Cree® XLamp® XM-L EasyWhite® LEDs
Product Description
FEATURES
Table of Contents
The XLamp XM-L EasyWhite LED
• Available in 4-step and 2-step
Characteristics............................. 2
eliminates
chromaticity
binning,
EasyWhite bins at 2700 K,
Flux Characteristics, Standard Order
and enables luminaire and bulb
3000 K, 3500 K, 4000 K, 5000 K
Codes and Bins, 6-Volt XM-L EZW... 3
manufacturers
CCT
Flux Characteristics, Standard Order
to
deliver
the
consistent color and high efficacy light output of a multi‑die LED in
• Wide range of operating current – up to 2 A @ 6 V
the compact XM-L footprint. XLamp
• 85 °C binning and
XM-L EasyWhite LEDs can reduce
characterization
LED-to-LED color variation to within a 2‑step MacAdam ellipse, 94% smaller than the total area of the corresponding ANSI C78.377 color region.
• Available in 6‑V and 12‑V versions • Low thermal resistance: 2.5 °C/W
Relative Spectral Power Distribution................................. 9 Relative Flux vs. Junction Temperature................................ 9 Electrical Characteristics...............10 Relative Flux vs. Current..............11 Relative Chromaticity vs. Current
• Wide viewing angle: 115°
and Temperature.........................12
• Wide variety of CRI choices:
Typical Spatial Distribution............13
standard CRI as well as 80-,
Thermal Design...........................13
is the perfect choice for lighting
85-, 90‑minimum CRI
Performance Groups – Brightness..14
applications where moderate to high
• Electrically neutral thermal path
Performance Groups –
luminous flux output is required
• Unlimited floor life at
Chromaticity...............................15
from a single, small point source.
≤ 30 ºC/85% RH
retrofit
bulbs,
commercial/retail
• Reflow solderable - JEDEC J‑STD‑020C
Cree EasyWhite Bins Plotted on the 1931 CIE Color Space..................16 Cree ANSI White Bins Plotted on
display spotlights, and other indoor
• RoHS‑ and REACh-compliant
the 1931 CIE Color Space.............16
general-illumination applications.
• UL-recognized component
Bin and Order Code Format...........17
(E349212) WWW.CREE.COM/XLAMP
Codes and Bins, 12-Volt XM-L EZW .6
The XLamp XM-L EasyWhite LED
Example applications include: LED
CLD-DS38 Rev 6A
Product family data sheet
Reflow Soldering Characteristics....18 Notes.........................................19 Mechanical Dimensions................20 Tape and Reel.............................21 Packaging...................................22
Copyright © 2010 2011-2013 Inc. All rights reserved. The information this document is subject to change without Copyright © Cree, Cree, Inc.®All rights reserved. The information in thisindocument is subject to change without notice.notice. ® Cree®,the theCree Creelogo logo, XLamp are registered trademarks Cree, and XLampand areEasyWhite registered trademarks of Cree, Inc. of Cree, Inc.
Cree, Inc. Cree,Drive Inc. 4600 Silicon 4600 Silicon Drive Durham, NC 27703 NC 27703 USA Tel:Durham, +1.919.313.5300 USA Tel: +1.919.313.5300 www.cree.com/xlamp
xlamp xm-l easywhite leds
Characteristics Characteristics
Unit
Thermal resistance, junction to solder point
°C/W
Viewing angle (FWHM)
Minimum
Typical 2.5
degrees
115
Temperature coefficient of voltage (6 V)
mV/°C
-6.0
Temperature coefficient of voltage (12 V)
mV/°C
-12.0
ESD withstand voltage (HBM per Mil-Std-883D)
Maximum
V
8000
DC forward current (6 V)
mA
2000
DC forward current (12 V)
mA
1000
Reverse current (6 V, 12 V)
mA
-0.1
Forward voltage (@ 700 mA, 85 °C, 6 V)
V
5.7
7.0
Forward voltage (@ 350 mA, 85 °C, 12 V)
V
11.5
14.0
LED junction temperature
°C
150
® ® ® Copyright © 2010 2011-2013 Cree,AllInc. All rights reserved. The information this document is subject to change Cree , the Cree XLamp and EasyWhite are Copyright © Cree, Inc. rights reserved. The information in this in document is subject to change withoutwithout notice. notice. Cree, the Cree logo andlogo, XLamp are registered trademarks registered trademarks of Cree, Inc. of Cree, Inc.
2
xlamp xm-l easywhite leds
Flux Characteristics, Standard Order Codes and Bins, 6-Volt XM-L EZW (700 mA, Tj = 85 °C) The following table provides the order codes for 6-Volt XLamp XM-L EZW LEDs.
Color
CCT Range
5000 K
4000 K
Standard CRI EasyWhite
3500 K
3000 K
2700 K
Base Order Codes Min. Luminous Flux @ 700 mA
2-Step Order Code
4-Step Order Code
Group
Flux (lm) @ 85 °C
Flux (lm) @ 25 °C*
U4
340
404
U5
360
427
U6
380
451
V2
400
475
XMLEZW-00-0000-0B00V250H
XMLEZW-00-0000-0B00V250F
U2
300
356
XMLEZW-00-0000-0B00U240H
XMLEZW-00-0000-0B00U240F
U3
320
380
U4
340
404
XMLEZW-00-0000-0B00U440H
XMLEZW-00-0000-0B00U440F
T6
280
332
XMLEZW-00-0000-0B00T635H
XMLEZW-00-0000-0B00T635F
U2
300
356
U3
320
380
XMLEZW-00-0000-0B00U335H
XMLEZW-00-0000-0B00U335F
T5
260
309
XMLEZW-00-0000-0B00T530H
XMLEZW-00-0000-0B00T530F
T6
280
332
U2
300
356
U3
320
380
XMLEZW-00-0000-0B00U330H
XMLEZW-00-0000-0B00U330F
T4
240
285
XMLEZW-00-0000-0B00T427H
XMLEZW-00-0000-0B00T427F
T5
260
309
T6
280
332
U2
300
356
Chromaticity Region
Chromaticity Region XMLEZW-00-0000-0B00U450H
50H
40H
35H
30H
27H
XMLEZW-00-0000-0B00U550H XMLEZW-00-0000-0B00U650H
XMLEZW-00-0000-0B00U340H
XMLEZW-00-0000-0B00U235H
XMLEZW-00-0000-0B00T630H XMLEZW-00-0000-0B00U230H
XMLEZW-00-0000-0B00T527H XMLEZW-00-0000-0B00T627H XMLEZW-00-0000-0B00U227H
XMLEZW-00-0000-0B00U450F 50F
40F
35F
30F
27F
XMLEZW-00-0000-0B00U550F XMLEZW-00-0000-0B00U650F
XMLEZW-00-0000-0B00U340F
XMLEZW-00-0000-0B00U235F
XMLEZW-00-0000-0B00T630F XMLEZW-00-0000-0B00U230F
XMLEZW-00-0000-0B00T527F XMLEZW-00-0000-0B00T627F XMLEZW-00-0000-0B00U227F
Notes: • For Standard CRI parts, typical CRI is 80 for 4000–3500-K CCT parts and typical CRI is 82 for 3000–2700-K CCT. • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. * Flux values @ 25 °C are calculated and for reference only.
® ® ® Copyright © 2010 2011-2013 Cree,AllInc. All rights reserved. The information this document is subject to change Cree , the Cree XLamp and EasyWhite are Copyright © Cree, Inc. rights reserved. The information in this in document is subject to change withoutwithout notice. notice. Cree, the Cree logo andlogo, XLamp are registered trademarks registered trademarks of Cree, Inc. of Cree, Inc.
3
xlamp xm-l easywhite leds
Flux Characteristics, Standard Order Codes and Bins, 6-Volt XM-L EZW (700 mA, Tj = 85 °C) - Continued
Color
CCT Range
4000 K
3500 K
80-CRI Minimum EasyWhite 3000 K
2700 K
3000 K 85-CRI Minimum EasyWhite 2700 K
Base Order Codes Min. Luminous Flux @ 700 mA
2-Step Order Code
4-Step Order Code
Group
Flux (lm) @ 85 °C
Flux (lm) @ 25 °C*
U2
300
356
U3
320
380
U4
340
404
XMLEZW-00-0000-0B0HU440H
XMLEZW-00-0000-0B0HU440F
T5
260
309
XMLEZW-00-0000-0B0HT535H
XMLEZW-00-0000-0B0HT535F
T6
280
332
U2
300
356
U3
320
380
XMLEZW-00-0000-0B0HU335H
XMLEZW-00-0000-0B0HU335F
T5
260
309
XMLEZW-00-0000-0B0HT530H
XMLEZW-00-0000-0B0HT530F
T6
280
332
U2
300
356
U3
320
380
XMLEZW-00-0000-0B0HU330H
XMLEZW-00-0000-0B0HU330F
T4
240
285
XMLEZW-00-0000-0B0HT427H
XMLEZW-00-0000-0B0HT427F
T5
260
309
T6
280
332
Chromaticity Region
Chromaticity Region XMLEZW-00-0000-0B0HU240H
40H
35H
30H
27H
XMLEZW-00-0000-0B0HU340H
XMLEZW-00-0000-0B0HT635H XMLEZW-00-0000-0B0HU235H
XMLEZW-00-0000-0B0HT630H XMLEZW-00-0000-0B0HU230H
XMLEZW-00-0000-0B0HT527H XMLEZW-00-0000-0B0HT627H
XMLEZW-00-0000-0B0HU240F 40F
35F
30F
27F
XMLEZW-00-0000-0B0HU340F
XMLEZW-00-0000-0B0HT635F XMLEZW-00-0000-0B0HU235F
XMLEZW-00-0000-0B0HT630F XMLEZW-00-0000-0B0HU230F
XMLEZW-00-0000-0B0HT527F XMLEZW-00-0000-0B0HT627F
U2
300
356
XMLEZW-00-0000-0B0HU227H
XMLEZW-00-0000-0B0HU227F
T3
220
261
XMLEZW-00-0000-0B0PT330H
XMLEZW-00-0000-0B0PT330F
T4
240
285
XMLEZW-00-0000-0B0PT430H 30H
T5
260
309
T6
280
332
XMLEZW-00-0000-0B0PT630H
XMLEZW-00-0000-0B0PT630F
T2
200
237
XMLEZW-00-0000-0B0PT227H
XMLEZW-00-0000-0B0PT227F
T3
220
261
T4
240
285
T5
260
309
27H
XMLEZW-00-0000-0B0PT530H
XMLEZW-00-0000-0B0PT430F 30F
XMLEZW-00-0000-0B0PT327H XMLEZW-00-0000-0B0PT427H XMLEZW-00-0000-0B0PT527H
27F
XMLEZW-00-0000-0B0PT530F
XMLEZW-00-0000-0B0PT327F XMLEZW-00-0000-0B0PT427F XMLEZW-00-0000-0B0PT527F
Notes: • For Standard CRI parts, typical CRI is 80 for 4000–3500-K CCT parts and typical CRI is 82 for 3000–2700-K CCT. • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. * Flux values @ 25 °C are calculated and for reference only.
® ® ® Copyright © 2010 2011-2013 Cree,AllInc. All rights reserved. The information this document is subject to change Cree , the Cree XLamp and EasyWhite are Copyright © Cree, Inc. rights reserved. The information in this in document is subject to change withoutwithout notice. notice. Cree, the Cree logo andlogo, XLamp are registered trademarks registered trademarks of Cree, Inc. of Cree, Inc.
4
xlamp xm-l easywhite leds
Flux Characteristics, Standard Order Codes and Bins, 6-Volt XM-L EZW (700 mA, Tj = 85 °C) - Continued
CCT Range
Color
3000 K 90-CRI Minimum EasyWhite 2700 K
Color
ANSI White
Base Order Codes Min. Luminous Flux @ 700 mA
2-Step Order Code
4-Step Order Code
Group
Flux (lm) @ 85 °C
Flux (lm) @ 25 °C*
T2
200
237
T3
220
261
T4
240
285
T5
260
309
XMLEZW-00-0000-0B0UT530H
XMLEZW-00-0000-0B0UT530F
S6
180
214
XMLEZW-00-0000-0B0US627H
XMLEZW-00-0000-0B0US627F
T2
200
237
XMLEZW-00-0000-0B0UT227H
T3
220
261
T4
240
285
Chromaticity Region XMLEZW-00-0000-0B0UT230H XMLEZW-00-0000-0B0UT330H
30H
XMLEZW-00-0000-0B0UT430H
27H
XMLEZW-00-0000-0B0UT327H XMLEZW-00-0000-0B0UT427H
Base Order Codes Min Luminous Flux @ 700 mA
CCT Range
5000 K
Chromaticity Region
Chromaticity Regions
Group
Flux (lm) @ 85 °C
Flux (lm) @ 25 °C*
U4
340
404
U5
360
427
U6
380
451
V2
400
475
XMLEZW-00-0000-0B0UT230F 30F
27F
XMLEZW-00-0000-0B0UT330F XMLEZW-00-0000-0B0UT430F
XMLEZW-00-0000-0B0UT227F XMLEZW-00-0000-0B0UT327F XMLEZW-00-0000-0B0UT427F
Order Code
XMLEZW-00-0000-0B00U40E3 0E3
XMLEZW-00-0000-0B00U50E3 XMLEZW-00-0000-0B00U60E3 XMLEZW-00-0000-0B00V20E3
Notes: • For Standard CRI parts, typical CRI is 80 for 4000–3500-K CCT parts and typical CRI is 82 for 3000–2700-K CCT. • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. * Flux values @ 25 °C are calculated and for reference only.
® ® ® Copyright © 2010 2011-2013 Cree,AllInc. All rights reserved. The information this document is subject to change Cree , the Cree XLamp and EasyWhite are Copyright © Cree, Inc. rights reserved. The information in this in document is subject to change withoutwithout notice. notice. Cree, the Cree logo andlogo, XLamp are registered trademarks registered trademarks of Cree, Inc. of Cree, Inc.
5
xlamp xm-l easywhite leds
Flux Characteristics, Standard Order Codes and Bins, 12-Volt XM-L EZW (350 ma, TJ = 85 °C) The following table provides the order codes for 12-Volt XLamp XM-L EZW LEDs.
Color
CCT Range
5000 K
4000 K
Standard CRI EasyWhite
3500 K
3000 K
2700 K
Base Order Codes Min. Luminous Flux @ 350 mA
2-Step Order Code
4-Step Order Code
Group
Flux (lm) @ 85 °C
Flux (lm) @ 25 °C*
U4
340
404
U5
360
427
U6
380
451
V2
400
475
XMLEZW-00-0000-0D00V250H
XMLEZW-00-0000-0D00V250F
U2
300
356
XMLEZW-00-0000-0D00U240H
XMLEZW-00-0000-0D00U240F
U3
320
380
U4
340
404
XMLEZW-00-0000-0D00U440H
XMLEZW-00-0000-0D00U440F
T6
280
332
XMLEZW-00-0000-0D00T635H
XMLEZW-00-0000-0D00T635F
U2
300
356
U3
320
380
XMLEZW-00-0000-0D00U335H
XMLEZW-00-0000-0D00U335F
T5
260
309
XMLEZW-00-0000-0D00T530H
XMLEZW-00-0000-0D00T530F
T6
280
332
U2
300
356
U3
320
380
XMLEZW-00-0000-0D00U330H
XMLEZW-00-0000-0D00U330F
T4
240
285
XMLEZW-00-0000-0D00T427H
XMLEZW-00-0000-0D00T427F
T5
260
309
T6
280
332
U2
300
356
Chromaticity Region
Chromaticity Region XMLEZW-00-0000-0D00U450H
50H
40H
35H
30H
27H
XMLEZW-00-0000-0D00U550H XMLEZW-00-0000-0D00U650H
XMLEZW-00-0000-0D00U340H
XMLEZW-00-0000-0D00U235H
XMLEZW-00-0000-0D00T630H XMLEZW-00-0000-0D00U230H
XMLEZW-00-0000-0D00T527H XMLEZW-00-0000-0D00T627H XMLEZW-00-0000-0D00U227H
XMLEZW-00-0000-0D00U450F 50F
40F
35F
30F
27F
XMLEZW-00-0000-0D00U550F XMLEZW-00-0000-0D00U650F
XMLEZW-00-0000-0D00U340F
XMLEZW-00-0000-0D00U235F
XMLEZW-00-0000-0D00T630F XMLEZW-00-0000-0D00U230F
XMLEZW-00-0000-0D00T527F XMLEZW-00-0000-0D00T627F XMLEZW-00-0000-0D00U227F
Notes: • For Standard CRI parts, typical CRI is 80 for 4000–3500-K CCT parts and typical CRI is 82 for 3000–2700-K CCT. • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. * Flux values @ 25 °C are calculated and for reference only.
® ® ® Copyright © 2010 2011-2013 Cree,AllInc. All rights reserved. The information this document is subject to change Cree , the Cree XLamp and EasyWhite are Copyright © Cree, Inc. rights reserved. The information in this in document is subject to change withoutwithout notice. notice. Cree, the Cree logo andlogo, XLamp are registered trademarks registered trademarks of Cree, Inc. of Cree, Inc.
6
xlamp xm-l easywhite leds
Flux Characteristics, Standard Order Codes and Bins, 12-Volt XM-L EZW (350 ma, TJ = 85 °C) - Continued
Color
CCT Range
4000 K
3500 K
80-CRI Minimum EasyWhite 3000 K
2700 K
3000 K 85-CRI Minimum EasyWhite 2700 K
Base Order Codes Min. Luminous Flux @ 350 mA
2-Step Order Code
4-Step Order Code
Group
Flux (lm) @ 85 °C
Flux (lm) @ 25 °C*
U2
300
356
U3
320
380
U4
340
404
XMLEZW-00-0000-0D0HU440H
XMLEZW-00-0000-0D0HU440F
T5
260
309
XMLEZW-00-0000-0D0HT535H
XMLEZW-00-0000-0D0HT535F
T6
280
332
U2
300
356
U3
320
380
XMLEZW-00-0000-0D0HU335H
XMLEZW-00-0000-0D0HU335F
T5
260
309
XMLEZW-00-0000-0D0HT530H
XMLEZW-00-0000-0D0HT530F
T6
280
332
XMLEZW-00-0000-0D0HT630H
U2
300
356
U3
320
380
XMLEZW-00-0000-0D0HU330H
XMLEZW-00-0000-0D0HU330F
T4
240
285
XMLEZW-00-0000-0D0HT427H
XMLEZW-00-0000-0D0HT427F
T5
260
309
T6
280
332
U2
300
356
XMLEZW-00-0000-0D0HU227H
XMLEZW-00-0000-0D0HU227F
T3
220
261
XMLEZW-00-0000-0D0PT330H
XMLEZW-00-0000-0D0PT330F
T4
240
285
Chromaticity Region
Chromaticity Region XMLEZW-00-0000-0D0HU240H
40H
35H
30H
27H
XMLEZW-00-0000-0D0HU340H
XMLEZW-00-0000-0D0HT635H XMLEZW-00-0000-0D0HU235H
XMLEZW-00-0000-0D0HU230H
XMLEZW-00-0000-0D0HT527H XMLEZW-00-0000-0D0HT627H
XMLEZW-00-0000-0D0HU240F 40F
35F
30F
27F
XMLEZW-00-0000-0D0PT430H 30H
XMLEZW-00-0000-0D0HT635F XMLEZW-00-0000-0D0HU235F
XMLEZW-00-0000-0D0HT630F XMLEZW-00-0000-0D0HU230F
XMLEZW-00-0000-0D0HT527F XMLEZW-00-0000-0D0HT627F
XMLEZW-00-0000-0D0PT430F 30F
T5
260
309
T6
280
332
XMLEZW-00-0000-0D0PT630H
XMLEZW-00-0000-0D0PT630F
T2
200
237
XMLEZW-00-0000-0D0PT227H
XMLEZW-00-0000-0D0PT227F
T3
220
261
T4
240
285
T5
260
309
27H
XMLEZW-00-0000-0D0PT530H
XMLEZW-00-0000-0D0HU340F
XMLEZW-00-0000-0D0PT327H XMLEZW-00-0000-0D0PT427H XMLEZW-00-0000-0D0PT527H
27F
XMLEZW-00-0000-0D0PT530F
XMLEZW-00-0000-0D0PT327F XMLEZW-00-0000-0D0PT427F XMLEZW-00-0000-0D0PT527F
Notes: • For Standard CRI parts, typical CRI is 80 for 4000–3500-K CCT parts and typical CRI is 82 for 3000–2700-K CCT. • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. * Flux values @ 25 °C are calculated and for reference only.
® ® ® Copyright © 2010 2011-2013 Cree,AllInc. All rights reserved. The information this document is subject to change Cree , the Cree XLamp and EasyWhite are Copyright © Cree, Inc. rights reserved. The information in this in document is subject to change withoutwithout notice. notice. Cree, the Cree logo andlogo, XLamp are registered trademarks registered trademarks of Cree, Inc. of Cree, Inc.
7
xlamp xm-l easywhite leds
Flux Characteristics, Standard Order Codes and Bins, 12-Volt XM-L EZW (350 ma, TJ = 85 °C) - Continued
CCT Range
Color
3000 K 90-CRI Minimum EasyWhite 2700 K
Color
ANSI White
Base Order Codes Min. Luminous Flux @ 350 mA
2-Step Order Code
4-Step Order Code
Group
Flux (lm) @ 85 °C
Flux (lm) @ 25 °C*
T2
200
237
T3
220
261
T4
240
285
T5
260
309
XMLEZW-00-0000-0D0UT530H
XMLEZW-00-0000-0D0UT530F
S6
180
214
XMLEZW-00-0000-0D0US627H
XMLEZW-00-0000-0D0US627F
T2
200
237
T3
220
261
T4
240
285
Chromaticity Region XMLEZW-00-0000-0D0UT230H XMLEZW-00-0000-0D0UT330H
30H
XMLEZW-00-0000-0D0UT430H
XMLEZW-00-0000-0D0UT227H
27H
XMLEZW-00-0000-0D0UT327H XMLEZW-00-0000-0D0UT427H
Base Order Codes Min Luminous Flux @ 350 mA
CCT Range
5000 K
Chromaticity Region
Chromaticity Regions
Group
Flux (lm) @ 85 °C
Flux (lm) @ 25 °C*
U4
340
404
U5
360
427
U6
380
451
V2
400
475
XMLEZW-00-0000-0D0UT230F 30F
27F
XMLEZW-00-0000-0D0UT330F XMLEZW-00-0000-0D0UT430F
XMLEZW-00-0000-0D0UT227F XMLEZW-00-0000-0D0UT327F XMLEZW-00-0000-0D0UT427F
Order Code
XMLEZW-00-0000-0D00U40E3 0E3
XMLEZW-00-0000-0D00U50E3 XMLEZW-00-0000-0D00U60E3 XMLEZW-00-0000-0D00V20E3
Notes: • For Standard CRI parts, typical CRI is 80 for 4000–3500-K CCT parts and typical CRI is 82 for 3000–2700-K CCT. • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. * Flux values @ 25 °C are calculated and for reference only.
® ® ® Copyright © 2010 2011-2013 Cree,AllInc. All rights reserved. The information this document is subject to change Cree , the Cree XLamp and EasyWhite are Copyright © Cree, Inc. rights reserved. The information in this in document is subject to change withoutwithout notice. notice. Cree, the Cree logo andlogo, XLamp are registered trademarks registered trademarks of Cree, Inc. of Cree, Inc.
8
xlamp xm-l easywhite leds
Relative Spectral Power Relative Spectral Power Distribution (3000-K CCT)
Relative Radiant Power (%)
100
80
60
5000 K CCT 3000 K CCT 40
20
0 400
450
500
550
600
650
700
750
Wavelength (nm)
Relative Flux Output vs. Junction Temperature Relative Flux vs. Junction Temperature (6-V - IF = 700 mA; 12-V - IF = 350 mA)
Relative Luminous Flux
120%
100%
80%
60%
40%
20%
0% 25
50
75
100
125
150
Junction Temperature (ºC)
® ® ® Copyright © 2010 2011-2013 Cree,AllInc. All rights reserved. The information this document is subject to change Cree , the Cree XLamp and EasyWhite are Copyright © Cree, Inc. rights reserved. The information in this in document is subject to change withoutwithout notice. notice. Cree, the Cree logo andlogo, XLamp are registered trademarks registered trademarks of Cree, Inc. of Cree, Inc.
9
xlamp xm-l easywhite leds
Electrical Characteristics (Tj = 85ºC)
Electrical Characteristics (TJ = 85 °C) 2000
Forward Current (mA)
1750 1500
1250 1000
XM-L EZW, 6V
750 500 250 0 5.20
5.40
5.60
5.80
6.00
6.20
6.40
Forward Voltage (V)
Forward Current (mA)
1000
750
500
XM-L EZW 12V
250
0 10.00
10.50
11.00
11.50
12.00
12.50
13.00
Forward Voltage (V)
® ® ® Copyright © 2010 2011-2013 Cree,AllInc. All rights reserved. The information this document is subject to change Cree , the Cree XLamp and EasyWhite are Copyright © Cree, Inc. rights reserved. The information in this in document is subject to change withoutwithout notice. notice. Cree, the Cree logo andlogo, XLamp are registered trademarks registered trademarks of Cree, Inc. of Cree, Inc.
10
xlamp xm-l easywhite leds
Relative LF vs. IFlux @ 85 vs. Current (TJ = 85°C)
Relative Luminous Flux (%)
225% 200%
175% 150% 125%
XM-L EZW 6V
100% 75%
50% 25% 0% 0
250
500
750
1000
1250
1500
1750
2000
Forward Current (mA)
Relative Luminous Flux (%)
225% 200% 175% 150% 125%
XM-L EZW 12V
100% 75% 50% 25% 0%
0
200
400
600
800
1000
Forward Current (mA)
® ® ® Copyright © 2010 2011-2013 Cree,AllInc. All rights reserved. The information this document is subject to change Cree , the Cree XLamp and EasyWhite are Copyright © Cree, Inc. rights reserved. The information in this in document is subject to change withoutwithout notice. notice. Cree, the Cree logo andlogo, XLamp are registered trademarks registered trademarks of Cree, Inc. of Cree, Inc.
11
xlamp xm-l easywhite leds
XM-L EZW 6V Relative Chromaticity vs. Current and Temperature 0.020 0.015
XM-L EZW 6V
0.010
0.020
0.005
0.015
0.000
0.010
ΔCCx
-0.005
0.005
ΔCCy
-0.010
0.000
-0.015 ΔCCx
-0.005
-0.020 ΔCCy
-0.010
0
500
-0.015
1000
1500
2000
Current (mA)
-0.020 0
500
1000
1500
2000
Current (mA)
XM-L EZW 12V 0.020 0.015
XM-L EZW 12V
0.010
0.020
0.005
0.015
0.000
0.010
-0.005
0.005
-0.010
0.000
-0.015
-0.005
-0.020 ΔCCx 0ΔCCy
-0.010
ΔCCx ΔCCy
200
400
800
1000
Current (mA)
-0.015
XM-L EZW, 6V, 12V
-0.020 0.020 0 0.015
600
200
400
600
800
1000
Current (mA)
0.010 0.005
0.000 ΔCCx
-0.005
ΔCCy
-0.010 -0.015
-0.020 25
50
75
100
125
150
Tsp (°C) ® ® ® Copyright © 2010 2011-2013 Cree,AllInc. All rights reserved. The information this document is subject to change Cree , the Cree XLamp and EasyWhite are Copyright © Cree, Inc. rights reserved. The information in this in document is subject to change withoutwithout notice. notice. Cree, the Cree logo andlogo, XLamp are registered trademarks registered trademarks of Cree, Inc. of Cree, Inc.
12
xlamp xm-l easywhite leds
Typical Spatial Radiation Pattern
Typical Spatial Distribution
Relative Luminous Intensity (%)
100
80
60
40
20
0 -100
-80
-60
-40
-20
0
20
40
60
80
100
Angle (º)
Thermal Design The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics.
Thermal Design (6V) from XML DS
Thermal Design (12V) from XML DS
XLamp XM-L EZW, 6-V
1200
2500
1000
2000
Maximum Current (mA)
Maximum Current (mA)
XLamp XM-L EZW, 12-V
1500
1000
Rj-a = 4°C/W Rj-a = 7°C/W
500
Rj-a = 10°C/W
800
600
400
Rj-a = 4°C/W
Rj-a = 7°C/W
200
Rj-a = 10°C/W
Rj-a = 15°C/W
Rj-a = 15°C/W
0
0 0
20
40
60
80
100
Ambient Temperature (ºC)
120
140
0
20
40
60
80
100
120
140
Ambient Temperature (ºC)
® ® ® Copyright © 2010 2011-2013 Cree,AllInc. All rights reserved. The information this document is subject to change Cree , the Cree XLamp and EasyWhite are Copyright © Cree, Inc. rights reserved. The information in this in document is subject to change withoutwithout notice. notice. Cree, the Cree logo andlogo, XLamp are registered trademarks registered trademarks of Cree, Inc. of Cree, Inc.
13
xlamp xm-l easywhite leds
Performance Groups – Brightness (TJ = 85 °C) XLamp XM-L EasyWhite LEDs are tested for luminous flux and placed into one the following bins.
Group Code
Min. Luminous Flux @ 700 mA, 6 V (@ 350 mA , 12 V)
Max. Luminous Flux @ 700 mA, 6 V (@ 350 mA, 12 V)
S6
180
200
T2
200
220
T3
220
240
T4
240
260
T5
260
280
T6
280
300
U2
300
320
U3
320
340
U4
340
360
U5
360
380
U6
380
400
V2
400
420
® ® ® Copyright © 2010 2011-2013 Cree,AllInc. All rights reserved. The information this document is subject to change Cree , the Cree XLamp and EasyWhite are Copyright © Cree, Inc. rights reserved. The information in this in document is subject to change withoutwithout notice. notice. Cree, the Cree logo andlogo, XLamp are registered trademarks registered trademarks of Cree, Inc. of Cree, Inc.
14
xlamp xm-l easywhite leds
Performance Groups – Chromaticity (TJ = 85 °C) XLamp XM-L EasyWhite LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates. EasyWhite Color Temperatures – 4-Step
EasyWhite Color Temperatures – 2-Step
Code
Code
50F
40F
35F
30F
27F
CCT
5000K
4000 K
3500 K
3000 K
2700 K
x
y
0.3407
0.3459
0.3415
0.3586
0.3499
0.3654
0.3484 0.3744
CCT
x
y
0.3429
0.3507
0.3434
0.3571
0.3475
0.3604
0.3521
0.3469
0.3539
0.3685
0.3784
0.3741
0.3782
0.3837
0.3804
0.3818
0.3912
0.3917
0.3867
0.3857
0.3863
0.3758
0.3844
0.3778
0.3981
0.3800
0.4030
0.3857
0.4040
0.3966
0.4061
0.3941
0.4186
0.4037
0.4132
0.3976
0.4116
0.3865
0.4099
0.3890
0.4242
0.3919
0.4291
0.3973
0.4322
0.4096
0.4333
0.4062
0.4449
0.4141
0.4395
0.4084
0.4359
0.3960
0.4351
0.3994
0.4475
0.3994
0.4528
0.4046
0.4573
0.4178
0.4578
0.4138
0.4695
0.4207
0.4638
0.4152
0.4589
0.4021
0.4586
0.4060
50H
5000K
40H
4000 K
35H
3500 K
30H
3000 K
27H
2700 K
ANSI White Bins Code
CCT
Bin Code
3A0
3B0
0E3
5000K
3C0
3D0
x
y
.3371
.3490
.3451
.3554
.3440
.3427
.3366
.3369
.3376
.3616
.3463
.3687
.3451
.3554
.3371
.3490
.3463
.3687
.3551
.3760
.3533
.3620
.3451
.3554
.3451
.3554
.3533
.3620
.3515
.3487
.3440
.3427
® ® ® Copyright © 2010 2011-2013 Cree,AllInc. All rights reserved. The information this document is subject to change Cree , the Cree XLamp and EasyWhite are Copyright © Cree, Inc. rights reserved. The information in this in document is subject to change withoutwithout notice. notice. Cree, the Cree logo andlogo, XLamp are registered trademarks registered trademarks of Cree, Inc. of Cree, Inc.
15
xlamp xm-l easywhite leds
Cree EasyWhite Bins Plotted on the 1931 CIE Color Space (TJ = 85 °C) 0.45
ANSI C78.377 Quadrangle EasyWhite 4-step EasyWhite 2-step
0.44
2700K
3000K
0.43
3500K
0.42
4000K
0.41
4500K
0.40
5000K
CCy
0.39
5700K
0.38 0.37 0.36 0.35
0.34 0.33
0.49
0.48
0.47
0.46
0.45
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.32
0.32
CCx
Cree ANSI White Bins Plotted on the 1931 CIE Color Space (Tj=85 °C) 0.45 0.44 2900K
2600K
3000K
0.43 3200K
0.42
3500K
6C0
4300K
0.39
4500K
5000K
5300K
0.38
6B0
7D0
8A0
6D0
5B0
6A0 5D0
0.37 0.36
ANSI C78.377A
5A0
3C0
8D0
7A0
5C0
4750K
8C0
7B0
4000K
0.40
8B0
7C0
3700K
0.41
CCy
2700K
3B0 3D0
0.35
3A0
0.34 0.33
0.49
0.48
0.47
0.46
0.45
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.32
0.32
CCx
® ® ® Copyright © 2010 2011-2013 Cree,AllInc. All rights reserved. The information this document is subject to change Cree , the Cree XLamp and EasyWhite are Copyright © Cree, Inc. rights reserved. The information in this in document is subject to change withoutwithout notice. notice. Cree, the Cree logo andlogo, XLamp are registered trademarks registered trademarks of Cree, Inc. of Cree, Inc.
16
xlamp xm-l easywhite leds
Bin and Order Code Format Bin codes and order codes are configured as follows: Order Code Bin Code Series XML = XM-L
Series XML = XM-L
Internal code
Internal code
Internal code
Flux bin
Kit code
Internal code
SSSCCC-BB-HHHH-NNNNNNNNN Vf class: B = 6-V class D = 12-V class
SSSCCC-B-WWW-FFF-GAAAAAA Vf class: B = 6-V class D = 12-V class
Reel size 0 = 1000 (standard)
Chromaticity bin
Color EZW = EasyWhite
Color EZW = EasyWhite
® ® ® Copyright © 2010 2011-2013 Cree,AllInc. All rights reserved. The information this document is subject to change Cree , the Cree XLamp and EasyWhite are Copyright © Cree, Inc. rights reserved. The information in this in document is subject to change withoutwithout notice. notice. Cree, the Cree logo andlogo, XLamp are registered trademarks registered trademarks of Cree, Inc. of Cree, Inc.
17
xlamp xm-l easywhite leds
Reflow Soldering Characteristics In testing, Cree has found XLamp XM-L LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
Profile Feature
Lead-Based Solder
Lead-Free Solder
3 °C/second max.
3 °C/second max.
Preheat: Temperature Min (Tsmin)
100 °C
150 °C
Preheat: Temperature Max (Tsmax)
150 °C
200 °C
60-120 seconds
60-180 seconds
183 °C
217 °C
60-150 seconds
60-150 seconds
215 °C
260 °C
10-30 seconds
20-40 seconds
6 °C/second max.
6 °C/second max.
6 minutes max.
8 minutes max.
Average Ramp-Up Rate (Tsmax to Tp)
Preheat: Time (tsmin to tsmax) Time Maintained Above: Temperature (TL) Time Maintained Above: Time (tL) Peak/Classification Temperature (Tp) Time Within 5 °C of Actual Peak Temperature (tp) Ramp-Down Rate Time 25 °C to Peak Temperature
Note: All temperatures refer to the topside of the package, measured on the package body surface.
® ® ® Copyright © 2010 2011-2013 Cree,AllInc. All rights reserved. The information this document is subject to change Cree , the Cree XLamp and EasyWhite are Copyright © Cree, Inc. rights reserved. The information in this in document is subject to change withoutwithout notice. notice. Cree, the Cree logo andlogo, XLamp are registered trademarks registered trademarks of Cree, Inc. of Cree, Inc.
18
xlamp xm-l easywhite leds
Notes Lumen Maintenance Projections Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document at www.cree.com/xlamp_app_notes/LM80_results. Please consult the XLamp Long-Term Lumen Maintenance application note at www.cree.com/xlamp_app_notes/lumen_ maintenance for more details on Cree’s lumen maintenance testing and forecasting. Please read the XLamp Thermal Management application note at www.cree.com/xlamp_app_notes/thermal_management for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature.
Moisture Sensitivity In testing, Cree has found XLamp XM-L LEDs to have unlimited floor life in conditions ≤30 ºC/85% relative humidity (RH). Moisture testing included a 168-hour soak at 85 ºC/85% RH followed by 3 reflow cycles, with visual and electrical inspections at each stage. Cree recommends keeping XLamp LEDs in their sealed moisture-barrier packaging until immediately prior to use. Cree also recommends returning any unused LEDs to the resealable moisture-barrier bag and closing the bag immediately after use.
RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Ecology section of www.cree.com.
REACh Compliance REACh substances of high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notices of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to insure you get the most up-to-date REACh Declaration. Historical REACh banned substance information (substances restricted or banned in the EU prior to 2010) is also available upon request.
UL Recognized Component Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/UL 8750.
Vision Advisory Claim WARNING. Do not look at exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the Cree LED Eye Safety application note at www.cree.com/xlamp_app_notes/led_eye_safety.
® ® ® Copyright © 2010 2011-2013 Cree,AllInc. All rights reserved. The information this document is subject to change Cree , the Cree XLamp and EasyWhite are Copyright © Cree, Inc. rights reserved. The information in this in document is subject to change withoutwithout notice. notice. Cree, the Cree logo andlogo, XLamp are registered trademarks registered trademarks of Cree, Inc. of Cree, Inc.
19
4.8 C
xlamp xm-l easywhite leds
2.26
Mechanical Dimensions 4.7 3.9
All measurements are ±.13 mm unless otherwise indicated.
6
6
5
B
4
NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND 6 CONFIDENTIAL INFORMATION OF CREE, INC. 5 THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY NOTICE 4.7 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC.
3 REV
4
3
2
B
REV
CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT OF CREE INC.
Anode
D
A
RECOMMENDED STENCIL PATTERN SHADED AREA IS OPEN
5.00
THIRD ANGLE PROJECTION
A
NEW RELEASE
B
ADDED CHIPS AND FLASH DIMENSION
C
REMOVED TRACES
D
ADDED SOLDERMASK
E
ADDED DOME RADIUS 3.8
D E
2.8
FOR SHEET METAL PARTS ONLY .X ± 1.5 .XX ± .75 .XXX ± .25 X° ± .5 °
3.8
3.02 DATE
DRAWN BY
D. CRONIN
0.73
DATE
--
--
3
A
OUTLINE DRAWING, 5050 XM 4 X 1000 WZ1000
SIZE
FINAL PROTECTIVE FINISH
--
Fax (919) 313-5558
TITLE
MATERIAL
--
0.5
Phone (919) 313-5300
--
APPROVED
0.5
4600 Silicon Drive Durham, N.C 27703
DATE
--
0.5
2.8
0.73
3.02
11/10/10
CHECK
SURFACE FINISH: 1.6
5.00
4
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX ± .25 .XXX ± .125 X° ± .5 °
ADDED
C
D
5.00
REVISONS
DESCRIPTION
SCALE
C
REV.
DRAWING NO.
2610-00012
E
SHEET
16.000
2
0.5
OF
1 /1
1
5.00
4.8
C C
R2.26 R2.26
Anode
Top View
4.8
4.8
0.5
0.5
4.7 3.9
4.7 3.9
3.8
3.8
Bottom View
Side View
0.6
0.6
B
B
0.5
0.5 0.4
0.4
A
RECOMMENDED PCB SOLDER PAD Recommended
4.7
0.4
0.4
2.8
4.7
0.4
4.8
0.4
0.5
2.8
A
0.4
4.8
0.5
0.4 UNLESS OTHERWISE SPECIFIED
PCB Solder Pad
RECOMMENDED STENCIL PATTERN DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. STENCIL PATTERN SHADED AREA ISRECOMMENDED OPEN Recommended Stencil Pattern
D. CRONIN
11/10/10
UNLESSDATE OTHERWISE SPECIFIED DIMENSIONS ARE IN --MILLIMETERS--AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: SHADED AREA IS OPEN .XX ± .25 DATE APPROVED TOLERANCE UNLESSTITLE SPECIFIED: .XXX ± .125 --- ± .XX .25 X° ± .5 ° THIRD ANGLE PROJECTION .XXX ± .125 FOR SHEET METAL PARTS ONLY MATERIAL X° ± .5 ° THIRD PROJECTION .X ANGLE ± 1.5 SIZE FOR SHEET METAL PARTS ONLY -.XX ± .75 .XXX ± .25 FINAL PROTECTIVE FINISH .X ± 1.5 X° ± .5 ° .XX ± .75 ± SCALE .25 16.000 SURFACE FINISH: 1.6 -- .XXX X° ± .5 °
(Shaded Area Is Open)
RECOMMENDED PCB SOLDER PAD
DATE
DRAWN BY
CHECK
5
6
4
5
3
4
D. CR
OUTLINE D 4X
C
6
DRAWN
CHECK
2 SURFACE FINISH: 1.6
3
® ® ® Copyright © 2010 2011-2013 Cree,AllInc. All rights reserved. The information this document is subject to change Cree , the Cree XLamp and EasyWhite are Copyright © Cree, Inc. rights reserved. The information in this in document is subject to change withoutwithout notice. notice. Cree, the Cree logo andlogo, XLamp are registered trademarks registered trademarks of Cree, Inc. of Cree, Inc.
20
APPROV
MATERIA
DRAWING
FINAL PRO
6
5
4
3
REVISIONS
4.00[.157]
DESCRIPTION
REV
BY
DATE
APP'D
POCKET SIZE
D
2.00[.079]
1
2
NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE INC.
Do1.50
P2
+.10 +.0039 .0591 -.00 -.0000 [ ] 1.75[.069] E1
Po
Tape and Reel
Ao -
5.40mm [.213"]
Bo -
5.40mm [.213"]
Ko -
3.35mm [.132"]
3.0°
xlamp xm-l easywhite leds D
5.40[.213] Bo
6 5 4 All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems3 Standard. 12.00[.472] 6 5 4 3
5.50[.217]F
C
NOMINAL
OF CREE INC.
D
D
10.25 [.404] E2
1.50[.059] 4.00[.157] D1 4.00[.157] Po
8.00[.315] P
REV
12.30 [.484] MAX W
2.00[.079] 2.00[.079] P2
2
REV
B 6
5
C
NOTICE TIAL. THIS PLOT AND THE INFORMATION HIN ARE THE PROPRIETARY AND NFORMATION OF CREE, INC. THIS PLOT PIED, REPRODUCED OR DISCLOSED TO ANY PERSON WITHOUTTHE WRITTEN CONSENT
A
Ao
B
3.0°
2
B
D
C
BY
DATE
DDS
11/8/10
DC
2/26/12
B
BS
MATERIAL
SIZE FINAL PROTECTIVE FINISH
Direction
6
6
2402-00011 7.0°
2
4
Leader 400mm (min.) of empty pockets with at least 100mm sealed by tape 5 pockets min.) (40 empty 5
A
SHEET
7.0°
OF
B
1
3
2
1
2400-00009
CREE REFERENCE DRAWING FOR TEK-PAK DRAWING 018275 CREE REFERENCE DRAWING FOR TEK-PAK DRAWING 018275
12
INDEX
QTY
ITEM
COMMENTS
1
1
2400-00009-CORE
DRAWN BY
C
DATE
UNLESS OTHERWISE SPECIFIED DATE DRAWN BY 2 SPECIFIED 2 D. CRONIN 2400-00009-REEL 4/23/10 UNLESS ARE OTHERWISE DIMENSIONS IN INCHES D. CRONIN 4/23/10 DATE DIMENSIONS ARE IN INCHESCHECK AND AFTER FINISH. CHECK DATE AND AFTERSPECIFIED: FINISH. TOLERANCE UNLESS TOLERANCE .XX ± UNLESS .01 SPECIFIED: APPROVED DATE TITLE ± .01 .XXX .XX ± .005 APPROVED DATE TITLE X° ±.XXX .5± ° .005 THIRD ANGLE PROJECTION MATERIAL X° PARTS ± .5 ° FOR SHEET METAL ONLY THIRD ANGLE PROJECTION MATERIAL FOR.XSHEET ± METAL .06 PARTS ONLY DRAWING NO. SIZE .XX .X ± ±.03 .06 DRAWING NO. SIZE FINAL PROTECTIVE FINISH ± .03 .XXX .XX ± .010 FINAL PROTECTIVE FINISH X° ±.XXX .5± ° .010 SCALE X° ± .5 ° SURFACE FINISH: 63 SCALE DRAWING SCALE SURFACE FINISH: 63 DRAWING SCALE
4600 Silicon Drive Durham, N.C 27703 4600 Silicon Drive Durham, N.C 27703 Phone (919) 313-5300 Phone (919) 313-5300 Fax (919) 313-5558 Fax (919) 313-5558
XMXM 5050 CARRIER TAPE 5050 CARRIER TAPE D 2402-00011 A 2402-00011 A
A
4
3
4
2
3
2
SHEET
OF
SHEET
1
1OF / 1
1
12.4 +.2 .0 MEASURED AT HUB
C
330 +.25 -.75
16.4 +0.2 .0 MEASURED AT HUB
THIRD ANGLE PROJECTION
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX ± .25 .XXX ± .125 X° ± .5 ° FOR SHEET METAL PARTS ONLY .X ± 1.5 .XX ± .75 .XXX ± .25 X° ± .5 ° SURFACE FINISH:
5
4
1.6
3
1.9±.4
DATE
DRAWN BY
D. CRONIN CHECK
21 ±.4
4600 Silicon Drive Durham, N.C 27703
06/08/10 DATE
--
Phone (919) 313-5300
--
Fax (919) 313-5558
A
DATE
APPROVED
--
--
MATERIAL
--
TITLE
13.1 ±.2 SIZE
FINAL PROTECTIVE FINISH
--
SCALE
XM LOADING SPEC REV.
DRAWING NO.
C
2402-00012 SHEET
3.000
2
B OF
B
1 /1
1
12.4 +1.0 -.5 MEASURED AT EDGE 60°
60°
REVISONS REV BY DATE® APP'D DESCRIPTION ® ® Copyright © 2010 2011-2013 Cree,AllInc. All rights reserved. The information this document is subject to change Cree , the Cree XLamp and EasyWhite are Copyright © Cree, Inc. rights reserved. The information in this in document is subject to change withoutwithout notice. notice. Cree, the Cree logo andlogo, XLamp are registered trademarks registered trademarks of Cree, Inc. of Cree, Inc.
A
THIRD ANGLE PROJECTION
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX ± .01 .XXX ± .005 X° ± .5 °
FOR SHEET METAL PARTS ONLY
DRAWN BY
D. CRONIN CHECK
DATE
4600 Silicon Drive Durham, N.C 27703
09/29/09 DATE
-APPROVED
-MATERIAL
21
Phone (919) 313-5300
--
Fax (919) 313-5558
DATE
--
A
REV.
B
C
B
1 /1
3.35 1.75 3.35[.132] 3.35[.132] Ko Ko
START
Ao
REV.
DRAWING NO.
DRAWING SCALE
ANODE SIDE A
A
SCALE
D .36[.014] T .36[.014] T
A
XM 5050 CARRIER TAPE
5.40[.213] 5.40[.213] Ao
Loaded Pockets (1000 Lamps)
1.50[.059] Phone (919) 313-5300 Fax (919) 313-5558 D1 1.50[.059] D1
8.00[.315] DATE 8.00[.315] P TITLE P
CATHODE SIDE 4
5
4600 Silicon Drive Durham, N.C 27703
4/23/10 DATE
APPROVED
FOR SHEET METAL PARTS ONLY .X ± .06 .XX ± .03 .XXX ± .010 X° ± .5 °
8 6
D. CRONIN CHECK
3
A
B
C
APP'D
DATE
DRAWN BY
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX ± .01 .XXX ± .005 X° ± .5 °
NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTANED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE INC.
6
D
5.40[.213] 5.40[.213] Bo Bo
3.0°
1
DESCRIPTION
A
4
Trailer 160mm (min) of empty pockets sealed with tape (15 pockets min.)
12.00[.472] 12.00[.472] NOMINAL REVISONS NOMINAL
10.25 12.30 [.484] 12.30 [.484] 10.25 Loaded pocket count was 750 MAX [.404] [.404] W MAX MADE CATHODE AND ANODE NOTE LARGER E2 W E2
REV
63 SURFACE FINISH: User Feed
5
D
5.50[.217]F 5.50[.217]F
APP'D DATE APP'D
CREE REFERENCE DRAWING FOR TEK-PAK DRAWING 018275
THIRD ANGLE PROJECTION
END
3
3.35[.132] Ko
5.40[.213]
6
4
C
1 DATE
All dimensions in mm.
B
7.0°
BY
BoBo - - 5.40mm [.213"] 5.40mm [.213"] KoKo - - 3.35mm [.132"] 3.35mm [.132"]
1.75[.069] E1 1.75[.069] E1
.36[.014] T
Po
BY
POCKET SIZE POCKET SIZE AoAo - - 5.40mm [.213"] 5.40mm [.213"]
+.10 +.0039 Do1.50 .0591 +.0039 -.00 +.10 .0591 -.0000 [] Do1.50 -.00 -.0000 [ ]
P2
1
2
REVISIONS REVISIONS DESCRIPTION DESCRIPTION
C
NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION NOTICE CONTAINED WITHIN ARE THETHIS PROPRIETARY ANDINFORMATION CREE CONFIDENTIAL. PLOT AND THE CONFIDENTIAL INFORMATION CREE, INC. THIS PLOT CONTAINED WITHIN AREOF THE PROPRIETARY AND MAY NOT BE COPIED, INFORMATION REPRODUCEDOF ORCREE, DISCLOSED TO PLOT ANY CONFIDENTIAL INC. THIS UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY OF CREE INC. UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT
TITLE
REEL, 13" X 12MM, 3 PIECE SNAP
A
REV.
A
1 /1
A
xlamp xm-l easywhite leds
Humidity Indicator Card (inside bag)
Packaging
Dessicant (inside bag)
Unpackaged Reel
Label with Cree Bin Code, Qty, Reel ID Packaged Reel
Label with Cree Bin Code, Qty, Lot #
Vacuum-Sealed Moisture Barrier Bag Label with Cree Order Code, Qty, Reel ID, PO #
Label with Cree Bin Code, Qty, Reel ID
Label with Custo Code, Qty, Reel I
Boxed Reel
Label with Cree Order Code, Qty, Reel ID, PO #
Patent Label
Label with Cree Bin Code, Qty, Reel ID
Patent Label
® ® ® Copyright © 2010 2011-2013 Cree,AllInc. All rights reserved. The information this document is subject to change Cree , the Cree XLamp and EasyWhite are Copyright © Cree, Inc. rights reserved. The information in this in document is subject to change withoutwithout notice. notice. Cree, the Cree logo andlogo, XLamp are registered trademarks registered trademarks of Cree, Inc. of Cree, Inc.
22
