Measuring
Ammonia
ATP (Adenosine Triphosphate)
Chloramine (Monochloramine)
Chlorine/Free Chlorine
COD/BOD/TOC/DOC/SAC
Conductivity
Dissolved Oxygen
Flow
Level
Manganese
Nitrate/Nitrite
Ortho-Phosphate
pH/ORP (Redox)
Salinity
Sludge Blanket
Suspended Solids
TDS
Turbidity
UV Transmittance
Royce Water Technologies
Product Catalogue Australian water & wastewater solutions
Innovative Technologies
Algae Control in ponds and lakes
Automatic Water & Wastewater Samplers
Biomass active liquid stimulant
Calibration of Temperature, Pressure & Signals
Methane Potential Analysis Systems for Biomass
Sonication - Denitrification improvement
Sonication - Anaerobic Digestion improvement
Sonication - Reduction of Foaming in Activated Sludge Basins
www.roycewater.com.au
Company Background After over 10 years servicing the Australian water and wastewater marketplace, Royce Water Technologies has established an envied position as a quality supplier of innovative solutions. We take great pride in offering only the best available solutions in analytical monitoring, control and process improvement in Australia’s diverse water and wastewater industry. Royce Water Technologies has a nationwide team of dedicated water and wastewater professionals. Our team services Queensland, New South Wales and Victoria. We have an expert team of partner distributors covering Tasmania, South Australia and Western Australia.
“Our aim is to provide accurate & reliable measurements of process parameters with the lowest overall cost of ownership which leads to improved process quality & reduced energy consumption.” Our team has a combined application and product experience of over 100 years. We are backed by industry expertise from across the globe in our ongoing relationships with the most innovative manufacturers and commitment to professional development. Royce Water is able to deliver the best possible expert advice and solutions to our clients throughout Australia. Royce Water Technologies Directors
Rod Wellings
Phone 0428 571 234 Email
[email protected]
Arthur Kokolekos
Phone 0439 337 247 Email
[email protected]
Tim Curtis
Phone 0408 079 073 Email
[email protected]
www.roycewater.com.au 2
Royce Water Technologies Product Catalogue
Contents Dissolved Oxygen Measurement Online & Portable 10 WTW TriOxmatic 10 WTW FDO Optical 22/24 LTH MXD 70 Series / #95A-20/96A-21 Galvanic 26 Royce 9200/9120 / #95A-20/96A-21 Galvanic 45 YSI ProODO Portable Optical DO Meter
Flow Measurement Online 43 MJK Electromagnetic Flowmeters 43 MJK Open Channel Flow Measurement
pH/ORP (Redox) Measurement Online 9 WTW SensoLyt 22 LTH MXD 70 Series / #S-400/ S410 38 B&C PH/MV3630 PH & ORP (Redox) 24VDC Loop Transmitters 41 Water Analytics 4-20mA Ouput pH & ORP (Redox) Sensors
Water & Wastewater Automatic Samplers 46 Aquamatic Portable Samplers #P2 Compact/Coolbox/Multiform 47 Aquamatic Stationary Samplers #S200/S320/S320H
Conductivity (Salinaty & TDS) Measurement Online 9 WTW TetraCon 22 LTH MXD 70 Series 24 ECS-40.ECS-20 % UV Measurement Online 17 Chemscan Mini 18 Chemscan Process Analyser Phosphate Measurement Online 14 WTW P 700 - Orthophosphate 17 Chemscan Mini 18 Chemscan Process Analyser Ammonia/Ammonium Measurement Online 12 WTW VARiON - Ammonium & Nitrate 12 WTW AmmoLyt - Ammonium 17 Chemscan Mini 18 Chemscan Process Analyser Nitrate / Nitrate Measurement Online 12 WTW VARiON - Ammonium & Nitrate 12 WTW NitraLyt - Nitrate 13 WTW NitraVis - UV Spectral Measurement of Nitrate 13 WTW NiCaVis - UV Spectral Measurement of Nitrate COD/TOC/ DOC/BOD/SAC 18 Chemscan Process Analyser Total Suspended Solids / Turbidity Measurement Online / Portable 11 WTW VisoTurb 11 WTW ViSolid 22 LTH MXD 70 Series / #TU-8355 25 Royce 711 Portable TSS Meter 27 Royce #7011A / #72A/73B 32 Water Quality Monitoring Station - Turbidity Measurement 33 B&C Turbidity Meter / #TU910/810/8182 36 B&C Turbidity Sensors #TU8325/8525 Low Range Turbidity Sensors 37 B&C Turbidity Sensors #TU8355/8555 High Range Turbidity Sensors Sludge Blanket / Interface Level Measurement Online 14 WTW IFL - Sludge Level 28 Royce 2511A / #25DN/25SHE Chloramination / Chlorination / De-Chlorination Measurement Online 17 Chemscan Mini 18 Chemscan Process Analyser 30 B&C Free Chlorine Meter / #SZ283/SZ7233 32 Water Quality Monitoring Station - Free Chlorine Measurement 39 B&C CL3630 Free Chlorine 24VDC Loop Transmitters Manganese Measurement Online 17 Chemscan Mini
Pump Controllers 44 MJK Pump Controllers
Sonication 48 Ultrawaves Sonication to improve Denitrification Process 48 Ultrawaves Sonication to Increase Biogas in Anaerobic Digesters 48 Ultrawaves Sonication to reduce Foaming in Activated Sludge Processes & Anaerobic Digesters Biomass Methane Potential Test Systems 52 Bioprocess Control AMPTS 11 Methane Potential Test System 52 Bioprocess Control Continuously Stirred Tank Reactors to simulate full scale fermentation processes 53 Bioprocess Control Endeavour System to determine a substrates true energy content 53 Bioprocess Control Ultra-low gas flow measurement 53 Bioprocess Control Bioreactor Simulator Adenosine Triphosphate Measurement 54 LuminUltra Biomass Cell Stimulant 57 Byo-Gon #PX-109 Algae Control 58 Sonic Solutions - Elimination of Algae in Ponds & Lakes Pressure Calibration 59 Crystal Pressure Calibrators Temperature Calibration 60 Jofra Dry Block Temperature Calibrators Signal Calibration 61 Jofra Signal Calibrators Accessories, Mountings, Connectors & Enclosures 15 WTW Sensor Flow Through Adaptors #EBST 700-DU/N 15 WTW Sensor Retractable Armature for Pipe installations #WA700/10 15 WTW Sensor Extensions #UA 55/130/SO 15 WTW Sensor Holder #EH/U 170 15 WTW Sensor Stainless Steel Pipe Weld-in Socket #ESS700VA10 & #ADA DFXX 15 WTW Sensor Float #S 200 15 WTW Sensor Connectors 29 Hand Rail & Pipe Adaptor 29 Marine Grade Aluminium Enclosure 29 Jethead for Sensor Jet Cleaning Case 16 20 21 50 51
Studies Biological Nutrient Reduction Online Process Analyser to monitor Chloramination process Real Time Control Optimises Extended Aeration Processes Ultrasound System for improvement of Anaerobic Digestion in Wastewater Treatment Plants Ultrasound Sludge disintegration of Sewage Sludge used as an Internal Carbon Source for Denitrification
SCADA 40 Water Analytics 2300 Four & Eight Channel 4-20mA Input Controller with Web Based Control Level Measurement Online 42 MJK Hydrostatic, Ultrasonic Level Sensors & Float Switches
www.roycewater.com.au
For a quick & easy reference please refer to the Instrument Quick Selection Guide on page 62 Product Catalogue Royce Water Technologies
3
WTW IQ Sensor Net 2020 XT System-wide Process System-wide Process Monitoring & Control Monitoring & Control Aeration: Aeration: D.O., Ammonium, D.O., Ammonium, Nitrate, TSS, pH Nitrate, TSS, pH
IQ Sensor Net 2020 XT Infl Influent: uent: pH, pH,Conductivity, Conductivity, Ammonium, Ammonium, COD, COD,TOC, TOC, DOC, DOC, BOD, BOD, SAC SAC
14 14
4
Royce Water Technologies Product Catalogue
Effluent: Ammonium, Nitrate, pH, Conductivity, D.O., Turbidity, COD, TOC, DOC, BOD, SAC
Back-up Terminal Final Settling: Nitrogen, Turbidity, TSS, pH, Sludge Blanket Level
15
www.roycewater.com.au
Product Catalogue Royce Water Technologies
5
Royce Water Technologies
Continuous Process Monitoring & Control WTW - IQ Sensor Net 2020 XT Improve operational efficiency with continuous data. With an easily scalable solution, the 2020 XT allows for the connection of up to 20 sensors. Add sensors at any time and at any location or change them out with ease. This completely modular plug-and-play system allows you to monitor and control the water quality in your wastewater facility continuously and accurately. Only WTW can offer: 3-year warranty Ultrasonic cleaning on some sensors System-wide lightning protection Modular expansionv from 1 to 20 sensors Easily stack modules without extra wiring One cable for power and communications Factory-calibrated optical DO cap with a 2-year warranty USB interface (can be used for security) System redundancy for backup control The System 2020 XT Up to 20 digital sensors, any combination Easy, intuitive system expansion Centralised power supply along entire network Numerous relays and outputs may be selected Communications via modem, Bluetooth, radio transmission, PROFIBUS, MODBUS, RS-232 LED status update Integrates into existing systems Change or move parameters at any time with ease
Measuring Parameters Temperature pH ORP(Redox) Conductivity Salinity TDS Dissolved Oxygen Turbidity Suspended Solids (TSS) Ammonium Nitrate Potassium COD, TOC, DOC, BOD, SAC Sludge Blanket Level Ortho-Phosphate.
2020 XT Terminal
An example of a 2020 XT system using 7 sensors to monitor and control throughout a facility.
6
Royce Water Technologies Product Catalogue
Certifications
ETL, cETL (conforms with relevant UL and Canadian standards), CE
Integrated Lightning Protection
EN 61326 enhanced over voltage Protection for entire system
Electrical
Directly via IQ SensorNet when coupled to an MIQ module
Datalogging
525,600 data sets
Display
Graphic; 320 x 240 pixels; backlit
Warranty
3 years
Operating Temperature -4 to 131º F (-20 to 55ºC)
WTW - IQ Sensor Net 182 System The WTW IQ Sensor Net 182, 182 XT, or 182 XT-4 is a modular system for a complete sensor network ideal for various installation needs. The modular system can accept additional sensors easily at any time. This is a powerful system to continuously measure water quality parameters anywhere in a facility for process control. System 182 Connect 1-4 digital sensors for a variety of parameters 2-wire cable provides power and communications Ultrasonic cleaning on some sensors System-wide lightning protection Analog or digital outputs; relays 3-year warranty Model 182 1-2 sensors 2 x 4-20mA Outputs 3 relays
Model 182 XT-4 shown stacked on two IQ Sensor Net Modules
Measuring Parameters Temperature pH ORP(Redox) Conductivity Salinity TDS Dissolved Oxygen Turbidity Suspended Solids (TSS) Ammonium Nitrate Potassium COD, TOC, DOC, BOD, SAC
5 relays
Model 182 XT-4 1-4 sensors 5 x 4-20mA Outputs 6 relays
An example of the 182 XT-4 using 4 sensors to monitor and control throughout a facility
182 Terminal Certifications
ETL, cETL (conforms with relevant UL and Canadian standards), CE
Integrated Lightning Protection
EN 61326 enhanced over voltage protection for entire system
Electrical
Directly via IQ SensorNet when coupled to an MIQ module
Display
Graphic; 128 x 64 pixels; backlit
Warranty
3 years
Operating Temperature
-4 to 131º F (-20 to 55ºC)
www.roycewater.com.au
Model 182 XT 1-2 sensors 4 x 4-20mA Outputs
Product Catalogue Royce Water Technologies
7
Royce Water Technologies
IQ Sensor Net Modules IQ Sensor Net modules provide a variety of functions from power, to communications, to outputs in order to improve your system’s efficiency. All modules can be installed anywhere in the system, either individually or in stacks. Up to three modules can be mechanically connected to form a stack. Simultaneous mechanical and electrical connections are instantaneous once stacked. Mechanical docking of a terminal A Terminal TC 2020 XT can be easily connected to each module. The electrical contact for the power supply and data communication is made simultaneously with the mechanical connection. Stack mounting of modules Up to three modules can be mechanically connected to form a stack. Simultaneous mechanical and electrical connection to data and power transmission. The individual modules of the stack can be accessed at any time without dismantling the stack by simply undoing two lateral screws. Distributed mounting of modules All modules can be installed
anywhere in the system, both individually and in stacks. When not stacked, system components are connected via the 2-wire shielded SNCIQ Sensor Net cable. Each Sensor Net connection of a system component can be used to extend the IQ Sensor Net cable. Furthermore, IQ sensors can also be connected directly to the Sensor Net terminals. Terminator function of the modules Each module is equipped with a terminator function. This function is a terminating resistor that can be switched on and off as required. This is important whenever a module is located at the end position in the Sensor Net.
Local identity function The local ID function is integrated in each module in the form of a memory component. The memory can be used to store relevant information when configuring the system such as location and designation of the measurement location and the sensors connected there. When connecting a terminal, this information is output and facilitates rapid localisation of sensors for calibration purposes. Diagnosis via LEDs Each module is provided with two LEDs (yellow/red) for diagnostic purposes. They are located on the side of the module and are clearly visible at all times. They indicate whether the respective module is operational (power supply/data communication).
Module Options
2020 XT (up to 20 sensors) Part Numbers
182 XT-4 (up to 4 sensors) 182 XT (up to 2 sensors) 182 (up to 2 sensors) Part Numbers
Power Supply Modules
MIQ/PS, MIQ/24V
DIQ/S 182/24V, DIQ/S 182 XT/24V, DIQ/S 182 XT-4/24V
Analog Output Modules
MIQ/CR3, MIQ/C6, MIQ/R6
MIQ/CR3, MIQ/C6, MIQ/R6
Interface Modules
MIQ/IF232, MIQ/2-MOD, MIQ/2-PR
DIQ/S 182 XT-4 PR, DIQ/S 182 XT-4 MOD, DIQ/S 182 XT-4, PR/24V, DIQ/S 182 PR, DIQ/S 182 MOD, DIQ/S 182 PR/24V, DIQ/S 182, MOD/24V, DIQ/S 182 XT-4 MOD/24V
Magnetic Valve Modules
MIQ/CHV Plus
DIQ/CHV, MIQ/CHV Plus
Bluetooth Communication Modules
MIQ/BluePS
MIQ/BluePS
Analog Input Modules
MIQ/IC2
MIQ/IC2
Extension Modules
MIQ/JB, MIQ/JBR
DIQ/JB, MIQ/JB
Compensation Modules
MIQ/MC2, MIQ/2-PR, MIQ/2-MOD
Controller Modules
MIQ/MC2, MIQ/MC2-PR, MIQ/MC2-MOD
8
Royce Water Technologies Product Catalogue
IQ Sensor Net Sensors All IQ Sensor Net sensors are rugged, reliable digital sensors designed specifically for wastewater applications. Once a sensor is fixed at a location, it can easily be moved by the user. Sensors can also be switched out with different sensor parameters without rewiring or running conduit. Simply unscrew one and put the new one in place.
WTW TetraCon®
Conductivity/Salinity/TDS
4-electrode design Robust and durable in the field Wide measurement range Fouling resistant 2-year warranty
WTW SensoLyt® pH/ORP
SensCheck function monitors sensors Electrodes are protected Easily replace electrodes without tools as needed Pre-amplifi ed sensors Digital sensors store calibration 2-year warranty (6-months electrodes)
www.roycewater.com.au
TetraCon® Sensor Operating Temperature
32 to 140ºF (0 to 60ºC)
Conductivity
Range: 0.00 to 20.00 μS/cm 0.0 to 200.0 μS/cm 0.000 to 2.000 mS/cm 0.00 to 20.00 mS/cm 0.0 to 200.0 mS/cm 0 to 500 mS/cm Accuracy: ± 1.5% of reading without calibration ± 0.7% of reading with calibration
Salinity
Range: 0 to 70 ppt
TDS
Range: 0 to 2000 mg/L
Cell Constant
K = 0.917 cm (in free solution) K = 0.933 (with fl ow thru adapter)
SensoLyt® Sensor Operating 32 to 140ºF (0 to 60ºC) Temperature Electrode Type
SEA & SEA-HP pH (gelpolymer solid electrolyte with double pinhole diaphragm; AgCI free and resistant to sulfides)
DWA pH (modified gel electrolyte with single pinhole diaphragm)
ECA pH (gel electrolyte with single pinhole diaphragm)
PtA mV (gelpolymer solid electrolyte with double pinhole diaphragm
Range
2 to 12 pH units & 4 to 12 pH units
0 to 14 pH units
2 to 12 pH units
± 2000 mV (depends on terminal)
Product Catalogue Royce Water Technologies
9
Royce Water Technologies
IQ Sensor Net Sensors WTW TriOxmatic® Series Electrochemical Dissolved Oxygen Sensor – ECDO
ECDO stands for Electrochemical Dissolved Oxygen Sensor. 60 years ago, Clark’s cell was introduced and WTW was among the first manufacturers to advance this principle for water and wastewater applications. SensReg function monitors electrolytic solution SensLeak function monitors for membrane leakage Fouling resistant No break-in period or long-term drift Digital sensors store calibrations 2-year warranty
TriOxmatic® Series Sensor Operating Temperature
32 to 140ºF (0 to 60ºC)
Electrode Type
Electrochemical DO with reference electrode
Range
700 IQ 0.0 to 60.0 mg/L 0 to 600%
701 IQ 0.00 to 20.00 mg/L 0.0 to 60.0 mg/L 0.0 to 200.0% 0 to 600%
702 IQ 0 to 2000 μg/L 0.00 to 10.00 mg/L 0 to 110%
Resolution
0.1 mg/L 1%
0.01 mg/L 0.1 mg/L 0.1% 1%
0.001 mg/L 0.01 mg/L 0.1%
Response Time at 25ºC
T90 = 180 seconds T90 = 30 seconds T90 = 30 seconds T99 = 90 seconds T99 = 110 seconds
Minimum Flow Rate 0.05 m/s (1.9 in/sec) 0.23 m/s (9 in/sec) 0.3 m/s (11.8 in/sec)
WTW FDO® 700 IQ
Optical Dissolved Oxygen Sensor The right choice of measuring technology for D.O. is of essential importance for the performance of the wastewater plant. WTW offers well proven electrochemical and innovative optical D.O. sensors. No electrolyte, calibration, interferences, or warm-up period Zero oxygen consumption technology eliminates the need for stirring Resistant to bubbles bursting on the sensor with 45 degree angle Extremely long sensor cap life; factory calibrated 2-year warranty
10
FDO® 700 IQ Sensor Interferences
None
Calibration
Factory calibrated
Operating Temperature
23 to 122ºF (-5 to 50ºC)
Electrode Type
Optical DO
Range
0 to 20.00 mg/L 0 to 200.0%
Resolution
0.01 mg/L 0.1%
Response Time at 25ºC
FDO 700 IQ T90 =