Process automation. Product overview. Total Field Pneumatic Control Solution

Process automation Product overview Total Field Pneumatic Control Solution www.festo.com 11/1/2012 2:28:38 PM Festo The automation company Festo ...
Author: Shanon Bruce
1 downloads 0 Views 4MB Size
Process automation Product overview

Total Field Pneumatic Control Solution

www.festo.com

11/1/2012 2:28:38 PM

Festo The automation company Festo is a leading industrial automation supplier with main emphasis on pneumatic and electromechanical systems. Festo serves 300,000 customers worldwide and invests 8.5% of its turnover in Research & Development. With 59 independent national companies, more than 250 subsidiaries and a close knit service network in 176 countries worldwide, Festo strives to ensure that customers can obtain components, subsystems and systems for automation in next to no time.

Pa.Prod.Overview.indd 2

Festo – the industry segment partner Product range for process technology and process engineering Festo is keeping abreast with the fast pace of technological progress by continually expanding the range of products for this industry segment. In addition, the functionality of products has been adapted to particular functions of the process technology and process engineering such as explosion protection, corrosion resistant, etc.

Connection to third party products With regards to integrating Festo products to third party products, flexible components of Festo facilitates the connection to most of the industrial standard. The crucial factor is the system concept which integrates, complements and/or improves the existing functionality of a system with new component.

Quality assurance As an automation specialist in production industry, Festo has an enormous potential of knowhow experience. Furthermore, all products – components, subsystems, etc; are tested under the most extreme conditions and technically optimized. Worldwide industry segment advice Festo technical consultants, engineers and experts ensure that high quality yardstick synonymous with Festo is implemented to optimum effect worldwide. Our international presence ensures maximum availability of products and our proverbial quality of services.

11/1/2012 2:28:42 PM

Automation solution in process industry

Initiated as a supplier for automated components – actuated valves, tubings, air preparation units, various pneumatic connections to solenoid valves; Festo successfully integrated solenoid valves with electrical input/ output modules and employs latest fieldbus technology for communication. User thereby gets the benefit of optimized investment – reduced cable to the field, associate installation/ infrastructure cost, etc.

Furthermore, the ability to incorporate standard diagnostic features of solenoid valves will assist in the accurate identification of problem, leading to more effective maintenance activities. With such comprehensive range of products, engineering competencies and strong experiences in pneumatic design; Festo is in a unique position to be your fieldbus automation partners.

Control Cabinet (Normal/SS) Remote I/O with valve terminals

Digital Input Digital Output

For more than 8 decades, Festo develops products catering for digital and analogue automation in the field of pneumatic automation.

Air preparation unit

Analogue Input

Automated on/off valve

“Total Field Pneumatic Control Solution Supplier”

Pa.Prod.Overview.indd 3

11/1/2012 2:28:43 PM

Comparison of pneumatics, electric and hydraulics

Pa.Prod.Overview.indd 4

Pneumatics

Electric

Hydraulic

Energy storage

by mean of air tanks and compressed air bottles

with batteries, although only in small quantities

with the helps of gases

Energy transmission

easily up to 1,000m (pressure drop is possible)

unlimited, but voltage drop

up to 100m (pressure drop)

Leakage

no disadvantages (minimal energy loss)

danger of exposed cables

contamination

Environmental conditions

explosion-proof, temperature insensitive, ice hazard with non dried compressed air in winter

explosion hazard in certain areas, temperature insensitive, heating required for outdoor use

sensitive to temperature fluctuations, fire risk in the event of leakage

Handling

simple

only with specialised technical knowledge

more difficult than with pneumatics, return piping is necessary

Generation of linear movements

simple with excellent adjustable speed

associated with major expenditure, gear units

simple with cylinder, good adjustable

Forces

overload-proof, no energy consumption for retention forces

not overload-proof, impaired efficiency as a result of downstream mechanical elements

overload-proof, permanent energy consumption for retention forces

11/1/2012 2:28:46 PM

Standard in practice In ensuring the interchangeable of tremendous numbers of process automation products, which vary greatly in construction, material, size, service life, quality and price; the standards and guidelines has been drawn up over a period of time. These standards or guidelines refer to the mechanical interfaces and are intended to facilitate the assembly of a complete control unit (process valve/ actuator/ end position sensing device).

Pa.Prod.Overview.indd 5

Service reliability These interfaces are: • ISO 5211/5210 – process valve and process actuator • DIN 3337 – process valve and process actuator • VDI/VDE 3845, NAMUR – actuator, end position sensing device • VDI/VDE 3845, NAMUR – actuator, solenoid valve • ATEX explosion protection

Worldwide support

Engineering tools

By locating the engineering centre in each region, Festo brings engineering knowhow and experts closer to the customers. In addition, this also allows each engineering centre to tap on each other experience in bringing customers more advance solutions

“Delivering value” to Festo means more than just being a partner, but to offer competitive advantage support. The engineering tools created are used in assisting the engineers in dimensioning and simulating. This is to ensure the reliability from the start.

Global collaboration

Commissioning

In this globalization world, seeing the world as one customer and working on international level has become inevitable. With its global existence, Festo is able to provide a competitive advantage support worldwide.

Ready, tested control systems are installed by service personnel directly, where Festo will be on site to ensure the system is up and run. In addition, Festo also offers a range of automation related training courses.

11/1/2012 2:28:47 PM

Actuator Semi-rotary actuator – DFPB • • • •

Flange hole patterns to ISO 5211 Clockwise / counter-clockwise rotation is possible (valve interface on both sides) Assembly interface to VDI/VDE 3845 Rack and pinion mechanism

Function

Ambient temperature [°C]

Size

Torque at 6 bar [Nm]

Swivel angle [°]

Double-acting

-20...80

10...1,050

7...945

0...90

Single-acting

-20...80

105...5,205

1...882

0...90

Semi-rotary actuator – DAPS • • • • •

Flange hole patterns to ISO 5211 Assembly interface to VDI/VDE 3845 Namur port pattern for solenoid valves to VDI/VDE 3845 Scotch-yoke mechanism, twin piston balanced pinion force Available variant: Epoxy coating, PTFE coating and low temperature (-50°C)

Function

Ambient temperature [°C]

Size

Torque at 5-6 bar [Nm]

Swivel angle [°]

Double-acting

-20...80

8...8,000

8...8,000

0...90

Single-acting

-20...80

15...4,000

15...4,000

0...90

Manual semi-rotary actuator – DAPS-MW • • • •

Flange hole patterns to ISO 5211 Namur port pattern for solenoid valves to VDI/VDE 3845 Scotch-yoke mechanism Direct hand wheel actuating on piston without need of gearbox

Function

Ambient temperature [°C]

Size

Torque at 6 bar [Nm]

Swivel angle [°]

Double-acting

-20...80

15...1,920

15...1,920

0...90

Single-acting

-20...80

15...960

15...960

0...90

Semi-rotary actuator – DRD/DRE • • • •

Flange hole patterns to ISO 5211 Assembly interface to VDI/VDE 3845 Namur port pattern for solenoid valve to VDI/VDE 3845 Available variant: Spring force (closing/opening), adjustable end-position limitation and corrosion resistant version, swivel angle up to 180°

Function

Ambient temperature [°C]

Size

Torque [Nm]

Swivel angle [°]

Double-acting

-20...80

1...880

7.44...8,814

0...90

Single-acting

-20...80

2...880

2...880

0...90

Linear actuator – DLP • • • • •

Positioning sensing Integrated Namur working ports Piston rod with male thread Namur port pattern for solenoid valves to VDI/VDE 3845 Mounting hole pattern to ISO 5211

Function

Operating pressure [bar]

Piston Ø [mm]

Stroke length [mm]

Force [N]

Double-acting

6

80...320

40...2,000

2,800...48,255

Controlled linear actuator – DFPI • • • • •

Integrated displacement encoder, valve manifold and positioner Robust design for harsh environment Fast commissioning Use to control gate valves and plug valves in outdoor Special strokes on request

Function

Operating pressure [bar]

Piston Ø [mm]

Stroke length [mm]

Force [N]

Double-acting

3...8

100...320

40...990

4,417...48,255

SS Cylinder – DAIG • • • •

Compact stainless steel cylinder Corrosion resistance to harsh environment Use in mining industry Accessories: bellow (to protect piston rod seal)

Function

Operating pressure [bar]

Piston Ø [mm]

Stroke length [mm]

Force [N]

Double-acting

3...8

320

40...990

46,380...48,250

Safety shutter AEVU-SA • • • •

Safety shutter actuator with integrated inert gas pipe clamping Prevent human interference in safety critical environment Mechanical spring to extend Use in inert gas application

Function

Operating pressure [bar]

Piston Ø [mm]

Stroke length [mm]

Piston cover

Safety shutter

6

63...70

20...25

Normally extended

Knocker – KNO • • • • • • •

Pneumatic knocker High impact force Maintenance free Easy mounting Use for silos, hoppers and bulk goods movement Operating pressure: 2...8 bar Piston Ø: 40...80mm

3 position actuator • Use in filling and dozing application • For rough and fine dozing without the use of complex equipment • Digital control, no analogue required

Valves / Process valves Butterfly valve • Centric design • Standard double / single acting actuator • Face-to-face dimension in accordance with EN 558-1 Seal principle

Direction of flow

Ambient temperature [°C]

Temperature of medium [°C]

Nominal pressure

Soft

Reversible

-20...80

-23...82 (NBR) -40...135 (FDM)

PN10

Ball valve • • • •

Full port ball valve Combination of a pneumatic quarter turn actuator and a ball valve Combination comes in fail close or fail last ball valve Operating medium: compressed air, water neutral gases, neutral fluids, vacuum

Valve seal

Connection size

Temperature range [°C]

Torque [Nm]

Operating pressure [bar]

Soft PTFE

¼...4

-20...150

4...107.8

25...40

Angle seat valve VZXF – 2/2-way valve • Pneumatic controlled 2/2-way valve • Do not require different pressure between inlet and outlet • Suitable for steam, high viscosity up to 600mm2/s, dirty media Max viscosity [mm2/s]

Connection size (G or NPT)

Material

Flow rate [Kv]

Operating pressure [bar]

600

½...2

- Brass - Stainless steel 304

2.8...47.5

4...10

Diaphragm valve – VZWP • • • •

Simple sturdy design High working pressure using small solenoid coils Normally close (N.C.) guarantees valve closed on voltage failure Can be operated with air, neutral gas and neutral liquid

Design

Connection size (G)

Variant seal

Flow rate [Kv]

Operating pressure [bar]

Piloted piston poppet

¼...1

NBR (Standard) FPM

1.5...11.5

0.5...40

Diaphragm valve – VZWM • Solenoid activated diaphragm control valve • Various voltage 24 V DC, 110/230 V AC Nominal diameter [DN]

Connection size (G)

Material

Flow rate [l/min]

Operating pressure [bar]

8...50

¼...G2

- Brass - Stainless steel

1,400...31,000

10

Operated 2/2-way valve VZWD • High pressure rating • Direct solenoid activation • Use for small flow rates and/or high pressure application Max. viscosity [mm2/s]

Connection size

Material

Flow rate [Kv]

Operating pressure [bar]

22

¹/8...¼

- Brass - Stainless steel

0.06...0.4

0...90

Forced pilot operated valve – VZWF • • • •

Forced lifted of the valve diaphragm Different pressure is not required 2/2-way normally closed Suitable for cooling, filling, vacuum, liquid gas, bottling systems

Variant seal

Connection size (G)

Material

Flow rate [Kv]

Operating pressure [bar]

NBR (standard), EPDM, FPM

¼...2

- Brass - Stainless steel

1.8...28

0...10

Pulse valve – VZWE • High flow rate • Fast switching cycle • Suitable for clean bag house filters and anti pollutant equipment Pressure [bar]

Connection size (G)

Material

Nominal size [mm]

Operating voltage [V]

0.35...8

³/4...3

Cast aluminium

20...76

24 DC 110, 220 AC

Manual ball valve – CRQH • Pipe thread in accordance to ANSI B2.1 • Blow out proof stem / full port • Stainless steel ASIS 316 (DIN 14408) Function

Connection (NPT)

Material

Flow rate [Gv]

Nominal pressure [bar]

2pc design

¼...4

S/S316 body PTFE seal

6.6...780

up to 40

3pc design

Solenoid valves Pilot valve – VOFD (Namur) • • • •

Sturdy design and high resistance to corrosion make these valves suitable for outdoor use Port pattern to Namur for direct mounting of a drive as well as G and NPT threaded connections Suitable for use in safety related systems up to and including SIL 4 to IEC 61508; and protection class IP65 Duty cycle: 100%

Constructional design

Flow rate [l/min]

Ambient temperature [°C]

Pneumatic connection (G, NPT, Namur)

Operating pressure [bar]

Poppet

450

10...60

¼

2...8

Pilot valve – VOFC (Namur) • • • • •

Use within chemical and petrochemical systems – frequently used as pilot valves for flaps and drives The surface of the valve housing is treated with hard Ematal Port pattern to Namur for direct mounting of a drive as well as G and NPT threaded connection Suitable for use in safety related systems up to and including SIL 4 to IEC 61508; and protection class IP65 Duty cycle: 100%

Constructional design

Flow rate [l/min]

Ambient temperature [°C]

Pneumatic connection (G, NPT, Namur)

Operating pressure [bar]

Poppet / Spool

600...3,000

-25...60

¼,½

2...8

Solenoid valve – VSNB (Namur) • 3/2-way or 5/2-way mono or bistable • CNOMO interface for simple connection to the pilot control • Port pattern to Namur – VDI/VDE 3845 Constructional design

Flow rate [l/min]

Ambient temperature [°C]

Operating voltage [V]

Operating pressure [bar]

Piston spool

950

-10...60

24 DC 110, 230 AC

2.5...8

Solenoid valve NVF3 (Namur) • 3/2-way or 5/2-way mono or bistable • Port pattern to Namur – compliance to VDI/VDE 3845 • ATEX symbol: II 2 G c T6, II 2 D c 40°C, II 2 G EEx ia IIc T6, II 2 D Ex iaD IP65 T80°C Valve function

Flow rate [l/min]

Ambient temperature [°C]

Operating voltage [V]

Operating pressure [bar]

3/2-way or 5/2-way, single solenoid

900

-5...40

12, 24, 42, 48 DC 24, 42, 48, 110, 230, 240 AC

2...10

Valve terminals Valve terminal – CPV • • • • •

Ready to install and tested unit Ideal for decentralised system structures Optimized assembly for control cabinets Pneumatic multiple connector plate – fast assembly without the need to replace connected tubing Up to sixteen 2/2-way or 3/2-way valve per valve terminal – thanks to two-valve function in each valve slide

Type

Valve width [mm]

Flow rate [l/min]

Operating pressure [bar]

Ambient temperature [°C]

CPV10

10

400

-0.9...10

-5...50

CPV14

14

800

CPV18

18

1,600

Valve terminal – MPA/MPA-F/MPA-L • • • • • •

Slim high performance valve in sturdy metal housing With multi-pin plug, AS-interface, CPI, fieldbus connection and control block Expandable to up to 128 solenoid coils The LEDs on the valves and diagnostics via fieldbus allows fast troubleshooting Up to sixteen 2/2-way or 3/2-way valve per valve terminal – thanks to two-valve function in each valve slide Vertical shut-off module – individual valve could be replaced without shutting down the whole manifold

Ambient temperature [°C]

Flow rate [l/min]

Valve width [mm]

Operating voltage [V]

Operating pressure [bar]

-5...50

up to 700

10...21

24 DC

-0.9...10

Valve terminal – VTSA/VTSA-F • • • • • • •

High performance valves in sturdy metal housing Standardised from multi-pin plug to the fieldbus connection and control block Expandable to up to 32 solenoid coils Fast troubleshooting: LEDs on the valves and diagnostics via fieldbus Vertical shut-off module – individual valve could be replaced without shutting down the whole manifold Up to sixteen 2/2-way or 3/2-way valve per valve terminal – thanks to two-valve function in each valve slide Available in NPT thread

Duty cycle [%]

Flow rate [l/min]

Valve width [mm]

Operating voltage [V]

Operating pressure [bar]

100

400...2,900

18...52

24 DC 110 AC

-0.9...10

Valve terminal CDVI • Valve technology with a high resistant polymer materials • Development with practical consideration in mind – hygienic, corrosion resistant and easy to clean • Expandable to up to 24 solenoid coils Duty cycle [%]

Flow rate [l/min]

Valve width [mm]

Valve position

Operating pressure [bar]

100

300...650

24

4...16

-0.9...10

Valve terminal CPV Ex-i for explosion areas • • • •

Up to sixteen 2/2-way or 3/2-way valves per valve terminal – thanks to two-valve function in each slide Intrinsically safe valve terminal design to ATEX Category 2 (Zone1) Extremely robust thanks to the metal valve design Pneumatic multiple connector plate – fast replacement of the valve block without the need to replace the existing tubing connection • Valve assembly optimized for control cabinets • Available in NPT thread Duty cycle [%]

Flow rate [l/min]

Valve width [mm]

Operating voltage [V]

Ambient temperature [°C]

100

400

10

24 DC

-5...50

Valve terminal – VTUB • • • •

Universal from the individual valve up to the multi-pin plug Selectable valve functions: 3/2-way and 4/2-way Expandible to up to 16 valve positions on one valve terminal, max. 24 solenoid coil Sturdy polymer housing and metal manifold rail

Valve width [mm]

Flow rate [l/min]

Ambient temperature [°C]

Operating voltage [V]

Operating pressure [bar]

20

up to 1,000

-5...50

12, 24 DC 24, 110, 230 AC

-0.9...8

Modular electrical terminal – CPX • • • •

Electrical input/output modules, bus nodes and pneumatic interface/electronic module for valves Extensive range of functions as connection options for the electrical modules Open to all fieldbus protocols and ethernet The extensive selection of LEDs on the bus node and on all I/O modules allow fast troubleshooting

I/O modules CP interface Multi axis interface

Max. inputs capacity [byte]

Max. outputs capacity [byte]

Operating voltage [V]

Protection class

Up to 9

64

64

24 DC

IP65/IP67/IP20

Handheld – CPX-MMI • • • •

Fast access to the diagnostic history and the modules with diagnostic messaging Small, convenient commissioning and service device for the CPX terminal Display and modified the current status of the inputs and outputs of a module Advance commissioning through the monitoring/forcing of inputs and outputs without fieldbus master/PLC

Data interface

Protection class

ATEX category

Operating voltage [V]

Time stamp

RS 232 interface, 57.6 kBaud, M12 socket, 4 pins

IP65

II 3 G, II 3 D

18...30 DC

Display last 40 error occurrences

Installation system – CPI • • • •

Complete concept for decentralised system structure Four CP strings up to 10m in length (radius) facilitate optimum decentralization Max. 32 inputs and 32 outputs valves per string Display of the input status of each input signal via an assigned LED

No. of output

Protection class

Power supply [24 V DC]

Operating voltage [mA]

Operating voltage for sensors

16...32

IP65

CP connection

typically 75

24

Operating voltage [V]

Max. current output [mA]

Sensing type

Ambient temperature [°C]

Mechanical

0...250 DC/AC

up to 16,000

- Basic version - Explosion proof

-20...85

Contactless

10...30



- Basic version

Sensors Sensor box DAPZ • • • •

Drive interface to VDI/VDE 3845 (Namur) Simple and quick assembly and connection Integration solenoid valve actuation AS-interface is available

Sensor box SRBF • Limit switch attachment with two mechanical switches in painted aluminium housing • With 8-pin terminal block and yellow/red visual indicator • Mounting standard: ISO 5211, DIN EN 60947-5-1 Operating voltage [V]

Max. switching capacity

Measuring principle

Ambient temperature [°C]

Direct voltage DC

0...24

36 W

-25...80

Alternating voltage AC

0...250

1,700VA

For mechanical, electrical proximity sensors

Analogue/binary sensor box – SRAP/SRBP • The analogue version: • Reports the open/closed position of the semi-rotary actuator, detects the entire swivel range and reports this back to the controller via the analogue signal • The integrated sensors are based on proven 2D Hall Technology • The binary version: • Position sensor for semi-rotary actuator and it reports the open and closed position of the actuator • Sensors are based on reed technology • Drive interface to VDI/VDE 3845 (Namur) Output [mA]

Operating voltage [V]

Adjust angle [°]

Ambient temperature [°C]

Analogue

4...20

15...30

0...270

-20...80

Binary

up to 28.8 DC/AC

up to 28.8 DC/AC

Sensor box – QH-DR-E • Operating medium: filtered compressed air, lubricated or non-lubricated (for pneumatic sensing) • Quick and easy assembly • Drive interface to VDI/VDE 3845 (Namur) Sensing method

Operating pressure [bar]

Operating voltage [V]

Max. current output [mA]

Ambient temperature [°C]

Pneumatic sensing

-0.95...8





-10...60

Electrical sensing



0...250 DC/AC

16,000

-20...85

Inductive sensing



10...30 DC

200

-20...70

Proximity sensor – SME/SMT • • • • •

Insertable in slot from above, does not protrude over the cylinder profile Cable clip and inscription labels included in the scope of delivery Design for T-slot suitable for DLP, DFPI and DNG CE marking to EU directive for EMC and to EU directive explosion protection (ATEX) Explosion protection: up to Zone 0, 1, 2, 20, 21, 22 (ATEX)

ATEX category gas/ dust

Explosion ignition [°C]

Ambient temperature [°C]

Switch output

Protection class

II 1 G/ II 1 D

T 115

-10...70

Namur

IP65/IP67

Displacement encoder – MLO-POT-...-LWG • • • • •

1)

Connecting rod potentiometer Absolute measurement with high resolution Long service life High degree of protection Plug-in connection

Resolution [mm]

Stroke length [mm]

Power supply [V DC]

Wiper current maximum [mA]

Ambient temperature [°C]

0.01

100...750

10

101)

-30...100

Only permissible in the short-term in the event of a fault

Accessories Service unit – MS-Series • • • •

Sturdy housing Modular system Complete product range High flow rates

Connections

Grade of filtration [µm]

Flow rate [l/min]

Input pressure [bar]

Temperature range [°C]

G¹/8...G2

5 or 40

850...17,000

0.8...20

-10...60

Range of tubing • • • • • • • • • •

Economical Hydrolysis resistant Pressure resistant Heat resistant Antistatic Resistant to cleaning agent Media resistant Flame retardant Resistant to welding spatter Food industry approved

• • • • • • •

More than 300 connectors Mini and standard series Versatile thread/tubing diameter combinations Flexible assembly, can be repositioned by 360° and combinable Leakage-free Flow control, non-return, shut-off and pressure regulating valves available with QS connection Corrosion and acid resistant design

• • • •

Simple, fast installation: cut the length, insert and you’re done! Can be re-used a number of times Plug connector material is approved for use by the FDA (Food and Drug Administration) Leakage-free, corrosion-free

Range of fitting

Pipping system – QC

Outer diameter Ø [mm]

Operating pressure [bar]

Room temperature [°C]

Temperature for water separator [°C]

Pipe material

12...28

-0.95...15

-25...75

-25...75

Polyamide, aluminium

Adsorption dryer – LDM1 • • • • •

1)

Optimum final dryer with excellent operational reliability Suitable for use as an individual device or for integration in existing service unit combinations Flow rate dependent dew point reduction Wear-free function requiring no external energy Can be mounted near to point of use

Pneumatic connection (G)

Flow rate [l/min]

Pressure dew point reduction [K]

Temperature range [°C]

Input pressure [bar]

½...11)

300...1,000

17...20

2...50

3...12.5

with connection plates

Pressure boaster – DPA • • • • •

Boost up to twice the supply pressure Any assembly position in the compressed air network Maintenance-free Temperature range: 5...60 °C Free of paint-wetting impairment substance (LABS-free)

Note: Please refer to product data sheets for more technical details

Pa.Prod.Overview.indd 13

11/1/2012 2:31:52 PM

Product overview Component Operating level

Front End Display FED (Key)

Front End Display FED (Touch)

Electrical terminal CPI

Modular electrical terminal CPX

Handheld MMI

Valve terminal CPV

Valve terminal MPA/MPA-F

Valve terminal VTSA/VTSA-F

Valve terminal CDVI

Valve terminal for explosive areas CPV Ex-i

Pilot valve VOFD (Namur)

Pilot valve VOFC (Namur)

solenoid valve VSNB (Namur)

Standard valve NVF3 (Namur)

Manual ball valve CRQH

Service unit

Dryer LDM1

Couplings

Push-in fittings

Plastic tubings

Pressure boas DPA

Sensor box DAPS

Sensor box SRBF

Analog / Binary sensor box SRAP/SRBP

Sensor box QH-DR-E

Proximity sensor SME/SMT

Displacement MLO-POT

Semi rotary actuator DFPB

Semi rotary actuator DRD/DRQ

Semi rotary actuator DAPS

Manual semi rotary actuator DAPS

Linear actuator DLP

Controlled line tor DFPI

Remote I/O level Remote I/O

Valve terminals

Field level Solenoid valves

Accessories

Sensors

Actuators

Valves / process valves

Butterfly valve VZAB

Ball valve VAPB/VZBA

Ball valve VZBC

Angle seat valve VZXF

Pilot operated VZWM / WZWP

Force pilot operated VZWF

Direct operated valve VZWD

Industry segments

Water & wastewater

Biotechnology / pharmaceutical

Food & beverage

11/1/2012 2:33:02 PM

Systems

Customized System

Automation concept 1. Centralised installation Industrial Ethernet Fieldbus

Semi-rotary actuator DAPS with ball valve VZBC Control cabinet for automatic and manual pneumatic operation

Modular valve terminal CPX/MPA Semi-rotary actuator DAPS with ball valve VZBB

2. Decentralised installation Units for high and low temperature application

Industrial Ethernet Fieldbus

Semi-rotary actuator DFPB with ball valve VAPB Compact performance valve terminal CPV with stainless steel cover

Pressure boaster

Pipping system

3. Hybrid installation (centralised / decentralised) Displacement encoder MLO-POT

Semi-rotary actuator DAPS with butterfly valve VZSA

Customised control cabinet solutions, also for explosive areas

Industrial Ethernet Fieldbus

Controlled linear actuator DFPI

ated valve

Hygenic ball valve VZBB

Hygenic butterfly valve VZFA

Mining

Pa.Prod.Overview.indd 15

Linear actuator DLP with knife gate valve VZKA

Chemical

Semi-rotary actuator DAPS with ball valve and sensor box

Pulp / paper processing

www.festo.com

Melbourne 179 –187 Browns Road Noble Park Nth VIC 3174 Call Toll Free: 1300 88 96 96 Call Toll Fax: 1300 88 95 95 Branch Offices South Australia (Adelaide) Call Toll Free: 1300 88 96 96 Queensland (Brisbane) Call Toll Free: 1300 88 96 96 Western Australia (Perth) Call Toll Free: 1300 88 96 96 New South Wales (Sydney) Call Toll Free: 1300 88 96 96 China Head Office Festo (China) Ltd. 1156 Yun Qiao Road Jinqiao Export Processing Zone 201206 Pudong, Shanghai, P.R. China Tel: +86-21-6081 5100 Fax: +86-21-5854 0300 Branch Offices Beijing Tel: +86-10-65 15 50 96 Changchun Tel: +86-431-88 96 90 30 Changsha Tel: +86-731-8256 4272 Chengdu Tel: +86-28-86 19 98 70 Chongqing Tel: +86-23-63 63 68 66

Wuhan Tel: +86-27-87 32 27 37

Nashik Fax: +91-253-2316044

Daejeon Tel: +82-(0) 42-861 7797

Wuxi Tel: +86-510-82 75 53 88 Xiamen Tel: +86-592-239 61 23

Delhi (Noida) Tel: +91 (0)120-2460861 Pune Tel: +91-20-25521401

Gwangju Tel: +82-(0) 62-955 4168

Xi’an Tel: +86-29-62 66 92 96

Indonesia Head Office PT Festo Jl. Sultan Iskandar Muda no. 68 Arteri Pondok Indah Jakarta 12240, Indonesia Tel: +62-21-27 50 79 00 Fax: +62-21-27 50 79 98

Zhengzhou Tel: +86-371-67 94 49 28 Hong Kong Head Office Festo Ltd 6/F New Timely Factory Building, 497 Castle Peak Road, Kowloon, Hong Kong Tel: +852-27 43-8379 Fax: +852-27 86-2173 Branch Offices Guangdong Province Guangzhou Tel: +86-20-8732 1613

Batam Tel: +62-816 50 23 10 Cikarang Tel: +62-21-893 67 49

Malaysia Head Office Festo Sdn Berhad 10 Persiaran Industri Bandar Sri Damansara 52200 Kuala Lumpur Tel: +(60 3) 62 86 80 00 Fax: +(60 3) 62 75 64 11 Branch Offices Penang Tel: +(60 4) 643 0918 Ipoh Tel: +(60 5) 548 1002 Johor Bahru Tel: +(60 7) 352 3719 Malacca Tel: +(60 6) 335 1018

Guangzhou Tianhe Tel: +86-20-8600 3032

Glodok Tel: + 62-21-659 97 69-70

Shenzhen Tel: +86-755-2650 5798

Makassar Tel: +62-813 42 05 52 00

Dongguan Tel: +86-769-2236 7890

Medan Tel: +62-61-453 89 35, 452 00 11

New Zealand Head Office Festo Ltd 20 Fisher Crescent Mount Wellington Auckland Tel: +64-(09)-574-10 94 Fax: +64-(09)-574 10 99

Semarang Tel: +62-24-355 66 53, 355 48 24

Branch Offices Christchurch Tel: +64-(0)-33488796

Surabaya Tel: +62-31-849 10 44, 841 05 12

Hamilton Tel: 64-(0)-78466080

India Head Office Festo Controls Pvt. Ltd. 237-B, Bommasandra Industrial area, Bangalore Hosur Highway, Bangalore 560 099 Tel: +91-80-22894100 Fax: +91-80-27832058

Dalian Tel: +86-411-83 60 63 56

Branch Offices Ahmedabad Tel: +91-79-26565836

Hangzhou Tel: +86-571-87 22 37 97

Aurangabad Tel: +91-240-2337961

Jinan Tel: +86-531-88 11 39 10

Bangalore Tel: +91-80-22277582

Kunming Tel: +86-871-8 23 51 26

Baroda Tel: +91-265 2975276

Lanzhou Tel: +86-931-2 35 35 19

Chennai Tel: +91-44-28554491

Ningbo Tel: +86-574-87 28 92 18

Coimbatore Tel: +91-422-2499975

Nanjing Tel: +86-25-86 81 91 18

Hyderabad Tel: +91-40-27700283

Qingdao Tel: +86-532-85 79 83 26

Kolhapur Tel: +91-231-2660479

Shenyang Tel: +86-24-23 25 00 92

Kolkata Tel: +91-33-22821276

Suzhou Tel: +86-512-68 28 11 19

Ludhiana Tel: +91-161-2407742

Tianjin Tel: +86-22-26 26 40 76

Mumbai Tel: +91-22-26673133

Pa.Prod.Overview.indd 16

Branch Offices Bandung Tel: +62-22-732 1329, 732 1330, 732 0753

Ulsan Tel: +82-(0) 52-292 4215

Japan Head Office Festo K.K. 1-26-10 Hayabuchi Tsuzuki-ku, Yokohama 2240025 Tel: +81-(0) 45-593-56 10/5611 Fax: +81-(0) 45-593-5678

Philippines Head Office Festo Inc Festo Building KM 18, West Service Road South Super Highway 1700 Paranaque City Metro Manila Tel: +63 (2) 77 66 888 Fax: +63 (2) 82 34 219

Branch Office Osaka Tel: +81-(0)6-6320-3427

Branch Offices Bacolod and Iloilo Tel/Fax: +63 (34) 434 3341

Korea Head Office Festo Korea Co., Ltd. 470-1 Gasan-dong Geumcheon-gu Seoul #153-803 Tel: +82-1666 0202 Fax:+82-(0) 2-864 7040

Baguio Tel: +63 (74) 447-0394

Branch Offices Joongbu Tel: +82-(0) 31-655 2951

Cagayan de Oro Tel/Fax: +63 (88) 857-4904

Yeongnam Tel: +82-(0) 55-289 7038 Daegu Tel: +82-(0) 53-604 4365

Tarlac/Pampanga/Bataan/ Subic Tel/Fax: +63 (45) 455-3020 Mobile Phone: +63 (928) 502-8288 Singapore Festo Pte Ltd. 6 Kian Teck Way Singapore 628754 Tel: +65-62640152 Fax: +65-62611026 Taiwan Head Office Festo Co.Ltd 9 Kung 8th Road Linkou 2nd Industrial Zone Linkou Dist., New Taipei City 24450 Taiwan, R.O.C. Tel: +886-2-2601-9281 Fax: +886-2-26019286-7 Branch Offices Hsinchu Tel: +886-3-658-8318 Taichung Tel: +886-4-2475-7278 Kaohsiung Tel: +886-7-384-2856 Thailand Head Office Festo Ltd. 67/1 Phaholyothin Road Klong 1, Klong Luang Pathumthani 12120 Tel: +66 (0) 29 01 88 00 Fax: +66 (0) 29 01 88 33 Branch Offices Laemchabang/Chonburi Tel: +66 (0) 38 33 06 04 Saraburi Tel: +66 (0) 36 31 54 10 Vietnam Head Office Festo Co., Ltd (Cong Ty Tnhh Festo) No. 1515-1516 Vanh Dai Dong Street Ward An Phu, District 2 Ho Chi Minh City Tel: +84 (8) 62814453-4454 Fax: +84 (8) 62814442 Branch Office Hanoi Tel: +84 (4) 35 56 15 08-1509

Batangas Tel: +63 (919) 275-5857 Cebu Tel: +63 (32) 345-1120/3017

Davao/Zamboanga Tel/Fax: +63 (82) 221-4586 General Santos City Tel: + 63 (83) 382-0005 Iligan Tel/Fax: +63 (63) 225-9201

PA.R3.11.01.12

Australia Head Office Festo Pty. Ltd.

11/1/2012 2:33:47 PM

Suggest Documents