PPS 7 Power System
PPS 7 Power System Shelf System
Shelf System Input Model
PPS 7-2100
PPS 7-2800
PPS 7-3500
PPS 7-4200
Input
230/400V 3-phase 208-240V 1-phase Site configurable
230/400V 3-phase 208-240V 1-phase Site configurable
230/400V 3-phase 208-240V 1-phase Site configurable
230/400V 3-phase 208-240V 1-phase Site configurable
Single input
Single input
Single input
Single input
3
4
5
6
Battery Outputs
1
1
2
2
Load Outputs
6
1
20
24
24V DC Version
Yes
N/A
N/A
N/A
48V DC Version
Yes
Yes
Yes
Yes
60V DC Version
Yes (on request)
Yes (on request)
Yes (on request)
Yes (on request)
PCU
PCU
PCU
PCU
1
1
3
3
Yes
Yes
Yes
Yes
Dimensions (WxHxD)
485x133x305mm
485x133x305mm
485x133x305mm
582x266x305mm
Mounting
19”, ETSI, or flush ETSI mount (site configurable)
19”, ETSI, or flush ETSI mount (site configurable)
19”, ETSI, or flush ETSI mount (site configurable)
23”
Cable Entry
Top
Top
Top
Top
Temp. Comp. Charge
Yes
Yes
Yes
Yes
Ethernet Network Interface
Yes
Yes
Yes
Yes
Modem Interface
Yes
Yes
Yes
Yes
Inputs
(max.)
Output Rectifier Modules
(max.)
Features Supervision
Battery Battery Symmetry Inputs (max.)
Low Voltage Battery Disconnection (LVBD)
Mechanical
Description
Features
PPS 7 modular DC power shelf systems provide large power system features in cost-effective, rack-mounted form factors. These shelf power solutions provide rectification, system management, and power distribution while maintaining high reliability and offering flexibility for future expansion. The PPS 7 systems are based on hot-swappable rectifier modules output power available at 450, 560 or 670W per module.
• • • • •
Options
Note: All specifications are subject to change without notification.
11V0005-036 PPS7 SY V3.0
www.power-one.com
System management is accomplished through messages and alarms displayed on the system controller’s (PCU) LCD screen and can also be displayed remotely via the PC-based PowCom software package.
High reliability Simple installation and operation LCD display for self-guided controller operation RS232 interface for remote operation Intelligent battery management: • Temperature compensation (requires optional cables) • Programmable battery load testing with data logging • Symmetry (requires optional cables) • Programmable low voltage disconnect • Optional Ethernet (SNMP compatible) interface module • Natural convection cooling - no fans • International standards compliance
TM
www.power-one.com
PPS 7 Power System Shelf System
System Components
System Configurations
Rectifier Modules The PPS 7 system utilizes plug-in rectifier modules that are based on a soft-switching approach. Features include 3 LEDs for rectifier status indication, thermal shutdown, and input overvoltage disconnection with an automatic reset (only on PMP 7 modules). Rectifier Features PPS 7-2100 System
PPS 7-2800 System
An all-in-one 3U high shelf system that can be installed in both 19” and ETSI telecom cabinet solutions. The system subrack can accommodate up to three rectifier modules, a supervision module (PCU) and DC distribution with a single battery breaker and six load breakers.
An all-in-one 3U high shelf system that can be installed in both 19” and ETSI telecom cabinet solutions. The system subrack can accommodate up to four rectifier modules, a supervision module (PCU) and DC distribution with a single battery breaker and a single load breaker.
Model
Voltage
Power (max.)
Current (max.)
PMP 5.24 SIC 110*
24V DC
448W
16A
PMP 5.48 SIC 110*
48V DC
448W
8A
PMP 7.24 SIC
24V DC
560W
20A
PMP 7.48 SIC
48V DC
672W
12A
PMP 7.60 SIC
60V DC
635W
9A
*110V AC input
Supervision Modules Advanced system supervision is accomplished using a microprocessor based control module that allows both local and remote system monitoring. PCU Features
PPS 7-3500 System
PPS 7-4200 System
An all-in-one 6U high shelf system that can be installed in 19” and ETSI telecom cabinet solutions. The system subrack can accommodate up to five rectifier modules, a supervision module (PCU) and DC distribution with up to two battery breakers and twenty load breakers.
An all-in-one 6U high shelf system that can be installed in 23” standard telecom cabinet solutions. The system subrack can accommodate up to six rectifier modules, a supervision module (PCU) and DC distribution with up to two battery breakers and twenty four load breakers.
• • • • • • • •
Menu guided operation RS232 interface for remote operation Battery management and testing Low voltage battery disconnect (LVBD) Temperature compensation Battery symmetry measurement Optional Ethernet interface through SNMP and/or TCP/IP Partial load disconnection (PLD)
PPS 7 Power System Shelf System
System Components
System Configurations
Rectifier Modules The PPS 7 system utilizes plug-in rectifier modules that are based on a soft-switching approach. Features include 3 LEDs for rectifier status indication, thermal shutdown, and input overvoltage disconnection with an automatic reset (only on PMP 7 modules). Rectifier Features PPS 7-2100 System
PPS 7-2800 System
An all-in-one 3U high shelf system that can be installed in both 19” and ETSI telecom cabinet solutions. The system subrack can accommodate up to three rectifier modules, a supervision module (PCU) and DC distribution with a single battery breaker and six load breakers.
An all-in-one 3U high shelf system that can be installed in both 19” and ETSI telecom cabinet solutions. The system subrack can accommodate up to four rectifier modules, a supervision module (PCU) and DC distribution with a single battery breaker and a single load breaker.
Model
Voltage
Power (max.)
Current (max.)
PMP 5.24 SIC 110*
24V DC
448W
16A
PMP 5.48 SIC 110*
48V DC
448W
8A
PMP 7.24 SIC
24V DC
560W
20A
PMP 7.48 SIC
48V DC
672W
12A
PMP 7.60 SIC
60V DC
635W
9A
*110V AC input
Supervision Modules Advanced system supervision is accomplished using a microprocessor based control module that allows both local and remote system monitoring. PCU Features
PPS 7-3500 System
PPS 7-4200 System
An all-in-one 6U high shelf system that can be installed in 19” and ETSI telecom cabinet solutions. The system subrack can accommodate up to five rectifier modules, a supervision module (PCU) and DC distribution with up to two battery breakers and twenty load breakers.
An all-in-one 6U high shelf system that can be installed in 23” standard telecom cabinet solutions. The system subrack can accommodate up to six rectifier modules, a supervision module (PCU) and DC distribution with up to two battery breakers and twenty four load breakers.
• • • • • • • •
Menu guided operation RS232 interface for remote operation Battery management and testing Low voltage battery disconnect (LVBD) Temperature compensation Battery symmetry measurement Optional Ethernet interface through SNMP and/or TCP/IP Partial load disconnection (PLD)
PPS 7 Power System
PPS 7 Power System Shelf System
Shelf System Input Model
PPS 7-2100
PPS 7-2800
PPS 7-3500
PPS 7-4200
Input
230/400V 3-phase 208-240V 1-phase Site configurable
230/400V 3-phase 208-240V 1-phase Site configurable
230/400V 3-phase 208-240V 1-phase Site configurable
230/400V 3-phase 208-240V 1-phase Site configurable
Single input
Single input
Single input
Single input
3
4
5
6
Battery Outputs
1
1
2
2
Load Outputs
6
1
20
24
24V DC Version
Yes
N/A
N/A
N/A
48V DC Version
Yes
Yes
Yes
Yes
60V DC Version
Yes (on request)
Yes (on request)
Yes (on request)
Yes (on request)
PCU
PCU
PCU
PCU
1
1
3
3
Yes
Yes
Yes
Yes
Dimensions (WxHxD)
485x133x305mm
485x133x305mm
485x133x305mm
582x266x305mm
Mounting
19”, ETSI, or flush ETSI mount (site configurable)
19”, ETSI, or flush ETSI mount (site configurable)
19”, ETSI, or flush ETSI mount (site configurable)
23”
Cable Entry
Top
Top
Top
Top
Temp. Comp. Charge
Yes
Yes
Yes
Yes
Ethernet Network Interface
Yes
Yes
Yes
Yes
Modem Interface
Yes
Yes
Yes
Yes
Inputs
(max.)
Output Rectifier Modules
(max.)
Features Supervision
Battery Battery Symmetry Inputs (max.)
Low Voltage Battery Disconnection (LVBD)
Mechanical
Description
Features
PPS 7 modular DC power shelf systems provide large power system features in cost-effective, rack-mounted form factors. These shelf power solutions provide rectification, system management, and power distribution while maintaining high reliability and offering flexibility for future expansion. The PPS 7 systems are based on hot-swappable rectifier modules output power available at 450, 560 or 670W per module.
• • • • •
Options
Note: All specifications are subject to change without notification.
11V0005-036 PPS7 SY V3.0
www.power-one.com
System management is accomplished through messages and alarms displayed on the system controller’s (PCU) LCD screen and can also be displayed remotely via the PC-based PowCom software package.
High reliability Simple installation and operation LCD display for self-guided controller operation RS232 interface for remote operation Intelligent battery management: • Temperature compensation (requires optional cables) • Programmable battery load testing with data logging • Symmetry (requires optional cables) • Programmable low voltage disconnect • Optional Ethernet (SNMP compatible) interface module • Natural convection cooling - no fans • International standards compliance
TM
www.power-one.com
PMP 5 Rectifier Module
Description The Power-One PMP 5 rectifier module provides a cost-effective power solution in a high density footprint. Built on the latest advances in the resonance switch mode approach (soft-switching), the PMP 5 is the next evolution in our small convection cooled rectifier series. Optimized for telecom applications, the module is designed to work in a multitude of different subrack/shelf configurations incorporating the PowerOne PCU controller and various distribution options.
Features • 115/230 VAC input • 24V, or 48VDC output • Power factor correction • Active load sharing • Hot-swappable PPS 5/7 System Shown
• International standards compliance • Natural convection cooling • Low weight
www.power-one.com
PMP 5 Rectifier Module Input
Mechanical PMP 5.48
PMP 5.24-110
PMP 5.48-110
Model
PMP 5.24
Input Voltage
161-276V AC single phase, (44-66Hz)
80-138V AC single phase, (44-66Hz)
Current (max.)
87%
Tolerance
Vout +/- 1%
Operating Temperature*
-25 to +55°C (+70°C for max. 2hrs.)
Transient Response
+/- 5% at load variation 10-90% or 90-10%, recovery time 10ms
Storage Temperature
-40 to +85°C
Load Sharing
.98 Typical
Alarm History
40 event alarm history
Alarm Contacts
Four free alarm contacts (max. 60V, 1A) Two open collector outputs for LVD
Alarms
Output Voltage
42V-58VDC (54VDC Nominal)
Output
up to 500A in 4 subrack/ shelf system
(at 208/240VAC)
1350W (up to 50°C) per rectifier 1200W (up to 65°C) per rectifier
Efficiency
90% typical
Power
Mechanical Dimensions (WxHxD)
584.2/482.6 x 133.35 x 274.32mm (23/19 x 5.25 x 10.8in.)
Shelf without Controller
584.2/482.6 x 88.9 x 274.32mm (23/19 x 3.5 x 10.8in.)
Mounting
19/23in. rack mount
Cooling
Fan Cooled, speed controlled and alarmed
Battery Battery Disconnection
An optional feature that allows voltage or time controlled disconnection of batteries.
Boost Charging
Manual time controlled or automatic boost charging with adjustable time and voltage levels.
Battery Test
Automatic or manual testing of batteries up to four times per year. Variables include: test duration, end voltage, Ah, and allowable symmetry variation.
-40 to +65°C, (Derated to 700W from 65 to 75°C)
Storage Temperature
-40 to +85°C
Vibration/ Shock Tolerance
(NEBS) GR-63-CORE Level 3
Earthquake
Zone 4 compliant
Safety
CSA C22-2 No. 950, UL 1950 and IEC60950/ EN 60950
ESD Immunity
EN61000-4-2, Level 4
Symmetry Measurement
Temperature Compensation Charging
Optional tool that measures batteries for early detection of thermal runaway. Allows for separate measurements of up to three parallel battery branches, each divided into four blocks. Allows continuous adjustment of output voltage according to battery temperature. Feature includes adjustable compensation factor and separate thresholds for alarms.
Note: All specifications are subject to change without notification.
RF Immunity
EN61000-4-2, Level 3
Surge Immunity
IEC/ EN61000-4-5, Level 4
Fast Transient/ Burst Immunity
IEC/ EN61000-4-4, Level 4
11V0005-060 Xscend SY V3.0
Description Xscend™, the new shelf based power system from Power-One is designed to meet a broad range of customer applications through flexibility, simplicity and scalability.
Flexible The Xscend power system offers solutions that meet today's demands by addressing tomorrow's problems, including: power density, reliability, accessibility, upgrades, and space requirements. Utilizing state-of-the art rectifier technology, an integrated microprocessor controller platform and interchangeable distribution modules, the Xscend power system provides a diverse front-access power solution in only a 3 rack unit (5.25in.) vertical and a 300mm (12in.) deep cabinet area. Xscend rectifiers operate using a phase shifted transitional resonant zero-voltage switching technology that offers increased system life and reliability by reducing component stresses. The same engineering strategy gives Xscend the ability to generate up to 1350W 3 in just 3.5-inch (2RU) of vertical space, resulting in a power density of over 9 W/in . In addition, Xscend’s forward thinking horizontal cooling design allows shelves to be placed directly above or below customer equipment, safely increasing the amount of space that can be used for revenue generating equipment and negating the need for airflow clearance above or below the unit.
Simple
Other Technical Data Operating Temperature
High DC Voltage Low DC Voltage Load/ Battery Disconnection Battery Fuse Failure DC Fuse Failure Module Failure Main AC Failure Battery Failure Symmetry Failure High Temperature High Load
The Xscend power system is designed for ease of use through its innovative control and monitoring system. To accomplish this the Xscend is supervised by a single rack unit microprocessor controller (XCS) that offers user-friendly menus and commands that allow an operator to monitor system conditions, capacity, battery parameters and circuit breaker status.
• AC Input 180-264 Vac • 48VDC Rectifier with up to 1350W output • 24V available during 2nd release
System control can also be accomplished by using an RS232 digital communication bus that allows for remote operation through a Modem, Ethernet (SNMP capable), or standard form C contacts. The XCS controller also works hand-in-hand with the easy to use Power-One POWCOM software package that allows for total system assessment and password controlled parameter adjustments.
• Fan cooled rectifier modules
Scalable
• Extensive remote monitoring capabilities
In keeping with today's unpredictable market requirements, PowerOne's Xscend design targets a mechanical package approach that permits the power system to expand with ease. Each 23 inch shelf can be fitted with up to five rectifier units delivering up to 125A of system power, while each 19 inch rack can be fitted with up to four rectifiers providing 100A. Additional shelves, distributions and rectifiers can be added to a system offering a high system level density as well as system level modularity providing low start up costs and an easy growth path.
www.power-one.com
Features
• Front access design • Temperature hardened -40°C to +65°C • 19” or 23” mounting arrangement
• Modular DC distribution with LVD • Power Factor Correction • ETSI Compatible • Modular system from 25A to 500A
www.power-one.com
XR1448 Rectifier Module
Description The Power-One Xscend™ rectifier provides extremely reliable DC power in the highest possible density. The module incorporates the latest in power monitoring solutions through an internal microprocessor giving up to the second updates to the system controller and adjacent rectifiers. This guarantees tightly controlled load sharing among rectifiers, and providing status and identification information to the controller. At only two rack units high, these compact rectifiers provide up to 1350W and fit up to five rectifier modules in a 23in. rack or four modules in a 19in. rack. Designed with diversity in mind, the Xscend rectifier is able to operate in a complete range of indoor and outdoor applications.
Features • Compact 2 rack unit height • Front or mid-mountable • 208/240 single phase input • Hot-swappable • No adjustments required • 90% typical efficiency Xscend Power System
• Active and droop current sharing • International Standards Compliance
www.power-one.com
XR1448 Rectifier Module
Input
Mechanical
Model
XR1448
Dimensions
102.87 x 91.44 x 241.3mm (4.05 x 3.6 x 9.5in.)
Input Voltage
180-264VAC (47-63Hz)
Weight
1.9kg (4.12lbs.)
Current (max.)
9.3A @180VAC
Cooling
Fan cooled, speed controlled and alarmed.
Inrush Current
25A @ 25°C
Vibration/ Shock
Zone 4 compliant
Power Factor
>0.98 typical
Mounting
in 19”/ 2U subrack up to 4 modules in 23”/ 2U subrack up to 5 modules
Fuse
12.5A- line, 12.5A- neutral
Connection
FCI power connector™
EMC
EN 61000-6-2, EN 61000-6-3, FCC Part 15 Class B
Output Model
XR1448
Output Voltage
42-58VDC
Power (max.)
1350W
Current
25A
Efficiency
90% typical
Tolerance
Vout +/- 1.0%, constant voltage regulation
Transient Response
+/- 4% recovery time 2ms
Load Sharing
+/- 5%
Ripple
Other Technical Data Safety
CSA C22-2 No. 950, UL 1950 and IEC60950/ EN 60950
Protection
Short circuit proof, automatic power/ current limiting, selective shutdown of modules at excessive output voltage.
Alarms
High output voltage/ shutdown, Low voltage/ module failure Each alarm has an LED indicator on the front panel and a common potential free contact for external signalling.
Indications
Green LED
Power ON
Yellow LED
Current limit/ thermal protection
Red LED
Module failure
Audible Noise
86%
Current Rating per Breaker Panel (max.)
400A
400A
Description Compac Racks are modular power systems designed for applications requiring 50 to 1200 amps. An almost limitless combination of rectifiers, breaker panels, and battery shelves are available. Standalone configurations with up to 750 Ah of battery backup are available. Each rack can hold up to 24 rectifiers or a maximum of five battery trays. Systems can be ordered with ultimate capacity for future additions of rectifiers and batteries.
Output
Components Controller
DMAC Controller
DMAC Controller
Rectifier
NHS48/50
NHS24/100
Standard features include timer-controlled equalize and battery test functions, current and voltage display meters, LED’s for local alarm indications, user-programmable alarm set inputs, and a set of form “C” alarm contacts for remote monitoring. Optional features include low voltage disconnect, complete battery systems, and battery temperature compensation.
Low Voltage Disconnect (LVD) Contactor Rating
800-1200A options
800-1200A options
Disconnect Voltage
42V
21V
LVD Disconnect Range
31 - 51V
18 - 26V
Reconnect Voltage
6.5V above disconnect voltage
4.7V above disconnect voltage
(User Adjustable)
The Compac systems distribution architecture can be designed for load shedding during power outages, allowing critical loads to stay up longer on battery power by eliminating non-critical equipment loads earlier in the discharge cycle.
Mechanical Width
19 or 23in.
Battery Tray Depth
21, 25 or 29in.
Mounting (base)
Mounting holes provided
Altitude Range
13,000 ft., derate 7°C/1000ft. above 8,000 ft.
Operating Temperature
-0 to +50°C
Features • • • • • • •
Storage Temperature
-50 to +85°C
Temperature Coefficient
+/- 0.0008%/°C from 0-50°C, after one hour warm up
Humidity
10-90% RH, operating, 5-95% storage, non-condensing
Heat Dissipation per Rectifier
1,255 BTU’s per hour at full load
Modular systems from 50-1200A 24V or 48V outputs 180-264 VAC single or three-phase inputs
• • •
Small footprint Scalable N+1 redundancy with current sharing
Extensive monitoring capabilities Options include integrated battery systems and extensive breaker and fuse layouts
Rack widths of 19in. or 23in. Hot-swappable rectifiers
Power factor correction (PFC)
• •
A single seven foot rack can provide distribution, 400A of rectifiers, and 750Ah of batteries International standards compliance
Note: All specifications are subject to change without notification.
11V0005-047 CMPSYS V3.0
www.power-one.com
www.power-one.com
NHS Rectifier Module
Description The Power-One NHS rectifier modules provide extremely reliable DC power output for use in our Compac™ series of power systems. NHS rectifier modules are hot-swappable and provide a complete set of interface signals. At only 3 rack units high, these compact rectifiers allow for up to four modules in each 23in. rack and provide up to 50A at 48V or up to 100A at 24V. With full power available up to 50°C, these rectifiers are ideal for any indoor and outdoor applications.
Features • Compact 3 rack-unit height • 24V and 48V rectifiers • 50A output at 48V • 100A output at 24V • 180-264 single or three phase inputs • Hot-Swappable, plug-and-play rectifiers • High power density (9.8W/in3) • High reliability, >700,000 hours MTBF • Power factor correction • Active current sharing • International Standards Compliance
www.power-one.com
NHS Rectifier Module Mechanical
Input Model
NHS24/100
NHS48/50
Input Voltage
180 - 264V AC single phase, (50-60Hz)
Current
15A @ 230V
Soft Start
0.99 (50-100% load)
AC Transient
3000V, 2 Joules
Dimensions
5 x 5 x 12.25 in. (12.7 x 12.7 x 31.1cm )
Weight
12.6 lbs.
Cooling
Fan
15A @ 230V
Other Technical Data Safety
UL 1950, CSA 22-2 #950 TUV EN60950
Alarms
High voltage, low voltage, loss of AC, rectifier failure, minor and major alarm Overcurrent Protection: 100105% constant currenty type. Automatic recovery upon removal of fault, short circuit current 86%
>86%
(@ 40-90%Load)*
Voltage Regulation Transient Response
Protection
Overtemperature: Rectifier will shut down if temperature reaches an unsafe level, restart is automatic
+/- 0.4% +/- 4% at load variation 10-90% or 90-10%, recovery time 10ms
Overvoltage: Latching high voltage shutdown @ 60VDC +/- 1%
Green LED
Input power within acceptable range
Red LED
Overvoltage shutdown or rectifier alarm
Indications
Load Sharing