Normal
10
Breakaway Extended
FEATURES AND BENEFITS MASSEY FERGUSON 1300 SERIES DISC MOWERS ®
Heavy Duty Curtain All the 1300 series disc mowers offer a heavy curtain as well as a reinforced curtain frame. This curtain helps to contain material and reduces the possibility of objects being thrown out.
Curtain
Reinforced Curtain Frame The Massey Ferguson 1300 series disc mowers all have a reinforced curtain frame. The frame provides a sturdy curtain mount for reliability while allowing easy access to the cutterbar. (The curtain has been removed to view the frame.)
Curtain Frame
Curtain Down
Curtain Raised
11
FEATURES AND BENEFITS MASSEY FERGUSON 1300 SERIES DISC MOWERS ®
OPTIONAL KITS (Field Installed) Swathboard The Swathboard guides the cut crop away from the uncut crop. This separates the cut and uncut crop, making it easier to mow without driving the tractor tires over cut hay or dragging the cut hay with the drive end of the mower on the next pass. Wholegoods Kit – MKD1015 Estimated Installation Time – 0.5 Hr. Swathboard
Tall Crop Divider The optional tall crop divider attaches to the outer end of the disc mower and is used to separate tall material. The tall crop divider provides a clean division between the standing crop and crop being cut. It improves the cutting performance in tall, tangled crops. Wholegoods Kit – MKD1016 Tall Crop Divider
Estimated Installation Time – 0.5 Hr. 2” Topping Skids (Set of Four) The 2” (51 mm) high skid shoes provides additional cutting height for longer stubble. The high skid shoe is also recommended in rocky conditions, to protect the cutterbar. (1) Regular Skid. (2) Topping Skid Wholegoods Kit – MK11177 Estimated Installation Time – 1.0 Hr.
Topping Skids
12
FEATURES AND BENEFITS MASSEY FERGUSON 1300 SERIES DISC MOWERS ®
Offset Hitch Bundle for 1326 and 1327 The offset hitch moves the mower (1326 and 1327 only) over 12” (305 mm), to allow the use of larger tires or wider wheel spacing. The offset hitch allows the operator to use the full width of the cutterbar, and prevent the rear wheel from running over the uncut crop. Wholegoods Kit – MKD1017 Estimated Installation Time – 1.0 Hr.
Offset Hitch
Offset Hitch
13
SPECIFICATIONS 1326 DISC MOWER MODEL ............................................................................................ 1326 - 5 ft 6 in Disc Mower DIMENSIONS & WEIGHT Weight lb (kg) ...................................................................................................... 1100 (499.4)
CUTTERBED Cutting Width ft (m) .................................................................................................. 5.5 (1.68) Number of Discs.....................................................................................................................4 Number of Knives................................................................................................8 (2 per disc) Knife Lift, Standard Degrees ................................................................................................12 Knife Lift, Optional Degrees .................................................................................................18 Knife Circle Diameter IN (mm)................................................................................. 19.7 (500) Recommended Cutting Angle Degrees ...........................................................................0 to 6 Disc Speed rpm................................................................................................................3000 Tip Speed mph (km/hr).......................................................................................... 175.8 (289) Knives .................................................................................................Swingaway, Reversible Cutterbed Design ....................................................................................Horizontal Hex Shaft Modular Gear Components Flotation ...................................................................... Non-Adjustable Enclosed Float Spring
FRAME Protection .......................................................................................Spring Loaded Breakaway Heat Treated Skid Shoes .......................................................................................................4 Hydraulic Lift.............................................................................................................. Standard
DRIVE SYSTEM PTO Speed rpm .................................................................................................................540 Drive Line .....................................................................................................Constant Velocity Drive Protection.........................................................................................Overrunning Clutch Gearcase Drive ..................................................................................... 3V “HB” Section Belts
TRACTOR REQUIREMENTS Recommended Horsepower hp (kW) ........................................................................... 30 (22) Tractor Type .................................................................................................. Equipped w/Cab Hitch ..............................................................................................Category I or II Three Point Hydraulics ................................................................................... Single Acting Remote Valve Cutting Speed mph (km/hr) ................................................................................Up to 10 (7.5)
FIELD INSTALLED OPTIONS High Clearance Skid Shoes Offset Hitch Crop Divider (Specifications and design are subject to change without notice and without liability therefore.) Product Sales Training, June 2006
14
SPECIFICATIONS 1327 DISC MOWER MODEL ........................................................................................... 1327 - 6 ft 8 in Disc Mower DIMENSIONS & WEIGHT Weight lb (kg) ...................................................................................................... 1165 (528.8)
CUTTERBED Cutting Width ft (m) .................................................................................................. 6.7 (2.03) Number of Discs.....................................................................................................................5 Number of Knives..............................................................................................10 (2 per disc) Knife Lift, Standard Degrees ................................................................................................12 Knife Lift, Optional Degrees .................................................................................................18 Knife Circle Diameter IN (mm).................................................................................. 19.7(500) Recommended Cutting Angle Degrees ...........................................................................0 to 6 Disc Speed rpm................................................................................................................3000 Tip Speed mph (km/hr).......................................................................................... 175.8 (289) Knives .................................................................................................Swingaway, Reversible Cutterbed Design ....................................................................................Horizontal Hex Shaft Modular Gear Components Flotation ...................................................................... Non-Adjustable Enclosed Float Spring
FRAME Protection .......................................................................................Spring Loaded Breakaway Heat Treated Skid Shoes .......................................................................................................5 Hydraulic Lift.............................................................................................................. Standard
DRIVE SYSTEM PTO Speed rpm .................................................................................................................540 Drive Line .....................................................................................................Constant Velocity Drive Protection.........................................................................................Overrunning Clutch Gearcase Drive ..................................................................................... 3V “HB” Section Belts
TRACTOR REQUIREMENTS Recommended Horsepower hp (kW) ........................................................................... 35 (26) Tractor Type .................................................................................................. Equipped w/Cab Hitch ..............................................................................................Category I or II Three Point Hydraulics ................................................................................... Single Acting Remote Valve Cutting Speed mph (km/hr) ................................................................................Up to 10 (7.5)
FIELD INSTALLED OPTIONS High Clearance Skid Shoes Offset Hitch Crop Divider (Specifications and design are subject to change without notice and without liability therefore.) Product Sales Training, June 2006
15
SPECIFICATIONS 1328 DISC MOWER MODEL ......................................................................................... 1328 - 7 ft 10 in Disc Mower DIMENSIONS & WEIGHT Weight lb (kg) ......................................................................................................... 1120 (508)
CUTTERBED Cutting Width ft (m) .................................................................................................. 7.8 (2.38) Number of Discs.....................................................................................................................6 Number of Knives..............................................................................................12 (2 per disc) Knife Lift, Standard Degrees ................................................................................................12 Knife Lift, Optional Degrees .................................................................................................18 Knife Circle Diameter IN (mm).................................................................................. 19.7(500) Recommended Cutting Angle Degrees ...........................................................................0 to 6 Disc Speed rpm................................................................................................................3000 Tip Speed mph (km/hr).......................................................................................... 175.8 (289) Knives .................................................................................................Swingaway, Reversible Cutterbed Design ....................................................................................Horizontal Hex Shaft Modular Gear Components Flotation, Inner ............................................................ Non-Adjustable Enclosed Float Spring Flotation, Outer....................................................................................Adjustable Float Spring
FRAME Protection .......................................................................................Spring Loaded Breakaway Heat Treated Skid Shoes .......................................................................................................6 Hydraulic Lift.............................................................................................................. Standard
DRIVE SYSTEM PTO Speed rpm .................................................................................................................540 Drive Line .....................................................................................................Constant Velocity Drive Protection.........................................................................................Overrunning Clutch Gearcase Drive ........................................................................................4V “B” Section Belts
TRACTOR REQUIREMENTS Recommended Horsepower hp (kW) ........................................................................... 40 (30) Tractor Type .................................................................................................. Equipped w/Cab Hitch ....................................................................................................Category II Three Point Hydraulics ................................................................................... Single Acting Remote Valve Cutting Speed mph (km/hr) ................................................................................Up to 10 (7.5)
FIELD INSTALLED OPTIONS High Clearance Skid Shoes Offset Hitch Crop Divider (Specifications and design are subject to change without notice and without liability therefore.) Product Sales Training, June 2006
16
SPECIFICATIONS 1329 DISC MOWER MODEL ........................................................................................... 1329 - 9 ft 2 in Disc Mower DIMENSIONS & WEIGHT Weight lb (kg) ......................................................................................................... 1235 (560)
CUTTERBED Cutting Width in (mm)............................................................................................. 110 (2794) Number of Discs.....................................................................................................................7 Number of Knives..............................................................................................14 (2 per disc) Knife Lift, Standard Degrees ................................................................................................12 Knife Lift, Optional Degrees .................................................................................................18 Knife Circle Diameter in (mm) ................................................................................. 19.7 (500) Recommended Cutting Angle Degrees ...........................................................................0 to 6 Disc Speed rpm................................................................................................................3000 Tip Speed mph (km/hr).......................................................................................... 175.8 (289) Knives .................................................................................................Swingaway, Reversible Cutterbed Design ....................................................................................Horizontal Hex Shaft Modular Gear Components Flotation, Inner ............................................................ Non-Adjustable Enclosed Float Spring Flotation, Outer....................................................................................Adjustable Float Spring
FRAME Protection .......................................................................................Spring Loaded Breakaway Heat Treated Skid Shoes .......................................................................................................7 Hydraulic Lift.............................................................................................................. Standard
DRIVE SYSTEM PTO Speed rpm .................................................................................................................540 Drive Line .....................................................................................................Constant Velocity Drive Protection.........................................................................................Overrunning Clutch Gearcase Drive ........................................................................................4V “B” Section Belts
TRACTOR REQUIREMENTS Recommended Horsepower hp (kW) ........................................................................... 45 (34) Tractor Type .................................................................................................. Equipped w/Cab Hitch ....................................................................................................Category II Three Point Hydraulics ................................................................................... Single Acting Remote Valve Cutting Speed mph (km/hr) ................................................................................Up to 10 (7.5)
FIELD INSTALLED OPTIONS High Clearance Skid Shoes Offset Hitch Crop Divider (Specifications and design are subject to change without notice and without liability therefore.) Product Sales Training, June 2006
17
SPECIFICATIONS 1330 DISC MOWER MODEL ......................................................................................... 1330 - 10 ft 4 in Disc Mower DIMENSIONS & WEIGHT Weight lb (kg) ......................................................................................................... 1510 (685)
CUTTERBED Cutting Width in (mm)............................................................................................. 124 (3150) Number of Discs.....................................................................................................................8 Number of Knives..............................................................................................16 (2 per disc) Knife Lift, Standard Degrees ................................................................................................12 Knife Lift, Optional Degrees .................................................................................................18 Knife Circle Diameter in (mm) ................................................................................. 19.7 (500) Recommended Cutting Angle Degrees ...........................................................................0 to 6 Disc Speed rpm................................................................................................................3000 Tip Speed mph (km/hr).......................................................................................... 175.8 (289) Knives .................................................................................................Swingaway, Reversible Cutterbed Design ....................................................................................Horizontal Hex Shaft Modular Gear Components Flotation, Inner ............................................................ Non-Adjustable Enclosed Float Spring Flotation, Outer....................................................................................Adjustable Float Spring
FRAME Protection .......................................................................................Spring Loaded Breakaway Heat Treated Skid Shoes .......................................................................................................8 Hydraulic Lift.............................................................................................................. Standard
DRIVE SYSTEM PTO Speed rpm .................................................................................................................540 Drive Line .....................................................................................................Constant Velocity Drive Protection.........................................................................................Overrunning Clutch Gearcase Drive ..................................................................................... 4V “HB” Section Belts
TRACTOR REQUIREMENTS Recommended Horsepower hp (kW) ........................................................................... 50 (37) Tractor Type .................................................................................................. Equipped w/Cab Hitch ....................................................................................................Category II Three Point Hydraulics ................................................................................... Single Acting Remote Valve Cutting Speed mph (km/hr) ................................................................................Up to 10 (7.5)
FIELD INSTALLED OPTIONS High Clearance Skid Shoes Swathboard Crop Divider (Specifications and design are subject to change without notice and without liability therefore.) Product Sales Training, June 2006
18
COMPETITIVE COMPARISONS MODEL 1326 DISC MOWER MAKE MODEL TRACTOR REQUIREMENTS PTO HP, Minimum hp (kW) PTO Speed RPM Three Point Hitch Category MOWER CAPACITY Cutting Width ft (m) Cutting Angle Cutting Speed.mph (kph) CUTTERBAR Style Drive System Lubrication Breakaway Flotation Lift Cylinder Transport Lock CUTTING DISCS Number of Discs Number of Knives per Disc Disc Speed RPM Knife Tip Speed mph (kph) DRIVES Input to Gearcase Protection WEIGHTS AND DIMENSIONS Transport Width in (mm) Weight lb (kg) OPTIONS Topping Skids Swathboard Inner Crop Divider Tall Crop Divider Offset Hitch Other
MASSEY FERGUSON 1326
JOHN DEERE
KUHN
VICON
240
GMD 400
CM 1700
30.0 (22.4) 540 Category I or II
35 (26.1) 540 Category I or II
28 (21) 540 Category I or II
36(26) 540 Category I or II
5.5 (1.68) -25° to +90° 10.0 (16.1)
5.3 (1.60) -20° to +20° INA
5.3 (1.60) INA INA
5.5 (1.68) -45° to +90° INA
Individual Disc Drive Oil-Bath Gear Cutterbed Oil-Bath Gear Cutterbed Oil-Bath Gear Cutterbed Modular Components Hex Driveshaft Intermeshing Gears Intermeshing Gears Intermeshing Gears Grease Oil Oil Oil Spring Loaded Spring Loaded Spring Loaded Spring Loaded Non-Adjustable Non-Adjustable Non-Adjustable Non-Adjustable Hydraulic Mechanical Hydraulic Mechanical Single-Acting N/A Single-Acting N/A Mechanical Mechanical Mechanical Mechanical 4 2 3000 176 (283)
4 2 3030 INA
4 2 INA INA
4 3 2800 INA
3 HB V-Belt Overrunning Clutch
V-Belt N/A
V-Belt Optional
Multi V-Belt Optional
INA 1100 (499.4)
10 (254) plus Tractor 759 (344)
INA 834 (379)
INA 910 (415)
Yes Yes Yes Yes Yes - 12.0 (305) HD Flotation Spring Kit
Yes Standard N/A N/A N/A Hydraulic Lift
Yes Wheel N/A N/A Yes Overrunning Clutch
Yes Standard Yes N/A N/A Hydraulic Lift
Every attempt has been made to insure accuracy, but MASSEY FERGUSON assumes no responsibility for authenticity of data. Data presented is obtained from various sources, including manufacturers publications. Product Training – August, 2006
19
COMPETITIVE COMPARISONS MODEL 1327 DISC MOWER MAKE MODEL TRACTOR REQUIREMENTS PTO HP, Minimum hp (kW) PTO Speed RPM Three Point Hitch Category MOWER CAPACITY Cutting Width ft (m) Cutting Angle Cutting Speed.mph (kph) Cutting Capacity A/h (ha/h) CUTTERBAR Style Drive System Lubrication Breakaway Flotation Lift Cylinder Transport Lock CUTTING DISCS Number of Discs Number of Knives per Disc Disc Speed RPM Knife Tip Speed mph (kph) DRIVES Input to Gearcase Protection WEIGHTS AND DIMENSIONS Transport Width in (mm) Weight lb (kg) OPTIONS Topping Skids Swathboard Inner Crop Divider Tall Crop Divider Offset Hitch in (mm) Other
MASSEY FERGUSON 1327
NEW HOLLAND
KUHN
KUHN
615
GMD 55
GMD 500
35.0 (26.1) 540 Category I or II
45(33.5) 540 Category I
40.0 (30) 540 Category I or II
35.0 (25) 540 Category I or II
6.7 (2.03) -25° to +90° 10.0 (16.1) 8 (3.23)
6.7 (2.03) -30° to +30° INA INA
6.6 (2.0) -40° to +45° 6.25 (10) 5.0 (2.0)
6.6 (2.01) INA 7.5 (12) 6.0 (2.5)
Individual Disc Drive Modular Components Hex Driveshaft Grease Spring Loaded Single Spring Hydraulic Single-Acting Mechanical
Individual Disc Drive Oil-Bath Gear Cutterbed Oil-Bath Gear Cutterbed Modular Components Splined Round Intermeshing Gears Intermeshing Gears Driveshaft Oil Oil Oil Spring Loaded Spring Loaded Spring Loaded Single Spring Single Spring Single Spring Hydraulic Hydraulic Hydraulic Single-Acting Single-Acting Single-Acting Mechanical Remote Mechanical Mechanical
5 2 3000 176 (283)
5 2 3000 176 (283)
5 2 INA INA
5 2 INA INA
3 HB V-Belt Overrunning Clutch
4 V-Belts Overrunning Clutch
Multi V-Belt Optional
Multi V-Belt Optional
INA
INA
INA
1165 (528.8)
1275 (580)
Tractor Width +10.0 (254) 893 (405)
941 (427)
Yes Yes Yes Yes Yes - 12.0 (305) HD Flotation Spring Kit (Parts)
Yes Standard Yes N/A N/A
Yes Standard Yes N/A Yes - 6.0 (152) Extended Swathboard
N/A Standard N/A N/A N/A Overrunning Clutch
Every attempt has been made to insure accuracy, but MASSEY FERGUSON assumes no responsibility for authenticity of data. Data presented is obtained from various sources, including manufacturers publications. Product Training, August 2006
20
COMPETITIVE COMPARISONS MODEL 1327 DISC MOWER MAKE MODEL TRACTOR REQUIREMENTS PTO HP, Minimum hp (kW) PTO Speed RPM Three Point Hitch Category MOWER CAPACITY Cutting Width ft (m) Cutting Angle Cutting Speed.mph (kph) Cutting Capacity A/h (ha/h) CUTTERBAR Style Drive System Lubrication Breakaway Flotation Lift Cylinder Transport Lock CUTTING DISCS Number of Discs Number of Knives per Disc Disc Speed RPM Knife Tip Speed mph (kph) DRIVES Input to Gearcase Protection WEIGHTS AND DIMENSIONS Transport Width in (mm) Weight lb (kg) OPTIONS Topping Skids Swathboard Inner Crop Divider Tall Crop Divider Offset Hitch in (mm) Other
MASSEY FERGUSON 1327
VICON
KRONE
BUSH HOG
CM 2200
AM 203
HM2007
35.0 (26.1) 540 Category I or II
42 (30) 540 Category I or II
37 (27) 540 Category I or II
40 (30) 540 Category I or II
6.7 (2.03) -25° to +90° 10.0 (16.1) 8 (3.23)
7.17 (2.15) -45° to +90° 9.4 (15.0) 8.17 (3.3)
6.5 (2) INA 6.2 (10) 4.9 (2)
6.6 (2) INA 6.25 7.0 (2.8)
Individual Disc Drive Oil-Bath Gear Cutterbed Oil-Bath Gear Cutterbed Modular Disc Drive & Modular Components Spacer Components Hex Driveshaft Intermeshing Gears Intermeshing Gear Hex Driveshaft Grease Oil Oil Grease Spring Loaded Spring Loaded Spring Loaded Spring Loaded Non-Adjustable Non-Adjustable Non-Adjustable Non-Adjustble Hydraulic Hydraulic Hydraulic Hydraulic Single-Acting Single-Acting Single-Acting Single-Acting Hydraulic Mechanical INA INA 5 2 3000 176 (283)
5 3 2800 168 (270)
5 2 3100 INA
5 2 3000 185 (298)
3 HB V-Belt Overrunning Clutch
Multi V-Belt N/A
Multi V-Belt INA
4 V-Belt Overrunning Clutch
INA 1165 (528.8)
INA 1050 (480)
INA 816 (370)
66.0 (1676) 915 (415)
Yes Yes Yes Yes Yes - 12.0 (305) HD Flotation Spring Kit
N/A Yes Yes N/A N/A
INA Standard INA INA INA
INA Standard INA INA INA Overrunning Clutch
Every attempt has been made to insure accuracy, but Massey Ferguson assumes no responsibility for authenticity of data. Data presented is obtained from various sources, including manufacturers publications. Product Training – August 2006
21
COMPETITIVE COMPARISONS MODEL 1327 DISC MOWER MAKE MODEL TRACTOR REQUIREMENTS PTO HP, Minimum hp (kW)
PTO Speed RPM Three Point Hitch Category MOWER CAPACITY Cutting Width ft (m) Cutting Angle Cutting Speed.mph (kph) Cutting Capacity A/h (ha/h) CUTTERBAR Style Drive System Lubrication Breakaway Flotation Lift Cylinder Transport Lock CUTTING DISCS Number of Discs Number of Knives per Disc Disc Speed RPM Knife Tip Speed mph (kph) DRIVES Input to Gearcase Protection WEIGHTS AND DIMENSIONS Transport Width in (mm) Weight lb (kg) OPTIONS Topping Skids Swathboard Inner Crop Divider Tall Crop Divider Offset Hitch in (mm) Other
MASSEY FERGUSON 1327
VERMEER 5030
35.0 (26.1) 540 Category I or II
45 (34) 540 Category II
6.7 (2.03) -25° to +90° 10.0 (16.1) 8 (3.23)
6.75(2.05) INA 9 (14.5) 7.36 (2.98)
Individual Disc Drive Modular Components Hex Driveshaft Grease Spring Loaded Non-Adjustable Hydraulic Single-Acting Hydraulic
Individual Disc Drive Modular Components Hex Driveshaft Oil Spring Loaded Non-Adjustable Hydraulic Single-Acting Mechanical
5 2 3000 176 (283)
5 2 2850 168 (270)
3 HB V-Belt Overrunning Clutch
Multi V-Belt N/A
INA 1165 (528.8)
INA 1135 (515)
Yes Yes Yes Yes Yes - 12.0 (305) HD Flotation Spring Kit
Yes Standard Yes N/A N/A
Every attempt has been made to insure accuracy, but Massey Ferguson assumes no responsibility for authenticity of data. Data presented is obtained from various sources, including manufacturers publications. Product Training – August 2006
22
COMPETITIVE COMPARISONS MODEL 1328 DISC MOWER MAKE MODEL TRACTOR REQUIREMENTS PTO HP, Minimum hp (kW) PTO Speed RPM Three Point Hitch Category MOWER CAPACITY Cutting Width ft (m) Cutting Angle Cutting Speed.mph (kph) Cutting Capacity A/h (ha/h) CUTTERBAR Style Drive System Lubrication Breakaway Flotation Lift Cylinder Transport Lock CUTTING DISCS Number of Discs Number of Knives per Disc Disc Speed RPM Knife Tip Speed mph (kph) DRIVES Input to Gearcase Protection WEIGHTS AND DIMENSIONS Transport Width in (mm) Weight lb (kg) OPTIONS Topping Skids Swathboard Inner Crop Divider Tall Crop Divider Other
MASSEY FERGUSON 1328
NEW HOLLAND
40.0 (29.8) 540 Category I or II
55.0 (41) 540 Category II
42.0 (30) 540 Category I or II
41 (30) 540 Category I or II
7.8 (2.4) -25° to +90° 10.0 (16.1) 9.45 (3.8)
7.8 (2.4) -30° to +18° INA INA
7.8 (2.4) -35° to +35° 8.0 (12.8) 7.56 (3.06)
7.8 (2.4) INA 6.56 6.2 (2.5)
Individual Disc Drive Modular Components Hex Driveshaft Grease Spring Loaded Adjustable Hydraulic Single-Acting Mechanical
462
JOHN DEERE 265
KRONE AM 243
Individual Disc Drive Oil-Bath Gear Cutterbed Oil-Bath Gear Cutterbed Modular Components Hex Driveshaft Intermeshing Gear Intermeshing Gear Oil Oil Oil Spring Loaded Spring Loaded Spring Loaded Non-Adjustable Non-Adjustable Non-Adjustable Hydraulic Hydraulic Hydraulic Single-Acting Single-Acting Single-Acting INA INA INA
6 2 3000 176 (283)
6 2 3000 176 (183)
6 2 2986 INA
6 2 3100 INA
4 HB V-Belts Overrunning Clutch
4 V-Belts Overrunning Clutch
Multi V-Belt Optional
Multi V-Belt INA
INA 1340 (608)
INA 1405 (639)
Tractor Width +9 (229) 953 (433)
INA 860 (390)
Yes Yes Yes Yes
Yes Standard N/A N/A
Yes Standard N/A N/A HD Driveline w/Overrunning Clutch
INA Standard INA INA
Every attempt has been made to insure accuracy, but MASSEY FERGUSON assumes no responsibility for authenticity of data. Data presented is obtained from various sources, including manufacturers publications. Product Training, August 2006
23
COMPETITIVE COMPARISONS MODEL 1328 DISC MOWER MAKE MODEL TRACTOR REQUIREMENTS PTO HP, Minimum hp (kW) PTO Speed RPM Three Point Hitch Category MOWER CAPACITY Cutting Width ft (m) Cutting Angle Cutting Speed.mph (kph) Cutting Capacity aph (haph) CUTTERBAR Style Drive System Lubrication Breakaway Flotation Lift Cylinder Transport Lock CUTTING DISCS Number of Discs Number of Knives per Disc Disc Speed RPM Knife Tip Speed mph (kph) DRIVES Input to Gearcase Protection WEIGHTS AND DIMENSIONS Transport Widthin (mm) Weight lb (kg) OPTIONS Topping Skids Swathboard Inner Crop Divider Tall Crop Divider Other
MASSEY FERGUSON 1328
KUHN
KUHN
VICON
GMD 66
GMD 600
CM 2400
40.0 (29.8) 540 Category I or II
45.0 (33.6) 540 Category I or II
42.0 (31.0) 540 Category II
46.0 (33) 540 Category I or II
7.8 (2.4) -25° to +90° 10.0 (16.1) 9.45 (3.8)
7.8 (2.4) -40° to +45° 6.35 (10.2) 6.0 (2.5)
7.8 (2.4) INA 7.9 (11.2) 7.5 (3.0)
7.9 (2.40) -45° to +90° INA INA
Individual Disc Drive Oil-Bath Gear Cutterbed Oil-Bath Gear Cutterbed Oil-Bath Gear Cutterbed Modular Components Hex Driveshaft Intermeshing Gears Intermeshing Gears Intermeshing Gears Grease Oil Oil Oil Spring Loaded Spring Loaded Spring Loaded Spring Loaded Adjustable Non-Adjustable Adjustable Non-Adjustable Hydraulic Hydraulic Hydraulic Hydraulic Single-Acting Single-Acting Single-Acting Single-Acting Hydraulic Mechanical Remote Mechanical Mechanical 6 2 3000 176 (283)
6 2 INA INA
6 2 INA INA
6 3 2800 168 (270)
4 HB V-Belt Overrunning Clutch
Multi V-Belt Optional
Multi V-Belt Overrunning Clutch
Multi V-Belt Optional
INA
Tractor Width +10.0 (254) 948 (430)
INA
INA
1177 (535)
1090 (495)
Yes Standard Yes N/A Offset Hitch, Quick Hitch Adapter
Yes Yes Yes Yes
1340 (608) Yes Yes Yes Yes
N/A Standard Yes N/A Overrunning Clutch, Inner Swathboard, Offset Hitch, Extended Outer Swathboard
Every attempt has been made to insure accuracy, but MASSEY FERGUSON assumes no responsibility for authenticity of data. Data presented is obtained from various sources, including manufacturers publications. Product Training, August 2006
24
COMPETITIVE COMPARISONS MODEL 1328 DISC MOWER MAKE MODEL TRACTOR REQUIREMENTS PTO HP, Minimum hp (kW) PTO Speed RPM Three Point Hitch Category MOWER CAPACITY Cutting Width ft (m) Cutting Angle Cutting Speed.mph (kph) Cutting Capacity aph (haph) CUTTERBAR Style Drive System Lubrication Breakaway Flotation Lift Cylinder Transport Lock CUTTING DISCS Number of Discs Number of Knives per Disc Disc Speed RPM Knife Tip Speed mph (kph) DRIVES Input to Gearcase Protection WEIGHTS AND DIMENSIONS Transport Width in (mm) Weight lb (kg) OPTIONS Topping Skids Swathboard Inner Crop Divider Tall Crop Divider Other
MASSEY FERGUSON 1328
VERMEER
LELY SPLENDIMO
BUSH HOG
6030
240T
HM2008
40 (29.8) 540 Category I or II
60 (42) 540 Category II
40 (30.0) 540 Category II
45.0 (33.5) 540 Category I or II
7.8 (2.4) -25° to +90° 10.0 (16.1) 9.45 (3.8)
7.8 (2.4) INA 9.0 (14.5) 8.6 (3.5)
7.9 (2.40) -30° to +30° INA INA
7.9 (2.4) INA 6.27 (10.0) 6.0 (2.5)
Individual Disc Drive Modular Components Hex Driveshaft Grease Spring Loaded Single Spring Hydraulic Single-Acting Hydraulic
Individual Disc Drive Modular Components Hex Driveshaft
Individual Disc Drive Modular Components Driveshaft INA Spring-Loaded Non-Adjustable Hydraulic Single-Acting Mechanical
Oil-Bath Gear Cutterbed Intermeshing Gears Oil Spring Loaded Non-Adjustble Hydraulic Single-Acting Hydraulic
6 2 3000 176 (283)
6 2 2850
6 2 INA INA
6 2 3000 185 (298)
4 HB V-Belt Overrunning Clutch
Multi V-Belt INA
Multi V-Belt Overrunning Clutch
Multi V-Belt Overrunning Clutch
INA 1340 (608)
7’10” 1215 (551)
76.7 (1950) 1268 (575)
INA 970 (440)
Yes Yes Yes Yes
INA Standard INA INA
Yes Standard Yes N/A Swath Reducer
Yes Standard INA INA
Spring Loaded Single Spring Hydraulic Single-Acting INA
Every attempt has been made to insure accuracy, but AGCO assumes no responsibility for authenticity of data. presented is obtained from various sources, including manufacturers publications.
Data
Product Training, August 2006
25
COMPETITIVE COMPARISONS MODEL 1329 DISC MOWER MAKE MODEL TRACTOR REQUIREMENTS PTO HP, Minimum hp (kW) PTO Speed RPM Three Point Hitch Category MOWER CAPACITY Cutting Width ft (m) Cutting Angle Cutting Speed.mph (kph) Cutting Capacity A/h (ha/h) CUTTERBAR Style Drive System Lubrication Breakaway Flotation Lift Cylinder Transport Lock CUTTING DISCS Number of Discs Number of Knives per Disc Disc Speed RPM Knife Tip Speed mph (kph) DRIVES Input to Gearcase Protection WEIGHTS AND DIMENSIONS Transport Width in (mm) Weight lb (kg) OPTIONS Topping Skids Swathboard Inner Crop Divider Tall Crop Divider Other
MASSEY FERGUSON 1329
NEW HOLLAND
JOHN DEERE
KUHN
617
275
GMD 700
45.0 (33.6) 540 Category II
60.0 (44.7) 540 Category II
50 (36) 540 Category II
50.0 (37.3) 540 Category II
9.2 (2.79) -25° to +90° 10.0 (16.1) 11.15 (4.5)
9.2 (2.79) -35° to +18° INA INA
9.2 (2.79) -35° to +35° 8.0 (12.9) 8.9 (3.6)
9.2 (2.79) INA INA 9.0 (3.5)
Individual Disc Drive Modular Components Hex Driveshaft
Oil-Bath Gear Cutterbed Intermeshing Gear
Oil-Bath Gear Cutterbed Intermeshing Gears
Grease Spring Loaded Adjustable Hydraulic Single-Acting Mechanical
Oil-Bath Gear Cutterbed Splined Round Driveshaft Oil Spring Loaded Non-Adjustable Hydraulic Single-Acting Mechanical
Oil Yes Non-Adjustable Hydraulic Single-Acting Mechanical
Oil Spring Loaded Adjustable Hydraulic Single-Acting Remote Mechanical
7 2 3000 176 (283)
7 2 3000 175.8
7 2 2986 INA
7 2 INA INA
4V Power Band Belt Overrunning Clutch
Multi V-Belts Overrunning Clutch
Multi V-Belt Optional
Multi V-Belt Overrunning Clutch
INA
INA
INA
1235 (560)
1098 (499)
Tractor Width +9.0 (229) 1247 (567)
Yes Yes Yes Yes
Yes Standard N/A N/A
Yes Standard Yes N/A
1162 (527) N/A Standard Yes N/A Offset Hitch, Quick Hitch Adapter
Every attempt has been made to insure accuracy, but MASSEY FERGUSON assumes no responsibility for authenticity of data. Data presented is obtained from various sources, including manufacturers publications. Product Training, August 2006
26
COMPETITIVE COMPARISONS MODEL 1329 DISC MOWER MAKE MODEL TRACTOR REQUIREMENTS PTO HP, Minimum hp (kW) PTO Speed RPM Three Point Hitch Category mower capacity Cutting Width ft (m) Cutting Angle Cutting Speed.mph (kph) Cutting Capacity aph (haph) CUTTERBAR Style Drive System Lubrication Breakaway Flotation Lift Cylinder Transport Lock CUTTING DISCS Number of Discs Number of Knives per Disc Disc Speed RPM Knife Tip Speed mph (kph) DRIVES Input to Gearcase Protection WEIGHTS AND DIMENSIONS Transport Width in (mm) Weight lb (kg) OPTIONS Topping Skids Swathboard Inner Crop Divider Tall Crop Divider Other
Massey Ferguson 1329
Krone AM 283 S
Bush Hog HM2009
Gehl DM1165
45.0 (33.6) 540 Category II
55.0(40.0) 540 Category I and II
50.0 (37.0) 540 Category II
50.0 (37.3) 540 Category II
9.2 (2.79) -25° to +90° 10.0 (16.1) 11.15 (4.5)
9.2 (2.80) INA 6.6 (10.6) 7.4 (3)
9.2 (2.80) INA 15 (24) INA
9.2 (2.79) INA 6.3 (10.1) 7.0 (3.0)
Individual Disc Drive Modular Components Hex Driveshaft Grease Spring Loaded Adjustable Hydraulic Single-Acting Hydraulic
Oil-Bath Gear Cutterbed Intermeshing Gear Oil Spring Loaded Non-Adjustable Hydraulic Single-Acting INA
Oil-Bath Gear Cutterbed Intermeshing Gear Oil Spring Loaded Non-Adjustble Hydraulic Single-Acting Mechanical
Oil-Bath Gear Cutterbed Intermeshing Gears Oil Spring Loaded Adjustable Hydraulic Single-Acting Mechanical
7 2 3000 176 (283)
7 2 3100 INA
7 2 3000 INA
7 2 3000 INA
4V Power Band Belt Overrunning Clutch
Shaft INA
Multi V-Belt Overrunning Clutch
4 V-Belt Overrunning Clutch
INA
INA
INA
1235 (560)
1235 (560)
1025 (465)
Tractor Width +10.0 (254) 1160 (527)
Yes Yes Yes Yes
INA Standard INA INA
Yes Standard Standard INA
Yes Standard N/A N/A
Every attempt has been made to insure accuracy, but MASSEY FERGUSON assumes no responsibility for authenticity of data. Data presented is obtained from various sources, including manufacturers publications. Product Training, August 2006
27
COMPETITIVE COMPARISONS MODEL 1329 DISC MOWER MAKE MODEL TRACTOR REQUIREMENTS PTO HP, Minimum hp (kW) PTO Speed RPM Three Point Hitch Category MOWER CAPACITY Cutting Width ft (m) Cutting Angle Cutting Speed.mph (kph) Cutting Capacity aph (haph) CUTTERBAR Style Drive System Lubrication Breakaway Flotation Lift Cylinder Transport Lock CUTTING DISCS Number of Discs Number of Knives per Disc Disc Speed RPM Knife Tip Speed mph (kph) DRIVES Input to Gearcase Protection WEIGHTS AND DIMENSIONS Transport Width in (mm) Weight lb (kg) OPTIONS Topping Skids Swathboard Inner Crop Divider Tall Crop Divider Other
Massey Ferguson 1329
Vermeer 7030
Vicon DMP 2800
45.0 (33.6) 540 Category II
70.0 (49.0) 540 Category II
55.0 (41.0) 540 Category II
9.2 (2.79) -25° to +90° 10.0 (16.1) 11.15 (4.5)
9.2 (2.79) INA 9 (14.5) 10.0 (4.0)
9.2 (2.80) -90° to +36° 9.3 (15.0) INA
Individual Disc Drive Modular Components Hex Driveshaft Grease Spring Loaded Adjustable Hydraulic Single-Acting Hydraulic
Individual Disc Drive Modular Components Hex Driveshaft Oil Spring Loaded Non-Adjustable Hydraulic Single-Acting Mechanical
Oil-Bath Gear Cutterbed Intermeshing Gears Oil Spring Loaded Non-Adjustable Hydraulic Single-Acting Mechanical
7 2 3000 176 (283)
7 2 2850 168 (270)
8 3 2800 168 (270)
4V Power Band Belt Overrunning Clutch
Multi V-Belt N/A
Multi V-Belt Overrunning Clutch
INA 1235 (560)
94 (2388) 1291 (585)
INA 1320 (600)
Yes Yes Yes Yes
Yes Standard Yes N/A
Yes Standard IYes INA
Every attempt has been made to insure accuracy, but MASSEY FERGUSON assumes no responsibility for authenticity of data. Data presented is obtained from various sources, including manufacturers publications. Product Training, August 2006
28
COMPETITIVE COMPARISONS MODEL 1330 DISC MOWER MAKE MODEL TRACTOR REQUIREMENTS PTO HP, Minimum hp (kW) PTO Speed RPM Three Point Hitch Category MOWER CAPACITY Cutting Width ft (m) Cutting Angle Cutting Speed.mph (kph) Cutting Capacity A/h (ha/h) CUTTERBAR Style Drive System Lubrication Breakaway Flotation Lift Cylinder Transport Lock CUTTING DISCS Number of Discs Number of Knives per Disc Disc Speed RPM Knife Tip Speed mph (kph) DRIVES Input to Gearcase Protection WEIGHTS AND DIMENSIONS Transport Width in (mm) Weight lb (kg) OPTIONS Topping Skids Swathboard Inner Crop Divider Tall Crop Divider Other
MASSEY FERGUSON 1330
KRONE
VERMEER
KUHN
AM 323 S
8030
GMD 800
50.0 (37.0) 540 Category II
68(50.0) 540 Category I and II
80.0 (60.0) 540 Category II
56.0 (41.0) 540 Category II
10.3 (3.15) -25° to +90° 10.0 (16.1) 12.5(5.1)
10.5 (3.2) INA INA INA
10.5 (3.2) INA 9 (14.5) 11.4 (4.6)
10.2(3.10) -35° to +N/A INA INA
Individual Disc Drive Oil-Bath Gear Cutterbed Individual Disc Drive Oil-Bath Gear Cutterbed Modular Components Modular Components Hex Driveshaft Intermeshing Gear Hex Driveshaft Intermeshing Gears Grease Oil Oil Oil Spring Loaded Spring Loaded Spring Loaded Spring Loaded Adjustable Non-Adjustable Non-Adjustable Adjustable Hydraulic Hydraulic Hydraulic Hydraulic Single-Acting Single-Acting Single-Acting Single-Acting Mechanical Mechanical Mechanical Remote Mechanical 8 2 3000 176 (283)
8 2 3100 INA
8 2 2850 168 (270)
8 2 INA INA
4V Banded Belt Overrunning Clutch
Shaft INA
Multi V-Belt N/A
Multi V-Belt Overrunning Clutch
INA 1510 (686)
INA 1366 (620)
94 (2388) 1380 (626)
INA 1421(646)
Yes Yes Yes Yes
INA Standard INA INA
Yes Standard Yes N/A
Yes Standard Yes N/A
Every attempt has been made to insure accuracy, but MASSEY FERGUSON assumes no responsibility for authenticity of data. Data presented is obtained from various sources, including manufacturers publications. Product Training, August 2006
29
COMPETITIVE COMPARISONS MODEL 1330 DISC MOWER MAKE MODEL TRACTOR REQUIREMENTS PTO HP, Minimum hp (kW) PTO Speed RPM Three Point Hitch Category MOWER CAPACITY Cutting Width ft (m) Cutting Angle Cutting Speed.mph (kph) Cutting Capacity aph (haph) CUTTERBAR Style Drive System Lubrication Breakaway Flotation Lift Cylinder Transport Lock CUTTING DISCS Number of Discs Number of Knives per Disc Disc Speed RPM Knife Tip Speed mph (kph) DRIVES Input to Gearcase Protection WEIGHTS AND DIMENSIONS Transport Width in (mm) Weight lb (kg) OPTIONS Topping Skids Swathboard Inner Crop Divider Tall Crop Divider Other
MASSEY FERGUSON 1330
VICON DMP 3200
50.0 (37.0) 540 Category II
65.0 (48.0) 540 Category II
10.3 (3.15) -25° to +90° 10.0 (16.1) 12.5(5.1)
10.5 (3.2) -36° to +90° INA INA
Individual Disc Drive Modular Components Hex Driveshaft Grease Spring Loaded Adjustable Hydraulic Single-Acting Hydraulic
Oil-Bath Gear Cutterbed Intermeshing Gears Oil Spring Loaded Non-Adjustable Hydraulic Single-Acting Mechanical
8 2 3000 176 (283)
8 3 2800 168 (270)
4V Banded Belt Overrunning Clutch
Multi V-Belt Overrunning Clutch
INA 1510 (686)
INA 1320 (600)
Yes Yes Yes Yes
Yes Standard Yes INA
Every attempt has been made to insure accuracy, but MASSEY FERGUSON assumes no responsibility for authenticity of data. Data presented is obtained from various sources, including manufacturers publications. Product Training, August 2006
30
COMPETITIVE COMPARISONS MASSEY FERGUSON 1300 SERIES DISC MOWERS The Massey Ferguson® 1300 series includes 5 models of 3-point hitch mounted rotary disc mowers. The 1300 series include hydraulic cutterbar lift, spring flotation, and damage reducing “cutterbar breakaway”. They also feature a modular, segmented-shaft cutterbar drive that isolates any damage and makes maintenance much quicker. The 1300 series are simple, efficient mowers with no conditioning attachment. Massey Ferguson 1300 features to sell against the New Holland 600 series ♦ Massey Ferguson® has 5 models 5’6”, 6’8”, 7’10”, 9’2”, and 10’4”. New Holland has only 3 models 6’8”, 7’10”, and 9’2”. ♦ Massey Ferguson can use EP-0 grease in the cutterbar modules which is less likely to leak than New Holland’s thinner oil. ♦ Massey Ferguson® 1300 series mowers require significantly less horsepower than New Holland. ♦ New Holland recommends manually raising their cutterbar curtain and tying it back with a bungee cord before lifting the mower into transport position. Massey Ferguson 1300 features to sell against John Deere 200 series, Kuhn GMD series, Krone AM Series, Vicon CM series, Claas Disco 260/300, and Panorama disc mowers. ♦ Massey Ferguson 1300 series mowers feature a modular, segmented shaft cutterbar with sealed bearings. These manufacturers use single reservoir, open bearing, gear to gear cutterbeds. The problems with these cutterbeds are: • Any contamination will ruin the entire cutterbed because the bearings and gears are lubricated by the single reservoir of oil. • Higher internal gear speed creates more heat and breaks down oil faster. • Higher horsepower requirements because their gears are running in a pool of oil. • All their oil will run to one end of the cutterbed when cutting on slopes, leaving the upper bearings and gears “starving for oil”. • It is hard to control torsion and flexing in a cantilevered gear to gear cutterbed. This flexing of the cutterbed can cause uneven wear or binding. ♦ Krone uses an “expensive to maintain” shaft and u-joint system to transfer power to their cutterbed. Massey Ferguson uses an efficient, multiple belt drive to transfer the power from the PTO shaft to the cutterbar. These belts also offer slip protection. Massey Ferguson 1300 series are built sturdier than these brands. ♦ Massey Ferguson has 5 different cutting widths • Claas has only 2 cutting widths, 8’6” and 9’10”. • John Deere, Vicon and Panorama have only 3 cutting widths. JD 5’4”, 7’10” and 9’2”. Vicon 5’6”, 7’2”, and 7’10”. Panorama 6’8”, 8’, and 9’2”.
31
COMPETITIVE COMPARISONS MASSEY FERGUSON 1300 SERIES DISC MOWERS Massey Ferguson 1300 features to sell against Vermeer Gator series, Lely Splendimo and M&W disc mowers. ♦ Massey Ferguson 1300 series mowers feature “segmented cutterbar drive shafts” which make maintenance quicker and easier. Lely and M&W use a single drive shaft that has to be completely removed to replace any module. Vermeer uses two drive shafts instead of a separate drive shaft between each module. If these “full length” shafts are at all twisted, they can be really difficult to remove. ♦ Lely uses an “expensive to maintain” shaft and u-joint system to transfer power to their cutterbed. Massey Ferguson 1300’s use an efficient, multiple belt drive to transfer the power from the PTO shaft to the cutterbar. These belts also offer slip protection. ♦ Massey Ferguson 1300 series are built sturdier. ♦ Massey Ferguson 1300 series have lower horsepower requirements than these mowers. ♦ Massey Ferguson has 5 cutting widths. Vermeer and Lely have only 2 and M&W has only 3. Vermeer and Lely 7’10” and 9’2”. M&W 6’9”, 8’, and 9’4”.
32