Data sheet H-2000-2298-11-A
Probe software for machine tools Program selection list
Software overview Software features Typical applications and features of programs are illustrated in the associated data sheet H‑2000‑2289. Please refer to the programming manual supplied with each software package for a complete specification of the software package.
User documentation
Inspection and tool setting software for lathes (including Y axis, C axis option and special tool setting software) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Inspection and tool setting software for lathes and mill/turn machines (including Y axis and non-contact tool setting) . . . . . . . . . . . . 4
Measuring in 617/618 or 619 planes
Inspection Plus software for machining centres . . . . . . . . . . . . . . . . . . . . . . . . .
6
EasySet with Inspection Plus software for machining centres . . . . . . . . . . . . . . . . . . . . . . . .
Contact tool setting software for machining centres . . . . . . . . . . . . . . . . . . . . . . . . Uses the industry standard TS27R and OTS probes, which suits the majority of applications.
Standard inspection software for machining centres . . . . . . . . . . . . . . . . . . . . . . . . .
Non-contact tool setting software for machining centres . . . . . . . . . . . . . . . . . . . . . . . .
7
Basic inspection/job set-up software with the ability to set work offsets, update tool offsets and print inspection results (where this control option is available). Suitable for use by an operator or part programmer.
Several packages to enhance and extend the capabilities of the standard inspection software. Includes vector measuring and angle measure, plus a 5-axis option.
9
11
13
Preferred for applications using delicate tools, and other applications where the probe must not obstruct the machine’s working envelope. Non-standard applications are available on request, subject to confirmation.
AxiSet™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
10
EasySet enables the operator to position the probe stylus at a suitable start position in jog mode before running an inspection cycle, thereby minimising programming requirements.
EasyProbe software for machining centres provides simple and fast job set-up and measuring routines that require minimal programming skills.
Additions to standard inspection software for machining centres . . . . . . . . . . . . . . . . . . . . . . . . .
8
A totally integrated package of software that includes vector and angle measure options, print options (where this control option is available) and an extended range of cycles. Includes an SPC cycle, 1 or 2 touch probing option, tool offset compensation by percentage of error and output data stored in an accessible variable stack.
Programming manuals are supplied in English, but other languages are also available for some packages.
EasyProbe inspection software for machining centres . . . . . . . . . . . . . . . . . . . . . . . . .
Multi-axis standard inspection software for machining centres . . . . . . . . . . . . . . . . . . . . . . . . .
AxiSet™ Check-Up provides machine users with a fast and accurate health check of rotary axes.
14
Data sheet Probe software for machine tools
Inspection and tool setting software for lathes Typical machine(s) and Renishaw products used with this software:
Lathe
Vertical turning lathe
HPMA OLP40
Controller Fanuc Macro A 0T MATE, A, B, C, F
Tool setting
Memory (KB) 1
Part number
Memory (KB) 1
A-4012-0477
7.0
A-4012-0530
6.0
Fanuc Macro B B, C, F 0T, 6T, 10-15T, 15iT, 16-21T / iT, 30-32iT
A-4012-0541 2 3
10.7
A-4012-0528 4 A-4012-0779 5
6.1 9.2
Fanuc Y axis
A-4012-1092 2
35.0
–
–
Haas
A-4012-0874
2
10.0
Hitachi Seicos Llll (L3), L10
A-4012-0612 2
24.0
Hitachi Hi-cell Sigma 16, 18, Lambda L3, L10
A-4012-0843 2
Mazak (QTN range) M Plus / Fusion 640 Matrix Nexus / Smart
A-4013-0071 2 A-4013-0137 2
26.0 36.0
A-4013-0066 –
17.0 –
Meldas L64 M600/700 (2 axis) Y axis M600/700 (3 axis)
A-4013-0028 2 A-4013-0250 A-4013-0154 2 A-4013-0254
10.7 7.0 35.0 20.0
– – – –
– – – –
A-4012-0929
22.0
A-4012-0961
9.0
A-4016-1047 2
14.0
–
–
810D, 828D, 840D 802D
A-4014-0066 A-4014-0066 A-4014-0137 –
12.4 12.4 19.0 –
A-4014-0068 A-4014-0068 A-4014-0130 A-4014-0433
9.3 9.7 27.2 19.0
Traub TX8, TX8D
A-4006-0009
2.7
A-4006-0011
6.7
Yasnac LX3
A-4014-0011
10.1
–
–
Num 750, 760, 1060 Okuma U100/P200L Siemens 810, 820, 840, 850, 880 840C
2
Inspection Part number
A-4012-0877
4
6.5
–
–
31 KB standard cycles + 18 KB extended cycles dependent on machine options fitted.
Inspection and tool setting software for lathes – continued C axis measure option Controller
Inspection
Tool setting
Part number
Memory (KB) 1
Part number
Memory (KB) 1
Fanuc Macro B 0T, 6T, 10-15T, 15iT, 16-21T / iT, 30-32iT
A-4012-0653
2.8
–
–
Fanuc Macro B Special stand-alone package, compatible with inspection software 0T, 6T, 10-15T, 15iT, 16-21T / iT, 30-32iT
A-4012-0709
3.2
–
–
Special tool setting software Controller
Inspection Part number
Fanuc Macro B 0T, 6T, 10-15T, 15iT, 16-21T / iT, 30-32iT 16-21T / iT
– –
3 axis tool setting
Memory (KB)
1
– –
Part number
Memory (KB) 1
A-4012-0592 A-4012-0745 5
12.0 14.2
Notes: Please quote part number when ordering. 1 Approximate program memory required. 8 KB equals approximately 20 m (66 ft) of tape. 2 Print option available – function dependent on control. 3 This includes C axis cycles 4 Manual or manual with automatic option. 5 Manual cycles with driven tools.
3
Data sheet Probe software for machine tools
Inspection and tool setting software for multi-axis lathes and mill/turn machines Typical machine and Renishaw products used with this software:
RLP40 Multi-axis lathe
Controller
4
HPMA
Inspection
Tool setting
Part number
Memory (KB) 1
Part number
Memory (KB) 1
Doosan MX series (Fanuc)
A-4012-1016 2
–
–
–
Mazak Y axis lathes e.g. Multiplex, Quadrex, QTN-Y Integrex (not e-Series) M Plus / Fusion 640 MT Pro
A-4013-0030 2
27.0
A-4013-0066
17.0
Matrix – (not Integrex series)
A-4013-0168 2
79.0
–
–
Mazak Integrex e-Series lathes Fusion 640 M Pro
A-4013-0083 2
71.0
–
–
Integrex e-Series / i-Series / j-series Matrix / Matrix Nexus
A-4013-0106 2
91.0
A-4013-0159
14.9
Integrex Mark IV lathes Matrix
A-4013-0106 2
91.0
–
–
Mori Seiki Y axis lathes NT / MT series (Fanuc)
A-4012-0834 2
37.0
–
–
Nakamura Super NX (Fanuc)
A-4012-1074 2
40.0
–
–
Inspection and tool setting software for lathes and mill/turn machines continued Non-contact tool setting A typical machine and Renishaw product used with this software:
NC4
Multi-axis lathe
Controller
Non-contact tool setting Part number
Memory (KB) 1
Mazak Integrex e-Series lathes Fusion 640M
A-4013-0092
29.0
Mazak Y axis lathe Fusion 640M
A-4013-0566
29.0
Mazak Integrex e-Series / i-Series / Mark IV lathes Matrix / Matrix Nexus
A-4013-0123
29.0
Mori Seiki NT / MT series (Fanuc)
A-4012-1020
19.0
Notes: Please quote part number when ordering. 1 Approximate program memory required. 8 KB equals approximately 20 m (66 ft) of tape. 2 Print option available – function dependent on control.
5
Data sheet Probe software for machine tools
EasyProbe inspection software for machining centres Typical machine(s) and Renishaw product used with this software:
Horizontal machine OMP60
Vertical machining centre
Controller
Part number
Memory (KB) 1
Fanuc Macro B 0M, 6M, 10-15M,15iM, 16-21M / iM, 30-32iM
A-4010-0001
6.0
Haas
A-4010-0001
6.0
Mitsubishi Meldas M3, M310, M320, M330, M520, M600, M700 series
A-4010-0001
6.0
Siemens 802D 810D V5+, 828D, 840D V5+ 6
A-4014-0348 A-4014-0391
10.0 10.0
Yasnac MX3, I80, J50, J100, J300
A-4010-0001
6.0
Notes:
6
Please quote part number when ordering. 1 Approximate program memory required. 8 KB equals approximately 20 m (66 ft) of tape. 6 Siemens V5+ probing software will not run on previous versions of 810D and 840D controls.
Standard Inspection software for machining centres Typical machine(s) and Renishaw product used with this software:
Horizontal machine OMP60
Vertical machining centre
Controller
Part number
Memory (KB) 1
Fadal 32MP, CNC88, CNC88HS
A-4016-0036
24.0
Fanuc Macro A 0M MATE, 0MA, 0MB, 0MC
A-4012-0542
11.0
Fanuc Macro B 0M, 6M, 16-21M / iM, 30-32iM 10-15M, 15iM
A-4012-0496 A-4012-0540
13.8 13.8
GE 2000
A-4016-0057
5.8
Haas
A-4012-0620
13.0
Heidenhain TNC 151, 155, 351, 355 (A, B, BR, P, Q and QR series) 407, 415, 2500, 360
A-4014-0050
8.2
Heidenhain print option (Macro and PC utility)
A-4014-0056
–
Mazak M32, Fusion 640M (EIA / ISO offsets) M32, M Plus, Fusion 640M (EIA / ISO and Mazatrol compatible)
A-4013-0005
14.3
Mitsubishi Meldas M3, M310, M320, M335, M500, M600, M700 series
A-4013-0005
14.3
Selca S3000, S4000
A-4014-0092
13.0
Siemens 810, 820, 840, 850, 880, 840C
A-4014-0054
17.9 Continued overleaf
Notes: Please quote part number when ordering. Approximate program memory required. 8 KB equals approximately 20 m (66 ft) of tape. 2 Print option available – function dependent on control. 1
7
Data sheet Probe software for machine tools
Standard inspection software for machining centres – continued Controller
Part number
Memory (KB) 1
Tosnuc 600, 777, 800M
A-4012-0610
12.0
Yasnac Yasnac MX2 Yasnac MX2 (Matsuura)
A-4014-0009 2 A-4014-0008 2
12.0 12.0
Yasnac Yasnac MX3 (Matsuura using 3 user inputs) Yasnac MX3, J50
A-4014-0006 2 A-4014-0016 2
16.0 13.0
Yasnac I80, J100, J300 (Matsuura M80)
A-4014-0013 2
14.0
Additions to standard inspection software for machining centres Controller
Vector measure
Angle measure
Part number
Memory (KB) 1
Part number
Memory (KB) 1
Fanuc Macro B 0M, 6M, 10-15M, 15iM, 16-21M / iM, 30-32iM
A-4012-0527
8.4
A-4012-0549
3.3
Yasnac I80 (Matsuura M80)
A-4012-0527
8.4
–
–
Multi-axis standard inspection software for machining centres A typical machine and Renishaw product used with this software:
RMP60
Gantry machine 5 face
Controller
Part number
Memory (KB) 1
Fanuc Macro B 0M, 16-21M / iM, 30-32iM 10-15M, 15iM
A-4012-0640 2 A-4012-0578 2
38.0 37.5
Siemens 810D, 840D
A-4014-0147 2
71.0
Notes: Please quote part number when ordering. Approximate program memory required. 8 KB equals approximately 20 m (66 ft) of tape. 2 Print option available – function dependent on control. 1
8
Inspection Plus software for machining centres Typical machine(s) and Renishaw product used with this software:
Horizontal machine Gantry machine 3 axis
OMP60
Vertical machining centre
Kinematic type probes only
RENGAGE type probes only (MP700, OMP400 and RMP600)
Controller
Part number
Memory (KB) 1
Part number
Memory (KB) 1
Brother 32A (post June 2002) 32B
A-4012-0908 A-4012-1028
35.0 35.0
– –
– –
Fanuc Macro B 0M, 10-15M, 15iM, 16-21M / iM, 30-32iM
A-4012-0516 2
47.0
A-4012-0685
47.0
Haas
A-4012-0880 2
46.9
A-4012-0890
46.5
Hitachi (Fanuc special)
A-4012-0673 2
47.0
–
–
Hitachi Seicos Σ10, Σ16, Σ18, MIII (M3), Lambda
A-4012-0749 2
59.3
A-4012-0761
46.2
Hurco WinMax
A-4012-1126 2
46.0
–
–
Makino Pro 3, Pro 5
A-4012-0719 2
51.0
–
–
Mazak M32, M Plus and Fusion 640M (EIA / ISO and Mazatrol compatible)
A-4013-0023 2
48.0
A-4013-0040
47.0
Matrix M including Variaxis Matrix / Matrix Nexus
A-4013-0112 2
48.0
–
–
VTC800 5 axis Matrix (EIA / ISO and Mazatrol compatible)
A-4013-0205 2
52.0
–
–
Milltronics
A-4012-1178 2
71.0
–
–
Mitsubishi Meldas M3, M310, M320, M330, M335 series M50 / M500 series M64, Magic 64, M600, M700 series
A-4012-0516 2
47.0
A-4012-0685
47.0
A-4012-0936
47.0
A-4012-0942
48.0
A-4012-0712 2
67.0
–
–
Mori Seiki MS series NUM 750, 760, 1020-1060 (currently metric mode only)
Continued overleaf Notes: Please quote part number when ordering. 1 2
Approximate program memory required. 8 KB equals approximately 20 m (66 ft) of tape. Print option available – function dependent on control.
9
Data sheet Probe software for machine tools
Inspection software for machining centres – continued Kinematic type probes only
RENGAGE type probes only (MP700, OMP400 and RMP600)
Controller
Part number
Memory (KB)1
Part number
Memory (KB)1
Okuma OSP, 5020M, 700M, 7000M OSP U10M / U100M / P200M
A-4016-1009 A-4016-1035
42.0 53.0
– –
– –
Tosnuc 888M
A-4012-0949 2
41.0
–
–
Siemens 802D 810D V5+, 828D, 840D V5+ 6
A-4014-0336 A-4014-0356 2
50.0 77.0
– A-4014-0362 2
– 72.0
A-4014-0412
–
–
–
A-4014-0070 2
49.0
A-4014-0104 2
49.0
Siemens R Print utility 840D Yasnac MX3, J50, I80, J100, J300
EasySet with Inspection software for machining centres Note: Inspection Plus software must be installed on the machine controller prior to using EasySet cycles.
Controller
Inspection Part number
Memory (KB)1
Haas
A-4012-0899
2
2.5 KB
Fanuc Macro B 0M, 6M, 10-15M, 15i, 16-21M, 16-21i, 30-32iM
A-4012-0785 2
2.0 KB
Notes:
10
Please quote Part number when ordering. 1 Approximate program memory required. 8 KB equals approximately 20 m (66 ft) of tape. 2 Print option available – function dependent on control. 6 Siemens V5+ probing software will not run on previous versions of 810D and 840D controls.
Contact tool setting software for machining centres Typical machine(s) and Renishaw product used with this software:
Gantry machine 3 axis
Horizontal machine
TS27R Vertical machining centre
Controller
Part number
Memory (KB)1
Brother 32A (post June 2002) 32B
A-4012-1007 7 A-4012-1103 7
14.0 27.0
Fadal 32MP, CNC88, CNC88HS
A-4016-0043 7
13.2
Fanuc Macro A 0M MATE, 0MA, 0MB, 0MC
A-4012-0645 7
12.0
Fanuc Macro B 0M, 6M, 16-21M / iM, 10-15M, 15iM, 30-32iM
A-4012-0584 7
9.3
GE 2000
A-4016-0059 7
2.6
7
Haas
A-4016-0886
Hitachi Seicos
A-4012-0817 7
10.0
Hurco WinMax
A-4012-1145 7
28.0
Mazak M32, M Plus, Fusion 640M (EIA / ISO and Mazatrol compatible)
A-4013-0036 7
13.0
Matrix / Matrix Nexus
A-4013-0133 7
14.0
Milltronics
A-4012-1174 7
13.0
Mitsubishi Meldas M3, M310, M320, M335, M500, M600, M700 series
A-4013-0007 7
9.4
NUM 750, 760, 1020, 1060
A-4012-0665 7
14.0
Okuma U10M / U100M / P200M
A-4016-1039 7
31.0
Selca 3000 / 4000 series
A-4014-0094 7
11.3
8.0
Continued overleaf
11
Data sheet Probe software for machine tools
Contact tool setting software for machining centres – continued Controller
Part number
Memory (KB)
Siemens 810, 820, 840, 850, 880 840C 802D 810D V5+, 828D, 840D V5+ 6
A-4014-0064 7 A-4014-0064 7 A-4014-0310 7 A-4014-0396 7
7.0 7.5 9.0 9.0
– A-4014-0018
– 9.0
Yasnac Matsuura M80 Yasnac MX3, J50, I80, J100, J300
Notes: Please quote Part number when ordering. 1
6 7
12
Approximate program memory required. 8 KB equals approximately 20 m (66 ft) of tape. Includes rotating tool setting. Siemens V5+ probing software will not run on previous versions of 810D and 840D controls. Please contact your local Renishaw office if software for earlier 810D or 840D controls is required.
Non-contact tool setting software for machining centres Typical machine(s) and Renishaw product used with this software:
Gantry machine 3 axis
NC4
Horizontal machine Vertical machining centre
Controller
Part number
Memory (KB)1
Brother 32A (post June 2002) 32B
A-4012-0904 A-4012-1035
24.0 24.0
Fadal 32MP / CNC88
A-4016-0061
31.0
Fanuc Macro B 0M, 6M, 16-21M / iM, 10-15M, 15iM, 30-32iM (includes angled beam option)
A-4012-0820
20.0
Haas
A-4012-0895
23.0
Heidenhain 426, 430 i530, i530 HSCI
A-4014-0165 A-4014-0253
230.0 7.5 MB
Hitachi Seiki Sigma 16 / 18M
A-4012-0848
24.0
Hurco WinMax
A-4012-1141
33.0
Makino Pro 3, Pro 5 (includes angled beam option)
A-4012-0900
27.0
Mazak (EIA / ISO and Mazatrol compatible) M32, M Plus, Fusion 640M
A-4013-0062
26.0
Mazak angled beam Fusion 640M
A-4013-0088
32.0
Mazak (includes angled beam option) Standard machines and VTC800 Matrix / Matrix Nexus / Smart
A-4013-0119
41.0
Mitsubishi Meldas M3, M310, M320, M335, M500, M600, M700 series
A-4013-0050
20.0
Notes: Please quote Part number when ordering. 1
Approximate program memory required. 8 KB equals approximately 20 m (66 ft) of tape.
13
Renishaw plc New Mills, Wotton-under-Edge, Gloucestershire, GL12 8JR United Kingdom
T +44 (0)1453 524524 F +44 (0)1453 524901 E
[email protected] www.renishaw.com
Non-contact tool setting software for machining centres – continued Controller
Part number
Memory (KB)1
Milltronics
A-4012-1182
38.0
Mori Seiki (non-Hi-Tech machines)
A-4012-0953
24.0
Mori Seiki angled beam NMV 5000 (Fanuc 30)
A-4012-1116
34.0
Okuma 5020M, 700M, 7000M, U10M, U100M, OSP 200M
A-4016-1021
31.5
Selca S3000 / S4000 series
A-4014-0218
148.0
A-4014-0344 A-4014-0401
26.0 27.0
Yasnac MX3, J50
A-4014-0020
21.0
Yasnac angled beam MX3, J50, I80, J100, J300
A-4014-0025
28.2
Siemens 802D 810D V5+, 828D, 840D V5+ (includes angled beam option) 6
Notes: Please quote Part number when ordering. 1 Approximate program memory required. 8 KB equals approximately 20 m (66 ft) of tape. 6 Siemens V5+ probing software will not run on previous versions of 810D and 840D controls. Please contact your local Renishaw office if software for earlier 810D or 840D controls is required.
AxiSet™ Check-Up packages Please quote part number when ordering. Controller
Part number
Memory (KB)
AxiSet™ Check-Up PC software
A-5642-3001
–
Fanuc (table – table configuration)
A-5642-4101
39.0
Mazak Integrex e-Series / i-Series (Matrix and Fusion)
A-5642-4009
56.0
Mazak Mark IV (Matrix)
A-5642-4005
56.0
Mazak Variaxis (Matrix and Fusion)
A-5642-4001
29.0
Mori Seiki (table – table configuration)
A-5642-4401
41.0
Siemens 810/840D (table – table configuration)
A-5642-4501
51.0
For worldwide contact details, please visit our main web site at www.renishaw.com/contact RENISHAW HAS MADE CONSIDERABLE EFFORTS TO ENSURE THE CONTENT OF THIS DOCUMENT IS CORRECT AT THE DATE OF PUBLICATION BUT MAKES NO WARRANTIES OR REPRESENTATIONS REGARDING THE CONTENT. RENISHAW EXCLUDES LIABILITY, HOWSOEVER ARISING, FOR ANY INACCURACIES IN THIS DOCUMENT. © 2008 – 2011 Renishaw plc. All rights reserved.
Issued 11.11
*H-2000-2298-11* Part no. H-2000-2298-11-A