CLD-DS33 Rev 6
Product family data sheet
Cree® XLamp® XM-L LEDs
Product Description The
XLamp
industry’s
XM-L
highest
LED
is
FEATURES the
performance,
single-die white lighting-class LED. The XLamp XM-L is 20% more efficient than the XLamp XP-G at the same current, and can deliver
• Maximum drive current: 3000 mA • Low thermal resistance: 2.5 °C/W • Maximum junction temperature: 150 °C
1000 lumens with 100 lumens per
• Viewing angle: 125°
watt efficacy. The XLamp XM-L
• Available in cool white, 80-CRI
LED offers Cree’s industry-leading
minimum neutral white and 80-
features:
CRI, 85-CRI and 90-CRI warm
wide
symmetrical
viewing
package,
angle,
unlimited
floor life and electrically neutral thermal path.
white • ANSI-compatible chromaticity bins • Unlimited floor life at
XLamp
XM-L
LEDs
can
enable
LED light into new applications
• Reflow solderable -
that require tens of thousands of
JEDEC J-STD-020C
lumens, such as high bay and high-
• Electrically neutral thermal path
output area lighting. The XM-L is
• RoHS- and REACh-compliant
also the ideal choice for lighting
• UL-recognized component
applications where high light output and maximum efficacy are required, WWW.CREE.COM/XLAMP
≤ 30 ºC/85% RH
such as LED light bulbs, outdoor
(E349212)
TABLE OF CONTENTS Flux Characteristics..................... 2 Characteristics........................... 3 Relative Spectral Power Distribution............................... 3 Relative Flux vs. Junction Temperature.............................. 4 Electrical Characteristics.............. 4 Thermal Design.......................... 5 Relative Flux vs. Current............. 5 Relative Chromaticity vs. Current (Cool White).............................. 6 Relative Chromaticity vs. Temperature (Cool White)............ 6 Relative Chromaticity vs. Current (Warm White)............................ 7 Relative Chromaticity vs. Temperature (Warm White).......... 7 Typical Spatial Distribution........... 8 Reflow Soldering Characteristics... 9 Notes.......................................10 Mechanical Dimensions..............11 Tape and Reel...........................12 Packaging.................................13
lighting, portable lighting, indoor lighting and solar-powered lighting.
Copyright © 2010-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp
xlamp xm-l leds
Flux Characteristics (TJ = 25 °C) The following table provides several base order codes for XLamp XM-L LEDs. It is important to note that the base order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the order-code nomenclature, please consult the XLamp XM-L Binning and Labeling document.
Color
CCT Range Min.
Cool White
5000 K
Max.
8300 K
Neutral White
3700 K
5000 K
80-CRI White
2600 K
4300 K
Warm White
2600 K
3700 K
85-CRI White
90-CRI White
2600 K
2600 K
Base Order Codes Min. Luminous Flux @ 700 mA
3200 K
3200 K
Calculated Minimum Luminous Flux (lm)*
Order Code
Group
Flux (lm)
1000 mA
1500 mA
2000 mA
T5
260
360
511
643
XMLAWT-00-0000-0000T5051
T6
280
388
551
692
XMLAWT-00-0000-0000T6051
U2
300
416
590
742
XMLAWT-00-0000-0000U2051
T4
240
332
472
593
XMLAWT-00-0000-000LT40E4
T5
260
360
511
643
XMLAWT-00-0000-000LT50F4
T2
200
277
393
494
XMLAWT-00-0000-000HT20E7
T3
220
305
433
544
XMLAWT-00-0000-000HT30F7
T2
200
277
393
494
XMLAWT-00-0000-000LT20E7
T3
220
305
433
544
XMLAWT-00-0000-000LT30F7
S4
164
227
323
406
XMLAWT-00-0000-000PS40E7
S5
172
238
338
425
XMLAWT-00-0000-000PS50E7
S6
182
252
358
450
XMLAWT-00-0000-000PS60E7
S4
164
227
323
406
XMLAWT-00-0000-000US40E7
S5
172
238
338
425
XMLAWT-00-0000-000US50E7
S6
182
252
358
450
XMLAWT-00-0000-000US60E7
Notes: •
Cree maintains a tolerance of ± 7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ± 2 on CRI measurements.
•
Typical CRI for Cool White (5000 K – 8300 K CCT) is 65.
•
Typical CRI for Neutral White (3700 K – 5000 K CCT) is 75.
•
Typical CRI for Warm White (2600 K – 3700 K CCT) is 80.
•
Minimum CRI for 80-CRI White is 80.
•
Minimum CRI for 85-CRI White is 85.
•
Minimum CRI for 90-CRI White is 90.
*
Calculated flux values are for reference only.
® ® Copyright © 2010 2010-2012 Cree, All reserved. rights reserved. The information in this document is to subject to without change notice. withoutCree, notice. , logo the Cree logo and aretrademarks registered Cree, Inc. AllInc. rights The information in this document is subject change theCree Cree and XLamp areXLamp registered trademarks of Cree, Inc.of Cree, Inc.
2
xlamp xm-l leds
Characteristics Characteristics
Unit
Thermal Resistance, junction to solder point
°C/W
Viewing Angle (FWHM) Temperature coefficient of voltage
Minimum
Typical
Maximum
2.5
degrees
125
mV/°C
-3.0
ESD Classification (HBM per Mil-Std-883D)
Class 2
DC Forward Current
mA
3000
Reverse Voltage
V
5
Forward voltage (@ 700 mA)
V
2.9
Forward voltage (@ 1500 mA)
V
3.1
Forward voltage (@ 3000 mA)
V
3.35
LED Junction Temperature
°C
3.5
150
Relative Spectral Power Distribution
Relative Radiant Power (%)
100 Relative Spectral Power
80
60
2600K -3700K CCT 3700K - 5000K CCT 5000K - 8300K CCT
40
20
0 400
450
500
550
600
650
700
750
Wavelength (nm)
® ® Copyright © 2010 2010-2012 Cree, All reserved. rights reserved. The information in this document is to subject to without change notice. withoutCree, notice. , logo the Cree logo and aretrademarks registered Cree, Inc. AllInc. rights The information in this document is subject change theCree Cree and XLamp areXLamp registered trademarks of Cree, Inc.of Cree, Inc.
3
xlamp xm-l leds
Relative Flux vs. Junction Temperature (IF = 700 mA) 100%
Relative Luminous Flux
90% 80% 70% 60% 50% 40% 30% 20% 10% 0% 25
50
75
100
125
150
Junction Temperature (ºC)
Electrical Characteristics (Tj = 25ºC) (TJ = 25 °C) Electrical Characteristics 3000 2800 2600
Forward Current (mA)
2400 2200 2000 1800 1600 1400 1200 1000 800 600 400 200
0 2.00
2.20
2.40
2.60
2.80
3.00
3.20
3.40
3.60
Forward Voltage (V)
® ® Copyright © 2010 2010-2012 Cree, All reserved. rights reserved. The information in this document is to subject to without change notice. withoutCree, notice. , logo the Cree logo and aretrademarks registered Cree, Inc. AllInc. rights The information in this document is subject change theCree Cree and XLamp areXLamp registered trademarks of Cree, Inc.of Cree, Inc.
4
xlamp xm-l leds
Thermal Design The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to Cool White ambient in order to optimize lamp life and optical characteristics. 3500
Maximum Current (mA)
3000 2500 2000 1500
Thermal Design 1000
Rj-a = 7°C/W Rj-a = 10°C/W
500 0
Rj-a = 4°C/W
Rj-a = 15°C/W 0
20
40
60
80
100
120
140
Ambient Temperature (ºC)
Relative Flux vs. Current (TJ = 25 °C) 350%
Relative Luminous Flux (%)
325% 300% 275% 250%
225% 200% 175% 150% 125% 100%
75% Typical Spatial Radiation Pattern 50%
25% 0%
0
200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000
Forward Current (mA) ® ® Copyright © 2010 2010-2012 Cree, All reserved. rights reserved. The information in this document is to subject to without change notice. withoutCree, notice. , logo the Cree logo and aretrademarks registered Cree, Inc. AllInc. rights The information in this document is subject change theCree Cree and XLamp areXLamp registered trademarks of Cree, Inc.of Cree, Inc.
5
xlamp xm-l leds
Relative Chromaticity vs. Current (Cool White)
Cool White 0.020 0.015 0.010
0.005 0.000 ΔCCx
-0.005
ΔCCy
-0.010
-0.015 -0.020 0
500
1000
1500
2000
2500
3000
Current (mA)
Warm White Relative Chromaticity vs. Temperature (Cool White) 0.020
0.015
Cool White 0.010 0.020 0.005 0.015 0.000 0.010 -0.005 0.005 -0.010 0.000 -0.015 -0.005 -0.020 -0.010 -0.015
ΔCCx ΔCCy ΔCCx ΔCCy
0
500
1000
1500
2000
2500
3000
Current (mA)
-0.020
25
50
75
100
125
150
Tsp (°C)
Warm White 0.020 ® ® Copyright © 2010 2010-2012 Cree, All reserved. rights reserved. The information in this document is to subject to without change notice. withoutCree, notice. , logo the Cree logo and aretrademarks registered Cree, Inc. AllInc. rights The information in this document is subject change theCree Cree and XLamp areXLamp registered trademarks of Cree, Inc.of Cree, Inc.
0.015
0.010 0.005
6
ΔCCx
-0.005
ΔCCy
-0.010
-0.015 xlamp xm-l leds
-0.020 0
500
1000
1500
2000
2500
3000
Current (mA)
Relative Chromaticity vs. Current (Warm White)
Warm White 0.020 0.015
Cool White 0.010 0.020 0.005
0.015 0.000 0.010 -0.005 0.005 -0.010 0.000 -0.015 -0.005 -0.020 -0.010 -0.015
ΔCCx ΔCCy ΔCCx ΔCCy
0
500
1000
1500
2000
2500
3000
Current (mA)
-0.020
25
50
75
100
125
150
Tsp (°C) Relative Chromaticity vs. Temperature (Warm White)
Warm White 0.020 0.015
0.010 0.005
0.000 ΔCCx
-0.005
ΔCCy
-0.010 -0.015
-0.020 25
50
75
100
125
150
Tsp (°C)
® ® Copyright © 2010 2010-2012 Cree, All reserved. rights reserved. The information in this document is to subject to without change notice. withoutCree, notice. , logo the Cree logo and aretrademarks registered Cree, Inc. AllInc. rights The information in this document is subject change theCree Cree and XLamp areXLamp registered trademarks of Cree, Inc.of Cree, Inc.
7
xlamp xm-l leds
Typical Spatial Distribution
Relative Luminous Intensity (%)
120
100
80
60
40
20
0 -100
-80
-60
-40
-20
0
20
40
60
80
100
Angle (º)
® ® Copyright © 2010 2010-2012 Cree, All reserved. rights reserved. The information in this document is to subject to without change notice. withoutCree, notice. , logo the Cree logo and aretrademarks registered Cree, Inc. AllInc. rights The information in this document is subject change theCree Cree and XLamp areXLamp registered trademarks of Cree, Inc.of Cree, Inc.
8
xlamp xm-l leds
Reflow Soldering Characteristics In testing, Cree has found XLamp XM-L LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
Profile Feature
Lead-Based Solder
Lead-Free Solder
3 °C/second max.
3 °C/second max.
Preheat: Temperature Min (Tsmin)
100 °C
150 °C
Preheat: Temperature Max (Tsmax)
150 °C
200 °C
60-120 seconds
60-180 seconds
183 °C
217 °C
60-150 seconds
60-150 seconds
215 °C
260 °C
10-30 seconds
20-40 seconds
6 °C/second max.
6 °C/second max.
6 minutes max.
8 minutes max.
Average Ramp-Up Rate (Tsmax to Tp)
Preheat: Time (tsmin to tsmax) Time Maintained Above: Temperature (TL) Time Maintained Above: Time (tL) Peak/Classification Temperature (Tp) Time Within 5 °C of Actual Peak Temperature (tp) Ramp-Down Rate Time 25 °C to Peak Temperature
Note: All temperatures refer to the topside of the package, measured on the package body surface.
® ® Copyright © 2010 2010-2012 Cree, All reserved. rights reserved. The information in this document is to subject to without change notice. withoutCree, notice. , logo the Cree logo and aretrademarks registered Cree, Inc. AllInc. rights The information in this document is subject change theCree Cree and XLamp areXLamp registered trademarks of Cree, Inc.of Cree, Inc.
9
xlamp xm-l leds
Notes Lumen Maintenance Projections Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document at www.cree.com/xlamp_app_notes/LM80_results. Cree currently recommends a maximum drive current of 2000 mA for XLamp XM-L white LEDs in designs seeking the ENERGY STAR* 35,000-hour lifetime rating (≥ 94.1% luminous flux @ 6000 hours) or 25,000-hour lifetime rating (≥ 91.8% luminous flux @ 6000 hours). Please read the XLamp Long-Term Lumen Maintenance application note at www.cree.com/xlamp_app_notes/XRE_ lumen_maintenance for more details on Cree’s lumen maintenance testing and forecasting. Please read the XLamp Thermal Management application note at www.cree.com/xlamp_app_notes/thermal_management for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature. * These lifetime ratings are based on the current ENERGY STAR Product Specification for Luminaires (Light Fixtures) V1.0 (February 16, 2011) and ENERGY STAR Program Requirements for Integral LED Lamps V1.4 (May 13, 2011) lumen maintenance criteria.
Moisture Sensitivity In testing, Cree has found XLamp XM-L LEDs to have unlimited floor life in conditions ≤30 ºC/85% relative humidity (RH). Moisture testing included a 168-hour soak at 85 ºC/85% RH followed by 3 reflow cycles, with visual and electrical inspections at each stage. Cree recommends keeping XLamp LEDs in their sealed moisture-barrier packaging until immediately prior to use. Cree also recommends returning any unused LEDS to the resealable moisture-barrier bag and closing the bag immediately after use.
RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006.
UL Recognized Component Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/UL 8750.
Vision Advisory Claim WARNING: Do not look at exposed lamp in operation. Eye injury can result. See the LED Eye Safety aplication note at www.cree.com/xlamp_app_notes/led_eye_safety. ® ® Copyright © 2010 2010-2012 Cree, All reserved. rights reserved. The information in this document is to subject to without change notice. withoutCree, notice. , logo the Cree logo and aretrademarks registered Cree, Inc. AllInc. rights The information in this document is subject change theCree Cree and XLamp areXLamp registered trademarks of Cree, Inc.of Cree, Inc.
10
4.8
C
xlamp xm-l leds
Mechanical Dimensions All measurements are ±.13 mm unless otherwise indicated.
4.7 3.9 0.6
B
6
5
4
6 NOTICE 4.7 CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION NOTICE CONTAINED WITHIN ARE THE PROPRIETARY AND CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY AND MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT UNAUTHORIZED PERSON WITHOUT THENOT WRITTEN CONSENT MAY BE COPIED, REPRODUCED OR DISCLOSED TO ANY OF CREE INC. UNAUTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT OF CREE INC.
0.4
3
5
2
4
1
3
Anode
2
REVISONS
REV
BY
DESCRIPTION REV
A B
B ADDED DIMENSION FOR TOP OF FLASH C ADDED DIMENSION FOR 1/5/11T DC 3.02 WAS 3.09
C D
D
0.4
DATE
DESCRIPTION 4/15/10 DC NEW 10/22/1 DDS RELEAS Added die outli 11/18/1 DC
NEW RELEASE A Added die outline
3.02 WAS 3.0
D D
3.8
0.4 RECOMMENDED STENCIL PATTERN SHADED AREA IS OPEN
5.00
THIRD ANGLE PROJECTION
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: 5.00 .XX ± .25 .XXX ± .125 X° ± .5 ° FOR SHEET METAL PARTS ONLY .X ± 1.5 .XX ± .75 .XXX ± .25 X° ± .5 °
DATE
DRAWN BY
D. CRONIN
DATE
--
--
--
5.00
0.5
Fax (919) 313-5558
A
OUTLINE DRAWING, 5050 XM
MATERIAL
--
SIZE
FINAL PROTECTIVE FINISH
--
3
0.73
TITLE
--
SCALE
C
2610-00009 SHEET
16.000
0.73
0.5 0.5
REV.
DRAWING NO.
2
2.8
0.5
Phone (919) 313-5300
DATE
APPROVED
SURFACE FINISH: 1.6
4
3.02
4600 Silicon Drive Durham, N.C 27703
04/9/10
CHECK
3.8
2.8
3.02
D OF
1 /1
1
4.8
5.00
Anode
C C
Top View 4.8
4.7 3.9
4.8
3.8
3.8
0.5
Bottom View
Side View
0.5
0.6
4.7 3.9 0.6
B B
0.5
4.8
0.5
0.5
2.782
0.4
4.7
0.4
0.4
0.4
0.4
A
4.7
0.4
4.8
0.4
0.5
2.782
0.4
UNLESS OTHERWISE SPECIFIED
A
RECOMMENDED PCB SOLDER PAD Recommended Solder RECOMMENDED PCB PCB SOLDER PAD
RECOMMENDED STENCIL PATTERN DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. RECOMMENDED STENCIL PATTERN SHADED AREA IS OPEN SPECIFIED: SHADED AREA IS TOLERANCE OPEN .XXUNLESS ± .25
DATE
DRAWN BY
D. CRONIN 04/9/10 UNLESS OTHERWISE SPECIFIED DATE DIMENSIONS ARE IN -- MILLIMETERS--AND AFTER FINISH. DATE UNLESS SPECIFIED: APPROVED TOLERANCE TITLE .XXX ± .125 .XX .25 --- ± X° ± .5 ° .XXX ± .125 MATERIAL FOR SHEET METAL PARTS ONLY X° ± .5 ° THIRD ANGLE PROJECTION .X ± 1.5 FOR SHEET METAL PARTS ONLY SIZE .XX ± .75 .X ± 1.5 .XXX ± .25 FINAL PROTECTIVE FINISH .XX ± .75 X° ± .5 ° .XXX ± .25 SCALE X° ± .5 ° 16.000 SURFACE FINISH: 1.6
Pad
CHECK
Recommended Stencil Pattern (Shaded Area Is Open) THIRD ANGLE PROJECTION
--
5 6
4 5
--
460 Du
04/9/10Ph DATE
Fa
-DATE
APPROVED
C
MATERIAL DRAWING NO.
2610-0000 --
FINAL PROTECTIVE FINISH
--
SURFACE FINISH: 1.6 2
3 4
D. CRONIN
OUTLINE --DRAWING, --
--
6
DATE
DRAWN BY
CHECK
3
2
® ® Copyright © 2010 2010-2012 Cree, All reserved. rights reserved. The information in this document is to subject to without change notice. withoutCree, notice. , logo the Cree logo and aretrademarks registered Cree, Inc. AllInc. rights The information in this document is subject change theCree Cree and XLamp areXLamp registered trademarks of Cree, Inc.of Cree, Inc.
11
SHE
1
6
5
4
3
2.00[.079]
4.00[.157]
1
2 REVISIONS
NOTICE EE CONFIDENTIAL. THIS PLOT AND THE INFORMATION NTAINED WITHIN ARE THE PROPRIETARY AND NFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT Y NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY AUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT CREE INC.
DESCRIPTION
REV
BY
DATE
APP'D
POCKET SIZE +.10 +.0039 .0591 -.00 -.0000 [ ]
Do1.50
P2
1.75[.069] E1
Po
Ao -
5.40mm [.213"]
Bo -
5.40mm [.213"]
Ko -
3.35mm [.132"]
xlamp xm-l leds D
Tape and Reel 3.0°
5.40[.213] Bo
3 12.00[.472] All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard. 6 5 4 3
5.50[.217]F
6
5
4
NOMINAL
OF CREE INC.
D
D
2.00[.079] 2.00[.079] P2 1.50[.059] 4.00[.157] D1 4.00[.157] Po
8.00[.315] P
REV
12.30 [.484] MAX W
10.25 [.404] E2
2
REV
6
5
C
NOTICE NTIAL. THIS PLOT AND THE INFORMATION THIN ARE THE PROPRIETARY AND INFORMATION OF CREE, INC. THIS PLOT OPIED, REPRODUCED OR DISCLOSED TO ANY D PERSON WITHOUTTHE WRITTEN CONSENT
5.40[.213]
4
3.0°
A B
Ao
B
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX ± .01 .XXX ± .005 X° ± .5 ° FOR SHEET METAL PARTS ONLY .X ± .06 .XX ± .03 .XXX ± .010 X° ± .5 ° SURFACE FINISH:
5
1
C
BY
DATE
DDS
11/8/10
DC
2/26/12
4
8 6
BS
A
Loaded Pockets (1000 Lamps)
1.50[.059] Phone (919) 313-5300 Fax (919) 313-5558 D1 1.50[.059] D1
8.00[.315] DATE 8.00[.315] P TITLE P
APPROVED
SIZE
A
FINAL PROTECTIVE FINISH
User Feed Direction
REV.
DRAWING NO.
2402-00011 7.0°
SCALE
DRAWING SCALE 2
SHEET
7.0°
1
A OF
4 1.75 3.35[.132] 3.35[.132] 3 Ko Ko
START
12
.36[.014] D T .36[.014] T
A
XM 5050 CARRIER TAPE
MATERIAL
5.40[.213] 5.40[.213] Ao
ANODE SIDE
4600 Silicon Drive Durham, N.C 27703
4/23/10 DATE
CATHODE SIDE 4
5
Trailer 160mm (min) of empty pockets sealed with tape (15 pockets min.)
D. CRONIN CHECK
3
A
B
3.35 2
1
2400-00009
CREE REFERENCE DRAWING FOR TEK-PAK DRAWING 018275 CREE REFERENCE DRAWING FOR TEK-PAK DRAWING 018275 INDEX
QTY
ITEM
1
1
2400-00009-CORE
DRAWN BY
COMMENTS
DATE
UNLESS OTHERWISE SPECIFIED DATE 4/23/10 2 D. CRONIN 2DRAWN BY2400-00009-REEL UNLESS ARE OTHERWISE SPECIFIED DIMENSIONS IN INCHES D. CRONIN 4/23/10 DATE DIMENSIONS ARE IN INCHESCHECK AND AFTER FINISH. CHECK DATE AND AFTERSPECIFIED: FINISH. TOLERANCE UNLESS TOLERANCE .XX ± UNLESS .01 SPECIFIED: APPROVED DATE TITLE .XX ± .01 .XXX ± .005 APPROVED DATE TITLE X° ±.XXX .5± ° .005 THIRD ANGLE PROJECTION MATERIAL X° PARTS ± .5 ° FOR SHEET METAL ONLY Leader THIRD ANGLE PROJECTION MATERIAL FOR.XSHEET ± METAL .06 PARTS ONLY DRAWING NO. 400mm (min.) of SIZE .XX .X ± ±.03 .06 DRAWING NO. SIZE FINAL PROTECTIVE FINISH ± .03 empty pockets with .XXX .XX ± .010 FINAL PROTECTIVE FINISH X° ±.XXX .5± ° .010 at least 100mm SCALE X° ± .5 ° SURFACE FINISH: 63 SCALE sealed by tape DRAWING SCALE SURFACE FINISH: 63 DRAWING SCALE
Ao
C 4600 Silicon Drive Durham, N.C 27703 4600 Silicon Drive Durham, N.C 27703 Phone (919) 313-5300 Phone (919) 313-5300 Fax (919) 313-5558 Fax (919) 313-5558
XMXM 5050 CARRIER TAPE 5050 CARRIER TAPE 2402-00011 A 2402-00011 A
6
(405 empty pockets min.)
4
5
3
4
2
3
A
REV.
A
6
SHEET
OF
SHEET
1
2
1OF / 1
1
D
REV.
A
1 /1
12.4 +.2 .0 MEASURED AT HUB
C
C
330 +.25 -.75
16.4 +0.2 .0 MEASURED AT HUB
THIRD ANGLE PROJECTION
B
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX ± .25 .XXX ± .125 X° ± .5 ° FOR SHEET METAL PARTS ONLY .X ± 1.5 .XX ± .75 .XXX ± .25 X° ± .5 ° SURFACE FINISH:
5
4
1.6
3
1.9±.4
DATE
DRAWN BY
D. CRONIN CHECK
21 ±.4
4600 Silicon Drive Durham, N.C 27703
06/08/10 DATE
--
Phone (919) 313-5300
--
Fax (919) 313-5558
A
DATE
APPROVED
--
--
MATERIAL
TITLE
13.1 ±.2
--
SIZE
FINAL PROTECTIVE FINISH
--
SCALE
XM LOADING SPEC REV.
DRAWING NO.
C
2402-00012 SHEET
3.000
2
B OF
B
1 /1
1
12.4 +1.0 -.5 MEASURED AT EDGE 60°
60°
REVISONS REV
DESCRIPTION
BY
DATE
APP'D
® ® Copyright © 2010 2010-2012 Cree, All reserved. rights reserved. The information in this document is to subject to without change notice. withoutCree, notice. , logo the Cree logo and aretrademarks registered Cree, Inc. AllInc. rights The information in this document is subject change theCree Cree and XLamp areXLamp registered trademarks of Cree, Inc.of Cree, Inc. UNLESS OTHERWISE SPECIFIED DRAWN BY
A
THIRD ANGLE PROJECTION
B
1 /1
B
6
C
APP'D
DATE
DRAWN BY
63
NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTANED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE INC.
D
D
CREE REFERENCE DRAWING FOR TEK-PAK DRAWING 018275
B
END
2
D
5.40[.213] 5.40[.213] Bo Bo
3.0°
12.00[.472] 12.00[.472] NOMINAL NOMINAL REVISONS
[.484] 10.25 12.30DESCRIPTION 12.30 [.484] MAX Loaded pocket count was 750 [.404]10.25 MAX [.404] WANODE E2 MADE CATHODE AND W NOTE LARGER E2
REV
3.35[.132] Ko
THIRD ANGLE PROJECTION
6
5.50[.217]F 5.50[.217]F
3
C
APP'D DATE APP'D
All dimensions in mm.
B
7.0°
BY
1 DATE
BoBo - - 5.40mm [.213"] 5.40mm [.213"] KoKo - - 3.35mm [.132"] 3.35mm [.132"]
1.75[.069] E1 1.75[.069] E1
.36[.014] T
Po
BY
POCKET SIZE POCKET SIZE AoAo - - 5.40mm [.213"] 5.40mm [.213"]
+.10 +.0039 Do1.50 .0591 +.0039 -.00 +.10 .0591 -.0000 [] Do1.50 -.00 -.0000 [ ]
P2
1
2
REVISIONS REVISIONS DESCRIPTION DESCRIPTION
C
NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION NOTICE CONTAINED WITHIN ARE THETHIS PROPRIETARY ANDINFORMATION CREE CONFIDENTIAL. PLOT AND THE CONFIDENTIAL INFORMATION CREE, INC. THIS PLOT CONTAINED WITHIN AREOF THE PROPRIETARY AND MAY NOT BE COPIED, INFORMATION REPRODUCEDOF ORCREE, DISCLOSED TO PLOT ANY CONFIDENTIAL INC. THIS UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY OF CREE INC. UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT
DIMENSIONS ARE IN INCHES AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX ± .01 .XXX ± .005 X° ± .5 °
FOR SHEET METAL PARTS ONLY
D. CRONIN
CHECK
DATE
4600 Silicon Drive Durham, N.C 27703
09/29/09
DATE
-APPROVED
-MATERIAL
12
Phone (919) 313-5300
--
Fax (919) 313-5558
DATE
--
TITLE
REEL, 13" X 12MM, 3 PIECE SNAP
A
A
xlamp xm-l leds
Humidity Indicator Card (inside bag)
Packaging
Dessicant (inside bag)
Unpackaged Reel
Label with Cree Bin Code, Qty, Reel ID Packaged Reel
Label with Cree Bin Code, Qty, Lot #
Vacuum-Sealed Moisture Barrier Bag Label with Cree Order Code, Qty, Reel ID, PO #
Label with Cree Bin Code, Qty, Reel ID
Label with Custo Code, Qty, Reel I
Boxed Reel
Label with Cree Order Code, Qty, Reel ID, PO #
Patent Label
Label with Cree Bin Code, Qty, Reel ID
Patent Label
® ® Copyright © 2010 2010-2012 Cree, All reserved. rights reserved. The information in this document is to subject to without change notice. withoutCree, notice. , logo the Cree logo and aretrademarks registered Cree, Inc. AllInc. rights The information in this document is subject change theCree Cree and XLamp areXLamp registered trademarks of Cree, Inc.of Cree, Inc.
13