Prices and VAT
Lifetime guarantee
Prices and VAT are correct at the time of printing. If circumstances mean that you are VAT exempt or a registered charity you will need to complete a VAT exemption form prior to purchasing. To request a form please contact the Impey Showers head office.
Impey Showers Limited guarantees its range of branded showering products against faulty materials or manufacture for a Lifetime, provided that they have been installed and maintained in accordance with the manufacturer’s instructions.
Placing an order All orders must be confirmed by fax, post or email. If the order is received before 2:30pm Impey endeavour to deliver stock orders the next working day. A Saturday morning delivery is possible, but at an additional charge. Contact Customer Services for further details. Non stock / special orders For non stock and special order items delivery time scales may be extended. Our sales team can confirm a delivery time when you place your order. Supply of special option doors is typically 3-5 working days. Please note that special order items are non-returnable. Payment Accounts payable 30 days from date of invoice to approved customers. Cheques are to be made payable to Impey Showers Limited. Most credit and debit cards accepted. Carriage charges Carriage is included on all orders over £150.00 excluding VAT. (UK mainland only) Deliveries All orders are despatched using a fully insured carrier service. We can arrange delivery anywhere within the UK provided we are supplied with a full postal address and contact telephone number.
The guarantee extends to non-electrical products in general use and excludes normal wear and tear. For products such as taps, shower valves, bathroom accessories, waterproofing and electrical products, the standard manufacturer’s guarantee will apply. Where products included in the Lifetime guarantee are used for commercial use, such as hospitals, nursing homes or hotels, a 5 year guarantee will be applicable. Parts that are defined as wearing parts, such as seals, seat pads etc, are subject to a 5 year guarantee. If in our opinion the product has been modified, neglected, misused or is the subject of accidental damage the guarantee will not be applicable. Impey Showers Limited has a policy of continuous improvement and therefore reserves the right to revise or amend the specification of any product without notice. In situations where a product has failed, subject to the terms of the guarantee, and a direct replacement is no longer available, Impey Showers Ltd will replace it with the nearest equivalent product. The liability of Impey Showers Limited does not extend to consequential loss or damage arising from the defective product and is limited to the price of the original goods supplied by Impey Showers Limited. The guarantee is in addition to your statutory rights.
Return policy Every care should be taken when placing your order, but should your goods be deemed unsuitable, we will happily arrange a collection within 30 days of date of invoice, providing your goods are still packaged as new. A small fee may apply for this service and special order items are exempt from this policy. Product specification Due to our policy of continual improvement we reserve the right to change product specification without notification.
Impey Showers Limited, Conquest Business Park, Ilton, Somerset, TA19 9EA Switchboard: 01460 256 080 Sales: 01460 256 090 Technical Helpline: 01460 258 682 Fax: 01460 259 800 www.impeyshowers.com Email:
[email protected] facebook.com/impeyshowers twitter.com/impeyshowers A Coram Group Company
ISO9001:2008
ISO14001:2004
May 2012
Care Solutions May 2012
SHOWERING FOR THE CARE MARKET
02
Solutions for every care requirement Impey Showers has a great heritage. Since we pioneered the Level-Dec wetroom floor former over a decade ago we have continued to innovate and lead the market. Over 250,000 wetrooms have been successfully installed using Impey products and we are pleased to have improved the lives of many thousands of people. But wetrooms are not the only thing we offer, there’s also a wide choice of shower trays, shower doors, hand rails, seats and showers, which have been inclusively designed for lifetime homes and are therefore suitable for everyone.
CONTENTS Why choose Impey?.................................. 4
Taps.................................................................... 38
Shower planning guide............................. 6
Shower seats & hand rails........................ 40
Wetroom floor formers........................... 8
Curtain rails..................................................... 47
Shower trays.................................................. 14
Doc M packs & toilet plinths................. 48
Shower doors................................................ 18
Automatic shower toilets....................... 50
Shower screens............................................ 23
Shower drainage options......................... 52
Shower door options................................ 24
Electric showers and waste pumps..... 54
Cubicles............................................................ 28
Pumped shower drainage........................ 56
Showers........................................................... 32
Accessories..................................................... 58
03
Why choose Impey? Innovations that make life easier Innovations can be found everywhere across the Impey range; original ideas that redefine what’s possible, adding value and bringing real installer and customer benefits.
Failsafe quality and reliability We use only the best materials and rigorous construction methods to ensure the greatest quality and reliability. We are so confident in the long lasting performance of our products that we offer a lifetime guarantee.
Cost saving installation Most of our products can be easily fitted by a single installer and Impey have a well earned reputation amongst installers thanks to our carefully considered product design, which ensures minimal installation time.
Supply Chain Solutions Our Supply Chain Alliance can help to ensure the most cost effective and efficient completion of your project. To find out how, please request a copy of our Supply Chain Solutions brochure.
Unbeatable service All standard products can be dispatched and delivered within 24 hours with timed deliveries. Special order products can be delivered within 3 to 5 days.
Unrivalled technical support Every member of the sales team is fully qualified to advise on all aspects of our products and installation. We also have a dedicated Technical Helpline, which offers you instant access to our unmatched specialist knowledge.
04 18
05 19
Shower planning guide
Step 1: Shower Floors
Step 2: Drainage
If you require level access then creating a wetroom floor using a floor former is the ideal solution.
Provided that the drainage can be recessed into the floor, you can have any of the Step 1 options. Waste gullies for gravity drainage are supplied as standard, but we also offer alternative waste gully options including pumped drainage – see pages 52-53.
Ideal for wooden or solid floors
Level-Dec wetroom floor formers are the easiest way to provide the gradient for efficient drainage of a wetroom floor – see pages 8-11
For situations where the waste gulley cannot be recessed into the floor we have the Mendip range of trays, where the waste gully is housed in the base of the tray.
Ideal for new concrete floors
Level-Grade is an alternative option for wetroom installations featuring new pour concrete floors – see page 12-13
As an alternative to wetroom floor formers we offer a range of shower trays, which are available with sloping ramps to provide the easiest access.
Shower trays with above the floor drainage
Mendip shower trays allow for the drainage to be housed in the base of the tray. Optional ramps or half height steps are also available – see page 17
Shower trays
We offer a wide range of shower trays with optional ramps – see page 14-17
06
Step 3: Shower Doors
Step 4: Showers and Accessories
Once you have selected the size of wetroom floor former or shower tray you can then choose from a wide range of hinged folding or sliding doors, which can all be supplied left or right handed – see page 18.
We offer a wide range of showers, shower seats, hand rails and specialist W/C’s – see pages 32-58. Fully fitted, self contained cubicles are also available - see page 28-31.
A complete range of showers and accessories - see pages 32-58
Right hand sliding doors
Left hand sliding doors
Right hand folding doors
Left hand folding doors
Fully fitted, self contained shower cubicles are also available - see page 28-31
07
WETROOM FLOOR FORMERS
Level-Dec Level-Dec wetroom floor formers are the easiest way to create the gradient for efficient drainage in a wetroom floor. They are ideal for wooden or concrete floors and are quick and easy to install, with the strength and rigidity to support up to 300kg.
For full details see back cover
√ The UK’s leading wetroom specialist √ Over 250,000 installations in the UK √ Lifetime Guarantee Drainage
Level-Dec Floor Former provides the gradient for efficient drainage Note: For concrete floors the Level-Dec is simply recessed into the floor and bedded on a cement mix
08 18
09 19
LEVEL-DEC Level-Dec can be trimmed by up to 50mm† on the perimeter. To download an installation guide please visit our website www.impeyshowers.com Please note: when selecting shower doors or a glass panel they need to be located on the inside edge of the 50mm flat border of the Level-Dec, which makes the showering area slightly smaller.
All Level-Decs are supplied with a WSF1/H floor gully within horizontal outlet as standard, which is designed for vinyl floors, for alternative drainage options see page 52. Wetrooms can also be fitted with tiled floors using a waterproof membrane and a range of drainage options - please see our website for details.
† See specific data for each Level-Dec
600 320
320
650
800
320
1200
650
50
900
50
50
50
900
1000
320
320
320
600
1000
1300
1200
Size: 900 x 900mm
Size: 1000 x 1000mm
Size: 1200 x 1200mm
Size: 1300 x 800mm
Max Shower Area: up to 850 x 850mm Trimable Area: up to 50mm on the external edges
Max Shower Area: up to 950 x 950mm Trimable Area: up to 50mm on perimeters
Max Shower Area: up to 1150 x 1150mm Trimable Area: up to 50mm on perimeters
Max Shower Area: up to 1250 x 750mm Trimable Area: up to 50mm on perimeters
Code: LD2
Code: LD7
Code: LD1
Code: LD16
850
740
740
1500
1400
1700
1700
Size: 1400 x 900mm
Size: 1500 x 800mm
Size: 1700 x 750mm
Size: 1700 x 850mm
Max Shower Area: up to 1350 x 850mm Trimable Area: up to 50mm on perimeters
Max Shower Area: up to 1450 x 750mm Trimable Area: up to 50mm on perimeters
Max Shower Area: up to 1650 x 700mm Trimable Area: up to 50mm on perimeters
Max Shower Area: up to 1650 x 800mm Trimable Area: up to 50mm on perimeters
Code: LD6
Code: LD3
Code: LD14
Code: LD15
175
925
800
175 50
Trimable by 75mm
900
Trimable by 200mm
Trimable by 200mm
580
320
Trimable by 75mm
The LD5 features a structural upstand as part of the design. This is essentially a raised border on 2 sides, which allows the drain to be positioned as close to the corner as possible, whilst maintaining strength and rigidity. The structural upstand of the LD5 must not be trimmed as this will affect its structural integrity.
800
1850
Size: 1850 x 900mm Max Shower Area: variable Trimable Area: as marked on drawing Code: LD8
Size: 800 x 800mm Max Shower Area: up to 750 x 750mm Trimable Area: up to 50mm on the external edges Code: LD5
For compatible shower door sizes see page 18 10
850
750 50
50
50
800
900
370
320
320
650
370
700
50
700
LEVEL-DEC ADVANCE Making installation even easier Level-Dec Advance solves the potential installation problem of the drainage point being obstructed by joists within timber floors. A unique and revolutionary Impey drainage feature allows the installer to rotate the drainage point through 360° to any position that will avoid the joist, or other under floor obstructions.
All Level-Decs are supplied with a WSF1/H floor gully within horizontal outlet as standard, which is designed for vinyl floors, for alternative drainage options see page 52. Wetrooms can also be fitted with tiled floors using a waterproof membrane and a range of drainage options - please see our website for details.
Simply place the Level-Dec Advance where it will be installed and if the trap gully position interferes with a joist, just rotate the centre section until the trap is clear of it and fit the gully.
360° rotating centre section designed to allow the trap and gully to avoid joists
Level-Dec Advance is supplied with a WSF1/H floor gully with horizontal outlet as standard, for alternative drainage options see page 52.
1500 1200
Size: 1050 x 1050mm
Size: 1200 x 900mm
Size: 1500 x 1200mm
Size: 1650 x 750mm
Code: LDA54
Code: LDA51
Code: LDA52
Code: LDA53
750
900
1200
Adjustable (370 to 530)
1650
Adjustable (745 to 905)
1050
Adjustable (45 to 625)
Adjustable (520 to 680)
Adjustable (295 to 455)
1050
Adjustable (445 to 625)
Adjustable (520 to 680)
Adjustable (670 to 850)
For compatible shower door sizes see page 18 11
LEVEL-GRADE The alternative solution Level-Grade provides a quick and easy alternative way of creating the perfect gradient for concrete solid floors. Colour coded modular sections quickly click together to form a matrix that you simply fill with screed.
1
2
3
Chase out the sub-floor to accommodate the waste trap and pipe work.
First you locate the 600mm square starter section and mark the position of the feet and waste trap.
Assemble and fit the remaining sections, ensuring that each section is level.
Please note that when installing you will need to refer to the full fitting instructions, which are included in every Level-Grade pack 600mm
Fill the matrix with a fairly dry mixed screed and float over the surface so that the ridges of the Level-Grade are just visible. Note: shuttering required when filling the screed area.
600mm
300mm
150mm
300mm
All Level-Grade options are supplied as standard with the WSF1/H floor gully with a horizontal outlet. Other drainage options are also available – see page 52.
150mm
300mm
150mm
Ø202mm
150mm
4
450mm
300mm
Spacer
Adjustable foot
12
Foot mounting plate
Insulation board mounting plate (if required). Pack of 25 Code: SCR08/2
Standard sizes & bespoke options Level-Grade is available in eight standard sizes (shown below), or we can provide bespoke options please call our technical advisory team on 01460 258682.
1200
1200
1200
1050
900
1050
900
900
Shower door specifications For shower door specifications please see page 20. Door options for Level-Grade sizes LG1 - 4 are shown on pages 24-25. For larger sizes LG5 - 8 bespoke doors are required - please supply dimensional drawings.
Size: 900 x 900mm
Size: 1050 x 1050mm
Size: 1200 x 900mm
Size: 1200 x 1200mm
Code: LG1
Code: LG2
Code: LG3
Code: LG4 1500
1800
1500
1350
1050
1500
900
1350
Size: 1350 x 1350mm
Size: 1500 x 1050mm
Size: 1500 x 1500mm
Size: 1800 x 1200mm
Code: LG5
Code: LG6
Code: LG7
Code: LG8
Impey Bath Adapter for Lifetime Homes Making installation even easier The government initiative to provide sustainable homes means that those involved with the development of new housing need to consider the impact, both on the environment and the changing needs of the tenant. The lifetime homes* standard will become a mandatory part of the code for sustainable homes and one of the criteria to meet this standard is the provision of drainage that enables a shower to be fitted in the future. The Impey bath adapter allows you to install a wetroom floor, with a bath above to meet the needs of tenants today, whilst allowing for a simple and economical conversion to a level access wetroom, to suit future requirements.
58 43
*In a 176 page document titled ‘Lifetime Homes, Lifetime Neighbourhoods’ the Department of Health and the Department for Work and Pensions set out a national strategy for housing in an ageing society. The government aims for all public and private sector housing to conform to lifetime homes standards by 2013.
Bath waste trap connects to shower waste gully
Impey Bath Adapter Code: TAD/BC
42
13
Shower trays We offer a wide range of shower trays to suit all types of applications. Our Slimline 35 shower trays are only 35mm high to provide easy access and they are also available with a ramp, which is ideal for wheelchairs. Our Mendip range is designed to house the waste gully beneath the shower tray, which is ideal for installations where the floor cannot be breached. A separate ramp, or step is also available to provide easier access. All shower trays come complete with a high quality waste gully.
Ramps are available to make access easier 14
For full details see back cover
15
NEW SLIMLINE 35 SHOWER TRAyS The new, most stylish slimline tray from Impey offers a low-level installation only 35mm high They can also be recessed into the floor or fitted with a sloping ramp around the entire perimeter for easier access. Robust GRP construction will support up to 250kg (40 stone). Service ducting to conceal pipe work is available, which makes installation easier by removing the need to chase out the floor or walls. 298mm
348mm
298
mm
Size: 800 x 800mm
397mm
348
mm
Size: 900 x 900mm
Code: SL358080
Code: SL35100100
m
498m
m
548m
498m
8m
8 24
34
m
mm
m
3m 27
Size: 1200 x 750mm
Size: 1200 x 900mm
Size: 1300 x 700mm
Code: SL3512075
Code: SL3512090
Code: SL3513070
m
540m
m
m
498m
648m
3m 27
3m 27
27 3m
Code: SL3513075
m
m
m
Size: 1300 x 750mm
Size: 1500 x 750mm
Size: 1700 x 750mm
Code: SL3515075
Code: SL3517075 (can be cut to length. End cap supplied)
Slimline 35 Service Ducting and Ramp Kit Corner piece Code: SDC/I90
m
Size: 1000 x 1000mm
Code: SL359090
m
397 m
Versatile installation Can be recessed into floor for level access
Service ducting 1.5m Code: SD1 2.4m Code: SD2
Infil post Code: DP1 Access Ramp Kit 2m length Code: 2MR
Tiling upstand (supplied with each tray)
Corner Section Code: RCS
16
Waterproof self adhesive tiling upstand (3.5m roll - 120mm wide) Code: US12350
All supplied with 90mm trap. Code: IMOR/H Alternatives available see page 53
MENDIP Shower trays Built-in waste gully for ease of installation These are for installations where the floor cannot be breached, as is often the case in situations such as multi-storey apartments. The waste gully is housed beneath the tray, which is 100mm high. A 50mm half step or a sloping ramp are also available to provide easier access.
Size: 900 x 900mm
Size: 1000 x 1000mm
Size: 1250 x 710mm
Code: MEN501
Code: MEN601
Code: MEN101
Size: 1250 x 830mm
Size: 1500 x 710mm
Code: MEN201
Code: MEN301
Size: 1500 x 830mm
Size: 1850 x 710mm
Code: MEN401
Code: MEN701 (cut to length version with two end caps supplied - trim with suitable power tool)
Access Ramp
50mm Half Step
900mm x 400mm
720mm x 300mm
Tiling upstand
Code: MEN/R01
Code: MEN/P01
(supplied with each tray)
Waterproof self adhesive tiling upstand (3.5m roll - 120mm wide) Code: US12350
All Mendip trays include a factory fitted waste trap The compact above ground waste has a swivel outlet for drainage positioning. It has a 40mm outlet and a 50mm water seal. Designed to be used with single feed instantaneous electric showers and medium flow mixer valves.
17
SHOWER DOORS Unbeatable quality Impey showers doors are widely recognised as the best and the industry benchmark. They have been developed from long consultation with both end users and care professionals and are built to the highest standards, with extra safety features such as curved edging and tough anti-shatter panels. There are many configurations and bespoke options available to answer every customer requirement. Our sliding door sets can also be separated for easy access cleaning.
Silver finish is also available for selected bi-fold doors 18
19
SUPREME SLIDING/FOLDING DOORS Sliding Doors Sliding doors are usually specified for alcove configurations (although there are folding options available). These doors are particularly useful when used with a trimable shower tray/dec as they provide a greater degree of adjustment. Sliding doors can be separated for easy cleaning. Available in left or right hand configurations.
Right hand sliding doors
Left hand sliding doors
Option 5 sliding doors with 400mm fixed panel and floor to ceiling pole (left hand option shown)
Folding Doors Folding doors are usually specified for corner configurations and are available with 400mm wide fixed panels and floor to ceiling support pole. Bi-folding doors are particularly suitable for confined spaces and our patented 360o full length intermeshing hinge provides greater strength, rigidity and water resistance. Available in left or right hand configurations.
Right hand folding doors
20
Left hand folding doors
Silver finish is available for a range of Option H folding doors – see selector charts on pages 24-27
Dimensions
Operating features
All doors are 750mm high with a wide choice of configurations to fit all our Level-Dec, Level-Grade and shower tray options – see selector charts on pages 24-27. Special sizes and bespoke designs are available on request - please supply dimensional drawings.
All doors have magnetic closing seals with 180˚ rise and fall wall hinges, to lift the flexible floor seal when opening and closing. Hinges on our folding doors are a 360° full length intermeshing design for greater strength. Sliding doors have easy-glide nylon runners, plus they can be easily separated for thorough cleaning.
Materials and finishes A strong and lightweight white powder coated frame with grey handles, trim and flexible floor seals, plus semi-transparent anti-shatter PETG panels. Selected options also available in silver finish (see opposite).
Flexible floor seals
Rise & fall hinges
Coloured handles available on request.
Easy to install features Wall channels allow for 20mm adjustment for out of true walls and our unique coving system on doors provides a faster and neater installation.
360° full length intermeshing bi-fold hinges
Sliding doors separate easily for cleaning
Guaranteed quality
Unique coving system
All doors are covered by our lifetime guarantee, (excluding seals which are guaranteed for 5 years).
For full details see back cover
freestanding screens Lightweight portable freestanding shower screens offer an instant solution for shower areas that do not require a permanent fixture. 750mm high, powder coated frames with grey handles, trim and flexible floor seals. Semi-transparent, anti-shatter PETG panels.
Freestanding two panel folding screens
Freestanding four panel folding screen
Size: 2 x 650mm wide Code: IPS1 Size: 2 x 750mm wide Code: IPS2 Size: 2 x 1000mm wide Code: IPS3
Size: 2 x 400mm wide + 2 x 225mm wide Code: IPS4
21
NEW IMPEY FREEDOM SHOWER DOORS Shower doors that you can open and close at a touch Impey Freedom offers a unique air assisted hinge, operated by a small lever that lifts the door clear of the floor. This helps to provide smooth operation and prolong the life of the seal. Once closed, a gentle push down secures the door in position and provides the most watertight seal.
Tried and trusted technology The heart of the Impey Freedom Shower Door is the spring mechanism. It is completely maintenance free and covered by a lifetime guarantee, the utmost assurance of its long lasting durability.
For full details see back cover
Class leading features Impey shower doors are widely recognised as the best in the industry and our new Impey Freedom range is no exception. It features a strong and lightweight white powder coated frame with grey control levers and trim, plus anti-shatter PETG panels. The rubber floor seals also have a unique profile and end insert to ensure the most watertight seal possible.
You have the choice of 4 options which can be supplied in either left or right hand configurations Options for corners
Option E
22
Option H
Options for alcoves
Option G
Option M
With Impey Freedom you simply press a lever to raise the door off the floor
A quick press on the hand grip returns the door to the floor and secures it in position
The spring mechanism used has been tested for over 40,000 operations without failure
SUPREME GLASS SHOWER PANELS Luxury combined with practicality Supreme Glass Shower Panels from Impey have been designed to bring a truly luxurious finish to your shower room while providing practical support and ease of entry to the shower zone. Suitable for use with Impey shower trays or wetroom floor systems the Supreme Glass Shower Panels are 2 metres high and available in 3 widths. The panels are formed from 8mm safety glass.
For full details see back cover
Note: For areas where a coved vinyl floor covering has been installed you will need to order a coved wall bracket in addition to the screen.
Size options Size: 760mm code: USC76 Size: 900mm code: USC90 Size: 1200mm code: USC120 Coved wall bracket: CPEP1
Panels are supplied with a 2.6 metre adjustable floor to ceiling support pole that is finished in polished aluminium.
Suitable for use with Impey shower trays and wetroom floor systems.
23
WETROOM FLOOR door options for corners All corner options can be supplied with L-shaped curtain rail and curtain. All door configurations are available left or right handed (left hand illustrated).
Floor Former Level-Dec or Level-Grade* Level-Dec Advance or Level-Grade*
Option C
Option D
Option E
Fixed 750mm wide half height fixed panel, floor to ceiling pole
Two fixed half height panels, one 400mm on front, with floor to ceiling poles with one door hung from each panel
400mm fixed half height panel with floor to ceiling pole and a pair of bi-fold doors meeting on corner
CODE SIZE LD16 or LG1* 900 x 900 LD2 or LG2* 1000 x 1000 LD7 or LG4* 1200 x 1200 LD1 1300 x 800 LD6 1400 x 900 LD3 1500 x 800 LD14 1700 x 750 LD15 1700 x 850 LD8 1850 x 900 LD5 with upstand 800 x 800 LDA54 1050 x 1050 LDA51 or LG3* 1200 x 900 LDA52 1500 x 1200 LDA53 1650 x 750
• • • • • D • • • D • • • D • • • D • • • • • • • • • • • • • • D • • • • • •
• Standard options † Silver door options also available D Freedom door options also available
WETROOM FLOOR door options for ALCOVES All alcove options can be supplied with straight curtain rail and curtain. All door configurations are available left or right handed (left hand illustrated).
Floor Former Level-Dec or Level-Grade* Level-Dec Advance or Level-Grade*
24 18
Option G
Option M
Option 2
Two half bi-fold doors meeting in the middle
One bi-fold door meeting fixed 400mm panel with floor to ceiling pole
One set of sliding doors hung off one side latching on opposite wall
CODE SIZE LD16 or LG1* 900 x 900 LD2 or LG2* 1000 x 1000 LD7 or LG4* 1200 x 1200 D LD1 1300 x 800 D D LD6 1400 x 900 D D LD3 1500 x 800 D D LD14** 1700 x 750 D D LD15** 1700 x 850 D D LD8** 1850 x 900 LD5 with upstand 800 x 800 LDA54 1050 x 1050 LDA51 or LG3* 1200 x 900 D LDA52 1500 x 1200 D D LDA53 1650 x 750
• • • • • • •
• • • • • • •
• • •
• • •
• Standard options † Silver door options also available D Freedom door options also available
• • • • • • • • • •
Option H
Option J
Option 1
Option 6
Two half height bi-fold doors meeting on the corner
One bi-fold and single door meeting on the corner
Pair of sliding doors meeting on the corner
Fixed 400mm half height panel, floor to ceiling pole with pair of sliders meeting a return pair of sliders on the corner
•D •D •D •D •D •D •D • • •
† † † † † †
† †
• • • • • •
• • • • • •
• • •
• • • •
Option 3
Option 4
Option 5
One fixed half height 400mm panel with floor to ceiling pole and one sliding door hung from opposite wall
Pair of sliding doors hung between walls meeting in middle
One 400mm fixed half height panel with floor to ceiling pole, one sliding door hung off pole and latching on opposite wall
• • • • • • •
• • • • • • •
• • • • • • •
• • •
• • •
• • •
**Door options for LD14, LD15 and LD8 are only suitable if they are fitted full size (not trimmed to length).
• • • • • • • • • •
25 19
SHOWER TRAy DOOR OPTIONS FOR CORNERS All corner options can be supplied with L-shaped curtain rail and curtain. All door configurations are available left or right handed (left hand illustrated).
Shower tray Slimline 35
Mendip
CODE SL358080 SL359090 SL35100100 SL3512075 SL3512090 SL3513070 SL3513075 SL3515075** SL3517075** MEN501 MEN601 MEN101 MEN201 MEN301 MEN401 MEN701**
Option C
Option D
Option E
Fixed 750mm wide half height fixed panel, floor to ceiling pole
Two fixed half height panels, one 400mm on front, with floor to ceiling poles with one door hung from each panel
400mm fixed half height panel with floor to ceiling pole and a pair of bi-fold door meeting on corner
SIZE 800 x 800 900 x 900 1000 x 1000 1200 x 750 1200 x 900 1300 x 700 1300 x 750 1500 x 750 1700 x 750 900 x 900 1000 x 1000 1250 x 710 1250 x 830 1500 x 710 1500 x 830 1850 x 710
• • • • • • • • • • • • • • • •
• • • • • •
•D •D •D •D •D •D
• • • • •
• • • • •
• Standard options † Silver door options also available D Freedom door options also available
SHOWER TRAy DOOR OPTIONS FOR ALCOVES All alcove options can be supplied with straight curtain rail and curtain. All door configurations are available left or right handed (left hand illustrated).
Shower tray Slimline 35
Mendip
26
CODE SL358080 SL359090 SL35100100 SL3512075 SL3512090 SL3513070 SL3513075 SL3515075 SL3517075 MEN501 MEN601 MEN101 MEN201 MEN301 MEN401 MEN701**
SIZE 800 x 800 900 x 900 1000 x 1000 1200 x 750 1200 x 900 1300 x 700 1300 x 750 1500 x 750 1700 x 750 900 x 900 1000 x 1000 1250 x 710 1250 x 830 1500 x 710 1500 x 830 1850 x 710
Option G
Option M
Option 2
Two half bi-fold doors meeting in the middle
One bi-fold meeting fixed 400mm panel with floor to ceiling pole
One set of sliding doors hung off one side latching on opposite wall
• • •D •D •D •D
•D •D •D •D •D •
• • •D •D •
• • •D •D •
• • • • • • • • • • • • • •
Option H
Option J
Option 1
Option 6
Two half height bi-fold doors meeting on the corner
One bi-fold and single door meeting on the corner
Pair of sliding doors meeting on the corner
Fixed 400mm half height panel, floor to ceiling pole with pair of sliders meeting a return pair of sliders on the corner
• D †† •D† •D† •D† •D •D •D •D • † • † • • • •
• • • • • • • • • • • • • •
• • • • • • • • • • • • • •
• • • • • • • • • • •
**Door options for SL3517075 and MEN701 are only suitable if they are fitted full size (not trimmed to length).
Option 3
Option 4
Option 5
One fixed half height 400mm panel with floor to ceiling pole and one sliding door hung from opposite wall
Pair of sliding doors hung between walls meeting in middle
One 400mm fixed half height panel with floor to ceiling pole, one sliding door hung off pole and latching on opposite wall
• • • • • •
• • • • • •
• • • • • •
• • • • •
• • • • •
• • • • •
**Door options for SL3517075 and MEN701 are only suitable if they are fitted full size (not trimmed to length).
• Standard options
† Silver door options also available D Freedom door options also available
27
CUBICLES The easiest solution Impey cubicles can be quickly and easily installed with very little site preparation required. They are also the ideal solution for non-permanent adaptations. Each cubicle is purpose built to exact requirements with compact designs to accommodate a shower, hand rails and a shower seat, or larger sizes that contain a complete washroom, including a W/C and handbasin.
Shower Toilet Cubicle with W/C and hand basin. 28
29
Cubicle planning and specifications Step 1: Choose your cubicle Impey cubicles are available in 2 sided, 3 sided and Shower/Toilet Cubicle (STC) formats and in left or right hand configurations (left hand shown).
Two sided cubicles
Three sided cubicles
Shower/Toilet Cubicle
Particularly suitable for wheelchair access.
Ideally suited for enclosed spaces which may not be suitable for side opening doors.
• With option ‘H’ doors code: CUB2H (state left or right hand option) • With option ‘J’ doors code: CUB2J (state left or right hand option)
• With option ‘K’ doors code: CUB3K • With option ‘G’ doors code: CUB3G
For Shower/Toilet Cubicles, a 1500mm shower tray is required. you need to allow an additional 350mm width for the W/C support frame and cistern, which is mounted on the outside of the cubicle, behind an inspection panel. Can be supplied either left or right hand (left hand shown). • With option ‘K’ doors code: STC3K • With option ‘G’ doors code: STC3G Shower/Toilet Cubicles are supplied with a support frame to mount the wall hung w/c. A handbasin with mono block mixer tap is supplied as standard with Shower/Toilet Cubicles.
Step 2: Choice of shower door Door options for two sided cubicles (left hand shown)
30
Door options for three sided cubicles (left hand shown)
Option H
Option J
Option G
Option K
Two half height bi-fold doors meeting on the corner
One bi-fold and single door meeting on the corner
Two half bi-fold doors meeting in the middle
Pair of doors meeting in the middle
Step 3: Optional extras As optional extras, Impey cubicles can be specified with a roof panel, ceiling light/extractor fan and 3-sided cubicles can be specified with a half glazed side panel if required (please see options below). Cubicles are supplied with a white hand rail as standard (not shown). Trays, seats, shower and additional hand rails are not included and will need to be specified at the time of ordering. • Roof with light and fan code: STC/EXROOF
• Roof only code: STC/ROOF
• Half glazed side panel code: no additional cost. Specify when ordering.
Step 4: Choice of shower tray There are two styles of shower tray to choose from. For full details please see pages 14-17.
Slimline 35 Shower trays
Mendip Shower trays with above the floor drainage
Only 35mm high to provide easy access and there is also a sloping ramp kit available which is ideal for wheelchairs. For full details please see page 16.
For situations where the drainage cannot be recessed into the floor we offer the Mendip range of trays. The drainage is housed in the base of the tray. These are also available with a sloping ramp, or half height step for easier access. For full details please see page 17.
Sizes: 1200 x 750mm 1200 x 900mm 1300 x 750mm 1500 x 750mm*
Sizes: 1250 x 710mm 1250 x 830mm 1500 x 710mm* 1500 x 830mm*
* required for Shower/Toilet Cubicles If you have any questions regarding which cubicle and sizes are most suitable for your needs please call our sales team on 01460 256 090
Guaranteed quality and durability The cubicles are manufactured from durable waterproof panelling to provide a tough, easy clean finish. Each cubicle construction, including the doors and shower tray, is covered by our lifetime guarantee* (excludes door seals which are guaranteed for 5 years). All other fixtures and fittings are subject to manufacturers guarantees. *For full details of lifetime guarantee see back cover.
31
SHOWERS A range to suit all applications Impey offer a wide selection of showers from a variety of manufacturers, in order to provide you with the best choice for your requirements. The entire range features thermostatic controls, for added safety, plus you have the option of the finest quality mixer showers, or easy to install electric showers.
32
33
MIXER SHOWERS Mira Select Flex Thermostatic Mixer Shower Code: MIRASELFLEX
Technical Specification • Separate flow and temperature controls with extended levers • Thermostatic temperature stability for safe showering of +- 1°C • Adjustable maximum temperature setting for added safety • Fail safe on hot and cold supplies • ‘Cool Touch’ shower valve for added safety • ‘Everclear’ limescale resistant showerhead with single spray pattern • Extended riser rail (1m) and 2m hose • Wall or corner mounting options • Variable pipe inlet centres (139-153mm) • Inlet connection: 15mm compression • Outlet connection: ½” BSP flat face • Operating pressure range of 0.1 to 5 bar • Maximum inlet temperature: 65°C • Minimum temperature differential to achieve hot or cold failsafe: 12°C • Suitable for unvented, pressurised, combi-boiler, gravity fed and mains pressure systems • Guaranteed for 5 years
Safe Touch Thermostatic Bar Mixer Shower Code: ST10010CP
For riser rail and showerhead kits see opposite. Technical Specification • Safe touch body • Separate flow and temperature controls • Thermostatic temperature stability for safe showering of +- 2°C • Maximum temperature factory set at 41°C to prevent scalding • Fail safe on hot and cold supplies • Variable pipe inlet centres (130-170mm) • Inlet connections: G ¾" F BSP • Outlet connections: G ½" F BSP • Operating pressure range of 0.2 to 5 bar • Maximum inlet temperature: 85°C • Minimum temperature differential to achieve hot or cold failsafe: 15°C • Suitable for use with unvented, pressurised, combi boilers, gravity and mains pressure systems • Guaranteed for 5 years
34
Inta Straight Riser Rail and Showerhead Code: IN32665CP
Mood Riser Rail and Showerhead Code: IN32770CP
Mood Thermostatic Mixer Showers
Vista Thermostatic Mixer Showers
Riser Rail and Showerhead Kits
Exposed Code: IN90024CP
Exposed Code: IN90030CP Concealed Code: IN90032CP
Inta Straight Riser Rail and Showerhead Code: IN32665CP
Concealed Code: IN90025CP
Mood Riser Rail and Showerhead Code: IN32770CP
For riser rail and showerhead kits see opposite.
For riser rail and showerhead kits see opposite.
Technical Specification
Technical Specification
• Separate flow and temperature controls
• Sequential control shower valve for combined control of temperature and flow
Technical Specification
• Thermostatic temperature stability for safe showering of +- 2°C
• Both riser rail kits have a multi-function spray pattern showerhead with rub clean nozzles for easy cleaning
• Single piece thermal cartridge technology
• Both riser rail kits have a 2m hose • Both riser rail kits are guaranteed for 5 years
• Inlet pipe centres: 150mm
• Maximum temperature factory set at 41°C to prevent scalding
• Inlet connections: 15mm compression
• Fail safe on hot and cold supplies
• Outlet connections: ½" BSP (15mm compression for concealed valve)
• Inlet pipe centres: 150mm
• Operating pressure range of 0.2 to 5 bar
• Outlet connections: ½” BSP (15mm compression for concealed valve)
• Thermostatic temperature stability for safe showering of +- 2°C • Maximum temperature factory set at 41°C to prevent scalding • Fail safe on hot and cold supplies
• Maximum inlet temperature: 85°C
With Safe Touch, Mood and Vista mixer showers you have the option of two styles of riser rail kits.
• Inlet connections: 15mm compression
• Minimum temperature differential to achieve hot or cold failsafe: 10°C
• Operating pressure range of 0.2 to 5 bar
• Suitable for use with unvented, pressurised, combi boilers, gravity and mains pressure systems
• Minimum temperature differential to achieve hot or cold failsafe: 10°C
• Guaranteed for 5 years
• Suitable for use with unvented, pressurised, combi boilers, gravity and mains pressure systems
• Maximum inlet temperature: 85°C
• Guaranteed for 5 years
35
ELECTRIC SHOWERS
Mira Advance ATL Flex
Mira Advance Flex Low Pressure
9.0kW Code: MIRAFLEX90 9.8kW Code: MIRAFLEX98
9.0kW Code: MIRAFLEX/LP90
Technical Specification
Technical Specification
• Separate flow and temperature controls with push button start/stop and audible bleeps
• Pumped electric shower - the ideal choice for low pressure sites
• Large, colour contrasting rotary controls with raised areas to aid navigation • LED backlit flow and on/off buttons and audible click on temperature lever • Thermostatic temperature control for added safety
• Thermostatic temperature control for added safety • Four spray pattern showerhead with rub clean rubber nozzles for easy cleaning
• Colour contrasting panel to aid navigation
• Extended riser rail (1m) with easy one-handed adjustment of the height of the shower head, plus additional parking socket
• Adjustable maximum temperature setting for added safety
• Best in class limescale resistance
• Phased shutdown reduces limescale and ensures a cool start for added safety for the next user.
• Guaranteed for 2 years, with optional 3 year extended warranty
• 4 spray pattern showerhead with rub clean rubber nozzles for easy cleaning • Extended riser rail (1m) with wall or corner mounting options and easy one-handed adjustment of the height of the shower head • Best in class limescale resistance • Guaranteed for 2 years, with optional 3 year extended warranty For Mira Advance Flex Extra please see page 55
36
• Separate flow and temperature controls with push button start/stop and audible beeps
If you require pumped drainage, please see our specially designed range on page 54
Pack options available with remote control start/stop. Upgrade kits also available for existing Selectronic Premier Showers
Redring Selectronic Premier Plus
Triton Safeguard T100 Care
Triton T100E Thermostatic Care
8.5kW Code: SELP85P 9.5kW Code: SELP95P
8.5kW Code: TRSG
8.5kW Code: TRT1
Technical Specification
Technical Specification
• Separate temperature control with large push button start/stop with audible bleeps
• Separate temperature control and push button start/stop
• Thermostatic temperature control for added safety
• Power on and low pressure indicators
• Maximum temperature stop for added safety
• Thermostatic temperature control for added safety
• Separate temperature controls with large push button start/stop and audible bleeps
• Phased shutdown reduces limescale and ensures a cool start for added safety for the next user
• Adjustable maximum temperature setting for added safety
• Clear print control identification for ease of visibility and legibility
• Adjustable timed shutdown allows the shower to automatically shutdown after a pre-selected time
• Phased shutdown reduces limescale and ensures a cool start for added safety for the next user
• Large LED temperature readout display
• 5 spray pattern showerhead with rub clean nozzles for easy cleaning
• 2 spray pattern showerhead with soft spray option
• Extended riser rail (1m)
• Guaranteed for 2 years, with optional 3 year extended warranty
8.5kW with remote control Code: SELP85PR 9.5kW with remote control Code: SELP95PR Upgrade remote control Code: SELP/RC Upgrade receiver Code: SELP/RM
Technical Specification
• Thermostatic temperature control for added safety • Adjustable maximum temperature setting for added safety • Eco Water-Save feature that automatically calculates and adjusts the optimum flow rate.
• Guaranteed for 2 years, with optional 3 year extended warranty
• Extended riser rail (1m)
• Phased shutdown reduces limescale and ensures a cool start for added safety for the next user. • Automatic shutdown after 30 minutes of inactivity • 6 spray pattern shower head with rub clean nozzles for easy cleaning • Extended riser rail (1m) with 2m hose • Guaranteed for 3 years, with optional 2 year extended warranty
37
TAPS A choice of control We offer a wide range of taps with easy to operate leavers, featuring quarter turn ceramic discs for rapid on/off flow. For added safety and to meet NHS requirements, you will need to fit a thermostatic mixing valve to control the hot supply. Alternatively, we offer a mixer tap that provides full thermostatic control.
Intatherm Thermostatic Mixer Tap Code: IN1001CP
The alternative solution to fitting a separate thermostic mixing valve Technical Specification • Temperature adjustment range: 30°C - 50°C • Temperature stability of + 2°C • Operating pressure range of 0.2 to 10 bar • Maximum inlet temperature: 85°C • Inlet temperature range: 52°C - 65°C Hot Supply and 5°C - 20°C Cold Supply • D08 working pressure ranges: 0.2 - 1.0 Low Pressure and 1.0 - 5.0 High Pressure • Max. Temp. Differential (mix to hot) for failsafe: 10°C • Maximum pressure inlet differential: 10:1 • Maximum temperature factory set at 41°C to prevent scalding • Guaranteed for 5 years
Intamix Thermostatic Mixing Valve 15mm Code: IN40015CP
22mm Code: IN40022CP
15mm with isolator valves Code: INMX15CP
22mm with isolator valves Code: INMX22CP
Intamix thermostatic failsafe mixing valves deliver temperature controlled hot water for baths, basins or showers that complies with NHS Estate D08. They are highly resistant to scaling, with an anti-tamper proof head and are available with 15mm or 22mm connections. Technical Specification • Temperature adjustment range: 30°C - 50°C • Temperature stability of +/- 2°C • Operating pressure range of 0.2 to 10 bar • Maximum inlet temperature: 85°C • Inlet temperature range: 52°C - 65°C Hot Supply and 5°C - 20°C Cold Supply • D08 working pressure ranges: 0.2 - 1.0 Low Pressure and 1.0 - 5.0 High Pressure • Max. Temp. Differential (mix to hot) for failsafe: 10°C • Maximum pressure inlet differential: 10:1 • Maximum temperature factory set at 41°C to prevent scalding • Guaranteed for 5 years
38
3" Lever Action Sinks Taps Code: DLT103
Technical Specification • Can be fitted with a flow regulator to reduce water wastage • Minimum working pressure 0.2 bar • Recommended working pressure 0.3 bar • Guaranteed for 12 years
3" Lever Action Basin Taps Code: DLT101
Technical Specification • Can be fitted with a flow regulator to reduce water wastage • Minimum working pressure 0.1 bar • Recommended working pressure 0.2 bar • Guaranteed for 12 years
3" Lever Action Monobloc Basin Mixer with Pop-up Waste Code: DLT113
Technical Specification • Can be fitted with a flow regulator to reduce water wastage • Minimum working pressure 0.2 bar • Recommended working pressure 0.3 bar • Guaranteed for 12 years
Lever Operated Spray Mixer Code: LO980CP
Technical Specification • Minimum operating pressure 1 bar • Maximum operating pressure 5 bar • Recommended working pressure 2-5 bar • Maximum inlet temperature 65°C • Guaranteed for 2 years
39
SHOWER SEATS & HAND RAILS For added safety and comfort All of our seats can be fitted at varying heights, with easy-clean padded vinyl options for extra comfort. The incredibly strong powder coated frames allow the majority of the range to support up to 190kg. For added safety, we offer a wide selection of hand rails, including our unique and innovative Maxi-Grip range.
The innovative Maxi-Grip Plus hand rail system 40
41
SHOWER SEATS Overall Width
All of our seats are robust, can be fitted at varying heights and have durable powder coated frames. Several also have detachable vinyl seat covers (as indicated) for ease of cleaning.
Seat Width
Please note all dimensions are approximate
Seat Depth
Max. Seat Height
Distance from wall in raised position
Min. Seat Height
The seats carry a maximum weight limit of 30 stone (190 kg) unless stated otherwise. Some seats from the range require minimal assembly.
Overall Depth
Outer Arm Width Inner Arm Width
25
YEAR
YEAR
25
Deluxe Fold Down Shower Seat Code: S1 Overall Size: W595 x D545mm Seat Size: W490 x D380 x H440-590mm Arm Size: W490 (inner) x W595mm (outer)
Deluxe Padded Fold Down Shower Seat Code: S1P
Distance from wall in raised position: 215mm Maximum Weight Limit: 30 stone (190kg)
Overall Size: W595 x D545mm Seat Size: W490 x D380 x H465-615mm Arm Size: W490 (inner) x W595mm (outer)
25
42
YEAR
YEAR
25
Padded Fold Down Shower Seat Code: S2P
Fold Down Shower Seat Code: S2 Overall Size: W490 x D470mm Seat Size: W460 x D380 x H460-540mm
Distance from wall in raised position: 98mm Maximum Weight Limit: 30 stone (190kg)
Detachable seat covers
Distance from wall in raised position: 215mm Maximum Weight Limit: 30 stone (190kg)
Overall Size: W490 x D470mm Seat Size: W460 x D380 x H485-565mm
Detachable seat covers
Distance from wall in raised position: 100mm Maximum Weight Limit: 30 stone (190kg)
Deluxe Horseshoe Padded Fold Down Shower Seat Code: S1HP Overall Size: W610 x D558mm Seat Size: W437 x D378 x H510-555mm Arm Size: W505 (inner) x W610mm (outer)
Distance from wall in raised position: 175mm Maximum Weight Limit: 25 stone (160kg)
Freestanding Shower Chair Code: S5 Overall Size: W535 x D505mm Seat Size: W440 x D380 x H480-605mm
Horseshoe Padded Fold Down Seat Code: S2HP
Freestanding Shower Stool Code: S6
Overall Size: W500 x D470mm Seat Size: W440 x D380 x H505-585mm
Overall Size: W510 x D365mm Seat Size: W395 x D265 x H470-615mm
Distance from wall in raised position: 90mm Maximum Weight Limit: 25 stone (160kg)
Detachable seat covers Distance from wall in raised position: 100mm Maximum Weight Limit: 15 stone (100kg)
Distance from wall in raised position: 100mm Maximum Weight Limit: 30 stone (190kg)
Wide Padded Fold Down Shower Seat Code: S9
Compact Padded Fold Down Shower Seat Code: S4
Overall Size: W650 x D510mm Seat Size: W590 x D420 x H510-580mm
Overall Size: W360 x D340mm Seat Size: W360 x D280 x H500-575mm
Distance from wall in raised position: 100mm Maximum Weight Limit: 30 stone (190kg)
Distance from wall in raised position: 65mm Maximum Weight Limit: 15 stone (100kg)
43
NEW maxi-grip & maxi-grip plus Maxi-Grip hand rails are a new innovation from Impey and have been developed with the help of the RNIB. The square profile improves slip resistance, whilst the unique co-polymer extrusion of Maxi-Grip Plus gives the corners of the rails a soft tactile quality for increased grip and comfort.
For full details see back cover
Maxi-Grip can support loads of upto 120kg*. The range also includes a patented adjustable angle system for 90°, 60°, 45° or 30° angles plus internal and external corners.
90° Adjustable Angle can be trimmed to 60°, 45° & 30° 45° can be trimmed to 30°
*Refers to rails only, not fixings
Available in 300, 450, 600 and 900mm lengths
Maxi-Grip Plus
Maxi-Grip 152
Available in 300, 450, 600 and 900mm lengths
152 0°
9
141
0°
45°
92mm
45°
9
76mm
40mm
50mm
141
32mm* 61mm
Adjustable Angles
Size: 300mm Size: 450mm Size: 600mm Size: 900mm
Angle: 45° White Code: IGA45W Angle: 45° Grey Code: IGA45G Angle: 90° White Code: IGA90W 450 or 600mm Angle: 90° Grey Code: IGA90G
Code: IGS30G Code: IGS45G Code: IGS60G Code: IGS90G
Maxi-Grip Hand Rail (White) Code: IGC30W Code: IGC45W 000mm Code: IGC60W Code: IGC90W
90° Adjustable Angle can be trimmed to 60°, 45° & 30° 45° can be trimmed 32mm to 30°
35mm
2750mm trimmable
Maxi-Grip Plus Hand Rail (White/Grey)
Size: 300mm Size: 450mm 000mm Size: 600mm Size: 900mm
44
(*35mm for 900mm rail)
90° Angle can be used for internal and external corners
50mm 92mm
FLUTED HAND RAILS Engineered from industrial strength plastics, our satin finished fluted hand rails provide exceptionally good grip in wet environments.
Five screw points on each elbow ensure secure and easy wall fixing, with screw cover plates 0, 450, 600 and 900mm lengths that snap able in 300, 450, 600 and 900mm lengths on easily to provide a neat, easy to clean finish.
For full details see back cover
Available in 300, 450, 600 Available in 300, 450, 600 and 900mm lengths and 900mm lengths
61mm
61mm
and 900mm lengths Code: IG1F/Blue
700mm
50mm
450 or 600mm
450 or 600mm
92mm
450 or 600mm 35mm Available in 450 x 450mm 450 x 450mm and 600 xAvailable 600mm in sizes and 600 x 600mm sizes
32mm
32mm
50mm
50mm
35mm
90mm
450 or 600mm
450 or 600mm
00mm
2750mm trimmable
92mm
35mm
90mm
50mm
2750mm trimmable
Code: IG7 Code: IG8 450 or 600mm
92mm
92mm
61mm
Angular Hand Rails (white only) Size: 450mm Size: 600mm
35mm
32mm* 32mm (*35mm for 900mm rail)32mm
32mm* (*35mm for 900mm rail) 000mm
35mm
450 or 600mm 450 or 600mm
(white only) Code: FWP 740mm
Code: IG1F Code: IG4F Code: IG5F Code: IG6F
2750mm trimmable
50mm
50mm
76mm
Size: 300mm Size: 450mm Size: 600mm Size: 900mm
Floor to Wall Hand Rail 2750mm trimmable
White Hand Rails
000mm
32mm* 32mm* Available in 300,for450, 600 rail) (*35mm 900mm and 900mm lengths (*35mm for 900mm rail)
Code: IG4F/Blue Code: IG5F/Blue
600 and 900mm lengths
40mm
Code: FCP1
50mm
92mm
Blue Hand Rails Available in 300, 450, 600 Size: 300mm Size: 450mm Size: 600mm
50mm
92mm
40mm
76mm
76mm
40mm
Floor to Ceiling Pole (white only)
PLEASE NOTE:
90mm
The Floor to Wall Hand Rail and Floor to Ceiling Pole are manufactured from mild steel with a polyester finish and have an easy grip ribbed surface.
92mm
92mm
POLISHED STAINLESS STEEL HAND RAILS Available in 450 x 450mm and 600 x 600mm sizes
Available in 450 x 450mm and 600 x 600mm sizes
90mm
90mm
Polished stainless steel offers the most stylish solution with a range of beautifully curved or straight designs. Straight Polished Stainless Steel Hand Rail Size: 355mm Size: 480mm Size: 620mm
Code: SSHR355 Code: SSHR480 Code: SSHR620
Curved Polished Stainless Steel Hand Rail
For full details see back cover
58mm
Code: CSHR355 Code: CSHR480 Code: CSHR620
84mm
Size: 355mm Size: 480mm Size: 620mm
Available in 355, 480, 620 lengths
32mm
45
m
Drop DOWN RAILS We have a large range of drop down rails to offer more assistance in the bathroom. Our robust powder coated rails are available in a variety of sizes and have additional optional extras including toilet roll holders and support legs. The drop down rails are perfect next to your WC, offering that little extra support when required. Only available in white. For full details see back cover
550
mm
250mm 1000mm
or5570m 60mm o mr7
250mm
1000mm
550
550 60m
mm
m
mm
or 7
1000mm
60m
m
250mm
250mm 1000mm
or5570m 60mm o mr7
550
mm
60m
250mm
m
250mm
or 7
60m
105mm 800mm
1000mm
1000mm
800mm
225mm
Fold Down Rails Size: 550mm Code: DR1 Size: 760mm Code: DR2 Size: 760mm (with Toilet Roll Holder) Code: DR7
46
Fold Down Rails
Floor Mounted Post (to suit any hinged rail)
Size: 550mm Code: DR5 Size: 760mm Code: DR6 Size: 760mm (with Toilet Roll Holder) Code: DR8
Code: DR3
(with supporting leg)
250mm
m 105mm
250mm 105mm
800mm
225mm
150mm225mm 150mm
150mm
CURTAIN RAILS & CURTAINS We have a large variety of curtain rails to suit all requirements. Our white powder coated aluminium rails come complete with a comprehensive fixing pack, which includes all screws, rawl plugs, ceiling support rods and eyelets.
Shower Rails
For full details see back cover
Straight Rails Size: 1300mm Size: 2000mm Size: 2500mm
Code: SR13 Code: SR20 Code: SR25
Window Bridging Kit Code: WBK1
Shower Curtains
Installation of a curtain rail can often be hampered by the position of a window. With our Window Bridging Kit this problem has now been successfully addressed. This addition to the curtain rail enables it to be fixed around the window or onto the return wall. It also comes complete with a 1200mm x 1200mm curtain to protect the window and sill from water.
• White only 100% Polyester
Note: the Window Bridging Kit can form either arrangement as shown below
• Range of sizes to suit all showering options
• CIBA Antibacterial & Fungal Protection • Easy care fabric, specially produced for the bathroom • Machine Washable • 113 grams weighted hem to ensure good contact with tray or wet floor
Depths from 900 - 1200mm
Widths from 900 - 1800mm
Corner Rails Size: W900 x D900mm Size: W1200 x D1200mm Size: W1300 x D900mm Size: W1500 x D900mm Size: W1500 x D1200mm Size: W1800 x D900mm
White Code: CR0909 Code: CR1212 Code: CR1309 Code: CR1509 Code: CR1512 Code: CR1809
Silver Code: CRS099 Code: CRS1212 Code: CRS1309 Code: CRS1509
Shower Curtains (Width x Drop)
Widths from 740 - 1330mm Depths from 860 - 1200mm
U Shaped Rails Size: W1230 x D900mm Size: W1330 x D900mm Size: W1450 x D1200mm Size: W950 x D950mm Size: W860 x D860mm Size: W740 x D810mm Size: W1150 x D1150mm Size: W1600 x D800mm Size: W1000 x D1000mm
Code: UR12390 Code: UR13390 Code: UR145120 Code: UR9595 Code: UR8686 Code: UR7481 Code: UR115115 Code: UR16080 Code: UR100100
Size: W1200 x D1200mm Size: W1800 x D1250mm Size: W1800 x D1800mm Size: W1800 x D2000mm Size: W1800 x D2400mm Size: W2000 x D1800mm Size: W2000 x D2000mm Size: W2200 x D1800mm Size: W2200 x D2000mm Size: W2200 x D2200mm Size: W2400 x D1800mm Size: W2400 x D2000mm
Code: IC1212 Code: IC180125 Code: IC1818 Code: IC1820 Code: IC1824 Code: IC2018 Code: IC2020 Code: IC2218 Code: IC2220 Code: IC2222 Code: IC2418 Code: IC2420
47
DOC M PACKS The Impey Doc M Pack is designed to provide a WC facility for wheel chair users. The pack complies with the approved document M of the building regulations 2000 and BS 8300:2001, provided that the WC facility has at least the dimensions, equipment and fittings shown in the low level and close coupled layouts shown below. The rails shown are also available in blue on request.
300
Drop Down Rail
300
Hand Rails Hand Rails
680
1100
Hand Rail and Back Pad 195
480*
*Height subject to manufacturing tolerance of WC pan Height of drop-down rails to be the same as the horizontal hand rails 2200 min.
Alternative door position
1000 min.
1500 x 1500 Wheelchair turning space
1140-160
500
Low Level Doc M arrangement
1500 min
750
WC Suite
Washbasin
Low level pan Toilets seat (ring only) 6 litre cistern & spatula cistern lever
SF basin brackets x 2 Chrome lever mixer tap Centre tap hole basin
320
With white Rails: Code: DM600WH With blue Rails: Code: DM600BL
Rails 5 x 600mm hand rails 1 x hinged support rail with toilet roll holder 1 x backrest & cushion
TOILET PLINTHS For wheel chair users and people with limited mobility conventional toilets can be too low and very difficult to use. The Impey toilet plinths have been designed to raise the existing toilet to account for these needs. Their non-intrusive design allows for greater flexibility in the bathroom and removes the need to purchase a new toilet while remaining discreet.
48
250
600
Basin Wall A
Lantac Certification The LANTAC certification scheme applies throughout England and Wales. In Scotland submission of the certificate may possibly provide evidence of compliance with Document M requirements.
300
Drop Down Rail
300
Hand Rails
680
1100
Hand Rails
480*
195
*Height subject to manufacturing tolerance of WC pan Height of drop-down rails to be the same as the horizontal hand rails 2200 min.
Alternative door position
1500 x 1500 Wheelchair turning space
1140-160
500
Close Coupled Doc M arrangement
1000 min.
1500 min
750
320
With white Rails: Code: DM601WH With blue Rails: Code: DM601BL
WC Suite
Washbasin
Close coupled pan Toilets seat (ring only) 6 litre cistern & spatula cistern lever
SF basin brackets x 2 Chrome lever mixer tap Centre tap hole basin
250
Basin Wall A
600
Rails 5 x 600mm hand rails 1 x hinged support rail with toilet roll holder
399
286
456
50
229
229
Raises the height of the toilet by 75mm
100mm Toilet Plinth Code: IP100 286
456
75 75
75 456 213 100
382
213
289
213 389
220 389
220
382
295
459
465
382
100
399
459289
289
28 382
100
286 456
389 220
220 75
399
50
229 399
Raises the height of the toilet by 100mm 456 389 213
75
75mm Toilet Plinth Code: IP75
Raises the height of the toilet by 50mm
50
50mm Toilet Plinth Code: IP50
2
399
289 459
295
459
465
49
automatic shower toilets The Clos-o-Mat Palma Vita Automatic WC shower toilet provides flushing, washing and warm air drying from one simple operation. It is user-friendly for people who have restricted use of their hands. By reducing hand contact, it also provides improved hygiene for all users.
Simultaneous flushing and washing This unique feature improves personal hygiene cleaning with water not paper. Can be used at all times as a conventional WC. Combines functions of a WC and bidet with addition of drying air. UK made in a dedicated plant. Clos-o-Mat’s unique one touch system allows the user to benefit from the toilet’s automatic functions by just pressing and releasing the flush. Wash time adjustable to client needs.
Accessories There is a range of accessories available for the Palma Vita automatic WC including seats, integrated fold down support arms, lateral body supports, plinths to raise the height and a touch pad for those who cannot use the flush button. For more information on these accessories please call us on 01460 256090.
455 165
206
730
95
95
857
75
210 300 BB = Internal frame size
50
200
272
272
410
B
200
B
620
The Aquaclean 8000plus Care shower toilet from Geberit combines all the functions of a conventional WC and bidet with the comfort of warm-air drying. Elegantly designed and with a host of convenient features as standard, it promotes a unique sense of well-being that will benefit people of any age group.
Push-button or remote control You have the option of push-button controls, or the infra-red remote, where operation is completely hands-free. A sensor simply detects movement and automatically starts the washing and drying sequence. It will even flush the WC beforehand. Height Adjustable and Strong The Aquaclean 8000plus Care can be fitted at a height to suit your needs. Its in-built plinth has been tested up to 64 St (400kg) and the ergonomically shaped seat ensures that transferring and seating is very comfortable. When the seat is lifted the automatic lowering system lowers it gently. Individually Adjustable Using the adjustable temperature and pressure regulator, you can set the shower and dryer to your liking. The oscillating shower feature ensures thorough cleaning. Easy to clean and hygienic A
960
250
250
Fused spur
B
max.870
140-280 735
max.870
140-280 735
405-525*
420
405-525*
420
Energy-saving
max.870
max.870
A The special ceramic coating is easy to clean and dirt repellent. The nozzle is rinsed in clean water both before and after each use, plus it is cleaned with a 90 solution of disinfectant and water after each use. 90 Fused spur
B 280 The Aquaclean 8000plus Care has an energy-saving 00 280 min. 4 0 in. 40 mode that the only heats themwater when the toilet 00 min. 4 00 4 . in m is in use.
51
DRAINAGE OPTIONS FOR WETROOM FLOORS Vinyl Wet Floor Shower Waste Gully for Horizontal Drainage
Vinyl Wet Floor Shower Waste Gully for Vertical Drainage
With grey cover and clamping ring Code: WSF1/H With chrome cover and clamping ring Code: UCG1/H
With grey cover and clamping ring Code: WSF1/V With chrome cover and clamping ring Code: UCG1/V
A two part shower waste gully for gravity drainage. It is supplied as standard with the Level-Dec wet floor former. It has a 50mm water seal and a 50mm outlet with a 40mm reducer if required.
A two part shower waste gully for gravity drainage. It has a 50mm waterseal and a 50mm outlet. Available with either grey or chrome cover and clamping ring
Available with either grey or chrome cover and clamping ring
200 200
62 126
216
89 216
200 200 35
86
200 200 35
200
62
89 200
126
216
126
216
200
62
89
200
200
86 126
Code: TSG2 130
200 35
130
14
35
132
16
200
130
A complete shower waste gully for gravity drainage. 86 It has a 75mm waterseal and a 110mm outlet 86 with a 50mm reducer if required.
90
16
A complete shower waste gully for gravity drainage. 110 It has a 75mm waterseal and a 50mm outlet with a 40mm reducer if required.
86
62
35 216
Code:TSG1
126
216
89
62
Vinyl Wet Floor Shower Waste Gully for Vertical Drainage
89
35
Vinyl Wet Floor Shower Waste Gully for Horizontal Drainage
31
45
200 200
50
200
200 130
110
90
130
110
90
200 130
89
200
130
132
16
132
200
200
40
63
40
40
63
63
28
22
28
83
53
83
53
200
158
158
63 63
Available with either grey or chrome cover and clamping ring
22
28
40
83
53
83
53
158
158
22
28
40
200
22
Designed for use with a shower waste pump - please see page 56. 91
83
53
91
With grey cover and clamping ring Code: TAD13 With chrome cover and clamping ring200Code: UGP1/P
91
91 91
45
31
Extremely shallow shower waste trap for gravity drainage. Waterless trap design allows use in confined spaces and will not freeze or evaporate. 200
45
200
200
31
14
200
Code: SLW1
45
83
53
Vinyl Wet Floor Shower Waste Gully 50 for Pumped Drainage 50
31
14
22
28
130
50
200
50
158
14
90
110
90
16
110
Vinyl Wet Floor Shower Slimline Waste Gully for Horizontal Drainage
52
45
31
130
130
200 132
130
14
16
132
0
DRAINAGE OPTIONS FOR Shower trays Slimline 35 Shower tray Waste Gully for Horizontal Drainage
Slimline 35 Shower tray Waste Gully for Vertical Drainage
Code: IMOR/H
Code: IMOR/V
A high flow shower tray trap with a polished chrome top cover. It has a 50mm water seal and a 43mm swivel joint outlet.
A high flow shower tray trap with a polished chrome top cover. It has a 50mm water seal and a 43mm swivel joint outlet.
115 15
115
46
87
71 50 43 198
186
111 221
56 61 90
Slimline 35 Shower tray Waste Gully for Pumped Drainage
Slimline 35 Shower tray Slimline Waste Gully for Horizontal Drainage
Code: IMOR/P
Code: SLW/TTI
Shower tray trap with chrome top cover. Designed for use with a shower waste pump kit- please see page 56.
Extremely shallow shower waste trap for gravity drainage. Waterless trap design allows use in confined spaces and will not freeze or evaporate. 120
19
112
60
42
43
15
42
19
32
49
91
85 160
221
53
ELECTRIC SHOWERS AND WASTE PUMPS For drainage that requires a waste pump we offer a choice of four electric showers, which provide a more economical and easy to install solution. These showers can be directly connected to the waste water pump rather than fitting a separate flow switch or sensor, together with the additional wiring connections.
Redring Selectronic Thermostatic Electric Shower and Waste Pump Pack
Mira Advance Flex Extra and Impey Whale Instant Match Pump Kit
8.5kW Code: SELP85LAP 9.5kW Code: SELP95LAP
9kW Code: MIRIMM
This provides everything you need in one pack with a choice of 8.5kW or 9.5kW shower and a low voltage pump, which meets european standards.
Technical Specification (Shower)
Technical Specification (Pump)
• Separate flow and temperature controls with push button start/stop and audible bleeps
• Maximum drainage 8 l/min
• 6 spray pattern shower head with rub clean nozzles for easy cleaning
• Self priming pump with • Large, colour contrasting rotary controls with protective cover raised areas to aid navigation • Low voltage transformer conforms • LED backlit flow and on/off buttons and to EN60742 audible click on temperature lever • IP 45 rated • Thermostatic temperature control for added • Active Link Diagnostics safety
• Extended riser rail (1m)
• Colour contrasting panel to aid navigation
• Additional time delay adjustment for pump start-up & over-run
• Adjustable maximum temperature setting for added safety
• 3 year guarantee extendable to 5 years with free registration
• Minimal maintenance - diaphragm pump action removes residual shower waste (hair, grit, gel) without blocking
• Phased shutdown reduces limescale and ensures a cool start for added safety for the next user
It is the only shower to meet the requirements of the Disability Discrimination Act (DDA). Technical Specification • Separate temperature controls with large push button start/stop and audible bleeps • Clear print control identification for ease of visibility and legibility • Large LED temperature readout display • Thermostatic temperature control for added safety • Adjustable maximum temperature setting for added safety • Eco Water-Save feature that automatically calculates and adjusts the optimum flow rate • Phased shutdown reduces limescale and ensures a cool start for added safety for the next user
54
This kit provides everything you need from an electric shower and waste water pump. Class leading features and pven reliability for complete peace of mind.
• Automatic shutdown after 30 minutes of inactivity
• 4 spray pattern showerhead with rub clean rubber nozzles for easy cleaning • Extended riser rail (1m) with wall or corner mounting options and easy one-handed adjustment of the height of the shower head • Best in class limescale resistance
Mira Advance Flex Extra
Triton Safeguard Care Digilink
Triton Safeguard T100 Care
9kW Code: MIRAFLEXEXTRA 9.0kW
8.5kW Code: TRSG/DL8.5
8.5kW Code: TRSG
Compatible with Impey Whale Instant Match Pump Kit SWP/IMM and Pump Kit SWP/WM (see page 54). Integral sensors ensure the pump flow rate matches the shower flow rate to provide the most efficient drainage. This also reduces noise output considerably, whilst also reducing wear on the pump.
Compatible with Electric Shower Pump Kit SWP/IMM (see page 56). Integral sensors ensure the pump flow rate matches the shower flow rate to provide the most efficient drainage. This also reduces noise output considerably, whilst also reducing wear on the pump.
Compatible with Electric Shower Pump Kit SWP/WM (see page 56)
Technical Specification • Separate flow and temperature controls with push button start/stop and audible bleeps • Large, colour contrasting rotary controls with raised areas to aid navigation • LED backlit flow and on/off buttons and audible click on temperature lever • Thermostatic temperature control for added safety • Colour contrasting panel to aid navigation • Adjustable maximum temperature setting for added safety
Technical Specification • Separate temperature control with large push button start/stop with audible bleeps • Thermostatic temperature control for added safety • Maximum temperature stop for added safety • Phased shutdown reduces limescale and ensures a cool start for added safety for the next user
Technical Specification • Separate temperature control and push button start/stop • Power on and low pressure indicators • Thermostatic temperature control for added safety • Adjustable maximum temperature setting for added safety • Phased shutdown reduces limescale and ensures a cool start for added safety for the next user • 2 spray pattern showerhead • Extended riser rail (1m)
• Adjustable timed shutdown allows the shower to automatically shutdown after a pre-selected time • 5 spray pattern showerhead with rub clean nozzles for easy cleaning • Extra long slide bar
• Phased shutdown reduces limescale and ensures a cool start for added safety for the next user • 4 spray pattern showerhead with rub clean rubber nozzles for easy cleaning • Extended riser rail (1m) with wall or corner mounting options and easy one-handed adjustment of the height of the shower head • Best in class limescale resistance
55
PUMPED DRAINAGE Shower Waste Pump Kits can be fitted when gravity drainage is not an option. The pump is activated by a flow switch installed in the water supply to the shower. When the shower is turned on water passes through the flow switch, activating the pump. Alternatively we offer two pumps that are controlled directly by a connection to an electric shower, without the need for a flow switch.
Impey Whale Switch Connect Kit Code: SWP
This is the original waste pump kit and has been successfully installed in over 150,000 homes across the UK. Technical Specification • Maximum drainage for electric showers 8l/min • Maximum drainage for mixer showers 12ltrs per minute (additional mixer valve conversion kit required) SWP/MX
Impey Whale Smoothflow Shower Waste Pump Kit Code:SWP/SFC Quiet operation, because the speed is regulated depending on the flow rate of water from the shower. This reduces noise output considerably, whilst also reducing wear on the pump. Technical Specification • Automatically adjusts to changes in shower flow rate
• Self priming pump with protective cover
• Compensates for changes in voltage from main electric supply
• Low voltage transformer conforms to EN60742
• Maximum drainage 12l/min
• 12 adjustable settings for electric & mixer showers
• Additional flow sensor is required for mixer showers
• Active link diagnostics
• Self priming pump with protective cover
• Variable speed settings for electric & mixer showers
• Low voltage transformer conforms to EN60742
• De-puddling cycle: pump turns on for a brief period, 15 min after shower is turned off
• IP45 Rated
• IP45 Rated
• 3 year guarantee extendable to 5 years with free registration
• 3 year guarantee extendable to 5 years with free registration
56
Impey Whale Instant Match Mira Kit Code: SWP/IMM
Impey Whale Direct Connect Kit
Designed to be specifically compatible with the Mira Flex Extra Electric Shower (shown on page 55). A digital signal from the Mira Advance Extra automatically adjusts the pump speed in relation to the shower flow rate.
This is designed to be compatible with the Mira Flex Extra and Triton Safeguard Care (shown on page 54-55), which will control the pump without the need of a separate flow switch.
Technical Specification
Technical Specification
• Maximum drainage 8 l/min
• Maximum drainage 8 l/min
• Self priming pump with protective cover
• Self priming pump with protective cover
• Low voltage transformer conforms to EN60742
• Low voltage transformer conforms to EN60742
• IP 45 rated
• IP 45 rated
• Also compatible with Safeguard Care Digilink
• Active Link Diagnostics
• Active Link Diagnostics
• 3 year guarantee extendable to 5 years with free registration
• 3 year guarantee extendable to 5 years with free registration
Code: SWP/WM
All our pumped kits are suitable for wetroom floors or shower trays and include all the fittings needed for a single feed electric shower installation, but please note that for mixer showers you will need a Mixer Shower Conversion Kit (see below) and for wetfloors you will require a TAD 13 shallow waste gully (see page 52).
Also includes two 22mm push-fit fixtures
Pump Service Kit Code: SWPDT Suitable for: Impey Whale shower waste pump Ref: SWP Impey Whale Smoothflow pump Ref: SWP/SFC Impey Digital shower waste pump Ref: IDP
Mixer Shower Conversion Kit for SWP Pump Code: SWP/MX
Mixer Shower Flow Sensor Venturi for SWP/SFC Code: SWP/SFSMK2
When fitting the pump in conjunction with a mixer shower this mixer shower conversion kit is required.
When fitting the pump in conjunction with a mixer shower an additional flow sensor is required.
Suitable for: Impey Whale shower waste pump Ref: SWP
Suitable for: Impey Whale Smoothflow pump Ref: SWP/SFC
15mm Flow Switch Kit Code: SWP/FS
Spare Pump Head Code: SWP/PH
Spare Pump Only Code: SWP/PO
Suitable for: Impey Whale shower waste pump Ref: SWP
Suitable for: All Impey Whale shower waste pumps
Suitable for: Replacement of all Impey Whale shower waste pumps
57
PUMPED DRAINAGE
Impey Digital Shower Waste Pump LH Code: IDP/LHMK2 RH Code: IDP/RHMK2
Mixer Shower Flow Sensor for IDP Pumps Code: SWP/FSFMK2
Pump Transformers
Quiet operation when in use, with the added advantage of being sealed in a watertight IP55 rated casing, which allows it to be sited in the showering area if required.
When fitting the pump in conjunction with a mixer shower an additional flow sensor and filter are required.
Suitable for: Impey Smoothflow pump Code: SWP/SFC Impey shower waste pump Code: SWP/WM
Suitable for: Impey Digital Shower Waste Pumps Ref: LH Code: IDP/LHMK2 RH Code: IDP/RHMK2
Code: SWP/IMT
Technical Specification • Maximum drainage 12ltrs per minute • Pumps up to 3m vertically • Tough IP55 rated water-tight box • Fully CE tested and approved • Adjusts to changes in shower flow rate • Filter free operation for low maintenance • Separate models are available for left or right hand feeds • IP 55 rated • 1 year guarantee
ACCESSORIES Xpelair LV100T Extractor Fan Code: LV100T
Apres Body Dryer Code: Bodydryer
The Apres Body Dryer is a complete all-over body dryer . Tested to rigorous safety standards, it fits neatly into most bathing and shower areas and helps make towels a thing of the past. Technical Specification • Voltage: 220/240V
Technical Specification • Suitable for splash zone 1
• Average Air outlet temperature: 21oC
• Single speed 12V SELV axial unit and remote SELV transformer
• 2 speed on/off air switch
• Adjustable timer function (2-20mins)
• Tested to EN60 335-2-23 1990
• Includes universal mounting kit and air operated backdraught shutter
• Sound Level: 70dB
• Air Movement: 85m3/hr 24 litres per second • Max Wattage: 13w
58
• Normal Output: 2.9kW
• ABS plastic construction
Code: SWP/TMK2
Suitable for: Impey Whale Instant Match Mira Kit Code: SWP/IMM
NOTES
59