Printer Driver. for Windows 7. User s Manual

Printer Driver for Windows 7 User’s Manual Regarding this manual This manual explains how to install Windows Printer Driver and how to use it. Thi...
Author: Frank Bailey
43 downloads 1 Views 2MB Size
Printer Driver for Windows 7

User’s Manual

Regarding this manual

This manual explains how to install Windows Printer Driver and how to use it. This Printer Driver can be used with Microsoft Windows 7.

1

Index

1. 1.1. 1.2. 1.3. 1.4. 1.5.

2.

INSTALLATION METHOD................................................................................3 Install TCP/IP Port......................................................................................................................................................... 3 Add “KM-4800w TCP/IP Port”.................................................................................................................................... 7 Add Printer....................................................................................................................................................................11 About Printer Port........................................................................................................................................................18 About reinstall of Printer..............................................................................................................................................20

SETTING ITEM OF PRINTER DRIVER ....................................................25

2

1. 1.1.

Installation Method Install TCP/IP Port 1. Insert Installation Disk in CD-ROM drive. 2. Open “(the optical drive)\Software\PrinterPort\”. Right-click on “KM4800wTcpMon_xxx.exe” and select “Run as administrator”. (xxx is the version)

[Use Account Control] message will appear. Click “Yes”. 3. Click “OK”.

3

4. Click “Next”.

5. Click “Install”.

4

6. Please wait while the wizard is installing the components.

7. Click “Finish”.

5

If the following message appears, click “This Program installed correctly”.

TCP/IP port installation is completed.

6

1.2.

Add “KM-4800w TCP/IP Port” 1. Point “Start Menu” and click “Devices and Printers”.

2. Click “Fax” and then “Print server properties”.

7

3. “Print Server Properties” is displayed. Open “Ports” and click “Change Port Settings”.

4. Click “Add Port”.

8

5. Select “KM-4800w TCP/IP Port” and click “New Port”.

6. Enter the KM-4800w’s IP address or host name. Click “OK”.

7. Click “Close”.

9

8. Confirm that “KM-4800w TCP/IP Port” is displayed in the list. Click “Close”.

Adding “KM-4800w TCP/IP Port” is completed.

10

1.3.

Add Printer 1. In “Devices and Printers”, click “Add a printer”.

2. Choose “Add a local printer”.

11

3. Choose “Use an existing port:” and then select “KM-4800w:192.168.100.10 (KM4800w TCP/IP Port)” in the pull down menu. Click “Next”.

4. Click “Have Disk”.

12

5. Click “Browse”.

6. Specify “K48PREN.INF” at “(the optical drive)\Software\PrinterDriver\EN\” Click “Open”. English: specify \Software\PrinterDriver\EN\ K48PREN.INF French: specify \Software\PrinterDriver\FR\ K48PRFR.INF German: specify \Software\PrinterDriver\DE\ K48PRDE.INF Italian: specify \Software\PrinterDriver\IT\ K48PRIT.INF Spanish: specify \Software\PrinterDriver\ES\ K48PRES.INF

13

7. Click “OK”.

8. Click “Next”.

14

9. If KM-4800w Printer Driver is already installed on your system, the following screen appears. Select “Replace the current driver” and click “Next”.

10. Printer name can be changed at your option. Click “Next”.

15

11. Check “Always trust software from “KYOCERA MITA Corporation”.” and click “Install”.

12. Click “Finish”.

16

13. Confirm that “KM-4800wEN” is added in “Printers and Faxes”.

Installation of printer has been finished.

17

1.4.

About Printer Port In “Devices and Printers”, select “KM-4800wEN” and click “Print server properties”.

Open “Ports” and then click “Change Port Settings”.

18

Select “KM-4800w TCP/IP Port” and then click “Configure Port”.

The following information is indicated.

You do not have to change any of the above settings in usual case. Change these settings when KM-4800w does not wake up correctly from the Power Save Mode caused by the network settings. MAC Address: MAC Address of output printer Broad Cast Address: An address used to send the data to all PC on the network Magic Boot Port: Port number to send the data Timeout: Timeout when no response comes from the output printer Retry: Number of retry when no response comes from the output printer 19

1.5.

About reinstall of Printer In “Devices and Printers”, select a KM-4800wEN you want to remove and then right click “Remove device”.

Click “Yes”.

20

In “Devices and Printers”, click “Fax” icon and then click “Print server properties”.

Open “Drivers” and then click “Change Driver Settings”.

21

Select “KM-4800wEN” and then click “Remove”.

Select “Remove driver and driver package” and click “OK”.

Click “Yes”.

22

Click “Delete”.

Click “OK”. If the removal of the driver is failed, reboot the PC, and then try to remove the driver again.

23

Click “Close”.

Now the system is ready to be reinstalled KM-4800wEN.

24

2.

Setting item of Printer Driver If the setup conditions of the application is not correct, documents may not be printed properly. Point “Start Menu” and click “Devices and Printers”. Select the printer you have installed by right clicking, and then open “Printing Preferences”.

25

Each setting item in “General Setting” Tab is explained in below.

Specify the size of paper used for printing.

26

If “Custom Size” is selected in the above setting, the following dialog is indicated. A paper size can be specified at your option within the following range. Width: 100 mm to 914.4 mm Height: 100 mm to 10000 mm

If “Fit Page” is selected with checking “Scaling”, the printing image is automatically enlarged or reduced just to fit the paper size selected on “Output Paper”.

27

If “Percent” is selected with checking “Scaling”, the printing image is enlarged or reduced according the value specified on “Magnification”. Available setting range for Magnification is from 20 to 500%.

Orientation of paper can be selected. The printing image is rotated in a 180 degrees arc revolution against the paper. Number of prints can be specified ranging from 1 to 999. Checking “Collate” enables to print sets with collating.

28

Each setting item in “Output Setting” Tab is explained in below.

The source of paper can be selected. The type of printing media can be selected. Multiple images can be printed on 1 sheet of printing media. 16 images is the maximum number of images available to print on 1 sheet of printing media. Printing resolution can be specified ranging 300 and 600dpi. A mirror image can be printed when ON. A negative image can be printed when ON.

29

Printer Driver for Windows 7 User’s Manual 2010. 1 Rev. 1.0 The Copyright Act protects this manual.

It is prohibited to copy or duplicate all or a part of this manual without permission.

30