PRODUCT
CATALOG 2015
2090 rue Moreau, Suite 100 H1W 2M3 Montréal QC - Canada T +1 514 590 0099 F +1 514 590 0098
[email protected] www.eklipselighting.com
V02 Eklipse © 2015
2015 / 09 / 24
NEW PRODUCTS 2015 NIXE PIXIS
7 13
FLOW FAMILY FLOW FLOW COVE FLOW FLEX
23 29 35
HORIZON FAMILY HORIZON HORIZON FLEX HORIZON WET HORIZON WET FLEX HORIZON V HORIZON CONTOUR
45 53 61 67 73 79
LED LINEAR SERIES
HORIZON MINI FAMILY HORIZON MINI HORIZON MINI FLEX HORIZON MINI WET
89 95 103
SPECIFIC USE FAMILY EDGE STREAMLINE
111 117
ORION FAMILY ORION 4 ORION 4 +
127 133
TRACK FAMILY ARGO LATITUDE RAIL
141 149
LIGHT MANAGER PSD PSB
155 161 165
LED SPOT SERIES
LED LIGHTING POWER SUPPLIES
V02 Eklipse © 2015
2015 / / 24
V02 Eklipse © 2015
2015 / 09 / 24
Back to index 5
NEW PRODUCTS 2015 V02 Eklipse © 2015
2015 / 09 / 24
Back to index 6
V02 Eklipse © 2015
2015 / 09 / 24
EKLIPSE NIXE - V2015 / 2 - EN - SPECIFICATION
Back to index
NIXE
LINEAR LED
7
Back to index
NIXE
8
LINEAR LED ED
CHARACTERISTICS
APPLICATIONS
Our new NIXE recessed linear LED luminaire is one of the smallest on the market, measuring only 3/8 inches - barely the width of a fountain pen. It integrates its environment perfectly and seamlessly, without any apparent trims or edges. This benefits aesthetic as well as functional values, keeping the surface even and diffusing light without interruption. We have specially studied and developed its linear optics to create a light source without any visible dots, giving constant and uniform luminance. Despite this technical challenge, NIXE still controls its light distribution! It offers four different light beams, from very narrow to very wide, as well as an asymmetrical distribution. ELECTRICAL
PHYSICAL
SOURCE AND OPTICS
INPUT Available from 3W/ft to 6.5W/ft in increments of 0.5W/ft.
CONSTRUCTION High thermal conductive extruded aluminium.
LIGHT SOURCE Mid power linear LEDs.
REMOTE POWER SUPPLY 24V: Eklipse PSB-24-100.
LIGHT ENGINE 24V: increments of 2” (51 mm) and 8” (203 mm).
EKLIPSE NIXE - V2015 / 2 - EN - SPECIFICATION 1
DIMMING POWER SUPPLY 24V: Eklipse LM-24-100. WIRING 48” length (1.2 m) - 20 AWG wire lead with WAGO quick connector. * THERMAL CONTROL Through constant thermal monitoring & current control, Eklipse intelligent board technology (IBT) maintains optimal light levels and operating temperature preventing harmful overheating by self adjusting to its environment.
ADJUSTMENT Magnetic insert allows a quick and easy installation. FINISH Anodized clear. *
LIGHT TEMPERATURE 2700K, 3000K, 3500K, 4000K. * CRI 85 (typical). OPTICS 20° with visible dots. 40° with some degree of dots visible. 70°, 100° diffused and asymmetric in uniform luminance (no visible dots).
* Available for tailor-made application. Please contact your Eklipse representative for further informations.
Back to index
NIXE
9
LINEAR LED
NOMINAL DIMENSIONS
Y Z X
X 0.375” (10 mm) Y 0.500” (13 mm) Z Extrusion available in 2” increments, up to 72” (refer to ordering code).
EKLIPSE NIXE - V2015 / 2 - EN - SPECIFICATION 2
Nominal dimensions do not include end caps.
LIGHT ENGINE 120°
The Mild Blend offers a large beam and smaller distance between LEDs reducing spotting effect. INCREMENTS & VOLTAGE The Mild Blend light engine is available in increments of 2 and 8 inches. This means that you can ORDERYOURÚXTUREINORINCH multiples to a maximum length of 72 inches.
PARTS
Proprietary linear optics
Light engine
Aluminium support
No matter what increment you choose, the Mild Blend light engine runs at 24 volts.
End cap
Back to index
NIXE
10
LINEAR LED
DESIGN CONCEPT Asymmetric light beam
MOUNTING OPTIONS Narrow light beam
EKLIPSE NIXE - V2015 / 2 - EN - SPECIFICATION 3
Magnetic insert (MI)
100° Diffused light beam
Back to index
NIXE
11
LINEAR LED
ORDERING CODE MODEL ANATOMY OF AN EKLIPSE ORDERING CODE: MODEL
N
N = NIXE
VOLTAGE
-
24V 24V= 24 volts
WATTAGE /FT
-
5.5W 3 3.5 4 4.5 5 5.5 6 6.5
W W W W W W W W
LIGHT ENGINE
-
MB MB = Mild blend
LENGTH
-
END CAP
64 2 4 6 8 10 12 14 16 18 20 22 24 26 28
30 32 34 36 38 40 42 44 46 48 50 52 54 56
58 60 62 64 66 68 70 72
MI MI = Magnetic insert
WIRING
-
L
EXTRUDED OPTICS
-
AS
L = Left 20 = 20° Clear R = Right 40 = 40° Semi-frosted 70 = 70° Diffused 100 = 100° Diffused AS = Asymmetric diffused
FILM
-
NA
COLOR
-
27K
FINISH
-
ACL
NA = Not available 27K = 2700K ACL = Anodized clear 30K = 3000K CUS = Custom 35K = 3500K 40K = 4000K CUS = Custom
Lengths in inches. Bracket thickness not included.
EKLIPSE NIXE - V2015 / 2 - EN - SPECIFICATION 4
Final Eklipse ordering code:
N - 24V - 5.5W - MB - 64 - MI - L - AS - NA - 27K - ACL
INSTALLATION NOTES
WARRANTY Five (5) years on parts.
APPROVAL Approved CSA / UL and CE. 2090 rue Moreau, Suite 100 Montréal, Qc, H1W 2M3 t. 514.590.0099 | f. 514.590.0098 e.
[email protected] w. www.EklipseLighting.com SPECIFICATIONS MAY VARY, WITHOUT ALTERING OR REDUCING PRODUCT PERFORMANCE. ALL INFORMATION ON THIS DOCUMENT ARE THE SOLE PROPERTY OF EKLIPSE. REPRODUCTION OF THIS DOCUMENT, IN WHOLE OR IN PART, WITHOUT WRITTEN PERMISSION IS ILLEGAL.
Back to index 12
V02 Eklipse © 2015
2015 / 09 / 24
EKLIPSE // PIXIS - V2015 / 6 - EN - SPECIFICATION
PIXIS MINI LED SPOT
Back to index 13
Back to index
PIXIS
14
MINI LED SPOT
CHARACTERISTICS The PIXIS is a mini LED spot that uses the latest technology in LED light output performance. It features 3 high powered LED in a very small package that is fully adjustable. Each PIXIS head can be fully rotated horizontally and allows for a 80° pivoting angle. Furthermore, it can be ordered with different mounting options: on a stem or with a plug an play connector. The PIXIS is ideal for application requiring small yet precise lighting solution.
ELECTRICAL
PHYSICAL
SOURCE AND OPTICS
INPUT 12V: 3.5W. Dry locations only. Class 2 input only.
CONSTRUCTION High thermal conductive machined aluminium. Cold roll steel lens holder and arm. Brass stem.
LIGHT SOURCE Three high power LEDS.
REMOTE POWER SUPPLY 12V: Eklipse PSB-12-60.
EKLIPSE PIXIS - V2015 / 6 - EN - SPECIFICATION 1
DIMMING POWER SUPPLY 12V: Eklipse LM-12-60. WIRING Each PIXIS head comes equipped with 24 AWG wire. * THERMAL CONTROL Through constant thermal monitoring & current control, Eklipse intelligent board technology (IBT) maintains optimal light levels and operating temperature preventing harmful overheating by self adjusting to its environment.
LIGHT ENGINE High precision machined construction integrated heatsink. Field changeable snoot and lenses. ADJUSTMENT PIXIS head rotates 360° and can be tilted 80°. Stem rotates 360° independently for each PIXIS head.
LIGHT TEMPERATURE 2700K, 3000K, 3500K, 4000K. * OPTICS 18°, 24°, 41°. CRI 85 (typical). HIGH CRI 95 (typical).
FINISH Chrome, brushed chrome, black chrome or anodised black. *
* Available for tailor-made application. Please contact your Eklipse representative for further informations.
APPLICATIONS
Back to index
PIXIS
15
MINI LED SPOT
DOUBLE HEAD
SINGLE HEAD
C
U
D
V T
S
DIMENSIONS A B C D E F
D 0.484 in (12 mm) ~ 1.000 in (25 mm) 1.215 in (31 mm) D 0.920 in (23 mm) ~ 1.600 in (40 mm) Minimum 0.625 in (16 mm)
S T U V W X Y Z
1.625 in (41 mm) 1.250 in (32 mm) ~ 2.000 in (51 mm) ~ 1.400 in (36 mm) Custom length D 0.250 in (6 mm) D 0.625 in (16 mm) 0.875 in (22 mm)
B A
C D
EKLIPSE PIXIS - V2015 / 6 - EN - SPECIFICATION 2
E
F
W
W X
Ideal for quick connect/ DISCONNECTCONÚGURATIONS THE PIXIS is available with a plug and play jack.
The PIXIS can alternatively be ordered with its STEM mount. It can be order with a desired STEM length and with a choice of either 1 or 2 heads.
Y
Z
Back to index
PIXIS
16
MINI LED SPOT
LIGHT ADJUSTMENTS The PIXIS head can be horizontally rotated a full 360° and can be combined with a 80° angle tilt for maximum light beam control. If combined with a STEM, PIXIS head can rotate vertically 360°.
CUSTOMIZATION 4HE0)8)3CANACCOMMODATEUPTOTWO INTERCHANGEABLEÚLMSAND one (1) optic.
360°
80°
EKLIPSE PIXIS - V2015 / 6 - EN - SPECIFICATION 3
Optic Film
360°
Snoot
360°
360°
360° 80° 360° 360°
80° 80°
Back to index
PIXIS
17
MINI LED SPOT
STEM MOUNT ORDERING CODE MODEL ANATOMY OF AN EKLIPSE ORDERING CODE: MODEL
P P = PIXIS
VOLTAGE
-
12V 12V = 12 volts
WATTAGE
-
MOUNTING
3.5W
-
3.5W = 3.5 watts
S
STEM LENGTH
-
STEM HEAD
10
S = Stem mount
5 5.5 6 6.5 7 7.5
8 8.5 9 9.5 10 10.5
11 11.5 12
OPTICS
1H
-
24
1H = Single head 2H = Double head
18 = 18° 24 = 24° 41 = 41°
STEM HEAD
OPTICS
COLOR
-
27K 27K 30K 35K 40K CUS
= 2700K = 3000K = 3500K = 4000K = Custom
FINISH
-
ABK CH BC BCH ABK CUS
= Chrome = Brushed chrome = Black chrome = Anodised black = Custom
Stem length is calculated in inches. Final ordering code:
P - 12V - 3.5W - S - 10 - 1H - 24 - 27K - ABK
PLUG AND PLAY JACK ORDERING CODE MODEL ANATOMY OF AN EKLIPSE ORDERING CODE: MODEL
P
EKLIPSE PIXIS - V2015 / 6 - EN - SPECIFICATION 4
P = PIXIS
VOLTAGE
-
12V
WATTAGE
-
3.5W
MOUNTING
-
PP
12V = 12 volts 3.5W = 3.5W watts PP = Plug and play connector
Final ordering code:
STEM LENGTH
-
N/A
-
N/A
Not available for the Not available for plug and play version. the plug and play version.
-
24 18 = 18° 24 = 24° 41 = 41°
COLOR
-
27K 27K = 2700K 30K = 3000K 35K = 3500K 40K = 4000K CUS = Custom
FINISH
-
ABK CH BC BCH ABK CUS
= Chrome = Brushed Chrome = Black Chrome = Anodised Black = Custom
P - 12V - 3.5W - PP - N/A - N/A - 24 - 27K - ABK
INSTALLATION NOTES
WARRANTY Five (5) years on parts.
APPROVAL Approved CSA / UL and CE. 2090 rue Moreau, Suite 100 Montréal, Qc, H1W 2M3 t. 514.590.0099 | f. 514.590.0098 e.
[email protected] w. www.EklipseLighting.com SPECIFICATIONS MAY VARY, WITHOUT ALTERING OR REDUCING PRODUCT PERFORMANCE. ALL INFORMATION ON THIS DOCUMENT ARE THE SOLE PROPERTY OF EKLIPSE. REPRODUCTION OF THIS DOCUMENT, IN WHOLE OR IN PART, WITHOUT WRITTEN PERMISSION IS ILLEGAL.
Back to index 18
V02 Eklipse © 2015
2015 / 09 / 24
Back to index 19
LED LINEAR SERIES
V02 Eklipse © 2015
2015 / 09 / 24
Back to index 20
V02 Eklipse © 2015
2015 / 09 / 24
Back to index 21
FLOW FAMILY V02 Eklipse © 2015
2015 / 09 / 24
Back to index 22
V02 Eklipse © 2015
2015 / 09 / 24
EKLIPSE FLOW - V2015 / 2 - EN - SPECIFICATION
FLOW
LINEAR LED
Back to index 23
Back to index
FLOW
24
LINEAR LED
CHARACTERISTICS This linear LED system is made of top-grade extruded aluminum and installs easily with a number of mounting options. The modular FLOW system can be used with three different LED sources and is versatile enough to adapt to a multitude of uses. Originally conceived for use in corners, it fits perfectly anywhere that optimum light distribution is needed to provide decoration, direction, or emphasis. Suitable for both area lighting and accent lighting, FLOW can be ordered with a factory-configured projected angle of 30° or 60° in relation to the installation surface and is the ideal choice for lighting showcases, shelving, and coves. With a variety of mounting systems and accessories to respond to specific requirements, FLOW is tailor-made for your lighting projects.
APPLICATIONS
ELECTRICAL
PHYSICAL
SOURCE AND OPTICS
INPUT
CONSTRUCTION
LIGHT SOURCE
REMOTE POWER SUPPLY
LIGHT ENGINE
LIGHT TEMPERATURE
VOLTAGE A 12V system can be cut in increments of 4 inches FORAMOREPRECISELIGHTÚT More used in vitrine of shelf applications.
Available from 3W/ft to 7.5W/ft in increments of 0.5W/ft.
EKLIPSE FLOW - V2015 / 2 - EN - SPECIFICATION 1
12V: Eklipse PSB-12-60. 24V: Eklipse PSB-24-100.
High thermal conductive extruded aluminium.
DIMMING POWER SUPPLY
12V: Eklipse LM-12-60. 24V: Eklipse LM-24-100.
12V: increments of 4” (102 mm). 24V: increments of 2” and 8” (51 and 203 mm). LEDs are available centered or off-centered.
WIRING
ADJUSTMENT
48” length (1.2 m) - 20 AWG wire lead with WAGO quick connector. * THERMAL CONTROL
Through constant thermal monitoring & current control, Eklipse intelligent board technology (IBT) maintains optimal light levels and operating temperature preventing harmful overheating by self adjusting to its environment.
Light engine comes with a tilt angle of 30° or 60° depending on the installation position. Optional bracket PILC allows a further on-site 90° tilting adjustment.
High power linear LEDs or mid power linear LEDs. 2700K, 3000K, 3500K, 4000K. * CRI
85 (typical). HIGH CRI
95 (typical). BEAM ANGLE 80° or 120°.
A 24V system will allow greater distances with the same power supply and can be cut in increments of 2 and 8 inches. More used in architectural applications. Increments of 4 inches
OPTICS 24°, 35°, 46°, 74°, 20° X 48°.
FINISH
Anodized black, anodized clear or painted white. *
* Available for tailor-made application. Please contact your Eklipse representative for further informations.
Increments of 2 inches Increments of 8 inches
Back to index
FLOW
25
LINEAR LED
NOMINAL DIMENSIONS
MOUNTING OPTIONS
LIGHT ENGINE FOCUS
Narrow beam a more focus application of light. 80°
Z X
Outside Leg Cap Horizontal (OLCH)
WIDE
Spread effect on large surface and allows for optics.
X Extrusion available various lengths up to 72” (refer to ordering code).
Z 0.75” (19.05 mm)
120° Inside Leg Cap Horizontal (ILCH)
120°
PERFECT BLEND
Wider beam with smaller LED gaps for no-scalloping effect. 120°
Inside Leg Cap Vertical (ILCV)
Nominal dimensions do not include mounting options. EKLIPSE FLOW - V2015 / 2 - EN - SPECIFICATION 2
Wider beam with smaller LED gaps for little scalloping effect.
Outside Leg Cap Vertical (OLCV)
Y
Y 0.75” (19.05 mm)
MILD BLEND
APPLICATIONS SHELF LIGHTING Inside Short Leg Cap Horizontal (ISLCH)
Inside Short Leg Cap Vertical (ISLCV)
60° 30°
Pivot Inside Leg Cap (PILC)
Magnetic Insert (MI)
VITRINE LIGHTING
Back to index
FLOW
26
LINEAR LED
FOCUS ORDERING CODE MODEL ANATOMY OF AN EKLIPSE ORDERING CODE: MODEL
F
VOLTAGE
-
12V
WATTAGE /FT LIGHT ENGINE
-
F = FLOW 12V= 12 volts 24V= 24 volts
7W 3 W 3.5 W 4 W 4.5 W 5 W 5.5 W 6 W 6.5 W 7 W 7.5 W
-
F
LENGTH
-
68 12V 8 52 12 56 16 60 20 64 24 68 28 72 32 36 40 44 48
F = Focus
END CAP
24V 8 16 24 32 40 48 56 64 72
PILC
WIRING
-
L
ANGLE
OPTICS
-
NA
-
30
APPLICATION
-
U
FILM
-
30 = 30° U = Uplight 60 = 60° D = Downlight
NA = None OLCH = Outside Leg Cap Horiz. L = Left OLCV = Outside Leg Cap Vertical R = Right ILCH = Inside Leg Cap Horiz. ILCV = Inside Leg Cap Vertical ISLCH = In. Short Leg Cap Horiz. ISLCV = In. Short Leg Cap Vertical PILC = Pivot Inside Leg Cap = Magnetic Insert MI
FF
COLOR
-
CF = Clear Film FF = Frosted Film
27K
FINISH
-
27K = 2700K 30K = 3000K 35K = 3500K 40K = 4000K CUS = Custom
ABK ABK = Anodized black ACL = Anodized clear WH = Painted white CUS = Custom
Lengths in inches. Bracket thickness not included.
Final Eklipse ordering code:
F - 12V - 7W - F - 68 - PILC - L - NA - 30 - U - FF - 27K - ABK
WIDE ORDERING CODE MODEL
EKLIPSE FLOW - V2015 / 2 - EN - SPECIFICATION 3
ANATOMY OF AN EKLIPSE ORDERING CODE: MODEL
F
VOLTAGE
-
12V
WATTAGE /FT LIGHT ENGINE
-
F = FLOW 12V= 12 volts 24V= 24 volts
7W 3 W 3.5 W 4 W 4.5 W 5 W 5.5 W 6 W 6.5 W 7 W 7.5 W
-
W W = Wide
LENGTH
-
68 12V 8 52 12 56 16 60 20 64 24 68 28 72 32 36 40 44 48
END CAP
24V 8 16 24 32 40 48 56 64 72
PILC
L
OLCH = Outside Leg Cap Horiz. L = Left OLCV = Outside Leg Cap Vertical R = Right ILCH = Inside Leg Cap Horiz. ILCV = Inside Leg Cap Vertical ISLCH = In. Short Leg Cap Horiz. ISLCV = In. Short Leg Cap Vertical PILC = Pivot Inside Leg Cap = Magnetic Insert MI
Lengths in inches. Bracket thickness not included.
Final Eklipse ordering code:
WIRING
-
F - 12V - 7W - W - 68 - PILC - L - 24 - 30 - U - NA - 27K - ABK
OPTICS
-
24 24 35 46 74 20x48 NA
ANGLE
-
30
APPLICATION
-
U
30 = 30° U = Uplight = 24° 60 = 60° D = Downlight = 35° = 46° = 74° = 20°x48° = None
FILM
-
NA CF = Clear Film FF = Frosted Film NA = None No film possible if there are optics
FINISH
COLOR
-
27K 27K = 2700K 30K = 3000K 35K = 3500K 40K = 4000K CUS = Custom
-
ABK ABK = Anodized black ACL = Anodized clear WH = Painted white CUS = Custom
Back to index
FLOW
27
LINEAR LED
MILD BLEND AND PERFECT BLEND ORDERING CODE MODEL ANATOMY OF AN EKLIPSE ORDERING CODE: MODEL
F
VOLTAGE
-
24V
WATTAGE /FT LIGHT ENGINE
-
F = FLOW 24V= 24 volts
7W 3 W 3.5 W 4 W 4.5 W 5 W 5.5 W 6 W 6.5 W 7 W 7.5 W
-
B MB= Mild Blend
(Up to 5.5 w/ft)
B = Perfect Blend
LENGTH
64 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36
38 70 40 72 42 44 46 48 50 52 54 58 60 62 64 66 68
END CAP
-
PILC
WIRING
-
L
OPTICS
-
NA
OLCH = Outside Leg Cap Horiz. L = Left NA = None OLCV = Outside Leg Cap Vertical R = Right ILCH = Inside Leg Cap Horiz. ILCV = Inside Leg Cap Vertical ISLCH = In. Short Leg Cap Horiz. ISLCV = In. Short Leg Cap Vertical PILC = Pivot Inside Leg Cap = Magnetic Insert MI
ANGLE
-
30
APPLICATION
-
U
FILM
-
30 = 30° U = Uplight 60 = 60° D = Downlight
FL CF = Clear Film FF = Frosted Film
COLOR
-
27K 27K = 2700K 30K = 3000K 35K = 3500K 40K = 4000K CUS = Custom
FINISH
ABK
-
ABK = Anodized black ACL = Anodized clear WH = Painted white CUS = Custom
Lengths in inches. Bracket thickness not included.
EKLIPSE FLOW - V2015 / 2 - EN - SPECIFICATION 4
Final Eklipse ordering code:
F - 24V - 7W - B - 64 - PILC - L - NA - 30 - U - FL - 27K - ABK
INSTALLATION NOTES
WARRANTY FIve (5) years on parts.
APPROVAL Approved CSA/UL and CE. 2090 rue Moreau, Suite 100 Montréal, Qc, H1W 2M3 t. 514.590.0099 | f. 514.590.0098 e.
[email protected] w. www.EklipseLighting.com SPECIFICATIONS MAY VARY, WITHOUT ALTERING OR REDUCING PRODUCT PERFORMANCE. ALL INFORMATION ON THIS DOCUMENT ARE THE SOLE PROPERTY OF EKLIPSE. REPRODUCTION OF THIS DOCUMENT, IN WHOLE OR IN PART, WITHOUT WRITTEN PERMISSION IS ILLEGAL.
Back to index 28
V02 Eklipse © 2015
2015 / 09 / 24
EKLIPSE FLOW COVE - V2015 / 2 - EN - SPECIFICATION
FLOW COVE
LINEAR LED
Back to index 29
Back to index
FLOW COVE
30
LINEAR LED
CHARACTERISTICS This linear LED system is made of top-grade extruded aluminum and installs easily with a number of mounting options. The modular FLOW COVE system can be used with three different LED sources and is versatile enough to adapt to a multitude of uses. Originally conceived for use in corners, it fits perfectly anywhere that optimum light distribution is needed to provide decoration, direction, or emphasis. Suitable for both area lighting and accent lighting, FLOW COVE can be ordered with a factory-configured projected angle of 60° and is the ideal choice for lighting coves. With a variety of mounting systems and accessories to respond to specific requirements, FLOW COVE is tailor-made for your lighting projects.
APPLICATIONS
ELECTRICAL
PHYSICAL
SOURCE AND OPTICS
INPUT 5.5 W/ft.
CONSTRUCTION High thermal conductive extruded aluminium.
LIGHT SOURCE Mid power linear LEDs.
VOLTAGE A 24V system will allow greater distances with the same power supply and can be cut in increments of 2 and 8 inches. More used in architectural applications.
REMOTE POWER SUPPLY 24V: Eklipse PSB-24-100.
EKLIPSE FLOW COVE - V2015 / 2 - EN - SPECIFICATION 1
DIMMING POWER SUPPLY 24V: Eklipse LM-24-100. WIRING 48” length (1.2 m) - 20 AWG wire lead with WAGO quick connector. * THERMAL CONTROL Through constant thermal monitoring and current control, Eklipse intelligent board technology (IBT) maintains optimal light levels and operating temperature preventing harmful overheating by self adjusting to its environment.
LIGHT ENGINE 24V: increments of 2” and 8” (51 mm and 203 mm). ADJUSTMENT Light engine comes with a tilt angle of 60°. FINISH Anodized black, anodized clear or painted white. *
LIGHT TEMPERATURE 2700K, 3000K, 3500K, 4000K. * CRI 85 (typical). BEAM ANGLE 120°. OPTICS Not available.
* Available for tailor-made application. Please contact your Eklipse representative for further informations.
Increments of 2 inches Increments of 8 inches
Back to index
FLOW COVE
31
LINEAR LED
NOMINAL DIMENSIONS
APPLICATIONS
LIGHT ENGINE
COVE LIGHTING
MILD BLEND Wider beam with smaller LED gaps for minimal scalloping effect.
Z
120°
X
60°
MOUNTING OPTIONS
Outside Leg Cap Horizontal (OLCH)
Outside Leg Cap Vertical (OLCV)
Inside Leg Cap Horizontal (ILCH)
Inside Leg Cap Vertical (ILCV)
Inside Short Leg Cap Horizontal (ISLCH)
Inside Short Leg Cap Vertical (ISLCV)
Y X Extrusion available various lengths up to 72” (refer to ordering code). Y 0.7” (1 mm)
EKLIPSE FLOW COVE - V2015 / 2 - EN - SPECIFICATION 2
Z 0.7” (1 mm) Nominal dimensions do not include mounting options.
Magnetic Insert (MI)
Back to index
FLOW COVE
32
LINEAR LED
GENERAL ORDERING CODE MODEL ANATOMY OF AN EKLIPSE ORDERING CODE: MODEL FC
FC = FLOW COVE
VOLTAGE
-
24V 24V= 24 volts
WATTAGE /FT LIGHT ENGINE
5.5W 5.5W
-
MB MB= Mild Blend
LENGTH
8 10 12 14 16 18 20 22 24 26 28 30 32 34 36
64 38 70 40 72 42 44 46 48 50 52 54 58 60 62 64 66 68
END CAP
-
ILCV
WIRING
-
R
OPTICS
-
OLCH = Outside Leg Cap Horizontal L = Left OLCV = Outside Leg Cap Vertical R = Right ILCH = Inside Leg Cap Horizontal ILCV = Inside Leg Cap Vertical ISLCH= Inside Short Leg Cap Horiz. ISLCV = Inside Short Leg Cap Vertical = Magnetic Insert MI
NA NA = None
ANGLE
-
60
APPLICATION
-
U
FILM
-
60 = 60° U = Uplight
FF FF = Frosted film
COLOR
-
27K 27K = 2700K 30K = 3000K 35K = 3500K 40K = 4000K CUS = Custom
FINISH
ABK
-
ABK = Anodized black ACL = Anodized clear WH = Painted white CUS = Custom
Lengths in inches. Bracket thickness not included.
EKLIPSE FLOW COVE - V2015 / 2 - EN - SPECIFICATION 3
Final Eklipse ordering code:
INSTALLATION NOTES
FC - 24V - 5.5W - MB - 64 - ILCV - R - NA - 60 - U - FF - 27K - ABK
WARRANTY Five (5) years on parts.
APPROVAL Approved CSA/UL and CE. 2090 rue Moreau, Suite 100 Montréal, Qc, H1W 2M3 t. 514.590.0099 | f. 514.590.0098 e.
[email protected] w. www.EklipseLighting.com SPECIFICATIONS MAY VARY, WITHOUT ALTERING OR REDUCING PRODUCT PERFORMANCE. ALL INFORMATION ON THIS DOCUMENT ARE THE SOLE PROPERTY OF EKLIPSE. REPRODUCTION OF THIS DOCUMENT, IN WHOLE OR IN PART, WITHOUT WRITTEN PERMISSION IS ILLEGAL.
Back to index 33
V02 Eklipse © 2015
2015 / 09 / 24
Back to index 34
V02 Eklipse © 2015
2015 / 09 / 24
EKLIPSE FLOW FLEX - V2015 / 2 - EN - SPECIFICATION
FLOW FLEX
CURVABLE LINEAR LED
Back to index 35
Back to index
FLOW FLEX
36
CURVABLE LINEAR LED
CHARACTERISTICS 4HE&,/7&,%8ISACONCEALABLEÚELDCURVABLE,%$LIGHTINGSYSTEMMADEFROMAHIGHERTHERMAL CONDUCTIVEGRADEOFALUMINUM)TSVERSATILEDESIGNALLOWSYOUTOCHOOSEFROMAORPROJECTED LIGHTANGLE4HESETWOFACTORY CONFIGUREDOPTIONSALLOWFORANEXCELLENTLIGHTDISTRIBUTIONINVITRINES SHELVESORVARIOUSCOVELIGHTINGAPPLICATIONS4HEINCREMENTSALLOWYOUTOCURVETHE&,/7&,%8 WITHOUTANYVISIBLELIGHTINTERRUPTION&URTHERMORE THEFIXEDLIGHTANGLEASSURESARELIABLEOPTIMAL POSITIONINGOFTHELIGHTBEAMONCEINSTALLEDONTHEFIELD
ELECTRICAL
PHYSICAL
SOURCE AND OPTICS
INPUT !VAILABLEFROM7FTTO7FTIN INCREMENTSOF7FT
CONSTRUCTION (IGHTHERMALCONDUCTIVE EXTRUDEDALUMINIUM
LIGHT SOURCE (IGHPOWERLINEAR,%$SORMID POWERLINEAR,%$S
REMOTE POWER SUPPLY 6%KLIPSE03" 6%KLIPSE03"
LIGHT ENGINE 6INCREMENTSOFoANDo MMANDMM 6INCREMENTSOFo oAND8” MM MMANDMM ,%$SAREAVAILABLECENTEREDOR OFF CENTERED )NCREMENTSAREREADYTOBE CURVEDON SITE
LIGHT TEMPERATURE + + + +
EKLIPSE FLOW FLEX - V2015 / 2 - EN - SPECIFICATION 1
DIMMING POWER SUPPLY 6%KLIPSE,- 6%KLIPSE,- WIRING oLENGTHM !7' WIRELEADWITH7!'/QUICK CONNECTOR
THERMAL CONTROL 4HROUGHCONSTANTTHERMAL MONITORINGANDCURRENTCONTROL %KLIPSEINTELLIGENTBOARD TECHNOLOGY)"4 MAINTAINS OPTIMALLIGHTLEVELSANDOPERATING TEMPERATUREPREVENTINGHARMFUL OVERHEATINGBYSELFADJUSTINGTOITS ENVIRONMENT
ADJUSTMENT ,IGHTENGINECOMESWITHATILT ANGLEOF°OR°DEPENDINGON THEINSTALLATIONPOSITION
CRI TYPICAL HIGH CRI TYPICAL BEAM ANGLE 80°OR° OPTICS 24 8
FINISH !NODIZEDBLACK ANODIZEDCLEAR ORPAINTEDWHITE
!VAILABLEFORTAILOR MADEAPPLICATION0LEASECONTACTYOUR%KLIPSEREPRESENTATIVEFORFURTHERINFORMATIONS
APPLICATIONS
Back to index
FLOW FLEX
37
CURVABLE LINEAR LED
NOMINAL DIMENSIONS
APPLICATIONS SHELF LIGHTING
Y Z
BEND )NTERIORBENDING
X o oORo OR MM Y oMM
COVE LIGHTING
EKLIPSE FLOW FLEX - V2015 / 2 - EN - SPECIFICATION 2
2” 4” 8”
%XTERIORBENDING
-).)-5- APPROXIMATIVE CURVERADIUS 24”
Z oMM .OMINALDIMENSIONSDONOT INCLUDEMOUNTINGOPTIONS
INCREMENTS
-).)-5- APPROXIMATIVE CURVERADIUS 12”
X Z
MINIMUM CURVE RADIUS
VITRINE LIGHTING
-).)-5- APPROXIMATIVE CURVERADIUS 48”
Back to index
FLOW FLEX
38
CURVABLE LINEAR LED
FOCUS
WIDE
EKLIPSE FLOW FLEX - V2015 / 2 - EN - SPECIFICATION 3
MILD BLEND
PERFECT BLEND
4HE&OCUSLIGHTENGINEOFFERS ANARROWERBEAMFORMORELIGHT PRECISION
4HE7IDELIGHTENGINEOFFERSA WIDERBEAMFORSPREADEFFECTOF LARGESURFACE
4HE-ILD"LENDOFFERSALARGE BEAMANDSMALLERDISTANCE BETWEEN,%$S REDUCINGSPOTTING EFFECT
4HE0ERFECT"LENDOFFERSALARGE BEAMANDNODISTANCEBETWEEN ,%$SALMOSTELIMINATINGTHE SPOTTINGEFFECT
INCREMENTS AND VOLTAGE 4HE&OCUSLIGHTENGINEIS AVAILABLEININCREMENTSOFAND INCHES4HISMEANSTHATYOUCAN ORDERYOURÚXTUREINORINCH MULTIPLESTOAMAXIMUMLENGTHOF INCHES
INCREMENTS AND VOLTAGE 4HE7IDELIGHTENGINEISAVAILABLE ININCREMENTSOFANDINCHES 4HISMEANSTHATYOUCAN ORDERYOURÚXTUREINORINCH MULTIPLESTOAMAXIMUMLENGTHOF INCHES
INCREMENTS AND VOLTAGE 4HE-ILD"LENDLIGHTENGINEIS AVAILABLEININCREMENTSOF ANDINCHES4HISMEANSTHAT YOUCANORDERYOURÚXTUREIN ORINCHMULTIPLESTOAMAXIMUM LENGTHOFINCHES
INCREMENTS AND VOLTAGE 4HE0ERFECT"LENDLIGHTENGINE ISAVAILABLEININCREMENTSOF ANDINCHES4HISMEANSTHAT YOUCANORDERYOURÚXTUREIN ORINCHMULTIPLESTOAMAXIMUM LENGTHOFINCHES
4HE&OCUSLIGHTENGINERUNS ATVOLTSWHENUSINGINCH INCREMENTSANDRUNSATVOLTS WHENUSINGINCHINCREMENTS
4HE7IDELIGHTENGINERUNS ATVOLTSWHENUSINGINCH INCREMENTSANDRUNSATVOLTS WHENUSINGINCHINCREMENTS
.OMATTERWHATINCREMENTYOU CHOOSE THE-ILD"LENDLIGHT ENGINERUNSATVOLTS
.OMATTERWHATINCREMENTYOU CHOOSE THE0ERFECT"LENDLIGHT ENGINERUNSATVOLTS
#HOOSINGANINCREMENTWILL AFFECTTHEMINIMUMCURVERADIUS OFTHE&,/7&,%8&ORA SMALLERRADIUS USETHESMALLEST INCREMENT
#HOOSINGANINCREMENTWILL AFFECTTHEMINIMUMCURVE RADIUSOFTHE&,/7&,%8&ORA SMALLERRADIUS USETHESMALLEST INCREMENT
#HOOSINGANINCREMENTWILL AFFECTTHEMINIMUMCURVERADIUS OFTHE&,/7&,%8&ORA SMALLERRADIUS USETHESMALLEST INCREMENT
#HOOSINGAINCREMENTWILLAFFECT THEMINIMUMCURVERADIUSOF THE(/2):/.&,%8&ORA SMALLERRADIUS USETHESMALLEST INCREMENT
INCREMENT 4 inches 8 inches
MIN. CURVE VOLTAGE RADIUS 24 inches VOLTS 48 inches VOLTS
INCREMENT 4 inches 8 inches
MIN. CURVE VOLTAGE RADIUS 24 inches VOLTS 48 inches VOLTS
INCREMENT 2 inches 4 inches 8 inches
MIN. CURVE VOLTAGE RADIUS 12 inches VOLTS 24 inches VOLTS 48 inches VOLTS
INCREMENT 2 inches 4 inches 8 inches
MIN. CURVE VOLTAGE RADIUS 12 inches VOLTS 24 inches VOLTS 48 inches VOLTS
Back to index
FLOW FLEX
39
CURVABLE LINEAR LED
FOCUS ORDERING CODE MODEL ANATOMY OF AN EKLIPSE ORDERING CODE: MODEL
FF FF = FLOW FLEX
VOLTAGE
-
12V
WATTAGE /FT
-
12V= 12 volts 24V= 24 volts
7W 3 W 3.5 W 4 W 4.5 W 5 W 5.5 W 6 W 6.5 W 7 W 7.5 W
LIGHT ENGINE
-
F
LENGTH
-
F = Focus
SEGMENT
68 12V 4 52 8 56 12 60 16 64 20 68 24 72 28 32 36 40 44 48
24V 8 16 24 32 40 48 56 64 72
4
END CAP
-
4 = 4 inches 8 = 8 inches
MI
OPTICS
WIRING
-
MI = Magnet
L
-
NA
ANGLE
-
30
APPLICATION
-
30 = 30° 60 = 60°
NA = None L = Left R = Right
U
FILM
-
FF
COLOR
-
CF = Clear film FF = Frosted film NA = None
U = Uplight D = Downlight
27K 27K = 2700K 30K = 3000K 35K = 3500K 40K = 4000K CUS = Custom
FINISH
ABK
-
ABK = Anodized black ACL = Anodized clear WH = Painted white CUS = Custom
Lengths in inches. Bracket thickness not included.
FF - 12V - 7W - F - 68 - 4 - MI - L - NA - 30 - U - FF - 27K - ABK
EKLIPSE FLOW FLEX - V2015 / 2 - EN - SPECIFICATION 4
Final Eklipse ordering code:
WIDE ORDERING CODE MODEL ANATOMY OF AN EKLIPSE ORDERING CODE: MODEL
FF FF = FLOW FLEX
VOLTAGE
-
12V 12V= 12 volts 24V= 24 volts
WATTAGE /FT
-
7W 3 W 3.5 W 4 W 4.5 W 5 W 5.5 W 6 W 6.5 W 7 W 7.5 W
LIGHT ENGINE
-
W W = Wide
LENGTH
-
SEGMENT
68 12V 4 52 8 56 12 60 16 64 20 68 24 72 28 32 36 40 44 48
24V 8 16 24 32 40 48 56 64 72
4 4 = 4 inches 8 = 8 inches
Lengths in inches. Bracket thickness not included.
Final Eklipse ordering code:
FF - 12V - 7W - W - 68 - 4 - MI - L - 46 - 30 - U - NA - 27K - ABK
END CAP
-
MI MI = Magnet
WIRING
-
L
OPTICS
-
L = Left 24 R = Right 35 46 74 20x48 NA
46
ANGLE
-
30
30 = 30° = 24° 60 = 60° = 35° = 46° = 74° = 20°x48° = None
APPLICATION
-
U U = Uplight D = Downlight
FILM
-
NA CF = Clear film FF = Frosted film NA = None
No film possible if there are optics
COLOR
-
27K 27K = 2700K 30K = 3000K 35K = 3500K 40K = 4000K CUS = Custom
FINISH
-
ABK ABK = Anodized black ACL = Anodized clear WH = Painted white CUS = Custom
Back to index
FLOW FLEX
40
CURVABLE LINEAR LED
PERFECT AND MILD BLEND ORDERING CODE MODEL ANATOMY OF AN EKLIPSE ORDERING CODE: MODEL
FF FF = FLOW FLEX
VOLTAGE
-
24V 24V= 24 volts
WATTAGE /FT
-
5.5W 3 W 3.5 W 4 W 4.5 W 5 W 5.5 W 6 W 6.5 W 7 W 7.5 W
LIGHT ENGINE
-
MB B = Perfect Blend MB = Mild Blend
(Up to 5.5 w/ft)
LENGTH
SEGMENT
68 2 4 6 8 10 12 14 16 18 20 22 24 26
28 30 32 34 36 38 40 42 44 46 48 50 52
54 56 58 60 62 64 66 68 70 72
4 2 = 2 inches 4 = 4 inches 8 = 8 inches
END CAP
-
MI MI = Magnet
WIRING
-
L
OPTICS
-
NA
NA = None L = Left R = Right
ANGLE
-
30 30 = 30° 60 = 60°
APPLICATION
-
U U = Uplight D = Downlight
FILM
-
FF
COLOR
-
CF = Clear film FF = Frosted film NA = None
27K 27K = 2700K 30K = 3000K 35K = 3500K 40K = 4000K CUS = Custom
FINISH
-
ABK ABK = Anodized black ACL = Anodized clear WH = Painted white CUS = Custom
Lengths in inches. Bracket thickness not included.
EKLIPSE FLOW FLEX - V2015 / 2 - EN - SPECIFICATION 5
Final Eklipse ordering code:
FF - 24V - 5.5W - MB - 68 - 4 - MI - L - NA - 30 - U - FF - 27K - ABK
INSTALLATION NOTES
WARRANTY &IVE YEARSONPARTS
APPROVAL !PPROVED#3!5,AND#% RUE-OREAU 3UITE -ONTRÁAL 1C (7- T\F ESALES EKLIPSELIGHTINGCOM WWWW%KLIPSE,IGHTINGCOM 30%#)&)#!4)/.3 -!9 6!29 7)4(/54 !,4%2).' /2 2%$5#).' 02/$5#4 0%2&/2-!.#% !,, ).&/2-!4)/. /. 4()3 $/#5-%.4 !2% 4(% 3/,% 02/0%249 /& %+,)03% 2%02/$5#4)/. /& 4()3 $/#5-%.4 ).7(/,%/2).0!24 7)4(/5472)44%.0%2-)33)/.)3),,%'!,
Back to index 41
V02 Eklipse © 2015
2015 / 09 / 24
Back to index 42
V02 Eklipse © 2015
2015 / 09 / 24
Back to index 43
HORIZON FAMILY V02 Eklipse © 2015
2015 / 09 / 24
Back to index 44
V02 Eklipse © 2015
2015 / 09 / 24
EKLIPSE HORIZON - V2015 / 2 - EN - SPECIFICATION
HORIZON
LINEAR LED
Back to index 45
Back to index
HORIZON
46
LINEAR LED
CHARACTERISTICS Compact yet very effective, HORIZON is a linear LED system made of high-grade extruded aluminum. It is available with interchangeable optics and lenses to provide incomparable control of light intensity and quantity. Offering a wide range of beams and a number of covers and mounting SYSTEMS (/2):/.ISTOTALLYCUSTOMIZABLEANDAPERFECTRESPONSETOTHESPECIÚCNEEDSOF COMMERCIAL INSTITUTIONAL ANDPRIVATESPACES6ARIABLEANDÛEXIBLE ITCANBEUSEDTOREINTERPRETITS environment with surface grazing with a long throw (up to 20 feet), edge lighting, or suspended ÚXTURES
APPLICATIONS
ELECTRICAL
PHYSICAL
SOURCE AND OPTICS
INPUT
CONSTRUCTION
LIGHT SOURCE
REMOTE POWER SUPPLY
LIGHT ENGINE
LIGHT TEMPERATURE
VOLTAGE A 12V system can be cut in increments of 4 inches FORAMOREPRECISELIGHTÚT More used in vitrine of shelf applications.
Available from 3W/ft to 12W/ft in increments of 0.5W/ft. 12V: Eklipse PSB-12-60. 24V: Eklipse PSB-24-100.
EKLIPSE HORIZON - V2015 / 2 - EN - SPECIFICATION 1
DIMMING POWER SUPPLY
12V: Eklipse LM-12-60. 24V: Eklipse LM-24-100. WIRING
48” length (1.2 m) - 20 AWG wire lead with WAGO quick connector. * THERMAL CONTROL
Through constant thermal monitoring and current control, Eklipse intelligent board technology (IBT) maintains optimal light levels and operating temperature preventing harmful overheating by self adjusting to its environment.
High thermal conductive extruded aluminium. 12V: increments of 4” (102 mm). 24V: increments of 8” (203 mm). ADJUSTMENT
Bracket option PILC allows for an on-site 27° clockwise and 27° anticlockwise pivoting adjustment. Other anchorings available for different integrations.
High power linear LEDs or mid power linear LEDs. 2700K, 3000K, 3500K, 4000K. * CRI
85 (typical). HIGH CRI
A 24V system will allow greater distances with the same power supply but can only be cut in increments of 8 inches. More used in architectural applications.
95 (typical). OPTICS
10°, 27°, 49°, 10°x50°.
FINISH
Anodized black, anodized clear or painted white. *
* Available for tailor-made application. Please contact your Eklipse representative for further informations.
Increments of 4 inches
Increments of 8 inches
Back to index
HORIZON
47
LINEAR LED
NOMINAL DIMENSIONS
APPLICATIONS
LIGHT ENGINE
SURFACE GRAZING
FOCUS
Recommanded light engine: wide with 10°x50° optic.
Narrow beam for a more focus application of light. Can only ACCOMODATEÚLMS 80°
Z WIDE EDGE LIGHTING
X
EKLIPSE HORIZON - V2015 / 2 - EN - SPECIFICATION 2
Y 1.125” (28.58 mm)
Wide beam LED for spread effect on large surface. Can accomodate both optics and ÚLMS 120°
Y
X Extrusion available various lengths up to 72” (refer to ordering code).
Recommanded light engine: wide with 10°x50° optic.
Nominal dimensions do not include mounting options.
MILD BLEND
Wider beam with smaller LED gaps for little scalloping effect. #ANONLYACCOMODATEÚLMS 120°
Z 1.125” (28.58 mm)
PERFECT BLEND
Wider beam with smaller LED gaps for no-scalloping effect. #ANONLYACCOMODATEÚLMS 120°
Back to index
HORIZON
48
LINEAR LED
MOUNTING OPTIONS
ACCESSORIES LOUVER
Outside Leg Cap Horizontal (OLCH)
Outside Leg Cap Vertical (OLCV)
X
EKLIPSE HORIZON - V2015 / 2 - EN - SPECIFICATION 3
Inside Short Leg Cap Horizontal (ISLCH)
Inside Short Leg Cap Vertical (ISLCV)
Y
X 0.875” (28.58 mm) Inside Leg Cap Horizontal (ILCH)
Magnetic Insert (MI)
Inside Leg Cap Vertical (ILCV)
Pivoting Inside Leg Cap (PILC)
Y 1” (28.58 mm)
Please contact your Eklipse representative to order this additional accessory.
Back to index
HORIZON
49
LINEAR LED
FOCUS ORDERING CODE MODEL ANATOMY OF AN EKLIPSE ORDERING CODE: MODEL
H
VOLTAGE
-
12V
WATTAGE /FT LIGHT ENGINE
-
7W
-
3 W 3.5 W 4 W 4.5 W 5 W 5.5 W 6 W 6.5 W 7 W 7.5 W 8 W 8.5 W 9 W 9.5 W 10 W 10.5W 11 W 11.5W 12 W
H = HORIZON 12V= 12 volts 24V= 24 volts
LENGTH
-
68 12V 4 52 8 56 12 60 16 64 20 68 24 72 28 32 36 40 44 48
F = Focus
END CAP
24V 8 16 24 32 40 48 56 64 72
PILC
WIRING
-
L
OPTICS
-
NA
= Magnetic Insert NA L = Left MI OLCH = Outside Leg Cap Horiz. R = Right OLCV = Outside Leg Cap Vertical ILCH = Inside Leg Cap Horiz. ILCV = Inside Leg Cap Vertical ISLCH = In. Short Leg Cap Horiz. ISLCV = In. Short Leg Cap Vertical PILC = Pivot Inside Leg Cap
FILM
-
= None
FF CF FF LF NA
COLOR
-
27K
FINISH
-
27K = 2700K 30K = 3000K 35K = 3500K 40K = 4000K CUS = Custom
= Clear Film = Frosted Film = Linear Optical Film = None
ABK ABK = Anodized black ACL = Anodized clear WH = Painted white CUS = Custom
Lengths in inches. Bracket thickness not included.
H - 12V - 7W - F - 68 - PILC - L - NA - FF - 27K - ABK
Final Eklipse ordering code:
EKLIPSE HORIZON - V2015 / 2 - EN - SPECIFICATION 4
F
WIDE ORDERING CODE MODEL ANATOMY OF AN EKLIPSE ORDERING CODE: MODEL
H
VOLTAGE
-
12V
WATTAGE /FT LIGHT ENGINE
-
H = HORIZON 12V= 12 volts 24V= 24 volts
Final Eklipse ordering code:
7W 3 W 3.5 W 4 W 4.5 W 5 W 5.5 W 6 W 6.5 W 7 W 7.5 W 8 W 8.5 W 9 W 9.5 W 10 W 10.5W 11 W 11.5W 12 W
-
W W = Wide
LENGTH
-
68 12V 4 52 8 56 12 60 16 64 20 68 24 72 28 32 36 40 44 48
END CAP
24V 8 16 24 32 40 48 56 64 72
PILC
WIRING
-
L
= Magnetic Insert L = Left MI OLCH = Outside Leg Cap Horiz. R = Right OLCV = Outside Leg Cap Vertical ILCH = Inside Leg Cap Horiz. ILCV = Inside Leg Cap Vertical ISLCH = In. Short Leg Cap Horiz. ISLCV = In. Short Leg Cap Vertical PILC = Pivot Inside Leg Cap
Lengths in inches. Bracket thickness not included.
H - 12V - 7W - W - 68 - PILC - L - 10 - CF - 27K - ABK
OPTICS
-
10 10 27 49 10x50 NA
= 10° = 27° = 49° = 10°x50° = None
FILM
-
CF CF FF LF NA
= Clear Film = Frosted Film = Linear Optical Film = None
COLOR
-
27K 27K = 2700K 30K = 3000K 35K = 3500K 40K = 4000K CUS = Custom
FINISH
-
ABK ABK = Anodized black ACL = Anodized clear WH = Painted white CUS = Custom
Back to index
HORIZON
50
LINEAR LED
MILD BLEND AND PERFECT BLEND ORDERING CODE MODEL ANATOMY OF AN EKLIPSE ORDERING CODE: MODEL
H
VOLTAGE
-
24V
WATTAGE /FT LIGHT ENGINE
-
H = HORIZON 24V= 24 volts
7W 3 3.5 4 4.5 5 5.5 6 6.5 7 7.5
W W W W W W W W W W
B MB = Mild Blend (Up to 5.5 w/ft)
B
= Perfect Blend
LENGTH
-
64 24V 8 16 24 32 40 48 56 64 72
END CAP
-
PILC
WIRING
-
L
OPTICS
-
= Magnetic Insert MI L = Left NA OLCH = Outside Leg Cap Horiz. R = Right OLCV = Outside Leg Cap Vertical ILCH = Inside Leg Cap Horiz. ILCV = Inside Leg Cap Vertical ISLCH = In. Short Leg Cap Horiz. ISLCV = In. Short Leg Cap Vertical PILC = Pivot Inside Leg Cap
NA = None
FILM
-
COLOR
FF
-
CF = Clear Film FF = Frosted Film FL = Linear Optical Film NA = None
27K 27K = 2700K 30K = 3000K 35K = 3500K 40K = 4000K CUS = Custom
FINISH
ABK
-
ABK = Anodized black ACL = Anodized clear WH = Painted white CUS = Custom
Lengths in inches. Bracket thickness not included.
EKLIPSE HORIZON - V2015 / 2 - EN - SPECIFICATION 5
Final Eklipse ordering code:
INSTALLATION NOTES
H - 24V - 7W - B - 64 - PILC - L - NA - FF - 27K - ABK
WARRANTY Five (5) years on parts.
APPROVAL Approved CSA/UL and CE. 2090 rue Moreau, Suite 100 Montréal, Qc, H1W 2M3 t. 514.590.0099 | f. 514.590.0098 e.
[email protected] w. www.EklipseLighting.com SPECIFICATIONS MAY VARY, WITHOUT ALTERING OR REDUCING PRODUCT PERFORMANCE. ALL INFORMATION ON THIS DOCUMENT ARE THE SOLE PROPERTY OF EKLIPSE. REPRODUCTION OF THIS DOCUMENT, IN WHOLE OR IN PART, WITHOUT WRITTEN PERMISSION IS ILLEGAL.
Back to index 51
V02 Eklipse © 2015
2015 / 09 / 24
Back to index 52
V02 Eklipse © 2015
2015 / 09 / 24
EKLIPSE HORIZON FLEX - V2015 / 3 - EN - SPECIFICATION
HORIZON FLEX
CURVABLE LINEAR LED
Back to index 53
Back to index
HORIZON FLEX
54
CURVABLE LINEAR LED
CHARACTERISTICS Compact yet very effective, HORIZON FLEX is a curvable linear LED system made of high-grade extruded aluminum. It is available with optics and lenses that provide incomparable control of light INTENSITYANDQUANTITY(/2):/.&,%8ISTOTALLYCUSTOMIZABLEANDAPERFECTRESPONSETOTHESPECIÚC needs of commercial, institutional, and private spaces. The increments allow you to curve on-site the HORIZON FLEX, for no visible light interruption. It can be used to reinterpret its environment with SURFACEGRAZINGWITHALONGTHROWUPTOFEET EDGELIGHTING ORSUSPENDEDÚXTURES
APPLICATIONS
ELECTRICAL
PHYSICAL
SOURCE AND OPTICS
INPUT
CONSTRUCTION
LIGHT SOURCE
REMOTE POWER SUPPLY
LIGHT ENGINE
LIGHT TEMPERATURE
VOLTAGE A 12V system can be cut in increments of 4 inches FORAMOREPRECISELIGHTÚT More used in vitrine of shelf applications.
Available from 3W/ft to 12W/ft in increments of 0.5W/ft.
EKLIPSE HORIZON FLEX - V2015 / 3 - EN - SPECIFICATION 1
12V: Eklipse PSB-12-60. 24V: Eklipse PSB-24-100.
DIMMING POWER SUPPLY
12V: Eklipse LM-12-60. 24V: Eklipse LM-24-100. WIRING
48” length (1.2 m) - 20 AWG wire lead with WAGO quick connector. *
High thermal conductive extruded aluminium. 12V: increments of 4” (102 mm). 24V: increments of 4” and 8” (102 mm and 203 mm). FINISH
Anodized black, anodized clear or painted white. *
High power linear LEDs or mid power linear LEDs. 2700K, 3000K, 3500K, 4000K. * CRI
85 (typical). HIGH CRI
A 24V system will allow greater distances with the same power supply and can be cut in increments of 4 and 8 inches. More used in architectural applications.
95 (typical). OPTICS
10°, 27°, 49°, 10°x50°.
Increments of 4 inches
THERMAL CONTROL
Through constant thermal monitoring and current control, Eklipse intelligent board technology (IBT) maintains optimal light levels and operating temperature preventing harmful overheating by self adjusting to its environment.
* Available for tailor-made application. Please contact your Eklipse representative for further informations.
Increments of 8 inches
Back to index
HORIZON FLEX
55
CURVABLE LINEAR LED
NOMINAL DIMENSIONS
APPLICATIONS SURFACE GRAZING
X Increments of 4” or 8” (101 or 203 mm). Y 0.150” (3.81 mm) Z 1.125” (28.57 mm) Nominal dimensions do not include mounting options.
INCREMENTS
4” MINIMUM approximative curve radius 50”
X Z
MINIMUM CURVE RADIUS
Interior bending
Y
Z
EKLIPSE HORIZON FLEX - V2015 / 3 - EN - SPECIFICATION 2
BEND
Exterior bending EDGE LIGHTING
MINIMUM approximative curve radius 100”
8”
Back to index
HORIZON FLEX
56
CURVABLE LINEAR LED
FOCUS
WIDE
PERFECT BLEND
120°
The Focus light engine offers a narrower beam for more light precision.
The Wide light engine offers a wider beam for spread effect of large surface.
The Mild Blend offers a large beam and smaller distance between LEDs reducing spotting effect.
The Perfect Blend offers a large beam and no distance between LEDs almost eliminating the spotting effect.
INCREMENTS AND VOLTAGE
INCREMENTS AND VOLTAGE
INCREMENTS AND VOLTAGE
INCREMENTS AND VOLTAGE
The Focus light engine runs at 12 volts when using 4 inch increments and runs at 24 volts when using 8 inch increments.
The Wide light engine runs at 12 volts when using 4 inch increments and runs at 24 volts when using 8 inch increments.
No matter what increment you choose, the Mild Blend light engine runs at 24 volts.
No matter what increment you choose, the Perfect Blend light engine runs at 24 volts.
Choosing a increment will affect the minimum curve radius of the HORIZON FLEX. For a smaller radius, use the smallest increment:
Choosing a increment will affect the minimum curve radius of the HORIZON FLEX. For a smaller radius, use the smallest increment:
Choosing a increment will affect the minimum curve radius of the HORIZON FLEX. For a smaller radius, use the smallest increment:
Choosing a increment will affect the minimum curve radius of the HORIZON FLEX. For a smaller radius, use the smallest increment:
The Focus light engine is available in increments of 4 and 8 inches. This means THATYOUCANORDERYOURÚXTURE in 4 or 8 inch multiples to a maximum length of 72 inches. EKLIPSE HORIZON FLEX - V2015 / 3 - EN - SPECIFICATION 3
MILD BLEND
80°
INCREMENT 4 inches 8 inches
MIN. CURVE VOLTAGE RADIUS 50 inches 12 volts 100 inches 24 volts
120° 120°
The Wide light engine is available in increments of 4 and 8 inches. This means THATYOUCANORDERYOURÚXTURE in 4 or 8 inch multiples to a maximum length of 72 inches.
INCREMENT 4 inches 8 inches
MIN. CURVE VOLTAGE RADIUS 50 inches 12 volts 100 inches 24 volts
The Mild Blend light engine is available in increments of 4 and 8 inches. This means THATYOUCANORDERYOURÚXTURE in 4 or 8 inch multiples to a maximum length of 72 inches.
INCREMENT 4 inches 8 inches
MIN. CURVE VOLTAGE RADIUS 50 inches 24 volts 100 inches 24 volts
The Perfect Blend light engine is available in increments of 4 and 8 inches. This means THATYOUCANORDERYOURÚXTURE in 4 or 8 inch multiples to a maximum length of 72 inches.
INCREMENT 4 inches 8 inches
MIN. CURVE VOLTAGE RADIUS 50 inches 24 volts 100 inches 24 volts
Back to index
HORIZON FLEX
57
CURVABLE LINEAR LED
FOCUS ORDERING CODE MODEL ANATOMY OF AN EKLIPSE ORDERING CODE: MODEL
HF
VOLTAGE
-
12V
WATTAGE /FT LIGHT ENGINE
-
7W
-
3 W 3.5 W 4 W 4.5 W 5 W 5.5 W 6 W 6.5 W 7 W 7.5 W 8 W 8.5 W 9 W 9.5 W 10 W 10.5W 11 W 11.5W 12 W
HF = 12V= 12 volts HORIZON FLEX 24V= 24 volts
LENGTH
-
68 12V 4 52 8 56 12 60 16 64 20 68 24 72 28 32 36 40 44 48
F = Focus
SEGMENT
-
4
END CAP
-
MI
WIRING
-
L
OPTICS
-
NA
NA 4 = 4 inches MI = Magnetic Insert L = Left 8 = 8 inches R = Right
24V 8 16 24 32 40 48 56 64 72
FILM
-
FF CF FF LF NA
= None
COLOR
-
27K
FINISH
-
27K = 2700K 30K = 3000K 35K = 3500K 40K = 4000K CUS = Custom
= Clear Film = Frosted Film = Linear Optical Film = None
ABK ABK = Anodized black ACL = Anodized clear WH = Painted white CUS = Custom
Lengths in inches. Bracket thickness not included.
HF - 12V - 7W - F - 68 - 4 - MI - L - NA - FF - 27K - ABK
Final Eklipse ordering code:
EKLIPSE HORIZON FLEX - V2015 / 3 - EN - SPECIFICATION 4
F
WIDE ORDERING CODE MODEL ANATOMY OF AN EKLIPSE ORDERING CODE: MODEL
HF
VOLTAGE
-
12V
WATTAGE /FT LIGHT ENGINE
-
HF = 12V= 12 volts HORIZON FLEX 24V= 24 volts
Final Eklipse ordering code:
7W 3 W 3.5 W 4 W 4.5 W 5 W 5.5 W 6 W 6.5 W 7 W 7.5 W 8 W 8.5 W 9 W 9.5 W 10 W 10.5W 11 W 11.5W 12 W
-
W W = Wide
LENGTH
-
68 12V 4 52 8 56 12 60 16 64 20 68 24 72 28 32 36 40 44 48
SEGMENT
24V 8 16 24 32 40 48 56 64 72
4
END CAP
-
MI
WIRING
-
L
OPTICS
-
4 = 4 inches MI = Magnetic Insert L = Left 10 8 = 8 inches R = Right 27 49 10x50 NA
Lengths in inches. Bracket thickness not included.
HF - 12V - 7W - F - 68 - 4 - MI - L - 10 - CF - 27K - ABK
10 = 10° = 27° = 49° = 10°x50° = None
FILM
-
CF CF FF LF NA
= Clear Film = Frosted Film = Linear Optical Film = None
COLOR
-
27K 27K = 2700K 30K = 3000K 35K = 3500K 40K = 4000K CUS = Custom
FINISH
-
ABK ABK = Anodized black ACL = Anodized clear WH = Painted white CUS = Custom
Back to index
HORIZON FLEX
58
CURVABLE LINEAR LED
MILD BLEND AND PERFECT BLEND ORDERING CODE MODEL ANATOMY OF AN EKLIPSE ORDERING CODE: MODEL
HF
VOLTAGE
-
24V
WATTAGE /FT LIGHT ENGINE
-
HF = 24V= 24 volts HORIZON FLEX
7W 3 3.5 4 4.5 5 5.5 6 6.5 7 7.5
W W W W W W W W W W
B MB = Mild Blend (Up to 5.5 w/ft)
B
= Perfect Blend
LENGTH
-
68 4 8 12 16 20 24 28 32 36 40 44 48
52 56 60 64 68 72
SEGMENT
8 16 24 32 40 48 56 64 72
4
END CAP
-
WIRING
MI
-
L
OPTICS
-
4 = 4 inches MI = Magnetic Insert L = Left NA 8 = 8 inches R = Right
NA = None
FILM
-
COLOR
FF CF FF LF NA
-
= Clear Film = Frosted Film = Linear Optical Film = None
27K 27K = 2700K 30K = 3000K 35K = 3500K 40K = 4000K CUS = Custom
FINISH
ABK
-
ABK = Anodized black ACL = Anodized clear WH = Painted white CUS = Custom
Lengths in inches. Bracket thickness not included.
EKLIPSE HORIZON FLEX - V2015 / 3 - EN - SPECIFICATION 5
Final Eklipse ordering code:
INSTALLATION NOTES
HF - 24V - 7W - B - 68 - 4 - MI - L - NA - FF - 27K - ABK
WARRANTY Five (5) years on parts.
APPROVAL Approved CSA/UL and CE. 2090 rue Moreau, Suite 100 Montréal, Qc, H1W 2M3 t. 514.590.0099 | f. 514.590.0098 e.
[email protected] w. www.EklipseLighting.com SPECIFICATIONS MAY VARY, WITHOUT ALTERING OR REDUCING PRODUCT PERFORMANCE. ALL INFORMATION ON THIS DOCUMENT ARE THE SOLE PROPERTY OF EKLIPSE. REPRODUCTION OF THIS DOCUMENT, IN WHOLE OR IN PART, WITHOUT WRITTEN PERMISSION IS ILLEGAL.
Back to index 59
V02 Eklipse © 2015
2015 / 09 / 24
Back to index 60
V02 Eklipse © 2015
2015 / 09 / 24
HORIZON WET
EKLIPSE HORIZON WET - V2015 / 6 - EN - SPECIFICATION
SUBMERSIBLE LINEAR LED
Back to index 61
IP68
HORIZON WET SUBMERSIBLE LINEAR LED
62
IP68
CHARACTERISTICS Compact yet very effective, HORIZON WET is a linear LED system made of high-grade extruded aluminum. Suitable for wet locations (IP68), it provides incomparable light intensity and is a perfect RESPONSETOTHESPECIÚCNEEDSOFCOMMERCIAL INSTITUTIONAL ANDPRIVATESPACES6ARIABLEANDÛEXIBLE IT can be used to reinterpret its environment with surface grazing with a long throw (up to 20 feet), edge LIGHTING ORSUSPENDEDÚXTURES
APPLICATIONS
ELECTRICAL
PHYSICAL
SOURCE AND OPTICS
INPUT
CONSTRUCTION
LIGHT SOURCE
VOLTAGE !6SYSTEMCANBECUT in increments of 4 inches FORAMOREPRECISELIGHTÚT -OREUSEDINVITRINEOFSHELF applications.
Available from 3W/ft to 12W/ft in increments of 0.5W/ft. REMOTE POWER SUPPLY
6%KLIPSE03" 6%KLIPSE03" EKLIPSE (/2):/.7%4 6 %. 30%#)&)#!4)/.1
Back to index
DIMMING POWER SUPPLY
6%KLIPSE,- 6%KLIPSE,- WIRING
48” length (1.2 m) - 20 AWG WIRELEADWITH7!'/QUICK connector. * THERMAL CONTROL
Through constant thermal monitoring AND current control, %KLIPSEINTELLIGENT BOARDTECHNOLOGY)"4 MAINTAINSoptimal light levels and operating temperature preventing harmful overheating by self adjusting to its environment.
High thermal conductive extruded aluminium. Epoxy resin inlay. )0.OINGRESSOFDUSTAND protected against continuous SUBMERSIONATASPECIÚED depth. LIGHT ENGINE
6INCREMENTSOFo (102 mm). 6INCREMENTSOF8” (203 mm).
High power linear LEDs. LIGHT TEMPERATURE
2700K, 3000K, 3500K, 4000K. * CRI
85 (typical). HIGH CRI
95 (typical). OPTICS
7°, 21°, 48°, 14°x55°
ADJUSTMENT
"RACKETOPTION0),#ALLOWS FORANON SITECLOCKWISE ANDANTICLOCKWISEPIVOTING adjustment. Other anchorings available for different integrations. FINISH
!NODIZEDBLACK ANODIZED clear or painted white. *
!VAILABLEFORTAILOR MADEAPPLICATION0LEASECONTACTYOUR%KLIPSEREPRESENTATIVEFORFURTHERINFORMATIONS
!6SYSTEMWILLALLOW greater distances with the same power supply but can only be cut in increments OFINCHES-OREUSEDIN architectural applications. Increments of 4 inches
Increments of 8 inches
HORIZON WET SUBMERSIBLE LINEAR LED
NOMINAL DIMENSIONS
APPLICATIONS
Back to index 63
IP68
MOUNTING OPTIONS
SURFACE GRAZING
Z
Outside Leg Cap Horizontal (OLCH)
X
Inside Short Leg Cap Horizontal (ISLCH)
Inside Leg Cap Horizontal (ILCH)
Y X Extrusion available various lengths up to 72” (refer to ordering code).
EDGE LIGHTING
Y 1.125” (28.58 mm)
Outside Leg Cap 6ERTICAL /,#6
EKLIPSE (/2):/.7%4 6 %. 30%#)&)#!4)/.2
Z 1.125” (28.58 mm)
Inside Short Leg #AP6ERTICAL )3,#6
Inside Leg Cap 6ERTICAL ),#6
Nominal dimensions do not include mounting options.
Lock in position using Allen Key 1.2 mm - 3/64” 33° clockwise and 33° anticlockwise pivoting range
LIGHT ENGINE WIDE
Wide beam LED for spread effect on large surface. 120°
Pivot Inside Leg Cap (PILC)
Back to index
HORIZON WET
64
IP68
SUBMERSIBLE LINEAR LED
GENERAL ORDERING CODE MODEL ANATOMY OF AN EKLIPSE ORDERING CODE: MODEL
HW
VOLTAGE
-
12V
HW =
EKLIPSE (/2):/.7%4 6 %. 30%#)&)#!4)/. 3
12V= 12 volts HORIZON WET 24V= 24 volts
Final Eklipse ordering code:
WATTAGE /FT LIGHT ENGINE
-
7W 3 W 3.5 W 4 W 4.5 W 5 W 5.5 W 6 W 6.5 W 7 W 7.5 W 8 W 8.5 W 9 W 9.5 W 10 W 10.5W 11 W 11.5W 12 W
-
W W = Wide
LENGTH
-
68 12V 4 52 8 56 12 60 16 64 20 68 24 72 28 32 36 40 44 48
END CAP
24V 8 16 24 32 40 48 56 64 72
PILC
WIRING
-
L
L = Left OLCH = Outside Leg Cap Horiz. OLCV = Outside Leg Cap Vertical R = Right ILCH = Inside Leg Cap Horiz. ILCV = Inside Leg Cap Vertical ISLCH = In. Short Leg Cap Horiz. ISLCV = In. Short Leg Cap Vertical PILC = Pivot Inside Leg Cap
OPTICS
-
21 7 21 48 14x55
FILM
-
NA
NA = None = 7° = 21° = 48° = 14°x55°
COLOR
-
27K 27K = 2700K 30K = 3000K 35K = 3500K 40K = 4000K CUS = Custom
FINISH
ABK
-
ABK = Anodized black ACL = Anodized clear WH = Painted white CUS = Custom
Lengths in inches. Bracket thickness not included.
HW - 12V - 7W - W - 68 - PILC - L - 21 - NA - 27K - ABK
INSTALLATION NOTES
WARRANTY &IVE YEARSONPARTS
APPROVAL Approved CSA/UL and CE. 2090 rue Moreau, Suite 100 Montréal, Qc, H1W 2M3 t. 514.590.0099 | f. 514.590.0098 e.
[email protected] w. www.EklipseLighting.com SPECIFICATIONS MAY VARY, WITHOUT ALTERING OR REDUCING PRODUCT PERFORMANCE. ALL INFORMATION ON THIS DOCUMENT ARE THE SOLE PROPERTY OF EKLIPSE. REPRODUCTION OF THIS DOCUMENT, IN WHOLE OR IN PART, WITHOUT WRITTEN PERMISSION IS ILLEGAL.
Back to index 65
V02 Eklipse © 2015
2015 / 09 / 24
Back to index 66
V02 Eklipse © 2015
2015 / 09 / 24
HORIZON WET FLEX
EKLIPSE HORIZON WET FLEX - V2015 / 2 - EN - SPECIFICATION
CURVABLE WATER RESISTANT LINEAR LED
Back to index 67
IP66
Back to index
HORIZON WET FLEX
68
CURVABLE WATER RESISTANT LINEAR LED
CHARACTERISTICS
HORIZON WET FLEX bears exactly the same characteristics as the rest of its family. A clever and compact curvable LED luminaire designed for interior as well as exterior projects. Thanks to its epoxy resin inlay, the luminaire is waterproof. Its physical properties shelter it from dust, rain, and snow. It projects uninterrupted, vertical lighting upwards and downwards with strength. Field curvable, it advantageously embraces the curve of the wall against which it is placed. Two times smaller than the other water resistant IP66 products, HORIZON WET FLEX is a complete luminaire that comes with four different OPTICS!LLOFOURLIGHTINGÚXTURESARETAILOR MADE THETEMPERATURECOLORANDÚNISHCANALSOBECUSTOMIZED according to your preferences.
ELECTRICAL
PHYSICAL
SOURCE AND OPTICS
INPUT
CONSTRUCTION
LIGHT SOURCE
Available from 3W/ft to 12W/ft in increments of 0.5W/ft.
EKLIPSE (/2):/.7%4&,%8 6 %. 30%#)&)#!4)/. 1
REMOTE POWER SUPPLY
6%KLIPSE03" FORo increments. 6%KLIPSE03" FOR oINCREMENTS DIMMING POWER SUPPLY
6%KLIPSE,- FORo increments. 6%KLIPSE,- FORo increments. WIRING
High thermal conductive extruded aluminium. IP66: No ingress of dust and protected against strong jets of water. LIGHT ENGINE
High power linear LEDs. LIGHT TEMPERATURE
2700K, 3000K, 3500K, +
CRI
6INCREMENTSOFo MM . 6INCREMENTSOFo MMANDMM .
TYPICAL
FINISH
OPTICS
!NODIZEDBLACK ANODIZED clear or painted white. *
HIGH CRI
TYPICAL 7°, 21°, °, °x55°.
oLENGTHM !7' wire lead. * Junction boxes and connectors not included.
IP66
APPLICATIONS
VOLTAGE A 12V system can be cut ININCREMENTSOFINCHES FORAMOREPRECISELIGHTÚT More used in vitrine of shelf applications. !6SYSTEMWILLALLOW greater distances with the same power supply and can BECUTININCREMENTSOF and 8 inches. More used in architectural applications. Increments of INCHES
Increments of INCHES
THERMAL CONTROL
Through constant thermal monitoring and current control, Eklipse intelligent BOARDTECHNOLOGY)"4 maintains optimal light levels and operating temperature preventing harmful overheating by self adjusting to its environment.
!VAILABLEFORTAILOR MADEAPPLICATION0LEASECONTACTYOUR%KLIPSEREPRESENTATIVEFORFURTHERINFORMATIONS
Increments of 8 inches
Back to index
HORIZON WET FLEX
69
CURVABLE WATER RESISTANT LINEAR LED
NOMINAL DIMENSIONS
LIGHT ENGINE
APPLICATIONS
WIDE
SURFACE GRAZING
IP66
MINIMUM CURVE RADIUS INCREMENTS
4”
120°
Y
Z X Z
X )NCREMENTSOFoORo ORMM Y oMM EKLIPSE (/2):/.7%4&,%8 6 %. 30%#)&)#!4)/. 2
MINIMUM approximative curve radius 50”
Z oMM Nominal dimensions do not include mounting options.
The Wide light engine offers a wider beam for spread effect of large surface.
EDGE LIGHTING
The Wide light engine is AVAILABLEININCREMENTSOF and 8 inches. This means THATYOUCANORDERYOURÚXTURE INORINCHMULTIPLESTOA maximum length of 72 inches. The Wide light engine runs ATVOLTSWHENUSING inch increments and runs at VOLTSWHENUSINGINCH increments.
MINIMUM approximative curve radius 100” BEND Interior bending only
#HOOSINGAINCREMENTWILL affect the minimum curve radius of the HORIZON FLEX. For a smaller radius, use the smallest increment: No exterior bending MIN. INCREMENT CURVE VOLTAGE RADIUS INCHES 50 inches 12 volts 8 inches 100 inches VOLTS
8”
Back to index
HORIZON WET FLEX
70
IP66
CURVABLE WATER RESISTANT LINEAR LED
WIDE ORDERING CODE MODEL ANATOMY OF AN EKLIPSE ORDERING CODE: MODEL
HWF
VOLTAGE
-
12V
WATTAGE/FT LIGHT ENGINE
-
HWF = 12V= 12 volts HORIZON WET 24V= 24 volts FLEX
7W 3 W 3.5 W 4 W 4.5 W 5 W 5.5 W 6 W 6.5 W 7 W 7.5 W 8 W 8.5 W 9 W 9.5 W 10 W 10.5W 11 W 11.5W 12 W
EKLIPSE (/2):/.7%4&,%8 6 %. 30%#)&)#!4)/. 3
Final Eklipse ordering code:
INSTALLATION NOTES
-
W W = Wide
LENGTH
-
68 12V 4 52 8 56 12 60 16 64 20 68 24 72 28 32 36 40 44 48
SEGMENT
24V 8 16 24 32 40 48 56 64 72
4
END CAP
-
ILCH
WIRING
-
L
OPTICS
-
21
FILM
-
NA
4 = 4 inches OLCH = Outside Leg Cap Horiz. L = Left NA = None 7 = 7° 8 = 8 inches ILCH = Inside Leg Cap Horiz. R = Right 21 = 21° 48 = 48° ISLCH= Inside Short Leg Cap H. 14x55 = 14°x55°
COLOR
-
27K 27K = 2700K 30K = 3000K 35K = 3500K 40K = 4000K CUS = Custom
FINISH
ABK
-
ABK = Anodized black ACL = Anodized clear WH = Painted white CUS = Custom
Lengths in inches. Bracket thickness not included.
HWF - 12V - 7W - W - 68 - 4 - ILCH - L - 21 - NA - 27K - ABK
WARRANTY &IVE YEARSONPARTS
APPROVAL !PPROVED#3!5,AND#% 2090 rue Moreau, Suite 100 Montréal, Qc, H1W 2M3 t.| f. e.
[email protected] w. www.EklipseLighting.com 30%#)&)#!4)/.3 -!9 6!29 7)4(/54 !,4%2).' /2 2%$5#).' 02/$5#4 0%2&/2-!.#% !,, ). &/2-!4)/. /. 4()3 $/#5-%.4 !2% 4(% 3/,% 02/0%249 /& %+,)03% 2%02/$5#4)/. /& 4()3 $/#5-%.4 ).7(/,%/2).0!24 7)4(/5472)4 4%.0%2-)33)/.)3),,%'!,
Back to index 71
V02 Eklipse © 2015
2015 / 09 / 24
Back to index 72
V02 Eklipse © 2015
2015 / 09 / 24
EKLIPSE HORIZON V - V2015 / 2 - EN - SPECIFICATION
HORIZON V LINEAR LED
Back to index 73
Back to index
HORIZON V
74
LINEAR LED
CHARACTERISTICS The HORIZON V is a linear LED of greater depth, allowing for a uniform and spotless light. HORIZON V can be used to reinterpret its environment with surface grazing with a long throw (up to 20 feet) or edge lighting.
ELECTRICAL
PHYSICAL
SOURCE AND OPTICS
INPUT Available from 3W/ft to 12W/ft in increments of 0.5W/ft.
CONSTRUCTION High thermal conductive extruded aluminium.
LIGHT SOURCE High power linear LEDs.
REMOTE POWER SUPPLY 24V: Eklipse PSB-24-100.
LIGHT ENGINE 24V: increments of 8” (203 mm).
EKLIPSE HORIZON V - V2015 / 2 - EN - SPECIFICATION 1
DIMMING POWER SUPPLY 24V: Eklipse LM-24-100. WIRING 48” length (1.2 m) - 20 AWG wire lead with WAGO quick connector. * THERMAL CONTROL Through constant thermal monitoring & current control, Eklipse intelligent board technology (IBT) maintains optimal light levels and operating temperature preventing harmful overheating by self adjusting to its environment.
ADJUSTMENT
LIGHT TEMPERATURE 2700K, 3000K, 3500K, 4000K. * OPTICS 10°x50°
Bracket option PILC allows for an on-site 30° clockwise and 30° counterclockwise pivoting adjustment. FINISH Anodized black, anodized clear and painted white. *
* Available for tailor-made application. Please contact your Eklipse representative for further informations.
APPLICATIONS
Back to index
HORIZON V
75
LINEAR LED
NOMINAL DIMENSIONS
APPLICATIONS SURFACE GRAZING
MOUNTING OPTIONS Magnetic Inserts (MI)
EDGE LIGHTING
Z GLASS
X
EKLIPSE HORIZON V - V2015 / 2 - EN - SPECIFICATION 2
Y
Inside Leg Cap Horizontal (ILCH)
X Extrusion available in lengths of 8 inches increments up to 72 inches. Y 1.125” (28.58 mm) Z 3.000” (50.80 mm)
LIGHT ENGINE WIDE
Wide beam LED for spread effect on large surface. 120°
Pivot Inside Leg Cap (PILC)
Back to index
HORIZON V
76
LINEAR LED
SPOTLESS SIGHT With its greater depth, the HORIZON V is ideal for seamless visual integrations, as LED light dots are hidden deep inside the product.
-ICROOPTICÚLM
EKLIPSE HORIZON V - V2015 / 2 - EN - SPECIFICATION 3
Light beam intersection
Back to index
HORIZON V
77
LINEAR LED
ORDERING CODE MODEL
ANATOMY OF AN EKLIPSE ORDERING CODE: MODEL
H HV = HORIZON V
VOLTAGE
-
24V
WATTAGE /FT LIGHT ENGINE
-
24V= 24 volts
7W 3 W 3.5 W 4 W 4.5 W 5 W 5.5 W 6 W 6.5 W 7 W 7.5 W 8 W 8.5 W 9 W 9.5 W 10 W 10.5W 11 W 11.5W 12 W
EKLIPSE HORIZON V - V2015 / 2 - EN - SPECIFICATION 4
Final Eklipse ordering code:
INSTALLATION NOTES
-
W W = Wide
LENGTH
-
64 24V 8 16 24 32 40 48 56 64 72
END CAP
-
WIRING
MI
-
= Magnetic Insert MI ILCH = Inside Leg Cap Horiz. PILC = Pivot Inside Leg Cap
L
OPTICS
-
10X50
FILM
-
COLOR
SD
-
10x50 = 10°x50° SD = Shape diffuser L = Left R = Right
27K 27K = 2700K 30K = 3000K 35K = 3500K 40K = 4000K CUS = Custom
FINISH
ABK
-
ABK = Anodized black ACL = Anodized clear WH = Painted white CUS = Custom
Lengths in inches. Bracket thickness not included.
HV - 24V - 7W - W - 64 - MI - L - 10X50 - SD - 27K - ABK
WARRANTY Five (5) years on parts.
APPROVAL Approved CSA/UL and CE. 2090 rue Moreau, Suite 100 Montréal, Qc, H1W 2M3 t. 514.590.0099 | f. 514.590.0098 e.
[email protected] w. www.EklipseLighting.com SPECIFICATIONS MAY VARY, WITHOUT ALTERING OR REDUCING PRODUCT PERFORMANCE. ALL INFORMATION ON THIS DOCUMENT ARE THE SOLE PROPERTY OF EKLIPSE. REPRODUCTION OF THIS DOCUMENT, IN WHOLE OR IN PART, WITHOUT WRITTEN PERMISSION IS ILLEGAL.
Back to index 78
V02 Eklipse © 2015
2015 / 09 / 24
EKLIPSE HORIZON CONTOUR - V2015 / 3 - EN - SPECIFICATION
HORIZON CONTOUR
ADJUSTABLE LINEAR LED
Back to index 79
HORIZON CONTOUR
Back to index
ADJUSTABLE LINEAR LED
CHARACTERISTICS Compact yet very effective, HORIZON CONTOUR is a linear LED system made of high-grade extruded aluminum. It is available with a various choice of optics and lenses to provide incomparable control of light intensity and quantity. Offering a wide range of beams, HORIZON CONTOUR ISSPECIÚCALLYCREATEDFORPRECISIONLIGHTINGBYALLOWINGTILTANDCURVEADJUSTMENT OPTIMIZINGTHELIGHT produced into the unique installation environment.
APPLICATIONS
ELECTRICAL
PHYSICAL
SOURCE AND OPTICS
INPUT
CONSTRUCTION
LIGHT SOURCE
REMOTE POWER SUPPLY
LIGHT ENGINE
LIGHT TEMPERATURE
VOLTAGE A 12V system can be cut in increments of 4 inches FORAMOREPRECISELIGHTÚT More used in vitrine or shelf applications.
EKLIPSE HORIZON CONTOUR - V2015 / 3 - EN - SPECIFICATION 1
Available from 3W/ft to 12W/ft in increments of 0.5W/ft. 12V: Eklipse PSB-12-60. 24V: Eklipse PSB-24-100.
DIMMING POWER SUPPLY
12V: Eklipse LM-12-60. 24V: Eklipse LM-24-100. WIRING
48” length (1.2 m) - 20 AWG wire lead with WAGO quick connector. * THERMAL CONTROL
Through constant thermal monitoring and current control, Eklipse intelligent board technology (IBT) maintains optimal light levels and operating temperature preventing harmful OVERHEATINGBYSELFADJUSTING to its environment.
High thermal conductive extruded aluminium. 12V: increments of 4” (102 mm). 24V: increments of 4” and 8” (102 mm and 203 mm). ADJUSTMENT
The peculiar bracket allows an on-site curvature as well as tilt ADJUSTMENT EXTERIORAND INTERIOR
High power linear LEDs or mid power linear LEDs. 2700K, 3000K, 3500K, 4000K. * CRI
85 (typical). HIGH CRI
A 24V system will allow greater distances with the same power supply and can be cut in increments of 4 and 8 inches. More used in architectural applications.
TYPICAL OPTICS
10°, 27° °, 10°x50°.
Increments of 4 inches
FINISH
!NODIZEDBLACK ANODIZED clear or painted white. *
* Available for tailor-made application. Please contact your Eklipse representative for further informations.
Increments of 8 inches
80
HORIZON CONTOUR
Back to index
ADJUSTABLE LINEAR LED
NOMINAL DIMENSIONS
ADJUSTMENTS
X
CURVE ADJUSTMENT
Site curvable every 4 or 8 inches, for precision positioning along a curved surface.
W
Z
Y
W 0.130” (3.30 mm)
EKLIPSE HORIZON CONTOUR - V2015 / 3 - EN - SPECIFICATION 2
X Extrusion in increments of 4” or 8”. Y 2.000” (50.80 mm) Z 1.750” (44.45 mm) Nominal dimensions do not include mounting options.
TILT ADJUSTMENT
/N SITETILTADJUSTMENT EXTERIORANDINTERIOR FOR ideally aiming the beam to a perpendicular surface.
81
HORIZON CONTOUR
Back to index
ADJUSTABLE LINEAR LED
LIGHT ENGINE FOCUS
Narrow beam for a more focus application of light. Can only ACCOMODATEÚLMS
WIDE
EKLIPSE HORIZON CONTOUR - V2015 / 3 - EN - SPECIFICATION 3
Wide beam LED for spread effect on large surface. Can accomodate both optics and ÚLMS
SEGMENTS LENGTH A 12V system offers a smaller curve radius because it is composed of segments of 4”. It is more used in vitrine, in SHELFAPPLICATIONSORINPROJECTS requiring a smaller turn radius.
MINIMUM approximative curve radius: 35”.
MILD BLEND
Wider beam with smaller LED gaps for little scalloping effect. #ANONLYACCOMODATEÚLMS
PERFECT BLEND
Wider beam with smaller LED gaps for no-scalloping effect. #ANONLYACCOMODATEÚLMS
MINIMUM approximative curve radius: 70”.
A 24V system will allow greater distances with the same power supply and offers a wider turn radius using segments of 8” in addition to those of 4”. More used in architectural applications.
82
Back to index
HORIZON CONTOUR
83
ADJUSTABLE LINEAR LED
FOCUS ORDERING CODE MODEL ANATOMY OF AN EKLIPSE ORDERING CODE: MODEL
HC
VOLTAGE
-
HC = HORIZON CONTOUR
12V
WATTAGE /FT LIGHT ENGINE
-
7W
-
3 W 3.5 W 4 W 4.5 W 5 W 5.5 W 6 W 6.5 W 7 W 7.5 W 8 W 8.5 W 9 W 9.5 W 10 W 10.5W 11 W 11.5W 12 W
12V= 12 volts 24V= 24 volts
LENGTH
-
68 12V 4 52 8 56 12 60 16 64 20 68 24 72 28 32 36 40 44 48
F = Focus
SEGMENT
24V 8 16 24 32 40 48 56 64 72
4
WIRING
-
4 = 4 inches 8 = 8 inches
L
OPTICS
-
NA NA
L = Left R = Right
FILM
FF
CF FF LF NA
= None
COLOR
-
27K
FINISH
-
27K = 2700K 30K = 3000K 35K = 3500K 40K = 4000K CUS = Custom
= Clear Film = Frosted Film = Linear Optical Film = None
ABK ABK = Anodized black ACL = Anodized clear WH = Painted white CUS = Custom
Lengths in inches. Bracket thickness not included.
HC - 12V - 7W - F - 68 - 4 - L - NA - FF - 27K - ABK
Final Eklipse ordering code:
EKLIPSE HORIZON CONTOUR - V2015 / 3 - EN - SPECIFICATION 4
F
WIDE ORDERING CODE MODEL ANATOMY OF AN EKLIPSE ORDERING CODE: MODEL
HC HC = HORIZON CONTOUR
VOLTAGE
-
12V
WATTAGE /FT LIGHT ENGINE
-
12V= 12 volts 24V= 24 volts
Final Eklipse ordering code:
7W 3 W 3.5 W 4 W 4.5 W 5 W 5.5 W 6 W 6.5 W 7 W 7.5 W 8 W 8.5 W 9 W 9.5 W 10 W 10.5W 11 W 11.5W 12 W
-
W W = Wide
LENGTH
-
68 12V 4 52 8 56 12 60 16 64 20 68 24 72 28 32 36 40 44 48
SEGMENT
24V 8 16 24 32 40 48 56 64 72
4 4 = 4 inches 8 = 8 inches
WIRING
-
L L = Left R = Right
Lengths in inches. Bracket thickness not included.
HC - 12V - 7W - W - 68 - 4 - L - 10 - CF - 27K - ABK
OPTICS
-
10 10 27 49 10x50 NA
= 10° = 27° = 49° = 10°x50° = None
FILM
-
CF CF FF LF NA
= Clear Film = Frosted Film = Linear Optical Film = None
COLOR
-
27K 27K = 2700K 30K = 3000K 35K = 3500K 40K = 4000K CUS = Custom
FINISH
-
ABK ABK = Anodized black ACL = Anodized clear WH = Painted white CUS = Custom
Back to index
HORIZON CONTOUR
84
ADJUSTABLE LINEAR LED
MILD BLEND AND PERFECT BLEND ORDERING CODE MODEL ANATOMY OF AN EKLIPSE ORDERING CODE: MODEL
H HC = HORIZON CONTOUR
VOLTAGE
-
24V
WATTAGE /FT LIGHT ENGINE
-
24V= 24 volts
7W 3 3.5 4 4.5 5 5.5 6 6.5 7 7.5
W W W W W W W W W W
B MB = Mild Blend (Up to 5.5 w/ft)
B
= Perfect Blend
LENGTH
-
64 4 8 12 16 20 24 28 32 36 40 44 48
52 56 60 64 68 72
SEGMENT
8 16 24 32 40 48 56 64 72
4 4 = 4 inches 8 = 8 inches
WIRING
-
L L = Left R = Right
OPTICS
-
NA NA
= None
FILM
FF
CF FF LF NA
= Clear Film = Frosted Film = Linear Optical Film = None
COLOR
-
27K 27K = 2700K 30K = 3000K 35K = 3500K 40K = 4000K CUS = Custom
FINISH
ABK
-
ABK = Anodized black ACL = Anodized clear WH = Painted white CUS = Custom
Lengths in inches. Bracket thickness not included.
EKLIPSE HORIZON CONTOUR - V2015 / 3 - EN - SPECIFICATION 5
Final Eklipse ordering code:
INSTALLATION NOTES
H - 24V - 7W - B - 64 - PILC - L - NA - FF - 27K - ABK
WARRANTY Five (5) years on parts.
APPROVAL Approved CSA/UL and CE. RUE-OREAU 3UITE Montréal, Qc, H1W 2M3 t.| f. e.
[email protected] w. www.EklipseLighting.com SPECIFICATIONS MAY VARY, WITHOUT ALTERING OR REDUCING PRODUCT PERFORMANCE. ALL INFORMATION ON THIS DOCUMENT ARE THE SOLE PROPERTY OF EKLIPSE. REPRODUCTION OF THIS DOCUMENT, IN WHOLE OR IN PART, WITHOUT WRITTEN PERMISSION IS ILLEGAL.
Back to index 85
V02 Eklipse © 2015
2015 / 09 / 24
Back to index 86
V02 Eklipse © 2015
2015 / 09 / 24
Back to index 87
HORIZON MINI FAMILY V02 Eklipse © 2015
2015 / 09 / 24
Back to index 88
V02 Eklipse © 2015
2015 / 09 / 24
EKLIPSE HORIZON MINI - V2015 / 5 - EN - SPECIFICATION
HORIZON MINI
LINEAR LED
Back to index 89
Back to index
HORIZON MINI
90
LINEAR LED
CHARACTERISTICS Although more compact, HORIZON MINI has the same configuration options as HORIZON. With integration of optics, versatile design, and a large number of light-beam options, HORIZON MINI is small in name only and responds to your needs for, general lighting, highlighting, surface grazing, and many other applications. Offered with a wide variety of accessories, films, and configurations, HORIZON MINI is tailor-made for every detail of your project.
APPLICATIONS
ELECTRICAL
PHYSICAL
SOURCE AND OPTICS
INPUT
CONSTRUCTION
LIGHT SOURCE
REMOTE POWER SUPPLY
LIGHT ENGINE
LIGHT TEMPERATURE
VOLTAGE A 12V system can be cut in increments of 4 inches FORAMOREPRECISELIGHTÚT More used in vitrine of shelf applications.
Available from 3W/ft to 7.5W/ft in increments of 0.5W/ft. 12V: Eklipse PSB-12-60. 24V: Eklipse PSB-24-100. EKLIPSE HORIZON MINI - V2015 / 5 - EN - SPECIFICATION 1
DIMMING POWER SUPPLY
12V: Eklipse LM-12-60. 24V: Eklipse LM-24-100. WIRING
48” length (1.2 m) - 20 AWG wire lead with WAGO quick connector. * THERMAL CONTROL
Through constant thermal monitoring and current control, Eklipse intelligent board technology (IBT) maintains optimal light levels and operating temperature preventing harmful overheating by self adjusting to its environment.
High thermal conductive extruded aluminium. 12V: increments of 4” (102 mm). 24V: increments of 8” (203 mm). ADJUSTMENT
Bracket option PILC allows for an on-site 108° clockwise pivoting and 87° anticlockwise pivoting adjustment. Other anchorings available for different integrations.
High power linear LEDs or mid power linear LEDs. 2700K, 3000K, 3500K, 4000K. * CRI
85 (typical). HIGH CRI
A 24V system will allow greater distances with the same power supply but can only be cut in increments of 8 inches. More used in architectural applications.
95 (typical). OPTICS
18°, 25°, 36°, 74°, 19°x48°.
FINISH
Anodized black, anodized clear or painted white. *
* Available for tailor-made application. Please contact your Eklipse representative for further informations.
Increments of 4 inches
Increments of 8 inches
Back to index
HORIZON MINI
91
LINEAR LED
NOMINAL DIMENSIONS
APPLICATIONS
LIGHT ENGINE
SURFACE GRAZING
WIDE
MOUNTING OPTIONS
Wide beam LED for spread effect on large surface. 120°
Z
Outside Leg Cap Horizontal (OLCH)
Outside Leg Cap Vertical (OLCV)
Inside Short Leg Cap Horizontal (ISLCH)
Inside Short Leg Cap Vertical (ISLCV)
Inside Leg Cap Horizontal (ILCH)
Inside Leg Cap Vertical (ILCV)
Pivot Inside Leg Cap (PILC)
Magnetic Insert & Straight Cap (MI)
X Y X Extrusion available various lengths up to 72” (refer to ordering code).
EDGE LIGHTING MILD BLEND
Wider beam with smaller LED gaps for little scalloping effect. 120°
Y 0.75” (19.05 mm)
EKLIPSE HORIZON MINI - V2015 / 5 - EN - SPECIFICATION 2
Z 0.75” (19.05 mm) Nominal dimensions do not include mounting options. PERFECT BLEND
Wider beam with smaller LED gaps for no-scalloping effect. 120°
Back to index
HORIZON MINI
92
LINEAR LED
WIDE ORDERING CODE MODEL ANATOMY OF AN EKLIPSE ORDERING CODE: MODEL
HM
VOLTAGE
-
HM = HORIZON MINI
12V
WATTAGE /FT LIGHT ENGINE
-
7W 3 3.5 4 4.5 5 5.5 6 6.5 7 7.5
12V= 12 volts 24V= 24 volts
W W W W W W W W W W
W
LENGTH
-
68 12V 4 52 8 56 12 60 16 64 20 68 24 72 28 32 36 40 44 48
W = Wide
END CAP
-
PILC
WIRING
-
L
OPTICS
-
MI = Magnetic Insert L = Left OLCH = Outside Leg Cap Horiz. R = Right OLCV = Outside Leg Cap Vertical ILCH = Inside Leg Cap Horiz. ILCV = Inside Leg Cap Vertical ISLCH = In. Short Leg Cap Horiz. ISLCV = In. Short Leg Cap Vertical PILC = Pivot Inside Leg Cap
24V 8 16 24 32 40 48 56 64 72
18 18 25 36 74 19x48 NA
FILM
-
NA
COLOR
-
CF = Clear Film FF = Frosted Film LF = Linear Optical Film NA = None
= 18° = 25° = 36° = 74° = 19°x48° = None
27K
FINISH
-
27K = 2700K 30K = 3000K 35K = 3500K 40K = 4000K CUS = Custom
ABK ABK = Anodized black ACL = Anodized clear WH = Painted white CUS = Custom
Lengths in inches. Bracket thickness not included.
HM - 12V - 7W - W - 68 - PILC - L - 18 - NA - 27K - ABK
EKLIPSE HORIZON MINI - V2015 / 5 - EN - SPECIFICATION 3
Final Eklipse ordering code:
MILD BLEND AND PERFECT BLEND ORDERING CODE MODEL ANATOMY OF AN EKLIPSE ORDERING CODE: MODEL
HM HM = HORIZON MINI
VOLTAGE
-
24V
WATTAGE /FT LIGHT ENGINE
-
24V= 24 volts
7W 3 3.5 4 4.5 5 5.5 6 6.5 7 7.5
W W W W W W W W W W
B MB = Mild Blend (Up to 5.5 w/ft)
B = Perfect Blend
LENGTH
-
64 8 16 24 32 40 48 56 64 72
END CAP
-
PILC
L
OPTICS
-
NA
MI = Magnetic Insert L = Left NA = None OLCH = Outside Leg Cap Horiz. R = Right OLCV = Outside Leg Cap Vertical ILCH = Inside Leg Cap Horiz. ILCV = Inside Leg Cap Vertical ISLCH = In. Short Leg Cap Horiz. ISLCV = In. Short Leg Cap Vertical PILC = Pivot Inside Leg Cap
Lengths in inches. Bracket thickness not included.
Final Eklipse ordering code:
WIRING
-
HM - 24V - 7W - B - 64 - PILC - L - NA - FF - 27K - ABK
FILM
-
FF CF = Clear Film FF = Frosted Film LF = Linear Optical Film NA = None
COLOR
-
27K 27K = 2700K 30K = 3000K 35K = 3500K 40K = 4000K CUS = Custom
FINISH
-
ABK ABK = Anodized black ACL = Anodized clear WH = Painted white CUS = Custom
Back to index
HORIZON MINI
93
EKLIPSE HORIZON MINI - V2015 / 5 - EN - SPECIFICATION 4
LINEAR LED
INSTALLATION NOTES
WARRANTY Five (5) years on parts.
APPROVAL Approved CSA/UL and CE. 2090 rue Moreau, Suite 100 Montréal, Qc, H1W 2M3 t. 514.590.0099 | f. 514.590.0098 e.
[email protected] w. www.EklipseLighting.com SPECIFICATIONS MAY VARY, WITHOUT ALTERING OR REDUCING PRODUCT PERFORMANCE. ALL INFORMATION ON THIS DOCUMENT ARE THE SOLE PROPERTY OF EKLIPSE. REPRODUCTION OF THIS DOCUMENT, IN WHOLE OR IN PART, WITHOUT WRITTEN PERMISSION IS ILLEGAL.
Back to index 94
V02 Eklipse © 2015
2015 / 09 / 24
EKLIPSE HORIZON FLEX - V2015 / 1 - EN - SPECIFICATION
HORIZON MINI FLEX
CURVABLE LINEAR LED
Back to index 95
Back to index
HORIZON MINI FLEX
96
CURVABLE LINEAR EAR L LED ED
CHARACTERISTICS Compact yet very effective, HORIZON MINI FLEX is a curvable linear LED system made of highgrade extruded aluminum. It is available with optics and lenses that provide incomparable control of light intensity and quantity. HORIZON MINI FLEX is totally customizable and a perfect response TOTHESPECIÚCNEEDSOFCOMMERCIAL INSTITUTIONAL ANDPRIVATESPACES4HEINCREMENTSALLOWYOUTO curve on-site the HORIZON MINI FLEX, for no visible light interruption. It can be used to reinterpret its environment with surface grazing with a long throw or edge lighting.
APPLICATIONS
ELECTRICAL
PHYSICAL
SOURCE AND OPTICS
INPUT
CONSTRUCTION
LIGHT SOURCE
REMOTE POWER SUPPLY
LIGHT ENGINE
LIGHT TEMPERATURE
VOLTAGE A 12V system can be cut in increments of 4 inches FORAMOREPRECISELIGHTÚT More used in vitrine of shelf applications.
EKLIPSE HORIZON MINI FLEX - V2015 / 1 - EN - SPECIFICATION 1
Available from 3W/ft to 7.5W/ft in increments of 0.5W/ft. 12V: Eklipse PSB-12-60. 24V: Eklipse PSB-24-100.
DIMMING POWER SUPPLY
12V: Eklipse LM-12-60. 24V: Eklipse LM-24-100. WIRING
48” length (1.2 m) - 20 AWG wire lead with WAGO quick connector. *
High thermal conductive extruded aluminium. 12V: increments of 4” (102 mm). 24V: increments of 2” (51 mm), 4” (102 mm) and 8” (203 mm). FINISH
Anodized black, anodized clear or painted white. *
High power linear LEDs or mid power linear LEDs. 2700K, 3000K, 3500K, 4000K. * CRI
85 (typical). HIGH CRI
A 24V system will allow greater distances with the same power supply but can only be cut in increments of 2 or 8 inches. More used in architectural applications.
95 (typical). OPTICS
18°, 25°, 36°, 74°, 19°x48°.
Increments of 4 inches
THERMAL CONTROL
Through constant thermal monitoring and current control, Eklipse intelligent board technology (IBT) maintains optimal light levels and operating temperature preventing harmful overheating by self adjusting to its environment.
Increments of 2 inches
Increments of 4 inches
Increments of 8 inches
* Available for tailor-made application. Please contact your Eklipse representative for further informations.
HORIZON MINI FLEX
Back to index 97
CURVABLE LINEAR LED
NOMINAL DIMENSIONS
APPLICATIONS
BEND
MINIMUM CURVE RADIUS INCREMENTS
SURFACE GRAZING
Interior bending
Z
X
EDGE LIGHTING
EKLIPSE HORIZON MINI FLEX - V2015 / 1 - EN - SPECIFICATION 2
X Increments of 2”, 4” or 8” (51, 101 or 203 mm). Y 0.150” (3.81 mm) Z 0.75” (19.05 mm) Nominal dimensions do not include mounting options.
MINIMUM approximative curve radius 12” MINIMUM approximative curve radius 24”
Y
Z
2” 4” 8”
Exterior bending
MINIMUM approximative curve radius 48”
HORIZON MINI FLEX CURVABLE LINEAR LED
WIDE
120°
MILD BLEND
PERFECT BLEND
120°
EKLIPSE HORIZON MINI FLEX - V2015 / 1 - EN - SPECIFICATION 3
120°
The Wide light engine offers a wider beam for spread effect of large surface.
The Mild Blend offers a large beam and smaller distance between LEDs reducing spotting effect.
The Perfect Blend offers a large beam and a microscopic distance between LEDs almost eliminating the spot effect.
INCREMENTS AND VOLTAGE
INCREMENTS AND VOLTAGE
INCREMENTS AND VOLTAGE
The Wide light engine runs at 12 volts when using 4 inch increments and runs at 24 volts when using 8 inch increments.
No matter what increment you choose, the Mild Blend light engine runs at 24 volts.
No matter what increment you choose, the Perfect Blend light engine runs at 24 volts.
Choosing a increment will affect the minimum curve radius of the HORIZON MINI FLEX. For a smaller radius, use the smallest increment:
Choosing a increment will affect the minimum curve radius of the HORIZON MINI FLEX. For a smaller radius, use the smallest increment:
The Wide light engine is available in increments of 4 and 8 inches. This means THATYOUCANORDERYOURÚXTURE in 4 or 8 inch multiples to a maximum length of 72 inches.
Choosing a increment will affect the minimum curve radius of the HORIZON MINI FLEX. For a smaller radius, use the smallest increment:
INCREMENT 4 inches 8 inches
MIN. CURVE VOLTAGE RADIUS 24 inches 12 volts 48 inches 24 volts
The Mild Blend light engine is available in increments of 2, 4 and 8 inches. This means THATYOUCANORDERYOURÚXTURE in 2, 4 or 8 inch multiples to a maximum length of 72 inches.
INCREMENT 2 inches 4 inches 8 inches
MIN. CURVE VOLTAGE RADIUS 12 inches 24 volts 24 inches 24 volts 48 inches 24 volts
The Perfect Blend light engine is available in increments of 2, 4 and 8 inches. This means THATYOUCANORDERYOURÚXTURE in 2, 4 or 8 inch multiples to a maximum length of 72 inches.
INCREMENT 2 inches 4 inches 8 inches
MIN. CURVE VOLTAGE RADIUS 12 inches 24 volts 24 inches 24 volts 48 inches 24 volts
Back to index 98
Back to index
HORIZON MINI FLEX
99
CURVABLE LINEAR LED
WIDE ORDERING CODE MODEL ANATOMY OF AN EKLIPSE ORDERING CODE: MODEL
HMF
VOLTAGE
-
HMF = HORIZON MINI FLEX
12V
WATTAGE /FT LIGHT ENGINE
-
7W 3 3.5 4 4.5 5 5.5 6 6.5 7 7.5
12V= 12 volts 24V= 24 volts
W W W W W W W W W W
W
LENGTH
-
12V 4 52 8 56 12 60 16 64 20 68 24 72 28 32 36 40 44 48
W = Wide
SEGMENT
68
24V 8 16 24 32 40 48 56 64 72
4
END CAP
-
MI
WIRING
-
MI = Magnetic Insert
4 = 4 inches 8 = 8 inches
L
OPTICS
-
18
L = Left 18 R = Right 25 36 74 19x48 NA
FILM
-
CF
COLOR
-
CF = Clear Film FF = Frosted Film LF = Linear Optical Film
= 18° = 25° = 36° = 74° = 19°x48° = None
27K
FINISH
-
27K = 2700K 30K = 3000K 35K = 3500K 40K = 4000K CUS = Custom
NA = None
ABK ABK = Anodized black ACL = Anodized clear WH = Painted white CUS = Custom
Lengths in inches. Bracket thickness not included.
HMF - 12V - 7W - W - 68 - 4 - MI - L - 18 - CF - 27K - ABK
EKLIPSE HORIZON MINI FLEX - V2015 / 1 - EN - SPECIFICATION 4
Final Eklipse ordering code:
MILD BLEND AND PERFECT BLEND ORDERING CODE MODEL ANATOMY OF AN EKLIPSE ORDERING CODE: MODEL
HMF HMF = HORIZON MINI FLEX
VOLTAGE
-
24V
WATTAGE /FT LIGHT ENGINE
-
24V= 24 volts
7W 3 3.5 4 4.5 5 5.5 6 6.5 7 7.5
W W W W W W W W W W
B B = Perfect Blend MB = Mild Blend (Up to 5.5 w/ft)
LENGTH
-
64 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30
32 34 36 38 40 42 44 46 48 50 52 54 56 58 60
SEGMENT
62 64 66 68 70 72
8 2 = 2 inches 4 = 4 inches 8 = 8 inches
END CAP
-
MI MI = Magnetic Insert
Lengths in inches. Bracket thickness not included.
Final Eklipse ordering code:
HMF - 24V - 7W - B - 64 - 8 - MI - L - NA - FF - 27K - ABK
WIRING
-
L L = Left R = Right
OPTICS
-
NA NA = None
FILM
-
FF CF = Clear Film FF = Frosted Film LF = Linear Optical Film NA = None
COLOR
-
27K 27K = 2700K 30K = 3000K 35K = 3500K 40K = 4000K CUS = Custom
FINISH
-
ABK ABK = Anodized black ACL = Anodized clear WH = Painted white CUS = Custom
HORIZON MINI FLEX
Back to index
EKLIPSE HORIZON MINI FLEX - V2015 / 1 - EN - SPECIFICATION 5
CURVABLE LINEAR LED
INSTALLATION NOTES
WARRANTY Five (5) years on parts.
APPROVAL Approved CSA/UL and CE. 2090 rue Moreau, Suite 100 Montréal, Qc, H1W 2M3 t. 514.590.0099 | f. 514.590.0098 e.
[email protected] w. www.EklipseLighting.com SPECIFICATIONS MAY VARY, WITHOUT ALTERING OR REDUCING PRODUCT PERFORMANCE. ALL INFORMATION ON THIS DOCUMENT ARE THE SOLE PROPERTY OF EKLIPSE. REPRODUCTION OF THIS DOCUMENT, IN WHOLE OR IN PART, WITHOUT WRITTEN PERMISSION IS ILLEGAL.
100
Back to index 101
V02 Eklipse © 2015
2015 / 09 / 24
Back to index 102
V02 Eklipse © 2015
2015 / 09 / 24
Back to index
HORIZON MINI WET
EKLIPSE HORIZON MINI WET - V2015 / 7 - EN - SPECIFICATION
SUBMERSIBLE LINEAR LED
103
IP68
HORIZON MINI WET SUBMERSIBLE LINEAR LED
104
IP68
CHARACTERISTICS Although more compact, HORIZON MINI WET has the same configuration options as HORIZON WET. With integration of optics, versatile design, HORIZON MINI WET is small in name only and responds to your needs for, general lighting, highlighting, surface grazing, and many other applications. Offered with a wide variety of accessories, films, and configurations, HORIZON MINI WET is tailor-made for every detail of your project.
APPLICATIONS
ELECTRICAL
PHYSICAL
SOURCE AND OPTICS
INPUT
CONSTRUCTION
LIGHT SOURCE
VOLTAGE A 12V system can be cut in increments of 4 inches FORAMOREPRECISELIGHTÚT More used in vitrine of shelf applications.
Available from 3W/ft to 7.5W/ft in increments of 0.5W/ft. REMOTE POWER SUPPLY
12V: Eklipse PSB-12-60. 24V: Eklipse PSB-24-100. EKLIPSE HORIZON MINI WET - V2015 / 7 - EN - SPECIFICATION 1
Back to index
DIMMING POWER SUPPLY
12V: Eklipse LM-12-60. 24V: Eklipse LM-24-100. WIRING
48” length (1.2 m) - 20 AWG wire lead with WAGO quick connector. * THERMAL CONTROL
Through constant thermal monitoring and current control, Eklipse intelligent board technology (IBT) maintains optimal light levels and operating temperature preventing harmful overheating by self adjusting to its environment.
High thermal conductive extruded aluminium. Epoxy resin inlay. IP68: No ingress of dust and protected against continuous SUBMERSIONATASPECIÚED depth. LIGHT ENGINE
12V: increments of 4” (102 mm). 24V: increments of 8” (203 mm). ADJUSTMENT
High and mid power linear LEDs. LIGHT TEMPERATURE
2700K, 3000K, 3500K, 4000K. * CRI
85 (typical). HIGH CRI
A 24V system will allow greater distances with the same power supply but can only be cut in increments of 8 inches. More used in architectural applications.
95 (typical). OPTICS
13°, 10°x50°.
Bracket option PILC allows for an on-site 108° clockwise pivoting and 87° anticlockwise pivoting adjustment. Other anchorings available for different integrations. FINISH
Anodized black, anodized clear or painted white. *
* Available for tailor-made application. Please contact your Eklipse representative for further informations.
Increments of 4 inches
Increments of 8 inches
HORIZON MINI WET SUBMERSIBLE LINEAR LED
NOMINAL DIMENSIONS
APPLICATIONS
LIGHT ENGINE
SURFACE GRAZING
WIDE
105
IP68
MOUNTING OPTIONS
Wide beam LED for spread effect on large surface. 120°
120°
Z
Back to index
Outside Leg Cap Horizontal (OLCH)
Outside Leg Cap Vertical (OLCV)
X Y
X Extrusion available in various lengths up to 72” (refer to ordering code). Y 0.75” (19.05 mm)
EDGE LIGHTING
MILD BLEND
Wider beam with smaller LED gaps for little scalloping effect.
Inside Short Leg Cap Horizontal (ISLCH)
Inside Short Leg Cap Vertical (ISLCV)
Inside Leg Cap Horizontal (ILCH)
Inside Leg Cap Vertical (ILCV)
120°
EKLIPSE HORIZON MINI WET - V2015 / 7 - EN - SPECIFICATION 2
Z 0.75” (19.05 mm) Nominal dimensions do not include mounting options. PERFECT BLEND
Wider beam with smaller LED gaps for no-scalloping effect. 120° Pivot Inside Leg Cap (PILC)
Back to index
HORIZON MINI WET
106
IP68
SUBMERSIBLE LINEAR LED
WIDE ORDERING CODE MODEL ANATOMY OF AN EKLIPSE ORDERING CODE: MODEL
HMW
VOLTAGE
-
12V
WATTAGE /FT LIGHT ENGINE
-
7W 3 3.5 4 4.5 5 5.5 6 6.5 7 7.5
HMW = 12V= 12 volts HORIZON MINI 24V= 24 volts WET
W W W W W W W W W W
W
LENGTH
-
68 12V 4 52 8 56 12 60 16 64 20 68 24 72 28 32 36 40 44 48
W = Wide
END CAP
24V 8 16 24 32 40 48 56 64 72
PILC
WIRING
-
L
OPTICS
-
13
FILM
-
NA
COLOR
-
NA = None 13 = 13° L = Left OLCH = Outside Leg Cap Horizontal R = Right 10x50 = 10°x50° OLCV = Outside Leg Cap Vertical ILCH = Inside Leg Cap Horizontal ILCV = Inside Leg Cap Vertical ISLCH = Inside Short Leg Cap Horizontal ISLCV = Inside Short Leg Cap Vertical PILC = Pivot Inside Leg Cap
27K
FINISH
-
27K = 2700K 30K = 3000K 35K = 3500K 40K = 4000K CUS = Custom
ABK ABK = Anodized black ACL = Anodized clear WH = Painted white CUS = Custom
Lengths in inches. Bracket thickness not included.
HMW - 12V - 7W - W - 68 - PILC - L - 30 - NA - 27K - ABK
EKLIPSE HORIZON MINI WET - V2015 / 7 - EN - SPECIFICATION 3
Final Eklipse ordering code:
MILD BLEND AND PERFECT BLEND ORDERING CODE MODEL ANATOMY OF AN EKLIPSE ORDERING CODE: MODEL
HMW
VOLTAGE
-
24V
24V= 24 volts HMW = HORIZON MINI WET
WATTAGE /FT LIGHT ENGINE
-
7W 3 3.5 4 4.5 5 5.5 6 6.5 7 7.5
W W W W W W W W W W
B MB = Mild Blend (Up to 5.5 w/ft)
B = Perfect Blend
LENGTH
-
64 24V 8 16 24 32 40 48 56 64 72
END CAP
-
PILC
L
OPTICS
-
NA
NA = None OLCH = Outside Leg Cap Horizontal L = Left OLCV = Outside Leg Cap Vertical R = Right ILCH = Inside Leg Cap Horizontal ILCV = Inside Leg Cap Vertical ISLCH = Inside Short Leg Cap Horizontal ISLCV = Inside Short Leg Cap Vertical PILC = Pivot Inside Leg Cap
Lengths in inches. Bracket thickness not included.
Final Eklipse ordering code:
WIRING
-
HMW - 24V - 7W - B - 64 - PILC - L - NA - NA - 27K - ABK
FILM
-
NA NA = None
COLOR
-
27K 27K = 2700K 30K = 3000K 35K = 3500K 40K = 4000K CUS = Custom
FINISH
-
ABK ABK = Anodized black ACL = Anodized silver WH = Painted white CUS = Custom
HORIZON MINI WET
EKLIPSE HORIZON MINI WET - V2015 / 7 - EN - SPECIFICATION 4
SUBMERSIBLE LINEAR LED
INSTALLATION NOTES
WARRANTY Five (5) years on parts.
Back to index 107
IP68
APPROVAL Approved CSA/UL and CE. 2090 rue Moreau, Suite 100 Montréal, Qc, H1W 2M3 t. 514.590.0099 | f. 514.590.0098 e.
[email protected] w. www.EklipseLighting.com SPECIFICATIONS MAY VARY, WITHOUT ALTERING OR REDUCING PRODUCT PERFORMANCE. ALL INFORMATION ON THIS DOCUMENT ARE THE SOLE PROPERTY OF EKLIPSE. REPRODUCTION OF THIS DOCUMENT, IN WHOLE OR IN PART, WITHOUT WRITTEN PERMISSION IS ILLEGAL.
Back to index 108
V02 Eklipse © 2015
2015 / 09 / 24
Back to index 109
SPECIFIC USE FAMILY V02 Eklipse © 2015
2015 / 09 / 24
Back to index 110
V02 Eklipse © 2015
2015 / 09 / 24
EKLIPSE EDGE - V2015 / 2 - EN - SPECIFICATION 1
EDGE
TILTABLE LINEAR LED
Back to index 111
Back to index
EDGE
112
TILTABLE LINEAR LED D
CHARACTERISTICS EDGE is an adjustable LED linear luminaire primarily used for vaulted surfaces. Its distinctive pivoting mechanism was developed for improving lighting control in atypical environments such as stairs or vaulted ceilings. With one simple movement, you can align, by directing all light beams together, your LIGHTPERFECTLYPERPENDICULARTOTHEÛOOR)TSGREATADVANTAGEALSOLIESINTHEFACTTHATEACHINCREMENT can be separately adjustable, thus allowing for customized lighting effects. EDGE is composed of six high-power LEDs in an aluminum linear extrusion with an integrated heat sink. Field adjustable it is set up directly onsite, thanks to a wheel which is easy to reach at all times. This characteristic gives the possibility to adjust the tilt angle up to 45°, both to the left and to the right.
ELECTRICAL
PHYSICAL
SOURCE AND OPTICS
INPUT Available from 3W/ft to 12W/ft in increments of 0.5W/ft.
CONSTRUCTION High thermal conductive extruded aluminum, forged aluminium heatsink and pivot mechanism in steel and aluminium.
LIGHT SOURCE High power LEDs.
REMOTE POWER SUPPLY 24V: Eklipse PSB-24-100.
EKLIPSE EDGE - V2015 / 2 - EN - SPECIFICATION 1
WIRING 48” length (1.2 m) - 18 AWG wire lead with WAGO quick connector. THERMAL CONTROL Through constant thermal monitoring and current control, Eklipse intelligent board technology (IBT) maintains optimal light levels and operating temperature preventing harmful overheating by self adjusting to its environment.
LIGHT ENGINE High powered LED mounted on MCPCB, high performance aluminium forged pin heat sink. Secondary TIR optic.
LIGHT TEMPERATURE 2700K, 3000K, 3500K, 4000K. * OPTICS 10°, 27°, 49°, 10°x50°.
ADJUSTMENT 45° light angle adjustment, from linked mechanism. FINISH Anodized black outside / painted white inside or outside / inside painted white. *
* Available for tailor-made application. Please contact your Eklipse representative for further informations.
APPLICATIONS
Back to index
EDGE
113
TILTABLE LINEAR LED
NOMINAL DIMENSIONS
APPLICATIONS
MOUNTING OPTIONS
SURFACE GRAZING
X
Magnetic insert (MI)
Y
VAULTED CEILING
EKLIPSE EDGE - V2015 / 2 - EN - SPECIFICATION 2
Z
X Extrusion available various lengths up to 90” (2286 mm). Refer to ordering code.
Y 2.000” (51 mm)
Pivot inside leg cap (PILC)
Z 1.625” (41 mm)
Nominal dimensions do not include mounting options.
Inside short leg cap horizontal (ISLCH)
Inside leg cap horizontal (ILCH)
EDGE
TILTABLE LINEAR LED
LIGHT ADJUSTMENT EDGE can be installed on vaulted ceilings up to 45° angle.
EKLIPSE EDGE - V2015 / 2 - EN - SPECIFICATION 3
$ESIGNEDTOBEÚELDADJUSTABLE while lit, simply by pivoting the adjustment dial to the desired angle. The mechanism pivots 20” of linear light at a time. For example, IFYOUR%$'%ÚXTUREISoLONG it will be equipped with three adjustment dials.
Once tilted light beam becomes perfectly perpendicular to the ÛOOR
Each increment is individually tiltable and enables to create custom light direction and ambiance.
Back to index 114
Back to index
EDGE
115
TILTABLE LINEAR LED
GENERAL ORDERING CODE MODEL ANATOMY OF AN EKLIPSE ORDERING CODE: MODEL E E = EDGE
-
VOLTAGE 24V 24V = 24 volts
Final Eklipse ordering code:
EKLIPSE EDGE - V2015 / 2 - EN - SPECIFICATION 4
-
WATTAGE 7W W 3 3.5 W W 4 4.5 W W 5 5.5 W W 6 6.5 W W 7 7.5 W W 8 8.5 W W 9 9.5 W 10 W 10.5 W 11 W 11.5 W 12 W
-
LENGTH 40 10 20 30 40 50 60 70 80 90
END CAP PILC
ILCH ISLCH PILC MI
-
= Inside Leg Cap Horizontal = Inside Short Leg Cap Horizontal = Pivot Inside Leg Cap = Magnetic Insert
WIRING L L = Left R = Right
OPTICS 27
10 27 49 10X50
= 10° = 27° = 49° = 10° x 50°
COLOR 35K
27K 30K 35K 40K CUS
= 2700K = 3000K = 3500K = 4000K = Custom
FINISH ABK
-
ABK = Anodized black WH = Painted white CUS = Custom
Lengths in inches. Bracket thickness not included.
E - 24V - 7W - 40 - PILC - L - 27 - 35K - ABK
INSTALLATION NOTES
WARRANTY Five (5) years on parts.
APPROVAL Approved CSA / UL. 2090 rue Moreau, Suite 100 Montréal, Qc, H1W 2M3 t. 514.590.0099 | f. 514.590.0098 e.
[email protected] w. www.EklipseLighting.com SPECIFICATIONS MAY VARY, WITHOUT ALTERING OR REDUCING PRODUCT PERFORMANCE. ALL INFORMATION ON THIS DOCUMENT ARE THE SOLE PROPERTY OF EKLIPSE. REPRODUCTION OF THIS DOCUMENT, IN WHOLE OR IN PART, WITHOUT WRITTEN PERMISSION IS ILLEGAL.
Back to index 116
V02 Eklipse © 2015
2015 / 09 / 24
EKLIPSE // STREAMLINE™ - V2014/1 - EN&FR - SPECIFICATION
STREAMLINE
// LINEAR LED
Back to index 117
Back to index
STREAMLINE
118
// LINEAR LED
CHARACTERISTICS / !LINEAR,%$SYSTEMMADEOFHIGH GRADEEXTRUDEDALUMINUM 342%!-,).%tWONÚRSTPRIZEINTHE nPERSONALFAVORITE LIGHTINGSPACEoCATEGORYATTHEND-ONTREAL)NTERNATIONAL)NTERIOR$ESIGN3HOW 3)$)- INFORITSPURE ELEGANTLINES&ORARCHITECTURALAPPLICATION 342%!-,).%tCANBEUSED INMULTIPLESTOCREATELINESOFLIGHTATTHECEILINGORÛOOR BUTALSOONTHEWALLTOENHANCETHEENVIRONMENT HIGHLIGHTPOSTERS PAINTINGS OROTHERARTWORKS ORITCANBEUSEDASACHANDELIER)TSÚNISHAND DISCREETMOUNTINGSYSTEMMAKEITASTYLISH HIGH DESIGNLIGHTINGSYSTEM342%!-,).%tALSOOFFERS AREÚNEDSOLUTIONFORLIGHTINGSHOWCASESFORJEWELRYOROTHERPRODUCTS 4HESYSTEMMAYBEUSEDWITH ELBOWS ACCESSORIES ANDOPTICSTOCREATECUSTOMIZEDLIGHTING4HELIGHTSTRIPSAREAVAILABLEINCUSTOM LENGTHS INMULTIPLESOFoORo
APPLICATIONS /
NOMINAL DIMENSIONS X Y Z
ELECTRICAL /
PHYSICAL /
SOURCE & OPTICS /
INPUT
CONSTRUCTION
LIGHT SOURCE
7FT 7FTOR7FT
%+,)03%STREAMLINE™ 6 %. 30%#)&)#!4)/.// 1
REMOTE DRIVER
-USTBEPOWEREDBY%KLIPSE 03" 6 OR03" 6 &ORUSAGEWITH DIMMER USE,- 6 OR,- 6 WIRING
oLENGTHM !7' WIRELEADWITH7!'/QUICK CONNECTOR THERMAL CONTROL
4HROUGHCONSTANTTHERMAL MONITORINGCURRENTCONTROL %KLIPSEINTELLIGENTBOARDTECHNOLOGY)"4 MAINTAINSOPTIMAL LIGHTLEVELSANDOPERATINGTEMPERATUREPREVENTINGHARMFUL OVERHEATINGBYSELFADJUSTING TOITSENVIRONMENT
(IGHPRECISIONALUMINIUM extrusion (higher thermal CONDUCTIVEGRADE LIGHT ASSEMBLY
,INEAR,%$
LIGHT TEMPERATURE
+ + + +
oMM long Light Engines FOR6or oMM long Light EnginesFOR6
BEAM ANGLE
ADJUSTMENT
WARRANTY / &IVE YEARSONPARTS
"EAMDIRECTIONOF°OR° RELATIVELYTOTHELIGHTINGSURFACE FACTORYCONÚGURED ROTATIONOFEXTRUSIONFORON SITELIGHTADJUSTMENT
°
V
W
V °IN°MM W °IN°MM X 9IN9MM Y %XTRUSIONAVAILABLEINVARIOUSLENGTHS UPTOoREFERTOORDERINGCODE Z 3TEMLENGTHREFERTOORDERINGCODE
.OMINALDIMENSIONSDONOTINCLUDE MOUNTINGOPTION
INSTALLATION NOTES APPROVAL / !PPROVED#3!5,AND#%
FINISH
!NODIZED#LEAR!# #HROME #( "RUSHED#HROME"# &OR4AILOR MADEtFINISH PLEASECONTACTYOUR%KLIPSE REPRESENTATIVE
2090 rue Moreau, Suite 100 Montréal, Qc, H1W 2M3 t. 514.590.0099 | f. 514.590.0098 e.
[email protected] w. www.EklipseLighting.com SPECIFICATIONS MAY VARY, WITHOUT ALTERING OR REDUCING PRODUCT PERFORMANCE. ALL INFORMATION ON THIS DOCUMENT ARE THE SOLE PROPERTY OF EKLIPSE. REPRODUCTION OF THIS DOCUMENT, IN WHOLE OR IN PART, WITHOUT WRITTEN PERMISSION IS ILLEGAL.
Back to index
STREAMLINE
119
// LINEAR LED
APPLICATIONS / ANGLED CEILING
NOTE: In THISCASE THE maximum stem DISTANCEISo DISTANCEFROM the wall to the 342%!-,).%
DOWNLIGHT
CABINET
%+,)03%STREAMLINE™ 6 %. 30%#)&)#!4)/.// 2
-OUNTEDTOADRYWALLCEILINGANDAIMEDONGRAZINGA PERPENDICULARSURFACE
WALL
)NSTALLEDVERTICALLYINSIDETHE CABINET USINGTHECABINET BUSINGKIT
IN 35 mm
-OUNTEDDIRECTLYONTHEWALL ANDAIMEDONTHESAMEPLANE IDEALFORARTWORKLIGHTING
IN MM
ANGLED
Mounted to a angled drywall CEILINGANDAIMEDONGRAZING ASURFACE
IN 35 mm
IN 35 mm
STREAMLINE™ ORDERING CODE: -/$%,
6/,4!'%
STREAMLINE -
24V
7!44!'%&4
-
5W
STREAMLINE |12V6 |3W = 3 W/ft |24V6 |5W = 5 W/ft | |7W = 7 W/ft | | | | | | | | | | | | | | | | | | | |
,%.'4(
-
72
STEM
-
6
,%.').%
-
W
7)2).'
-
L
!.',%
-
30
!00,)#!4)/. 3%#/.$/04)#3
-
D
-
18
&),-
-
FC
#/,/2
-
27K
&).)3(
-
AC
| 12V 24V | The stem |W = Wide |L = Left |30|D = Downlight |18 |FC = Shield |27K+ |!# !NOD#LEAR | | length is the |F &OCUS |R= Right|60|W= Wall |26 |FF &ROST$IFF |30K+ |#( #HROME | | DISTANCE |B = Blend | | |C #ABINET |38 |FL ,INEAR/PT|35K+ |"# "RUSHED#H | | BETWEENTHE | | | |A = Angled |20X48X |NA= None |42K+ | | | installation | | | | |NA = None | | | and the | | wall | | | | | | | | ÚXTURE7ALL
3ECONDARYOPTICS | | APPLICATIONS | | | | | | | | | | CANHAVEA | | | | | CANONLYBECOM- | | | | | MAXSTEMOF | | | | | BINEDWITH7)$% | | | | | INCHES | | | | | ,IGHT%NGINE | | | | | | | | | | | | *Lengths in | | | | | | | | | | INCHESANDDO | | | | | | | | | | NOTINCLUDECAP| THICKNESS
&INAL%KLIPSEORDERINGCODE
STREAMLINE - 24V - 5W - 72 - 6 - W - PILC - L - 30 - D - 18 - FC - 27K - AC
%ND%XTENSIONCAPS
.UMBEROF%.$#!03?????????
.UMBEROF%84%.3)/.#!03?????????
Back to index
STREAMLINE
120
// LINEAR LED
PRODUCT’S MECHANICS / 4HEPRODUCTISFACTORYCONÚGUREDANDASSEMBLED BUTALLOWSFOR CUSTOMIZEDOPTIONS
3TEM CUSTOMLENGTH
%NDCAP CHOICEOFENDCAPOREXTENSIONCAP
-OUNTINGOPTIONCHOICEOFANGLE SURFACEORVITRINE END CAP EXTENSION
LIGHT ENGINE / WIDE
7IDEBEAM,%$FORSPREAD EFFECTONLARGESURFACE
FOCUS
.ARROWBEAMAMOREFOCUS APPLICATIONOFLIGHT
%+,)03%STREAMLINE™ 6 %. 30%#)&)#!4)/.// 3
12 OR 24 VOLTS / !6SYSTEMCANBECUTIN MULTIPLESOFINCHESFORA MOREPRECISELIGHTÚT5SED MORESMALLERSPACEAPPLICATIONS !6SYSTEMWILLALLOWGREATERDISTANCESWITHTHESAME 0OWER3UPPLYBUTCANONLY BECUTINMULTIPLESOFINCHES 5SEDMOREINARCHITECTURAL APPLICATIONS WHENAPRECISEÚT ISNOTSOCRITICAL -ULTIPLESOF INCHES
-ULTIPLESOF INCHES
ANGLE &ORINSTALLATION ONSURFACESIN angle
PERFECT BLEND
STEM
SURFACE &ORINSTALLATION on straight SURFACES
7IDERBEAMWITHSMALLER,%$ GAPSFORNO SCALLOPINGEFFECT
VITRINE $ROPPEDIN ACABINETOR SHOWCASE *NOTE:!MINIMUMOFKITS34%- -/5.4).' %.$#!0 MUSTBEORDERTOHAVEA COMPLETE342%!-,).%™PRODUCT
2090 rue Moreau, Suite 100 Montréal, Qc, H1W 2M3 t. 514.590.0099 | f. 514.590.0098 e.
[email protected] w. www.EklipseLighting.com
ORDERING THE MECHANICS: -/$%,
!##%33/29
STREAMLINE -
A
%.$#!0
-
E
-/5.4).'
-
S
STEM
-
6
&).)3(
-
AC
STREAMLINE |A !CCESSORY |E %ND#AP |S 3URFACE | 4HESTEMLENGTHISTHEDISTANCEBETWEENTHEINSTALLATION |!# !NOD#LEAR | |X = Extension |A = Angle | SURFACEANDTHEÚXTURE&ORWALLAPPLICATIONTHEMAXIMUM |#( #HROME | | |V 6ITRINE | STEMLENGTHISo |"# "RUSHED#H &INALORDERINGCODE
STREAMLINE - A - E - S - 6 - AC
SPECIFICATIONS MAY VARY, WITHOUT ALTERING OR REDUCING PRODUCT PERFORMANCE. ALL INFORMATION ON THIS DOCUMENT ARE THE SOLE PROPERTY OF EKLIPSE. REPRODUCTION OF THIS DOCUMENT, IN WHOLE OR IN PART, WITHOUT WRITTEN PERMISSION IS ILLEGAL.
Back to index 121
V02 Eklipse © 2015
2015 / 09 / 24
Back to index 122
V02 Eklipse © 2015
2015 / 09 / 24
Back to index 123
LED SPOT SERIES
V02 Eklipse © 2015
2015 / 09 / 24
Back to index 124
V02 Eklipse © 2015
2015 / 09 / 24
Back to index 125
ORION FAMILY V02 Eklipse © 2015
2015 / 09 / 24
Back to index 126
V02 Eklipse © 2015
2015 / 09 / 24
EKLIPSE ORION 4 - V2015 / 2 - EN - SPECIFICATION
ORION 4
RECESSED LED SPOT
Back to index 127
Back to index
ORION 4
128
RECESSED LED SPOT
CHARACTERISTICS Designed to be completely recyclable, ORION 4 incorporates the latest high-performance LED technologies and can use low-voltage power, consuming very little energy and producing no UV rays and very little heat. Featuring a highly developed design, this spot can be rotated 360° and has a pivoting angle of 30°. Specializing in accent lighting, the ORION 4 melts into the décor thus the star of the show is the light that it produces. Equipped with carefully binned LEDs, it ensures precise and constant colour for your projects and can be adapted to highlight showcases.
ELECTRICAL
PHYSICAL
SOURCE AND OPTICS
INPUT 15V: 5.5W.
LIGHT ENGINE High precision machined aluminum construction including an integrated heatsink.
LIGHT SOURCE 4 1.2W LEDs.
EKLIPSE ORION 4 - V2015 / 2 - EN - SPECIFICATION 1
REMOTE POWER SUPPLY 15V: Eklipse PSB-15-60. DIMMING POWER SUPPLY 15V: Eklipse LM-15-60.
ADJUSTMENT Omnidirectional (360°) and 30° pivoting angle.
WIRING 18” length - 20AWG wire lead with WAGO quick connector.
FINISH Brushed Aluminum. *
LIGHT TEMPERATURE 2700K, 3000K, 3500K, 4000K. * OPTICS 10°, 23°, 46°.
THERMAL CONTROL Through constant thermal monitoring and current control, Eklipse intelligent board technology (IBT) maintains optimal light levels and operating temperature preventing harmful overheating by self adjusting to its environment.
* Available for tailor-made application. Please contact your Eklipse representative for further informations.
APPLICATIONS
Back to index
ORION 4
129
RECESSED LED SPOT
EASY INSTALLATION The ORION 4 is equipped with retaining spring clips holding it into position once inserted into the installation hole.
EKLIPSE ORION 4 - V2015 / 2 - EN - SPECIFICATION 2
DIMENSIONS
A B
A = D 3.25 in (82.55 mm) B = 2 in (50.80 mm)
ADJUSTMENTS The ORION 4 has two adjustments that can be combined: a full 360° rotation and a 30° pivot angle.
Back to index
ORION 4
130
RECESSED LED SPOT
ORDERING CODE MODEL
ANATOMY OF AN EKLIPSE ORDERING CODE: MODEL O4 O4 = ORION 4
EKLIPSE ORION 4 - V2015 / 2 - EN - SPECIFICATION 3
Final Eklipse ordering code:
VOLTAGE 15V
-
15V = 15 volts
-
WATTAGE 5.5W 5.5W = 5.5 watts
OPTICS 46
10 23 46
= 10° = 23° = 46°
COLOR 35K
27K 30K 35K 40K CUS
= 2700K = 3000K = 3500K = 4000K = Custom
-
FINISH BA BA = Brushed aluminium CUS = Custom
O4 - 15V - 5.5W - 46 - 35K - BA
INSTALLATION NOTES
WARRANTY FIve (5) years on parts. 2.875 in 74 mm
APPROVAL Approved CSA/UL and CE.
2090 rue Moreau, Suite 100 Montréal, Qc, H1W 2M3 t. 514.590.0099 | f. 514.590.0098 e.
[email protected] w. www.EklipseLighting.com SPECIFICATIONS MAY VARY, WITHOUT ALTERING OR REDUCING PRODUCT PERFORMANCE. ALL INFORMATION ON THIS DOCUMENT ARE THE SOLE PROPERTY OF EKLIPSE. REPRODUCTION OF THIS DOCUMENT, IN WHOLE OR IN PART, WITHOUT WRITTEN PERMISSION IS ILLEGAL.
Back to index 131
V02 Eklipse © 2015
2015 / 09 / 24
Back to index 132
V02 Eklipse © 2015
2015 / 09 / 24
EKLIPSE ORION 4 + - V2015 / 2 - EN - SPECIFICATION
ORION 4 +
RECESSED LED SPOT
Back to index 133
ORION 4 +
Back to index 134
RECESSED LED SPOT
CHARACTERISTICS 4HE/2)/.0,53HASTHESAMESPECIÚCATIONSASTHE/2)/.BUTISEVENMOREVERSATILETHANKS TOITSSUPPORTRING WHICHALLOWSFORTHEADDITIONOFÚLTERSANDACCESSORIES)NCORPORATINGTHELATEST HIGH PERFORMANCE,%$TECHNOLOGIES THISCOMPLETELYRECYCLABLESPOTLIGHTUSESLOW VOLTAGEPOWER CONSUMESVERYLITTLEENERGY ANDPRODUCESNO56RAYSANDVERYLITTLEHEAT)THASAROTATION SYSTEMANDAPIVOTINGANGLEANDCANBEUSEDWITHALARGENUMBEROFACCESSORIES ÚLTERS LENSES ORASECONDOPTIONALOPTIC MAKINGITPERFECTLYADAPTABLETOEVERYLIGHTINGNEED
ELECTRICAL
PHYSICAL
SOURCE AND OPTICS
INPUT 67
LIGHT ENGINE (IGHPRECISIONMACHINED ALUMINUMCONSTRUCTIONINCLUDING ANINTEGRATEDHEATSINK
LIGHT SOURCE 7,%$S
EKLIPSE ORION 4 + - V2015 / 2 - EN - SPECIFICATION 1
REMOTE POWER SUPPLY 6%KLIPSE03" DIMMING POWER SUPPLY 6%KLIPSE,-
ADJUSTMENT /MNIDIRECTIONAL AND PIVOTINGANGLE
WIRING oLENGTH !7'WIRELEAD WITH7!'/QUICKCONNECTOR
FINISH "RUSHEDALUMINUM
LIGHT TEMPERATURE + + + +
OPTICS
THERMAL CONTROL 4HROUGHCONSTANTTHERMAL MONITORINGANDCURRENTCONTROL %KLIPSEINTELLIGENTBOARD TECHNOLOGY)"4 MAINTAINS OPTIMALLIGHTLEVELSANDOPERATING TEMPERATUREPREVENTINGHARMFUL OVERHEATINGBYSELFADJUSTINGTOITS ENVIRONMENT
!VAILABLEFORTAILOR MADEAPPLICATION0LEASECONTACTYOUR%KLIPSEREPRESENTATIVEFORFURTHERINFORMATIONS
APPLICATIONS
ORION 4 +
Back to index 135
RECESSED LED SPOT
EKLIPSE ORION 4 + - V2015 / 2 - EN - SPECIFICATION 2
DIMENSIONS
EASY INSTALLATION The ORION 4 PLUS is EQUIPPEDWITHRETAINING SPRINGCLIPSHOLDINGITINTO POSITIONONCEINSERTEDINTOTHE INSTALLATIONHOLE
ADJUSTMENT The ORION 4 PLUS has TWOADJUSTMENTSTHATCANBE COMBINEDAFULLROTATION ANDAPIVOTANGLE
ACCESSORIES A B
A$INMM B INMM LENS
02)-!29&),4%2
3%#/.$!29&),4%2
/04)/.!,3.//4
3500/242).'
!CCESSORIESARESOLDSEPARATELYANDÚELDCHANGEABLE
ORION 4 +
Back to index 136
RECESSED LED SPOT
ORDERING CODE MODEL
ANATOMY OF AN EKLIPSE ORDERING CODE: MODEL O4+
VOLTAGE 15V
-
O4+ = ORION 4 +
15V = 15 volts
EKLIPSE ORION 4 + - V2015 / 2 - EN - SPECIFICATION 3
Final Eklipse ordering code:
-
WATTAGE 5.5W
OPTICS 46
-
5.5W = 5.5 watts
10 23 46
= 10° = 23° = 46°
FILTER 2F
1F 2F NR
= Single filter = Double filter = Not required
ACCESSORIES SN
SN NR
= Snoot = Not required
COLOR 35K
27K 30K 35K 40K CUS
= 2700K = 3000K = 3500K = 4000K = Custom
-
FINISH BA BA = Brushed aluminium CUS = Custom
O4+ - 15V - 5.5W - 46 - 2F - SN - 35K - BA
INSTALLATION NOTES
WARRANTY &)VE YEARSONPARTS IN 74 mm
APPROVAL !PPROVED#3!5,AND#%
RUE-OREAU 3UITE -ONTRÁAL 1C (7- T\F ESALES EKLIPSELIGHTINGCOM WWWW%KLIPSE,IGHTINGCOM 30%#)&)#!4)/.3 -!9 6!29 7)4(/54 !,4%2).' /2 2%$5#).' 02/$5#4 0%2&/2-!.#% !,, ).&/2-!4)/./.4()3$/#5-%.4!2%4(%3/,% 02/0%249 /& %+,)03% 2%02/$5#4)/. /& 4()3 $/#5-%.4 ). 7(/,% /2 ). 0!24 7)4(/54 72)44%.0%2-)33)/.)3),,%'!,
Back to index 137
V02 Eklipse © 2015
2015 / 09 / 24
Back to index 138
V02 Eklipse © 2015
2015 / 09 / 24
Back to index 139
TRACK FAMILY V02 Eklipse © 2015
2015 / 09 / 24
Back to index 140
V02 Eklipse © 2015
2015 / 09 / 24
EKLIPSE ARGO - V2015 / 1 - EN - SPECIFICATION
ARGO
RAIL LED LIGHTING SYSTEM
Back to index 141
Back to index
ARGO
142
RAIL LED LIGHTING SYSTEM
CHARACTERISTICS ARGO LED track light’s innovative nature can be found in its distinctive magnetic assembly and interchangeable accessories. ARGO is made of three parts: a magnetically assembled head receptacle and light engine, combined with a track system. This ingenuity allows you to easily and safely switch the various available light engines and play with THEIRLIGHTASSEMBLYmSÛEXIBILITY4HANKSTOITSINTEGRATEDDIMMERCONTROLLER !2'/WILLMEETALLYOUR requirements. It was designed to allow for a full 365° rotation, spinning up to 135°, and track sliding, ANDITWASSPECIALLYBUILTFORÚTTINGVARIOUSENVIRONMENTSASWELLASACCENTLIGHTING7EPARTICULARLY recommend it to our hospitality or museum customers who may need to regularly change their lighting ambiance. ELECTRICAL
PHYSICAL
SOURCE AND OPTICS
INPUT 67
CONSTRUCTION High precision machined aluminum construction. Integrated active cooling. Magnetized light engine, for easy accessory installation.
LIGHT SOURCE 4 high-powered LEDs.
REMOTE POWER SUPPLY 24V: Eklipse PSB-24-100.
EKLIPSE ARGO - V2015 / 1 - EN - SPECIFICATION 1
DIMMING POWER SUPPLY 24V: Eklipse LM 24-100. THERMAL CONTROL Through constant thermal monitoring and current control, Eklipse intelligent board technology (IBT) maintains optimal light levels and operating temperature preventing harmful overheating by self adjusting to its environment.
LIGHT ENGINE Integrated active cooling system. Removable light engine for onTHE SPOTLIGHTCONÚGURATIONAND easy maintenance.
LIGHT TEMPERATURE 2700K, 3000K, 3500K, 4000K. * OPTICS 11°, 26° or 48°.
ADJUSTMENT Complete 365° rotation, 135° angle adjustment and sliding positioning on the rail system (sold separately). FINISH Anodized Black. *
* Available for tailor-made application. Please contact your Eklipse representative for further informations.
APPLICATIONS
Back to index
ARGO
143
RAIL LED LIGHTING SYSTEM
ADJUSTMENT The ARGO has two adjustments: a 365° rotation and a 135° pivot angle. 4HEPIVOTINGAXISISLOCATEDINTHECENTEROFTHELIGHTENGINEFOROPTIMAL light distribution.
X
ROTATION AXIS
DIMENSIONS
365º ROTATION
XIS TA O PIV
EKLIPSE ARGO - V2015 / 2 - EN - SPECIFICATION 2
Z
Y
X 1.435” (36.45 mm) Y 3.590” (91.19 mm) Z 2.250” (57.15 mm)
135º PIVOT ANGLE
Back to index
ARGO
144
RAIL LED LIGHTING SYSTEM
COMPOSITION The ARGO is composed of three elements: the track drive system, the head receptacle body and the light engine set. The light engine is magnetically assembled to the head receptacle. Once combined, the ARGO can be inserted to the track (LATITUDE RAIL, sold separately).
LATITUDE RAIL (SOLD SEPARATELY)
CUSTOMIZATION To remove the light engine, simply pull it away from the head receptacle. 4HE!2'/LIGHTENGINECANACCOMMODATEASNOOT AÚLMANDASELECtion of three different optics.
LIGHT ENGINE
OPTICS
EKLIPSE ARGO - V2015 / 1 - EN - SPECIFICATION 3
FILM
SNOOT HEAD RECEPTACLE
LIGHT ENGINE SET
ARGO
RAIL LED LIGHTING SYSTEM
FEATURES
EKLIPSE ARGO - V2015 / 2 - EN - SPECIFICATION 4
INTEGRATED DIMMER Furthermore, ARGO has an integrated dimmer controller placed at the back of the head receptacle letting you easily adjust the light intensity directly on-site.
Back to index 145
Back to index
ARGO
146
RAIL LED LIGHTING SYSTEM
GENERAL ORDERING CODE MODEL
LIGHT ENGINE
HEAD RECEPTACLE
ANATOMY OF AN EKLIPSE ORDERING CODE: MODEL
A A = ARGO
EKLIPSE ARGO - V2015 / 1 - EN - SPECIFICATION 5
Final ordering code:
WATTAGE
-
12W 12W = 12 watts
OPTICS
-
26 11 = 11° 26 = 26° 48 = 48°
ANATOMY OF AN EKLIPSE ORDERING CODE: COLOR
-
30K 27K = 2700K 30K = 3000K 35K = 3500K 40K = 4000K CUS = Custom
A - 12W - 26 - 30K - ABK
INSTALLATION NOTES
-
FINISH
MODEL
ABK
AH
ABK = Anodized black CUS = Custom
AH = ARGO HEAD
Final ordering code:
WARRANTY FIve (5) years on parts.
VOLTAGE
-
24V 24V = 24 volts
FINISH
-
ABK ABK = Anodized black CUS = Custom
AH - 24V - ABK
APPROVAL Approved CSA/UL and CE.
2090 rue Moreau, Suite 100 -ONTRÁAL 1C (7- t. 514.590.0099 | f. 514.590.0098 e.
[email protected] w. www.EklipseLighting.com 30%#)&)#!4)/.3 -!9 6!29 7)4(/54 !,4%2).' OR REDUCING PRODUCT PERFORMANCE. ALL INFORMATION ON THIS DOCUMENT ARE THE SOLE PROPERTY OF EKLIPSE. REPRODUCTION OF THIS $/#5-%.4 ). 7(/,% /2 ). 0!24 7)4(/54 72)44%.0%2-)33)/.)3),,%'!,
Back to index 147
V02 Eklipse © 2015
2015 / 09 / 24
Back to index 148
V02 Eklipse © 2015
2015 / 09 / 24
LATITUDE RAIL
EKLIPSE // LATITUDE RAIL - V2013/5 - EN&FR - SPECIFICATION
// SURFACE TRACK FOR LIGHTING SYSTEM
Back to index 149
Back to index
LATITUDE RAIL
150
// SURFACE TRACK FOR LIGHTING SYSTEM
CHARACTERISTICS / 4HECONDUCTORSURFACETRACKLIVE NEUTRALGROUND CONSISTSOFANEXTRUDEDALUMINUMPROÚLEWHICH ALSOFUNCTIONSASGROUNDANDINSERTEDPLASTICPROÚLESCARRYINGEMBEDDEDGAUGECOPPER CONDUCTORS!NYGIVENPROÚLECANBEEASILYCUTTOLENGTHONSITE)TISNOTNECESSARYTOCUTBACKORBEND BACKTHECONDUCTORS4HETRACKHASPRE PUNCHEDHOLESFORMOUNTINGEVERYoONCENTER
ELECTRICAL /
PHYSICAL /
INPUT
CONSTRUCTION
12 or 24 VDC. REMOTE DRIVER
2AILSYSTEMMUSTBEPOWERED BY%KLIPSEPSB-12-60 (12V) or PSB-24-100 (24V). WIRING
%XTRUDEDALUMINUMWITH integrated 12 gauge copper conductors.
APPROVAL / Approved CSA/UL.
X
Y
X = oMM Y =oMM
WEIGHT
LBSFT
INSTALLATION NOTES /
INSTALLATION
NA EKLIPSE // LATITUDE RAIL - V2013/5 - EN - SPECIFICATION // 1
WARRANTY / &IVE YEARSONPARTS
NOMINAL DIMENSIONS /
0RE PUNCHEDHOLESATEVERY o!LSO CANBECUTONSITEFOR easier installation. FINISH
Mat Black.
2090 rue Moreau, Suite 100 Montréal, Qc, H1W 2M3 t. 514.590.0099 | f. 514.590.0098 e.
[email protected] w. www.EklipseLighting.com
ORDERING THE RAIL: MODEL
LATITUDE RAIL -
CATEGORY
R
LATITUDE RAIL | R = Rail | | Final Eklipse Ordering Code
LENGHT
-
48
| 48 INCHES | 96 = 96 inches | 144 = 144 inches
FINISH
-
MB MB = Mat Black
LATITUDE RAIL - R - 48 - MB
SPECIFICATIONS MAY VARY, WITHOUT ALTERING OR REDUCING PRODUCT PERFORMANCE. ALL INFORMATION ON THIS DOCUMENT ARE THE SOLE PROPERTY OF EKLIPSE. REPRODUCTION OF THIS DOCUMENT, IN WHOLE OR IN PART, WITHOUT WRITTEN PERMISSION IS ILLEGAL.
Back to index
LATITUDE RAIL
151
// SURFACE TRACK FOR LIGHTING SYSTEM
ACCESSOIRES / LIVE END (FEED)
L-COUPLER*
T-COUPLER
With Nickel plated line voltage springs, ground right.
MULTIPLE FEED CANOPY COVER
With Nickel plated line voltage springs, ground inside.
FLOATING MID FEED
I-COUPLER*
X-COUPLER*
MID FEED CANOPY COVER
STRAIGHT COUPLER
FLEXIBLE COUPLER*
END CAP
END FEED CANOPY COVER
With Nickel plated line voltage springs.
EKLIPSE // LATITUDE RAIL - V2013/5 - EN - SPECIFICATION // 2
With Nickel plated line voltage springs, CANBEPOSITIONEDANYWHEREONTRACK
With Nickel plated line voltage springs.
With Nickel plated line voltage springs, for BUTTJOINT
With Nickel plated line voltage springs.
TO WITH.ICKELPLATEDLINEVOLTAGE
&ORUSEWITHALLCOMPONENTSMARKED
4 1/2 ”
4 1/2 ” 55/64
ORDERING ACCESSORIES: MODEL
LATITUDE RAIL LATITUDE RAIL
CATEGORY
-
A
| A !CCESSORY | | | |
Final Eklipse Ordering Code:
TYPE
-
FINISH
LE-L
| LE-L | LE-R | FM | SC | LC
= Live End (feed) Ground Left = Live End (feed) Ground Right = Floating Mid Feed = Staight Coupler = L-Coupler
LATITUDE RAIL - A - LE-L - BA
IC FC TC XC
= I-Coupler &LEXIBLE#OUPLER = T-Coupler = X-Coupler
EC MULC MIDC ENFC
= End Cap -ULTIPLE&EED#ANOPY#OVER -ID&EED#ANOPY#OVER %ND&EED#ANOPY#OVER
BA
| BA = Black | | | |
”
Back to index 152
V02 Eklipse © 2015
2015 / 09 / 24
Back to index 153
LED LIGHTING POWER SUPPLY
V02 Eklipse © 2015
2015 / 09 / 24
Back to index 154
V02 Eklipse © 2015
2015 / 09 / 24
LIGHT MANAGER
EKLIPSE // LIGHT MANAGER - V2015 / 1 - EN - SPECIFICATION
// LED LIGHTING POWER SUPPLY
Back to index 155
Back to index
LIGHT MANAGER
156
// LED LIGHTING POWER SUPPLY
CHARACTERISTICS / The LIGHT MANAGER is an advanced power supply for architectural LED lighting systems. It is available in many constant voltage options: 12V, 15V or 24V. It is also equipped with a maximum ADJUSTABLEBRIGHTNESSCONTROLASWELLASAPRIMARYCUT OFFSWITCHFOREASYON SITECONÚGURATION4HE LIGHT MANAGER is compatible with ON/OFF switches, 0-10V dimmers, and can be linked together for group control and management.
APPLICATIONS /
ELECTRICAL /
PHYSICAL /
NOMINAL DIMENSIONS /
INPUT VOLTAGE
CONSTRUCTION
100 - 240V.
INPUT CURRENT
EKLIPSE // LIGHT MANAGER - V2015 / 1 - EN - SPECIFICATION // 1
Variable according to voltage. OUTPUT VOLTAGE
12V, 15V or 24V.
OUTPUT POWER
12V = MAX. 60W 15V = MAX. 60W 24V = MAX. 100W DRIVE CURRENT
Constant voltage. FREQUENCY
50/60Hz.
OPERATING TEMP.
-25°C to 90°C.
Heavy duty galvanized steel case for a compact design. Isolated electrical compartment for wiring to primary. Extra electrical knockout for wiring in parallel. Convenient primary cutoff switch. Adjustable maximum brightness rotary switch and mode selector button for on-site ADJUSTMENTANDCONÚGURATION Standard RJ45 cable used to link LIGHT MANAGERS together for group management and control.
L2 L1
H W
H = 2.25 in (57.15 mm) W = 2.25 in (57.15 mm) L1 = 14.50 in (368.30 mm) L2 = 13.50 in (342.90 mm)
Back to index
LIGHT MANAGER
157
// LED LIGHTING POWER SUPPLY
FEATURES / WIRING COMPARTMENT
COLORFUL IDENTIFICATION
A segregated wiring compartment for easy and safe installation.
A color-coded label clearly IDENTIÚESTHEOUTPUTVOLTAGE
MODEL // MODÈLE
LM-12-60
12 60
(5.0A)
DIMMABLE // VARIABLE
D CODE // CODE D
20120822
UL STANDARD
CLASS 2
12 24
15
PRIMARY POWER SWITCH
The LIGHT MANAGER is equipped with a primary cutoff switch used to cut power locally without shutting down main circuit.
120~277Vac 50/60Hz 0.8~0.3A PF: 0.98
HANDY INFORMATION
MODEL // MODÈLE
LM-12-60
12 60
(5.0A)
DIMMABLE // VARIABLE
D CODE // CODE D
EKLIPSE // LIGHT MANAGER - V2015 / 1 - EN - SPECIFICATION // 2
20120822
UL STANDARD
CLASS 2
Basic installation instructions, product information & error diagnostics are printed on the LIGHT MANAGER for quick reference.
BRIGHTNESS ADJUSTMENT
The maximum brightness can be adjusted using the rotary switch located at the bottom of the main display. The current level is shown in real-time on the side of the main display.
MANAGEMENT
The nominal power load is shown at all times on the main display. The mode selector button, located on top of the loadwatts display is used to switch between installation modes. SELF-DIAGNOSIS
If at any moment a problem occurs, the error light will AUTOMATICALLYÛASHANDAN error code will appear on the main display. Using the supplied product’s manual, the problem can be quickly resolved.
Back to index
LIGHT MANAGER
158
// LED LIGHTING POWER SUPPLY
LINKING IT ALL TOGETHER / LIGHT MANAGERS can be liked together using a standard RJ45 cable. First, connect your Controller to the Master LIGHT MANAGER using the appropriate Mode (see COMPATIBLE INSTALLATION MODES section). Use the supplied 12 inch RJ45 cable to daisy chain the rest of the LIGHT MANAGERS. Up to 30 LIGHT MANAGERS can be daisy-chained. MASTER
SLAVE
COMPATIBLE INSTALLATION MODES / SWITCH ON/OFF
The most basic installation mode using a simple On/Off switch. OF = MASTER MODE. (ON/OFF) SL = SLAVE MODE. In this example, the ON/OFF switch is wired to the MASTER LIGHT MANAGER(set to “OF”). It will command all linked SLAVE LIGHT MANAGERS.
SLAVE
DIMMING 0-10V
Installation mode using 0-10V dimmer switch system. d1 d2 d3 SL
Ð Ï
Ð Ï
= DIMMING CURVE COMPENSATION 1* = DIMMING CURVE COMPENSATION 2* = DIMMING CURVE COMPENSATION 3* = SLAVE MODE.
In this example, the 0-10V dimmer switch is wired to the MASTER LIGHT MANAGER (set to “d1”). It will command all linked SLAVE LIGHT MANAGERS.
EKLIPSE // LIGHT MANAGER - V2015 / 1 - EN - SPECIFICATION // 3
* Description table for dimming curve compensation:
Ï FROM CONTROLLER: (use Black & Red wires) - On/Off Switch (use Purple & Grey wires) - 0-10V Dimmer (use RJ45 wire) - DMX Console
LINK IN
LINK OUT
MODE
DIMMER MANUFACTURER
D1
Leviton™ IP710-DLZ
D2
Lutron™ NOVA-T NTFTV
TYPICAL DIMMING CURVE
LIGHT MANAGER COMPENSATION
RESULT
Logarithmic Curve Exponential Curve
Linear Curve
Exponential Curve Logarithmic Curve
Linear Curve
D3 Linear Curve
LIGHT MANAGER
Back to index 159
// LED LIGHTING POWER SUPPLY
ANATOMY OF AN EKLIPSE ORDERING CODE: MODEL
EKLIPSE // LIGHT MANAGER - V2015 / 1 - EN - SPECIFICATION // 4
LM
VOLTAGE
-
12
POWER
-
AC PLUG TYPE
60
-
LIGHT MANAGER | 12 = 12 volts | 15 = 15 volts | 24 = 24 volts | | |
| 60 = MAXIMUM / DEFAULT at 12 volts | 60 = MAXIMUM / DEFAULT at 15 volts | 100 = MAXIMUM / DEFAULT at 24 volts | * Power can be factory set in increments of 5 watts up to | the maximum wattage allowed (see below). | Default power will be set to maximum allowed.
Final Eklipse ordering code:
LM-12-60-HW
INSTALLATION NOTES /
WARRANTY / Five (5) years on parts.
HW
| HW = Hard-wire (default) | PC = Power Cord (North America) | | | |
APPROVAL / Approved CSA / UL and CE. 2090 rue Moreau, Suite 100 Montréal, Qc, H1W 2M3 t. 514.590.0099 | f. 514.590.0098 e.
[email protected] w. www.EklipseLighting.com SPECIFICATIONS MAY VARY, WITHOUT ALTERING OR REDUCING PRODUCT PERFORMANCE. ALL INFORMATION ON THIS DOCUMENT ARE THE SOLE PROPERTY OF EKLIPSE. REPRODUCTION OF THIS DOCUMENT, IN WHOLE OR IN PART, WITHOUT WRITTEN PERMISSION IS ILLEGAL.
Back to index 160
V02 Eklipse © 2015
2015 / 09 / 24
Back to index
General information sheet
161
PSD Dimmable power supply
IP66
Back to index 162
Characteristics K2 products are high power constant voltage LED drivers. They feature an IP66 rank enclosure for wet location applications and a special wiring compartment comply to NEC standards.
Electrical
Physical
Input
Operating temperature from -40°C to 50°C (derate 2.5% per degree from 50ºC to 70ºC). Convection cooling.
100 W 110 ~ 277 VAC, 50-60Hz 87% efficiency (meets Energy Star requirement).
Application
Interior / Exterior use.
IP66
Output
No ingress of dust and protected against strong jets of water.
24 VDC - Constant voltage.
Dimming Standard 1-10V.
Protection Short circuit. Overload - 130% of the rated power.
V02 Eklipse © 2015
22 / 09 / 2015
2/4
Back to index 163
Dimensions K2-XL enclosure Junction box.
6.61” (168 mm)
0.94” (24 mm)
1.38” (35 mm)
SLOT (6X) 0.2” x 0.4” (5 x 10 mm)
8.50” (216 mm)
1.57” (40 mm) 1/2” NPTt hreaded
2.52” (64 mm)
9.92” (252 mm)
Wiring diagram Dimmer controller / system DIMMER (sourcing) (-)
DIM(GRAY)
PWM Controller PWM (250Hz~2KHz)
Maximum current required: 1mA max per LF1048 driver.
(+)
DIM+ (PURPLE)
10K ohm (min) potentiometer
NC/CAP +10V OUT (YELLOW)
(-)
DIM(GRAY)
DIM+ (PURPLE)
+V out (RED)
LED Driver
+10V OUT (YELLOW)
DIM(GRAY)
(+)
NC/CAP
DIM+ (PURPLE)
+10V OUT (YELLOW)
+V out (RED)
LED Driver
LED Driver -V out (BLACK)
-V out (BLACK)
V02 Eklipse © 2015
+V out (RED)
22 / 09 / 2015
-V out (BLACK)
3/4
Back to index 164
V02 Eklipse © 2015
2015 / 09 / 24
PSB
EKLIPSE PSB - V2015 / 2 - EN - SPECIFICATION
LED LIGHTING POWER SUPPLY
Back to index 165
Back to index
PSB
166
LED LIGHTING POWER SUPPLY
CHARACTERISTICS The PSB is an advanced power supply for architectural LED lighting systems. It is available in many constant voltage options: 12V, 15V or 24V. It features a segregated wiring compartment and mounting feet for easy and safe installation. It’s construction is heady duty galvanized steel.
ELECTRICAL
PHYSICAL
INPUT VOLTAGE
CONSTRUCTION
100 - 240V.
INPUT CURRENT
Variable according to voltage. OUTPUT VOLTAGE
12V, 15V or 24V.
EKLIPSE PSB - V2015 / 2 - EN - SPECIFICATION 1
OUTPUT POWER
12V = MAX. 60W 15V = MAX. 60W 24V = MAX. 100W DRIVE CURRENT
Constant voltage. FREQUENCY
50/60Hz.
OPERATING TEMP.
-25°C to 90°C.
Heavy duty galvanized steel case for a compact design. Isolated electrical compartment for wiring to primary. Extra electrical knockout for wiring in parallel. Convenient primary cutoff switch.
APPLICATIONS
Back to index
PSB
167
LED LIGHTING POWER SUPPLY
NOMINAL DIMENSIONS H = 2.25 in (57.15 mm) W = 2.25 in (57.15 mm) L1 = 14.50 in (368.30 mm) L2 = 13.50 in (342.90 mm)
L2 L1 H
W
ANATOMY OF AN EKLIPSE ORDERING CODE: MODEL
PSB
EKLIPSE PSB - V2015 / 2 - EN - SPECIFICATION 2
POWER SUPPLY
VOLTAGE
-
12
| 12 = 12 volts | 15 = 15 volts | 24 = 24 volts | | |
Final Eklipse ordering code:
INSTALLATION NOTES
POWER
-
AC PLUG TYPE
60
-
| 60 = MAXIMUM / DEFAULT at 12 volts | 60 = MAXIMUM / DEFAULT at 15 volts | 100 = MAXIMUM / DEFAULT at 24 volts | * Power can be factory set in increments of 5 watts up to | the maximum wattage allowed (see below). | Default power will be set to maximum allowed.
HW
| HW = Hard-wire (default) | PC = Power Cord (North America) | | | |
PSB - 12 - 60 - HW
WARRANTY Five (5) years on parts.
APPROVAL Approved CSA/UL and CE. 2090 rue Moreau, Suite 100 Montréal, Qc, H1W 2M3 t. 514.590.0099 | f. 514.590.0098 e.
[email protected] w. www.EklipseLighting.com SPECIFICATIONS MAY VARY, WITHOUT ALTERING OR REDUCING PRODUCT PERFORMANCE. ALL INFORMATION ON THIS DOCUMENT ARE THE SOLE PROPERTY OF EKLIPSE. REPRODUCTION OF THIS DOCUMENT, IN WHOLE OR IN PART, WITHOUT WRITTEN PERMISSION IS ILLEGAL.
2090 rue Moreau, Suite 100 H1W 2M3 Montréal QC - Canada T +1 514 590 0099 / F +1 514 590 0098
[email protected] www.eklipselighting.com
Les spécifications peuvent différées sans préavis sans réduire la performance du produit. Les informations contenues dans ce document sont la propriété de
Eklipse Architectural Lighting inc. Toute reproduction partielle ou totale sans l’autorisation écrite est interdite.
Specifications may vary, without altering or reducing product performance. All information on this document are the sole property of Eklipse Architectural Lighting inc.
Reproduction of this document, in whole or in part, without written permission is illegal.
V02 Eklipse © 2015
2015 / 09 / 24